TPGR 110302 NS9530 Wendeplatten - Tungaloy
Take advantage of the combination of precise finishing performance, low cutting forces and ISO compatibility for consistent production results; the uncoated NS9530 cermet grade delivers a sharp cutting edge and superior surface quality in continuous finishing cuts. Order the insert directly via Metav Werkzeuge or contact their consultants for application support. TPGR 110302 NS9530 turning insert — Tungaloy, uncoated cermet, finishing grade The TPGR110302 NS9530 Tungaloy ISO triangular turning insert is designed for finishing steel with a sharp cutting edge and low cutting forces, suited to continuous cuts and small depths of cut. Sharp cutting edge for fine surface finish Uncoated cermet grade NS9530 for low cutting forces ISO TPGR form, triangular 11 mm size 11° clearance angle for continuous cuts Single-sided chipbreaker for finishing High-efficiency finishing for steel components The insert is engineered for consistent finishing performance. With an uncoated cermet substrate in grade NS9530, the geometry and edge form reduce cutting forces and promote excellent surface integrity when turning steels with continuous chips. The result is a lower need for secondary operations and predictable machining output, which supports tighter process planning and higher first-pass yields. The ISO-standard geometry ensures repeatable positioning and compatibility with standard clamping kits, contributing to shorter tool-change times and improved line throughput. Clear guidance on holder compatibility and system setup Compatibility with a clamping system depends on the insert's form, clearance angle, tolerance class, fastening method, size and thickness. The TPGR shape and its 11° clearance angle require an appropriate TPGR-compatible external holder or boring bar, plus the required shim, clamp set and replacement screw for safe mounting. Clarifying these parameters early in the planning phase reduces setup iterations and ensures the insert sits at the correct geometry for optimum cutting conditions and tool life. Why uncoated cermet benefits finishing operations Cermet grades excel where a sharp cutting edge and stable wear behaviour matter for surface finish. The NS9530 grade used here combines low built-up edge tendency with a fine-grain cutting surface that sustains dimensional accuracy under continuous feed conditions and small depth of cut operations. The single-sided chipbreaker is optimised for controlled chip formation during finishing passes, helping maintain machine cleanliness and predictable chip flow without aggressive cutting forces. Practical application notes and reliability considerations This ISO-format triangular insert is suitable for external and internal turning where surface quality is the primary goal. The specified 0.2 mm corner radius supports fine-profile work and close tolerance finishing, while the 3.18 mm plate thickness contributes to stable clamping. The insert is supplied as an original Tungaloy item with the manufacturer’s article number listed for procurement and traceability. For operators seeking dependable finishing solutions, the combination of geometry, material and chip control offers a balanced approach between surface integrity and process robustness. Contact Metav Werkzeuge for tailored recommendations on holders, clamping kits and process parameters or to secure original Tungaloy TPGR inserts for production use Technical data Article number: 6998025 Facts Manufacturer SKU: TUN6998025 Size: 11 mm Thickness: 3.18 mm Corner radius: 0.2 mm Clearance angle: 11° Included angle: 60° Special features Material: carbide Grade/coating: NS9530 (uncoated cermet) Insert form: triangular Chipbreaker: single-sided Hole: without hole Series: ISO turning indexable inserts Application: turning FAQ What materials is this insert intended for? The TPGR110302 NS9530 insert is a finishing grade intended primarily for steel applications; the uncoated NS9530 cermet offers low cutting forces and high surface quality during continuous cuts. How is compatibility with a holder determined? Compatibility depends on the insert form, clearance angle, tolerance class, fastening method, size and thickness; matching a TPGR-compatible external holder or boring bar plus the correct shim and clamp set is essential for secure mounting. What cutting tasks suit the single-sided chipbreaker? The single-sided chipbreaker is optimised for finishing passes where controlled chip formation and surface integrity are priorities, especially with small depths of cut and continuous feeds. Which dimensions should be checked before ordering replacement inserts? Confirm size (11 mm), thickness (3.18 mm), corner radius (0.2 mm) and the TPGR form to ensure correct seating in the chosen holder and consistent cutting geometry. Is this an original Tungaloy product and how is it identified? Yes; this is an original Tungaloy ISO turning insert listed under the manufacturer’s article number 6998025 and SKU TUN6998025 for traceability and procurement. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPGR 110304 NS9530 Wendeplatten - Tungaloy
Engineered for high-quality finishing in steel turning, the combination of the NS9530 uncoated cermet grade and a 0.4 mm corner radius delivers low cutting forces and consistently superior surface quality; ISO conformity and straightforward holder compatibility reduce setup time. Order the TPGR110304 NS9530 Tungaloy insert directly via Metav Werkzeuge or ask our consultants if needed. TPGR 110304 NS9530 — Tungaloy turning insert for finishing steel The TPGR110304 NS9530 Tungaloy insert is an ISO-format triangular indexable insert designed for finishing and continuous turning of steel, offering a sharp cutting edge and reliable chip control. ISO triangular insert TPGR110304, 60° included angle Uncoated cermet NS9530 for superior surface finish Sharp edge, low cutting forces for continuous cuts 0.4 mm corner radius, one-sided chipbreaker Consistent surface quality through material and edge geometry The NS9530 grade, an uncoated cermet, is specified for finishing operations on steel and is chosen for its combination of hardness and resistance to built-up edge formation. With a sharp cutting edge and a 0.4 mm corner radius, the insert reduces cutting forces and promotes a fine surface finish; this reduces the need for downstream finishing and supports tighter part tolerances. Cermet behaviour under finishing conditions is characterised by stable edge integrity during continuous cuts and small depths of cut, which contributes to repeatable component quality. Process stability and predictable chip control A single-sided chipbreaker is integrated to control chip formation in continuous turning, improving evacuation and minimising surface damage. The insert’s 11° clearance angle reduces flank rubbing, which supports lower cutting temperatures and more stable cutting forces. These attributes are selected to increase production uptime and to make tool life more predictable, allowing process planners to rely on consistent removal rates and finish quality rather than frequent unexpected tool changes. ISO compatibility and practical system setup Produced in an ISO format, the insert fits into standard turning systems but requires verification of holder compatibility by form, clearance angle, tolerance class, fastening method, size and thickness. The recommended system comprises an ISO insert, a suitable external holder or boring bar, a shim/clamp set and replacement screws. This modular approach permits quick exchange and reduces machine downtime while preserving positional accuracy in serial production. Application guidance for turning steel parts The geometry and uncoated cermet substrate of this finishing grade are tailored to continuous cutting and small depths of cut on steel, where high surface quality is demanded. Selection of the appropriate chipbreaker and matching holder rigidity is critical for best results; the machining strategy should favour stable clamping and conservative feed steps for long, uninterrupted cuts. For mixed applications, choice of a different chipbreaker or grade may be preferable, depending on workpiece material and cut conditions. For reliable finishing in steel turning, request the TPGR110304 NS9530 insert from Metav Werkzeuge to secure the right grade and mounting components with expert guidance. Technical data Manufacturer article number: 6998026 SKU: 6998026-Tungaloy Manufacturer SKU: TUN6998026 Designation: TPGR110304 NS9530 Tungaloy insert Series: ISO-Drehwendeschneidplatten Core specifications Included angle: 60° Clearance angle: 11° Corner radius: 0.4 mm Plate size: 11 mm Plate thickness: 3.18 mm Hole: none Features and application Uncoated cermet grade NS9530 Single-sided chipbreaker Triangular plate form Compatibility: ISO turning holders (form and tolerance dependent) Application: turning — finishing grade for steel Material indication: carbide substrate FAQ What materials is this insert designed for? The TPGR110304 NS9530 insert is specified as a finishing grade for steel and is optimised for continuous cuts with small depths of cut. How does the NS9530 cermet grade affect surface finish? The NS9530 uncoated cermet provides a sharp cutting edge and resistance to built-up edge, which together support a superior surface quality on turned steel components. Which holders are required for mounting this insert? Holder compatibility depends on form, clearance angle, tolerance class, fastening method, size and thickness; the insert is intended for use with ISO-format turning holders and appropriate clamping sets. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPGR 160304 NS9530 Wendeplatten - Tungaloy
Take advantage of the finishing-grade performance and predictable ISO fit: the uncoated cermet NS9530 yields low cutting forces and an improved surface finish, while the standard TPGR form and dimensions ensure straightforward insertion and secure clamping. Order the insert directly via Metav Werkzeuge or consult our advisors for holder compatibility. TPGR 160304 NS9530 — ISO turning insert by Tungaloy, finishing grade, triangular form A TPGR 160304 NS9530 triangular turning insert designed for precision finishing in turning operations, offering a sharp cutting edge and chip control for continuous cuts and small depths of cut ISO-turning insert TPGR 160304 Uncoated cermet NS9530 for finish turning 0.4 mm corner radius for superior surface One-sided chipbreaker for continuous cuts Consistent finish and low cutting loads for turning operations The insert is specified as an uncoated cermet in grade NS9530, a finishing class developed for turning steel with a sharp cutting edge and reduced cutting forces. This composition is chosen to deliver a high surface finish with minimal tool-induced vibration when used at small depths of cut and in continuous cutting conditions. The combination of material and geometry reduces the need for heavy cutting parameters, which supports consistent part quality and repeatable results across batches. Where process stability and surface integrity are priorities, this insert is a reliable finishing solution. Predictable fit, economical use and surface-sensitive geometry Compatibility with ISO holders is determined by form, clearance angle, tolerance class, clamping and thickness; the standardised TPGR shape simplifies selection and set-up. The triangular form provides multiple usable edges, improving economy per insert, while the 0.4 mm corner radius contributes directly to smoother finishes and gentler tool–workpiece interaction. The insert’s 11° clearance and 60° included angle are optimised for finishing passes and help to maintain a sharp edge for better dimensional control. A one-sided chipbreaker supports controlled chip formation in continuous turning, reducing the risk of surface damage and maintaining machining rhythm. Easy integration into turning systems and reduced downtime This ISO insert is intended for use within a conventional insert system composed of the ISO plate, a matching external holder or boring bar, a shim/clamp set and replacement screws; compatibility is defined by the insert’s form and dimensions, enabling straightforward replacement and predictable clamping behaviour. The moderate 3.18 mm thickness and 16 mm size make it suitable for many standard holders, helping to reduce the variety of spare parts in stock. Choose the chipbreaker and grade according to workpiece material and machine stability to ensure optimal performance and prolonged tool life. For finishing-critical turning tasks, request the TPGR 160304 NS9530 from Metav Werkzeuge and let our specialists advise on the correct holder and chipbreaker for your application: email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6998027 Manufacturer SKU: TUN6998027 Model series: ISO turning inserts Name: TPGR160304 NS9530 Tungaloy insert Manufacturer: Tungaloy Dimensions & core data Insert size: 16 mm Thickness: 3.18 mm Corner radius: 0.4 mm Clearance angle: 11° Included angle: 60° Design & special features Triangular plate One-sided chipbreaker Uncoated cermet grade NS9530 For finishing of steel, continuous cuts, small depths of cut Without hole Material: carbide FAQ Which materials is this insert suitable for? The TPGR160304 NS9530 is a finishing-grade uncoated cermet designed primarily for steel, especially where low cutting forces and superior surface finish are required during continuous cuts and small depths of cut. Will the insert fit standard ISO holders? Compatibility is achieved when the holder matches the insert form, clearance angle, tolerance class, clamping method, size and thickness; the TPGR form follows ISO standards to enable straightforward integration with matching holders and boring bars. How many cutting edges are available per insert? The triangular plate provides three usable cutting corners, allowing economical rotation of edges before replacement. What benefits does the NS9530 grade provide? NS9530 is an uncoated cermet finishing grade that offers a sharp cutting edge, low cutting forces and enhanced surface quality for finishing operations on steel. Can this insert be used for internal as well as external turning? Yes; the insert is suitable for external and internal turning when mounted in the appropriate external holder or boring bar and paired with the correct clamp and shim set. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPGR 160304 NS9530 Wendeplatten - Tungaloy
Optimise turning performance with the combination of uncoated cermet NS9530 and a 0.4 mm corner radius for superior surface quality and low cutting forces. Benefit from ISO compatibility and predictable fitting parameters; order the insert directly via Metav Werkzeuge or consult their specialists for material-specific advice. TPGR160304 NS9530 ISO turning insert for turning — Tungaloy The TPGR160304 NS9530 is a triangular ISO indexable insert for external and internal turning, engineered as a finishing grade for steel with a sharp cutting edge and low cutting forces Sharp cutting edge for superior surface finish Uncoated cermet grade NS9530 for fine finishing 0.4 mm corner radius for precise profiles Compatible with ISO triangular turning holders Fine finishing on steel with lower cutting forces The uncoated cermet composition of this insert is formulated for finishing operations on steel, providing a sharp cutting edge that reduces cutting forces and improves surface integrity. As a finishing grade, NS9530 is optimised for continuous cuts and small depths of cut, delivering consistent surface roughness without aggressive edge build-up. The combination of a hard cermet substrate and a honed geometry enables stable metal removal with reduced chatter, making it well suited to precision components where dimensional tolerance and finish are critical. Predictable chip control and repeatable results Equipped with a one-sided chipbreaker and a precise corner radius of 0.4 mm, the insert supports controlled chip formation in finishing passes. Controlled chips reduce the risk of built-up edge and heat concentration, which in turn extends the effective cutting window and contributes to repeatable part quality. The insert’s geometry and grade yield a reliable interaction between tool and workpiece, improving process stability and lowering the incidence of scrap in serial production. Designed for easy integration into ISO tooling systems Compatibility with the ISO system is determined by form, rake angle (11°), tolerance class, clamping and size. The insert’s triangular shape and standard 16 mm size allow straightforward fitting in most ISO triangular holders; thickness and mounting type must match the chosen carrier. This standardisation simplifies inventory management and reduces set-up time across different lathes, enabling faster changeovers and consistent seating and repeatability in production environments. Practical application and selection guidance For finishing on steel, select this grade when the goal is high surface quality and low cutting forces under continuous-cut conditions. The modest thickness and the honed geometry suit small radial engagements and light feeds. When pairing the insert with a holder, consider the required tolerance class and clamping style to ensure stable fixation. Where higher feeds or interrupted cuts are expected, evaluate tougher grades or coated alternatives; for fine finishing and profile accuracy, this insert provides an efficient balance of edge sharpness and life. Choose the Tungaloy NS9530 finishing insert for reliable surface quality and easy ISO integration — contact Metav Werkzeuge for specific holder recommendations and application matching. Technical data Article number: 6998028 SKU: 6998028-Tungaloy Manufacturer SKU: TUN6998028 Model series: ISO turning inserts Core data Size: 16 mm Thickness: 3.18 mm Corner radius: 0.4 mm Rake angle: 11° Included angle: 60° Features Material: carbide Grade: NS9530 Cutting material: uncoated cermet Chipbreaker: one-sided Shape: triangular Hole: without hole Application: turning FAQ What materials is this insert best suited for? The NS9530 grade is optimised for finishing on steel; the TPGR160304 NS9530 insert excels in continuous cuts and small depths of cut for superior surface finish. How does the 0.4 mm corner radius affect performance? A 0.4 mm corner radius delivers a balance between profile precision and edge strength, improving finished surface quality while maintaining acceptable edge life for finishing passes. Is the insert compatible with standard ISO triangular holders? Yes — the triangular form and 16 mm size are compatible with ISO triangular turning holders provided the holder matches the insert thickness, clamp style and tolerance class. What does uncoated cermet mean for cutting performance? Uncoated cermet offers a very sharp cutting edge and excellent surface finish capability; it is particularly effective for continuous finishing operations on steel where low cutting forces are required. Which geometry parameters should be checked for holder compatibility? Verify form, rake angle (11°), clamp/tolerance class, insert thickness (3.18 mm) and size (16 mm) to ensure correct seating and repeatable clamping performance. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPGR 160308 NS9530 Wendeplatten - Tungaloy
Take advantage of the combination of a finely honed cutting geometry, stable chip control and ISO compatibility for consistent finishing performance; order the insert directly via Metav Werkzeuge or consult the technical advisors for application-specific recommendations. TPGR 160308 NS9530 ISO triangular turning insert for finishing – Tungaloy A TPGR160308 NS9530 ISO triangular turning insert designed for fine finishing operations in metal turning, delivering low cutting forces and superior surface quality. Cermet finishing grade NS9530 for Stahl Sharp cutting edge for high surface finish One-sided chipbreaker for controlled chips ISO triangular insert, 16 mm size, 11° clearance Consistent finishing quality with low cutting forces The insert is engineered as a Cermet finishing grade (NS9530) to reduce cutting forces while maintaining a sharp cutting edge that produces an improved surface texture on finishing passes. Cermet substrates combine hardness with heat resistance, which helps to keep the cutting edge stable during continuous cuts. The result is a predictable reduction in cutting load and a consistently better surface on components made from Stahl, making the insert particularly suitable for final passes where profile accuracy and finish are critical. Stable chip formation and process reliability A single-sided chipbreaker provides reliable chip control in a range of finishing conditions, assisting in uninterrupted material evacuation and lowering the risk of surface damage. The combination of chip geometry and the insert's edge preparation promotes stable cutting, which in turn supports higher process reproducibility and fewer interruptions on the shop floor. Compatibility with standard ISO holders ensures the clamping and seat geometry contribute to overall process stability rather than introducing variability. Easy integration into ISO turning tool systems The insert follows ISO geometry with a triangular form and a 16 mm inscribed circle; the 11° clearance angle and a nominal corner radius of 0.8 mm together determine the contact mechanics at the tool–workpiece interface. A plate thickness of 3.18 mm supports secure clamping and repeatable positioning on the cutter body. These standardised dimensions simplify tool selection and reduce setup time, enabling quick integration into existing toolsets while maintaining repeatable part tolerances across batches. Application focus and productivity benefits Designed primarily for external and internal turning in finishing operations, this grade excels in continuous cuts and small depths of cut where surface appearance and dimensional accuracy are priorities. The uncoated Cermet composition balances wear resistance with edge sharpness, offering longer effective cutting life in finishing scenarios and potentially lower total tooling cost per part. By improving surface finish and reducing rework, the insert supports more efficient production cycles and higher first-pass yield. Contact Metav Werkzeuge for precise application advice on the Tungaloy NS9530 finishing insert and to arrange procurement via info@metav-werkzeuge.com or telephone +49 2822 7131930 Technical Data Article number: 6998029 Manufacturer SKU: TUN6998029 SKU: 6998029-Tungaloy Model series: ISO-Drehwendeschneidplatten Material: Hartmetall Designation: TPGR160308 NS9530 Tungaloy-Wendeplatte Facts Inscribed circle / size: 16 mm Corner radius: 0.8 mm Plate thickness: 3.18 mm Clearance angle: 11° Included angle: 60° Special features Uncoated Cermet cutting material (NS9530) Finishing grade for Stahl Triangular plate form One-sided chipbreaker No hole (ohne Loch) ISO-compatible for external and internal turning FAQ What materials is this insert best suited for? The TPGR160308 NS9530 insert is a finishing grade optimised for machining Stahl, providing a sharp edge and low cutting forces for high-quality finishes. How does the chipbreaker affect machining? The one-sided chipbreaker on this turning insert improves chip control during continuous finishing cuts, which enhances process stability and surface integrity. Which toolholders are compatible with the insert? The insert follows ISO geometry and is compatible with standard ISO triangular holders designed for 16 mm inserts; proper seating and clamping depend on holder form, clearance and tolerance class. What are the key dimensional specifications to check before ordering? Verify the inscribed circle (16 mm), plate thickness (3.18 mm), corner radius (0.8 mm) and clearance angle (11°) to ensure compatibility with the chosen holder and application. Is this a coated grade and what are the benefits? This is an uncoated Cermet finishing grade (NS9530), which offers a very sharp edge for improved surface finish while maintaining wear resistance suited to finishing passes. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPGT 070100 SH7025 Wendeplatten - Tungaloy
Take advantage of the combination of SH7025 coated carbide for edge stability and ISO‑format compatibility to maintain consistent turning performance; order the insert directly via Metav Werkzeuge or ask our consultants if needed. TPGT 070100 SH7025 ISO turning insert for external and internal turning — Tungaloy The TPGT070100 SH7025 is an ISO‑format, triangular coated carbide turning insert designed for general external and internal turning, offering high edge stability for small tools and variable engagement conditions. ISO‑format triangular insert, 60° cutting angle SH7025 coated carbide grade for edge stability 11° clearance angle for controlled chip removal Cylindrical hole with single‑sided countersink Consistent cutting performance for variable turning tasks The combination of a coated carbide substrate and the SH7025 grade provides reliable edge stability under changing engagement conditions. This characteristic reduces unexpected edge chipping and supports predictable tool life when used in intermittent cuts or with smaller tool geometries. As a result, machinists benefit from more consistent surface quality and fewer insert changes, which contributes to smoother workflow and improved process reliability. Clear compatibility and secure clamping for predictable setups Manufactured to the ISO‑format, the insert’s fit is determined by form, clearance angle, tolerance class, fixing method, size and thickness. The 11° clearance and 1.59 mm thickness combine to give a stable seat in appropriately matched holders, while the triangular geometry with a 60° included angle offers three indexable corners for economical use. Selecting the correct holder, shim or clamping set ensures repeatable seating and accurate cutting geometry, simplifying setup and reducing alignment time. Controlled chip flow and practical system integration A single‑sided chipbreaker and a cylindrical hole with a countersink 40°–60° enable controlled chip formation and secure mechanical clamping, which together lower cutting forces and improve chip evacuation in many turning operations. Typical system components include the ISO turning insert, a compatible external holder or boring bar, a shim/clamping kit and spare screws. Choosing the appropriate chipbreaker style and the SH7025 grade for the workpiece material optimises productivity while maintaining surface quality. Contact Metav Werkzeuge for application matching and availability of the Tungaloy SH7025 coated carbide insert, and request advice on holder compatibility and clamping options Technical data Article number: 6967564 Manufacturer SKU: TUN6967564 SKU: 6967564-Tungaloy Model series: ISO turning insert series Designation: TPGT070100 SH7025 Material: Carbide Facts Cutting angle: 60° Clearance angle: 11° Plate thickness: 1.59 mm Plate size: 07 Plate shape: triangular Hole style: cylindrical hole + single‑sided countersink (40°–60°) Special features Coating/grade: SH7025 (tough, edge‑stable, coated carbide) Chipbreaker: single‑sided Typical application: external and internal turning System components: ISO insert, compatible holder or boring bar, shim/clamping kit, spare screws Compatibility determined by form, clearance, tolerance class, fixing, size and thickness FAQ Which holders are compatible with this insert? Compatibility depends on matching the holder’s seat form, tolerance class, fixing method, size and plate thickness; the TPGT070100 SH7025 insert fits ISO‑format holders designed for 07‑sized triangular inserts. What materials is this insert suited for? The SH7025 coated carbide grade is designed as a tough, edge‑stable solution for a broad range of turning tasks; the TPGT070100 SH7025 performs well where reliable edge life under variable engagement is required. Why does the insert have a cylindrical hole with a countersink? The cylindrical hole and single‑sided countersink (40°–60°) provide accurate seating and axial clamping, improving repeatability and secure fixation for the TPGT070100 SH7025 insert. How does the single‑sided chipbreaker influence performance? A single‑sided chipbreaker on the TPGT070100 SH7025 promotes controlled chip formation and evacuation during turning, which helps reduce cutting forces and supports consistent surface quality. What are the typical applications for this insert? Typical uses include external and internal turning operations, especially when small tools or changing engagement conditions require a grade with high edge stability like SH7025. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
TPGT 070100 SH725 Wendeplatten - Tungaloy
Take advantage of the SH725 coated-carbide grade and ISO compatibility for stable, repeatable cutting performance in turning operations; order the insert directly via Metav Werkzeuge or consult our specialists for application advice. TPGT 070100 SH725 Tungaloy turning insert — triangular ISO turning insert, 60° cutting angle The TPGT 070100 SH725 is an ISO‑standard, triangular, coated carbide insert designed for external and internal turning, offering a balanced combination of edge stability and adaptability for variable engagement conditions. Coated carbide grade SH725 for stable cutting Triangular insert, 60° cutting angle Single-sided chipbreaker for consistent chips Cylindrical hole, countersink 40°–60° Reliable cutting performance for varied turning tasks The design of this insert focuses on process reliability: the SH725 coating and carbide substrate provide a combination of toughness and edge stability suited to changing engagement and smaller tooling setups. The coated carbide construction increases resistance to abrasive wear while maintaining a durable cutting edge, which translates into fewer indexings and more consistent cycle times. For manufacturers seeking predictable throughput, the insert’s balance between toughness and wear resistance contributes directly to a more efficient production flow and reduced unplanned downtime. Easy integration with ISO holders and secure clamping Compatibility is determined by form, clearance, tolerance class, attachment method, size and thickness; the triangular geometry and standard dimensions make integration into common external holders and boring bars straightforward. The 11° clearance angle and standardised ISO designation mean the insert seats predictably in clamp pockets, reducing setup time and ensuring repeatable positioning. Explaining the technical term: ISO‑standard inserts conform to established shape and size codes so toolrooms can replace or rotate inserts without re‑qualifying the holder, improving maintainability and workshop throughput. Consistent chip control and improved surface outcomes Equipped with a single-sided chipbreaker, the insert promotes reliable chip formation across a range of feeds and depths of cut. Efficient chip control reduces the risk of entanglement and protects both the workpiece and tool, leading to improved surface finish and safer unattended machining. In short runs or mixed batches, predictable chip behaviour contributes to higher first‑pass quality and fewer rework cycles, which is especially relevant for shops aiming to maintain high yield and reduced inspection overhead. Practical specification and material guidance for turning applications The triangular 60° geometry with 1.59 mm plate thickness and size 07 offers a compact, rigid cutting edge suitable for light to moderate turning tasks. The insert’s cylindrical hole with one‑sided countersink (40°–60°) enables secure clamping and straightforward indexation. Use the insert for general turning of steels and non‑hardened materials where a tough, wear‑resistant cutting edge is required; selection of the chipbreaker and cutting parameters should be matched to the workpiece material and machine stability for optimum results. Choose the Tungaloy SH725 grade for demanding turning tasks — contact Metav Werkzeuge for availability and precise application advice at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6737300 Manufacturer SKU: TUN6737300 Label: TPGT070100 SH725 Tungaloy‑insert Model series: ISO turning indexable inserts Material: Carbide Facts ISO code: 070100 Insert designation: TPGT 070100 Size: 07 Thickness: 1.59 mm Clearance angle: 11° Included angle: 60° Special features Coating/grade: SH725 (coated carbide) Plate form: triangular Chipbreaker: single-sided Hole: cylindrical hole with one-sided countersink (40°–60°) Application: turning (external and internal) Compatibility: ISO‑standard insert dimensions and attachment FAQ What materials is this insert suited for? The TPGT 070100 SH725 insert is intended for turning applications where a tough, edge‑stable coated carbide grade is beneficial; it performs well on a wide range of steels and typical non‑hardened materials. How does the single‑sided chipbreaker affect performance? The single‑sided chipbreaker provides consistent chip formation for safer evacuation and improved surface finish when using the Tungaloy SH725 turning insert, particularly in variable engagement conditions. What does the ISO code 070100 indicate? The ISO code 070100 specifies the insert geometry and size family; it ensures the insert fits ISO‑compliant holders sized for 07, enabling predictable clamping and repeatable positioning. Can this insert be used for internal boring as well as external turning? Yes, the triangular 60° geometry and standard hole style allow the insert to be used in suitable boring bars and external holders for internal operations, provided the holder accepts the ISO 070100 format. What should be considered when selecting cutting parameters? Choose feed and depth of cut based on workpiece material, machine rigidity and toolholder stability; the SH725 grade favours conditions where edge toughness and wear resistance are required, and matching the chipbreaker to the material improves productivity. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPGT 070100 SH725 Wendeplatten - Tungaloy
Taking advantage of the SH725 coated carbide grade together with the ISO TPGT070100 triangular form delivers stable cutting-edge performance and reliable chip control under variable engagement conditions; the 11° clearance and 60° geometry ensure secure seating and precise cutting. Order the insert via Metav Werkzeuge or request consultant support for matching holders and clamping sets. TPGT070100 SH725 triangular turning insert (11° clearance) — Tungaloy The TPGT070100 SH725 is an ISO triangular indexable insert for external and internal turning, designed to provide stable cutting-edge behaviour in changing engagement conditions. ISO triangular 07 format Coated carbide SH725 grade 11° clearance angle Cylindrical hole with 40°–60° countersink Reliable performance for varying cutting conditions The coated SH725 grade combines toughness with edge stability for demanding turning operations. As a coated carbide insert with a one-sided chipbreaker, it is engineered to withstand interrupted cuts and variable chip loads, making it especially suitable for smaller tooling assemblies or operations where engagement changes frequently. The result is consistent material removal and reduced risk of edge chipping, supporting steady production quality. Secure seating and precise fitting for ISO systems Compatibility is determined by the insert's geometry, clearance and mounting details; the triangular 07 format and 60° included angle match standard ISO seats. The presence of a cylindrical hole with a single-sided countersink (40°–60°) secures the insert and improves repeatability when indexing. Tolerance class, fastening method, size and plate thickness are decisive for correct holder pairing and a stable clamping interface, which in turn reduces vibration and improves surface finish. Coating and material advantages that extend tool life The SH725 coating offers a balance of toughness and wear resistance suitable for a broad range of turning tasks. The coated substrate reduces flank wear while maintaining a robust cutting edge under fluctuating loads. For workshops seeking a cost-effective compromise between performance and tool life, this combination supports longer intervals between index changes and contributes to predictable productivity. Practical selection and integration in tool plans When integrating this insert into a tool system, select a holder and grade that match the intended workpiece material and cutting conditions; the single-sided chipbreaker should be chosen according to chip formation needs. Because the insert is ISO-standard, it fits many external holders and boring bars when the form, clearance, tolerance class, fastening, size and thickness align. Specifying these parameters at the planning stage reduces trial-and-error and accelerates process stabilisation. For technical selection or to place an order for Tungaloy SH725 turning inserts, contact Metav Werkzeuge for personalised advice and fast supply: info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: 6737299 Manufacturer SKU: TUN6737299 SKU: 6737299-Tungaloy Model series: ISO-Drehwendeschneidplatten Designation: TPGT070100 SH725 Core dimensions Thickness: 1.59 mm Included angle: 60° Clearance angle: 11° Size: 07 Countersink angle: 40°–60° Special features Shape: triangular Hole: cylindrical hole with one-sided countersink Coating/grade: SH725 coated carbide Chipbreaker: one-sided Application: turning (external and internal) Compatibility: ISO-standard insert; holder compatibility depends on form, clearance, tolerance class, fastening, size and thickness FAQ Which operations is this insert best suited for? The TPGT070100 SH725 Tungaloy turning insert is intended for external and internal turning where changing engagement or interrupted cuts occur; it is optimised for stable cutting-edge behaviour in such conditions. What does the SH725 grade provide compared with general-purpose grades? SH725 is a coated carbide grade that emphasises toughness and edge stability, helping to resist chipping during variable engagements while offering reliable wear performance. How is the insert secured in the holder? This triangular insert uses a cylindrical hole with a one-sided countersink (40°–60°) for fastening; correct seating and clamping rely on matching holder geometry, tolerance and fastening method. Can the insert be used in small-diameter tooling or boring bars? Yes, the SH725 grade and the insert's robust edge make it particularly suitable for smaller tooling assemblies or applications with fluctuating engagement, where edge stability is critical. What chip control can be expected from the one-sided chipbreaker? The one-sided chipbreaker on the insert promotes predictable chip formation for many turning tasks; chip shape and evacuation improve when the breaker and cutting data are matched to the workpiece material. Is the insert compliant with ISO standards for turning inserts? The insert follows ISO geometry conventions (TPGT 07 format and 60° included angle), enabling compatibility with ISO-standard holders when the related size and tolerance parameters are observed. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPGT 070100 SH730 Wendeplatten - Tungaloy
Take advantage of the combination of ISO compatibility, a tough SH730 coated carbide grade and a precise 60° triangular form for consistent turning performance; order directly via Metav Werkzeuge or consult our specialists for application advice. TPGT 070100 SH730 — ISO indexable turning insert for turning, Tungaloy TPGT070100 SH730 is an ISO‑standard triangular indexable insert engineered for versatile external and internal turning where a robust edge and secure clamping are required. ISO‑standard triangular insert SH730 coated carbide for edge stability 11° relief angle for reduced rubbing Cylindrical hole with 40°–60° countersink Consistent cutting performance for reliable throughput The combination of a coated carbide substrate and the SH730 grade provides a balance of toughness and edge stability that supports repeated, consistent performance in turning operations. The insert’s triangular 60° geometry delivers stable cutting lines for both facing and profile turning, while the single‑sided chipbreaker helps control chip flow in variable engagement conditions. For production environments that prioritise predictable tool life and fewer interruptions, this geometry and grade reduce the frequency of insert changes and support smoother machining cycles. Quick fitting and repeatable clamping reduce setup time Manufactured to ISO dimensions, the insert’s compatibility with toolholders is determined by its form, 11° relief angle, tolerance class, fastening method, size and thickness. The cylindrical hole with a one‑sided countersink (40°–60°) ensures secure seating and accurate repeatability when indexing or replacing inserts. Clear compliance with ISO standards simplifies tool provisioning across multiple machines and holders, meaning less time is spent checking fit and more on productive cutting. Suited to small tools and variable cut conditions The SH730 grade is described as a tough, edge‑stable coating combination developed for turning applications where tool engagement can change frequently or where smaller cutting edges are used. This makes the insert particularly effective when operations involve interrupted cuts or mixed finishing and roughing steps. The single‑sided chipbreaker is tailored to guide chips away from the cutting zone, which assists in maintaining surface quality and reduces the risk of chip entanglement. Practical benefits for workshop efficiency and tool management Using ISO interchangeable inserts such as this one supports a modular tooling strategy: the indexable design allows quick rotation to a fresh cutting edge, and standard dimensions permit straightforward stock management. The 1.59 mm plate thickness and compact 07 size are typical for light to medium turning tasks, offering an economical route to maintain productivity without sacrificing process stability. Keeping a consistent insert grade across similar operations simplifies feed and speed selection and helps new operators achieve repeatable results more quickly. Choose the Tungaloy SH730 insert to strengthen process reliability — contact Metav Werkzeuge for tailored recommendations or to confirm suitability for specific turning tasks via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6862147 Manufacturer SKU: TUN6862147 Model series: ISO indexable turning inserts Designation: TPGT070100 SH730 Facts Geometry angle: 60° Relief angle: 11° Plate thickness: 1.59 mm Size designation: 07 Hole: with hole Special features Triangular insert shape Cylindrical hole + one‑sided countersink (40°–60°) Single‑sided chipbreaker Coated carbide grade SH730 For turning applications ISO‑standardised design FAQ What type of machining is this insert designed for? This insert, the TPGT070100 SH730 indexable turning insert by Tungaloy, is designed for external and internal turning operations on ISO‑compatible holders. How does the SH730 grade influence tool life? The SH730 coated carbide grade in the TPGT070100 insert improves edge stability and toughness, which typically results in longer effective life under variable engagement conditions. Which holder features are important for compatibility? Compatibility depends on form, relief angle (11°), tolerance class, fastening method, size (07) and plate thickness (1.59 mm); ensure the toolholder matches these ISO parameters for correct fitting of the TPGT070100 SH730 insert. Can this insert control chip formation effectively? Yes, the single‑sided chipbreaker integrated into the TPGT070100 SH730 insert helps guide chips away from the cutting zone and supports stable chip formation in many turning tasks. What is the SKU for ordering or stock checks? The manufacturer SKU for this indexable insert is TUN6862147 and the article number is 6862147. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPGT 070100 SH730 Wendeplatten - Tungaloy
Take advantage of the SH730 grade and the ISO triangular geometry for a combination of durable cutting performance and reliable seating; the 60° included angle and 11° relief ensure compatibility with standard holders and stable clamping for consistent turning results. Order or request advice via Metav Werkzeuge for prompt availability and technical guidance. TPGT 070100 SH730 Tungaloy indexable insert for turning, 60° A TPGT070100 SH730 ISO-indexed triangular insert designed for general turning operations, offering a durable coated cemented carbide grade for variable cutting conditions Triangular ISO insert, 60° included angle SH730 coated cemented carbide grade 11° relief angle for secure seating Cylindrical hole with 40°–60° countersink Productive cutting through a resilient grade and compact geometry The combination of the SH730 coating and coated cemented carbide substrate provides a resilient cutting edge that maintains form under varying engagement conditions. This makes the insert particularly suitable for shorter or lighter toolholders and for jobs where cutting depth or chip load can change frequently. The ISO-compliant geometry ensures repeatable positioning when seating the insert in an appropriate holder, while the 60° included angle contributes to effective material removal and accessibility in confined turning tasks. The result is improved process stability and fewer unplanned indexings, which supports a smoother production flow. Secure seating and clamping for repeatable accuracy An 11° relief angle and the central hole design — a cylindrical bore with a one-sided countersink at 40°–60° — provide reliable clamping and repeatable seating in standard clamping systems. The single-sided chipbreaker aids chip control on the active cutting side, reducing the risk of chip interference and improving surface consistency. Where repeatability and secure fixation are priorities, the insert's thin 1.59 mm body and ISO form deliver predictable mechanical behaviour under clamping forces, minimising micro-movement and contributing to consistent dimensional results across batches. Practical system considerations and application recommendations Designed for external and internal turning, the insert is part of a system that comprises the ISO indexable plate, a matching external holder or boring bar, a shim/clamp set and replacement fixing screws. Select the chipbreaker and grade to suit the workpiece material and the expected stability of the setup; the SH730 grade performs well where toughness and cutting-edge stability are required, especially on smaller tool assemblies. Compatibility with a given holder is determined by form, relief angle, tolerance class, fastening method, size and thickness, so ensure these parameters are matched to achieve optimal cutting performance and tool life. For technical advice or to purchase the Tungaloy TPGT070100 SH730 insert, contact Metav Werkzeuge — email info@metav-werkzeuge.com or call +49 2822 7131930 for immediate assistance and availability Technical data Manufacturer article number: 6862146 SKU: 6862146-Tungaloy Manufacturer SKU: TUN6862146 Model series: ISO indexable turning inserts Label: TPGT070100 SH730 Tungaloy-Wendeplatte Facts Insert designation: TPGT070100 ISO code: 070100 Insert size: 07 Thickness: 1.59 mm Included angle: 60° Relief angle: 11° Hole: with hole Special features Shape: triangular Grade: SH730 (coated cemented carbide) Chipbreaker: single-sided Hole style: cylindrical hole + one-sided countersink (40°–60°) Application: turning System components: compatible holders, shim/clamp set and replacement screws FAQ What turning tasks is this insert suited for? The TPGT070100 SH730 Tungaloy indexable insert is intended for external and internal turning where a triangular ISO insert and a SH730 grade are advantageous. How does the SH730 grade benefit everyday machining? The SH730 coating and cemented carbide combination on the TPGT070100 provides toughness and edge stability, helping to extend cutting life and maintain surface quality under variable engagement. Which holder characteristics must be checked for compatibility? Compatibility is governed by form, relief angle (11°), tolerance class, fastening method, insert size (07) and thickness (1.59 mm); ensure the chosen external holder or boring bar matches those parameters for the TPGT070100. What chip control can be expected from this insert? With a single-sided chipbreaker, the insert supports controlled chip formation on the active cutting side, aiding evacuation and improving surface consistency during turning operations. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPGT 070100 TH10 Wendeplatten - Tungaloy
Take advantage of a sharp, uncoated carbide grade and precise ISO geometry to reduce cutting forces and improve surface finish; the triangular 60° form and 1.59 mm thickness ensure secure clamping and reliable interchangeability. Order the insert directly via Metav Werkzeuge or consult the team for holder compatibility and stock. TPGT 070100 TH10 – ISO triangular turning insert (60°, uncoated) by Tungaloy A TPGT070100 TH10 indexable insert designed for ISO‑standard turning, suitable for external and internal operations where low cutting forces and clean surfaces are required ISO triangular insert, 60° geometry Sharp TH10 grade for non‑ferrous materials Cylindrical hole with countersink 40°–60° Thickness 1.59 mm for precise clamping Consistent cutting with a sharp, uncoated carbide edge The triangular insert is manufactured from uncoated carbide, a choice that provides a very sharp cutting edge for reduced cutting resistance and better surface finish when machining non‑ferrous metals. The 60° geometry delivers stable engagement during both light and moderate cuts, while the 11° clearance angle minimises rubbing and heat build‑up. Together these attributes enable smoother chip flow and lower power draw compared with blunter grades, supporting efficient cycle times and predictable tool life. Smooth interchange and secure clamping for quick tool changes Designed to the ISO form, the insert fits holders when shape, clearance, tolerance class, fastening and thickness match. The cylindrical hole with a one‑sided countersink (40°–60°) ensures repeatable seating and a secure clamp interface, reducing set‑up time and runout risk. With a plate thickness of 1.59 mm and size 07, the component is compatible with many common external holders and boring bars, simplifying inventory and enabling fast re‑indexing during production. Versatile for external and internal turning of non‑ferrous materials The TH10 grade is a sharp universal sort intended primarily for non‑ferrous materials and applications that benefit from low cutting forces and clean finishing. Typical tasks include external profiling, light roughing and internal turning where a crisp edge yields minimal burr and fine surface quality. Selecting the single‑sided chipbreaker appropriate to the workpiece stability and machining type helps maintain consistent chip control and reduces the likelihood of built‑up edge. Operational benefits that support productivity and economy Using a purpose‑matched insert like this reduces machine idle time through straightforward replacement and predictable performance. The combination of a sharp, uncoated grade and ISO geometry promotes lower cutting forces, which can extend spindle and holder life while improving net part quality. For production environments seeking cost‑effective tooling without sacrificing finish, the insert offers a practical balance of performance and economy and aligns with process stability objectives. For compatibility checks, availability or to order genuine Tungaloy turning inserts, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930; the Metav Werkzeuge team can advise on holder matching and stock status. Technical data Article number: 6862186 Manufacturer SKU: TUN6862186 SKU: 6862186-Tungaloy Model series: ISO turning indexable inserts Material: Carbide (uncoated) Facts Size: 07 Geometry angle: 60° Clearance angle: 11° Thickness: 1.59 mm Countersink angle: 40°–60° Special features Grade: TH10 (sharp universal grade) Chipbreaker: single‑sided Shape: triangular Hole style: cylindrical hole + one‑side countersink Application: Turning FAQ What materials is this insert best suited to? The TH10 grade insert is optimised for non‑ferrous materials and operations where a sharp, uncoated cutting edge yields low cutting forces and clean surfaces; it is commonly used for aluminium, brass and similar alloys. How does the insert secure to the holder? The triangular insert seats on the holder via a cylindrical hole with a one‑sided countersink (40°–60°) and relies on the 1.59 mm thickness and ISO form for repeatable clamping and minimal runout. Can this insert be used for internal turning? Yes, the ISO‑standard triangular geometry and single‑sided chipbreaker make the insert suitable for both external and internal turning tasks, provided the holder offers correct clearance and rigidity. What advantage does the uncoated carbide provide? An uncoated carbide edge offers a very sharp cutting face that reduces cutting forces and improves surface finish in non‑ferrous machining; the TH10 grade balances edge sharpness with reasonable wear resistance for general turning. Is the insert compatible with common ISO holders? Compatibility depends on matching form, clearance angle, tolerance class, fastening method, size and thickness; the insert follows ISO designation conventions to simplify matching with standard holders. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
TPGT 070100 TH10 Wendeplatten - Tungaloy
Take advantage of a sharp, uncoated carbide grade and ISO‑standard geometry to achieve low cutting forces and clean surface finishes in non‑ferrous turning; order directly via Metav Werkzeuge or contact our consultants for tailored advice. TPGT 070100 TH10 Tungaloy turning insert — 60° triangle, 11° clearance TPGT 070100 TH10 is an ISO‑standard triangular turning insert designed for external and internal turning of non‑ferrous materials, delivering low cutting forces and improved surface quality. ISO‑standard triangle insert, size 07 Sharp TH10 grade for non‑ferrous materials 60° included angle, 11° clearance Cylindrical hole with 40°–60° countersink Precise, low‑force cutting for non‑ferrous materials The TH10 grade is an uncoated carbide formulation optimised for applications where a sharp cutting edge and low cutting forces are required. This makes the insert particularly effective on aluminium, brass and other non‑ferrous alloys, as well as plastics where heat‑sensitive surfaces must be preserved. The combination of a fine, sharp edge and the single‑sided chipbreaker results in reduced burr formation and improved part finish. For practical terms: lower cutting forces often mean less tool vibration and more stable turning cycles, which benefits both throughput and repeatability. Secure fit and versatile clamping for reliable production The insert follows ISO geometries which dictate compatibility through shape, clearance angle, tolerance class, fastening style, size and thickness. The triangular shape with a 60° included angle and 11° clearance ensures predictable engagement in standard external holders and boring bars. The central cylindrical hole with a single‑side countersink (40°–60°) provides secure clamping and straightforward indexability. A complete system typically comprises the insert, a suitable external holder or boring bar, a backing shim or clamp set, and replacement screws — all chosen to match the insert form and tolerance for optimal performance. Better chip control and surface quality with the right geometry A single‑sided chipbreaker tailored to the TH10 grade improves chip formation during moderate to stable turning operations, aiding evacuation and reducing rework. In practice, selecting the correct chipbreaker and grade for the workpiece material and machine rigidity translates into higher productivity and fewer interruptions. The insert’s 1.59 mm thickness and size 07 balance edge strength and accessibility for tight radii or stepped parts, supporting both external and internal turning tasks. When machining undercut features or light finishing cuts, the combination of a sharp edge and controlled chip formation helps achieve consistent dimensional accuracy and a superior aesthetic surface. For application support and recommendations on holder selection or cutting parameters, contact Metav Werkzeuge — our consultants will advise on the optimum combination of insert grade, chipbreaker and clamping for efficient turning operations. Technical data Article number: 6862185 SKU: 6862185-Tungaloy Manufacturer SKU: TUN6862185 Brand: Tungaloy Model series: ISO‑Drehwendeschneidplatten Core data ISO designation: 070100 Insert size: 07 Thickness: 1.59 mm Included angle: 60° Clearance angle: 11° Hole style: with hole (cylindrical + single‑side countersink) Special features Material: carbide Grade: TH10 (sharp universal grade for non‑ferrous materials) Uncoated cutting edge Single‑sided chipbreaker Triangular plate shape Application: external and internal turning System components: insert, holder/boring bar, backing shim/clamp, replacement screws Countersink angle: 40°–60° FAQ What materials is this insert best suited for? The TPGT 070100 TH10 insert is optimised for non‑ferrous materials such as aluminium, brass and plastics, where a sharp, uncoated carbide edge gives low cutting forces and clean surfaces. Can the insert be used for both external and internal turning? Yes, the triangular ISO insert is suitable for external and internal turning when paired with the correct external holder or boring bar and appropriate clamping components. How does the central hole affect clamping? The cylindrical hole with a single‑side countersink (40°–60°) on the TPGT 070100 TH10 insert provides secure fastening and reliable repeatability when using compatible ISO‑standard clamping systems. What is the benefit of the single‑sided chipbreaker? The single‑sided chipbreaker supports controlled chip formation for the TH10 grade, improving evacuation and surface finish during standard turning operations. Is this insert coated or uncoated and why does that matter? This indexable insert has an uncoated carbide cutting edge; the uncoated edge offers a sharper geometry that reduces cutting forces and is advantageous on softer, ductile non‑ferrous materials. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPGT 070101 SH7025 Wendeplatten - Tungaloy
Take advantage of the combination of robust edge stability, ISO compatibility and a compact 0.1 mm corner radius for precise finishing and predictable tool life; order the insert via Metav Werkzeuge or consult our specialists for application advice and availability. TPGT 070101 SH7025 ISO turning insert for turning – Tungaloy TPGT 070101 SH7025 is an ISO-indexed triangular turning insert designed for external and internal turning operations in standard ISO holder systems Triangular ISO 07 size, 60° included angle Coated carbide grade SH7025 for tough conditions 0.1 mm corner radius for fine finishing Cylindrical hole with single-sided countersink Consistent edge stability for reliable production The coated carbide composition and the SH7025 grade deliver edge stability that supports continuous machining with reduced edge chipping. The grade is engineered for toughness and wear resistance, which means the insert maintains cutting geometry under varying entry conditions. In practice, this reduces process interruptions and contributes to a steadier surface finish. The term edge stability refers to the insert's ability to retain a consistent cutting edge under fluctuating forces, which is critical for repeatable cycle-to-cycle accuracy in turning operations. Geometry tailored for precision and surface quality The triangular design with a 60° included angle and a 0.1 mm corner radius provides controlled cutting engagement and predictable chatter behaviour. A smaller corner radius improves surface finish while still permitting modest depth of cut; the 11° relief angle helps to avoid rubbing and supports efficient chip formation. For users unfamiliar with these parameters: the included angle determines cutting forces and insert strength, the corner radius affects finish and edge strength, and the relief angle controls clearance behind the cutting edge to prevent overheating. Secure clamping and compact construction for tight setups The insert's cylindrical hole with a single-sided countersink (40°–60°) ensures secure axial location and repeatable seating in compatible ISO clamping systems. With a thickness of 1.59 mm and ISO 07 size, the design is compact and suited to smaller toolholders or reduced overhang assemblies where rigidity is at a premium. Compatibility is governed by form, relief angle, tolerance class, fastening and thickness; using the correct seat and screw ensures consistent clamping force and repeatable tool positioning. Application guidance and selection for process reliability The one-sided chipbreaker geometry is intended for general turning; selection of a matching chipbreaker and the SH7025 sort should be based on workpiece material, machining mode and machine stability. For example, the SH7025 sort is specified for tougher conditions and changing engagement, offering a balance between wear resistance and fracture toughness. Choosing an appropriate chipbreaker improves chip control and surface integrity while extending the effective tool life, which in turn supports predictable production costs and uptime. For application-specific recommendations or to check availability of the Tungaloy TPGT 070101 SH7025 insert, contact Metav Werkzeuge for technical advice and prompt supply at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Manufacturer article number: 6967557 SKU: 6967557-Tungaloy Manufacturer SKU: TUN6967557 Model series: ISO turning indexable inserts Brand: Tungaloy Facts Size: ISO 07 Thickness: 1.59 mm Included angle: 60° Relief angle: 11° Corner radius: 0.1 mm Hole type: cylindrical hole + one-sided countersink (40°–60°) Special features Coated carbide grade SH7025 Triangular insert shape Single-sided chipbreaker Cylindrical hole with countersink for secure clamping Application: external and internal turning FAQ What holder compatibility is required for this insert? Compatibility is defined by form, relief angle, tolerance class, fastening, size and thickness; the TPGT 070101 SH7025 insert fits holders designed for ISO 07 triangular inserts with matching seat and clamping system. For which machining conditions is the SH7025 grade intended? The SH7025 grade is a coated carbide sort optimised for tougher cutting conditions and variable engagement, offering a balance of wear resistance and edge stability for turning applications. How does the 0.1 mm corner radius affect surface finish and strength? A 0.1 mm corner radius produces finer surface finishes and reduces built-up edge risk on light to moderate cuts; however, it is less robust than larger radii for heavy interrupted cuts, so selection should match cutting parameters. What is the purpose of the countersunk hole design? The cylindrical hole with single-sided countersink ensures precise axial location and repeatable clamping torque, which supports consistent insert seating and minimises movement under load. Can this insert be used for internal and external turning? Yes, the geometry and chipbreaker type make the insert suitable for both external and internal turning tasks when combined with the appropriate holder and cutting parameters. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPGT 070101 SH7025 Wendeplatten - Tungaloy
High wear resistance and stable chip control result in predictable machining and fewer tool changes; the triangular geometry with a 0.1 mm corner radius supports accurate profiling and fine finishing. Benefit from the SH7025 grade’s edge stability in changing engagement conditions and order the TPGT070101 insert directly via Metav Werkzeuge or consult the specialists if application advice is needed. TPGT 070101 SH7025 — Tungaloy turning insert (ISO triangular 07, 60°) TPGT 070101 SH7025 is an ISO-standard triangular turning insert designed for reliable external and internal turning where consistent edge life and secure seating are essential Coated cemented carbide grade SH7025 Triangular ISO insert, size 07 Secure clamping with hole and countersink 0.1 mm corner radius for fine profiling High-edge stability for consistent turning results The SH7025 grade is a coated cemented carbide developed for toughness and stable cutting edges, especially useful when tool size is small or cutting conditions vary. This hardness-toughness balance reduces unexpected edge chipping and extends usable life, which translates into fewer interruptions and lower tooling consumption. Where surface finish and repeatable dimensional accuracy matter, the combination of a durable grade and a precise corner radius 0.1 mm offers improved part-to-part consistency without sacrificing productivity. The coating enhances wear resistance, helping maintain cutting geometry over longer cycles. Secure mounting and geometry that improves repeatability The triangular shape (ISO size 07) and 60° included angle deliver predictable engagement and straightforward indexing for four usable corners. The insert’s seating features — with hole and a cylindrical hole plus one-sided countersink (40°–60°) — ensure positive location and consistent clamp pressure, which reduces vibration and helps maintain surface quality. Compatibility with toolholders depends on form, 11° relief angle, tolerance class, fastening method, size and thickness; matching these parameters guarantees correct seat contact and repeatable positioning for series production. Clear understanding of relief angle and seat form is crucial to avoid clearance issues and ensure stable cutting. Practical benefits: efficiency, flexibility and easier process tuning A 1.59 mm plate thickness and the small corner radius make this insert suitable for fine profiling and finishing passes where control over scallop height and edge integrity is needed. The single-sided chipbreaker allows selection of a cutting edge tailored to the machining task; selecting the correct breaker and grade for the workpiece material and machine stability optimises chip formation and reduces downtime. As an ISO indexable insert, it simplifies inventory management and allows quick indexing on multi-operation lines, supporting higher machine uptime and predictable production flow. Contact Metav Werkzeuge for application advice and to secure Tungaloy turning inserts; email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss the right insert geometry and ordering options Technical data Article number: 6967565 Manufacturer SKU: TUN6967565 SKU: 6967565-Tungaloy ISO designation: TPGT070101 Model series: ISO indexable turning inserts Material: cemented carbide Key dimensions Corner radius: 0.1 mm Thickness: 1.59 mm Size: 07 Relief angle: 11° Included angle: 60° Design & features Triangular insert, size 07 With hole Cylindrical hole + one-sided countersink (40°–60°) Single-sided chipbreaker Grade SH7025 Coated cemented carbide Intended application: Turning Compatibility: form, relief angle, tolerance class, fastening, size, thickness FAQ What turning operations is this insert suited for? The TPGT070101 insert is designed for both external and internal turning operations where a triangular indexable insert provides efficient corner use and repeatable seating. How does the SH7025 grade benefit machining? SH7025 offers a coated cemented carbide composition that balances toughness and edge stability, improving wear resistance and extending edge life under varying engagement conditions. What does the 0.1 mm corner radius mean for finish and profiling? A 0.1 mm corner radius results in finer profiling and improved surface finish on finishing passes, reducing scallop heights and aiding dimensional accuracy during light cuts. How important is the insert hole and countersink for clamping? The presence of a hole with a cylindrical bore and one-sided countersink (40°–60°) ensures secure seating and consistent clamp pressure, which increases repeatability and reduces vibration during cutting. Which identifiers should be referenced when ordering or specifying replacements? Reference the ISO designation TPGT070101, grade SH7025, and SKU 6967565-Tungaloy together with the model series to ensure the correct Tungaloy turning insert is supplied. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPGT 070101 SH725 Wendeplatten - Tungaloy
Benefit from the combination of a SH725-coated carbide grade and a precise 0.1 mm corner radius for stable cutting and consistent edge life; the ISO compatibility ensures straightforward integration into standard turning tool systems. Order the insert directly via Metav Werkzeuge or consult our advisors for application-specific recommendations. TPGT 070101 SH725 Tungaloy turning insert — triangular 07 for turning A TPGT 070101 SH725 Tungaloy turning insert designed for ISO-standard turning applications, offering a robust, edge-stable grade suited to small tools and variable engagement conditions. ISO triangular insert 07 size SH725 coated carbide grade 60° cutting geometry 0.1 mm corner radius Cylindrical hole with single-sided countersink High-performance cutting where stability matters The SH725 formulation provides a coated carbide structure engineered for stable cutting-edge behaviour, particularly under changing engagement conditions and on smaller toolholders. This results in fewer unexpected tool changes and a more predictable production rhythm. The triangular 60° geometry delivers versatile approach angles for external and internal turning, enabling productive material removal while preserving surface finish. By combining a tough substrate with a wear-resistant coating, the insert supports extended service intervals and reliable repeatability in series production. Seamless integration with ISO tooling systems Designed to ISO norms, the insert fits standard toolholders when matched by form, relief angle, tolerance class, clamping method, size and thickness. The clearances and tolerances minimise setup time and reduce the risk of incorrect assembly, so integration into an existing toolset is straightforward. The 11° relief angle and 1.59 mm thickness harmonise with many holders, cutting down machine downtime associated with trial-and-error tool changes. This compatibility translates into smoother process planning and fewer interruptions on the shop floor. Controlled chip formation for consistent machining The one-sided chipbreaker geometry supports orderly chip control under a wide range of cutting parameters, helping to avoid tangles and re-cutting. For parts with variable engagement or intermittent cuts the stable chip flow assists in maintaining surface quality and reducing secondary operations. Selecting the appropriate chip control together with the SH725 grade means the insert can be tuned to emphasise either tool life or productivity, depending on whether the priority is long runs or short, high-rate batches. Economic advantages through predictability and robustness A combination of a tough substrate and optimised coating reduces flank and crater wear, delivering a predictable tool life and lower scrap rates. The modest 0.1 mm corner radius is a practical compromise between strength and a fine surface finish, suitable for many turning tasks without excessive machine adjustments. Over repeated cycles, the consistent performance contributes to lower overall machining costs and more reliable scheduling — advantages that matter in production-focused environments. For specific stock information, grade suitability or application advice on Tungaloy turning inserts, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for a tailored consultation and rapid availability check. Technical data Article number: 6737302 SKU: 6737302-Tungaloy Manufacturer SKU: TUN6737302 Model series: ISO turning inserts Core specifications Grade: SH725 Material: carbide Insert form: triangular Size: 07 Included angle: 60° Corner radius: 0.1 mm Relief angle: 11° Thickness: 1.59 mm Special features Coating: SH725 coated Hole: with hole (cylindrical + single-sided countersink 40°–60°) Chipbreaker: one-sided Application: turning Compatibility: ISO holders (form, relief angle, tolerance class, clamping, size, thickness) FAQ Which toolholders are compatible with this insert? The TPGT 070101 SH725 Tungaloy turning insert is made to ISO dimensions; compatibility depends on matching the holder by form, relief angle, tolerance class, clamping and thickness. Is this grade suitable for interrupted cuts or variable engagement? Yes, the SH725-coated carbide grade was developed for stable cutting-edge behaviour under changing engagement conditions, making it appropriate for interrupted cuts and variable depths of cut. What does the 0.1 mm corner radius mean for surface finish and tool life? A 0.1 mm corner radius offers a balance between edge strength and surface quality, helping to achieve fine finishes while retaining resistance to edge chipping in many turning operations. How does the hole and countersink affect mounting? The insert’s cylindrical hole with a single-sided countersink (40°–60°) ensures secure clamping and consistent seating in compatible ISO holders, simplifying repeatable mounting. Can the chipbreaker be changed for different materials? Chip control is application-specific; the one-sided chipbreaker on this insert supports orderly chip formation across diverse turning tasks, and can be paired with appropriate cutting parameters to suit different machining demands. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPGT 070101 SH725 Wendeplatten - Tungaloy
Take advantage of the combination of robust SH725 coating performance, a compact 0.1 mm corner radius and ISO conformity for reliable turning operations; order directly via Metav Werkzeuge or consult our specialists for application-specific recommendations. TPGT 070101 SH725 Tungaloy turning insert — triangular ISO insert with 60° included angle The TPGT070101 SH725 is an ISO triangular indexable insert designed for external and internal turning, offering a tough, edge-stable coated cemented carbide grade for variable engagement conditions and smaller tooling systems. ISO triangular 60° insert SH725 coated cemented carbide grade 0.1 mm corner radius for fine detail Cylindrical hole with 40°–60° countersink Consistent cutting performance with a tough, coated grade The insert combines a coated cemented carbide substrate with the SH725 grade to deliver stable cutting edges and extended life in changing engagement conditions. This composition favours effective chip control when used with a single-sided chipbreaker, reducing interruption and ensuring steady material removal rates. The result is predictable performance across short-run and batch production, lowering process variability and supporting higher machine utilisation. Precision geometry that supports accurate turning results Engineered as an ISO triangular insert with a 60° included angle and a 0.1 mm corner radius, the geometry facilitates accurate profile work and detail turning while maintaining edge strength. The 11° relief angle and a plate thickness of 1.59 mm contribute to secure clamping and minimal vibration when the insert is mounted in a compatible holder. This geometry translates directly into consistent surface finish and repeatable tolerances in external and internal turning operations. Compatibility and system considerations for reliable mounting Compatibility is determined by form, relief angle, tolerance class, fixing method, size and thickness; the system comprises the ISO insert, a matching external holder or boring bar, backing/clamping set and replacement screws. The insert’s cylindrical hole with single-sided countersink (40°–60°) ensures secure fastening and alignment in standard toolholders. Selecting the correct chipbreaker and grade permits optimisation for specific materials and machining stability. Practical benefits for workshops and production For workshops seeking economical productivity, the insert’s compact dimensions and SH725 toughness reduce frequent tool changes and support productive turning cycles, especially on smaller tooling assemblies. The ISO designation and standard form enable straightforward replacement in common holder systems, facilitating fast tool changeovers and consistent process control. The combination of geometry and grade helps to extend cutting intervals and maintain surface quality. Contact Metav Werkzeuge for tailored advice and to secure Tungaloy TPGT070101 SH725 inserts for dependable turning performance Technical data Article number: 6737301 Manufacturer SKU: TUN6737301 SKU: 6737301-Tungaloy Model series: ISO-Drehwendeschneidplatten Material: cemented carbide Brand: Tungaloy Numbers / Core technical data Corner radius: 0.1 mm Included angle: 60° Relief angle: 11° Thickness: 1.59 mm Size code: 07 Designs / Special features ISO designation: TPGT070101 Grade: SH725 Plate form: triangular Mounting: with hole Hole style: cylindrical hole + one-sided countersink (40°–60°) Chipbreaker: single-sided Typical application: turning System components: insert, matching holder or boring bar, backing/clamp set, replacement screws FAQ What materials is this insert suitable for? The SH725-grade TPGT070101 insert is a tough, edge-stable solution suitable for a broad range of materials in turning; grade selection and chipbreaker should be matched to the specific workpiece material. How is compatibility with a toolholder ensured? Compatibility depends on holder form, relief angle, tolerance class, fixing method, size and thickness; the ISO designation and hole/countersink geometry of the TPGT070101 support mounting in standard ISO holders. What advantages does the 0.1 mm corner radius offer? A 0.1 mm corner radius gives improved detail control and edge strength for fine profiles, helping to maintain surface finish while limiting stress on the cutting edge during light to moderate engagements. Is this insert intended for internal as well as external turning? Yes; the triangular ISO geometry and robust SH725 grade make the insert suitable for both external and internal turning when used with appropriate holders and stable setups. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPGT 070101 SH725 Wendeplatten - Tungaloy
TPGT 070101 SH725 Tungaloy-Wendeplatte für Drehen Die TPGT070101 SH725 Tungaloy-Wendeplatte ist eine ISO-genormte Drehwendeschneidplatte für Außen- und Innendrehen mit beschichtetem Hartmetall für wechselnde Eingriffsbedingungen. ISO-genormte Dreieckplatte 07 Beschichtetes Hartmetall SH725 für zähe Schnitte Eckenradius 0,1 mm für feine Konturen Plattendicke 1,59 mm, Frei winkel 11° Mit zylindrischem Loch und einseitiger Senkung Präzision und Prozesssicherheit für das Drehen Die TPGT070101 SH725 Tungaloy-Wendeplatte bietet konstante Schnittqualität durch die Kombination aus beschichtetem Hartmetall und einer speziell für wechselnde Einsätze entwickelten Sorte. Durch den Eckenradius 0,1 mm lassen sich feine Konturen und Nacharbeit minimieren, was Rüstzeiten reduziert und Ausschuss verringert. Die ISO-Genorm sorgt für einfache Austauschbarkeit und Kompatibilität zu gängigen Haltersystemen, sodass die Produktionsabläufe stabil bleiben. Materialanpassung und Werkstoffvielfalt Die SH725-Sorte ist ausgelegt für zähe, schneidkantenstabile Anwendungen und eignet sich insbesondere bei kleinen Werkzeugen oder variierenden Eingriffsbedingungen. Beschichtetes Hartmetall sorgt für verbesserte Verschleißfestigkeit und ermöglicht zuverlässige Bearbeitung von Stahl und legierten Werkstoffen. Die Auswahl des passenden Spanbrechers und die Abstimmung auf die Maschinenstabilität erhöhen die Standzeit und verbessern die Oberflächengüte der Werkstücke. Konstruktion und Befestigungsmerkmale Die dreieckige Plattenform in Größe 07 mit mit Loch und zylindrischer Bohrung plus einseitiger Senkung (40°–60°) gewährleistet sichere Fixierung am Halter und reproduzierbare Sitzlage. Mit einer Plattendicke von 1,59 mm und einem Frei winkel von 11° ist die Platte für vielfältige Außen- und Innendrehaufgaben ausgelegt. Die systematische Konstruktion erleichtert den Wechsel der Wendeschneidplatte und minimiert die Ausfallzeiten in der Fertigung. Wirtschaftlichkeit und Anwendernutzen Durch die Kombination aus standfester Schneidsorte und ISO-Standardisierung wird die Beschaffung und Lagerhaltung vereinfacht, während gleichzeitig die Produktivität steigt. Weniger Werkzeugwechsel und längere Standzeiten bedeuten geringere Personalkosten und eine bessere Planbarkeit von Fertigungsabläufen. Technische Anwender profitieren von der praxisnahen Sortenauslegung, die auf möglichst breite Werkstoffabdeckung und stabile Spanbildung abzielt. Für Beratung zur optimalen Bestückung und Verfügbarkeit die Tungaloy-Wendeplatte bei Metav Werkzeuge anfragen: info@metav-werkzeuge.com / +49 2822 7131930 Technische Daten Artikelnummer: 6737294 Marke: Tungaloy Serie: ISO-Drehwendeschneidplatten Hersteller SKU: TUN6737294 Fakten Plattendicke: 1,59 mm Eckenradius: 0,1 mm Frei winkel: 11° Winkel: 60° Plattengröße: 07 Besonderheiten Dreieckig Mit Loch: zylindrisches Loch + einseitige Senkung (40°–60°) Einseitiger Spanbrecher Beschichtet: SH725 (zähe, schneidkantenstabile Sorte) Material: Hartmetall Einsatz: Drehen ISO-genormt (Kompatibilität über Form, Freiwinkel, Toleranzklasse, Befestigung, Größe, Dicke) FAQ Für welche Bearbeitungsaufgaben ist die Platte geeignet? Die TPGT070101 SH725 Tungaloy-Wendeplatte eignet sich primär für Außen- und Innendrehen; durch die zähe SH725-Sorte lassen sich auch variierende Eingriffsbedingungen zuverlässig bewältigen. Welche Vorteile bietet die Beschichtung SH725? SH725 liefert verbesserte Verschleißfestigkeit und stabile Schneidkante, was bei der TPGT070101 zu längeren Standzeiten und konstanteren Oberflächen führt. Wie beeinflusst der Eckenradius die Bearbeitung? Der Eckenradius 0,1 mm ermöglicht präzise Konturen und reduziert Nacharbeit; er ist ideal für feine Schnitte und detailgenaue Werkstückgeometrien. Ist die Platte mit Standardhaltern kompatibel? Ja, die ISO-Genorm der TPGT070101 definiert Form, Frei winkel und Maße, sodass die Kompatibilität mit gängigen Außenhaltern und Bohrstangen gegeben ist. Welche Befestigungsart hat die Platte? Die Platte verfügt über ein zylindrisches Loch mit einseitiger Senkung (40°–60°), was eine sichere und zentrierte Fixierung im Halter gewährleistet. Hersteller: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Geschützte Markenzeichen und Warenbezeichnungen liegen im Recht ihrer jeweiligen Eigentümer. Markennamen und geschützte Warenzeichen werden ausschließlich zu Erklärungszwecken genannt. Es besteht keinerlei Verbindung zwischen unserem Unternehmen und den genannten Marken. Es handelt sich bei dem angebotenen Artikel um originale fabrikneue Waren des Herstellers.
TPGT 070101 SH730 Wendeplatten - Tungaloy
Take advantage of the combination of high process reliability, a SH730 coated carbide grade and a precise 0.1 mm nose radius for consistent machining results; order the insert directly via Metav Werkzeuge or consult our specialists for application advice. TPGT 070101 SH730 Tungaloy turning insert — triangular ISO turning insert, 11° relief A TPGT 070101 SH730 triangular turning insert designed for general turning operations, delivering stable cutting-edge performance in varied engagement conditions. TPGT triangular insert ISO 070101 SH730 coated carbide for stable cutting 11° relief angle for versatile turning Cylindrical hole with 40°–60° countersink Precision and productivity from a coated carbide grade The SH730 coating combined with a robust carbide substrate provides a balance of toughness and wear resistance that supports stable cutting-edge life under mixed cutting conditions. As an ISO-compliant triangular insert, the design facilitates quick index changes and predictable toolpath results. The coating improves heat resistance and reduces flank wear, which translates into longer intervals between index changes and fewer machine stops — a direct contribution to improved process efficiency and lower unit costs. Reliable chip control and surface results through geometry The insert’s single-sided chipbreaker and 0.1 mm nose radius are optimised for small to medium-depth turning cuts, improving chip formation and evacuation. The modest nose radius supports consistent surface finish without demanding excessive cutting forces, while the 11° relief angle ensures clearance and reduces rubbing on the flank. Together these geometric features reduce vibration and promote repeatable dimensional accuracy, making the tool suitable for a wide range of turning tasks on conventional and CNC lathes. Integration into tool systems and practical handling advantages Compatibility with a holder is determined by form, relief, tolerance class, fixation, size and thickness; the insert’s ISO designation simplifies selection of a matching external holder or boring bar. The insert is supplied with a cylindrical hole and a one-sided countersink (40°–60°), allowing secure fastening with standard screws and underlay/clamp sets. Clear system assembly reduces setup time and helps maintain alignment and repeatable clamping, which in turn protects the cutting edge and supports consistent batch processing. Discuss Tungaloy SH730 inserts with Metav Werkzeuge to confirm the optimal holder match and cutting grade for the application — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data Article number: 6862128 Manufacturer SKU: TUN6862128 Model series: ISO-Drehwendeschneidplatten Label: TPGT070101 SH730 Tungaloy-Wendeplatte Facts ISO designation: 070101 Cutting angle: 60° Relief angle: 11° Nose radius: 0.1 mm Thickness: 1.59 mm Size: 07 Special features Coating: SH730 Material: carbide Insert shape: triangular Hole: with cylindrical hole + single-side countersink (40°–60°) Chipbreaker: single-sided Application: turning FAQ What sizes and ISO designation does this insert use? The insert is an ISO triangular type with designation 070101 and size 07, listed as TPGT070101 SH730 by Tungaloy. Which materials is the coating grade SH730 suited for? The SH730 coated carbide is a tough grade suitable for a broad range of steels and variable cutting conditions where edge stability is required. How does the 0.1 mm nose radius affect surface finish? A 0.1 mm nose radius balances low cutting forces with improved surface quality, producing finer finishes than a larger radius while maintaining dimensional control. Is the insert compatible with standard holders? Compatibility depends on form, relief, tolerance class, fixation, size and thickness; the ISO designation aids selection of the correct external holder or boring bar for secure clamping. What chip control can be expected from the single-sided chipbreaker? The single-sided chipbreaker is optimised for controlled chip formation in general turning, aiding in evacuation and reducing risk of entanglement in typical operations. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPGT 070101 SH730 Wendeplatten - Tungaloy
Take advantage of the combination of a resilient cutting grade, compact geometry and secure mounting for consistent turning performance and low tooling costs; order the insert directly via Metav Werkzeuge or request application advice from the consultants. TPGT 070101 SH730 – indexable turning insert for turning, Tungaloy The TPGT 070101 SH730 is an ISO‑standard triangular indexable insert for external and internal turning, engineered for variable engagement conditions and small‑tool applications. Coated cemented carbide SH730 Triangular 60° insert, 0.1 mm corner radius One‑sided chipbreaker for turning Cylindrical hole with single‑side countersink Reliable cutting performance for variable engagement The SH730 cutting grade combines a coated cemented carbide substrate with a formulation tuned for edge stability and toughness. This results in predictable wear behaviour when using smaller tools or when engagement conditions change frequently. The grade is designed to maintain cutting edge integrity under oscillating loads, which supports longer effective tool life and reduced regrinding or replacement frequency. The outcome is a more stable process and fewer unexpected interruptions on the shop floor. Compact geometry that simplifies tool setup and repeatability A triangular insert with a 60° included angle and 0.1 mm corner radius offers a balance between robustness and versatility for profile and turning tasks. The cylindrical hole with single‑side countersink (40°–60°) enables secure clamping in compatible holders while facilitating accurate indexation. The nominal 1.59 mm thickness and standard ISO designation ensure interchangeability within ISO‑compliant tool systems; matching holders by form, clearance angle, tolerance class, fastening type, size and thickness is sufficient for correct seating and repeatable cutting positions. Practical advantages in workshop applications The single‑side chipbreaker promotes controlled chip formation in common turning operations, which aids chip evacuation and surface integrity. The insert’s modest thickness and compact profile make it particularly suited to tight‑access turning and light‑to‑medium duty machining where small tools are necessary. Technical queries or requests for compatibility checks can be directed to Metav Werkzeuge, where application data such as holder designation and machining parameters will be used to recommend the correct clamping and cutting parameters. Contact Metav Werkzeuge for tailored recommendations on Tungaloy SH730 inserts and assistance with holder compatibility — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6837557 SKU: 6837557-Tungaloy Manufacturer SKU: TUN6837557 Brand: Tungaloy Model series: ISO‑Drehwendeschneidplatten Material: Hartmetall Facts Corner radius: 0.1 mm Included angle: 60° Clearance (relief) angle: 11° Thickness: 1.59 mm Size: 07 ISO designation: 070101 Special features Coated cemented carbide grade SH730 Triangular insert form One‑sided chipbreaker Cylindrical hole with single‑side countersink (40°–60°) ISO‑normed turning insert, compatible with ISO holders FAQ What machining tasks is this insert intended for? The TPGT 070101 SH730 insert is intended for external and internal turning operations where a compact insert geometry and a tough cutting grade are required. How does the SH730 grade affect tool life? SH730 provides enhanced edge stability and toughness; this helps to maintain the cutting edge under variable engagement, often resulting in improved effective tool life for the insert. Which clamping features are needed for correct mounting? A compatible ISO turning holder matching the insert form, clearance angle, tolerance class, fastening method, size and thickness is required for secure mounting and repeatable positioning. What does the 070101 ISO code indicate? The ISO code denotes the insert geometry and size class according to ISO standards; 070101 corresponds to the triangular form, specific size 07 and the 101 style in the ISO system. Is the insert suitable for tight‑access turning applications? Yes, the compact thickness and triangular 60° geometry make the insert well suited to turning tasks with limited access or when small tools are preferred. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
TPGT 070101 SH730 Wendeplatten - Tungaloy
High process reliability from a resilient SH730 coated carbide and precise geometry, plus versatile application for external and internal turning — ideal for mixed engagement conditions and compact tool setups. Order the TPGT070101 SH730 turning insert directly via Metav Werkzeuge or ask our consultants if needed. TPGT 070101 SH730 indexable turning insert — triangular, 11° relief (Tungaloy) TPGT070101 SH730 is an ISO‑normed indexable insert for external and internal turning that offers a balance of edge stability and adaptability for varying cutting engagements. ISO‑normed triangular insert Coated carbide grade SH730 11° relief angle for versatile cutting Cylindrical hole with single‑side countersink (40°–60°) High-performance cutting designed for consistent material removal The insert delivers a dependable combination of wear resistance and toughness thanks to the coated carbide composition and the SH730 grade, which is optimised for turning under changing engagement conditions. The 11° relief and the 60° included angle provide stable cutting geometry for both facing and longitudinal turning. This geometry reduces cutting forces in many standard setups, enabling improved tool life and consistent chip formation. Measurable benefits include reliable edge retention during interrupted cuts and predictable finishing capability with the 0.1 mm corner radius. Simple integration into ISO tooling systems for fast changeovers As an ISO‑standard insert, compatibility is determined by form, relief angle, tolerance class, fastening, size and thickness. The triangular form and size 07 make the insert suitable for compact holders and small‑diameter applications where multiple index positions are required. The cylindrical hole with single‑side countersink (40°–60°) ensures repeatable seating and secure clamping, while the modest 1.59 mm thickness keeps the insert profile slim for constrained tool pockets. These features support rapid, repeatable tool changes and reduce set‑up time in production environments. Grade and chip control targeted at mixed and unstable cutting conditions The one‑sided chipbreaker and the SH730 coating are tuned to manage chips across a broad material range, improving process reliability when workpiece material or engagement varies. The triangular configuration provides three usable cutting edges per index, supporting economical tool usage. For applications that prioritise repeatable dimensional results and reduced rework, this insert offers a practical balance of edge stability and economy. The insert design favours predictable performance rather than aggressive optimisation for a single material, which is useful for workshops handling diverse turning tasks. For detailed application advice or to secure genuine Tungaloy inserts, contact Metav Werkzeuge via info@metav-werkzeuge.com or call +49 2822 7131930 — consultants can confirm fitment and recommend the optimal grade for the machining task Technical Data Article number: 6862129 SKU: 6862129-Tungaloy Manufacturer SKU: TUN6862129 Brand: Tungaloy Core specifications ISO designation: 070101 Insert size: 07 Thickness: 1.59 mm Included angle: 60° Relief angle: 11° Corner radius: 0.1 mm Hole: cylindrical + one‑side countersink (40°–60°) Materials & features Coated carbide grade SH730 Triangular insert form One‑sided chipbreaker For external and internal turning ISO‑standard indexable insert FAQ What machining tasks is this insert suited for? This TPGT070101 SH730 indexable insert is intended for external and internal turning where a balance of edge stability and versatility is required. How many cutting edges are available per insert? The triangular shape provides three indexable cutting edges on the insert, enabling economical use before replacement. What does the SH730 grade offer compared with other grades? SH730 is a coated carbide grade designed for toughness and edge security, supporting variable engagement conditions and reducing the risk of premature edge breakage. Is the insert compatible with standard ISO holders? Compatibility is achieved when the holder matches the insert form, relief angle, tolerance class, fastening method, size and thickness; the ISO designation 070101 facilitates matching to appropriate holders. What chip control features are included? The insert has a one‑sided chipbreaker tailored to deflect and break chips in a variety of turning operations. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPGT 070101 TH10 Wendeplatten - Tungaloy
Take advantage of the combination of a low‑force, sharp cutting edge and ISO compatibility for reliable turning operations; the TH10 grade delivers clean surface finish on non‑ferrous materials while the compact triangular form and 0.1 mm nose radius ensure accurate profiles and easy tool changeover. Order through Metav Werkzeuge or request technical advice from the consultants for holder compatibility and stock availability. TPGT070101 TH10 — ISO triangular turning insert, 0.1 mm nose radius — Tungaloy A TPGT070101 TH10 ISO turning insert engineered for precise external and internal turning where a sharp, uncoated cutting edge reduces cutting forces and improves surface quality. Universal sharp grade TH10 for non‑ferrous workpieces Triangular 07 insert, 60° included angle Single‑sided chipbreaker for consistent chip control Cylindrical hole with 40°–60° countersink Uncoated carbide for low cutting forces Accurate geometry for repeatable profile control The insert is built to the ISO standard, enabling straightforward replacement and inventory standardisation across toolrooms. With a 60° included angle and a nose radius 0.1 mm, the triangular geometry supports precise contouring and close tolerances on turned parts. The 11° clearance angle helps to prevent rubbing while the 1.59 mm thickness provides sufficient edge support in light to medium turning. These measurable characteristics translate into stable cutting conditions and predictable component quality on batch and single‑piece production runs. Low cutting forces and reliable surface finish for non‑ferrous applications The TH10 composition is an uncoated carbide grade optimised for non‑ferrous metals; it supports a low cutting forces regime that reduces power draw and minimises distortion on thin or fragile sections. The single‑sided chipbreaker promotes consistent chip formation and evacuation, which in turn preserves the cutting edge and produces cleaner surfaces. For customers processing brass, aluminium alloys or similar materials, this insert gives a balance of sharpness and durability without the adhesion risks that some coated grades can introduce. Fast changeover and predictable clamping behaviour to keep production running Designed with a cylindrical hole and a one‑sided countersink (40°–60°), the insert secures reliably in ISO‑compatible holders and supports repeatable seat location. Compatibility is determined by form, clearance angle, tolerance class, fixing method, size and thickness; using standardised inserts reduces setup time and shortens downtime during tool changes. As part of a system—insert, holder, clamp set and replacement screws—this triangular insert helps to maintain process stability and simplifies spare‑part logistics on the shop floor. For Tungaloy TH10 inserts such as this TPGT070101, contact Metav Werkzeuge to check holder compatibility and current availability; Metav Werkzeuge’s technical advisors can recommend the optimum clamp and cutting parameters for the intended turning application Technical data Article number: 6862159 SKU: 6862159-Tungaloy Manufacturer SKU: TUN6862159 Brand: Tungaloy Model series: ISO turning indexable inserts Core technical data Included angle: 60° Clearance angle: 11° Nose radius: 0.1 mm Thickness: 1.59 mm Size: 07 Design and features Triangular insert form Single‑sided chipbreaker Cylindrical hole + one‑side countersink (40°–60°) Material: uncoated carbide Grade: TH10 Application: turning (external and internal) Compatibility determined by form, clearance angle, tolerance, fixing, size and thickness FAQ What materials is this insert best suited to? The TPGT070101 TH10 Tungaloy insert (SKU 6862159‑Tungaloy) is formulated for non‑ferrous materials such as brass and aluminium alloys; the TH10 uncoated carbide grade supports low cutting forces and clean finishes. How does the TH10 uncoated grade compare to coated alternatives? TH10 offers a sharper uncoated cutting edge that reduces adhesion and cutting forces on non‑ferrous workpieces, whereas coated grades may provide greater wear resistance on harder or abrasive materials. What does the cylindrical hole with countersink mean for clamping? The cylindrical hole plus a single‑side countersink (40°–60°) secures the insert centrally and assists in accurate seating in ISO holders, improving repeatability during insert changes. How to verify if the insert fits an existing holder? Fit is determined by insert form, clearance angle, tolerance class, fixing method, size and thickness; matching these parameters to the holder specification ensures correct clamping and function. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
TPGT 070101 TH10 Wendeplatten - Tungaloy
Take advantage of the combination of uncoated carbide TH10 for low cutting forces and a 0.1 mm corner radius for fine surface finishes to improve cycle consistency and component quality. Order directly via Metav Werkzeuge or request compatibility advice from our consultants. TPGT070101 TH10 – ISO triangular indexable turning insert, Tungaloy A TPGT070101 TH10 indexable turning insert designed for ISO-compatible external and internal turning with a triangular 07 format. Uncoated TH10 grade carbide Triangular 07 format, 60° included angle 0.1 mm corner radius for fine finishing Centre hole with 40°–60° single-sided countersink Efficient machining of non-ferrous materials and low-force applications The uncoated carbide composition in combination with the TH10 grade provides an indexable turning insert optimised for materials and operations that benefit from reduced cutting forces and improved surface integrity. The uncoated edge promotes low friction at the cutting zone, which helps to achieve a clean surface finish and reduces the tendency for built-up edge when machining softer, non-ferrous workpieces. For operations where chip control and edge life are balanced against the need for minimal cutting energy, this geometry-supporting grade delivers consistent results while keeping process forces moderate. Geometry tuned for precision and repeatable finishing A small 0.1 mm corner radius and the 60° included angle deliver an edge geometry suited to fine finishing and dimensional control. The 11° rake angle supports smooth shearing action, while the single-sided chipbreaker helps direct chips away from the cutting zone to avoid re-cutting and surface damage. The insert's centre hole with a 40°–60° countersink ensures secure clamping in compatible toolholders, reducing vibration and improving repeatability. Together, these features aid a stable cutting process and enable precise, repeatable contouring on turned components. ISO compatibility and straightforward tool integration Designed to the ISO model series for turning inserts, the triangular size 07 format with 1.59 mm thickness integrates with standard external holders or boring bars when the holder form, relief angle, tolerance class, fastening and thickness match. Compatibility depends on matching the holder interface and clamping hardware; the insert is normally used as part of a system comprising an ISO indexable plate, a matching external holder or boring bar, a shim/clamp plate and the appropriate screw. This straightforward system approach keeps changeovers quick and reduces machine downtime while maintaining consistent cutting performance. For tailored selection assistance or to confirm holder compatibility for Tungaloy indexable inserts, contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 — our technical team will advise on the optimal solution for the application Technical data Article number: 6862176 SKU: 6862176-Tungaloy Manufacturer SKU: TUN6862176 Model series: ISO turning indexable inserts Product designation: TPGT070101 TH10 Facts Included angle: 60° Corner radius: 0.1 mm Rake (free) angle: 11° Thickness: 1.59 mm Size: 07 Special features Material: uncoated carbide Grade: TH10 Chipbreaker: single-sided Hole: cylindrical hole with single-sided countersink (40°–60°) Platen form: triangular Application: Turning (external and internal) WPL ISO code: 070101 FAQ Which materials are best suited to this insert? The TPGT070101 TH10 insert is intended primarily for non-ferrous materials and similar applications where an uncoated carbide edge offers low cutting forces and good surface quality. Is the insert suitable for finishing passes? Yes, the small corner radius of 0.1 mm and the sharp uncoated edge make the insert appropriate for fine finishing and dimensional control. How should compatibility with a holder be checked? Verify that the holder matches the triangular size 07, 1.59 mm thickness and the ISO clamping style; correct matching of form, relief angle, tolerance class and fastening ensures secure clamping for the insert. Does this grade have a coating? No, the TH10 grade in this configuration is uncoated carbide, chosen to support low cutting forces and clean machined surfaces. Can the insert be used for internal turning operations? Yes, the insert is suitable for both external and internal turning when used with an appropriate boring bar or internal holder designed for triangular ISO inserts. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPGT 070102 SH7025 Wendeplatten - Tungaloy
Take advantage of the combination of robust edge stability, coated carbide grade SH7025, and compact geometry for consistent performance in turning operations; order via Metav Werkzeuge or consult our technical team for application advice. TPGT 070102 SH7025 indexable turning insert — triangular 60° geometry for turning, Tungaloy TPGT 070102 SH7025 is an ISO-grade indexable insert for turning, designed to deliver reliable edge control and consistent chip formation in variable engagement conditions. Triangular 60° geometry for versatile turning Coated carbide grade SH7025 for edge stability 0.2 mm corner radius for fine finishing Cylindrical hole with 40°–60° countersink Consistent cutting performance with optimised grade and geometry The combination of the SH7025 coated carbide and a triangular 60° geometry yields a balance between robustness and precision that supports both roughing and finishing passes. The insert’s 0.2 mm corner radius reduces cutting forces at small depths of cut, helping to achieve improved surface quality on machined components. Designed as an ISO-grade indexable insert, the plate suits typical turning tasks where frequent insert changes or varying engagement require a stable cutting edge and repeatable results. Controlled chips and reliable edge security for variable conditions A single-sided chipbreaker and the coated carbide substrate work together to manage chips effectively under changing cutting conditions. The insert’s 11° relief angle and the one-sided chip control reduce the tendency for built-up edge and support thermal stability in interrupted cuts. This results in fewer unplanned tool changes and higher machine uptime, which contributes directly to process economy and predictability on the shop floor. Compact thickness and hole design for secure clamping With a plate thickness of 1.59 mm and a centred cylindrical hole with a one-sided countersink (40°–60°), the insert is intended for secure mounting in compatible external holders or boring bars. The small form factor is particularly suitable for operations on compact holders or limited-overhang setups, where rigidity and repeatable clamping orientation are essential. Compatibility is determined by form, clearance angle, tolerance class, fastening and thickness, so use matching holders for best results. Practical application guidance and material coverage This insert is tailored for turning applications and is recommended where a tough, edge-stable grade is required—especially for smaller tooling or when engagement conditions vary. The ISO-grade design ensures interchangeability across standard holders, while the single-sided chipbreaker helps maintain a consistent chip shape for an extended range of materials. Select the chipbreaker and grade according to workpiece material and machining strategy to maximise tool life and part quality. Contact Metav Werkzeuge to discuss suitability for specific parts, request a quotation for the TPgT 070102 SH7025 insert, or obtain precise tooling recommendations — eMail: info@metav-werkzeuge.com, Tel: +49 2822 7131930 Technical Data Article number: 6967558 Manufacturer SKU: TUN6967558 SKU: 6967558-Tungaloy Model series: ISO turning indexable inserts Facts Insert size: 07 Included angle: 60° Corner radius: 0.2 mm Relief angle: 11° Thickness: 1.59 mm Hole: with hole; cylindrical hole + one-sided countersink (40°–60°) Manufacturer article number: 6967558 Special features Coated carbide grade SH7025 Triangular plate form Single-sided chipbreaker ISO-standard turning insert Application: turning (external and internal) Compatibility: external holder or boring bar; clamping set and replacement screws required FAQ What materials is this insert suitable for? The TPGT 070102 SH7025 insert is supplied in a coated carbide grade designed for a broad range of turning tasks; suitability depends on the specific workpiece material and cutting parameters. What does the SH7025 grade provide? SH7025 is a tough, edge-stable coated carbide grade that offers good performance for turning operations, especially when smaller tools or variable engagement require consistent edge security. How does the hole and countersink affect mounting? The cylindrical hole with a one-sided countersink (40°–60°) secures the insert in the seat and ensures correct clamping orientation when used with compatible holders and clamping sets. Is the insert compatible with standard ISO holders? Yes, the insert follows ISO-design conventions for turning plates; compatibility with a specific holder is determined by form, clearance angle, tolerance class, fastening type, size and thickness. What finishing results can be expected with a 0.2 mm radius? A 0.2 mm corner radius supports fine finishing passes and helps achieve improved surface quality at shallow depths of cut while limiting cutting forces. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPGT 070102 SH7025 Wendeplatten - Tungaloy
Take advantage of the combination of reliable edge stability, ISO‑standard compatibility and simple integration into existing turning systems for consistent production results; order original Tungaloy inserts directly via Metav Werkzeuge or consult our specialists for application support. TPGT 070102 SH7025 indexable turning insert by Tungaloy — triangular, coated carbide, 60° included angle The TPGT 070102 SH7025 is a triangular, ISO‑standard indexable turning insert designed for general external and internal turning where a tough, edge‑stable carbide grade is required. Coated carbide SH7025 for edge stability Triangular 60° geometry for versatile turning 0.2 mm corner radius for fine surface finish Central hole with countersink for secure clamping Single‑sided chipbreaker for controlled chips Greater process reliability through a tough, coated carbide grade The combination of a coated carbide substrate and the SH7025 grade delivers a tough, cutting‑edge stable performance that is especially beneficial on smaller tool bodies or where engagement conditions change frequently. This chemistry and coating balance wear resistance with fracture toughness, enabling longer tool life under variable feeds and interruptions. As a result, cycle times become more predictable and tool changes are reduced, improving overall machining economy. Simple system integration and ISO compatibility reduce setup time Manufactured to ISO form and dimensions, the insert ensures predictable fitment in compatible holders; compatibility is determined by form, relief angle, tolerance class, fastening, size and thickness. The ISO‑standard geometry and the central fixing hole with a countersink (40°–60°) make clamping reliable, while the 11° relief and 1.59 mm thickness support a stable cutting position. These attributes simplify tool choice and shorten set‑up, translating to faster production ramp‑up and fewer fitment checks. Select the right chipbreaker and grade for material and operation The one‑sided chipbreaker on this insert gives controlled chip formation for many turning tasks; pairing the single‑sided chipbreaker with the SH7025 grade offers a pragmatic choice for mixed‑material shops. For finishing passes the 0.2 mm corner radius helps produce finer surface quality, whereas heavier roughing can benefit from the grade’s toughness. Choosing matching holders and clamping components completes the system and ensures the intended performance. Durable performance and straightforward tool handling The triangular shape with a 60° included angle provides three usable cutting edges per index, supporting efficient edge utilisation and predictable replacement intervals. The thin, 1.59 mm plate thickness and central hole design allow compact tool assemblies and reliable seating on shims or clamp sets. Together, these features support sustained productivity and reduce unplanned downtime through consistent, repeatable behaviour. Contact Metav Werkzeuge today for tailored advice on applications for the Tungaloy SH7025 grade and to order genuine Tungaloy inserts via Metav Werkzeuge; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6967567 Manufacturer article number: 6967567 Manufacturer SKU: TUN6967567 SKU: 6967567-Tungaloy Model series: ISO turning indexable insert series Material: Carbide Measured data Corner radius: 0.2 mm Included angle: 60° Relief angle: 11° Thickness: 1.59 mm Size designation: 07 Special features ISO designation: TPGT070102 Grade: SH7025 (coated carbide) Plate shape: triangular Hole: with hole — cylindrical + one‑sided countersink (40°–60°) Chipbreaker: single‑sided Typical application: external and internal turning System components: insert, matching external holder or boring bar, shim/clamp set and replacement screws FAQ Is this insert suitable for internal turning operations as well as external turning? The TPGT 070102 SH7025 insert is designed for both external and internal turning tasks; its triangular geometry and small thickness make it adaptable in many holder and boring bar arrangements. What does the SH7025 designation mean for performance? SH7025 identifies a coated carbide grade tuned for toughness and cutting‑edge stability, offering reliable performance on smaller tools or when cutting conditions vary. How is the insert clamped in the holder? The insert is retained via its central cylindrical hole with a one‑sided countersink (40°–60°), providing a secure, repeatable seat when used with the correct shim or clamp set. Which chipbreaker should be chosen for fine finishing? For finer surface finishes, combine the single‑sided chipbreaker with lower feeds and the 0.2 mm corner radius to reduce roughness while retaining controlled chip formation. How many cutting edges are available before indexing? The triangular plate provides three usable cutting edges per insert, enabling efficient edge rotation and predictable replacement scheduling. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com