TCMT 110204 GH730 Wendeplatten - Tungaloy
High wear resistance and consistent cutting-edge stability reduce unplanned tool changes and support steady production cycles; the GH730 grade and a 0.4 mm nose radius deliver a balance of wear resistance and edge life for reliable turning results. Order the TCMT 110204 GH730 Tungaloy indexable insert directly via Metav Werkzeuge or ask our consultants if needed. TCMT 110204 GH730 Tungaloy indexable insert for turning, 0.4 mm radius, 7° clearance The TCMT 110204 GH730 is an ISO triangular indexable insert engineered for external and internal turning operations, offering controlled chip formation and stable edge performance in demanding machining tasks. GH730 grade for enhanced wear resistance ISO triangular form with three cutting edges 0.4 mm nose radius for fine profiling 7° clearance with cylindrical hole and countersink Engineered for consistent, high-performance turning The insert is made from carbide and specified in the GH730 grade, combining hardness and toughness to maintain a stable cutting edge under intermittent and continuous cuts. Thanks to the optimised grade, the insert supports improved chip control and predictable abrasion behaviour, which contributes directly to longer tool life and fewer machining interruptions. For shops focused on throughput and repeatability, the ISO geometry ensures compatibility with standard indexable holders while the coating and substrate interaction prioritise sustained performance over multiple workpieces. Simple compatibility and economical handling Designed to the ISO designation TCMT110204, the triangular format offers three indexable edges, reducing the number of replacements per part produced and lowering tooling costs. Mounting is determined by form, clearance and tolerance class; this insert features a cylindrical hole with a one-sided countersink (40°–60°) for secure clamping and predictable seating. The plate thickness of 2.38 mm, the inscribed size of 11, a 0.4 mm nose radius and a 7° clearance angle together make setup straightforward and repeatable, helping to shorten changeover times and simplify tool inventory management. Operational advantages and recommended application Best suited for turning, the insert performs well in external and internal cuts when paired with an appropriate chipbreaker and stable tool holding. The one-sided chipbreaker geometry complements the GH730 grade by shaping chips for safe evacuation and helping to reduce cutting forces in many common turning tasks. For process planning, select the chipbreaker and the positive/negative geometry according to workpiece material and machine rigidity; where vibration is controlled, the combination of 0.4 mm nose radius and GH730 delivers fine surface finishes without sacrificing edge life. If additional machining data or suitability guidance is required, the Metav Werkzeuge technical team can provide recommendations for feeds, speeds and holder selection. For reliable turning with Tungaloy performance and clear application guidance, contact Metav Werkzeuge to secure the TCMT 110204 GH730 insert or request tailored machining advice. Technical data Article number: 6821004 Manufacturer item number: 6821004 Manufacturer SKU: TUN6821004 SKU: 6821004-Tungaloy Model series: ISO indexable turning inserts Dimensions & core data Size: 11 Thickness: 2.38 mm Nose radius: 0.4 mm Clearance angle: 7° ISO designation: TCMT110204 Design & special features Shape: triangular Hole: cylindrical hole + one-sided countersink (40°–60°) Chipbreaker: one-sided Grade: GH730 Material: carbide Application: turning FAQ What holder types are compatible with this insert? Compatibility depends on holder form, free angle, fastening and tolerance class; the TCMT 110204 GH730 fits standard ISO triangular turning holders designed for TCMT inserts. Which materials is this grade best suited for? The GH730 grade is formulated to balance wear resistance and edge stability, making the insert suitable for a wide range of turning tasks; select the chipbreaker and cutting parameters according to the workpiece material and machining conditions. How many cutting edges are available per insert? The triangular format provides three indexable cutting edges; rotation and indexing extend the effective life of each insert and reduce tooling costs. Is there guidance for feeds and speeds with this insert? Recommended cutting data depend on workpiece material, machine rigidity and holder stability; Metav Werkzeuge can supply tailored feeds and speeds for the TCMT 110204 GH730 based on the application. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCMT 110204 GT9530 Wendeplatten - Tungaloy
Take advantage of the coated cermet grade and the 0.4 mm nose radius to achieve consistent surface finish and longer tool life in stable turning operations; the ISO‑conforming triangular geometry with a 60° angle ensures predictable seating and repeatable results. Order the TCMT110204 GT9530 insert directly via Metav Werkzeuge or request advice from our consultants for application matching. TCMT110204 GT9530 Tungaloy indexable insert for turning — coated cermet, 0.4 mm nose radius TCMT110204 GT9530 is an ISO‑standard triangular insert designed for finishing and light universal turning of steel under stable conditions Coated cermet grade GT9530 For finishing and light universal turning ISO‑conforming triangular insert, 60° 0.4 mm nose radius, single‑sided chipbreaker Consistent finishing and extended tool life for stable production The coated cermet composition of this insert provides a wear‑resistant cutting edge that produces improved surface quality compared with conventional grades when used under consistent, stable conditions. Cermet combines ceramic and metallic binders to reduce flank wear and improve finish; the result is fewer rework cycles and longer intervals between index changes. The modest nose radius (0.4 mm) helps balance robustness and fine surface definition, making the geometry suitable for light finishing passes where dimensional accuracy and appearance matter. Reliable fit and repeatable mounting for process stability Compatibility with the toolholder is governed by form, relief angle (7°), tolerance class, fastening method and the insert’s size and thickness; this ISO‑conforming design simplifies selection and reduces setup time. The triangular plate with a central hole and a cylindrical hole plus one‑sided countersink (40°–60°) secures the insert reliably, while the 60° included angle provides predictable seat orientation. Using inserts that match holder specifications ensures consistent clamping, repeatable runout and stable chip formation—practical prerequisites for predictable cycle times and consistent component quality. Practical benefits of the GT9530 grade in workshop use The GT9530 grade is optimised for wear resistance and surface quality in steel turning applications, offering a good compromise between life and finish. Its single‑sided chipbreaker is designed to support continuous chips under stable cutting conditions and to direct chips away from the cutting zone, reducing the risk of re‑cutting. With a plate thickness of 2.38 mm and nominal plate size of 11 mm, the geometry is compact yet suited to a wide range of light turning operations, both external and internal. For shops seeking predictable finishing performance and a simple grade classification, this insert provides a dependable option. For precision finishes and reliable performance choose the Tungaloy GT9530 inserts — contact Metav Werkzeuge for availability and tailored advice on integrating these ISO‑conforming inserts into existing turning setups. Technical data Article number: 6998349 Manufacturer SKU: TUN6998349 SKU: 6998349-Tungaloy Model series: ISO‑Drehwendeschneidplatten Designation: TCMT110204 GT9530 Tungaloy‑insert Facts Included angle: 60° Relief/clearance angle: 7° Plate thickness: 2.38 mm Plate size: 11 mm Nose radius: 0.4 mm Special features Coated cermet grade GT9530 Material: cemented carbide Single‑sided chipbreaker Triangular plate with hole and cylindrical hole + one‑sided countersink (40°–60°) Application: finishing to light universal turning of steel FAQ How can I check holder compatibility for this insert? Compatibility is determined by the holder’s form, relief angle, tolerance class, fastening method and the insert’s size and thickness; the TCMT110204 GT9530 follows ISO geometry to ease selection and mounting. Is the GT9530 grade suitable for heavy roughing? GT9530 is formulated as a wear‑resistant finishing to light universal grade for steel; it is not optimised for heavy roughing where more robust grades are normally preferred. What does the central hole and countersink mean for clamping? The central hole with a cylindrical bore and one‑sided countersink (40°–60°) provides positive location and secure clamping in compatible ISO‑type holders, ensuring repeatable seating for the TCMT110204 geometry. Which work materials is this insert intended for? This insert is intended primarily for steel turning under stable cutting conditions where improved surface finish and extended tool life are required. What effect does the 0.4 mm nose radius have on the machined surface? A 0.4 mm nose radius balances edge strength with the ability to produce fine surface finish; it reduces scallop height compared with a smaller radius while keeping cutting forces moderate, suitable for finishing passes. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
TCMT 110204 NS9530 Wendeplatten - Tungaloy
Benefit from the combination of a sharp cermet cutting edge and ISO-standard compatibility for consistent finishing results; order directly via Metav Werkzeuge or consult our product specialists for application-specific advice. The reliable clamping geometry and low cutting forces make this insert a practical choice for stable, high-quality turning. TCMT 110204 NS9530 — ISO triangular indexable insert for finishing turning, Tungaloy The TCMT110204 NS9530 is an ISO-standard triangular indexable insert optimised for finishing operations on steel, offering a sharp cutting edge and low cutting forces for continuous cuts and small depths of cut. ISO triangular insert, 60° geometry Uncoated cermet NS9530 for finishing Sharp cutting edge, low cutting forces Cylindrical hole with countersink for secure clamping Precision finishing tailored to steel turning The uncoated cermet grade NS9530 is specified for fine finishing on steel, delivering a sharp cutting edge that reduces cutting forces and improves surface quality during continuous cuts and small depths of cut. This material selection aims to balance edge retention and surface integrity: the cermet substrate provides the sharpness required for light passes while maintaining dimensional stability. For workshops seeking consistent surface finish, the result is a predictable part quality with fewer rework cycles and reduced secondary operations. Secure clamping and simple holder compatibility Compatibility with toolholders is determined by form, rake angle, tolerance class, fixation, size and thickness. The insert’s cylindrical hole with a one-sided countersink (40°–60°) ensures rigid and repeatable clamping in standard ISO seats, while the 2.38 mm thickness and 11-size designation fit common external holders and boring bars. The 0.4 mm corner radius offers a compromise between edge strength and finishing quality; when paired with the 7° relief angle, it helps to reduce rubbing and minimise built-up edge on long-running operations. Reliable productivity with a finishing-focused geometry The single-sided chipbreaker and triangular outline provide straightforward indexing and modest chip control suitable for finishing passes. As part of a conventional system—insert, compatible external holder or boring bar, and the appropriate shim/clamp set—the component integrates smoothly into existing tool inventories. The design supports efficient process flow by enabling quick indexing and repeatable set-up, which contributes to reduced machine downtime and consistent component tolerances when machining rotational parts. Contact Metav Werkzeuge for tailored advice on Tungaloy finishing inserts or to discuss holder compatibility — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6998516 SKU: 6998516-Tungaloy Manufacturer SKU: TUN6998516 Model series: ISO-Drehwendeschneidplatten Core specifications Shape: triangular (TCMT) ISO designation: TCMT110204 Size: 11 Thickness: 2.38 mm Corner radius: 0.4 mm Relief angle: 7° Included angle: 60° Hole: cylindrical with one-sided countersink (40°–60°) Features and applications Grade: NS9530 (uncoated cermet) Chipbreaker: single-sided Intended use: finishing for steel, continuous cuts, small depths of cut System composition: ISO insert, matching external holder or boring bar, shim/clamp set and replacement screws Compatibility criteria: form, relief angle, tolerance class, fixation, size and thickness FAQ Which materials is this insert suitable for? The NS9530 uncoated cermet is designed primarily for finishing on steel; its sharp cutting edge and low cutting forces make the insert particularly suitable for steel finishing operations. How does the insert secure to the holder? The insert uses a cylindrical hole with a one-sided countersink (40°–60°) to ensure secure clamping in ISO-compatible holders, providing repeatable seating and stable cutting conditions. Is this insert suitable for internal and external turning? Yes, the triangular form and standard ISO designation allow use in both external and internal turning applications when paired with the appropriate holder or boring bar. What cutting conditions are recommended for the NS9530 grade? This grade is optimised for finishing with continuous cuts and small depths of cut; its characteristics favour low cutting forces and high surface quality rather than heavy roughing passes. How does the 0.4 mm corner radius affect the finish? A 0.4 mm corner radius balances tool edge strength and surface quality: it helps maintain a sharp profile for fine finishes while offering sufficient robustness against minor vibrations. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCMT 110204 NS9530 Wendeplatten - Tungaloy
Take advantage of the combination of precise finishing performance, ISO compatibility and a finishing-grade cermet for improved surface quality in continuous turning operations; order the insert directly via Metav Werkzeuge or consult our team for application-specific advice. TCMT110204 NS9530 TCMT 110204 ISO turning insert — uncoated cermet, 7° clearance, 60° triangle (Tungaloy) The TCMT110204 NS9530 is an ISO-standard triangular turning insert designed for finishing steel in continuous turning and small depths of cut, delivering low cutting forces and excellent surface quality. Uncoated cermet finishing grade NS9530 Sharp cutting edge for fine surface finish 7° clearance angle for stable cuts 0.4 mm corner radius for precise profiling Achieve fine finishes with low cutting forces The NS9530 finishing grade is an uncoated cermet engineered for steel finishing where surface quality is critical. Its sharp cutting edge and low cutting-force characteristics reduce tool–workpiece friction, which helps to produce smoother surfaces and minimise the need for secondary operations. For manufacturers seeking consistent part finish, this grade delivers repeatable outcomes in continuous turning, especially with small depths of cut and stable set-ups. The combination of a fine 0.4 mm corner radius and a sharp edge means improved dimensional control and reduced burr formation on machined components. Simple integration through ISO compatibility As an ISO-design insert in the TCMT form family, the insert fits a broad range of approved holders provided the seat geometry, clearance, tolerance class, fastening method, size and thickness match. The insert geometry features a 60° triangle and a 2.38 mm thickness, with a cylindrical hole and single-sided countersink (40°–60°) which supports secure clamping and correct orientation in standard external and internal turning toolholders. By specifying the correct holder and clamping kit, workshops can integrate this insert without complex adaptations, reducing set-up time and maintaining process reliability. Practical advice for process selection Select the one-sided chipbreaker and the NS9530 grade specifically for continuous feeds and finishing passes; the chip control should match material stability and the intended feed rate. Because the grade is optimised for continuous cutting, it is not intended primarily for heavy interrupted cuts — choose a more robust grade if interruptions or heavy cuts are frequent. Careful matching of feed, depth of cut and cutting speed will exploit the material’s strength: lower cutting forces and superior surface finish, often reducing cycle time by lowering the need for polishing or additional finishing. Benefits for production and part quality Using an insert of this specification supports stable, productive machining: the uncoated cermet gives excellent wear resistance on finishing passes, while the modest corner radius enhances edge strength without sacrificing profile accuracy. For precision components where surface integrity and dimensional stability matter, this insert contributes to fewer rejects and consistent batch-to-batch quality. The ISO-standard form and reliable clamping features also enable predictable repeatability across fixtures and machines, which helps maintain capacity planning and throughput in small- to medium-volume production. Discuss specific machining requirements with Metav Werkzeuge to confirm whether the TCMT110204 NS9530 insert is the optimal finishing solution for the application; contact Metav Werkzeuge by e‑mail at info@metav-werkzeuge.com or by phone at +49 2822 7131930 for tailored recommendations Technical Data Article number: 6998625 Manufacturer article number: 6998625 SKU: 6998625-Tungaloy Manufacturer SKU: TUN6998625 Model series: ISO-Drehwendeschneidplatten Application: Turning Material: cemented carbide Key specifications Form designation: TCMT110204 Size: 11 mm Thickness: 2.38 mm Included angle: 60° Clearance angle: 7° Corner radius: 0.4 mm Features & application details Grade: NS9530 (uncoated cermet) Chipbreaker: one-sided Hole: with cylindrical hole + single-sided countersink (40°–60°) Plate form: triangular Typical use: finishing steel in continuous turning FAQ What is the primary application for this insert? The TCMT110204 NS9530 insert is intended for finishing operations in turning, especially continuous cuts and small depths of cut on steel, where a fine surface finish is required. Which materials suit the NS9530 grade? The NS9530 uncoated cermet grade is optimised for machining steel in finishing passes; choose the NS9530 insert when low cutting forces and high surface quality are priorities. How does the insert mount in a holder? The ISO TCMT form and the cylindrical hole with a single-sided countersink ensure secure clamping in compatible TCMT holders; compatibility depends on shape, clearance, tolerance class, fastening and size. Can this insert be used for internal turning? Yes — the geometry and thin profile of the TCMT110204 make it suitable for both external and internal turning applications provided the holder accommodates the 11 mm size and the 2.38 mm thickness. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCMT 110204 NS9530 Wendeplatten - Tungaloy
Take advantage of the combination of a sharp cutting edge, low cutting forces and ISO compatibility for consistent finishing results; order the insert directly via Metav Werkzeuge or consult the team for selection advice. TCMT 110204 NS9530 — Tungaloy indexable insert for turning (finishing) A TCMT110204 NS9530 indexable insert designed for precision finishing in turning operations, offering a sharp uncoated cermet grade and ISO 60° triangular geometry for reliable surface quality. Sharp cermet cutting grade NS9530 for finishing Triangular ISO insert TCMT 60° geometry Nose radius 0.4 mm for fine surface finish Cylindrical hole with single-sided countersink Consistent finishing performance with an uncoated cermet grade The NS9530 composition is an uncoated cermet formulated for finishing operations on steel. Its main advantages are a sharp cutting edge and low cutting forces, which together reduce built-up edge and support stable, continuous cutting with small depths of cut. Where a high-quality surface is required, the combination of material and geometry results in fewer passes to reach the target tolerance, helping to streamline turning processes while maintaining reproducible results. Precision geometry and secure clamping for repeatable accuracy Built to ISO standards, the insert features a 60° geometry in a triangular shape with a 0.4 mm nose radius, providing close dimensional control and a fine surface texture. The plate thickness of 2.38 mm and the specified hole style — cylindrical hole with single-sided countersink (40°–60°) — ensure correct seating in compatible holders. Compatibility with a holder is determined by form, clearance angle, tolerance class, fastening method, size and thickness; correct pairing reduces vibration and preserves edge integrity. System benefits and recommended applications for turning The model series is intended for ISO-format turning inserts and is suited to both external and internal turning. Typical system assembly comprises the ISO turning insert, a matching external holder or boring bar, a shim/clamp set and replacement screws. The single-sided chipbreaker and finishing grade recommend this insert for continuous, low-depth cuts where surface finish and dimensional consistency are priorities. Selecting the appropriate chipbreaker and grade for the workpiece material and stability will deliver the best economy and process reliability. For technical application support or availability of the Tungaloy NS9530 finishing insert, contact Metav Werkzeuge: info@metav-werkzeuge.com or +49 2822 7131930 — specialists are available to advise on holder compatibility and process setup Technical data Article number: 6997722 SKU: 6997722-Tungaloy Manufacturer SKU: TUN6997722 Model series: ISO-Drehwendeschneidplatten Manufacturer: Tungaloy Product name: TCMT110204 NS9530 Tungaloy-Wendeplatte Core data Included angle: 60° Nose radius: 0.4 mm Clearance angle: 7° Plate thickness: 2.38 mm Plate size: 11 ISO designation: 110204 Special features Grade: NS9530 (uncoated cermet) Single-sided chipbreaker With hole: cylindrical hole + single-sided countersink (40°–60°) Triangular plate form Intended application: turning (external and internal) Designed for finishing steel with low cutting forces and excellent surface finish FAQ What materials is this insert designed to machine? This insert is specified as a finishing grade for steel; the TCMT110204 NS9530 is optimised for steel turning where a sharp cutting edge and fine surface quality are required. Is the insert coated or uncoated? The grade is an uncoated cermet (NS9530), chosen for finishing applications that demand low cutting forces and reduced tendency for built-up edge. Which operations suit this insert best? The insert is intended for external and internal turning, particularly continuous cuts and small depths of cut where surface finish and dimensional control are key. How does the hole and countersink affect clamping? The cylindrical hole with single-sided countersink (40°–60°) ensures secure seating and repeatable clamping in compatible ISO holders, improving stability and accuracy during turning. What geometry details are most relevant for choosing a holder? Key geometry values are the 60° included angle, 0.4 mm nose radius and 2.38 mm thickness; matching holder form, clearance angle, tolerance and fastening method is essential for correct fit and optimal performance. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCMT 110204 NS9530 Wendeplatten - Tungaloy
Reliable finishing performance for demanding turning operations: the combination of the NS9530 uncoated cermet grade and the 0.4 mm corner radius delivers low cutting forces and excellent surface finish on Stahl; compatibility with ISO toolholders ensures straightforward integration. Order directly via Metav Werkzeuge or consult our specialists for application support. TCMT 110204 NS9530 turning insert — Tungaloy triangular 60° 0.4 mm radius TCMT 110204 NS9530 is an ISO triangular finishing insert designed for external and internal turning, offering a sharp cutting edge for continuous cuts and fine surface quality on Stahl. ISO triangular insert, 60° geometry Uncoated cermet grade NS9530 for finishing 0.4 mm corner radius for fine surface quality Cylindrical hole with 40°–60° countersink Precision finishing for high-surface-quality turning The insert is designed as a finishing grade with an uncoated cermet composition, optimised to produce low cutting forces and a refined surface on Stahl. The combination of the NS9530 grade and a sharp edge geometry supports continuous cutting and small depths of cut, reducing chatter and allowing consistent, repeatable surface results. For machining processes where dimensional accuracy and surface integrity matter, this geometry and material pairing minimise the need for secondary operations and help maintain process stability. Built for straightforward toolholder compatibility and secure clamping The plate conforms to ISO dimensions and uses a triangular format with a cylindrical hole plus one-sided countersink (40°–60°), so compatibility with common ISO external holders and boring bars is clarified by form, clearance angle, tolerance class, clamping method, size and thickness. The 60° included angle and 2.38 mm plate thickness provide mechanical stability during indexing, while the central hole and countersink ensure consistent seating and torque transmission. This clear mechanical interface reduces set-up time and supports predictable tool life in series production. Low forces and chip control for efficient finishing cycles A 0.4 mm corner radius combined with a single-sided chipbreaker reduces cutting resistance and improves chip formation at finishing parameters. The result is lower power draw, reduced tool deflection and a smoother machined surface. Where small feed and depth-of-cut values are used, the insert’s geometry keeps radial and axial forces low, supporting higher spindle speeds and improved cycle times without compromising surface quality. The insert suits both external and internal turning tasks where a stable, sharp edge is required. For application-specific recommendations on Tungaloy finishing inserts and to secure the TCMT 110204 NS9530, contact Metav Werkzeuge for tailored advice — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6997725 SKU: 6997725-Tungaloy Manufacturer SKU: TUN6997725 Core measurements ISO designation: 110204 Inscribed circle: 11 mm Plate thickness: 2.38 mm Corner radius: 0.4 mm Clearance angle: 7° Included angle: 60° Design & special features Insert form: triangular Cutting grade: NS9530 Cutting material: uncoated cermet Chipbreaker: single-sided Hole style: cylindrical hole + one-sided countersink (40°–60°) Application: external and internal turning FAQ Which materials is this insert intended for? The TCMT 110204 NS9530 is a finishing insert optimised for machining Stahl; the uncoated cermet grade provides a sharp edge and low cutting forces for fine surface finishes. How is holder compatibility determined? Compatibility depends on insert form, clearance angle, tolerance class, clamping style, size and thickness; the ISO 110204 designation and the plate dimensions ensure reliable matching with standard ISO turning holders. What advantages does the NS9530 uncoated cermet offer? NS9530 offers a sharp, wear-resistant cutting edge that reduces cutting forces and improves surface integrity during finishing operations, especially in continuous cut regimes. Can this insert be used for both internal and external turning? Yes; the triangular ISO geometry and central hole with countersink make the insert suitable for both external turning and internal boring operations when paired with the correct holder. What chip control can be expected with this design? The single-sided chipbreaker promotes controlled chip formation during finishing, aiding evacuation and reducing the risk of built-up edge at recommended feeds and depths. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCMT 110204 T5115 Wendeplatten - Tungaloy
Benefit from the combination of a CVD-coated T5115 grade and a compact triangular geometry with a 0.4 mm corner radius for stable, economical turning in cast iron; order the insert via Metav Werkzeuge or consult the technical team for holder compatibility. TCMT 110204 T5115 indexable turning insert by Tungaloy — CVD-coated carbide, triangle, 7° relief A TCMT110204 T5115 indexable turning insert engineered for external and internal turning, offering a universal grade optimised for cast iron machining and reliable edge stability. CVD-coated T5115 grade for durable wear Optimised for grey cast iron machining Triangular TCMT110204 geometry, 7° relief Central hole with 40°–60° countersink Stable cutting and reliable compatibility for reduced downtime The triangular indexable insert offers a compact design that supports repeatable seating and clamping, reducing setup time and the risk of misalignment. Compatibility with a holder depends on form, relief angle, tolerance class, fastening method, size and thickness; this ensures precise fitment when the matching TCMT holder is used. The predictable interface between insert and seat contributes directly to process stability, lowering the likelihood of vibration-induced tool wear and improving cycle-to-cycle consistency. Coating and grade designed for cast iron productivity The CVD-coated T5115 grade combines wear resistance with cutting edge robustness, making it suitable as a universal choice for grey cast iron. Chemical vapour deposition (CVD) applies a hard, abrasion-resistant layer to the carbide substrate, which slows flank and crater wear under typical turning stresses. For users unfamiliar with coating terminology: the coating extends tool life by protecting the cutting edge from heat and abrasion, enabling longer uninterrupted production runs and fewer insert changes. Geometry and edge design for controlled chip formation With a 0.4 mm corner radius and a 7° relief angle, the insert balances edge strength and the need for a controlled cutting edge for finishing or light roughing passes. The single-sided chipbreaker and the triangular shape provide three indexed cutting corners per insert, improving economy per edge. The central hole with a matched countersink secures positive clamping and helps transmit cutting forces evenly, which benefits surface finish and repeatability in turning operations. Practical application scenarios and process benefits The insert is conceived for both external and internal turning operations where cast iron is the predominant workpiece material. Selecting this geometry and T5115 grade typically results in stable tool life and consistent surface quality, which supports higher uptime and predictable planning for tool replacements. For workshops seeking a balance of performance and cost-efficiency, this carbide insert provides a reliable baseline that can be paired with appropriate holders and parameter optimisation to increase throughput. For tailored advice on holder compatibility or to secure Tungaloy TCMT110204 T5115 inserts, contact Metav Werkzeuge via info@metav-werkzeuge.com or call +49 2822 7131930 for prompt technical support and ordering assistance Technical data Article number: 6864786 Manufacturer SKU: TUN6864786 SKU: 6864786-Tungaloy Model series: ISO-Drehwendeschneidplatten Label: TCMT110204 T5115 Tungaloy-Wendeplatte Facts Insert designation: TCMT110204 Grade: T5115 Material: carbide Corner radius: 0.4 mm Relief angle: 7° Thickness: 2.38 mm Inscribed circle: 11 mm Geometry angle: 60° Hole: with central hole Countersink: 40°–60° Special features CVD-coated carbide grade T5115 Triangular plate form, single-sided chipbreaker Suitable for external and internal turning Optimised for cast iron machining Central hole with cylindrical seat and one-side countersink ISO-standard indexable insert FAQ Is this insert suitable for cast iron turning? The TCMT110204 T5115 indexable turning insert by Tungaloy is a universal grade optimised for grey cast iron, combining wear resistance and edge stability for reliable performance in cast iron applications. How is compatibility with the tool holder determined? Compatibility depends on form, relief angle, tolerance class, fastening method, size and thickness; matching the TCMT profile and using the correct holder ensures secure clamping and accurate seating for the Tungaloy insert. What does the T5115 grade offer compared with other grades? T5115 is a CVD-coated carbide grade that balances wear resistance and edge stability, making it suited to a wide range of cast iron turning tasks where process stability is important. How many cutting edges are available per insert and how does the hole affect clamping? The triangular form provides three indexed cutting corners, and the central hole with a countersink secures the insert against the seat and distributes clamping forces to maintain positional repeatability during turning. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCMT 110204 T6215 Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide wear resistance, a 0.4 mm corner radius and ISO compatibility for consistent turning results; order original Tungaloy inserts via Metav Werkzeuge or ask the consultants for application support. TCMT 110204 T6215 — ISO turning insert for stable rostfreier Stahl machining (triangular) TCMT110204 T6215 Tungaloy insert is a triangular ISO turning insert designed for external and internal turning, optimised for rostfreier Stahl under stable to slightly interrupted cutting conditions. CVD-coated carbide for high wear resistance Optimised for rostfreier Stahl machining 0.4 mm corner radius with 7° clearance Triangular ISO plate with single-sided chipbreaker Longer tool life through CVD-coated carbide and geometry The CVD coating on this grade delivers improved wear resistance and consistent edge life during extended runs, which reduces tool change frequency and boosts uptime. Combined with the 0.4 mm corner radius and the single-sided chipbreaker, the geometry supports stable chip formation and a predictable cutting force, resulting in a more uniform surface finish on difficult-to-machine materials such as rostfreier Stahl. This engineering focus on material and edge design enables efficient, repeatable performance in medium-duty turning operations. Reliable system compatibility for faster setup and less downtime Designed to the ISO standard, the insert fits a wide range of indexable toolholders where compatibility is defined by shape, clearance angle, tolerance class, clamping and size. The triangular plate with a cylindrical hole and single-sided countersink (40°–60°), a plate thickness of 2.38 mm and a plate size of 11 mm simplifies inventory management and tool changes. The dimensional conformity reduces setup uncertainty and allows for quick replacement, so the manufacturing process remains consistent and predictable. Practical productivity: when to choose this grade and chipbreaker This CVD-coated carbide grade suits turning of rostfreier Stahl under stable to lightly interrupted conditions; the single-sided chipbreaker is appropriate when chip control and surface integrity are priorities. Select the chipbreaker and grade according to workpiece material, machining strategy and machine stability to maximise process reliability and cost-efficiency. For short production runs or mixed batches, the combination of robust coating and ISO form offers a balance between tool life and flexibility that supports higher productivity with fewer interruptions. Contact Metav Werkzeuge to source original Tungaloy TCMT110204 T6215 inserts optimised for rostfreier Stahl machining; Metav Werkzeuge provides tailored product advice and prompt delivery. Technical data Article number: 6876501 SKU: 6876501-Tungaloy Manufacturer SKU: TUN6876501 Model series: ISO-Drehwendeschneidplatten Grade: T6215 Material: Hartmetall Plate designation: TCMT110204 Plate form: triangular Application: Drehen Facts Plate size: 11 Plate thickness: 2.38 mm Corner radius: 0.4 mm Clearance angle: 7° Included angle: 60° Hole style: cylindrical hole + one-sided countersink (40°–60°) Special features CVD-coated carbide Single-sided chipbreaker Suitable for rostfreier Stahl machining ISO-standard plate for wide holder compatibility Stable to slightly interrupted cutting conditions FAQ Which holders are compatible with this insert? The TCMT110204 T6215 insert is ISO-standard triangular form and fits holders specified for TCMT-type plates; compatibility depends on holder form, clearance angle, tolerance class, clamping and plate thickness. Is this grade suitable for stainless steel? Yes, the T6215 grade is a CVD-coated carbide developed for turning rostfreier Stahl under stable to slightly interrupted conditions. What does the single-sided chipbreaker do? A single-sided chipbreaker on this triangular plate improves chip control and supports a consistent surface finish when machining rostfreier Stahl and similar materials. How does the 0.4 mm corner radius affect results? A 0.4 mm corner radius provides a balance between edge strength and finish quality, reducing edge chipping while maintaining acceptable surface integrity in typical turning operations. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCMT 110204 T6215 Wendeplatten - Tungaloy
Take advantage of the CVD-coated carbide in grade T6215 combined with a 60° triangular geometry and 0.4 mm nose radius for consistent, wear-resistant performance in stainless steel turning; order directly via Metav Werkzeuge or consult our specialists for application advice. TCMT 110204 T6215 ISO turning insert — CVD-coated carbide for stainless steel turning by Tungaloy A TCMT110204 T6215 indexable insert designed for external and internal turning of stainless steel under stable to lightly interrupted conditions, compatible with ISO-style toolholders. CVD-coated carbide grade T6215 Optimised for stainless steel machining 60° triangular insert with 0.4 mm nose radius Cylindrical hole with single-sided countersink Reliable wear resistance for consistent production The CVD-coated carbide T6215 delivers high wear resistance, offering extended tool life when machining stainless steel in continuous and lightly interrupted cuts. The indexable insert design reduces downtime for tool changes and supports predictable process behaviour, which contributes to a steady production flow. Compatibility with ISO-standard holders ensures straightforward integration into existing tool systems, while the CVD coating enhances resistance to built-up edge and thermal wear to maintain surface quality over longer runs. Geometry and chip control that improve surface finish The 60° triangular geometry and the 0.4 mm nose radius provide a balance between strength and detail in contouring operations, enabling finer surface finishes on turned components. The one-sided chipbreaker and the combination of a cylindrical hole with a single-sided countersink (40°–60°) guide chip evacuation and clamping stability, reducing vibration and edge chipping. These design elements translate into fewer interruptions for rework and a more consistent part quality on both external and internal turning applications. System benefits and practical application guidance As part of an ISO insert system, selection of a matching holder — determined by form, clearance angle, tolerance class, fastening method, size and thickness — is essential for optimal results. The insert’s carbide substrate and CVD finish make it suitable for demanding stainless steel operations where repeatability and tool life matter. For workshops seeking improved throughput and reliable surface integrity, the combination of indexable insert economics and grade-specific coating technology supports higher productivity and lower per-part tooling cost. Contact Metav Werkzeuge for tailored application advice and ordering of Tungaloy CVD-coated turning inserts; email info@metav-werkzeuge.com or call +49 2822 7131930 for prompt, expert support Technical data Article number: 6876443 SKU: 6876443-Tungaloy Manufacturer SKU: TUN6876443 Model series: ISO-Drehwendeschneidplatten Designation: TCMT110204 T6215 Tungaloy-Wendeplatte Core data Insert size: 11 mm Thickness: 2.38 mm Nose radius: 0.4 mm Clearance angle: 7° Included angle: 60° Special features Material: carbide (Hartmetall) Coating/grade: CVD-coated, T6215 Shape: triangular insert Hole: with cylindrical hole + single-sided countersink (40°–60°) Chip control: one-sided chipbreaker Typical use: external and internal turning of stainless steel Compatibility: ISO-standard toolholders and clamping systems FAQ What materials is this insert suitable for? The TCMT110204 T6215 insert is optimised for stainless steel and performs well in stable to lightly interrupted stainless steel turning operations. How does the T6215 grade improve tool life? The CVD-coated T6215 provides enhanced wear resistance and thermal stability, which reduces flank and crater wear during extended stainless steel machining cycles. Which holder features are critical for correct mounting? Matching the holder by form, clearance angle, tolerance class, fastening and insert thickness is essential to ensure the TCMT110204 seats correctly and delivers consistent cutting performance. Does the insert support internal turning applications? Yes; the triangular 60° geometry and chipbreaker design make the insert suitable for both external and internal turning when paired with the appropriate holder. Can this insert be used for interrupted cuts? The insert is intended for stable to lightly interrupted conditions; heavy interruption may require a different grade or insert geometry. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCMT 110204 T9215 Tungaloy Wendeplatten - Tungaloy
Take advantage of the combination of CVD-coated carbide T9215 for high wear resistance, a 0.4 mm corner radius for consistent surface quality and the ISO compatibility that ensures fast tool changes and repeatable results. Order the insert directly via Metav Werkzeuge or ask our consultants if needed. TCMT 110204 T9215 TCMT indexable turning insert — triangular 60° geometry by Tungaloy The TCMT 110204 T9215 is a triangular ISO indexable insert designed for external and internal turning, tailored for medium-steel machining with a single-sided chipbreaker. CVD-coated carbide grade T9215 for medium steel Triangular 60° geometry for external and internal turning 0.4 mm corner radius for consistent surface finish Cylindrical hole with one-sided countersink for secure clamping Delivering productivity on medium-steel turning The CVD-coated carbide grade T9215 combines high wear resistance with fracture toughness to sustain productive machining in continuous to slightly interrupted cuts. As a rational choice for manufacturing environments, this coating extends tool life and stabilises cutting performance, reducing tool-change frequency and increasing net milling hours. The triangular geometry with a 60° tip supports a range of turning profiles while the single-sided chipbreaker promotes predictable chip formation, which contributes to consistent cycle times and fewer process interruptions. Secure clamping and repeatable accuracy for stable finishes Mechanical stability is crucial for turning operations; the insert’s cylindrical hole with a one-sided countersink (40°–60°) secures the plate against axial and radial forces during cutting. Together with a plate thickness of 2.38 mm and the 0.4 mm corner radius, this results in reliable edge support and reduced vibration, translating into improved surface quality and repeatable dimensional results. The 60° triangular form also enables indexing to fresh cutting edges quickly, supporting uninterrupted production and predictable part quality. System compatibility and application guidance for pragmatic use This ISO indexable insert is supplied in the TCMT 110204 format and integrates into standard ISO toolholder systems when matching form, clearance angle, tolerance class, fastening and plate size. Intended primarily for turning, the insert suits both external and internal operations on medium steel; the single-sided chipbreaker should be selected where stability and chip control are priorities. For best results, pair the insert with a holder that matches the 7° clearance and 60° geometry, and select cutting parameters aligned with continuous or lightly interrupted cuts to exploit the grade’s balanced wear resistance and toughness. For reliable medium-steel turning with Tungaloy’s T9215 grade, contact Metav Werkzeuge for application advice and prompt supply Technical data Article number: 6773992 Manufacturer SKU: TUN6773992 Model series: ISO turning indexable inserts Category: Indexable inserts for turning Core specifications Insert designation: TCMT110204 Grade/coating: T9215 (CVD-coated carbide) Plate size: 11 Plate thickness: 2.38 mm Corner radius: 0.4 mm Clearance angle: 7° Tip angle: 60° Hole style: cylindrical hole + one-sided countersink (40°–60°) Features Material: carbide Plate shape: triangular Chipbreaker: single-sided Application: external and internal turning Typical use: medium steel, continuous to slightly interrupted cuts Compatibility: ISO toolholders (form, clearance, tolerance, fastening, size, thickness) FAQ What materials is this insert designed for? The TCMT 110204 T9215 insert is optimised for medium steel; the T9215 CVD-coated carbide provides wear resistance and toughness suitable for these materials. Can the insert be used for internal turning as well as external turning? Yes, the triangular 60° geometry allows the insert to be used for both external and internal turning operations when mounted in the appropriate ISO holder. How does the hole and countersink design affect clamping? The cylindrical hole with a one-sided countersink (40°–60°) ensures secure and repeatable clamping of the TCMT110204 plate, reducing movement under cutting loads. Which chipbreaker should be selected for unstable conditions? The single-sided chipbreaker included with this grade is intended for stable chip control; for highly interrupted or unstable cuts, consult tooling specialists about alternative breakers or machining strategies. What should be considered when choosing a matching holder? Select a holder that matches the insert form, 7° clearance, tolerance class, fastening method, plate size and thickness to ensure correct seating and performance. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCMT 110204 T9215 Wendeplatten - Tungaloy
Take advantage of the CVD-coated carbide grade T9215 and the ISO-compliant triangular form for reliable, productive steel turning; compatibility with the correct holder ensures secure seating and consistent results. Order the insert directly via Metav Werkzeuge or consult our specialists for application guidance. TCMT 110204 T9215 turning insert for turning — Tungaloy The TCMT110204 T9215 is an ISO triangular indexable insert engineered for external and internal turning in medium steel applications, offering a balance of wear resistance and fracture toughness. CVD-coated carbide for wear resistance Optimised for steel turning operations ISO triangular 11 mm, 60° geometry 0.4 mm nose radius, one-sided chipbreaker High wear resistance that raises throughput The CVD-coated carbide composition of this grade combines a hard, wear-resistant surface with a tough substrate to extend tool life under continuous and lightly interrupted cuts. The T9215 grade is specified for mid-range steel machining and is formulated to deliver stable chip formation and good resistance to flank and crater wear. This results in longer productive tool life, fewer insert changes and a lower cost per component when machining medium-strength steels. The combination of wear resistance and fracture toughness supports higher machining speeds and consistent surface quality in serial production. Designed for reliable seating and simple integration The insert conforms to ISO geometry and is supplied as a triangular 11 mm format with a 60° cutting angle, 2.38 mm thickness and a 7° clearance angle, ensuring compatibility with a broad range of standard holders. The holder compatibility depends on the insert’s form, clearance angle, tolerance class, attachment method, size and thickness; when these parameters match, the insert seats securely for repeatable accuracy. The insert is supplied with a hole (cylindrical hole with a single-sided countersink 40°–60°) to suit many clamping systems. For a complete system, pair the insert with an appropriate external holder or boring bar plus a shim/clamp kit and replacement screws to maintain clamping integrity and minimise downtime. Geometry and chip control for consistent surface finish The 0.4 mm nose radius offers a practical compromise between strength and surface finish, suitable for semi-finishing and general turning tasks. The one-sided chipbreaker is designed to direct and fragment chips reliably in stable setups, reducing the risk of entanglement and facilitating safe chip evacuation. When combined with the T9215 coating and carbide substrate, the insert performs well across continuous to slightly interrupted cuts, giving predictable tool behaviour and repeatable component tolerances. Choose the chipbreaker and grade to match material, feed and component stability for the best balance of productivity and finish. Practical use and selection guidance This insert is intended for turning applications and should be selected as part of a system that includes the correct holder geometry and clamping method. For medium steel, the T9215 grade is a first choice, while adjusting feed, speed and depth of cut according to machine rigidity will optimise tool life. The ISO triangular insert form offers three usable cutting edges when rotated, improving cost efficiency per edge. For best results, check holder compatibility for the 7° clearance angle, 11 mm size and 2.38 mm thickness before assembly; incorrect matching can compromise seating and repeatability. For application advice, availability or to specify the Tungaloy TCMT110204 T9215 insert for a production line, contact Metav Werkzeuge — email info@metav-werkzeuge.com or call +49 2822 7131930 for prompt technical support and supply. Technical data Article number: 6777778 SKU: 6777778-Tungaloy Manufacturer SKU: TUN6777778 Manufacturer article number: 6777778 Designation: TCMT110204 T9215 Tungaloy insert Brand: Tungaloy Model series: ISO turning inserts Application: Turning Core measurements Size: 11 mm Thickness: 2.38 mm Corner radius: 0.4 mm Clearance angle: 7° Insert angle: 60° Countersink angle: 40°–60° Material & features Material: carbide (Hartmetall) Coating: CVD-coated carbide (T9215) Shape: triangular Hole: with hole; cylindrical hole + single-sided countersink (40°–60°) Chipbreaker: one-sided Typical use: external and internal turning; continuous to light interrupted cuts FAQ What materials is this insert best suited for? The TCMT110204 T9215 insert is optimised for medium steel machining; the T9215 CVD coating and carbide substrate provide wear resistance and toughness suitable for this material class. How can I ensure the insert fits my holder? Compatibility is determined by insert form, 7° clearance angle, tolerance class, attachment style, 11 mm size and 2.38 mm thickness; match these parameters with the holder specification to ensure correct seating. Is the insert suitable for interrupted cuts? Yes, the grade is designed for continuous to lightly interrupted cuts; for heavy interruptions consider grades or geometries specified for higher impact resistance. How many cutting edges are usable on the insert? The triangular form provides three indexed cutting edges per insert, improving cost efficiency per edge when rotated correctly. What is the function of the chipbreaker? The one-sided chipbreaker promotes controlled chip fragmentation in stable setups, aiding evacuation and reducing the risk of chip entanglement during turning. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCMT 110204 T9215 Wendeplatten - Tungaloy
Combining CVD-coated carbide wear resistance with a 0.4 mm corner radius and ISO compatibility, this insert delivers productive, repeatable turning performance for medium steel applications; order the TCMT110204 T9215 insert directly via Metav Werkzeuge or ask our consultants if needed. TCMT 110204 T9215 turning insert, triangle 60° – Tungaloy A TCMT110204 T9215 ISO-format indexable insert for external and internal turning, optimised for medium steel and designed for continuous to light interrupted cuts. CVD-coated carbide for long tool life 60° triangle for robust turning edges 0.4 mm corner radius for fine surface finish Single-sided chipbreaker for controlled chips Reliable productivity for medium steel machining The CVD-coated carbide grade T9215 combines high wear resistance with fracture toughness to sustain productive turning in medium steels. The coating reduces flank wear under continuous cutting, while the substrate toughness resists chipping during light interruptions. As a result, the insert supports longer tool life and fewer tool changes, which translates into improved shop-floor uptime and a better cost per part. The geometry and coating selection are particularly suited to stable setups where consistent removal rates are required. Geometry and edge preparation for consistent finishes With a 60° triangular shape and a 0.4 mm corner radius, this insert offers a balance between strength and surface quality. The included 7° clearance creates a reliable cutting angle that minimises rubbing and heat build-up, while the modest corner radius helps achieve improved surface integrity without compromising edge strength. The single-sided chipbreaker is engineered for predictable chip formation, easing evacuation and reducing the risk of surface marks on turned components. Compatibility and practical workshop handling The insert conforms to ISO dimensions and is supplied with a cylindrical hole and a single-sided countersink (40°–60°) for secure clamping in compatible holders or boring bars. The standardised form, thickness and fixing arrangement ensure interchangeability across commonly used external holders, enabling quick replacement without special adapters. Clear identification by ISO code and the Tungaloy grade simplifies stock management and makes integration into existing tool assemblies straightforward. For technical selection and orders contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930; our specialists will advise on the TCMT110204 T9215 insert and its best application in turning operations Technical data Article number: 6774045 Manufacturer SKU: TUN6774045 Model series: ISO turning indexable inserts Material: carbide Grade/coating: T9215 (CVD-coated) Numbers / Core specifications Insert designation: 110204 Included angle: 60° Corner radius: 0.4 mm Clearance angle: 7° Inscribed circle / size: 11 mm Plate thickness: 2.38 mm Designs / Special features Triangular plate form Single-sided chipbreaker With hole: cylindrical hole + one-sided countersink (40°–60°) Intended application: turning (external and internal) Suitable material focus: medium steel ISO-standardised dimensions for holder compatibility FAQ What materials is this insert best suited for? The TCMT110204 T9215 insert is optimised for medium steel; the T9215 CVD-coated carbide blends wear resistance and toughness for productive steel turning. Can this insert be used for light interrupted cuts? Yes, the fracture-resistant carbide substrate and robust edge geometry make the insert suitable for continuous to light interrupted cuts in stable setups. Which holders are compatible with this ISO insert? Holders that accept ISO triangular inserts with matching form, thickness, fixing and tolerance class are compatible; the insert’s cylindrical hole and countersink ensure secure clamping. How does the chipbreaker affect machining? The single-sided chipbreaker promotes controlled chip formation and evacuation, reducing the risk of surface damage and improving process reliability. Is the TCMT110204 available as a stocked item? Stocking and availability information can be obtained from Metav Werkzeuge; specify article number 6774045 when enquiring. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCMT 110204 T9215 Wendeplatten - Tungaloy
Combine high wear resistance and stable edge life with precise geometry for reliable medium‑steel turning; benefit from predictable chip control and long tool life. Order the insert directly via Metav Werkzeuge or consult our specialists for selection and availability. TCMT 110204 T9215 triangular ISO turning insert – CVD‑coated carbide, 60° | Tungaloy TCMT 110204 T9215 is an ISO‑standard triangular indexable insert designed for external and internal turning operations on medium steels with continuous to light interrupted cuts. CVD‑coated carbide for high wear resistance Optimised for medium steel machining 60° triangular insert with 0.4 mm corner radius Cylindrical hole with one‑sided countersink (40°–60°) Consistent cutting performance for medium steels The CVD‑coated grade T9215 combines carbide substrate strength with a protective chemical vapour deposition layer to deliver high wear resistance and reliable edge integrity. This makes the insert particularly effective for continuous to light interrupted cuts, where steady chip formation and predictable flank wear are essential to maintain cycle times and surface quality. As part of an ISO‑standard series, the geometry is engineered to balance hardness and fracture resistance, supporting higher productivity without excessive tool change frequency. Precision geometry that aids secure clamping and chip control A well‑defined geometry is decisive for repeatability and clamping stability: the insert features a 60° included angle and a 0.4 mm corner radius, with a 7° relief angle to reduce rubbing and heat build‑up. The triangular form and the cylindrical hole with a one‑sided countersink ensure secure seating in compatible holders and correct axial positioning. The one‑sided chipbreaker is tailored for chip control in typical steel turning tasks, reducing the risk of long, tangled chips and improving process safety. Compatibility with a toolholder depends on form, relief, tolerance class, clamp method, size and thickness. Practical system guidance and application benefits The insert is intended to be used within a complete system: ISO turning insert, an appropriate external holder or boring bar, a support pad or clamp set, and correct fastening screws. Selecting the chipbreaker and the grade T9215 according to workpiece material and machining stability reduces vibration and extends edge life, which in turn decreases downtime and improves overall cost per part. For shops seeking consistent surface finish and predictable tool changes, this geometry and coating combination offers a reliable solution that is simple to integrate into existing ISO‑compliant toolholders. For proven mid‑steel turning performance with Tungaloy’s CVD‑coated grade, contact Metav Werkzeuge for technical advice or availability at info@metav-werkzeuge.com or call +49 2822 7131930. Technical data Article number: 6774063-Tungaloy Manufacturer SKU: TUN6774063 Manufacturer article number: 6774063 Insert designation: TCMT110204 Facts Corner radius: 0.4 mm Included angle: 60° Clearance angle: 7° Thickness: 2.38 mm Size: 11 mm Special features Material: carbide Grade: T9215 (CVD‑coated) Insert form: triangular Hole: cylindrical hole with one‑sided countersink (40°–60°) Chipbreaker: one‑sided Application: turning Model series: ISO turning insert series FAQ Which materials is this insert best suited for? The TCMT 110204 T9215 Tungaloy turning insert is optimised for medium‑strength steels and performs well in continuous to light interrupted cuts thanks to the CVD‑coated carbide grade T9215. How is holder compatibility determined for this insert? Compatibility depends on insert form, relief angle, tolerance class, attachment method, size and thickness; the TCMT110204 conforms to common ISO triangular insert standards and fits appropriate ISO‑type external holders and boring bars. What does the grade T9215 signify in practice? T9215 denotes a CVD‑coated carbide composition that balances wear resistance and fracture toughness, aiming for productive machining of steel with good edge life and consistent performance. What are the key geometry specifications to consider? Notable specs include the 60° included angle, 0.4 mm corner radius, 7° clearance angle, 2.38 mm thickness and the cylindrical hole with a one‑sided countersink; these determine clamping, cutting behaviour and chip formation. Is the insert suitable for interrupted cutting conditions? The insert is designed for continuous to light interrupted cuts; for heavy interruptions a different grade or geometry may be preferable. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
TCMT 110204 T9215 Wendeplatten - Tungaloy
Take advantage of high wear resistance and breakage safety combined with an ISO‑standardised triangular geometry for stable, productive turning operations; order the insert directly via Metav Werkzeuge or consult the team for cutting data and availability. TCMT 110204 T9215 turning insert — triangular 60° geometry by Tungaloy TCMT110204 T9215 is a triangular ISO turning insert optimised for medium steel machining, featuring a CVD-coated cemented carbide grade and a single‑side chipbreaker for continuous to lightly interrupted cuts. CVD-coated cemented carbide T9215 Optimised for medium steel turning 60° triangular geometry, 0.4 mm radius Cylindrical hole with single-side countersink Productivity and wear performance for medium steel turning The T9215 grade combines a CVD coating with a tough cemented carbide substrate to deliver a balance of wear resistance and breakage toughness that supports higher machining rates under continuous and mildly interrupted cuts. This material pairing reduces flank and crater wear, which extends effective tool life and lowers the frequency of insert changes. As a result, cycle times become more predictable and process stability improves, supporting leaner production flows and consistent component quality. Geometry and mounting: how design improves process reliability The triangular 60° geometry with a 0.4 mm corner radius and a plate thickness of 2.38 mm provides a robust cutting edge for roughing and finishing passes where edge strength is required. The insert’s cylindrical hole with single‑side countersink (40°–60°) enables secure clamping in ISO‑compatible holders; compatibility depends on holder form, 7° clearance angle, tolerance class, clamping method, size and thickness. The single‑side chipbreaker supports controlled chip formation for medium steels, improving evacuation and reducing the risk of chip entanglement on longer runs. System integration and application guidance As part of the ISO turning insert system, the TCMT geometry integrates with matching external holders, backing pads and clamping sets to complete the cutting assembly; select the chipbreaker and grade according to workpiece material and machining stability. The insert is intended primarily for turning and is a practical first choice for middle‑range steel grades where a combination of productivity and tool life is required. For applications beyond continuous cuts, brief interruptions are tolerated, but cutting parameters and fixture rigidity should be validated to preserve the insert’s performance. Contact Metav Werkzeuge for availability, recommended cutting data and application matching: info@metav-werkzeuge.com | +49 2822 7131930 Technical data Manufacturer article number: 6772466 SKU: 6772466-Tungaloy Manufacturer SKU: TUN6772466 Name: TCMT110204 T9215 Tungaloy insert Core technical data Included angle: 60° Corner radius: 0.4 mm Plate thickness: 2.38 mm Plate size: 11 Special features CVD-coated cemented carbide (T9215) Triangular plate form Single-sided chipbreaker Cylindrical hole with single-side countersink (40°–60°) Application: Turning Model series: ISO turning inserts Compatibility depends on form, clearance angle, tolerance, clamping, size, thickness FAQ Which materials is this grade suited for? The T9215 grade is designed as a first choice for medium steel machining; the TCMT110204 insert performs well in continuous to lightly interrupted turning operations on typical steel grades. What are the insert’s key geometric properties? The insert offers a 60° included angle, a 0.4 mm corner radius and a 2.38 mm plate thickness, combined with a triangular form and a single‑side chipbreaker for stable edge strength and predictable chip control. How is holder compatibility ensured? Compatibility for the TCMT110204 insert is determined by the holder’s form, 7° clearance angle, tolerance class, clamping method, size and thickness; confirm the holder corresponds to ISO specifications and the insert’s mounting style. Does the insert have a coating and what benefit does it bring? Yes — the TCMT110204 is supplied in T9215 CVD-coated cemented carbide, where the coating increases wear resistance and the carbide core provides breakage toughness, together improving tool life and process reliability. How is the insert secured in the cutter body? Retention is achieved via the cylindrical hole with single‑side countersink (40°–60°), which enables secure clamping in ISO-compatible holders and ensures repeatable seating during index changes. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCMT 110204 T9215 Wendeplatten - Tungaloy
The combination of CVD-coated carbide (T9215) and a 60° triangular geometry with a 0.4 mm nose radius provides a balanced mix of wear resistance and fracture toughness for productive medium‑steel turning. The TCMT110204 designation ensures ISO conformity and predictable holder compatibility; order the insert via Metav Werkzeuge or consult our application specialists for optimal tool selection. TCMT 110204 T9215 turning insert for turning — Tungaloy A TCMT 110204 insert in grade T9215, designed for general external and internal turning in medium‑strength steel, delivering high productivity with reliable edge stability. CVD-coated carbide grade T9215 Optimised for medium steel productivity 60° triangular geometry, 0.4 mm radius Cylindrical hole with single-side countersink High productivity for medium‑steel turning The CVD-coated carbide construction in grade T9215 is formulated to combine wear resistance with sufficient fracture toughness, making it well suited to continuous and lightly interrupted turning operations in medium steel. The plate’s geometry supports stable cutting at higher material removal rates, so process time is reduced and tool changes become less frequent. By selecting this geometry and grade, shops benefit from longer effective edge life and more consistent surface finish in production runs, yielding tangible productivity gains. Secure clamping and repeatable accuracy The 60° triangular geometry and cylindrical hole with single‑side countersink (40°–60°) ensure positive, repeatable seating in compatible holders. A 7° relief angle reduces rubbing while maintaining axial and radial stability during cut engagement. The result is improved tool life through reduced vibration and a lower risk of catastrophic edge failure. Compatibility with ISO‑standard holders is determined by form, relief angle, tolerance class, fastening and thickness, providing predictable assembly and repeatable part quality. Coating and grade engineered for longevity The CVD coating applied to the T9215 grade adds a hard, wear‑resistant surface that tolerates elevated cutting temperatures and abrasive wear without sacrificing edge toughness. In practice, this means fewer unplanned tool swaps and more continuous production time. For operations where balance between surface quality and cutting economy is required, the combination of coating and carbide substrate offers a robust foundation for higher feeds and speeds while maintaining acceptable flank wear progression. System compatibility and recommended use As an ISO turning insert, the plate is part of a system that includes a matching external holder, shim/clamping kit and replacement screws. Key dimensions—11 inscribed size, 2.38 mm thickness and a 0.4 mm nose radius—make the insert versatile for general turning and light profile work. Typical applications are external and internal turning where medium cutting forces and regular chip control are expected; select the appropriate single‑side chipbreaker and holder rigidity to match workpiece stability and machining strategy for best results. For reliable medium‑steel turning with a proven Tungaloy solution, contact Metav Werkzeuge for technical advice and order placement — Metav Werkzeuge is available at info@metav-werkzeuge.com or by phone on +49 2822 7131930. Technical Data Article number: 6773965 Manufacturer SKU: TUN6773965 SKU: 6773965-Tungaloy Designation: TCMT110204 Model series: ISO turning indexable inserts Manufacturer: Tungaloy Application: Turning Numbers / Core Technical Data ISO code: 110204 Size: 11 Thickness: 2.38 mm Relief angle: 7° Nose radius: 0.4 mm Included angle: 60° Manufacturer item no.: 6773965 Designs / Special Features Material: carbide (cemented carbide) Coating/type: CVD-coated carbide Grade: T9215 Plate form: triangular Hole: with cylindrical hole and single-side countersink (40°–60°) Chipbreaker: single-side Typical system: ISO insert + matching holder, shim/clamping kit and replacement screws FAQ What materials is this insert intended for? The TCMT110204 in grade T9215 is intended primarily for medium steel machining and offers a balance of wear resistance and toughness suitable for continuous to light interrupted cuts. Which operations suit this triangular insert? The triangular form and 0.4 mm nose radius make the insert suited to both external and internal turning where moderate profile detail and general turning are required. How does the insert sit in the holder? The cylindrical hole with single‑side countersink provides secure seating and repeatable clamping when used with holders compatible with ISO 110204 geometry and the specified 7° relief. What advantages does the T9215 grade offer? Grade T9215 combines a CVD coating with a carbide substrate to deliver wear resistance for productivity while maintaining sufficient fracture toughness for stable performance in medium‑steel applications. Which replacement parts are needed for a complete system? A complete system typically includes the ISO insert, a matching external holder or boring bar, a shim or clamping kit and the correct replacement screws for secure fastening Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCMT 110204 T9215 Wendeplatten - Tungaloy
Take advantage of the CVD-coated carbide T9215 for durable, high-productivity turning together with the precise 0.4 mm corner radius and standard TCMT form; order the TCMT110204 directly via Metav Werkzeuge or ask our consultants for tailored cutting data. TCMT 110204 T9215 Tungaloy indexable insert for turning — ISO turning insert, CVD-coated carbide, 0.4 mm radius A TCMT110204 T9215 indexable insert engineered for external and internal turning in medium steel, offering a CVD-coated carbide grade optimised for continuous to slightly interrupted cuts. CVD-coated carbide T9215 0.4 mm corner radius Triangular ISO TCMT 110204 form Compatible with countersunk-hole clamping Consistent productivity and wear resistance for medium steel The CVD-coated carbide grade T9215 combines wear resistance with fracture toughness to sustain higher metal removal rates in typical steel turning applications. The coating reduces flank wear and improves tool life, which lowers interruption frequency in production cycles and contributes to more predictable process costs. The result is a machining solution that supports sustained throughput while maintaining dimensional consistency on components, making it suitable for workshops and production lines aiming for reliable output. Secure fit and straightforward tool pairing for stable results The triangular ISO TCMT 110204 form and the cylindrical hole with one-sided countersink (40°–60°) permit secure clamping in standard external holders and boring bars. With a plate thickness of 2.38 mm and nominal size 11, the insert matches common holder geometries; compatibility is determined by form, clearance angle, tolerance and fastening. The 7° clearance angle and the insert geometry deliver repeatable seating and simple replacement, which reduces downtime during index changes and ensures consistent cutting positions across repeated cycles. Better surface finish and controlled chip formation The single-sided chipbreaker and the 0.4 mm corner radius support a balance between strength at the cutting edge and surface integrity. In continuous to lightly interrupted cuts the chipformer helps to control chip shape and evacuation, improving surface quality and reducing the risk of built-up edge. This combination of geometry and the T9215 grade supports higher feed rates where appropriate, enabling better machining economy without compromising part finish. Practical selection advice for predictable tool life Select the chipbreaker and grade according to workpiece material, cut stability and the nature of the operation: for medium steel, T9215 is the first choice for a blend of wear resistance and toughness. The CVD coating adds thermal and abrasive protection; in less stable set-ups or deeper cuts, favour slightly larger corner radii and conservative feeds to preserve edge integrity. When integrating into a tool system, confirm holder compatibility by matching form, thickness and hole style to the insert specifications to achieve repeatable, safe clamping and the expected service life. For high-productivity turning with Tungaloy’s T9215 grade, contact Metav Werkzeuge for cutting data, holder recommendations and ordering assistance via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6777819 Manufacturer SKU: TUN6777819 Manufacturer: Tungaloy Model series: ISO turning indexable inserts Material: carbide Facts ISO code: 110204 Size: 11 mm Thickness: 2.38 mm Corner radius: 0.4 mm Clearance angle: 7° Included angle: 60° Special features Grade T9215, CVD-coated carbide Triangular TCMT form Cylindrical hole + one-sided countersink (40°–60°) Single-sided chipbreaker Suitable for external and internal turning Optimised for medium steel, continuous to lightly interrupted cuts Compatible with standard TCMT holders FAQ What materials is this insert best suited for? The insert is optimised for medium steel applications; the T9215 grade delivers a balance of wear resistance and toughness for productive turning operations. How does the CVD coating affect performance? The CVD-coated carbide surface increases thermal and abrasive resistance, extending tool life and helping to maintain surface finish under continuous cutting conditions. Which holder features must match the insert? Compatibility requires matching the insert form, clearance angle (7°), tolerance class, fastening method, size and thickness (2.38 mm) to the holder or boring bar. What is the purpose of the 0.4 mm corner radius? A 0.4 mm corner radius offers a compromise between edge strength and surface finish, suitable for general turning where improved edge robustness is needed without excessive cutting forces. Can this insert be used for interrupted cuts? Yes; the T9215 grade and chipformer are suitable for continuous to lightly interrupted cuts, though heavily interrupted machining may require a tougher geometry or different grade. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCMT 110204 T9225 Wendeplatten - Tungaloy
Take advantage of the combination of a CVD-coated cemented carbide grade and ISO conformity to secure high productivity and consistent tool life in medium to heavy steel turning; order the insert directly via Metav Werkzeuge or ask the consultants for application advice. TCMT 110204 T9225 turning insert (ISO) — Tungaloy TCMT110204 T9225 is an ISO triangular indexable insert engineered for robust medium to heavy turning applications, offering a universal grade tailored to changing engagement conditions. ISO triangular insert TCMT 110204 CVD-coated carbide grade T9225 Robust universal grade for steel turning 7° relief, 60° insert angle, hole and countersink Durable coating and substrate for extended tool life The combination of a CVD coating with a cemented carbide substrate in the T9225 grade delivers a balanced mix of wear resistance and toughness, which benefits continuous production runs and slightly interrupted cuts. This configuration reduces flank wear under varying cutting conditions and helps maintain consistent dimensional accuracy over longer tool lives. The result is fewer insert changes, reduced machine downtime and improved process stability when machining steel components. ISO conformity and mechanical compatibility with holders As an ISO-standard insert in the TCMT form, compatibility with the toolholder is determined by form, 7° relief, tolerance class, fastening method, size and thickness. The insert features a triangular form, an included angle of 60°, an insert thickness of 2.38 mm and a 0.4 mm corner radius, together with a central hole and a one-sided countersink (40°–60°). These defined dimensions enable secure clamping, predictable seating and repeatable geometry, making the insert suitable for both external and internal turning operations when paired with an appropriate holder and clamping set. Process reliability and recommended applications The T9225 grade is a robust universal choice for medium to heavy steel turning where occasional interruptions or variable engagement demand additional toughness. Specify a matching single-sided chipbreaker for effective chip control in axial and radial cuts, and select cutting parameters in line with the holder rigidity and workpiece material. The insert forms part of a system comprising the insert, an appropriate external holder or boring bar, a shim/clamping set and replacement screws, which together determine achievable surface finish and cycle times. For optimised performance, pair the insert with holders designed for the TCMT geometry and consult cutting data sheets for recommended speeds and feeds. Contact Metav Werkzeuge for original Tungaloy inserts and tailored application advice at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6781311 Manufacturer SKU: TUN6781311 SKU: 6781311-Tungaloy Core specifications Insert designation: TCMT110204 Grade/coating: T9225 (CVD-coated) Thickness: 2.38 mm Insert size: 11 mm Relief angle: 7° Included angle: 60° Corner radius: 0.4 mm Design & features Triangular form, ISO turning insert series Cemented carbide substrate Single-sided chipbreaker Central hole with cylindrical bore and one-sided countersink (40°–60°) Application: turning (external and internal) Robust universal grade for medium to heavy steel machining FAQ What materials is this insert suitable for? The TCMT110204 T9225 insert is designed primarily for steel turning, with the T9225 grade offering the toughness required for medium to heavy machining and slightly interrupted cuts. Can the insert be used for internal and external turning? Yes. The insert’s ISO triangular form and specifications make it suitable for both external and internal turning when used with the correct holder, shim and clamping set. What does the T9225 designation mean for performance? T9225 identifies a CVD-coated cemented carbide grade that balances wear resistance and toughness, providing reliable tool life and stable chip behaviour across a broad range of steel applications. How does the insert secure to the holder? Compatibility depends on holder geometry, tolerance class and fastening method; the TCMT110204 features a central hole and one-sided countersink for positive location and clamping with standard clamping screws. Is this insert appropriate for interrupted cuts? Yes. The robust nature of the T9225 grade and the carbide substrate provide enhanced resistance to chipping during moderately interrupted cutting conditions. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCMT 110204 T9225 Wendeplatten - Tungaloy
Benefit from the combination of robust, CVD‑coated carbide and ISO conformity for predictable performance in medium to heavy steel turning; the 60° triangular geometry and 0.4 mm corner radius deliver a reliable balance of strength and finish. Order the TCMT 110204 T9225 turning insert directly via Metav Werkzeuge or consult our specialists for machining recommendations. TCMT 110204 T9225 TCMT turning insert by Tungaloy — 60° triangular, CVD‑coated carbide The TCMT 110204 T9225 is an ISO‑standard triangular turning insert designed for external and internal turning operations, offering a 60° included angle and robust CVD‑coated carbide for consistent chip control. ISO triangular insert, 60° geometry CVD‑coated carbide grade T9225 0.4 mm corner radius for versatile turning With central hole and single‑side countersink Reliable cutting performance for medium to heavy steel machining The combination of CVD‑coated surface and T9225 carbide delivers increased wear resistance while retaining essential toughness for interrupted cuts. This universal grade is optimised for mid to heavy duty steel turning where changing engagement conditions demand resilience; the coating reduces adhesion and prolongs edge life, while the substrate ensures edge stability under load. The result is predictable cycle times and improved tool‑life economics when machining steels with varying hardness. Designed for secure mounting and system compatibility As an ISO insert, the form, relief angle, tolerance class, fastening method, size and thickness determine holder compatibility. The triangular shape with a central hole and a single‑side countersink (40°–60°) allows secure clamping in standard external holders or boring bars. The 2.38 mm thickness and 11 mm size contribute to mechanical stability, reducing vibration and enabling consistent finishes. When assembling, match the insert to the appropriate shim and clamping set and retain spare screws as part of the system to maintain uptime. Practical application benefits and process reliability With a 0.4 mm corner radius and single‑side chipbreaker, the insert supports a range of operations from light finishing to more aggressive passes, depending on feed and depth of cut. The 60° geometry provides access for internal turning and offers good edge strength for external profiles. Using this indexable solution minimises tool change time through positive indexing and replacement, enhancing throughput. The reliable construction of the insert instils confidence in repetitive production runs and contributes to a stable machining process. Contact Metav Werkzeuge for tailored advice on Tungaloy TCMT 110204 T9225 inserts — Metav Werkzeuge can supply compatible holders, clamping kits and application support to optimise machining results; eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical Data Article number: 6781064 Manufacturer SKU: TUN6781064 SKU: 6781064-Tungaloy Model series: ISO turning indexable inserts Material: carbide Facts Included angle: 60° Corner radius: 0.4 mm Relief angle: 7° Thickness: 2.38 mm Size: 11 Special features ISO designation TCMT110204 Grade: T9225, CVD‑coated carbide Triangular insert, three cutting edges Single‑side chipbreaker Central cylindrical hole with one‑side countersink (40°–60°) Intended use: external and internal turning System components: insert, compatible holder/boring bar, shim/clamping set, spare screws Robust universal grade for medium to heavy steel machining FAQ What materials is this insert suitable for? The TCMT 110204 T9225 insert is specified as a universal grade for medium to heavy steel machining, offering toughness for interrupted cuts and good wear resistance thanks to its CVD coating. How does the chipbreaker affect cutting? The single‑side chipbreaker on this insert promotes controlled chip formation in turning operations; when paired with the T9225 grade it improves chip evacuation and reduces built‑up edge in steel turning. Which holders are compatible with this ISO insert? Compatibility depends on holder form, relief angle, tolerance class, fastening, size and thickness; the TCMT110204 format fits standard triangular ISO external holders and suitable boring bars with matching clamping arrangements. Can the insert be used for internal turning as well? Yes — the 60° triangular geometry and compact thickness allow the insert to be used for both external and internal turning when installed in an appropriate holder. What advantages does the CVD coating provide? The CVD‑coated carbide improves wear resistance and reduces adhesion on the cutting edge, increasing tool life and maintaining surface finish consistency during steel machining. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCMT 110204 T9225 Wendeplatten - Tungaloy
Benefit from the CVD-coated carbide T9225 and the ISO TCMT110204 triangular form for stable, efficient turning in medium to heavy steel operations; order via Metav Werkzeuge or contact consultants for machining recommendations. TCMT 110204 T9225 turning indexable insert by Tungaloy — triangular 60° geometry, CVD-coated carbide TCMT110204 T9225 Tungaloy indexable insert for ISO-compatible turning applications, designed for reliable performance in external and internal turning where medium to heavy steel removal and interrupted cuts require enhanced toughness. CVD-coated carbide grade T9225 ISO TCMT 110204 triangle insert, 60° angle Robust universal grade for medium to heavy steel Corner radius 0.4 mm and single-sided chipbreaker Cylindrical hole with 40°–60° countersink Consistent productivity from a tough coating and grade The combination of a CVD-coated surface and the T9225 carbide grade delivers a balance of wear resistance and toughness that is beneficial when machining medium to heavy steel. The coating reduces flank wear and supports longer tool life under variable engagement, while the substrate provides the fracture resistance required for slightly interrupted cuts. For production environments, this reduces the frequency of insert changes and helps maintain cycle times without sacrificing dimensional stability. The result is predictable performance and a measurable improvement in process reliability. Geometry and edge design for stable cutting and repeatable results The triangular insert geometry with a 60° included angle and a corner radius 0.4 mm provides a strong cutting edge that resists chipping in demanding turning operations. The 7° clearance helps to control contact with the workpiece while the 2.38 mm plate thickness adds rigidity at the clamping point. A single-sided chipbreaker optimises chip formation for the intended steel applications, improving surface finish and reducing the risk of built-up edge. These features together enable consistent dimensional results and fewer interruptions for tool rework. Easy integration into ISO tooling systems and workholding Designed as an ISO-standard turning insert, compatibility with holders depends on form, clearance angle, tolerance class, fastening and thickness; this insert fits common external holders and boring bars when specifications match. Typical system assembly comprises the insert, a suitable external holder or boring bar, a shim/clamp set and replacement screws. The central cylindrical hole with a 40°–60° countersink ensures secure, repeatable clamping and straightforward indexing, which simplifies tool-change procedures and minimises setup time on the shop floor. Practical advantages in daily workshop use and material selection This insert is a robust universal choice where cutting conditions vary or light interruptions occur; selecting the appropriate chipbreaker and grade for the workpiece and machine stability optimises results. Matching the insert to the holder and machining parameters enhances surface quality and reduces unplanned downtime. For customers seeking predictable tool life and consistent performance in steel turning, this solution supports higher uptime and steady component quality while keeping inventory management straightforward through ISO conformity. For application advice or to procure Tungaloy indexable inserts with grade T9225, contact Metav Werkzeuge for tailored recommendations and ordering: info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6781171 SKU: 6781171-Tungaloy Manufacturer SKU: TUN6781171 Facts Shape: triangular Designation: TCMT110204 Thickness: 2.38 mm Size: 11 mm Corner radius: 0.4 mm Clearance angle: 7° Included angle: 60° Special features Carbide substrate, CVD coating Grade: T9225 (robust universal for steel) Chipbreaker: single-sided Hole style: cylindrical hole with one-sided countersink (40°–60°) Intended application: external and internal turning Model series: ISO turning indexable inserts FAQ Which materials are best machined with this insert? This TCMT110204 T9225 indexable insert is intended primarily for medium to heavy steel turning; the T9225 grade and chipbreaker suit variable engagement and slightly interrupted cuts in steel workpieces. How is the insert secured in a holder? The insert uses a central cylindrical hole with a countersink and clamps to ISO-compatible holders or boring bars; ensure the holder matches the insert form, thickness and tolerance class for secure clamping of the Tungaloy insert (SKU 6781171-Tungaloy). What benefits does the T9225 grade provide? Tungaloy’s T9225 grade offers a balance of wear resistance and toughness, improving tool life and stability under changing cutting conditions, which helps maintain surface finish and reduces unexpected tool failure. Can this insert be used for interrupted cuts? Yes; the robust carbide grade and geometry make this indexable insert suitable for light to moderate interrupted cuts when matched with appropriate machining parameters and holder stability. What should be checked before installation? Confirm holder compatibility by checking form, clearance angle, fastening method, plate size and thickness; correct seating and torque of the clamp ensure repeatable performance of the TCMT110204 insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCMT 110204 T9225 Wendeplatten - Tungaloy
Take advantage of the combination of robust cutting performance and versatile compatibility for reliable turning operations; the CVD-coated T9225 grade and 0.4 mm corner radius deliver a balance of toughness and edge security. Order through Metav Werkzeuge or contact the consultants for application guidance. TCMT110204 T9225 indexable turning insert — Turning, Tungaloy A TCMT110204 T9225 indexable insert designed for external and internal turning, offering a universal, tough grade for medium to heavy steel machining. CVD-coated carbide grade T9225 For medium to heavy steel turning Triangular insert, 60° cutting geometry 0.4 mm corner radius, single-sided chipbreaker Reliable performance for medium to heavy steel turning The insert delivers consistent cutting behaviour thanks to the CVD-coated T9225 carbide matrix, which combines wear resistance with enhanced toughness. This balance reduces edge chipping during interrupted cuts and variable engagement, so stable material removal is maintained across a range of turning tasks. The design suits applications where repeatable performance and predictable tool life are essential for production planning. Geometry and dimensions that support precision and strength With a nominal cutting angle of 60°, a clearance of 7°, and a corner radius of 0.4 mm, the geometry is optimised for turning operations that require a compromise between strength and finish. The insert thickness of 2.38 mm and the size designation 11 provide a solid contact area in the pocket, improving rigidity under load. The triangular shape combines three usable edges per index, increasing cost efficiency while maintaining cutting stability. Built for easy integration in ISO turning systems Compatibility is determined by insert form, clearance angle, tolerance class, fastening method, size and thickness; the insert features a cylindrical hole with single-sided countersink (40°–60°) which ensures reliable clamping in compatible holders. The single-sided chipbreaker is tailored to produce manageable chips in steel machining, reducing chip control issues and promoting uninterrupted cycles. The component is intended for integration with standard ISO external holders or boring bars within an indexed tool system. Productivity advantages and selection guidance Choosing this universal grade and chipbreaker combination helps to reduce tooling complexity in workshops that face mixed turning operations. The T9225 grade is particularly effective where changing cutting conditions demand toughness over maximum hardness, enabling longer edge life under variable loads. For new setups, select a holder and clamping set that match the insert's 2.38 mm thickness and size 11 to ensure correct seating and repeatable results. For application-specific recommendations on Tungaloy turning inserts and immediate availability, contact Metav Werkzeuge GmbH at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitability and lead times Technical Data Manufacturer article number: 6781488 SKU: 6781488-Tungaloy Manufacturer SKU: TUN6781488 Brand: Tungaloy Model series: ISO-Drehwendeschneidplatten Material: Hartmetall Facts Corner radius: 0.4 mm Relief/clearance angle: 7° Included angle: 60° Plate thickness: 2.38 mm Plate size: 11 Special features Grade/coating: T9225, CVD-coated carbide Plate shape: triangular Hole style: cylindrical hole + single-sided countersink (40°–60°) Chipbreaker: single-sided Typical application: external and internal turning Compatibility criteria: form, clearance angle, tolerance class, fastening, size, thickness FAQ What materials is this insert intended for? The TCMT110204 T9225 insert is intended primarily for steel machining, offering robustness for medium to heavy turning tasks. How is the insert clamped in a holder? The insert uses a cylindrical hole with a single-sided countersink (40°–60°) and must be mounted in a compatible ISO holder matching the insert's form, size 11 and 2.38 mm thickness. Can the insert handle interrupted cuts? Yes, the CVD-coated T9225 grade is formulated for increased toughness, making the insert suitable for interrupted and variable engagement conditions common in turning. How many cutting edges are available per insert? The triangular geometry provides three indexable edges, enabling economical use of the insert before replacement. Which chip control behaviour is expected? The single-sided chipbreaker is designed to produce controllable chips in steel turning, improving evacuation and process stability. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCMT 110204 T9225 Wendeplatten - Tungaloy
Take advantage of the robust CVD-coated carbide and compact triangular geometry for consistent, economical turning results; order the insert directly via Metav Werkzeuge or consult our technical team for application support. TCMT 110204 T9225 – TCMT indexable insert for turning | Tungaloy The TCMT110204 T9225 Tungaloy insert is an ISO triangular indexable insert designed for medium-to-heavy steel turning with a resilient chipbreaker for intermittent cuts. ISO triangular insert, 60° included angle CVD-coated carbide grade T9225 7° relief angle for reduced rubbing Cylindrical hole with single-sided countersink Reliable performance under variable cutting conditions The combination of a CVD-coated surface and a wear-resistant carbide substrate offers reliable tool life in changing machining conditions. The chosen grade is engineered as a universal, robust solution for medium-to-heavy steel turning where interrupted cuts or varying engagement demand additional toughness. This results in stable chip formation and less frequent insert changes, supporting higher productivity and predictable cycle times on lathes and turning centres. Geometry engineered for strength and surface consistency A triangular shape with a 60° included angle and a 0.4 mm corner radius provides a strong cutting edge while maintaining acceptable surface quality on external and internal turning. The 7° relief angle reduces flank contact and rubbing during operation, lowering heat build-up and cutting forces. With a plate thickness of 2.38 mm, the insert offers the rigidity required for repeatable cutting performance and improved dimensional stability of workpieces. System compatibility and secure clamping for repeatable set-up Manufactured to ISO standards, the insert is compatible with holders that match in form, clearance, tolerance class, fixing and size. The central cylindrical hole with a single-sided countersink (40°–60°) ensures secure clamping and easy indexability when used with the correct external holder, underlay/clamp set and replacement screws. The ISO-system approach simplifies tool inventory management and speeds up changeover in production environments. Practical guidance for selection and application Select a matching chipbreaker and the T9225 grade when machining steels with moderate to heavy cutting requirements or when occasional interruptions occur. The single-sided chipbreaker suits stable turning operations and facilitates predictable chip control. For best results, combine the insert with a holder rated for the intended feed and depth—this improves edge life and reduces the risk of workpiece damage while keeping running costs economical. Contact Metav Werkzeuge for tailored application advice on the Tungaloy TCMT110204 T9225 insert and assistance with holder selection; email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss specific machining needs Technical data Article number: 6781055 Manufacturer SKU: TUN6781055 Our SKU: 6781055-Tungaloy Designation: TCMT110204 T9225 Series: ISO turning indexable inserts Manufacturer: Tungaloy Core specifications Corner radius: 0.4 mm Included angle: 60° Relief angle: 7° Thickness: 2.38 mm Size: 11 Grade: T9225 Special features CVD-coated carbide Single-sided chipbreaker Triangular insert form Cylindrical hole with single-sided countersink (40°–60°) Intended application: turning (external and internal) Suited to medium-to-heavy steel and interrupted cuts ISO compatibility; system composed of insert, external holder, underlay/clamp set and screws FAQ Is this insert suitable for interrupted cuts? The TCMT110204 T9225 Tungaloy indexable insert (SKU 6781055-Tungaloy) is specifically described as a robust universal grade suitable for interrupted or variable-engagement cuts in medium-to-heavy steel turning. Which materials can be machined with this grade? The T9225 grade is formulated for machining steel in medium-to-heavy applications; it provides a balance of toughness and wear resistance for such materials. How does the insert locate in the holder? The insert features a central cylindrical hole with a single-sided countersink (40°–60°) for secure clamping; proper seating depends on matching the holder form, clearance and tolerance class. What surface finish can be expected with a 0.4 mm corner radius? A 0.4 mm corner radius offers improved edge strength while delivering acceptable surface quality for general turning operations; finer finishes may require a smaller radius or secondary finishing passes. Can the insert be used for internal turning? Yes, the indexable insert is suitable for both external and internal turning when used with the appropriate ISO-compatible holder and tool geometry. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCMT 110204 T9225 Wendeplatten - Tungaloy
The combination of a CVD-coated carbide grade and the ISO TCMT110204 geometry delivers robust tool life and consistent chip control in medium-to-heavy steel turning; the 0.4 mm corner radius and 7° relief enable predictable surface finish and stable cutting under varying conditions. Order the insert directly via Metav Werkzeuge or consult the advisors for application guidance. TCMT 110204 T9225 Turning Insert (Triangle, 60°) by Tungaloy The TCMT110204 T9225 is a CVD-coated carbide turning insert designed for medium-to-heavy steel turning operations, offering a triangle form with a 60° included angle and a 0.4 mm corner radius. CVD-coated carbide grade T9225 for toughness ISO TCMT geometry with 60° included angle 0.4 mm corner radius for reliable edge strength With hole and single-sided countersink for secure clamping Reliable performance for interrupted and heavy cuts The CVD-coated carbide grade T9225 is formulated for a balance of toughness and wear resistance, making it suited to medium-to-heavy steel machining where varying engagement or light interruptions occur. The CVD coating provides a protective layer that reduces flank wear and improves tool life, while the substrate retains sufficient toughness to absorb shocks. In practice, this means fewer unexpected tool changes and more consistent batch-to-batch component quality, with improved surface integrity when machining challenging steels. Accurate geometry that simplifies tool selection and set-up The ISO designation TCMT110204 denotes a triangular indexable shape with a 60° included angle and standard ISO dimensions that ensure wide holder compatibility. The insert features a 7° clearance angle and a 0.4 mm corner radius, which together influence cutting forces and finished surface. The presence of a cylindrical hole with a single-sided countersink (40°–60°) ensures positive, repeatable seating in ISO external holders or boring bars, reducing set-up time and ensuring consistent part accuracy across tool changes. Controlled chips and adaptable cutting behaviour The insert’s single-sided chipbreaker geometry encourages short, controllable chips under typical steel cutting conditions; this assists coolant flow and evacuation, lowering the risk of re-cutting and improving operator safety. Choosing the correct chip former and the T9225 grade according to workpiece material and cutting parameters optimises both productivity and surface finish. The design supports a range of feeds and depths, so the same insert can cover several operations without compromising process reliability. Shop-floor benefits: productivity, repeatability and economy By combining an ISO-standard form with a robust coated grade, the insert provides a pragmatic route to lower overall machining costs through longer tool life and predictable performance. The repeatable seating and standard dimensions simplify inventory management and reduce downtime during tool changes. For production environments that demand stability and straightforward tool logic, this indexable solution helps secure consistent results and supports efficient process planning. For robust, universal steel turning with proven chip control, choose the Tungaloy TCMT110204 T9225 insert — contact Metav Werkzeuge for ordering and tailored application advice. Technical data Manufacturer article number: 6781119 Manufacturer SKU: TUN6781119 SKU: 6781119-Tungaloy Model series: ISO turning inserts Shape: triangular Material: carbide Core specifications ISO designation: TCMT110204 Size: 11 Thickness: 2.38 mm Corner radius: 0.4 mm Relief/clearance angle: 7° Included angle: 60° Special features Grade: T9225 (CVD-coated carbide) Chipbreaker: single-sided Hole: cylindrical hole + single-sided countersink (40°–60°) Application: turning System compatibility: ISO indexable insert; suitable for external holder or boring bar; backing/clamping set and spare screws FAQ What materials is this insert suitable for? The TCMT110204 T9225 insert is specified for medium-to-heavy steel turning; the T9225 CVD-coated carbide provides toughness and wear resistance suited to varying engagement conditions. How does the chipbreaker affect machining? The single-sided chipbreaker on this TCMT-style insert promotes short, manageable chips and improved coolant access, aiding surface finish and process stability during steel turning operations. Is the insert compatible with standard ISO holders? Yes, the TCMT110204 follows ISO geometry and the cylindrical hole with countersink ensures secure, repeatable seating in compatible external holders and boring bars. What does the 0.4 mm corner radius mean for finish and strength? A 0.4 mm corner radius increases edge strength compared with a sharper corner, helping to withstand interrupted cuts while still delivering a good surface finish in turning applications. Which features should be considered when replacing inserts? Match the ISO designation, corner radius, chipbreaker style and the T9225 grade to maintain cutting performance; the TCMT110204 form and hole/countersink arrangement ensure correct clamping and orientation. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCMT 110204 T9225 Wendeplatten - Tungaloy
Take advantage of the combination of robust CVD-coated carbide performance and ISO compatibility for reliable medium-to-heavy steel turning; order the insert directly via Metav Werkzeuge or ask the consultants for application guidance. TCMT110204 T9225 turning insert by Tungaloy — CVD-coated carbide, 60° triangular geometry A TCMT110204 ISO-standard turning insert engineered for medium to heavy steel machining, offering high toughness for interrupted cuts and consistent chip control CVD-coated carbide grade T9225 Triangular ISO TCMT 110204, 60° geometry 7° relief for stable cutting performance 0.4 mm corner radius for general turning Suitable for medium to heavy steel machining Robust performance for demanding steel turning The CVD-coated carbide grade T9225 delivers a balance of toughness and wear resistance that benefits longer production runs and variable cutting conditions. Designed as a universal, robust grade, the coating improves heat resistance while the substrate provides the necessary toughness for interrupted cuts and heavier engagement. This combination reduces the frequency of insert changes and contributes to a steadier tool life, supporting a more predictable production rhythm and lower process interruptions. ISO triangular format for easy system integration The insert follows ISO dimensions and a 60° triangular geometry, making it compatible with standard holders when shape, relief angle, tolerance class, clamping method, size and thickness are matched. The integrated central hole with a cylindrical bore and a one-sided countersink (40°–60°) ensures secure mounting in the clamping set and replacement screws. Specifying the matching external holder, shim and clamp kit completes the system and minimises setup time, enabling fast interchangeability across batches and machines. Controlled cutting edge for repeatable surface quality A 0.4 mm corner radius offers a compromise between edge strength and surface finish, helping to maintain dimensional stability during turning operations. The relatively modest radius reduces cutting forces compared with larger radii while still providing sufficient edge support for medium to heavy machining. Combined with the insert thickness and geometry, this results in improved repeatability of part finish and reduced risk of edge chipping under variable engagement or slight tool deflection. Application guidance and selection rationale As a turning solution the insert is intended for external and internal operations where a single-sided chipbreaker suits the workpiece material and machine rigidity. For best results, select cutting data and holder rigidity to match the grade’s toughness: slower feeds and conservative depths of cut shorten trial times when first evaluating the insert on harder or unstable setups. The grade’s versatility makes it suitable for a broad range of steel types and changing cutting conditions; however, compatibility checks remain essential to ensure the holder form, free angle and clamp arrangement deliver secure, vibration-free cutting. Select Tungaloy’s TCMT110204 T9225 for dependable medium-to-heavy steel turning and contact Metav Werkzeuge for delivery, technical matching and fast availability via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6781460 Manufacturer SKU: TUN6781460 SKU: 6781460-Tungaloy Model series: ISO turning indexable inserts Facts Corner radius: 0.4 mm Relief angle: 7° Plate thickness: 2.38 mm Inscribed circle / size: 11 mm Insert angle: 60° Countersink angle: 40°–60° Special features CVD-coated carbide Grade T9225 — robust universal grade Single-sided chipbreaker Triangular insert form Central hole: cylindrical with one-sided countersink Application: turning (external and internal) Suitable for medium to heavy steel machining FAQ What materials is this insert best suited for? The TCMT110204 T9225 insert is optimised for medium to heavy steel machining, offering toughness for varied engagement and interrupted cuts. How does the T9225 coating affect tool life? The CVD-coated carbide substrate of this grade improves heat resistance and wear control, which generally extends useful tool life under robust turning conditions. Can this insert be used in interrupted cutting? Yes, the T9225 grade is designed for applications that include slight interruptions; its toughness helps resist chipping under variable load. What holder features are required for compatibility? Compatibility depends on matching the holder to the insert’s 60° triangular geometry, 7° relief, thickness and clamping method; secure clamping with the correct shim and screw is essential. Is this insert suitable for finishing and roughing operations? The 0.4 mm corner radius and single-sided chipbreaker provide a balance suitable for general turning; for precision finishing or heavy roughing, choose radius and chipbreaker combinations aligned to the operation. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TCMT 110208 AH6225 Wendeplatten - Tungaloy
Order the TCMT110208 AH6225 Tungaloy insert for dependable stainless-steel turning that combines a sharp, stable cutting edge with straightforward holder compatibility; order the TCMT110208 AH6225 Tungaloy insert directly via Metav Werkzeuge or ask our consultants if needed. TCMT110208 AH6225 Tungaloy triangular turning insert, PVD-coated carbide, 0.8 mm radius The TCMT110208 AH6225 Tungaloy insert is an ISO triangular indexable insert designed for external and internal turning, offering a balanced combination of edge sharpness and wear resistance for variable machining conditions. TCMT110208 triangular ISO turning insert PVD-coated AH6225 grade for stainless steel 0.8 mm corner radius and 7° clearance Cylindrical hole with 40°–60° countersink Engineered for reliable stainless-steel turning The insert uses a PVD-coated carbide substrate in the AH6225 grade, developed as a universal solution for stainless steel machining. The coating and substrate geometry deliver a sharp yet stable cutting edge, reducing built-up edge and improving consistency during interrupted or varied cuts. For production environments that demand repeatable component quality, this combination supports longer productive tool life and more predictable tool-change intervals, which in turn helps to sustain machining throughput. Precision geometry for consistent chip control A 60° included angle and a 0.8 mm corner radius provide a robust geometry that balances strength and finish capability. The single-sided chipbreaker is tuned for mid-range turning operations and aids in controlled chip formation, reducing the risk of entangling swarf and improving surface integrity. The plate features a cylindrical hole with one-sided countersink (40°–60°) to ensure secure clamping and accurate seating in compatible toolholders; combined with a 2.38 mm thickness, the geometry supports stable cutting under typical turning feeds and depths. ISO compatibility and mounting clarity for fast changeovers As an ISO-standardised insert, compatibility with holders depends on form, clearance angle, tolerance class, fastening and size. The triangular plate (size 11) fits a wide range of ISO toolholders when matched correctly, enabling rapid exchange and reliable repeatability. Clear identification of the plate dimensions and hole style simplifies holder selection and reduces setup time. This modular approach delivers operational efficiency: fewer downtime minutes for insert changes and consistent positioning for subsequent operations. Material and coating technology that improves productivity The carbide substrate combined with a PVD-coated surface improves wear resistance, maintaining the integrity of the cutting edge during medium machining conditions. The AH6225 grade is optimised for a combination of edge life and surface finish on stainless steel, offering a practical balance between tool life and machining speed. For users transitioning from general-purpose grades, this insert often provides improved performance where a sharper cutting geometry is required without sacrificing robustness. For reliable stainless-steel turning with the Tungaloy AH6225 grade, contact Metav Werkzeuge for tailored advice and ordering: info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6829877 SKU: 6829877-Tungaloy Manufacturer SKU: TUN6829877 Designation: TCMT110208 AH6225 Type: Indexable turning insert Model series: ISO turning indexable inserts Facts Corner radius: 0.8 mm Relief / clearance: 7° Thickness: 2.38 mm Size (IC): 11 Included angle: 60° Hole: cylindrical hole + one-sided countersink (40°–60°) Special features PVD-coated carbide substrate Grade AH6225 — universal for stainless steel Single-sided chipbreaker Triangular plate shape With hole for positive clamping Suited to external and internal turning applications FAQ What materials is this insert best suited for? The TCMT110208 AH6225 Tungaloy turning insert is optimised for stainless steel applications; the AH6225 grade provides a balance of edge stability and wear resistance for mid-range turning operations. How does the chipbreaker influence machining? The single-sided chipbreaker on this indexable plate promotes predictable chip form and evacuation during turning, which helps to maintain surface quality and reduce the likelihood of chip entanglement. Which holders are compatible with this ISO triangular insert? Compatibility depends on holder form, clearance, tolerance class, fastening and plate thickness; matching a 60° triangular ISO holder designed for size 11 plates ensures correct seating and repeatable positioning for the TCMT110208 insert. How should the insert be secured in the holder? Use the designated clamping screw and backing pad compatible with the ISO triangular plate and the cylindrical hole with countersink; correct torque and a matched clamp system prevent movement and support consistent cutting performance. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com