TPGN 110308 DX140 Wendeplatten - Tungaloy
Take advantage of the TPGN110308 DX140 combination of durable PCD cutting edge and ISO-compatible triangular geometry for reliable, high-speed turning of aluminium and non-ferrous materials; order directly via Metav Werkzeuge or contact our team for application advice. TPGN110308 DX140 triangular turning insert, PCD grade, 60° geometry — Tungaloy The TPGN110308 DX140 is an ISO triangular turning insert designed for high-speed machining of aluminium and other non-ferrous materials, offering a robust PCD cutting layer on a carbide substrate for extended tool life. High-speed PCD grade DX140 for aluminium machining 60° geometry for stable external and internal turning 0.8 mm corner radius for fine profile control ISO-compatible triangular insert, no central hole Reliable high-speed performance for non-ferrous turning The triangular insert delivers consistent performance where cycle times matter. With a polished PCD cutting surface in grade DX140, the insert enables high cutting speeds and exceptionally low wear when machining aluminium and other non-ferrous alloys. The combination of a wear-resistant diamond layer and a solid carbide substrate reduces flank wear and keeps tolerances stable over longer runs, which supports predictable process planning and fewer tool changes. Precise geometry that simplifies tool selection and set-up Engineered with a 60° wedge angle and an 11° clearance, the insert offers a balanced cutting geometry for both external and internal turning operations. The triangular shape and ISO compatibility mean the insert fits a wide range of holders when form, clearance angle and thickness are matched, simplifying tool sourcing for production lines. The 0.8 mm corner radius gives controlled cutting engagement for fine profiles without compromising edge strength. Practical benefits for shop-floor productivity A thickness of 3.18 mm and a size 11 designation ensure sufficient stiffness in the clamping zone, reducing chatter and improving surface finish in semi-finish to finishing operations. The absence of a central hole and of an integrated chipbreaker reduces assembly variables and makes the insert particularly suitable for stable, predictable turning set-ups where chip control is handled by tool geometry and cutting parameters. Application guidance and material suitability Designed primarily for turning applications, the grade is optimised for abrasive or adhesive-prone non-ferrous materials. The PCD edge maintains form and cutting ability where conventional coatings would rapidly degrade, delivering long tool life and consistent part quality. Select the matching holder and cutting data according to the machine stiffness and workpiece material to exploit the durability advantages of the diamond cutting layer. For tailored advice on integrating the TPGN110308 DX140 insert into production, contact Metav Werkzeuge for application recommendations and availability; their specialists can assist with holder compatibility and cutting data. Technical data Article number: 6808833 Manufacturer SKU: TUN6808833 Item label: TPGN110308 DX140 Tungaloy-Wendeplatte Facts Insert geometry: triangular Cutting angle: 60° Clearance (relief) angle: 11° Thickness: 3.18 mm Corner radius: 0.8 mm Size designation: 11 Special features Cutting material: polykristalliner Diamant (PCD) Grade: DX140 Substrate: carbide Central hole: without hole Chipbreaker: without chipbreaker Typical application: turning (external and internal) ISO-series: ISO turning indexable inserts — compatibility depends on form, clearance, tolerance class, fastening, size and thickness FAQ What materials is this insert best suited for? The TPGN110308 DX140 insert is optimised for aluminium and other non-ferrous materials, where the PCD grade DX140 offers high wear resistance and extended life. Can this insert be used in existing ISO holders? Yes — the insert follows ISO dimensions for triangular turning inserts; compatibility requires matching form, clearance angle, tolerance class, fastening method, size and thickness. What benefits does the DX140 grade provide compared with coated carbide inserts? DX140’s PCD cutting edge provides superior abrasion resistance and longer life on abrasive non-ferrous materials, enabling higher cutting speeds and more consistent surface finishes than typical coated carbide grades. Is the insert suitable for finishing operations? With a 0.8 mm corner radius and precise geometry, the insert is suited to semi-finish and finish turning where a balance between edge strength and profile control is required. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPGN 110308 LX10 Wendeplatten - Tungaloy
Take advantage of the combination of ISO‑standard geometry, a robust LX10 carbide grade and a compact 11 mm size for predictable turning performance and minimal setup time. Order genuine Tungaloy indexable inserts directly via Metav Werkzeuge or contact the technical team for compatibility advice. TPGN 110308 LX10 triangular ISO turning insert, 60° included angle — Tungaloy The TPGN110308 LX10 is an ISO‑standard indexable turning insert designed for external and internal turning applications, offering a compact 11 mm size and robust carbide construction for stable cutting performance. ISO‑standard triangular insert, 60° included angle Tungaloy LX10 carbide grade for wear resistance 11 mm size with 0.8 mm corner radius Compatible with standard ISO turning holders ISO geometry for reliable interchangeability and predictable results The triangular ISO form with a 60° included angle ensures straightforward interchangeability across widely used toolholders. The insert’s geometry, combined with its specified relief or free angle (11°), defines how it sits in the holder and how the cutting edge engages the workpiece. Because compatibility depends on form, free angle, tolerance class, clamping and thickness, manufacturers and toolroom managers benefit from reduced setup variability and faster insert changes. This leads to steadier process control and shorter machine downtime for series production. LX10 carbide grade for extended tool life under real conditions The LX10 grade brings a tailored balance of wear resistance and edge toughness, minimising flank wear while retaining sufficient fracture resistance for mixed turning tasks. Such a composition supports longer uninterrupted runs and fewer indexings compared with generic grades, improving overall productivity. For shops seeking consistent surface quality and predictable insert life, this grade contributes to lower tooling costs per component and more stable batch output. Precision dimensions that simplify integration into existing systems Key dimensions — corner radius 0.8 mm, thickness 3.18 mm, and insert size 11 mm — make the part easy to match with standard ISO turning holders and clamping kits. The insert is supplied without a hole and without an integrated chipbreaker, so the clamping relies on the holder’s seating, shim or clamp set and screw selection. The compact design reduces overhang and vibration potential when paired with an adequately rigid holder, yielding improved repeatability and surface finish in both roughing and finishing cuts. Process advice for broad material coverage and application flexibility Intended for turning, this insert works well when the cutting grade and chip control are chosen to suit the workpiece and machining conditions. The absence of a chipbreaker on the insert itself means chip control must be achieved by choosing the appropriate holder geometry or an alternative insert variant with a matching breaker. For general turning tasks, the LX10 grade and the insert’s geometry support a wide range of steels and cast irons; selecting the correct cutting data and stability level will optimise tool life and part quality. For Tungaloy inserts and tailored recommendations, contact Metav Werkzeuge for availability and application guidance at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6852222 SKU: 6852222-Tungaloy Manufacturer SKU: TUN6852222 Designation: TPGN110308 Name: TPGN110308 LX10 Tungaloy turning insert Material: Carbide Facts Included angle: 60° Corner radius: 0.8 mm Free angle (relief): 11° Insert thickness: 3.18 mm Insert size: 11 mm Special features Triangular insert form No hole No chipbreaker on insert Grade: LX10 (Tungaloy) Model series: ISO turning inserts Intended use: Turning (external and internal) Compatibility determined by form, free angle, tolerance class, clamping, size and thickness FAQ What materials is this insert suitable for? The LX10 grade insert is designed for general turning and covers a broad range of steels and cast irons when cutting data and stability are adapted; the grade supports both wear resistance and edge stability in mixed applications. How does the absence of a chipbreaker affect machining? With no chipbreaker on the insert, chip control must be achieved through holder selection or by using a matched insert variant with a chipbreaker; the TPGN110308 is therefore best used where holder geometry or external chip control is available. How to ensure correct compatibility with existing holders? Compatibility is determined by the insert form, free angle (11°), tolerance class, clamping method, size and thickness — checking these parameters against the holder specification ensures proper seating and secure clamping. What benefits does the LX10 grade provide in production? The LX10 carbide grade offers a balance of wear resistance and toughness, giving longer tool life and steadier surface finish results for many turning operations, which helps reduce tool change frequency. Is this insert suitable for finishing as well as roughing? Yes; with a 0.8 mm corner radius and the appropriate cutting data, the insert can be used for both roughing and finishing, provided machine-tool rigidity and holder stability are adequate. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPGN 110308 LX11 Wendeplatten - Tungaloy
Take advantage of the combination of high wear resistance, stable cutting-edge performance and ISO compatibility to maintain productive turning operations; order directly via Metav Werkzeuge or consult the team for application advice. TPGN 110308 LX11 — Tungaloy turning insert (triangular, 11 mm, 60°) TPGN 110308 LX11 is an ISO‑compliant indexable insert intended for turning applications, engineered for a balance of wear resistance, toughness and cutting‑edge stability by Tungaloy. ISO‑compliant triangular insert TPGN LX11 grade for wear resistance and toughness 60° cutting angle for versatile turning Compatible with ISO holders and clamping systems Maximum productivity through material‑matched performance The LX11 grade from Tungaloy combines a modern carbide composition with a geometry chosen for turning, delivering a reliable balance between wear resistance and toughness. This results in extended tool life under typical external and internal turning conditions and helps reduce unplanned tool changeover. The 0.8 mm corner radius smooths engagement forces, improving surface quality on interrupted cuts, while the 60° insert angle supports a broad range of cutting depths without sacrificing stability. These measurable properties translate directly into fewer tool stops and a steadier production flow. Fast integration with existing holder systems Compatibility is determined by insert form, relief angle, tolerance class, fastening type, size and thickness; the triangular TPGN geometry and 3.18 mm thickness are standardised for ISO clamping systems, simplifying replacement in established toolbanks. The insert is supplied without a central hole and without a chipbreaker, so holders and clamping kits designed for TPGN110308 seats are required for correct fixation and repeatable positioning. Clear specification of these parameters reduces setup time and ensures repeatable clamping accuracy across batches. Broad application range and material adaptability This turning grade is suited to a wide spectrum of steels and alloyed materials when combined with an appropriate coolant and cutting data. Selection of a matching chipbreaker and cutting parameters should be based on the workpiece material, machining strategy and machine‑tool rigidity. The carbide substrate and the LX11 grade support operations from general finishing to more demanding semi‑roughing steps, offering a pragmatic compromise between productivity and surface integrity. Reliable, production‑focused design for workshops Designed for everyday industrial machining, the insert’s ISO standardisation and Tungaloy’s grade technology provide predictable tool life and consistent surface results. For shops seeking to streamline inventory, the TPGN110308 geometry allows interchangeability across common external and internal turning holders, while the LX11 formulation contributes to stable chip formation and reduced flank wear. The result is fewer unscheduled interventions and improved process control over serial production. Contact Metav Werkzeuge to discuss how the Tungaloy LX11 inserts can optimise turning processes and to arrange supply—email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6808828 Manufacturer SKU: TUN6808828 SKU: 6808828-Tungaloy Model series: ISO turning inserts Facts Corner radius: 0.8 mm Relief angle (clearance): 11° Cutting angle: 60° Size: 11 mm Thickness: 3.18 mm Special features Grade: LX11 (Tungaloy) Material: carbide Shape: triangular Hole: without hole Chipbreaker: none Application: turning Compatibility criteria: form, relief, tolerance, fastening, size, thickness FAQ What materials are suitable for machining with this insert? The TPGN110308 LX11 insert is designed for general turning and performs well on a wide range of steels and alloyed materials when matched with suitable cutting data and a correct chipbreaker selection. Is a specific holder required for correct clamping? Compatibility depends on the ISO seat geometry; the triangular form, thickness and size require a matching ISO turning holder and clamping kit for secure and repeatable fixation of the insert. How does the 0.8 mm radius affect surface finish? A 0.8 mm corner radius smooths engagement and reduces cutting forces, which generally improves surface finish and provides better performance on interrupted cuts compared with very small radii. Does this insert include a chipbreaker or a central hole? The insert is supplied without a chipbreaker and without a central hole; chip control and fixation must therefore be arranged via the selected holder and cutting geometry. Which benefits does the LX11 grade provide compared with standard carbide grades? The LX11 grade offers an engineered balance of wear resistance and toughness, delivering stable cutting‑edge behaviour and predictable tool life in turning operations. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
TPGN 110308 TH10 Wendeplatten - Tungaloy
Take advantage of the combination of precise ISO conformity, low cutting forces and clean surface results for efficient turning operations. Order the insert directly via Metav Werkzeuge or consult our specialists for application-specific advice. TPGN 110308 TH10 triangular indexable turning insert by Tungaloy — 60° geometry, 0.8 mm nose radius TPGN 110308 TH10 is an ISO-standard triangular insert designed for general turning applications on non-ferrous materials, offering a sharp, uncoated carbide cutting edge for low cutting forces and superior finishes. ISO-compliant triangular insert 60° Uncoated carbide for low cutting forces 0.8 mm nose radius for fine finishing 11° relief angle and 3.18 mm thickness Precision geometry that balances finish and stability The TPGN110308 TH10 embodies a classic 60° geometry in a triangular format, which gives a predictable cutting direction and three usable cutting edges per index. The 0.8 mm nose radius provides a fine compromise between edge strength and surface quality: it reduces vibration compared with very small radii while still enabling improved finish on light- to medium-cut turning operations. Because the insert conforms to ISO dimensions, holder compatibility is determined by form, relief angle and thickness, making it straightforward to find a matching clamping system and minimise setup time. Why an uncoated carbide grade is advantageous here The uncoated carbide grade TH10 is engineered as a sharp universal grade for non‑ferrous materials and for applications where a bare cutting edge helps to lower cutting forces and avoid material build-up. An uncoated edge slides more cleanly on soft, ductile materials and reduces the tendency for built-up edge, which in turn supports consistent surface quality. This choice is particularly effective when machining aluminium alloys, brass and other non-ferrous metals where heat generation and adhesion are the main concerns. Clear integration with holders and practical setup tips Compatibility depends on insert form, 11° relief angle, tolerance class, fastening method and plate thickness of 3.18 mm. When selecting a matching external holder or boring bar, ensure the seat and clamp align with the ISO designation to preserve the intended cutting geometry. For straightforward set-up, check clamping screw torque and seating cleanliness; a properly seated insert ensures repeatable positioning and extends the usable life of each edge. Using an appropriate positive or neutral holder will help exploit the low cutting-force advantage of this insert. Process benefits and recommended turning applications The insert is best applied to external and internal turning where a sharp edge yields better finishes and reduced cutting resistance. The lack of a chipbreaker focuses the advantage on free‑cutting, continuous chips typical of non‑ferrous machining; therefore, feed and depth should be adjusted to avoid long stringy chips in some alloys. The triangular shape gives three cutting edges per insert, improving economic efficiency, while ISO-standard sizing ensures easy replacement and inventory management. For consistent results, pair the insert with a holder that matches the plate thickness and orientation. Contact Metav Werkzeuge for supply and application advice on Tungaloy turning inserts (SKU TUN6808831) — expert assistance and fast dispatch are available via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6808831 Manufacturer SKU: TUN6808831 Label: TPGN110308 TH10 Tungaloy-Wendeplatte Model series: ISO-Drehwendeschneidplatten Material: Carbide Grade: TH10 Application: Turning Dimensions & core data ISO designation: TPGN110308 Size code: 110308 Shape: Triangular (60°) Nose radius: 0.8 mm Relief angle: 11° Thickness: 3.18 mm Design & special features Coating: uncoated Chipbreaker: none Hole style: without hole Typical system: insert + suitable external holder or boring bar, underlay/clamp set and screws Typical applications: external and internal turning; non-ferrous materials FAQ What materials is this insert best suited for? The TPGN110308 TH10 insert from Tungaloy is optimised for non‑ferrous materials such as aluminium and brass, where its uncoated TH10 grade reduces cutting forces and resists built‑up edge. How does the 0.8 mm nose radius affect finish and tool life? A 0.8 mm nose radius improves surface finish by smoothing tool marks while retaining sufficient edge strength for light to medium turning, making the insert suitable for finishing passes. Which holder features are required for correct fitment? Choose a holder that matches the ISO form, the 11° relief angle and the 3.18 mm plate thickness; correct seating and clamp torque are essential for repeatable performance with this Tungaloy insert (SKU TUN6808831). Is there a chipbreaker on this insert and what does that mean for chip control? This insert is supplied without a chipbreaker, so chip control depends on cutting parameters and material; it is ideal for free‑cutting non‑ferrous alloys where long, continuous chips are less problematic. How many cutting edges are available per insert and why is that economical? The triangular 60° design provides three usable cutting edges, offering good cost efficiency through multiple indexings before replacement. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPGN 160302 DX140 Wendeplatten - Tungaloy
Take advantage of the combination of DX140 PCD cutting material, ISO compatibility and a compact 60° triangular geometry for faster aluminium turning and extended tool life; order the insert directly via Metav Werkzeuge or consult our specialists for application advice. TPGN 160302 DX140 turning indexable insert — polycrystalline diamond for high-speed aluminium turning — Tungaloy The TPGN 160302 DX140 is a triangular ISO turning insert designed for high-speed machining of aluminium, non‑ferrous metals and abrasive non‑metallic materials, offering long tool life and consistent surface quality. High-speed PCD grade DX140 ISO-compatible triangular form Very long tool life for aluminium machining 0.2 mm corner radius for precision finishing Increased productivity through PCD-grade performance The combination of polycrystalline diamond (PCD) cutting material and the DX140 grade delivers markedly higher cutting speeds and extended service intervals compared with conventional carbide inserts. This turning insert, listed as TPGN160302‑DIA, is specifically engineered for productive machining of aluminium and other non‑ferrous materials: the wear resistance of the PCD layer reduces downtime for insert changes, which directly supports a smoother production flow and lower unit costs. The result is measurable process efficiency without sacrificing component quality. Secure seating and ISO-standard compatibility for reliable runs Designed to match ISO geometry and tolerance classes, the insert’s triangular form with a 60° included angle ensures compatibility with standard external holders and boring bars. Compatibility depends on form, relief angle, fastening and plate thickness; the insert is supplied without a hole, so selection of a matching clamping system or shim set is essential. When mounted correctly, the arrangement provides stable cutting conditions and repeatable positioning, reducing vibration and improving dimensional consistency in series production. Geometry optimised for precise finishes and small features With a 0.2 mm corner radius and an 11° relief angle, the insert supports fine finishing passes and accurate profile generation. The 3.18 mm plate thickness contributes to rigidity at the cutting edge while the carbide substrate provides a stable backing for the diamond cutting layer, combining toughness with the wear resistance of PCD. These geometric choices help achieve a consistent surface finish and protect edge integrity when machining thin walls or small contours. Application guidance and selection advice for best results For external and internal turning operations, choose the DIA chipbreaker and the DX140 grade when machining aluminium or abrasive non‑metallics; the chipbreaker and grade must align with material, cutting strategy and machine stability. The system typically comprises the ISO insert, a suitable external holder or boring bar, a shim/locking set and replacement screws. Where high removal rates or long unattended runs are required, this PCD option provides the best balance of speed and life, particularly for components produced in batches or continuous series. Discuss your application with Metav Werkzeuge to specify holders and cutting data for optimum performance; order the Tungaloy DX140 insert via Metav Werkzeuge or request tailored advice at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6808836 Manufacturer SKU: TUN6808836 Metav SKU: 6808836-Tungaloy Model series: ISO turning indexable inserts Designation: TPGN160302-DIA Manufacturer: Tungaloy Application: Turning Core dimensions Size: 16 mm Plate thickness: 3.18 mm Corner radius: 0.2 mm Included angle: 60° Relief angle: 11° Special features Triangular plate form Without hole Cutting material: polycrystalline diamond (PCD) Grade: DX140 Chipbreaker: DIA Substrate material: carbide Suitable for aluminium, non‑ferrous metals, abrasive non‑metals ISO-standardised geometry System: insert + holder/boring bar + shim/locking set + spare screws FAQ What materials is this insert best suited for? The TPGN160302‑DIA DX140 insert is optimised for aluminium, other non‑ferrous metals and abrasive non‑metallic materials thanks to its PCD cutting layer and DX140 grade. Can the insert be used for both external and internal turning? Yes, the geometry and chipbreaker selection support both external and internal turning; pairing the insert with an appropriate boring bar or external holder ensures stable performance. How does the DX140 grade improve productivity? DX140’s PCD cutting surface offers high wear resistance and allows high cutting speeds, which reduces the frequency of insert changes and increases net cutting time on the machine. What mounting considerations are important for this ISO insert? Compatibility depends on form, relief angle, fastening method and thickness; since this plate is supplied without a hole, ensure the chosen clamping system or shim set matches the triangular plate and its 60° angle. Is the insert suitable for finishing passes? Yes, the 0.2 mm corner radius and 11° relief angle provide the geometry required for controlled finishing cuts and good surface integrity. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPGN 160302 TH10 Wendeplatten - Tungaloy
Combining the sharp TH10 uncoated carbide grade and the DIA chipbreaker with a 0.2 mm corner radius, this ISO-standard triangular turning insert offers low cutting forces and consistently clean surface finishes; order the insert directly via Metav Werkzeuge or consult our specialists for application guidance. TPGN 160302 TH10 turning insert – Tungaloy, triangle ISO indexable insert, 60° included angle TPGN160302-DIA TH10 Tungaloy turning insert is an ISO-standard indexable insert designed for external and internal turning, providing a sharp, uncoated cutting edge suited to non-ferrous materials and applications where low cutting forces and excellent surface quality are priorities ISO-standard turning insert, triangle shape Uncoated carbide grade TH10 for non-ferrous 0.2 mm corner radius for precise finishes 3.18 mm thickness for stable clamping Precision cutting for non-ferrous turning applications The triangular, ISO-standard indexable insert is engineered for reliable performance in turning operations. With the TH10 uncoated carbide grade and a DIA chipbreaker, the insert delivers a sharp cutting edge that reduces cutting resistance. This combination is particularly effective when machining aluminium alloys and other non-ferrous materials where low cutting forces translate into higher spindle speeds, reduced power draw and improved tool life. The result is a more productive turning cycle and a clean surface finish that reduces downstream polishing or rework. Sharp edge geometry to reduce built-up edge and improve finishes An uncoated carbide grade like TH10 offers a naturally sharp edge geometry that helps prevent built-up edge on sticky materials. The DIA chipbreaker controls chip formation to avoid tangling and ensures predictable evacuations, while the fine 0.2 mm corner radius supports fine surface quality without sacrificing edge stability. For shops prioritising surface integrity and reduced burr formation, this grade-and-chipbreaker pairing supports shorter cycle times and fewer rejects. Designed for straightforward interchangeability and secure clamping The insert follows ISO dimensions and fits compatible triangular holders or boring bars; compatibility depends on form, clearance angle, tolerance class, fastening and thickness. Key geometric values such as the 16 mm size, 3.18 mm thickness and 60° included angle enable reliable locating in standard toolholders and allow repeatable positioning when indexing. The insert is supplied without a hole and is secured using the appropriate clamping kit and screw, forming a system with the holder and backing plate for stable machining. ###Consistent production through a proven grade and manufacturer support Tungaloy’s established production quality and the TH10 grade provide a balance of sharpness and wear resistance for many everyday turning tasks on non-ferrous workpieces. The combination of ISO conformity, a defined chipbreaker and measured corner radius helps maintain consistent part quality across batches, reducing set-up iterations. For technical matching—selecting the right holder, clamping kit or screw—consultation ensures the insert integrates smoothly into existing tool systems while optimising process stability. For expert selection and rapid supply of Tungaloy turning inserts, contact Metav Werkzeuge; technical enquiries and order assistance are available at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 6808835 SKU: 6808835-Tungaloy Manufacturer SKU: TUN6808835 Model series: ISO turning inserts Designation: TPGN160302-DIA TH10 Facts Insert size: 16 mm Thickness: 3.18 mm Corner radius: 0.2 mm Included angle: 60° Clearance angle: 11° Hole style: no hole Special features Material: carbide Grade: TH10 (uncoated) Chipbreaker: DIA Shape: triangular Application: turning Compatibility: ISO-standard holders FAQ What materials is this insert best suited for? The TH10 uncoated turning insert is optimised for non‑ferrous materials; its sharp carbide edge and DIA chipbreaker promote low cutting forces and clean finishes when machining aluminium and similar alloys. How does the DIA chipbreaker affect machining? The DIA chipbreaker controls chip shape and evacuation to prevent chip entanglement and to support consistent surface quality during turning operations with the TPGN160302-DIA insert. Which toolholder is required for this insert? This ISO‑standard triangular insert requires a compatible external holder or boring bar that matches the insert form, clearance angle and thickness; secure clamping with the correct backing plate and screw is essential for stable cutting. What does the 0.2 mm corner radius mean for part quality? A 0.2 mm corner radius offers a compromise between edge strength and fine finish, reducing vibration and helping to achieve improved surface integrity on turned components. Is the insert coated or uncoated and what are the benefits? The insert uses an uncoated carbide grade (TH10). Uncoated edges retain sharpness and lower cutting forces, which is advantageous for non‑ferrous materials and operations where minimal built‑up edge and excellent surface finish are required. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPGN 160304 BX360 Wendeplatten - Tungaloy
Take advantage of the combination of CBN cutting performance, ISO compatibility and precise geometry to achieve consistent finishing on hardened components; order directly via Metav Werkzeuge or consult our technical team for application advice. TPGN160304 BX360 indexable turning insert for hardened steels by Tungaloy The TPGN160304 BX360 is an ISO‑standard triangular indexable insert engineered for finishing and precision turning of hardened steels, offering a stable geometry for repeatable surface quality. ISO triangular insert TPGN160304 BX360 CBN grade for hardened steels and finishing 60° geometry with 0.4 mm corner radius 11° clearance, 3.18 mm thickness, no hole Precise finishing for hardened components with minimal rework This grade is based on CBN technology and is optimised for wear‑intensive finishing of hardened steels, delivering long tool life and consistent dimensional control. The abrasive‑like hardness of CBN maintains an effective cutting edge under high contact stresses, which reduces frequency of insert changes and contributes to a more economical machining process. For end faces and external profiles a fine cutting edge and small corner radius help achieve the required surface finish and tolerance without repeated correction passes. Fast, reliable set‑up through ISO compatibility and clear datum features The insert follows ISO‑standard geometry and size, so selection and mounting are straightforward when using the correct holder and clamp set. Compatibility is governed by plate form, clearance angle, tolerance class, fastening method, size and thickness; attention to these details ensures correct seating and repeatable tool offsets. The clearly defined 11° clearance and triangular 60° form simplify tool‑path planning and reduce bench time during insert exchanges, supporting higher machine uptime and predictable cycle times. Balanced geometry and process security for finishing operations With a 0.4 mm corner radius and 3.18 mm plate thickness, the geometry balances edge strength and fine finishing capability. The absence of an integrated chipbreaker indicates suitability for stable finishing cuts where consistent chip formation is already achieved by cutting parameters. In combination with a rigid toolholder and appropriate cutting data, this design supports reliable surface integrity and low vibration, making it well suited to both external and internal turning tasks where high hardness and wear resistance are critical. Contact Metav Werkzeuge for detailed application support and to request a quotation for the TPGN160304 BX360 insert; technical consultants are available to advise on holder selection and cutting data Technical Data Article number: 6808846 Manufacturer SKU: TUN6808846 Model series: ISO‑Drehwendeschneidplatten Designation: TPGN160304 BX360 Facts Corner radius: 0.4 mm Thickness: 3.18 mm Plate size: 16 mm Included angle: 60° Clearance angle: 11° Special features Cutting material: cubic boron nitride (CBN) Substrate: cemented carbide Plate shape: triangular Hole: without hole Chipbreaker: without Typical application: external and internal turning System components: insert, suitable holder or boring bar, shim/clamp set, replacement screws Intended use: finishing and wear‑intensive machining of hardened steels FAQ What materials is this insert designed for? The TPGN160304 BX360 insert is designed primarily for hardened steels and, depending on the variant, can also be used for certain cast irons; the CBN cutting material provides high wear resistance for finish turning. How does the 60° geometry influence machining? A 60° included angle gives a compact cutting edge that is ideal for profiling and finishing operations, enabling good access in tight features while maintaining edge strength. Is a holder change necessary to use this insert? Correct mounting requires a holder that matches the ISO TPGN form, size, thickness and clamping style; the insert’s compatibility is determined by form, free angle, tolerance class, fastening and dimensions. Can this insert be used for roughing operations? The BX360 CBN grade is optimised for finishing and wear‑intensive end operations rather than heavy roughing; for high metal removal rates a different geometry or grade is usually preferable. What identifiers should be quoted when ordering? Please quote the designation TPGN160304 BX360, the article number 6808846, and the manufacturer SKU TUN6808846 to ensure accurate supply. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPGN 160304 DX120 Wendeplatten - Tungaloy
TPGN160304 DX120 combines the high wear resistance of a PCD cutting edge with the repeatable geometry of an ISO-format triangular insert, delivering reliable high-speed performance and long tool life. Order the insert directly via Metav Werkzeuge or consult our specialists for application-specific recommendations. TPGN160304 DX120 indexable turning insert for turning — Tungaloy The TPGN160304 DX120 is an ISO-format indexable turning insert designed for high-speed machining of aluminium, non-ferrous metals and abrasive non-metals in general turning operations. PCD cutting edge for high-speed machining Exceptional wear resistance and long tool life ISO-format triangle 60° form for versatility 0.4 mm corner radius and 11° clearance angle Consistent high-speed machining with PCD for non-ferrous materials The insert uses a PCD (polycrystalline diamond) cutting material that is optimised for aluminium and other non-ferrous alloys. This PCD layer provides a substantially harder cutting edge than conventional carbide grades, which enables high cutting speeds and a markedly long tool life when machining soft, abrasive or sticky workpiece materials. For applications where cycle time and predictable tool-change intervals matter, the combination of diamond cutting material and a rigid ISO geometry reduces unplanned downtime and improves process predictability. Practical compatibility and secure integration into ISO systems Produced in an ISO-format triangular shape with a 60° included angle, the insert fits standard indexable holders that match form, clearance, tolerance class, fastening method, size and thickness. The insert’s design — triangular form, 0.4 mm corner radius and 11° clearance angle — provides repeatable datum points for clamping, ensuring stable cutting conditions. When fitting into an external holder or boring bar, the system comprises the insert, the suitable outer holder or boring bar, a backing/wedge set and the appropriate fastening screws supplied by the tooling system manufacturer. Clear benefits for shop-floor decision-making Because the cutting edge is polycrystalline diamond, finishing quality and wear behaviour improve for aluminium and abrasive non-metals compared with conventional grades, which reduces rework and polishing. The substrate is a robust cemented carbide body that supports the PCD layer mechanically while maintaining insert rigidity. Selecting the DX120 grade aligns performance with productivity goals: longer intervals between changes, consistent surface finish and lower unit tooling costs in high-volume non-ferrous turning. Application guidance and selection tips For outdoor and internal turning tasks, choose the chipbreaker and grade to match the material, the type of machining and the rigidity of the setup. If the machining process involves interrupted cuts or limited rigidity, prefer sturdier clamping and verify holder compatibility. The absence of a hole means the insert is secured by the pocket and clamp system of the holder; ensure the holder’s seating matches the insert thickness and size to preserve repeatability and cutting stability. For enquiries about availability or to discuss application-specific setups for the Tungaloy DX120 PCD insert, contact Metav Werkzeuge directly at info@metav-werkzeuge.com or call +49 2822 7131930 for tailored advice and rapid delivery options Technical data Article number: 6808843 SKU: 6808843-Tungaloy Manufacturer SKU: TUN6808843 Brand: Tungaloy Model designation: TPGN160304 DX120 Core data ISO code: 160304 Included angle: 60° Corner radius: 0.4 mm Thickness: 3.18 mm Size: 16 mm Clearance angle: 11° Special features Cutting material: PCD (polycrystalline diamond) Substrate: cemented carbide Coating / grade: DX120 Shape: triangular Hole: without hole Chipbreaker: none Intended application: turning Series: ISO indexable turning inserts FAQ Which materials is the TPGN160304 DX120 suited to? The TPGN160304 DX120 insert is intended for aluminium, other non-ferrous metals and abrasive non-metals, leveraging its PCD cutting edge to sustain high cutting speeds and extended tool life. Will the insert fit standard ISO holders? Compatibility depends on matching the insert form, clearance angle, tolerance class, fastening method, size and thickness to the holder; the TPGN160304 DX120 follows ISO-format geometry for use with compatible indexable holders and boring bars. Can the insert be used at very high cutting speeds? The DX120 PCD grade is designed for high cutting speeds in non-ferrous turning; actual permissible speeds depend on machine capability, workpiece material and setup rigidity. How is the insert secured in the toolholder? The TPGN160304 DX120 is designed without a central hole and is secured by the toolholder pocket and clamp or wedge system; ensure the holder matches the insert thickness and seating for reliable clamping. How should the chipbreaker and grade be chosen for a specific job? Select the chipbreaker configuration and grade based on the workpiece material, the machining operation and the rigidity of the setup; the DX120 grade is recommended where high speed and long tool life for aluminium and abrasive non-metals are priorities. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPGN 160304 DX140 Wendeplatten - Tungaloy
Take advantage of the DX140 PCD grade and ISO compatibility for high‑speed aluminium and non‑ferrous machining; the combination of extended tool life and predictable performance reduces downtime and supports stable production. Order directly via Metav Werkzeuge or consult the team for holder recommendations. TPGN160304 DX140 triangular ISO turning insert — high‑speed PCD for turning, Tungaloy TPGN160304 DX140 is a triangular ISO turning insert designed for external and internal turning of aluminium, non‑ferrous metals and abrasive non‑metallic materials PCD grade DX140 for aluminium and non‑ferrous metals ISO‑standard TPGN160304 triangular insert High cutting speeds and extended tool life Compatible with ISO external and boring holders Optimised performance for aluminium and non‑ferrous machining The TPGN160304 DX140 combines a polished PCD cutting edge with a specifically tuned grade to enable high cutting speeds and very long tool life when machining aluminium and other non‑ferrous materials. Polycrystalline diamond (PCD) consists of diamond particles sintered on a carbide substrate; this structure delivers excellent wear resistance and thermal conductivity, which reduces edge deterioration under abrasive conditions. The result is fewer indexings and more consistent part quality, making the insert a rational choice for manufacturers seeking lower cost per part and stable cycle times. Precise fit and stable clamping for repeatable results The insert follows the ISO geometry TPGN160304 and is manufactured with a 60° included angle, an 11° clearance (relief) angle and a 0.4 mm corner radius, providing a predictable cutting profile and surface finish. With a plate thickness of 3.18 mm and a triangular form, the component seats reliably in compatible holders; compatibility is determined by form, relief angle, tolerance class, fastening method, size and thickness. This precision in dimensions reduces vibration and ensures the clamping system maintains a steady cutting position, which directly benefits dimensional accuracy and surface quality. Productivity gains and economical operation Selecting a DX140 PCD grade for demanding aluminium turning jobs supports higher feed and speed settings compared with conventional carbide grades, enabling cycle‑time reductions and higher throughput. The wear characteristics of PCD minimise flank wear and help preserve tolerances across longer tool life, which translates into lower tooling consumption and less frequent changeovers. For production environments where run times and repeatability are critical, the insert provides a cogent economic argument: higher productivity with reduced process variability. For detailed application advice or a recommendation for a suitable holder and clamping set, contact Metav Werkzeuge — call +49 2822 7131930 or email info@metav-werkzeuge.com for prompt, expert guidance and order processing. Technical data Article number: 6808844 Manufacturer SKU: TUN6808844 SKU: 6808844-Tungaloy Model series: ISO‑Drehwendeschneidplatten Designation: TPGN160304 Facts Corner radius: 0.4 mm Included angle: 60° Clearance angle: 11° Thickness: 3.18 mm Size: 16 mm Special features Grade: DX140 (PCD) Material: carbide substrate with PCD cutting layer Plate form: triangular Hole: without hole Typical application: turning (external and internal) Recommended for: aluminium, non‑ferrous metals, abrasive non‑metals System: ISO insert with compatible external holder or boring bar, shim/clamp and replacement screws FAQ What materials is this insert suitable for? The TPGN160304 DX140 insert is designed for aluminium, other non‑ferrous metals and abrasive non‑metallic materials, using the PCD cutting edge to maintain edge life and surface quality. Can this insert be used for internal turning operations? Yes, the ISO‑standard triangular shape and the specified dimensions allow use in both external and internal turning applications when the correct holder or boring bar is selected. What does DX140 indicate for this insert? DX140 denotes the PCD grade and coating specification tailored for high cutting speeds and long tool life on soft to abrasive non‑ferrous workpieces. How does the corner radius affect the machining result? The 0.4 mm corner radius provides a balance between cutting edge strength and surface finish, reducing the risk of edge chipping while delivering consistent part geometry. Is a special holder required for this ISO insert? A holder compatible with the TPGN160304 geometry, thickness and clamping style is required; the insert’s ISO dimensions ensure interchangeability with standard holders that match these parameters. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
TPGN 160304 GH110 Wendeplatten - Tungaloy
Benefit from the combination of the GH110 cutting-grade and ISO-compliant triangular geometry for consistent edge stability and economical turning cycles; order the insert directly via Metav Werkzeuge or consult the team for matching holder and tolerance class. TPGN 160304 GH110 turning insert — Tungaloy ISO triangular insert, 0.4 mm corner radius TPGN160304 GH110 is an ISO-designation turning insert for general external and internal turning, offering a balanced mix of wear resistance and edge stability in a triangular, indexable format. ISO TPGN160304 triangular insert GH110 grade for wear resistance 0.4 mm corner radius for fine profiling 11° clearance angle for stable cutting Durable grade that extends tool life and process reliability The GH110 carbide grade, developed by Tungaloy, combines wear resistance and toughness to keep cutting edges stable under routine turning loads. In practice this means fewer unplanned changeovers and more predictable component quality over longer tool life. The balanced microstructure of the substrate supports consistent performance during both finishing and light roughing, reducing scrap rates and smoothing production planning. Precise geometry for reproducible, ISO-compatible clamping The triangular ISO TPGN160304 form factor and the 11° clearance angle ensure a defined cutting geometry when paired with the appropriate holder. The 0.4 mm corner radius supports fine profiling and edge strength, while the 3.18 mm plate thickness contributes to secure clamping and reduced vibration. Compatibility depends on holder form, clearance angle, tolerance class, fastening and plate dimensions; matching these parameters leads to repeatable results and easier tool setup. System-ready insert for flexible turning applications This indexable plate integrates into the standard system build of insert, external holder or boring bar, clamp pad and retaining screw, enabling rapid changes and minimal downtime. With no central hole and no dedicated chipbreaker fitted, the insert suits applications where the chip control and process stability are defined by holder geometry and cutting data. Selecting a matching chipbreaker and grade for the workpiece and machining strategy ensures optimal surface finish and economical machining cycles. For availability and tailored application advice for the Tungaloy GH110 turning insert, contact Metav Werkzeuge via info@metav-werkzeuge.com or call +49 2822 7131930 to discuss holder compatibility and delivery options Technical data Article number: 6808837 Manufacturer SKU: TUN6808837 Label / SKU: 6808837-Tungaloy Model series: ISO-Drehwendeschneidplatten Core specifications ISO designation: 160304 Type: TPGN (triangular indexable insert) Corner radius: 0.4 mm Plate size: 16 mm Plate thickness: 3.18 mm Clearance angle: 11° Included hole: without hole Chipbreaker: without Materials and special features Material: carbide Grade: GH110 (Tungaloy) Application: turning (external and internal) Plate form: triangular Insert geometry angle: 60° FAQ What types of turning operations suit this insert best? The TPGN160304 GH110 insert is intended for standard external and internal turning operations where a balance of wear resistance and edge stability is required. How should the insert be mounted to achieve repeatable results? Mounting requires a compatible ISO holder matched by form, clearance angle (11°), tolerance class, fastening and plate thickness to ensure reproducible clamping and cutting geometry. Is a chipbreaker included with this insert? No; the TPGN160304 GH110 insert is supplied without a chipbreaker, allowing selection of chip control based on holder geometry and process requirements. What benefits does the GH110 grade provide in production? The GH110 carbide grade enhances wear resistance while maintaining toughness, which helps to extend tool life and support consistent surface quality in turning. Which SKU identifies this exact item for ordering? Order under article number 6808837 or manufacturer SKU TUN6808837 to specify the Tungaloy TPGN160304 GH110 turning insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPGN 160304 LX10 Wendeplatten - Tungaloy
Combining the LX10 grade's wear resistance with a 0.4 mm nose radius and ISO-standard triangular geometry delivers consistent, productive turning results for general external and internal operations; order the insert directly via Metav Werkzeuge or contact our consultants for application-specific advice. TPGN 160304 LX10 – ISO triangular turning insert by Tungaloy, 0.4 mm nose radius, 60° A TPGN160304 LX10 indexable insert designed for ISO-standard turning applications, optimised for external and internal turning where a balance of wear resistance and edge stability is required ISO-standard triangular insert LX10 grade for wear resistance 0.4 mm nose radius for fine profiles Compatible with standard clamping systems Consistent cutting geometry for reliable turning performance The triangular, ISO‑compliant geometry provides a stable cutting platform with an included angle of 60° and a 0.4 mm nose radius, enabling precise profile generation and predictable engagement in both roughing and finishing passes. The insert's form and dimensions support repeatable results when paired with an appropriate holder and clamping set, which is critical for maintaining process stability and reducing inspection effort. This stability contributes to shorter setup times and more consistent component tolerances in serial machining. Material grade and edge behaviour that match application demands The LX10 Tungaloy grade is a carbide-based cutting material formulated to complement the insert geometry by offering enhanced wear resistance and improved edge stability. These properties mean a lower rate of flank wear under comparable cutting conditions, translating into longer effective tool life and fewer indexings per workpiece series. For operations where tool longevity and reproducible surface quality matter, the combination of geometry and grade supports productive machining with reduced intervention. Clear compatibility and mount selection guidance Compatibility with toolholders is defined by insert form, relief angle (11°), tolerance class, clamping method, size and thickness; the insert thickness is 3.18 mm and the inscribed circle measures 16 mm, with the plate supplied without a hole and without a chipbreaker. Choosing a holder that matches these parameters ensures secure clamping and correct rake/relief orientation, which preserves the cutting edge and prevents premature failure. For applications that require specific chip control, select a matched insert geometry or holder solution, since this insert does not include an integrated chipbreaker. Practical benefits for workshop productivity By pairing ISO interchangeability with a purpose‑tuned carbide grade, the insert supports flexible production planning and faster tool changeovers. The standardised form enables rapid replacement and simplified tool inventory management, while the LX10 grade’s balance of toughness and hardness contributes to consistent part quality across shifts. Where process predictability and reduced tool handling are priorities, this insert provides a robust option for general turning tasks. Contact Metav Werkzeuge for tailored recommendations on the Tungaloy TPGN160304 LX10 insert, including holder compatibility checks and material‑specific advice — info@metav-werkzeuge.com | +49 2822 7131930 Technical Data Article number: 6836749 Manufacturer SKU: TUN6836749 SKU: 6836749-Tungaloy Designation: TPGN160304 LX10 Tungaloy indexable insert Manufacturer: Tungaloy Facts Nose radius: 0.4 mm Thickness: 3.18 mm Inscribed circle (size): 16 mm Relief angle: 11° Included angle: 60° ISO code: 160304 Special features Carbide substrate Grade: LX10 (Tungaloy) For turning (external and internal) ISO‑standard triangular insert Supplied without hole Supplied without chipbreaker Compatibility determined by form, relief angle, tolerance class, clamping, size and thickness FAQ What machining tasks is the TPGN160304 LX10 insert intended for? The TPGN160304 LX10 insert by Tungaloy is intended for general external and internal turning where a balanced combination of wear resistance and edge stability is required. Does the TPGN160304 LX10 include a chipbreaker? No, the TPGN160304 LX10 insert is supplied without a chipbreaker; chip control must be achieved by selecting an appropriate holder or an alternative insert geometry. Which holder parameters must be matched for correct installation? Compatibility for the TPGN160304 LX10 is determined by insert form, relief angle (11°), tolerance class, clamping method, size (16 mm) and thickness (3.18 mm); the holder must match these parameters for secure mounting. What practical advantage does the LX10 grade provide? The LX10 grade on the TPGN160304 insert provides improved wear resistance and edge stability, helping to extend tool life and maintain consistent surface quality over longer production runs. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPGN 160304 LX11 Wendeplatten - Tungaloy
Benefit from the combination of LX11 wear resistance and the 60° triangular geometry for steady, productive turning; compatibility requires matching form, relief angle (11°) and plate thickness (3.18 mm). Order the insert directly via Metav Werkzeuge or consult their specialists for application support. TPGN 160304 LX11 indexable insert for turning, Tungaloy — 60° triangular, 0.4 mm radius The TPGN160304 LX11 is an ISO‑standard triangular indexable insert designed for general external and internal turning, offering a balance of wear resistance and edge stability for a wide range of materials. ISO‑standard triangular insert TPGN 160304 LX11 Balanced wear resistance and edge stability 11° relief angle for versatile turning 3.18 mm plate thickness for secure clamping Stable cutting performance and clear productivity gain The triangular geometry with a 60° included angle and a small 0.4 mm corner radius provides a stable seating and repeatable contact point, which supports consistent machining results. Manufactured from carbide and specified in the LX11 grade, this insert is tailored to combine wear resistance with sufficient toughness for common turning tasks. The result is measurable process stability and longer effective tool life, enabling fewer tool changes and improved machine uptime. Compatibility guidance to avoid tooling mismatches Compatibility depends on the insert form, 11° relief angle, tolerance class, clamping method and the plate thickness of 3.18 mm. The insert is supplied without a hole and without a chipbreaker, so selection of a matching holder, shim and clamp is essential for secure fastening and correct rake/lead geometry. The system typically comprises the ISO insert, a suitable external holder or boring bar, a locating shim or clamp set and replacement screws — verifying these elements ensures safe, vibration‑free operation and predictable cutting forces. Application suitability and material coverage The LX11 Tungaloy grade is developed to deliver a useful compromise between wear resistance and edge stability, making it suitable for a broad spectrum of turning tasks across common engineering materials. Because the insert has no integrated chipbreaker, it is particularly effective where free‑flowing chips are acceptable or where the holder provides chip control; for heavy interrupted cuts or difficult alloys, choosing a matching chip control geometry and stable clamping enhances performance. The ISO designation and robust carbide construction support reproducible results and straightforward tool management on production lines. For application advice and to secure the correct TPGN 160304 LX11 insert and matching clamping components, contact Metav Werkzeuge for tailored recommendations and order handling. Technical data Article number: 6808838 Manufacturer article number: 6808838 SKU: 6808838-Tungaloy Manufacturer SKU: TUN6808838 Brand: Tungaloy Model series: ISO‑Drehwendeschneidplatten Facts Shape: triangular ISO designation: TPGN160304 Size: 16 mm Plate thickness: 3.18 mm Relief angle: 11° Included angle: 60° Corner radius: 0.4 mm Special features Grade: LX11 Material: carbide Chipbreaker: none Hole: without hole Intended use: turning (external and internal) System components: insert, holder or boring bar, shim/clamp set, replacement screws Compatibility determined by form, relief angle, tolerance class, clamping and size FAQ What applications is this insert best suited for? This insert is intended for general external and internal turning; the LX11 grade provides a balance of wear resistance and edge stability suitable for a wide range of materials. How is compatibility with a toolholder checked? Compatibility is verified by matching the insert form (TPGN), relief angle (11°), plate thickness (3.18 mm), clamping style and the tolerance class of the holder. Does the insert include a chipbreaker? The insert is supplied without a chipbreaker; chip control must therefore be achieved via the holder geometry or external tooling strategy. What are the key dimensions to note when ordering? Key dimensions are the ISO designation TPGN160304, size 16 mm, plate thickness 3.18 mm, relief angle 11° and corner radius 0.4 mm. Can this insert be used for hardened materials? The LX11 grade is optimised for a balance of wear resistance and toughness; for specifically hardened steels, selection should be aligned with the material hardness and cutting parameters. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPGN 160304 NS9530 Wendeplatten - Tungaloy
Take advantage of the combination of a cermet finishing grade (NS9530), a 0.4 mm corner radius and ISO compatibility for consistently high surface quality and low cutting forces; order the insert directly via Metav Werkzeuge or consult our technical advisers for application-specific selection. TPGN 160304 NS9530 triangular turning insert – uncoated cermet for finishing (Tungaloy) The TPGN 160304 NS9530 is a triangular ISO turning insert designed for finishing steel with low cutting forces and excellent surface quality, suited to continuous cuts and small depths of cut. Uncoated cermet grade NS9530 0.4 mm corner radius for high surface finish ISO TPGN triangular insert, 60° cutting geometry Suitable for continuous finishing of steel Consistent finishing performance thanks to cermet chemistry and geometry The combination of an uncoated cermet grade and a finely honed cutting edge gives stable, repeatable finishing results on steel. Cermet materials provide a sharp, wear-resistant edge that reduces built-up edge and lowers cutting forces; the result is improved surface finish and less vibration during continuous turning. The design favours fine feeds and small depths of cut, so process stability is increased when the focus is on high-quality turned surfaces rather than heavy material removal. Integrates with ISO tool systems for straightforward tool setup Designed to ISO conventions, the insert’s triangular form and 60° included angle allow straightforward mounting in standard holders. Compatibility is determined by form, clearance, tolerance class, clamping and thickness; here the 11° clearance angle and plate thickness 3.18 mm ensure correct seating and reliable clamping in appropriate external holders or boring bars. The system concept includes the insert, a matched external holder or bar, a shim/clamp set and replacement screws to maintain repeatable positioning and tool life. Operational advantages: edge radius, no chipbreaker and finishing focus The small 0.4 mm corner radius provides a balance between edge strength and the fine radii required for superior surface integrity. As a finishing grade without a chipbreaker, the insert is optimised for uninterrupted chips and continuous cuts; chip control and grade selection should be matched to workpiece stability and machining parameters. The absence of a chipbreaker reduces cutting forces and helps to preserve the sharp cermet edge, making it particularly effective for craftsmen and production engineers prioritising surface quality and dimensional accuracy. Practical selection and process guidance Select the matching grade and, if needed, a suitable chip control geometry based on the material and machining conditions; NS9530 is intended as a finishing sort for steel with a keen edge and low cutting forces. Where interrupted cuts or heavy feeds are required, consider a different grade or geometry. Serviceability is improved by the ISO system: spare screws and shims simplify replacement and keep machine downtimes to a minimum. For mixed-shop environments the standardised form reduces tool inventory complexity while maintaining high productivity. Contact Metav Werkzeuge for application advice on Tungaloy finishing inserts and to confirm holder compatibility; the Metav Werkzeuge team is available at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6998030-Tungaloy Manufacturer SKU: TUN6998030 Manufacturer item number: 6998030 Model series: ISO turning inserts Designation: TPGN160304 Grade: NS9530 Material: carbide Dimensions & cutting data Plate size: 16 mm Plate thickness: 3.18 mm Corner radius: 0.4 mm Clearance angle: 11° Included angle: 60° Features & applications Uncoated cermet finishing grade No chipbreaker Triangular plate form For turning of steel, suited to continuous cuts and small depths of cut Compatible with ISO external holders, shim/clamp sets and replacement screws FAQ What materials is this insert suited for? The TPGN 160304 NS9530 is specified as a finishing sort for steel and performs best on continuous turning operations where a fine surface finish is required. Does the insert include a chipbreaker? No, this insert is supplied without a chipbreaker; the NS9530 cermet grade is intended for uninterrupted chips and finishing cuts. Which holders are compatible with this insert? Compatibility depends on the ISO form, clearance angle, tolerance class, clamping method, size and thickness; use holders designed for ISO TPGN triangular inserts and verify seating for thickness 3.18 mm. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPGN 160304 TH10 Wendeplatten - Tungaloy
Benefit from a compact combination of uncoated carbide cutting performance and ISO compatibility: the sharp TH10 grade reduces cutting forces while the 0.4 mm corner radius supports fine surface finishes. The 11° relief and 3.18 mm thickness deliver stable seating in standard holders, maintaining consistent results in external and internal turning. Order the insert directly via Metav Werkzeuge or consult our advisors for application support. TPGN 160304 TH10 triangular indexable turning insert — uncoated carbide, Tungaloy The TPGN 160304 TH10 is an ISO-standard triangular indexable insert designed for external and internal turning, optimised for non-ferrous materials where a sharp, uncoated edge gives low cutting forces and clean surface quality. ISO triangular insert TPGN 160304 Sharp uncoated carbide grade TH10 0.4 mm corner radius for fine finishes 11° relief angle, 3.18 mm thickness Predictable cutting performance for efficient turning The triangular insert offers a combination of geometry and grade engineered for repeatable results in turning operations. The TH10 uncoated carbide provides a sharp, wear-resistant edge that helps to lower cutting forces when machining aluminium, brass and similar alloys; this translates into reduced machine load and improved cycle-time consistency. The small 0.4 mm corner radius aids in achieving fine finishes on external profiles and narrow shoulders without excessive tool deflection, while the 11° relief angle ensures positive clearance to avoid rubbing. Clear fit and system compatibility reduce set-up time Compatibility is determined by form, relief angle, tolerance class, fastening method, size and thickness; this insert adheres to ISO conventions for straightforward integration into existing toolholders. The 3.18 mm thickness and triangular ISO 160304 geometry make it suitable for standard clamping sets, requiring the matching seat, shim and screw to secure correct datum and clamping force. Specifying an ISO insert like this one simplifies inventory management and reduces downtime through predictable replacement and indexing. Material suitability and application-focused advantages This grade is intended primarily for machining non-ferrous materials and applications that benefit from a sharp, uncoated cutting edge. The lack of a coating reduces built-up edge tendencies on softer alloys, supporting cleaner surface appearance and consistent dimensional control. In practice, the insert performs well in light to moderate depths of cut and at feed rates that favour surface finish; selecting an appropriate chip control geometry for specific alloys will further enhance swarf evacuation and process stability. Handling, selection and process notes for reliable results Although presented without a chipbreaker and without a central hole, the triangular form allows for multiple indexed corners, extending the usable life per insert. When fitting into a holder, ensure the seat and fastening hardware match the ISO specification to maintain repeatable axial and radial positioning. For tougher operations or different materials, consider an alternative grade or a chipbreaker-equipped geometry; for many non-ferrous turning tasks, the uncoated TH10 grade offers an economical balance between low cutting resistance and surface integrity. For precision turning with the sharp TH10 uncoated grade, contact Metav Werkzeuge for tailored ordering and technical guidance via info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6808842 Manufacturer SKU: TUN6808842 SKU: 6808842-Tungaloy Model series: ISO turning indexable inserts ISO designation: TPGN160304 Core measurements Size: 16 mm Thickness: 3.18 mm Corner radius: 0.4 mm Relief angle: 11° Included angle: 60° Design and features Material: Carbide (uncoated) Shape: Triangular Hole: without hole Chipbreaker: without Application: Turning System requirements: matching holder, shim and screw FAQ What materials is this insert suitable for? The TH10 uncoated grade is intended for non-ferrous materials such as aluminium and brass; the insert’s geometry supports low cutting forces and clean surface finish. How many cutting edges are available per insert? The triangular form provides three usable corners; the design without a central hole or chipbreaker allows straightforward indexing until the corner wear limit is reached. Which holders fit this ISO designation? Any ISO-standard turning holder specified for TPGN 160304 geometry and the corresponding size/thickness will be compatible, provided the seat, shim and fixing screw match the holder's tolerance class. Why choose an uncoated grade over a coated one for certain applications? An uncoated carbide grade like TH10 reduces tendencies for built-up edge when machining softer alloys, giving improved surface quality and lower cutting resistance in many non-ferrous applications. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPGN 160308 BX360 Wendeplatten - Tungaloy
Take advantage of the combination of CBN cutting performance, a 60° triangular geometry and ISO compatibility for reliable hard-turning results; order genuine Tungaloy inserts via Metav Werkzeuge or consult the technical team for application support. TPGN 160308 BX360 Tungaloy indexable insert — CBN grade for hard turning A TPGN160308 BX360 ISO turning insert designed for wear-intensive finishing and consistent performance when machining hardened steels. CBN grade BX360 for hard turning ISO TPGN 160308 triangular 60° geometry Corner radius 0.8 mm for fine finishing Compatible with ISO turning toolholders High-performance CBN grade for hardened steels and finishing The BX360 grade is a cubic boron nitride (CBN) solution engineered for machining high-hardness materials, delivering superior wear resistance and thermal stability. As an indexable insert designed for hard turning, it ensures predictable tool life and consistent surface integrity, reducing downtime and rework. The result is a process that is both productive and repeatable, suitable for demanding finishing operations on hardened components. Geometry and system compatibility that reduce set-up time The triangular TPGN 160308 form with a 60° included angle and 11° clearance provides a stable cutting edge and straightforward seat alignment in ISO-standard holders. With a plate thickness of 3.18 mm and a nominal size of 16, the insert integrates into common turning tool systems where compatibility is determined by form, clearance angle, tolerance class, fastening and thickness. Clear geometry simplifies holder selection and shortens set-up procedures. Practical application guidance for turning and insert selection Optimised for external and internal turning, the insert performs best when matched with the appropriate chipbreaker and grade for the workpiece material; the current item is supplied without a chipbreaker and without a hole, intended for finishing of hardened steels and, depending on the version, some cast irons. For stable cutting conditions, select a holder and clamping set that match the ISO seat and consider modest feed rates and rigid fixturing to exploit the CBN edge’s strengths in surface finish and dimensional control. Process reliability and economy through wear-resistant cutting edges Using a CBN-based insert reduces flank wear in high-hardness applications and supports consistent component tolerances over longer tool life. The fine 0.8 mm corner radius assists in achieving tight surface specifications while maintaining acceptable cutting forces during finishing. Together, these attributes contribute to lower tool-change frequency and predictable machining cycles, which helps to improve overall machining economics in serial production. For applications in hardened steels, contact Metav Werkzeuge for expert selection of the TPGN160308 BX360 insert and to confirm compatibility with existing holders Technical data Article number: 6808855 Manufacturer SKU: TUN6808855 Name: TPGN160308 BX360 Tungaloy insert Core specifications Corner radius: 0.8 mm Included angle: 60° Clearance angle: 11° Thickness: 3.18 mm Size: 16 mm Plate form: triangular Materials & applications Substrate: carbide Grade: BX360 Cutting material: cubic boron nitride (CBN) Application: turning (external and internal) Suitable for: hardened steels; in some executions cast iron Chipbreaker: none Hole: none Standard: ISO turning inserts FAQ What materials is this insert intended for? The TPGN160308 BX360 insert is formulated with CBN for machining hardened steels and, depending on the specific execution, may be suitable for certain cast irons. How does the triangular 60° geometry affect machining? A 60° triangular form offers a stable cutting edge for finishing and allows compatibility with many ISO toolholders; the geometry supports predictable chip flow and repeatable seating. Is a chipbreaker included with this insert? This particular item is supplied without a chipbreaker, so chip control must be managed through toolpath parameters or by choosing an alternative insert with integrated chip control. Which holders are compatible with the insert? Compatibility depends on the ISO seat form, clearance angle, tolerance class, fastening method, and plate thickness; confirm fitting with the holder manufacturer or Metav Werkzeuge when in doubt. What is the manufacturer SKU for ordering? The manufacturer SKU is TUN6808855, and the article number is 6808855 for reference when ordering or enquiring. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPGN 160308 DX140 Wendeplatten - Tungaloy
Take advantage of the combination of polycrystalline diamond cutting performance and a carbide substrate for extended tool life and stable machining of aluminium and other non-ferrous materials; order the insert directly via Metav Werkzeuge or consult our technical team for application advice. TPGN 160308 DX140 Tungaloy indexable insert — for high-speed turning TPGN 160308 DX140 is an ISO-format turning insert designed for high cutting speeds in non-ferrous materials and abrasive non-metals, supplied as a triangular, holeless insert for secure clamping in ISO holders. Polycrystalline diamond (PCD) grade DX140 High cutting-speed capability for aluminium Triangle form with 60° included angle 0.8 mm corner radius for consistent profiles High-speed performance that shortens cycle times The PCD grade DX140 is engineered for high cutting speeds, delivering consistently long runtimes when machining aluminium and similar materials. With a diamond cutting layer on a carbide substrate, the insert provides a combination of wear resistance and toughness that reduces tool changes and keeps production lines moving. The result is a tangible increase in productivity through fewer interruptions and predictable tool life. Geometry and edge condition that improve surface quality The triangular insert with a 60° included angle and a 0.8 mm corner radius supports accurate profile generation and stable cutting forces during turning. The absence of an integrated chipbreaker directs process control towards stable cutting strategies for thin-walled workpieces and sections where chip control is managed by cutting parameters rather than geometry. This design helps produce improved surface finishes and repeatable component accuracy. Compatibility and straightforward integration into ISO tool systems As an ISO-standard insert, compatibility with external toolholders is determined by form, clearance angle, tolerance class, fastening and thickness; the 3.18 mm plate thickness and holeless design ensure a positive fit in appropriate clamping systems. The insert is intended to be used with a matching external holder or boring bar plus backing shim/clamp and replacement screws, enabling straightforward replacement and minimal set-up time on established turning centres. Application benefits and recommended use cases Designed specifically for turning operations in aluminium and other non-ferrous materials, this PCD insert excels in abrasive non-metals where elevated cutting speeds and tool life are decisive. The carbide substrate gives mechanical support for the diamond layer, maintaining edge strength under intermittent cuts. For stable setups and appropriate feeds, the insert offers long-term economy thanks to reduced tooling consumption and consistent part quality. Contact Metav Werkzeuge for tailored advice on integrating the TPGN 160308 DX140 into existing turning processes or to request availability and delivery options; phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: 6808854 Manufacturer SKU: TUN6808854 Model series: ISO-Drehwendeschneidplatten ISO designation: TPGN160308 Numbers / Core technical data Insert size: 16 mm Plate thickness: 3.18 mm Corner radius: 0.8 mm Clearance angle: 11° Included angle: 60° Designs / Special features Material: carbide substrate Cutting material: polycrystalline diamond (PCD) Grade: DX140 Shape: triangular Hole: without hole Chipbreaker: none Application: turning Typical use: aluminium and non-ferrous metals Compatibility: ISO-format holders; requires matching clamp and screws FAQ What materials is this insert suitable for? The TPGN 160308 DX140 insert is optimised for aluminium, non-ferrous metals and abrasive non-metals thanks to its PCD cutting layer and carbide backing. Can this insert be used in standard ISO turning holders? Yes, the insert follows ISO geometry and fits ISO-format external holders when matched by form, clearance angle and thickness; ensure the holder accepts a triangular, holeless insert. Does the insert include a chipbreaker? This grade is supplied without a chipbreaker, so chip control is managed via cutting parameters and holder orientation for the intended materials. What edge preparations are available for consistent profiles? The 0.8 mm corner radius provides a reliable profile edge for turning tasks requiring repeatable contours and improved surface quality. How does the DX140 grade affect tool life? DX140’s polycrystalline diamond structure offers very high wear resistance, which translates into extended tool life at elevated cutting speeds on suitable materials. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPGN 160308 GH110 Wendeplatten - Tungaloy
The combination of GH110 carbide grade and a 0.8 mm corner radius delivers a balance of wear resistance and edge stability for productive turning. ISO conformity and a standard 60° triangular form ensure predictable holder compatibility and fast tool changes — order via Metav Werkzeuge or consult the specialists for application advice. TPGN160308 GH110 Tungaloy Turning Insert (ISO, 60°) The TPGN160308 GH110 is an ISO triangular indexable insert engineered for external and internal turning applications. ISO triangular turning insert TPGN160308 Tungaloy GH110 carbide grade 0.8 mm corner radius, 60° insert angle Suited for external and internal turning Increased production through controlled wear and edge stability The insert combines the GH110 composition with a carbide substrate to provide a dependable compromise between hardness and toughness. This results in extended tool life and consistent cutting behaviour even under interrupted or semi-continuous cuts. The geometry of the triangular insert supports three usable cutting edges, which contributes to economical operation by enabling quick indexing. By selecting this geometry and grade, shops benefit from fewer tool changes, reduced setup times and more predictable component tolerances — all factors that optimise machining throughput. Predictable clamping and simple integration into ISO systems As an ISO-compliant insert, compatibility with external holders is determined by form, relief angle (11°), tolerance class, fastening method, size and thickness. These standardised parameters permit reproducible clamping and minimise the need for bespoke adaptation. The 60° included angle and the specified 0.8 mm radius help to distribute cutting forces efficiently, lowering the risk of premature edge failure. This standardised approach simplifies tool inventory management and supports leaner production processes by reducing variation in fixture and holder selection. Practical use cases and selection guidance for machinists The triangular shape and the GH110 grade make the insert suitable where a balance between finish and edge robustness is required. The absence of an integral chipbreaker means the insert is best paired with a holder and chip control solution matched to the workpiece material and cutting conditions. A 0.8 mm corner radius typically delivers improved surface integrity over very small radii while maintaining adequate edge strength for semi-finishing and finishing passes. For uncertain applications or unusual materials, request cutting data and recommendations from Metav Werkzeuge; phone and e‑mail contact details are available for technical clarification. Contact Metav Werkzeuge for application advice and availability of Tungaloy TPGN160308 GH110 turning inserts; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Manufacturer article number: 6808847 SKU: 6808847-Tungaloy Manufacturer SKU: TUN6808847 Label: TPGN160308 GH110 Tungaloy-Wendeplatte Model series: ISO turning indexable inserts Core technical data Insert size: 16 mm Thickness: 3.18 mm Corner radius: 0.8 mm Relief angle: 11° Included angle: 60° Special features Material: carbide Grade: GH110 (Tungaloy) Shape: triangular Chipbreaker: none Hole: without hole Application: turning (external & internal) ISO standard insert compatibility FAQ What materials is this insert intended for? The GH110 grade is designed for general turning tasks; selection of chip control and cutting data should be matched to the workpiece material and machining method when using the TPGN160308 GH110 Tungaloy turning insert. How does the 0.8 mm corner radius affect performance? A 0.8 mm radius improves edge strength and surface finish balance, making the insert suitable for semi-finishing and finishing operations with reduced risk of edge chipping. Is the insert compatible with standard ISO holders? Yes, the insert follows ISO naming and dimensions; compatibility depends on form, relief angle, tolerance class, fastening and thickness of the chosen holder. How many cutting edges are available per insert? The triangular design provides three usable cutting edges, enabling economical indexing and reduced tooling cost per edge. Does this insert include a chipbreaker? This variant is supplied without an integral chipbreaker; chip control should be provided by an appropriate holder or by selecting a different insert geometry where chipbreaking is required. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPGN 160308 LX10 Wendeplatten - Tungaloy
Combining carbide construction, the LX10 wear-resistant grade and the ISO triangular form ensures stable edge life and predictable turning results; the compact geometry supports both external and internal turning operations. Order the TPGN160308 directly via Metav Werkzeuge or consult our specialists for application-specific recommendations. TPGN 160308 LX10 turning insert — Tungaloy carbide, ISO TPGN series TPGN160308 LX10 is an ISO‑standard indexable turning insert designed for general turning tasks, offering a balance of wear resistance and edge stability for industrial machining. ISO triangular insert TPGN160308 LX10 Carbide construction for robust cutting edges 11° relief angle for versatile turning Suitable for external and internal turning Consistent performance through an optimised grade The LX10 grade, supplied by Tungaloy and applied to a carbide body, is formulated to deliver wear resistance and maintain a stable cutting edge under cyclic loads. This raises process reliability in series production by reducing unexpected tool changes and improving repeatability. The insert’s triangular geometry and defined corner radius of 0.8 mm contribute to predictable chip formation and dimensional control during conventional and finishing passes, which supports higher machine uptime and consistent component quality. Practical compatibility and handling for workshop use Built to ISO standards, the insert fits holders that match form, relief angle, tolerance class, fastening, size and thickness. The nominal 11° relief angle and 3.18 mm plate thickness provide a balance between stiffness and edge access, enabling secure clamping and resistance to bending in off‑centre or extended overhang setups. Because the system is modular, the insert integrates into common holder families and replacement is straightforward, reducing set‑up time and simplifying inventory management for production environments. Clear selection criteria and machining benefits Selecting this insert focuses on two parameters: the LX10 grade for expected wear behaviour and the insert geometry for the required surface finish and stability. The 0.8 mm corner radius supports medium‑duty finishing and general turning, while the 60° included angle gives strength at the cutting edge for interrupted cuts. Where higher toughness or different chip control are needed, choosing an alternate grade or a chipbreaker geometry adapts the performance without changing the holder. The result is a predictable, cost‑effective solution that contributes to efficient metal removal and reliable workpiece quality. For assured productivity with Tungaloy’s LX10 grade and ISO TPGN geometry, contact Metav Werkzeuge for tailored application advice or to arrange procurement via eMail: info@metav-werkzeuge.com or phone: +49 2822 7131930 Technical Data Article number: 6836751 Manufacturer SKU: TUN6836751 Brand: Tungaloy Model series: ISO turning indexable inserts Product name: TPGN160308 LX10 Facts Insert size: 16 mm Thickness: 3.18 mm Corner radius: 0.8 mm Relief angle: 11° Included angle: 60° Special features Material: carbide Grade: LX10 (Tungaloy) Plate shape: triangular Chipbreaker: without Hole style: without hole Intended application: turning System components: insert, matching holder, clamp set, replacement screw (holders and screws as separate components) FAQ What machining tasks suit this insert? The TPGN160308 LX10 turning insert is designed for external and internal turning operations where a balance of wear resistance and edge stability is required. How does the LX10 grade affect tool life? The LX10 grade enhances wear resistance and edge stability on the carbide substrate, which typically extends service life under standard turning conditions compared with unoptimised grades. Which holders are compatible with this insert? Compatibility depends on holder form, relief angle, tolerance class, fastening and size; an ISO‑compliant TPGN holder that matches the 16 mm size and 3.18 mm thickness is required. Is there a chipbreaker on this insert? This variant is supplied without a chipbreaker; chip control should be achieved via cutting parameters, holder geometry or an alternative insert style if necessary. What corner radius and relief angle should be selected for finishing? The 0.8 mm corner radius and 11° relief angle of this insert suit medium finishing; for finer surface requirements a smaller radius or different grade may be preferable. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPGN 160308 LX11 Wendeplatten - Tungaloy
Take advantage of the ISO compatibility, robust LX11 cutting grade and precise 0.8 mm corner radius for stable machining and predictable tool life; order the insert directly via Metav Werkzeuge or consult the technical team for application-specific advice. TPGN 160308 LX11 Tungaloy indexable insert – ISO turning insert, 60° triangular geometry, 0.8 mm corner radius A TPGN 160308 LX11 ISO-format indexable insert engineered for external and internal turning, combining Tungaloy's carbide grade with ISO-compliant geometry for consistent performance in standard turning systems. ISO turning insert, 60° triangular geometry Tungaloy LX11 carbide grade for stable edge 0.8 mm corner radius for versatile finishing 3.18 mm plate thickness, holeless design Productive cutting through material-balanced grade The LX11 grade from Tungaloy was developed to balance wear resistance, toughness and edge stability, which directly improves process reliability in turning operations. By using a specifically engineered carbide composition, the insert sustains cutting forces and extends time between indexings. This material-oriented approach reduces unexpected tool changes and supports a more economical machining rhythm, particularly where repeatable surface quality and dimensional control are required. Geometry and clearance for predictable results A triangular insert with a 60° cutting angle and a 0.8 mm corner radius provides a compromise between strength and finishing capability: the acute geometry permits access in tighter contours while the modest radius helps produce consistent surface finishes without sacrificing edge life. The plate is manufactured to ISO dimensions with a 11° clearance angle and a 3.18 mm thickness, which ensures compatibility with standard holders when the holder form, tolerance class, fastening method, size and thickness are matched. Note that this insert is supplied without a chipbreaker, so selection of an appropriate chip control geometry and grade should be aligned with the workpiece material and machining conditions. Fast integration into ISO turning systems The insert follows the ISO turning insert system concept and is intended to be used together with a matching external holder or boring bar, plus the necessary shim/clamping set and replacement clamping screws. This modular setup means that the indexable insert can be integrated into existing tool assemblies with minimal adaptation when the holder specification corresponds to the insert geometry. Using standardised mounting elements reduces setup time and enables straightforward replacement during production, supporting higher machine uptime and simplified tool inventory management. Application advice and reliable handling Designed primarily for turning tasks, the insert supports both external and internal operations when fitted in the correct holder. The Tungaloy carbide grade enhances process stability and is suitable where a balance of abrasion resistance and fracture toughness is required. Since chip control is not integrated, users are advised to pair the plate with an appropriate chipbreaker or choose a holder geometry adapted to the machining strategy. For projects requiring reproducible surface quality and steady production runs, the combination of ISO conformity and the LX11 grade helps achieve consistent results with reduced rework. For application-specific recommendations and availability of the TPGN 160308 LX11 Tungaloy indexable insert, contact Metav Werkzeuge for technical advice and ordering: info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: 6808848 Manufacturer SKU: TUN6808848 Model series: ISO turning indexable inserts Material: carbide (Hartmetall) Facts Geometry: triangular, 60° Corner radius: 0.8 mm Plate thickness: 3.18 mm Clearance angle: 11° Plate size: 16 mm Hole: none Special features Grade: LX11 (Tungaloy carbide grade) No integrated chipbreaker ISO-standardised insert for turning Compatibility determined by form, clearance angle, tolerance, fastening, size, thickness System components: insert + suitable holder or boring bar + shim/clamping set + spare screws FAQ What turning operations is this insert suited for? The TPGN 160308 LX11 insert is intended for both external and internal turning when used in a compatible ISO holder; machining strategy and chip control should be chosen according to the workpiece material. Is a chipbreaker included with the insert? No, this insert is supplied without a chipbreaker; chip control must be provided via a matching holder geometry or by selecting an alternative insert with an integrated breaker. How does the LX11 grade affect tool life? The LX11 carbide grade emphasises a balance of wear resistance and toughness, which contributes to stable cutting-edge behaviour and extended intervals between indexings under suitable cutting parameters. Which holder features must be matched for correct assembly? Holder compatibility is determined by the insert form, clearance angle (11°), tolerance class, fastening method, size and thickness; ensure the holder specification matches the ISO insert dimensions. What is the corner radius and how does it influence surface finish? The insert has a 0.8 mm corner radius; this provides a compromise between strength and surface finish capability, supporting versatile finishing without overly compromising edge life. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPGN 160308 NS9530 Wendeplatten - Tungaloy
Benefit from a finishing-grade insert that combines ISO compatibility, an NS9530 uncoated cermet edge and a 0.8 mm corner radius for superior surface quality in continuous turning; order directly via Metav Werkzeuge or consult the specialists for application advice. TPGN 160308 NS9530 – ISO turning insert (triangular), finishing grade by Tungaloy TPGN160308 NS9530 is an ISO triangular turning insert intended for fine finishing in external and internal turning applications, designed to deliver low cutting forces and excellent surface quality. ISO triangular insert for standard holders Uncoated cermet NS9530 for high surface finish 60° geometry for precise turning 0.8 mm corner radius for fine finishing Superior finishing performance with NS9530 The insert is built on an uncoated cermet grade, NS9530, specifically formulated as a finishing sort for steel. This composition provides a sharp cutting edge and reduced friction compared with some coated grades, which translates into lower cutting forces and a cleaner, more consistent surface finish during continuous cuts. For operations where minimal tool marks and tight surface tolerances are critical, the combination of cermet substrate and a fine edge geometry supports predictable, repeatable results and can reduce rework or downstream polishing. The finishing behaviour of this grade also helps to maintain dimensional integrity when small depths of cut are used. Reliable ISO fit and controlled geometry for process stability The insert follows ISO designation standards, so form and tolerance match established holder interfaces; compatibility is determined by the insert shape, 11° clearance angle, tolerance class, fastening method, size and thickness. The triangular form with a 60° included angle and a corner radius of 0.8 mm is particularly suited to finishing passes where controlled contact and gentle entry reduce vibration and leave a consistent profile. The 3.18 mm plate thickness contributes to rigidity while the absence of a centre hole simplifies clamping arrangements in holders designed for solid-pocket retention. Understanding these geometric parameters enables straightforward selection of an appropriate external holder or turning bar to secure cutting stability and repeatable chip formation. Practical system guidance and application advantages The cutting system is composed of the indexable insert, a matching external holder or boring bar, a seating pad/clamping kit and replacement screws; ensure holders are matched to the insert’s ISO outline and thickness for correct clamping. As a finishing grade, the insert excels in both external and internal turning where continuous cutting and modest feed rates are used. Selection of a suitable chipbreaker or a different grade should be considered when encountering interrupted cuts or heavier machining requirements. The base material for the substrate is carbide, offering the balance of toughness and edge integrity needed for repeatable finishing tasks. Using this configuration reduces the likelihood of built-up edge and supports consistent productivity across series production. For precision finishing with the Tungaloy NS9530 finishing grade, contact Metav Werkzeuge for availability and tailored application advice at info@metav-werkzeuge.com or call +49 2822 7131930. Technical Data Article number: 6998031 SKU: 6998031-Tungaloy Manufacturer SKU: TUN6998031 Type designation: TPGN160308 Data ISO code: 160308 Insert size: 16 mm Thickness: 3.18 mm Corner radius: 0.8 mm Clearance angle: 11° Included angle: 60° Special features Cutting grade: NS9530 — uncoated cermet Substrate material: carbide Plate shape: triangular Hole style: without hole Intended application: turning (external and internal) Typical system build: insert + holder or boring bar + seating/clamping set + screws Chipbreaker: none (select as required by application) Model series: ISO turning indexable inserts FAQ What materials is this insert suited for? The TPGN160308 NS9530 insert is a finishing grade developed for steel; its uncoated cermet composition provides a sharp edge and low cutting forces particularly favourable for continuous finishing cuts on steel. How does the NS9530 grade affect surface finish? NS9530’s uncoated cermet structure promotes a fine cutting edge and stable cutting behaviour, so the insert produces consistently high surface quality when used with appropriate feeds and depths of cut. Which holders are compatible with this ISO insert? Compatibility depends on the holder’s form, clearance, tolerance class, fastening method, size and thickness; choose an ISO-compatible external holder or boring bar designed for triangular TPGN 160308 geometry and 3.18 mm thickness. Is this insert suitable for interrupted cuts? As a finishing sort, the insert performs best in continuous cuts; for interrupted cutting or heavy roughing, consider a different chipbreaker or a tougher grade better suited to variable engagement. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPGN 160308 TH10 Wendeplatten - Tungaloy
Benefit from the combination of precise ISO geometry, a sharp TH10 uncoated carbide grade and a compact 0.8 mm corner radius for consistent, low-force turning and fine surface finishes; order the insert directly via Metav Werkzeuge or request application support from the consultants. TPGN 160308 TH10 indexable turning insert by Tungaloy — triangular, 60° geometry TPGN 160308 TH10 is an ISO-standard triangular indexable insert designed for external and internal turning applications, offering a sharp, uncoated carbide grade for low cutting forces and clean surfaces. ISO-standard triangular insert, 60° included angle TH10 uncoated carbide for non-ferrous metals 0.8 mm corner radius for fine finishes 3.18 mm plate thickness, no hole, no chipbreaker Greater efficiency through geometry and grade The combination of a 60° triangular form and the TH10 sharp grade reduces cutting forces and stabilises chip flow in non-ferrous machining. The uncoated carbide cutting edge requires less cutting energy compared with many coated alternatives, which translates into lower spindle loads and reduced heat generation. For productive turning operations, this results in steadier tool life and improved surface quality on aluminium, copper alloys and similar materials. The design supports both roughing with controlled material removal and finishing cuts where a fine surface is required. Easy integration and reduced setup time The insert follows ISO-standard dimensions, so compatibility with matching holders is determined by form, clearance angle, tolerance class, fixing and size; this simplifies tool provisioning and reduces inventory complexity. The specification for form and thickness allows straightforward replacement in standard external holders or boring bars, while the reproducible geometry ensures repeatable results across batches. Clear, standardised interfaces lead to shorter machine downtime during tool changes and easier qualification of cutting data for series production. Stable clamping and surface finish control With a 0.8 mm corner radius and 3.18 mm plate thickness, the insert balances edge strength and surface finish capability. The modest corner radius is suited to delivering fine finishes without compromising edge life for light- to medium-duty cuts. The thicker plate contributes to secure clamping in the seat and helps maintain rigidity during interrupted cuts. As the insert is supplied without a chipbreaker, the selection of an appropriate chip control geometry for the specific material and machining conditions is recommended to optimise swarf evacuation and tool life. Application considerations and material suitability The grade is optimised for non-ferrous work and situations where a clean cutting edge is required; the TH10 uncoated carbide excels on softer, gummy alloys and where low built-up edge tendency is important. Typical uses include external turning of aluminium profiles, internal bore finishing of brass components and light-duty contouring on copper alloys. For harder or abrasive materials, alternative grades or coatings should be considered. The system approach—insert, suitable external holder or boring bar, backing/clamping set and replacement screws—ensures a complete, reliable solution for workshop and production environments. Contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 for technical advice and availability of the Tungaloy TPGN 160308 TH10 indexable insert Technical Data Article number: 6808852 Manufacturer SKU: TUN6808852 SKU: 6808852-Tungaloy Model series: ISO indexable turning inserts Specifications ISO designation: TPGN160308 Plate shape: triangular Plate size: 16 Plate thickness: 3.18 mm Corner radius: 0.8 mm Included angle: 60° Clearance angle: 11° Materials & Features Material: carbide Grade/coating: TH10 (uncoated) Hole: without hole Chipbreaker: without chipbreaker Primary application: turning Typical use: external and internal turning; selection of chipbreaker and grade per workpiece material and stability Compatibility: holder determined by form, clearance, tolerance, fixing, size and thickness FAQ Which materials is this insert suitable for? The TH10 uncoated carbide grade is designed primarily for non-ferrous materials; the TPGN160308 insert by Tungaloy performs well on aluminium, brass and similar alloys where a sharp, clean cutting edge is beneficial. Is the insert supplied with a chipbreaker or hole? The insert is supplied without a chipbreaker and without a hole; the absence of an integrated chip control means the appropriate chip management must be chosen at the holder or process level for the intended application. What are the key dimensions to check for holder compatibility? Check the ISO designation TPGN160308, the triangular plate form, the 16 mm size, 3.18 mm thickness and 60° included angle to ensure correct fit with the chosen external holder or boring bar. How does the 0.8 mm corner radius affect finishes and cutting forces? A 0.8 mm corner radius helps achieve fine surface finishes while maintaining sufficient edge strength for light to medium cuts, reducing the risk of edge chipping under typical non-ferrous turning conditions. Can this insert be used for internal boring as well as external turning? Yes, the insert is suitable for both external and internal turning operations provided the correct holder and process parameters are used; the ISO geometry supports interchangeability across standard toolholders. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPGN 160312 LX10 Wendeplatten - Tungaloy
Take advantage of the combination of ISO‑standard geometry, LX10 grade wear resistance, and a robust 1.2 mm corner radius to maintain steady, repeatable turning results; order the insert directly via Metav Werkzeuge or ask our consultants if needed. TPGN 160312 LX10 Tungaloy indexable insert for turning (triangle, 60°) TPGN 160312 LX10 is an ISO‑standard triangular indexable insert intended for external and internal turning, offering a balanced combination of wear resistance and edge stability for productive metalcutting. ISO‑standard triangular insert 60° geometry LX10 grade for balanced wear resistance 1.2 mm corner radius for robust cutting Suitable for external and internal turning Consistent cutting thanks to defined geometry and size The triangular 60° geometry and standardised form provide a predictable cutting position in many turning setups. With an inscribed circle of 16 mm and a plate thickness of 3.18 mm, the design ensures consistent contact with compatible external holders and boring bars. These dimensional standards reduce setup variation and simplify tool selection across mixed production runs, supporting stable process parameters and repeatable quality in serial machining. LX10 grade: balanced wear resistance and edge stability The LX10 carbide grade from Tungaloy combines wear resistance with sufficient toughness to protect cutting edges during interrupted cuts or variable feeds. This balance helps to maintain surface finish and dimensional accuracy over extended tool life. For operations where both steady flank wear and occasional edge shocks occur, the LX10 grade provides a dependable compromise between life expectancy and edge reliability. Practical benefits for turning operations and material choices Designed primarily for turning, the insert performs well across a broad spectrum of steels and general workshop materials when matched with the appropriate geometry and holder rigidity. The absence of a chipbreaker makes the insert suitable where chip control is managed by process parameters or specialised holders. Selecting the right insert geometry and grade reduces rework, shortens cycle times and contributes to more predictable tool change intervals. System compatibility and handling guidance Compatibility with a clamping system depends on form, clearance angle, tolerance class, fixation method, size and thickness. The TPGN 160312 format adheres to ISO norms, easing selection of matching external holders or boring bars. When integrating into an existing tool system, confirm seat fit and clamp type; correct mounting prevents micro‑movement, preserves edge stability and optimises tool life without compromising component tolerances. For personalised application advice or to order Tungaloy indexable inserts directly from Metav Werkzeuge, contact our technical consultants at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitability and lead times. Technical data Article number: 6852226 Manufacturer SKU: TUN6852226 Series: ISO‑Drehwendeschneidplatten Application: Turning Corner radius: 1.2 mm Plate size (inscribed circle): 16 mm Thickness: 3.18 mm Clearance angle: 11° Geometry angle: 60° Grade: LX10 (Tungaloy) Material: carbide Chipbreaker: none Hole: none Plate form: triangular FAQ What materials is this insert suited for? The TPGN 160312 LX10 insert is formulated for general turning tasks and, when matched to the correct geometry and process, is suitable for a broad range of steels and workshop materials. Does the insert include a chipbreaker? No, this insert is supplied without a chipbreaker; chip control must be achieved through process parameters or an appropriate holder. Which holders are compatible with this insert format? Compatibility depends on holder form, clearance angle, tolerance class, fixation and thickness; the TPGN 160312 format follows ISO standards to simplify matching with common external holders and boring bars. What does the LX10 grade offer compared with other grades? The LX10 grade provides a balance between wear resistance and toughness, enhancing edge stability and consistent performance in variable turning conditions. Is this insert suitable for internal turning? Yes, the triangular 60° geometry and ISO dimensions allow use in both external and internal turning applications provided the correct boring bar and clamping are used. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPGN 160312 LX11 Wendeplatten - Tungaloy
Take advantage of the combination of robust LX11 grade, precise 60° geometry and a 1.2 mm corner radius for stable, repeatable turning results; order directly via Metav Werkzeuge or request guidance from our consultants to ensure the correct holder and chipbreaker selection. TPGN 160312 LX11 indexable turning insert for turning — Tungaloy TPGN160312 LX11 is an ISO-format triangular turning insert designed for ISO-compliant external and internal turning applications, offering wear-resistant carbide performance in a compact 16 mm size. ISO triangular insert TPGN160312 LX11 Tungaloy carbide grade 1.2 mm corner radius 11° clearance angle, 60° geometry Consistent cutting-edge performance for productive turning The LX11 carbide grade, supplied by Tungaloy, combines wear resistance and fracture toughness to support stable cutting in a range of turning operations. The grade complements the insert geometry to deliver consistent edge life and predictable wear behaviour, reducing the need for frequent interruptions. As an indexable insert, this component simplifies reconditioning and inventory management compared with brazed tools, enabling continuous production and better cost control. Geometry tuned for accuracy and surface quality The triangular 60° geometry with a 1.2 mm corner radius provides a balance between strength and finishing capability. The 11° clearance angle minimises rubbing while maintaining edge support for a controlled chip flow, which helps to achieve uniform surface quality on both external and internal profiles. These geometric parameters make the insert particularly suitable where a compact tool nose and repeatable contouring are required. ISO compatibility and straightforward integration Built to the ISO-DIN form standard for turning inserts, the component ensures simple integration with compatible toolholders and boring bars. Compatibility is governed by insert form, clearance angle, tolerance class, fastening method, size and thickness; matching these parameters secures correct seat fit and clamping stability. The system approach—insert, holder, pad/locking set and spare screws—allows shops to standardise toolholding and reduce setup variability. Practical selection advice for industrial workshops The insert is made of carbide, designed for turning tasks where wear resistance and edge stability are priorities. The absence of a predefined chipbreaker means the final chip control strategy should be chosen according to workpiece material, operation and machine stability; selecting a suitable chipbreaker geometry or an alternative grade where required will optimise machining performance. For applications requiring high reproducibility, the ISO-format insert supports quick index changes and inventory-friendly stocking. For product availability, technical matching or application recommendations contact Metav Werkzeuge — Metav Werkzeuge GmbH can advise on the Tungaloy LX11 insert (SKU 6808856-Tungaloy) and recommend the appropriate holder, chipbreaker and delivery options via info@metav-werkzeuge.com or +49 2822 7131930. Technical data Article number: 6808856 SKU: 6808856-Tungaloy Manufacturer SKU: TUN6808856 Model series: ISO-Drehwendeschneidplatten Material: carbide Core dimensions Insert designation: TPGN160312 Geometry angle: 60° Corner radius: 1.2 mm Clearance angle: 11° Plate thickness: 3.18 mm Plate size: 16 mm Plate shape: triangular Hole: no hole Grade: LX11 Features & compatibility ISO-compliant turning insert Intended use: turning Chipbreaker: without chipbreaker Compatibility depends on holder form, clearance angle, tolerance class, fastening, size and thickness System components: insert, holder or boring bar, pad/locking set, spare screws FAQ What operations is this insert designed for? This indexable turning insert is designed for external and internal turning; the TPGN160312 LX11 insert from Tungaloy is intended for general turning where wear resistance and edge stability are required. Which toolholders are compatible with this ISO-format insert? Compatibility depends on the holder's insert pocket dimensions and clamping method; ensure the holder matches the ISO triangular form, size 16, thickness 3.18 mm and the 60° geometry for correct fit with the TPGN160312 LX11 insert. Does the insert include a chipbreaker or coating? The delivered version is specified without a chipbreaker; LX11 refers to the carbide grade rather than a coating. Chip control should be selected according to workpiece material and machining conditions. How is the corner radius relevant to finishing operations? A 1.2 mm corner radius balances edge strength and surface finish capability, providing robustness for profile turning while still allowing good surface quality when used with appropriate feed rates and machine stability. What information is needed to select the correct insert and grade? Provide the workpiece material, required surface finish, machine stability and the intended operation (roughing or finishing); Metav Werkzeuge can then advise whether the TPGN160312 LX11 insert is suitable or if an alternative chipbreaker or grade is preferable. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPGN 220404 TH10 Wendeplatten - Tungaloy
The combination of an ISO‑standard triangular geometry, an uncoated cemented‑carbide TH10 grade and a 0.4 mm nose radius delivers low cutting forces and consistently clean surfaces in turning tasks. Order the insert directly via Metav Werkzeuge or consult our specialists for application recommendations. TPGN 220404 TH10 — indexable turning insert for Turning, uncoated cemented carbide — Tungaloy A TPGN220404 TH10 indexable insert designed for ISO‑standard external and internal turning, optimised for non‑ferrous materials and operations that benefit from a sharp, uncoated cutting edge. ISO‑standard triangular insert TPGN 220404 Uncoated cemented carbide TH10 grade 11° clearance angle for low cutting forces 0.4 mm nose radius for fine surface finish Achieve efficient, low‑force turning of non‑ferrous components The uncoated cemented carbide composition of this grade is selected to minimise built‑up edge and reduce friction during machining, which in turn promotes low cutting forces and improved tool response. The TH10 grade provides a balance between sharpness and wear resistance, making it suitable where a clean contact area and minimal burr formation are decisive. For shops processing aluminium, brass or other non‑ferrous alloys, this insert helps maintain cycle times while producing consistent finishes and reducing rework. Quick integration with existing tool systems for dependable results As an ISO‑standard geometry, the insert integrates easily into standard toolholders; compatibility is determined by form, 11° clearance angle, tolerance class, fastening method, size and thickness. The triangular shape and 60° included angle ensure predictable cutting directions and simple indexing. The 0.4 mm nose radius supports fine surface quality without compromising edge strength. When retrofitting or specifying a holder, consider the matching external holder or boring bar, plus the appropriate shim/clamp set and spare screws for secure clamping and repeatable positioning. Improve productivity through a stable cutting edge and system thinking Using a sharp, uncoated cutting edge reduces the need for high cutting temperatures and aggressive coatings when machining non‑ferrous materials; this realises both efficiency and process reliability. The insert is intended for external and internal turning and forms part of a compact system build—indexable insert, compatible holder, clamp and spare fasteners—that supports fast changeovers and minimal downtime. For complex setups or unusual materials, Metav Werkzeuge offers application guidance to evaluate tool life expectations and the most productive machining parameters. For reliable turning with a sharp TH10 edge, request application advice or place an order through Metav Werkzeuge at info@metav-werkzeuge.com or by phone on +49 2822 7131930. Technical Data Article number: 6808862 SKU: 6808862-Tungaloy Manufacturer SKU: TUN6808862 Model series: ISO turning indexable inserts Material: Cemented carbide Grade: TH10 ISO designation: TPGN220404 Plate form: triangular Plate size: 22 mm Plate thickness: 4.76 mm Hole: without hole Included angle: 60° Clearance angle: 11° Nose radius: 0.4 mm Application: Turning Manufacturer: Tungaloy Facts Nose radius: 0.4 mm Plate thickness: 4.76 mm Plate size: 22 mm Included angle: 60° Clearance angle: 11° Special features Uncoated cemented carbide Grade TH10 No chipbreaker Triangular insert, ISO TPGN220404 Compatibility depends on form, clearance, tolerance class, fastening, size and thickness System build: insert, compatible external holder or boring bar, shim/clamp set, spare screws Suitable for turning, especially non‑ferrous materials FAQ Which materials is this insert best suited for? The TPGN220404 TH10 insert is optimised for non‑ferrous materials such as aluminium and brass; the uncoated cemented‑carbide edge promotes low cutting forces and cleaner surfaces. Is the insert supplied with a chipbreaker? No, this variant is specified without a chipbreaker, which maintains a sharp, continuous cutting edge suited to low‑force turning tasks. What determines compatibility with a toolholder? Compatibility is set by the insert form, clearance angle, tolerance class, fastening type, size and thickness; a matching external holder or boring bar and the correct shim/clamp set are required for secure clamping. What are the key dimensions to check when specifying the insert? Key dimensions include the 22 mm plate size, 4.76 mm plate thickness, 60° included angle and a 0.4 mm nose radius for surface finish considerations. Is the cutting edge coated? No, the Tungaloy TPGN220404 TH10 is an uncoated cemented‑carbide grade designed to perform where a sharp, uncoated edge is advantageous. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com