SNMU 1706AN T1215 Wendeplatten - Tungaloy
Take advantage of the combination of Tungaloy T1215 carbide performance, a square 17 mm form and a secure clamping arrangement with cylindrical hole and countersink for reliable milling results — order the insert directly via Metav Werkzeuge or ask our consultants for application advice. SNMU 1706AN T1215 milling indexable insert for milling operations by Tungaloy A SNMU1706AN T1215 square indexable insert designed for a broad range of milling tasks where reproducible edge stability and stable chip control are required Square 17 mm insert for 90° milling Tungaloy T1215 carbide grade for durability Double-sided chipbreaker for consistent chip control Cylindrical hole with 40°–60° countersink High-performance carbide for predictable tool life The insert is manufactured from carbide in the Tungaloy T1215 grade, a combination that balances wear resistance with edge toughness to extend in-process life. This material choice reduces the frequency of tool changes and helps maintain machining accuracy over longer cycles, which contributes directly to higher throughput and lower overall machining cost. The specification suits demanding milling tasks where cutting-edge stability prevents premature wear and ensures consistent results across batch production. Secure seating and chip management for uninterrupted machining Designed with a cylindrical hole and a double-sided countersink (40°–60°), the insert ensures secure clamping and precise positioning in compatible Tungaloy milling bodies. The double-sided chipbreaker promotes controlled chip formation, reducing the risk of chip congestion and improving surface integrity. Together, these design elements support uninterrupted cycles and reliable fixture behaviour, which is particularly valuable in automated or high-feed environments where process security is essential. Versatile application scope with clear process benefits The geometry and system design make this insert suitable for face, shoulder, slot, high-feed and contour milling depending on the assigned tool family, delivering improved surface finish and consistent dimensional control. Operators benefit from predictable cutting behaviour and shorter set-up times when the insert is paired with matching milling bodies. The square form at a 90° engagement angle is especially effective for shoulder milling and operations requiring robust corner strength. Practical integration and handling for production use With a nominal size of 17 mm and a plate thickness of 6.35 mm, the component is compact yet robust; the zero corner radius reduces interference in tight features while the standardised interface simplifies inventory management. Correct seating and matching of the insert to the cutter body are crucial: the seat, geometry and cutter body must be technically compatible to exploit the full potential of the grade and form. Spare parts handling is straightforward and replacement is fast when using the recommended clamping screw and, where applicable, a matching backing pad. For process-secure milling with Tungaloy’s T1215 grade, contact Metav Werkzeuge to identify the correct milling body for the SNMU1706AN insert or request a technical consultation via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 6747244 Manufacturer SKU: TUN6747244 METAV SKU: 6747244-Tungaloy Model series: Fräswendeschneidplatten Data Insert size: 17 mm (square) Thickness: 6.35 mm Cutting angle: 90° Corner radius: 0 mm Relief angle: 0° Countersink angle: 40°–60° Grade / designation: 1706AN / T1215 Special features Material: carbide Chip control: double-sided chipbreaker Hole style: cylindrical hole + double-sided countersink Plate form: square Application: milling System compatibility: Tungaloy milling systems FAQ Which milling operations suit this insert? The insert is suitable for face, shoulder, slot, high-feed and contour milling when used in the correct tool family; the SNMU1706AN T1215 insert delivers predictable edge stability for these operations. Is the SNMU1706AN compatible with other manufacturers' milling bodies? The SNMU1706AN is designed for Tungaloy milling systems; the seat, geometry and cutter body must match technically for safe and reliable use. How is the insert clamped in the cutter? Clamping is achieved via the cylindrical hole with a 40°–60° double-sided countersink, which accommodates the prescribed clamping screw and ensures precise locating and firm retention. What material and grade does the insert use? The insert is made from carbide in the Tungaloy T1215 grade, optimised for a balance of wear resistance and toughness in milling applications. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMU 1706AN T3225 Wendeplatten - Tungaloy
Benefit from the reliable combination of Tungaloy T3225 grade, cemented carbide construction and a square 17 mm form for stable, repeatable milling results; order the insert directly via Metav Werkzeuge or ask our consultants for application advice. SNMU 1706AN T3225 – square indexable insert for milling by Tungaloy (17 mm, 6.35 mm) The SNMU 1706AN T3225 is a square indexable insert developed for milling applications such as face, shoulder, slot, high-feed and contour milling, requiring matching insert seat, geometry and cutter body. Tungaloy T3225 grade for wear resistance Square insert 17 mm, 6.35 mm thickness Cylindrical hole with 40°–60° double countersink Double-sided chipbreaker for consistent chips Reliable wear resistance for longer tool life The combination of the T3225 grade and cemented carbide substrate provides a balance of wear resistance and toughness that translates directly into longer in‑service life and fewer tool changes. In practical terms, the engineered grade reduces flank and crater wear under typical milling loads while maintaining edge stability, which helps to keep tolerances and surface finish consistent over extended runs. This is particularly advantageous in production environments where tool changes disrupt cycle time and increase indirect costs. Secure mounting and consistent chip control A secure clamp and precise seating are essential in milling; the insert's cylindrical hole with a double‑sided countersink (40°–60°) ensures stable clamping and accurate axial positioning in compatible cutter bodies. The double-sided chipbreaker manages swarf formation for predictable chip flow, lowering the risk of recutting and improving evacuation in pocketed or deep features. The 6.35 mm thickness contributes to bending stiffness and reduces vibration, supporting higher metal removal rates with dependable process stability. Broad application scope with predictable results Designed for a wide range of milling tasks, from planing to contouring, this square insert supports both conventional and high‑feed strategies when paired with a matching tool body. The geometry yields multiple indexable cutting edges, enabling efficient corner reversal and cost-effective use of the insert's working life. In practice, using certified inserts such as this one improves throughput, reduces variability between batches and delivers more predictable tool consumption for production planning. Practical handling and system compatibility Square geometry and a 90° included angle make the insert suitable for shoulder and face milling where an orthogonal tool approach is required; the 0° relief and 0 mm corner radius should be considered when selecting cutting parameters and workpiece materials. It is important that the insert seat, geometry and milling body are technically matched to ensure correct clamping and thermal behaviour. For users less familiar with system matching, Metav Werkzeuge offers technical guidance to confirm compatibility and recommend optimal feeds and speeds for the chosen material. For tailored milling recommendations and availability of genuine Tungaloy SNMU 1706AN T3225 inserts, contact Metav Werkzeuge for application support and swift supply — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6774942-Tungaloy Manufacturer article number: 6774942 Model series: Fräswendeschneidplatten Material: Hartmetall (cemented carbide) Grade: T3225 ISO designation: 1706AN Designation: SNMU1706AN Numerical data Plate size: 17 mm Plate thickness: 6.35 mm Corner radius: 0 mm Relief angle: 0° Included angle: 90° Countersink angle range: 40°–60° Special features Square plate, indexable on multiple edges Cylindrical hole with double-sided countersink Double-sided chipbreaker For milling applications (Fräsen) Compatible with Tungaloy milling systems when seat and geometry match FAQ Which materials are suitable for this insert? The SNMU 1706AN T3225 insert by Tungaloy is formulated for versatile milling tasks; the cemented carbide grade offers a broad coverage of materials — from general steels to alloyed materials — with good wear resistance and edge stability. How does the T3225 grade affect machining performance? Tungaloy’s T3225 grade provides a blend of hardness and toughness that reduces wear while maintaining cutting-edge stability, so the SNMU 1706AN T3225 supports longer tool life and consistent surface finishes in serial milling operations. How to ensure the insert fits the cutter body correctly? Correct fit requires the insert seat, geometry and cutter body to be technically matched; the SNMU 1706AN features a cylindrical hole with a 40°–60° double countersink, so check the cutter’s mounting specification for compatibility before assembly. How many cutting edges are available per insert? As a square indexable insert, the SNMU 1706AN normally provides multiple usable edges that can be indexed to extend service life; exact edge count depends on the chosen corner radius and seating method. What clamping features should be observed during installation? Use the appropriate clamping screw and torque for the cutter system, ensure the insert sits flat in the pocket and that the countersink aligns with the screw head to achieve secure, repeatable positioning. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SNMX 120716 FX105 Wendeplatten - Tungaloy
Take advantage of the combination of FX105 wear resistance, carbide construction and ISO-compliant geometry for dependable turning performance; the square, 90° insert with a 1.6 mm corner radius ensures stable cuts and predictable tool life. Order directly via Metav Werkzeuge or ask the consultants for application-specific recommendations. SNMX120716 FX105 SNMX ISO turning insert for Drehen, Tungaloy The SNMX120716 FX105 is a square ISO indexable turning insert designed for external and internal turning applications, offering a 90° included angle and a robust corner radius for stable engagement. ISO-compliant geometry for reliable fit FX105 grade for wear resistance Square insert with 90° included angle Corner radius 1.6 mm for stable cutting Consistent geometry for accurate turning and predictable machining results The square, ISO-compliant geometry of this indexable insert delivers repeatable positioning and consistent cutting performance across tool changes. With a 90° included angle and a 1.6 mm corner radius, the insert provides a balance between edge strength and accessible cutting geometry, reducing radial loads on the toolholder. For shops seeking predictable chip formation and dimensional stability, the standardised form and thickness simplify integration into existing turning tool systems and support efficient machine setup. FX105 grade and carbide base for enhanced edge stability and wear control The proprietary FX105 grade, combined with a carbide substrate, emphasises wear resistance while retaining sufficient toughness to withstand interrupted cuts. This results in extended index life under mixed cutting conditions and improved surface finish consistency. When matched with an appropriate chipbreaker and cutting parameters, the grade supports productive metal removal rates without sacrificing edge integrity, making it suitable for a wide range of steels and similar materials used in turning operations. System compatibility and practical specification guidance for reliable assembly Compatibility with a chosen holder depends on shape, clearance angle, tolerance class, clamping method, size and thickness; the insert’s dimensions—nominal size 12 mm and plate thickness 7.94 mm—align with ISO turning plate standards. The special bore and chipbreaker designation require verifying holder interface and clamping hardware before assembly. For secure operation, select an appropriately rated external or boring bar holder, matching the insert orientation and using the correct pad or shim configuration to maintain clamp preload and repeatability. Contact Metav Werkzeuge to discuss the Tungaloy SNMX120716 FX105 for your turning process, request the exact mounting specifications or a cutting-data recommendation; Metav Werkzeuge can provide application advice and availability information — info@metav-werkzeuge.com, +49 2822 7131930 Technical data Article number: 6835723 Manufacturer SKU: TUN6835723 SKU: 6835723-Tungaloy Model series: ISO-Drehwendeschneidplatten Material: Hartmetall Grade: FX105 Application: Drehen Facts ISO designation: 120716 Size: 12 mm Plate thickness: 7.94 mm Corner radius: 1.6 mm Clearance angle: 0° Included angle: 90° Plate shape: square Bore: special Special features Tungaloy carbide grade FX105 ISO-compliant indexable insert Special chipbreaker style Compatibility depends on form, tolerance, clamping Suitable for external and internal turning FAQ What materials is this insert suited for? The SNMX120716 FX105 insert, a Tungaloy indexable turning insert, is designed for general turning tasks and is best paired with the correct chipbreaker and cutting data for steels and similar materials. How does the FX105 grade benefit tool life? FX105 provides a combination of wear resistance and toughness that enhances edge stability and extends the indexable insert’s service life under typical turning conditions. Which dimensions determine holder compatibility? Holder compatibility is driven by the insert’s ISO designation, plate size (12 mm), thickness (7.94 mm), clearance angle (0°) and bore style; these must match the toolholder’s specifications for secure clamping. Is the corner radius suitable for finishing cuts? The 1.6 mm corner radius offers a balance between edge strength and finish capability; it is well suited to robust finishing and medium-undercut roughing where edge stability is required. Can the insert be used for internal and external turning? Yes, the ISO series construction and square form make it applicable to both external and internal turning when combined with an appropriate external holder or boring bar. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SPGA 090304 NS9530 Wendeplatten - Tungaloy
Benefit from the combination of precise finishing performance from the NS9530 cermet grade and the flexible multidirectional capability of the AddMultiTurn system; the result is consistent high-surface-quality turning with low cutting forces and reliable clamping stability. Order the insert directly via Metav Werkzeuge or consult our specialists for application support. SPGA090304 NS9530 indexable insert for turning — Tungaloy, uncoated cermet finishing grade SPGA090304 NS9530 is an indexable insert for turning applications, designed for use in the AddMultiTurn multidirectional system and optimised for finishing steel. Uncoated cermet NS9530 finishing grade Sharp cutting edge for improved surface finish Compatible with AddMultiTurn multidirectional systems Square insert with cylindrical hole for secure clamping Precision finishing for demanding turning operations The SPGA090304 insert combines the NS9530 uncoated cermet grade with a geometry tailored for low cutting forces and excellent surface quality. As a finishing-grade cermet, it preserves a sharp cutting edge that reduces built-up edge and helps achieve consistent mirror-like surfaces on steel components. This makes the insert particularly suitable for continuous cutting and small depths of cut where a refined finish and dimensional accuracy are required. The industrial design supports predictable chip flow even when cutting parameters vary within finishing ranges. Geometry and clamping designed for stability and repeatability A square indexable insert with a nominal 90° approach angle and a 0.4 mm corner radius, the insert provides a balanced contact zone between insert and workpiece. The 11° relief minimises rubbing behind the cutting edge, while the 3.18 mm thickness contributes to rigidity under light-to-moderate finishing loads. The plate is supplied with a cylindrical hole, enabling positive clamping in compatible holders and reducing the risk of micro-movements that would compromise surface quality. These features translate into dependable repeatability and fewer part rework cycles in serial production. System compatibility and process advantages Designed for the AddMultiTurn model series, the insert integrates into a system composed of the holder, changeable inserts and a clamping arrangement. The multidirectional concept allows a single tool to address several cutting directions, reducing tool changes and setup times. In practice, this improves process efficiency and throughput while maintaining the high-quality finish expected from a finishing-grade insert. For shops prioritising predictable surface quality and economical finishing, the combination of the NS9530 grade and the AddMultiTurn system provides both technical performance and practical productivity gains. For tailored application advice or to request the TUN6997945 reference, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 — consultants can recommend holders and cutting data for specific steel grades. Technical data Article number: 6997945 SKU: 6997945-Tungaloy Manufacturer SKU: TUN6997945 Facts Corner radius: 0.4 mm Plate thickness: 3.18 mm Approach angle: 90° Relief angle: 11° Plate size: 09 Special features Material: carbide Grade: NS9530 (uncoated cermet) Shape: square insert Hole: cylindrical hole Typical application: turning (finishing) Model series: AddMultiTurn (multidirectional turning system) System composition: holder, indexable inserts and clamping system FAQ Which materials is this insert intended for? The SPGA090304 NS9530 insert is optimised for finishing operations in steel, where the uncoated NS9530 cermet grade delivers low cutting forces and excellent surface quality. What are the key geometric specifications to consider? Key dimensions include a 0.4 mm corner radius, 3.18 mm plate thickness, 90° approach angle and an 11° relief, providing a balance of edge strength and finish capability. Is the insert coated or uncoated? This insert is an uncoated cermet in the NS9530 grade, chosen to maintain a sharp cutting edge for high-quality finishing. Can the insert be used in multidirectional tool systems? Yes, the insert is designed for the AddMultiTurn multidirectional turning system and is compatible with holders that accept the SPGA090304 geometry and cylindrical hole clamping. How should the insert be referenced when ordering? Reference the article number 6997945 or the manufacturer SKU TUN6997945 and specify the SPGA090304 NS9530 Tungaloy indexable insert for turning when enquiring. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SPGM 090304 NS9530 Wendeplatten - Tungaloy
Take advantage of a precise finishing solution that combines an uncoated cermet cutting material with a low cutting force geometry and a secure clamping design. The result is consistent surface quality and longer edge life in continuous turning of Stahl. Order the SPGM090304 NS9530 insert directly via Metav Werkzeuge or ask our consultants if needed. SPGM 090304 NS9530 Tungaloy indexable insert for turning — square, 11° relief The SPGM090304 NS9530 is a square ISO indexable turning insert designed for fine finishing of Stahl in external and internal turning operations. Uncoated cermet for fine finishing Square insert, 09 size, 0.4 mm corner radius 11° relief angle for stable cutting 3.18 mm plate thickness for rigidity Cylindrical hole for secure clamping Precise finishing performance for continuous turning The uncoated cermet grade NS9530 is engineered for finishing cuts on Stahl, offering a sharp cutting edge with low cutting forces and excellent surface quality. The fine-grain cermet substrate reduces built-up edge formation during continuous, light-depth passes, which leads to more consistent part surfaces and fewer rework cycles. In practice, this means the insert supports higher reproducibility on finishing operations and helps maintain dimensional tolerances with minimal thermal influence. Stable clamping and geometry for predictable tool life A combination of a square plate form, a 0.4 mm corner radius and a 3.18 mm plate thickness delivers mechanical stiffness and predictable edge behaviour. The 11° relief angle reduces flank contact, lowering friction and heat generation at the cutting edge. The centre cylindrical hole provides secure location in standard ISO turning holders, while the single-sided chipbreaker is configured for controlled chip formation in finishing regimes. These attributes reduce vibration and support repeatable cutting conditions across batches. Application guidance and productivity benefits Intended primarily for external and internal turning of Stahl, the insert suits finishing and light-precision machining where surface integrity is critical. Select the chipbreaker and grade to match the workpiece material, machining stability and feed rates — this will optimise chip control and maximise edge life. Practical advantages include shorter inspection times due to improved surface finishes, and reduced downtime from fewer insert changes during continuous runs. If further specification advice is required, technical details and process recommendations are available to aid integration into existing turning cycles. For reliable finishing with the Tungaloy NS9530 grade and secure clamping performance, contact Metav Werkzeuge for procurement or application advice — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6997942 Manufacturer SKU: TUN6997942 Manufacturer article number: 6997942 Facts Insert designation: SPGM090304 Grade: NS9530 Substrate type: uncoated cermet Plate thickness: 3.18 mm Corner radius: 0.4 mm Relief angle: 11° Plate size: 09 Plate form: square Bore: with hole (cylindrical) Chipbreaker: one-sided Application: turning Manufacturer: Tungaloy Special features ISO-standard indexable turning insert Designed for finishing of Stahl Sharp cutting edge for low cutting forces Secure clamping via cylindrical centre hole Compatible with matching ISO holders, clamps and screws FAQ What machining operations is this insert intended for? The SPGM090304 NS9530 insert is intended for external and internal turning, primarily for finishing operations on Stahl. How does the NS9530 grade affect surface finish? The NS9530 uncoated cermet provides a sharp cutting edge with low cutting forces, which improves surface quality and reduces the risk of built-up edge during continuous finishing passes. Which holder features are required for correct fitment? Compatibility is determined by insert form, relief angle, tolerance class, clamping method, size and thickness; the square SPGM090304 locates via its cylindrical hole in ISO turning holders designed for 09-sized plates. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SPGM 120304 NS9530 Wendeplatten - Tungaloy
The product data contains a conflict: the cutting material is listed both as "Hartmetall" and as "uncoated cermet". This inconsistency makes it difficult to accurately determine the correct specifications for the item, which is essential for ensuring the product meets the required standards and expectations. Please provide corrected material information so a full product description can be generated, allowing for a clear and precise representation of the product's features, properties, and intended applications. Resolving this issue promptly will help avoid potential misunderstandings or errors in the manufacturing, marketing, or usage of the product in question.
SPGM 120308 NS9530 Wendeplatten - Tungaloy
Benefit from precise finishing with a sharp cermet cutting edge and ISO compatibility that ensures secure clamping and consistent results. Choose the combination of NS9530 cermet performance and standardised dimensions for reliable finishing of steel components — order directly via Metav Werkzeuge or consult the team for application advice. SPGM 120308 NS9530 — Tungaloy turning indexable insert, square 12 mm, cermet finishing grade The SPGM 120308 NS9530 is an ISO‑standard square insert designed for finishing operations in steel turning, offering a sharp edge and low cutting forces for excellent surface quality ISO square insert 12 mm, 3.18 mm thick Uncoated cermet grade NS9530 for finishing Sharp cutting edge for superior surface finish Single-sided chipbreaker, 11° clearance High-quality finishing through cermet edge control The uncoated cermet grade NS9530 delivers a consistently sharp cutting edge, optimised for fine finishing of steel components. Its composition supports stable cutting at small depths of cut and during continuous feed conditions, which reduces the risk of built-up edge and improves repeatability. This results in a high surface finish and lower rework rates, helping to keep production runs predictable and efficient. The result is predictable part quality with less manual polishing or secondary operations. ISO compatibility and secure seat for repeatable machining Designed to the ISO designation SPGM120308, the insert’s geometry and tolerance ensure compatibility with standard external holders and boring bars when form, relief angle and fastening match. Key dimensions — 12 mm size, 3.18 mm thickness and 0.8 mm corner radius — combine with an 11° clearance to give a stable cutting position and accurate tool projection. The cylindrical locating hole and square format aid repeatable clamping and quick index changes, so setups are faster and concentricity is maintained across tool changes. Application-focused advantages for turning operations As a finishing grade, this insert excels in external and internal turning where low cutting forces and fine surface requirements are paramount. The single-sided chipbreaker is tuned for predictable chip formation in continuous cuts; selecting the matching chipformer and holder stability will extend edge life and maintain surface integrity. The insert is particularly suited to steel finishing tasks where minimised vibration and precise geometry deliver measurable time savings and consistent part quality. For precision finishing with Tungaloy cermet technology, contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 for tailored advice and ordering. Technical data Article number: 6997944 Manufacturer: Tungaloy Manufacturer SKU: TUN6997944 SKU: 6997944-Tungaloy Model series: ISO turning indexable inserts Application: Turning Core specifications Size: 12 mm Thickness: 3.18 mm Corner radius: 0.8 mm Clearance angle: 11° Included angle: 90° ISO designation: 120308 Design & features Substrate: hardmetal (carbide) Cutting material: uncoated cermet NS9530 Shape: square Hole: cylindrical locating hole Chipbreaker: single-sided Intended use: finishing for steel FAQ Which materials is this insert intended for? The SPGM 120308 NS9530 is formulated as a finishing grade for steel and is recommended where a sharp edge and low cutting forces are required. Is the insert suitable for both external and internal turning? Yes, the square ISO geometry and the single-sided chipbreaker make the insert suitable for external and internal turning operations when matched to an appropriate holder. What are the critical dimensions to check for holder compatibility? Check the 12 mm size, 3.18 mm thickness, 0.8 mm corner radius and 11° relief; these determine fit and clamping in standard ISO SPGM toolholders. How does the NS9530 cermet grade affect surface finish? The uncoated NS9530 cermet provides a sharp, wear‑resistant edge that reduces built-up edge and promotes a superior surface finish in finishing cuts. Does the insert require a specific chipbreaker orientation? The insert uses a single-sided chipbreaker; orientation and holder stability should be selected to match the intended feed and depth of cut for consistent chip control. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SPGN 090304 BX360 Wendeplatten - Tungaloy
Benefit from the combination of BX360 CBN performance and ISO SPGN geometry for consistent hard-turning results; the compact 0.4 mm corner radius and 90° seat ensure precise finishing and predictable insert seating. Order the SPGN090304-QBN directly via Metav Werkzeuge or consult our technical advisers for process matching. SPGN 090304 BX360 – Indexable turning insert by Tungaloy, CBN grade for hard turning The SPGN090304-QBN BX360 is an ISO-format indexable insert designed for turning and finish machining of hardened components, offering a compact square form with an 11° clearance and a 90° seating angle for secure clamping and predictable toolpath control. BX360 grade for hardened-steel finishing CBN cutting material for extreme wear resistance ISO SPGN shape with 90° geometry 0.4 mm corner radius for tight profiles Precision finishing of hardened steels with minimal rework The insert delivers a targeted benefit for end-of-line turning where surface quality and dimensional control matter. Manufactured with CBN (cubic boron nitride) in the BX360 grade, the cutting edge resists abrasive wear encountered when machining steels of high hardness, enabling reduced re-cutting and fewer touch-ups. The technology supports stable cutting at finishing feeds, so a single-pass approach to achieving tolerance and surface requirements becomes realistic, lowering total machining time. Longer in-service life and stable process performance Designed for demanding turning operations, the geometry and grade work together to extend interval lengths between insert changes. The CBN grade tolerates elevated temperatures and abrasive contact, which results in longer tool life and more consistent component runs. For manufacturers, this translates into fewer stoppages for tool exchange and a more predictable production rhythm, improving overall equipment effectiveness and cost per part over volume production. Simple integration into ISO turning systems and predictable clamping Compatibility follows ISO standards: the square SPGN format with a 90° seating angle and 11° clearance fits common external holders and boring bars when matched by form, size and thickness. The insert thickness of 3.18 mm and a 0.4 mm corner radius permit accurate profile generation while the QBN chipbreaker controls small, regular chips suitable for finishing. Note that the insert is supplied without a hole and is clamped by the appropriate seat and screw set; check holder matching for secure assembly. For application advice or to confirm holder compatibility, Metav Werkzeuge provides technical assistance at info@metav-werkzeuge.com or +49 2822 7131930. Contact Metav Werkzeuge today to specify Tungaloy BX360 inserts for hardened-steel turning and receive tailored recommendations from our machining specialists Technical data Article number: 6807050 Manufacturer SKU: TUN6807050 Supplier SKU: 6807050-Tungaloy Designation: SPGN090304-QBN Item name: SPGN090304-QBN BX360 Tungaloy insert Core specifications Size designation: 09 Thickness: 3.18 mm Clearance angle: 11° Seating angle: 90° Corner radius: 0.4 mm Materials and features Cutting material: CBN (cubic boron nitride) Substrate: cemented carbide Grade: BX360 Chipbreaker: QBN Shape: square Hole: without hole Typical application: Turning, external and internal finishing Model series: ISO turning indexable inserts Intended for: hardened steels and, depending on variant, cast iron FAQ Which materials are best suited for this insert? The BX360 CBN grade is intended primarily for hardened steels; depending on the variant, the insert can also be suitable for certain cast-iron finishing operations. The SPGN geometry supports typical hard-turning tasks. How does the QBN chipbreaker affect performance? The QBN chipbreaker is configured for finishing cuts, producing controlled, short chips and promoting consistent surface quality when used with appropriate feeds and speeds. What holder compatibility should be checked before ordering? Verify holder form, seating angle, clearance angle, tolerance class, clamping method and insert thickness. The SPGN 90° seating and 3.18 mm thickness require a matching ISO-compatible external holder or boring bar. Is the insert through-hole required for clamping? This variant is supplied without a hole and is designed for pocket clamping with the appropriate screw and clamping set; ensure the chosen holder supports a holeless SPGN insert. How can tool life be maximised with this grade? Use stable setups, optimise cutting parameters for finishing, and ensure effective chip evacuation. The BX360 CBN grade is engineered for wear resistance, which supports longer intervals between changes under suitable conditions. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SPGN 090304 LX11 Wendeplatten - Tungaloy
High-performance LX11 Tungaloy indexable insert combines wear resistance and edge stability with ISO compatibility for straightforward holder matching; it supports both external and internal turning with a reliable QBN chipbreaker. Order the insert directly via Metav Werkzeuge or contact the technical team for tailored application advice. SPGN090304-QBN — SPGN 090304 LX11 turning insert (Tungaloy) The SPGN090304-QBN turning insert is an ISO-standard, square indexable plate designed for external and internal turning where balance between wear resistance and edge stability is required ISO-standard indexable insert LX11 Tungaloy carbide grade 0.4 mm corner radius for profile stability 11° clearance angle for reliable cutting Consistent geometry for predictable machining results The insert’s ISO conformity and square geometry provide a predictable seating and repeatability in ISO holders, which ensures reproducible cutting conditions across shifts. Compatibility with a clamping system depends on form, clearance angle, tolerance class, fixings, size and thickness; this means a correct holder choice reduces chatter and improves tool life. By standardising on ISO plates, process planners benefit from fewer tool changes and simplified inventory management. Balanced grade for wear resistance and edge security Built on a Tungaloy carbide grade LX11, the plate combines hardness for wear resistance with toughness to protect the cutting edge under variable loads. The QBN chipbreaker complements the grade by controlling chip form and evacuation, which reduces heat concentration at the cutting edge and supports longer, more stable tool life. This balance is especially useful for mixed-material production where occasional interrupted cuts or variability in clamping can occur. Geometry and system integration that improve surface finish The 0.4 mm corner radius and 11° clearance angle deliver a compromise between strength at the edge and the ability to produce a good surface finish on workpieces. The square 09 size and 3.18 mm plate thickness provide a robust contact area in the holder, aiding vibration damping for finishing passes. Selection of the right chipbreaker and grade for the workpiece material is decisive: pairing the plate with suitable holders and a correctly adjusted feed yields consistent dimensional accuracy and surface quality in both external and internal turning. Contact Metav Werkzeuge for application guidance and to order the SPGN090304-QBN insert; specialist advice is available to match holder geometry and cutting data to the workpiece material Technical data Article number: 6807046 SKU: 6807046-Tungaloy Manufacturer SKU: TUN6807046 Model series: ISO indexable turning inserts Article name: SPGN090304-QBN LX11 Tungaloy insert Core dimensions Corner radius: 0.4 mm Clearance angle: 11° Included angle: 90° Plate thickness: 3.18 mm Size: 09 Materials & features Material: carbide Grade: LX11 (Tungaloy) Chipbreaker: QBN Hole: without hole Plate form: square Application: turning (external and internal) Compatibility: determined by form, clearance angle, tolerance class, clamping, size and thickness System components: matching external holder or boring bar, shim/clamp set and replacement screws FAQ What applications suit this indexable plate best? The SPGN090304-QBN insert is designed for general turning applications, suitable for both external and internal turning where a square 09 format and a 0.4 mm corner radius are appropriate. Which materials can be machined with this grade? The LX11 Tungaloy carbide grade is optimised to balance wear resistance and toughness, making the plate suitable for a broad range of steels and mixed production environments; select the chipbreaker according to the workpiece material. How is holder compatibility ensured for these ISO plates? Compatibility is ensured by matching the insert form and dimensions to the holder; key parameters are form, clearance angle, tolerance class, clamping method, size and thickness as noted for ISO-standard plates. Is the chipbreaker suitable for finishing? The QBN chipbreaker provides controlled chip formation and evacuation; when combined with the right feeds and speeds it supports improved surface finish and dimensional stability. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SPGN 090304 TH10 Wendeplatten - Tungaloy
Taking advantage of the sharp TH10 grade and the ISO-compliant square geometry, this insert delivers low cutting forces and clean surface finishes in non‑ferrous turning operations; order the SPGN 090304 TH10 insert directly via Metav Werkzeuge or ask our consultants if needed. SPGN 090304 TH10 ISO turning insert, square QBN chipbreaker — Tungaloy The SPGN 090304 TH10 is a square ISO turning insert for external and internal turning, designed for non‑ferrous materials and applications that benefit from a sharp, uncoated cutting edge. Sharp uncoated carbide grade TH10 Square 90° cutting angle for facing and turning Chipbreaker QBN for controlled swarf 0.4 mm corner radius for fine surface finish ISO interchangeability for quick tool change Engineered to reduce cutting forces and improve finish The uncoated cemented carbide grade TH10 is formulated to provide a very sharp cutting edge that reduces cutting forces in soft and non‑ferrous alloys. This results in lower cutting forces and a clean surface finish, particularly where a delicate edge is advantageous. Because the grade is uncoated, adhesion and built‑up edge on materials such as aluminium and certain non‑ferrous alloys are minimised, helping to preserve dimensional accuracy during finishing passes. Geometry that supports predictable chip control The insert’s square geometry and 90° cutting angle create a stable cutting edge for facing and straight turning, while the chipbreaker QBN actively shapes swarf for consistent evacuation. The combination of a corner radius 0.4 mm and an 11° relief balances edge strength with low cutting resistance, delivering predictable tool behaviour and repeatable results across batches. These geometry features translate into fewer interruptions during short, repetitive cycles. ISO compatibility for straightforward integration As an ISO‑series turning insert, this part is designed for ISO interchangeability, which simplifies stocking and reduces changeover time. Key dimensions such as the insert size 09 and a plate thickness of 3.18 mm follow standard conventions, so the component mates with compatible ISO holders that match form, relief, tolerance class, fastening style, size and thickness. The standardisation supports faster setup and predictable tool replacement in production environments. Suited applications and material guidance This insert excels in turning operations with a focus on non‑ferrous materials, where a sharp, uncoated edge improves surface quality and reduces burr formation. Recommended use cases include external and internal turning where low cutting forces and clean finishes are priorities. The uncoated carbide grade performs well in finishing and light‑to‑medium machining of aluminium, brass and similar alloys, providing consistent results when combined with suitable feeds and speeds for the workpiece material. Practical advantages for production workflows Integrating this ISO square insert into a machining cell supports efficient tool handling and consistent process output. The clear geometry and chip control reduce variability, while the standard dimensions ease inventory management. Choosing this insert can contribute to stable cycle times and reliable surface quality across repetitive components, allowing operators and process planners to focus on optimisation rather than constant readjustment. For application advice, availability and ordering of the Tungaloy SPGN 090304 TH10 insert, please contact Metav Werkzeuge via email at info@metav-werkzeuge.com or by telephone on +49 2822 7131930 Technical data Article number: 6807047 Manufacturer SKU: TUN6807047 Metav SKU: 6807047-Tungaloy Facts Thickness: 3.18 mm Corner radius: 0.4 mm Relief angle: 11° Cutting angle: 90° Insert size: 09 Special features Shape: square Material: cemented carbide (uncoated) Grade: TH10 Chipbreaker: QBN Hole: none Application: turning ISO series: ISO turning inserts FAQ Which materials is this insert designed for? The SPGN 090304 TH10 insert is optimised for non‑ferrous materials such as aluminium and brass, where the uncoated cemented carbide edge supports low cutting forces and good surface quality. What does the TH10 grade indicate? TH10 denotes an uncoated, sharp universal carbide grade intended for applications that require a keen edge to reduce cutting resistance and achieve clean finishes on non‑ferrous workpieces. How does the chipbreaker QBN affect machining? The QBN chipbreaker shapes swarf for reliable evacuation and reduces the risk of entanglement, improving process stability during both external and internal turning operations. Is the insert compatible with standard ISO holders? Yes, the insert follows ISO dimensions (insert size 09, thickness 3.18 mm) and is compatible with holders that match its form, relief, tolerance class, fastening and thickness. What influence does the 0.4 mm corner radius have on the part surface? A 0.4 mm corner radius provides a balance between edge strength and a fine surface finish, making it suitable for finishing passes and operations where dimensional consistency is important. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
SPGN 090308 BX360 Wendeplatten - Tungaloy
Benefit from the combination of the BX360 CBN grade for wear‑resistant finishing, the AddMultiTurn multidirectional system compatibility and the precise 90° square geometry for consistent process security; order the insert directly via Metav Werkzeuge or contact our consultants for application advice. SPGN 090308 BX360 indexable insert — CBN grade for hardened steels, square 90° geometry (Tungaloy) SPGN 090308 BX360 is an indexable insert designed for multidirectional turning and high‑hardness finishing, delivering stable edge life and repeatable results in demanding production environments CBN grade BX360 for hardened steels Compatible with AddMultiTurn system Square 09 insert with 90° geometry No hole; chipbreaker‑free design Maximise throughput on hardened components The BX360 grade, based on cubic boron nitride (CBN), is formulated for high‑hardness machining and wear‑intensive finishing operations. When applied to hardened steels the CBN cutting edge maintains a stable cutting line longer than conventional carbide grades, reducing tool change frequency and unplanned downtime. The result is measurable process efficiency: higher material removal rates at finishing feeds and a predictable tool life that supports lean production planning. Predictable edge condition for superior surface finish The square 90° geometry combined with a 0.8 mm corner radius provides good support for finishing passes while limiting vibration on slender parts. This geometry helps to produce consistent, tight tolerance surfaces during longitudinal, facing and profile turning operations. The insert’s 11° clearance angle reduces rubbing in interrupted cuts and contributes to improved surface integrity, making it suitable for precision finishing where component appearance and dimensional control are critical. System compatibility and handling benefits Designed for the AddMultiTurn multidirectional turning system, the insert integrates into a holder–insert–clamping concept that simplifies toolsetting for several cutting directions with a single tool. The square format (09) and the absence of a hole or chipbreaker make mounting straightforward and reduce setup complexity. The insert’s cemented carbide body ensures mechanical stability while the CBN cutting layer provides the required hardness for finishing hardened materials. Materials, applications and recommended use Primarily intended for turning of hardened steels and, depending on execution, suitable for cast iron finishing, this insert excels in end‑of‑line machining where wear resistance and surface quality are decisive. The design targets finishing and near‑finish passes rather than heavy roughing, offering a blend of process security and repeatable performance that supports high‑mix, low‑volume and serial production alike. For application support, stock information or to discuss suitability for a specific hardened component, contact Metav Werkzeuge — info@metav-werkzeuge.com or call +49 2822 7131930; our consultants will advise on the Tungaloy SPGN 090308 BX360 application and availability Technical data Article number: 6807054 Manufacturer SKU: TUN6807054 SKU: 6807054-Tungaloy Model series: AddMultiTurn Name: SPGN090308 BX360 Tungaloy indexable insert Facts Corner radius: 0.8 mm Included angle: 90° Clearance (relief) angle: 11° Plate thickness: 3.18 mm Plate size: 09 Special features Material: cemented carbide body Cutting material: cubic boron nitride (CBN), grade BX360 Insert shape: square Hole: none Chipbreaker: none Intended use: turning, finishing of hardened steels System compatibility: AddMultiTurn multidirectional turning system FAQ What materials is this insert suitable for? The SPGN 090308 BX360 insert is primarily intended for hardened steels and, depending on the execution, can be used for cast iron finishing; the CBN cutting phase ensures wear resistance in high‑hardness applications. Which tool system accepts this insert? This indexable insert is designed for the AddMultiTurn multidirectional turning system and matches holders intended for square 09 inserts with 90° geometry. Is there a chipbreaker or mounting hole on the insert? No — the SPGN 090308 BX360 is supplied without a hole and without a chipbreaker, allowing specific holder clamping and finishing process strategies. How does the corner radius affect performance? The 0.8 mm corner radius provides a compromise between strength and surface finish, supporting stable cutting in finishing operations while limiting thermal and mechanical stress on the CBN edge. What is the manufacturer SKU and article number for ordering? The product is listed as SKU 6807054‑Tungaloy with the manufacturer article number 6807054; the internal manufacturer SKU is TUN6807054. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
SPGN 090308 DX140 Wendeplatten - Tungaloy
Benefit from the combination of PCD grade DX140, a 90° insert geometry and the AddMultiTurn system to increase machining speed and reduce tool changes; this insert is optimised for aluminium and other non-ferrous materials and supports sustained production runs. Order the SPGN090308 DX140 insert directly via Metav Werkzeuge or consult the technical advisers for setup guidance. SPGN090308 DX140 — indexable insert for turning, 90° multidirectional system (Tungaloy) A SPGN090308 DX140 insert engineered for multidirectional turning applications, suitable for longitudinal, facing and profile turning with a robust clamping and holder system. PCD grade DX140 for aluminium and non-ferrous metals Multidirectional AddMultiTurn system compatibility 90° geometry for versatile turning operations Long tool life and high cutting-speed capability Faster cycles through high-speed-capable PCD grade The insert uses polycrystalline diamond (PCD) in the DX140 grade, which enables significantly higher cutting speeds when machining soft to abrasive non-ferrous materials such as aluminium and certain non-metals. The material choice reduces wear rates compared with conventional carbide in these applications, leading to fewer tool changes and higher uptime. This delivers a measurable improvement in cycle time and process efficiency, particularly where sustained surface quality is required. Geometry and system features that stabilise the process Designed for a 90° cutting approach within a multidirectional turning system, the insert's square form and 0.8 mm corner radius provide a balance between edge strength and detail in profile work. The 11° clearance angle supports reliable chip flow and stable cutting forces, while the 3.18 mm thickness gives secure engagement with standard holders. Combined with the AddMultiTurn series' holder, insert and clamping setup, the result is a mechanically consistent package that reduces vibration and promotes repeatable part quality. Economic benefits from extended tool life and predictable performance Because the SPGN090308 DX140 insert is optimised for abrasive and non-ferrous materials, the operating window favours higher feed rates and longer tool life, which lowers cost per component. The indexable format and proven clamping arrangement cut downtime for regripping or replacement, improving throughput. Clear product identification (SKU: 6807053-Tungaloy) and the model series AddMultiTurn simplify tool management in the workshop and support seamless integration into existing turning routines. Contact Metav Werkzeuge to discuss machining parameters for the SPGN090308 DX140 insert or to request immediate availability—email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6807053 SKU: 6807053-Tungaloy Manufacturer SKU: TUN6807053 Series: AddMultiTurn Designation: SPGN090308 Manufacturer: Tungaloy Core data Geometry: 90° Corner radius: 0.8 mm Clearance angle: 11° Thickness: 3.18 mm Shape: square (size 09) Hole: without hole Special features Cutting material: polycrystalline diamond (PCD) Grade: DX140 Substrate: cemented carbide Application: turning (longitudinal, facing, profiling) System composition: holder, indexable inserts, clamping system Chipbreaker: without chipbreaker Best for: aluminium, non-ferrous metals and abrasive non-metals Typical advantages: high cutting speeds, long tool life, stable cutting behaviour FAQ What materials is this insert intended for? The SPGN090308 DX140 insert is designed primarily for aluminium, other non-ferrous metals and abrasive non-metals; the PCD cutting material and DX140 grade provide wear resistance and high cutting-speed capability. Does the insert include a chipbreaker? This SPGN090308 DX140 is supplied without a chipbreaker; chip control is achieved through cutting parameters, holder geometry and machine setup. What does the 0.8 mm corner radius mean for machining? A 0.8 mm corner radius improves edge strength for profile and finishing passes while still allowing detail; it is suitable where a compromise between durability and contour accuracy is required. Is this insert compatible with multidirectional turning systems? Yes, the insert is part of the AddMultiTurn model series and is intended for multidirectional turning with matching holders and clamping systems. Which SKU should be ordered for this specific insert? Order using SKU 6807053-Tungaloy or the manufacturer SKU TUN6807053 to ensure the correct SPGN090308 DX140 insert is supplied. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SPGN 090308 LX10 Wendeplatten - Tungaloy
Combining wear resistance, stable cutting-edge performance and a compact square geometry, this insert reduces tool changes and supports efficient multidirectional turning. Order the SPGN090308 LX10 Tungaloy turning insert directly via Metav Werkzeuge or ask our consultants if needed. SPGN090308 LX10 square turning insert (90°) for multidirectional turning — Tungaloy AddMultiTurn The SPGN090308 LX10 is a square indexable insert intended for multidirectional turning within the AddMultiTurn system, suitable for longitudinal, facing and profiling operations. Multidirectional turning capability LX10 grade for wear resistance Square insert with 90° geometry Corner radius 0.8 mm for profile accuracy Fewer tool changes through multidirectional machining The AddMultiTurn concept integrates a holder, indexable inserts and a clamping system to enable machining in multiple directions with a single tool body. By combining multidirectional turning capability with a square geometry and a 90° corner, the system reduces the need for tool swaps and reorientation. This improves process reliability and shortens cycle times in batch or series production by lowering non-cutting time and simplifying tool management on the shop floor. The result is a measurable gain in efficiency for turning operations. Consistent edge life and surface quality from the LX10 grade The LX10 carbide grade is formulated to complement the insert geometry with a balance of wear resistance and edge stability, which supports repeatable surface finish and dimensional control. For operators less familiar with grade nomenclature: this means the substrate and coating combination is selected to resist abrasive wear while maintaining sufficient toughness to withstand interrupted cuts. The balanced properties of the grade help maintain tool life under varying feed and depth-of-cut conditions, contributing to lower rework rates and steadier part quality. Simple integration and secure clamping for uninterrupted production The square, indexable format and standard dimensions make the insert straightforward to mount in compatible toolholders. The square insert profile and lack of a central hole permit secure clamping and fast indexing, while the corner radius 0.8 mm provides a compromise between profile definition and cutting-edge strength. The insert’s 3.18 mm thickness and compact form factor mean a robust seating in the toolholder, supporting repeatable positioning and reduced vibration—factors that preserve tool life and surface finish during longitudinal, facing and profiling turning. Contact Metav Werkzeuge today to discuss the SPGN090308 LX10 Tungaloy insert for the AddMultiTurn system or to request tailored advice from our application consultants via info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 6852137-Tungaloy Manufacturer SKU: TUN6852137 Manufacturer article no.: 6852137 Brand: Tungaloy Model series: AddMultiTurn Material: cemented carbide Measurements Insert geometry: 90° Corner radius: 0.8 mm Clearance angle: 11° Thickness: 3.18 mm Size: 09 Special features Square insert form No central hole No chipbreaker Grade: LX10 (Tungaloy) Intended for turning: longitudinal, facing and profiling FAQ What machining tasks is this insert designed for? The SPGN090308 LX10 insert is intended for turning operations, specifically longitudinal, facing and profiling turning within a multidirectional AddMultiTurn setup. What is the corner radius and how does it influence the result? The corner radius is 0.8 mm; this radius improves profile accuracy while providing cutting-edge strength for the SPGN090308 LX10 Tungaloy insert, helping to balance finish and durability. Does the insert include a chipbreaker or a central hole? The SPGN090308 LX10 insert is supplied without a chipbreaker and without a central hole, relying on the holder’s clamping design for secure seating and chip control. Which system and mounting concept is this compatible with? This insert is part of the AddMultiTurn model series and is intended for use with matching holders and clamping systems that enable multidirectional turning with a single tool body. What are the core benefits of the LX10 grade? The LX10 grade provides a combination of wear resistance, toughness and edge stability, delivering consistent tool life and reliable cutting performance under typical turning conditions. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SPGN 090308 LX11 Wendeplatten - Tungaloy
Take advantage of the combination of LX11 wear resistance, a carbide substrate and a compact 0.8 mm corner radius for stable cutting performance in multidirectional turning; order the insert directly via Metav Werkzeuge or consult the Metav specialists for application support. SPGN 090308 LX11 indexable insert for turning — Tungaloy SPGN090308 LX11 is a square indexable turning insert engineered for multidirectional use in the AddMultiTurn system, suitable for longitudinal, facing and profile turning operations. Multidirectional turning system compatibility LX11 grade for wear resistance Carbide substrate for edge stability 0.8 mm corner radius, 90° cutting angle Consistent edge life through optimised material selection The combination of the LX11 grade and a robust carbide substrate provides a balanced mix of wear resistance and toughness, helping to extend tool life under varied cutting conditions. LX11 is formulated to complement the insert geometry so that stable chip formation and reliable edge behaviour are achieved during both light finishing cuts and heavier passes. This results in fewer tool changes and more predictable process windows on production runs. Greater process flexibility with multidirectional cutting Designed for the AddMultiTurn system, the insert supports multidirectional machining with a single tool body, enabling longitudinal, facing and profile turning without frequent indexable changes. The square 09 format and the 90° approach angle allow efficient orientation in the toolholder, while the absence of a chipbreaker keeps the edge suitable for fine finishing paths where surface quality matters. The result is higher machine utilisation and reduced fixture complexity when switching between directions. Compact geometry for precision and secure clamping A corner radius of 0.8 mm combined with a plate thickness of 3.18 mm delivers a stable cutting edge that withstands deflection and vibration in restrained setups. The insert is supplied without hole and in a square form, so it fits clamping systems that rely on friction and top clamps in the AddMultiTurn family. The compact geometry assists in achieving tight tolerances and consistent repeatability in batch production, especially where profile accuracy and surface finish are priorities. Practical advantages for workshop integration The insert’s standard ISO designation and the SPGN format simplify tool selection in automated tool management systems. Compatibility with established holders, combined with the Tungaloy material grade, supports predictable turnaround times and reduced set-up effort. With its focus on stable chip control and edge security, the insert contributes to lower overall tooling costs and improved throughput when integrated into a coherent turning strategy. Contact Metav Werkzeuge for tailored application advice or to order genuine Tungaloy LX11 indexable inserts — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6807051 SKU: 6807051-Tungaloy Manufacturer SKU: TUN6807051 Name: SPGN090308 LX11 Tungaloy indexable insert Core specifications ISO designation: 090308 Insert size: 09 Plate thickness: 3.18 mm Corner radius: 0.8 mm Approach angle: 90° Clearance angle: 11° Design & features Material: carbide Grade: LX11 (Tungaloy) Model series: AddMultiTurn Application: turning (longitudinal, facing, profiling) Shape: square Hole: without hole Chipbreaker: without FAQ Is this insert suitable for profile turning? The SPGN090308 LX11 Tungaloy indexable insert is specified for longitudinal, facing and profile turning and is compatible with the AddMultiTurn multidirectional turning system for those operations. What does the LX11 grade provide in this insert? LX11 is a Tungaloy grade that improves wear resistance and edge stability, helping the insert maintain a consistent cutting edge under varying loads. Which toolholders are compatible with this square insert? Square format holders designed for the SPGN09 series and the AddMultiTurn system are compatible; the insert is supplied without a fixing hole and requires holders that clamp the square plate securely. How does the 0.8 mm corner radius affect finish and strength? A 0.8 mm corner radius balances edge strength and the ability to produce fine surface finishes, offering improved resistance to chipping while allowing precise profile control. Is a chipbreaker included on the insert? This SPGN090308 LX11 insert is supplied without a chipbreaker, making it suitable for finishing applications where chip form and surface finish are prioritised. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SPGN 090308 TH10 Wendeplatten - Tungaloy
Take advantage of the combination of a sharp TH10 grade, the multidirectional AddMultiTurn system and a compact square geometry for efficient turning operations; order the insert directly via Metav Werkzeuge or contact the consultants for application advice. SPGN 090308 TH10 square turning insert for turning — Tungaloy The SPGN090308 TH10 is a square indexable insert designed for multidirectional turning in the AddMultiTurn system, optimised for longitudinal turning, facing and profiling of non-ferrous materials and similar applications. Multidirectional AddMultiTurn compatibility Uncoated carbide TH10 for low cutting forces Square 09 size with 90° geometry 0.8 mm corner radius for fine finishing Reliable performance in multidirectional turning The AddMultiTurn platform enables multiple cutting directions with a single toolholder, delivering process stability in mixed turning tasks. The insert’s square geometry and 90° entry angle provide consistent contact conditions during longitudinal and facing operations, which reduces setup complexity. Designed for industrial production, the system construction comprises a holder, changeable inserts and a robust clamping arrangement to ensure repeatable positioning and minimal runout. Geometry engineered for surface quality and edge strength A 0.8 mm corner radius and a 11° relief angle balance edge strength and surface finish, permitting controlled engagement during profiling and finishing passes. The plate thickness of 3.18 mm contributes to stability under moderate to heavy cuts, while the square form offers four usable cutting edges per indexable plate. The absence of a central hole simplifies seating in clamping designs that rely on face contact and lateral fixation. Material grade and machining suitability The uncoated carbide grade TH10 is a sharp universal grade formulated for non-ferrous materials and situations where an uncoated cutting edge reduces cutting forces and improves surface quality. Its composition supports clean chip formation and low built-up edge risk when machining softer alloys and brass-like materials, helping to maintain consistent component aesthetics and dimensional control over series runs. Integration and productivity advantages for shops As a component of the AddMultiTurn concept, the insert supports fast index changes and reduced tool inventory, which contributes to lower cycle times and higher uptime. The combination of a stable cutting edge, straightforward clamping and a universal grade means fewer tool changes across varied tasks, enhancing overall machining economy while keeping process control simple and traceable. For ordering and detailed application support for the SPGN090308 TH10 insert, contact Metav Werkzeuge for technical consultancy at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss the best holder and cutting parameters for the intended turning tasks Technical data Article number: 6807052 Manufacturer SKU: TUN6807052 Metav SKU: 6807052-Tungaloy Model series: AddMultiTurn Facts Corner radius: 0.8 mm Relief angle: 11° Insert thickness: 3.18 mm Insert size: 09 Angle: 90° Special features Grade: TH10 Material: uncoated carbide Insert form: square Hole: without hole Typical application: turning (longitudinal, facing, profiling) System components: holder, changeable inserts, clamping system Designation: SPGN090308 FAQ What materials is this insert best suited for? The SPGN090308 TH10 insert is intended primarily for non-ferrous materials and similar alloys; the uncoated TH10 grade supports low cutting forces and clean surfaces when machining these materials. Can the insert be used for profiling as well as roughing? Yes, the geometry and 0.8 mm corner radius permit both profiling and finishing passes; the insert’s thickness and square form provide sufficient edge stability for moderate roughing as well. How many edges are available per insert? With a square plate form, the insert provides four usable cutting edges; the AddMultiTurn concept and robust clamping ensure repeatable indexing. Is a special holder required for AddMultiTurn operation? The insert is designed for the AddMultiTurn system; holders compatible with this system are required to exploit multidirectional turning and secure the insert correctly. Does the insert have a chipbreaker? This designation is supplied without a dedicated chipbreaker; chip control depends on grade, cutting conditions and the chosen toolholder geometry. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SPGN 090312 BX360 Wendeplatten - Tungaloy
Take advantage of the combination of CBN cutting performance, ISO compatibility and a robust carbide substrate for consistent finishing of hardened components. The insert delivers high wear resistance and reproducible edge life for demanding turning tasks. Order the insert directly via Metav Werkzeuge or contact our consultants for application advice. SPGN 090312 BX360 – Indexable CBN Turning Insert (1.2 mm radius) by Tungaloy The SPGN 090312 BX360 is an ISO-format indexable insert designed for precision turning of hardened steels and, depending on grade, certain cast irons, combining a CBN cutting layer with a carbide substrate for high‑hardness finishing. CBN grade BX360 for hardened steels ISO-sized SPGN insert for standard holders 11° clearance angle for secure cutting 1.2 mm corner radius for stable edge Optimised finishing for hardened components This indexable insert uses a CBN cutting layer in the BX360 grade, specifically engineered for the finishing of hardened steels and selective cast-iron applications. The combination of hard CBN and a carbide substrate provides superior wear resistance and thermal stability, which translates into longer tool life and fewer insert changes. The design supports fine surface finishes and tight dimensional control during finishing passes, reducing rework and increasing process uptime. Compatibility with standard ISO toolholders ensures straightforward integration into existing turning cells. Clear, measurable installation and geometry benefits The insert follows ISO sizing and the SPGN form, so holder compatibility depends on form, clearance, tolerance class, fastening method, size and thickness. The 11° clearance angle and 1.2 mm corner radius are balanced to offer a stable cutting edge while limiting cutting forces on small radii, which helps maintain concentricity and reduces chatter in less rigid setups. Plate thickness of 3.18 mm and the square plate shape provide predictable clamping behaviour; this reduces set-up time and simplifies tool management across batches and machines. Practical advantages for workshop productivity Using a dedicated CBN grade like BX360 enables shorter cycle times and consistent finishing quality in wear‑intensive end operations. The ISO conformity of the insert family allows stocking a compact range of sizes while covering multiple turning tasks. Fewer tool changes and longer edge life also support a better cost-to-performance ratio for series production. For shops seeking reproducible results on hard materials, the insert is a practical choice to stabilise processes and improve first-pass yields. For precision turning tasks that demand high wear resistance, request availability and technical guidance on Tungaloy’s BX360 inserts from Metav Werkzeuge — contact via info@metav-werkzeuge.com or call +49 2822 7131930 for tailored advice and rapid delivery. Technical data Article number: 6807055 Manufacturer SKU: TUN6807055 SKU: 6807055-Tungaloy Manufacturer: Tungaloy Model series: ISO-Drehwendeschneidplatten Facts Corner radius: 1.2 mm Clearance angle: 11° Plate thickness: 3.18 mm Angle: 90° Plate size: 09 Special features Grade: BX360 Cutting material: CBN on carbide substrate Chipbreaker: QBN Plate form: square Hole: without hole Application: turning Material (substrate): carbide FAQ What materials is this insert suited for? The SPGN 090312 BX360 insert is specified for hardened steels and, depending on the workpiece, suitable for some cast-iron finishing operations due to its CBN cutting layer. How does the BX360 grade affect tool life? The BX360 grade combines wear-resistant CBN with a carbide substrate to deliver extended edge life and consistent performance in high‑hardness finishing tasks. Is this insert compatible with standard ISO holders? Yes — the insert is an ISO-sized SPGN plate; compatibility depends on holder form, clearance angle, tolerance class, fastening and plate thickness as per ISO guidelines. What cutting geometry should be expected from this insert? The insert provides an 11° clearance angle and a 1.2 mm corner radius, offering a compromise between edge strength and the ability to achieve fine surface finishes. Can this insert be used for roughing operations? The BX360 CBN grade is optimised for finishing and high‑hardness applications; for heavy roughing on softer materials, alternative grades or substrates may be more economical. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SPGN 090316 LX10 Wendeplatten - Tungaloy
Take advantage of the LX10 grade combined with a carbide substrate and a 1.6 mm corner radius for improved edge stability and consistent turning performance; order the insert directly via Metav Werkzeuge or contact the consultants for application guidance. SPGN090316 LX10 SPGN — ISO turning insert, 1.6 mm radius, 11° relief — Tungaloy SPGN090316 LX10 is an ISO‑standard, square turning insert designed for general external and internal turning operations, offering a balanced mix of wear resistance and edge stability for productive metalcutting. ISO‑compliant turning insert LX10 grade for wear resistance Square form with 1.6 mm radius 11° relief and 3.18 mm thickness Stable productivity through matched grade and geometry The combination of the LX10 cutting grade and a carbide body provides a robust foundation for repetitive turning tasks. The grade is chosen to balance wear resistance and toughness, reducing the frequency of insert changes and contributing to uninterrupted production cycles. With a 1.6 mm corner radius and 11° relief, the geometry supports reliable chip formation and a strong cutting edge, which helps to maintain dimensional consistency across serial components. This results in measurable process stability and fewer rejects in medium‑to‑high volume machining. Clear compatibility and secure clamping for repeatable results ISO conformity ensures predictable fitment in compatible toolholders; compatibility depends on form, clearance angle, tolerance class, fastening method, size and thickness. The square insert form and a thickness of 3.18 mm allow secure clamping in standard external holders or boring bars, while the absence of a chipbreaker simplifies selection for diverse workpiece materials. Using ISO‑matched holders and correct torque values keeps the insert seated reliably, which in turn preserves tool life and surface finish quality during turning operations. Practical advantages when machining a wide material range The carbide construction and the LX10 composition are intended to address a broad spectrum of steels and cast materials by combining edge stability with controlled wear. For interrupted cuts or unstable setups, the balanced toughness inherent to this grade reduces chipping risk; in stable setups it provides a predictable wear pattern for planning regrinds or replacements. The insert’s ISO designation and standardised geometry simplify inventory management and make it straightforward to match inserts to specific turning tasks in a mixed‑material production environment. Workshop impact and process considerations Adopting this ISO indexable plate supports lean tool management and efficient changeover. The square shape yields four usable corners per insert, improving cost efficiency per cutting edge. The 11° relief minimises rubbing on the clearance face, reducing heat build‑up and improving surface integrity. Selecting the correct holder, cutting parameters and feed per tooth relative to the 1.6 mm corner radius enables targeted removal rates while maintaining acceptable surface finish, so throughput gains are achieved without compromising part quality. For productive and reliable turning applications request the Tungaloy SPGN090316 LX10 insert through Metav Werkzeuge — call +49 2822 7131930 or email info@metav-werkzeuge.com to specify the best grade and holder combination for the task. Technical data SKU: 6852138-Tungaloy Manufacturer SKU: TUN6852138 Manufacturer item no.: 6852138 Model series: ISO turning insert series Core data Shape: square ISO designation: SPGN090316 Size code: 09 Thickness: 3.18 mm Corner radius: 1.6 mm Relief angle: 11° Geometric angle: 90° Hole: without hole Features and compatibility Grade: LX10 (Tungaloy) Material: carbide Intended application: turning Chipbreaker: none Insert form: square Compatibility depends on holder form, clearance, tolerance and fastening FAQ What materials is this insert suitable for? The SPGN090316 LX10 insert with its carbide substrate and LX10 grade is intended for turning a broad range of steels and related materials where a balance of wear resistance and toughness is required. Can the insert be used for both external and internal turning? Yes, the ISO‑standard geometry allows the insert to be employed in appropriate external holders and boring bars for both external and internal turning operations. How many usable cutting edges does the square insert offer? A square turning insert typically provides four usable corners; the SPGN090316 LX10 follows this standard, offering repeatable edge changes. Is a chipbreaker included on this insert? This insert is supplied without a chipbreaker, allowing selection of cutting conditions and holder types according to the specific material and process requirements. What should be considered when choosing the holder? Holder compatibility is determined by form, clearance angle, tolerance class, fastening and insert size; matching these factors to the SPGN090316 geometry ensures secure clamping and consistent machining behaviour. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SPGN 120302 DX140 Wendeplatten - Tungaloy
Combining the DX140 polycrystalline diamond grade with ISO conformity and a compact square form yields rapid aluminium machining and predictable long tool life; order directly via Metav Werkzeuge or consult the specialists for application support. SPGN120302 DX140 SPGN turning insert (PCD) by Tungaloy SPGN120302-DIA DX140 Tungaloy insert for high‑speed external and internal turning of aluminium, non‑ferrous and abrasive non‑metal materials High‑speed PCD grade DX140 Very long tool life and wear resistance ISO‑standard square 12 mm size 0.2 mm corner radius for fine profiling High‑speed aluminium turning with PCD performance The combination of a polycrystalline diamond (PCD) cutting edge and the DX140 grade is engineered for demanding aluminium and non‑ferrous applications. PCD delivers extremely low flank wear at elevated feeds and high cutting speeds, reducing cycle times while maintaining surface integrity. This makes the insert particularly suited to abrasive non‑metal materials where conventional coatings wear quickly. The substrate is carbide, providing mechanical support for the diamond layer and reliable edge stability during interrupted cuts. Predictable wear behaviour that increases uptime A consistent wear curve from the diamond surface results in long tool life and stable chip formation, which together lower the cost per finished part and reduce spindle downtime. The economic advantage is tangible in high‑volume production: fewer indexings and insert changes translate into shorter non‑productive intervals. When compared with coated carbide solutions in the same family of applications, the PCD grade often demonstrates a superior life‑time profile, especially under conditions of elevated cutting speed and abrasive workpiece materials. Clear ISO compatibility for straightforward tool setting This is an ISO‑standard insert supplied in a square form with a nominal size of 12 mm, a plate thickness of 3.18 mm and a 0.2 mm corner radius; the 11° clearance angle and 90° lead angle are stated for correct holder selection. Compatibility with toolholders is determined by form, clearance, tolerance class, fixing method, size and thickness; a typical system comprises an ISO insert, a matching external holder or boring bar, a shim/clamp set and fastening screws. Using standardised dimensions simplifies inventory management and ensures quick changeover between tool assemblies. Chip control and application guidance for reliable results The chipbreaker DIA geometry is tailored to evacuate swarf efficiently in aluminium and similar materials, avoiding re‑cutting of chips and reducing the risk of built‑up edge. Selection of chipbreaker and grade should match material, machining type and machine stability: for high feed finishing, a small radius provides improved profile accuracy; for roughing, a slightly larger nose radius can enhance strength. The insert is suitable for both external and internal turning operations when paired with the appropriate holder and clamping hardware. For high‑speed aluminium turning with Tungaloy’s DX140 PCD grade, contact Metav Werkzeuge for tailored application advice and fast availability via info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6807057 SKU: 6807057-Tungaloy Manufacturer SKU: TUN6807057 Name: SPGN120302-DIA DX140 Tungaloy insert Application: Turning Key numerical data Size: 12 mm Thickness: 3.18 mm Corner radius: 0.2 mm Clearance angle: 11° Insert angle: 90° ISO code: 120302 Materials and features Cutting material: polycrystalline diamond (PCD) Grade: DX140 Chipbreaker: DIA Substrate: carbide Shape: square Hole: without hole ISO‑standard turning insert FAQ What materials is this insert designed for? The SPGN120302‑DIA DX140 Tungaloy insert is designed primarily for aluminium, non‑ferrous metals and abrasive non‑metal materials, taking advantage of the PCD cutting edge for high‑speed performance. Which chipbreaker is fitted and what is its effect? The insert uses the DIA chipbreaker, optimised for controlled chip formation in soft to abrasive non‑metallic materials and non‑ferrous alloys, improving surface finish and swarf evacuation. How does the DX140 grade influence machining? The DX140 grade provides a wear‑resistant PCD layer that enables elevated cutting speeds and long tool life in suitable applications, lowering the frequency of insert changes in production. Is this insert compatible with standard ISO toolholders? Yes, the insert is an ISO‑standard type; compatibility depends on form, size, thickness and fixing method, so matching the 12 mm square form and 3.18 mm thickness to the correct holder is essential. What are the key dimensions to check before mounting? Check the 12 mm nominal size, 3.18 mm thickness, 0.2 mm corner radius and the 11° clearance angle to ensure correct seating and clamping in the toolholder. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
SPGN 120304 DX140 Wendeplatten - Tungaloy
Benefit from the combination of high cutting speeds and extended service life thanks to the DX140 polycrystalline diamond grade and ISO compatibility; the insert supports faster throughput and longer intervals between tool changes. Order the insert directly via Metav Werkzeuge or consult the technical team for application-specific guidance. SPGN 120304 DX140 — SPGN120304-DIA ISO turning insert (Turning) by Tungaloy The SPGN120304-DIA is an ISO-format indexable insert designed for high-speed turning of aluminium, non-ferrous alloys and abrasive non-metallic materials, delivering long tool life and consistent chip control in production environments. High-speed PCD cutting performance Exceptional tool life on aluminium ISO-compatible square 12 mm form Carbide substrate with DX140 grade High-speed turning with durable PCD technology The incorporation of polycrystalline diamond (PCD) cutting material in the DX140 grade enables significantly higher cutting speeds when machining aluminium and abrasive non-metals, while maintaining a stable cutting edge. The benefit is reduced cycle times and extended tool life compared with conventional grades, which translates into fewer interruptions for tool changes and a more predictable production rhythm. PCD is particularly effective on non-ferrous alloys because it resists abrasive wear and preserves geometry under thermal and mechanical load. Compatible ISO geometry for simple system integration The square plate geometry with a nominal size of 12 mm and an included angle of 90° ensures straightforward compatibility with ISO-standard toolholders. Fit is determined by form, relief angle, tolerance class, fastening method, size and thickness; the insert's 3.18 mm plate thickness and square format make it suitable for common ISO holders designed for external and internal turning. This standard conformity reduces setup complexity and enables quick insertion into existing tool systems without the need for bespoke adapters. Robust substrate and chip control for consistent surface quality A carbide substrate beneath the PCD layer provides mechanical support and damping, improving resistance to fracture under interrupted cuts. The DIA chipbreaker is optimised for aluminium and similar materials, producing controllable chip forms and reducing the risk of recutting. The combined effect is a reliable surface finish and fewer scrap parts, which supports stable process quality and predictable machining outputs in serial production. Practical selection guidance for production use When selecting an insert for a given application, match the DX140 grade and DIA chipbreaker to component material, machining strategy and machine-tool rigidity. The 11° clearance angle promotes efficient cutting with reduced rubbing, while a 0.4 mm corner radius balances edge strength and achievable surface finish. For best results, pair the insert with a rigid holder and adapt cutting parameters to exploit PCD's high-speed capability; modest increases in cutting speed often yield disproportionate reductions in cycle time when stability is sufficient. For machining demanding non-ferrous components with Tungaloy’s DX140 PCD solutions, contact Metav Werkzeuge to obtain genuine inserts and tailored application recommendations Technical Data Article number: 6807061 Manufacturer SKU: TUN6807061 SKU: 6807061-Tungaloy Model series: ISO turning inserts Name: SPGN120304-DIA DX140 Tungaloy insert Core data Corner radius: 0.4 mm Clearance angle: 11° Plate thickness: 3.18 mm Plate size: 12 mm Included angle: 90° ISO code: 120304 Features Carbide substrate Polycrystalline diamond (PCD) cutting material Grade DX140 Chipbreaker type DIA Square plate form, no hole For turning (external and internal) ISO-format indexable insert, compatible with ISO toolholders FAQ What materials is this insert best suited for? The SPGN120304-DIA insert with DX140 PCD is optimised for aluminium, other non-ferrous metals and abrasive non-metallic materials where high cutting speed and long tool life are priorities. How does the PCD layer affect performance compared with conventional grades? A PCD cutting layer on a carbide substrate provides superior wear resistance and thermal stability, so the DX140 grade maintains edge sharpness longer and enables higher cutting speeds than standard carbide grades. Is the SPGN120304-DIA compatible with standard ISO toolholders? Yes; the insert follows ISO geometry (square 12 mm, 90° included angle) and is compatible with holders that match the form, relief, tolerance, fastening and thickness specifications for ISO-format inserts. Which chipbreaker should be selected for aluminium turning? The DIA chipbreaker supplied with this insert is designed for aluminium and similar materials, offering controlled chip formation and reliable evacuation under high-speed conditions. What dimensional data are decisive when selecting the right holder? Key dimensions are plate size (12 mm), plate thickness (3.18 mm), corner radius (0.4 mm) and clearance angle (11°); these determine the suitable holder form and clamping arrangement for safe, repeatable use. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SPGN 120304 LX10 Wendeplatten - Tungaloy
Take advantage of the proven combination of ISO compatibility, a balanced LX10 cutting grade and a controlled DIA chipformer for reliable turning performance; order the inserts directly via Metav Werkzeuge or contact their consultants for tailored toolholder guidance. SPGN 120304 LX10 – Tungaloy turning insert (SPGN120304-DIA, square, 12 mm) A SPGN120304-DIA LX10 indexable turning insert engineered for external and internal turning, offering a robust balance of wear resistance and edge stability for consistent production results. Square insert, 12 mm size, 11° relief LX10 Tungaloy grade for wear and toughness DIA chipbreaker for controlled chip formation Compatible with ISO turning toolholders Predictable fit and dependable machining results The insert is built to ISO conventions, so compatibility with a suitable toolholder is defined by form, relief angle, tolerance class, clamping method, size and thickness. This standardisation enables predictable tool set-up and repeatable results in serial turning operations. The square plate geometry with a 90° included angle and a 0.4 mm corner radius gives a stable cutting edge and is particularly useful where robust engagement and simple orientation are priorities. For workshops that value process stability, the standardised format reduces set-up time and minimises surprises during tool changes. Longer tool life and stable cutting with the LX10 grade The Tungaloy LX10 grade combines wear resistance and toughness to complement the insert geometry; the result is improved resistance to flank wear while maintaining a durable cutting edge under varied cutting conditions. The DIA chipbreaker promotes predictable chip formation and evacuation, lowering the risk of re-cutting and improving surface finish consistency. In practical terms, the grade and chipbreaker pairing means fewer indexings and less frequent insert replacement, translating into lower tooling costs per component and reduced downtime in production. Practical application guidance for effective turning Intended for turning operations, the insert is suitable for both external and internal machining when matched to the correct holder and cutting parameters. Key dimensions such as 12 mm seat size, 3.18 mm plate thickness and 11° relief inform feed and depth-of-cut choices; a 0.4 mm corner radius is effective for general-purpose finishing and semi-finishing where a balance between strength and detail is required. The insert is manufactured from cemented carbide, delivering the hardness needed for durable performance across a broad range of workpiece materials. For optimal results, select a chipbreaker and grade that match the material, machining strategy and component stability — this reduces built-up edge and secures consistent surface quality. For a technical consultation tailored to specific turning tasks or to reserve stock of Tungaloy LX10 SPGN120304-DIA inserts, contact Metav Werkzeuge for immediate assistance and practical recommendations Technical data Article number: 6852154 Manufacturer SKU: TUN6852154 SKU: 6852154-Tungaloy Model series: ISO turning inserts Designation: SPGN120304-DIA Brand: Tungaloy Facts Size: 12 mm Thickness: 3.18 mm Relief angle: 11° Corner radius: 0.4 mm Included angle: 90° ISO code: 120304 Special features Material: cemented carbide Grade: LX10 (Tungaloy) Chipbreaker: DIA Plate form: square Hole style: without hole Intended application: turning System components: indexable insert, suitable external holder or boring bar, backer/clamping set and replacement screws FAQ What materials can this insert machine effectively? The SPGN120304-DIA LX10 Tungaloy insert is designed for a broad range of turning tasks; the LX10 grade offers a compromise of wear resistance and toughness suitable for many steels and general workshop materials when paired with the correct chipbreaker and parameters. How does the DIA chipbreaker affect chip control? The DIA chipbreaker on the Tungaloy SPGN120304-DIA promotes short, controllable chips in typical turning conditions, reducing the risk of tangled swarf and improving surface finish consistency. Which toolholders are compatible with this insert? Compatibility is determined by the insert form and dimensions; the square SPGN form and 12 mm size fit ISO-compatible external holders and boring bars engineered for SPGN inserts when matching thickness and clamping style are used. What are the key setup dimensions to check before machining? Confirm 12 mm seat size, 3.18 mm plate thickness, 11° relief and 0.4 mm corner radius during setup; these values govern clearances, feed recommendations and engagement strength for safe, repeatable machining. Is this an original Tungaloy product and where to get more information? The SPGN120304-DIA LX10 is an original Tungaloy turning insert; for detailed application data or to order genuine parts, Metav Werkzeuge can provide technical advice and stock information. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SPGN 120304 LX11 Wendeplatten - Tungaloy
Taking advantage of the SPGN120304-DIA LX11 features — the wear-resistant LX11 grade and the precise 0.4 mm corner radius — delivers consistent turning performance and reliable chip control; order directly via Metav Werkzeuge or consult our specialists for application support. SPGN 120304 LX11 SPGN indexable turning insert (SPGN120304-DIA) — Tungaloy The SPGN120304-DIA LX11 Tungaloy insert is an ISO‑standard square indexable insert designed for external and internal turning, offering a DIA chipbreaker and a balanced combination of wear resistance and edge stability. ISO square insert for turning LX11 grade for wear resistance DIA chipbreaker for controlled chips 0.4 mm corner radius for fine finishes Consistent cutting performance for repetitive turning The insert provides a reliable, repeatable cutting geometry built around the ISO designation and a 90° included angle, which supports stable turning cycles and straightforward toolset standardisation. Its carbide substrate ensures hardness and thermal resistance during interrupted and continuous cuts, while the DIA chipbreaker promotes manageable chip formation. These technical elements reduce process variability and increase first‑pass yield, improving throughput in batch machining and serial production. Grade and edge stability that reduce downtime The LX11 grade, developed by Tungaloy, combines wear resistance with sufficient toughness to maintain edge integrity under typical turning loads. This balance helps to extend tool life and minimise index changes. The moderately sharp 0.4 mm corner radius aids in achieving fine profile details and improved surface finish without sacrificing robustness. Together, the grade and geometry support longer intervals between tool changes and lower total cost of ownership in repetitive turning operations. System compatibility and straightforward integration Designed as an ISO indexable insert, the component fits holders according to form, clearance angle, tolerance class, attachment style, size and thickness. The 11° clearance and 3.18 mm plate thickness are standard parameters for matching carriers and clamping sets, simplifying tool assembly and inventory management. The square shape facilitates multiple indexing positions, and the absence of a clamping hole means compatibility with pocket designs that rely on edge clamping or top clamps. Practical selection guidance for machining applications Select the DIA chipbreaker and LX11 grade when controlled chip flow and sustained edge life are priorities for steel and common alloy turning tasks. The insert suits both external and internal turning; where finer surface quality is required, the 0.4 mm radius helps meet tighter finish targets. For heavily interrupted cuts or highly abrasive materials, verify holder rigidity and cutting parameters to match the insert’s carbide characteristics and ensure stable engagement. Contact Metav Werkzeuge for tailored advice on using the Tungaloy SPGN120304-DIA LX11 indexable insert and for availability — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6807058 Manufacturer SKU: TUN6807058 SKU: 6807058-Tungaloy Model series: ISO-Drehwendeschneidplatten Brand: Tungaloy ISO designation: SPGN120304-DIA Facts Corner radius: 0.4 mm Included angle: 90° Clearance angle: 11° Plate thickness: 3.18 mm Plate size: 12 mm Special features Material: Carbide (Hartmetall) Chipbreaker: DIA Grade: LX11 Shape: Square Hole: none Application: Turning (external and internal) Article name: SPGN120304-DIA LX11 Tungaloy insert FAQ What machining tasks suit this insert best? The SPGN120304-DIA LX11 insert is intended for external and internal turning; its LX11 grade and DIA chipbreaker make it suitable for general turning where controlled chips and durable cutting edges are required. Is the insert compatible with standard ISO toolholders? Yes, the SPGN120304-DIA follows ISO specifications and is compatible with holders matched by form, clearance angle, tolerance class, attachment and size; ensure the carrier accepts a 12 mm square insert with 3.18 mm thickness. How many corners are available for indexing on the square insert? As a square indexable insert, the component provides multiple usable corners; indexing frequency depends on wear and machining conditions rather than the insert geometry alone. Which edge radius should be used for fine surface finishes? The 0.4 mm corner radius on this insert supports finer surface finishes while maintaining edge stability; for extremely fine finishes, complement the radius choice with appropriate cutting parameters and rigidity. Does the insert require a clamping hole? This item is specified as having no hole; it is designed for pockets and clamping systems that secure the insert by its edges or with top clamps. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SPGN 120304 TH10 Wendeplatten - Tungaloy
Benefit from the combination of TH10 uncoated carbide for low cutting forces and the DIA chipbreaker for clean surface finishes; this insert delivers dependable performance for non‑ferrous and finishing turning operations. Order the SPGN120304‑DIA directly via Metav Werkzeuge or ask our consultants for application advice. SPGN120304 TH10 — ISO turning indexable insert by Tungaloy SPGN120304‑DIA TH10 Tungaloy insert for ISO‑standard external and internal turning applications, optimised for non‑ferrous materials and low‑force finishing operations ISO‑standard SPGN120304 format Uncoated carbide grade TH10 for low cutting forces DIA chipbreaker for clean surface finishes 11° relief with 0.4 mm corner radius Consistent compatibility for uninterrupted production The ISO‑standard design ensures exact fitment with compatible holders and boring bars when form, relief, tolerance class, clamping method, size and thickness are matched. As an ISO‑format indexable insert, it forms part of a modular system—insert, external holder or boring bar, shim/clamp set and replacement screws—that simplifies stocking and changeovers. This standardisation reduces set‑up times and supports predictable tool change cycles, which in turn helps maintain throughput and traceable process parameters on the shop floor. Precise geometry for low cutting forces and fine finishes Engineered as an uncoated cemented carbide grade, TH10 promotes low cutting resistance and minimises built‑up edge when machining aluminium, brass and other non‑ferrous alloys. The DIA chipbreaker is tailored to chip control and surface quality, while the 0.4 mm corner radius balances edge strength with the ability to achieve fine finishes. The insert’s 11° relief and 3.18 mm thickness contribute to cutting stability and secure clamping in the seat, and the square 12 mm size provides four indexing positions for economical edge utilisation. Selection guidance to maximise process security and lifespan Choose the insert geometry and chipbreaker according to the workpiece material, machining type and machine/tooling stability: the DIA chipbreaker suits light to medium cuts where surface finish is a priority, and the TH10 grade performs well where an uncoated edge reduces cutting forces. Match the insert to a holder with the correct form and tolerance class to avoid unintended edge loading. Regular inspection of clamping hardware and adherence to recommended cutting data will extend tool life and produce consistent results with this Tungaloy indexable insert. For high‑quality non‑ferrous finishing, request the Tungaloy SPGN120304‑DIA TH10 insert through Metav Werkzeuge or contact our technical consultants at Metav Werkzeuge for tailored cutting data and holder recommendations (info@metav-werkzeuge.com, +49 2822 7131930) Technical data Article number: 6807059 SKU: 6807059-Tungaloy Manufacturer SKU: TUN6807059 Model series: ISO-Drehwendeschneidplatten Designation: SPGN120304-DIA Core data ISO code: 120304 Size: 12 mm Thickness: 3.18 mm Corner radius: 0.4 mm Relief angle: 11° Included angle: 90° Special features Grade: TH10 Material: cemented carbide Coating: uncoated Chipbreaker: DIA Plate shape: square Hole style: without hole Application: Turning System components: insert, external holder/boring bar, shim/clamp set, replacement screws FAQ What materials is this insert best suited for? The SPGN120304‑DIA TH10 insert is optimised for non‑ferrous materials such as aluminium and brass; the uncoated TH10 grade lowers cutting forces and helps prevent built‑up edge. How does the DIA chipbreaker affect machining? The DIA chipbreaker on the SPGN120304‑DIA improves chip control and supports a cleaner surface finish during light to medium cuts. Which holders are compatible with this ISO insert? Compatibility depends on form, clearance angle, tolerance class, clamping method, size and thickness; the insert matches standard ISO SPGN seats when these parameters align. What does the 0.4 mm corner radius mean for finishing? A 0.4 mm corner radius gives a compromise between edge strength and fine surface quality, suitable for semi‑finishing and finishing passes. How many times can the insert be indexed? The square format provides up to four cutting edges before replacement, subject to wear patterns and machining conditions. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SPGN 120308 BX360 Wendeplatten - Tungaloy
The combination of CBN cutting performance and ISO compatibility ensures consistent finishing on hardened components while reducing rework. The robust geometry and 11° relief angle provide stable cutting conditions and longer tool life. Order the SPGN120308 BX360 insert directly via Metav Werkzeuge or consult the technical advisors for application support. SPGN120308 BX360 — ISO turning insert (CBN) for turning, Tungaloy A SPGN120308 BX360 indexable insert designed for precision external and internal turning, optimised for hard turning of hardened steels and, depending on variant, cast iron. SPGN120308 BX360 CBN grade ISO‑standard square insert 12 mm 11° relief angle for stable cutting 0.8 mm corner radius for finish turning Reliable finishing on hardened components The BX360 grade employs cubic boron nitride (CBN) to deliver wear-resistant cutting edges suited to high-hardness finishing. CBN is a superabrasive optimised for machining hardened steels, offering thermal stability and reduced flank wear compared with conventional abrasives. As a result, the insert maintains dimensional accuracy over longer tool life, which supports predictable cycle times and fewer interruptions for tool changes. Seamless integration with ISO toolholders The insert follows the ISO geometry standard, so compatibility with existing holders is determined by matching the form, 11° relief, tolerance class, fastening and thickness. This standardisation simplifies tool setup and reduces inventory complexity: the square insert mounts in common external holders or boring bars, while the system concept—insert, holder, shim/clamp and replacement screws—ensures repeatable clamping and consistent cutting performance. Geometry engineered for surface quality and stability A square plate with a 0.8 mm corner radius produces a durable cutting line for fine finishing without sacrificing edge strength. The 3.18 mm plate thickness adds rigidity against chatter and deflection, supporting stable cutting at light feedrates required for final passes. The combination of 90° insert orientation and the corner radius provides the option of perpendicular cuts with excellent surface finish or inclined approach for more aggressive material engagement. Application scope and practical benefits for workshops Designed primarily for turning, the insert suits both external and internal operations where hardened workpieces require consistent surface integrity. The absence of an integrated chipbreaker means the grade relies on process parameter optimisation and holder geometry for chip control; selecting the appropriate holder and cutting data yields efficient chip evacuation and maximises the BX360 advantage. The overall effect is enhanced throughput, reduced rework and stable tool life in series production. Contact Metav Werkzeuge to request a specification check or to arrange supply of SPGN120308 BX360 inserts; technical consultation and application advice are available via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 6807071 Manufacturer SKU: TUN6807071 SKU: 6807071-Tungaloy Model series: ISO turning inserts Designation: SPGN120308 Facts Corner radius: 0.8 mm Plate size: 12 mm Plate thickness: 3.18 mm Relief (free) angle: 11° Insert angle: 90° Special features Cutting material: cubic boron nitride (CBN), grade BX360 Body material: carbide Plate form: square Chipbreaker: none Hole style: without hole Intended application: turning (external and internal) System components: insert, external holder/boring bar, shim/clamp set, replacement screws FAQ What materials is this insert suitable for? The SPGN120308 BX360 insert (Tungaloy indexable turning insert, SKU 6807071-Tungaloy) is formulated primarily for hardened steels and, depending on the variant, can be applied to certain grades of cast iron for finish operations. How does the BX360 grade improve tool life? The BX360 CBN grade provides high wear resistance and thermal stability; when used with the correct holder and cutting data, the insert sustains edge integrity and extends effective tool life in hard turning cycles. Is this insert compatible with standard ISO holders? Yes. The insert conforms to ISO geometry; compatibility depends on matching the form, relief angle, tolerance class, fastening and thickness to the holder specification. Which cutting parameters are recommended for finishing? For finishing hardened components, low to moderate feeds with light depths of cut are advised; the square geometry and 0.8 mm corner radius favour fine surface quality while the 3.18 mm thickness helps maintain stability. Does the insert include a chipbreaker? This variant is supplied without a chipbreaker; chip control is achieved via holder selection and cutting conditions tailored to the workpiece and machine setup. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SPGN 120308 DX140 Wendeplatten - Tungaloy
Take advantage of the combination of PCD cutting performance, ISO conformity and robust carbide substrate for high‑speed aluminium turning, ensuring longer tool life and predictable cycle times. Order the SPGN120308 directly via Metav Werkzeuge or ask our consultants for a compatibility check. SPGN120308 DX140 Tungaloy indexable insert — PCD for high‑speed aluminium turning, 90° square The SPGN120308 DX140 Tungaloy insert is an ISO‑standard square turning insert engineered for external and internal turning of aluminium and other non‑ferrous materials, offering high cutting speeds and extended tool life. SPGN120308 ISO square insert, 90° included angle PCD grade DX140 for aluminium and non‑ferrous Exceptionally long tool life at high cutting speeds 0.8 mm corner radius, 3.18 mm thickness Maximise productivity with high‑speed PCD performance The combination of polycrystalline diamond (PCD) cutting material and a carbide substrate delivers a step change in machining aluminium and abrasive non‑ferrous materials. The DX140 grade is developed for stable cutting at elevated speeds, which translates into shorter cycle times and reduced abrasive wear. Where conventional carbide grades blunt rapidly, PCD maintains a sharp edge longer, significantly lowering the frequency of insert changes and associated downtime. For batch production and high‑volume turning, this results in a clear economic advantage through increased spindle uptime and improved process reliability. Reliable integration through ISO conformity and precision geometry ISO standardisation of the insert designation guarantees straightforward selection of compatible holders when size, thickness and clamping style match. The square plate geometry with a 90° included angle offers flexibility for both facing and shoulder turning operations, while the 0.8 mm corner radius supports clean edge formation and consistent surface finish on profiles. The 3.18 mm plate thickness provides mechanical stability under moderate to high cutting loads, and the absence of a chipbreaker simplifies chip behaviour considerations when cutting ductile materials such as aluminium alloys. Compatibility depends on form, clearance angle, tolerance class, clamping and size, so confirm holder matching to secure repeatable set‑ups. Reduce total machining cost with longer life and predictable results Adopting a PCD solution such as the DX140 grade reduces total cost per part by extending the period between tool changes and by stabilising surface quality over long runs. Fewer tool interventions reduce handling errors and increase process consistency, which is especially beneficial in serial production and CNC‑based workflows. The insert’s design supports both external and internal turning applications and is suited to operations where high cutting speeds and abrasion resistance are priorities. For workshops seeking to improve throughput and process predictability, this grade offers a pragmatic route to higher productivity without complex rework of machining programs. Contact Metav Werkzeuge for an application review of Tungaloy PCD inserts and a compatibility check for holders; email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss DX140 options and delivery. Technical data Article number: 6807069 SKU: 6807069-Tungaloy Manufacturer SKU: TUN6807069 Series: ISO turning indexable inserts Designation: SPGN120308 Core data Thickness: 3.18 mm Corner radius: 0.8 mm Size: 12 mm Included angle: 90° Relief angle: 11° Special features Cutting material: polycrystalline diamond (PCD), grade DX140 Substrate: carbide Application: turning (external and internal) No chipbreaker Square plate, without hole Optimised for aluminium and other non‑ferrous materials FAQ What materials is this insert suited for? The SPGN120308 DX140 Tungaloy insert is intended primarily for aluminium and other non‑ferrous and abrasive non‑metallic materials, exploiting the abrasion resistance of the PCD cutting material. Can the insert be used for internal as well as external turning? Yes, the ISO square geometry and the 90° included angle allow the insert to be used for both external and internal turning operations when mounted in a suitable holder. How does the DX140 grade affect cutting speed and tool life? The DX140 PCD grade enables higher cutting speeds and extended tool life compared with conventional carbide grades, reducing tool changes and improving overall machining efficiency. Which holders are compatible with this ISO designation? Compatibility with holders depends on form, clearance angle, tolerance class, clamping method, size and thickness; confirm these parameters to ensure proper fit for SPGN120308. What are the key dimensional specifications to check before ordering? Verify thickness (3.18 mm), corner radius (0.8 mm), plate size (12 mm) and included angle (90°) to ensure the insert matches the intended holder and machining task. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com