TPGM 110204 UX30 Wendeplatten - Tungaloy
Robust UX30 cutting geometry and an uncoated carbide substrate ensure low cutting forces and consistent chip formation; the ISO triangular form with a 60° included angle and a 0.4 mm corner radius provides accurate profile control for both external and internal turning. Order the insert directly via Metav Werkzeuge or consult our specialists for grade and holder matching. TPGM 110204 UX30 Tungaloy indexable insert — triangular 60°, uncoated carbide for turning TPGM 110204 UX30 is an ISO triangular indexable insert designed for general turning operations, providing a sharp cutting edge for low cutting forces and reliable chip control. Sharp UX30 cutting edge for low cutting forces ISO triangular 60° form for versatile turning Cylindrical-hole mount for secure positioning 0.4 mm corner radius for fine profile control Consistent chip control that improves process stability The insert delivers predictable chip formation thanks to the UX30 grade and its uncoated carbide substrate, which together reduce cutting resistance and heat generation during continuous turning. The single-sided chipbreaker geometry promotes short, controllable chips when machining a wide range of materials, helping to maintain cycle times and reduce machine downtime. This performance is particularly beneficial where stable tool life and repeatable surface finish are required, translating directly into improved throughput for production turning tasks. Secure clamping and ISO compatibility for rapid tool changes An ISO-compliant triangular form with a cylindrical hole and standard tolerances ensures compatibility with a broad range of clamping systems and external holders. The 60° included angle and 11° clearance simplify seat geometry checks and reduce setup time when replacing inserts across different toolholders. Because the insert follows ISO norms for dimensions and hole style, changeover is straightforward and repeatable, supporting efficient tool management in batch production and mixed-series workshops. Grade selection and application guidance for optimal results The uncoated UX30 grade is formulated for operations where a sharp cutting edge and good chip control are priorities rather than extreme wear resistance. The small 0.4 mm corner radius is suited to finishing and light-medium turning, producing accurate profiles and fine surface finishes with reduced cutting forces. For heavier roughing cuts or harder materials, a different grade or a larger corner radius would be recommended; this insert excels where low cutting resistance and consistent chip breaking are decisive selection criteria. Operational benefits for everyday turning operations Using this triangular indexable insert in a correctly matched holder and clamping set delivers reliable part geometry and surface quality across external and internal turning tasks. The modest plate thickness and precise ISO geometry mean predictable strength and clearance characteristics under typical cutting parameters. Combined with an organised insert inventory and consistent grade selection, workshops achieve cost-efficient production with reduced scrap rates and easier process control, improving overall manufacturing reliability. For procurement and technical advice on Tungaloy turning inserts, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss holder compatibility and optimal grade choice. Technical data Article number: 6808801 Manufacturer SKU: TUN6808801 Our SKU: 6808801-Tungaloy ISO designation: TPGM110204 Core specifications Corner radius: 0.4 mm Thickness: 2.38 mm Inscribed circle / size: 11 mm Clearance angle: 11° Included angle: 60° Hole style: cylindrical hole Materials & features Material: carbide (uncoated) Grade: UX30 Chipbreaker: one-sided Plate form: triangular Mounting: with cylindrical hole Intended use: turning Series: ISO turning indexable inserts FAQ What applications are best suited for this triangular insert? This triangular indexable insert is intended for external and internal turning where a sharp cutting edge and controlled chip formation are required; the UX30 grade and the 0.4 mm corner radius make it suitable for finishing and light to medium turning operations. Is the insert compatible with standard ISO holders? Yes, the ISO designation TPGM110204 and the cylindrical-hole mounting ensure compatibility with holders designed for ISO triangular turning inserts; proper matching of form, clearance and tolerance class remains essential. Which materials can be machined reliably with this grade? The uncoated UX30 carbide insert performs well on a broad range of common engineering materials where low cutting forces and good chip control are priorities; for highly abrasive or very hard materials, a different grade may be preferred. How does the 0.4 mm corner radius affect surface finish? A 0.4 mm corner radius provides fine profile control and contributes to a smooth surface finish in finishing and light cutting operations, while maintaining low cutting forces. What is the manufacturer article number and SKU for ordering? The manufacturer article number is 6808801 and the product is listed under SKU 6808801-Tungaloy; the manufacturer SKU is TUN6808801. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPGM 110302 NS9530 Wendeplatten - Tungaloy
Take advantage of a finishing-grade, uncoated cermet NS9530 with a precise 0.2 mm corner radius and 11° clearance for low cutting forces and superior surface quality; order the insert directly via Metav Werkzeuge or consult our specialists for selection support. TPGM110302 NS9530 Tungaloy turning insert – ISO triangular finishing insert, 0.2 mm radius The TPGM110302 NS9530 is an ISO-pattern triangular turning insert intended for finishing operations on steel, offering a sharp cutting edge for continuous cuts and high surface quality. Uncoated cermet NS9530 finishing grade 0.2 mm corner radius for fine finishing 11° clearance angle for low cutting forces Triangular ISO plate with cylindrical hole Superior surface quality for finishing applications The grade is an uncoated cermet (NS9530) formulated for finishing of steel, delivering a sharp cutting edge that reduces ploughing and limits cutting forces. This results in improved dimensional control and a predictable surface texture after light passes. For operations requiring consistent small depths of cut, the combination of the fine 0.2 mm corner radius and the cermet’s high hardness minimises edge deformation and helps achieve repeatable part accuracy with fewer rework cycles. Reliable ISO compatibility and simple integration Designed to ISO dimensions, the insert guarantees predictable fitment when matched with compatible tooling systems; compatibility is determined by form, clearance angle, tolerance class, fastening method, size and thickness. The plate is triangular with a cylindrical hole and a thickness of 3.18 mm, so matching clamping sets and screws assures stable seating and repeatable clamping forces. This standardisation reduces setup time and supports swift tool changes on production lines, improving throughput without compromising process stability. Productivity benefits through stable cutting behaviour Equipped with a single-sided chipbreaker, the insert is optimised for continuous cuts and light finishing passes, promoting consistent chip formation and evacuation. The resulting lower cutting forces help to reduce vibration and improve tool life at the finishing stage, while the cutting geometry contributes directly to a refined surface finish. For external and internal turning where surface integrity and low tool influence are priorities, this cutting grade delivers both performance and predictability. Practical mounting and application notes Key dimensions—11 mm inscribed circle, 60° included angle, 11° clearance—define the insert’s suitability for fine turning operations and determine the appropriate holder geometry. The plate is supplied with a cylindrical hole for positive mechanical location; ensure the correct clip or clamp and replacement screws are used to maintain repeatable seating. The product is listed under article number 6998016 and is available with manufacturer SKU TUN6998016 for straightforward ordering and stock control. Contact Metav Werkzeuge today to request advice on integrating the Tungaloy NS9530 finishing insert into existing toolsets or to place an order through our specialists Technical data Article number: 6998016 SKU: 6998016-Tungaloy Manufacturer SKU: TUN6998016 Model series: ISO-Drehwendeschneidplatten Core specifications Corner radius: 0.2 mm Clearance angle: 11° Thickness: 3.18 mm Inscribed circle: 11 mm Included angle: 60° ISO code: 110302 Features and applications Grade: NS9530 (uncoated cermet) Chipbreaker: single-sided Shape: triangular with cylindrical hole Application: turning – external and internal finishing Compatibility: ISO insert; holder fit depends on form, clearance, tolerance, fastening, size and thickness FAQ What materials is this insert intended for? The TPGM110302 NS9530 is a finishing-grade uncoated cermet developed primarily for steel machining and is particularly suited to continuous, light-depth finishing cuts. Can the insert be used for both external and internal turning? Yes, the insert’s triangular ISO form and chipbreaker design make it suitable for both external and internal turning when mounted in the correct holder configuration. How does the 0.2 mm corner radius affect performance? A 0.2 mm corner radius provides a fine edge that supports high surface quality and low cutting forces in finishing passes, reducing the need for secondary finishing operations. Which identifiers should be referenced when ordering or checking stock? Order using article number 6998016 or SKU 6998016-Tungaloy; the manufacturer SKU TUN6998016 may also be required for internal procurement. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPGM 110302 NS9530 Wendeplatten - Tungaloy
Take advantage of the combination of a sharp finishing edge, uncoated cermet NS9530 and reliable ISO compatibility for high-quality steel turning; order original stock through Metav Werkzeuge or consult their specialists for holder and chipbreaker selection. TPGM110302 NS9530 — ISO triangular turning insert, uncoated cermet, Tungaloy The TPGM110302 NS9530 is an ISO-standard triangular insert designed for finishing operations in turning, suitable for external and internal steel machining with small depths of cut. Uncoated cermet NS9530 finishing grade Sharp cutting edge for high surface finish 11° clearance for stable cutting 0.2 mm corner radius for fine profiles Precise finishing performance for steel turning The uncoated cermet grade NS9530 is formulated for finishing, delivering a sharp cutting edge and reduced cutting forces that produce superior surface quality on steel. As an ISO triangular insert, the component provides predictable geometry and indexing options; the combination of a small 0.2 mm corner radius and a fine cutting edge makes it particularly suitable for continuous, low-depth cuts where surface integrity is critical. For users less familiar with cutting materials, cermet offers a balance of hardness and tribological behaviour that favours smooth finishes over aggressive metal removal. Efficiency gains and practical machining benefits Because the grade is optimised for finishing, the insert helps to decrease secondary operations and polishing time, contributing to a more efficient workflow. The low cutting forces associated with this grade reduce chatter risk and tool vibration, which in turn supports dimensional stability and repeatable quality. Selecting an appropriate chipbreaker and matching holder will maintain this performance; for many setups a stable clamping arrangement and consistent feed will be sufficient to exploit the benefits of the grade in both single-part production and small-batch series. Compatibility and secure assembly in the tool system Compatibility with toolholders depends on insert form, 11° clearance, tolerance class, clamping method, size and thickness. This insert features a cylindrical hole and a single-sided chipbreaker, enabling secure retention when used with the correct shim or clamp set and replacement screws. The ISO designation simplifies holder selection but checking the holder geometry and tolerance class remains essential. When mounted correctly, the secure clamping and triangular shape with a 60° included angle ensure stable cutting conditions and straightforward indexing when an edge is worn. Recommended applications and handling guidelines Ideal for machinists and production teams focused on precision finishing, the insert is primarily aimed at turning tasks where surface finish and low cutting forces matter. The grade is best applied to continuous cuts and small depths of cut; it is not intended for heavy interrupted cuts or applications requiring aggressive stock removal. Indexing the triangular insert extends tool life economically, and choosing a chipbreaker matching material, cut depth and machine rigidity will preserve the fine cutting edge and the desirable surface outcomes. Contact Metav Werkzeuge to discuss the Tungaloy finishing grade NS9530, confirm holder compatibility and secure original inserts for immediate delivery via Metav Werkzeuge's sales team Technical data Manufacturer article number: 6998015 Manufacturer SKU: TUN6998015 Item designation: TPGM110302 Item name: TPGM110302 NS9530 Tungaloy-Wendeplatte Model series: ISO-Drehwendeschneidplatten Core specifications Included angle: 60° Plate size: 11 mm Thickness: 3.18 mm Clearance angle: 11° Corner radius: 0.2 mm Special features Uncoated cermet grade NS9530 Single-sided chipbreaker Cylindrical hole for clamping Triangular plate shape (ISO TPGM) ISO-standard turning insert Application: turning (Drehen) Compatibility determined by holder form, clearance, tolerance, clamp, size and thickness FAQ What applications suit this insert best? The TPGM110302 NS9530 insert by Tungaloy is designed for finishing in turning operations, especially external and internal steel turning with continuous cuts and small depths of cut. How is the insert secured in the toolholder? The insert uses a cylindrical hole and is retained by the appropriate clamp or shim set; proper clamping ensures secure retention of the TPGM110302 NS9530 and stable cutting conditions. What benefits does the NS9530 grade deliver compared with coated carbides? NS9530, an uncoated cermet grade, provides a sharp cutting edge and improved surface finish for finishing tasks; the grade reduces cutting forces and often reduces the need for subsequent finishing. Is the insert indexable and how many cutting edges are available? As a triangular ISO insert, the TPGM110302 offers multiple edges for indexing; rotating to a fresh corner extends usable tool life while keeping consistent geometry. Which holders and chipbreakers are recommended? Selection depends on holder form, tolerance class and the intended stability of the setup; Metav Werkzeuge can advise on matching holders and chipbreakers for the Tungaloy finishing grade and the SKU TUN6998015. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPGM 110302 TH10 Wendeplatten - Tungaloy
Take advantage of the combination of ISO compatibility, a sharp uncoated carbide grade and a fine 0.2 mm nose radius for consistent, low-force turning and clean surface finishes. Order the Tungaloy insert directly via Metav Werkzeuge or consult our experts for holder compatibility and optimal chipformer selection. TPGM 110302 TH10 indexable insert for turning by Tungaloy — triangular, 60° point angle, uncoated carbide The TPGM110302 TH10 is an ISO-standard triangular indexable insert designed for external and internal turning, offering a sharp uncoated carbide edge for low cutting forces and clean finishes Triangular ISO insert, 60° point angle TH10 uncoated carbide grade 0.2 mm nose radius for fine finishing Cylindrical-hole, 3.18 mm plate thickness Precise cutting with low forces for non-ferrous materials The insert is manufactured in an uncoated carbide grade TH10, engineered to provide a sharp edge that reduces cutting resistance and supports a clean surface on softer materials. This translates into lower spindle loads and more consistent dimensional control during finishing passes. For jobs where reduced burr formation and fine surface quality are decisive, the combination of a sharp edge and a 0.2 mm nose radius helps maintain form accuracy while minimising rework. The design is particularly suitable for jobs in which minimised cutting forces improve tool life and machine throughput. Reliable geometry and straightforward holder compatibility Designed as an ISO standard triangular tool, the insert features a 60° included angle, an 11° clearance and a cylindrical hole, which together determine compatibility with a wide range of clamping systems. Compatibility with the toolholder is governed by form, clearance angle, tolerance class, fastening style, size and thickness; confirming these parameters ensures secure clamping and repeatable set-up. The plate thickness of 3.18 mm and the one-sided chipbreaker give a balanced profile for stable chip control when paired with an appropriate holder and stable machining conditions. Practical application advice and process benefits Used primarily for turning, the insert performs best on non-ferrous alloys and applications that benefit from a clean, uncoated cutting edge. Select the chipbreaker and grade according to workpiece material, cutting strategy and machine rigidity to unlock the full potential of the insert. As an ISO-format item, stock and replacement management is simpler, reducing downtime and supporting predictable production planning. The consistent geometry of the insert supports efficient, repeatable operations — an advantage for shops targeting high first-pass quality and reduced secondary operations. For reliable finishing and consistent results with Tungaloy turning inserts, contact Metav Werkzeuge for order placement or an expert consultation via info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data Article number: 6808804 SKU: 6808804-Tungaloy Manufacturer SKU: TUN6808804 Brand: Tungaloy Facts Size: 11 Thickness: 3.18 mm Nose radius: 0.2 mm Clearance angle: 11° Point angle: 60° Special features ISO turning indexable insert Material: carbide Grade: TH10 (uncoated) Plate form: triangular Hole: with hole, cylindrical hole Chipbreaker: one-sided Typical application: turning Model series: ISO turning indexable inserts FAQ What materials is this insert best suited for? The TPGM110302 TH10 insert is tailored for non-ferrous materials and applications where an uncoated cutting edge supports low cutting forces and a clean surface. How does the TH10 grade affect performance? The TH10 uncoated carbide grade provides a sharp cutting edge that lowers cutting forces and helps achieve improved surface quality compared with more heavily coated grades. Is the insert compatible with standard ISO holders? Compatibility depends on form, clearance angle, tolerance class, fastening, size and thickness; the TPGM110302 follows ISO geometry to work with matching triangular holders. What is the function of the one-sided chipbreaker? The single-sided chipbreaker aids controlled chip formation for stable evacuation during turning, improving process reliability when combined with an appropriate cutting strategy. Can this insert be used for both external and internal turning? Yes, the indexable insert is suitable for both external and internal turning operations provided the selected holder and set-up suit the cutting conditions. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPGM 110304 NS9530 Wendeplatten - Tungaloy
Product data inconsistent: "Hartmetall" is specified while the cutting-grade details indicate an uncoated cermet (NS9530), which creates a clear contradiction in the material classification and raises concerns about the accuracy of the provided specifications, making it difficult to ensure clarity or precision in generating a reliable product description until this discrepancy is thoroughly investigated and resolved to align the material designation with the cutting-grade details for accurate representation.
TPGM 110304 NS9530 Wendeplatten - Tungaloy
Take advantage of the combination of a sharp uncoated cermet grade, a 0.4 mm corner radius and ISO conformity to achieve consistent surface quality and low cutting forces in continuous turning operations; order the insert directly via Metav Werkzeuge or ask our consultants if needed. TPGM 110304 NS9530 Tungaloy indexable turning insert (triangular, 11 mm, 11° clearance) The TPGM 110304 NS9530 is an ISO‑standard triangular indexable insert designed for precision external and internal turning with a sharp cutting edge for fine finishing. Uncoated cermet for fine finishing Sharp edge with low cutting forces Triangular form, 11 mm size 0.4 mm corner radius for profile accuracy Precision finishing for continuous turning The NS9530 grade is an uncoated cermet developed for finishing operations on steel where surface quality and low cutting forces are priority. Its sharp cutting edge reduces ploughing and heat generation, enabling stable, uninterrupted cuts in continuous turning. For shops seeking predictable part quality, the combination of a fine cermet substrate and a small corner radius delivers reduced vibration and consistent dimensional control. The result is fewer rework cycles and improved throughput without sacrificing surface integrity. Compatibility, clamping and handling made clear Compatibility with toolholders depends on plate shape, clearance angle, tolerance class, fastening and thickness. The triangular plate with an 11° clearance and a cylindrical locating hole ensures secure clamping in standard ISO turning holders and boring bars. The standardised ISO designation simplifies holder selection, while the central hole style helps with precise seating and repeatable indexing. When mounted in an appropriate external holder, the plate achieves reliable axial and radial support, minimising chatter and enhancing process stability. Productive grade and targeted applications This insert is optimised for turning (external and internal) with a single‑sided chipbreaker suitable for continuous cuts and small depths of cut. The 0.4 mm corner radius supports accurate profile transitions and fine edge finishes, while the uncoated cermet composition excels in low to moderate cutting speeds typical of finishing passes. For machinists aiming to improve first‑pass quality, the combination of geometry and grade reduces cutting forces and improves surface appearance, making it particularly suitable for finishing turned components in steel alloys. Contact Metav Werkzeuge today to discuss how the NS9530 cermet insert can fit existing holders and process requirements, or request tailored advice from our technical consultants at Metav Werkzeuge. Technical Data Article number: 6998018 Manufacturer article number: 6998018 Manufacturer SKU: TUN6998018 Model series: ISO-Drehwendeschneidplatten Facts Corner radius: 0.4 mm Plate thickness: 3.18 mm Plate size: 11 mm Clearance angle: 11° Inscribed angle: 60° Special features ISO designation: TPGM110304 Grade: NS9530 (uncoated cermet) Material base: Hartmetall Plate form: triangular Hole: with cylindrical hole Chipbreaker: single-sided Typical application: turning (external and internal) FAQ What materials is this insert suited for? The NS9530 grade is intended as a finishing grade for steel, offering a sharp cutting edge and low cutting forces for improved surface finish. Can the insert be used for internal and external turning? Yes, the triangular geometry and ISO designation support both external and internal turning applications when paired with the correct holder. How does the 0.4 mm corner radius affect surface finish? A 0.4 mm corner radius provides a balance between profile accuracy and edge strength, improving surface quality on finishing passes with small depths of cut. Is the NS9530 grade coated? No, this grade is an uncoated cermet, optimised for sharp edge performance and fine finishing rather than coated wear resistance. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPGM 110304 TH10 Wendeplatten - Tungaloy
Take advantage of the combination of precise geometry, a low‑force uncoated cutting edge and ISO compatibility for reliable turning performance; order the insert via Metav Werkzeuge or contact our advisors for application guidance. TPGM 110304 TH10 – Tungaloy indexable turning insert, uncoated carbide, 60° triangle The TPGM 110304 TH10 is an ISO‑standard triangular indexable insert for turning, designed for finishing and low‑force machining of non‑ferrous materials. Triangle insert with 60° included angle Uncoated carbide grade TH10 for low cutting forces Cylindrical hole for secure clamping 0.4 mm corner radius for fine finishing Consistent, low‑force cutting for superior surface finish The TH10 grade is an uncoated carbide specification developed to deliver low cutting forces and a clean surface finish when machining non‑ferrous materials. Its sharp universal edge supports finishing passes and light roughing where minimal built‑up edge and gentle chip formation are required. Customers gain tangible process benefits: reduced spindle load, steadier cutting conditions and improved dimensional stability, which together contribute to higher throughput and less rework on components made from aluminium, messings and similar alloys. Precision geometry that matches ISO holders and reduces setup time The insert’s triangular form with a 60° included angle and 11° relief angle is ISO‑compliant, simplifying holder selection and ensuring repeatable seating. The 0.4 mm corner radius and 3.18 mm thickness provide a predictable contact interface with standard external holders and boring bars. The central cylindrical hole secures the insert with standard screws and clamping sets; when combined with the appropriate support pad and tolerance class, the result is a rigid assembly that preserves tool life and repeatability across batches. Clear specification of these dimensions aids process planning and minimises trial‑and‑error during tool setup. Operational advantages and recommended application approach Using this indexable insert in turning operations brings practical benefits: improved chip control with the single‑sided chipbreaker, consistent edge performance from the uncoated carbide, and versatility across typical external and internal turning tasks. Select the TH10 grade and the single‑sided chipbreaker when the priority is low cutting forces and superior finish on non‑ferrous workpieces; for heavier cuts or different materials, match the insert grade and chipbreaker to the workpiece and machine stability. The combination of ISO conformity and standard mounting features reduces tooling complexity and supports quicker changeovers in production environments. Contact Metav Werkzeuge for tailored holder compatibility checks and ordering advice on the Tungaloy TPGM 110304 TH10 insert — eMail: info@metav-werkzeuge.com, Phone: +49 2822 7131930 Technical data Manufacturer article number: 6808808 Manufacturer SKU: TUN6808808 Seller SKU: 6808808-Tungaloy Label: TPGM110304 TH10 Tungaloy‑Wendeplatte Model series: ISO indexable turning inserts Core numerical data Thickness: 3.18 mm Corner radius: 0.4 mm Insert size: 11 mm Relief angle: 11° Included angle: 60° Special features Material: carbide (uncoated) Grade: TH10 (sharp universal for non‑ferrous) Shape: triangular insert Hole style: with cylindrical hole Chipbreaker: single‑sided Application: turning (external and internal) FAQ What materials is this insert suitable for? The TH10 uncoated carbide grade is intended for non‑ferrous materials and applications where a sharp, uncoated edge promotes low cutting forces and a clean surface finish; the TPGM 110304 performs well on aluminium and messings. Can the insert be used in standard ISO holders? Yes, the TPGM 110304 follows ISO geometry and the cylindrical hole plus standard dimensions permit use in compatible external holders and boring bars when the correct tolerance class and clamping parts are applied. What finish can be expected with the 0.4 mm corner radius? A 0.4 mm radius delivers fine finishing capability while maintaining edge strength; with the TH10 grade, expect improved surface quality on finishing passes compared with larger radii. Is the insert coated or uncoated and what does that mean for cutting conditions? The TPGM 110304 is an uncoated carbide insert (TH10); this promotes lower cutting forces and reduced tendency for built‑up edge in non‑ferrous turning, though cutting parameters should be adapted to material and machine rigidity. How is the insert secured in the holder? The insert uses a central cylindrical hole for screw clamping together with a support pad or clamping set; correct clamp torque and seat cleanliness ensure stable, repeatable mounting. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
TPGM 110304 UX30 Wendeplatten - Tungaloy
Efficient turning with a sharp UX30 uncoated carbide grade and a single-sided chipbreaker for low cutting forces and controlled chips; ISO compatibility simplifies changeovers and holder selection. Order the insert directly via Metav Werkzeuge or consult their advisers for process-specific recommendations. TPGM110304 UX30 Tungaloy turning insert (TPGM 110304, triangular, UX30) The TPGM110304 UX30 is an ISO-format indexable insert designed for external and internal turning, offering a sharp cutting edge and optimised chip control for stable, economical machining. ISO TPGM110304 triangular insert UX30 Uncoated carbide with sharp cutting edge Single-sided chipbreaker for controlled chips 11° clearance angle; 60° included angle Improved productivity through lower cutting forces The UX30 grade is an uncoated carbide designed for operations where low cutting forces and reliable chip control are priorities. With a deliberately sharp cutting edge, the insert reduces power draw and heat generation during turning, which helps to prolong tool life and maintain consistent cycle times. For production-focused environments this translates to fewer interruptions and improved throughput without sacrificing surface quality. Straightforward holder compatibility and quick indexing Built to ISO dimensions, the insert matches standard clamping systems when form, clearance, tolerance class, attachment and thickness are observed. The ISO TPGM110304 designation ensures predictable fitment with common external holders and boring bars; the 3.18 mm plate thickness and cylindrical hole support secure clamping and repeatable positioning. Clear compatibility criteria reduce set-up time and simplify inventory management in workshop and production settings. Consistent surface finish via controlled chip formation The geometry combines a single-sided chipbreaker and a 0.4 mm radius to balance edge strength with finish requirements. The 11° clearance angle minimises flank rubbing while the 60° included angle of the triangular shape provides three usable cutting edges per index, enabling economical indexing. Together these features promote stable chips and help to avoid built-up edge, resulting in more consistent part tolerances and reduced secondary operations. Application-focused choice for reliable machining As an indexable insert for turning, this plate is suitable for both external and internal operations where reduced cutting forces and clean chips are needed. Selection of the chipbreaker and the UX30 grade should be matched to the workpiece material, machining stability and feed parameters to achieve the best balance of tool life and surface integrity. The standardised form and secure clamping make it a pragmatic choice for mixed-series production and job-shop environments seeking dependable results. Contact Metav Werkzeuge for tailored technical advice and availability of Tungaloy turning inserts; quote SKU TUN6808807 or article number 6808807 when enquiring at info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical Data Article number: 6808807 Manufacturer SKU: TUN6808807 SKU: 6808807-Tungaloy Facts Radius: 0.4 mm Thickness: 3.18 mm Clearance angle: 11° Included angle: 60° Size: 11 Special features Material: carbide (uncoated) Shape: triangular indexable insert Hole: with cylindrical hole Chipbreaker: single-sided Series: ISO turning indexable inserts Application: turning (external and internal) FAQ What work processes is this insert intended for? The TPGM110304 UX30 insert is intended for turning operations; it is suitable for both external and internal turning where low cutting forces and good chip control are required. Which dimensions should be checked for holder compatibility? Check form, clearance (11°), tolerance class, attachment method, plate thickness (3.18 mm) and size (11) to ensure compatibility with the chosen holder when fitting the ISO-format insert. How does the chipbreaker influence machining performance? A single-sided chipbreaker supports controlled chip formation and evacuation, which contributes to stable cutting, improved surface finish and reduced risk of built-up edge during continuous turning. Is the insert easy to index and replace during production? Yes; as an ISO triangular indexable insert with a cylindrical hole and standard thickness, the plate offers predictable clamping and three usable edges for economical indexing Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPGM 160302 NS9530 Wendeplatten - Tungaloy
Conflicting material information prevents a reliable product description. One entry specifies the cutting material as cemented carbide while another specifies an uncoated cermet grade (NS9530); these are distinct material types. Cemented carbide is a composite material known for its hardness and wear resistance, commonly used in cutting tools, while cermet, a composite of ceramic and metallic materials, offers enhanced heat resistance and is often chosen for specific machining applications. Please clarify whether the insert is cemented carbide or cermet, as this distinction is crucial for ensuring the accuracy of the product description and providing customers with the correct technical specifications.
TPGM 160304 NS9530 Wendeplatten - Tungaloy
Combining the sharp cermet cutting edge, ISO triangular geometry and proven compatibility with standard holders delivers consistently high-quality finishes and stable turning performance; order the insert directly via Metav Werkzeuge or ask the consultants for application advice. TPGM 160304 NS9530 – Tungaloy ISO turning insert, 60° triangular finishing grade TPGM 160304 NS9530 is an ISO-standard triangular turning insert designed for finishing operations on steel, optimised for continuous cuts and small depths of cut and suitable for both external and internal turning. ISO triangular insert, 60° included angle Uncoated cermet NS9530 for fine finishing Sharp cutting edge for low cutting forces Compatible with standard ISO holders Consistent finishing and low cutting forces for steel turning The uncoated cermet NS9530 is a finishing grade developed for precision work on steel, delivering a sharp cutting edge that reduces cutting forces and vibration. This combination results in a measurable improvement in surface quality and reduces rework. For operations where small depths of cut and continuous turning predominate, the deposit-free cermet ensures repeatable, high surface finish results. The material chemistry of cermet balances hardness and fracture resistance, which makes it especially effective when the goal is a mirror-like finish rather than aggressive material removal. Reliable fit and system compatibility for workshop integration Designed to ISO geometry, the triangular shape with a 60° included angle and a standard mount configuration allows straightforward integration into existing tool systems. Compatibility depends on holder form, clearance angle, tolerance class, attachment method, size and thickness; the insert’s specifications—such as the 11° relief angle and 3.18 mm plate thickness—are selected to align with common external holders and boring bars. Clear specification of these parameters reduces setup time and ensures the insert seats correctly, which in turn preserves the cutting edge and maintains process stability. Operational advantages: productivity without compromise Using a finishing cermet such as NS9530 yields operational benefits beyond surface quality. The low cutting forces reduce tool-induced deflection and can permit modestly higher feed stability in delicate turning operations, while the sharp edge minimises heat build-up at the cutting zone. For shops seeking to optimise cycle times without sacrificing finish, this insert offers an economical route: reduced secondary operations, fewer finishing passes and more consistent part tolerance. When machining continuous cuts, the single-sided chipbreaker helps control chip flow and supports safe swarf evacuation. Practical selection guidelines and application notes When selecting this triangular insert for turning, match the corner radius (0.4 mm) and chipbreaker style to the desired surface tolerance and feed rate. The insert is supplied with a cylindrical hole, providing secure fixation in standard clamp systems and easing indexation. Choose the NS9530 finishing grade for operations prioritising surface quality on steel; for roughing or interrupted cuts, consider a different grade or geometry optimised for toughness. The modular system—insert, suitable external holder or boring bar, backing pad and replacement screws—allows flexible tooling set-ups and straightforward maintenance planning. Contact Metav Werkzeuge today for tailored application recommendations on Tungaloy finishing inserts and to order the TPGM 160304 NS9530; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6998021 Manufacturer SKU: TUN6998021 SKU: 6998021-Tungaloy Facts Included angle: 60° Corner radius: 0.4 mm Relief (clearance) angle: 11° Plate thickness: 3.18 mm Plate size: 16 ISO designation: 160304 Special features Uncoated cermet grade NS9530 Finishing grade for steel with sharp cutting edge Single-sided chipbreaker Triangular plate form With hole — cylindrical hole style ISO-standard turning insert Designed for external and internal turning, continuous cuts FAQ What materials is this insert intended for? The NS9530 finishing grade is formulated for machining steel and is especially suited to operations where a fine surface finish is required. Is the insert compatible with standard ISO triangular holders? Yes, the triangular ISO geometry (160304) and the specified size and thickness are intended for compatibility with standard ISO holders and boring bars when matched by form and tolerance. What does the NS9530 cermet offer compared with coated carbide? NS9530 provides a very sharp edge and excellent surface finish for continuous, light-depth turning; compared with coated carbide, it focuses on finishing performance rather than heavy-duty toughness. Can this insert be used for internal turning as well as external turning? Yes, the design supports both external and internal turning operations, provided the correct holder and setup are used for the application. What is the manufacturer article number and product identification? The item is listed under article number 6998021 and SKU 6998021-Tungaloy; the manufacturer SKU is TUN6998021 for ordering and reference. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPGM 160304 NS9530 Wendeplatten - Tungaloy
Take advantage of precise ISO compatibility, a sharp uncoated cermet cutting edge and a small corner radius for reliable finishing cuts; order the insert directly via Metav Werkzeuge or consult the team for grade and holder matching. TPGM160304 NS9530 Tungaloy indexable insert — uncoated cermet, finishing grade TPGM160304 NS9530 Tungaloy is an ISO‑standard triangular indexable insert designed for finishing turning operations on steel, offering a sharp cutting edge and low cutting forces. ISO‑compliant triangular insert Uncoated cermet for fine finishing Sharp edge reduces cutting forces 11° relief angle for stable cutting Achieving consistent finishing on steel with low cutting forces The uncoated cermet grade NS9530 is formulated for finishing applications where a sharp edge and low cutting forces are required. The insert is designed for continuous cuts and small depths of cut, which makes it well suited to operations that prioritise surface integrity and dimensional control. The geometry of the triangular insert ensures three indexable edges per insert, while the 0.4 mm corner radius balances edge strength with achievable surface finish. Compatibility with a holder is determined by form, 11° relief angle, size and thickness, and these parameters are critical for achieving repeatable, high‑quality results. System integration for fast tool changes and stable clamping As an ISO series indexable component, the insert fits into standard external holders and boring bars when the form, tolerance and attachment match. The insert features a cylindrical hole for central clamping and a plate thickness of 3.18 mm, allowing secure fastening with standard underlay/clamp sets and replacement screws. This system approach reduces downtime: inserts are changed quickly and clamping repeatability is ensured by standardised dimensions, so process stability and batch consistency are improved without extensive rework or set‑up time. Productivity gains through material and geometry optimisation The combination of cermet cutting material, a sharp cutting edge and a 60° entering angle delivers enhanced surface finish with reduced need for secondary operations. The one‑sided chipbreaker is adapted for finishing feeds, supporting controlled chip formation and efficient evacuation. For turning applications on steel, this insert helps to lower cycle times through stable cutting behaviour while maintaining high surface quality. If additional process parameters or test cuts are required, Metav Werkzeuge can provide dimension and grade guidance to align the insert with production needs. Request a technical quote from Metav Werkzeuge for the Tungaloy TPGM160304 NS9530 to optimise finishing performance in turning; contact via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6998020 Manufacturer SKU: TUN6998020 SKU: 6998020-Tungaloy Series: ISO turning indexable inserts Material: Carbide Grade: NS9530 Shape/Designation: TPGM160304 Core data Insert size: 16 mm Thickness: 3.18 mm Corner radius: 0.4 mm Relief angle: 11° Entering angle: 60° Design and features Triangular insert geometry Cylindrical centre hole One‑sided chipbreaker Uncoated cermet grade for finishing Intended application: turning (external and internal) ISO‑standard compatibility FAQ What steels is the NS9530 grade recommended for? The NS9530 grade is optimised for finishing operations on a wide range of steels; the Tungaloy TPGM160304 NS9530 insert (SKU 6998020‑Tungaloy) delivers a sharp edge and low cutting forces suitable for continuous finishing cuts. How is holder compatibility ensured for this ISO insert? Compatibility depends on form, relief angle (11°), size (16 mm), thickness (3.18 mm) and fastening method; matching these parameters guarantees correct fit and clamping for the TPGM160304 NS9530 indexable insert. What surface finish can be expected when using this insert for finishing? With its uncoated cermet composition and 0.4 mm corner radius, the insert is designed to produce improved surface integrity and reduced need for secondary finishing operations in turning. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPGM 160304 TH10 Wendeplatten - Tungaloy
Benefit from the combination of low cutting forces and clean surface finishes delivered by the TH10 uncoated carbide grade and the ISO-standard TPGM geometry; the balanced corner radius and single-sided chipbreaker ensure predictable chips and stable turning. Order genuine Tungaloy inserts directly via Metav Werkzeuge or consult our specialists for application-specific guidance. TPGM 160304 TH10 — ISO triangular indexable turning insert for turning, Tungaloy The TPGM 160304 TH10 is an ISO-standard triangular indexable turning insert designed for external and internal turning, offering a 0.4 mm corner radius and a single-sided chipbreaker for controlled chip formation. Uncoated carbide for low cutting forces Triangle form with cylindrical hole 0.4 mm corner radius for balanced strength 3.18 mm plate thickness for secure clamping Improved process efficiency through lower cutting forces The uncoated TH10 carbide grade is a sharp, universal choice optimised for non-ferrous materials and operations where a clean cutting edge reduces cutting force. Lower cutting forces result in reduced vibration and energy consumption, which in turn stabilises the machining process and protects the toolholder. The combination of a sharp grade and a tailored chipbreaker leads to predictable chip formation; predictable chips reduce interruptions and improve cycle-time consistency, delivering measurable efficiency gains on repetitive turning tasks. Straightforward integration with ISO tooling systems Compatibility of this ISO insert is determined by geometry, relief angle, tolerance class, clamping method, size and thickness, which simplifies selection when matching to holders or boring bars. The 11° relief angle and 3.18 mm thickness are key parameters for ensuring correct seat and clamping; the insert’s triangular form and cylindrical hole enable reliable location in ISO-compatible clamping systems. Clear specification of these dimensions supports fast tool changeover and repeatable seating, reducing setup time and the risk of misloading. Reliable edge performance for high-quality surfaces A 0.4 mm corner radius provides a balance between edge strength and the ability to produce fine surface finishes: small radii suit detail work and tight profiles, while this radius still offers sufficient toughness for stable feeds. The insert’s single-sided chipbreaker helps form short, manageable chips in non-ferrous turning, lowering the chance of built-up edge and minimising surface defects. For applications prioritising surface quality and low machining forces, the geometry and grade combine to deliver consistent, clean results. Practical application advice for industrial turning The insert is suited to a range of turning operations including external and internal turning where the workpiece material matches the grade’s strengths, notably aluminium alloys, brass and other non-ferrous metals. When selecting a holder, ensure the seat matches ISO TPGM geometry and that clamping hardware accommodates the 3.18 mm thickness and the cylindrical locating hole. For higher stability or interrupted cuts, consider a heavier-duty holder or reduced overhang to complement the insert’s characteristics and maintain process reliability. For application advice or to secure genuine Tungaloy TPGM 160304 TH10 inserts, contact Metav Werkzeuge for tailored recommendations and availability — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6808814 Manufacturer SKU: TUN6808814 Dealer SKU: 6808814-Tungaloy Brand: Tungaloy Model series: ISO indexable turning inserts Material: Carbide Core dimensions Size: 16 mm Plate thickness: 3.18 mm Corner radius: 0.4 mm Relief angle: 11° Included angle: 60° Hole: with hole (cylindrical) Chipbreaker: single-sided Design and special features ISO designation: TPGM160304 Grade: TH10 (uncoated carbide) Shape: triangular Typical application: turning (external & internal) Compatibility determined by form, relief angle, tolerance class, clamping, size, thickness FAQ What materials is this insert best suited for? The TPGM 160304 TH10 insert is designed primarily for non-ferrous materials such as aluminium alloys and brass; the TH10 uncoated carbide grade promotes low cutting forces and clean surface finishes in these applications. How does the single-sided chipbreaker affect turning performance? A single-sided chipbreaker on this insert produces short, controlled chips in suitable materials, reducing the risk of entanglement and improving surface consistency during continuous turning operations. Which clamping and holder features must be checked before use? Ensure the holder matches the ISO TPGM geometry, accommodates a 3.18 mm plate thickness and the cylindrical locating hole, and provides stable clamping to benefit from the insert’s performance characteristics. Can this insert handle interrupted cuts or heavy feeds? The 0.4 mm corner radius offers a compromise between edge strength and finish; for heavy, interrupted cuts, a sturdier holder or reduced overhang is recommended to maintain stability and protect the cutting edge. Is the insert supplied coated or uncoated? This insert is an uncoated carbide grade (TH10), chosen to keep cutting forces low and to avoid built-up edge when machining non-ferrous materials. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPGM 160304 UX30 Wendeplatten - Tungaloy
Take advantage of the combination of a sharp cutting edge, the UX30 grade and a compact 60° triangular form to reduce cutting forces and improve chip control; order directly via Metav Werkzeuge or consult our technical team for selection and compatibility advice. TPGM160304 UX30 Tungaloy indexable insert for turning — 60° triangular, 0.4 mm radius TPGM160304 UX30 is an ISO‑standard indexable turning insert designed for general turning operations where low cutting forces and reliable chip formation are required. Sharp cutting edge for low cutting forces UX30 uncoated carbide grade 60° triangular geometry, 0.4 mm nose radius 3.18 mm thickness with cylindrical hole Reduced cutting forces and predictable chip control for efficient turning The triangular insert offers a 60° geometry combined with a 0.4 mm nose radius, which results in lower radial engagement and smoother cutting when compared with larger radii. The UX30 classification identifies an uncoated carbide grade optimised for sharp edges; this reduces the force required at the cutting interface and helps maintain consistent chip shapes during both external and internal turning. For operations where minimised power draw and controlled material removal are priorities, the geometry and grade of this indexable component deliver measurable process advantages. Simple integration with ISO holders and secure clamping Compatibility depends on form, relief angle, tolerance class, fastening method, size and thickness; the insert conforms to ISO‑standard dimensions and the presence of a cylindrical hole ensures reliable locating and repeatable clamping in most common external holders or boring bars. The nominal 3.18 mm thickness gives sufficient body support while remaining compatible with established clamping systems. Clear specification of form and hole style supports rapid tool changeover and predictable assembly, reducing set‑up time on the shop floor and improving overall equipment utilisation. Application range and material suitability explained Designed primarily for turning, the insert is suitable for machining a broad range of steels and similar alloys where low cutting forces and good chip breakage are beneficial. The single‑sided chipbreaker promotes manageable chips in medium to light cutting conditions; selecting the correct holder stability and cutting parameters aligns the insert’s strengths with the chosen workpiece material. The term “uncoated carbide” refers to the base carbide substrate without additional PVD/CVD layers, which can be preferable in interrupted cuts or when a very sharp cutting edge is required. Practical benefits for process reliability and productivity Using an ISO‑conforming triangular insert simplifies stocking and tool management across multiple lathes. The combination of a defined nose radius, a precise relief angle and the UX30 grade supports repeatable part quality and longer effective edge life under appropriate cutting conditions. Where consistent surface finish and predictable tool life are required, the component’s specification assists process planners in selecting feeds and speeds that balance productivity with tool wear. Contact Metav Werkzeuge for personalised advice on selecting the right Tungaloy grade and to confirm holder compatibility for precision turning applications Technical data Article number: 6808813 Manufacturer SKU: TUN6808813 Label: TPGM160304 UX30 Tungaloy-Wendeplatte Numbers / Core technical data Geometry angle: 60° Nose radius: 0.4 mm Thickness: 3.18 mm Size: 16 mm Special features Grade: UX30 Material: uncoated carbide Chipbreaker: one-sided Hole: with cylindrical hole Plate form: triangular Application: turning Model series: ISO turning indexable inserts Compatibility note: depends on form, relief angle, tolerance class, fastening, size and thickness FAQ What turning tasks is this insert suited for? The TPGM160304 UX30 insert is suitable for general turning operations where low cutting forces and controlled chip formation are desired; it performs well in light to medium cutting conditions. Can the insert be used for internal turning as well as external turning? Yes; the ISO‑standard form and the cylindrical hole allow use in appropriate internal toolholders and external holders, provided the holder geometry matches the insert dimensions. What does UX30 mean for performance? UX30 denotes an uncoated carbide grade with a sharp cutting edge designed to reduce cutting forces and promote stable chip formation, especially useful in applications requiring crisp edge fidelity. How important is the 0.4 mm nose radius in practice? A 0.4 mm nose radius balances surface finish and strength of the cutting edge: it reduces cutting pressure compared with larger radii while still delivering an acceptable surface quality for many turned components. Which holders are compatible with this ISO insert? Compatibility is determined by insert form, relief angle, tolerance class, fastening method, size and thickness; many standard ISO external and internal holders that accept TPGM‑type inserts will be suitable when these parameters align. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld; info@metav-werkzeuge.com; +49 2822 7131930
TPGN 090204 DX140 Wendeplatten - Tungaloy
Combining high cutting speeds with extended tool life and a precision 60° triangle geometry, this insert delivers reliable performance for small-part turning and long-turning automatics; order the TPGN090204-DIA DX140 Tungaloy indexable insert directly via Metav Werkzeuge or ask our consultants if needed. TPGN 090204 DX140 Tungaloy indexable insert for turning — PCD, 60° triangle A TPGN090204-DIA DX140 indexable insert engineered for precision turning of small components and bar-fed lathes PCD grade DX140 for high cutting speeds Long tool life for productive turning Triangle 60° geometry for fine parts 0.4 mm radius for precise edge control High-speed performance for non‑ferrous and abrasive materials The insert uses polycrystalline diamond (PCD) in the DX140 grade, optimised for machining aluminium, non‑ferrous metals and abrasive non‑metallic materials. The PCD cutting layer enables high cutting speeds, which reduces cycle times on bar‑fed lathes and small turning centres while maintaining dimensional stability. For production environments where throughput and consistent surface quality matter, this grade provides a predictable balance of speed and longevity, helping to lower per‑part machining costs. Made for small-part turning and long-turning automatics Designed as part of the MiniForce‑Turn series, the insert suits fine and small‑component workpieces typical in watchmaking, medical parts and micro‑mechanical assemblies. The triangular plate form and compact dimensions support secure clamping in mini toolholders and allow effective chip evacuation in continuous bar‑feed operations. Integration into automated turning lines is straightforward thanks to the standard ISO designation 090204, ensuring compatibility with common pocket and clamping systems. Precision geometry that boosts surface finish and repeatability A controlled geometry is central to performance: the 60° included angle and 0.4 mm corner radius produce accurate corner transitions and consistent part profiles, while the 11° relief angle reduces rubbing and heat generation at the cutting edge. The plate thickness of 2.38 mm contributes to mechanical stability during interrupted cuts, and the DIA chipbreaker promotes predictable chip formation when turning thin or difficult chips. Together, these features enhance surface finish and repeatability, especially on small diameters. Robust substrate and economical production benefits The body is manufactured from cemented carbide, providing a rigid foundation for the PCD layer and resisting deformation during prolonged runs. The insert is supplied without hole, simplifying indexing and reducing inventory complexity for certain toolholders. Long tool life and reduced tool change frequency translate into less downtime and lower tooling expenditure over production cycles. Traceable identification is available via the manufacturer SKU and article numbers for procurement and stock control. Contact Metav Werkzeuge for detailed application advice on the DX140 PCD inserts from Tungaloy and to request availability or order information via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 6808817 SKU: 6808817-Tungaloy Manufacturer: Tungaloy Data ISO designation: 090204 Size: 09 Thickness: 2.38 mm Corner radius: 0.4 mm Relief angle: 11° Included angle: 60° Special features PCD grade DX140 Polycrystalline diamond cutting layer Suitable for aluminium and non‑ferrous metals Suitable for abrasive non‑metallic materials Triangle plate form Chipbreaker: DIA Substrate: cemented carbide Part of MiniForce‑Turn series Supplied without hole FAQ What materials is this insert suitable for? This insert uses the DX140 PCD grade and is suitable for aluminium, other non‑ferrous metals and abrasive non‑metallic materials when high cutting speeds and long tool life are required. Which machines and applications is it intended for? The geometry and dimensions suit precision turning on small lathes and long‑turning automatics; the MiniForce‑Turn system compatibility supports bar‑feed production of fine components. How does DX140 PCD compare with conventional carbide in this application? DX140 PCD on a cemented carbide body offers significantly higher wear resistance on non‑ferrous and abrasive workpieces than uncoated carbide, resulting in longer tool life and fewer tool changes for the same application. What are the key geometric specifications to consider when selecting holders? Important values are the ISO code 090204, 60° included angle, 0.4 mm corner radius and 2.38 mm thickness; holders and pockets must accept triangular inserts with these dimensions. Is the insert supplied with a hole for screw clamping? This article is supplied without hole, which is suitable for clamp‑style pockets designed for holeless triangular inserts. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPGN 110302 TH10 Wendeplatten - Tungaloy
Sharp uncoated carbide grade TH10 combined with an ISO‑conforming triangular geometry and a 60° cutting angle ensures low cutting forces and a clean surface finish in turning operations. Order the TPGN110302 TH10 insert via Metav Werkzeuge or contact our consultants for compatibility advice. TPGN 110302 TH10 — Tungaloy triangular turning insert, 60° geometry The TPGN110302 TH10 is an ISO‑standard triangular turning insert designed for external and internal turning, offering a sharp uncoated carbide grade for reduced cutting forces and improved finish. ISO‑conforming triangular insert Uncoated carbide grade TH10 60° geometry for turning 0.2 mm corner radius for fine finishing Precise, low‑force turning for cleaner surfaces The combination of the TH10 uncoated grade and the triangular cutting geometry provides low cutting forces and supports a clean surface with reduced burr formation. The uncoated carbide edge is optimised for operations where minimal friction and sharpness are required, especially with non‑ferrous materials and softer alloys. With a compact 0.2 mm corner radius, this insert is suited to finishing passes and fine turning where dimensional control and surface quality are priorities. Simple integration into ISO clamping systems Designed to ISO dimensions, the insert integrates easily into standard ISO holders; compatibility depends on the holder’s form, relief angle, tolerance class, clamping method, size and thickness. The ISO conformity and triangular shape facilitate rapid replacement and predictable register in the pocket, while the 3.18 mm thickness offers robust support under axial and radial loads. The insert is supplied without a chipbreaker and without a hole, enabling use in holders that rely on top‑clamp or wedge systems. Application advantages and production reliability This triangular insert is particularly useful for turning jobs requiring a sharp edge and good finish on aluminium, brass and other non‑ferrous workpieces. The absence of a coated layer reduces cutting forces and tool‑workpiece heat in these applications, extending the window for stable cutting conditions. For productive series machining, select the appropriate holder and cutting parameters to exploit the insert’s geometry and TH10 properties; this approach supports repeatable results and contributes to overall process efficiency. For reliable finishing and predictable edge behaviour choose the Tungaloy TH10 grade; contact Metav Werkzeuge for availability and compatibility checks at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6808818 Manufacturer SKU: TUN6808818 Model series: ISO turning inserts Material: cemented carbide Facts Cutting angle: 60° Relief angle: 11° Thickness: 3.18 mm Size (inscribed): 11 mm Corner radius: 0.2 mm Special features Grade: TH10 (uncoated) Shape: triangular Hole: without hole Chipbreaker: none Application: turning ISO‑compliant insert Suitable for non‑ferrous materials FAQ Is this insert suitable for internal as well as external turning? Yes. The triangular geometry and ISO sizing allow the insert to be used for both external and internal turning when mounted in a compatible holder; the TPGN110302 TH10 performs well in light to medium cutting conditions. Which materials are recommended for this uncoated TH10 grade? The TH10 uncoated carbide grade is recommended for non‑ferrous materials and applications where a sharp, low‑friction edge produces a cleaner surface; it is not optimised for high‑hardness steels. What is the effect of the 0.2 mm corner radius? A 0.2 mm corner radius provides a fine cutting edge for improved surface finish and dimensional accuracy in finishing passes with controlled cutting parameters. Does the insert include a chipbreaker or mounting hole? The insert is supplied without a chipbreaker and without a hole, intended for clamping systems that secure triangular inserts by form fit and top clamp. How is compatibility with holders determined? Compatibility is governed by the insert’s form, relief angle (11°), tolerance, clamping method, size (11 mm) and thickness (3.18 mm); ensure the holder is ISO‑compliant for correct seating and secure clamping. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
TPGN 110304 BX360 Wendeplatten - Tungaloy
Take advantage of the combination of CBN wear resistance, precise ISO compatibility and a compact 3.18 mm thickness for stable finishing operations; order the insert directly via Metav Werkzeuge or request specialist guidance from our consultants. TPGN 110304 BX360 ISO triangular turning insert by Tungaloy — CBN grade for hardened steels TPGN 110304 BX360 is an ISO triangular indexable insert designed for turning, offering a wear-resistant CBN cutting material for high-hardness finishing applications CBN grade for hardened steels ISO triangular insert with 60° geometry 0.4 mm corner radius for fine finishing Improve finishing consistency and reduce tool change frequency The BX360 grade uses cubic boron nitride (CBN) bonded to a carbide substrate to provide exceptional wear resistance when machining hardened steels. This results in more consistent cutting-edge life and an improved surface finish on high-hardness components, which reduces rework and tool-change interruptions. CBN is a superhard abrasive optimised for sustained contact with workpieces at elevated temperatures; when mounted correctly, the insert maintains cutting geometry longer than conventional carbide grades, enabling stable, repeatable production runs. Secure fit and rigidity for reliable turning performance Compatibility within ISO turning systems is determined by insert form, 11° relief angle, tolerance class, clamping method, size and thickness. The triangular shape with a 60° included angle and a 3.18 mm thickness delivers rigidity suited to fine external and internal turning. The 0.4 mm corner radius supports delicate profile work and light finishing passes, while the absence of a chipbreaker signals suitability for operations prioritising surface quality over heavy chip control. Correct holder selection and stable clamping are essential to exploit the insert’s material and geometry advantages. Application guidance and practical benefits for production Intended primarily for wear‑intensive finishing of hardened steels and, depending on the variant, certain cast irons, this ISO insert integrates into a system comprising an insert, compatible external holder or boring bar, clamping set and replacement screws. The compact dimensions and standard ISO designation simplify inventory management and allow quick identification for batch replenishment. For components where tolerances and surface integrity matter, the insert’s design helps achieve consistent part quality with fewer adjustments, supporting more efficient machining cycles and predictable output. For tailored recommendations on Tungaloy BX360 CBN inserts and to arrange supply through Metav Werkzeuge, please contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6808826 SKU: 6808826-Tungaloy Manufacturer SKU: TUN6808826 Manufacturer: Tungaloy Designation: TPGN110304 BX360 Series: ISO turning indexable inserts Core technical data Corner radius: 0.4 mm Relief angle: 11° Included angle: 60° Insert size: 11 mm Thickness: 3.18 mm Special features Grade: BX360 Cutting material: cubic boron nitride (CBN) Substrate: carbide Shape: triangular Hole style: none Chipbreaker: none Application: turning; hardened steels; depending on version, cast iron FAQ Which materials is this insert suitable for? The TPGN110304 BX360 insert by Tungaloy is designed primarily for machining hardened steels and, depending on the variant, can be used for certain types of cast iron. What makes BX360 different from standard carbide grades? BX360 is a CBN grade; cubic boron nitride provides superior wear resistance and thermal stability compared with conventional carbide grades, improving edge life in wear‑intensive finishing. How is holder compatibility determined for this ISO insert? Compatibility depends on insert form, relief angle (11°), tolerance class, clamping method, size (11 mm) and thickness (3.18 mm); matching these parameters ensures secure seating and repeatable performance. Is this insert suitable for heavy roughing cuts? The TPGN110304 BX360 insert is optimised for finishing and high‑hardness work rather than heavy roughing, especially given the 0.4 mm corner radius and absence of a chipbreaker. What advantages does the 0.4 mm corner radius provide? A 0.4 mm radius improves surface finish and reduces stress concentrations on fine profiles, making it suitable for precision turning and light finishing passes. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPGN 110304 DX120 Wendeplatten - Tungaloy
Take advantage of the combination of PCD cutting material, a 0.4 mm corner radius and ISO compatibility for efficient, high-speed turning of aluminium and non‑ferrous parts; order directly via Metav Werkzeuge or consult the sales team for application support. TPGN110304 DX120 ISO Turning Insert, PCD Grade, 0.4 mm Radius — Tungaloy The TPGN110304 DX120 is an ISO-standard triangular turning insert engineered for high-speed turning of aluminium, non‑ferrous metals and abrasive non‑metallic materials. Triangular ISO insert, fits ISO holders PCD grade DX120 for long tool life 0.4 mm corner radius for precise contours 11° relief angle for secure chip control High-speed PCD performance for non‑ferrous machining The insert combines a PCD cutting layer in the DX120 grade with a stable carbide substrate, enabling very long tool life in high‑speed operations. For machining aluminium, non‑ferrous metals and abrasive non‑metals, the hard, wear‑resistant diamond cutting surface reduces flank wear and preserves edge integrity, which translates into fewer tool changes and lower processing costs per component. The result is predictable productivity even in repeatable production runs. Geometry designed for repeatable, accurate turning The triangular geometry with a 0.4 mm corner radius and an 11° relief angle delivers consistent contour control and reliable edge engagement. This geometry supports precise profiling on external and internal features while the 60° included angle offers good strength at the cutting edge. Because compatibility with toolholders depends on insert form, relief angle, tolerance class, fastening, size and thickness, the ISO conformity ensures straightforward replacement and consistent clamping across standard external holders and boring bars, improving process stability. System readiness that reduces downtime and simplifies inventory As part of an ISO insert system, the component is intended for use with a matching external holder or boring bar, together with the appropriate shim/clamping set and spare screws. The absence of an internal hole facilitates certain clamping concepts and quick indexing. Selecting the correct chipbreaker and material grade according to workpiece, machining method and machine stability delivers the primary economic benefits: long tool life and fewer interruptions for re‑tooling, which supports higher effective machining time and lower per‑part tooling cost. For specification checks or to discuss machining with the PCD-grade TPGN110304 DX120 insert, contact Metav Werkzeuge by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 for tailored advice and rapid supply Technical data Article number: 6808824-Tungaloy Manufacturer SKU: TUN6808824 Manufacturer article number: 6808824 Model series: ISO-Drehwendeschneidplatten Name: TPGN110304 DX120 Tungaloy-Wendeplatte Facts Corner radius: 0.4 mm Relief angle: 11° Thickness: 3.18 mm Size (inscribed circle): 11 mm Included angle: 60° Special features ISO-standard turning insert Triangular insert, without hole Cutting material: polykristalliner Diamant (PCD) Substrate material: Hartmetall (carbide) Grade: DX120 Typical application: turning (external and internal) Suited for: aluminium, non‑ferrous metals, abrasive non‑metals Compatibility determined by form, relief angle, tolerance class, fastening, size and thickness FAQ What materials is this insert best suited for? The TPGN110304 DX120 insert (Tungaloy turning insert, SKU 6808824-Tungaloy) is optimised for aluminium, non‑ferrous metals and abrasive non‑metallic materials thanks to its PCD cutting surface. Can the insert be used for internal turning operations? Yes — the ISO-standard geometry supports both external and internal turning; selection of a suitable holder and chipbreaker is important for stable internal machining. How does the 0.4 mm corner radius affect the finished component? A 0.4 mm corner radius improves contour smoothness and edge strength, reducing the risk of edge chipping and helping to achieve consistent surface quality with fewer finishing passes. Is the insert compatible with standard ISO toolholders? The insert follows ISO dimensions; compatibility with a given holder depends on form, relief angle, tolerance class, fastening method, size and thickness as indicated in the product data. What is included in the system when planning tool setup? A complete setup typically comprises the ISO insert, a matching external holder or boring bar, and a shim/clamping set with spare screws to enable quick indexing and uninterrupted production. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPGN 110304 DX140 Wendeplatten - Tungaloy
Take advantage of the combination of high-speed performance, long tool life and precise ISO compatibility to maintain a stable turning process; order genuine Tungaloy inserts through Metav Werkzeuge or contact our advisors for application support. TPGN110304 DX140 Tungaloy indexable turning insert — PCD grade for high-speed aluminium and non-ferrous machining, 60° triangular geometry The TPGN110304 DX140 is an ISO-standard indexable turning insert designed for external and internal turning of aluminium, non-ferrous metals and abrasive non-metals, offering high cutting speeds and extended wear life. PCD grade DX140 for long life Optimised for aluminium and non-ferrous metals 60° triangular geometry for versatile turning 0.4 mm corner radius for precise profiles Faster cycle times with PCD technology and optimised geometry The combination of PCD cutting material and the DX140 grade enables consistently higher cutting speeds compared with conventional carbide tips, which reduces cycle times in serial production. Polycrystalline diamond is a sintered, extremely hard cutting layer bonded to a carbide substrate, offering excellent abrasion resistance; this translates into fewer tool changes and predictable batch output. The 60° triangular form provides versatile cutting edges for different turning tasks, while the 0.4 mm corner radius supports accurate profile reproduction and surface finish. Predictable wear behaviour and process stability for economic machining Longer service intervals are achieved through the PCD's resistance to abrasive wear and the DX140 formulation's focus on non-ferrous materials. The result is stable metal removal rates and reduced flank wear, which improve overall process reliability. For workshops processing aluminium castings or high-volume aluminium components, this insert reduces downtime and contributes to a lower cost per part by extending effective tool life and maintaining surface quality over longer runs. Straightforward integration into ISO holders and secure clamping The insert is made to ISO dimensions and must be matched to an appropriate holder by form, relief angle, tolerance class, fastening method, size and thickness. With a plate thickness of 3.18 mm and a size designation of 11 mm, the geometry is compatible with common triangular turning holders. The 11° relief angle aids chip control and prevents rubbing on the tool flank, while the absence of a fixing hole means standard clamp or wedge systems are needed—this ensures a rigid connection and repeatable positioning during index changes. Practical selection and handling guidance to protect performance For best results select a chipbreaker and grade that match the workpiece, machining parameters and rigidity of the setup; while the insert works well for external and internal turning, matching holder rigidity and feed rates to the PCD material is essential to avoid impact loads. The cutting edges deliver superior finish on aluminium and non-ferrous components, but abrasive non-metallic inclusions can accelerate wear; therefore, assess material cleanliness before long-run production. For tailored recommendations on holder selection and cutting data, Metav Werkzeuge advisors are available to provide technical assistance and documentation. Contact Metav Werkzeuge for application advice, availability of genuine Tungaloy inserts and to request technical data tailored to the specific machining task. Technical data Article number: 6808825 SKU: 6808825-Tungaloy Manufacturer SKU: TUN6808825 Facts Geometry: 60° triangular Corner radius: 0.4 mm Relief angle: 11° Thickness: 3.18 mm Size: 11 mm Hole: without hole Materials and features Grade: DX140 Cutting material: PCD (polycrystalline diamond) Substrate: carbide Application: turning; aluminium, non-ferrous metals, abrasive non-metals System: ISO-standard indexable insert; check holder form, relief angle, tolerance, fastening, size and thickness FAQ What materials is this insert best suited for? The TPGN110304 DX140 indexable turning insert from Tungaloy is optimised for aluminium, non-ferrous metals and abrasive non-metallic materials thanks to its PCD cutting layer. Can the insert be used for both internal and external turning? Yes, the ISO-standard triangular insert is suitable for external and internal turning operations when mounted in a compatible holder and paired with the correct chip control solution. What does the DX140 designation indicate? DX140 denotes the PCD grade tuned for high-speed machining of aluminium and similar alloys; the grade emphasises abrasion resistance and extended service life. How should the insert be matched to a toolholder? Compatibility depends on holder form, relief angle, tolerance class, fastening method, size and thickness; the TPGN110304 requires a holder that accepts a 60° triangular insert with 3.18 mm thickness. What are the key geometry details of this insert (radius, angle, SKU)? The insert has a 0.4 mm corner radius, 11° relief angle, 60° triangular form and is listed under SKU 6808825-Tungaloy as the TPGN110304 DX140 Tungaloy indexable turning insert. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPGN 110304 GH110 Wendeplatten - Tungaloy
Take advantage of the combination of GH110 grade performance, a 0.4 mm corner radius and ISO compatibility for predictable tool life and stable turning cycles. Order the insert directly via Metav Werkzeuge or consult the team for application-specific advice. TPGN 110304 GH110 Tungaloy indexable insert for turning A TPGN110304 GH110 indexable turning insert engineered for ISO-series external and internal turning applications in production environments. ISO-standardised triangular insert GH110 grade for balanced wear resistance 0.4 mm corner radius for versatile edge strength 11° clearance angle and 60° included angle Consistent productivity through optimised grade and edge geometry The combination of the GH110 cutting-grade and cemented carbide substrate delivers a reliable balance of wear resistance and toughness that supports sustained machining performance. The 0.4 mm corner radius strengthens the cutting edge against mechanical and thermal stress, reducing edge chipping in interrupted cuts while maintaining acceptable surface finish levels. This balance enables longer periods between index changes and lowers overall tool consumption per workpiece, improving process efficiency on batch and single-piece production alike. Fast integration with ISO turning systems for minimal downtime Designed to match ISO-standard geometries, the triangular form and defined dimensions simplify retrofitting into existing toolholder inventories. The insert’s 11° clearance and 60° included angle ensure predictable engagement with standard holders, while a plate thickness of 3.18 mm supports stable clamping without requiring modified fixtures. As a result, changeover time and setup complexity are reduced, allowing machine time to be used more productively and shortening the path to consistent part quality. Guidance on materials and application selection for dependable results This insert is intended for turning operations and performs best when the insert grade and any chipbreaker are chosen to match workpiece material and machining stability. The GH110 grade complements a wide range of steels and general engineering materials by offering stable chip formation and dependable edge life. For less rigid setups or difficult interrupted cuts, pairing this geometry with a more robust holder and optimised cutting parameters preserves edge integrity and increases process security. For reliable, high‑productivity turning with Tungaloy quality, contact Metav Werkzeuge for availability and tailored recommendations at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6808819 Manufacturer SKU: TUN6808819 SKU: 6808819-Tungaloy Item label: TPGN110304 GH110 Tungaloy indexable insert Model series: ISO turning inserts Facts Insert size: 11 Plate thickness: 3.18 mm Corner radius: 0.4 mm Clearance angle: 11° Included angle: 60° Manufacturer article number: 6808819 Features and compatibility Shape: triangular Hole style: without hole Grade/coating: GH110 Material: carbide Intended use: turning (external and internal) ISO-series interchangeable insert Compatibility depends on holder form, clearance, tolerance class, fastening and size FAQ What applications suit this TPGN110304 GH110 insert? This TPGN110304 GH110 indexable insert is intended for external and internal turning where a balanced combination of wear resistance and edge stability is required. Can the insert be used with standard ISO toolholders? Yes, the insert follows ISO-series geometry and is compatible with holders that match its form, clearance, tolerance, fastening type and size. What does the GH110 designation mean for machining performance? The GH110 grade denotes a Tungaloy cutting material that offers a compromise between toughness and wear resistance, suitable for general turning tasks and stable chip formation. How does the 0.4 mm corner radius affect surface finish and edge life? A 0.4 mm corner radius improves edge strength for interrupted or heavy cuts while maintaining reasonable surface finish, extending edge life compared with sharper radii. Is a chipbreaker included with this insert? This specific insert is supplied without a dedicated chipbreaker; chip control should be achieved by selecting an appropriate insert geometry or adjusting cutting parameters. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPGN 110304 LX10 Wendeplatten - Tungaloy
Combine the LX10 wear resistance with precise geometry for dependable turning performance; the insert supports repeatable contours and stable edge life. Order or request application advice via Metav Werkzeuge for fast availability and expert guidance. TPGN110304 LX10 Tungaloy turning insert, triangular, ISO size 11 A TPGN110304 LX10 insert engineered for ISO‑standard turning applications, designed for both external and internal machining. ISO‑standard triangular insert LX10 Tungaloy grade for wear and edge stability 11° relief angle for secure chip flow 0.4 mm corner radius for precise contours Reliable wear resistance for continuous production The LX10 cutting grade combines carbide hardness with controlled toughness to deliver consistent edge life in turning operations. This balance of properties reduces unplanned tool changes and supports steady production cycles. The grade is optimised to resist abrasive wear while maintaining sufficient fracture resistance for common turning tasks, making it suitable for a wide range of materials when the correct chipbreaker and parameters are selected. The result is improved process economy through longer tool life and predictable machining intervals. Geometry and compatibility that secure part quality A triangular form with an included angle of 60°, a 0.4 mm corner radius and 11° relief produces defined contours and repeatable dimensional results. The ISO‑standard construction ensures the insert seats consistently in ISO holders; compatibility is determined by form, relief, tolerance class, clamping method, size and thickness. The 3.18 mm thickness provides sufficient support for the cutting edge under typical turning loads. These features combine to make the insert a reliable choice where stable geometry and positional repeatability are essential for part tolerances. Process stability through informed selection and system integration Although this variant is supplied without a chipbreaker, process stability is achieved by matching the LX10 grade and insert geometry to the workpiece material and cutting conditions. For external and internal turning, the complete system comprises the ISO insert, a matched external holder or boring bar, a support pad or clamping set, and replacement screws — items that are specified to work together to maintain clamping integrity and repeatability. Selecting the appropriate holder and cutting data reduces vibration, improves surface finish and lowers cycle time, delivering measurable productivity gains. Practical advantages for workshop and production environments Indexable inserts like this one simplify inventory management and maintenance: worn corners are indexed rather than regrinded, and spare inserts are compact to store. The Tungaloy carbide designation and ISO form facilitate cross‑referencing in tool portfolios and support consistent performance across shifts. Spare availability and the predictability of insert life contribute to reduced machine downtime and easier planning of tool change intervals, supporting both small workshops and larger production lines that demand reproducible outcomes. Contact Metav Werkzeuge for application-specific recommendations on the LX10 grade and matching holders; email info@metav-werkzeuge.com or call +49 2822 7131930 for availability and technical advice Technical data Article number: 6852220 Manufacturer SKU: TUN6852220 Stock SKU: 6852220-Tungaloy Model series: ISO indexable turning inserts Material: carbide Facts Relief angle: 11° Corner radius: 0.4 mm Plate thickness: 3.18 mm Plate size: 11 Included angle: 60° Plate form: triangular Special features Grade: LX10 Carbide type: Tungaloy grade Application: turning (external and internal) Chipbreaker: none Hole: none System composition: ISO insert, external holder or boring bar, support pad/clamping set, replacement screws ISO compatibility determined by form, relief, tolerance class, clamping, size and thickness FAQ What materials is this insert suited for? The LX10 grade is engineered as a versatile carbide solution; the TPGN110304 LX10 insert is best matched to materials where a combination of wear resistance and edge stability is required, with the final choice depending on workpiece material and cutting conditions. Is the insert compatible with standard ISO holders? Compatibility is governed by form, relief, tolerance class, clamping and size; the triangular ISO form of the TPGN110304 LX10 insert is designed to fit ISO‑standard holders that accept the specified dimensions. Why is there no chipbreaker fitted? This variant is supplied without a chipbreaker so that users can select the chip control geometry best suited to the component material, machining strategy and rigidity of the setup. How does the corner radius affect surface finish? A 0.4 mm corner radius provides a balance between strength and fine contouring: it increases edge robustness while allowing precise profiles and improved surface integrity compared with larger radii. What components are needed for a complete tooling solution? A complete system comprises the ISO indexable insert, a matching external holder or boring bar, a support pad or clamping set and the designated replacement screws to secure the insert consistently. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPGN 110304 LX11 Wendeplatten - Tungaloy
Benefit from the combination of LX11 wear resistance and the precise 11° relief angle for stable cutting edges and consistent turning results; the carbide grade balances toughness and edge life to keep production flowing. Order the insert directly via Metav Werkzeuge or consult the technical team for application advice. TPGN 110304 LX11 Tungaloy turning insert — triangular ISO turning insert for external and internal turning TPGN110304 LX11 is an ISO-standard triangular turning insert designed for reliable external and internal turning, offering a balanced mix of wear resistance and edge stability for a wide range of machining tasks TPGN 110304 ISO format LX11 Tungaloy carbide grade 11° relief angle for consistent cutting 0.4 mm corner radius for precise finishes Stable cutting performance through wear-balanced carbide The indexable insert uses the LX11 Tungaloy carbide grade to deliver a controlled combination of wear resistance and toughness that prolongs tool life under typical turning loads. This grade is formulated to maintain a robust cutting edge while resisting abrasive wear, which reduces the frequency of index changes and supports predictable cycle times. For production lines where repeatability is essential, the insert’s material properties translate directly into less downtime and steadier output. Consistent surface quality with optimised geometry The triangular shape and defined 0.4 mm corner radius produce reliable surface finishes on both roughing and light finishing passes. The 11° relief angle reduces rubbing at the flank, lowering cutting forces and improving stability in interrupted cuts. In practical terms, the relief angle is the clearance behind the cutting edge that prevents interference with the workpiece; a proper angle helps maintain edge life and dimensional accuracy. The ISO-compliant format also ensures interchangeability with standard holders, simplifying tool inventory. Simple integration into established turning systems Compatibility with a holder is determined by form, relief angle, tolerance class, fastening method, size and thickness; the ISO format eases selection of a matched external holder or boring bar. The insert is supplied without a chipbreaker and without a hole, which suits applications where the holder or clamping system defines the chip control strategy. Its 3.18 mm thickness and triangular geometry provide secure clamping and repeatable seating, making it suitable for conventional lathe setups and CNC turning centres when paired with the appropriate external holder or bar. For technical guidance on applying the Tungaloy LX11 grade in high-throughput turning, contact Metav Werkzeuge for specification matching and rapid supply — email info@metav-werkzeuge.com or call +49 2822 7131930 for immediate advice. Technical data Article number: 6808820 Manufacturer SKU: TUN6808820 Shop SKU: 6808820-Tungaloy Designation: TPGN110304 Grade: LX11 Material: Carbide Facts Relief angle: 11° Corner radius: 0.4 mm Plate thickness: 3.18 mm Plate size: 11 Included angle: 60° Special features ISO-standard triangular turning insert Intended for external and internal turning No chipbreaker No hole Compatibility depends on form, relief angle, tolerance class, fastening, size and thickness FAQ What materials is this insert suited for? The TPGN110304 LX11 insert from Tungaloy is formulated as a versatile carbide grade for a wide range of turning tasks; material-specific chipbreaker selection and cutting parameters should be chosen according to the workpiece material. Is the insert compatible with standard ISO holders? The insert follows the ISO designation and therefore fits holders designed for the TPGN110304 format, provided that the holder matches the required form, relief angle and clamping dimensions. How does the 11° relief angle affect cutting? An 11° relief angle reduces flank contact and cutting forces, which helps to preserve edge life and improve stability during both continuous and interrupted turning operations when using the Tungaloy grade. Can this insert be used for finishing passes? Yes; the 0.4 mm corner radius offers a balance between strength and the ability to produce fine surface finishes, making the insert suitable for light finishing as well as general turning. What does the absence of a chipbreaker mean for chip control? The insert is supplied without a chipbreaker, which allows chip control to be managed by the holder geometry and cutting conditions, offering flexibility for bespoke chip evacuation strategies. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPGN 110304 LX21 Wendeplatten - Tungaloy
Take advantage of the combination of carbide durability, the LX21 grade for enhanced wear resistance and the ISO‑standard triangular geometry for consistent clamping and reliable turning results; order the insert directly via Metav Werkzeuge or consult our advisors for application matching. TPGN 110304 LX21 Tungaloy turning insert — triangular ISO insert, 11° clearance The TPGN110304 LX21 is a triangular ISO turning insert designed for external and internal turning operations, offering a 0.4 mm corner radius for fine contouring and predictable tool life. ISO‑standard triangular insert LX21 grade for wear resistance 0.4 mm corner radius for fine contours 11° clearance angle for stable cutting Optimised performance for productive turning The LX21 grade, developed for Tungaloy, combines wear resistance and edge stability to extend cutting intervals and reduce downtime. In practice, this means fewer insert changes and a steadier surface finish on turned components. The carbide substrate delivers rigid support for the cutting edge, while the geometry balances chip formation and edge strength; this results in consistent cycle times and improved process reliability in a production environment. Predictable clamping and straightforward compatibility The insert follows ISO dimensions and mounting logic, so matching a proper holder or boring bar is determined by form, clearance, tolerance class, fastening method, size and thickness. The triangular 11 format and the absence of a hole simplify selection for many standard external and internal turning holders. With a plate thickness of 3.18 mm and standard tolerance control, the system ensures reproducible seating and torque transmission, which supports stable cutting conditions and repeatable part accuracy. Geometry that supports surface finish and tool life A 0.4 mm corner radius and an included angle of 60° provide a good compromise between edge strength and finish capability: small radii allow finer detail and lower cutting forces in finishing passes, while the chosen clearance of 11° reduces rubbing and heat at the flank face. The insert has no integrated chipbreaker, so chip control is addressed by selecting the appropriate chip‑forming features and grade for the workpiece and cutting conditions, allowing flexible process optimisation for both roughing and finishing tasks. Practical selection and application guidance Intended specifically for turning, the insert is best used where repeatable performance and straightforward tool management are priorities. Choose the right chipbreaker and application settings according to the workpiece material and stability of the set‑up. Where chip control or specialised cutting behaviour is required, pair the insert with a compatible holder and the correct clamping kit; spare screws and underlay shims are recommended items to keep as part of a reliable maintenance routine. For reliable productivity with Tungaloy’s LX21 grade and ISO compatibility, contact Metav Werkzeuge for tailored advice and availability via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 6808821 Manufacturer SKU: TUN6808821 Brand: Tungaloy Model series: ISO‑Drehwendeschneidplatten Product designation: TPGN110304 LX21 Tungaloy‑insert Facts Included angle: 60° Corner radius: 0.4 mm Clearance angle: 11° Plate thickness: 3.18 mm Plate size: 11 Special features Material: carbide Grade: LX21 Plate shape: triangular Hole: without hole Chipbreaker: without chipbreaker Intended use: turning (external and internal) ISO‑standard geometry for holder compatibility FAQ What applications is this insert suitable for? The TPGN110304 LX21 insert is designed for external and internal turning; it is intended where reliable edge stability and repeatable clamping are required. Does the insert have a chipbreaker or a hole for mounting? This insert is supplied without a chipbreaker and without a hole; clamping is achieved via the matching ISO holder and clamping kit. How does the LX21 grade affect tool life? The LX21 grade enhances wear resistance and edge stability, which can extend intervals between indexings and support more consistent surface quality under stable cutting conditions. Which geometry parameters should be checked for holder compatibility? Compatibility is governed by the insert form, clearance angle, tolerance class, fastening method, size (11) and thickness (3.18 mm); matching these ensures correct seating and secure clamping. Can this insert be used for finishing passes? Yes; the 0.4 mm corner radius and 11° clearance allow fine contouring and good surface finish in finishing operations when cutting parameters are set accordingly. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
TPGN 110304 TH10 Wendeplatten - Tungaloy
Take advantage of the combination of low cutting forces, clean surface finish and ISO compatibility for efficient turning operations; order the TPGN110304 TH10 indexable insert via Metav Werkzeuge or consult our specialists for tailored recommendations. TPGN 110304 TH10 indexable insert for turning — Tungaloy, uncoated carbide, 11° relief TPGN 110304 TH10 is an ISO‑compliant triangular indexable insert designed for external and internal turning, providing a sharp uncoated carbide grade optimised for non‑ferrous materials. Uncoated carbide TH10 grade Triangle 60° geometry 0.4 mm corner radius 11° relief angle and 3.18 mm thickness Consistent, efficient turning with reduced cutting forces The indexable insert delivers measurable process benefits in high‑throughput turning: the uncoated carbide composition and the TH10 grade are formulated to keep cutting forces low and to produce a clean surface finish when machining non‑ferrous alloys. For operations where chip control and surface quality matter, the combination of a triangle 60° geometry and a 0.4 mm corner radius supports stable cutting conditions and predictable tool life. These characteristics translate into shorter cycle times and fewer rework operations, improving overall productivity. Simple selection and secure clamping across ISO systems Compatibility with toolholders follows ISO rules and depends on form, 11° relief, tolerance class, fastening method, size and thickness. The insert fits standard ISO turning holders when the holder matches the insert geometry and dimensions, enabling straightforward integration into existing tool systems. As the insert is an ISO‑conforming component, toolroom planners can rely on interchangeability and easily specify the correct holder and mounting kit to achieve repeatable set‑ups. Why the TH10 uncoated grade suits non‑ferrous turning The sharp edge of the TH10 grade provides low cutting resistance, which is particularly advantageous for materials that tend to smear or adhere to the cutting edge. Uncoated cemented carbide maintains a keen edge for clean shearing, reducing built‑up edge and improving surface integrity on brass, aluminium and similar alloys. With no coating layer, the insert offers consistent thermal behaviour and simplifies decisions on cutting parameters where minimal adhesive wear is expected. Practical handling, application and system considerations The triangular shape with a 60° included angle gives three usable corners per insert, improving cost efficiency in serial production. The 3.18 mm plate thickness and the specified geometry ensure sufficient rigidity for conventional and semi‑finishing operations. Although this insert does not include a chipbreaker, selecting appropriate feeds and speeds for the workpiece and machine rigidity will optimise chip formation; consider pairing with a holder and clamping set that matches the insert’s tolerance class for best results. For reliable supply and expert advice on selecting the right Tungaloy TH10 insert for specific turning tasks, contact Metav Werkzeuge — info@metav-werkzeuge.com or call +49 2822 7131930 to order or discuss technical options Technical data Article number: 6808823 SKU: 6808823-Tungaloy Manufacturer SKU: TUN6808823 Model series: ISO turning indexable inserts Name: TPGN110304 TH10 Facts Corner radius: 0.4 mm Plate thickness: 3.18 mm Relief angle: 11° Included angle: 60° Inscribed circle / size: 11 Hole: without hole Special features Material: carbide (cemented carbide) Grade: TH10 (uncoated) Plate form: triangular Chipbreaker: none Intended application: turning (external and internal) Compatibility determined by form, relief angle, tolerance class, fastening, size and thickness FAQ What materials is this insert intended for? The TPGN110304 TH10 insert is designed primarily for non‑ferrous materials and applications where an uncoated carbide cutting edge supports low cutting forces and clean surface finishes. Can the insert be used in any ISO turning holder? The insert is ISO‑compliant and fits ISO turning holders that match its geometry, 11° relief, tolerance class, fastening method, size and thickness; correct holder selection is essential for secure clamping. How many cutting corners are available per insert? The triangular TPGN110304 geometry provides three usable corners per insert, increasing cost efficiency in serial production. Is a chipbreaker integrated in this insert? This variant is supplied without a chipbreaker; chip formation should be managed by selecting appropriate feed, speed and a suitable holder design. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
TPGN 110308 BX360 Wendeplatten - Tungaloy
Take advantage of the BX360 CBN grade for consistent finishing on hardened parts combined with the stability of an ISO triangular insert; the geometry and clearance ensure predictable chip flow and long tool life. Order the insert directly via Metav Werkzeuge or contact our consultants for tailored recommendations. TPGN 110308 BX360 Tungaloy indexable turning insert – CBN for turning The TPGN 110308 BX360 indexable insert is designed for precision external and internal turning of hardened steels, offering a robust solution for high-hardness finishing operations. CBN grade BX360 for hardened steels ISO triangular geometry for stable cutting 11° clearance angle for secure chip flow 0.8 mm corner radius for fine finishing Increase throughput on hardened components with a CBN finishing grade The combination of cubic boron nitride (CBN) cutting material and the BX360 grade delivers high wear resistance where conventional carbide wears prematurely. This insert is optimised for abrasive, hardened-steel finishing, so cycle times can be reduced through higher allowable cutting speeds and longer intervals between tool changes. The indexable geometry reduces setup complexity because replacements maintain the same cutting datum, which supports predictable process planning and improved overall equipment effectiveness. Streamlined fit-up and repeatable set-up for workshop productivity Compliance with the ISO designation and the triangular form factor means compatibility is governed by shape, free clearance, tolerance class, clamping method, size and thickness; matching these parameters ensures secure seating and repeatable performance. The insert is supplied without a hole, which influences clamping method selection and may be preferred for certain external-holder systems. Clear specification of the 11° clearance and the triangular interface simplifies holder selection and reduces trial-and-error during tool qualification, helping maintenance teams and operators to achieve consistent results quickly. Achieve superior surface finish and extended life through geometry Fine finishing is supported by the 0.8 mm corner radius and the insert’s consistent rake geometry; a modest corner radius limits cutting forces while still producing a smooth profile on high-hardness components. The 3.18 mm plate thickness and carbide substrate provide mechanical stability under interrupted cuts and steady-state turning alike. When used as intended for finishing hardened steels—and, depending on the variant, for some cast iron applications—the insert offers a reliable balance between precision and durability, helping to protect production schedules and reduce scrap rates. For personalised application advice on the Tungaloy BX360 CBN inserts or to order through Metav Werkzeuge, please contact our technical team at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6808834 Manufacturer SKU: TUN6808834 Brand: Tungaloy Type designation: TPGN110308 Model series: ISO indexable turning inserts Dimensions & angles Corner radius: 0.8 mm Clearance angle: 11° Inscribed circle / size: 11 mm Thickness: 3.18 mm Included angle: 60° Materials & features Grade: BX360 Cutting material: cubic boron nitride (CBN) Substrate: carbide Shape: triangular Hole: without hole Application: turning Intended for: hardened steels; depending on variant, cast iron FAQ What materials is this insert intended for? The TPGN 110308 BX360 insert is primarily intended for hardened steels; the BX360 CBN grade provides enhanced wear resistance for finishing high-hardness components. Which toolholders are compatible with this insert? Compatibility is determined by ISO shape, size, thickness and the clamping method; use a matching ISO triangular turning holder rated for the insert dimensions and tolerance class. What are the key geometric specifications to consider? Key specifications are a 0.8 mm corner radius, 11° clearance angle, 3.18 mm thickness, 11 mm size and a 60° included angle. How does the BX360 CBN grade benefit production? BX360 CBN improves process stability and tool life in abrasive, hardened-steel finishing operations, enabling higher cutting speeds and longer intervals between index changes. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com