TCMT 110208 AH6225 Wendeplatten - Tungaloy
Benefit from a combination of precise geometry and a modern PVD-coated carbide grade for consistent performance when turning stainless steels; the triangular TCMT110208 insert delivers a sharp yet stable cutting edge and straightforward compatibility with ISO holders. Order the insert directly via Metav Werkzeuge or consult their advisors for application support. TCMT110208 AH6225 Tungaloy insert — ISO turning insert for external and internal turning A TCMT110208 AH6225 Tungaloy insert designed for ISO-compliant turning applications, offering a balance of sharpness and edge stability for medium machining conditions ISO TCMT 110208 triangular geometry PVD-coated AH6225 carbide grade 0.8 mm corner radius for versatile profiling Cylindrical hole with 40°–60° countersink Consistent cutting performance for stainless steels The PVD-coated carbide grade AH6225 is engineered as a universal solution for stainless steels, delivering a sharp and stable cutting edge suited to medium machining and varying conditions. This combination reduces the need for frequent insert changes while maintaining surface quality; the coating promotes wear resistance and thermal stability during interrupted cuts. The single-sided chipbreaker is configured to control chips on conventional turning operations, helping to sustain cutting forces and reduce built-up edge formation on difficult-to-machine alloys. Clear compatibility and system considerations Compatibility with toolholders is determined by geometry, relief angle, tolerance class, clamping method, size and thickness. The triangular ISO insert fits standard external holders and boring bars when these parameters match; a shim or clamping set and the correct replacement screw complete the system. The insert’s 7° relief angle and 2.38 mm thickness contribute to stable seating and predictable cutting engagement. When selecting a holder, ensure the seat matches the insert form and that clamping torque is applied according to the holder manufacturer’s specifications to avoid premature loosening or insert movement. Choosing grade and chipbreaker for the application Select the AH6225 grade when machining a range of stainless steels where a balance of edge sharpness and robustness is required. The single-sided chipbreaker suits general roughing and finishing sequences when machine rigidity is moderate; for heavy interrupted cuts or highly unstable setups, consider a more robust geometry or a different chip control variant. Understanding the workpiece material and the required surface finish allows optimisation of cutting speed, feed and depth of cut, which in turn extends tool life and improves process economics. Practical advantages in workshop use The triangular shape with a 0.8 mm corner radius offers versatility for profiling and light turning, while the cylindrical hole with a 40°–60° countersink assures reliable clamping and repeatable positioning. Inserts are indexed to present fresh cutting edges quickly, minimising downtime in production environments. The ISO-standard form factor means replacements are widely available and integration into existing tooling arrays is straightforward, supporting a predictable production flow and easier inventory management. For application-specific advice on the PVD-coated AH6225 grade and to check availability of the TCMT110208 insert, contact Metav Werkzeuge for prompt technical guidance and order processing. Technical data Article number: 6829872 Manufacturer SKU: TUN6829872 Supplier SKU: 6829872-Tungaloy Manufacturer: Tungaloy Core specifications Insert designation: TCMT110208 Grade: AH6225 Corner radius: 0.8 mm Relief angle: 7° Insert size: 11 mm Thickness: 2.38 mm Included hole style: cylindrical hole + single-side countersink (40°–60°) Insert angle: 60° Design & features Material: carbide, PVD-coated Shape: triangular Chipbreaker: single-sided Application: turning (external and internal) Model series: ISO turning inserts System components: matching external holder or boring bar, shim/clamp set, replacement screws Compatibility determined by form, relief angle, tolerance class, clamping, size and thickness FAQ What materials is this insert suitable for? The TCMT110208 AH6225 Tungaloy insert is intended primarily for stainless steels and performs well in medium machining conditions where a sharp, stable edge is required. How does the AH6225 grade affect tool life? The AH6225 PVD-coated carbide grade improves wear resistance and thermal stability, which prolongs edge life under variable cutting conditions compared with uncoated carbide. Can this insert be used in internal turning applications? Yes, the ISO triangular form and the 11 mm size allow use in both external and internal turning when the corresponding holder or boring bar accepts TCMT110208 geometry. What should be checked for holder compatibility? Verify form, relief angle, tolerance class, clamping method, insert size and thickness against the holder seat; proper matching ensures secure clamping and repeatable positioning. Is the insert indexed and easily replaceable? Yes, the triangular insert is indexable, providing multiple cutting edges and allowing quick replacement to reduce machine downtime. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCMT 110208 AH6235 Wendeplatten - Tungaloy
Optimise turning operations with the durable PVD-coated AH6235 grade and the ISO TCMT110208 geometry: reliable chip control, extended edge life and secure mounting reduce downtime and scrap. Order the insert directly via Metav Werkzeuge or consult their specialists for application-specific recommendations. TCMT110208 AH6235 Turning insert (ISO triangular, PVD-coated carbide) – Tungaloy The TCMT110208 AH6235 is a triangular ISO turning insert designed for external and internal turning, providing robust performance in interrupted cuts and demanding rostfreier Stahl applications. PVD-coated carbide grade AH6235 Optimised single-sided chipbreaker ISO triangular 11 mm, 7° clearance Suitable for interrupted cuts and rostfreier Stahl Consistent edge life with a tougher PVD-coated grade The combination of a PVD-coated surface and the AH6235 substrate provides a balance of toughness and wear resistance that is particularly effective for machining rostfreier Stahl and other difficult-to-machine alloys. This formulation reduces the risk of chipping under interrupted cutting conditions and supports longer tool life, which improves process economy and lowers the frequency of tool changes. The PVD layer also enhances resistance to built-up edge formation, maintaining cutting performance over extended cycles and contributing to reproducible surface finish and dimensional stability. Stable cutting geometry for secure clamping and chip control Designed to the ISO geometry, the insert’s triangular shape and 11 mm size ensure compatibility with a wide range of ISO holders; fit is governed by form, clearance angle, tolerance class, fastening method, size and thickness. The single-sided chipbreaker steers chips reliably on typical turning operations, while the 7° clearance and 60° included angle reduce contact forces and vibration. The 0.8 mm corner radius supports robust edge strength without compromising profile accuracy, helping to maintain stable cutting conditions, reduce chatter and improve productivity on both roughing and semi-finishing passes. Application guidance and manufacturer confidence Intended for turning applications—both external and internal—the insert performs best when the chipbreaker and grade are matched to workpiece material, machining type and machine stability. For interrupted cuts or operations with risk of edge failure, the tougher substrate of this grade provides added security. Backed by Tungaloy’s engineering and material know-how, the product offers dependable, repeatable results for production environments where process reliability matters. Selection support is available to help align insert geometry and chip control with machining strategy and equipment capability, enabling predictable throughput and quality. For specification advice, availability and fast supply of the Tungaloy TCMT110208 AH6235 turning insert, contact Metav Werkzeuge GmbH at info@metav-werkzeuge.com or call +49 2822 7131930 for tailored application support and order processing. Technical data Article number: 6903494 Manufacturer SKU: TUN6903494 SKU: 6903494-Tungaloy Model series: ISO turning inserts Material: Carbide Core data Corner radius: 0.8 mm Included angle: 60° Clearance angle: 7° Thickness: 2.38 mm Size: 11 mm Designation: 110208 Special features PVD-coated carbide, grade AH6235 Tough grade for rostfreier Stahl and interrupted cuts Single-sided chipbreaker ISO triangular plate with cylindrical hole + single-sided countersink (40°–60°) Designed for external and internal turning; compatibility via holder form and tolerance FAQ What materials is this insert suitable for? The TCMT110208 AH6235 insert by Tungaloy is formulated for rostfreier Stahl and other difficult-to-machine alloys; the AH6235 grade offers increased toughness for interrupted cuts. Which machine operations benefit most from this insert? This triangular ISO insert is intended for external and internal turning operations where secure chip control and edge stability are required, particularly in intermittent cutting. How does the chipbreaker influence performance? The single-sided chipbreaker on the TCMT110208 promotes reliable chip evacuation for standard turning feeds and helps maintain surface finish with controlled chip flow. What dimensions and clamping features should be checked for compatibility? Verify holder form, clearance angle, tolerance class, fastening method, size (11 mm) and plate thickness (2.38 mm) to ensure proper fit and secure clamping of the insert. Is this an original Tungaloy product and how to order? The TCMT110208 AH6235 is an original Tungaloy turning insert (article number 6903494). Orders and technical enquiries can be placed via Metav Werkzeuge; Metav provides specification support and supply. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCMT 110208 AH6235 Wendeplatten - Tungaloy
Take advantage of the PVD-coated carbide AH6235 and the secure, countersunk mounting to achieve reliable turning in stainless steel and interrupted cuts; combine wear resistance with stable chip control for efficient machining and reduced downtime. Order availability and technical advice are provided by Metav Werkzeuge for straightforward procurement and process integration. TCMT110208 AH6235 ISO turning insert by Tungaloy — triangular 60° geometry, PVD-coated A TCMT110208 AH6235 triangular ISO insert for external and internal turning, optimised for machining stainless steel and applications with interrupted cuts. Triangular insert with 60° cutting angle PVD-coated carbide AH6235 for stainless steel One-sided chipbreaker for interrupted cuts Cylindrical hole with countersink for secure mounting Reliable grade and coating for challenging stainless-steel work The PVD-coated carbide grade AH6235 is formulated to resist built-up edge and premature wear in demanding stainless-steel turning. This tougher grade combines a hard surface with a resilient substrate, so the insert tolerates interrupted cuts and applications with elevated chipping risk while maintaining a consistent edge. The result is fewer insert changes and more predictable cycle times, contributing to measurable productivity gains in batch and job-shop environments. Geometry and mounting that support process stability The triangular design, with a nominal 60° cutting angle and 7° clearance, provides a stable cutting edge and straightforward seat geometry in standard ISO holders. The 0.8 mm corner radius delivers a balance between edge strength and surface finish; the plate thickness 2.38 mm and cylindrical hole with a one-sided countersink (40°–60°) ensure secure clamping and repeatable positioning. These dimensions ease tool selection and reduce set-up time when replacing inserts or switching operations. Chip control and application-specific advantages The one-sided chipbreaker is tuned for the AH6235 grade to produce manageable chip forms when turning stainless steel under varying feeds and depths. Proper pairing of chipbreaker, grade and holder reduces the likelihood of edge breakouts and improves surface integrity, which is particularly valuable for components requiring tight finishes or subsequent heat treatment. This combination supports efficient machining and longer tool life, lowering overall production costs. Selection and practical tips for integration Compatibility with holders depends on form, clearance, tolerance class, clamping and plate size; choosing the correct chipbreaker and clamping method is essential for best results. For interrupted cuts or unstable setups, prefer the tougher AH6235 grade and conservative feed values to protect the cutting edge. When considering internal turning or confined geometries, confirm the holder clearance and reach to retain the insert’s intended cutting angles and stability. Discuss application requirements with Metav Werkzeuge to match the TCMT110208 AH6235 to the correct holder and chipbreaker, and to confirm stock and delivery options via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6903487 Manufacturer SKU: TUN6903487 SKU: 6903487-Tungaloy Designation: TCMT110208 AH6235 Tungaloy-Wendeplatte Core technical data Cutting angle: 60° Clearance (relief) angle: 7° Corner radius: 0.8 mm Plate thickness: 2.38 mm Plate size: 11 Hole style: cylindrical hole + one-sided countersink (40°–60°) Design / Special features Material: carbide (PVD-coated) One-sided chipbreaker for interrupted cuts Triangular plate form for multiple cutting edges With hole for secure mounting Intended use: external and internal turning; select chipbreaker and grade to match workpiece and stability FAQ Which materials is this insert designed to machine? The TCMT110208 AH6235 insert is optimised for stainless steel and performs well in interrupted cuts; the tougher PVD-coated carbide grade gives improved edge stability in demanding workpiece materials. What holder compatibility should be considered? Compatibility is determined by insert form, clearance, tolerance class, clamping method, size and thickness; the triangular form and countersunk hole suit standard ISO turning holders when matched to the plate dimensions. How does the chipbreaker influence performance? The one-sided chipbreaker helps produce controllable chips during turning, reducing the risk of edge breakout and supporting consistent surface finish when paired with the AH6235 grade. Can this insert be used for internal turning? Yes, the insert can be used for internal turning provided the selected holder offers sufficient clearance and the cutting angles remain correct for the intended operation. What are the key mounting features to ensure secure clamping? The cylindrical hole combined with the one-sided countersink (40°–60°) ensures stable seating and repeatable clamping torque, which contributes to process reliability with the TCMT110208 AH6235 insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCMT 110208 AH725 Wendeplatten - Tungaloy
Optimise turning processes with the combination of the AH725 PVD-coated carbide for extended tool life and the ISO TCMT110208 geometry for broad holder compatibility; efficient chip control and secure clamping reduce downtime. Order the insert directly via Metav Werkzeuge or consult our technical advisors for selection and availability. TCMT 110208 AH725 indexable turning insert — PVD-coated carbide for precision turning by Tungaloy A TCMT 110208 AH725 indexable turning insert engineered for external and internal turning applications, delivering robust chip control and universal performance on steel and rostfreier Stahl. TCMT triangular insert, ISO 110208 format PVD-coated AH725 grade for steel and rostfreier Stahl 0.8 mm corner radius for fine finish Single-sided chipbreaker, secure clamping with hole High-performance cutting for mixed materials and stable wear resistance The PVD-coated AH725 grade combines a wear-resistant carbide substrate with a protective coating that improves thermal stability and abrasion resistance, which in turn extends edge life under varying cutting conditions. Designed as an ISO-conforming insert, the geometry with a 60° included angle and 7° clearance supports both external and internal turning, while the single-sided chipbreaker promotes consistent chip formation. These characteristics make the insert suitable for general turning tasks and for operations where process reliability is essential, particularly when machining steel and rostfreier Stahl under mixed or changing conditions. Secure seating and reliable chip control for consistent production The ISO standardisation of the insert ensures that pad form, clearance angle, tolerance class, fixing method, size and thickness match common holder systems, simplifying tool setup and minimising indexing errors. The triangular shape with an 11 mm plate size and the presence of a central hole with a cylindrical bore and one-sided countersink (40°–60°) ensure accurate location and firm clamping; the plate thickness of 2.38 mm and corner radius 0.8 mm balance edge strength with surface finish capability. The single-sided chipbreaker profile is tuned for stable chips in turning operations, which reduces tool interference and supports uninterrupted cycles, increasing overall process security. Economical machining: fewer tool variants, longer runtime A universal, outcrop-resistant grade such as AH725 helps to reduce inventory complexity by covering a wide material range; this lowers tooling costs and simplifies tool management. The combination of a robust cutting edge and a PVD layer decreases flank and crater wear, enabling longer intervals between indexings and replacements and therefore fewer unplanned stops. For workshops handling diverse workpiece materials or operating smaller tool sizes with high demands on process reliability, this insert offers a pragmatic balance of performance and economy while maintaining consistent surface quality. Consult Metav Werkzeuge for tailored recommendations and immediate availability of the TCMT110208 AH725 insert by Tungaloy — application advice and matching holder options are available through our advisors. Technical data Article number: 6865485 Manufacturer SKU: TUN6865485 SKU: 6865485-Tungaloy Core data ISO designation: TCMT110208 Grade: AH725 (PVD-coated carbide) Application: Turning Special features Shape: triangular, plate size 11 mm Thickness: 2.38 mm Corner radius: 0.8 mm Included angle: 60° Clearance angle: 7° Hole: cylindrical with one-sided countersink (40°–60°) Chipbreaker: one-sided FAQ Which holders are compatible with this insert? The TCMT110208 AH725 insert follows ISO dimensions and tolerance classes, so compatibility depends on holder form, clamping method and size; matching ISO 110208 triangular holders with a central fixing are required. For which materials is this grade recommended? The AH725 PVD-coated carbide grade is intended for universal use on steel and rostfreier Stahl, offering a balance of wear resistance and fracture toughness for mixed-material machining. How does the chipbreaker affect machining results? The single-sided chipbreaker on this insert promotes controlled chip formation during turning, improving surface finish and reducing the risk of chip entanglement in automated and manual operations. What are the dimensional features relevant to my setup? Key dimensions are plate size 11 mm, thickness 2.38 mm and a corner radius of 0.8 mm; the insert has a 60° included angle and a 7° clearance angle for standard triangular turning applications. Is the insert suitable for small-tool applications and changing workpiece materials? Yes, the AH725 grade is specifically aimed at applications with varying materials and smaller tool sizes where process reliability and fracture resistance are priorities. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld, Deutschland.
TCMT 110208 AH725 Wendeplatten - Tungaloy
Take advantage of the combination of PVD-coated AH725 wear resistance, universal suitability for Stahl and rostfreier Stahl, and ISO compatibility to secure consistent, productive turning cycles; order the insert directly via Metav Werkzeuge or ask our consultants if needed TCMT 110208 AH725 — Indexable turning insert for external and internal turning by Tungaloy A TCMT110208 AH725 indexable insert engineered for external and internal turning, offering a robust one-sided chipbreaker and ISO-compliant geometry PVD-coated carbide AH725 for wear resistance ISO-compatible triangular insert, 7° clearance One-sided chipbreaker, cylindrical hole + countersink 0.8 mm corner radius, 60° insert geometry Stronger process security through grade and coating The combination of a PVD-coated surface and a wear-resistant carbide substrate provides measurable advantages in repeated turning operations. The AH725 grade is designed as a universal, break-resistant option for both Stahl and rostfreier Stahl, reducing the frequency of edge failures and unexpected downtime. By favouring a grade with broad workpiece compatibility, production planners gain predictable tool life and fewer insert changes, which translates into smoother workflow and lower indirect costs per component. The one-sided chipbreaker supports controlled chip formation under varying conditions, maintaining surface quality while reducing the need for manual chip handling. Clear mounting and ISO compatibility for faster tool changes The geometry conforms to ISO standards, which simplifies toolholder selection and reduces mismatch risk between insert and holder. The triangular plate form with a cylindrical hole and single-sided countersink (40°–60°) ensures secure clamping and repeatable positioning in compatible holders. With a defined 7° clearance and a 60° included angle, the insert is straightforward to index and reinstall, shortening set-up times and improving first-piece quality. Documentation of tolerances and fit derives directly from ISO norms, allowing integration into established tool management systems without additional customisation. Designed geometry and applications for dependable finishes A corner radius of 0.8 mm gives a good compromise between edge strength and surface finish, particularly where mixed operations or intermittent cuts occur. The plate thickness of 2.38 mm and a size indicated by the 11 mm inscribed circle support small-to-medium diameter tool assemblies while retaining sufficient mass for stable cutting. The single-sided chipbreaker is optimal for many external and internal turning tasks, especially when machining varying batch materials or when smaller tool bodies are required. For process planners seeking repeatability, the insert’s combination of geometry and the AH725 substrate helps secure consistent surface quality and extended intervals between regrinds or replacements. For technical procurement or application advice on this Tungaloy turning insert, contact Metav Werkzeuge for tailored recommendations or ordering details Technical Data Article number: 6856795 Manufacturer SKU: TUN6856795 Our SKU: 6856795-Tungaloy Model series: ISO turning indexable inserts Designation: TCMT110208 AH725 Facts Thickness: 2.38 mm Corner radius: 0.8 mm Inscribed circle / size: 11 mm Insert angle: 60° Clearance angle: 7° Countersink range: 40°–60° Special features Coating: AH725 (PVD) Material: carbide Plate form: triangular Hole style: cylindrical hole + one-sided countersink Chipbreaker: one-sided Application: Turning (external and internal) ISO designation: 110208 FAQ What materials is this insert suitable for? The TCMT110208 AH725 insert is formulated for machining Stahl and rostfreier Stahl, with the AH725 grade offering broad material coverage and reliable chip control across varying workpiece steels. How is the insert mounted and secured? The triangular plate features a cylindrical hole with a one-sided countersink (40°–60°), designed for ISO-compatible holders and standard clamping systems; secure mounting ensures repeatable positioning. What advantage does the AH725 coating provide? The AH725 PVD coating improves wear resistance and edge stability, extending effective tool life in mixed-material turning operations and enhancing process security. Can this insert be used for internal turning as well as external turning? Yes, the geometry and chipbreaker make the insert suitable for both external and internal turning tasks, provided the holder and machine set-up are appropriate for the chosen operation. Which toolholders are compatible with this insert? Compatibility is determined by ISO form, clearance, tolerance class, fastening method, size and thickness; select holders that match the TCMT110208 ISO designation and the stated dimensions for best results. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCMT 110208 AH725 Wendeplatten - Tungaloy
Take advantage of the combination of PVD-coated AH725 grade and a 0.8 mm nose radius for stable, repeatable turning operations; the ISO TCMT110208 geometry ensures compatibility with standard holders and reduces set-up time. Order the TCMT110208 AH725 insert directly via Metav Werkzeuge or consult their advisors for the optimal chipbreaker and holder match. TCMT 110208 AH725 Turning insert (ISO TCMT110208) — PVD-coated carbide, 0.8 mm radius (Tungaloy) TCMT110208 AH725 is an ISO-standard triangular indexable insert designed for external and internal turning applications where process security and versatile material coverage are required PVD-coated carbide grade AH725 ISO TCMT110208 triangular insert 0.8 mm nose radius for fine profiles Compatible with ISO turning holders High-capacity, wear-resistant grade for mixed-material production The PVD-coated AH725 carbide offers a balanced combination of wear resistance and toughness suitable for machining Stahl and rostfreier Stahl. This universal, chipbreaker-matched grade was developed for applications where tool reliability across varying workpiece materials is essential. The result is stable chip formation and consistent cutting-edge performance, which contributes directly to reduced rework and more predictable cycle times on mixed-production jobs. Geometry engineered for repeatable clamping and accurate form control Built to the ISO TCMT110208 standard, the triangular indexable insert provides three usable corners and precise seating when paired with the correct holder and shim. Key geometry values—0.8 mm nose radius, 7° relief angle and a plate thickness of 2.38 mm—ensure consistent seating, accurate form control and reliable cutting when interrupted cuts or variable cutting forces occur. The insert’s cylindrical hole with a one-sided countersink (40°–60°) secures clamping torque and repeatability, reducing set-up variation and minimising vibration-induced wear. Practical system integration for efficient turning operations As part of a complete system—insert, external holder or boring bar, underlay shim and mounting screw—the TCMT110208 form facilitates fast replacement and precise reindexing. For external and internal turning, select the chipbreaker tailored to the material and stability of the set-up; the supplied one-sided chipbreaker concept supports reliable chip flow in many turning scenarios. Assistance is available from Metav Werkzeuge for matching holders and selecting the correct chipbreaker to balance surface finish and tool life. Operational benefits that support productivity and quality The design focus on process security and robust edge integrity makes this insert particularly well suited to smaller tools and operations where tooling changes must be kept to a minimum. Users will typically observe improved surface finish consistency and extended tool life, while the universal character of the grade reduces inventory complexity. Where frequent material changes occur, the combination of PVD coating and the AH725 substrate helps maintain dimensional stability and predictable wear behaviour. For tailored selection of Tungaloy AH725 turning inserts and advice on holder compatibility, contact Metav Werkzeuge: info@metav-werkzeuge.com, +49 2822 7131930 Technical data Article number: 6856718 Manufacturer SKU: TUN6856718 Brand: Tungaloy Model series: ISO-Drehwendeschneidplatten Designation: TCMT110208 AH725 Tungaloy-Wendeplatte Facts Shape: triangular ISO code: 110208 Radius: 0.8 mm Relief angle: 7° Plate thickness: 2.38 mm Plate size: 11 mm Special features Material: carbide Coating: PVD-coated Chipbreaker: one-sided Hole: cylindrical hole + one-sided countersink (40°–60°) Application: turning (external and internal) Designed for compatibility with ISO turning holders FAQ What materials is this insert suitable for? The TCMT110208 AH725 insert from Tungaloy is optimised for machining Stahl and rostfreier Stahl, providing reliable chip control and edge stability across these alloys. How does the 0.8 mm nose radius affect the finished part? A 0.8 mm nose radius offers a balance between profile definition and edge strength, improving surface finish consistency while reducing the risk of edge chipping during turning. Is the insert compatible with standard ISO holders? Yes. The TCMT110208 geometry and the cylindrical hole with countersink are designed to match ISO-standard external holders and boring bars for secure clamping and repeatable positioning. What is the benefit of the AH725 grade and PVD coating? The AH725 grade combined with a PVD-coated surface increases wear resistance and heat endurance, extending tool life and maintaining cutting performance under varying production conditions. How many cutting edges are available per insert and how is indexing performed? The triangular insert form provides three cutting corners; indexing is performed by loosening the clamp screw, rotating the insert to the next corner and re-securing, ensuring quick on-machine changeover. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCMT 110208 AH8015 Wendeplatten - Tungaloy
Take advantage of the combination of PVD‑coated AH8015 cemented carbide, a 0.8 mm corner radius and ISO compatibility for reliable turning of heat‑resistant alloys; order the insert directly via Metav Werkzeuge or consult the Metav team for application support. TCMT 110208 AH8015 Tungaloy turning insert — ISO triangular insert, PVD‑coated The TCMT110208 AH8015 is an ISO‑standard triangular indexable insert engineered for precision external and internal turning of heat‑resistant alloys and similar demanding materials. PVD‑coated cemented carbide AH8015 ISO triangular insert, 60° geometry 0.8 mm corner radius for general turning Cylindrical hole with one‑sided countersink Consistent machining on heat‑resistant alloys The PVD‑coated AH8015 grade combines wear resistance and edge stability to deliver steady performance when machining heat‑resistant alloys. The coating reduces flank wear under elevated temperatures, while the substrate provides stable cutting edges, resulting in predictable surface finish and reduced rework. This balance makes the insert suitable for jobs where consistent chip formation and moderate roughing to finishing passes are required. Predictable cutting behaviour and tool life A 0.8 mm corner radius together with the 7° relief angle produces reliable edge strength and controllable cutting forces. The triangular 60° geometry allows three indexing positions, improving tool life economics and reducing spindle downtime for insert changes. For operations prioritising throughput, this combination helps maintain process stability and lowers the frequency of insert replacement. Simple integration into ISO tooling systems Designed to ISO dimensions, the triangular insert fits standard external holders and bore bars where form, clearance angle, tolerance class, fastening method, size and thickness correspond. The 2.38 mm thickness and the cylindrical hole with one‑sided countersink (40°–60°) ensure secure clamping and repeatable seating in many indexable turning toolholders, simplifying tool changeover and inventory management across multiple machines. Practical guidance for application and chip control Equipped with a single‑sided chipbreaker, the insert supports consistent chip control when matched to the workpiece material and cutting parameters. Selecting the correct chipbreaker and cutting data minimises built‑up edge and improves surface integrity. For general turning tasks and where a balanced compromise between wear resistance and edge robustness is required, the AH8015 grade is an appropriate first choice. Contact Metav Werkzeuge for stock availability, cutting data recommendations and rapid supply of Tungaloy TCMT110208 AH8015 inserts at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Manufacturer article number: 6825770 Manufacturer SKU: TUN6825770 Dealer SKU: 6825770-Tungaloy Core data Designation / ISO code: 110208 Geometry angle: 60° Corner radius: 0.8 mm Thickness: 2.38 mm Relief angle: 7° Size: 11 Design and special features Material: cemented carbide Coating: PVD Grade: AH8015 Insert shape: triangular Hole: cylindrical with one‑sided countersink (40°–60°) Chipbreaker: single‑sided Intended use: turning (external and internal) FAQ What materials is the TCMT110208 AH8015 best suited for? The TCMT110208 AH8015 insert is optimised for heat‑resistant alloys and offers a balanced combination of wear resistance and edge stability for a broad range of challenging alloys. How does the 0.8 mm corner radius affect cutting performance? A 0.8 mm corner radius provides increased edge strength for general turning operations while maintaining acceptable surface finish and cutting forces, making it suitable for both roughing and mixed finishing passes. Can the insert be used in standard ISO holders? Yes, the TCMT110208 conforms to ISO indexable insert dimensions; compatibility depends on matching form, thickness (2.38 mm), tolerance class and clamping method in the chosen holder. What does the cylindrical hole with countersink improve? The cylindrical hole with a one‑sided countersink (40°–60°) ensures secure, repeatable clamping and helps maintain accurate seating under higher cutting loads. Is AH8015 a coated or uncoated grade? AH8015 is a PVD‑coated cemented carbide grade designed to balance wear resistance and cutting edge stability for demanding turning tasks. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
TCMT 110208 AH8015 Wendeplatten - Tungaloy
Take advantage of a PVD-coated carbide grade that balances wear resistance and edge stability, combined with an optimised 0.8 mm corner radius for reliable finishing and longer tool life; the triangular ISO design and a cylindrical hole with a 40°–60° countersink ensure secure clamping and predictable performance. Order the TCMT110208 AH8015 insert directly via Metav Werkzeuge or ask our consultants if needed. TCMT110208 AH8015 Tungaloy indexable insert for Turning — PVD-coated carbide, 0.8 mm radius TCMT110208 AH8015 Tungaloy indexable insert is designed for general turning applications and is particularly suited to machining heat-resistant alloys. PVD-coated carbide for high wear resistance Balanced edge stability for long tool life Triangle shape with 60° included angle Cylindrical hole with 40°–60° countersink Consistent cutting performance for heat‑resistant alloys The PVD-coated AH8015 grade combines a wear‑resistant surface with a robust carbide substrate, producing a balanced mix of abrasion resistance and edge stability. This balance is beneficial when machining heat‑resistant alloys, where temperatures at the cutting edge rise quickly and uncontrolled wear shortens tool life. The modest 0.8 mm corner radius gives a compromise between strength and finish, reducing the risk of chipping while maintaining a consistent surface quality. In practice, this leads to fewer insert changes and more predictable cycle times on turning operations. Secure clamping and straightforward holder compatibility As an ISO‑standard triangular insert, compatibility with toolholders depends on form, clearance angle, tolerance class, fastening and plate thickness. The geometry provides a 60° included angle and a 7° clearance, optimised for stable cutting engagement. A cylindrical hole with a one‑side countersink (40°–60°) ensures accurate seating and reliable clamping, which reduces micro‑movements during heavy cuts. Clear, standardised dimensions make selection of the matching external holder or boring bar a matter of specification rather than trial, simplifying inventory and set‑up. Improve throughput through predictable wear and surface quality A grade designed for general machining of challenging alloys helps to reduce downtime and improve first‑pass yield. The AH8015 combination is intended as a first choice for applications where a balance of life and edge security matters more than maximising feed or speed alone. The single‑sided chipbreaker encourages consistent chip formation under stable conditions, supporting predictable surface finish and reduced secondary operations. For both external and internal turning, selecting the correct chipbreaker and grade relative to workpiece material and rigidity will yield the best results. If additional technical parameters or cutting data are required to match specific setups, the supplier provides support and detailed recommendations; supplementary information is available by email or phone for straightforward integration into production planning. The technical details and compatibility notes help with holder selection and process planning, enabling smoother implementation on shop floors. Contact Metav Werkzeuge for tailored advice on Tungaloy TCMT110208 AH8015 inserts and to arrange supply — email info@metav-werkzeuge.com or call +49 2822 7131930 for precise application support and availability Technical data Article number: 6825793 Manufacturer SKU: TUN6825793 SKU: 6825793-Tungaloy Model series: ISO‑Drehwendeschneidplatten Designation: TCMT110208 Grade: AH8015 Material: Carbide (Hartmetall) Core data Included angle: 60° Corner radius: 0.8 mm Clearance angle: 7° Plate thickness: 2.38 mm Plate size: 11 mm Special features PVD coating Single‑sided chipbreaker Triangle plate form Cylindrical hole with single‑side countersink (40°–60°) Intended application: Turning (external and internal) FAQ What materials is the TCMT110208 AH8015 insert suitable for? The TCMT110208 AH8015 insert from Tungaloy is optimised for heat‑resistant alloys and is also suitable for general turning where a balanced combination of wear resistance and edge stability is required. How is holder compatibility determined for this insert? Holder compatibility depends on the insert form, clearance angle, tolerance class, fastening method, size and thickness; the ISO‑standard shape of the TCMT110208 simplifies matching with suitable external holders or boring bars. What chip control can be expected from this geometry? The single‑sided chipbreaker and triangular 60° geometry of the TCMT110208 promote consistent chip formation under stable conditions, supporting consistent surface finish and predictable tool life. Does the insert provide secure clamping for heavy cuts? Yes. The TCMT110208 features a cylindrical hole with a single‑side countersink (40°–60°) designed to ensure accurate seating and stable clamping, reducing micro‑movement during heavy cuts. What does the AH8015 grade signify? The AH8015 grade is a PVD‑coated carbide engineered as a first choice for machining heat‑resistant alloys, offering a compromise between abrasion resistance and edge stability for reliable production performance. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
TCMT 110208 AT9530 Wendeplatten - Tungaloy
Take advantage of a coated AT9530 cermet for superior surface finish and uniform wear combined with ISO compatibility and a compact 11 mm triangular format; order the TCMT110208 AT9530 Tungaloy insert directly via Metav Werkzeuge or consult the advisers for application matching. TCMT 110208 AT9530 Tungaloy indexable insert — Coated cermet for precision turning (triangle, 11 mm) A TCMT110208 AT9530 indexable insert engineered for precision external and internal turning, optimised for finishing and light machining of steel. TCMT110208 geometry for ISO turning systems Coated AT9530 cermet for excellent surface finish 0.8 mm corner radius for consistent profile control Single-sided chipbreaker and 7° clearance angle Consistent surface quality through a coated cermet grade The coated AT9530 cermet combines a hard, wear-resistant substrate with a thin protective layer to reduce adhesion and maintain a fine surface finish in finishing operations. Cermet grades are designed to deliver low built-up edge and steady flank wear, which translates into longer intervals between regrinds and fewer scrap parts. For manufacturers seeking repeatable part quality, this material class provides improved dimensional stability when compared with conventional coated carbides in light-turning scenarios. ISO conformity and mechanical fit for reliable clamping Supplied in the ISO TCMT110208 format, the insert matches holders by virtue of its form, clearance angle, tolerance class, fastening method, size and thickness. The 7° clearance angle and triangular 11 mm footprint ensure compatibility with standard external and internal turning holders; attention to these mechanical parameters prevents incorrect seating and minimises vibration. When selecting a toolholder, verify the seat geometry and fastening screw arrangement to achieve the intended clamping rigidity and repeatable tool position. Predictable chip control and secure fastening for process stability A single-sided chipbreaker on the insert promotes controlled chip formation during finishing passes, reducing the risk of surface damage on delicate profiles. The insert is supplied with a cylindrical hole and a one-sided countersink (40°–60°) to ensure a secure mechanical fit and consistent locating on the seat. The 0.8 mm corner radius provides a balance between edge strength and the ability to produce tight profiles, offering controlled cutting forces and less tool chatter in stable setups. Practical application scope and system considerations Designed primarily for turning of steel in finishing and light-machining roles, this insert performs best when combined with an appropriate holder, clamp or wedge, and replacement screws as part of the indexable tooling system. The system approach—insert, holder, backing plate and fasteners—ensures correct force distribution and repeatable chipbreaker engagement. For operations that require improved surface integrity and uniform wear, the coated cermet grade is a practical choice; match the chipbreaker and grade to workpiece hardness and machine rigidity for optimal results. For precision finishing on steel, contact Metav Werkzeuge for availability and application advice regarding the Tungaloy TCMT110208 AT9530 insert; email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitability and delivery options. Technical data Article number: 6773745 Manufacturer: Tungaloy SKU: 6773745-Tungaloy Manufacturer SKU: TUN6773745 Facts Insert size: 11 mm Thickness: 2.38 mm Corner radius: 0.8 mm Clearance angle: 7° Included angle: 60° Countersink: 40°–60° Special features ISO designation: TCMT110208 Grade: AT9530 (coated cermet) Shape: triangular Hole: with cylindrical hole + one-sided countersink Chipbreaker: single-sided Application: turning, finishing and light machining of steel Model series: ISO-indexable turning inserts FAQ Is this insert suitable for finishing steel components? Yes. The TCMT110208 AT9530 Tungaloy indexable insert is formulated for finishing and light machining of steel, offering a coated cermet grade that supports fine surface quality and steady wear. What holders are compatible with this insert format? Holders designed for the TCMT 110208 ISO format with a matching seat, fastening screw pattern and the correct 7° clearance angle are compatible; ensure the holder accepts a triangular 11 mm insert and provides sufficient rigidity. How does the chipbreaker affect performance? The single-sided chipbreaker provides controlled chip formation during finishing passes, improving surface integrity and reducing the risk of material adhesion on the cutting edge when machining steels. Can the insert be used for internal turning? Yes. With an appropriate internal boring bar or holder that accepts the TCMT 110208 geometry, the insert is suitable for internal turning tasks that require fine surface finish. What does the 0.8 mm corner radius mean for part profiles? A 0.8 mm corner radius balances edge strength and profile definition; it helps maintain consistent corner geometry while resisting premature chipping in finishing cuts. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCMT 110208 GH730 Wendeplatten - Tungaloy
Take advantage of the GH730 grade and robust carbide construction for extended tool life and stable cutting edges; the ISO-compatible triangular form and precise 7° clearance ensure straightforward holder compatibility and reliable set-up. Order the TCMT110208 GH730 Tungaloy insert directly via Metav Werkzeuge or ask our consultants if needed. TCMT110208 GH730 – ISO turning indexable insert for turning (Tungaloy) A TCMT110208 GH730 indexable carbide insert optimised for ISO-format turning, suitable for external and internal turning where edge stability and controlled chip formation are required ISO triangular insert TCMT110208, size 11 GH730 grade for wear resistance and edge stability 0.8 mm corner radius, single-sided chipbreaker Cylindrical hole with 40°–60° one-sided countersink Consistent tool life through a balanced grade and material The GH730 cutting grade, combined with a carbide substrate, is engineered to balance wear resistance and toughness. This balance reduces unexpected edge breakage and extends the intervals between index changes, which directly supports higher uptime and lower tooling costs per component. In practical terms, fewer interruptions for insert replacement translate into more predictable cycle times for turning operations. Accurate fit and simplified set-up for quick changeovers Designed to the ISO form TCMT110208, the insert's 7° clearance and standard geometry make compatibility with ISO holders straightforward and repeatable. The plate thickness 2.38 mm and size 11 conform to common clamping systems, while the cylindrical hole with a one-sided countersink (40°–60°) ensures secure fastening. These measurable specifications help prevent assembly errors and reduce set-up time during tool changes. Controlled chips and stable surface quality with defined edge geometry The 0.8 mm corner radius and single-sided chipbreaker provide a compromise between strength and finish: the corner radius supports edge stability during semi-finishing, while the chipbreaker improves evacuation and reduces re-cutting of swarf. As a result, operators can expect a more consistent surface finish and predictable behaviour when machining a range of turning tasks, provided the chipbreaker and grade are chosen to match workpiece material and machining stability. Contact Metav Werkzeuge for application advice or to request a quotation for Tungaloy TCMT110208 GH730 turning inserts – email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6821005 Manufacturer SKU: TUN6821005 Our SKU: 6821005-Tungaloy Core measurements Corner radius: 0.8 mm Plate thickness: 2.38 mm Insert size: 11 Included angle: 60° Clearance angle: 7° Materials & features Material: carbide Grade: GH730 ISO designation: TCMT110208 Shape: triangular Hole: cylindrical with one-sided countersink (40°–60°) Chipbreaker: single-sided Intended use: turning FAQ Is the insert suitable for both external and internal turning? Yes. The TCMT110208 GH730 Tungaloy insert is designed for ISO-format turning and can be used for external and internal operations, with holder compatibility determined by form, clearance angle, tolerance class, fastening and size. What advantages does the GH730 grade deliver? The GH730 grade offers a balanced combination of wear resistance and toughness for consistent edge stability, which helps to extend insert life and maintain predictable machining performance under varying cutting conditions. How does the insert ensure secure clamping in common holders? The TCMT110208 design features a cylindrical hole with a one-sided countersink (40°–60°) and standard thickness, enabling firm, repeatable clamping when paired with a compatible ISO insert seat and fastening hardware. Which cutting tasks benefit most from the 0.8 mm corner radius? A 0.8 mm corner radius supports semi-finishing and finishing cuts where a balance between edge strength and surface quality is required; it reduces the risk of chipping while maintaining acceptable surface finish on turned parts. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCMT 110208 GT9530 Wendeplatten - Tungaloy
Taking advantage of a coated cermet grade that balances surface quality and extended life, this ISO triangular insert delivers precise finishing in stable turning setups; rely on its 0.8 mm corner radius and secure central mounting to maintain consistent performance. Order the TCMT110208 GT9530 insert via Metav Werkzeuge or consult our application specialists for selection support. TCMT110208 GT9530 TCMT Turning Insert for Turning by Tungaloy TCMT110208 GT9530 is a coated cermet, ISO triangular indexable insert designed for finishing and light universal turning in steel. ISO triangular insert TCMT 110208, 60° geometry Coated cermet GT9530 for finishing and light turning 0.8 mm corner radius for fine surface finishes Central hole with cylindrical bore and single-side countersink Precision finishing and prolonged tool life with a modern cermet grade The GT9530 grade is a coated cermet developed for wear resistance during finish and light universal turning operations in steel, offering a favourable compromise between surface quality and tool longevity. The indexable triangular geometry with 60° main angle and a relatively small 0.8 mm corner radius produces fine surface finishes while reducing the risk of thermal damage under stable cutting conditions. Because the substrate and coating are optimised for low wear, the insert reduces frequency of tool changes and contributes to smoother production cycles without sacrificing dimensional accuracy. Secure clamping and straightforward holder compatibility for reliable operation Compatibility with toolholders is determined by geometry, relief angle, tolerance class, fastening method, size and thickness; the insert features a 2.38 mm plate thickness and a central fastening interface with a cylindrical bore plus single-side countersink (40°–60°) to ensure repeatable seating and clamping. The 7° relief angle helps avoid rubbing in typical turning setups, while the standard ISO form facilitates selection of readily available holders and clamping sets. These design choices translate into stable chip formation and consistent part quality when the correct chipbreaker and grade are paired with the workpiece and machine stability. Practical machining benefits and process efficiency in production Used in both external and internal turning, the insert’s one-sided chipbreaker and its coated cermet construction support predictable chips and a high-quality surface finish under light-cutting conditions. The combination of a standardised ISO format and the modern GT9530 grade supports efficient inventory management and fast tool changes on the shop floor. Where stable fixturing and moderate machining parameters prevail, this solution can lower overall tooling costs through longer service intervals and fewer interruptions, improving throughput and repeatability across batches. For application advice or to secure supply of the Tungaloy TCMT110208 GT9530 coated cermet insert, contact Metav Werkzeuge via info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6998350 Manufacturer SKU: TUN6998350 Model designation: TCMT110208 Brand: Tungaloy Facts Corner radius: 0.8 mm Geometry angle: 60° Relief angle: 7° Plate thickness: 2.38 mm Plate size: 11 mm Special features Coated cermet grade GT9530 Carbide substrate One-sided chipbreaker Central mounting hole: cylindrical bore + single-side countersink (40°–60°) ISO triangular insert for turning Model series: ISO turning indexable inserts Application: finishing and light universal turning in steel FAQ What machining tasks is this insert intended for? The TCMT110208 GT9530 Tungaloy insert is intended for finishing and light universal turning operations in steel, including both external and internal turning where a fine surface finish is required. How does the GT9530 grade affect tool life and surface finish? GT9530 is a coated cermet grade that provides increased wear resistance for finishing applications; the result is improved surface quality and extended service life compared with untreated materials when used in stable cutting conditions. Which holders are compatible with this ISO triangular insert? Compatibility depends on geometry, relief angle, tolerance class, fastening method, size and thickness; the ISO triangular form and central hole of this insert permit use with standard ISO-compatible holders designed for the TCMT form. Why is the central hole and countersink important? The central cylindrical bore with a single-side countersink (40°–60°) ensures secure, repeatable clamping and correct seating of the insert, reducing the risk of movement during cutting and supporting consistent component quality. Is this insert suitable for heavy roughing cuts? This insert has been specified as a wear-resistant finishing to light universal grade; for heavy roughing, a different grade or geometry optimised for high chip loads should be selected. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCMT 110208 NS9530 Wendeplatten - Tungaloy
Take advantage of the NS9530 finishing grade and the uncoated cermet cutting material for consistently high surface quality and low cutting forces; compatibility with ISO holders ensures smooth integration into existing tool systems — order directly via Metav Werkzeuge or consult the technical advisors for selection support. TCMT 110208 NS9530 Turning insert by Tungaloy – finishing grade, 60° triangular TCMT110208 NS9530 Tungaloy turning insert designed for precision finishing of steel parts with a sharp cutting edge and low cutting forces in continuous turning operations. Finishing grade NS9530 for steel Uncoated cermet for high surface finish Sharp edge reduces cutting forces ISO triangular 60° geometry with hole Delivering precision finishes with minimal cutting forces The TCMT110208 insert combines an uncoated cermet grade with a finely honed cutting edge to produce superior surface finishes on steel. As a finishing grade, NS9530 is engineered for continuous cutting and small depths of cut, which translates into lower cutting forces and reduced vibration. This results in improved dimensional stability and fewer secondary operations. The triangular 60° geometry with a central hole provides stable clamping and repeatable seating in ISO-compatible holders, supporting consistent part quality across production runs. Easy integration and predictable performance in production Compatibility is determined by form, clearance angle, tolerance class, fixation method, size and thickness; the insert’s ISO-conform geometry simplifies retrofit into existing tooling systems. The moderate clearance angle of 7° and the 0.8 mm corner radius are optimised for finishing passes on steel, offering a balance between edge strength and surface quality. Selecting the correct chipbreaker and grade for the workpiece material and machining stability yields predictable cycle times and improved process reliability, promoting efficient throughput in both batch and continuous manufacture. Practical selection guidance for workshop use For finishing applications choose the NS9530 grade when the priority is a high-quality surface and low forces rather than heavy metal removal. The insert features a single-sided chipbreaker and a cylindrical hole with a single-sided countersink (40°–60°), enabling secure fixing and straightforward orientation during tool changes. Where machining parameters need verification, consult the datasheet for recommended feeds and speeds for steel; for additional technical clarification, Metav Werkzeuge offers expert guidance to match insert grade, chipbreaker and holder in order to reduce setup time and scrap rates. Contact Metav Werkzeuge for tailored advice on selecting the right Tungaloy finishing insert and to arrange prompt delivery via their technical sales team at Metav Werkzeuge Technical data Article number: 6998517 SKU: 6998517-Tungaloy Manufacturer SKU: TUN6998517 Manufacturer article number: 6998517 Model series: ISO turning indexable inserts ISO designation: TCMT110208 Core dimensions Size: 11 mm Thickness: 2.38 mm Corner radius: 0.8 mm Clearance angle: 7° Included angle: 60° Materials and features Material: carbide Grade: NS9530 (uncoated cermet) Chipbreaker: one-sided Hole: with hole Hole detail: cylindrical hole + single-sided countersink (40°–60°) Shape: triangular Application: turning FAQ What machining tasks is this insert best suited for? This insert is intended for finishing operations on steel; the NS9530 uncoated cermet provides a sharp cutting edge and low cutting forces for continuous cuts and small depths of cut. Which holder types are compatible with this insert? Compatibility depends on form, clearance angle, tolerance class, fixation, size and thickness; the ISO triangular 60° geometry and central hole of the TCMT110208 enable use with standard ISO-compatible external holders and boring bars. Can the NS9530 grade be used for interrupted cuts? NS9530 is optimised for continuous turning and small depths; for heavily interrupted cuts a more robust grade or edge preparation is recommended rather than this finishing grade. What are the key dimensions to check when fitting the insert? Check size (11 mm), thickness (2.38 mm), corner radius (0.8 mm), clearance angle (7°) and the 60° triangular seating angle to ensure correct fit and stability. Is coolant recommended with this uncoated cermet? Coolant strategy depends on the machining setup and material; NS9530 is primarily a finishing grade for steel where controlled cutting conditions yield the best surface; consult Metav Werkzeuge for parameter suggestions. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCMT 110208 NS9530 Wendeplatten - Tungaloy
High-precision finishing with an uncoated cermet grade and ISO compatibility ensures low cutting forces and superior surface finish; the triangular form with a 0.8 mm corner radius and 7° relief gives reliable seat and repeatable results. Order the TCMT110208 NS9530 Tungaloy insert directly via Metav Werkzeuge or ask our consultants if needed. TCMT110208 NS9530 — Tungaloy ISO turning insert, uncoated cermet, finishing grade The TCMT110208 NS9530 Tungaloy insert is an ISO-standard triangular turning insert intended for finishing operations on steel, offering a sharp cutting edge and stable chip control for continuous cuts. *Uncoated cermet finishing grade NS9530 *Sharp cutting edge and low cutting forces *ISO TCMT 110208 triangular insert form *Single-sided chipbreaker, cylindrical hole Consistent finishing performance for steel turning The insert is designed as a finishing grade made from uncoated cermet (NS9530), which provides a sharp cutting edge and inherently low cutting forces. These properties translate into reduced tool-induced vibration and a better initial surface, so fewer rework cycles are required. The material choice is particularly effective for continuous cutting and small depth-of-cut operations where surface quality is critical. By selecting a finishing cermet, machining cycles can achieve tighter surface tolerances without resorting to additional polishing steps, supporting a more efficient production flow. ISO form and holder compatibility for predictable setup Compatibility with clamping systems is governed by the insert form, relief angle, tolerance class, fastening style, size and thickness. The triangular ISO TCMT 110208 form, with a 7° relief and an inscribed circle of 11 mm, ensures predictable seating in ISO-compliant holders. The insert thickness of 2.38 mm and the cylindrical hole with one-sided countersink (40°–60°) provide secure fastening and repeatable orientation, reducing indexing variability. These measurable attributes simplify tool management in batch production and make integration into existing tool systems straightforward. Operational benefits: selectivity, productivity and process stability Choosing the single-sided chipbreaker and the appropriate grades for the workpiece enables stable chip formation and reduced burr. The small 0.8 mm corner radius supports fine finishing while maintaining edge strength during light cuts. Together, these characteristics improve cycle time and lower scrap rates by enhancing dimensional accuracy in finishing passes. For process planners, the combination of low cutting forces and reliable chip control can permit slightly higher feeds at the same surface finish, increasing throughput without compromising quality. Proven quality and practical system use Manufactured to ISO geometry standards, the insert delivers repeatable edge life and consistent performance across batches. The combination of a cermet substrate and a precisely ground sharp edge ensures dependable results on steel finishing tasks, while the ISO designation allows confident selection of compatible holders and clamping hardware. If additional guidance is required on matching a chipbreaker or selecting the correct holder form and tolerance class, Metav Werkzeuge’s technical advisers are available to provide application-oriented recommendations and clarification of system assembly. Contact Metav Werkzeuge for tailored advice on applying the Tungaloy TCMT110208 NS9530 insert in finishing operations, or to request availability and delivery options via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6998514 Manufacturer SKU: TUN6998514 Manufacturer article number: 6998514 Brand: Tungaloy Model series: ISO-Drehwendeschneidplatten Insert designation: TCMT110208 Facts Corner radius: 0.8 mm Included angle: 60° Relief angle: 7° Plate thickness: 2.38 mm Size (inscribed circle): 11 mm Special features Material: carbide Grade/coating: NS9530 (uncoated cermet) Plate form: triangular Hole style: cylindrical hole with one-sided countersink (40°–60°) Chipbreaker: single-sided Typical application: turning (finishing) System: ISO turning insert, compatibility by form, clearance, tolerance, fastening, size and thickness FAQ What materials is this insert suitable for? The TCMT110208 NS9530 insert is formulated as a finishing grade for steel; the uncoated cermet substrate offers a sharp edge and low cutting forces suited to continuous finishing operations on steel. How does the insert secure to the holder? This ISO triangular insert uses a cylindrical hole with a one-sided countersink (40°–60°) and the standard TCMT seating geometry to ensure firm clamping and repeatable orientation in compatible holders. Which chipbreaker type is included and why does it matter? The insert features a single-sided chipbreaker, optimised for stable chip control during finishing; choosing the correct chipbreaker supports consistent chips and reduces the risk of surface damage. What are the key dimensional parameters to check for compatibility? Check the insert’s inscribed circle (11 mm), thickness (2.38 mm), relief (7°) and corner radius (0.8 mm) against the holder specifications to ensure proper fit and performance. Is this insert suitable for interrupted cuts or heavy roughing? The NS9530 cermet finishing grade is optimised for continuous finishing and small depths of cut; for interrupted cuts or heavy roughing, a more robust grade or geometry is recommended. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCMT 110208 T5115 Wendeplatten - Tungaloy
Take advantage of CVD-coated carbide T5115 for balanced wear resistance and edge stability, the 60° ISO triangular geometry with a 0.8 mm corner radius for precise turning, and secure mounting via the cylindrical hole with one-sided countersink — order directly via Metav Werkzeuge or ask our consultants for application advice. TCMT 110208 T5115 indexable turning insert (for turning) by Tungaloy — CVD-coated carbide, for cast iron A TCMT 110208 T5115 indexable insert designed for ISO-standard external and internal turning of cast iron, offering a triangular form with a cylindrical hole and single-sided chipbreaker for stable cutting performance. ISO triangular insert TCMT 110208, 60° geometry CVD-coated carbide grade T5115 for cast iron 0.8 mm corner radius, single-sided chipbreaker Cylindrical hole with one-sided countersink Reliable cutting performance for cast-iron machining The CVD-coated carbide grade T5115 combines wear resistance with edge stability, making it suitable for a wide range of cast-iron turning tasks. With a balanced coating and substrate composition, the grade reduces flank wear while maintaining a robust cutting edge under varying cutting forces. The 0.8 mm corner radius and 60° insert angle contribute to consistent chip formation and predictable tool life, supporting productive machining cycles and fewer indexings. Precise fit and secure clamping for ISO systems The insert is manufactured to ISO dimensions, ensuring compatibility with standard toolholders when matched by form, relief angle, tolerance class, fastening, size and thickness. The design includes a cylindrical hole with a single-sided countersink (40°–60°) to improve seating stability in the pocket and simplify assembly. The 7° relief angle and nominal 2.38 mm thickness promote reliable load transfer between insert and holder, reducing vibration and helping to maintain surface finish quality during both external and internal turning operations. Practical machining advice and application scope Intended for external and internal turning, the triangular insert with a single-sided chipbreaker suits a range of roughing and finishing steps in cast-iron components when paired with the correct holder and cutting parameters. Selection of the chipbreaker and grade should be aligned with workpiece stability and the intended machining operation; this ensures optimal chip control and surface integrity. The system approach — insert, matching holder, shim and clamping set — facilitates quick replacement and reduced downtime in production environments. Choose Tungaloy T5115 inserts for consistent cast-iron performance — contact Metav Werkzeuge for tailored application advice at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6864552 Manufacturer SKU: TUN6864552 Model series: ISO turning indexable inserts Material: carbide Facts Insert designation: TCMT110208 Grade: T5115 Geometry angle: 60° Relief angle: 7° Corner radius: 0.8 mm Thickness: 2.38 mm Size: 11 Special features CVD-coated carbide Triangular insert with cylindrical hole Hole style: cylindrical hole + one-sided countersink (40°–60°) Single-sided chipbreaker Universal grade optimised for cast iron ISO-normalised compatibility with standard holders FAQ What materials is this insert suitable for? The TCMT110208 T5115 insert is a CVD-coated carbide grade developed primarily for cast iron machining, offering a balanced combination of wear resistance and edge stability for reliable turning operations. How does the hole style affect mounting? The cylindrical hole with a one-sided countersink (40°–60°) provides a secure seating in compatible toolholders, improving clamping stability and reducing the risk of movement under cutting loads when using the TCMT 110208 T5115 insert. Which chipbreaker is integrated and when should it be used? This insert features a single-sided chipbreaker, which is suitable for stable turning applications where controlled chip formation and good surface finish are required; selecting the proper chipbreaker and parameters depends on workpiece rigidity and machining strategy. Can this insert be used for internal turning as well as external turning? Yes — the ISO-standard triangular form and the grade’s balanced properties allow use in both external and internal turning applications, provided the toolholder and setup match the insert’s geometry and dimensions. What are the key dimensions to check when selecting a compatible holder? When matching a holder for this insert, check the insert designation (TCMT110208), relief angle (7°), thickness (2.38 mm), size (11) and the hole/countersink style to ensure correct fit and clamping. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCMT 110208 T6215 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide, precise geometry and ISO compatibility to maintain consistent productivity in stainless-steel turning; order via Metav Werkzeuge or request specialist advice for optimal grade and chipbreaker selection. TCMT 110208 T6215 – ISO triangular turning insert for turning, CVD-coated carbide by Tungaloy The TCMT110208 T6215 is an ISO triangular turning insert engineered for stable to lightly interrupted turning of stainless steels, offering a robust cutting edge and consistent wear resistance CVD-coated carbide for wear resistance Single-sided chipbreaker for controlled chips 7° clearance angle for secure cutting ISO triangular form, 11 mm inscribed circle Consistent performance on stainless steels for predictable production The CVD-coated composition and T6215 grade provide high wear resistance and edge stability during prolonged turning operations on stainless steels. The coating reduces abrasive wear and helps maintain dimensional consistency part after part, which leads to fewer indexings and longer uninterrupted runs. This benefit is particularly relevant in batch production where component repeatability and minimal downtime increase overall throughput and lower effective tooling costs. Secure seat and clamping reduce setup-related variability Designed to the ISO standard, the insert’s triangle geometry and the central mounting hole with a one-sided countersink (40°–60°) enable positive, repeatable clamping in compatible toolholders. The combination of the 11 mm inscribed circle, 2.38 mm thickness and defined 7° clearance supports stable contact with minimal movement under cutting loads, reducing vibration and improving surface finish on turned components. Geometry and radius balanced for surface finish and tool life A 0.8 mm radius on the cutting edge balances edge strength with the ability to achieve tight radii on workpieces, while the single-sided chipbreaker assists reliable chip formation and evacuation during external and internal turning. The carbide substrate provides toughness for lightly interrupted cuts, and the CVD layer contributes to resistance against built-up edge, together extending tool life and preserving cutting performance over multiple re-indexings. Contact Metav Werkzeuge for tailored advice on the Tungaloy TCMT110208 T6215 insert and for assistance with holder compatibility: info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: 6876555 Manufacturer SKU: TUN6876555 SKU: 6876555-Tungaloy Numerical data Inscribed circle: 11 mm Thickness: 2.38 mm Corner radius: 0.8 mm Clearance angle: 7° Included angle: 60° Materials & features Material: carbide Coating: CVD-coated Application: Turning Grade: T6215 Chipbreaker: single-sided Mounting: with hole; cylindrical hole + one-sided countersink (40°–60°) ISO designation: TCMT110208 Model series: ISO turning inserts Geometry: triangular FAQ What materials is this insert designed for? The TCMT110208 T6215 insert is specified for turning stainless steels under stable to lightly interrupted cutting conditions. Which chip control is provided by this insert? This insert features a single-sided chipbreaker, optimised to produce controlled chips for external and internal turning operations. What are the key geometry dimensions for holder compatibility? Key dimensions are an 11 mm inscribed circle, 2.38 mm thickness, 0.8 mm corner radius and the central hole with one-sided countersink (40°–60°) for secure clamping. Is the cutting material coated and what does that mean for tool life? The insert is CVD-coated carbide (grade T6215), which increases abrasion resistance and helps maintain cutting-edge integrity, extending tool life in demanding stainless-steel machining. Can this insert be used for interrupted cuts? The T6215 grade is suitable for stable to lightly interrupted conditions; heavy interruptions may require a different grade or tougher geometry. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCMT 110208 T6215 Wendeplatten - Tungaloy
Benefit from the combination of CVD-coated carbide grade T6215 and precise geometry—0.8 mm corner radius with a 7° clearance angle—for dependable stainless-steel turning and extended tool life; order through Metav Werkzeuge or consult their technicians for application support. TCMT 110208 T6215 ISO triangular turning insert by Tungaloy — CVD-coated carbide, 7° clearance The TCMT110208 T6215 is an ISO triangular turning insert engineered for external and internal turning, optimised for rostfreier Stahl under stable to slightly interrupted cutting conditions. CVD-coated carbide for wear resistance Suitable for turning stainless steels Triangular insert with 0.8 mm corner radius Reliable wear resistance for consistent machining The TCMT110208 indexable plate combines a CVD-coated surface with the T6215 carbide grade to deliver high wear resistance and predictable tool life in serial production. The chemical vapour deposition process produces a hard, adherent coating that reduces flank wear and improves resistance to built-up edge, which is especially beneficial when machining stainless alloys. Fewer interruptions for insert changes lead to higher machine uptime and more consistent part quality. Precise geometry for stable cutting and secure clamping The triangular geometry and the 0.8 mm corner radius support firm engagement at the cutting edge while preserving edge strength. A 7° clearance angle and a plate thickness of 2.38 mm contribute to stable contact with the workpiece and reduced rubbing, improving surface finish. The insert features a cylindrical hole with a one-sided countersink (40°–60°) that ensures correct seating in compatible toolholders; compatibility depends on form, clearance angle, tolerance class, fastening method, size and thickness, enabling reliable clamping and reproducible results across tool changes. Practical selection and efficient use in turning operations Designed for turning operations, the plate is fitted with a single-sided chipbreaker suited to stable or lightly interrupted cuts in stainless steel; selecting a matching chipbreaker and holder ensures effective chip control and reduced risk of surface damage. As part of a system—indexable plate, appropriate external holder or boring bar, shim/clamping set and replacement screws—this insert simplifies inventory while delivering economical performance per part. The ISO format facilitates straightforward replacement and predictable process parameters for production environments. For secure supply of Tungaloy’s TCMT110208 T6215 inserts and practical guidance on holder compatibility, contact Metav Werkzeuge for tailored advice and rapid delivery — eMail: info@metav-werkzeuge.com or Telefon: +49 2822 7131930 Technical data Manufacturer item number: 6876458 SKU: 6876458-Tungaloy Manufacturer SKU: TUN6876458 ISO designation: TCMT110208 Article name: TCMT110208 T6215 Tungaloy insert Facts Corner radius: 0.8 mm Clearance angle: 7° Thickness: 2.38 mm Inscribed circle / size: 11 mm Wedge angle: 60° Special features CVD-coated carbide (T6215) Triangular plate form Cylindrical hole with one-sided countersink 40°–60° Single-sided chipbreaker For turning; suitable for stainless steel under stable to slightly interrupted conditions System components: compatible holders, shim/clamping set and replacement screws FAQ What holder types are compatible with this insert? Compatibility is determined by the insert form and dimensions; TCMT110208 requires holders matching its triangular form, 7° clearance, 11 mm size and 2.38 mm thickness for secure clamping. Is this insert suitable for interrupted cuts in stainless steel? The T6215 grade and single-sided chipbreaker are intended for stable to slightly interrupted conditions in rostfreier Stahl, offering good edge stability under moderate interruptions. How does the hole and countersink affect mounting? The cylindrical hole with a one-sided countersink (40°–60°) ensures precise seating and repeatable clamping when used with the corresponding screws and clamping set, reducing the risk of misalignment. Which machining tasks is this plate designed for? This ISO triangular indexable plate is designed for both external and internal turning applications where reliable chip control and wear resistance are required. What advantages does the CVD coating provide? A CVD-coated surface on the T6215 carbide improves thermal stability and resistance to abrasive wear, which helps maintain cutting-edge integrity and consistent component quality over longer cycles. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCMT 110208 T9215 Wendeplatten - Tungaloy
Benefit from CVD-coated T9215 wear resistance combined with a 0.8 mm corner radius and ISO conformity for steady, productive turning cycles; order original inserts or consult Metav Werkzeuge for cutting data and logistics. TCMT 110208 T9215 turning insert by Tungaloy (60°) The TCMT 110208 T9215 is an ISO-standard triangular carbide insert for turning, optimised for medium-steel machining in continuous to slightly interrupted cuts. ISO-standard triangular insert, 60° geometry CVD-coated carbide grade T9215 0.8 mm corner radius for balanced edge Suitable for continuous to slight interrupted cuts Increased productivity through abrasion resistance and stability The combination of a CVD-coated surface and a carbide substrate in the T9215 grade delivers a clear productivity advantage for medium-steel turning: the coating increases wear resistance, while the substrate and grade balance fracture toughness for sustained machining at higher feed rates. This results in fewer indexings and longer tool life compared with uncoated grades, meaning more parts per index and improved throughput. The 60° insert geometry promotes stable cutting forces in external and internal turning operations, supporting predictable cycle times. Accurate fit and faster tool set-up to reduce downtime ISO standardisation ensures compatibility with a broad range of holders; fit is governed by insert form, clearance angle, tolerance class, fixing and plate thickness. The 2.38 mm thickness and triangular format enable secure clamping in standard seats, while the with cylindrical hole + one-sided countersink arrangement simplifies repeatable locating and tightening. Clear technical data and consistent dimensions reduce set-up iterations, shortening downtime and enabling smoother production transitions between operations and machines. Application-focused reliability and practical guidance Designed primarily for turning in medium steel, the insert’s single-sided chipbreaker and 0.8 mm corner radius offer a trade-off between edge strength and surface finish: a modest radius for robust edges while maintaining acceptable surface quality. The grade is suitable for continuous to slightly interrupted cuts and is a reliable choice when productivity and predictable wear behaviour are priorities. For process planning, match the chipbreaker and grade to workpiece material and cutting conditions; cutting data supplied by Metav Werkzeuge can be used to refine speeds and feeds for optimal results. For original Tungaloy performance and tailored cutting recommendations, contact Metav Werkzeuge for technical support and supply via info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6774001 Manufacturer SKU: TUN6774001 Label: TCMT110208 T9215 Tungaloy-turning insert Model series: ISO turning inserts Material: carbide Coating: CVD Facts Insert angle: 60° Thickness: 2.38 mm Inscribed circle / size: 11 mm Corner radius: 0.8 mm Clearance angle: 7° Countersink angle: 40°–60° Design & Features Triangular insert shape Single-sided chipbreaker With cylindrical hole and one-sided countersink ISO-standardised compatibility Suited for turning in medium steel Suitable for continuous to slightly interrupted cuts FAQ What materials is this insert intended for? The TCMT 110208 T9215 insert is specified for medium-steel machining; the T9215 grade combines wear resistance and fracture toughness for productive turning in that material class. What is the corner radius and how does it affect performance? The insert features a 0.8 mm corner radius, which gives the cutting edge additional strength for interrupted cuts while maintaining a balance between surface finish and edge robustness for general turning. Which holders and setups are compatible with this insert? Compatibility follows ISO norms; the TCMT 110208 T9215 requires a matching triangular seat, appropriate clearance angle (7°), correct tolerance class and a clamping system that accepts a cylindrical hole with a single-sided countersink. Is the coating suitable for high-productivity machining? Yes, the CVD-coated carbide in the TCMT 110208 T9215 is chosen to enhance wear resistance under higher cutting volumes and stable cutting conditions, supporting continuous to slightly interrupted cuts. How is the insert secured and what is the hole style? The insert is supplied with a cylindrical hole and a one-sided countersink (40°–60°) to permit secure, repeatable screw clamping and consistent seating in standard ISO holders. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCMT 110208 T9215 Wendeplatten - Tungaloy
Take advantage of the combination of high wear resistance, a balanced 0.8 mm nose radius and ISO compatibility for reliable, productive turning operations; order directly via Metav Werkzeuge or request consultation for toolholder matching. TCMT110208 T9215 — TCMT 110208 T9215 indexable turning insert (Tungaloy) CVD-coated carbide, triangular 60° geometry TCMT110208 T9215 is a triangular indexable turning insert designed for general-purpose turning in medium steels; suitable for both external and internal turning where stable chip control and consistent edge life are required ISO triangular 60° insert CVD-coated carbide grade T9215 0.8 mm nose radius for balanced results One-sided chipbreaker for medium steel High productivity with wear-resistant grade The CVD-coated carbide grade T9215 combines elevated wear resistance with fracture toughness to sustain higher material removal rates in continuous to slightly interrupted cuts. This makes the insert particularly effective for medium steel machining where a balance of durability and edge stability is essential. The coating enhances tool life while maintaining dimensional stability across batches, reducing the frequency of index changes and supporting a continuous production flow. Geometry and holder compatibility explained The triangular 60° form with a 0.8 mm nose radius and 7° clearance angle provides an adaptable geometry that produces a good surface finish while maintaining a strong cutting edge. The insert is supplied with a central hole and a one-sided countersink (40°–60°) to allow secure clamping in ISO-standard holders; compatibility depends on insert shape, clearance angle, tolerance class, fastening method, size and thickness. Selecting a matching holder ensures correct seat contact and repeatable alignment, which in turn improves cutting stability and component accuracy. Practical application guidance for turning Designed for turning operations, the insert excels in both external and internal passes when paired with an appropriate chipbreaker and stable setup. The single-sided chipbreaker helps manage chip formation for medium steels, promoting predictable evacuation and preventing entanglement. For best results, combine this insert with rigid fixturing and a holder suited to the intended cut depth and feed; this approach reduces vibration, extends edge life and supports consistent surface quality during extended production runs. Quality, traceability and workshop benefits The ISO designation and defined dimensions support straightforward replacement and inventory management in industrial settings. The insert’s construction from cemented carbide with a CVD coating ensures consistent performance part-to-part, lowering unplanned downtime. The article and manufacturer SKU enable clear ordering and stock control within procurement systems. For further technical clarification on holder matching or batch requirements, consult Metav Werkzeuge’s technical advisers who can assist with selection and compatibility details. For technical advice or to order this Tungaloy TCMT110208 T9215 indexable turning insert, contact Metav Werkzeuge for fast availability and guidance on holder compatibility Technical Data Article number: 6774003 Manufacturer SKU: TUN6774003 SKU: 6774003-Tungaloy Designation: TCMT110208 Model series: ISO turning inserts Manufacturer: Tungaloy Application: Turning Data Nose radius: 0.8 mm Plate thickness: 2.38 mm Plate size: 11 mm Included angle: 60° Clearance angle: 7° Countersink angle range: 40°–60° Special features Material: cemented carbide Coating / grade: T9215 (CVD-coated) Chipbreaker: one-sided Shape: triangular, 60° included angle Hole: cylindrical with one-sided countersink Suitable for: medium steel machining Typical use: external and internal turning System components: ISO insert, matching external holder or boring bar, shim/clamp set and replacement screws FAQ Which operations are best suited to this insert? The TCMT110208 T9215 indexable turning insert (Tungaloy, SKU 6774003-Tungaloy) is intended for external and internal turning operations, especially where continuous to slightly interrupted cuts in medium steels are performed. For which materials is the T9215 grade recommended? T9215 is formulated for medium steel applications; the CVD-coated carbide offers a blend of wear resistance and toughness that supports productive machining of common steels. How does the 0.8 mm nose radius influence results? A 0.8 mm nose radius on the insert provides a compromise between edge strength and surface finish, enabling stable cutting at moderate feeds while still permitting acceptable final surface quality. What determines compatibility with a toolholder? Compatibility requires matching the insert form, clearance angle, tolerance class, fastening method, size and thickness to the holder; correct seating of the TCMT110208 in an ISO holder ensures repeatable geometry and safe clamping. What does the designation TCMT110208 T9215 indicate? The code denotes a triangular ISO insert (TCMT), size and geometry (110208), plus the cutting grade/coating T9215, which signifies a CVD-coated carbide optimised for medium steel machining. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCMT 110208 T9215 Wendeplatten - Tungaloy
Benefit from the combination of CVD-coated carbide T9215 and a 60° ISO triangular form for productive medium-steel turning; the grade pairs wear resistance with fracture toughness to support continuous to slightly interrupted cuts. Order the TCMT110208 insert directly via Metav Werkzeuge or consult our advisors for process-adapted recommendations. TCMT 110208 T9215 Tungaloy turning insert for turning The TCMT110208 T9215 is an ISO‑standard triangular indexable insert designed for external and internal turning, combining a CVD‑coated carbide grade with a single‑sided chipbreaker for stable machining of medium steel. CVD-coated carbide for high wear resistance Reliable fracture toughness for continuous cuts ISO triangular 60° form, compatible with holders Single-sided chipbreaker, suited to medium steel Built for productive medium-steel turning The combination of a CVD‑coated carbide matrix and the T9215 grade provides high wear resistance while maintaining fracture toughness, which supports longer tool life and consistent part quality. The specification targets medium steel machining where sustained productivity is required; the coating improves resistance to abrasive wear and the substrate reduces the risk of chipping during steady or slightly interrupted cuts. Selecting this grade can reduce insert change‑overs and support higher cycle times without compromising surface finish. ISO compatibility and secure clamping for repeatable results Designed as an ISO‑standard indexable plate in a 60° triangular form, the insert features a 7° clearance angle and a plate thickness of 2.38 mm, ensuring mechanical compatibility with standard external holders and boring bars. The plate includes a cylindrical hole with a one‑sided countersink (40°–60°) for positive seating and repeatable clamping. These dimensional and form‑based standards help to maintain tool‑centre geometry and repeatability across re‑sets, reducing setup time and contributing to predictable process capability. Practical guidance for setup and chip control With a corner radius of 0.8 mm and a single‑sided chipbreaker, the insert delivers a good balance between edge strength and chip control for turning operations. For external finishing, the smaller radius improves surface integrity; for roughing, the robust geometry and chipbreaker support reliable chip formation. Match the chipbreaker and grade selection to machine stability and workpiece clamping: in less rigid setups, favour more conservative feeds and robust chipforming options to maintain process security. The design supports efficient swarf evacuation and helps to keep machining cycles productive and interruption‑free. For process‑reliable medium steel turning, choose the Tungaloy TCMT110208 T9215 insert and contact Metav Werkzeuge for tailored advice or to arrange supply via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6777820 Manufacturer SKU: TUN6777820 SKU: 6777820-Tungaloy Name: TCMT110208 T9215 Tungaloy-Wendeplatte Model series: ISO-Drehwendeschneidplatten Material: Carbide Facts Corner radius: 0.8 mm Included angle: 60° Relief angle: 7° Plate thickness: 2.38 mm Plate size: 11 ISO code: 110208 Special features Grade/coating: T9215, CVD‑coated carbide Chipbreaker: Single-sided Hole: Cylindrical hole + one-sided countersink (40°–60°) Plate form: Triangular Application: Turning (external and internal) Compatibility: Determined by form, clearance, tolerance, mounting, size and thickness FAQ What materials is this insert best suited for? The TCMT110208 T9215 insert is optimised for medium steel machining; the T9215 grade balances wear resistance and fracture toughness for productive turning. Can this insert be used for internal turning (boring)? Yes, the ISO triangular 60° form and the cylindrical hole with countersink allow use in compatible boring bars and internal holders that accept the TCMT110208 geometry. What does the single‑sided chipbreaker imply for machining? A single‑sided chipbreaker provides controlled chip formation in the intended cutting direction, improving evacuation and surface finish when paired with the correct feeds and speeds for the workpiece. How does the plate geometry affect setup accuracy? The standardised 60° geometry, 7° relief angle and precise hole/countersink ensure repeatable seating and clamping, which reduces variation when inserts are changed or re‑set. Which tools should be checked for compatibility before fitting this insert? Confirm holder form, clearance angle, tolerance class, fastening method, plate size and thickness against the TCMT110208 data; compatibility depends on all these parameters. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCMT 110208 T9215 Wendeplatten - Tungaloy
Take advantage of the combination of high wear resistance, fracture safety and ISO compatibility for consistent, productive turning operations. Order the insert directly via Metav Werkzeuge or consult the team for application-specific recommendations. TCMT 110208 T9215 — Tungaloy Turning Insert for Drehen, CVD-coated Carbide, 60° The TCMT 110208 T9215 is an ISO-standard triangular turning insert designed for external and internal turning; it features a 60° geometry, a 0.8 mm corner radius and a single-sided chipbreaker for reliable chip control. CVD-coated carbide for high wear resistance Optimised for medium steel machining productivity Triangular 60° geometry with 0.8 mm radius Single-sided chipbreaker with centre hole Sustained productivity through wear-resistant coating The CVD-coated carbide grade T9215 combines high wear resistance with good fracture safety, making it a rational choice for medium-duty steel turning where constant performance is required. The coating technology extends tool life under continuous and mildly interrupted cutting regimes, reducing tool change frequency and supporting higher component throughput. This results in steadier cycle times and a predictable maintenance rhythm for production cells. Reliable geometry for reproducible part quality A 60° insert geometry with a 0.8 mm corner radius provides a consistent engagement profile at the cutting edge, which contributes to dimensional stability and surface finish during both external and internal turning. The triangular shape enables three indexable cutting edges per insert, improving cost-efficiency. The single-sided chipbreaker design supports controlled chip formation, which lowers the risk of surface damage and improves swarf evacuation, particularly on medium-strength steels. Practical compatibility and handling to reduce downtime The insert is ISO-standard and therefore compatible with a broad range of ISO holders when form, clearance angle, tolerance class, fastening method, size and thickness match. The insert comes with a centre hole and a single-sided countersink (40°–60°), facilitating secure clamping and straightforward replacement. With a thickness of 2.38 mm and inscribed circle size 11, the component integrates into standard tool systems, enabling fast changeovers and predictable set-up times. Contact Metav Werkzeuge for tailored advice on cutting data and holder compatibility for this Tungaloy CVD-coated insert — eMail: info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6777779 SKU: 6777779-Tungaloy Manufacturer SKU: TUN6777779 Model series: ISO turning inserts Designation: TCMT110208 Facts Corner radius: 0.8 mm Thickness: 2.38 mm Inscribed circle size: 11 Relief angle: 7° Included angle: 60° Manufacturer article number: 6777779 Special features Material: carbide Coating: CVD Grade: T9215 Insert shape: triangular Chipbreaker: single-sided Hole style: with centre hole; cylindrical hole + single-sided countersink (40°–60°) Application: turning (external and internal) Best use: medium steel machining; continuous to slightly interrupted cuts FAQ What materials is this insert suited for? The insert is optimised for medium steel machining; the T9215 CVD-coated carbide provides wear resistance suitable for continuous and slightly interrupted turning of steels. Is the TCMT 110208 compatible with standard ISO holders? Compatibility with ISO holders depends on form, clearance angle, tolerance class, fastening, size and thickness; the TCMT110208 follows ISO dimensions and is compatible when those parameters match. Can this insert be used for interrupted cuts? Yes, the T9215 grade combines wear resistance with fracture safety and is suitable for continuous to mildly interrupted cuts under appropriate cutting parameters. How does the chipbreaker affect machining? The single-sided chipbreaker ensures consistent chip formation and evacuation, supporting surface quality and reducing the risk of chip-related damage during turning. How many edges are available per insert and what is the included angle? The triangular geometry provides three indexable edges per insert and an included angle of 60°, enabling economical edge rotation and reproducible cutting geometry. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCMT 110208 T9215 Wendeplatten - Tungaloy
Benefit from a combination of high wear resistance, secure clamping and ISO compatibility for efficient medium-steel turning — ideal for continuous to light interrupted cuts. Order the insert directly via Metav Werkzeuge or ask our consultants if technical support is required. TCMT110208 T9215 Tungaloy insert — ISO triangular turning insert, CVD-coated grade T9215 for turning The TCMT110208 T9215 Tungaloy insert is an ISO-standard triangular indexable insert designed for external and internal turning of medium steels, offering a balance of wear resistance and breakage safety. CVD-coated carbide grade T9215 Suited to medium steel machining ISO TCMT110208 triangular form Cylindrical hole with one-sided countersink Productivity and wear performance for medium-steel turning The insert delivers high wear resistance and reliable edge stability thanks to the CVD-coated carbide grade T9215, which is formulated for sustained productivity in continuous and slightly interrupted cuts. This combination reduces tool-change frequency and contributes to a lower cost per part in series production. The triangular geometry supports multiple indexing positions, extending usable insert life while maintaining consistent cutting performance. Where productivity matters, the proven material and coating pairing enables higher cutting parameters while retaining dimensional stability. Clamping reliability and geometry that simplifies set-up A secure clamping interface is essential for repeatable turning results; the insert is specified with a cylindrical hole plus a one-sided countersink (40°–60°) to ensure positive location in compliant holders. The triangular shape with a 60° included angle and a 0.8 mm corner radius provides a practical balance between edge strength and profile definition, suitable for general-purpose turning. With a 7° clearance angle and a plate thickness of 2.38 mm, the geometry supports stable cutting conditions and predictable chip flow, making set-up and process stabilisation faster on production lines. Choosing the right grade and chip control for consistent results The T9215 grade is designed as a first choice for medium steel machining, combining breakage resistance with high wear limits. The insert features a single-sided chipbreaker, optimised for regular turning operations in steel; selecting the correct chipbreaker and grade relative to the workpiece and machining stability helps avoid built-up edge and improves surface finish. Compatibility with ISO turning toolholders is determined by form, relief angle, tolerance class, fastening, size and thickness — the insert is built for straightforward integration into standard ISO turning systems, reducing complexity when adapting tooling inventories. For high-productivity turning in medium steels, contact Metav Werkzeuge to specify the TCMT110208 T9215 insert or to request tailored cutting data and holder recommendations. Technical data Article number: 6773993 SKU: 6773993-Tungaloy Manufacturer SKU: TUN6773993 Designation: TCMT110208 Model series: ISO turning indexable inserts Material: carbide Measurements Size: 11 mm Thickness: 2.38 mm Corner radius: 0.8 mm Clearance angle: 7° Included angle: 60° Hole: with cylindrical hole and one-sided countersink (40°–60°) Features Grade/coating: T9215 (CVD-coated carbide) Geometry: triangular insert form Chipbreaker: one-sided Application: turning (external and internal) Compatibility: ISO-standard insert format; fits external holders or boring bars Typical system setup: ISO insert, matching holder or boring bar, shim/clamp set and replacement screws FAQ What materials is this insert designed to machine? The TCMT110208 T9215 insert is intended primarily for medium steel machining; the T9215 grade combines wear resistance and breakage safety for continuous to light interrupted turns. How many cutting edges are available per insert? The triangular geometry provides multiple index positions; the number of usable edges corresponds to the three-sided form and re-indexing practice. Which clamping arrangements suit this insert? Secure clamping is achieved via the cylindrical hole with a one-sided countersink (40°–60°) and an appropriate ISO external holder or boring bar that matches the insert form and tolerance class. Is the grade suitable for interrupted cuts? Yes, the CVD-coated T9215 grade is suited to continuous and slightly interrupted cuts, offering a balance of breakage resistance and wear performance for production machining. How does the chipbreaker affect surface finish? The single-sided chipbreaker is optimised for standard turning operations in steel; correct pairing of chipbreaker and cutting data helps maintain consistent chip control and improves surface quality. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCMT 110208 T9225 Wendeplatten - Tungaloy
TCMT 110208 T9225 – Wendeplatte für Drehen von Tungaloy TCMT 110208 T9225 ist eine ISO-genormte Wendeplatte für das Außen- und Innendrehen, ausgelegt für mittlere bis schwere Stahlbearbeitung Universalsorte T9225 für wechselnde Schnittbedingungen CVD-beschichtetes Hartmetall für hohe Standzeit Dreieckige Platte, Plattengröße 11 mm Freiwinkel 7° und 60° Schneidkantenwinkel Mit Loch und einseitigem Spanbrecher Präzision und Standzeit für produktive Dreharbeiten Die T9225-Sorte kombiniert CVD-beschichtetes Hartmetall mit einer auf Zähigkeit optimierten Zusammensetzung, sodass die Wendeplatte zuverlässige Leistungen bei wechselnden Eingriffsbedingungen liefert. Durch die Beschichtung wird die Verschleißfestigkeit deutlich erhöht, was längere Werkzeugstandzeiten und weniger Rüstzyklen im Fertigungsprozess ermöglicht. Anwender profitieren von konstanter Bearbeitungsqualität selbst bei leicht unterbrochenem Schnitt. Konstruktion und Kompatibilität für einfache Handhabung Die TCMT110208-Ausführung ist ISO-genormt, dreieckig und verfügt über ein zylindrisches Loch mit einseitiger Senkung (40°–60°). Die Plattendicke 2,38 mm, die Plattengröße 11 mm und der Freiwinkel 7° bestimmen die Kompatibilität zu Außenhaltern und Bohrstangen. Die Auswahl des passenden Halters richtet sich nach Form, Freiwinkel, Toleranzklasse, Befestigung, Größe und Dicke; so lässt sich die Wendeplatte schnell und sicher montieren. Zur Erklärung: Freiwinkel beschreibt den Winkel zwischen Werkzeugrückseite und Werkstückoberfläche, wichtig für Spanabfuhr und Schnittkräfte. Anwendungsempfehlung und Zielgruppe Für das Außen- und Innendrehen von Stahl ist die Platte mit einseitigem Spanbrecher geeignet; der Spanformer unterstützt kontrollierte Spanbildung und schützt die Schneide bei instabilen Schnitten. Empfohlen für Lohnfertiger, Maschinenbauer und Instandhalter, die eine robuste, universelle Lösung für wechselnde Bearbeitungsaufgaben suchen. Bei der Wahl von Sorte und Spanformer sollte auf Werkstoff, Bearbeitungsart und Maschinenvibrationen geachtet werden, um optimale Ergebnisse und Standzeiten zu erzielen. Empfehlung: Für zuverlässige Stahlbearbeitung die Tungaloy-Wendeplatte TCMT 110208 T9225 wählen und bei speziellen Einsatzfällen unsere technische Beratung kontaktieren: info@metav-werkzeuge.com, Telefon +49 2822 7131930 Produktmerkmale Artikelnummer: 6781324 Marke: Tungaloy Serie: ISO-Drehwendeschneidplatten Daten Radius: 0,8 mm Plattengröße: 11 mm Plattendicke: 2,38 mm Freiwinkel: 7° Schneidkantenwinkel: 60° Hersteller SKU: TUN6781324 Besonderheiten Material: Hartmetall Coating: CVD-beschichtet (CVD: Chemische Gasphasenabscheidung) Sorte: T9225 Plattenform: dreieckig Loch: mit Loch Lochstil: zylindrisches Loch + einseitige Senkung (40°–60°) Spanbrecher: einseitig Anwendung: Drehen Einsatz: Außen- und Innendrehen Systemaufbau: ISO-Drehplatte, passender Außenhalter oder Bohrstange, Unterlage/Klemmsatz und Ersatzschrauben FAQ Welche Werkstoffe lassen sich mit dieser Wendeplatte bearbeiten? Die Wendeplatte TCMT 110208 T9225 von Tungaloy ist für mittlere bis schwere Stahlbearbeitung konstruiert und eignet sich besonders bei wechselnden Schnittbedingungen; für Sonderwerkstoffe sollten spezifische Sorten geprüft werden. Wie wirkt sich die CVD-Beschichtung auf die Standzeit aus? Die CVD-beschichtung der Tungaloy-Wendeplatte erhöht die Verschleißfestigkeit und führt in der Regel zu längeren Werkzeugstandzeiten sowie konstanter Oberflächengüte bei Serienläufen. Welche Rolle spielt der Spanbrecher bei der TCMT 110208 T9225? Der einseitige Spanbrecher sorgt für kontrollierte Spanbildung und reduziert das Risiko von Spanverwicklungen, was besonders bei instabilen Schnitten die Bearbeitungsqualität verbessert. Ist die Wendeplatte mit Standard-ISO-Haltern kompatibel? Ja, die TCMT110208 entspricht ISO-Normen; Kompatibilität hängt von Form, Freiwinkel, Toleranzklasse und Befestigungsart des Halters ab. Die technischen Daten helfen bei der passenden Auswahl. Wie werden Freiwinkel und Plattendicke bei der Anwendung berücksichtigt? Der Freiwinkel von 7° und die Plattendicke 2,38 mm beeinflussen Schnittkräfte und Stabilität; für schwere Schnitte sollte ein stabiler Halter und die passende Spanformer-Geometrie gewählt werden. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
TCMT 110208 T9225 Wendeplatten - Tungaloy
Take advantage of the combination of a CVD-coated cemented carbide grade engineered for medium-to-heavy steel turning and ISO-compatible geometry for dependable tool life and stable cutting conditions; order the inserts directly via Metav Werkzeuge or consult the team for application advice. TCMT 110208 T9225 — ISO turning insert, triangular 11 mm, Tungaloy The TCMT 110208 T9225 is an ISO-standard triangular indexable insert designed for general-purpose turning applications, offering robustness for medium to heavy steel machining. CVD-coated carbide for enhanced wear resistance Robust universal grade T9225 for medium–heavy steel 0.8 mm corner radius for secure engagement Triangular ISO insert with 11 mm inscribed circle Consistent productivity from a robust CVD-coated grade The insert’s CVD-coated cemented carbide composition and the T9225 grade are specified for reliable performance in demanding turning operations. This combination provides increased wear resistance and a stable cutting edge, which translates into fewer indexings and longer effective tool life. For production environments where changing engagement conditions or slightly interrupted cuts occur, the universal T9225 offers the toughness required to maintain throughput and reduce machining interruptions without sacrificing surface quality. Clear compatibility and secure mounting for simple integration Compatibility with the chosen holder is determined by seat form, clearance angle, tolerance class, fixation method, size and thickness. The triangular geometry with an 11 mm inscribed circle and a 2.38 mm thickness ensures straightforward fitment into ISO-standard external holders or boring bars. The insert is supplied with a cylindrical hole and a one-sided countersink (40°–60°), enabling positive clamping and repeatable seating in typical clamping systems. These attributes reduce setup time and support predictable, reproducible tool behaviour across batches. Improved chip control and stability for interrupted cuts A 0.8 mm corner radius combined with a single-sided chipbreaker delivers controlled chip formation and reduces vibration during varying cutting conditions. The chipbreaker design assists in breaking and evacuating swarf, which benefits both surface finish and tool life when turning steels under moderate to heavy depths of cut. For operations that require occasional interrupted cuts or non-uniform engagement, the insert’s geometry and chip control lower the risk of edge failure and help sustain dimensional accuracy. Practical handling and economic advantages in the workshop Using an indexable insert of this specification simplifies inventory and tool management: fewer full-tool changes are needed, and indexing restores cutting performance quickly. The ISO-standard design and universal grade make this insert a versatile component for mixed-production environments, reducing machine downtime and contributing to lower overall machining costs. The article is listed under SKU 6781042-Tungaloy and is compatible with standard ISO turning tool systems, supporting efficient replacement and traceability in workshop stock records. For reliable medium-to-heavy steel turning with Tungaloy technology, contact Metav Werkzeuge for detailed compatibility checks or to place an order by email at info@metav-werkzeuge.com or by phone at +49 2822 7131930. Technical data Article number: 6781042 Manufacturer SKU: TUN6781042 SKU: 6781042-Tungaloy Model series: ISO-Drehwendeschneidplatten Designation: TCMT110208 T9225 Tungaloy insert Material: Cemented carbide Grade/coating: CVD-coated, T9225 Insert form: Triangular Facts Inscribed circle: 11 mm Thickness: 2.38 mm Corner radius: 0.8 mm Clearance angle: 7° Included angle: 60° Hole: with hole Special features Cylindrical hole with one-sided countersink (40°–60°) Single-sided chipbreaker Suitable for turning applications Designed for medium–heavy steel machining System compatibility determined by form, clearance angle, tolerance class, fixation, size and thickness FAQ What materials is this insert intended for? The insert is intended primarily for medium to heavy steel machining; the T9225 grade and CVD-coated cemented carbide make it suitable for varying engagement conditions in steel turning. How does the chipbreaker affect performance? The single-sided chipbreaker improves chip control and evacuation, which enhances surface finish and reduces cutting forces during interrupted or variable cuts. Which holders are compatible with this ISO insert? Compatibility depends on seat form, clearance angle, tolerance class, fixation, size and thickness; the triangular ISO geometry and the cylindrical hole with countersink ensure fitment in standard ISO turning holders. What are the key dimensional specifications to check before ordering? Important dimensions include the 11 mm inscribed circle, 2.38 mm thickness, 0.8 mm corner radius and the 7° clearance; verifying these ensures correct seating and performance. Is this insert suitable for interrupted cuts and unstable engagement? Yes, the robust T9225 grade and the insert geometry provide the toughness and chip control required for slightly interrupted or unstable cutting conditions. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCMT 110208 T9225 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide robustness, T9225 grade toughness and precise ISO compatibility for reliable medium to heavy turning operations; order the TCMT110208 T9225 insert directly via Metav Werkzeuge or ask the consultants for tailored cutting data. TCMT 110208 T9225 – Tungaloy turning indexable insert, CVD-coated carbide, 7° clearance A TCMT110208 T9225 indexable turning insert designed for ISO-compatible external and internal turning, offering a robust universal grade for interrupted and variable cutting conditions ISO TCMT geometry for universal turning CVD-coated carbide grade T9225 for robustness 7° clearance and cylindrical hole with countersink Triangular 11 mm plate with 0.8 mm nose radius High reliability for medium to heavy Stahl turning The T9225 grade is a CVD-coated carbide engineered for a balance of toughness and wear resistance in medium to heavy Stahl machining. Its composition supports stable chip formation under variable engagement and interrupted cuts, reducing the risk of edge chipping and unplanned tool changes. Compatibility with ISO holder standards ensures that form, clearance angle, tolerance class, fastening method, plate size and thickness match the toolholder system; this predictability helps maintain a steady production rhythm and consistent component quality. Predictable surface finish and efficient chip control A triangular plate with a 0.8 mm nose radius and a dedicated one-sided chipbreaker delivers a compromise between strength and finish. The 7° clearance minimises rubbing while the cylindrical centre hole with a single-side countersink (40°–60°) enables secure clamping and repeatable seating, which contributes to consistent surface integrity and extended edge life. Fewer indexing cycles translate to lower machine downtime and a clearer cost-benefit profile for serial production runs. System integration and practical handling advice The insert forms part of a system comprising the ISO insert itself, a matching external holder or boring bar, a seat/clamp set and replacement screws. The plate thickness of 2.38 mm and the 11 mm inscribed circle determine holder choice; adherence to the ISO geometry secures mechanical fit and repeatable positioning. Selection of a suitable chipbreaker and holder rigidity according to machining stability will maximise tool life and process efficiency. Selection help is available from Metav Werkzeuge consultants for cutting-parameter suggestions and holder matching. For reliable medium to heavy Stahl turning with the T9225 grade, contact Metav Werkzeuge for tailored cutting data and supply. Technical data Article number: 6781489 Manufacturer article number: 6781489 SKU: 6781489-Tungaloy Manufacturer SKU: TUN6781489 Model series: ISO-Drehwendeschneidplatten Facts Plate designation: TCMT110208 Plate size: 11 mm Plate thickness: 2.38 mm Corner radius: 0.8 mm Included angle: 60° Clearance angle: 7° Hole: cylindrical hole + one-sided countersink (40°–60°) Special features Material: carbide (Hartmetall) Coating: CVD-coated Grade: T9225 Plate form: triangular Chipbreaker: one-sided Intended application: turning (Drehen) System components: indexable insert, holder/boring bar, seat/clamp set, replacement screws FAQ Which materials are suitable for this insert? The TCMT110208 T9225 Tungaloy turning insert is optimised for medium to heavy Stahl machining; its CVD coating and universal grade provide reliable performance across a broad range of common steels. What is the clearance and included angle of the insert? The insert features a 7° clearance angle and an included angle of 60°, which together support stable cutting and effective edge strength. How is the insert clamped and what hole style does it have? This plate uses a cylindrical hole with a one-sided countersink (40°–60°) for secure clamping and reproducible seating in ISO-compatible holders. How many cutting edges are available per plate? The triangular shape provides three usable cutting edges; indexing restores a fresh cutting edge without the need for regrinding. For which turning tasks is the chipbreaker suitable? The one-sided chipbreaker is intended to handle typical external and internal turning tasks, including interrupted cuts and varying engagement depths, when paired with appropriate holder rigidity. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com