TPMR 2204PD GH330 Wendeplatten - Tungaloy
Taking advantage of the GH330 cutting grade and the modular TungMeister system ensures predictable tool life and stable cutting performance; combine wear resistance, edge stability and quick insert changes for efficient milling. Order the insert directly via Metav Werkzeuge or consult the team for application advice. TPMR2204PD GH330 triangular indexable insert for milling — Tungaloy The TPMR2204PD GH330 is an indexable insert intended for modular TungMeister milling systems, engineered for shoulder, slot, face and contour milling depending on the chosen cutter head geometry. GH330 grade for wear resistance and toughness Triangular 22 mm insert with 60° geometry Single-sided chipbreaker for controlled chips Modular TungMeister system compatibility Longer, more reliable cutting with GH330 grade The insert combines a GH330 carbide composition with an optimised geometry to deliver consistent wear resistance and cutting-edge stability. In practice this means fewer unscheduled tool changes and more predictable cycle times on the shop floor; the material choice balances hardness and toughness so the cutting edge resists wear without becoming brittle. For users less familiar with grade designations: the grade defines the carbide microstructure and bonding phases that govern flank wear, edge chipping and service life under varying feeds and speeds. Reduced inventory and faster changeovers through modular design Integrated into the TungMeister modular system, the insert benefits from a solution that separates the milling head from the reusable shaft. The ability to replace only the worn cutting head reduces component stock levels and shortens maintenance time, improving overall equipment effectiveness. The triangular 22 mm size and 60° geometry support a range of milling tasks while the absence of a central hole simplifies mounting in compatible heads, giving a practical balance of flexibility and standardisation for production environments. Controlled chip formation and stable cutting conditions A single-sided chipbreaker on the insert promotes predictable chip control, which is particularly valuable during interrupted cuts and shoulder milling where chip evacuation affects surface finish and tool life. The combination of a dedicated chip control feature and a robust carbide substrate supports steady-cutting conditions and can help maintain surface integrity on workpieces. For machinists, this translates into improved repeatability and less rework, especially when processing components that require consistent dimensional quality. For high-process reliability with Tungaloy’s GH330 grade and TungMeister compatibility, contact Metav Werkzeuge for technical guidance and availability — info@metav-werkzeuge.com / +49 2822 7131930 Technical Data Article number: 6809140 SKU: 6809140-Tungaloy Manufacturer SKU: TUN6809140 Manufacturer: Tungaloy Model series: TungMeister Application: Milling Facts Size: 22 mm Thickness: 4.76 mm Corner radius: 0 mm Relief angle: 11° Included angle: 60° Special features Tool material: carbide Grade: GH330 Insert form: triangular Chipbreaker: single-sided Hole: none System: modular milling insert for TungMeister FAQ What applications suit this insert best? The TPMR2204PD GH330 insert is designed for milling tasks such as shoulder, slot, face and contour milling when used in a TungMeister modular head. Which materials can be machined with this insert? The GH330 grade and carbide construction make the insert suitable for general milling demands where wear resistance and edge stability are required. How is the insert secured in the cutter head? The insert fits into compatible TungMeister cutter heads designed for triangular, holeless inserts; mounting relies on the head’s clamping system rather than a central hole. Does the insert offer chip control features? Yes, the insert features a single-sided chipbreaker to promote controlled chip formation and improved evacuation during milling. What are the key dimensional specifications of the insert? The insert measures 22 mm across, is 4.76 mm thick, has a 0 mm corner radius, a relief angle of 11° and an included angle of 60°. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMR 2204PD T3130 Wendeplatten - Tungaloy
The combination of the T3130 carbide grade and a triangular 60° cutting geometry delivers durable edge stability and consistent chip control for productive milling. Order the insert directly via Metav Werkzeuge or consult their technical advisors for application support. TPMR 2204PD T3130 indexable insert for milling – Tungaloy The TPMR2204PD is an indexable insert for modular milling systems, designed for shoulder, slot, face and contour milling within the TungMeister system. T3130 carbide grade for wear resistance and toughness Triangular insert, 22 mm inscribed circle, 60° included angle Single-sided chipbreaker for controlled chip formation Designed for the TungMeister modular milling system Improved productivity through optimised cutting grade The choice of T3130 as the cutting-grade substrate combines wear resistance with sufficient toughness, reducing flank wear and minimising unexpected edge failure under interrupted milling conditions. This translates directly into longer intervals between indexings and reduced tool-change downtime, enhancing process efficiency. For workshops aiming to increase throughput, the grade supports higher metal removal rates while retaining surface quality, which helps to lower unit machining costs without sacrificing part accuracy. Flexibility and economy with a modular system Designed for the TungMeister modular milling concept, the insert integrates into a system of replaceable heads and reusable shafts, enabling fast adaptation to diverse milling tasks. The modular approach reduces tooling inventory and simplifies logistics: one shank can accept multiple head geometries, while spare inserts are sourced as required. This system-based setup is particularly advantageous for job shops and production cells that require quick changeovers and predictable tool budgeting. Controlled cutting behaviour from geometry and chip control The triangular insert form with a 60° included angle and a single-sided chipbreaker offers stable cutting edges and reliable chip evacuation in a range of milling operations. The insert’s 4.76 mm thickness and 11° relief angle provide a robust cutting edge capable of withstanding moderate radial engagement, while the zero corner radius supports precise shoulder and slot features. The single-sided chipbreaker is configured to encourage consistent chip segmentation, reducing the risk of entangling chips and aiding coolant penetration where applicable. Application scope and handling recommendations Suitable for shoulder, slot, face and contour milling depending on head geometry, this indexable insert supports a broad material mix when used with appropriate cutting parameters. Its carbide construction provides stable performance in steels and alloyed materials; when optimising tool life, consider modest depth of cut and incremental feed adjustments for interrupted cuts. Regular inspection of edge condition and adherence to recommended speeds will ensure consistent surface finish and repeatable results in serial production. For high-demand milling tasks, request the Tungaloy TPMR2204PD T3130 inserts from Metav Werkzeuge or arrange an application consultation via info@metav-werkzeuge.com or +49 2822 7131930 to match insert choice to component requirements Technical Data Article number: 6853862 Manufacturer SKU: TUN6853862 SKU: 6853862-Tungaloy Model series: TungMeister Brand: Tungaloy Facts Included angle: 60° Inscribed circle: 22 mm Thickness: 4.76 mm Relief angle: 11° Corner radius: 0 mm Special features Carbide substrate Grade: T3130 Shape: triangular Chipbreaker: single-sided Hole style: without hole Application: milling System compatibility: TungMeister modular milling system FAQ What materials is this insert suitable for? The TPMR2204PD T3130 insert from Tungaloy is intended for milling operations and offers a balance of wear resistance and toughness suitable for a wide range of steels and common alloyed materials when used with appropriate cutting data. How does the T3130 grade affect tool life? The T3130 carbide grade in the Tungaloy TPMR2204PD provides improved wear resistance and edge stability, which typically extends tool life under stable cutting conditions and reduces the frequency of indexings. What is the significance of the triangular 60° geometry? A triangular 60° geometry delivers three usable cutting edges per insert and is well suited to shoulder and slot milling; the shape offers good accessibility in contouring applications and predictable load distribution at the cutting edge. Can this insert be used in an existing modular system? Yes, the TPMR2204PD is designed for the TungMeister modular milling system and is compatible with the corresponding heads and reusable shafts of that product family. What chip control features are included? The insert features a single-sided chipbreaker designed to promote consistent chip segmentation and evacuation, improving surface finish stability and reducing the risk of chip-related interruptions during milling. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 090202 AH6225 Wendeplatten - Tungaloy
Take advantage of the combination of a PVD‑coated carbide grade AH6225 and a 0.2 mm corner radius for stable cutting in medium turning operations; the ISO‑compliant triangular form with a secure clamping hole ensures repeatable indexing and reduced downtime. Order directly via Metav Werkzeuge or consult our specialists for application-specific selection. TPMT090202 AH6225 — ISO turning insert, triangular, 0.2 mm radius — Tungaloy The TPMT090202 AH6225 is a triangular ISO insert designed for general turning, optimised for machining stainless steels with a sharp, durable cutting edge. ISO‑compliant triangular insert PVD‑coated AH6225 carbide grade 0.2 mm corner radius for fine finish With hole and countersink for secure clamping Consistent cutting performance for stainless steels The PVD‑coated carbide composition and the AH6225 grade combine to deliver a balance of sharpness and edge stability suited to stainless steels in medium machining. The coating improves wear resistance and helps maintain a consistent cutting edge under varying conditions, which reduces frequency of insert changes and supports predictable cycle times. The single‑sided chipbreaker controls chip formation, lowering the risk of long, tangled swarf and improving surface finish on external and internal turning operations. Secure design for repeatable positioning and surface quality A triangular geometry with a 60° included angle and corner radius 0.2 mm provides reliable strength while enabling good surface quality on finishing passes. The insert is 2.38 mm thick and features an 11° clearance angle, ensuring proper contact with the workpiece and preventing rubbing under typical turning feeds. The hole with cylindrical bore plus single‑side countersink (40°–60°) facilitates positive clamping in ISO holders and boring bars, minimising movement and improving repeatability across indexed edges. Practical system benefits and application guidance The insert is part of an ISO system: combine it with the appropriate external holder or boring bar, a matching shim/clamp set and the correct replacement screws to achieve optimal clamping and tool life. Selection of grade and chipbreaker should reflect workpiece material and process stability; AH6225 is recommended as a universal option for rostfreie Stähle (stainless steels) in environments requiring both a sharp cutting action and a robust edge. This approach reduces setup time and supports efficient production workflows while maintaining component quality. For tailored advice on integrating Tungaloy TPMT090202 AH6225 inserts into production, and to secure supply through Metav Werkzeuge, contact info@metav-werkzeuge.com or call +49 2822 7131930 for prompt technical guidance and ordering. Technical data Article number: 6831059 Manufacturer SKU: 6831059-Tungaloy Model series: ISO‑turning inserts Facts Radius: 0.2 mm Included angle: 60° Clearance angle: 11° Thickness: 2.38 mm Size: 09 Design and special features PVD‑coated carbide Grade AH6225 Triangular insert With hole: cylindrical hole + single‑side countersink (40°–60°) Single‑sided chipbreaker ISO‑compliant for turning Application: Turning Compatible with ISO external holders and boring bars Suitable for stainless steels; designed for medium machining and varying conditions FAQ What materials is this insert suitable for? The TPMT090202 AH6225 insert is designed primarily for stainless steels and performs well in medium turning operations where a balance of sharpness and edge stability is required. How does the chipbreaker affect machining? The single‑sided chipbreaker on the TPMT090202 AH6225 controls chip shape and evacuation, improving surface finish and reducing the risk of entangled swarf in turning applications. Which clamping systems are compatible with this insert? The insert's cylindrical hole with a single‑side countersink (40°–60°) is intended for ISO‑compliant external holders or boring bars using the standard shim/clamp and screw set listed in the system setup. What are the key dimensions to check for holder compatibility? Check the size (09), thickness (2.38 mm), included angle (60°) and clearance angle (11°) to ensure compatibility with the intended ISO holder and tolerance class. Can this insert be used for internal as well as external turning? Yes; the ISO triangular form and chip control make the TPMT090202 AH6225 suitable for both external and internal turning when mounted in an appropriate boring bar or holder. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 090202 AH6235 Wendeplatten - Tungaloy
Compact durability and consistent chip control make this indexable insert a reliable choice for demanding turning operations; its PVD-coated AH6235 grade and 0.2 mm nose radius deliver a balance of toughness and finish. Order the insert directly via Metav Werkzeuge or ask our consultants for application guidance. TPMT090202 AH6235 — Tungaloy indexable turning insert for turning, PVD-coated carbide A TPMT090202 AH6235 indexable turning insert engineered for robust performance in stainless steels and interrupted cutting applications PVD-coated carbide AH6235 for toughness 0.2 mm nose radius for precise finishing 11° relief angle for reliable seating Triangular 09 insert with cylindrical hole Consistent performance for stainless-steel turning and interrupted cuts The PVD-coated carbide grade AH6235 was developed to resist chipping in demanding environments, making the insert well suited to stainless steels and interrupted cuts. Its tougher substrate reduces edge fracture, which translates into fewer indexings and steadier cycle times. The modest 0.2 mm nose radius supports fine surface finishes while maintaining cutting-edge strength, so manufacturers benefit from improved component quality without sacrificing productivity. Simple integration into ISO tooling systems for quick set-up Designed to the ISO indexable insert series, the triangular 09 format and 2.38 mm thickness ensure compatibility with a wide range of external holders and boring bars when the form, 11° relief angle, tolerance class, fastening method, size and thickness match. The insert’s cylindrical hole with a single-sided countersink (40°–60°) provides secure clamping and repeatable seating. Specify a suitable chipbreaker and grade according to workpiece material and machine rigidity to achieve predictable cutting results. Improved chip control and longer productive life The single-sided chipbreaker geometry combined with the AH6235 grade promotes controlled chip formation and evacuation, reducing the risk of built-up edge and secondary damage. For operations where breakage risk is elevated, the enhanced toughness of the coating and substrate increases tool life, lowering tool change frequency and supporting steady operation. This insert contributes to a more economical turning process through fewer interruptions and more consistent part quality. For demanding turning tasks on stainless steels, select the Tungaloy TPMT090202 AH6235 insert via Metav Werkzeuge — technical consultants are available at info@metav-werkzeuge.com or +49 2822 7131930 to assist with application-specific recommendations Technical data Article number: 6890198 Manufacturer SKU: TUN6890198 Brand: Tungaloy Model series: ISO indexable turning inserts ISO designation: TPMT090202 Name: TPMT090202 AH6235 Tungaloy insert Material: carbide Coating: AH6235 (PVD) Core specifications Insert size: 09 Thickness: 2.38 mm Nose radius: 0.2 mm Relief angle: 11° Included angle: 60° Features Triangular insert With hole: cylindrical hole + single-sided countersink (40°–60°) One-sided chipbreaker Suitable for turning Grade optimised for stainless steels and interrupted cuts PVD-coated carbide FAQ What materials is this insert best suited for? The TPMT090202 AH6235 insert is optimised for stainless steels and performs well in interrupted cutting where increased fracture resistance is required. How does the AH6235 grade affect tool life? The PVD-coated AH6235 grade combines a tough substrate with a protective coating to reduce edge chipping and extend productive service life under demanding turning conditions. Which holders are compatible with the insert? Compatibility depends on holder form, relief angle, tolerance class, fastening method, size and thickness; the ISO designation TPMT090202 facilitates selection of a matching external holder or boring bar. What chip control can be expected from the insert? The single-sided chipbreaker helps produce controlled chips and improves evacuation, reducing the likelihood of built-up edge and secondary surface damage. Is the insert supplied with mounting screws or clamping parts? The item is an indexable insert intended for use with appropriate holders and clamping sets; refer to holder specifications for required screws and pads Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 090202 AH725 Wendeplatten - Tungaloy
Benefit from a PVD-coated AH725 grade offering broad material coverage and reliable chip control, combined with a 0.2 mm corner radius and ISO-standard triangular geometry for stable external and internal turning. Order directly via Metav Werkzeuge or consult our specialists for application-specific guidance. TPMT 090202 AH725 Tungaloy turning insert — PVD-coated carbide, 0.2 mm radius The TPMT 090202 AH725 is an ISO-standard triangular turning insert designed for robust external and internal turning of steel and stainless steel, featuring a one-sided chipbreaker and a cylindrical hole with single-sided countersink for secure clamping. PVD-coated AH725 universal grade 60° triangular geometry with 0.2 mm radius Cylindrical hole with single-sided countersink ISO-standard fit for external and internal turning Stable machining for steels and stainless steels The AH725 grade is a PVD-coated, wear-resistant cemented carbide developed for universal performance across steel and stainless steel workpieces. Its formulation and coating provide a balance between toughness and edge stability, which reduces the risk of chipping during interrupted cuts or when machining mixed batches of materials. The combination of grade and coating supports consistent surface quality and predictable tool life, making it a practical choice where process security and repeatability are priorities in production turning. Precise geometry and secure clamping for reliable results The insert’s 60° triangular form and 0.2 mm corner radius are optimised for finishing and general-purpose turning, enabling controlled engagement and clearances in common holder systems. The plate is ISO-standard in size (09) with a thickness of 2.38 mm, and the cylindrical hole with a single-sided countersink (40°–60°) ensures a repeatable, torque-resistant fit to compatible holders. Compatibility depends on form, free angle, tolerance class, fastening method, size and thickness; matching the insert to a suitable external holder or boring bar and the correct clamping set is essential for consistent performance. Improved chip control and process reliability Equipped with a one-sided chipbreaker, the insert promotes effective chip formation and evacuation under a range of cutting conditions, reducing re-cutting and thermal loading on the edge. The small corner radius delivers a fine edge for good surface finish while still providing sufficient strength for interrupted cuts on smaller tools or less rigid setups. This balance of features enhances productivity by lowering the risk of unexpected tool failure and by supporting calmer vibration behaviour during turning operations. System approach and application advice The insert is intended to function as part of a system: ISO-standard turning insert, a matched external holder or boring bar, suitable shim/clamp set and replacement screws. Selection of the correct chipbreaker and grade should be guided by the workpiece material, machining operation and toolholder stability. For mixed-material batches or applications demanding high process reliability, the AH725 grade offers broad applicability and consistent edge life, reducing frequent tool changes and downtime. Contact Metav Werkzeuge today for application support or to request the TPMT 090202 AH725 for turning operations — email info@metav-werkzeuge.com or call +49 2822 7131930 for tailored advice Technical Data Article number: 6856672 Manufacturer SKU: TUN6856672 SKU: 6856672-Tungaloy Model series: ISO turning inserts Material: cemented carbide Grade/coating: AH725, PVD-coated Facts Insert designation: TPMT090202 ISO code: 090202 Corner radius: 0.2 mm Included angle: 60° Rake angle: 11° Plate thickness: 2.38 mm Plate size: 09 Special features Triangular plate form Cylindrical hole with single-sided countersink (40°–60°) Single-sided chipbreaker Designed for external and internal turning Compatible with ISO-standard holders Universal, break-resistant grade for steel and stainless steel FAQ What materials is this insert suitable for? The AH725 grade and PVD-coated cemented carbide substrate make the insert suitable for machining steel and stainless steel, with a universal, break-resistant performance profile. How does the TPMT 090202 secure to the holder? The cylindrical hole with single-sided countersink provides a torque-resistant clamping interface; compatibility is determined by holder form, free angle, tolerance class and plate thickness. When should the one-sided chipbreaker be chosen? The one-sided chipbreaker on this insert improves chip control in general turning tasks and is especially useful when stable chip flow and reduced re-cutting are required. Is the insert suitable for both external and internal turning? Yes; the ISO-standard triangular geometry and available holder systems allow use in both external and internal turning applications when paired with a compatible external holder or boring bar. What benefit does the 0.2 mm corner radius provide? A 0.2 mm corner radius balances edge strength and surface finish, offering a fine edge for finishing while maintaining resistance to edge chipping in modestly interrupted cuts. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 090202 AH725 Wendeplatten - Tungaloy
Take advantage of reliable process security and broad material capability combined with a robust PVD-coated AH725 carbide grade for consistent performance; order original inserts directly via Metav Werkzeuge or contact our consultants for application advice. TPMT090202 AH725 TPMT — ISO turning insert, PVD-coated carbide, Tungaloy A TPMT090202 AH725 ISO turning insert designed for external and internal turning applications, featuring a 60° triangular form and an 11° clearance angle for versatile, secure metalcutting. PVD-coated carbide grade AH725 60° triangular insert, 0.2 mm corner radius Single-sided chipbreaker, hole with countersink ISO 09 size, 2.38 mm thickness Proven performance for mixed-material turning The PVD-coated AH725 grade is formulated as a universal, chipbreak-resistant option for machining steel and rostfreier Stahl, delivering stable cutting-edge life where workpiece materials vary. PVD coating improves wear resistance and reduces built-up edge tendency, which translates into longer tool life and fewer interruptions. The combination of the PVD layer and the carbide substrate gives a balance between toughness and hardness, making the insert particularly suitable for smaller tools and operations demanding high process security. For shops requiring predictable results across a range of components, this insert minimises downtime and supports steady productivity. Geometry that supports accuracy and surface quality The triangular 60° form with a 0.2 mm corner radius provides predictable tool engagement and straightforward programming for turning cycles. The 11° clearance angle reduces rubbing on the flank and helps preserve dimensional accuracy and surface finish during external and internal turning. The single-sided chipbreaker promotes controlled chip formation in common cutting conditions, lowering the risk of entanglement and improving swarf handling. For less experienced operators, these geometric choices simplify setup and make achieving repeatable tolerances easier, while experienced machinists benefit from reduced trial-and-error when optimising feeds and speeds. Compatibility, mounting and system considerations As an ISO-standard insert, the plate is compatible with holders when form, clearance angle, tolerance class, fastening method, size and thickness are matched. The TPMT090202 variant includes a cylindrical hole with a one-sided countersink (40°–60°) to suit standard clamping arrangements, while the 2.38 mm plate thickness and ISO 09 size ensure interchangeability with common external holders or boring bars. When integrating into a tool system, confirm the tolerance class and fastening geometry to preserve clamping stability; correct seating and torque of the clamping screw are decisive for achieving the advertised repeatable performance. Practical benefits and recommended use cases Select this insert where a robust all-rounder is needed: frequent material changes, smaller tool shanks, or operations where process reliability outweighs maximised material removal rates. The AH725 grade supports productive machining with good edge stability and broad material coverage, reducing the need for multiple grades in mixed-production environments. For finishing passes on shaft work or medium-duty turning of components in batch production, the insert offers consistent surface quality and service life, helping to streamline tooling inventories and simplify tool management. Contact Metav Werkzeuge for tailored application guidance on Tungaloy AH725 inserts — reference SKU 6865359-Tungaloy or manufacturer SKU TUN6865359 for fast support, or email info@metav-werkzeuge.com / call +49 2822 7131930 Technical data Article number: 6865359-Tungaloy Manufacturer SKU: TUN6865359 Manufacturer article number: 6865359 Series: ISO turning inserts Application: Turning Material: Carbide Facts Size: 09 Thickness: 2.38 mm Corner radius: 0.2 mm Clearance angle: 11° Form angle: 60° Hole style: cylindrical hole + one-sided countersink (40°–60°) Special features PVD-coated carbide grade AH725 Single-sided chipbreaker Triangular plate shape With hole for standard clamping Compatible with external holders and boring bars Designed for steel and rostfreier Stahl FAQ What materials is this insert suitable for? The TPMT090202 AH725 insert from Tungaloy is specified for machining steel and rostfreier Stahl, offering reliable chip control and edge stability across those materials. Which holder types are compatible with this ISO insert? Compatibility depends on form, clearance angle, tolerance class, fastening and size; the TPMT090202 fits standard ISO triangular holders and boring bars designed for ISO 09 plates. How does the AH725 grade affect tool life? The PVD-coated AH725 grade enhances wear resistance and edge stability, typically extending in-process life and supporting reproducible results in mixed-material production. Can this insert be used for both external and internal turning? Yes, the geometry and mounting hole with countersink make the insert suitable for both external and internal turning when paired with the appropriate holder. What chip control can be expected from the single-sided chipbreaker? The single-sided chipbreaker promotes controlled chip formation under common turning conditions, improving swarf evacuation and lowering chip-related interruptions. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 090202 AT9530 Wendeplatten - Tungaloy
Take advantage of a high‑quality AT9530 cermet grade and precise geometry for superior surface finish and consistent wear; the insert’s 0.2 mm corner radius and ISO compatibility support reliable finishing and light turning of steel. Order via Metav Werkzeuge or consult the Metav team for application advice. TPMT090202 AT9530 ISO turning insert — 60° triangular, cermet grade (Tungaloy) A TPMT090202 AT9530 ISO turning insert designed for finishing and light turning of steel, offering refined surface quality and predictable tool life. High-grade AT9530 cermet for superior finish ISO-compatible TPMT triangular shape, 60° angle 0.2 mm corner radius for fine turning operations One-sided chipbreaker with centre hole fitment Improved surface quality and predictable wear for finishing The AT9530 composition is a coated cermet developed for finishing and light machining of steel, prioritising a consistent surface finish and even wear behaviour. With a 0.2 mm corner radius and a 60° insert geometry, this grade reduces the risk of built-up edge and supports stable cutting conditions at finishing feeds. The choice of a cermet compound provides a balance between hardness and toughness, which helps to maintain edge integrity during intermittent cuts and to deliver repeatable dimensional results. These properties make the insert particularly suitable where surface integrity and reduced polishing are decisive. Secure clamping and ISO compatibility for predictable setups Compatibility with clamping systems follows ISO standards; fitment depends on insert form, relief angle, tolerance class, fastening method, size and thickness. The triangular shape and ISO designation ensure broad compatibility with standard holders and boring bars intended for TPMT formats. The insert is supplied with a cylindrical hole and a single‑side countersink (40°–60°), enabling consistent seating and straightforward replacement during production. The nominal thickness of 2.38 mm contributes to stable clamping and predictable stiffness in light turning applications, which supports process reliability on flexible machinery and automatic tool changers. Material and geometry that extend operating windows Made from cemented carbide, the insert benefits from a substrate designed for dimensional stability under thermal load. The AT9530 coating and structure aim to keep flank wear uniform, extending the useful life of the cutting edge in finishing cycles. The one‑sided chipbreaker is optimised for chip control during finish passes, reducing risk of surface damage and easing swarf evacuation. Together, the substrate, coating and geometry widen the effective operating window by allowing slightly higher cutting speeds compared with uncoated grades, while retaining the fine edge necessary for high‑quality surface outputs. Practical application advice and selection guidance When specifying an insert for fine turning, match the AT9530 grade to steels where surface finish and low wear are priorities rather than aggressive material removal. The triangular TPMT form supports multiple indexing positions, improving economy for finishing tasks. For roughing or heavy interrupted cuts, select a tougher grade or a larger corner radius; for delicate contours or close tolerances the 0.2 mm corner radius delivers the controlled engagement required. For questions about exact holder compatibility, insert stacking or recommended cutting data, Metav Werkzeuge can provide tailored guidance and cutting recommendations. For precision finishing with Tungaloy’s AT9530 grade, consult Metav Werkzeuge for application support and reliable supply — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitability and delivery options. Technical data Article number: 6773746 SKU: 6773746-Tungaloy Manufacturer SKU: TUN6773746 Model series: ISO turning inserts Material: cemented carbide Core specifications Insert designation: TPMT090202 (090202) Size: 09 Thickness: 2.38 mm Corner radius: 0.2 mm Relief angle: 11° Insert angle: 60° Hole: cylindrical with single‑side countersink (40°–60°) Features & compatibility Grade: AT9530 (cermet) Application: finishing and light turning of steel Chipbreaker: one‑sided Insert shape: triangular (TPMT) Compatibility: ISO standard holders (form, relief angle, tolerance class, fastening, size, thickness) FAQ Is this insert suitable for finishing steel? Yes. The TPMT090202 AT9530 insert is formulated for finishing and light machining of steel, emphasising surface quality and uniform wear. Which holders accept this TPMT insert? Compatibility is determined by ISO form, relief angle (11°), tolerance class, fastening type, size and thickness; the TPMT shape fits holders designed for the TPMT090202 format. What is the corner radius and why does it matter? The corner radius is 0.2 mm; a smaller radius reduces cutting forces and supports finer surface finishes during finishing passes. Does the insert have a mounting hole and seating feature? Yes. The insert is supplied with a cylindrical hole and a single‑side countersink (40°–60°) for reliable seating and clamping. Is this grade recommended for roughing or heavy interrupted cuts? No. The AT9530 cermet grade is optimised for finishing and light turning; for heavy roughing, a tougher or specially designated roughing grade should be chosen. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 090202 GH730 Wendeplatten - Tungaloy
Take advantage of high edge stability and balanced wear resistance combined with simple ISO compatibility for efficient turning operations; order genuine Tungaloy inserts directly via Metav Werkzeuge or consult the specialists for matching holder and chipbreaker choices. TPMT090202 GH730 turning indexable insert by Tungaloy — triangular 60° geometry A TPMT090202 GH730 insert engineered for ISO-compliant turning, offering a compact 0.2 mm corner radius and a carbide substrate that supports stable cutting edges in a broad range of turning tasks. ISO triangular indexable insert Grade GH730 for wear resistance 0.2 mm corner radius, 60° geometry With central hole and 40°–60° countersink Consistent production through a wear‑balanced grade The GH730 grade is formulated to balance wear resistance, toughness and cutting‑edge stability, which translates into predictable tool life and fewer unplanned tool changes during turning. In practice, this balance reduces downtime and contributes to stable component quality over long runs. The carbide substrate and the grade’s wear characteristics mean the insert tolerates interrupted cuts and variable engagement, while the small 0.2 mm radius supports fine surface finish where low‑radius inserts are required. This combination is particularly suitable when repeatability and consistent surface quality are priorities. Simple integration into ISO tool systems As an ISO‑standard triangular insert, compatibility is defined by form, clearance angle, tolerance class, fastening method, size and thickness. The 11° clearance angle and the 60° seat geometry ensure correct seating in standard triangular holders, while the central hole with a cylindrical bore and one‑side countersink (40°–60°) enables secure clamping with common screw systems and clamping sets. The system approach—insert, matching external holder or boring bar, shim/clamp and replaceable fasteners—makes retrofitting and inventory management straightforward for production shops aiming to standardise tooling. Practical benefits for process reliability and surface quality The combination of grade and geometry delivers two clear benefits: extended service life under varied cutting conditions and improved edge integrity during higher mechanical loading. The 0.2 mm corner radius helps achieve finer surface finishes on external and internal turning, while the single‑sided chipbreaker must be matched to workpiece material and cutting parameters to control chip flow and avoid chip re‑cutting. Selecting the correct chipbreaker and the GH730 grade reduces flank wear and maintains dimensional accuracy, which supports higher first‑pass yields and lower rework rates. Mounting, handling and economical tool use With a plate thickness of 2.38 mm and a size designation of 09, the insert is compact yet robust for common turning tasks. The triangular form and the central hole design simplify indexation and secure clamping, enabling quick insert changes and minimal setup time. Proven grade characteristics mean fewer indexations per component produced, which reduces tooling cost per part and enhances overall process economy. Traceability is supported by the manufacturer article number and the supplier SKU for stock management and reordering. Contact Metav Werkzeuge for application matching or to request genuine Tungaloy TPMT090202 GH730 turning inserts; phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: 6821007 Manufacturer SKU: TUN6821007 Supplier SKU: 6821007-Tungaloy Model series: ISO-Drehwendeschneidplatten Article name: TPMT090202 GH730 Tungaloy insert Facts Geometry angle: 60° Corner radius: 0.2 mm Clearance angle: 11° Plate thickness: 2.38 mm Size: 09 Special features Material: carbide Grade: GH730 (Tungaloy) Plate shape: triangular Chipbreaker: single-sided Hole style: cylindrical hole with one-side countersink (40°–60°) Application: turning (external and internal) FAQ What is the GH730 grade designed for? The GH730 grade is a Tungaloy carbide formulation that balances wear resistance, toughness and cutting‑edge stability to support reliable turning performance under varying conditions. Which operations suit this insert best? The TPMT090202 GH730 insert is intended for turning, including external and internal turning, where a small corner radius and stable edge life are required. How does the insert fasten to the holder? The TPMT090202 GH730 insert features a central cylindrical hole with a one‑side countersink (40°–60°) that enables screw clamping into compatible triangular holders or boring bars. What surface finish can be expected with a 0.2 mm radius? A 0.2 mm corner radius on the TPMT090202 GH730 promotes finer surface finishes on turned parts and is suitable for finishing and semi‑finishing operations when combined with an appropriate chipbreaker. Which details are important for holder compatibility? Compatibility depends on the insert’s form, 11° clearance angle, tolerance class, fastening type, size (09) and thickness (2.38 mm); ensure the holder matches these parameters for secure seating. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 090202 GT9530 Wendeplatten - Tungaloy
Take advantage of a wear‑resistant coated cermet grade and a fine 0.2 mm corner radius for reliable finish turning; the insert’s ISO geometry and secure hole design ensure stable clamping and repeatable results. Order directly via Metav Werkzeuge or consult our specialists for application selection. TPMT 090202 GT9530 — Turning insert (ISO) by Tungaloy A TPMT090202 GT9530 triangular ISO turning insert designed for finishing and light universal turning of steel under stable machining conditions ISO triangular insert TPMT090202 Coated cermet grade GT9530 0.2 mm corner radius for fine finish Cylindrical hole with 40°–60° countersink Consistent surface quality and extended tool life The coated cermet composition of this insert is developed for finish-to-light general-purpose turning of steel, delivering a superior surface finish where stability is maintained. Cermet combines ceramic hardness with metallic toughness, which reduces the tendency for built-up edge and supports longer intervals between indexings. In practice, this means quieter cutting, more predictable wear behaviour and consistent component quality in batch production or small-series runs. Secure clamping and predictable geometry for repeatability The insert’s ISO triangular geometry with a 60° included angle and a 0.2 mm radius gives precise edge definition for controlled material removal. Fixing is via a cylindrical hole with single‑side countersink (40°–60°), providing a reliable seating in compatible holders; compatibility is determined by the insert’s form, 11° rake, tolerance class, fastening method, size and thickness. These defined parameters facilitate straightforward toolholder selection and ensure reproducible clamping for automated or manual setups. Suitable applications and practical machining advice Engineered primarily for steel turning, the grade GT9530 performs best in stable machining where finishing quality and extended tool life are priorities. The insert is appropriate for both external and internal turning operations; selecting a matching single‑side chipbreaker and adapting feed rates for the 0.2 mm corner radius will optimise surface quality. For interrupted cuts or highly unstable setups, consider alternative grades or heavier chipbreakers to maintain process security. Efficient production through predictable performance Adopting inserts with consistent grade characteristics and standardised ISO geometry improves shop-floor productivity by reducing setup time and variance between tool changes. The combination of coated cermet metallurgy, standardised ISO dimensions and a secure hole/countersink arrangement supports stable cutting parameters and lowers scrap risk. For customers seeking a dependable finishing solution, this insert contributes to a cost-effective, repeatable manufacturing process. Contact Metav Werkzeuge for tailored advice on integrating the Tungaloy TPMT090202 GT9530 insert into production workflows and to request exact availability and technical support Technical data Article number: 6998366 Manufacturer SKU: TUN6998366 SKU: 6998366-Tungaloy Brand: Tungaloy Designation: TPMT090202 GT9530 Tungaloy insert Model series: ISO turning inserts Material: cemented carbide / coated cermet Facts Included angle: 60° Rake (relief) angle: 11° Corner radius: 0.2 mm Plate thickness: 2.38 mm Size: 09 Special features Triangular plate form Single-sided chipbreaker Cylindrical hole with one‑side countersink (40°–60°) Coated cermet grade GT9530 ISO‑standard turning insert Intended for finishing and light universal turning of steel FAQ Which materials is this insert suitable for? The TPMT090202 GT9530 insert is formulated for turning steel, offering a wear‑resistant, finish‑oriented performance under stable cutting conditions. What are the key geometric specifications to check for toolholder compatibility? Compatibility depends on the insert’s shape, 11° rake, tolerance class, fastening style, size (09) and thickness (2.38 mm); the TPMT090202 format must match the holder’s pocket and clamping system. What cutting edge radius and applications are recommended? With a 0.2 mm corner radius, this insert is best for finishing and light universal operations where a fine surface quality is required. How is the insert secured in the holder? The insert uses a cylindrical hole with a single‑side countersink (40°–60°) for positive seating and consistent clamping forces. Can the insert be used for internal turning? Yes, the ISO triangular format and single‑side chipbreaker make the insert suitable for both external and internal turning when the holder geometry permits. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 090202 NS9530 PS Wendeplatten - Tungaloy
Achieve consistent finishing and stable chip control with the uncoated NS9530 cermet grade and a precise 0.2 mm corner radius; the ISO triangular format ensures straightforward compatibility with standard holders. Order directly via Metav Werkzeuge or consult our technical advisors for the optimal chipbreaker and holder match. TPMT 090202 NS9530 — ISO turning insert (uncoated cermet, 0.2 mm radius) — Tungaloy A compact triangular ISO insert, TPMT 090202 NS9530 is designed for precision external and internal turning where low cutting forces and superior surface finish are required ISO triangular insert, 60° included angle Uncoated cermet NS9530 for fine finishing 0.2 mm corner radius for accurate profiles Cylindrical hole with countersink for secure fastening Reliable surface finish through a specialised cermet grade The TPMT090202-PS NS9530 insert combines an uncoated cermet cutting material with a sharp edge geometry to deliver low cutting forces and a consistently high surface finish on steel. Cermet grades are engineered to maintain edge integrity during continuous cutting, which reduces vibration and limits built-up edge; the result is fewer reworks and more stable part quality. The triangular shape with a 60° included angle, paired with a 0.2 mm corner radius, supports precise profile control in finishing passes while the 11° relief angle helps to reduce rubbing and heat at the cutting edge. Predictable performance and secure mounting for production environments Designed to ISO standards, the insert offers straightforward ISO compatibility with a wide range of external holders and boring bars. The central cylindrical hole with a one-sided countersink (40°–60°) enables secure clamping and repeatable seat positioning, supporting quick index changes and minimal setup time. The PS chipbreaker geometry is matched to the grade for stable chip formation when machining steel with small depths of cut; this improves process reliability and contributes to longer effective tool life in high-volume or batch production. Practical selection advice for turning applications This insert is optimised for finishing operations on steel where continuous cuts and fine tolerances are required. Select the PS chipbreaker and NS9530 grade when the priority is a mirror-like surface with low cutting forces; choose a holder with the correct form, free angle and tolerance class to ensure seating accuracy. For additional technical data or help matching the insert to a specific holder or machining parameter, the Metav Werkzeuge team can supply cutting data sheets and compatibility guidance — email info@metav-werkzeuge.com or call +49 2822 7131930 for tailored advice. For precision finishing with Tungaloy’s NS9530-grade triangular inserts, contact Metav Werkzeuge for stock information and application advice — our consultants will recommend the optimal chipbreaker and holder compatibility. Technical Data Article number: 6998542 SKU: 6998542-Tungaloy Manufacturer SKU: TUN6998542 Model series: ISO-Drehwendeschneidplatten Designation: TPMT090202-PS NS9530 Facts Thickness: 2.38 mm Corner radius: 0.2 mm Relief angle: 11° Included angle: 60° Size: 09 Special features Cutting material: uncoated cermet NS9530 Substrate: cemented carbide Chipbreaker: PS Hole: cylindrical + one-sided countersink (40°–60°) Plate form: triangular Application: external and internal turning; finishing cuts on steel Compatibility: ISO holders determined by form, relief angle, tolerance class, clamping, size and thickness FAQ What materials is this insert best suited for? The TPMT090202-PS NS9530 insert is optimised for finishing on steel; the NS9530 cermet grade gives a sharp cutting edge and low cutting forces suitable for continuous cuts and fine surface requirements. Can this insert be used for internal turning as well as external turning? Yes, the triangular ISO format and central hole allow use in both external holders and boring bars for internal turning, provided the holder matches the required form, relief angle and tolerance class. How does the PS chipbreaker affect machining? The PS chipbreaker is designed to promote stable chip formation for finishing operations on steel, reducing the risk of built-up edge and supporting consistent surface quality when using the NS9530 grade. What seating and clamping features ensure repeatability? The insert features a cylindrical hole with a one-sided countersink (40°–60°) that provides secure fastening and repeatable seating when used with the correct ISO clamp and underlay components. Which product identifiers should be quoted when ordering? Please reference the designation TPMT090202-PS NS9530, article number 6998542 and SKU 6998542-Tungaloy when enquiring or ordering. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 090202 NS9530 Wendeplatten - Tungaloy
Data inconsistency: the product is described both as "Hartmetall" (cemented carbide) and as an uncoated cermet; please verify the source data before a product description can be produced, as this discrepancy may lead to confusion regarding the material composition, properties, and intended applications, which are critical for accurate classification, marketing, and usage; ensuring clarity in the description is essential to avoid potential misunderstandings or errors in communication, especially when dealing with technical specifications that require precise terminology, and it is recommended to cross-check the original documentation or consult with the relevant experts to confirm whether the material is indeed cemented carbide, an uncoated cermet, or a different composition entirely.
TPMT 090202 NS9530 Wendeplatten - Tungaloy
Take advantage of the combination of NS9530 uncoated cermet for superior surface finish, a 0.2 mm corner radius for fine finishing and ISO compatibility for reliable clamping; order the insert directly via Metav Werkzeuge or ask our consultants for application support. TPMT090202 NS9530 triangular turning insert — finishing insert for turning, Tungaloy TPMT090202 NS9530 is an ISO-format triangular turning insert designed for finish turning of steel, offering a sharp cutting edge, low cutting forces and stable surface quality ISO triangular insert TPMT design Uncoated cermet for high surface finish Sharp cutting edge for low cutting forces 0.2 mm corner radius for fine finishing Optimised finishing performance for steel components The uncoated cermet grade NS9530 is engineered for finishing applications on steel where a high surface finish and low cutting forces are decisive. The fine, sharp cutting edge reduces ploughing and produces consistent surface integrity during continuous cuts and small depths of cut. For production environments this translates into predictable part quality, fewer rework cycles and reduced secondary operations. The term cermet denotes a ceramic–metal composite that combines the hardness and heat resistance of ceramics with the toughness of metals; in practice this means superior edge retention and a crisp cutting profile suited to light, precise passes. Secure clamping and ISO compatibility to keep processes running The insert conforms to ISO geometry and is compatible with standard holders when matched by form, clearance angle, tolerance class, fastening method, size and thickness. The cylindrical hole with one-sided countersink (40°–60°) enables secure screw clamping and repeatable seating, which reduces index time and ensures consistent cutting position after each index. Specifying ISO-conformant parts simplifies inventory and holder selection, so line-side tool changes are faster and tool life is easier to predict. Clear identification of holder compatibility helps avoid downtime caused by incorrect seating or mismatch. Predictable machining behaviour for efficient production With a 0.2 mm corner radius, 11° clearance angle and a 60° triangular form, the insert is tailored for fine finishing passes that demand dimensional control and a smooth surface texture. The single-sided chipbreaker and the thin 2.38 mm plate thickness support low cutting forces and stable chip flow during finish operations, reducing chatter and improving reproducibility. These measurable attributes—edge geometry, clearance angle and chip control—deliver a rational efficiency argument: more parts within tolerance per shift and a reduction in unscheduled tool changes. The use of an ISO-format triangular insert also provides up to three indexing positions, improving effective cutting edge economy. For a precise finishing solution from Tungaloy, contact Metav Werkzeuge for technical advice or to request this TPMT090202 NS9530 insert (SKU 6998631-Tungaloy); email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 6998631-Tungaloy Manufacturer SKU: TUN6998631 Manufacturer article number: 6998631 Designation: TPMT090202 NS9530 Numbers / Core technical data Corner radius: 0.2 mm Thickness: 2.38 mm Clearance angle: 11° Included angle: 60° Size: 09 Designs / Special features Grade: NS9530 (uncoated cermet) Chipbreaker: single-sided Hole style: cylindrical hole + one-sided countersink (40°–60°) Plate form: triangular (TPMT) Application: finishing turning on steel Model series: ISO turning inserts Compatibility determined by form, clearance, tolerance class, fastening, size and thickness FAQ What materials is this insert intended for? The TPMT090202 NS9530 insert is specified for finishing on steel; its uncoated cermet composition is optimised for low cutting forces and high surface quality when turning steel. How does the 0.2 mm corner radius affect finish and tolerances? A 0.2 mm corner radius provides a fine cutting edge that improves surface finish and dimensional control during finishing passes with small depths of cut using the TPMT090202 NS9530 turning insert. Is the insert compatible with standard ISO holders? Yes, the ISO-format TPMT090202 is compatible with holders that match the insert form, clearance angle, tolerance class, fastening method, size and thickness; the cylindrical hole with one-sided countersink ensures secure clamping. How many effective cutting edges are available per insert? The triangular form offers up to three indexable cutting positions, giving multiple effective edges per TPMT090202 NS9530 insert and improving edge economy. What are the distinguishing features of the NS9530 grade? NS9530 is an uncoated cermet grade designed for finishing: it provides a sharp cutting edge, stable chip formation and consistent surface quality for continuous cutting operations. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 090202 T6215 Wendeplatten - Tungaloy
Take advantage of the combination of a CVD-coated carbide grade T6215, a PS chipbreaker and a compact triangular ISO format for efficient turning of stainless steels; order via Metav Werkzeuge or consult our specialists for application support. TPMT090202-PS T6215 — TPMT 090202 turning insert, CVD-coated carbide (Tungaloy) TPMT090202-PS T6215 is a triangular ISO turning insert engineered for stable to lightly interrupted turning of stainless steels in external and internal operations. CVD-coated carbide T6215 grade for wear resistance Optimised for turning of stainless steels PS chipbreaker for controlled chips Triangular 09 format, 60° geometry 0.2 mm corner radius for fine details Higher process stability through a wear-resistant grade The use of a CVD-coated carbide T6215 grade delivers a robust balance of wear resistance and toughness, making the insert well suited for stainless steels under stable to lightly interrupted conditions. The coating reduces flank wear and extends edge life, which translates into fewer tool changes and improved throughput. For precision turning applications, this means more consistent part quality and lower overall machining costs while maintaining stable cutting parameters. Precise geometry for secure clamping and repeatability Designed as an ISO triangular 09 insert with a 60° cutting angle and 11° clearance, the geometry ensures reliable seating in standard holders and consistent cutting engagement. The insert’s 2.38 mm thickness and cylindrical hole with a one-sided countersink (40°–60°) enable secure clamping and straightforward index changes. This compatibility reduces setup time and minimises the risk of mounting errors, supporting repeatable production runs and predictable tool performance. Controlled chip formation and improved surface finish The integrated PS chipbreaker has been developed for effective chip control when machining more adhesive materials like stainless steels; the result is manageable chips that protect the tool and workpiece. A 0.2 mm corner radius contributes to a good surface finish without sacrificing edge strength for light finishing passes. These design choices lower the incidence of rework and can improve downstream productivity by reducing manual finishing operations. Practical system integration and application guidance The insert is part of the ISO turning insert system and is intended to be used with matching external holders, boring bars, appropriate shim/clamp sets and replacement screws. Selection of the correct chipbreaker and grade should be matched to workpiece material, machining parameters and stability of the setup. For typical external turning and internal boring, the combination of the PS breaker and the T6215 grade supports a balance between tool life and surface integrity, helping to meet production targets with predictable costs. For tailored application advice or to procure the TPMT090202-PS T6215 from Metav Werkzeuge, please contact our specialists at Metav Werkzeuge by email at info@metav-werkzeuge.com or by telephone on +49 2822 7131930 — assistance is available for grade selection and tool holder compatibility. Technical Data Article number: 6876872 Manufacturer SKU: TUN6876872 Label: TPMT090202-PS T6215 Model series: ISO-Drehwendeschneidplatten Application: Turning Facts Corner radius: 0.2 mm Included angle: 60° Clearance angle: 11° Plate thickness: 2.38 mm Plate size: 09 Special features Material: carbide Coating: CVD Grade: T6215 Chipbreaker: PS Hole: cylindrical hole + one-sided countersink (40°–60°) Shape: triangular Intended use: external and internal turning of stainless steels Compatible with ISO holders (form, clearance, tolerance, fixation, size and thickness determine fit) FAQ What materials is this insert designed for? The TPMT090202-PS T6215 is formulated for machining stainless steels and performs reliably under stable to lightly interrupted turning conditions. Which chipbreaker is fitted and what benefit does it provide? The insert features a PS chipbreaker, which promotes short, controllable chips and helps maintain a secure cutting zone for improved surface quality. How does the T6215 grade affect tool life? The CVD-coated T6215 grade enhances wear resistance and extends edge life during continuous turning, contributing to fewer index changes and higher uptime. Is the insert compatible with standard ISO tool holders? Yes, the triangular ISO 09 format and the specified hole/countersink arrangement ensure compatibility with ISO-standard holders when form, clearance, tolerance class, fixation, size and thickness are correctly matched. What is the exact article identifier for ordering? Order as article number 6876872 or manufacturer SKU TUN6876872; the product is supplied as TPMT090202-PS T6215 by Tungaloy. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 090202 T9215 Wendeplatten - Tungaloy
Take advantage of the combination of high wear resistance, stable edge security and an ISO‑compliant geometry for reliable, productive turning operations; order via Metav Werkzeuge or contact our consultants for machining advice. TPMT 090202 T9215 — Turning insert, CVD‑coated carbide (Tungaloy) TPMT090202-PS T9215 is an ISO‑standard triangular turning insert designed for medium steel machining and for use in external and internal turning applications CVD‑coated carbide grade T9215 Optimised for medium steel productivity Triangular 09 insert, 60° included angle PS chipbreaker for continuous to light interruptions High productivity through wear‑resistant grade and coating The TPMT090202-PS T9215 insert combines a CVD‑coated carbide substrate with a cutting geometry tuned for stable material removal, delivering improved wear resistance and consistent performance in medium steel. The CVD coating forms a durable barrier that reduces flank wear at elevated temperatures and extends the interval between indexings. For shops running long production cycles, this leads to measurable gains in productivity and reduced process variability. Where slight interruptions occur, the grade still provides edge security and predictable tool life. Precise geometry and secure clamping for repeatable results Made in the ISO‑standard series, the insert is a triangular 09 size with a 60° included angle, a 0.2 mm corner radius and an 11° clearance. The plate is supplied with a hole featuring a cylindrical bore plus a single‑side countersink (40°–60°), ensuring secure clamping in compatible holders. These geometric details enable multiple economical cutting edges per insert, while the defined tolerances help maintain concentricity and surface finish. Compatibility with a given toolholder must be confirmed by matching form, clearance, tolerance class, fastening method, size and thickness. Chip control and application guidance for reliable turning The integrated PS chipbreaker promotes controlled, narrow chips in continuous to lightly interrupted cuts, improving surface quality and evacuation in long cuts. This makes the insert particularly suitable for external and internal turning where chip control and consistent finishes are priorities. Selection of the chipbreaker and grade should follow the stability of the workpiece setup and the intended cutting parameters; more rigid setups can fully exploit the T9215 grade for extended tool life. For mixed operations or unfamiliar materials, consult machining data or ask for advice to align feed and speed with the insert’s capabilities. Contact Metav Werkzeuge for tailored machining recommendations on Tungaloy inserts or to request specific cutting data; Metav Werkzeuge can advise on holder compatibility and optimal chipbreaker choice by email or phone Technical Data Article number: 6774069 Manufacturer SKU: TUN6774069 SKU: 6774069-Tungaloy Material: Cemented carbide Grade: T9215 Coating: CVD‑coated Shape: Triangular (09) Chipbreaker: PS Manufacturer designation: TPMT090202-PS Facts Corner radius: 0.2 mm Thickness: 2.38 mm Included angle: 60° Clearance angle: 11° Hole: With hole (cylindrical + one‑side countersink 40°–60°) Special features ISO‑normed turning insert For external and internal turning Suited to medium steel machining Stable edge for continuous to slight interruptions Multiple cutting edges per insert for economy FAQ What workpiece materials is this insert best suited to? The TPMT090202-PS T9215 insert is optimised for medium steel; the CVD coating and grade deliver high wear resistance and stable cutting for steel turning applications. How does the PS chipbreaker affect performance? The PS chipbreaker promotes narrow, controlled chips in continuous and lightly interrupted cuts, improving surface finish and chip evacuation when using this indexable insert. Which holders are compatible with this ISO insert? Compatibility depends on holder form, clearance, tolerance class, fastening type, size and thickness; match the insert geometry (triangular 09, 60°) to the holder specifications for secure clamping. Can this insert be used for internal turning? Yes, the insert is suitable for both external and internal turning operations when mounted in an appropriate toolholder designed for triangular ISO inserts. How many cutting edges are available per insert? The triangular 09 geometry provides multiple indexable cutting edges; the exact count depends on how the insert is indexed and the applied cutting edge usage. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 090202 T9225 Wendeplatten - Tungaloy
Benefit from a combination of CVD-coated carbide toughness, precise geometry and secure central clamping for consistent chip control and reliable performance in medium-to-heavy steel turning. Order genuine Tungaloy inserts via Metav Werkzeuge or consult our technical team for holder compatibility and application advice. TPMT 090202 T9225 triangle indexable insert — CVD-coated carbide, 11° clearance (Tungaloy) TPMT090202 T9225 is an ISO‑compliant triangular insert designed for external and internal turning; a robust universal grade for medium to heavy steel machining. CVD-coated carbide for robust performance T9225 grade for medium to heavy steel machining 60° triangular form with 0.2 mm corner radius Central hole with cylindrical bore and countersink Reliable cutting performance for variable engagement The CVD-coated carbide substrate and the T9225 robust universal grade deliver a good balance of toughness and wear resistance, especially where cutting conditions vary or cuts are slightly interrupted. This composition reduces the risk of chipping under moderate impact while maintaining an economically attractive tool life. The result is more predictable tool change intervals and stable surface finish during continuous turning operations on steel workpieces. Precision geometry to secure clamping and consistent chip formation A defined 11° clearance and the 60° triangular form ensure reproducible contact with standard ISO triangular tool holders, while the 0.2 mm corner radius provides controlled edge strength for finishing and light roughing passes. The insert features a central hole with a cylindrical bore and a one‑sided countersink (40°–60°), enabling positive clamping and minimising insert movement under load. These geometric cues help to maintain cutting consistency across batches and simplify insert indexing. System-level reliability for productive turning processes As part of an ISO indexable insert system, the plate integrates with matching holders, underplates and screws to create a secure cutting assembly. The single‑sided chipbreaker is optimised for common steel machining tasks, supporting efficient chip control and evacuation. Selection of the correct holder and clamping torque is essential to exploit the grade’s advantages; the insert’s universal character keeps inventory lean while supporting a range of turning operations from finishing to heavier cuts. For demanding steel turning where repeatability and controlled chip formation matter, contact Metav Werkzeuge to order genuine Tungaloy TPMT090202 T9225 inserts and to confirm holder compatibility or cutting-data recommendations. Technical data Article number: 6781058 Product SKU: 6781058-Tungaloy Manufacturer SKU: TUN6781058 Designation: TPMT090202 ISO code: 090202 Numbers / Core technical data Corner radius: 0.2 mm Thickness: 2.38 mm Clearance angle: 11° Included angle: 60° Size: 09 Model series: ISO indexable turning inserts Designs / Special features Shape: triangular Hole: with central hole Hole style: cylindrical bore + one‑sided countersink (40°–60°) Chipbreaker: one‑sided Grade: T9225 Material: carbide Coating: CVD‑coated FAQ What workpieces is this insert best suited for? The TPMT090202 T9225 insert is designed primarily for medium to heavy machining of steel; the T9225 grade provides toughness for variable engagement and interrupted cuts. Which holder types are compatible with this triangular plate? Compatibility depends on holder form, relief angle, tolerance class, clamping method, size and thickness; the TPMT090202 fits ISO triangular holders with matching mounting geometry. How does the central hole and countersink affect clamping? The central hole with cylindrical bore and one‑sided countersink (40°–60°) enables secure, repeatable clamping and helps to prevent insert rotation during turning operations. Is the chipbreaker suitable for finishing passes? The one‑sided chipbreaker is optimised for steel turning and supports both finishing and medium roughing when combined with appropriate feeds and speeds. Can the same insert be used for internal and external turning? Yes; the ISO triangular form and universal T9225 grade allow the insert to be used for both internal and external turning, subject to toolholder and machine setup. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 090204 AH6225 Wendeplatten - Tungaloy
Benefit from the blend of a PVD-coated AH6225 grade, a precise 60° triangular geometry, and secure seating for consistent turning results; order directly via Metav Werkzeuge or consult the technical advisers for holder compatibility and process optimisation. TPMT090204 AH6225 Tungaloy insert — ISO triangular turning insert for turning TPMT090204 AH6225 Tungaloy insert designed as an ISO-standard triangular turning insert for external and internal turning of stainless steels, offering a sharp yet stable cutting edge for medium machining conditions ISO triangular insert, 60° cutting angle PVD-coated carbide AH6225 for stainless steels 11° clearance and 0.4 mm corner radius Cylindrical hole with single-sided countersink Engineered for consistent metal removal and predictable tool life The PVD-coated AH6225 grade provides a well-balanced combination of edge sharpness and stability, specifically formulated for stainless steels under varying cutting conditions. As an ISO-series insert, its geometry and tolerance range deliver predictable seating and repeatable performance when paired with a compatible holder. The proven substrate and coating support stable chip formation and reduced flank wear during medium cutting operations, which in turn helps to maintain component quality and minimise unscheduled tool changes. Precision geometry and secure clamping reduce vibration and improve surface finish A triangular plate with a 60° cutting angle and a 0.4 mm corner radius gives a good compromise between strength and finish. The 11° clearance angle and a plate thickness of 2.38 mm ensure stable support in the pocket, while the cylindrical hole with a single-sided countersink (40°–60°) provides reliable mechanical clamping and repeatable positioning. These geometric details, combined with a one-sided chipbreaker, contribute to steady cutting forces, improved surface quality and reduced tendency for chatter in both external and internal turning tasks. Proven coating and grade for productive machining and process security The combination of a PVD coating on a hardmetal substrate yields extended edge life and consistent wear behaviour, especially when machining rostfreie Stähle. The AH6225 grade is a universal choice for a variety of stainless steel alloys, designed to keep a sharp cutting edge while resisting abrasion and built-up edge under changing conditions. Selecting the correct chipbreaker and matching the insert to the workpiece stability and feed strategy enables cost-effective production with fewer tool changes and predictable component tolerances. The ISO-system approach also simplifies inventory management and reduces setup risk. Practical system considerations and compatibility guidance Compatibility with the clamping system is defined by the insert form, clearance angle, tolerance class, fixation method, size and thickness; the cutting system typically comprises the ISO insert, a matching external holder or boring bar, a shim/underplate and clamping screws. When integrating this insert into a process, ensure the holder pocket accepts an ISO triangular plate with the specified 090204 designation and that the selected clamping screws and shims match the insert's hole and countersink geometry. Proper seating and clamp torque are decisive for achieving repeatable cutting performance and safe operation. Contact Metav Werkzeuge for tailored advice on the TPMT090204 AH6225 Tungaloy insert, holder compatibility and process parameters; technical enquiries via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Item name: TPMT090204 AH6225 Tungaloy insert Manufacturer article number: 6831069 Manufacturer SKU: TUN6831069 Internal SKU: 6831069-Tungaloy Series: ISO turning inserts Application: Turning Core specifications Cutting angle: 60° Clearance angle: 11° Corner radius: 0.4 mm Plate thickness: 2.38 mm Plate size: 09 ISO code: 090204 Design and features Material: carbide Grade/coating: PVD-coated AH6225 Shape: triangular Chipbreaker: one-sided Hole: with cylindrical hole and single-sided countersink (40°–60°) System notes: compatibility depends on form, clearance, tolerance, fixation, size and thickness FAQ Which materials is this insert best suited for? This TPMT090204 AH6225 Tungaloy insert is primarily specified for machining stainless steels, offering a balance of edge sharpness and wear resistance suitable for medium cutting operations. How does the AH6225 grade behave under variable cutting conditions? The AH6225 grade on the TPMT090204 insert maintains a sharp, stable cutting edge and supports consistent chip formation across changing temperatures and feeds, improving process reliability. What pocket and clamping features are required for correct seating? A pocket that accepts ISO triangular inserts with the 090204 designation and a cylindrical hole with single-sided countersink is required; the TPMT090204 must be clamped securely to ensure repeatable positioning. Can this insert be used for both external and internal turning? Yes — the triangular geometry and the one-sided chipbreaker make the TPMT090204 AH6225 insert suitable for both external and internal turning, provided the holder and stability conditions match the machining task. What edge preparation is offered and which corner radius suits semi-finish work? The TPMT090204 is supplied with a 0.4 mm corner radius, which is appropriate for semi-finishing and provides a compromise between edge strength and surface quality. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 090204 AH6225 Wendeplatten - Tungaloy
Take advantage of the combination of a PVD-coated carbide grade that is optimised for rostfreier Stahl, the robust 60° triangular geometry and secure fastening via a cylindrical hole with countersink for steady production results — order directly via Metav Werkzeuge or consult our specialists for application guidance. TPMT 090204 AH6225 TPMT — Turning insert (ISO triangular, 60°) by Tungaloy A TPMT 090204 AH6225 indexable turning insert for ISO-compliant external and internal turning, designed for medium machining of rostfreier Stahl. PVD-coated carbide AH6225 Optimised for rostfreier Stahl 60° triangular insert geometry Cylindrical hole with single-side countersink High-performance grade for rostfreier Stahl with consistent edge stability The insert combines a PVD-coated carbide substrate with the universal AH6225 grade to deliver a balance of sharpness and edge strength suited to medium cutting conditions on rostfreier Stahl. The coating reduces built-up edge and improves wear resistance during interrupted cuts and variable conditions, while the carbide core maintains dimensional stability. This results in fewer tool changes and a more reliable cycle time for batch and single-piece production. Geometry and edge design that improve process security The 60° triangular form and a 0.4 mm corner radius provide a stable cutting edge for general turning tasks. The insert features a single-sided chipbreaker that is matched to the AH6225 grade to control chip formation and evacuation, reducing the risk of entanglement and improving surface finish. With an 11° relief angle, the geometry supports predictable cutting forces and repeatable tool performance across a range of feed and speed settings. Secure clamping and straightforward machine integration Designed as an ISO-format indexable insert, the item offers a cylindrical hole + single-side countersink (40°–60°) for positive location and reliable clamping in compatible holders. The 2.38 mm thickness and standard 09 size ensure mechanical stability during side forces typical of external turning. As part of a system consisting of the insert, matching external holder or boring bar, and clamping set, selection focuses on form, relief, tolerance class and size to guarantee compatibility and repeatable results. For tailored application advice or to obtain the Tungaloy TPMT 090204 AH6225 insert, contact Metav Werkzeuge — email info@metav-werkzeuge.com or call +49 2822 7131930 for prompt assistance Technical data Article number: 6829887 Manufacturer SKU: TUN6829887 Model series: ISO-Drehwendeschneidplatten Material: carbide Facts Insert angle: 60° Relief angle: 11° Thickness: 2.38 mm Corner radius: 0.4 mm Size: 09 Special features Coating: PVD Shape: triangular Hole style: cylindrical hole + single-side countersink (40°–60°) Chipbreaker: single-sided Application: turning (external and internal) Grade: AH6225, universal for rostfreier Stahl FAQ What materials is this insert best suited for? The TPMT 090204 AH6225 insert is formulated for machining rostfreier Stahl; the AH6225 grade and PVD coating provide wear resistance and a controlled cutting edge for that material family. How does the chipbreaker affect machining performance? The single-sided chipbreaker on this insert promotes consistent chip control and evacuation, which helps to maintain surface quality and reduce the likelihood of chip-related interruptions when using the Tungaloy TPMT 090204 AH6225 indexable insert. Is the insert compatible with standard ISO turning holders? Yes — the insert follows ISO geometry for triangular inserts and the cylindrical hole with countersink ensures secure clamping in compatible external holders and boring bars when the holder matches form, clearance angle, tolerance and size. What cutting edge features contribute to tool life? The combination of PVD-coated carbide, a stable 0.4 mm corner radius and a designed cutting edge in the AH6225 grade increases resistance to chipping and wear, resulting in improved tool life under medium turning conditions. Which part number should be used when ordering? Order using the article number 6829887 or manufacturer SKU TUN6829887 for the Tungaloy TPMT 090204 AH6225 insert Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 090204 AH6225 Wendeplatten - Tungaloy
Benefit from the combination of a PVD-coated AH6225 carbide grade and precise ISO form for consistent performance in stainless-steel turning; the result is stable chip control and reduced tool change frequency. Order the TPMT090204 AH6225 Tungaloy insert directly via Metav Werkzeuge or consult the company's advisers for technical matching to specific holders. TPMT090204 AH6225 Tungaloy insert — ISO triangular turning insert, PVD-coated carbide, 11° clearance A TPMT090204 AH6225 triangular turning insert designed for external and internal turning, optimised for stainless steels and medium cutting conditions PVD-coated carbide AH6225 for stainless steel ISO triangular insert, size 09, 2.38 mm thick Sharp yet stable cutting edge for medium cutting Cylindrical hole with 40°–60° countersink Consistent cutting performance and material suitability The insert delivers reliable machining when working with stainless steels, thanks to the PVD-coated surface and the AH6225 grade. The coating stabilises the cutting edge under fluctuating temperatures and varied cutting forces, while the carbide substrate supports repeatable performance. As a consequence, the component life becomes more predictable and the number of tool changes is reduced, supporting smoother production cycles and lower process interruptions. Easy integration into ISO tooling systems Designed to ISO dimensions, the insert offers quick interchangeability with matching turning holders and boring bars. The ISO conformity and triangular geometry (size 09) ensure straightforward replacement and alignment, while the 11° clearance promotes reliable chip flow and prevents rubbing. The cylindrical hole with one-sided countersink (40°–60°) secures the insert firmly in the clamp, reducing setup time and improving positional repeatability in batch production. Practical application tips for turning operations Suitable for both external and internal turning, the insert features a 0.4 mm corner radius and a 2.38 mm thickness that balance strength and finishing capability. The single-sided chipbreaker is tuned for medium cutting parameters, helping to form stable chips under typical lathe feeds and speeds. For unstable setups or interrupted cuts, selecting a holder with higher rigidity and adjusting cutting parameters will extend tool life and maintain surface quality. Operational advantages that support productivity Using this grade and form promotes greater productivity through steadier cutting behaviour and improved chip control, reducing downtime caused by tool failures. The insert’s combination of a sharp geometry and a robust substrate contributes to long-term process stability, while the universal AH6225 grade keeps stock handling simpler across mixed stainless-steel work. Overall, the solution is cost-effective for shops seeking dependable, repeatable turning performance. Contact Metav Werkzeuge for holder compatibility, batch availability and expert machining recommendations for the Tungaloy AH6225 turning inserts Technical Data Article number: 6831319 Manufacturer SKU: TUN6831319 Model series: ISO turning inserts Designation: TPMT090204 AH6225 Data Insert size: 09 Thickness: 2.38 mm Corner radius: 0.4 mm Clearance angle: 11° Included angle: 60° Hole/countersink: cylindrical hole + 40°–60° countersink Special features Material: carbide Coating/grade: AH6225 (PVD) Chipbreaker: one-sided Shape: triangular Application: external and internal turning Compatible with ISO turning holders Universal grade for stainless steels FAQ What materials is this insert best suited for? The TPMT090204 AH6225 insert is formulated primarily for stainless steels, offering a balance of sharpness and edge stability for medium cutting conditions. Will this insert fit existing ISO triangular holders? Yes. The TPMT090204 follows ISO dimensions and secures with a cylindrical hole and countersink, making it compatible with matching ISO triangular holders when the holder’s form and tolerance class correspond. What corner radius and thickness does the insert offer? This insert has a 0.4 mm corner radius and a 2.38 mm plate thickness, suitable for a mix of finishing and general turning tasks. How does the AH6225 grade affect chip formation? The AH6225 PVD-coated grade promotes stable chip formation under variable conditions, improving chip control and reducing the likelihood of built-up edge on stainless-steel workpieces. Is the insert single- or double-sided? The design is single-sided with a one-sided chipbreaker; the TPMT090204 AH6225 insert provides a defined cutting edge on its active side for targeted performance. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 090204 AH6235 Wendeplatten - Tungaloy
Take advantage of a combination of robust PVD-coated carbide, proven chip control for stainless steels, and ISO compatibility for reliable turning cycles — order via Metav Werkzeuge or contact our consultants for application support. TPMT 090204 AH6235 Turning Insert — PVD-coated, 0.4 mm Radius (Tungaloy) The TPMT090204 AH6235 is an ISO triangular turning insert optimised for external and internal turning, particularly effective for interrupted cuts and machining stainless steel. ISO triangular insert TPMT 090204 PVD-coated AH6235 for stainless steel 11° clearance and 0.4 mm corner radius Central hole with cylindrical + countersink Reliable edge performance for stainless machining The insert combines a PVD-coated surface with a cemented carbide substrate to deliver enhanced resistance to chipping when machining stainless steel. The AH6235 grade is formulated as a tougher cutting grade suited to interrupted cuts and unstable cutting conditions; this reduces unplanned edge failures and helps maintain consistent component tolerances. Selecting a tougher grade mitigates built-up edge and improves process stability during medium-duty turning operations. Precision geometry that ensures predictable results The ISO triangular insert geometry with a 60° included angle and a 0.4 mm corner radius provides a balanced compromise between edge strength and surface finish. The 11° clearance (frewinkel) helps to reduce rubbing and heat generation at the flank, while the 2.38 mm plate thickness contributes to mechanical rigidity in the toolholder. For practical planning, compatibility depends on holder form, relief angle, tolerance class, fastening and insert size/thickness — check these parameters to ensure correct seating and repeatable indexing. Practical chip control and secure mounting Equipped with a one-sided chipbreaker, this insert promotes controlled chip formation on materials prone to long, stringy swarf. The central mounting hole is a cylindrical bore with a single-sided countersink (40°–60°), allowing secure clamping in a range of ISO-compatible holders and boring bars. This secure fixing reduces chatter and supports higher process reliability, meaning fewer interruptions and lower scrap rates in production runs. For precise application advice or to request the Tungaloy TPMT090204 AH6235 insert, contact Metav Werkzeuge by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 for tailored recommendations and fast delivery. Technical data Article number: 6903502 SKU: 6903502-Tungaloy Manufacturer SKU: TUN6903502 Facts Insert designation: TPMT090204 Carbide grade: AH6235 (PVD-coated) Corner radius: 0.4 mm Relief/clearance angle: 11° Insert thickness: 2.38 mm Insert size: 09 Included angle: 60° Special features Geometry: triangular insert Chipbreaker: one-sided Hole style: cylindrical hole + single-sided countersink (40°–60°) Typical application: external and internal turning Model series: ISO turning inserts Material: cemented carbide FAQ Is this insert suitable for stainless steel machining? Yes. The AH6235 grade on the TPMT090204 insert is designed as a tougher, PVD-coated carbide for improved resistance to chipping when machining stainless steel. Can the insert be used for interrupted cuts? Yes. The toughness of the AH6235 grade makes the insert suitable for interrupted cuts and operations with elevated risk of edge breakout. What toolholders are compatible with this insert? Compatibility is determined by holder form, clearance angle, tolerance class, fastening method, insert size and thickness; the TPMT090204 fits ISO-compatible triangular holders with matching seating and clamping. What are the key geometry parameters to check before fitting the insert? Verify the 11° clearance, 60° included angle, 0.4 mm corner radius and the 2.38 mm plate thickness to ensure correct seating and expected cutting behaviour. Is the hole style compatible with standard clamping systems? The central cylindrical hole with single-sided countersink (40°–60°) provides a secure clamping solution for most ISO-style clamping systems. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 090204 AH6235 Wendeplatten - Tungaloy
Take advantage of the PVD‑coated AH6235 grade and the ISO‑standard triangular geometry for reliable machining in interrupted cuts and demanding rostfreier Stahl applications; order directly via Metav Werkzeuge or consult the team for tool selection and holder compatibility. TPMT090204 AH6235 TPMT indexable turning insert — PVD‑coated AH6235 grade for turning, 60° triangle, with hole The TPMT090204 AH6235 indexable insert is an ISO‑standard triangular turning insert designed for external and internal turning, optimised for rostfreier Stahl and applications with a higher risk of chipping. PVD‑coated AH6235 carbide grade Suited to rostfreier Stahl and interrupted cuts ISO triangular insert, 60° geometry 0.4 mm nose radius with one‑sided chipbreaker Higher process reliability in rostfreier Stahl turning The insert’s PVD‑coated AH6235 grade provides a tougher carbide substrate and a wear‑resistant coating that together improve resistance to chipping during interrupted cuts. This combination results in more consistent cutting performance when machining rostfreier Stahl, where built‑up edge and material stickiness often threaten surface quality. The tougher grade reduces unexpected edge loss and helps to maintain stable chip formation, leading to fewer unscheduled tool changes and improved overall throughput. Fast integration into ISO tooling systems for predictable set‑up Designed as part of an ISO indexable insert system, compatibility with a holder is governed by form, clearance angle, tolerance class, clamping method, size and thickness. The triangular 60° geometry and the central hole with a cylindrical bore and single‑side countersink (40°–60°) ensure secure seating and repeatable clamping. This predictable interface reduces set‑up time and increases repeatability across batches, making the insert suitable for production environments that demand quick changeovers and tight tolerance control. Geometry and chip control that safeguard surface finish A 0.4 mm nose radius and a one‑sided chipbreaker are balanced to deliver a compromise between edge strength and surface integrity. The 2.38 mm plate thickness supports edge stability under radial loads, while the chipbreaker directs swarf away from the cutting zone, improving evacuation during turning operations. These features help achieve a consistent surface finish with fewer passes and reduced risk of thermal or mechanical damage to the workpiece. Economic benefits and application guidance Choosing a tougher, coated grade reduces tool consumption in challenging rostfreier Stahl work and helps avoid scrap and rework. The insert is intended for turning operations where interrupted cuts or unstable chip formation are likely; pairing the insert with an appropriately rated holder, underlay and correct clamping hardware enhances productive machining and protects the cutting edge. For applications outside rostfreier Stahl, confirm material suitability and process parameters to match feeds and speeds to the insert’s strengths. Contact Metav Werkzeuge to discuss how this Tungaloy insert can be matched to existing holders, and to arrange a customised cutting strategy; Metav Werkzeuge is available by e‑mail at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 6890209 SKU: 6890209-Tungaloy Manufacturer SKU: TUN6890209 Model series: ISO‑indexable turning inserts Material: carbide Grade / coating: AH6235 (PVD‑coated) Facts Nose radius: 0.4 mm Included angle: 60° Clearance angle: 11° Plate thickness: 2.38 mm Plate size: 09 Special features Plate form: triangular Hole: with hole Hole style: cylindrical hole + single‑side countersink (40°–60°) Chipbreaker: one‑sided Typical application: turning (external and internal) FAQ Which materials is this insert best suited for? The insert is specified for rostfreier Stahl and is particularly effective in interrupted cuts and conditions with elevated chipping risk; the AH6235 PVD coating enhances wear resistance in these applications. Will the insert fit existing ISO toolholders? Compatibility depends on form, clearance angle, tolerance class, clamping method, size and thickness; the ISO‑compliant triangular geometry and central hole allow integration with holders designed for TPMT090204‑style inserts. How should the insert be mounted and secured? Use a matching outer holder or boring bar with the correct underlay/clamping set and replacement screw; the cylindrical hole with a single‑side countersink ensures firm seating and correct clamp engagement. What cutting scenarios benefit most from this grade? Applications involving rostfreier Stahl, interrupted cuts or higher risk of edge breakout will benefit from the tougher AH6235 grade and PVD coating, which together promote stable cutting and longer edge life. What are the identifiers for ordering and traceability? Article number 6890209, SKU 6890209‑Tungaloy and manufacturer SKU TUN6890209 identify this TPMT090204 AH6235 Tungaloy insert for procurement and inventory control. Manufacturer/Responsible: Tungaloy‑NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand‑new product from the manufacturer.
TPMT 090204 AH6235 Wendeplatten - Tungaloy
Achieve stable, repeatable turning results with the PVD-coated AH6235 grade and a 0.4 mm corner radius for reliable edge strength; the ISO triangular form supports straightforward holder matching, reducing setup time. Order directly via Metav Werkzeuge or request advice from the consultants for selection and holder compatibility. TPMT 090204 AH6235 triangular indexable turning insert, 11° relief — Tungaloy The TPMT090204 is an ISO-format triangular indexable insert for external and internal turning, designed for applications with elevated breakout risk and interrupted cuts. PVD-coated carbide AH6235 optimised for stainless steels Designed for interrupted cuts and high breakout risk Triangular ISO insert, size 09, 60° included angle 11° relief and 0.4 mm corner radius for consistent profiles Cylindrical hole with 40°–60° countersink for secure clamping Increased productivity through longer tool life The combination of a PVD-coated surface and a tougher carbide grade delivers extended tool life when machining demanding materials. The AH6235 composition is formulated for a balance between toughness and wear resistance, which helps to withstand micro‑fracture and edge chipping in unstable cutting conditions. Reduced frequency of insert changes reduces downtime and contributes to a smoother production flow, making the solution particularly suitable for batch processes and mixed production runs. Secure clamping and dimensional stability for predictable results The ISO triangular format with a cylindrical hole and one-sided countersink (40°–60°) ensures repeatable seating and torque transmission when used with compatible holders. The 11° relief angle and 2.38 mm plate thickness provide stable support under cut loads, while the 60° included angle of the triangle offers versatility across external and internal turning operations. The standardised geometry simplifies holder selection and replacement, reducing preparation time for new set-ups. Consistent machining of stainless steels and interrupted cuts Designed specifically for tougher materials, the insert’s single-sided chipbreaker and rounded 0.4 mm corner radius promote controlled chip formation and better edge resilience during interrupted cuts. The tougher grade is less prone to chipping in conditions with variable engagement, which helps maintain surface finish and dimensional accuracy across successive indexings. Where chip ejection and thermal sensitivity are concerns, the PVD coating supports reduced built-up edge and improved surface integrity. Practical system guidance for integration and selection The insert is intended to be used as part of a system comprising the indexable insert plus a matching external holder, underlay/clamp set and spare screws. Selection of the correct chipbreaker and grade depends on workpiece material, cut type and machine stability: a tougher grade and single‑side chipbreaker suit interrupted or unstable cuts, while stable, continuous cuts may allow more wear‑resistant alternatives. For efficient implementation, match the insert’s form, relief, tolerance class, fastening style, size and thickness to the chosen holder to ensure secure clamping and predictable performance. Contact Metav Werkzeuge for a technical consultation on Tungaloy TPMT090204 inserts and to arrange matching holders or spare clamping sets; email info@metav-werkzeuge.com or call +49 2822 7131930 for rapid assistance. Technical data Article number: 6890199-Tungaloy Manufacturer article number: 6890199 Manufacturer SKU: TUN6890199 Model series: ISO turning indexable inserts Material: Carbide Grade: AH6235 Coating: PVD Core specifications Included angle: 60° Relief angle: 11° Corner radius: 0.4 mm Thickness: 2.38 mm Size: 09 Hole style: Cylindrical hole + one-sided countersink (40°–60°) Design & features Triangular insert (ISO 090204) Single-sided chipbreaker System components: insert, matching holder, underlay/clamp set, spare screws Optimised for stainless steels and interrupted cuts ISO compatibility determined by form, relief, tolerance, fastening, size and thickness Suitable for external and internal turning FAQ What materials is this insert best suited for? The insert is formulated to perform well on stainless steels and similar tough materials; the AH6235 grade and PVD coating improve resistance to chipping in such applications. Is the insert suitable for interrupted cutting operations? Yes, the tougher carbide grade and single-sided chipbreaker make this insert appropriate for interrupted cuts and situations with increased breakout risk. How does the clamping system ensure repeatable positioning? The cylindrical hole with a one-sided countersink (40°–60°) provides secure seating and torque transfer when paired with the correct ISO-compatible holder, supporting repeatable positioning. What role does the 0.4 mm corner radius play in performance? The 0.4 mm radius increases edge strength and helps maintain consistent workpiece profiles while reducing the likelihood of edge chipping under fluctuating engagement. Which components are required to build a complete tool system? A complete machining system includes the indexable insert, a matching external holder or boring bar, an underlay/clamp set and appropriate replacement screws for secure fastening. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 090204 AH725 Wendeplatten - Tungaloy
Take advantage of the combination of PVD-coated carbide durability, precise chip control and ISO compatibility for consistent turning performance; order the TPMT090204 AH725 indexable turning insert directly via Metav Werkzeuge or consult our specialists for application advice. TPMT090204 AH725 indexable turning insert — triangular ISO insert for turning, universal grade AH725 by Tungaloy ISO-standard triangular insert PVD-coated carbide grade AH725 Single-sided chipbreaker for stable chips 0.4 mm corner radius, 60° included angle Consistent performance for general turning applications The TPMT090204 AH725 insert is an ISO-standard triangular cutting element designed for routine external and internal turning. Its PVD-coated carbide construction ensures good wear resistance while the AH725 grade provides a balance between toughness and edge stability, which is advantageous when machining both alloyed steel and stainless steels. The result is fewer interruptions, repeatable turning cycles and predictable tool life—important when planning batch production or mixed-material runs. Stable chip control and surface quality A single-sided chipbreaker integrated into the geometry promotes reliable chip formation and evacuation, reducing the risk of built-up edge and improving surface finish on the workpiece. The 0.4 mm corner radius contributes to edge strength and a controlled cutting action, which together with the insert’s geometry helps to maintain consistent component tolerances and minimises secondary finishing operations, saving time on downstream processing. Flexible fit and secure clamping for toolholders Compatibility with toolholders is determined by form, clearance angle, tolerance class, fastening style, size and thickness; this insert is produced to ISO specifications for straightforward interchangeability. The insert’s cylindrical hole with a single-sided countersink (40°–60°) and a thickness of 2.38 mm enable secure mounting in common external holders or boring bars, promoting stable cutting conditions and repeatable indexability when rotating cutting edges to a fresh corner. Process security and economical machining The combination of a universal, break-resistant grade and the PVD coating makes this insert suitable where process reliability is critical, especially in applications with variable workpiece materials or smaller tooling. A consistent edge life reduces scrap and tool-change downtime, supporting higher productivity and predictable manufacturing costs. The geometry’s 60° included angle and 11° clearance support stable engagement and effective force distribution during turning. For application-specific recommendations or to purchase Tungaloy AH725 inserts through Metav Werkzeuge, contact Metav Werkzeuge for technical advice or placement of orders via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 6856673 SKU: 6856673-Tungaloy Material: Carbide Model series: ISO turning indexable inserts Core data Corner radius: 0.4 mm Thickness: 2.38 mm Insert size: 09 Clearance angle: 11° Included angle: 60° Design & special features Grade/coating: AH725, PVD-coated carbide Shape: Triangular Hole style: With hole — cylindrical hole + single-sided countersink (40°–60°) Chipbreaker: Single-sided Typical use: External and internal turning FAQ What materials is this insert suitable for? The TPMT090204 AH725 insert is intended primarily for steel and stainless steels; the AH725 grade delivers a universal, break-resistant performance across a broad material range. How does the chipbreaker influence machining? The single-sided chipbreaker on this Tungaloy insert promotes controlled chip formation and evacuation, improving process stability and surface quality during turning. Is the insert compatible with standard ISO toolholders? Yes. The insert is manufactured to ISO dimensions and interfaces (form, size and hole geometry) to ensure compatibility with common external holders and boring bars. What are the key geometry values to consider when setting up the tool? Important values include the 0.4 mm corner radius, 2.38 mm plate thickness, 11° clearance and 60° included angle for correct holder selection and cutting parameter calculation. Can the insert be indexed to a fresh cutting edge? Yes. The triangular shape provides multiple cutting edges that can be rotated and indexed, extending usable life before replacement. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 090204 AH725 Wendeplatten - Tungaloy
The combination of a PVD-coated carbide AH725 grade and a 0.4 mm corner radius delivers consistent process security and reliable edge life for mixed-steel turning tasks; excellent for small tools and changing workpiece materials. Order the TPMT090204 AH725 turning insert directly via Metav Werkzeuge or consult the technical advisors for holder compatibility and application advice. TPMT090204 AH725 turning insert for turning — Tungaloy The TPMT090204 AH725 is an ISO-indexable triangular turning insert designed for external and internal turning, offering a fracture-resistant grade and engineered geometry for dependable performance in steel and stainless steels. PVD-coated carbide AH725 Triangular insert with 60° cutting angle 0.4 mm corner radius for versatile turning One-sided chipbreaker, countersunk hole Consistent process security through material and coating The AH725 grade combines a PVD-coated surface with a tough carbide substrate to reduce micro-chipping and extend edge life under varying conditions. As a universal, fracture-resistant grade, AH725 is optimised for steel and stainless steels where alternating workpiece materials or interrupted cuts demand steady performance. The coating enhances heat resistance and wear behaviour, which translates into fewer index changes and a more predictable production rhythm — a direct contribution to reduced machine downtime and improved overall productivity. Geometry engineered for precise, repeatable cuts The triangular ISO-indexable form provides a 60° included angle that balances strength and accessibility in external and internal turning. The 0.4 mm corner radius supports a mix of finishing and medium-cut operations, contributing to improved surface integrity without sacrificing tool life. A relief angle of 11° and a plate thickness of 2.38 mm ensure secure clamping and stable cutting conditions when the correct holder is selected. The one-sided chipbreaker is matched to common steel turning tasks to promote controlled chip flow and minimise re-cutting of chips, thereby protecting the cutting edge and workpiece finish. Practical system integration and holder compatibility This ISO insert fits into established indexable-turning systems; compatibility with a toolholder is governed by shape, clearance angle, tolerance class, clamping method, size and thickness. The TPMT090204 features a cylindrical hole with a one-sided countersink (40°–60°) to secure reliable clamping and repeatable positioning. Selecting the matching holder and clamping set ensures the designed cutting geometry is realised at the tool tip, which is essential for consistent component tolerances and predictable tool performance. Where necessary, choose the chipbreaker and grade to match the machining strategy — roughing, semi-finishing or finishing. Clear guidance for typical applications Intended primarily for turning, these inserts perform well in both external and internal operations on steel and stainless steels, especially in production environments with frequent material changes or where tool robustness is critical. The AH725 grade is particularly suitable for smaller-tool setups and applications that demand high process security rather than extreme metal-removal rates. When programmed cutting data are combined with stable fixturing and the correct insert geometry, the result is reproducible component quality and fewer process interruptions. For a tailored recommendation on using the TPMT090204 AH725 in specific turning setups, contact Metav Werkzeuge for technical advice and prompt supply — info@metav-werkzeuge.com • +49 2822 7131930 Technical data Article number: 6864889-Tungaloy Manufacturer SKU: TUN6864889 Manufacturer article number: 6864889 Model series: ISO-indexable turning inserts Grade: AH725 Material: Carbide (PVD-coated) Core specifications Size: 09 Thickness: 2.38 mm Corner radius: 0.4 mm Relief angle: 11° Included angle: 60° Application: Turning Design and special features Triangular insert form One-sided chipbreaker Cylindrical hole with one-sided countersink (40°–60°) ISO designation: TPMT090204 Compatibility determined by shape, clearance angle, tolerance class, clamping, size and thickness FAQ Is this insert suitable for stainless steels? The AH725 grade of the TPMT090204 insert is designed for steels and stainless steels and provides fracture-resistant performance where material changes occur. What does the one-sided chipbreaker do? The one-sided chipbreaker on this insert controls chip formation for common steel turning tasks, aiding chip evacuation and protecting the tool edge. Which holders are compatible with the TPMT090204? Holder compatibility depends on form, clearance angle, tolerance class, clamping method, size and thickness; select a matching ISO toolholder and clamping set for secure positioning. Can this insert be used for finishing operations? With a 0.4 mm corner radius and PVD-coated carbide substrate, the insert can be used for finishing and medium-cut operations where surface integrity and tool life are priorities. What is the ISO designation and key dimensions? The ISO designation is TPMT090204; key dimensions include a 0.4 mm corner radius, 2.38 mm thickness and a 60° included angle. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
TPMT 090204 AH725 Wendeplatten - Tungaloy
Take advantage of the combination of ISO‑standard compatibility, a PVD‑coated AH725 carbide grade for reliable machining of steel and stainless steel, and a compact triangular geometry for versatile turning applications; order the insert directly via Metav Werkzeuge or consult our specialists for holder selection. TPMT 090204 AH725 indexable turning insert by Tungaloy — PVD‑coated carbide, 60° triangle The TPMT 090204 AH725 is an ISO‑standard indexable turning insert designed for external and internal turning, offering a universal, chipbreak‑resistant grade optimised for steel and stainless steel. ISO‑standard triangular insert PVD‑coated AH725 carbide grade One‑sided chipbreaker for controlled chips Cylindrical hole with 40°–60° countersink Consistent process security for mixed‑material turning The AH725 grade is a PVD‑coated carbide formulated for universality and reliable chip formation when machining both steel and stainless steel. The coating improves wear resistance under varying cutting conditions, which supports high process security in mixed‑material production runs. For operations that require stable cutting with smaller tools or frequent material changes, this grade reduces the risk of unexpected edge failure and helps maintain consistent cycle times. Precision geometry for accurate seating and repeatability Built to the ISO standard and supplied in a triangular shape with an included angle of 60°, the insert provides reproducible seating in standard holders. The combination of a 0.4 mm corner radius, 11° clearance angle and 2.38 mm thickness ensures a stable cutting edge and predictable deflection behaviour. These geometric parameters contribute directly to repeatable clamping, reduced vibration and improved surface finish—advantages that translate into fewer reworks and more consistent component quality. Controlled chips and reduced setup time through compatible clamping The one‑sided chipbreaker design delivers controlled chip flow for common turning tasks, while the cylindrical hole with a 40°–60° countersink supports secure fastening in compatible clamping systems. Holder compatibility is determined by form, clearance angle, tolerance class, fastening method, size and thickness; therefore, pairing the insert with a matching external holder or boring bar and the correct backing/clamping set is essential for achieving the expected performance. A system approach—insert, holder, backing pad and spare screws—minimises downtime when changing tools. Practical application guidance for turning operations Intended for external and internal turning, the insert suits a wide range of tasks where reliability and manageable chip control are priorities. Select the appropriate chipbreaker and grade settings according to workpiece stability and material mix to maximise tool life and productivity. For smaller cutters and demanding process windows the AH725 grade offers a balance between wear resistance and fracture toughness that supports productive machining with consistent results. For secure, productive turning with the PVD‑coated AH725 grade, order the TPMT 090204 AH725 from Metav Werkzeuge or request specific holder recommendations by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 6865201 SKU: 6865201-Tungaloy Manufacturer SKU: TUN6865201 Manufacturer article number: 6865201 Series: ISO turning inserts Data Corner radius: 0.4 mm Clearance angle: 11° Insert thickness: 2.38 mm Insert size: 09 Insert angle: 60° Hole style: cylindrical hole + single‑side countersink (40°–60°) Special features Grade: AH725 Coating: PVD‑coated carbide Shape: triangular Application: external and internal turning Chipbreaker: one‑sided FAQ Is this insert suitable for stainless steel machining? Yes. The TPMT 090204 AH725 insert uses a PVD‑coated AH725 carbide grade designed for reliable performance on stainless steel as well as general steels, offering good chip control and wear resistance. Which holders are compatible with this triangular insert? Compatibility depends on the holder’s form, clearance angle, tolerance class, fastening and size; the TPMT 090204 AH725 fits ISO‑standard triangular holders for 60° inserts and requires a clamping system that accepts a cylindrical hole with the specified countersink. What does the 0.4 mm corner radius mean for machining? A 0.4 mm corner radius provides a balance between edge strength and detail: it improves edge robustness and surface finish while remaining suitable for moderate finishing and general turning operations. Can the insert be used for both internal and external turning? Yes. The insert is specified for external and internal turning; selection of the proper chipbreaker and a suitable boring bar or external holder will determine the final process reliability. What is included when ordering this article? The offer covers the indexable insert itself (TPMT 090204 AH725). For a complete system, select the appropriate external holder or boring bar, backing pad/clamping set and fasteners according to the holder interface. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com