SNMM 250724 T9225 Wendeplatten - Tungaloy
Take advantage of the combination of a robust CVD-coated carbide grade, a 2.4 mm corner radius and ISO conformity to maintain process stability in medium to heavy steel turning; order genuine inserts or consult Metav Werkzeuge for matching holders and fast delivery. SNMM 250724 T9225 ISO turning insert for turning (Tungaloy) The SNMM250724 T9225 is an ISO-compliant turning insert intended for medium to heavy steel turning, combining a wear-resistant CVD coating with a stable corner radius for interrupted cuts. CVD-coated carbide for increased wear resistance 2.4 mm corner radius for stable cutting action Suitable for medium to heavy steel turning Consistent performance under varying cutting conditions The combination of a CVD-coated carbide grade and a substantial edge radius delivers consistent cutting performance where chip formation and edge stability matter. The coating enhances flank and crater wear resistance while the substrate supports toughness, so the insert tolerates changes in engagement and light interruptions without premature failure. This results in fewer tool changes and a more predictable machining rhythm, which supports efficient scheduling and higher machine uptime. Reliable mounting and quick tool set-up for productive turning Designed with a cylindrical hole and a square 25 mm footprint, the insert offers straightforward clamping in standard ISO holders. The 7.94 mm thickness and 90° included angle ensure a robust seating and good support under radial loads. Compatibility depends on form, clearance angle, tolerance class, clamping method, size and thickness, so the correct match between holder and insert secures repeatable results and reduces setup time in production environments. Enhanced edge stability for demanding steel applications As a universal grade for medium to heavy steel turning, the carbide specification provides a balance of wear resistance and toughness to cope with variable feeds and depths of cut. The single-sided chipbreaker helps to control chip shape and evacuation in typical turning operations, improving surface finish and reducing the risk of edge failure during marginal cutting conditions. The result is a more reliable process and a steady quality of machined components. System compatibility that supports economic machining Being ISO-standardised, the insert integrates into a system comprising the insert, a matching external holder or boring bar, a backing shim or clamping set and replacement screws. This familiar system architecture makes inventory management and tool planning simpler and helps to avoid costly mismatches. When paired with appropriate holders, the insert contributes to stable cutting forces and lower overall machining costs through extended tool life and reduced downtime. Contact Metav Werkzeuge for tailored holder recommendations and to source genuine Tungaloy inserts that support reliable production workflows Technical data Article number: 6780699 Manufacturer SKU: TUN6780699 Model series: ISO-Drehwendeschneidplatten Brand: Tungaloy Facts Corner radius: 2.4 mm Plate size: 25 mm Plate thickness: 7.94 mm Clearance angle: 0° Included angle: 90° Special features CVD-coated cemented carbide (grade T9225) Single-sided chipbreaker Square shape Cylindrical hole (with hole) ISO designation SNMM250724 Suitable for turning Compatibility: form, clearance angle, tolerance class, clamping, size, thickness FAQ What materials is this insert designed for? The SNMM250724 T9225 insert is specified as a robust universal grade for medium to heavy steel turning, offering a balance of wear resistance and toughness for such materials. How does the chipbreaker affect machining? The single-sided chipbreaker on the SNMM250724 T9225 improves chip control and evacuation in typical turning operations, which supports better surface finish and safer chip handling. Which holders are compatible with this ISO insert? Compatibility is determined by insert form, clearance angle, tolerance class, clamping method, size and thickness; use holders designed for SNMM-style square inserts with a 25 mm seat and compatible clamping geometry. Can the insert handle interrupted cuts? Yes, the CVD-coated carbide grade T9225 and the 2.4 mm corner radius deliver increased toughness and edge strength, making the insert suitable for applications with light interruptions. Is this an original manufacturer item? The item is an original, brand-new insert supplied as a genuine Tungaloy product (SKU TUN6780699). Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMM 250724 T9235 Wendeplatten - Tungaloy
Reliable machining under unstable conditions is achieved by the combination of a CVD-coated carbide grade for toughness and a 2.4 mm nose radius that supports robust finishes; the ISO-standard form ensures straightforward integration with suitable holders. Order the SNMM250724 insert directly via Metav Werkzeuge or request selection advice from our consultants. SNMM 250724 T9235 – Turning insert by Tungaloy The SNMM250724 T9235 is an ISO-standard turning insert intended for external and internal turning of steel, offering a tough grade for interrupted cuts and unstable setups. ISO-conform turning insert SNMM250724 CVD-coated carbide grade T9235 2.4 mm nose radius for robust finishes Cylindrical hole, 0° relief angle Consistent performance for unstable turning conditions The SNMM250724 presents a CVD-coated carbide body in grade T9235, engineered to withstand the mechanical shocks of interrupted cuts and less rigid setups. The tough grade reduces chipping at the cutting edge when machining steel at reduced cutting speeds, which helps maintain dimensional stability across a batch. For operations where tool breakage risk is elevated, this insert provides a predictable wear pattern and longer usable life, supporting uninterrupted production runs and fewer changeovers. Reliable compatibility with ISO tooling systems As an ISO-standard insert, the form and dimensions of this plate determine holder compatibility: form, relief angle, tolerance class, fixing method, size and thickness must match the clamping system. The insert’s cylindrical hole and square plate form simplify secure mounting in compatible external holders or boring bars. The listed 0° relief angle indicates a neutral clearance geometry that suits a range of turning strategies; matching holder geometry accordingly ensures correct rake and stability, improving edge life and surface consistency. Material and coating explained for production planners Made from carbide with a CVD coating, the grade focuses on edge robustness rather than maximum speed; the coating increases wear resistance while the substrate maintains toughness. This combination is particularly suitable for machining steel where thermal loads are moderate and mechanical shocks occur. For planners, the result is predictable tool life under interrupted cuts and a dependable finish quality without the need for constant parameter readjustment. Operational benefits and recommended use cases The 2.4 mm nose radius supports a robust profile that balances strength and achievable surface quality for general turning tasks. The one-sided chipbreaker is intended to control chip formation in typical external and internal turning operations, reducing the risk of tangling in unstable setups. Use this insert where interrupted cuts, variable clamping or softer programme strategies would otherwise shorten tool life; its durability reduces downtime and contributes to steady productivity. For application-specific guidance or to source the SNMM250724 T9235 turning insert from Tungaloy, contact Metav Werkzeuge quoting SKU TUN6785890 or reach our specialists at info@metav-werkzeuge.com / +49 2822 7131930 to confirm the optimal holder and cutting parameters Technical data Article number: 6785890 Manufacturer SKU: TUN6785890 Model series: ISO-Drehwendeschneidplatten Designation: SNMM250724 T9235 Material: Carbide Coating: CVD Application: Turning Facts Nose radius: 2.4 mm Plate size: 25 mm Plate thickness: 7.94 mm Relief angle: 0° Included hole: Cylindrical Insert angle: 90° Special features One-sided chipbreaker CVD-coated carbide grade T9235 ISO-standard form SNMM Suitable for interrupted cuts and unstable conditions Square plate form FAQ How is this insert typically applied in production? The SNMM250724 T9235 turning insert from Tungaloy is used for external and internal turning of steel where interrupted cuts or less rigid set-ups occur; its grade and geometry favour stability and edge toughness. What material and coating does the SNMM250724 use? This Tungaloy insert is made of carbide with a CVD coating; the combination is chosen to balance wear resistance and edge strength for machining steel. Which holders are compatible with this insert form? Compatibility depends on matching the ISO form, relief angle, tolerance class, fixing method, size and thickness; SNMM250724 requires a holder accepting square ISO inserts with a cylindrical hole and the specified dimensions. What are the advantages of the 2.4 mm nose radius? The 2.4 mm nose radius provides a robust cutting profile that resists chipping and helps achieve consistent surface quality in roughing and general finishing under unstable conditions. What does the T9235 grade mean for cutting strategy? Grade T9235 is a tougher CVD-coated carbide intended for lower cutting speeds and interrupted cuts; it prioritises edge integrity and repeatable wear behaviour over maximum productivity speeds. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMM 250724 T9235 Wendeplatten - Tungaloy
Take advantage of a tough CVD-coated carbide grade optimised for steel and unstable cutting conditions, combined with an ISO-compliant square design that simplifies tool management; order directly via Metav Werkzeuge or request application advice from our consultants. SNMM 250724 T9235 Turning insert (ISO) by Tungaloy SNMM 250724 T9235 is an ISO-format indexable turning insert intended for external and internal turning applications; compatible holders should match form, relief angle, tolerance class, attachment and size. ISO-compliant square insert, 25 mm Tough CVD-coated carbide grade T9235 2.4 mm corner radius for robust chamfering Single-sided chipbreaker for interrupted cuts Stable cutting where interrupted cuts occur The CVD coating on this cemented carbide grade provides a resilient surface that tolerates shocks and thermal variation, while the tough grade T9235 keeps the cutting edge intact at reduced cutting speeds. For operations with frequent interruptions or variable rigidity, this combination reduces the risk of edge chipping and unplanned rework. The result is more consistent cycle times and fewer tool changes, which supports higher uptime in mixed production environments. Easy integration into existing tool systems Designed as an ISO-compliant insert, the square plate fits standard external holders and boring bars when the holder matches the insert’s geometry, relief angle and tolerance class. The 25 mm size and 7.94 mm thickness are common dimensions that simplify inventory and machine planning. The insert’s cylindrical hole ensures secure clamping and repeatable positioning, allowing straightforward indexing of corners where applicable and consistent machining results across batches. Predictable results and longer effective life A 2.4 mm corner radius provides a compromise between strength and finish: it increases edge robustness while still permitting acceptable surface quality on most steels. The single-sided chipbreaker directs chips reliably during intermittent work, assisting in chip control and protecting the cutting edge under unstable conditions. Combined, these attributes make the insert suitable for shops prioritising process security and repeatable component quality rather than maximising cutting speeds. Practical notes on application and selection Select the SNMM 250724 T9235 when machining steels in less rigid setups or when interrupted cuts occur frequently. Choose appropriate feed and depth to match the 2.4 mm radius and the intended surface finish; a lower cutting speed is often advantageous with this tough grade. Remember that optimal performance depends on matching holder geometry and clamping method to the insert’s form, free rake and tolerance class. For tailored application advice or to procure the SNMM250724 T9235 turning insert from Tungaloy, please contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for prompt technical guidance and availability Technical Data Manufacturer article number: 6786058 SKU: 6786058-Tungaloy Manufacturer SKU: TUN6786058 Facts Insert designation: SNMM250724 Insert size: 25 mm Thickness: 7.94 mm Included angle: 90° Corner radius: 2.4 mm Free rake angle: 0° Hole style: cylindrical Special features Material: cemented carbide Coating: CVD Grade: T9235 (tough grade) Chipbreaker: single-sided Application: external and internal turning Standard: ISO turning insert Compatibility determined by form, relief angle, tolerance class, attachment, size and thickness FAQ What materials is the SNMM250724 T9235 best suited for? The SNMM250724 T9235 turning insert by Tungaloy is optimised for machining steels, particularly where interrupted cuts or unstable clamping demand a tougher grade; the CVD coating enhances wear resistance during such operations. How does the T9235 grade improve performance in interrupted cuts? T9235 is a tough, CVD-coated carbide formulation that reduces edge chipping and flank wear under shock loads; the material properties of the SNMM250724 T9235 help maintain cutting-edge integrity at lower cutting speeds. Will the SNMM250724 fit my existing holder? Compatibility depends on matching the insert form, relief (free) angle, tolerance class, attachment method, size and thickness; check these parameters against the holder specification to ensure correct fit and clamping. What effect does the 0° free rake angle have on cutting? A 0° free rake provides a neutral cutting geometry that balances edge strength and cutting forces, aiding stability in tougher steels and interrupted machining where a more positive rake could compromise edge life. How does the single-sided chipbreaker influence chip control? The single-sided chipbreaker on this square insert channels chips predictably during intermittent cuts, improving evacuation and reducing the likelihood of chip re-cutting; this contributes to more consistent surface quality under variable conditions. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMM 250732 T9215 Wendeplatten - Tungaloy
Take advantage of a CVD‑coated carbide grade that combines wear resistance with fracture toughness, complemented by a 3.2 mm corner radius and a true ISO square form for reliable mid‑range steel turning; order via Metav Werkzeuge or consult the technical team for holder compatibility and process optimisation. SNMM 250732 T9215 — Turning insert (Tungaloy) The SNMM 250732 T9215 is a square, ISO‑standard turning insert designed for productive external and internal turning of medium steels, offering a robust chip control geometry for continuous to slightly interrupted cuts. CVD-coated carbide grade T9215 ISO square insert, 90° cutting angle TUS chipbreaker for steady chips 3.2 mm corner radius for robustness Increased productivity for medium‑steel turning The CVD‑coated carbide grade T9215 delivers a balance between high wear resistance and fracture toughness, which supports higher cutting speeds and extended tool life under steady production conditions. The square format with a 90° cutting angle allows for straightforward setup in ISO holders, while the TUS chipbreaker produces predictable chip forms that reduce downtime from chip handling. These characteristics translate into fewer insert changes and a smoother machining rhythm for parts produced in series or batches. Stable tool performance and system compatibility Compatibility with the toolholder is defined by insert form, 0° relief angle, tolerance class, fastening method, size and thickness; this insert is supplied in the ISO system so that matching external holders or boring bars, a suitable shim/clamp set and replacement screws complete the assembly. The square geometry and the 3.2 mm corner radius contribute to edge strength, making the insert well suited to slightly interrupted cuts and typical external and internal turning tasks in steel. Where stability is limited, selecting the appropriate holder and cutting parameters ensures repeatable surface quality and process reliability. Practical machining guidance and benefits For machining medium steels, adopt feed and speed settings that exploit the T9215 grade’s wear tolerance while limiting impact loads to preserve the cutting edge. The 7.94 mm plate thickness and the cylindrical hole mount the insert securely, enhancing positional repeatability and reducing vibration. As a component of an ISO insert system, the part integrates with existing toolholders and clamping kits, enabling quick changeovers and predictable performance in production environments. The result is improved cycle times and consistent component quality with reduced scrap rates. Secure reliable performance with Tungaloy's T9215 inserts through Metav Werkzeuge — contact info@metav-werkzeuge.com or call +49 2822 7131930 for application advice and holder recommendations Technical data Article number: 6773856 SKU: 6773856-Tungaloy Manufacturer SKU: TUN6773856 Model series: ISO turning inserts Material: Carbide Grade / coating: T9215, CVD coating ISO designation: SNMM250732-TUS Application: Turning Facts Plate size: 25 mm Plate thickness: 7.94 mm Corner radius: 3.2 mm Relief angle: 0° Cutting angle: 90° Special features Square plate form TUS chipbreaker Cylindrical hole mounting Suitable for continuous to slightly interrupted cuts Optimised for medium steels with high productivity FAQ What materials is this insert suitable for? The SNMM 250732 T9215 insert is optimised for medium steels; the T9215 carbide grade provides wear resistance and fracture toughness for productive steel turning. How does the chipbreaker influence machining? The TUS chipbreaker on this ISO‑format insert produces steady chip forms that simplify evacuation and reduce the risk of chip‑related interruptions during continuous turning operations. Which holders are compatible with this insert? Compatibility depends on insert form, relief angle and thickness; the SNMM250732-TUS fits ISO holders and boring bars that accept square inserts with a cylindrical hole and 7.94 mm thickness. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMM 250732 T9225 Wendeplatten - Tungaloy
Benefit from the reliable combination of a CVD-coated cemented carbide grade and ISO conformity for stable medium-to-heavy steel turning; the geometry and robust chip control support consistent component quality and predictable tool life. Order the SNMM250732-TUS T9225 insert directly via Metav Werkzeuge or ask our consultants if needed. SNMM 250732 T9225 – ISO indexable turning insert for turning, 90° geometry (Tungaloy) SNMM 250732 T9225 is an ISO-standard indexable turning insert designed for external and internal turning in medium-to-heavy steel machining, offering robust chip control and compatibility with standard ISO holders. CVD-coated carbide grade T9225 Designed for medium–heavy steel turning Square ISO plate, 90° geometry, 3.2 mm radius Cylindrical-hole fastening for secure clamping Stable cutting performance for demanding steel operations The combination of a CVD-coated surface and T9225 cemented carbide core delivers enhanced wear resistance while retaining toughness where intermittent engagement or variable cutting conditions occur. This configuration extends the insert life under tougher workloads and reduces the frequency of index changes, which contributes directly to higher process efficiency. The description of the grade positions it as a robust universal option for mid-to-heavy turning of steel, making it suitable for applications where a balance of wear resistance and fracture toughness is required. Consistent geometry that reduces setup time and vibration A square, 90° plate form with a 3.2 mm corner radius and a cylindrical hole for fastening ensures mechanical stability and repeatable seating in compatible holders. The ISO-based designation and precise dimensions simplify tool selection and replacement across standard toolholders, promoting faster setup and lower downtime. Stable clamping and correct relief geometry contribute to improved surface finish and reduced tool chatter, so machines maintain consistent part quality during longer production runs. Controlled chip formation and recommended application range The TUS chipbreaker combined with the grade is tailored to control chips in external and internal turning of steel; the chipformer selection should match the workpiece material, cutting strategy and machine stability. The insert is part of an ISO turning system that comprises the indexable plate, a matching external holder or boring bar, a shim/clamp set and fastening screw(s). For best results, match the plate grade and chipbreaker to the workpiece and machining conditions to achieve predictable productivity and repeatable results. For reliable, productive turning choose the Tungaloy T9225 grade; contact Metav Werkzeuge for application advice at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Manufacturer article number: 6781287 Our SKU: 6781287-Tungaloy Manufacturer SKU: TUN6781287 WPL designation: SNMM250732-TUS Numbers / Core technical data Corner radius: 3.2 mm Plate size: 25 mm Plate thickness: 7.94 mm Relief angle: 0° Insert angle: 90° Designs / Special features Grade: T9225 (CVD-coated cemented carbide) Chipbreaker: TUS Hole style: cylindrical hole Plate shape: square System: ISO turning insert series FAQ What materials is this insert best suited for? The SNMM250732-TUS T9225 insert is designed primarily for medium-to-heavy steel machining; the T9225 grade delivers the toughness and wear resistance required for variable engagement and slightly interrupted cuts. How does the TUS chipbreaker affect machining? The TUS chipbreaker promotes controlled chip formation in turning operations, improving evacuation and reducing the risk of entanglement; combined with the T9225 grade, it supports stable cutting in demanding steel applications. Which holder features determine compatibility with this insert? Compatibility is determined by form, relief angle, tolerance class, fastening style, size and thickness; the square ISO form and cylindrical-hole fastening must match the chosen external holder or boring bar. Is the insert suitable for internal and external turning? Yes, the ISO plate and chipbreaker design make this insert suitable for both external and internal turning operations when paired with an appropriate holder and cutting parameters. What components are required to use the insert in a machining setup? The insert forms part of an ISO turning system and requires a matching external holder or boring bar, a shim or clamp set and the correct fastening screw(s) to ensure secure seating and repeatable performance. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMM 250924 T9215 Wendeplatten - Tungaloy
SNMM250924 T9215 combines CVD-coated carbide durability with a geometrically stable 90° square form and 2.4 mm corner radius for reliable medium-steel turning; compatibility with ISO toolholders ensures fast, repeatable changeovers — order directly via Metav Werkzeuge or request advice from our consultants if uncertainties remain. SNMM250924 T9215 ISO indexable turning insert — CVD-coated carbide, 90° square form (Tungaloy) A SNMM250924 T9215 indexable insert designed for external and internal turning, offering a robust CVD-coated carbide grade for productive machining of medium steel. CVD-coated carbide for high wear resistance Square 90° form with 2.4 mm corner radius ISO compatibility for quick insert changes One-sided chipbreaker for controlled chips Consistent productivity from a CVD-coated carbide grade The T9215 grade combines a CVD-coated carbide substrate with a balanced microstructure to deliver high wear resistance and good fracture toughness. This makes the insert particularly suited to medium steel where a mix of abrasion and intermittent or slightly interrupted cuts may occur. The CVD coating reduces flank and crater wear, extending service life and maintaining cutting-edge stability; as a result, process windows widen and machining cycles run more predictably. In practical terms, shops gain longer tool life per edge and fewer unscheduled indexings, which supports higher overall productivity and lower tooling cost per component. Predictable fit and rapid tool change thanks to ISO conformity Manufactured to an ISO turning-insert specification, the plate’s compatibility is defined by form, clearance angle, tolerance class, fastening, size and thickness. The square plate geometry with a 90° included angle and corner radius 2.4 mm provides a robust cutting edge for external shoulders and general turning. Key dimensions such as 25 mm plate size and 9.52 mm thickness, together with the cylindrical hole, ensure secure clamping in a wide range of standard holders and boring bars. The standardised interface reduces set-up time, simplifies inventory and ensures repeatable seating and run-out control across tool stations. Application-focused geometry for reliable chip control The insert is intended for external and internal turning applications and features a one-sided chipbreaker that helps form chips consistently when machining medium steel. The geometry supports continuous and lightly interrupted cuts, allowing steady cutting forces and stable surface finishes. Because the insert is carbide-based with a protective CVD layer, it resists thermal softening during high-material-removal-rate passes, enabling operators to choose more aggressive feeds where process stability permits, without sacrificing edge life or surface quality. System benefits and economical tooling strategy As part of an ISO insert system, the component is used together with a suitable external holder or boring bar, a support shim or clamp set and replacement screws. This modular approach permits quick edge changes and reduces downtime: instead of regrinding whole tools, worn edges are indexed or replaced, shortening maintenance intervals. The material and geometry choice leads to a favourable cost-in-use balance for serial and batch production, with fewer interruptions and consistent component tolerances. Where higher reproducibility is required, this insert’s repeatable performance supports quality control and predictable cycle times. Practical selection tips and compatibility notes Select the T9215 grade when the primary workpiece material is medium steel and the process demands a compromise between wear resistance and fracture safety. Confirm holder compatibility by matching the insert form, the specified clearance angle 0°, tolerance class and thickness. The presence of a cylindrical hole must be compatible with the clamping system of the chosen holder. For operations with heavier interruptions or very abrasive materials, consider a different grade or adapted insert geometry to avoid premature edge chipping. Contact Metav Werkzeuge for tailored recommendations on SNMM250924 T9215 inserts and assistance matching holders and parameters; technical consultation is available by phone or email through Metav Werkzeuge. Technical data Manufacturer item no.: 6773873 Manufacturer SKU: TUN6773873 SKU: 6773873-Tungaloy Model series: ISO turning inserts Facts Plate designation: SNMM250924 Plate size: 25 mm Plate thickness: 9.52 mm Corner radius: 2.4 mm Included angle: 90° Clearance angle: 0° Hole: with cylindrical hole Special features Grade/coating: T9215, CVD-coated carbide Material: carbide Application: turning (external and internal) Chipbreaker: one-sided Plate form: square FAQ What is the SNMM250924 T9215 best used for? The SNMM250924 T9215 insert is designed primarily for turning operations on medium steel, suitable for continuous and light interrupted cuts where a balance of wear resistance and toughness is required. How does the T9215 CVD coating improve performance? The CVD-coated T9215 grade provides enhanced wear resistance and thermal stability, which in turn extends edge life and maintains dimensional consistency during longer machining runs with the SNMM250924 insert. Which holders are compatible with this insert? Compatibility depends on matching the insert form, clearance angle, tolerance class, fastening method, size (25 mm) and thickness (9.52 mm); the SNMM250924 uses a cylindrical-hole clamping interface common to many ISO holders. Is the SNMM250924 suitable for internal turning? Yes, the geometry and 90° square form allow the SNMM250924 T9215 to be used for both external and internal turning when mounted in appropriate boring bars or holder systems. What chip control can be expected with this insert? The one-sided chipbreaker on the SNMM250924 supports consistent chip formation when machining medium steel, aiding evacuation and surface finish under recommended cutting conditions. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMM 250924 T9215 Wendeplatten - Tungaloy
High wear resistance and a robust cutting edge make the SNMM250924 T9215 the go-to choice for productive medium-steel turning; the square 25 mm format with a 2.4 mm corner radius and CVD-coated carbide grade ensures consistent performance in continuous to lightly interrupted cuts. Order the SNMM250924 T9215 directly via Metav Werkzeuge or contact our consultants for an application check. SNMM250924 T9215 SNMM indexable turning insert — for turning applications, Tungaloy The SNMM250924 T9215 is a square ISO indexable turning insert designed for external and internal turning, optimised for medium steel machining and high productivity operations CVD-coated carbide grade T9215 Square insert 25 mm with 9.52 mm thickness Corner radius 2.4 mm for robust turning Single-sided chipbreaker for steel machining Productive cutting with CVD-coated carbide for medium steel The CVD-coated carbide in grade T9215 combines wear resistance with breakage security, which translates into longer tool life and fewer interruptions on the shop floor. For machining medium steel, this coating resists abrasive wear and preserves the cutting edge under sustained loads; the result is higher productivity and reduced tooling costs per component. The material properties make the insert particularly suitable for continuous and slightly interrupted cuts without sacrificing stability. Stable geometry for repeatable, reliable results The square format (25 mm) with a 2.4 mm corner radius and a 90° main cutting angle provides a predictable contact geometry that supports uniform chip formation and even wear distribution. The 0° clearance angle and the central cylindrical hole ensure secure clamping and repeatable positioning in ISO-compatible holders, reducing set-up time and minimizing runout-related issues. These geometric features contribute directly to consistent surface quality and dimensional accuracy. ISO compatibility and straightforward tool integration Produced to ISO standards for indexable turning inserts, the plate integrates into standard external holders and boring bars when form, clearance, tolerance class, attachment method, size and thickness match. The ISO conformity simplifies tool selection and inventory management across mixed-machine environments, while the central hole and standard dimensions allow quick replacement during production changes. This ease of integration reduces downtime and simplifies process planning. Effective chip control and surface quality with the right chipbreaker The single-sided chipbreaker geometry is optimised for steel machining and supports controlled chip evacuation during turning operations. Proper chip control reduces risk of chip re-cutting and tool nose damage, which in turn helps maintain a stable cutting edge and consistent surface finish. For interrupted cuts or different feed ranges, pairing the insert with an appropriate holder and choosing the matching chipbreaker style ensures efficient machining and safer swarf handling. For tailored application advice or to confirm holder compatibility, contact Metav Werkzeuge — email info@metav-werkzeuge.com or call +49 2822 7131930 and request support for the SNMM250924 T9215 insert Technical data Manufacturer article number: 6773855 Manufacturer SKU: TUN6773855 Dealer SKU: 6773855-Tungaloy Model series: ISO-Drehwendeschneidplatten Material: Carbide Facts Insert size: 25 mm Thickness: 9.52 mm Corner radius: 2.4 mm Clearance angle: 0° Main cutting angle: 90° ISO code: 250924 Special features Grade/coating: T9215 (CVD-coated) Hole: with cylindrical hole Plate form: square Chipbreaker: single-sided Intended application: Turning Typical use: External and internal turning, medium-steel machining FAQ What material is the SNMM250924 T9215 intended for? The SNMM250924 T9215 is specified primarily for medium steel machining, where the CVD-coated carbide grade T9215 balances wear resistance and toughness. Is the insert compatible with standard ISO external holders? Yes. The SNMM250924 T9215 is an ISO-format insert; compatibility depends on matching form, clearance, tolerance class, attachment and size to the holder. What are the key geometric dimensions to check when replacing an insert? Verify the insert size (25 mm), thickness (9.52 mm), corner radius (2.4 mm), clearance angle (0°) and the central hole style to ensure proper fit and clamping. How does the single-sided chipbreaker affect machining? The single-sided chipbreaker promotes controlled chip formation for steel turning, improving chip evacuation and supporting a consistent surface finish with reduced risk of chip re-cutting. Can the SNMM250924 T9215 handle interrupted cuts? The grade and geometry are suitable for continuous to lightly interrupted cuts; for heavy interruptions, assess the application stability and select the appropriate chipbreaker and clamping arrangement. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMM 250924 T9215 Wendeplatten - Tungaloy
Take advantage of reliable wear resistance and proven fracture toughness in one insert: the CVD‑coated T9215 grade plus the ISO square geometry deliver consistent productivity for medium‑steel turning; compatibility is ensured by standardised form, clearance angle, size and thickness. Order directly via Metav Werkzeuge or request application advice from our consultants. SNMM250924 T9215 Tungaloy turning insert — ISO square, 90° geometry, CVD-coated carbide The SNMM250924 T9215 is an ISO‑standard square turning insert designed for productive external and internal turning of medium steels, combining a robust CVD‑coated carbide grade with a 90° geometry for versatile machining. CVD-coated carbide grade T9215 ISO SNMM 250924 square geometry 90° insert with 2.4 mm corner radius Single-sided chipbreaker, cylindrical hole Consistent productivity for medium‑steel turning The combination of a CVD‑coated carbide substrate and the T9215 grade targets high productivity in medium‑steel applications. The coating increases resistance to abrasive wear while the base carbide maintains edge stability under load. As a consequence, machining cycles benefit from longer tool life and fewer insert changes, supporting steady production throughput. The 90° geometry is particularly effective when balancing cutting force distribution and achievable surface finish. High wear resistance with fracture toughness for reliable results The chemical vapour deposition on the carbide delivers a hard, wear‑resistant surface while preserving core toughness. This balance reduces the risk of brittle fracture under interrupted cuts and contributes to steady flank wear behaviour during continuous operations. Designed for continuous to slightly interrupted cuts, the grade provides a predictable flank wear progression that enables process engineers to plan tool change intervals and maintain component tolerances with confidence. Standardised geometry and secure clamping for easy system integration As an ISO insert, the ISO SNMM250924 designation clarifies form and dimensions: square plate with a 90° approach angle, 2.4 mm corner radius and a plate thickness of 9.52 mm, with a 25 mm inscribed circle. Compatibility with a toolholder depends on matching shape, clearance angle, tolerance class, fastening method, size and thickness. The insert features a cylindrical hole for positive positioning; the system typically comprises the insert, a matching external or boring holder, a locating pad/clamp set and replacement screws for straightforward assembly. Application guidance to match process demands This insert is intended primarily for turning of medium steels and performs well when the correct chipbreaker and grade are selected for the workpiece, cut depth and machine stability. The single‑sided chipbreaker supports controlled chip formation in conventional turning operations, aiding evacuation and surface quality. For optimal outcomes, pair the insert with a holder appropriate to the intended operation and ensure machine rigidity and fixture stability to fully exploit the grade's wear resistance and fracture protection. Contact Metav Werkzeuge for tailored application recommendations and availability of the SNMM250924 T9215 insert; technical consultants can advise on the ideal holder, chipbreaker and clamping set to meet specific machining requirements — eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical Data Article number: 6774098 Manufacturer SKU: TUN6774098 Seller SKU: 6774098-Tungaloy Label: SNMM250924 T9215 Tungaloy insert Material: Carbide Grade/coating: T9215 (CVD‑coated carbide) Model series: ISO turning inserts Facts Plate thickness: 9.52 mm Inscribed circle / size: 25 mm Corner radius: 2.4 mm Approach angle: 90° Plate form: square Hole: with cylindrical hole Special features Single‑sided chipbreaker Designed for external and internal turning Suited to continuous to slightly interrupted cuts Compatibility depends on form, clearance angle, tolerance class, fastening, size and thickness System components: holder, locating pad/clamp set, replacement screws FAQ What materials is this insert best suited for? The Tungaloy SNMM250924 T9215 insert is formulated for medium‑steel machining; the T9215 CVD‑coated carbide provides wear resistance and toughness suitable for productive steel turning. How does the ISO designation affect holder selection? The ISO SNMM250924 code indicates a square, 90° insert with specific size and thickness; matching a holder requires checking form, clearance angle, tolerance class, fastening and thickness to ensure secure clamping of the SNMM250924. What is the advantage of the 2.4 mm corner radius? A 2.4 mm corner radius offers a balance between strength and achievable surface finish, allowing heavier cuts than fine radii while still delivering acceptable component accuracy in many turning operations. Is the insert tolerant of interrupted cuts? The T9215 grade is designed to withstand continuous to slightly interrupted cuts; for heavily interrupted conditions, a more fracture‑resistant geometry or specific insert grade should be considered. Does the insert require a special chipbreaker? The single‑sided chipbreaker integrated on this insert supports controlled chip formation for typical turning tasks; selecting an alternative chipbreaker depends on the specific workpiece material and machining strategy. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
SNMM 250924 T9225 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated cemented carbide grade T9225, robust square geometry with a 2.4 mm corner radius, and ISO conformity for consistent turning performance — order the SNMM250924 T9225 insert directly via Metav Werkzeuge or ask our consultants if needed SNMM 250924 T9225 SNMM turning insert for Drehen — Tungaloy SNMM250924 T9225 is an ISO-indexable turning insert designed for external and internal turning in medium to heavy steel machining, featuring a square 25 mm form and a robust single-sided chipbreaker CVD-coated cemented carbide T9225 Square 25 mm insert with 90° geometry Single-sided chipbreaker for variable cuts Cylindrical hole, thickness 9.52 mm Reliable cutting performance for medium to heavy steel turning The insert is manufactured in a CVD-coated cemented carbide grade (T9225) that balances toughness and wear resistance for interrupted and variable cutting conditions. The coating improves thermal stability and wear behaviour, which leads to prolonged tool life and fewer tool changes during serial production. For workshops and production environments that require steady throughput, this universal grade reduces unexpected downtime while maintaining repeatable performance on a wide range of steels. Stable geometry and secure clamping for precise results With a square 25 mm form and a 90° included angle, the geometry prioritises rigidity and predictable cutting forces. The 2.4 mm corner radius supports load distribution and contributes to improved surface finish on external contours. The insert’s cylindrical hole and standardised dimensions ensure compatibility with holders that match the ISO designation; the correct choice of holder is determined by form, clearance angle, tolerance class, fastening method, size and thickness. Proper clamping with a suitable external holder or boring bar delivers consistent chip control and repeatable diameters. Productivity advantages and clearer process control The single-sided chipbreaker is designed for a range of cutting regimes and helps to manage chip formation when machining steels with varying machinability. Combined with the T9225 grade, it offers stable chip formation and resistance against cratering in moderate to heavy cuts, which improves cycle time through higher feed and depth-of-cut potential. These characteristics translate into measurable productivity gains and a lower cost per finished component when compared with less optimised grades. Application guidance and practical compatibility notes Intended for both external and internal turning, the insert is part of an ISO-compliant system comprising the indexable insert, the matching external holder or boring bar, a clamp or shim set and spare screws. Select the chipbreaker and grade in accordance with the workpiece material, cutting strategy and machine stability. For interrupted cuts or mixed entry/exit conditions, the toughness of the Tungaloy grade is beneficial; for fine finishing, reducing depth of cut and matching tool nose radius will yield improved surface quality. When in doubt about holder compatibility or cutting data, consult the available documentation or contact technical advisers for tailored recommendations. Contact Metav Werkzeuge for application-specific advice on the Tungaloy SNMM250924 T9225 insert or to confirm holder compatibility — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6780700 Manufacturer SKU: TUN6780700 SKU: 6780700-Tungaloy Facts Corner radius: 2.4 mm Insert size: 25 mm Thickness: 9.52 mm Included angle: 90° Relief angle: 0° Hole: with cylindrical hole Special features ISO designation: SNMM250924 Grade/sort: T9225 (CVD-coated cemented carbide) Geometry: square insert, single-sided chipbreaker Typical application: external and internal turning System components: insert, matching holder or boring bar, shim/clamp set, screws FAQ What materials is this insert best suited for? The SNMM250924 T9225 insert is optimised for medium to heavy steel machining; the CVD-coated cemented carbide grade T9225 gives a balance of toughness and wear resistance for varying steel conditions. Is the SNMM250924 compatible with standard ISO holders? Yes, the insert follows ISO indexing; compatibility depends on matching the holder by form, clearance angle, tolerance class, fastening method, size and thickness. Which chipbreaker should be chosen for interrupted cuts? For interrupted or variable cuts, the single-sided chipbreaker combined with the T9225 grade provides improved toughness and chip control for the SNMM250924 insert. How does the 2.4 mm corner radius affect finishing? A 2.4 mm corner radius favours stable cutting and improved load distribution; for finer surface finish, consider reducing depth of cut or using a smaller nose radius where feasible. What system parts are required to mount the insert? Assembly typically comprises the indexable insert, a matching external holder or boring bar, an underlay/shim or clamp set and replacement screws; ensure all components meet the relevant ISO dimensions for secure clamping. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMM 250924 T9225 Wendeplatten - Tungaloy
Take advantage of the combination of CVD‑coated carbide toughness, ISO‑standard geometry and predictable chip control for stable medium to heavy turning operations. Order the insert directly via Metav Werkzeuge or consult our technical advisors for holder compatibility and application advice. SNMM 250924 T9225 square indexable insert — turning, CVD‑coated carbide, 90° SNMM250924 T9225 is a square indexable turning insert designed for robust medium to heavy steel machining with a CVD‑coated carbide grade for enhanced toughness and edge stability ISO‑standard square insert for turning CVD‑coated carbide grade T9225 Designed for medium to heavy steel machining Single‑side chipbreaker with 2.4 mm radius Durable performance under variable turning conditions The CVD‑coated carbide grade T9225 combines toughness with reliable wear resistance, making the insert well suited to medium to heavy steel operations and light interruptions. The coating increases edge life and reduces flank wear, while the substrate provides the fracture resistance required when feed or engagement varies. As a result, production runs achieve fewer unplanned tool changes and improved process stability, which supports higher overall productivity. Accurate fit, stable clamping and predictable chip control The ISO‑standard square geometry and 90° shape ensure consistent seating and repeatable results in ISO‑compliant holders. The insert features a single‑side chipbreaker and a 2.4 mm corner radius to support controlled chip formation and surface finish during turning. A cylindrical hole with standard tolerance, together with a 9.52 mm plate thickness and clearly defined dimensions, simplifies selection of the correct holder and clamping set. Compatibility depends on form, relief angle, tolerance class, fastening method, size and thickness — matching these parameters ensures secure clamping and a reliable cutting edge. Streamlined inventory and cost‑effective tool management Using a robust universal grade like T9225 reduces the number of specialised inserts required across varying steel turning tasks. The combination of a stable cutting edge and predictable wear behaviour supports longer tool life and fewer changeovers, which lowers handling time and inventory complexity. The complete system comprises the indexable insert, a matching outside holder or boring bar, a shim/clamping kit and spare screws — an integrated approach that simplifies procurement and keeps machine uptime high. For reliable heavy‑duty turning with Tungaloy quality, specify the SNMM250924 T9225 insert through Metav Werkzeuge and request compatibility checks or application recommendations at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Manufacturer article number: 6781300 SKU: 6781300-Tungaloy Manufacturer SKU: TUN6781300 Model series: ISO-Drehwendeschneidplatten Designation: SNMM250924 Specifications Corner radius: 2.4 mm Relief angle: 0° Shape angle: 90° Plate thickness: 9.52 mm Plate size: 25 mm Features & application Coating: T9225 (CVD coating) Substrate: carbide Chipbreaker: single‑sided Hole: cylindrical Plate form: square Application: turning Typical use: medium to heavy steel machining FAQ Which materials is this insert designed for? The SNMM250924 T9225 insert is optimised for steel machining, particularly medium to heavy steel; the T9225 grade offers toughness for variable engagement and slightly interrupted cuts. How does the chipbreaker affect surface finish? The single‑side chipbreaker on this insert promotes controlled chip formation, which helps maintain a consistent surface finish and reduces the risk of built‑up edge during turning. What must be checked for holder compatibility? Compatibility is determined by insert form, relief angle, tolerance class, fastening method, size and plate thickness; verifying these parameters against the chosen holder ensures correct seating and reliable clamping for the SNMM250924 insert. Can the insert be used for interrupted cuts? Yes — the CVD‑coated carbide substrate and the robust T9225 grade provide the toughness required for light to moderate interruption, improving resistance to fracture under variable cutting conditions. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMM 250924 T9225 Wendeplatten - Tungaloy
Dank der robusten CVD-beschichtung T9225 und der stabilen Hartmetall‑Ausführung bietet diese ISO‑genormte Wendeschneidplatte präzise Zerspanung bei mittleren bis schweren Stahlbearbeitungen; die quadratische 90°‑Geometrie mit 2.4 mm Eckenradius sorgt für zuverlässige Spanbildung und hohe Standzeit. Direkt über Metav Werkzeuge bestellen oder bei Bedarf die technische Beratung anfragen. SNMM 250924 T9225 Turning Insert (90° square, 2.4 mm radius) — Tungaloy The SNMM250924 T9225 is an ISO‑standard square turning insert designed for medium to heavy steel turning applications with a universal, robust CVD‑coated grade. CVD-coated carbide for robust wear resistance 90° square geometry for versatile turning 2.4 mm corner radius for stable chip formation Single-sided chipbreaker for interrupted cuts Reliable performance for medium to heavy turning The insert is manufactured in a CVD-coated carbide grade (T9225) developed for demanding steel operations where varying engagement conditions or slightly interrupted cuts require increased toughness. This configuration delivers longer tool life under fluctuating loads and contributes to more consistent cycle times in production. By choosing a universal grade, machining setups benefit from simplified tooling inventories and fewer changeovers, improving overall process efficiency. Precision geometry for consistent surface quality The square plate geometry with a 90° main cutting angle and 2.4 mm corner radius delivers a controlled cutting edge for repeatable results. The 9.52 mm thickness and 25 mm size provide rigidity that reduces chatter and improves surface finish in external and internal turning. Compatibility with holders is determined by form, relief angle (0°), tolerance class, fastening method, size and thickness, enabling integration into standard ISO tool systems while maintaining predictable cutting behaviour. Designed for interrupted cuts and workshop reliability Equipped with a single-sided chipbreaker and a cylindrical hole for secure clamping, the insert handles interrupted cuts and unstable chip conditions with reduced edge chipping. This leads to fewer unplanned tool changes and more productive uptime on the shop floor. The indexable format allows multiple edges to be used before replacement, supporting a cost‑effective machining cycle and steady output in batch or job‑shop environments. For availability and application advice on Tungaloy turning inserts, contact Metav Werkzeuge for technical guidance and ordering support via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 6781334 SKU: 6781334-Tungaloy Manufacturer SKU: TUN6781334 Model series: ISO-Drehwendeschneidplatten Material: carbide Core technical data Size: 25 mm Thickness: 9.52 mm Corner radius: 2.4 mm Relief angle: 0° Geometry angle: 90° Special features ISO designation SNMM250924 Grade: T9225 (CVD-coated) Single-sided chipbreaker Cylindrical hole for clamping Square plate form Suitable for external and internal turning FAQ What materials is this insert suitable for? The Tungaloy SNMM250924 T9225 insert is optimised for medium to heavy steel machining and performs well where toughness is required. Can this insert be used for interrupted cuts? Yes, the single-sided chipbreaker and robust T9225 carbide grade make the insert suitable for interrupted cuts and variable engagement. How does the 2.4 mm corner radius affect machining? A 2.4 mm radius increases edge strength and promotes stable chip formation, which helps to reduce edge wear and improves surface finish in roughing and semi-finishing passes. Which holders are compatible with this insert? Compatibility depends on the holder’s form, relief angle (0°), tolerance class, fastening method, size and thickness; the insert is ISO‑standard and fits matching ISO holders designed for SNMM geometry. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMM 250924 T9235 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide toughness, a 2.4 mm corner radius and ISO compatibility for reliable turning performance under unstable or interrupted cutting conditions. Order the SNMM250924 T9235 insert directly via Metav Werkzeuge or ask our consultants if needed. SNMM250924 T9235 SNMM Turning insert by Tungaloy The SNMM250924 T9235 is an ISO-standard square indexable insert for turning operations, engineered for external and internal turning where interrupted cuts and unstable setups demand a tough cutting grade. CVD-coated carbide grade T9235 Square ISO insert with 90° cutting angle 2.4 mm corner radius for stable engagement Cylindrical hole for standard clamping compatibility Consistent performance with a tough CVD coating The CVD-coated carbide composition of this ISO insert is designed to deliver robust wear resistance combined with the toughness required for interrupted cuts. The T9235 grade is formulated for lower cutting speeds and situations with reduced stability; this results in fewer edge failures and more predictable tool life. In practice, the coating and substrate work together to maintain a stable cutting edge under shock loads, reducing unexpected downtime and keeping production running smoothly. Geometry that stabilises the cut and protects the edge Geometry determines repeatability: the 90° cutting angle, square form and corner radius 2.4 mm provide a broad support zone at the tool tip, which reduces vibration and improves engagement in roughing passes. The 9.52 mm thickness and cylindrical hole ensure reliable clamping in ISO-compatible holders; this robust seat reduces micro-movements at the cutting edge and helps achieve consistent dimensional results with lower rework rates. Seamless integration into ISO tool systems Designed as part of an ISO insert system, the plate integrates with common external holders, shims and screw kits. The ISO-standard designation simplifies procurement and set-up: matching by form, clearance angle, tolerance class, fastening and thickness ensures a correct fit first time. Integration benefits include reduced set-up time, easier inventory management and predictable machining behaviour across different machines and operators. Application guidance for material and cutting style This insert is optimised for machining steel in unstable or interrupted conditions and for operations where a tougher grade at moderate speeds is preferable to a brittle, high-speed grade. The single-sided chipbreaker is suitable for turning tasks that require controlled chip formation; select feed and depth to match the grade and workpiece. For external and internal turning, choose a holder that matches the insert form and ensure clamping aligns with the ISO tolerance class to preserve insert life and surface finish. For reliable turning under challenging conditions, order the SNMM250924 T9235 indexable insert from Metav Werkzeuge or contact our technical team at Metav Werkzeuge for tailored advice via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6786059 Manufacturer SKU: TUN6786059 SKU: 6786059-Tungaloy Model series: ISO turning indexable inserts Designation: SNMM250924 Facts Inscribed circle size: 25 mm Thickness: 9.52 mm Corner radius: 2.4 mm Cutting angle: 90° Hole: with hole Hole style: cylindrical Special features Material: carbide Coating / grade: CVD-coated, T9235 Plate form: square Chipbreaker: single-sided Suitable application: external and internal turning Optimised for steel, interrupted cuts and unstable conditions ISO-compatible for standard holders and clamping systems FAQ What is the SNMM250924 best used for? The SNMM250924 T9235 indexable turning insert is intended for external and internal turning where interrupted cuts or unstable setups require a tougher CVD-coated carbide grade. Which materials are suitable for this insert? This T9235-grade insert is optimised for machining steel and performs well at lower cutting speeds and in interrupted cutting conditions; choose cutting data accordingly. What are the key dimensions and clamping requirements? The insert has an inscribed circle of 25 mm, a thickness of 9.52 mm, a corner radius of 2.4 mm and a 90° cutting angle; it features a cylindrical hole and requires an ISO-compatible holder and correct tolerance class for secure clamping. How does the T9235 grade affect tool life and chip control? The CVD-coated T9235 grade offers increased toughness for shock resistance, promoting stable chip formation and improved edge life in harsher turning scenarios; this leads to more consistent machining results and reduced scrap. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMM 250924 T9235 Wendeplatten - Tungaloy
Combining a CVD-coated carbide grade with a 2.4 mm corner radius delivers robust edge stability and longer tool life in interrupted or unstable turning operations; benefit from ISO compatibility and straightforward integration into existing holders. Order the insert directly via Metav Werkzeuge or consult our technical team for application-specific guidance. SNMM 250924 T9235 Tungaloy turning insert — CVD-coated carbide, 2.4 mm radius A SNMM250924 T9235 indexable turning insert designed for external and internal turning where interrupted cuts and unstable conditions demand a tough grade and stable edge performance. CVD-coated carbide grade T9235 2.4 mm corner radius for edge strength Square insert, 90° for robust turning One-sided chipbreaker for controlled chips Durable cutting performance in unstable turning The CVD-coated carbide grade T9235 is formulated as a tough compound specifically for machining steel at lower cutting speeds and under unstable or interrupted conditions. Because the grade is designed for toughness rather than maximum hardness, the result is improved resistance to chipping and fewer unplanned tool changes when encountering variable chip loads. This focus on durability supports a lower total cost of ownership through longer insert life and fewer stoppages, making it well suited for roughing operations or where component geometry causes intermittent engagement. Reliable geometry for process stability and surface quality The 2.4 mm corner radius and square 90° shape concentrate edge strength where it is most needed, reducing localised stress and preserving dimensional stability during aggressive cuts. The one-sided chipbreaker helps to control swarf formation and directs chips away from the cutting zone, which enhances surface finish and reduces the likelihood of recutting. Together, these geometric features aid in maintaining consistent results across workpieces and shifts, delivering reproducible quality for series production and small-batch turning alike. Simple integration into ISO tool systems Compatibility is determined by form, relief angle (0°), tolerance class, fastening method, size (25 mm) and thickness (9.52 mm). The insert has a cylindrical hole for positive clamping and is intended to be used with the appropriate external holder or boring bar, plus a matching shim/clamping set and replacement screws. Specifying the correct holder geometry and clamping hardware ensures the insert sits true and transmits cutting forces effectively, reducing vibration and maximising tool life. Application-oriented choice for steel machining This insert is optimised for turning steel in applications where interrupted cuts, lower cutting speeds or less rigid set-ups are present. Selecting the SNMM250924 with the T9235 grade provides a pragmatic balance between wear resistance and edge toughness — beneficial when stability cannot be guaranteed or when tool life must be prioritised over maximum metal removal rate. For finishing passes on stable setups, consider swapping to a finer, wear-optimised grade; for the roughing stage, this insert maintains integrity under shock loads. Practical benefits and workshop workflow Using ISO-standard indexable inserts such as this one simplifies inventory and reduces changeover complexity: identical geometry inserts can be rotated to renew cutting edges, and the insert family works with commonly available holders. The systemic approach — insert + holder + shim/clamping set + spare screws — reduces downtime and supports consistent setups across machines. For unfamiliar workpieces or borderline conditions, trial cuts with conservative feeds and speeds will quickly validate the insert’s performance without risking part quality. Contact Metav Werkzeuge for tailored application advice on Tungaloy CVD inserts and to discuss suitable holders and clamping solutions for the SNMM250924 T9235 — assistance and bespoke recommendations are available via Metav Werkzeuge. Technical data Article number: 6786068 Manufacturer SKU: TUN6786068 Brand: Tungaloy Model series: ISO-Drehwendeschneidplatten Designation: SNMM250924 Grade: T9235 Shape: square, 90° Key dimensions Size: 25 mm Thickness: 9.52 mm Corner radius: 2.4 mm Relief angle: 0° Hole: cylindrical, with hole Applications & features Material: carbide Coating: CVD Chipbreaker: one-sided Suitable for: external and internal turning Use case: steel; low cutting speeds; unstable conditions; interrupted cuts System: ISO insert; external holder or boring bar; shim/clamping set; replacement screws FAQ What materials is this insert suitable for? The SNMM250924 T9235 indexable insert is optimised for machining steel; the T9235 CVD-coated carbide grade favours toughness for interrupted and unstable cutting conditions. How does the 2.4 mm corner radius affect machining? A 2.4 mm corner radius increases edge strength and reduces the risk of chipping under shock loads; the geometry of this insert supports robust turning and contributes to stable dimensional results. Which holder and clamping parts are required for correct use? The insert must be mounted in a compatible ISO external holder or boring bar with the correct shim/clamping set and replacement screws; compatibility depends on form, relief angle (0°), size and thickness. Can this insert be used for internal turning? Yes, the SNMM250924 Tungaloy turning insert is suitable for both external and internal turning provided a properly matched boring bar or holder is used. What is the function of the one-sided chipbreaker? The one-sided chipbreaker controls chip shape and evacuation on the active cutting edge, improving surface finish and reducing the likelihood of recutting and chip interference during turning. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMM 250932 T9215 Tungaloy Wendeplatten - Tungaloy
Take advantage of the combination of high wear resistance, robust fracture toughness and standardised ISO compatibility to sustain productive turning operations. The CVD-coated carbide grade T9215 delivers reliable tool life and repeatable performance for continuous to lightly interrupted cuts; order the insert directly via Metav Werkzeuge or consult our advisors for application support. SNMM 250932 T9215 Square ISO turning insert for turning — Tungaloy SNMM250932-TUS T9215 is an ISO-format square insert engineered for external and internal turning in medium Stahl; designed to fit ISO-compatible holders with a cylindrical hole fastening and to provide consistent cutting performance in production environments. CVD-coated carbide grade T9215 Square 25 mm insert with 3.2 mm corner radius 0° clearance angle, 9.52 mm plate thickness Cylindrical hole fastening, ISO 250932 compatibility Consistent tool life and high productivity for medium Stahl machining The T9215 grade combines a CVD-coated carbide substrate with a coating system optimised for medium Stahl, offering a balance between wear resistance and fracture toughness. This balance reduces unplanned tool changes and maintains consistent cutting-edge integrity under continuous and light interrupted cut conditions. As a result, cycle times stabilise and component tolerances remain predictable, which supports a smoother production flow and reduced scrap rates. Fast integration into ISO toolholders for minimal setup time Designed to ISO dimensions, the square 25 mm format and cylindrical hole fastening enable simple, precise mounting in standard toolholders. The 3.2 mm corner radius helps to distribute cutting forces and improves surface finish on turned parts, while the 0° clearance angle promotes stable engagement for facing and longitudinal turning. These geometric features translate directly into shorter setup times and lower inventory complexity for workshops using ISO indexing systems. Secure cutting performance and shop-floor reliability With a plate thickness of 9.52 mm, the insert offers a solid seating and resistance to mechanical stress during higher-feed operations. The chipbreaker TUS is matched to the grade to ensure reliable chip control for typical turning tasks, reducing the need for post-process handling. The combination of robust mounting, coherent chip control and the CVD coating supports repeatable performance across batches, helping to safeguard takt time and throughput on demanding production schedules. Practical guidance for selecting and using the insert Choose this insert when machining medium Stahl where a compromise between edge life and toughness is required. Pair the insert with a compatible ISO holder chosen for form, free angle and tolerance class, and select cutting parameters that favour continuous or gently interrupted cuts to exploit the T9215 strengths. For tailored recommendations on feeds, speeds and fixture selection, specialist consultation is available to ensure optimal integration into existing processes. Contact Metav Werkzeuge for availability and application advice on Tungaloy inserts; the Metav Werkzeuge team can advise on matching holders and cutting data to secure consistent shop-floor results. Technical data Article number: 6773857 Manufacturer SKU: TUN6773857 Stock SKU: 6773857-Tungaloy Designation: SNMM250932-TUS Facts ISO code: 250932 Insert size: 25 mm Corner radius: 3.2 mm Plate thickness: 9.52 mm Included angle: 90° Clearance angle: 0° Special features CVD-coated carbide grade T9215 Chipbreaker TUS Cylindrical hole fastening Square ISO-format insert Suitable for external and internal turning Recommended for continuous to light interrupted cuts Model series: ISO-Drehwendeschneidplatten Material: carbide FAQ Which holders are compatible with this insert? The SNMM250932-TUS T9215 insert fits ISO-compatible square holders that accept the ISO 250932 form and a cylindrical-hole fastening; select a holder that matches the insert form, free angle and tolerance class for safe clamping. For which materials is this grade recommended? Tungaloy's T9215 grade is intended as a first choice for medium Stahl machining, combining wear resistance with toughness for productive continuous and light interrupted cuts. How does the chipbreaker influence machining? The TUS chipbreaker on this insert improves chip control during turning operations, helping to prevent long stringing chips and supporting stable surface finish when using the recommended cutting parameters for the SNMM250932-TUS T9215 insert. What mounting features ensure secure clamping? The insert uses a cylindrical hole fastening that provides a reproducible seating and secure clamping when used with the appropriate underlay/clamp set and replacement screws in a standard ISO toolholder assembly. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMM 250932 T9225 Wendeplatten - Tungaloy
Combining CVD-coated carbide T9225 durability with a 3.2 mm corner radius and ISO compatibility delivers stable, long-life performance for medium-to-heavy turning operations; order the SNMM250932-TUS directly via Metav Werkzeuge or ask our consultants if needed. SNMM250932 T9225 — ISO turning insert, CVD-coated carbide, Tungaloy The SNMM250932-TUS T9225 is an ISO square indexable insert designed for external and internal turning, engineered for robust performance in medium-to-heavy steel machining. CVD-coated carbide for high wear resistance Robust universal grade T9225 for steels Square 25 mm insert with 3.2 mm radius 9.52 mm thickness and cylindrical locating hole Reliable cutting performance from a robust grade The CVD-coated carbide composition of this insert provides a balanced combination of hardness and toughness: the T9225 grade is formulated as a robust universal option for medium-to-heavy steel machining where slightly interrupted cuts or variable engagement demand increased resilience. The CVD coating enhances wear resistance at elevated temperatures and reduces flank wear, which in turn extends tool life and improves process economy. For operations where downtime and tool change frequency matter, this material and coating pairing delivers measurable runtime benefits without sacrificing edge stability. Secure seating and rigidity for consistent results As an ISO square insert with a 25 mm side and 9.52 mm thickness, the geometry gives substantial cross-section for clamping and rigidity in the toolholder. The cylindrical locating hole ensures positive registration in compatible holders, while the 0° clearance and 90° lead angle support versatile approach options for facing and shoulder turning. The 3.2 mm corner radius increases edge strength and smooths surface transitions, lowering the risk of chipping under interrupted cuts. Compatibility depends on form, clearance, tolerance class, fastening method, size and thickness, so pairing the insert with a correctly specified holder and shim is essential for achieving repeatable results. Improved productivity through chip control and stability The TUS chipbreaker in combination with the T9225 grade is designed for effective chip control when machining steel, reducing the likelihood of snarling or re-cutting chips. Better chip evacuation enhances surface finish and protects the cutting edge, supporting higher feed rates and longer tool life. In system terms—insert, matching outer holder or boring bar, shim and clamping set with replacement screws—the right assembly and the correct chipbreaker selection for the workpiece material deliver greater process stability and predictable cycle times. For shops aiming to increase throughput while maintaining surface quality, this insert offers a reliable, cost-efficient solution. For reliable supply of original Tungaloy SNMM inserts and application advice, contact Metav Werkzeuge via info@metav-werkzeuge.com or call +49 2822 7131930 to discuss holder compatibility and the optimal chipbreaker for the task Technical data Article number: 6781288 Manufacturer SKU: TUN6781288 SKU: 6781288-Tungaloy Model series: ISO turning indexable inserts Designation: SNMM250932-TUS Material: carbide Manufacturer: Tungaloy Core specifications Size: 25 mm Thickness: 9.52 mm Corner radius: 3.2 mm Lead/approach angle: 90° Clearance angle: 0° Features & application CVD coating Grade: T9225 Chipbreaker: TUS Square insert form Cylindrical locating hole For external and internal turning Suitable for medium-to-heavy steel machining ISO‑compliant indexable insert FAQ What materials is this insert suitable for? This insert is designed for steel machining; the T9225 grade provides robustness for medium-to-heavy steel applications and handles slightly interrupted cuts. How does the 3.2 mm corner radius affect performance? A 3.2 mm corner radius increases edge strength and improves surface transitions, reducing chipping risk and often enabling higher feeds for improved productivity. Which chipbreaker should be selected for general turning? The integrated TUS chipbreaker is specified for reliable chip control in steel turning; match chipbreaker selection to the specific feed and depth of cut for optimal results. How is compatibility with holders ensured? Compatibility is determined by insert form, clearance angle, tolerance class, fastening method, size and thickness; ensure the toolholder accepts a SNMM250932-TUS square insert with a cylindrical locating hole. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMM 310924 T9225 Wendeplatten - Tungaloy
Take advantage of a robust, CVD‑coated carbide grade that combines reliable chip control and extended tool life for medium to heavy steel turning; order directly via Metav Werkzeuge or consult our technical advisors for selection and availability. SNMM 310924 T9225 – indexable insert for turning (Tungaloy) The SNMM 310924 T9225 is an ISO‑standard indexable insert engineered for external and internal turning where stability, reliable chip formation and resistance to interrupted cuts are required. CVD-coated carbide for robust steel machining ISO‑standard SNMM shape, 90° square 2.4 mm corner radius for strength and surface finish Cylindrical hole, 9.52 mm plate thickness Consistent machining performance for medium to heavy steel The T9225 grade is a CVD-coated carbide developed as a robust universal solution for demanding steel applications. Its chemical vapour deposition coating enhances wear resistance while maintaining the substrate toughness needed when conditions vary or light interruptions occur; this results in predictable tool life and stable chip formation. By choosing a coated cemented carbide with balanced hardness and toughness, workshops achieve improved productivity and fewer unscheduled tool changes, which directly reduces cycle time and increases output reliability. Geometry engineered for strength, edge life and chip control A square 90° insert with a 2.4 mm corner radius offers a compromise between edge strength and achievable surface finish: the larger radius supports heavier cuts and longer edge life, while the square form permits four usable cutting edges per indexable insert. The integrated chipbreaker 65 enhances chip control during turning operations, simplifying evacuation in both external and internal machining. The insert’s cylindrical hole and 9.52 mm thickness provide secure clamping and repeatable seating in ISO holders; compatibility is governed by form, relief angle, tolerance class, fastening method, size and thickness. Seamless system integration and operational benefits As an ISO‑standard component, the insert is intended for use in a modular system comprising the ISO turning insert, a matching external holder or boring bar, a clamping plate and screws. This system approach shortens changeover times and simplifies inventory management, because inserts can be replaced without altering the holder geometry. The net result is reduced setup complexity, more predictable machining performance and cost‑effective production for series work or job‑shop environments where material grades and cutting conditions change frequently. Contact Metav Werkzeuge for application advice and availability of the Tungaloy SNMM 310924-65 indexable insert – email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6780907 Manufacturer SKU: TUN6780907 SKU: 6780907-Tungaloy Model series: ISO turning indexable inserts Name: SNMM310924-65 T9225 Tungaloy insert Facts Shape: square, 90° Corner radius: 2.4 mm Relief angle: 0° Insert size: 31 mm Thickness: 9.52 mm Special features Grade/coating: T9225, CVD-coated carbide Chipbreaker: 65 Hole: cylindrical hole Application: external and internal turning Typical use: medium to heavy steel machining, interrupted cuts FAQ What materials is this insert designed to machine? The SNMM 310924-65 Tungaloy insert is optimised for steel machining, particularly for medium to heavy cuts and applications where occasional interruptions occur; the T9225 grade provides broad workpiece coverage. How is compatibility with a toolholder determined? Compatibility depends on insert form, relief angle, tolerance class, fastening method, size and thickness; the SNMM form and 9.52 mm thickness require a matching ISO‑compliant holder. What are the advantages of the T9225 grade? T9225 is a robust CVD‑coated carbide grade offering stable chip formation, good edge life and versatility for varying cutting conditions, making it suitable for productive turning of steel. How does the corner radius affect machining? A 2.4 mm corner radius increases edge strength and wear resistance, enabling heavier cuts and improved tool life while offering acceptable surface finish for many turning operations. Can the insert be used for internal boring as well as external turning? Yes; the geometry and chipbreaker are suitable for both external and internal turning when paired with an appropriate boring bar or holder that accepts the SNMM form. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMN 120408 FX105 Wendeplatten - Tungaloy
High wear resistance, a stable cutting edge and compact geometry ensure reliable milling performance and reduced tool changes; the FX105 grade and cemented carbide construction support longer runs and consistent surface quality. Order the insert directly via Metav Werkzeuge or consult our specialists for application-specific advice. SNMN120408 FX105 indexable insert — square 12 mm, 0.8 mm radius (Tungaloy) for milling A SNMN120408 FX105 square indexable insert engineered for productive face, shoulder and contour milling within Tungaloy milling systems. SNMN geometry for versatile milling FX105 grade: wear-resistant carbide Square 12 mm insert with 0.8 mm radius Designed for face, shoulder and high-feed milling Consistent edge life and predictable productivity The combination of the FX105 cutting grade and a cemented carbide substrate provides a balance of wear resistance and toughness that translates into extended edge life and predictable tool-change intervals. The insert’s square format and defined 0.8 mm corner radius reduce notch formation in many interrupted cuts, which keeps component tolerances stable over longer production runs. Fewer unexpected edge failures mean less downtime and improved machine utilisation for serial and batch milling. Secure seating and system compatibility for reliable results This indexable plate is intended for use in matching Tungaloy milling bodies where seat geometry and clamping integrity are critical. The insert is supplied without a hole and relies on correct clamping hardware and backing plates for secure fixation; the specified plate thickness 4.76 mm and square form require a compatible cutter body to prevent micro-movement. Ensuring the correct tool body and clamping screw reduces vibration and promotes repeatable seating, which helps to maintain surface finish and prolong tool life. Application focus: where the grade and geometry deliver benefit Suitable for face, shoulder, groove, contour and high-feed milling, the FX105 grade supplements the geometry to give the required combination of edge stability and wear performance. In practical terms, this means more consistent finishes on common milling operations and fewer indexings compared with less wear-resistant grades. When paired with correctly matched holders and cutting parameters, the insert supports efficient chip control and steady material removal rates for a wide range of production tasks. Contact Metav Werkzeuge for application-specific recommendations and fast supply of Tungaloy SNMN120408 FX105 inserts to optimise milling performance. Technical Data Manufacturer article number: 6806970 SKU (manufacturer): TUN6806970 SKU: 6806970-Tungaloy Model series: Fräswendeschneidplatten Core specifications Insert designation: SNMN120408 Size: 12 mm Thickness: 4.76 mm Corner radius: 0.8 mm Relief angle: 0° Hole: without hole Angle: 90° Design and features Shape: square Grade: FX105 Material: Hartmetall (cemented carbide) Chipbreaker: without Intended use: milling System: for Tungaloy milling systems System components: insert, clamping screw and backing plate (as applicable) FAQ Is this insert compatible with non‑Tungaloy cutter bodies? Compatibility depends on identical seat geometry and clamping method; the SNMN120408 FX105 insert (SKU TUN6806970) will fit other bodies only if the seat, thickness and clamping arrangement match the Tungaloy system Which milling operations are ideal for this grade and geometry? The insert is designed for face, shoulder, groove, contour and high‑feed milling; the FX105 grade supports interrupted cuts and general-purpose milling tasks What advantages does the FX105 grade provide? FX105 offers a balance of wear resistance and toughness, enhancing edge stability and extending the interval between indexings on demanding milling cycles How is the insert clamped in the cutter body? This square insert is supplied without a hole and requires the correct backing plate and clamping screw in a compatible cutter body to ensure secure seating What material is the insert made from? The SNMN120408 FX105 insert is made of Hartmetall, i.e. cemented carbide, providing the hardness and thermal resistance needed for robust milling performance Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMN 120408 TH10 Wendeplatten - Tungaloy
Take advantage of the TH10 universal grade and the square 12 mm form for reliable, low-force milling operations; the sharp, uncoated cemented carbide edge supports clean surfaces in non-ferrous materials. Order the insert directly via Metav Werkzeuge or consult our specialists for application matching. SNMN 120408 TH10 SNMN Milling Insert – Tungaloy SNMN120408 TH10 SNMN is an indexable milling insert for Tungaloy milling systems, optimised for face, shoulder, slot, high-feed and contour milling when used with matching cutter bodies. Universal TH10 grade for non-ferrous materials Square 12 mm insert, 0.8 mm corner radius Uncoated cemented carbide for low cutting forces Matched to Tungaloy milling systems, 90° geometry Efficient, low-force cutting with the TH10 grade The TH10 grade is an uncoated cemented carbide formulation designed to deliver a sharp cutting edge and low cutting forces when machining non-ferrous materials. This results in cleaner surface finishes and reduced burr formation, particularly on aluminium alloys and softer non-ferrous metals. The uncoated edge is advantageous where thermal resistance of coatings is unnecessary and where minimal built-up edge is critical. In practice, operators gain predictable part quality across a range of light- to medium-duty milling tasks, with the grade emphasising process stability over extreme wear resistance. Predictable results from precise geometry and radius A square insert with a nominal 12 mm side and a 0.8 mm corner radius offers a clear balance between edge strength and surface finish. The 0.8 mm corner radius increases the contact area at the cutting edge, improving tool life under intermittent loading while still producing a fine surface on planar and shoulder faces. The insert’s 90° orientation supports straightforward toolpath planning for perpendicular face milling and robust shoulder operations. In practical terms, the geometry reduces vibration risk and helps maintain dimensional accuracy when the insert is correctly seated and clamped. System compatibility and reliable clamping The milling system is assembled from a cutter body, the indexable insert, a clamping screw and, where required, a support shim. It is essential that insert seat, geometry and clamping method are matched to the cutter family to ensure secure fixation and repeatable indexability. When integrated into a Tungaloy milling body, the insert provides consistent chip formation and stable cutting behaviour. The absence of a chipbreaker means chip control must be managed via cutting parameters and toolpath strategy, particularly for long continuous cuts or thin-walled workpieces. Application guidance and handling recommendations Typical uses include face milling, shoulder milling, slotting, high-feed and contour milling, depending on the chosen cutter family. The uncoated nature of the grade makes it suitable for aluminium, brass and many plastics, where sharp edges reduce cutting forces and improve finish. For steels or hardened materials, consider coated or tougher grades suited to higher thermal and abrasive loads. Handling notes: inserts should be inspected at index changes, clamping screws torqued to the manufacturer’s specification, and any insert with edge damage replaced to preserve cutter body integrity and part quality. For matched performance in Tungaloy milling systems, contact Metav Werkzeuge for tailored advice and ordering—Metav Werkzeuge is available at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6806969 Manufacturer SKU: TUN6806969 Supplier SKU: 6806969-Tungaloy Model series: Milling indexable inserts Facts ISO designation: 120408 Size: 12 mm Thickness: 4.76 mm Corner radius: 0.8 mm Relief angle: 0° Lead angle: 90° Special features Material: cemented carbide Grade: TH10 (uncoated) Insert shape: square Hole: without hole Chipbreaker: without Typical application: milling Compatible with Tungaloy milling systems FAQ What materials is this insert best suited for? This SNMN120408 TH10 indexable milling insert is intended primarily for non-ferrous materials such as aluminium and brass, and also performs well on many plastics due to its uncoated, sharp TH10 carbide edge. Is the insert compatible with all Tungaloy cutter bodies? The insert will function correctly when the insert seat, geometry and clamping of the cutter body match the SNMN120408 specification; ensure the chosen cutter family is designed for SNMN-style inserts. How does the 0.8 mm corner radius affect part finish and tool life? A 0.8 mm corner radius provides improved edge strength and reduced vibration, yielding better tool life under interrupted cuts while still delivering a fine surface finish on faces and shoulders. Does this insert include a chipbreaker or through-hole? The SNMN120408 TH10 insert is supplied without a chipbreaker and without a hole, so chip control should be managed with suitable cutting parameters and toolpath strategies. When should a coated grade be chosen instead of TH10? For higher temperatures, abrasive workpieces or hardened steels, a coated or tougher grade is recommended; TH10 is optimised for low-force cutting and excellent finishes on non-ferrous materials. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMN 120412 AH120 Wendeplatten - Tungaloy
Benefit from the combination of PVD-coated carbide grade AH120 and ISO compatibility to ensure stable cutting performance and reduced tool-change intervals. Order the SNMN120412 AH120 Tungaloy insert directly via Metav Werkzeuge or ask our consultants if needed. SNMN120412 AH120 Tungaloy turning insert — ISO turning insert, 90° square, 1.2 mm corner radius SNMN120412 AH120 Tungaloy turning insert is an ISO-compliant indexable insert for external and internal turning applications, offering a wear-resistant PVD-coated carbide grade for process-secure machining. PVD-coated carbide grade AH120 ISO SNMN120412 size, 90° square 1.2 mm corner radius for robust edges No-hole square insert, 4.76 mm thickness Consistent edge life and secure cutting performance The PVD coating on the carbide substrate delivers a balanced combination of wear resistance and edge integrity, which is essential for sustained turning operations. The AH120 grade is formulated for applications where a sharp cutting edge and high process security are required; this reduces the frequency of tool changes and supports longer uninterrupted runs. In practice, the result is predictable tool life and improved component consistency when machining steels and alloyed materials under stable cutting conditions. Integration with ISO tooling systems for fast setup Designed as an ISO indexable insert, compatibility with the toolholder depends on form, relief angle, tolerance class, clamping method, size and thickness. The square geometry with an included angle of 90° and a plate thickness of 4.76 mm enables straightforward interchangeability into standard external holders or boring bars. The absence of a central hole simplifies seating on holders designed for corner clamping; correct selection of holder and clamping components ensures secure fixation, accurate repeatability and minimal setup time on CNC lathes. Robust geometry for roughing and finishing balance The 1.2 mm corner radius provides strength at the cutting edge, making the insert suitable for heavier cross-sections and interrupted cuts while still permitting good surface finish when parameters are tuned. Although there is no dedicated chipbreaker, matching the insert grade and geometry to the workpiece material and cutting conditions allows a controlled chip formation and stable machining. This balance is particularly valuable when alternating between roughing passes and finishing passes on shafts, housings or turned profiles. Practical guidance and application support Selection of the appropriate chipformer and insert grade should follow the workpiece material, machining strategy and machine-tool rigidity. For external and internal turning, pair the insert with a compatible square holder and follow the manufacturer’s recommendations for speeds and feeds for steel and alloyed materials. If further technical data or cutting parameter guidance is required, Metav Werkzeuge’s technical team can provide tailored recommendations and assist with process optimisation via email or telephone: info@metav-werkzeuge.com | +49 2822 7131930. Contact Metav Werkzeuge today for advice on integrating Tungaloy inserts into the production line and to request batch availability and delivery options Technical data Article number: 6850593 Manufacturer SKU: TUN6850593 Brand: Tungaloy Model series: ISO-Drehwendeschneidplatten Facts Geometry / ISO designation: SNMN120412 Grade: AH120 (PVD-coated carbide) Corner radius: 1.2 mm Included angle: 90° Plate size: 12 mm Thickness: 4.76 mm Designs / Special features Square insert (4-sided indexable) No central hole No chipbreaker Intended application: turning (external & internal) Relief angle: 0° Compatible with ISO turning holders FAQ What materials is this insert suited for? The SNMN120412 AH120 Tungaloy insert is a PVD-coated carbide grade designed primarily for steels and alloyed materials where a sharp edge and process security are required. How does the 1.2 mm corner radius affect machining? A 1.2 mm corner radius increases edge strength for roughing and interrupted cuts while still permitting good finishes when feeds and speeds are adjusted appropriately. Is this insert compatible with standard ISO toolholders? Yes; the SNMN120412 follows ISO geometry. Compatibility depends on holder form, clamping type, tolerance class, size and thickness, so use holders specified for square SNMN inserts. Does the insert include a chipbreaker? This particular insert is supplied without a dedicated chipbreaker; chip formation must be managed by cutting parameters and the choice of holder or external chip control methods. How can cutting parameters be obtained for a specific workpiece? Metav Werkzeuge can provide application-specific recommendations; consult the technical team with details of workpiece material, desired surface finish and machine rigidity. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMN 120412 FX105 Wendeplatten - Tungaloy
Combining FX105 wear resistance with a carbide substrate and ISO interchangeability, this insert delivers steady turning performance and reduced tool-change frequency. Ideal for standardised setups where holder compatibility and edge stability are decisive. Order the SNMN120412 FX105 insert directly via Metav Werkzeuge or consult our specialists for selection support. SNMN120412 FX105 SNMN turning indexable insert by Tungaloy — Carbide, 90° square, 1.2 mm radius A SNMN120412 FX105 indexable insert engineered for precision external and internal turning in ISO-standard tool systems. ISO-compatible geometry for reliable holder fit Carbide body with FX105 wear resistance 90° square form for versatile turning 1.2 mm corner radius for robust edge strength Stable cutting performance through balanced grade design The combination of a carbide substrate and the FX105 grade provides a controlled balance between wear resistance and toughness, which reduces flank wear during continuous operations. This balance leads to steadier component tolerances and longer stretches between tool changes, improving overall throughput. The insert’s geometry supports both roughing and semi-finishing passes where a reliable edge and repeatable chip formation are required, helping to sustain cycle-time targets without sacrificing surface quality. Proven fit and simple integration into ISO tool systems Designed as part of the ISO turning indexable insert family, the square 90° form and specified dimensions ensure predictable compatibility with matching holders. Key dimensions such as the 4.76 mm plate thickness and 12 mm inscribed circle must be matched to the toolholder’s seat, clamp and tolerance class; compatibility is determined by form, relief angle, tolerance class, fastening method, size and thickness. A holder, shim/clamp set and replacement screws complete the system, enabling quick changes and consistent clamping force for repeatable results. Operational advantages for workshop productivity With a 1.2 mm corner radius and a plain edge (no dedicated chipbreaker), the insert offers a robust cutting edge suited to a wide range of turning tasks when combined with appropriate cutting parameters. The neutral 0° relief supports predictable cutting behaviour across varying materials and stability conditions, while the square form provides four indexable edges for economical use. For applications where chip control or specialised edge forms are required, pairing this geometry with tuned feeds and speeds achieves the desired surface finish and tool life. The SNMN120412 FX105 configuration is a practical choice where consistent performance and ease of inventory management matter. For precise turning tasks that demand repeatable edge stability, request availability of the Tungaloy FX105 SNMN120412 indexable insert from Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Manufacturer article number: 6806971 SKU: 6806971-Tungaloy Manufacturer SKU: TUN6806971 Model series: ISO-Drehwendeschneidplatten Material: Carbide Grade: FX105 Label: SNMN120412 FX105 Tungaloy-Wendeplatte Application: Turning Facts Inscribed circle / size: 12 mm Plate thickness: 4.76 mm Corner radius: 1.2 mm Relief (free) angle: 0° Corner angle: 90° Hole: without hole Special features Square plate form Plain edge, no chipbreaker ISO-standard indexable insert System components: matching holder, shim/clamp, replacement screws Designed for external and internal turning Tungaloy grade for balanced wear and toughness FAQ What materials is this insert intended for? The SNMN120412 FX105 Tungaloy indexable insert is designed for general turning applications and performs well across a broad material spectrum when cutting data are adapted to the workpiece. How many edges are usable before replacement? As a square 90° insert, the SNMN120412 typically offers four indexable edges; rotation and re-clamping restore a fresh cutting edge until all edges are consumed. Does the insert include a chipbreaker? This variant is supplied without a dedicated chipbreaker; the plain-edge geometry of the SNMN120412 FX105 provides flexibility for adjusting feeds and speeds to achieve the required chip form. Which holder characteristics ensure correct compatibility? Compatibility is governed by holder form, relief and tolerance class, fastening method, and the insert’s size and thickness; use holders specified for the ISO SNMN profile to guarantee proper seating and clamping. Is the grade suitable for interrupted cuts? The FX105 grade combines wear resistance and toughness, which contributes to edge stability under varying cutting conditions and can be suitable for applications with intermittent engagement when appropriate parameters are chosen. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMN 120412 T1115 Wendeplatten - Tungaloy
Take advantage of the Tungaloy T1115 grade and ISO compatibility for consistent tool life and predictable productivity; order via Metav Werkzeuge or request advice from our consultants for seamless integration into existing turning systems. SNMN120412 T1115 ISO turning insert for turning — Tungaloy SNMN120412 T1115 is an ISO‑standard indexable turning insert designed for general external and internal turning applications, offering a combination of wear resistance and edge stability for productive machining. ISO‑standard geometry for broad compatibility Tungaloy T1115 grade for wear resistance Carbide construction for stable cutting performance 1.2 mm corner radius for edge strength Engineered to maintain cutting performance under industrial conditions The insert is manufactured from carbide and specified with Tungaloy's T1115 grade, which balances wear resistance and toughness to provide dependable cutting life. This composition reduces the need for frequent index changes and supports uninterrupted production cycles. The ISO conformity of the insert ensures predictable mechanical behaviour in repetitive operations, helping to maintain component tolerances and surface quality over long runs. Seamless fit with ISO‑compliant tool systems reduces setup risk Compatibility is determined by shape, clearance angle, tolerance class, clamping and thickness; the SNMN120412 follows ISO norms so it mates with matching square holders and clamping sets. The insert’s 90° approach geometry suits general turning profiles and simplifies fixture selection. Clear, standardised dimensions allow machine shops to replace inserts without additional trial adjustments, shortening downtime and maintaining process reliability. Corner radius and geometry selected for a balance of strength and finish A 1.2 mm radius provides increased edge strength compared with finer radii, improving resistance to chipping when machining with moderate engagement and interrupted cuts. At the same time, the geometry supports acceptable surface finishes for many production parts. Specified 4.76 mm thickness enhances stability in the clamping system, while the square format delivers four usable cutting corners per insert, improving cost‑efficiency in batch production. Practical guidance for system assembly and application choices The system typically comprises an ISO insert, a compatible external holder or boring bar, an underlay/clamping set and replacement screws; the insert supplied is without a chipbreaker and without a hole, so selection of a dedicated chip control solution may be required depending on material and cutting parameters. For machining tasks, match the grade and any chipbreaker to the workpiece and the machine’s rigidity to get the best compromise between tool life and productivity. For unfamiliar set‑ups, refer to holder specifications and tolerance classes to ensure safe clamping and correct seat fit. For reliable, productive turning using Tungaloy’s T1115 grade, contact Metav Werkzeuge for application advice or to arrange procurement and integration into the current tool system. Technical Data Article number: 6863796 Manufacturer SKU: TUN6863796 SKU: 6863796-Tungaloy Model series: ISO turning inserts Facts Shape: square Size: 12 mm Thickness: 4.76 mm Corner radius: 1.2 mm Clearance angle: 0° Approach angle: 90° Special features Material: Carbide Grade: T1115 (Tungaloy) Chipbreaker: none Hole: none Intended use: Turning FAQ What materials is this insert intended for? The SNMN120412 T1115 indexable turning insert by Tungaloy is specified for turning operations; select an appropriate chipbreaker and cutting data for the intended workpiece material to achieve optimal results. How is compatibility with a toolholder ensured? Compatibility depends on form, clearance angle, tolerance class, clamping, size and thickness; matching the insert’s ISO geometry to the holder’s seat and clamping method ensures correct fit and safe operation. Does this insert include a chipbreaker or central hole? The insert is supplied without a chipbreaker and without a hole, so chip control must be provided by the chosen geometry or by the machine and process settings. What effect does the 1.2 mm corner radius have on machining? A 1.2 mm radius increases edge strength and resistance to chipping, favouring durability in interrupted or heavier cuts while still offering acceptable surface finish in typical turning tasks. Can this insert be used for internal turning as well as external turning? Yes, the ISO‑specified geometry and square format make it suitable for both external and internal turning when used with the correct boring bar or holder. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMN 120412 T3130 Wendeplatten - Tungaloy
Take advantage of the combination of ISO-standard compatibility, T3130 carbide grade and a compact 1.2 mm corner radius to achieve stable, cost-efficient turning operations; order genuine inserts via Metav Werkzeuge or consult their specialists for holder matching and process optimisation. SNMN120412 T3130 – ISO turning insert for external and internal turning, Tungaloy SNMN120412 T3130 is an ISO-standard, square indexable insert designed for general turning applications where a balanced combination of wear resistance and edge stability is required. ISO-standard turning insert T3130 grade for balanced wear and toughness 1.2 mm corner radius for stable cutting Square form, 12 mm size, 4.76 mm thick Stable cutting with a resilient carbide construction The insert is made from cemented carbide, engineered to deliver consistent performance in turning operations. The square insert form and the 1.2 mm corner radius provide mechanical rigidity at the cutting edge, reducing chatter and improving surface finish on interrupted and continuous cuts. Designed as an ISO-standard plate, it integrates into established toolholder systems when the holder matches in form, clearance and size. The primary benefit is a repeatable cutting geometry that supports reliable machining cycles and predictable tool life. Balanced T3130 grade for mixed turning tasks The T3130 designation identifies a Tungaloy cutting grade formulated to balance wear resistance and toughness, helping to preserve the cutting edge under varied cutting conditions. This combination supports longer intervals between indexings and reduces unexpected tool changes, which contributes to greater productivity. For less experienced users, the grade reduces the need for highly specialised cutting parameters while experienced operators will appreciate the grade’s tolerance to fluctuating feed and stability conditions. Compatibility and mounting explained for secure integration Compatibility with a chosen holder depends on the insert’s shape, clearance angle, tolerance class, attachment method, size and thickness. This insert features a 0° clearance angle and a plate thickness of 4.76 mm, with a standard 12 mm plate size and no hole; such details must be matched to a corresponding external holder or boring bar. Correct combination of insert geometry and holder ensures reliable clamping, thermal stability and accurate positional repeatability during external and internal turning operations. Practical benefits in day-to-day turning When used for external and internal turning, the insert supports process stability and cost-effectiveness: fewer interruptions for index changes, consistent surface quality and easier programming of cutting cycles. Where chip control is required, the selection of an appropriate chipbreaker and the T3130 grade together determine chip form and evacuation; choose the chipbreaker and grade to suit the workpiece material and machining stability. Overall, the component is a practical solution for workshops seeking a dependable, versatile indexable insert for a wide range of turning tasks. For compatibility checks, holder recommendations or to secure genuine Tungaloy SNMN120412 T3130 inserts, contact Metav Werkzeuge for precise advice and efficient supply. Technical data Article number: 6853848 SKU: 6853848-Tungaloy Manufacturer SKU: TUN6853848 Designation: SNMN120412 Series: ISO-Drehwendeschneidplatten Material: Cemented carbide Manufacturer article number: 6853848 Facts Plate size: 12 mm Thickness: 4.76 mm Corner radius: 1.2 mm Clearance angle: 0° Insert angle: 90° Special features Grade: T3130 (Tungaloy) Form: Square (quadratic) Hole: without hole Chipbreaker: without Intended use: External and internal turning Compatibility criteria: shape, clearance angle, tolerance class, attachment, size, thickness FAQ What turning operations is this insert designed for? The SNMN120412 T3130 insert from Tungaloy is intended for both external and internal turning tasks and performs well where a balance of wear resistance and edge stability is required. Which holder features must match the insert? Compatibility requires a holder that matches the insert’s form, clearance angle (0°), tolerance class, attachment method, size (12 mm) and thickness (4.76 mm) to ensure secure clamping and accurate positioning. Does the insert include a chipbreaker? This SNMN120412 T3130 insert is specified without a chipbreaker; selection of an appropriate chip control solution should be made according to the workpiece material and machining conditions. How does the T3130 grade benefit machining? The T3130 grade provides a compromise between wear resistance and toughness, offering longer edge life under variable conditions and supporting process stability across many turning applications. What is the correct way to reference this product when ordering? Please reference the designation SNMN120412 T3130 and the SKU 6853848-Tungaloy when ordering to ensure the correct Tungaloy indexable insert is supplied. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMN 120412 UX30 Wendeplatten - Tungaloy
Benefit from precise cutting with a sharp uncoated carbide grade UX30, ISO compatibility and a 1.2 mm corner radius for predictable chip control; order the SNMN 120412 UX30 turning insert directly via Metav Werkzeuge or consult our specialists for application advice. SNMN 120412 UX30 square turning insert by Tungaloy — 90° geometry, 1.2 mm radius The SNMN 120412 UX30 is an ISO‑standard, square indexable insert designed for external and internal turning, offering a sharp uncoated carbide grade that prioritises low cutting forces and reliable chip formation. ISO‑standard square insert SNMN 120412 Uncoated carbide UX30 for sharp cutting edge 90° geometry for versatile turning operations Corner radius 1.2 mm for predictable chip control High‑precision cutting with a sharp, uncoated carbide grade The combination of the UX30 uncoated carbide grade and a sharp edge geometry reduces cutting forces and supports stable chip formation, which directly benefits cycle times and surface finish in turning operations. For components where reduced cutting pressure and consistent material removal are required, this insert performs well across a range of steels and machinable alloys. The sharp cutting action also aids in achieving clean part edges with less tendency for smearing, translating into fewer secondary operations and improved process efficiency. Reliable interchangeability and quick integration into machining cells Manufactured to ISO dimensions, the insert ensures predictable fitment with matching holders and turning bars; compatibility is defined by form, 0° relief angle, tolerance class, fastening method, size and thickness. The standardised format simplifies inventory management and tool changeover, because the insert integrates easily into existing tool systems. Specifying an ISO‑standard insert reduces setup variability and helps standardise machining processes across different machines and operators, supporting reproducible results and reduced downtime. Geometry and form tuned for consistent chip control and versatility A square insert with 90° geometry and a 1.2 mm corner radius offers robust edge support for general turning tasks while delivering controlled chip behaviour. The plate thickness of 4.76 mm gives mechanical stability at higher feed rates, and the absence of an integral chipbreaker means chip control depends on selecting the correct grade and external tooling or coolant strategy for the workpiece material. For many turning applications, this creates a flexible solution that can be adapted by choosing the appropriate holder and cutting parameters to match the material and desired surface quality. For ordering, application recommendations or to discuss suitability for specific materials contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 — Metav Werkzeuge can advise on the best holder and grade combinations for the intended turning task Technical data Article number: 6806973 Manufacturer SKU: TUN6806973 SKU: 6806973-Tungaloy Facts Model series: ISO‑Drehwendeschneidplatten Application: Turning ISO designation: SNMN120412 Grade: UX30 Material: Hartmetall Special features Shape: square Size: 12 mm Thickness: 4.76 mm Corner radius: 1.2 mm Relief angle: 0° Hole: without hole Chipbreaker: without Geometry angle: 90° FAQ What applications are suitable for this insert? The SNMN 120412 UX30 turning insert by Tungaloy is intended for external and internal turning where low cutting forces and reliable chip formation are priorities. Which materials suit the UX30 grade? The UX30 uncoated carbide grade is chosen for machining operations that require a sharp cutting edge and controlled chip formation; it performs well on a wide range of commonly machined steels and alloys. How does the 1.2 mm corner radius influence results? A 1.2 mm corner radius increases edge strength and improves surface finish while offering predictable chip behaviour when paired with the correct holder and cutting parameters. Is a chipbreaker included with this insert? This particular variant is supplied without a chipbreaker; chip control is managed through holder choice, cutting parameters and coolant strategy. How does ISO standardisation benefit production planning? ISO standard dimensions, as found in this SNMN120412 insert, simplify tool management and reduce setup variation, enabling easier replacement and consistent machining results. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMN 120416 FX105 Wendeplatten - Tungaloy
Take advantage of the combination of high wear resistance, robust edge stability and simple system integration to maintain steady milling output; order the insert directly via Metav Werkzeuge or request application advice from our consultants. SNMN120416 FX105 Tungaloy indexable insert for milling — square 12 mm, 1.6 mm radius SNMN120416 FX105 Tungaloy indexable insert is designed for a wide range of milling operations and is compatible with Tungaloy milling systems when seat geometry and cutter body match. FX105 carbide for wear resistance Square form for secure insert seating 1.6 mm corner radius for edge strength 90° geometry for versatile milling Longer tool life through optimised carbide grade and toughness The SNMN120416 insert uses the FX105 carbide grade developed for milling to balance wear resistance and toughness. This composition extends edge life under intermittent and continuous cuts, which translates directly into longer tool cycles and fewer indexings. In practical terms, the cemented carbide substrate combined with the FX105 specification reduces flank wear and maintains cutting stability, making the insert a cost-effective choice where repeatable performance is required. The result is measurable process uptime and predictable component quality in both shop-floor and production environments. Secure seating and stable cutting geometry for reliable results A square form with a 90° corner offers a stable clamping interface and repeatable cutting geometry, while the 1.6 mm corner radius provides improved edge strength compared with smaller radii. This combination helps to avoid premature chipping during shoulder and face milling and supports consistent surface finish in interrupted cuts. The insert’s 4.76 mm thickness and square format ensure robust engagement with the cutter body, reducing vibration and helping to preserve tool life. Explaining the function simply: a larger corner radius spreads cutting forces over a greater area, which reduces local stress at the cutting edge and increases resistance to edge breakdown. System compatibility and application flexibility for efficient production The insert is intended for use in Tungaloy milling systems; therefore, insert seat, geometry and cutter body must be technically matched to ensure correct clamping and alignment. When correctly paired, the indexable insert is suitable for face, shoulder, slot, high-feed and contour milling depending on the chosen cutter family. The design lacks an integrated chipbreaker, which favours applications where unobstructed chip flow and straightforward regrinding strategies are preferred. Integration into a matched milling head yields consistent chip formation and simplifies process parameter optimisation, improving productivity and reducing the need for frequent troubleshooting. For application advice or to secure the SNMN120416 FX105 Tungaloy indexable insert for improved milling performance, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6806974-Tungaloy Manufacturer article number: 6806974 SKU manufacturer: TUN6806974 Model series: Fräswendeschneidplatten Material: cemented carbide Dimensions & specifications Size: 12 mm Thickness: 4.76 mm Corner radius: 1.6 mm Geometry angle: 90° Relief (free) angle: 0° Hole: without hole ISO designation: 120416 Design & special features Square plate form Carbide grade FX105 No chipbreaker For milling applications: face, shoulder, slot, high-feed, contour (depending on cutter family) Intended for Tungaloy milling system; insert seat and cutter body must match technically FAQ What materials can this insert machine effectively? The SNMN120416 FX105 Tungaloy indexable insert (SKU 6806974-Tungaloy) is specified for general milling tasks; the FX105 grade offers broad workpiece coverage with good wear resistance and edge stability suitable for a wide range of steels and alloyed materials. Is the insert compatible with non-Tungaloy cutter bodies? Compatibility requires that the insert seat, geometry and cutter body are technically matched; while the SNMN120416 FX105 is made for Tungaloy systems, it can only be used in other systems if identical seat and clamping parameters are met. How does the 1.6 mm corner radius affect machining performance? A 1.6 mm corner radius increases edge strength and reduces the likelihood of chipping during shoulder and face milling, improving tool life and contributing to a more consistent surface finish when using the SNMN120416 FX105 insert. Does this insert include a chipbreaker? The SNMN120416 FX105 Tungaloy indexable insert is supplied without a chipbreaker, which favours applications requiring unobstructed chip flow or where process control is achieved by cutter geometry and cutting parameters. What should be checked before fitting the insert into a cutter body? Ensure the seat geometry, clamping method and dimensional tolerances of the cutter body match the SNMN120416 FX105 insert; correct mechanical seating is essential for secure clamping and repeatable milling performance. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com