TCMT 110208 T9225 Wendeplatten - Tungaloy
Benefit from a combination of CVD-coated carbide T9225 and the ISO TCMT 110208 geometry for robust, repeatable performance in medium-to-heavy steel turning; the insert's chip control and 0.8 mm corner radius support stable cutting and longer tool life. Order directly via Metav Werkzeuge or consult their technical team for grade and chipbreaker selection. TCMT110208 T9225 TCMT turning insert by Tungaloy — ISO triangular 60° with hole TCMT110208 T9225 is an ISO‑standard triangular indexable insert designed for versatile external and internal turning in medium‑to‑heavy steel applications ISO triangular insert TCMT 110208 format CVD‑coated carbide grade T9225 Robust universal grade for medium–heavy steel 0.8 mm chip‑forming radius, with hole Assured fit and secure clamping for standard turning systems The ISO designation and precise geometry ensure reliable compatibility with matching toolholders and clamping kits. The insert form is triangular with a 60° included angle, a 2.38 mm thickness and a nominal size of 11; seating and clamping are determined by form, relief angle, tolerance class, fastening method, size and thickness. The insert is supplied with a central hole and a cylindrical hole plus single‑sided countersink (40°–60°) to suit standard screws and locators, which simplifies replacement and reduces setup time when shank holders or boring bars are used in a system comprising an insert, a suitable outer holder or boring bar, a shim/clamping set and spare screws. Durable cutting edge and controlled chip formation for demanding steel work The T9225 grade is a CVD‑coated carbide chosen for its toughness and wear resistance in changing engagement conditions. As a robust universal grade, it is optimised for medium‑to‑heavy steel turning, providing a compromise between edge strength and hardness where slightly interrupted cuts or variable depths of cut occur. A one‑sided chipbreaker and the 0.8 mm corner radius promote predictable chip behaviour and reduce the risk of edge chipping, translating technical properties into practical benefits: fewer broken edges, more consistent surface finish and longer intervals between indexings. Predictable tool life and efficient process planning for production stability Consistent geometry and coating technology contribute to repeatable results and easier process planning. The CVD layer reduces flank wear under thermal load, while the substrate carbide maintains a robust cutting edge for interrupted cuts. For high‑mix production or batch work, this translates to lower downtime and reduced tooling inventory complexity. Metav Werkzeuge can advise on matching the T9225 grade and chipbreaker to workpiece material, clamping rigidity and intended cutting data to achieve the best balance of productivity and tool life. For technical configuration and fast delivery of Tungaloy TCMT 110208 T9225 inserts, contact Metav Werkzeuge for tailored advice and order support via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 6781095 Manufacturer SKU: TUN6781095 SKU: 6781095-Tungaloy Label: TCMT110208 T9225 Tungaloy‑Wendeplatte Manufacturer: Tungaloy Facts Insert form angle: 60° Inscribed size: 11 Thickness: 2.38 mm Corner radius: 0.8 mm Relief (free) angle: 7° Special features ISO turning insert, triangular form CVD‑coated carbide, grade T9225 One‑sided chipbreaker With central hole; cylindrical hole + single‑sided countersink (40°–60°) Suitable for external and internal turning; compatible with standard holders FAQ What materials is this insert best suited for? The TCMT110208 T9225 insert is developed as a robust universal grade for medium‑to‑heavy steel turning, offering good edge stability under variable engagement. How does the T9225 CVD coating benefit machining? The CVD‑coating on the T9225 grade increases wear resistance and thermal stability, helping the carbide substrate maintain cutting edge integrity during sustained turning of steel. Is the insert compatible with standard TCMT toolholders? Yes; the ISO format TCMT110208 is compatible with holders that match the TCMT form, 60° geometry, 7° relief and the specified thickness and hole style. Which chipbreaker should be chosen for interrupted cuts? For interrupted or unstable cuts, select the one‑sided chipbreaker combined with the T9225 grade to prioritise toughness and chip control for fewer edge failures. Are replacement screws and shims required for a full system? A complete system typically comprises the ISO insert, a matching outer holder or boring bar, an underlay/shim and replacement screws; these ensure correct seating and clamping repeatability. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
TCMT 110208 T9225 Wendeplatten - Tungaloy
Combining CVD-coated cemented carbide T9225 with a 0.8 mm corner radius provides a robust solution for medium-to-heavy steel turning, while the ISO‑format TCMT110208 ensures consistent holder compatibility and repeatable clamping. Order the insert directly via Metav Werkzeuge or consult our specialists for tailored recommendations. TCMT110208 T9225 TCMT – ISO turning insert for medium-to-heavy steel applications by Tungaloy TCMT110208 T9225 is an ISO‑standard indexable turning insert designed for external and internal turning where intermittent cuts or variable engagement demand increased toughness CVD-coated cemented carbide grade T9225 Robust for medium to heavy steel turning Triangular insert, 7° clearance angle Cylindrical hole with single-side countersink Higher process efficiency through tailored grade and coating The combination of a CVD coating and cemented carbide substrate in grade T9225 delivers a balance between wear resistance and toughness that suits variable cutting conditions. This insert is optimised for medium-to-heavy steel turning, where load peaks and lightly interrupted cuts occur; the coating reduces flank wear, while the substrate absorbs shock. For production environments this translates into a dependable service life and fewer unscheduled tool changes, improving overall equipment effectiveness and lowering unit costs per component. The insert geometry and material pairing provide a clear technical advantage when stable surface quality and tool longevity are required. Predictable compatibility and secure clamping to reduce setup time As an ISO‑standard insert, the TCMT110208 format simplifies tool selection and replacement across compatible holders. Compatibility with a holder is defined by shape, clearance angle, tolerance class, fastening method, size and thickness; the triangular form with a 7° clearance and 60° included angle gives a well‑known locating geometry that many external and boring holders accept. The cylindrical hole with a single‑side countersink (40°–60°) ensures secure clamping and repeatable positioning, which reduces setup variance and contributes to consistent batch quality. For workshops that switch between jobs or holders, this predictability saves adjustment time and minimises scrap rates. Geometry that supports chip control and surface integrity The 0.8 mm corner radius and the single‑sided chipbreaker are configured for robust chip formation on steels where moderate feed rates are used. A measured corner radius like 0.8 mm balances strength at the cutting edge and the ability to produce a controlled surface finish; larger radii spread cutting forces and lower peak stress, while the chipbreaker design guides chips away from the cutting zone to avoid re‑cutting. Together these features help maintain a consistent workpiece appearance and reduce the risk of built‑up edge in interrupted or unstable cuts. For finishing steps, choosing the correct radial engagement and feed will preserve surface quality without compromising insert life. Practical system guidance and maintenance for reliable production The cutting system consists of the ISO insert, an appropriate external holder or boring bar, a shim or clamp set and replacement screws. Selecting the correct chipbreaker and grade according to workpiece material and machine stability is essential: this insert is aimed at steel machining where the T9225 grade offers a universal, tough solution. Regular inspection of seating surfaces and torque on clamping screws supports repeatable results; keeping a small stock of TCMT110208 inserts and spare fastenings avoids downtime. If further technical data or application charts are required, Metav Werkzeuge provides assistance and cutting‑data support to align the insert choice with process demands. Contact Metav Werkzeuge today for ordering and application advice on the TCMT110208 T9225 turning insert and receive expert recommendations tailored to your workshop requirements. Technical Data Article number: 6781461 Manufacturer SKU: TUN6781461 SKU: 6781461-Tungaloy Model series: ISO‑Drehwendeschneidplatten Measurements Corner radius: 0.8 mm Plate thickness: 2.38 mm Plate size: 11 mm Included angle: 60° Clearance angle: 7° ISO designation: 110208 Materials & Special features Material: cemented carbide Coating: CVD‑coated Grade: T9225 Plate form: triangular Chipbreaker: single‑sided Hole: cylindrical hole with single‑side countersink (40°–60°) Typical application: external and internal turning FAQ What materials is this insert intended for? The TCMT110208 T9225 insert from Tungaloy is designed as a robust universal grade for medium‑to‑heavy steel turning, providing toughness where cutting conditions vary or cuts are lightly interrupted. How does the insert ensure secure clamping in the holder? Secure clamping is achieved via the cylindrical hole with a single‑side countersink, compatible with standard ISO locating systems; this gives repeatable positioning for the TCMT110208 format and reduces setup variation. When should the 0.8 mm corner radius be chosen? A 0.8 mm corner radius is recommended where a balance between edge strength and surface finish is needed—suitable for general turning operations on steel when increased edge stability is required. Does the chipbreaker suit finishing or roughing operations? The single‑sided chipbreaker supports controlled chip formation and evacuation in medium operations; for heavy roughing or precision finishing, select the chipbreaker and radial engagement appropriate to the specific task. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
TCMT 110208 T9225 Wendeplatten - Tungaloy
Taking advantage of a robust, CVD-coated carbide grade and ISO compatibility, this insert combines reliable performance with straightforward mounting for medium to heavy steel turning; order the TCMT110208 T9225 insert directly via Metav Werkzeuge or ask our consultants if needed TCMT 110208 T9225 Turning insert for Turning — Tungaloy TCMT 110208 T9225 is an ISO‑standard indexable turning insert designed for medium to heavy steel machining and interrupted cuts CVD-coated carbide grade T9225 for robust cutting ISO‑standard TCMT insert, triangle shape 0.8 mm corner radius with 7° clearance angle Centre hole with cylindrical bore and countersink Precision and cutting performance for tougher turning tasks The combination of a CVD-coated carbide substrate and the T9225 grade delivers a balance of hardness and toughness suited to heavier cutting conditions. As an indexable insert, it provides repeatable geometry and predictable wear patterns, which supports stable machining over longer runs. The coating reduces friction and improves edge life, so fewer changes are required and component quality remains consistent even under varying engagement conditions. Straightforward mounting and ISO compatibility for workshop efficiency Built to the ISO standard for insert geometry, the triangle‑shaped design with an included angle of 60° ensures predictable seating in compatible holders. The insert’s 0.8 mm corner radius and 7° clearance angle accommodate both finish and light roughing passes, while the centre hole with cylindrical bore and single‑sided countersink secures the insert reliably in the clamp. Correct holder selection depends on form, clearance angle, tolerance class, fastening, size and thickness — the TCMT designation helps identify the compatible clamping systems quickly. Practical use, chip control and system considerations Intended for external and internal turning, this cutting solution pairs best with a matching chipbreaker and a robust holder assembly comprising an outer holder or boring bar, shim/clamp set and replacement screws. The 2.38 mm thickness and ISO dimensions provide mechanical stability, reducing vibration during interrupted cuts. For assemblies and retrofit questions, technical advice and precise compatibility checks are available; the insert’s repeatable geometry makes it suitable for production environments aiming for consistent surface finish and cycle time reliability. For reliable medium to heavy steel turning with the Tungaloy TCMT 110208 T9225 insert, contact Metav Werkzeuge for procurement and technical advice — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6781056 Manufacturer SKU: TUN6781056 Model series: ISO-Drehwendeschneidplatten Material: carbide Numbers / Core technical data Included angle: 60° Clearance angle: 7° Thickness: 2.38 mm Insert size: 11 Corner radius: 0.8 mm Manufacturer item no: 6781056 Special features / Versions CVD-coated carbide Grade T9225, universal for medium to heavy steel machining Triangle insert form (TCMT) One-sided chipbreaker Centre hole with cylindrical bore + single-sided countersink (40°–60°) Suitable for interrupted cuts and variable engagement conditions FAQ What materials is this insert suitable for? The TCMT 110208 T9225 turning insert is optimised for steel machining, offering robust performance in medium to heavy steel turning applications. How does the T9225 grade affect tool life? The T9225 CVD coating and carbide substrate extend edge life under variable cutting conditions; the TCMT 110208 insert therefore delivers more consistent wear behaviour in interrupted cuts. Which holders are compatible with this ISO insert? Compatibility depends on holder form, clearance angle, tolerance class, fastening, size and thickness; the TCMT designation and ISO dimensions simplify matching to standard external holders or boring bars. Can this insert be used for internal turning? Yes, the insert’s geometry and secure centre clamping make the TCMT 110208 T9225 suitable for both external and internal turning when paired with an appropriate boring bar. What is included when ordering this insert? Orders typically include the individual TCMT 110208 T9225 indexable insert (SKU 6781056-Tungaloy); holders, shims and screws are supplied separately as required. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCMT 110302 AH6225 Wendeplatten - Tungaloy
Take advantage of the combination of a PVD-coated carbide AH6225 grade and the 60° triangular TCMT geometry to achieve consistent performance in rostfreier Stahl turning; order directly via Metav Werkzeuge or contact the consultants for tailored recommendations. TCMT110302 AH6225 indexable insert — ISO triangular insert for turning, 60° (Tungaloy) The TCMT110302 AH6225 is an ISO triangular indexable insert for external and internal turning, optimised for medium machining of rostfreier Stahl with a sharp, stable cutting edge. PVD-coated AH6225 grade for rostfreier Stahl 60° triangular geometry 0.2 mm corner radius for fine surface finish Single-sided chipbreaker, centre hole + countersink Consistent cutting performance for rostfreier Stahl components The combination of a PVD-coated surface and a wear-resistant carbide substrate in the AH6225 grade gives predictable tool life when machining rostfreier Stahl. The coating increases thermal and abrasive resistance, while the substrate maintains a sharp, yet stable edge under medium cutting conditions. As a result, machining cycles show fewer interruptions from tool changes and reduced risk of built-up edge formation. The small 0.2 mm corner radius contributes to improved surface finish on turned parts without sacrificing edge strength during typical finishing passes. Accurate seating and repeatable set-up in ISO tooling systems Designed to the ISO indexable insert standard, the triangular insert features a 7° relief angle and a nominal geometry of 60°, ensuring compatibility with matching external holders and boring bars. The insert thickness of 3.18 mm and plate size of 11 mm provide a secure clamp fit and repeatable locating, while the centre hole with cylindrical bore and one-sided countersink (40°–60°) accommodates standard fastening screws and clamping sets. Proper selection of holder form, tolerance class and fastening hardware translates into reduced vibration, repeatable run-out and predictable component tolerances when integrated into a production line. Predictable chip control and productive turning cycles A single-sided chipbreaker engineered for general-purpose turning delivers consistent chip formation across changing cut depths and workpiece stability. The chip control geometry helps evacuate swarf safely from both external and internal turning operations, lowering the chance of re-cutting chips and improving cycle reliability. Combined with the universal AH6225 grade, the insert supports efficient changeover between different rostfreier Stahl alloys, enabling smoother production planning and fewer tool inventory variants. The result is higher productivity through longer edge life and more consistent surface quality. For application-specific cutting data and to ensure optimal results with the AH6225 grade, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for expert guidance Technical Data Manufacturer article number: 6903329 SKU (manufacturer): TUN6903329 SKU: 6903329-Tungaloy Article designation: TCMT110302 AH6225 Tungaloy indexable insert Model series: ISO turning indexable inserts Material: carbide (Hartmetall) Core technical data Geometry: 60° Relief angle: 7° Plate size: 11 mm Thickness: 3.18 mm Corner radius: 0.2 mm Special features PVD-coated carbide AH6225 Universal grade for rostfreier Stahl Single-sided chipbreaker Centre hole with cylindrical bore + one-side countersink (40°–60°) Triangular plate form (TCMT) ISO designation: TCMT110302 Suitable for external and internal turning FAQ Is this insert suitable for machining stainless steel? The TCMT110302 AH6225 Tungaloy indexable insert is a universal grade specifically intended for rostfreier Stahl, offering a balance of sharpness and edge stability for medium cutting conditions. Which turning operations are appropriate for this insert? External and internal turning operations are covered; the single-sided chipbreaker supports general-purpose turning and the insert can be used in matching ISO holders for a variety of workpiece setups. What does a 0.2 mm corner radius mean for part finish and tool life? A 0.2 mm corner radius provides a compromise between surface finish and edge strength: it helps achieve finer surface quality while retaining sufficient edge stability for typical finishing and light-medium turning passes. How is the insert fixed to the toolholder and what must be checked for compatibility? The insert uses a centre hole with cylindrical bore and one-sided countersink; compatibility depends on holder form, relief angle (7°), tolerance class, attachment type, size and thickness—ensure the holder matches the ISO designation. What is the coating and substrate of this insert and what are the benefits? The insert is PVD-coated on a carbide substrate in the AH6225 grade, which improves wear resistance and thermal stability while maintaining a sharp cutting edge for reliable machining of rostfreier Stahl. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCMT 110302 AH6225 Wendeplatten - Tungaloy
Benefit from the combination of a sharp, PVD‑coated AH6225 grade and a 0.2 mm corner radius for reliable performance in rostfreier Stahl turning; order the TCMT110302 directly via Metav Werkzeuge or consult their technical advisers for application support. TCMT110302 AH6225 – ISO triangular turning insert for turning by Tungaloy (PVD‑coated carbide, 0.2 mm radius) The TCMT110302 AH6225 is an ISO‑format triangular turning insert optimised for external and internal turning operations in rostfreier Stahl, delivering a balance of edge sharpness and robustness for medium machining. PVD-coated carbide grade AH6225 0.2 mm corner radius for stable cuts 7° clearance with 60° insert angle Cylindrical hole with single-side countersink Consistent surface finish on rostfreier Stahl with a universal grade The insert’s AH6225 grade, supplied as a PVD‑coated carbide, is engineered for reliable performance in rostfreier Stahl under varying conditions. The coating increases wear resistance and helps maintain a stable cutting edge at elevated temperatures typical of stainless‑steel machining, while the substrate maintains toughness to resist chipping. This combination reduces the incidence of premature edge failure and supports consistent component quality over series production, improving process repeatability and lowering rework rates. Precision geometry that improves part consistency and tool life The triangular geometry with a 60° included angle, paired with a 0.2 mm corner radius and a 7° clearance, provides a controlled contact zone that balances edge strength and surface finish. The small corner radius concentrates cutting forces in a stable manner, limiting vibration on less rigid setups, while the relief angle prevents rubbing on the flank face. The cylinder hole plus single‑side countersink ensures repeatable clamping location and reliable seating in compatible holders, which is essential for dimensional accuracy during external and internal turning tasks. Fast integration into ISO tool systems for minimal downtime The insert is part of a standard ISO system: an ISO turning insert, an appropriate external holder or boring bar, a supporting shim/clamp set and replacement screws form the basic assembly. Compatibility to the holder is determined by form, relief angle, tolerance class, fastening method, size and thickness. Using a correctly matched holder and clamp set makes insert changes straightforward, reducing machine downtime and supporting a lean production rhythm while maintaining cutting performance. Practical machining guidance for dependable production Designed for medium‑cutting applications and variable conditions, the single‑side chipbreaker should be selected to match workpiece stability and machining strategy. The insert is suitable for both external and internal turning; select the chipbreaker and cutting parameters according to the component geometry and fixture stiffness. If further machining data or process parameters are required for specific rostfreier Stahl grades, the technical advisers can recommend cutter engagement, feed and speed strategies to optimise tool life and surface quality. Contact Metav Werkzeuge for application-specific advice and to order the TCMT110302 AH6225; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6951441 Manufacturer SKU: TUN6951441 SKU: 6951441-Tungaloy Model series: ISO turning inserts Type: TCMT110302 AH6225 turning insert Facts Corner radius: 0.2 mm Included angle: 60° Clearance (relief): 7° Insert size: 11 mm Thickness: 3.18 mm Special features Grade: AH6225 Coating: PVD Material: carbide (Hartmetall) Chipbreaker: one-sided Hole style: cylindrical hole + single-side countersink (40°–60°) FAQ Is this insert suitable for rostfreier Stahl? Yes. The TCMT110302 AH6225 turning insert is specified for rostfreier Stahl and features a PVD‑coated carbide grade optimised for that material class. Which holders are compatible with this ISO insert? Compatibility depends on the holder’s form, relief angle, tolerance class, fastening method, size and thickness; the TCMT110302 requires an ISO‑format triangular holder with the appropriate clamp and shim. What performance can be expected from the AH6225 grade? The AH6225 grade offers a balance of sharpness and edge stability for medium machining, delivering good wear resistance and consistent surface finish in rostfreier Stahl. How does the 0.2 mm corner radius affect machining? A 0.2 mm radius increases edge strength compared with a smaller nose while still allowing acceptable surface finish, reducing the risk of chipping on intermittent cuts. Does the insert have a chipbreaker and how should it be chosen? The insert features a one‑sided chipbreaker; select the chipbreaker and cutting parameters according to workpiece material, fixture rigidity and the intended machining operation. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCMT 110302 AH6225 Wendeplatten - Tungaloy
Benefit from the combination of a PVD-coated AH6225 grade, a 0.2 mm corner radius and secure clamping for consistent medium turning of stainless steel; order directly via Metav Werkzeuge or contact the consultants for tailored cutting data. TCMT110302 AH6225 ISO turning insert for medium turning by Tungaloy TCMT110302 AH6225 is a triangular indexable insert designed for external and internal turning, offering a sharp yet stable edge for variable conditions PVD-coated carbide AH6225 for stainless steel Sharp, stable cutting edge for medium turning Triangular insert with 0.2 mm corner radius Cylindrical hole with single-sided countersink High-performance cutting with reliable edge life The insert delivers a balance between edge sharpness and robustness thanks to the AH6225 grade and PVD-coated surface. This combination is optimised for machining stainless steel under varying feed and depth conditions, where a predictable microgeometry reduces flank wear and extends tool life. The design promotes steady chip formation and lowers the risk of built-up edge, allowing a smoother process with fewer interruptions. The practical benefit is improved process stability and more consistent part quality when compared with untreated grades. Secure mounting and precise geometry for efficient machining A triangular geometry with a 3.18 mm plate thickness and 7° relief ensures compatibility with standard ISO toolholders and contributes to vibration resistance during turning operations. The insert’s cylindrical hole with a one-sided countersink (40°–60°) facilitates accurate positioning and repeatable clamping, which shortens index times and preserves cutting geometry. For production environments, this translates into reduced setup variability and quicker return to nominal tolerances after tool changes. Adapted chip control for fewer secondary operations Equipped with a single-sided chipbreaker and a defined 0.2 mm corner radius, the insert supports controlled chip breaking at conventional cutting data for stainless steel. The chipformer promotes short, manageable chips that reduce the need for manual chip clearing and protect surface finish integrity. As a result, downstream operations such as deburring and inspection are less impacted, contributing to a more economical machining sequence and improved overall throughput. Practical selection and application guidance The ISO format and the TCMT110302 designation make the insert straightforward to specify in tool lists and cutting plans. Select this grade when machining stainless steel under medium cutting conditions where a sharp initial edge and sustained stability are required. Matching the insert to an appropriate holder and selecting compatible feeds and speeds will unlock the expected life and surface quality benefits; technical data and holder compatibility can be provided on request to ensure the correct assembly for each machining task. For consistent medium turning of stainless steel, specify the Tungaloy TCMT110302 AH6225 insert through Metav Werkzeuge; the team can provide cutting parameters and delivery advice—eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6951389 Manufacturer SKU: TUN6951389 SKU: 6951389-Tungaloy Type: ISO indexable turning insert TCMT110302 Grade/coating: AH6225, PVD-coated Material: carbide Application: turning Model series: ISO indexable turning inserts Numbers / Core technical data Thickness: 3.18 mm Size: 11 mm Corner radius: 0.2 mm Relief angle: 7° Included hole style: cylindrical hole + one-sided countersink (40°–60°) Main insert angle: 60° Designs / Special features Shape: triangular Chipbreaker: single-sided Compatibility: ISO-standard insert geometry — holder fit by form, tolerance and fastening Typical system: indexable insert, matching external holder or boring bar, shim/clamping set, replacement screw FAQ What materials is this insert intended for? The TCMT110302 AH6225 insert is specified for machining stainless steel and performs best in medium turning operations where a combination of sharpness and edge stability is required. How does the AH6225 grade affect tool life? AH6225 is a PVD-coated carbide grade developed to balance a sharp cutting edge with wear resistance; the result for the TCMT110302 insert is improved stand time under changing machining conditions. Is the insert compatible with standard ISO toolholders? Yes, the insert follows ISO indexable insert geometry and is compatible with holders that accept TCMT110302 dimensions, provided the holder matches the form, relief and fastening specifications. What chip control can be expected with this insert? The single-sided chipbreaker on this triangular insert produces short, controlled chips at conventional cutting data for stainless steel, reducing secondary handling and improving surface quality. Can the 0.2 mm corner radius be used for finishing passes? A 0.2 mm corner radius provides a compromise between strength and finish; it suits medium roughing to semi-finishing where moderate edge robustness and acceptable surface finish are required. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCMT 110302 AH6225 Wendeplatten - Tungaloy
Take advantage of a PVD-coated AH6225 grade for reliable edge stability and the fine 0.2 mm corner radius for precise finishes; combine these attributes with ISO compatibility for a streamlined turning process. Order through Metav Werkzeuge or consult the technical team for tailored application advice. TCMT 110302 AH6225 Tungaloy — Turning insert for Drehen, PVD-coated carbide, 60° A TCMT 110302 AH6225 triangular turning insert designed for general turning applications, offering a sharp yet stable cutting edge for rostfreier Stahl and similar materials. PVD-coated carbide AH6225 for rostfreier Stahl ISO-standard triangular insert with 60° geometry 0.2 mm corner radius for precision finishing Countersunk hole and 3.18 mm plate thickness Consistent edge life and process reliability The PVD-coated cemented carbide grade AH6225 delivers a controlled balance between sharpness and edge strength, making it especially suitable for machining rostfreier Stahl under mixed conditions. With a coating engineered to reduce built-up edge and enhance wear resistance, the insert provides stable chip formation and consistent surface quality across medium-duty turning operations. These technical properties translate to fewer interruptions for insert changes and more predictable cycle times, improving overall machining efficiency. Rapid setup and dependable clamping interface Engineers benefit from the ISO conformity of the triangular insert: its 60° included angle and standard form ensure compatibility with a wide range of external holders and boring bars when form, relief angle, tolerance class, fastening method, size and thickness match. The countersunk hole with cylindrical centre and one-sided countersink (40°–60°) facilitates secure mounting and repeatable positioning, which reduces setup variation and vibration—factors that directly affect tool life and surface finish. Fine-radius geometry for improved surface finish With a 0.2 mm corner radius, the insert is tuned for producing refined finishes while maintaining sufficient edge strength for interrupted cuts. The combination of a small radius and the unilaterally configured chipbreaker supports controlled chip flow and reduces the risk of edge chipping during light to medium cuts. For shops aiming to optimise part appearance without sacrificing throughput, this geometry offers a clear benefit in achieving tighter tolerances and consistent part quality. Material and application guidance for workshop planners The grade is specified for universal use on rostfreier Stahl, supporting shops that face variable alloys and changing process conditions. The insert forms part of an ISO insert system comprising the insert, suitable external holder or boring bar, cheesed shim/clamping kit and replacement screws. Selecting the correct chipbreaker and grade for the workpiece, depth of cut and machine stability is essential; the AH6225 grade is a robust choice when a dependable, general-purpose solution is required. Contact Metav Werkzeuge to discuss how the Tungaloy AH6225 range fits specific turning tasks or to reserve stock — email info@metav-werkzeuge.com or call +49 2822 7131930. Technical Data Article number: 6903324 Manufacturer SKU: TUN6903324 SKU: 6903324-Tungaloy Model series: ISO turning inserts Core Data Insert designation: TCMT110302 Size: 11 mm Plate thickness: 3.18 mm Corner radius: 0.2 mm Relief angle: 7° Included angle: 60° Special features Material: cemented carbide Coating / grade: PVD, AH6225 Shape: triangular Hole: with hole — cylindrical hole + one-sided countersink (40°–60°) Chipbreaker: one-sided Typical application: external and internal turning System: ISO insert, compatible with standard external holders and boring bars FAQ What materials is this insert suited for? The TCMT110302 AH6225 insert is specified for general use on rostfreier Stahl and can handle a wide range of stainless and alloyed steels under medium cutting conditions. How does the AH6225 grade affect machining stability? AH6225 is a PVD-coated carbide designed to balance a sharp cutting edge with reliable wear resistance, so the insert maintains process stability and consistent surface finish over longer runs. Is the insert compatible with standard ISO holders? Yes — the insert follows ISO geometry and will fit holders and boring bars that match the form, relief angle, tolerance class, fastening method, size and thickness of the plate. What benefits does the 0.2 mm corner radius provide? A 0.2 mm radius improves finish quality and edge strength for precision turning, allowing finer surface finishes without excessive risk of chipping during light to medium cuts. How should the countersunk hole be used during assembly? The cylindrical hole with one-sided countersink (40°–60°) ensures secure, repeatable clamping; use the matching shim/clamping set and screws specified for the holder system. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCMT 110302 AH6235 Wendeplatten - Tungaloy
Take advantage of the combination of PVD-coated cemented carbide AH6235, a 60° triangular form and a compact 0.2 mm corner radius for robust stainless-steel turning and reliable interrupted cuts; order the TCMT110302 AH6235 Tungaloy insert directly via Metav Werkzeuge or ask our consultants for application support. TCMT 110302 AH6235 Tungaloy turning insert — ISO turning indexable insert, PVD-coated carbide, 60° triangle TCMT 110302 AH6235 is an ISO‑standard turning insert designed for general external and internal turning applications, offering enhanced toughness for interrupted cuts and high notch‑risk machining. PVD-coated cemented carbide AH6235 Optimised for stainless steel machining 60° triangular insert for versatile turning Central hole with 40°–60° countersink Consistent performance on stainless steel and interrupted cuts The TCMT110302 AH6235 Tungaloy insert pairs a PVD coating with a cemented carbide substrate to extend tool life under challenging conditions. This grade is specifically formulated for stainless steel and operations with increased risk of edge breakdown, making it a rational choice where reliability matters. The tougher substrate reduces micro‑fracture during interrupted cuts, while the coating improves wear resistance; together these characteristics deliver fewer tool changes and more predictable cycle times, supporting a measurable increase in production efficiency. Geometry engineered to reduce rework and improve surface finish A 60° triangular form with a 0.2 mm corner radius and a 7° relief angle provides a balance between strength and finish capability. The compact corner radius helps achieve finer surface quality without sacrificing edge stability in heavier cuts. With a 3.18 mm thickness and standard ISO dimensions, the insert integrates into common holder systems — compatibility depending on form, relief, tolerance class, fastening method, size and thickness. The one‑sided chipbreaker is optimised for controlled chip formation in typical turning cycles, reducing the risk of rework and improving first‑pass yield. Process reliability that supports productive machining Adopting this insert supports stable, predictable machining thanks to its grade AH6235 and purpose‑built chip control. The combined effect is reduced downtime for tool changes and fewer scrapped parts, which contributes to a lower cost per component over time. Selecting the correct chipbreaker and matching the insert to holder rigidity and cutting parameters is key to unlocking the full productivity benefit. If application specifics are unclear, technical advice can help ensure the insert is applied where its notch resistance and toughness provide the greatest return. For tailored holder compatibility checks and application advice on Tungaloy AH6235 turning inserts, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for prompt technical support and ordering guidance Technical Data Article number: 6903498 Manufacturer SKU: TUN6903498 SKU: 6903498-Tungaloy Name: TCMT110302 AH6235 Tungaloy insert Model series: ISO turning indexable inserts Material: Cemented carbide Dimensions & Angles Insert size (inscribed circle): 11 mm Thickness: 3.18 mm Corner radius: 0.2 mm Relief angle: 7° Included angle: 60° Features & Application Grade/coating: AH6235, PVD coating Chipbreaker: one-sided Hole: cylindrical hole with single-side countersink (40°–60°) Shape: triangular Application: Turning; suitable for stainless steel and interrupted cuts Compatibility: determined by form, relief, tolerance class, fastening, size and thickness FAQ What materials is this insert best suited for? The TCMT110302 AH6235 Tungaloy turning insert is optimised for stainless steel and performs well in interrupted cuts and cases with elevated notch risk thanks to its tougher cemented carbide grade and PVD coating. How does the AH6235 grade affect tool life? AH6235 is a PVD‑coated, tougher carbide formulation that enhances notch resistance and wear performance; this results in longer effective tool life and greater process reliability for demanding turning operations. Which holder characteristics ensure correct compatibility? Compatibility depends on the insert form, relief angle, tolerance class, fastening style, size and thickness; matching these parameters with an ISO‑compatible holder avoids fit issues and ensures stable cutting conditions. Is this insert suitable for finishing passes? Yes — the 0.2 mm corner radius supports fine finishing where small radii are appropriate; combined with the 60° geometry, it can achieve good surface quality when run with appropriate feeds and speeds. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCMT 110302 AH6235 Wendeplatten - Tungaloy
Take advantage of the combination of a tough PVD-coated grade, precise ISO geometry and secure screw clamping for consistent turning of challenging materials; order directly via Metav Werkzeuge or consult our specialists for application guidance. TCMT 110302 AH6235 turning insert by Tungaloy — PVD-coated carbide, for rostfreier Stahl TCMT110302 AH6235 is an ISO-format indexable insert for external and internal turning, optimised for interrupted cuts and materials with high breakout risk PVD-coated carbide AH6235 for tough materials ISO TCMT 110302 triangular insert, 60° geometry 7° clearance angle and 0.2 mm corner radius Cylindrical hole with 40°–60° countersink, 3.18 mm thickness Increased process reliability for difficult materials The PVD-coated AH6235 grade combines a tougher substrate with a wear-resistant coating to reduce chipping in interrupted cuts and on rostfreier Stahl, supporting longer tool life and fewer unplanned tool changes. The insert’s careful design focuses on stable chip formation and resistance to built-up edge, which translates into fewer rejects and more predictable cycle times in series production. Selecting this insert helps to maintain surface quality while reducing the frequency of tool changeovers, improving overall throughput. Secure clamping and ISO compatibility for reproducible set-ups Built to ISO dimensions, the ISO TCMT 110302 form guarantees compatibility with standard toolholders when form, clearance, tolerance class, fastening method, size and thickness match. The insert features a cylindrical hole + countersink (40°–60°) for positive screw clamping, a 0.2 mm corner radius and 3.18 mm plate thickness — features that ensure repeatable seating and consistent cutting geometry. Using the correct holder, shim and clamping set reduces set-up time and provides repeatable concentricity and cutting conditions across batches. Practical performance recommendations for everyday turning This triangular, single-sided insert with a single-sided chipbreaker is suitable for both external and internal turning where intermittent cuts or poor material homogeneity can create breakout risk. Combine the insert with a robust external holder or a matched boring bar and choose feeds and cut depths that reflect the workpiece stability; the result is improved edge integrity and predictable tool wear. The overall system — insert, holder, shim and screws — is aimed at efficient machining operations and straightforward maintenance of cutting performance. For robust rostfreier Stahl turning choose the TCMT 110302 AH6235 from Metav Werkzeuge — contact Metav Werkzeuges’ technical team for tailored application advice via info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical Data Article number: 6903488 Manufacturer SKU: TUN6903488 Label: TCMT110302 AH6235 Tungaloy-Wendeplatte Facts Geometry angle: 60° Clearance angle: 7° Corner radius: 0.2 mm Plate thickness: 3.18 mm Size: 11 mm Design / Special features Material: carbide Coating/grade: PVD-coated AH6235 Insert shape: triangular Chipbreaker: single-sided Hole style: cylindrical hole + single-side countersink (40°–60°) Series: ISO turning indexable inserts Typical use: external and internal turning Application focus: interrupted cuts and high breakout risk; suitable for rostfreier Stahl FAQ What is the TCMT110302 AH6235 best used for? The TCMT110302 AH6235 insert is designed for external and internal turning, especially where interrupted cuts or material variability demand a tougher grade; it is particularly suitable for rostfreier Stahl. How is the insert clamped and what does the hole style mean? Clamping uses a screw through the cylindrical hole with a single-side countersink (40°–60°), ensuring secure seating and repeatable orientation for the indexable insert in standard ISO holders. Which toolholders are compatible with this insert? Compatibility depends on form, clearance, tolerance class, fastening method, size and thickness; the ISO TCMT 110302 designation ensures fit with standard TCMT holders and matched boring bars when those parameters align. How does the AH6235 grade improve performance? The PVD-coated AH6235 grade offers a tougher substrate and coating synergy that reduces chipping on interrupted cuts and improves edge stability, helping to extend tool life and maintain surface finish. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCMT 110302 AH725 Wendeplatten - Tungaloy
Take advantage of the proven combination of PVD-coated AH725 carbide, precise 60° triangle geometry and a fine 0.2 mm corner radius for reliable, repeatable turning performance; order the TCMT110302 AH725 turning insert directly via Metav Werkzeuge or ask our consultants if needed. TCMT110302 AH725 ISO turning insert — PVD-coated carbide, 60° triangle, Tungaloy A TCMT110302 AH725 triangular ISO insert for external and internal turning, designed for universal use where process reliability and controlled chip formation are required. ISO triangular insert TCMT110302, 60° geometry PVD-coated carbide grade AH725, universal use 0.2 mm corner radius for fine finishing Cylindrical hole with 40°–60° single-sided countersink Consistent process reliability with the AH725 grade The PVD‑coated AH725 carbide grade delivers a balance between toughness and wear resistance that supports stable material removal across steels and stainless steels. This combination reduces the risk of edge chipping under mixed‑material conditions and contributes to predictable tool life, which directly improves machine uptime and lowers rework. The coating assists in thermal and abrasive resistance, enabling steady cutting behaviour and better chip control during medium to rough turning. Geometry engineered for repeatable surface quality A 60° triangular geometry and a 0.2 mm corner radius provide a reliable cutting edge for both finishing and light roughing passes. The insert thickness of 3.18 mm and the 60° approach angle offer an even load distribution that helps maintain dimensional accuracy on shafts and turned bores. Where fine surface quality is the goal, the small corner radius minimises tool vibration and reduces cutting forces, producing a consistent finish without sacrificing edge life. ISO compatibility and straightforward system integration As an ISO‑standard insert, compatibility with toolholders depends on form, relief angle, tolerance class, fastening and size. The insert features a cylindrical hole with a 40°–60° single‑sided countersink, enabling secure clamping in many triangular holder designs. A system‑based view — insert, matching external holder or boring bar, shim/clamping kit and replacement screws — ensures quick replacement and minimal setup time, supporting shops that run a varied programme of parts and toolholders. Practical advantages for everyday machining The one‑sided chipbreaker concept supports controlled chip formation in typical turning operations while the universal character of the grade makes the insert a practical choice for smaller tools and operations where material mixes occur. Selecting the correct chipbreaker and stable clamping reduces scrap risk and enhances productivity. Overall, the geometry and grade combination is aimed at users seeking a dependable, easy‑to‑manage solution for general turning tasks. For tailored recommendations or to secure TCMT110302 AH725 inserts from Tungaloy, contact Metav Werkzeuge for expert advice and rapid supply at info@metav-werkzeuge.com or by phone on +49 2822 7131930 — orders and consultation available on request Technical data Article number: 6865196 Manufacturer SKU: TUN6865196 Brand: Tungaloy Model designation: TCMT110302 AH725 Facts ISO designation: 110302 Insert angle: 60° Corner radius: 0.2 mm Thickness: 3.18 mm Size: 11 mm Special features Material: carbide Coating: PVD Grade: AH725 Chipbreaker: one-sided Hole: cylindrical hole + single-sided countersink (40°–60°) Relief angle: 7° Plate shape: triangular Application: turning (external and internal) System components: ISO insert, holder/boring bar, shim/clamp set, replacement screws FAQ Which materials are suitable for this insert? The TCMT110302 AH725 insert from Tungaloy is specified as a universal, breakout‑resistant grade suitable for machining steel and stainless steels, making it suitable for mixed material batches in turning operations. How is holder compatibility determined for triangular inserts? Compatibility depends on the insert form, relief angle (7°), tolerance class, fastening arrangement, size and thickness; ensure the holder accepts 60° triangular ISO inserts and the insert seats securely using the cylindrical hole and countersink. What benefit does the 0.2 mm corner radius provide? A 0.2 mm corner radius gives improved surface finish and reduced vibration on light to medium cuts, while maintaining adequate edge strength for repeatable dimensional control. When should the one‑sided chipbreaker be chosen? A one‑sided chipbreaker is effective for general turning where stable chip formation is needed; select the chipbreaker and grade based on workpiece material, depth of cut and machine/fixture stability. Can this insert be used for internal turning? Yes, the ISO triangular geometry and secure clamping option allow the insert to be used in suitable boring bars for internal turning, as well as in traditional external turning holders. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCMT 110302 AH8015 Wendeplatten - Tungaloy
Reliable machining of heat‑resistant alloys is enabled by the PVD‑coated AH8015 grade and the 0.2 mm corner radius, delivering a balance of wear resistance and edge stability; order the insert directly via Metav Werkzeuge or consult their application specialists for optimal holder selection. TCMT110302 AH8015 ISO triangular insert for turning — Tungaloy A TCMT110302 AH8015 indexable turning insert for external and internal turning, ISO‑standard triangular geometry with a 60° included angle and 7° clearance ISO triangular insert TCMT110302 PVD-coated carbide grade AH8015 0.2 mm corner radius for fine finishes Cylindrical hole with 40°–60° countersink Consistent performance on heat‑resistant alloys The combination of PVD-coated surface treatment and a robust carbide substrate makes this insert particularly suitable for the general machining of heat‑resistant alloys. The coating reduces thermal and abrasive wear, extending tool life and enabling stable cutting under elevated temperatures. With an included angle of 60° and a 0.2 mm corner radius, the geometry supports precise finishing passes while preserving edge integrity, resulting in consistent surface quality and fewer interruptions in production. Secure clamping and ISO compatibility for predictable set‑ups Compliance with ISO standards ensures straightforward matching to appropriate toolholders; compatibility is determined by form, clearance angle, tolerance class, fastening method, size and thickness. The insert’s cylindrical hole with single‑side countersink (40°–60°) provides reliable seating and repeatable clamping, reducing vibration and improving process stability. Documentation and correct holder selection are important for predictable results during both external and internal turning. Practical chip control and system integration for efficient turning A single-sided chipbreaker is provided to aid chip formation suited to the selected material and cutting conditions, helping to avoid long, tangled chips and promoting safe, automated machining. As part of the ISO indexable insert system, the cutting edge is combined with a suitable external holder or boring bar, underlay/shim and clamping set plus replacement screws to form a complete, serviceable tool assembly. The overall design emphasises process reliability and a productive balance between wear resistance and edge stability for everyday workshop use. For reliable turning with the AH8015 PVD‑coated insert or to check holder compatibility, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for ordering and application advice. Technical data Article number: 6951442 SKU: 6951442-Tungaloy Manufacturer SKU: TUN6951442 Designation: TCMT110302 AH8015 Label: TCMT110302 AH8015 Tungaloy-Wendeplatte Core technical data Insert size: 11 mm Thickness: 3.18 mm Corner radius: 0.2 mm Included angle: 60° Clearance angle: 7° Special features Material: carbide Coating / grade: PVD-coated, AH8015 Chipbreaker: single-sided Hole: cylindrical with single-side countersink (40°–60°) Shape: triangular Application: turning System components: insert, holder, shim/clamping set, replacement screws FAQ What materials is this insert best suited for? The TCMT110302 AH8015 insert from Tungaloy is a first choice for general machining of heat‑resistant alloys, offering a balanced combination of wear resistance and edge stability due to the PVD‑coated carbide grade AH8015. How is compatibility with toolholders determined? Compatibility depends on the holder’s form, clearance angle, tolerance class, fastening method, size and thickness; the TCMT110302 AH8015 follows ISO norms so selection of an ISO‑compliant holder ensures correct fit. What is the corner radius and what finish can be expected? The insert has a 0.2 mm corner radius, which supports fine finishing passes and helps achieve consistent surface quality when used with appropriate cutting parameters and machine rigidity. How does the insert secure to the holder? The insert features a cylindrical hole with a single‑side countersink (40°–60°) for reliable seating; it is used together with an underlay or clamping set and the corresponding screws as part of the ISO indexable system. How does the chipbreaker affect machining? The single‑sided chipbreaker on this insert improves chip formation for turning operations, promoting manageable chip flow and contributing to process reliability and safer automated production. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCMT 110302 AH8015 Wendeplatten - Tungaloy
Take advantage of the combination of PVD-coated carbide AH8015 for heat-resistant alloys, a 60° triangular form and precise geometry to ensure reliable tool life and consistent surface finish; order directly via Metav Werkzeuge or consult our specialists for application-specific recommendations. TCMT 110302 AH8015 indexable turning insert — Tungaloy TCMT110302 AH8015 is an ISO-design indexable insert for turning, engineered for the general machining of heat‑resistant alloys and demanding production environments PVD-coated carbide AH8015 Suited for heat-resistant alloys Triangular 60° form, 0.2 mm radius One-sided chipbreaker, with hole Precision performance for heat‑resistant materials The PVD-coated carbide grade AH8015 delivers a balanced combination of wear resistance and edge stability, making it a practical choice for continuous turning of heat‑resistant alloys. The coating reduces built-up edge and improves thermal tolerance, resulting in more predictable tool life and fewer interruptions. By selecting a grade optimised for elevated cutting temperatures, production engineers achieve a lower cost per component through extended insert service life and reduced frequency of changes. Consistent geometry for safe clamping and interchangeability Manufactured to ISO dimensions, the insert’s triangular 60° form and standardised hole and countersink ensure reliable seating in compatible holders. The insert has a 0.2 mm corner radius and a 7° clearance angle, while the plate thickness is 3.18 mm, all of which contribute to repeatable positioning and stable cutting forces. Standardisation simplifies inventory management and reduces set‑up time, since compatible toolholders can be selected based on form, clearance, tolerance class and thickness. Predictable chip control and surface quality The integrated one‑sided chipbreaker is designed to promote consistent chip formation on common turning operations, improving evacuation and reducing the risk of re-cutting. The small corner radius supports fine detail and helps achieve the required surface finish without sacrificing tool strength. Combined, the geometry and chip‑control features enable stable machining at higher material removal rates while maintaining component tolerances. Practical benefits in the production chain Using this ISO‑format indexable insert reduces preparation overhead: compatible assemblies require only a matching external holder or boring bar, a clamping set and replacement screws. The standardised dimensions make tool qualification straightforward and support rapid tool changeover in multi‑shift production. For workshops handling a variety of alloys, the AH8015 grade represents a versatile option that balances longevity and edge security, reducing the total number of specialised grades needed in the tool crib. Contact Metav Werkzeuge for tailored machining data and order support for Tungaloy AH8015 inserts; email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss the best grade and holder combination for the application Technical data Article number: 6951393 SKU: 6951393-Tungaloy Manufacturer SKU: TUN6951393 Model series: ISO‑turning indexable inserts ISO designation: TCMT110302 Dimensions & angles Corner radius: 0.2 mm Included angle: 60° Clearance angle: 7° Plate thickness: 3.18 mm Size: 11 mm Special features Material: carbide Coating: PVD‑coated Plate form: triangular Hole: with hole; cylindrical + single‑side countersink (40°–60°) Chipbreaker: one‑sided Typical application: external and internal turning; choose chipbreaker and grade according to material and stability FAQ What materials is this insert suitable for? The TCMT110302 AH8015 indexable insert from Tungaloy (SKU 6951393-Tungaloy) is intended primarily for the general machining of heat‑resistant alloys and performs well where thermal stability and balanced wear resistance are required. How does the AH8015 grade affect tool life? The AH8015 PVD‑coated carbide balances wear resistance and edge stability, which extends usable life under elevated temperatures compared with uncoated grades, delivering more consistent component quality. Which holder features are needed for proper seating? Compatibility depends on form, clearance angle, tolerance class, fastening method, size and thickness; the TCMT110302 geometry and with‑hole design require a matching ISO‑type triangular holder and appropriate clamping screws. Can this insert be used for finishing operations? Yes — with its 0.2 mm corner radius and controlled chip formation, the insert supports fine finishing passes while maintaining edge robustness suitable for semi‑finishing as well. How does the chipbreaker affect machining? The one‑sided chipbreaker is designed to promote consistent chip flow and easier evacuation, which helps reduce re‑cutting and improves surface integrity in many turning conditions. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
TCMT 110302 AH8015 Wendeplatten - Tungaloy
Take advantage of the balanced combination of PVD-coated cemented carbide and a precise 0.2 mm corner radius for productive, consistent turning of heat-resistant alloys; request tailored advice or order the insert directly via Metav Werkzeuge if support is required. TCMT 110302 AH8015 indexable turning insert by Tungaloy — PVD-coated cemented carbide, 60° triangle A TCMT110302 AH8015 indexable insert designed for ISO-compatible external and internal turning of heat-resistant alloys, offering a stable cutting edge and controlled chip formation *PVD-coated cemented carbide AH8015 *ISO triangular TCMT 110302, 60° included angle *0.2 mm corner radius for fine turning *One-sided chipbreaker with cylindrical hole Increased productivity on heat-resistant alloys The combination of a PVD coating with a cemented carbide substrate makes this insert well suited to the general machining of heat-resistant alloys. The AH8015 grade is balanced between wear resistance and edge stability, so tool life and process reliability improve in demanding operations. This benefit translates into longer productive cycles and fewer index changes, supporting a smoother machining flow for series and batch production. The PVD layer reduces flank wear and helps maintain a consistent cutting geometry under elevated temperatures. Geometry that delivers repeatable surface quality The triangular form with a 60° included angle and a 0.2 mm corner radius provides a predictable contact geometry, which helps achieve uniform surface finish and dimensional stability. The insert’s 3.18 mm thickness contributes to rigidity at the cutting edge, while the 7° free clearance reduces rubbing and heat transfer to the workpiece. The central cylindrical hole with a single-sided countersink (40°–60°) ensures reliable clamping and straightforward seating in ISO-compatible holders. For users replacing inserts, the ISO designation and standardised dimensions simplify inventory and reduce setup time. System-level advantages and economical handling This insert is intended as part of a complete system: ISO indexable plate, matching external holder or boring bar, and the required clamping set and screws. The one-sided chipbreaker supports efficient chip control when machining less ductile or work-hardened alloys, reducing the risk of built-up edge and chatter. Using a standardised insert like this improves tool-change speed and enables consistent process parameters across multiple machines. The resulting reduction in downtime and scrap contributes to measurable cost-effectiveness in the production cycle. Contact Metav Werkzeuge for application-specific recommendations, stock availability and ordering: info@metav-werkzeuge.com • +49 2822 7131930 — experts are available to advise on holder compatibility and process optimisation Technical data Article number: 6947706 SKU: 6947706-Tungaloy Manufacturer SKU: TUN6947706 Manufacturer: Tungaloy Facts ISO designation: 110302 Insert size: 11 mm Thickness: 3.18 mm Corner radius: 0.2 mm Included angle: 60° Free clearance: 7° Special features Grade: AH8015 Substrate: PVD-coated cemented carbide Shape: triangular Hole: with cylindrical hole and single-sided countersink (40°–60°) Chipbreaker: one-sided Application: turning Model series: ISO indexable turning inserts FAQ Is this insert suitable for finishing operations on heat-resistant alloys? Yes. The AH8015 grade with a PVD coating is developed for general machining of heat-resistant alloys and offers a compromise between wear resistance and edge stability suitable for finishing when parameters are optimised. Which holders are compatible with the TCMT110302 geometry? Compatibility depends on the holder’s seat form, clamping method, size and tolerance class; the ISO designation TCMT 110302 ensures fit with standard ISO triangular external holders and boring bars designed for the same designation. How does the one-sided chipbreaker affect machining performance? The one-sided chipbreaker on this insert promotes controlled chip formation for certain feed and depth ranges, reducing the likelihood of long, stringy chips and improving process stability during turning. Can the insert handle interrupted cuts or unstable setups? The 3.18 mm thickness and triangular 60° form provide mechanical robustness; however, stability in interrupted cuts also depends on the holder, clamping and machine rigidity. Adjusting cutting data and using a suitable holder is recommended. What are the benefits of the AH8015 grade compared with uncoated grades? AH8015’s PVD coating enhances wear resistance at elevated temperatures and preserves edge integrity better than comparable uncoated grades, which can extend life and reduce frequency of index changes for many applications. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCMT 110302 DX120 Wendeplatten - Tungaloy
Take advantage of the combination of high cutting speed and exceptional tool life provided by the DX120 PCD grade, together with ISO compatibility for predictable tool changes; order directly via Metav Werkzeuge or request application advice from our consultants. TCMT 110302 DX120 turning insert (PCD), triangle 60° — Tungaloy TCMT 110302 DX120 is an ISO‑standard turning insert engineered for high‑speed machining of aluminium, non‑ferrous metals and abrasive non‑metals Polycrystalline diamond DX120 grade Suited for aluminium and non‑ferrous alloys Triangle 60° geometry, 0.2 mm nose radius ISO‑standard TCMT form, hole with countersink High productivity through PCD technology The polycrystalline diamond (PCD) cutting material DX120 delivers very high cutting speeds and significantly extended tool life when machining non‑ferrous materials. PCD consists of micron‑sized diamond particles sintered to a substrate, which creates an extremely hard and wear‑resistant cutting edge. For workshops seeking faster cycle times and fewer indexings, this grade reduces downtime and delivers more consistent throughput without frequent regrinding or replacement. The result is improved process efficiency and lower cost per component. Reliable fit and secure clamping for steady machining Designed as an ISO‑standard TCMT110302 insert, the geometry and tolerance class ensure compatibility with common external holders and boring bars. The insert features a 7° relief angle, a nominal thickness of 3.18 mm and an 11 mm triangle size, while the central hole is a cylindrical hole with a single‑side countersink (40°–60°) for stable screw fixation. This mechanical interface gives repeatable seating and reduced vibration, which in turn supports dimensional stability and longer tool life in production environments. Fine finishing with a small nose radius A 0.2 mm nose radius provides a balance between edge strength and the ability to achieve fine surface finishes. The small radius helps to maintain profile accuracy and is particularly suitable for finishing passes or components with tight tolerance features. Because the cutting edge is formed from PCD, the insert also resists built‑up edge and abrasive wear, contributing to consistent surface quality over extended tool life. Choosing the correct nose radius and feed rates will optimise results for each application. System approach and recommended applications The insert is intended for turning operations and is best used as part of a complete tool system: insert, compatible external holder or boring bar, shim/clamping set and replacement screws. The single‑sided chipbreaker and the DX120 grade are tailored to aluminium, other non‑ferrous metals and abrasive non‑metallic materials; select the chipbreaker style and holder rigidity according to workpiece stability and machining strategy. For internal and external turning, the structured PCD edge enables long‑run production with predictable performance and reduced intervention. For PCD turning applications with Tungaloy DX120 grade, contact Metav Werkzeuge for tailored recommendations and fast delivery via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: 6822167-Tungaloy Manufacturer SKU: TUN6822167 Manufacturer article number: 6822167 Model series: ISO‑Drehwendeschneidplatten Substrate material: cemented carbide Core specifications Insert designation: TCMT110302 Insert shape: triangle, 60° Insert size: 11 mm Thickness: 3.18 mm Nose radius: 0.2 mm Relief angle: 7° Design features Cutting material: polycrystalline diamond (PCD) DX120 Chipbreaker: one‑sided Hole: cylindrical hole with single‑side countersink (40°–60°) Application: turning (external and internal) Suitable for: aluminium, non‑ferrous metals, abrasive non‑metals ISO‑standard form for holder compatibility FAQ Which materials is this insert best suited for? The TCMT 110302 DX120 insert uses PCD DX120, which is optimised for aluminium, non‑ferrous metals and abrasive non‑metallic materials, providing high speeds and long tool life. Is the insert compatible with common TCMT toolholders? Yes. The TCMT110302 form and its specified relief angle, thickness and hole geometry are ISO‑standardised for compatibility with corresponding holders and boring bars when the holder matches the insert form. What surface finish can be expected with a 0.2 mm nose radius? A 0.2 mm nose radius on the TCMT insert supports fine finishing passes and accurate profiles; the PCD edge helps maintain consistent surface quality over extended production runs. Does the insert require a special clamp or screw? The insert uses a cylindrical hole with a single‑side countersink (40°–60°) and is intended to be mounted with the appropriate screw and shim/clamping set as specified by the holder manufacturer. Can this insert be used for roughing operations? While the DX120 PCD grade excels in high‑speed and long‑life scenarios, selection of chipbreaker and machining parameters should be matched to the workpiece stability and the required metal removal rate to determine suitability for roughing. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
TCMT 110302 NS9530 Wendeplatten - Tungaloy
Reliable finishing performance with a sharp cutting edge and low cutting forces makes this insert a practical choice for precision turning. Benefit from ISO conformity and secure clamping to maintain consistent part quality; order via Metav Werkzeuge or consult our advisors for application support. TCMT 110302 NS9530 — ISO triangular turning insert for finishing by Tungaloy TCMT 110302 NS9530 is an ISO-design insert for precision turning, designed primarily for finishing operations on Stahl with continuous cuts and small depths of cut. ISO 110302 triangular geometry Uncoated cermet grade NS9530 Sharp cutting edge for fine surface finish Through-hole with countersink for secure clamping High-precision finishing thanks to uncoated cermet technology The TCMT110302 NS9530 insert is manufactured as an uncoated cermet grade that prioritises a very sharp cutting edge and reduced cutting forces. In practical terms, this results in measurably improved surface finishes and lower tendency for built-up edge during continuous finishing passes. The composition of the cermet provides a balance between hardness and toughness, yielding consistent dimensional results on Stahl when small depths of cut are used. The primary benefit here is improved part appearance and reduced need for secondary finishing. Secure mounting and ISO-based compatibility for repeatable results Compatibility with a toolholder depends on form, relief, tolerance class, fastening method, size and thickness; the insert follows the ISO 110302 form to ensure broad holder compatibility. The triangular plate and the through-hole with a cylindrical hole plus one-sided countersink (40°–60°) allow a dependable clamping interface that limits vibration and runout. With a 3.18 mm thickness and a 7° clearance, the geometry supports stable cutting at finishing feeds. Choosing the correct seating and torque reduces micro-movements, which translates into more repeatable cycles and longer interval times between indexings. Application guidance and performance benefits in everyday machining For finishing on Stahl, select the NS9530 grade and a matching single-sided chipbreaker to suit machine rigidity and workpiece stability; the small 0.2 mm corner radius delivers crisp profile fidelity for fine-detail work. Cermet’s inherent wear characteristics favour excellent surface finish over long runs, particularly in continuous cuts with small material removals. The insert’s design works best when paired with an appropriate external holder or boring bar and when cutting parameters are tuned for finishing—moderate speeds with light depth of cut—so that the combination of insert geometry and workpiece stability yields the intended quality improvement. For precision finishing solutions, order the original Tungaloy TCMT 110302 NS9530 through Metav Werkzeuge or contact our technical advisors at info@metav-werkzeuge.com or +49 2822 7131930 to confirm suitability for specific applications Technical Data Article number: 6951397 Manufacturer article number: 6951397 Manufacturer SKU: TUN6951397 SKU: 6951397-Tungaloy Model series: ISO-Drehwendeschneidplatten Material: Hartmetall Grade: NS9530 Numbers / Core data Size: 11 mm Thickness: 3.18 mm Corner radius: 0.2 mm Clearance angle: 7° Cutting angle: 60° Special features ISO designation: TCMT110302 Plate shape: triangular Hole: with hole — cylindrical hole + one-sided countersink (40°–60°) Chipbreaker: single-sided Cutting material: uncoated cermet (NS9530) Typical application: Turning (finishing) FAQ What materials is this insert best suited for? The TCMT 110302 NS9530 insert is designed as a finishing grade for Stahl, delivering low cutting forces and high surface quality in continuous cutting operations. How does the NS9530 cermet differ from standard carbide? NS9530 cermet focuses on a very sharp edge and fine surface finish; compared with standard carbide, it often produces superior finishes in finishing passes and performs well at the light depths of cut typical for precision turning. Which holders are compatible with this insert? Compatibility follows the ISO form: holders matching the ISO 110302 profile, correct relief angle and clamping method will be compatible. The through-hole with countersink secures reliable clamping. What cutting conditions are recommended for this insert? Use moderate cutting speeds with light depths of cut for finishing on Stahl, and select the chipbreaker that matches the workpiece stability and machining type to maintain the sharp edge and surface quality. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCMT 110302 NS9530 Wendeplatten - Tungaloy
Take advantage of a finish-focused cermet grade and precise geometry for consistent, high-quality turning results; the combination of a sharp cutting edge and low cutting forces supports superior surface finish and prolonged tool life. Order the insert directly via Metav Werkzeuge or consult our technical team for application guidance. TCMT 110302 NS9530 Tungaloy turning insert — triangle, 60° The TCMT110302 NS9530 Tungaloy insert is a triangular ISO turning insert engineered for fine finishing of steel with a sharp, uncoated cermet grade and a single-sided chipbreaker. Cermet grade NS9530 for fine finishing 0.2 mm corner radius for superior surface 7° clearance angle and 60° triangle form Cylindrical hole with 40°–60° countersink Achieve consistent finishing quality with a sharp cermet grade The uncoated cermet NS9530 provides a sharp cutting edge that reduces cutting forces during continuous cuts and small depths of cut. This results in a measurable improvement in surface integrity when finishing steel components. Cermet materials combine ceramic hardness with metallic toughness, which explains the low tendency to build up edge material and the ability to produce fine surface textures. The design supports repeatable results on stable turning setups, helping to reduce downstream polishing and rework. Geometry designed for dependable chip control and accuracy A 0.2 mm corner radius together with the single-sided chipbreaker delivers a balance between edge strength and surface finish: the small radius helps create fine profiles, while the chipbreaker manages swarf evacuation in typical finishing conditions. The insert’s 60° included angle and 7° relief angle optimise cutting engagement and maintain a predictable cutting edge position relative to the toolholder, which simplifies process planning and minimises dimensional deviation on completed parts. ISO compatibility and secure clamping for production environments This triangular insert conforms to the ISO designation 110302, ensuring compatibility with standard external holders when matching form, relief angle, tolerance class, fastening method, size and thickness. The cylindrical hole with a single-sided countersink (40°–60°) provides stable mechanical location and repeatable clamping, reducing motion at the cutting zone and supporting consistent tool life across batches. Specifying ISO-compliant inserts streamlines tool procurement and keeps changeovers straightforward in serial production. Practical benefits for workshop workflows With a 3.18 mm thickness and an 11 mm size, the insert offers sufficient rigidity for finishing tasks while remaining economical to stock. The combination of the cermet grade’s wear resistance and the insert geometry helps extend indexable life in continuous finishing operations, thereby lowering tool consumption and supporting productive machining cycles. Clear technical parameters also make it easier to document setups and transfer successful parameters between machines or shifts. For application-specific advice on Tungaloy finishing inserts and availability, contact Metav Werkzeuge for immediate technical consultation and stock information: info@metav-werkzeuge.com • +49 2822 7131930 Technical data Article number: 6951444 SKU: 6951444-Tungaloy Manufacturer SKU: TUN6951444 Model series: ISO-Drehwendeschneidplatten Material: uncoated cermet (NS9530) Application: Turning Facts Corner radius: 0.2 mm Thickness: 3.18 mm Size: 11 mm Included angle: 60° Clearance angle: 7° Countersink angle: 40°–60° Special features ISO designation: TCMT110302 (110302) Triangular insert form Single-sided chipbreaker Cylindrical hole with one-sided countersink Fine finishing grade for steel Sharp cutting edge and low cutting forces FAQ What materials is this insert suited for? The TCMT110302 NS9530 Tungaloy insert is designed primarily for finishing operations on steel, with a cermet composition optimised for continuous cuts and small depths of cut. How does the 0.2 mm radius affect surface finish? A 0.2 mm corner radius on the insert reduces surface irregularities and supports higher surface finish quality when using the TCMT110302 NS9530 grade in finishing passes. Is the insert compatible with standard ISO holders? Yes, the TCMT110302 follows ISO geometry and is compatible with holders that match the form, relief angle, tolerance class, fastening method, size and thickness specified for this designation. What is the purpose of the cylindrical hole and countersink? The cylindrical hole with a single-sided countersink (40°–60°) on the insert ensures secure axial and rotational location in the toolholder, improving clamping repeatability and machining stability. Which cutting conditions are recommended for this grade? The NS9530 cermet grade is recommended for finishing strategies on steel where lower cutting forces and high surface quality are priorities; select feed and depth of cut consistent with small finishing passes to exploit the grade’s properties. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCMT 110302 NS9530 Wendeplatten - Tungaloy
Data inconsistency detected: the entry lists cemented carbide as the tool material while also specifying an uncoated cermet cutting grade (NS9530). These indicate different substrate types and create a contradiction, as cemented carbide and uncoated cermet are distinct materials with unique properties, applications, and performance characteristics in machining operations. This discrepancy raises questions about the intended use and compatibility of the tool, potentially leading to confusion or errors in selection. A full product description cannot be generated until the material information is clarified, as accurate and consistent data is essential for ensuring proper functionality, reliability, and suitability for the specified machining tasks.
TCMT 110302 T6215 Wendeplatten - Tungaloy
Take advantage of the CVD-coated T6215 grade and the precise 0.2 mm nose radius for consistent performance when turning rostfreier Stahl; reliable chip control and ISO-compatibility reduce setup time and support steady production. Order the insert directly via Metav Werkzeuge or contact our consultants for application advice. TCMT 110302 T6215 triangular indexable insert — for Turning, Tungaloy (CVD-coated carbide, 7° clearance) TCMT 110302 T6215 is a triangular ISO indexable insert designed for turning applications, optimised for stable to light interrupted cuts in rostfreier Stahl. CVD-coated carbide for wear resistance Designed for rostfreier Stahl turning Triangular 11 size with 0.2 mm nose radius Central hole with 40°–60° countersink Enhanced wear resistance for longer tool life The CVD coating of this grade delivers elevated wear resistance, which translates directly into longer intervals between indexings and lower tooling costs per part. The T6215 coating is formulated for demanding applications in rostfreier Stahl, where adhesion and built-up edge are common challenges; the coating reduces flank wear while preserving the substrate’s toughness. By selecting a coated carbide with a stable cutting edge, processors benefit from fewer rejects and more predictable tool-change intervals in routine production. Geometry tailored for predictable chip control A compact 0.2 mm nose radius and an integrated one-sided chipbreaker provide controlled chip formation under typical turning conditions. The modest nose radius helps maintain dimensional accuracy on diameters and shoulders, while the chipbreaker promotes short, manageable chips when cutting rostfreier Stahl. Explaining the terms: a nose radius influences surface finish and strength at the cutting edge, and a chipbreaker guides the chip curl to prevent entanglement, improving process stability and finishing consistency. ISO compatibility and secure mounting reduce setup time The insert conforms to ISO specifications for triangular turning plates and features a cylindrical central hole with a single-side countersink (40°–60°) for secure clamping. This design ensures compatibility with many standard external holders and boring bars, so changeovers are straightforward and rigid clamping is achieved without additional adapters. The plate thickness of 3.18 mm and the nominal size designation support consistent seat fitment and reliable repeatability across tool assemblies. Stable performance under interrupted cuts and varied workpiece types Chosen for stable to lightly interrupted operations, the grade combines a tough carbide substrate with the CVD finish to withstand thermal and mechanical stresses common in turning rostfreier Stahl. The insert’s construction balances edge strength and wear resistance, which is particularly important when batches include features that create intermittent engagement. This stability helps maintain productivity and reduces the likelihood of unexpected tool failures during series production. Practical advantages for production workflows Using a standard ISO plate such as this simplifies inventory management and reduces the need for specialised inserts for every operation. The triangular form offers three indexing positions per plate, extending usable life and offering cost efficiency. In addition, the visible grade marking and established geometries support quick selection for recurring tasks, while the Tungaloy manufacturing quality contributes to predictable performance in day-to-day turning operations. Contact Metav Werkzeuge for application-specific recommendations on Tungaloy inserts and to determine the optimal holder and cutting parameters for rostfreier Stahl turning — reach out via info@metav-werkzeuge.com or call +49 2822 7131930. Technical data Article number: 6903124 SKU: 6903124-Tungaloy Manufacturer SKU: TUN6903124 Model series: ISO-Drehwendeschneidplatten Designation: TCMT110302 T6215 Tungaloy-Wendeplatte Facts Geometry angle: 60° Clearance (relief): 7° Corner radius: 0.2 mm Plate thickness: 3.18 mm Size: 11 (triangular designation) Hole style: cylindrical hole + single-side countersink (40°–60°) Special features Material: carbide Coating: T6215 (CVD-coated) Chipbreaker: one-sided Application: turning (Drehen), external and internal operations Compatibility: ISO-indexable turning holders and boring bars Typical use: stable to lightly interrupted cuts in rostfreier Stahl FAQ What materials is this insert best suited for? The TCMT110302 T6215 insert is optimised for rostfreier Stahl, combining a robust carbide substrate with a CVD coating suited to the thermal and adhesive demands of stainless applications. How is the insert mounted in a holder? Mounting is by a central screw through the cylindrical hole with a 40°–60° countersink; the ISO geometry ensures a secure fit in compatible triangular-indexable holders. How many cutting edges are available per insert? The triangular form offers three usable cutting positions per insert, providing an efficient balance between edge life and replacement frequency. Can this insert handle interrupted cuts? Yes — the T6215 grade is intended for stable to lightly interrupted turning conditions and is designed to maintain edge stability under such loads. What is the significance of the 0.2 mm radius? A 0.2 mm nose radius supports fine surface finishes and accurate profile control while retaining sufficient edge strength for general turning tasks in rostfreier Stahl. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCMT 110302 T6215 Wendeplatten - Tungaloy
High wear resistance and consistent edge stability make this insert a cost-effective choice for turning rostfreier Stahl. The CVD-coated carbide grade offers reliable performance under stable to mildly interrupted cuts, while the ISO triangular form with a 0.2 mm radius delivers precise finishes and predictable tool life. Order the insert directly via Metav Werkzeuge or consult our advisors for application guidance. TCMT110302 T6215 TCMT indexable turning insert — CVD-coated carbide for turning, Tungaloy The TCMT110302 T6215 is an ISO triangular indexable insert designed for external and internal turning of rostfreier Stahl under stable to slightly interrupted cutting conditions. CVD-coated carbide for wear resistance Optimised for rostfreier Stahl turning Triangular 60° form with 0.2 mm radius Precision performance for consistent production The grade combines a CVD coating with a robust carbide substrate to provide improved abrasive wear resistance and edge stability during continuous turning. This construction reduces the tendency for built-up edge when machining rostfreier Stahl, resulting in more consistent surface finish and extended tool life. The result is a reliable cutting edge that supports steady cycle times and predictable reconditioning intervals, helping to keep production flows efficient. Designed for secure clamping and wide holder compatibility As an ISO-standard triangular insert, the geometry—a 60° triangle with a 0.2 mm corner radius and 3.18 mm thickness—fits a broad range of external holders and boring bars. The insert features a central hole with a cylindrical hole plus single-sided countersink (40°–60°) which provides positive, repeatable clamping. Compatibility depends on holder form, clearance angle, tolerance class, attachment method, size and thickness; this standardisation helps to simplify tooling logistics and reduces setup uncertainty on the shop floor. Chip control and practical advice for application The one-sided chipbreaker is intended to give dependable chip formation when paired with suitable feeds and stable machining conditions. Select the chipbreaker style and grade to match part rigidity and cutting parameters; in many rostfreier Stahl operations the combination of moderate feed, stable clamping and the CVD-coated grade yields the best balance of surface quality and tool life. For shops seeking predictable results, this insert supports repeatable finishes and lowers the risk of process-related rejects. For applications requiring robust performance in rostfreier Stahl turning, choose the Tungaloy T6215 CVD-coated grade and contact Metav Werkzeuge for tailored recommendations and supply via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6903114 Manufacturer SKU: TUN6903114 SKU: 6903114-Tungaloy Brand: Tungaloy Designation: TCMT110302 T6215 indexable turning insert Facts Insert angle: 60° Corner radius: 0.2 mm Clearance angle: 7° Thickness: 3.18 mm Inscribed circle / size: 11 mm ISO code: 110302 Hole: with hole (cylindrical + single-sided countersink 40°–60°) Special features CVD-coated carbide grade T6215 One-sided chipbreaker Triangular insert form ISO-standard turning insert for external and internal turning Suited for rostfreier Stahl under stable to slightly interrupted conditions Compatibility determined by form, clearance angle, tolerance class, attachment, size and thickness FAQ What materials is this insert designed for? This insert is specified for machining rostfreier Stahl; the Tungaloy TCMT110302 T6215 grade is optimised for stainless-steel turning under stable to mildly interrupted conditions. What are the key geometry details of the insert? The TCMT110302 features a triangular 60° form, a 0.2 mm corner radius, a thickness of 3.18 mm and an insert size of 11 mm, with a central cylindrical hole plus a single-sided countersink (40°–60°). How does the chip control perform in practice? The one-sided chipbreaker provides controlled chip formation when matched to appropriate feeds and workpiece stability, improving surface finish and reducing the chance of irregular chips during rostfreier Stahl turning. Will this insert fit standard holders? As an ISO-standard insert, compatibility depends on holder form, clearance angle (7°), tolerance class, attachment method, size and thickness; matching these parameters ensures secure clamping and correct seating. Can this insert be indexed to use multiple cutting edges? Yes, the TCMT-style indexable insert is intended for indexing; rotating to a fresh cutting edge is a standard practice to maximise tool usage and reduce tooling costs. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCMT 110302 T6215 Wendeplatten - Tungaloy
Take advantage of the CVD-coated carbide grade and precise 60° geometry to maintain stable cutting when turning stainless steels; order the insert through Metav Werkzeuge or request application advice from our consultants. TCMT 110302 T6215 — Indexable Turning Insert (Turning) by Tungaloy The TCMT 110302 T6215 is a triangular ISO indexable insert designed for general turning, offering a wear-resistant CVD-coated carbide grade suited to stable and lightly interrupted stainless-steel machining. CVD-coated carbide grade T6215 Triangular insert, 60° cutting angle 0.2 mm corner radius for fine profiles Cylindrical hole with one-sided countersink 3.18 mm thickness for secure clamping Consistent cutting performance for stainless-steel turning The CVD-coated carbide grade provides a balanced combination of wear resistance and edge stability, which translates into longer tool life and fewer insert changes in production. The 60° geometry and 0.2 mm corner radius offer predictable engagement, making the insert particularly effective for finishing and light to medium turning of stainless steels. Explaining briefly: CVD coating reduces abrasive wear and built-up edge formation on tough alloys, while the solid carbide substrate maintains cutting-edge integrity under thermal and mechanical load. Secure clamping and simple compatibility check Compatibility with a toolholder depends on form, relief angle, tolerance class, fixing method, size and thickness; this insert’s triangular shape and 3.18 mm thickness fit standard ISO indexable turning systems. The cylindrical hole with one-sided countersink (40°–60°) ensures firm seating in most ISO-compatible holders when paired with the correct clamp and screw set. Selecting the correct holder and clamping set improves repeatability and reduces vibration, thereby enhancing surface finish and dimensional consistency. Productivity through the right chip control and grade choice Equipped with a single-sided chipbreaker, the insert helps control chip flow during turning operations, which is especially valuable when machining long or difficult-to-handle stainless-steel components. The T6215 grade is optimised for stable to slightly interrupted cuts; choosing this grade reduces unplanned tool changes and contributes to a more economical machining cycle. For operators evaluating process windows, the combination of CVD-coated carbide and a tailored chipbreaker provides a practical balance between productivity and surface quality. Practical advantages for shop-floor use Using an ISO-standard insert streamlines inventory management across multi-machine shops: spare inserts, screws and clamps are interchangeable within the same ISO family when size and tolerance match. The compact corner radius and clear geometric data simplify CAM and process setting, reducing setup times and scrap risk. If further machining parameters are required, the available grade data helps calculate cutting speeds and feeds to suit material hardness and fixture stability. Contact Metav Werkzeuge for tailored recommendations on Tungaloy TCMT 110302 T6215 inserts and for rapid supply; email info@metav-werkzeuge.com or call +49 2822 7131930 for application support and ordering. Technical Data Article number: 6951388 SKU: 6951388-Tungaloy Manufacturer SKU: TUN6951388 Designation: TCMT110302 T6215 Tungaloy insert Material: carbide Shape: triangular Hole style: cylindrical hole + one-sided countersink (40°–60°) Facts Cutting angle: 60° Corner radius: 0.2 mm Thickness: 3.18 mm Size: 11 mm Relief angle: 7° ISO code: 110302 Special features CVD-coated grade T6215 Single-sided chipbreaker Intended application: turning of stainless steels under stable to lightly interrupted conditions ISO indexable turning insert family FAQ What materials is this insert suitable for? The TCMT110302 T6215 insert is specified for machining stainless steels and performs best under stable to slightly interrupted turning conditions. How is compatibility with toolholders determined? Compatibility depends on insert form, relief angle, tolerance class, fixing method, size and thickness; ensure the holder matches the TCMT110302 dimensions and the 3.18 mm plate thickness. What does the T6215 grade offer compared with other grades? T6215 is a CVD-coated carbide grade developed for wear resistance and edge stability when turning stainless steels, providing extended tool life and improved surface quality. Which chip control can be expected from this insert? The single-sided chipbreaker directs chips predictably for typical turning tasks, aiding in chip evacuation and reducing handling issues on the shop floor. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCMT 110302 T6215 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide durability, precise ISO conformity and easy holder compatibility for consistent turning performance; order the TCMT110302 T6215 insert directly via Metav Werkzeuge or request advice from our consultants. TCMT 110302 T6215 Turning Insert by Tungaloy — CVD-coated carbide, triangular ISO insert The TCMT110302 T6215 is an ISO‑standard triangular indexable insert engineered for external and internal turning of stainless steels under stable to lightly interrupted cutting conditions. CVD‑coated carbide grade T6215 Triangular form with 7° clearance 0.2 mm corner radius for fine finishing Cylindrical hole with 40°–60° countersink High wear resistance for consistent machining results The CVD‑coated T6215 grade delivers a wear‑resistant cutting edge optimised for turning of stainless steel, supporting longer tool life and stable chip formation in steady or slightly interrupted cuts. The combination of a robust CVD coating and a carbide substrate reduces flank wear and helps maintain dimensional accuracy over extended production runs. The triangular geometry with a 0.2 mm corner radius and 7° clearance balances strength and surface finish, making the insert suitable where repeatability and component quality are priorities. ISO conformity and straightforward system integration As an ISO‑designated indexable insert, compatibility with clamping systems is determined by form, clearance angle, tolerance class, fixing method, size and thickness. The recommended system comprises the ISO insert, a matching external holder or boring bar, an underlay/clamping set and replacement screws, ensuring safe and repeatable seating. The insert’s 3.18 mm thickness, 11 mm size and cylindrical hole with countersink simplify mounting while the single‑sided chipbreaker guides chip flow for improved process stability. This structured approach supports fast tool changes and reduces machine downtime. Productivity gains and application advice for workshops For machine shops aiming for productive stainless steel turning, the grade’s emphasis on stable chip control and wear resistance supports higher material removal rates within the limits of a stable setup. Selecting the correct chipbreaker and grade according to workpiece material, machining method and fixture stability is essential to unlock the grade’s full potential. The insert’s triangular shape offers multiple indexable positions, while the specified hole and countersink ensure secure clamping. Small adjustments to feed and depth of cut, matched to the holder rigidity, will yield improved surface finish and extended edge life. For reliable turning with Tungaloy’s T6215 grade and expert ordering assistance, contact Metav Werkzeuge: info@metav-werkzeuge.com or +49 2822 7131930 — consultants are available to advise on holder compatibility and application parameters. Technical data Article number: 6951434 SKU: 6951434-Tungaloy Manufacturer SKU: TUN6951434 ISO designation: TCMT110302 Facts Included angle: 60° Corner radius: 0.2 mm Clearance (relief) angle: 7° Plate thickness: 3.18 mm Plate size: 11 Special features CVD‑coated carbide Grade: T6215 (wear‑resistant) Plate form: triangular Hole: with hole — cylindrical hole + one‑side countersink (40°–60°) Chipbreaker: single‑sided Intended application: turning (external and internal) System components: ISO insert, suitable external holder or boring bar, underlay/clamping set and replacement screws FAQ What materials is this insert designed for? The TCMT110302 T6215 insert is designed primarily for machining stainless steels; the T6215 CVD‑coated carbide grade is wear‑resistant for stable cutting in such materials. Is the insert suitable for both external and internal turning? Yes, the ISO‑standard geometry is intended for both external and internal turning operations when matched with the appropriate holder or boring bar. How is compatibility with a toolholder determined? Compatibility depends on the insert form, relief (clearance) angle, tolerance class, fixing method, size and thickness; the system should include an appropriate holder, an underlay/clamping set and replacement screws. What is the purpose of the countersunk hole? The cylindrical hole with a one‑sided countersink (40°–60°) ensures secure clamping and precise seating in compatible toolholders, contributing to repeatable positioning and stable cutting forces. Which features help achieve a good surface finish? The combination of a 0.2 mm corner radius, 7° clearance and the T6215 CVD coating supports fine finishing and consistent edge condition when cutting parameters and workpiece mounting are stable. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
TCMT 110302 T9215 Wendeplatten - Tungaloy
Combining the T9215 CVD-coated carbide with a compact 0.2 mm corner radius and standard ISO TCMT form, this insert delivers dependable productivity for medium-steel turning while tolerating continuous to light interrupted cuts; order the TCMT110302 T9215 insert directly via Metav Werkzeuge or consult the specialists for application support. TCMT110302 T9215 turning insert (ISO TCMT 110302) by Tungaloy — CVD-coated carbide, 60° triangle TCMT110302 T9215 is an ISO‑standard triangular indexable insert designed for external and internal turning, optimised for medium steel machining and high productivity. CVD-coated carbide for high wear resistance Optimised for medium steel productivity ISO TCMT 110302 triangular geometry 7° clearance with 0.2 mm corner radius High‑productivity turning for medium steels The TCMT110302 T9215 insert combines a CVD-coated carbide substrate with a cutting geometry tailored to continuous and light interrupted operations. The T9215 grade balances wear resistance and fracture toughness, enabling longer tool life under stable cutting conditions and higher material removal rates. Selecting this insert supports a measurable increase in machining efficiency: reduced tool changes and consistent dimensional results translate to better uptime on production turning centres. The triangular geometry with a 60° included angle provides three usable cutting edges per index, improving cost efficiency per edge. Secure seating and predictable chip control Compatibility with the toolholder is defined by insert form, clearance angle, tolerance class, fastening and thickness; the ISO TCMT 110302 form ensures interchangeability with standard TCMT external holders and boring bars. The single‑sided chipbreaker and optimised edge preparation promote controlled swarf evacuation in steel applications, supporting stable cutting forces and improved surface finish. The 7° clearance and 0.2 mm corner radius contribute to consistent contact conditions between insert and workpiece, reducing chatter risk and enabling repeatable process settings for batch production. Coating and substrate explained for practical gains The CVD (chemical vapour deposition) layer on this cemented carbide insert provides a hard, wear‑resistant surface that reduces flank and crater wear during typical turning parameters. In practical terms, the coating delays abrasive wear while the underlying substrate maintains edge integrity when encountering slight interruptions or moderate impact loads. For shops moving from uncoated grades, the coated carbide offers a clear advantage in cycle times and edge stability, especially when machining alloyed and carbon steels with medium hardness. Choosing the insert for your process and holder When selecting an insert for a specific turning task, match the T9215 grade and the single‑sided chipbreaker to workpiece material, depth of cut and feed rate. The plate thickness (3.18 mm) and standard 11 mm inscribed circle require a compatible seat and clamping arrangement; note the insert is supplied with hole and a cylindrical hole plus one‑sided countersink (40°–60°) to suit conventional clamping screws. For interrupted cuts or unstable setups, evaluate a larger corner radius or different chipbreaker; for stable, continuous turning the current geometry supports high productivity and reliable surface quality. For reliable, high‑productivity turning in medium steels, request availability of the Tungaloy TCMT110302 T9215 from Metav Werkzeuge or contact our application consultants at info@metav-werkzeuge.com / +49 2822 7131930 to discuss holder compatibility and cutting data. Technical data Article number: 6951428 Manufacturer SKU: TUN6951428 SKU: 6951428-Tungaloy Facts Angle: 60° Clearance angle: 7° Corner radius: 0.2 mm Plate thickness: 3.18 mm Inscribed circle / size: 11 mm Special features Shape: triangular Coating: CVD Material: cemented carbide Grade / sort: T9215 Chipbreaker: single-sided Hole: with hole; cylindrical hole + one-sided countersink (40°–60°) Application: turning (external and internal) Model series: ISO turning indexable inserts FAQ What materials is this insert designed for? The TCMT110302 T9215 insert is optimised for medium steel machining and offers balanced wear resistance and toughness suitable for alloyed and carbon steels. Does the insert require a special holder? Compatibility depends on the holder seat and clamping method; the ISO TCMT 110302 form, 3.18 mm thickness and the countersunk hole match standard TCMT external holders and boring bars. How many edges are available per insert? With the triangular 60° geometry, the insert provides three indexed cutting edges per piece, increasing effective edge economy. What cutting conditions suit the T9215 grade? The T9215 CVD‑coated carbide grade is recommended for continuous to light interrupted cuts in medium steels where a balance of wear resistance and breakage resistance is required. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCMT 110302 T9215 Wendeplatten - Tungaloy
Benefit from the combination of CVD-coated carbide T9215 for high wear resistance and fracture toughness, the ISO TCMT geometry for predictable compatibility with standard holders, and the compact 60° nose angle for reliable turning performance; order the insert directly via Metav Werkzeuge or consult our team for application-specific advice. TCMT110302 T9215 — TCMT ISO triangular insert for turning by Tungaloy The TCMT110302 T9215 is an ISO triangular carbide insert intended for external and internal turning, offering a balance of wear resistance and toughness for productive machining of medium steel. ISO triangular insert TCMT110302 for turning CVD-coated grade T9215 for medium steel 60° nose angle with 0.2 mm corner radius Central hole with cylindrical countersink Productive, wear-resistant grade for medium steel turning The T9215 grade is a CVD-coated carbide formulation developed for consistently productive machining of medium steels. Its material pairing gives a measurable increase in wear resistance while retaining sufficient toughness to resist chipping under continuous and lightly interrupted cuts. For workshop planners this translates into longer tool life, fewer insert changes and predictable process windows when machining components where surface finish and dimensional stability matter. Precise geometry for secure clamping and repeatable results The triangular insert features a nominal 60° nose angle and a 0.2 mm corner radius, combined with a 7° clearance angle and a plate thickness of 3.18 mm; these dimensions support stable cutting and ease of indexation. The centre cylindrical hole with single-sided countersink (40°–60°) ensures positive seating in compatible holders. Because the insert is ISO‑standardised, compatibility is determined by holder form, clearance angle, tolerance class, fastening method, size and thickness — a clear basis for selecting matching external holders or boring bars and reducing setup time. System advice and recommended applications for efficient turning The insert is intended to be used as part of a system comprising the ISO insert, a matching external holder or boring bar, a plate support/shim and the appropriate clamping screws. With a single‑sided chipbreaker, the grade and chipbreaker should be matched to the workpiece material, cutting mode and machine tool stability. The design is particularly suited to turning tasks on medium steel where a balance of tool life and edge stability is required; specify the suitable chipformer and cutting data to achieve optimal productivity and surface quality. For tailored recommendations on using Tungaloy’s T9215 inserts and to arrange supply through Metav Werkzeuge, please contact info@metav-werkzeuge.com or call +49 2822 7131930. Technical Data Article number: 6774040 Manufacturer SKU: TUN6774040 Metav SKU: 6774040-Tungaloy Article name: TCMT110302 T9215 Tungaloy insert Facts Nose angle: 60° Corner radius: 0.2 mm Clearance angle: 7° Plate thickness: 3.18 mm Inscribed circle: 11 mm Special features Material: carbide Coating: CVD Grade: T9215 Plate shape: triangular Chipbreaker: single-sided Hole style: central cylindrical hole + single-sided countersink (40°–60°) Intended use: turning System components: insert, holder/boring bar, shim/clamping set, spare screws FAQ Which materials is this insert best suited for? The T9215 grade on the TCMT110302 insert is primarily engineered for machining medium steel; its CVD-coated carbide substrate balances wear resistance with fracture toughness for productive turning operations. How does the central hole and countersink affect mounting? The central cylindrical hole with a single-sided countersink (40°–60°) on the TCMT110302 ensures secure seating in compatible ISO holders and reduces the risk of rotation under cutting forces when used with the correct clamping set. What should be considered when choosing the chipbreaker and cutting data? Select a chipbreaker and cutting parameters to match the workpiece material, machine rigidity and type of cut; the T9215 grade performs well under continuous and lightly interrupted cuts, but stable clamping and appropriate feeds are important to exploit its wear resistance and edge stability. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCMT 110302 T9215 Wendeplatten - Tungaloy
Take advantage of the combination of CVD‑coated carbide T9215 and the ISO TCMT geometry to achieve reliable performance in medium steel turning; the insert’s 7° clearance and 0.2 mm corner radius support consistent surface quality and extended tool life. Order via Metav Werkzeuge or consult the technical team for application-specific advice. TCMT 110302 T9215 — ISO triangular turning insert by Tungaloy, CVD‑coated carbide TCMT110302 T9215 is an ISO‑standard triangular turning insert intended for external and internal turning, engineered for medium steel machining and both continuous and light interrupted cuts CVD-coated carbide T9215 for wear resistance ISO triangular insert, 60° geometry Suitable for continuous to light interrupted cuts Central hole with cylindrical recess for clamping Reliable performance for medium steel turning The combination of CVD‑coated carbide and the T9215 grade provides a balance of high wear resistance and fracture toughness, making the insert well suited to sustained production runs. Designed for continuous to light interrupted cuts, the geometry and coating extend effective cutting life and reduce unplanned tool changes, which supports higher machine uptime and predictable machining costs. The result is consistent part quality and improved process stability in medium steel applications. Design features that ensure secure clamping and consistent results The triangular shape with a 60° included angle and a 7° clearance angle gives a sturdy cutting edge for turning operations while allowing access in internal and external contours. A 0.2 mm corner radius helps to produce a controlled surface finish without excessive cutting forces, and the 3.18 mm thickness contributes to insert rigidity. The insert is supplied with a central hole and a cylindrical recess plus a one‑sided countersink (40°–60°) to match common clamping systems; compatibility with a holder is determined by form, clearance angle, tolerance class, fastening method, size and thickness. ISO standardisation and selection guidance for efficient integration Being an ISO standard insert simplifies tool selection and replacement across toolholders and machines. The single‑sided chipbreaker recommended for this grade complements the T9215 substrate for stable chip control in steel. When specifying the insert for a process, select a chipbreaker and grade that match workpiece material and machining stability: this reduces operator adjustments and improves tool life and surface finish. The insert integrates into a system comprising a matched external holder or boring bar, clamping set and spare screws to ensure reproducible mounting and repeatable results. Contact Metav Werkzeuge for application advice on the Tungaloy T9215 turning inserts and to confirm holder compatibility or stock availability — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6951384 Manufacturer SKU: TUN6951384 Model series: ISO‑Drehwendeschneidplatten Shape: triangular Grade: T9215 Coating: CVD‑coated Material: carbide Core specifications ISO designation: TCMT110302 Insert size: 11 Thickness: 3.18 mm Corner radius: 0.2 mm Clearance angle: 7° Included angle: 60° Hole: with hole Hole style: cylindrical hole + one‑sided countersink (40°–60°) Design & special features Single‑sided chipbreaker For external and internal turning Intended for medium steel machining Suitable for continuous to light interrupted cuts Compatibility depends on holder form, tolerance class and fastening FAQ What materials is this insert suitable for? The Tungaloy TCMT110302 T9215 insert is designed primarily for medium steel machining; the CVD‑coated carbide grade combines wear resistance and toughness for productive turning. Can the insert be used for interrupted cuts? Yes, the T9215 grade and the insert geometry are suitable for continuous to light interrupted cuts and offer increased resistance to breakage under those conditions. How does the central hole affect clamping? The central hole with a cylindrical recess and one‑sided countersink ensures secure clamping in compatible ISO‑type holders, providing repeatable seating and stable cutting performance. Which holder features should be checked for compatibility? Compatibility is determined by holder form, clearance angle, tolerance class, fastening method, size and thickness; matching the holder to the ISO TCMT form ensures reliable mounting and consistent results. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com