TCMT 110302 T9225 Wendeplatten - Tungaloy
Take advantage of the CVD‑coated carbide in the T9225 grade together with the ISO TCMT110302 geometry for robust, repeatable performance in medium to heavy steel turning. The combination of toughness, a single‑sided chipbreaker and standard ISO dimensions ensures reliable chip control and straightforward retrofitting; order via Metav Werkzeuge or consult the team for holder matching and application advice. TCMT110302 T9225 indexable turning insert — CVD‑coated carbide, ISO triangular 60° (Tungaloy) The TCMT110302 T9225 is an ISO triangular indexable insert for turning, designed as a robust universal grade for medium to heavy steel machining where toughness and reliable chip control are required CVD-coated carbide grade T9225 Robust universal grade for steel machining ISO triangular TCMT 60° geometry With cylindrical hole and countersink Consistent performance from a CVD‑coated universal grade The CVD‑coated carbide substrate in grade T9225 delivers a balance of wear resistance and toughness tailored for demanding turning tasks. This makes the insert particularly suitable for medium to heavy steel machining and for situations with slightly interrupted cuts or variable engagement. The coating reduces flank wear under thermal load while the substrate resists chipping when conditions change, resulting in fewer unplanned tool changes and more consistent part quality. Clear, measurable improvements in tool life and process stability can be expected when the correct chipbreaker and clamping arrangement are selected. ISO geometry and secure clamping for straightforward integration The triangular ISO shape with a nominal 60° included angle, 7° clearance, 0.2 mm corner radius, and 3.18 mm plate thickness enables simple, reliable compatibility with ISO‑standard holders. The insert is supplied with a cylindrical hole and a one‑side countersink (40°–60°) to suit common clamping systems; the fit is determined by form, clearance angle, tolerance class, fixing method, size and thickness. These standardised dimensions assist in quick retrofitting to existing toolholders and minimise setup variability, so the machining system can maintain repeatable concentricity and clamping integrity without complex adapter plates. Practical productivity: chip control, system setup and application scope Equipped with a single‑sided chipbreaker, the insert supports controlled chip formation and evacuation at a wide range of cutting parameters, contributing directly to surface finish and machine uptime. The ISO insert forms part of a system that includes a matching external holder, shim/underlay and replacement screws; correct pairing reduces vibration and extends the life of both insert and workpiece fixture. For productive turning applications select the chipbreaker and grade according to material, cutting mode and machine rigidity to exploit the insert’s strengths in stable heavy cuts and in less stable conditions that require added toughness. The standardised design also simplifies stock management and interchangeability across machines. Contact Metav Werkzeuge for tailored application advice and matching toolholders for the Tungaloy TCMT110302; technical consultants are available to ensure correct grade and chipbreaker selection for specific steel turning applications Technical Data Article number: 6951433 SKU: 6951433-Tungaloy Manufacturer SKU: TUN6951433 Designation: TCMT110302 Key figures Plate thickness: 3.18 mm Plate size: 11 mm Corner radius: 0.2 mm Clearance angle: 7° Included angle: 60° Special features Material: carbide Coating: CVD‑coated Grade: T9225 (robust universal) Shape: triangular Chipbreaker: single‑sided Hole style: cylindrical hole + one‑side countersink (40°–60°) Application: turning Series: ISO‑standard indexable turning inserts FAQ What materials is this insert suited for? The Tungaloy TCMT110302 in grade T9225 is optimised for steel machining, especially medium to heavy cuts where a balance of wear resistance and toughness is required. How does the chipbreaker affect performance? The single‑sided chipbreaker on this insert promotes consistent chip formation and evacuation under a range of cutting conditions, improving surface finish and reducing risk of chip entanglement during turning operations. Will the insert fit existing ISO holders? Yes; the TCMT geometry and dimensions comply with ISO standards, but compatibility depends on holder form, clearance angle, tolerance class, fixing method, size and thickness—ensure the holder matches these parameters for secure clamping. How does the T9225 grade behave in interrupted cuts? Grade T9225 offers increased toughness suited to slightly interrupted cuts and variable engagement, reducing chipping and maintaining more stable tool life under changing load conditions. Is this insert reversible or indexable? The TCMT110302 is an indexable insert designed for indexing and replacement; use the specified clamping system and replacement screws within the tool system for correct installation. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCMT 110302 T9225 Wendeplatten - Tungaloy
Benefit from the combination of CVD-coated cemented carbide and ISO compatibility for cost-efficient, reliable turning in medium-to-heavy steel work. Choose the robust T9225 grade and predictable geometry to reduce tool changes and secure consistent cycle times; order directly via Metav Werkzeuge or ask their consultants for application advice. TCMT 110302 T9225 turning insert — ISO triangular insert, 60°, Tungaloy A TCMT 110302 T9225 insert for ISO‑standard turning, engineered for medium-to-heavy steel machining and compatible with standard 60° triangular holders CVD-coated cemented carbide grade T9225 ISO-compatible triangular insert 60° One-sided chipbreaker for stable roughing Cylindrical hole with countersink 40°–60° Reliable wear resistance for continuous production The CVD-coated cemented carbide substrate offers a balance of wear resistance and toughness that keeps productivity high in demanding turning operations. The T9225 grade is a robust universal grade intended for medium-to-heavy steel machining and performs well where engagement conditions vary or light interruptions occur. By resisting built-up edge and improving thermal stability, the coating contributes to longer tool life and fewer unplanned stops, which reduces overall tooling expenditure and supports steady production output. Consistent geometry for predictable component quality Precision geometry ensures repeatable results on the lathe. The triangular plate with a nominal 60° included angle and a 0.2 mm corner radius provides a compromise between edge strength and finishing capability, while the 7° clearance angle improves chip flow and reduces rubbing on the flank. The plate thickness of 3.18 mm and the 11 mm inscribed size combine with the cylindrical hole with single-sided countersink (40°–60°) to secure stable clamping and accurate seating in compatible holders. These features translate into predictable surface finish and dimensional control across batches. System compatibility and economical application planning Supplied as an ISO‑standard turning insert, the plate forms part of a system consisting of a corresponding external holder or boring bar, shim/wedge and fastening screw — compatibility depends on form, clearance, tolerance class, fastening type, size and thickness. The one-sided chipbreaker is suitable for general turning and roughing tasks, enabling effective chip control in many steel applications. Selecting the correct chipbreaker and grade reduces cycle time and tool consumption. For application matching and cutting parameter recommendations, Metav Werkzeuge can advise on holder selection and grade pairing to achieve the best balance of process security and cost-efficiency. For dependable medium-to-heavy turning with Tungaloy quality, contact Metav Werkzeuge for tailored advice and fast supply — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss application details and delivery. Technical data Article number: 6781153 Manufacturer SKU: TUN6781153 SKU: 6781153-Tungaloy Facts Included angle: 60° Corner radius: 0.2 mm Thickness: 3.18 mm Size (inscribed circle): 11 mm Clearance angle: 7° Special features Material: CVD-coated cemented carbide Grade: T9225 Shape: triangular Chipbreaker: one-sided Hole: cylindrical hole with single-sided countersink (40°–60°) Application: Turning Series: ISO turning inserts Model designation: TCMT110302 FAQ Which materials is this insert suited for? The T9225 grade insert is designed primarily for medium-to-heavy steel machining; the TCMT 110302 T9225 plate offers toughness for variable engagement and light interruptions. How does the CVD coating affect performance? CVD coating on this Tungaloy insert improves wear resistance and thermal stability, which helps the TCMT 110302 maintain edge integrity and extend service life under demanding turning conditions. What clamping systems are compatible with the insert? Compatibility depends on holder form, clearance, tolerance, fastening method, size and thickness; the ISO‑compatible triangular geometry of the TCMT110302 suits standard 60° external holders and boring bars. When is the one-sided chipbreaker recommended? The one-sided chipbreaker on this insert is recommended for stable roughing and general turning tasks where effective chip control and predictable fragmenting improve process reliability. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCMT 110302 T9225 Wendeplatten - Tungaloy
Take advantage of the combination of a CVD-coated carbide grade for toughness, a triangle 60° geometry for versatile turning, and precise dimensions for repeatable clamping; order the TCMT110302 T9225 Tungaloy insert directly via Metav Werkzeuge or ask our consultants if needed. TCMT 110302 T9225 indexable turning insert — triangular 60° form, CVD-coated carbide by Tungaloy TCMT110302 T9225 is an ISO-compliant triangular indexable insert designed for general turning, offering a robust universal grade for medium to heavy steel machining. CVD-coated carbide T9225 universal grade Triangle 60° geometry with 0.2 mm radius 3.18 mm thickness for stable clamping One-sided chipbreaker for controlled chip flow Consistent performance under variable cutting conditions The CVD-coated carbide formulation of the T9225 grade delivers a balanced combination of toughness and wear resistance, making it well suited to medium to heavy steel turning where varying engagement or light interruptions occur. The coating enhances thermal stability at elevated cutting temperatures, while the substrate provides the necessary fracture resistance. This results in fewer edge failures and longer periods between index changes, supporting a more predictable production rhythm. Secure seating and predictable cutting geometry for repeatable results A triangle 60° insert with an inscribed circle of 11 mm and a 0.2 mm corner radius provides a stable cutting edge for external and internal turning. The 7° clearance reduces rubbing and improves surface finish, while the nominal 3.18 mm thickness supports reliable clamp engagement in standard ISO holders. The insert's cylindrical hole with single-side countersink (40°–60°) facilitates accurate centring and consistent screw torque, which in turn reduces variability during tool changes and maintenance. System-level benefits: chip control, mounting and application guidance The one-sided chipbreaker and the universal nature of the T9225 grade combine to promote stable chip formation across a range of feed rates and depths of cut. In a typical system build—ISO insert, matching external holder or boring bar, backing/clamping set and replacement screws—the component contributes to a productive turning process. Selection of an appropriate chipbreaker and holder rigidity is advised for optimised tool life and surface integrity; the insert supports both roughing and finishing passes when paired with the correct setup. Contact Metav Werkzeuge for ordering or technical guidance on the Tungaloy TCMT110302 T9225 insert—email info@metav-werkzeuge.com or call +49 2822 7131930 for tailored advice and fast supply. Technical data Article number: 6951387 Manufacturer SKU: TUN6951387 Brand: Tungaloy Model series: ISO indexable turning inserts Facts Geometry angle: 60° Clearance (facing) angle: 7° Thickness: 3.18 mm Inscribed circle: 11 mm Corner radius: 0.2 mm Special features Material: carbide Coating: CVD-coated Grade: T9225 Shape: triangular Hole: cylindrical hole + single-side countersink (40°–60°) Chipbreaker: one-sided Typical application: external and internal turning System composition: ISO insert, matching external holder or boring bar, backing/clamping set, replacement screws FAQ What materials is this insert designed to machine? The TCMT110302 T9225 Tungaloy insert is formulated primarily for steel machining, with the T9225 grade providing robustness for medium to heavy steel turning operations. How does the CVD coating benefit performance? The CVD-coated surface on the T9225 grade increases thermal resistance and wear protection, which improves edge life under higher cutting temperatures and contributes to consistent component quality. Is the insert suitable for interrupted cuts? Yes, the universal T9225 grade offers increased toughness and is suitable for applications with light interruptions or variable engagement, helping to reduce edge chipping on the TCMT110302 geometry. Which chipbreaker and holder considerations are recommended? Use a matching one-sided chipbreaker and a rigid holder appropriate for the desired feed and depth of cut; a stable clamping system and the manufacturer-recommended screw torque ensure repeatable performance with this Tungaloy insert. What does the hole and countersink specification mean for mounting? The cylindrical hole with a single-side countersink (40°–60°) enables straightforward centring and secure fastening in most ISO-compatible toolholders, contributing to consistent seating and reduced setup variability. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCMT 110304 AH6225 Wendeplatten - Tungaloy
Take advantage of a proven PVD-coated carbide grade that combines a sharp, stable cutting edge with ISO compatibility for consistent turning performance; ideal for medium-duty machining of stainless steel. Order directly via Metav Werkzeuge or consult our specialists for holder compatibility and availability. TCMT 110304 AH6225 indexable turning insert for Turning — Tungaloy TCMT 110304 AH6225 is an ISO-standard turning insert designed for external and internal turning, offering a balanced mix of edge sharpness and robustness for variable shop-floor conditions. PVD-coated carbide for reliable edge life Optimised for stainless steel machining 0.4 mm corner radius for fine finishing ISO TCMT 110304 triangular 11 mm insert Consistent cutting performance for daily turning tasks The TCMT110304 AH6225 insert delivers consistent tool life through its PVD-coated carbide substrate, which resists wear while maintaining a sharp and stable cutting edge. The PVD layer reduces built-up edge and increases abrasion resistance, so the insert performs reliably across batch runs and varied feed rates. Being an ISO-standard indexable insert, it ensures predictable fitment and repeatable positioning in compatible holders, reducing setup time and variation between inserts. Practical shop-floor advantages that save time The triangular form and 11 mm size yield multiple cutting corners per insert, improving cost efficiency during production. The 0.4 mm corner radius supports finer surface finishes on medium-depth cuts without compromising edge strength, while the 7° clearance angle minimises rubbing for more stable cutting. The insert’s single-sided chipbreaker steers chip flow for controlled evacuation; this reduces rework and machine downtime, particularly when machining roving batches of stainless steel where consistent chip shape matters. Grade choice and integration for predictable results The AH6225 grade is a universal, PVD-coated carbide developed for stainless steel; it balances an initially sharp geometry with enough toughness for interrupted cuts and changing conditions. For integration, match the insert with a holder that accepts TCMT-format plates, checking form, clearance, tolerance class, fastening and thickness. For less experienced operators, select moderate cutting speeds and a stable clamping arrangement to exploit the grade’s durability and achieve the expected surface finish. For reliable results with Tungaloy’s AH6225 grade, contact Metav Werkzeuge for availability and holder compatibility — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss application-specific recommendations. Technical data Article number: 6903331 Manufacturer SKU: TUN6903331 SKU: 6903331-Tungaloy Model series: ISO-Drehwendeschneidplatten Label: TCMT110304 AH6225 Tungaloy-Wendeplatte Key measurements Insert designation: TCMT110304 Size: 11 mm Thickness: 3.18 mm Corner radius: 0.4 mm Clearance angle: 7° Included angle: 60° Manufacturer article number: 6903331 Materials and features Material: Carbide (Hartmetall) Coating: PVD Grade: AH6225 Shape: Triangular Hole: Cylindrical hole with single-side countersink (40°–60°) Chipbreaker: Single-sided Application: Turning (Drehen) Compatibility: ISO-standard insert; fits holders by form, clearance, tolerance, fastening, size and thickness FAQ What materials is this insert suited for? The TCMT110304 AH6225 insert is formulated primarily for stainless steel and performs well on a range of stainless alloys thanks to its AH6225 PVD-coated carbide grade. How does the chipbreaker affect machining? The single-sided chipbreaker on the insert shapes chips for safer evacuation and reduced re-cutting, improving process stability during turning of stainless steel. Which holders are compatible with this insert? Compatibility depends on the TCMT form, thickness (3.18 mm), hole and tolerance class; select a holder designed for ISO TCMT inserts that accommodates the cylindrical hole with countersink. What edge preparation is recommended for fine finishing? The 0.4 mm corner radius supports improved surface quality at moderate feeds; combine with stable clamping and appropriate cutting speeds to achieve better finishes. Is this insert suitable for interrupted cuts? Yes — the AH6225 grade offers a balance of sharpness and toughness that tolerates intermittent engagements under controlled conditions. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCMT 110304 AH6225 Wendeplatten - Tungaloy
TCMT110304 AH6225 combines a sharp, stable cutting edge with a universal PVD-coated carbide grade optimised for rostfreier Stahl; the triangle geometry and 0.4 mm nose radius give reliable profile accuracy while the single-sided chipbreaker improves chip control and tool life. Order the insert via Metav Werkzeuge or contact our consultants for application-specific recommendations and availability. TCMT110304 AH6225 Triangle Turning Insert — PVD-coated Carbide for Turning The TCMT110304 AH6225 is an ISO triangular turning insert designed for external and internal turning, delivering stable cutting behaviour in rostfreier Stahl under varying machining conditions. Universal PVD-coated carbide AH6225 0.4 mm nose radius for profile accuracy Triangle insert with 60° cutting angle Single-sided chipbreaker, hole with countersink Reliable cutting in rostfreier Stahl for consistent throughput The triangular indexable insert in AH6225 is a PVD-coated carbide grade developed for turning rostfreier Stahl, combining a sharp edge with damage resistance. The coating promotes temperature and wear resistance during medium cutting, which reduces unplanned downtimes and supports a predictable tool life. For production environments this translates into fewer insert changes and more consistent component quality, enhancing process stability on both roughing and light finishing passes. Geometry tuned for accurate profiles and chip control The 60° triangle geometry and a 0.4 mm corner radius deliver controlled engagement and predictable corner wear. The insert’s 7° relief angle reduces rubbing, while the single-sided chipbreaker is configured to guide swarf away from the cutting zone. These features together improve surface finish and reduce the risk of built-up edge formation, helping to achieve dimensional tolerances more reliably on shafts and bores. Grade benefits that balance economy and performance The AH6225 grade offers a balanced performance profile: a sharp cutting edge for good surface quality and a robust substrate to tolerate intermittent cutting conditions. This balance leads to lower overall cost per component in batch production since the insert sustains consistent cutting behaviour across varied feed rates and cutting depths. The universal nature of the grade simplifies tooling choices and inventory management in mixed-production shops. Simple integration into ISO-based tool systems The insert follows ISO designation TCMT110304, ensuring compatibility with standard triangle holders when form, clearance, tolerance class, clamp style, size and thickness match. The part features a 3.18 mm thickness and a central hole with a cylindrical bore and one-sided countersink (40°–60°) for secure mounting. These defined mounting features support quick index changes and secure clamping, reducing non-productive time at the machine. Application guidance for productive turning operations Select the AH6225 insert with consideration for part material, stability of the setup, and the chosen machining strategy. For unstable setups prefer lighter depths and lower feeds; for rigid clamping higher metal removal rates can be used. The combination of insert geometry and chipbreaker design supports both external turning and internal turning applications when paired with the correct holder and cutting parameters, helping to maintain surface quality and repeatability in production. Contact Metav Werkzeuge for tailored advice on applying the Tungaloy TCMT110304 AH6225 insert and to arrange prompt supply via Metav Werkzeuge’s distribution channels Technical data Article number: 6951414 SKU: 6951414-Tungaloy Manufacturer SKU: TUN6951414 Model series: ISO turning inserts Material: Carbide Grade: AH6225 Facts ISO designation: TCMT110304 Corner radius: 0.4 mm Thickness: 3.18 mm Inscribed circle / size: 11 mm Cutting angle: 60° Relief angle: 7° Special features PVD-coated carbide AH6225 Triangle insert with central hole and countersink Single-sided chipbreaker Designed for rostfreier Stahl machining Suitable for external and internal turning Compatibility requires matched holder form, clearance and clamp FAQ What material is the TCMT110304 AH6225 optimised for? The TCMT110304 AH6225 insert is optimised for machining rostfreier Stahl, combining a sharp, wear-resistant edge with a PVD-coated carbide substrate for stable performance. Which holders fit this ISO insert? Holders that accept ISO TCMT triangular inserts with matching size, form, clearance, thickness and fastening style are compatible; ensure the holder supports a 60° triangle and the 11 mm inscribed circle. How does the AH6225 grade affect tool life? AH6225 provides a balanced combination of edge sharpness and substrate toughness, which improves wear behaviour in variable cutting conditions and can extend reliable tool life compared with uncoated grades. Can the insert be used for finishing passes? Yes, the fine 0.4 mm corner radius and sharp coating make the insert suitable for light finishing passes where surface finish and profile accuracy are important. Is a special chip evacuation required? The single-sided chipbreaker helps to control swarf direction; pairing the insert with appropriate feeds and coolant or minimal quantity lubrication will support safe chip evacuation. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCMT 110304 AH6225 Wendeplatten - Tungaloy
The combination of a PVD-coated carbide grade and ISO-conformity ensures reliable cutting performance and repeatable tool changeover; select holders and chipbreakers that match the plate's form, clearance angle and thickness for consistent production. Order this insert via Metav Werkzeuge or consult their experts for application-specific recommendations. TCMT110304 AH6225 Tungaloy indexable insert for turning — PVD-coated carbide, 0.4 mm corner radius A TCMT110304 AH6225 is an ISO-format triangular indexable insert for external and internal turning, designed for reliable performance on stainless steels and variable cutting conditions. PVD-coated carbide AH6225 ISO TCMT 110304 triangular form 0.4 mm corner radius for versatility Consistent cutting in mixed stainless-steel production The PVD-coated carbide grade AH6225 provides a balanced combination of toughness and edge sharpness, making it suitable for a range of stainless-steel applications. The insert’s 0.4 mm corner radius supports controlled chip formation while limiting edge chipping during interrupted cuts, so machining remains stable across changing process conditions. As an ISO triangular insert, it offers predictable indexing and repeatable geometry when paired with a matching holder and clamping set. Clear specification simplifies holder selection and setup Key dimensions and angles are standardised, which reduces setup time and the risk of incompatible assemblies. The 7° clearance and 60° lead angle define the insert geometry for correct seating and cutting direction; the 3.18 mm thickness and 11 mm inscribed circle provide mechanical stability in the pocket. The plate features a through-hole with countersink (cylindrical hole plus one-sided countersink, 40°–60°), enabling secure fastening with standard screws and underlays while maintaining consistent clamp pressure. Practical benefits for productivity and tool life With a single-sided chipbreaker matched to the AH6225 grade, chip flow is moderated to improve surface finish and reduce rework. The PVD layer enhances wear resistance at moderate cutting speeds, supporting longer effective tool life and fewer indexings per component batch. Using the correct chipbreaker and holder combination assists in achieving repeatable cycle times and predictable part quality, which contributes directly to production efficiency and lower per-part machining costs. For precision turning tasks that demand consistent performance from Tungaloy AH6225 inserts, contact Metav Werkzeuge for availability and tailored application advice at info@metav-werkzeuge.com or call +49 2822 7131930. Technical data Article number: 6951449 SKU: 6951449-Tungaloy Manufacturer SKU: TUN6951449 Core data Inscribed circle / size: 11 mm Thickness: 3.18 mm Corner radius: 0.4 mm Clearance (relief) angle: 7° Lead / included angle: 60° ISO designation: 110304 Design and features Material: carbide Coating: PVD Grade: AH6225 Plate form: triangular Hole: with through-hole; cylindrical hole + one-sided countersink (40°–60°) Chipbreaker: single-sided Intended application: turning Model series: ISO turning indexable inserts FAQ What materials is this insert best suited for? The TCMT110304 AH6225 insert is formulated primarily for machining stainless steels, delivering a balance between edge sharpness and toughness for varied cutting conditions. How does the 0.4 mm corner radius affect performance? A 0.4 mm corner radius offers a compromise between edge strength and finish: it reduces chipping risk on interrupted cuts while still permitting fine surface quality on typical turning operations. Is the insert compatible with standard ISO TCMT holders? Yes — the ISO designation and standard thickness ensure compatibility with holders and clamping sets that match the TCMT 110304 form, provided the pocket accepts the specified thickness and hole/countersink style. What advantage does the PVD coating provide? The PVD coating increases wear resistance under moderate cutting speeds and helps maintain a stable cutting edge, which supports longer tool life and consistent part quality. Can this insert be used for internal and external turning? The geometry and chipbreaker design permit both external and internal turning applications when the correct holder and cutting parameters are selected. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCMT 110304 AH6225 Wendeplatten - Tungaloy
Benefit from a combination of a PVD-coated AH6225 carbide grade that balances a sharp and stable cutting edge and the ISO TCMT110304 format that ensures broad holder compatibility and consistent process reliability; order directly via Metav Werkzeuge or consult our specialists for selection support. TCMT110304 AH6225 Tungaloy indexable insert — ISO triangular insert for turning, PVD-coated carbide, 60° geometry TCMT110304 AH6225 Tungaloy indexable insert is an ISO-format triangular insert designed for external and internal turning in variable machining conditions. ISO triangular insert TCMT110304 PVD-coated AH6225 universal grade Suited to stainless steel turning 7° relief, 60° cutting geometry Reliable performance for stainless steel applications The TCMT110304 AH6225 insert combines a PVD-coated surface with a carbide substrate to provide a sharp yet robust cutting edge suitable for medium cutting and changing conditions. The AH6225 grade is formulated for machining stainless steels, offering improved wear resistance and stable edge life compared with uncoated grades. For production environments, this balance reduces rework and supports consistent surface finish, making the insert a practical choice where repeatability and process uptime matter. Geometry and design that simplify toolholder selection Engineered as an ISO triangular insert with a 60° cutting geometry, the turning insert features a 0.4 mm nose radius, 3.18 mm thickness and a 7° clearance angle, dimensions that are commonly supported by standard ISO toolholders. The insert is supplied with a hole and a cylindrical hole plus single-sided countersink (40°–60°) to match many clamping systems. Compatibility with a holder is determined by form, clearance, tolerance class, fastening style, size and thickness; selecting a toolholder that matches these parameters ensures secure clamping and predictable cutting behaviour. Practical machining benefits and handling guidance A one-sided chipbreaker design improves chip control when turning stainless steels under typical feeds and depths. The insert’s combination of geometry and PVD coating helps maintain a sharper edge through intermittent cutting and variable heat loads, reducing sticking and built-up edge. For best results, pair the insert with an appropriately rigid holder, choose feed and speed suited to the workpiece and cooling strategy, and select the chipbreaker and grade to match the work material. Clearances and the chosen nose radius influence surface finish and tool life—use the 0.4 mm radius for balanced finish and general-purpose cutting. Contact Metav Werkzeuge today for availability and tailored selection advice on Tungaloy AH6225 TCMT110304 indexable inserts; eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6903325 Manufacturer SKU: TUN6903325 Designation: TCMT110304 AH6225 Tungaloy indexable insert Model series: ISO turning indexable inserts Core measurements Nose radius: 0.4 mm Thickness: 3.18 mm Size: 11 Cutting angle: 60° Clearance angle: 7° Features / Applications Material: Carbide Grade/coating: AH6225, PVD-coated Chipbreaker: one-sided Hole: with hole Hole style: cylindrical hole + single-sided countersink (40°–60°) Application: external and internal turning FAQ What materials is this insert best suited for? The TCMT110304 AH6225 Tungaloy indexable insert is optimised for stainless steels, providing a balance between a sharp cutting edge and wear resistance for medium machining tasks. How does the AH6225 grade affect performance? AH6225 is a PVD-coated carbide grade designed to offer a stable cutting edge in changing conditions; the coating enhances wear resistance and reduces built-up edge during turning. Can this insert be used for internal turning operations? Yes, the ISO triangular geometry and available chipbreaker make the insert suitable for both external and internal turning, provided the holder and overhang are appropriate for the application. What holder features are needed for correct compatibility? Holder compatibility is determined by shape, clearance angle, tolerance class, fastening method, size and thickness; matching these parameters to the insert’s ISO format ensures secure clamping and reliable cutting. Which nose radius and cutting conditions are recommended? The 0.4 mm nose radius is suitable for general-purpose turning where a balance of surface finish and cutting strength is required; adjust feed and speed according to stainless steel grade and rigidity of the setup. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCMT 110304 AH6235 Wendeplatten - Tungaloy
Take advantage of the combination of reliable chip control, robust PVD-coated carbide and ISO compatibility for consistent turning performance; order the insert directly via Metav Werkzeuge or consult our technical advisors for application matching. TCMT 110304 AH6235 Turning insert by Tungaloy — PVD-coated carbide, 60° geometry The TCMT110304 AH6235 is an ISO triangular indexable insert designed for external and internal turning, optimised for stainless steels and interrupted cuts. ISO triangular insert, 60° geometry PVD-coated AH6235 for stainless steel 0.4 mm corner radius for precise profiling One-sided chipbreaker for controlled chips Improved process reliability for stainless steel turning The PVD-coated AH6235 grade delivers a tougher cutting edge that reduces chipping during interrupted cuts and unstable setups. With a 60° insert geometry and a 0.4 mm corner radius, the cutting edge produces consistent engagement and predictable tool life, which supports steady cycle times and fewer unexpected stoppages. The PVD layer enhances wear resistance and heat tolerance, meaning longer periods between indexings and reduced tool change labour — a clear efficiency gain in high-mix turning operations. Practical compatibility and mounting advantages This ISO-design insert conforms to standard holder interfaces; compatibility depends on insert shape, clearance angle, tolerance class, fixing method, size and thickness. The insert thickness of 3.18 mm and triangular form suit many common external holders and boring bars, while the central hole with a cylindrical bore and single-side countersink (40°–60°) ensures secure clamping. Specifying holders that match the insert form and tolerance reduces vibration and improves surface finish, so machining set-up becomes faster and more repeatable for production batches. Chip control and surface quality for demanding components Equipped with a one-sided chipbreaker, the insert promotes effective chip formation when machining ductile and work-hardened stainless steels. The tougher grade and optimised chipformer reduce the risk of built-up edge and edge fracture, which helps to maintain dimensional accuracy and a consistent surface finish. For shops aiming to balance productivity with part quality, this indexable solution delivers improved process stability and fewer reworks, especially on interrupted or unstable cuts where conventional grades would fail sooner. For application advice and to ensure the correct insert and holder pairing for a specific turning task, contact Metav Werkzeuge: info@metav-werkzeuge.com or call +49 2822 7131930 — our consultants provide fast, practical support and order handling. Technical data Article number: 6903499 Manufacturer SKU: TUN6903499 SKU: 6903499-Tungaloy Model series: ISO turning indexable inserts Designation: TCMT110304 AH6235 Material: carbide Grade/coating: AH6235 (PVD-coated) Facts Corner radius: 0.4 mm Included angle: 60° Clearance angle: 7° Thickness: 3.18 mm Size: 11 mm Hole: with hole; cylindrical bore + single-sided countersink (40°–60°) Special features One-sided chipbreaker Suitable for stainless steels and interrupted cuts ISO-standard triangular insert form Robust edge for reduced chipping Compatible with standard external holders and boring bars FAQ What materials is this insert suited for? The AH6235 grade is formulated for machining stainless steel, and the TCMT110304 insert is particularly effective in interrupted cuts and situations with increased risk of edge breakout. How does the PVD coating affect tool life? The PVD-coated surface on this carbide grade improves wear resistance and heat tolerance, extending the effective life of the insert under typical turning conditions. Which holder types fit this insert? Compatibility depends on holder form, clearance angle, tolerance class, fixing method, size and thickness; the insert is intended for standard ISO triangular turning holders and compatible boring bars. Can the insert be used for finishing as well as roughing? The insert’s tougher grade and controlled chipbreaking make it suitable for a balance of roughing and semi-finishing; achieving fine finishes may require optimised cutting parameters and stable clamping. What is the part number for ordering? Order using article number 6903499 or manufacturer SKU TUN6903499 for the TCMT110304 AH6235 Tungaloy turning insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCMT 110304 AH6235 Wendeplatten - Tungaloy
Take advantage of the combination of PVD-coated carbide and stable chip control for reliable turning of stainless materials; the robust grade AH6235 reduces edge breakage in interrupted cuts while compatibility with ISO holders keeps set-up simple. Order directly via Metav Werkzeuge or consult the team for machining recommendations. TCMT 110304 AH6235 Turning Insert by Tungaloy — PVD-coated carbide for stainless steel The TCMT110304 AH6235 is an ISO-standard triangular indexable insert for turning, designed for external and internal operations where improved fracture resistance and chip control are required. PVD-coated carbide grade AH6235 Optimised for stainless steel and interrupted cuts ISO TCMT 110304 triangular insert, 11 mm Cylindrical hole with 40°–60° countersink Consistent cutting performance for productive turning The insert delivers predictable chip control and a durable cutting edge thanks to the PVD-coated carbide composition. For production environments where cycle times and part quality matter, the tougher AH6235 grade provides a stable cutting edge that lowers the risk of unexpected edge chipping during interrupted cuts. This translates into fewer machine stops for insert changes and a more continuous production flow, supporting higher overall equipment effectiveness without compromising surface finish. Designed to handle stainless steel and challenging cuts The microstructure and coating of this grade have been selected for machining stainless steel, where workpiece strain hardening and built-up edge are common problems. The single-sided chipbreaker aids in forming short, manageable chips and reduces heat concentration at the cutting edge, which is particularly beneficial when machining interrupted profiles or when chip evacuation is restricted. For operators unfamiliar with grade choices, this insert provides a pragmatic balance of toughness and wear resistance for demanding turning tasks. ISO compatibility and straightforward clamping reduce set-up time The insert’s ISO designation and triangular 11 mm form make it compatible with a wide range of standard holders and toolposts. The cylindrical hole with single-side countersink (40°–60°) ensures reliable seating and repeatable positioning when combined with the appropriate clamping set and screws. With a 0.4 mm corner radius and 7° clearance angle, the component supports fine adjustments between roughing and finishing operations. Using standardised inserts simplifies tooling logistics and makes tool changeovers faster and less error-prone, which benefits both small job shops and larger production cells. Practical benefits for workshop efficiency Adopting this insert supports a pragmatic machining strategy: fewer tool changes, improved process stability and consistent surface quality. The PVD coating extends edge life under elevated temperatures, while the tough substrate tolerates shock loads better than more brittle grades. Together, these characteristics help to reduce tooling consumption and maintain part tolerances over longer runs, aiding cost control and predictable scheduling in daily operations. Contact Metav Werkzeuge for tailored application advice and to obtain genuine Tungaloy inserts; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6903489 SKU: 6903489-Tungaloy Manufacturer SKU: TUN6903489 Model series: ISO-Drehwendeschneidplatten Material: Carbide Facts ISO designation: TCMT110304 Size: 11 mm Thickness: 3.18 mm Corner radius: 0.4 mm Clearance angle: 7° Included angle: 60° Hole: with hole Hole style: cylindrical hole + single-side countersink (40°–60°) Special features Grade/coating: AH6235, PVD-coated carbide Recommended application: Turning; external and internal turning Chipbreaker: single-sided Plate shape: triangular Compatibility: ISO-standard insert for standard holders and clamping sets Typical system: insert + external holder or boring bar + clamp/underlay + replacement screws FAQ What materials is this insert best suited for? The AH6235 PVD-coated carbide grade is optimised for machining stainless steel and performs well under interrupted cutting conditions; the TCMT110304 geometry supports a variety of stainless grades. Can the insert be used for internal as well as external turning? Yes, the ISO TCMT110304 triangular form is suitable for both external and internal turning when paired with the appropriate holder or boring bar. How does the chipbreaker affect performance? The single-sided chipbreaker helps produce short, controllable chips and reduces the likelihood of long, tangled chips, improving process stability and component surface quality. What seating and clamping features ensure repeatability? The insert uses a cylindrical hole with a single-side countersink (40°–60°) to guarantee reliable seating and repeatable positioning with standard clamping sets and screws. Is this an original Tungaloy product and how is it identified? Yes — the item is listed as a genuine Tungaloy turning insert with article number 6903489 and manufacturer SKU TUN6903489; the AH6235 grade and ISO TCMT110304 designation identify the specific product. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCMT 110304 AH725 Wendeplatten - Tungaloy
Take advantage of the combination of reliable process security, a PVD-coated carbide grade and precise ISO geometry for consistent turning results; order through Metav Werkzeuge or consult our technical team for tailored recommendations. TCMT 110304 AH725 turning insert — Tungaloy A TCMT110304 AH725 indexable turning insert designed for external and internal turning with 60° cutting geometry and a universal, breakage-resistant grade. PVD-coated AH725 grade for broad workpiece range ISO triangle form TCMT 110304, 60° cutting angle 0.4 mm corner radius with 3.18 mm thickness Cylindrical hole with single-sided countersink High productivity through consistent cutting performance The combination of a PVD-coated surface and the AH725 carbide grade gives a balanced mix of wear resistance and toughness that promotes stable chip formation when machining a variety of steels and rostfreier Stahl. This results in fewer unplanned tool changes and a more predictable cycle time. The coated substrate supports elevated cutting parameters where appropriate, translating into improved throughput without sacrificing component quality. Designed geometry for secure clamping and repeatable accuracy The ISO-conforming triangular shape with a 60° point and an 11 mm inscribed circle ensures compatibility with standard TCMT holders and simplifies tool management across multiple machines. The cylindrical hole with a one-sided countersink (40°–60°) provides reliable seating and torque transmission in common clamping systems, reducing the risk of insert movement under load and helping to maintain consistent tolerances across production runs. Small radius, big effect on surface finish and edge stability A 0.4 mm corner radius combined with a single-sided chipbreaker is particularly useful for finishing and semi-finishing passes where edge strength and surface quality matter. The modest radius offers a compromise between edge resilience and the ability to produce fine surface finishes. With a 3.18 mm plate thickness, the insert delivers the mechanical support required for steady cutting, especially when turning smaller diameters or when higher rigidity is demanded. Grade and coating explained for practical selection The AH725 grade is a universal, fracture-resistant option developed for mixed production environments and smaller tools where process security is a priority. The PVD-coated top layer increases abrasion resistance and reduces built-up edge formation, while the carbide substrate provides toughness against shock and interrupted cuts. For users less familiar with coating technology: PVD creates a thin, adherent protective layer that extends tool life without markedly increasing cutting-edge brittleness. For secure and productive turning with Tungaloy AH725 inserts, contact Metav Werkzeuge for availability and application advice via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6864926 SKU: 6864926-Tungaloy Manufacturer SKU: TUN6864926 Name: TCMT110304 AH725 Tungaloy insert Facts Insert designation: TCMT110304 Grade: AH725 Material: carbide Cutting angle: 60° Inscribed circle: 11 mm Corner radius: 0.4 mm Thickness: 3.18 mm Clearance angle: 7° Hole: with hole, cylindrical + single-sided countersink (40°–60°) Special features PVD-coated carbide grade AH725 Triangle plate form, ISO-conforming Single-sided chipbreaker Universal, breakage-resistant for steel and rostfreier Stahl Suitable for external and internal turning applications Compatible with standard TCMT holders, clamp sets and replacement screws FAQ What materials is this insert suited for? The TCMT110304 AH725 insert is specified for a broad range of steels and rostfreier Stahl, offering a good compromise between wear resistance and toughness for mixed production runs. Which holders are compatible with this insert? Compatibility depends on form, relief angle, tolerance class, fastening and size; the TCMT110304 follows ISO dimensions and fits holders designed for TCMT triangular inserts with an 11 mm inscribed circle. How does the AH725 grade perform compared with other PVD grades? AH725 is designed as a universal, fracture‑resistant PVD-coated carbide grade that favours process security, especially in applications with varying workpiece materials or smaller tool geometries. Is the insert suitable for finishing operations? Yes, the 0.4 mm corner radius and single-sided chipbreaker make this insert suitable for finishing and semi-finishing where surface quality and edge stability are important. What should be considered when replacing inserts in an existing toolset? Ensure that the holder accepts a TCMT 110304 form, the seating and countersink dimensions match, and that clamping hardware provides the required rigidity; use the specified screws and underlay or clamp set for safe operation. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCMT 110304 AH725 Wendeplatten - Tungaloy
Take advantage of the combination of PVD-coated carbide AH725, ISO compatibility and robust chip control for reliable turning performance and reduced downtime. Order the TCMT110304 AH725 turning insert directly via Metav Werkzeuge or ask our consultants for application advice. TCMT 110304 AH725 turning insert by Tungaloy — PVD-coated carbide, triangular ISO geometry The TCMT110304 AH725 is an ISO‑standard triangular turning insert designed for external and internal turning operations, offering a universal, fracture‑resistant grade suited to mixed‑material production. PVD-coated carbide AH725 for Stahl and rostfreier Stahl ISO TCMT110304 triangular geometry for turning Single-sided chipbreaker for consistent chip control Cylindrical hole with 40°–60° countersink High process reliability from a universal PVD‑coated grade The AH725 grade combines a PVD-coated carbide substrate with an optimised microstructure to deliver consistent edge stability and prolonged tool life in batch‑changing environments. For operations that require both precision and repeatability, this insert’s universal character reduces the need for frequent grade changes while maintaining surface quality and dimensional consistency. The result is fewer tool changes, lower process variability and improved throughput on both conventional and CNC lathes. Designed for turning diverse materials with controlled chip formation Specified for turning (Drehen), the insert is suitable for machining Stahl and rostfreier Stahl, where reliable chip control is critical. The single-sided chipbreaker promotes predictable chip breaking and evacuation, which reduces clogging in deep cuts and long‑run production. The PVD coating enhances wear resistance and reduces built‑up edge formation at moderate to high cutting speeds, improving finish and extending service intervals for stable, productive machining. Geometry and dimensions that support repeatable accuracy The triangular geometry and ISO designation ensure broad holder compatibility when matching form, relief angle, tolerance class, clamping and thickness. Key geometry values include a 0.4 mm nose radius and a 3.18 mm plate thickness, together supporting a balance between strength and surface finish. The insert features a 7° relief angle and a 60° included angle, while the central cylindrical hole with one‑sided countersink (40°–60°) secures repeatable clamping and minimises micro‑movement under load, contributing to consistent part quality. Practical productivity benefits and recommended use By choosing a fracture‑resistant, universal grade such as AH725, shops achieve stable chip formation across varying workpiece alloys and smaller tool geometries, improving process security under fluctuating conditions. The insert integrates into standard ISO systems with a clear path to optimised cutting data: select the chipbreaker and grade to match the workpiece and intended feed/ depth values, and pair with an appropriate clamping pad and screw set to maintain repeatable tool positioning. For short‑setup, high‑mix environments this approach reduces setup time and scrap rates while supporting sustained productivity. For secure supply and tailored application support with Tungaloy AH725 inserts, contact Metav Werkzeuge for purchasing and consultation at info@metav-werkzeuge.com or call +49 2822 7131930 — prompt delivery and technical advice available. Technical data Article number: 6864921-Tungaloy Manufacturer SKU: TUN6864921 Manufacturer article number: 6864921 Brand: Tungaloy Model series: ISO-Drehwendeschneidplatten Designation: TCMT110304 Facts Nose radius: 0.4 mm Plate thickness: 3.18 mm Inscribed circle / size: 11 mm Relief angle: 7° Included angle: 60° Special features Grade: AH725 Coating: PVD Material: Hartmetall Chipbreaker: single-sided Hole: cylindrical hole + one-sided countersink (40°–60°) Geometry: triangular Application: Drehen Compatibility: ISO-standard insert; holder compatibility depends on form, relief angle, tolerance class, clamping, size and thickness FAQ What materials is this insert suitable for? The TCMT110304 AH725 insert is designed primarily for machining Stahl and rostfreier Stahl, offering universal performance for mixed‑material production. How does the AH725 grade affect tool life? AH725’s PVD‑coated carbide composition provides improved wear resistance and stable edge strength, which typically results in longer tool life and fewer unplanned tool changes. Can this insert be used for internal and external turning? Yes — the ISO triangular geometry and chipbreaker make the insert suitable for both external and internal turning tasks when matched with the correct holder and cutting data. What clamping features does the insert have? The insert includes a cylindrical centre hole with a one‑sided countersink (40°–60°) to ensure secure and repeatable clamping in compatible ISO holders. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCMT 110304 AH8015 Wendeplatten - Tungaloy
High wear resistance from the AH8015 grade and a PVD‑coated carbide substrate deliver durable edge stability for turning heat‑resistant alloys; the 60° triangle geometry and 0.4 mm corner radius support fine surface finish and consistent cycle times. Order the insert directly via Metav Werkzeuge or contact our consultants for setup and cutting‑data optimisation. TCMT 110304 AH8015 turning insert — triangle, 60° geometry — Tungaloy The TCMT110304 AH8015 is an ISO‑standard triangular indexable insert designed for external and internal turning of heat‑resistant alloys and general turning applications. PVD‑coated carbide grade AH8015 Triangle insert with 60° cutting angle 0.4 mm corner radius for fine finishing Cylindrical hole with single‑sided countersink Durable coating and grade balance for extended tool life The combination of a PVD coating with the AH8015 cemented carbide substrate provides a balanced solution between wear resistance and cutting‑edge stability. This balance reduces flank wear and microchipping when machining heat‑resistant alloys, which results in prolonged tool life and fewer insert changes per production shift. The coating also lowers built‑up edge tendency, improving repeatable part quality under thermal loads. ISO compatibility and reliable clamping for immediate integration As an ISO‑standard insert, compatibility depends on form, clearance angle, tolerance class, fixation method, size and thickness; the triangular shape with a 7° clearance and 3.18 mm thickness ensures straightforward replacement in standard holders. The insert’s cylindrical hole with a single‑sided countersink (40°–60°) supports secure clamping and concentric position in the pocket, reducing vibration and enabling stable cutting conditions even on longer overhangs. Predictable chip control and surface finish for efficient cycles The single‑sided chipbreaker geometry and 60° cutting angle are optimised for controlled chip formation in turning operations, lowering cycle interruptions and improving swarf evacuation. The 0.4 mm corner radius helps achieve a fine surface finish while maintaining strength at the cutting edge, which is especially beneficial for finishing passes or when tighter tolerances are required. Overall, this geometry contributes to higher process reliability and consistent component quality. For reliable machining of heat‑resistant alloys, request the Tungaloy TCMT110304 AH8015 turning inserts and tailored cutting data from Metav Werkzeuge — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6951415 SKU: 6951415-Tungaloy Manufacturer SKU: TUN6951415 Brand: Tungaloy Material: carbide Model series: ISO turning indexable inserts Designation: TCMT110304 Core data Thickness: 3.18 mm Inscribed circle / size: 11 mm Corner radius: 0.4 mm Clearance angle: 7° Cutting angle: 60° Special features ISO‑standard triangular indexable insert PVD‑coated carbide, grade AH8015 Single‑sided chipbreaker Cylindrical hole with single‑sided countersink (40°–60°) Triangular plate form, with hole Intended application: turning; suitable for heat‑resistant alloys FAQ What materials is this insert suited for? The TCMT110304 AH8015 insert from Tungaloy is specified as a first choice for general machining of heat‑resistant alloys, offering a balanced combination of wear resistance and edge stability. How does the PVD coating affect performance? The PVD coating on the Tungaloy insert reduces adhesion and improves wear resistance under high temperatures, which helps maintain cutting edge integrity and extends effective tool life. Which geometry features influence surface finish? The 60° triangle geometry combined with a 0.4 mm corner radius provides improved surface finish and reliable strength at the cutting edge for finishing passes with consistent part quality. How should the insert be mounted in a holder? Compatibility is determined by form, clearance angle, tolerance class, fixation, size and thickness; the insert’s 7° clearance and 3.18 mm thickness match standard ISO pockets and its cylindrical hole with countersink secures accurate clamping. What chip control can be expected in turning? The single‑sided chipbreaker on this grade delivers predictable chip formation and evacuation during turning, reducing interrupts and improving machining efficiency. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
TCMT 110304 AH8015 Wendeplatten - Tungaloy
Take advantage of the combination of PVD-coated cemented carbide and precise ISO geometry for dependable turning, reduced tool changes and consistent surface quality. Order genuine Tungaloy inserts via Metav Werkzeuge or request expert advice for quick integration into existing tool systems. TCMT 110304 AH8015 indexable turning insert (turning) — PVD-coated cemented carbide, 0.4 mm corner radius — Tungaloy A TCMT110304 AH8015 indexable insert engineered for general turning of heat-resistant alloys, offering a balanced mix of wear resistance and cutting-edge stability for productive metalcutting operations PVD-coated cemented carbide AH8015 ISO-standard triangular 60° form 0.4 mm corner radius for fine finishing Cylindrical hole with single-sided countersink Higher production throughput with balanced cutting performance The PVD-coated cemented carbide grade AH8015 combines wear resistance and edge stability to extend tool life under elevated temperatures. For machining heat-resistant alloys, this composition enables longer uninterrupted runs and consistent geometry of the cutting edge, which translates directly into fewer indexings and lower per-part tooling cost. The PVD-coated surface improves resistance to built-up edge and thermal softening, supporting higher cutting speeds where the process allows. Reliable seating and repeatable clamping for precision turning Built to ISO standards, the triangular insert with a 60° included angle ensures compatibility with common external holders; compatibility is determined by the insert form, relief angle, tolerance class, clamping and thickness. The cylindrical hole with single-sided countersink gives secure seating and repeatable axial positioning when paired with the correct clamping kit, reducing vibration and improving repeatability. The modest 7° relief angle and 3.18 mm thickness balance strength and accessibility for a broad range of turning tasks. Practical geometry and chip control for cleaner finishes A 0.4 mm corner radius supports fine finishing and controlled material flow on interrupted or continuous cuts. The one-sided chipbreaker is optimised for general turning; selecting the proper chipbreaker and grade against the workpiece material and machine stability is key to achieving low cutting forces and effective chip evacuation. The system approach — insert plus suitable external holder, shim and screws — simplifies maintenance and spare-part management, shortening downtime during indexings or replacements. The insert designation appears as TCMT110304, making identification in tool lists straightforward. Contact Metav Werkzeuge for application advice or to order genuine Tungaloy inserts — quote SKU TUN6951452 or article number 6951452 for fast processing; eMail: info@metav-werkzeuge.com • Tel: +49 2822 7131930 Technical data Article number: 6951452 Manufacturer SKU: TUN6951452 Vendor SKU: 6951452-Tungaloy Model series: ISO turning indexable inserts Designation: TCMT110304 Grade/coating: AH8015 Material: Cemented carbide Dimensions & key values Size: 11 mm Thickness: 3.18 mm Corner radius: 0.4 mm Relief angle: 7° Included angle: 60° Hole: with hole (cylindrical hole + single-sided countersink 40°–60°) Features & applications Shape: triangular Chipbreaker: one-sided Application: turning Suitable for: heat-resistant alloys Coating type: PVD-coated cemented carbide Compatibility: ISO insert — check holder form and clamping FAQ What materials is this insert suited for? The TCMT110304 AH8015 insert from Tungaloy is formulated for the general machining of heat-resistant alloys, offering a balance between wear resistance and edge stability for turning applications. How is the insert secured in a holder? The insert uses a cylindrical centre hole with a single-sided countersink (40°–60°) and is designed for ISO-compatible clamping systems; correct seating with the appropriate shim and clamping screws ensures repeatable positioning. What does the 0.4 mm corner radius mean for finish? A 0.4 mm corner radius gives a finer surface finish potential and reduced cutting forces in finishing passes, while still providing sufficient edge strength for general turning operations. Which grade and coating are applied to the insert? The item is supplied in AH8015, a PVD-coated cemented carbide grade optimised for a wide range of turning tasks, particularly on heat-resistant materials. Which SKU or article number should be quoted when ordering? Quote SKU TUN6951452 or article number 6951452 to ensure the correct Tungaloy TCMT110304 AH8015 insert is delivered. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCMT 110304 AH8015 Wendeplatten - Tungaloy
The combination of a PVD‑coated AH8015 carbides grade and precise TCMT110304 geometry delivers a reliable balance of wear resistance and edge stability for turning heat‑resistant alloys — order directly via Metav Werkzeuge or consult our specialists for application advice. TCMT 110304 AH8015 turning indexable insert — triangular ISO insert for general turning, Tungaloy TCMT110304 AH8015 Tungaloy turning insert offers robust performance for external and internal turning of heat‑resistant alloys, combining a balanced grade with ISO‑standard geometry for predictable productivity PVD‑coated AH8015 carbide grade Optimised for heat‑resistant alloys Triangular ISO TCMT form, 60° included angle 0.4 mm corner radius for versatile turning Reliable grade engineered for demanding alloys The PVD‑coated AH8015 carbide delivers a controlled trade‑off between wear resistance and cutting‑edge stability, making it particularly suitable for the general machining of high‑temperature alloys. The coating reduces adhesion and improves edge life under thermal stress, which supports longer tool cycles and fewer interruptions. This results in consistent component quality and helps maintain throughput in production environments where alloy heat resistance challenges standard grades. Geometry that ensures stable cutting and repeatable results The TCMT110304 triangular insert features a 60° included angle, 0.4 mm corner radius, and a 3.18 mm thickness, providing a stable platform for finishing and light‑to‑medium turning operations. The 7° relief angle reduces contact on the flank while preserving the effective cutting edge, which helps to lower cutting forces and vibration risk. The standardised triangular insert form simplifies holder selection and indexing, enabling straightforward replacement and repeatable part tolerances. System compatibility and practical handling in the workshop As an ISO‑standard insert with a centre hole and countersink, the insert is compatible with a wide range of clamping systems; the hole with countersink (40°–60°) ensures secure fastening and correct seating in indexable holders. The product’s single‑sided chipbreaker arrangement supports predictable chip formation when matched to material and cutting parameters, and the insert integrates into ISO turning systems alongside appropriate holders, clamp sets and fasteners. For process planning, the combination of geometry and PVD surface treatment helps to reduce unexpected tool changes and supports stable cycle times. Contact Metav Werkzeuge for tailored cutting data and holder compatibility checks for this Tungaloy turning insert; phone +49 2822 7131930 or email info@metav-werkzeuge.com for direct technical consultation and ordering assistance Technical data Article number: 6947707 Manufacturer SKU: TUN6947707 SKU: 6947707-Tungaloy Model series: ISO turning indexable inserts Material: carbide Data Insert designation: TCMT110304 Grade: AH8015 Thickness: 3.18 mm Size: 11 mm Corner radius: 0.4 mm Relief angle: 7° Included angle: 60° Special features Coating: PVD‑coated carbide Shape: triangular insert Hole: with hole — cylindrical hole + single‑side countersink (40°–60°) Chipbreaker: one‑sided Application: turning FAQ What materials is this insert best suited for? The TCMT110304 AH8015 insert is specified for the general machining of heat‑resistant alloys; the AH8015 grade and PVD finish combine to offer balanced wear resistance and cutting‑edge stability for such materials. Is the insert compatible with standard ISO TCMT holders? Yes; the insert follows ISO geometry and the triangular form, thickness and hole/countersink configuration are compatible with ISO TCMT holders that match the size and tolerance class. How does the 0.4 mm corner radius affect part finish? A 0.4 mm corner radius provides improved edge strength over smaller radii while still supporting good surface finish in finishing and semi‑finishing operations when machining with appropriate feeds and speeds. Can this insert be indexed in situ to use fresh edges? The triangular ISO shape allows indexing to fresh cutting edges; secure clamping via the cylindrical hole and countersink is required to ensure repeatable seating and the expected performance. What role does the chipbreaker play for turning operations? The one‑sided chipbreaker promotes consistent chip control when matched to the right feed and depth of cut; pairing the chipbreaker design with the material and grade supports safe chip evacuation and process stability. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCMT 110304 DX120 Wendeplatten - Tungaloy
Take advantage of the combination of high cutting-speed performance, long service life and precise ISO compatibility to maximise throughput in aluminium and non‑ferrous turning operations. Order the insert directly via Metav Werkzeuge or consult our specialists for selection and delivery. TCMT110304 DX120 Tungaloy turning insert (TCMT, PCD, 60°) A TCMT110304 DX120 turning insert designed for high‑speed machining of aluminium and non‑ferrous materials, supplied in ISO triangular format for external and internal turning PCD grade DX120 for aluminium and non‑ferrous metals ISO triangle 60° form for versatile turning Very long tool life at high cutting speeds Single‑sided chipbreaker with centred hole High‑speed performance and measurable productivity gains The triangular insert combines a polished PCD cutting layer with a stable substrate to deliver consistently higher material removal rates in non‑ferrous work. The DX120 grade is engineered for aluminium and similar alloys, enabling elevated spindle speeds while maintaining surface quality and tool integrity. Thanks to the diamond cutting edge, the insert offers reduced flank wear and extended intervals between index changes, which translates directly into lower machining downtime and improved process efficiency. The geometry supports reliable chip evacuation when paired with the appropriate holder and coolant strategy. Simple holder compatibility and installation clarity Compatibility is defined by the insert form, clearance angle, tolerance class, fixing method, size and thickness; this ISO‑compliant design ensures straightforward matching with standard triangular holders. The 60° insert angle and the 7° clearance angle allow secure seating in many external and internal turning tool bodies, while the cylindrical hole with one‑side countersink (40°–60°) provides repeatable clamping and orientation. Clear specification of these parameters reduces set‑up time on the shop floor and avoids ambiguous tool selection, supporting leaner changeover and consistent run quality. Durable edge technology for predictable tooling costs The PCD cutting layer in combination with a robust substrate delivers a marked increase in lifetime for abrasive or adhesive aluminium alloys and non‑metallic abrasive composites. This durability yields a clear cost‑per‑part advantage: fewer index changes, less tool handling and reduced consumption of spare inserts. The single‑sided chipbreaker is optimised for controlled chip formation under typical turning feeds, reducing the risk of surface rework and improving first‑pass yields. For production environments where uptime and consistency matter, this insert helps to stabilise process performance. Application guidance and practical selection advice Select the chipbreaker and grade according to workpiece material, machining strategy and machine stability. For light finishing passes at high surface‑finish demands, favour lower feeds with the same DX120 grade to exploit the PCD edge’s fine cutting capability. For roughing or interrupted cuts, ensure clamping rigidity and appropriate tool overhang are in place to preserve edge life. The system comprises the ISO insert, a matching external holder or boring bar, backing/clamping kit and replacement screws — providing a complete, repeatable tooling solution when sourced and assembled correctly. For availability and tailored tooling advice on the Tungaloy DX120 PCD insert (SKU 6822168‑Tungaloy), contact Metav Werkzeuge via email info@metav-werkzeuge.com or by phone +49 2822 7131930 for rapid consultation and order placement. Technical data Article number: 6822168 Manufacturer SKU: TUN6822168 SKU: 6822168-Tungaloy Model series: ISO-Drehwendeschneidplatten Designation: TCMT110304 DX120 Tungaloy-Wendeplatte Core dimensions Plate designation: TCMT110304 ISO code: 110304 Plate size: 11 mm Thickness: 3.18 mm Included angle: 60° Clearance angle: 7° Corner radius: 0.4 mm Design and features Cutting material: polykristalliner Diamant (PCD) Grade: DX120 Plate shape: triangular Chipbreaker: single‑sided Hole: with cylindrical hole + one‑side countersink (40°–60°) Typical application: external and internal turning FAQ Which materials are best suited for this insert? The TCMT110304 DX120 insert uses a PCD cutting layer optimised for aluminium, other non‑ferrous metals and abrasive non‑metallic materials, delivering high cutting speeds and long tool life. Is this an ISO‑standard insert and will it fit common holders? Yes — the insert follows ISO triangular specifications (110304) and, with a 60° included angle and standard dimensions, is compatible with matching ISO triangular turning holders when clamped according to size and tolerance requirements. What benefit does the single‑sided chipbreaker provide? The single‑sided chipbreaker on the TCMT110304 promotes controlled chip formation in turning operations, improving surface finish and reducing the likelihood of rework for many aluminium machining applications. How does the DX120 grade affect tooling costs? The DX120 PCD grade extends index intervals and reduces insert consumption through superior wear resistance, which lowers the overall cost per part in high‑speed aluminium production. What are the relevant product identifiers for ordering? Order using SKU 6822168‑Tungaloy or the manufacturer article number 6822168; the insert is the TCMT110304 DX120 Tungaloy turning insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
TCMT 110304 NS9530 Wendeplatten - Tungaloy
Take advantage of the combination of a sharp, uncoated cermet cutting edge and ISO compatibility for consistent finishing results and reduced rework; order the insert directly via Metav Werkzeuge or consult the technical team for application-specific guidance. TCMT 110304 NS9530 Tungaloy turning insert — uncoated cermet, finishing grade TCMT 110304 NS9530 is a triangular indexable insert for turning, optimised for finishing steel with low cutting forces and superior surface quality. Uncoated cermet grade NS9530 Sharp edge for fine finishing ISO indexable insert, 60° geometry Cylindrical hole with countersink Optimised finishing performance for steels with minimal cutting forces The uncoated cermet grade NS9530 delivers a consistently sharp cutting edge that reduces rubbing and heat generation during light passes. Designed as a finishing grade, this insert is particularly effective for continuous cuts and small depths of cut, producing a high surface finish while keeping low cutting forces. Such characteristics improve cycle-time predictability and reduce the need for secondary operations, supporting a lean production flow for machined steel components. Reliable fit and stable clamping for repeatable accuracy As an ISO indexable insert, the triangular geometry with a 60° included angle ensures mechanical stability in the pocket and predictable contact lines with the holder. The insert’s 0.4 mm corner radius and 3.18 mm plate thickness contribute to consistent engagement and rigidity during finishing passes. The central cylindrical hole with a single‑side countersink (40°–60°) maintains secure, repeatable clamping and simplifies regripping, which reduces setup variability in serial production and supports tighter tolerances. Process advantages that increase productivity and reduce scrap Selecting this finishing grade means fewer surface defects and more consistent part quality from the first pass. The combination of a sharp edge and tailored chip control for finishing operations lowers the risk of built-up edge and minimises vibration at low chip loads, resulting in fewer rejects and less rework. These process benefits translate into measurable productivity gains on batch runs where surface integrity and dimensional consistency are priorities. System approach: match insert, chipbreaker and holder for best results The insert functions as part of a system consisting of a matching external holder or boring bar, a shim/clamp set and the correct fastening screw. The single‑sided chipbreaker must be chosen according to the workpiece material and the intended cutting regime to exploit the grade’s finishing potential. This insert is suited to external and internal turning when paired with a compatible ISO holder and appropriate cutting data, enabling predictable machining performance across a range of steel grades. Contact Metav Werkzeuge for an application consultation on the Tungaloy finishing insert TCMT 110304 NS9530 and request cutting-data recommendations via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6945272-Tungaloy Manufacturer SKU: TUN6945272 Manufacturer item no.: 6945272 Brand: Tungaloy Type designation: TCMT110304 Core data Insert form / geometry: triangular, 60° Inscribed circle / size: 11 mm Corner radius: 0.4 mm Plate thickness: 3.18 mm Clearance angle: 7° Design & features Material: carbide Grade: uncoated cermet NS9530 Chipbreaker: single-sided Hole: cylindrical hole with single-sided countersink (40°–60°) Application: turning (external and internal) ISO series: ISO turning indexable inserts FAQ What applications is this insert best suited for? The TCMT 110304 NS9530 Tungaloy insert is intended for finishing operations on steel, especially continuous cuts and small depths of cut where a fine surface finish is required. Can this insert be used for roughing operations? This grade and geometry are optimised for finishing; for heavy roughing, a more robust grade and chipbreaker should be selected instead of the TCMT 110304 NS9530. Which holders are compatible with this insert? Compatibility depends on holder form, clearance angle, tolerance class, fastening method, size and thickness; the insert fits ISO‑format turning holders designed for TCMT style inserts. How does the uncoated cermet grade affect tool life? The uncoated cermet NS9530 provides a very sharp edge and excellent surface quality in finishing cuts; tool life will depend on cutting data, material and stability of the setup when using the TCMT 110304 NS9530. Is the insert supplied with clamping hardware? The TCMT 110304 NS9530 insert is supplied alone; the machining system comprises a matching external holder or boring bar, shim/clamp set and fastening screws that must be provided separately. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCMT 110304 NS9530 Wendeplatten - Tungaloy
A reliable product description cannot be generated due to inconsistent material information in the source data. One entry indicates cemented carbide while another specifies an uncoated cermet; these are distinct tool materials with different machining characteristics, cutting parameters and application recommendations. Accurate material specification is essential for correct terminology, the selection of cutting conditions and for compliance with industrial classification. Please review and correct the material entry in the product data so a complete, correct description can be produced. If clarification or assistance is required to reconcile the data, contact Metav Werkzeuge by e‑mail at info@metav-werkzeuge.com or by telephone at +49 2822 7131930 so the record can be updated and the product text created.
TCMT 110304 NS9530 Wendeplatten - Tungaloy
Take advantage of the combination of precise finishing performance, low cutting forces and ISO‑compatible mounting for reliable steel turning; order the genuine insert directly via Metav Werkzeuge or ask the consultants for application support. TCMT 110304 NS9530 — Tungaloy turning insert for finishing, uncoated cermet, 0.4 mm radius A TCMT110304 NS9530 indexable turning insert designed for finishing steel, offering a sharp cutting edge, low cutting forces and consistent surface quality in continuous-cut operations. Uncoated cermet grade NS9530 for fine finishing 0.4 mm corner radius for high surface quality ISO‑standard triangular insert, 11 mm inscribed circle Single‑sided chipbreaker, suitable for continuous cuts Superior finishing performance for turned steel components The uncoated cermet composition of this insert is tailored for finishing operations on steel, delivering a sharp edge and reduced adhesion at the cutting zone. As a finishing grade, the insert produces improved surface finish with lower tendency for built-up edge compared with standard carbide in comparable speeds. The combination of a ground cutting edge and the NS9530 grade results in low cutting forces and stable cutting conditions, which in turn minimise chatter and reduce the need for secondary machining. Precision geometry that ensures repeatable results The triangular geometry with an inscribed circle of 11 mm and an included angle of 60° provides predictable cutting kinematics and straightforward indexing. The 0.4 mm corner radius supports small depth-of-cut finishing passes while maintaining edge security, and the 7° relief angle ensures the insert clears the workpiece without rubbing. The cylindrical hole with a one‑sided countersink (40°–60°) secures fast and exact clamping in compatible ISO holders, supporting repeatable positioning and reduced set-up variation. Process advantages: efficiency, consistency and lower rework Designed for continuous cutting, this insert and its single‑sided chipbreaker help control chip flow and reduce interruptions in automated production. The finishing-focused grade reduces the need for slower finishing passes or rework, improving throughput and part conformity. Where surface quality and dimensional accuracy are priorities, the geometry and grade together contribute to shorter cycle times and consistent part quality, offering a clear efficiency gain in series production. System compatibility and practical handling The insert is part of an ISO‑based system comprising the indexable plate, a matching external holder or boring bar, a shim/clamp set and replacement screws. Compatibility with a chosen holder is determined by form, relief angle, tolerance class, fastening method, size and thickness — factors that ensure secure fitment and correct cutting orientation. When replacing an insert, use the specified mounting hardware and check seat cleanliness to preserve the ISO standard seating and repeatable clamping accuracy. Contact Metav Werkzeuge for tailored technical advice on the Tungaloy TCMT110304 NS9530 finishing insert, availability and holder compatibility — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6951416 Manufacturer SKU: TUN6951416 SKU: 6951416-Tungaloy Type designation: TCMT110304 Facts Corner radius: 0.4 mm Thickness: 3.18 mm Inscribed circle: 11 mm Relief angle: 7° Included angle: 60° Special features Material: carbide Grade/coating: NS9530 (uncoated cermet) Geometry: triangular insert Hole: with hole — cylindrical hole + one‑sided countersink (40°–60°) Chipbreaker: single‑sided Typical application: external and internal turning; finishing on steel System components: insert, suitable outer holder or boring bar, shim/clamp set, replacement screws FAQ Which materials is this insert suitable for? The Tungaloy TCMT110304 NS9530 turning insert is optimised for finishing on steel; the NS9530 cermet grade is designed to give low cutting forces and excellent surface quality in continuous cuts. How does the insert secure to a holder? The TCMT110304 seats via a cylindrical hole with a one‑sided countersink (40°–60°); correct holder compatibility depends on form, relief angle, tolerance class, fastening method, size and thickness. What cutting tasks is the chipbreaker designed for? The single‑sided chipbreaker on this insert is intended for continuous cutting and finishing passes, promoting predictable chip flow and stable cutting conditions. Can the insert be used for internal and external turning? Yes — the ISO‑standard triangular shape and 60° included angle make the insert suitable for both external and internal turning when fitted to the appropriate holder. What is the manufacturer article number and SKU? Manufacturer article number: 6951416; Manufacturer SKU: TUN6951416; the item is listed as 6951416‑Tungaloy. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCMT 110304 T5115 Wendeplatten - Tungaloy
Take advantage of a balanced combination of wear resistance and cutting-edge stability for efficient cast-iron turning; the CVD-coated carbide grade ensures predictable tool life and stable chip formation. Order the insert via Metav Werkzeuge or consult the specialists for holder compatibility and application support. TCMT 110304 T5115 TCMT — Tungaloy turning insert (CVD-coated carbide, triangular, 0.4 mm radius) TCMT110304 T5115 Tungaloy turning insert is an ISO-format indexable insert designed for general turning applications, especially adapted for cast-iron machining with a focus on stable edge life and consistent chip control ISO triangular insert TCMT110304 CVD-coated carbide grade T5115 0.4 mm corner radius, 7° clearance Cylindrical hole with single-side countersink Productivity gains through a balanced cutting grade The TCMT110304 is supplied in the CVD-coated carbide grade T5115, a universal choice for machining cast iron thanks to its even compromise between wear resistance and edge stability. This balance translates into fewer insert changes, predictable cycle times and reduced tool-related downtime on the shop floor. The coated substrate helps maintain flank and crater wear at acceptable levels while offering good surface quality on ferritic and grey cast irons. For production environments and job shops aiming to keep throughput high without complex optimisation, this grade delivers measurable process stability. Secure mounting and simple integration into ISO systems The insert follows ISO conventions for shape, tolerance and fastening, so compatibility with matching clamping components is governed by form, relief angle, tolerance class, attachment style, size and thickness. The ISO geometry includes a cylindrical hole with a single-side countersink, enabling dependable clamping on standard triangular pockets. When combined with an appropriate external holder or boring bar, plus a suitable shim and clamping set, the assembly provides repeatable seating and cutting-edge security. Metav Werkzeuge can advise on the correct matching holder and clamping hardware to ensure immediate interchangeability and minimal set-up time. Geometry and chip control that reduce rework A triangular form with a 60° included angle, 0.4 mm corner radius and single-sided chipbreaker offers versatility for both external and internal turning tasks. The insert’s 3.18 mm thickness and size 11 datum give sufficient rigidity for light to medium cuts while the single-sided chipbreaker helps form short, controllable chips in interrupted or continuous turning of cast-iron workpieces. These geometric choices reduce the likelihood of edge chipping under variable feed and depth conditions and simplify post-machining operations by improving surface finish consistency. Contact Metav Werkzeuge for tailored holder recommendations and secure a batch of Tungaloy TCMT110304 T5115 inserts for reliable cast-iron turning in production Technical data Article number: 6864370 SKU: 6864370-Tungaloy Manufacturer SKU: TUN6864370 Brand: Tungaloy Model series: ISO turning indexable inserts Application: Turning Material: carbide Grade: T5115 Facts Thickness: 3.18 mm Corner radius: 0.4 mm Size: 11 Clearance angle: 7° Included angle: 60° Mounting: with hole Special features ISO designation: TCMT110304 CVD-coated carbide grade T5115 Single-sided chipbreaker Triangular form Cylindrical hole with single-side countersink (40°–60°) System: insert, compatible external holder or boring bar, shim/clamp set and replacement screws Typical use: external and internal turning, recommended for cast iron FAQ Which materials is this insert best suited for? The Tungaloy TCMT110304 in grade T5115 is optimised for machining cast iron; the T5115 composition balances wear resistance and edge stability for reliable cast-iron performance. Is the TCMT110304 compatible with standard ISO triangular holders? Yes — the insert follows ISO geometry; compatibility depends on holder form, relief angle, tolerance class, attachment type, size and thickness. What does the single-sided chipbreaker deliver in practice? The single-sided chipbreaker on the TCMT110304 produces shorter, controlled chips during turning, which reduces swarf issues and improves surface finish on cast-iron components. How should the insert be clamped for repeatable results? Use a matching external holder or boring bar with the correct shim and clamping set; the cylindrical hole and countersink ensure secure seating when the correct hardware is applied. Can the TCMT110304 be used for both roughing and finishing? Yes — with suitable feeds and depths the triangular form and 0.4 mm corner radius allow flexibility between light finishing cuts and more aggressive material removal, depending on stability and machine capability. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCMT 110304 T6215 Wendeplatten - Tungaloy
Take advantage of the CVD-coated carbide grade T6215 and precise 60° geometry to ensure stable machining of stainless steels and a low cost per cutting edge. The combination of a 0.4 mm corner radius and ISO-compliant triangular form delivers repeatable edge life and easy indexing. Order the TCMT110304 T6215 turning insert directly via Metav Werkzeuge or ask our consultants if needed. TCMT110304 T6215 — Turning insert (CVD-coated carbide) by Tungaloy TCMT110304 T6215 is an ISO-format triangular insert designed for external and internal turning of stainless steels under stable to slightly interrupted conditions CVD-coated carbide for stainless steels Triangular ISO insert with 60° included angle 0.4 mm corner radius, 3.18 mm thickness One-sided chipbreaker, cylindrical hole + countersink Predictable tool life through CVD-coated carbide grade T6215 The CVD-coated cemented carbide body of the insert provides increased wear resistance and consistent performance when machining stainless steels, a common challenge in production environments. The T6215 grade focuses on durable edge strength and controlled flank wear, which translates into longer intervals between indexings and fewer tool changes. The 60° geometry and 0.4 mm corner radius help to distribute cutting forces, reducing the risk of chipping during stable turning and light interruptions, while the standard thickness ensures compatibility with ISO tooling systems. Fast setup and secure mounting for uninterrupted production The triangular form and the central cylindrical hole with single-side countersink provide reliable clamping and immediate seating in ISO holders. Compatibility with holder types is determined by form, relief angle, tolerance class, fixation method, size and thickness, all of which conform to ISO norms for indexable inserts. The one-sided chipbreaker is matched to the T6215 grade and supports consistent chip formation, improving surface finish and reducing secondary operations. As a result, machine uptime increases and cost per edge decreases, supporting more economical batch processing. Application guidance and process optimisation for turning tasks Designed for a broad range of turning tasks, the insert is suitable for both external and internal operations where stable to lightly interrupted cuts occur. Select the chipbreaker and grade according to workpiece material, cutting parameters and machining stability to achieve the desired balance of surface quality and productivity. For users seeking process advice or detailed cutting data, Metav Werkzeuge can provide support and supplementary technical information to integrate the insert into existing tool systems efficiently. Contact Metav Werkzeuge for ordering and technical consultation on the Tungaloy T6215 insert and compatible holders — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6951413 SKU: 6951413-Tungaloy Manufacturer SKU: TUN6951413 Item designation: TCMT110304 T6215 Tungaloy insert Manufacturer: Tungaloy Facts Included angle: 60° Relief angle: 7° Corner radius: 0.4 mm Thickness: 3.18 mm Size (inscribed circle): 11 mm Hole/countersink: cylindrical hole + single-side countersink (40°–60°) Special features Coating: CVD-coated carbide (T6215) Material: cemented carbide Plate form: triangular Chipbreaker: one-sided Application: turning (external and internal) Series: ISO turning inserts FAQ Is this insert suitable for machining stainless steel? The TCMT110304 T6215 insert is specified for turning stainless steels; its CVD-coated carbide formulation and chipbreaker geometry support stable wear behaviour on such materials. Can this insert tolerate interrupted cuts? The grade T6215 is intended for stable to slightly interrupted cutting conditions; heavy interruptions may require a different grade or geometry to avoid premature edge damage. How many indexings per insert are available? The triangular plate shape provides up to three usable cutting corners, allowing multiple indexings before the insert requires replacement. Which holders are compatible with this insert? Compatibility follows ISO standards: the insert fits ISO-compliant external or internal holders that match the form, clearance angle, tolerance class, fixation and size specified for TCMT110304. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCMT 110304 T6215 Wendeplatten - Tungaloy
Take advantage of a wear-resistant CVD-coated carbide grade and precise ISO compatibility for consistent production results; the combination of a 60° triangular geometry and a 0.4 mm corner radius delivers reliable surface quality and controlled chip flow. Order the insert directly via Metav Werkzeuge or ask the consultants for matching holder and clamp recommendations. TCMT 110304 T6215 — Indexable turning insert (ISO triangular, 60°) by Tungaloy The TCMT110304 T6215 is an ISO-standard triangular indexable insert designed for external and internal turning, optimised for machining stainless steel under stable to lightly interrupted conditions. CVD-coated carbide for stainless steel machining 60° triangular geometry, 7° clearance angle Cylindrical hole with single-side countersink Robust grade T6215 for stable interrupted cuts Consistent fitment and quick tool changes for reduced setup time The ISO-conformant design ensures interchangeability with a wide range of external holders and boring bars: compatibility is determined by the insert form, clearance angle (7°), tolerance class, fastening type, size and thickness (3.18 mm). This standardisation reduces setup complexity and inventory variety, enabling faster tool changes and less downtime. For workshops seeking reliable process repeatability, the standard geometry simplifies holder selection and supports predictable cutting behaviour. Long life and process security from the coating and grade The grade features a CVD-coated carbide substrate in T6215, developed for wear resistance when turning stainless steel. The coating improves flank and crater wear performance, which extends tool life under continuous cutting and short interruptions alike. Selecting this grade means fewer insert changes and a steadier surface finish over batch runs, contributing to lower operating costs and higher throughput in serial production. Geometry tuned for surface quality and chip control Triangular geometry with a nominal included angle of 60° and a 0.4 mm corner radius offers a balanced compromise between strength and edge form for turning applications that demand decent edge resilience and fine finishes. The single-side chipbreaker and the cylindrical hole with a single-side countersink (40°–60°) ensure predictable chip formation and secure clamping. These features help reduce rework and assist in maintaining tool stability when dealing with medium feed rates and varying cutting conditions. Practical system approach and selection guidance In practice, the insert is used as part of a system comprising the ISO insert, a matching external holder or boring bar, a support shim/clamp set and spare fixing screws. For successful application, choose the chipbreaker and grade according to workpiece material, machining strategy and machine stability; for stainless steel, the T6215 grade is suited to stable to mildly interrupted cuts. Technical datasheets and compatibility lists are available to confirm holder geometry and tolerance matches, ensuring a rapid and reliable integration into existing toolsets. For precise stainless steel turning applications, request the Tungaloy TCMT110304 T6215 indexable insert from Metav Werkzeuge for tailored holder recommendations and prompt delivery Technical data Article number: 6903125 Manufacturer SKU: TUN6903125 Label: TCMT110304 T6215 Tungaloy-Wendeplatte Material: Hartmetall Model series: ISO-Drehwendeschneidplatten Facts Inscribed circle / size: 11 Thickness: 3.18 mm Included angle: 60° Clearance angle: 7° Corner radius: 0.4 mm Special features Grade: T6215, CVD-coated carbide Shape: triangular ISO insert Hole: with cylindrical hole + single-side countersink (40°–60°) Chipbreaker: one-sided Application: turning; suitable for stainless steel under stable to lightly interrupted conditions FAQ What materials is this insert designed for? The TCMT110304 T6215 indexable insert is intended primarily for stainless steel machining, with the T6215 grade offering wear resistance for stable to lightly interrupted turning operations. Which holder characteristics must match the insert? Compatibility depends on the holder's form, clearance angle (7°), tolerance class, fastening method, size (11) and thickness (3.18 mm); matching these ensures secure clamping and correct geometry. Does the insert have a chipbreaker and what is its function? Yes, the insert features a one-sided chipbreaker that promotes controlled chip formation and improved evacuation, supporting consistent surface quality in turning operations. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCMT 110304 T6215 Wendeplatten - Tungaloy
Take advantage of the combination of a CVD-coated cemented carbide grade for extended wear resistance and a compact ISO triangular form for straightforward holder compatibility; the result is stable, productive turning of stainless steel under stable to slightly interrupted conditions. Order genuine Tungaloy inserts via Metav Werkzeuge or consult our specialists for tool pairing and process optimisation. TCMT 110304 T6215 turning insert by Tungaloy — CVD-coated carbide, 7° rake A TCMT110304 T6215 Tungaloy turning insert engineered for general external and internal turning, offering robust wear resistance for stainless steel in stable to lightly interrupted cuts CVD-coated cemented carbide grade T6215 ISO TCMT110304 triangular form 7° rake angle for reliable chip control One-sided chipbreaker for stable cutting Consistent chip control for predictable component quality The triangular insert delivers a controlled cutting action that reduces variation in surface finish and tool wear. The CVD-coated surface on the cemented carbide substrate improves adhesion and abrasion resistance, which translates into longer service intervals and more consistent part dimensions. In practice, the single-sided chipbreaker and the modest corner radius contribute to uniform chip formation, reducing the risk of built-up edge during the machining of stainless steel and enabling dependable cycle times on stable to slightly interrupted turning operations. Seamless integration with ISO holders to simplify process planning Designed to the ISO model series for turning indexable inserts, the geometry and tolerance class of the triangular blank ensure compatibility with a wide range of standard external holders and boring bars. The central locating hole with a cylindrical bore and single-sided countersink (40°–60°) facilitates secure clamping and repeatable seating. This standardisation reduces set-up time and makes tool inventory management more efficient while maintaining the expected cutting geometry across tool changes. Durable grade and geometry for cost-effective production The T6215 grade is specified for wear resistance during stainless steel machining, offering a balance between edge stability and toughness. The insert’s 0.4 mm corner radius and 3.18 mm thickness provide a robust cutting edge for routine turning tasks, while the 7° rake angle supports versatile cutting conditions. Together, these attributes help to extend insert life and reduce downtime, contributing to lower per-part tooling costs and improved overall productivity. Contact Metav Werkzeuge for assistance in matching holders and operational parameters for the Tungaloy TCMT110304 T6215 insert — email info@metav-werkzeuge.com or call +49 2822 7131930 to request original inserts and application advice Technical data Article number: 6903116 Manufacturer SKU: TUN6903116 Brand: Tungaloy Designation: TCMT110304 T6215 Model series: ISO turning indexable inserts Material: Cemented carbide Facts Corner radius: 0.4 mm Included angle: 60° Rake angle: 7° Plate thickness: 3.18 mm Plate size: 11 mm Special features CVD-coated carbide grade T6215 One-sided chipbreaker Triangular plate form With central hole; cylindrical hole + single-sided countersink (40°–60°) Application: turning Suitable for stainless steel machining FAQ Which holders are compatible with this insert? The TCMT110304 T6215 insert is ISO‑conforming in form and dimensions, so it is compatible with standard TCMT external holders and boring bars that accept triangular TCMT inserts. What materials is the grade designed for? The T6215 grade is engineered for wear resistance when machining stainless steel, providing a balance of edge life and stability under typical turning conditions. How does the chipbreaker affect performance? The one-sided chipbreaker promotes reproducible chip formation and evacuation; this enhances surface finish and reduces the likelihood of built-up edge during continuous and lightly interrupted cuts. What are the critical geometry values to check when specifying a holder? Relevant dimensions include the 60° included angle, 0.4 mm corner radius, 3.18 mm thickness and the central hole with countersink; matching these ensures correct seating and clamping force. Is this an original Tungaloy product and how is traceability provided? This item is offered as the original Tungaloy TCMT110304 T6215 insert; the manufacturer article number 6903116 and manufacturer SKU TUN6903116 provide traceability. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCMT 110304 T6215 Wendeplatten - Tungaloy
Benefit from the combination of a CVD-coated carbide grade for long tool life, a precise 0.4 mm corner radius for consistent part finish, and ISO compatibility for simple integration; order the TCMT110304 T6215 turning insert directly via Metav Werkzeuge or ask our consultants if needed. TCMT 110304 T6215 ISO turning insert by Tungaloy — triangular, CVD-coated carbide, 7° relief TCMT110304 T6215 is an ISO-standard triangular turning insert designed for external and internal turning of stainless steels under stable to lightly interrupted cutting conditions. CVD-coated carbide for stainless steel machining Triangular ISO insert, 11 mm size 7° relief angle for stable cutting Cylindrical hole with single-sided countersink Increased productivity through wear-resistant coating The CVD-coated carbide grade T6215 delivers predictable abrasion resistance, which extends tool life and reduces unplanned insert changes. This wear resistance translates into fewer machine stops and a steadier production rhythm when machining stainless steel, so cycle times and process costs are lowered. The single-sided chipbreaker supports controlled chip flow, improving surface integrity and reducing secondary operations. Consistent surface quality and dimensional control With an included angle of 60°, a precise 0.4 mm radius and a 7° relief, the insert provides repeatable cutting geometry for tight tolerances and consistent finishes. The triangular form offers three usable cutting edges per insert, increasing economy per index. The CVD layer enhances edge robustness against built-up edge formation common in stainless steel turning, helping to maintain part accuracy over extended runs and ensuring compliant surface characteristics. Simple compatibility and secure clamping for reliable set-up The insert follows ISO designation TCMT110304 and features a cylindrical hole with a single-sided countersink (40°–60°) for standard clamping systems. Compatibility with holders depends on form, relief, tolerance class, fixation, size and thickness; this standardisation simplifies tool selection and reduces inventory complexity. The 11 mm size and 3.18 mm thickness suit many external holder systems, enabling quick replacement and minimised set-up time. Practical selection advice for turning applications For turning applications where material stability and surface finish matter, select the grade T6215 and the single-sided chipbreaker when working with ferritic or austenitic stainless steels under stable conditions. If intermittent cuts or heavy interruptions are expected, consider a modified cutting strategy or different chipbreaker geometry to protect the edge. Technical queries on holder matches or process parameters can be clarified with the supplier to ensure the chosen insert aligns with the machining strategy. For robust, long-life performance with stainless steel turning, request the TCMT110304 T6215 from Metav Werkzeuge or contact their experts for tailored mounting and cutting-parameter advice at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6951448 Manufacturer SKU: TUN6951448 SKU: 6951448-Tungaloy Model series: ISO turning inserts Type designation: TCMT110304 Manufacturer: Tungaloy Facts Size: 11 mm Thickness: 3.18 mm Relief angle: 7° Included angle: 60° Corner radius: 0.4 mm Special features Carbide substrate, CVD-coated (grade T6215) Suitable for stainless steel turning under stable to lightly interrupted conditions Triangular insert form, three cutting edges Single-sided chipbreaker Cylindrical hole with single-sided countersink (40°–60°) ISO designation TCMT110304 Compatibility determined by form, relief angle, tolerance class, fixation, size and thickness FAQ What materials is this insert designed for? The TCMT110304 T6215 insert is specified for machining stainless steel under stable to lightly interrupted conditions and is formulated to resist typical abrasive wear in such materials. Which clamping systems fit this insert? The insert uses an ISO triangular form with a cylindrical hole and single-sided countersink; compatibility depends on holder form, relief, tolerance class, fixation, size and thickness—refer to the holder specifications to confirm fit. How many cutting edges are available per insert? The triangular geometry provides three usable cutting edges per insert, increasing economy through multiple indexes before replacement. What surface finish improvements can be expected? The combination of a 0.4 mm radius and CVD-coated carbide helps maintain edge stability and reduce built-up edge, producing more consistent surface finishes on turned parts. Is the chip control suitable for automatic production environments? Yes, the single-sided chipbreaker promotes controlled chip formation, supporting automated operations by reducing entanglement and easing chip evacuation. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCMT 110304 T9215 Wendeplatten - Tungaloy
Combining CVD‑coated carbide grade T9215, a 0.4 mm corner radius and a 7° clearance angle, this insert delivers high wear resistance and fracture toughness for productive mid‑range steel turning. Order the TCMT110304 T9215 insert directly via Metav Werkzeuge or ask our consultants if needed. TCMT110304 T9215 TCMT indexable insert for turning, CVD‑coated carbide — Tungaloy The TCMT110304 T9215 is an ISO‑standard triangular indexable insert for external and internal turning, engineered to combine wear resistance and toughness for continuous to lightly interrupted steel machining. Triangular TCMT insert, ISO 110304 CVD‑coated carbide grade T9215 0.4 mm corner radius for controlled chamfers 7° clearance angle, with locating hole Productivity gains through a wear‑resistant cutting grade The combination of a CVD‑coated surface and a wear‑resistant carbide substrate in grade T9215 ensures sustained cutting performance when machining steel. This specification is the logical choice for operations that demand a balance between tool life and machining speed; the coating reduces abrasive wear while the substrate maintains fracture toughness, lowering the incidence of unexpected edge failure. For production environments, the result is fewer tool changes and a steadier part flow, contributing directly to overall manufacturing efficiency and predictable cycle times. Geometry engineered for reliable cutting and finish The insert’s triangular form with an included angle of 60°, a 0.4 mm corner radius and 7° clearance provides a predictable cutting geometry that supports stable chip formation and consistent surface quality. The 3.18 mm plate thickness and an inscribed circle of 11 mm provide rigidity in the seat, helping to prevent chatter when used with a correctly matched holder. The cylindrical hole with a single‑side countersink (40°–60°) enables standard clamping arrangements; compatibility with a given toolholder depends on form, relief angle and tolerance class, so selection of the appropriate holder is crucial for transferring the insert’s performance into repeatable part quality. Practical application advice and selection logic Designed primarily for turning applications on steel, this insert is appropriate for both external and internal operations when paired with a suitable holder or boring bar. The single‑sided chipbreaker and the grade’s resistance characteristics make it well suited to continuous and slightly interrupted cuts typical in bar‑feeding or semi‑finishing cycles. When specifying tooling, choose the chipbreaker and grade to match the workpiece material and stability of the setup; a stiffer assembly and optimal cutting data will unlock the grade’s productivity advantage and extend effective tool life. For mixed material shops that handle a variety of steels, this insert offers a reliable baseline for standard turning tasks. For application support or to secure supplies of Tungaloy TCMT110304 T9215 inserts, contact Metav Werkzeuge — Metav Werkzeuge can advise on holder compatibility and cutting data or supply the inserts directly: info@metav-werkzeuge.com, +49 2822 7131930 Technical Data Article number: 6951446 Manufacturer SKU: TUN6951446 SKU: 6951446-Tungaloy Name: TCMT110304 T9215 Tungaloy indexable insert Model series: ISO turning indexable inserts Facts Insert form: triangular Inscribed circle: 11 mm Plate thickness: 3.18 mm Corner radius: 0.4 mm Relief/clearance angle: 7° Included angle: 60° Hole: with cylindrical hole + single‑side countersink (40°–60°) Special features Coating: CVD coating Substrate: carbide Grade: T9215, for medium steel machining Chipbreaker: single‑sided Typical applications: external and internal turning System components: ISO insert, matching external holder or boring bar, shim/clamp set, replacement screws FAQ What materials is this insert designed for? The TCMT110304 T9215 insert is specified for machining steel, where its CVD‑coated carbide construction provides the necessary wear resistance and toughness for mid‑range turning operations. How is the insert clamped and what hole style does it use? Clamping is achieved via a central cylindrical locating hole with a single‑side countersink (40°–60°); the seating geometry suits standard ISO triangular indexable holders when matched for form and tolerance. Which cutting conditions favour this grade? Grade T9215 performs best in continuous to lightly interrupted cuts at moderate to high speeds for steel; optimise feed and depth of cut in line with holder rigidity to prolong tool life. Can the insert be used for internal boring? Yes, the insert is suitable for internal turning when fitted to an appropriate boring bar designed for ISO triangular inserts and the machining setup provides adequate rigidity. How does the 0.4 mm corner radius affect surface finish? The 0.4 mm radius offers a controlled chamfer that balances edge strength with the ability to achieve consistent surface finish; it reduces the risk of edge chipping compared with smaller radii while maintaining acceptable part geometries. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com