SPGN 120308 DX160 Wendeplatten - Tungaloy
Benefit from the combination of PCD cutting performance and ISO compatibility for efficient aluminium turning; the DX160 grade and a 0.8 mm corner radius provide high cutting speeds and extended tool life. Order the SPGN 120308 DX160 insert directly via Metav Werkzeuge or consult our specialists for application advice. SPGN 120308 DX160 indexable turning insert by Tungaloy The SPGN120308 DX160 is an ISO-format indexable insert engineered for external and internal turning of aluminium, non-ferrous and abrasive non-metal materials. PCD grade DX160 for high cutting speeds ISO SPGN form 120308, square insert 0.8 mm corner radius for fine finishes Long tool life and abrasion resistance High-speed cutting and longer production runs The PCD cutting layer in grade DX160 delivers exceptionally high hardness and thermal stability, enabling secure cutting at elevated speeds when machining aluminium and other soft non-ferrous alloys. This results in a long tool life and fewer changeovers, which increases machine uptime and lowers unit costs. The polykristalline diamond structure resists abrasive wear, so process windows remain stable over extended runs and repeatability is improved. Precision geometry for consistent surface quality The square ISO geometry with a 0.8 mm corner radius and an included angle of 90° provides reliable edge strength for shoulder and profile turning while supporting fine surface finishes. A relief angle of 11° assures adequate clearance during cutting, reducing rubbing and heat generation. The 3.18 mm plate thickness contributes to mechanical rigidity; as a result, vibration is minimised and part tolerances become easier to hold in production environments. System compatibility that simplifies tool selection Designed as an ISO-standard indexable plate, this insert requires a matching external holder or boring bar, plus a shim/clamping set and replacement screws for proper assembly. Compatibility to the toolholder is determined by form, relief angle, tolerance class, mounting style, size and thickness; selecting the correct holder ensures secure clamping and repeatable positioning. Inserts without a chipbreaker allow adaptation of cutting parameters and holder geometry to suit the workpiece and stability conditions. Material suitability and process benefits The cutting material is optimised for aluminium, non-ferrous metals and abrasive non-metals, offering superior wear resistance compared with conventional carbide tips. For these materials the PCD DX160 grade enables higher feeds and speeds with consistent results, improving overall productivity. Note that PCD is not intended for conventional steels; process planning should reflect the specific workpiece material and machining strategy to fully exploit the insert’s advantages. For application-specific recommendations on the Tungaloy PCD inserts, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitability, availability and any required tooling combinations Technical Data Manufacturer item number: 6807070 SKU: 6807070-Tungaloy Manufacturer SKU: TUN6807070 Brand: Tungaloy Model series: ISO turning indexable inserts Core Data ISO designation: 120308 Plate shape: square Corner radius: 0.8 mm Relief angle: 11° Included angle: 90° Plate thickness: 3.18 mm Plate size: 12 mm Hole: without hole Special features Cutting material: PCD (polycrystalline diamond) Grade/coating: DX160 Substrate material: carbide Application: turning Suitable for: aluminium, non-ferrous metals, abrasive non-metals Chipbreaker: none System: requires matching external holder or boring bar, shim/clamping set and replacement screws FAQ What materials is this insert best suited for? The SPGN 120308 DX160 insert with its PCD cutting layer is best suited for aluminium, non-ferrous metals and abrasive non-metal materials where high cutting speeds and long tool life are required. Is the SPGN 120308 DX160 compatible with standard ISO holders? Compatibility is governed by form, relief angle, tolerance class, mounting, size and thickness; the SPGN 120308 DX160 is an ISO-format plate intended for use with matching external holders or boring bars. What is the corner radius and how does it affect the finish? This insert has a 0.8 mm corner radius, which supports fine surface finishes and provides a balance between edge strength and the ability to produce smooth profiles. Does the insert include a chipbreaker? The SPGN 120308 DX160 is supplied without a chipbreaker, allowing adaptation of cutting parameters and holder geometry to the specific workpiece and machining stability. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SPGN 120308 LX10 Wendeplatten - Tungaloy
Benefit from the combination of LX10 wear resistance and a 0.8 mm corner radius for reliable edge stability and consistent cycle times; order the insert directly via Metav Werkzeuge or contact our consultants for matching holder recommendations. SPGN 120308 LX10 — Turning insert (carbide) by Tungaloy — 0.8 mm radius, 11° relief SPGN120308 LX10 Tungaloy insert is an ISO‑standard square indexable insert for general turning applications, offering a balance of wear resistance and toughness suitable for a wide range of machining tasks. ISO 120308 square insert LX10 grade for wear resistance 0.8 mm corner radius for stable edge 11° relief angle for reliable engagement Longer tool life through geometric stability and material choice The insert is manufactured from carbide and specified in the LX10 grade to combine wear resistance with sufficient toughness for interrupted and continuous cuts. The result is a predictable edge behaviour and longer usable life under typical turning conditions. The 0.8 mm corner radius helps distribute cutting forces over a larger area, reducing edge chipping and improving surface finish on parts where a defined corner form is required. By integrating these properties, the insert supports higher productivity and fewer tool changes, which directly reduces machine downtime and boosts throughput in batch and single‑piece production. Consistent setup and compatibility to reduce downtime Designed as an ISO format insert (120308), compatibility with holders depends on form, relief angle, tolerance class, clamping style, size and thickness; using a correctly matched square insert holder ensures secure clamping and repeatable positioning. The insert’s 11° relief angle and the standard thickness of 3.18 mm permit straightforward mounting in common external holders and boring bars, making tool changeover fast and predictable. A simple, repeatable setup improves process stability and makes it easier to implement standardised cutting parameters across machines and shifts. Practical advantages in machining performance For turning tasks that demand a balance between tool life and edge integrity, the combination of LX10 grade and a medium corner radius delivers reliable performance across steels, castings and various alloyed materials when operated within recommended cutting data. The absence of a chipbreaker on this variant directs selection towards applications where either the machine’s coolant flow or fixture arrangement controls chip evacuation, or where manual chip management is preferred. Where chip control is essential, pairing this insert with a compatible geometry or holder that features chip deflection is recommended. How to choose this insert for production needs Select this insert when process consistency, straightforward indexing and a robust cutting edge are priorities. Its square form provides four usable cutting edges per index, offering economical edge utilisation in repetitive turning operations. When softer, gummy materials are in use or very fine surface finish is required, consider matching the LX10 grade with adjusted speeds and feeds to exploit its wear resistance while avoiding built‑up edge. For heavy interrupted cuts, the insert’s carbide composition and geometry support stable cutting, provided the machine and clamping system deliver the required rigidity. Contact Metav Werkzeuge for tailored holder and parameter advice to integrate the SPGN120308 LX10 insert into production setups and to secure optimal cutting data for material and machine combinations Technical data Article number: 6852170 Manufacturer SKU: TUN6852170 SKU: 6852170-Tungaloy Model series: ISO-turning inserts Grade: LX10 Numbers / Core technical data Corner radius: 0.8 mm Relief angle: 11° Thickness: 3.18 mm Plate size: 12 mm Included angle: 90° ISO designation: 120308 Designs / Special features Material: carbide Plate form: square Hole style: without hole Chipbreaker: none Intended use: turning System components: insert, matched external holder or boring bar, clamp set and replacement screws Compatibility factors: form, relief angle, tolerance class, clamping, size and thickness FAQ What materials is this insert suitable for? The SPGN120308 LX10 Tungaloy insert is specified for general turning and performs well on a broad range of materials when cutting data are matched to the workpiece and rigidity of the setup. How many cutting edges does the insert provide? As a square indexable insert, the SPGN120308 LX10 offers four usable cutting edges per index, improving economy in high‑volume turning operations. Is a chipbreaker included with this variant? This particular insert is supplied without a chipbreaker; chip control is achieved via holder geometry, cutting parameters, and coolant strategy when necessary. How does the 0.8 mm radius affect surface finish? The 0.8 mm corner radius provides a compromise between strength and form definition: it stabilises the cutting edge and often improves finish compared with very small radii, while still allowing controlled profile generation. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
SPGN 120308 LX11 Wendeplatten - Tungaloy
Take advantage of a compact, ISO‑compliant turning solution that pairs carbide durability with a balanced corner radius for reliable edge stability and predictable wear behaviour; order directly via Metav Werkzeuge or consult the Metav team for application advice. SPGN 120308 LX11 turning insert by Tungaloy — ISO turning insert, square form, LX11 grade SPGN120308 LX11 Tungaloy insert designed for ISO‑standard turning tasks; intended for external and internal turning where a robust carbide grade and stable cutting edge improve productivity ISO‑compliant SPGN geometry LX11 grade for improved wear resistance Square insert, 12 mm size 11° clearance angle for reliable cutting Precision and holder compatibility for dependable turning The indexable insert follows the ISO‑standard SPGN form, which simplifies selection and ensures fit with compatible holders. Thanks to clear specifications for form, 11° clearance angle and tolerance class, the insert mates predictably with a matching external holder or boring bar. For production environments this compatibility reduces setup time and helps maintain consistent part quality across batches. Material grade and edge stability that extend tool life Made from high‑performance carbide and specified as grade LX11, the cutting grade balances wear resistance and toughness to resist chipping on interrupted cuts. The specified 0.8 mm corner radius contributes to edge stability and distributes cutting forces, which reduces flank wear in routine turning operations and supports longer service intervals before index changes. Design features that support process reliability The square 3.18 mm thick insert in a 12 mm size delivers multiple effective cutting edges per index, promoting economical usage and quick edge changes. The insert is supplied without hole and without chipbreaker, so it is suited to setups where the holder provides clamping and chip control is managed by cutting parameters or additional tooling. This geometry is particularly effective for general turning tasks that prioritise consistent dimensional accuracy. Typical uses and selecting the correct set‑up Intended for turning, the insert is suited to both external and internal operations when matched with the correct holder, shim and clamping set. Choose the LX11 grade and the corner radius according to workpiece material and desired surface finish: a larger radius for higher stability and a small radius for fine finishing passes. The system approach—insert plus holder, shim and clamping screws—ensures replacement components are straightforward to source and fit. Discuss the Tungaloy LX11 inserts with Metav Werkzeuge for an application‑specific recommendation and swift supply via Metav Werkzeuge; technical assistance is available by email or phone. Technical data Article number: 6807064 Manufacturer SKU: TUN6807064 SKU: 6807064-Tungaloy Designation: SPGN120308 Manufacturer article number: 6807064 Facts Size: 12 mm Thickness: 3.18 mm Corner radius: 0.8 mm Clearance angle: 11° Included angle: 90° Special features Material: carbide Grade: LX11 (Tungaloy) ISO series: ISO turning inserts Shape: square Chipbreaker: without Hole: without hole Intended application: turning System components: insert, holder, shim/clamping set, spare screws FAQ What materials is this insert suitable for? The SPGN120308 LX11 insert is formulated for general turning and the LX11 grade provides a balance of wear resistance and toughness suitable across a broad range of materials; select grade and geometry to match specific workpiece alloys. How does the square form affect cutting strategy? A square form offers multiple cutting edges per index and good stability; the SPGN geometry with a 0.8 mm corner radius supports heavier cuts while allowing several re‑indexes for economical use. Is a chipbreaker included with the insert? This insert is supplied without a chipbreaker; chip control is achieved via holder selection and cutting parameters or by using a holder with integrated chip control. What holder does the insert require? Compatibility depends on the SPGN form, clearance angle, tolerance and thickness; pair the insert with an ISO‑compliant external holder or boring bar sized for SPGN120308 geometry. How many indexes does the insert provide before replacement? The square SPGN insert provides multiple cutting edges per index; the exact number of productive indexes depends on cutting conditions and workpiece material, with LX11 designed to extend edge life under typical turning loads. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SPGN 120308 TH10 Wendeplatten - Tungaloy
Robust machining performance from a sharp, uncoated TH10 grade combined with ISO conformity and precise geometry ensures low cutting forces and clean surface finishes; order directly via Metav Werkzeuge or consult the advisers for application support. SPGN120308 TH10 SPGN Turning insert — Tungaloy The SPGN120308 TH10 is an ISO‑compliant square turning insert for external and internal turning, optimised for low cutting forces and clean finishes on non‑ferrous materials ISO‑compliant square insert 12 mm Uncoated carbide Grade TH10 Sharp edge for low cutting forces Suitable for external and internal turning Precision and reliability for consistent turning results The SPGN120308 TH10 insert delivers consistent, measurable results through an ISO‑compliant geometry and a sharp uncoated carbide cutting edge. The combination of a 0.8 mm corner radius and an included angle of 90° provides a stable cutting line that reduces chatter and helps maintain tolerances in serial production. Compatibility with clamping systems is determined by form, relief angle 11°, tolerance class, fixation method, size and thickness; understanding these parameters reduces setup time and improves reproducibility. For workshop planners and production engineers, the controlled geometry translates into predictable tool life and fewer rework cycles. Practical benefits for machinists and process planners Designed for practical use in turning applications, the insert’s Grade TH10 is a sharp universal grade that supports machining of non‑ferrous materials while keeping cutting forces low. The 3.18 mm thickness and square form ensure secure clamping in standard ISO toolholders, while the absence of a chipbreaker simplifies operations where chip form is managed by cutting conditions. Lower cutting forces contribute to improved surface quality and reduced power draw on smaller lathes, making the insert a cost‑efficient choice for both single‑part work and batch production. Process engineers will appreciate the clear link between edge geometry and achievable surface finish. Material suitability and application guidance The uncoated carbide substrate of this insert is optimised for applications where a sharp edge and clean surface are priorities. Typical uses include external and internal turning of non‑ferrous workpieces where coating is unnecessary or may impede the required edge sharpness. The square plate format with 12 mm size supports a range of feed and depth‑of‑cut settings; selecting the correct corner radius and the matching holder stability ensures the best balance between tool life and surface integrity. When selecting a holder, confirm compatibility by matching form, clearance angle and tolerance class to the insert’s specifications to achieve secure clamping and reliable machining. For application-specific recommendations or to place an order for Tungaloy inserts, contact Metav Werkzeuge for tailored advice and availability—email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Manufacturer article number: 6807067 Manufacturer SKU: TUN6807067 SKU: 6807067-Tungaloy Model series: ISO-Drehwendeschneidplatten Label: SPGN120308 TH10 Tungaloy-Wendeplatte Dimensions & core data Size: 12 mm Thickness: 3.18 mm Corner radius: 0.8 mm Relief angle: 11° Included angle: 90° ISO designation: 120308 Materials & special features Material: carbide Grade: TH10 Coating: uncoated Chipbreaker: none Hole: none Plate form: square Application: Turning Typical application: external and internal turning FAQ What holders are compatible with this insert? Compatibility depends on holder form, clearance angle, tolerance class, fixation and size; the SPGN120308 TH10 fits ISO‑compliant square holders designed for a 12 mm plate. Which materials is this insert best suited for? The insert’s sharp uncoated carbide TH10 grade is optimised for non‑ferrous materials and applications that benefit from low cutting forces and clean surfaces. Does the insert include a chipbreaker or mounting hole? This insert is supplied without a chipbreaker and without a hole, as indicated for SPGN120308 TH10. How does the corner radius affect machining? The 0.8 mm corner radius improves edge strength and surface finish for moderate feeds while keeping cutting forces manageable for precise turning operations. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SPGN 120312 BX360 QBN Wendeplatten - Tungaloy
Data conflict detected: the product is listed as intended for turning, while the model series and description consistently indicate a high‑feed milling family for pocket and face milling with a CBN grade for hardened steels, which suggests a mismatch in the categorisation of the tool's intended application; these entries are inconsistent and could lead to confusion or errors in usage, so it is essential to carefully verify the source data, cross-checking all relevant specifications and ensuring alignment between the intended purpose, the technical details provided, and the product's actual capabilities before a full product description is created to avoid potential misrepresentation or operational issues.
SPGN 120312 FX105 Wendeplatten - Tungaloy
Product data inconsistent: the entry lists the application as "turning" while the model series and product description specify a high‑feed milling family and the cutting grade information conflicts with the series—please review and correct the product data to ensure accuracy and consistency across all fields, as discrepancies like these can lead to confusion, misinterpretation, and potential errors in application or usage, which may ultimately affect performance, customer satisfaction, and operational efficiency; it is crucial to verify whether the application type aligns with the intended purpose of the model series and to confirm that the cutting grade details are accurate and correspond to the specified product family.
SPGN 120312 LX10 Wendeplatten - Tungaloy
Data inconsistency detected: the item is described both as a high‑feed milling insert and as intended for turning, which creates confusion and makes it difficult to determine the correct application or usage of the product. Please provide corrected product data, including accurate details about whether the item is specifically designed for high-feed milling operations, turning processes, or if it is a versatile tool capable of performing both functions, so a reliable and precise product description can be generated to ensure clarity for potential users and to avoid any misunderstandings or errors in its intended application or marketing.
SPGN 120312 LX11 Wendeplatten - Tungaloy
Take advantage of the combination of Tungaloy LX11 carbide performance, a QBN chipbreaker for reliable chip control and a 1.2 mm corner radius for consistent turning profiles — order directly via Metav Werkzeuge or consult our team for application guidance. SPGN120312 LX11 SPGN — Tungaloy indexable insert for Turning SPGN120312-QBN LX11 Tungaloy indexable insert designed as a square 90° insert for general turning applications, offering stability and edge life in moderate to demanding machining tasks Tungaloy LX11 carbide grade for edge stability QBN chipbreaker for improved chip control 1.2 mm corner radius for repeatable profiles Square 12 mm size, 90° cutting angle High productivity through geometry and chip control The square insert’s QBN chipbreaker is engineered to maintain stable chip formation under interrupted cuts and varying feed rates. This geometry reduces the risk of built-up edge and supports consistent surface quality during series production. By combining a controlled chip path with a 1.2 mm corner radius, the insert ensures dimensional reliability and reduces rework. For process planners, this translates into fewer tool changes and improved cycle-time predictability, which supports leaner throughput and lower per-piece machining costs. Carbide grade focused on balance between wear resistance and toughness The LX11 grade from Tungaloy brings a considered compromise between wear resistance and fracture toughness. The substrate material is carbide, selected to withstand abrasive wear while retaining sufficient edge strength for transient loads. In practice, this means longer intervals between indexings and fewer scrapped parts from unexpected edge chipping. The technical composition of the grade suits operations where sustained surface finish and reproducible tool life are decisive selection criteria. Robust form and dimensions for versatile turning use The insert is square with a 90° cutting angle, a 12 mm size and a 3.18 mm plate thickness, offering mechanical stability in typical turning toolholders. The absence of a centre hole simplifies mounting in specific proprietary clamping systems and reduces potential stress concentrators. These dimensional features combine to deliver a stiff cutting edge: beneficial in both roughing passes that remove larger volumes and in finishing passes that demand repeatable form accuracy. System compatibility and handling benefits Packed as part of a modular system that includes the indexable insert, the matching insert pocket and fastening screws, this component integrates into common toolholders for turning operations. The square form and standard 120312 ISO designation make it straightforward to identify replacements and to plan inventory. Careful handling and correct torque when seating the insert ensure consistent contact and heat dissipation in the cutter body, contributing to longer, more predictable tool life. For tailored technical advice and availability of the Tungaloy SPGN120312-QBN LX11 turning inserts, contact Metav Werkzeuge for prompt consultation by email at info@metav-werkzeuge.com or by phone at +49 2822 7131930 — our specialists will recommend the best clamping and process parameters for the application. Technical data Article number: 6807072 Specifications Manufacturer SKU: TUN6807072 SKU: 6807072-Tungaloy Material: Carbide Grade: LX11 Application: Turning Features ISO designation: 120312 Shape: Square Size: 12 mm Plate thickness: 3.18 mm Corner radius: 1.2 mm Relief angle: 11° Cutting angle: 90° Chipbreaker: QBN Hole: without hole Model series: DoFeed FAQ What does the designation SPGN120312-QBN mean for tool selection? The designation identifies a square indexable insert with the ISO code 120312, a QBN chipbreaker and the geometry suited for standard turning fixtures, helping to match the correct insert to the holder. Which materials are best suited for this insert grade? The LX11 Tungaloy grade and carbide substrate are selected to balance wear resistance and toughness, making the insert suitable for a wide range of steels and industrial turning tasks where edge stability is required. How does the 1.2 mm corner radius affect machining results? A 1.2 mm corner radius provides a robust cutting edge that reduces the risk of edge chipping and supports consistent profile accuracy, especially useful in semi-finishing and general-purpose turning. Is this insert compatible with standard square turning holders? Yes, the square form and the 120312 ISO designation make the insert compatible with common square insert toolholders designed for 90° cutting geometries. Are there recommended handling or seating practices for best performance? Correct seating with the manufacturer-recommended torque and clean contact faces are essential; consistent clamping ensures reliable heat transfer and repeatable cutting-edge positioning for prolonged tool life. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SPGN 120312 NS9530 Wendeplatten - Tungaloy
Conflicting product data detected: the application field states "Drehen" (turning) while the model series and description indicate high‑feed milling; this inconsistency suggests a mismatch in the provided information, making it difficult to determine the correct application or intended use of the product, and as a result, a consistent product description cannot be generated without further clarification or additional data to resolve the discrepancy and ensure accuracy in the representation of the product's capabilities and intended purpose.
SPGN 120408 TH10 Wendeplatten - Tungaloy
Take advantage of a sharp, uncoated cemented carbide grade that supports low cutting forces and a clean surface finish, combined with an ISO-standard square geometry and precise 0.8 mm corner radius for reproducible turning results; order the insert directly via Metav Werkzeuge or ask our consultants if needed. SPGN120408 TH10 indexable turning insert for turning — Tungaloy The SPGN120408 TH10 is an ISO-standard indexable turning insert engineered for both external and internal turning, offering a sharp universal grade for non-ferrous materials and applications requiring low cutting forces. ISO-standard square insert 90° geometry Uncoated cemented carbide, TH10 universal grade 0.8 mm corner radius for fine edge definition Compatible with ISO holders; 11° clearance angle Reliable edge control for consistent turning performance The SPGN120408 family delivers a reproducible cutting edge thanks to its square form and precise tolerances. As an ISO-standard component, the insert ensures predictable seating and repeatable clamping, which reduces set-up time and variability in serial production. The 90° geometry provides stability in radial cuts, while the 0.8 mm corner radius balances edge strength with the ability to produce accurate profiles and fine surface finishes. For workshops seeking consistent cycle times and reduced rework, this geometry supports steady process results. Material behaviour and why an uncoated grade can be advantageous The TH10 grade is an uncoated cemented carbide designed as a sharp, universal option for non-ferrous workpieces and operations where a low-friction, clean cutting edge is required. In such applications the absence of a coating reduces built-up edge tendency and assists in achieving a clean surface finish with lower cutting forces. That behaviour is particularly beneficial when machining aluminium alloys or soft copper-based materials, where shearing rather than ploughing preserves dimensional accuracy and component appearance. System compatibility and practical mounting considerations Compatibility with holders is determined by the insert’s shape, clearance angle, tolerance class, fastening method, size and thickness. The insert is supplied in a square form and fits standard ISO external holders or appropriate boring bars when the clamping geometry matches the plate dimensions and 4.76 mm thickness. A complete system comprises the ISO insert, a matched external holder or boring bar, a shim/clamp set and replacement screws; correct combination of these elements secures cutting stability and tool life under varying cutting conditions. Selection tips and operational benefits for production use Choosing an insert without a chipbreaker focuses process control on tooling geometry and cutting parameters. The absence of a built-in chipformer here means selecting appropriate feed and speed values and a compatible coolant or chip evacuation strategy. For tasks that prioritise low cutting forces and surface quality, the TH10 grade enables efficient material removal with predictable edge wear. The result is a balance of operational economy and surface integrity that supports high productivity in batch and single-piece production. For reliable, low-force turning with Tungaloy's TH10 grade, contact Metav Werkzeuge for availability and application advice at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6807081 Manufacturer SKU: TUN6807081 Insert designation: SPGN120408 Brand: Tungaloy Core specifications Size: 12 mm Thickness: 4.76 mm Corner radius: 0.8 mm Clearance angle: 11° Geometry angle: 90° Features and compatibility Material: Cemented carbide (uncoated) Grade: TH10 (sharp universal for non-ferrous) Shape: Square form Chipbreaker: none Hole: without hole Series: ISO indexable turning inserts Application: Turning Compatibility determined by form, clearance angle, tolerance class, fastening, size and thickness FAQ What materials is this insert best suited for? The SPGN120408 TH10 is best suited for non-ferrous materials and similar applications where its uncoated cemented carbide grade supports low cutting forces and a clean surface finish. Can this insert be used for both external and internal turning? Yes, the ISO-standard square geometry and 90° angle make the insert suitable for both external and internal turning when paired with an appropriate holder. Does the insert include a chipbreaker? No, this insert is supplied without a chipbreaker, which allows process control via cutting parameters and holder selection for effective chip evacuation. How does the 0.8 mm corner radius affect machining? The 0.8 mm corner radius offers a compromise between edge strength and profile accuracy, improving surface finish while maintaining adequate edge resistance for common turning operations. What determines compatibility with a tool holder? Compatibility depends on the insert’s form, clearance angle, tolerance class, fastening method, size and thickness; matching these to the holder ensures secure clamping and stable machining. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SPGN 120412 FX105 Wendeplatten - Tungaloy
Combines high wear resistance from the FX105 grade with edge stability provided by the 1.2 mm corner radius, plus precise dimensional conformity for use in Tungaloy milling systems — order the SPGN120412 FX105 insert via Metav Werkzeuge or contact their consultants for selection support. SPGN120412 FX105 — Square milling insert (12 mm) by Tungaloy SPGN120412 FX105 is a square indexable insert for milling, designed for robust general milling tasks within Tungaloy milling systems and compatible tool families FX105 grade for wear resistance Square 12 mm insert, 90° cutting angle 1.2 mm corner radius for edge stability Carbide construction for extended life Consistent performance through material and geometry The insert is manufactured in a Tungaloy FX105 grade on a carbide substrate to deliver predictable wear resistance and stable cutting behaviour. The combination of material and edge preparation reduces the frequency of insert changes and supports higher uptime in production. The 1.2 mm corner radius contributes to a robust cutting edge that tolerates interruptions and variable engagement conditions, translating into longer tool life and lower overall tooling cost per component. Versatility across common milling tasks As a square 12 mm insert with a 90° cutting angle and a 4.76 mm thickness, the geometry suits face, shoulder, slot, high-feed and contour milling depending on the assigned tool family. The 11° clearance angle helps control cutting forces and chip flow for many workpiece materials. For operators new to insert geometry: a larger corner radius increases edge strength but may round internal corners slightly; it is therefore a practical compromise between finish quality and wear resistance. Reliable system fit and straightforward clamping This insert is intended for use in matching Tungaloy bodies where seat, geometry and clamping are specified to work together; the system typically includes a clamping screw and, where required, a shim or support. The indexable insert is supplied without chipbreaker and without hole, which corresponds to clamping styles that rely on top-seat stability and an external clamping screw. Correct pairing of insert and cutter body ensures secure mounting and repeatable positioning, contributing to stable machining and consistent component quality. Contact Metav Werkzeuge today for a tailored recommendation based on application specifics and to request the SPGN120412 FX105 insert — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: 6807085-Tungaloy Manufacturer article number: 6807085 Manufacturer SKU: TUN6807085 Name: SPGN120412 FX105 Tungaloy insert Core data Size: 12 mm Thickness: 4.76 mm Corner radius: 1.2 mm Cutting angle: 90° Clearance angle: 11° Special features Material: carbide Grade: FX105 (Tungaloy) Shape: square Chipbreaker: without Hole: without hole Series: Fräswendeschneidplatten Application: Milling Compatible with Tungaloy milling systems FAQ What machining tasks is this insert suited for? The SPGN120412 FX105 insert is intended for face, shoulder, slot, high-feed and contour milling when used in the corresponding Tungaloy milling bodies. Which materials can be machined with this grade? The FX105 grade on a carbide substrate provides a balanced combination of wear resistance and toughness suitable for a broad range of steels and general milling applications; final selection should match the workpiece material and cutting parameters. How does the 1.2 mm corner radius affect results? A 1.2 mm corner radius increases edge strength and wear life; it helps with interrupted cuts and load variations while producing slightly larger internal corner radii on the workpiece. Is a chipbreaker included on the insert? No, this indexable insert is supplied without chipbreaker, so chip control depends on the chosen tool geometry, cutting conditions and workpiece material. How should the insert be mounted in the cutter body? The insert requires a matching seat and clamping arrangement in the Tungaloy cutter body; the system normally uses a clamping screw and, where applicable, a shim to ensure correct seating and repeatable positioning. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SPGN 120412 T1115 Wendeplatten - Tungaloy
Benefit from the T1115 wear resistance and a precise 90° square geometry for consistent milling performance; the combination of robust carbide substrate and a 1.2 mm corner radius ensures reliable edge stability and long tool life. Order the SPGN120412 T1115 indexable insert via Metav Werkzeuge or request consultancy for system matching and supply details. SPGN120412 T1115 indexable insert for milling — Tungaloy A SPGN120412 T1115 indexable insert intended for milling tasks in compatible Tungaloy milling systems, offering a square 90° geometry and a 1.2 mm corner radius for shoulder, face and contour operations T1115 grade for balanced wear and toughness Square 90° form for shoulder and face milling 1.2 mm corner radius for precise edge strength Carbide substrate, 4.76 mm thickness, no hole Precise cutting performance for demanding milling tasks The SPGN120412 design pairs a carbide substrate with the T1115 grade to deliver a balance of wear resistance and toughness that suits varied milling strategies. The square 90° geometry provides stable seating and predictable cutting engagement, while the rounded 1.2 mm corner reduces microchipping and improves edge life. Where high surface quality and repeatable dimensions are required, this insert delivers controlled chip formation and consistent cutting forces, supporting enhanced process stability and fewer tool changes. System compatibility and application range for efficient setup Engineered for integration with Tungaloy milling systems, the insert requires matching plate seat, geometry and cutter body to guarantee secure clamping and correct rake/relief relationships. Typical applications include face milling, shoulder milling, slotting, high-feed operations and contouring, depending on the parent cutter family. The square shape and 90° approach angle make the component especially suitable for operations that demand true shoulders and flat surfaces, while the absence of a central hole simplifies mounting in screw-clamped pockets designed for this format. Process reliability, economy and handling advantages Optimised for productive machining, the combination of substrate and grade promotes longer tool life and reduced spool and downtime, improving overall cost-efficiency in batch or continuous production. The moderate thickness of 4.76 mm provides sufficient rigidity for interrupted cuts while keeping insert mass low for dynamic balance. For workshops seeking to standardise on inserts that cover a broad range of steels and general-purpose milling tasks, this geometry and grade offer a pragmatic compromise between performance and application breadth. Technical enquiries and compatibility checks can be directed to Metav Werkzeuge for precise recommendations and stock status. For reliable milling results with the Tungaloy T1115 grade, contact Metav Werkzeuge for availability and technical advice at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Manufacturer article number: 6863797 SKU: 6863797-Tungaloy Model series: Fräswendeschneidplatten Material: carbide Core figures Corner radius: 1.2 mm Insert size: 12 mm Thickness: 4.76 mm Relief angle: 11° Cutting angle: 90° Design and features Square plate form No hole (ohne Loch) Grade: T1115 (Tungaloy) Chipbreaker: none Intended application: milling FAQ What milling operations suit this insert best? The SPGN120412 T1115 indexable insert is suitable for face, shoulder, slot, high-feed and contour milling depending on the cutter family to which it is mounted. Which material does the grade T1115 target? The T1115 grade is formulated to provide a balance of wear resistance and toughness for general milling tasks across a wide range of materials commonly encountered in machining. How does the 1.2 mm corner radius affect performance? A 1.2 mm corner radius increases edge strength and reduces chipping risk, improving surface finish and extending the effective life of the insert under typical milling loads. Is the insert compatible with other brands' milling bodies? Compatibility requires matching the plate seat, geometry and clamping method; the SPGN120412 format is intended for Tungaloy milling systems but can be used in bodies that accept the same seat and form. What is the product SKU for ordering and reference? Order reference: SKU 6863797-Tungaloy; manufacturer article number 6863797 Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SPGR 090304 NS9530 Wendeplatten - Tungaloy
Take advantage of the combination of a sharp cermet grade, geometric stability and compatibility with multidirectional turning systems for reliable finishing on steel components. Order original Tungaloy inserts via Metav Werkzeuge or consult the technical team for application-specific recommendations. SPGR 090304 NS9530 Turning insert — Tungaloy The SPGR090304 NS9530 is a square indexable insert engineered for multidirectional turning, optimised for finishing cuts and continuous machining of steel. Sharp cermet grade NS9530 for superior surface finish Square 09 format with 0.4 mm corner radius Single-sided chipbreaker for continuous cuts 11° clearance angle and 3.18 mm thickness Precise finishing with a cermet edge for steel The core advantage of the insert lies in the NS9530 composition: an uncoated cermet designed specifically for finishing operations on steel. The combination of a sharp cutting edge and the cermet microstructure reduces friction and produces a consistently high surface finish, while lowering cutting forces. This makes the component particularly suited to operations where small depth of cut and continuous chips are required. For process planners, the reduced cutting force translates into less vibration and more predictable dimensional control during longitudinal, facing and profiling operations. Multidirectional turning system compatibility for fewer tool changes This insert is intended for use in the AddMultiTurn model series, a multidirectional turning system that integrates holder, indexable inserts and clamping. The system design enables several machining directions with a single tool body, cutting down on changeovers and set-up time. As a result, production workflows benefit from increased uptime and improved throughput without compromising finish quality. The insert’s geometry supports reliable clamping and repeatable indexation within the system. Geometry engineered for repeatable accuracy The insert’s square 09 format with a 0.4 mm corner radius provides a blend of edge strength and fine finishing capability. With a thickness of 3.18 mm and an 11° relief angle, the geometry supports stability under light finishing passes while maintaining the sharpness needed for low cutting forces. The single-sided chipbreaker is configured for continuous chips and small feed conditions, improving chip control and helping to maintain uninterrupted cutting performance. These features contribute to consistent part-to-part surface quality and predictable tool life. Application guidance and operational benefits Optimised for turning tasks such as longitudinal turning, facing and profiling, this insert is particularly effective where a fine surface and tight tolerances are priorities. The uncoated cermet grade favours continuous-cut conditions and small depths of cut; the insert’s design supports steady chip formation and stable cutting forces. For production environments seeking predictable finishing, the insert offers a cost-effective balance of performance and tool life while simplifying insert selection within the AddMultiTurn system. For further machining parameters or setup recommendations, technical consultation is available to match the insert to the specific machine and material combination. Contact Metav Werkzeuge for tailored advice on Tungaloy finishing inserts and fast availability through Metav Werkzeuge’s technical sales team Technical data Article number: 6997946 SKU: 6997946-Tungaloy Manufacturer article number: 6997946 Manufacturer: Tungaloy Facts Corner radius: 0.4 mm Thickness: 3.18 mm Relief angle: 11° Insert angle: 90° Size: 09 ISO designation: 090304 Special features Material: carbide Grade: NS9530 (uncoated cermet) Chipbreaker: single-sided Hole: without hole Shape: square Application: turning System series: AddMultiTurn FAQ What machining tasks suit this insert best? The SPGR090304 NS9530 insert from Tungaloy is optimised for finishing operations in turning, including longitudinal turning, facing and profiling on steel, where continuous cuts and fine surface quality are required. Is the insert suitable for interrupted cuts? The NS9530 cermet grade and the square geometry are primarily designed for continuous cutting and small depths; interrupted cuts are not the intended primary application for this insert. How does the single-sided chipbreaker affect chip control? The single-sided chipbreaker on the SPGR090304 promotes consistent chip formation under continuous-cut conditions, improving evacuation and reducing the risk of chip entanglement during finishing passes. Can this insert be used in the AddMultiTurn system without adapter changes? The insert is part of the AddMultiTurn series and is dimensioned for integration into the corresponding holders and clamping systems; verification of holder compatibility is advised before mounting. What material grade is recommended for steel finishing? Tungaloy’s NS9530 is an uncoated cermet grade formulated for steel finishing, offering a sharp edge, low cutting forces and improved surface quality. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SPGT 090302 NS9530 Wendeplatten - Tungaloy
Take advantage of the combination of a sharp cermet cutting edge, precise chip control and ISO compatibility for reliable finishing performance; order directly via Metav Werkzeuge or consult the technical team for application matching. SPGT090302 NS9530 SPGT — Turning insert for finishing by Tungaloy The SPGT090302L-W15 NS9530 is an ISO-standard turning insert designed for finishing operations on steel, offering a sharp cutting edge, low cutting forces and consistent surface quality. SPGT090302L-W15 for precision finishing NS9530 uncoated cermet grade 11° relief angle for stable cutting 0.2 mm corner radius for fine finishes Precision finishing with cermet technology The uncoated cermet grade NS9530 provides a consistently sharp cutting edge that reduces cutting forces and improves surface finish in finishing applications. Cermet combines ceramic hardness with a metallic binder to maintain edge integrity under continuous cutting; this results in lower friction, reduced burr formation and improved dimensional consistency. The main benefit is a higher-quality workpiece surface with fewer secondary operations, which supports efficient production workflows and predictable part quality. Stable chip control for continuous finishing passes Equipped with the W15 chipbreaker, the insert promotes short, controllable chips during continuous cuts and small depths of cut, which helps avoid entanglement and tool marks. Controlled chip formation reduces the risk of workpiece damage and tool interference, contributing directly to cycle-time stability and operator safety. The chipbreaker geometry is particularly suited to applications where uninterrupted cutting and repeatable surface integrity are priorities. ISO compatibility and straightforward toolholder matching The insert is ISO-standardised, so holder compatibility depends on form, relief angle, tolerance class, fastening method, size and thickness. The standard designation ensures interchangeability within ISO turning systems and simplifies inventory management. The plate features a cylindrical hole with a single-sided countersink (40°–60°) for secure clamping, and the square format delivers four usable cutting edges. These attributes make the insert easy to integrate into existing tooling setups and minimise set-up time. Practical handling and selection guidance Key dimensions such as the 0.2 mm corner radius, 11° relief angle and 3.18 mm plate thickness balance edge strength and fineness of finish. The square plate format (size 09) gives multiple indexable edges, improving economy per insert in precision turning tasks. For finishing steel with small depths of cut and continuous feeds, the grade NS9530 is optimised to deliver low cutting forces and high surface quality. The insert SPGT090302L-W15 is therefore a practical choice where surface finish and process stability are decisive. Contact Metav Werkzeuge for application-specific advice on the Tungaloy finishing insert and to arrange technical matching or procurement: info@metav-werkzeuge.com • +49 2822 7131930 Technical data Article number: 6997938 SKU: 6997938-Tungaloy Manufacturer SKU: TUN6997938 Model series: ISO-Drehwendeschneidplatten ISO designation: SPGT090302L-W15 Manufacturer: Tungaloy Numbers / Core technical data Corner radius: 0.2 mm Plate thickness: 3.18 mm Relief angle: 11° Plate size: 09 Main angle: 90° Countersink angle: 40°–60° Designs / Special features Material: carbide Grade: NS9530 (uncoated cermet) Chipbreaker: W15 Plate form: square Hole: cylindrical hole with single-sided countersink Application: finishing for steel; suitable for continuous cuts and small depths of cut FAQ What materials is this insert suited for? The SPGT090302L-W15 NS9530 insert is optimised for finishing steel, offering low cutting forces and superior surface quality in continuous cutting conditions. Can this insert be used for both external and internal turning? Yes, the insert is designed for both external and internal turning; selection of holder and geometry should follow the ISO specification to ensure correct mounting. How does the W15 chipbreaker affect performance? The W15 chipbreaker ensures short, controlled chips in finishing operations, which improves surface finish and reduces the likelihood of chip-related interruptions. What should be checked for holder compatibility? Holder compatibility depends on the insert form, relief angle, tolerance class, fastening type, size and plate thickness; the ISO designation aids correct matching. How many usable edges does the square insert provide? The square format normally provides four indexable cutting edges, improving economy per insert when rotating edges. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SPGT 090304 NS9530 Wendeplatten - Tungaloy
The product data contains inconsistent information about the cutting material: one entry specifies cemented carbide while another specifies an uncoated cermet. This discrepancy could lead to confusion or errors in the manufacturing process, as the properties and applications of these materials differ significantly. Cemented carbide is known for its hardness and wear resistance, making it suitable for heavy-duty machining, while uncoated cermet offers high-temperature resistance and a smoother finish. It is crucial to verify the source data to ensure accuracy and consistency, as this will enable the creation of a reliable and comprehensive product description that meets customer expectations and technical requirements.
SPGT 090304 TH10 W15 Wendeplatten - Tungaloy
Take advantage of the combination of low cutting forces, clean surface finish and ISO‑standard compatibility to maintain stable turning processes and reduce rework. Order the insert directly via Metav Werkzeuge or ask our consultants for application matching. SPGT 090304 TH10 – Tungaloy turning insert (SPGT090304L-W15, 90°) The SPGT090304L-W15 TH10 is an ISO‑standard indexable insert for external and internal turning, designed for low cutting forces and clean finishes in non‑ferrous and similar materials. ISO square insert, 90° geometry Uncoated carbide TH10 for low cutting forces W15 chipbreaker for improved surface finish 11° relief angle for stable tool engagement Consistent finishes with low cutting effort The insert's uncoated carbide grade TH10 is formulated for applications where reduced cutting forces and a clean surface are decisive. With the W15 chipbreaker, chips are formed consistently, which lowers the risk of surface damage and eases chip evacuation. This combination provides a tangible benefit in shorter cycle times for light to medium turning tasks and helps to maintain dimensional control on delicate workpieces. Broad ISO compatibility simplifies tool selection As an ISO‑standard indexable insert, compatibility depends on holder shape, clearance angle, tolerance class, fastening method, size and thickness. The square form and the 90° main cutting edge make the geometry suitable for facing and general turning operations. Choosing a holder that matches the insert’s form and the specified 11° relief ensures secure clamping and reduces the need for frequent adjustments, contributing to predictable process stability. Economical machining through targeted tool choice Sharp, uncoated edges such as those of grade TH10 require lower cutting forces, which often translates into reduced spindle load and extended toolholder life. The efficient chip control from the W15 chipbreaker minimises interruptions for chip clearing and helps to produce a consistent surface finish, lowering the incidence of rework. When productivity and repeatability are priorities, this insert supports cost‑effective batch production without sacrificing finish quality. Practical setup and handling advantages The insert is supplied with a central hole and a cylindrical hole style with a single countersink (40°–60°), which facilitates reliable clamping with standard screws and underlays. The nominal thickness of 3.18 mm and a corner radius of 0.4 mm allow fine control over cutting edge engagement and surface integrity. Given these characteristics, the insert is a practical choice for workshops seeking a balance between ease of use and consistent results in turning applications. Contact Metav Werkzeuge today to discuss the suitability of the Tungaloy SPGT090304L-W15 TH10 insert for specific turning tasks or to arrange procurement; email info@metav-werkzeuge.com or call +49 2822 7131930 for expert advice and fast supply Technical data Article number: 6807090 SKU: 6807090-Tungaloy Manufacturer SKU: TUN6807090 Series: ISO‑Drehwendeschneidplatten Core data Shape/size: square, 09 Thickness: 3.18 mm Corner radius: 0.4 mm Main angle: 90° Relief angle: 11° Special features Material: carbide Grade: TH10 Chipbreaker: W15 ISO designation: 090304 Geometry: SPGT090304L-W15 Hole: with hole Hole style: cylindrical hole + single countersink (40°–60°) Application: turning FAQ What materials is this insert best suited for? The Tungaloy SPGT090304L‑W15 in grade TH10 is optimised for non‑ferrous materials and applications where a clean surface and low cutting forces are required. How does the W15 chipbreaker affect performance? The W15 chipbreaker controls chip shape and evacuation, leading to improved surface finish and fewer interruptions for chip clearing during turning. Can the insert be used for internal as well as external turning? Yes, the ISO square geometry and 90° main cutting edge make the insert suitable for both external and internal turning when paired with a compatible holder. What does the 11° relief angle mean for cutting? An 11° relief angle reduces rubbing behind the cutting edge, improving tool engagement and helping to maintain stable cutting forces during operation. How is the insert secured in the holder? The insert features a central hole and a cylindrical hole style with a single countersink (40°–60°) for reliable clamping with standard screws and underlay sets. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SPGT 090308 NS9530 Wendeplatten - Tungaloy
Take advantage of the combination of precise finishing performance, low cutting forces and straightforward ISO compatibility to maintain consistent part quality and efficient machining. Order original Tungaloy inserts through Metav Werkzeuge or request application advice from our specialists. SPGT 090308 NS9530 (SPGT) — Tungaloy turning insert for finishing SPGT 090308 NS9530 is an ISO-format, indexable turning insert designed for finishing operations on steel where surface quality and low cutting forces are required SPGT 090308 ISO turning insert NS9530 Uncoated cermet for finishing steel 11° clearance angle and 0.8 mm corner radius Cylindrical hole with 40°–60° countersink Achieve superior surface finish with low cutting forces The uncoated cermet grade NS9530 is engineered for finishing cuts: its sharp cutting edge reduces cutting forces and supports continuous cuts and small depths of cut. The result is improved surface quality and dimensional control with reduced vibration tendency. The combination of an 0.8 mm corner radius and an 11° clearance angle helps maintain a stable cutting geometry, which is especially beneficial when tight tolerances and repeatable finishes are required in production runs. Confident holder compatibility saves setup time The insert follows ISO norms, so compatibility with the chosen toolholder is defined by form, clearance, tolerance class, fixing method, size and thickness. The insert is supplied in a square 09 format with a 3.18 mm plate thickness and a cylindrical hole with a 40°–60° one-sided countersink, simplifying clamping in many standard external holders and boring bars. A complete system comprises the indexable insert, a matching holder, a shim/clamping pack and replacement screws, which ensures predictable integration into existing tooling systems. Efficient finishing across external and internal turning This grade is intended for finishing of steel in both external and internal turning. With a single-sided chipbreaker selected to match workpiece stability, the insert maintains process security and consistent results across batches. Lower cutting forces translate into reduced spindle load and often longer tool life under continuous machining conditions, delivering both productivity and quality benefits in finishing operations. For application advice or to obtain original Tungaloy inserts, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 — Metav Werkzeuge can advise on holder compatibility and availability. Technical data Article number: 6997940 Manufacturer SKU: TUN6997940 SKU: 6997940-Tungaloy Designation: SPGT090308 NS9530 Facts Shape: square (09) Plate thickness: 3.18 mm Clearance angle: 11° Included hole: with hole Corner radius: 0.8 mm Insert angle: 90° Special features Grade: NS9530, uncoated cermet Chipbreaker: single-sided Hole style: cylindrical hole + one-sided countersink (40°–60°) Typical application: external and internal turning System components: insert, holder, shim/clamping set, replacement screws FAQ Which materials is this insert suited for? The SPGT 090308 NS9530 insert from Tungaloy is a finishing grade primarily intended for steel; it performs best in continuous cuts and small depths of cut where surface quality is the priority. How is the insert fixed in a holder? The insert uses a central cylindrical hole with a one-sided countersink (40°–60°) for standard clamping; ensure the holder matches the insert form, size, thickness and tolerance class to secure correct positioning. What does the NS9530 grade mean in practice? NS9530 denotes an uncoated cermet composition with a sharp cutting edge optimised for low cutting forces and high surface finish during finishing operations on steel. Can this insert be used for both external and internal turning? Yes, the SPGT 090308 NS9530 is suitable for both external and internal turning; select a compatible chipbreaker and holder based on workpiece stability and machining parameters. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SPGT 090308 TH10 Wendeplatten - Tungaloy
Benefit from a combination of economical performance, consistent edge life and straightforward clamping that keeps production flowing. The compact geometry and sharp, uncoated carbide grade support low cutting forces and fine surface quality in non-ferrous turning; Order the (SPGT090308 TH10) directly via (Metav Werkzeuge) or ask our consultants if needed. SPGT090308 TH10 — ISO turning insert, uncoated carbide, square 90° — Tungaloy The SPGT090308 TH10 is a square ISO turning insert intended for external and internal turning, offering low cutting forces and clean finishes suited to non-ferrous materials and light‑duty steel operations ISO‑standardised 90° square insert Uncoated carbide for low cutting forces One‑sided chipbreaker for controlled chips Cylindrical hole with 40°–60° countersink Reliable ISO format for flexible tool systems The insert is supplied in an ISO format that ensures repeatable positioning and simple interchangeability across standard turning holders. Compatibility is determined by form, relief angle, tolerance class, clamp and thickness; this makes the component an efficient choice in mixed‑tool environments where fast changeovers and predictable seating are essential. Using ISO‑compliant inserts reduces set‑up time and simplifies inventory management while maintaining process stability. Sharp, uncoated grade for low cutting forces and fine finish The TH10 grade, an uncoated carbide, is engineered as a sharp universal grade that excels with non‑ferrous materials and applications demanding minimal cutting resistance. The absence of a coating lowers friction at the cutting edge, which reduces built‑up edge and helps produce cleaner surfaces with fewer burrs. For workshop tasks where surface appearance and low tool pressure are priorities, this grade offers a reliable balance between edge life and finish quality. Geometry that supports stability and secure clamping The insert’s 90° included angle and square insert outline provide robust support against radial cutting loads, while the 0.8 mm corner radius gives a compromise between edge strength and finish. A relief of 11° aids in chip evacuation and reduces rubbing on the flank. The centre cylindrical hole with a single‑sided countersink (40°–60°) and a plate thickness of 3.18 mm enable secure fastening with standard screws and clamping systems, maintaining repeatable positioning even under interrupted cuts. Practical advantages for workshop productivity Equipped with a one‑sided chipbreaker, the insert promotes controlled chip formation for many turning operations, lowering manual rework and improving cycle consistency. The compact geometry and universal grade mean fewer tool variants are required on the shelf, supporting cost‑effective stocking and faster job turnaround. For shops aiming to streamline processes, this configuration combines machining efficiency with straightforward tool handling. For reliable turning performance with Tungaloy TH10 inserts, contact Metav Werkzeuge for ordering and technical advice by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 — our consultants will assist with holder compatibility and application selection. Technical data Article number: 6807093 Manufacturer SKU: TUN6807093 SKU: 6807093-Tungaloy Designation: SPGT090308 TH10 Core measurements Included angle: 90° Relief angle: 11° Corner radius: 0.8 mm Thickness: 3.18 mm Size: 09 Materials & features Material: carbide (uncoated) Grade: TH10 Shape: square insert Hole: cylindrical hole with single‑sided countersink (40°–60°) Chipbreaker: one‑sided Application: turning System: ISO turning insert series FAQ What materials is this insert best suited for? The SPGT090308 TH10 insert is optimised for non‑ferrous materials and light‑duty steel applications thanks to the TH10 uncoated carbide grade. How does the 0.8 mm corner radius affect performance? A 0.8 mm corner radius balances edge strength and surface finish; the SPGT090308 TH10 benefits from this radius by providing a durable edge while maintaining a fine finish in turning. Is the insert compatible with standard ISO turning holders? Yes. The SPGT090308 TH10 follows ISO dimensions and is compatible with holders that match the form, relief angle and thickness specified for ISO turning inserts. What chip control can be expected from this insert? With a one‑sided chipbreaker, the insert offers predictable chip formation for many turning tasks, improving machining consistency and reducing manual handling of chips. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SPGT 090308 TH10 Wendeplatten - Tungaloy
Benefit from the combination of low cutting forces, a sharp uncoated carbide grade (TH10) and ISO compatibility for consistent turning results on non‑ferrous materials; order directly via Metav Werkzeuge or consult the technical team for application advice. SPGT090308 TH10 SPGT — Turning insert, uncoated carbide, R0.8 — Tungaloy SPGT090308 TH10 is an indexable turning insert for ISO-series turning operations, engineered for clean finishes and low cutting forces in non‑ferrous applications. ISO-series SPGT 090308 insert, universal fit Sharp uncoated carbide grade TH10 for low cutting forces 0.8 mm nose radius for fine surface finish Square 09 format, 3.18 mm thickness Cylindrical hole with single-sided countersink 40°–60° Higher productivity through reduced cutting force The uncoated carbide composition and the TH10 sharp, universal grade reduce the energy required for shearing, which directly lowers cutting forces during external and internal turning of non‑ferrous materials. Reduced radial load improves tool stability on slender setups and helps achieve a fine surface finish with fewer burrs. Where machining demands clean edges and minimal secondary operations, this cutting geometry delivers a measurable efficiency advantage. Secure seating and repeatable accuracy for reliable indexing Compatibility with ISO holders is determined by form, clearance angle, tolerance class, mounting and plate size; the square 09 format, 3.18 mm thickness and 11° clearance ensure a precise seat and predictable clamping behaviour. The cylindrical hole with a single‑sided countersink (40°–60°) provides positive location and secure fastening, while the R0.8 nose radius supports consistent corner strength and surface integrity. The result is straightforward indexability and reproducible part quality from one insert to the next. Application flexibility and controlled chip formation Equipped with a one‑sided chipbreaker, the insert supports tailored chip control for a range of turning operations; selecting the matching chipbreaker and grade according to stock material and stability yields optimum results. Typical system components include the ISO insert, a compatible external holder or boring bar, a supporting shim/clamp set and replacement screws to complete the tooling system. The sharp uncoated edge is especially suited to materials and operations where low cutting forces and excellent finish outweigh the need for coated wear resistance. For precision turning with Tungaloy’s TH10 grade, contact Metav Werkzeuge for specific application guidance or to request this SPGT090308 insert — eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical Data Article number: 6807095 Manufacturer SKU: TUN6807095 SKU: 6807095-Tungaloy Designation: SPGT090308 Material: carbide Facts Nose radius: 0.8 mm Included angle: 90° Clearance angle: 11° Plate size: 09 Plate thickness: 3.18 mm Special features Grade: TH10 (uncoated) Chipbreaker: one-sided Plate form: square Hole: cylindrical with single-sided countersink 40°–60° Application: turning Typical system: ISO insert + external holder/boring bar + shim/clamp set + screws FAQ What materials is this insert best suited to? This SPGT090308 TH10 insert is designed primarily for non‑ferrous materials and for operations where an uncoated, sharp cutting edge supports low cutting forces and a clean surface finish. How does the TH10 grade affect machining performance? The TH10 uncoated grade gives a sharp cutting edge that reduces cutting forces and promotes stable chip formation, which benefits surface quality and reduces the need for secondary finishing when using the SPGT090308 insert. Is the insert compatible with standard ISO holders? Yes, the insert follows ISO dimensions; compatibility depends on holder form, clearance angle, tolerance class, mounting and plate thickness — the dimensions and hole style of this insert match common ISO turning holders. Which chip control can be expected with this geometry? The one‑sided chipbreaker provides controlled chip formation for typical turning operations; selecting the correct chipbreaker variant and machining parameters will optimise chip evacuation and tool life for the application. What system components are recommended to use with this insert? A complete system comprises the ISO insert, a suitable external holder or boring bar, a supporting shim/clamp set and replacement screws to secure repeatable clamping. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SPGT 120404 NS9530 Wendeplatten - Tungaloy
Take advantage of the combination of precision finishing, low cutting forces and ISO compatibility for reliable turning results; order the insert via Metav Werkzeuge or consult our specialists for application advice. SPGT 120404 NS9530 turning insert — Tungaloy, uncoated cermet for finishing The SPGT120404L-W20 NS9530 insert is an ISO-format, square turning insert designed for fine finishing of steel components, optimised for continuous cuts and small depths of cut. Square ISO insert, 12 mm size Uncoated cermet grade NS9530 Sharp edge for fine surface finish 11° relief angle and 0.4 mm corner radius High-precision finishing with low cutting effort The SPGT120404L-W20 NS9530 insert is specified as a finishing grade for steel and delivers a high surface finish thanks to its sharp cutting edge and uncoated cermet composition. The combination of low cutting forces and a stable cutting edge reduces deflection in slender parts, which means surface integrity is preserved and subsequent machining or polishing steps can often be minimised. For continuous cuts and small depths of cut this geometry is particularly effective, producing repeatable part quality in serial production. ISO compatibility and secure clamping for predictable results This insert is part of an ISO turning insert series, so compatibility with a holder is determined by the insert’s shape, relief angle, tolerance class, clamping type, size and thickness. The 11° relief angle and standard mounting with a cylindrical hole and single-sided countersink ensure reliable seating and torque transmission when combined with a matching external holder or boring bar. Using the correct holder and clamping set reduces vibration and secures repeatable positioning, enabling predictable process behaviour on automated lathes. Geometry that balances edge strength and surface quality A 0.4 mm corner radius provides a balanced compromise between edge robustness and an ability to achieve fine finishes on external and internal profiles. The square 12 mm plate form and 4.76 mm thickness offer a solid support area that aids heat dissipation and edge stability during finishing operations. The integrated W20 chipbreaker is tuned for the intended regime, controlling chip flow on small depths of cut and helping to avoid built-up edge on steels when feeds and speeds are set for finishing performance. System approach and application guidance for turning The recommended system consists of the ISO insert, a suitable external holder or boring bar, plus an underlay/clamping set and replacement screws. Selection of chipbreaker and grade should be matched to the workpiece material and the process stability: the NS9530 grade is best used for steel finishing where continuous cut conditions prevail. Typical applications include external and internal turning where surface quality and minimal cutting forces are priorities; care should be taken to match feed and speed to the cermet finishing regime to prevent thermal overload. For focused finishing of steel components, specify the Tungaloy NS9530 SPGT ISO insert and contact Metav Werkzeuge for availability, cutting-parameter recommendations and application support at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6997941-Tungaloy Manufacturer SKU: TUN6997941 Manufacturer article number: 6997941 Brand: Tungaloy Core dimensions ISO designation: SPGT120404L-W20 Insert size: 12 mm Thickness: 4.76 mm Corner radius: 0.4 mm Relief angle: 11° Insert shape: square (90°) Hole: with hole — cylindrical hole + single-sided countersink (40°–60°) Features & compatibility Material: carbide Grade/coating: uncoated cermet NS9530 Chipbreaker: W20 Typical application: turning (external and internal) System composition: ISO insert, holder or boring bar, underlay/clamping set, replacement screws FAQ Which materials is this insert suited for? The SPGT120404L-W20 NS9530 insert is specified as a finishing grade for steel and is optimised to produce excellent surface quality under continuous cutting conditions. What chipbreaker should be used for finishing steel? The insert is supplied with a W20 chipbreaker, which is designed for small depths of cut and continuous finishing operations on steels with the NS9530 cermet grade. How is the insert secured in the holder? The SPGT120404L-W20 features a cylindrical hole with a single-sided countersink (40°–60°); matching the insert to a compatible holder and clamping set ensures correct seating and repeatable positioning. What geometric data matter when selecting a holder? Key dimensions are the 12 mm size, 4.76 mm thickness, 0.4 mm corner radius and 11° relief angle; these determine clearance, support and the appropriate clamp and seat in the holder. Is this insert suitable for internal and external turning? Yes — the ISO-format insert is intended for both external and internal turning; toolpath planning should match the finishing regime for optimal surface results. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SPGW 090302 TH10 Wendeplatten - Tungaloy
Take advantage of the SPGW090302 TH10 design: a square ISO insert offering a sharp, uncoated cemented carbide cutting edge, low cutting forces and clean surface finish for turning operations. Order directly via Metav Werkzeuge or consult our specialists for application-specific advice. SPGW 090302 TH10 square ISO turning insert, 11° clearance — Tungaloy SPGW 090302 TH10 is an ISO-format indexable insert designed for general turning of non-ferrous workpieces and similar applications, combining a sharp uncoated grade with a robust square geometry for secure seating in standard holders. Square ISO insert size 09 Uncoated cemented carbide TH10 11° clearance angle for stable cutting Cylindrical hole with countersink Durable grade for low-force machining and improved finishes The TH10 grade is an uncoated cemented carbide developed as a sharp universal option where low cutting forces and a clean surface are required. For workshops machining non-ferrous metals, the combination of a fine cutting edge and the square geometry reduces deflection and helps to maintain repeatable part quality. The lack of a coating keeps the cutting edge sharp, which is especially beneficial when optimising feed rates and minimizing built-up edge during light to medium turning. ISO compatibility and secure clamping for repeatable results Built to ISO standards, this indexable insert features a square form and a central fastening arrangement with a cylindrical hole plus a single-sided countersink (40°–60°), ensuring consistent seating and simple replacement in compatible external holders or boring bars. The 11° clearance angle and the 90° included angle support predictable contact geometry, which simplifies toolholder selection and contributes to constant cutting conditions across production batches. Practical performance in turning operations With a 3.18 mm thickness and a 0.2 mm corner radius, the insert provides a balance between edge strength and the ability to produce fine surface finishes. The geometry suits both external and internal turning when matched with an appropriate holder, and the uncoated grade assists in achieving cleaner chip formation on non-ferrous materials. Absence of a dedicated chipbreaker must be considered when planning chip evacuation; appropriate feeds and coolant strategies will maintain machining stability. Selection advice and application guidance When choosing inserts for turning, prioritise the match between grade and workpiece material: the sharp, uncoated TH10 is recommended for aluminium, brass and similar alloys where surface quality and low cutting forces matter. Verify holder compatibility by checking form, clearance angle, tolerance class, fixation and insert size. For uncertain cases or to define cutting parameters, rely on process data from experienced tooling suppliers or request assistance from Metav Werkzeuge to ensure the chosen solution fits the machining task. Discuss precise cutting parameters and secure supply of Tungaloy SPGW090302 TH10 inserts with Metav Werkzeuge for optimal turning performance Technical Data Article number: 6807100 Manufacturer SKU: TUN6807100 Model series: ISO turning indexable inserts Material: cemented carbide Grade: TH10 ISO designation: SPGW090302 Shape: square (SPGW) Facts Size: 09 Thickness: 3.18 mm Corner radius: 0.2 mm Clearance angle: 11° Included angle: 90° Hole: with hole Hole style: cylindrical hole + single-sided countersink (40°–60°) Special features Uncoated cemented carbide, sharp universal grade No chipbreaker included Suitable for turning (external and internal) ISO-compatible mounting and dimensions Designed for non-ferrous materials and applications requiring low cutting forces FAQ What materials is this insert best suited for? This insert is specified for turning non-ferrous materials; the TH10 uncoated grade is particularly effective on aluminium, brass and similar alloys. How does the ISO designation SPGW090302 translate into geometry? The designation indicates a square insert with size 09, a 90° included angle and the specific hole and tolerance features corresponding to the SPGW form. Is there a chipbreaker on this insert? No, the item is supplied without a chipbreaker; machining strategies should account for chip control via feed selection and suitable tooling geometry. Which holders are compatible with this insert? Compatibility depends on form, clearance, tolerance class, fixation and insert thickness; the insert is intended for standard ISO external holders or boring bars that accept SPGW inserts. How should the central hole and countersink be used during mounting? The cylindrical hole with single-sided countersink (40°–60°) secures a stable clamping interface in compatible toolholders, ensuring repeatable seating and torque distribution. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SPGW 090304 TH10 Wendeplatten - Tungaloy
Take advantage of the ISO compatibility and the TH10 uncoated carbide grade to achieve low cutting forces and clean surface finishes in turning operations; pair the insert with a suitable ISO holder and clamping kit from Metav Werkzeuge for reliable set-up and productive machining. SPGW 090304 TH10 — ISO indexable turning insert for turning, Tungaloy SPGW 090304 TH10 is an ISO-format indexable insert designed for general turning applications, providing a sharp, uncoated cutting edge for non-ferrous materials and finishing cuts ISO-format for broad holder compatibility Uncoated carbide for low cutting forces Square form with 0.4 mm corner radius Cylindrical hole with single-sided countersink Consistent fit and straightforward integration into ISO systems The ISO-standard designation ensures that the insert mates predictably with compatible holders, simplifying tool selection and reducing set-up time. The geometry is specified by form, relief angle, tolerance class, fastening arrangement, size and thickness, which together determine holder compatibility. Using an insert conforming to ISO specifications reduces variation between tool changes and supports consistent process parameters on the machine, helping to maintain cycle times and part quality. Sharp uncoated grade for clean finishes and lower cutting forces The TH10 grade is an uncoated carbide developed for applications where a sharp, uncoated cutting edge benefits the operation. This grade promotes low cutting forces and a clean surface finish when machining non-ferrous materials or light finishing cuts. Because the insert is uncoated, it can help to avoid adverse reactions such as built-up edge on softer materials; this characteristic makes the insert well suited to operations that prioritise surface integrity over extreme wear resistance. Geometry and clamping designed for stable, repeatable turning The square form and 0.4 mm corner radius deliver a robust cutting profile that is compatible with common turning strategies. The 11° relief angle supports positive cutting action and helps reduce rubbing on the flank. The insert is supplied with a cylindrical hole and a single-sided countersink (40°–60°), enabling secure clamping and repeatable seating in the toolholder. The 3.18 mm thickness contributes to rigidity in the cutting zone, which reduces vibration and supports a consistent surface result during external and internal turning. Application guidance to improve productivity in turning This indexable insert is intended for turning tasks where a clean cut and controllable forces are important. The absence of an integrated chipbreaker indicates the insert is optimally used in processes that rely on stable chip evacuation via geometry, coolant strategy or downstream chip control rather than aggressive chip segmentation. For best results, select a holder and clamping set that match the insert’s ISO geometry, and choose feeds and speeds aligned with TH10’s strengths to balance tool life and part finish. Discuss application requirements and holder compatibility with Metav Werkzeuge — specialists can advise on matching the Tungaloy TH10 insert to the correct ISO holder and clamping kit; contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6807101 SKU: 6807101-Tungaloy Manufacturer SKU: TUN6807101 Model series: ISO-Drehwendeschneidplatten Label: SPGW090304 TH10 Tungaloy-Wendeplatte Manufacturer: Tungaloy Facts Size: 09 Plate thickness: 3.18 mm Corner radius: 0.4 mm Relief angle: 11° Included angle: 90° Special features Material: cemented carbide Grade: TH10 (uncoated) Form: square Hole: with cylindrical hole and single-sided countersink (40°–60°) Chipbreaker: none Application: turning System composition: ISO insert, compatible external holder or boring bar, shim/clamping set and replacement screws FAQ What materials is this insert best suited to machine? The SPGW 090304 TH10 insert is specified for machining mainly non-ferrous materials and light finishing operations; the TH10 uncoated carbide grade supports low cutting forces and good surface quality when turning softer alloys. How does the insert secure in the toolholder? The insert features a cylindrical hole with a single-sided countersink, designed for secure clamping in compatible ISO holders; correct seating is ensured by matching the holder to the insert form, relief angle and thickness. Is there a chipbreaker integrated on this insert? No; this particular configuration is supplied without a chipbreaker, so chip control should be managed by process parameters, holder geometry or downstream chip management when using this insert. Can the insert be used for both external and internal turning? Yes; the insert’s geometry and thickness provide sufficient rigidity for both external and internal turning when employed with an appropriate holder and stable set-up. What are the key geometry values to check when selecting a holder? Verify the insert size (09), 3.18 mm thickness, 0.4 mm corner radius, 11° relief angle and the cylindrical hole with countersink to ensure full compatibility with the chosen toolholder. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SPGW 120404 TH10 Wendeplatten - Tungaloy
Take advantage of the combination of ISO compatibility, a sharp uncoated TH10 grade and robust square geometry for consistent turning performance; order directly via Metav Werkzeuge or contact our consultants for application advice. SPGW120404 TH10 ISO turning insert – square 12 mm, 90° by Tungaloy The SPGW120404 TH10 is an ISO-indexable turning insert designed for external and internal turning, offering a sharp uncoated carbide edge for low cutting forces and reliable mounting with a cylindrical hole and single-sided countersink. ISO-indexable geometry for fast tool changes Uncoated TH10 carbide for low cutting forces Square 12 mm plate with 90° cutting angle Cylindrical hole with single-sided countersink Reduced setup time through ISO compatibility The insert is manufactured to the ISO specifications that determine form, clearance and tolerance class, ensuring repeatable clamping and rapid changeovers. Because compatibility depends on holder form, 11° clearance, fastening type, size and thickness, matching the insert to an ISO holder reduces downtime and simplifies tool management. This standardised approach supports stable process planning and predictable cycle times in production environments. Cleaner cuts with a sharp uncoated carbide grade The TH10 grade is an uncoated carbide formulated as a sharp universal grade for non-ferrous materials and applications where a raw cutting edge promotes low cutting forces and a superior surface finish. Uncoated grades avoid the build-up tendencies of some coatings and are advantageous where thermal loading is moderate; the result is improved surface quality and reduced burr formation on softer metals compared with tougher, coated grades. Robust geometry for secure clamping and consistent edge life A 90° square plate geometry combined with a 0.4 mm corner radius provides a balance between rigidity and edge strength, allowing the insert to withstand interrupted cuts while maintaining good surface finish. The insert thickness of 4.76 mm and the cylindrical hole with a single-sided countersink (40°–60°) ensure secure mounting and torque transmission to the holder. These geometric choices translate directly into longer periods between indexings and reliable process stability. Versatile use in external and internal turning operations Intended for both external and internal turning, this indexable plate is part of a system comprising the ISO insert, a matching toolholder or boring bar, a backing/wedge and replacement clamping screws. Supplied without a chipbreaker, the insert is suitable where a plain edge is preferred; chip control and cutter selection should be matched to the workpiece material and machining stability. The result is a compact inventory of versatile inserts that cover a broad range of turning tasks on non-ferrous components. Contact Metav Werkzeuge for a compatibility check and secure supply of Tungaloy TH10 inserts, including advice on holder matching and recommended cutting data. Technical data Article number: 6807102 SKU: 6807102-Tungaloy Manufacturer SKU: TUN6807102 Model series: ISO turning inserts Designation: SPGW120404 TH10 Core specifications Shape: square Size: 12 mm Thickness: 4.76 mm Corner radius: 0.4 mm Clearance angle: 11° Cutting angle: 90° Hole: with cylindrical hole and single-sided countersink (40°–60°) Materials & features Material: carbide Grade: TH10 (uncoated) Chipbreaker: without Typical application: turning (external and internal) Suitability: non-ferrous materials System composition: ISO insert, suitable holder/boring bar, backing/clamping set, replacement screws FAQ What materials is this insert best suited for? The SPGW120404 TH10 insert from Tungaloy is optimised for non-ferrous materials and applications where a sharp uncoated edge reduces cutting forces and improves surface finish. Is the insert compatible with standard ISO turning holders? Yes. Compatibility requires a matching holder form, 11° clearance, correct tolerance class, fastening method, 12 mm size and 4.76 mm thickness; these parameters ensure secure clamping of the SPGW120404 TH10 insert. Does the insert include a chipbreaker? No, the Tungaloy SPGW120404 TH10 insert is supplied without a chipbreaker; chip control should be selected separately according to material, cut depth and machining stability. What is the corner radius and why does it matter? The corner radius is 0.4 mm; this radius improves edge strength and contributes to consistent surface finish while offering good resistance to edge chipping during intermittent cuts. Can this insert be used for internal turning? Yes, the insert is suitable for both external and internal turning operations when mounted in a compatible ISO boring bar or holder; the secure cylindrical hole and countersink support reliable mounting. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
SPMN 090304 T5115 Wendeplatten - Tungaloy
Thanks to its CVD-coated carbide grade and ISO compatibility, this insert delivers a robust balance of wear resistance and cutting-edge stability for cast iron turning. Benefit from the combination of dependable edge life and straightforward integration into ISO tool systems — order the insert directly via Metav Werkzeuge or consult the specialists for application advice. SPMN 090304 T5115 – Square indexable turning insert, CVD-coated carbide | Tungaloy The SPMN090304 T5115 indexable insert is designed for general external and internal turning, offering a universal grade optimised for cast iron and compatibility with ISO toolholders. CVD-coated carbide grade T5115 Universal grade for cast iron machining ISO format SPMN 090304 compatible Corner radius 0.4 mm, 11° clearance Durable wear performance for cast iron machining The CVD-coated carbide composition of this insert provides wear resistance and thermal stability during interrupted and continuous cuts in cast iron. The T5115 grade combines a hard coating with a tough substrate to maintain a stable cutting edge, reducing flank wear and extending index life under typical turning feeds and speeds. In production environments where repeatable part quality matters, the optimised coating-substrate pairing helps to maintain consistent tool life and surface finish, contributing to lower tooling costs per part and improved process reliability. Secure fit and system compatibility for fast tool changes Built to the ISO format SPMN 090304, the insert ensures consistent seating and orientation in standard holders. The square form delivers four usable cutting edges, enabling quick rotation to a fresh edge and minimised downtime. The standardised dimensions and tolerances support predictable clamping behaviour in compatible indexable insert holders, while the absence of a centre hole simplifies certain clamping systems. This predictability supports efficient tool management and straightforward spare-part logistics on the shop floor. Geometry focussed on edge stability and surface quality A corner radius 0.4 mm and an 11° clearance angle combine to provide a compromise between edge strength and surface finish. The moderate corner radius improves edge stability during heavier cuts, whereas the clearance angle reduces rubbing and improves chip flow. With a 3.18 mm thickness and a 90° included angle, the body of the insert contributes to rigidity in the cutting zone, supporting dimensional accuracy and repeatable results across batches. The geometry is therefore suited to operations that demand both durability and acceptable surface integrity without complex setup. Practical guidance for integration and grade selection When integrating this insert into a workflow, pair the ISO SPMN unit with an appropriate square holder and matching shim/clamping set to ensure correct rake and stability. Although this grade is a universal solution for cast iron, selecting a chipbreaker or alternative grade may further improve chip control for specific cast types or cutting conditions. The straightforward composition and ISO compliance of the insert support process optimisation: fewer tool changes, easier inventory handling and stable cycle times, which together raise productivity and process security on the machining centre. Contact Metav Werkzeuge to discuss the suitability of the Tungaloy SPMN090304 T5115 indexable insert for specific applications or to place an order; consultants are available at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 6862090 SKU: 6862090-Tungaloy Manufacturer SKU: TUN6862090 Manufacturer: Tungaloy Facts Size: 09 Shape: square Thickness: 3.18 mm Corner radius: 0.4 mm Clearance angle: 11° Included angle: 90° Materials & special features Material: carbide Coating/grade: T5115 (CVD-coated) Application: turning, external and internal No chipbreaker ISO format SPMN 090304 compatible FAQ What materials is this insert best suited for? The insert is designed as a universal grade for cast iron machining; the T5115 grade balances wear resistance and edge stability for a wide range of grey and ductile cast irons. Is the insert compatible with standard ISO holders? Yes, the SPMN 090304 designation denotes ISO compatibility; the insert fits holders designed for the SPMN 09 format and can be used with matching shims and clamping sets. What are the key geometry values to consider for setup? Important geometry values include the corner radius 0.4 mm, 11° clearance angle and 3.18 mm thickness, which together influence edge strength, chip flow and rigidity in the tool assembly. Does this insert include a chipbreaker? This version is specified without chipbreaker; chip control will depend on the paired holder geometry and cutting parameters. How many cutting edges does the square form provide? The square form offers four usable cutting edges per insert, enabling efficient index changes and extended service life before replacement. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com