was für messschieber gibt es?

Take advantage of the combination of a long 1,000 mm range, a robust hardened stainless steel construction and an intuitive digital display for reliable measurement of large components; order the caliper directly via Metav Werkzeuge or consult our advisors for integration into existing quality processes. Digital Universal Caliper M240.204 — 1,000 mm, digital readout The Digital Universal Caliper M240.204 is a heavy‑duty 1,000 mm digital caliper engineered for workshop and fixture applications where long‑range, repeatable measurements are required. 1,000 mm measuring range Hardened stainless steel construction Digital display with mm/inch and ABS/INC RB 2 data output for process integration Long reach for large assemblies and robust repeatability The extended 1,000 mm range places this instrument in the large‑scale caliper class, intended for measurements on sizeable workpieces such as plates, housings and large fittings. The long beam design gives a favourable balance between reach and rigidity: a stiffer profile reduces deflection over length, which improves reproducibility when measuring across spans. For production environments and jigs where a single tool must cover larger geometries, this caliper provides a practical alternative to multiple short gauges. Precise digital measurement and data transfer capability Equipped with a digital display featuring mm/inch, ABS/INC and a 0/PRESET function, the instrument simplifies switching units and datum settings during inspection tasks. The reading resolution is 0.01 mm, delivering the clarity typical of standard digital calipers while the RB 2 data output enables connection to data collectors or SPC systems for traceable measurement logging. Together, these features support efficient quality workflows and reduce manual transcription errors. Durable construction tuned for workshop use The caliper is manufactured from hardened stainless steel with a protective metal housing, designed to withstand day‑to‑day workshop handling and resist corrosion. Upper and lower measuring faces are specified as 20 × 15 mm, with the upper jaw length at 50 mm and the lower jaw length at 100 mm, giving secure contact surfaces for both accessible and recessed measurements. At a weight of 2.5 kg the instrument balances solid build quality with manageable handling for single‑operator use or bench measurement tasks. Practical application: integration, inspection and workshop reliability This digital caliper is suitable for integration into metrology benches, incoming inspection and jig verification where longer measurement spans are required. The combination of a clear digital interface, robust materials and a dedicated data output supports repeatable checks and streamlined documentation. Backed by Metav’s distribution network and quality control in Emmerich, the tool is intended for industrial users seeking dependable measurement over longer lengths without sacrificing the convenience of digital readout. Order the Digital Universal Caliper M240.204 through Metav Werkzeuge for local stock availability and specification assistance—Metav Werkzeuge in Emmerich offers product advice and reliable delivery for professional measurement needs. Technical Data Article number: M240.204 GTIN: 4054469158273 Category: Messschieber Measuring range: 0–1000 mm Resolution (display): 0.01 mm Weight: 2.5 kg Jaw upper length: 50 mm Jaw lower length: 100 mm Material: hardened stainless steel Housing: metal housing Digital functions: ON/OFF, mm/inch, ABS/INC, 0/PRESET Data output: RB 2 FAQ What measurement range does this caliper cover? The Digital Universal Caliper M240.204 covers a measuring range of 0–1000 mm, making it suitable for larger components and assemblies. What level of resolution and display functions are provided? The caliper offers a display resolution of 0.01 mm and includes ON/OFF, mm/inch switching, ABS/INC and 0/PRESET functions for straightforward operation. Can measurement data be exported to a data logger or PC? Yes. The instrument is equipped with an RB 2 data output to enable connection to data collectors or SPC systems for streamlined documentation. What materials and jaw dimensions does the caliper use? The caliper is made from hardened stainless steel with a metal housing; the upper jaw length is 50 mm and the lower jaw length is 100 mm, both with a contact cross‑section of 20 × 15 mm. Is this instrument suitable for workshop and production environments? Designed with a robust build and clear digital functions, the Digital Universal Caliper M240.204 is appropriate for workshop inspection, jig verification and production quality checks where extended measuring range is required. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of the lightweight carbon-fibre construction together with the 150 mm measuring length to speed external measurements while reducing hand fatigue; order the attachment directly via Metav Werkzeuge or ask our consultants if any clarification is needed. External measuring jaw M217.364.2 — 150 mm carbon-fibre attachment for digital universal calipers (Metav IndustryLine) A External measuring jaw M217.364.2 designed as a precision attachment for external measurements on digital universal calipers, offering a light, stiff alternative for routine workshop checks. Carbon-fibre construction, high stiffness 150 mm measuring length for external use Fits calipers with 8 mm jaw thickness Weight 0.2 kg for easy handling Faster, more reliable external measuring in everyday workflows The carbon-fibre construction delivers a high stiffness-to-weight ratio that reduces operator fatigue and improves repeatability during repetitive tasks. By replacing heavier jaws with a carbon-fibre attachment, measurement cycles become more efficient because handling is easier and less brace force is required. The 150 mm length provides a practical reach for common external dimensions while remaining rigid enough to avoid bending under normal workshop use. This results in consistently reproducible measurements and a noticeable reduction in handling time during batch checks. Straightforward fitment and workshop practicality Designed specifically for calipers with a jaw thickness of 8 mm, the accessory mounts cleanly to compatible digital universal callipers and is intended for rapid swap‑out without additional tools. The slim profile and lightweight build make it particularly suitable for technicians who need to switch between internal and external measuring setups frequently; the reduced mass lowers the risk of accidental slippage and helps maintain alignment during contact. Clear mechanical fitment reduces setup time, supporting faster throughput on assembly and inspection benches. Material benefits that support precision and durability The choice of carbon-fibre gives a corrosion‑resistant alternative to metal jaws and maintains dimensional stability under normal workshop conditions. Its low weight contributes to gentler contact forces, which helps preserve delicate surfaces and reduces marking on softer workpieces. The design focuses on practical robustness: a stiff, slim geometry for external measurement combined with a compact footprint that does not obstruct access to confined areas. Where repeatable, low‑effort external gauging is required, this attachment offers a measurable improvement in handling and operator comfort. Contact Metav Werkzeuge for personalised advice on integrating the Metav IndustryLine 150 mm carbon-fibre external measuring jaw into the workshop setup, or to request detailed compatibility confirmation from our specialists in Emmerich. Technical data Article number: M217.364.2 Manufacturer: Metav IndustryLine Category: Workshop calipers accessory Facts Length: 150 mm Weight: 0.2 kg Width: 16 mm Compatible jaw thickness: 8 mm Special features Material: Carbon-fibre Intended use: External measurement (also suitable for internal checking depending on caliper setup) Designed for digital universal calipers Light, stiff construction for repeatable handling FAQ How does this attachment improve everyday measuring tasks? The carbon-fibre 150 mm measuring jaw reduces weight and operator fatigue while maintaining stiffness, so the Metav IndustryLine jaw helps achieve more consistent external measurements during repetitive checks. Is the jaw compatible with my caliper? Compatibility requires a jaw thickness of 8 mm; the M217.364.2 is specified to fit digital universal calipers that accept this dimension. Can this jaw be used for internal measurements as well? While optimised for external measurement, the design also allows internal checks in many setups when used with a suitably configured caliper and stable measuring technique. What care is recommended to preserve accuracy? Clean contact faces regularly and avoid impacts; the carbon-fibre construction is corrosion‑resistant but benefits from routine inspection to ensure alignment and damage‑free performance. What is the actual weight and size for handling considerations? The attachment weighs 0.2 kg and measures 150 mm in overall length with a 16 mm width, making it easy to handle for single‑operator tasks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of a compact replacement rail that brings repeatable angle measurement, a stiff 16×2.5 mm profile and lightweight handling to routine metrology tasks; the rail's simple geometry reduces setup time and supports stable readings. Order the rail directly via Metav Werkzeuge or ask our consultants if needed. 200 mm rail for TOP universal angle measuring instrument (without packaging) — 16×2.5 mm profile, Metav IndustryLine The 200 mm rail for TOP universal angle measuring instrument is a precision replacement component intended for angle alignment and measurement in industrial metrology applications, offering a compact profile for confined fixtures and repeatable positioning. 200 mm precision measurement rail 16 × 2.5 mm cross-section profile Lightweight: approx. 0.1 kg for easy handling Compatible with TOP universal angle instrument Stable reference for repeatable angle checks The 200 mm measuring rail serves as a short, rigid reference that minimises deflection during use, which is crucial for repeatable angle checks in production and inspection. Its compact length reduces lever arms and improves the stability of the measurement chain, so readings can be relied on for pass/fail decisions in assembly and jig alignment. Profile design that resists bending and wear The 16×2.5 mm cross-section is selected to deliver a stiff yet slim bearing surface that resists twisting under clamping or light handling. This profile reduces measurement uncertainty caused by deformation and ensures the rail retains its straightness over repeated cycles, supporting consistent angular alignment in jigs and fixtures. Low mass for straightforward installation and handling At approximately 0.1 kg, the component is intentionally lightweight to ease positioning during tool changes and to reduce strain during installation in compact setups. The low mass simplifies single-person handling and helps maintain alignment when mounted to portable or temporary setups. Designed for straightforward integration with TOP systems Engineered as a direct fit for TOP universal angle instruments, the rail allows rapid exchangeability on machines and test rigs. The defined geometry and mounting references support fast replacement, enabling maintenance cycles to be completed with minimal machine downtime and without complex readjustment. Practical benefits for workshop throughput Using a standard replacement rail reduces the time spent on re-levelling and recalibration after component swaps. The uncomplicated form factor supports faster process recovery after wear or damage and stabilises inspection workflows, contributing to improved overall equipment effectiveness (OEE). Reliable sourcing and clear identification The component is supplied with manufacturer identification and catalogue references for traceability, making stock management and reorder straightforward. As part of the Metav IndustryLine range, the rail benefits from the supplier’s quality filter for European distribution and logistical support from Emmerich. Contact Metav Werkzeuge for a compatibility check or a tailored delivery proposal for this Metav IndustryLine 200 mm rail — expert advice is available by phone at +49 2822 7131930 or by e‑mail at info@metav-werkzeuge.com Technical Data Article number: M214.098.2 GTIN: 4061905053658 Facts Length: 200 mm Cross-section: 16 × 2.5 mm Weight: 0.1 kg Special features Compatible with TOP universal angle instrument Delivered without packaging FAQ Is this rail compatible with TOP universal angle instruments? The rail is supplied as a direct replacement rail compatible with TOP universal angle measuring instruments and intended for straightforward interchange. Does the component arrive packaged? This item is delivered without packaging, supplied as the rail only to simplify storage and to reduce packaging waste. What are the rail's main dimensions? Length is 200 mm with a cross-section of 16 × 2.5 mm; weight is approximately 0.1 kg. How is the item identified for reordering? The component is stocked under the article number M214.098.2 and GTIN 4061905053658 for clear traceability and replenishment. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Benefit from a robust stainless steel construction, a DIN 862 vernier with 0.02 mm resolution and an interchangeable measuring rod for flexible depth measurement — order directly via Metav Werkzeuge or consult our specialists for technical advice. Depth Gauge M204.069 — Interchangeable Rod, 0.02 mm Vernier (DIN 862) A Depth Gauge M204.069 designed for precise depth and step measurement in machine shops and inspection tasks. Stainless steel, matt chrome scale and vernier Precise vernier resolution 0.02 mm Interchangeable measuring rod for tight recesses Conforms to DIN 862 standard Accurate construction for repeatable workshop measurements The depth gauge is built from stainless steel with a matt‑chrome finish on the scale and vernier, which reduces reflection and keeps graduations legible under workshop lighting. With a measuring range of 0–300 mm and a mechanical Vernier (1/50 mm) giving 0.02 mm resolution, the instrument fulfils the Standard class for workshop calipers and depth gauges, offering industrially relevant precision for everyday quality control. The adherence to DIN 862 provides a verifiable standard for traceable routines and supports consistent process inspection across production runs. Flexible probe and practical handling for confined spaces Equipped with a pointed probe and an interchangeable measuring rod, this gauge is tailored to reach narrow bores and recessed features while still giving a clear analogue readout. The mechanical design ensures ruggedness for shop use: the smooth sliding action and firmly seated rod reduce measurement scatter caused by handling. Supplied in a transport case, the instrument is protected during transit and storage, making it suitable for mobile inspection tasks or shared metrology stations where durability and quick readiness matter. Everyday benefits that support workflow and trust As part of the Metav IndustryLine, the tool is positioned for dependable workshop integration: clear 0.02 mm resolution for validated checks, a corrosion‑resistant finish for longevity, and a compact form factor that suits benches and inspection tables. Metav’s offering combines wide product availability with a quality filter based in Emmerich, supporting reliable supply and consistent product standards — a practical choice for workshops seeking reproducible measurements without complex setup. The mechanical readout keeps the instrument straightforward to use while maintaining the precision required for machining and assembly tasks. Choose the Metav IndustryLine depth gauge for robust, repeatable depth measurement and contact Metav Werkzeuge for expert guidance or to arrange delivery from Emmerich. Technical Data Article number: M204.069 GTIN: 4054469164137 Standard: DIN 862 Manufacturer: Metav IndustryLine Facts Measuring range: 0–300 mm Bridge: 150 mm Resolution: 0.02 mm Nonius: 1/50 mm Tariff number: 90173000 Special features Material: stainless steel with matt chrome scale and vernier Probe: pointed probe and interchangeable measuring rod Delivery: supplied in a transport case Type: analogue mechanical vernier depth gauge FAQ What measuring range does the gauge cover? The depth gauge offers a measuring range of 0–300 mm, suitable for standard workshop and machine‑building tasks. What accuracy and resolution can be expected? Resolution is 0.02 mm via the mechanical vernier (1/50 mm), providing the fine graduations required for routine inspection and machining checks with repeatable results. Is the instrument protected during transport? Yes, the gauge is supplied in a transport case to protect the instrument and accessories during carriage and temporary storage. Which materials and features support shop use? Constructed from stainless steel with a matt‑chrome scale and vernier, the gauge resists corrosion and glare; the pointed probe and interchangeable rod enable measurement in narrow or recessed features. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

The combination of robust IP67 protection, an inductive measuring system and a 0.01 mm display resolution delivers dependable depth measurement for everyday workshop control; benefit from fast, repeatable readings and corrosion‑resistant construction. Order via Metav Werkzeuge or contact our consultants for specification advice and prompt supply. Digital depth gauge M218.122.D — 0–300 mm range, IP67 protection Digital depth gauge M218.122.D provides precise depth measurement for machine shops and quality control, designed as a rugged industrial instrument for standard workshop tasks IP67 protection against dust and water immersion Inductive measuring system for long service life 0.01 mm display resolution for fine control Hardened stainless steel construction Complies with DIN 862 for workshop metrology Precise readings that fit the workshop routine The instrument is built around an inductive measuring system and a standard 0–300 mm range, classifying it as a workshop‑standard depth gauge that balances reach and stiffness. With a display resolution of 0.01 mm, the device supports repeatable checks in production and incoming‑goods inspection; the numeric step size is explained on the display and allows operators to distinguish between tolerances comfortably. Compliance with DIN 862 ensures the unit meets recognised dimensional metrology requirements, so results integrate easily into existing QC procedures. Durable construction for harsh working environments A hardened stainless steel body and an IP67 rating protect the instrument from coolant, chips and dust, reducing measurement downtime and prolonging service life. The digital readout runs from a replaceable 3 V CR 2032 battery and the control panel offers MODE, INC, HOLD and 0/ON keys for straightforward handling during repetitive tasks. At approximately 0.6 kg, the gauge is substantial enough to feel stable while remaining portable for bench or on‑machine checks. Simple operation, tailored to industrial use The depth gauge is supplied without data output, which suits inspection stations that record values manually or with stand‑alone documentation procedures. The inductive sensor reduces sliding contact wear compared with mechanical racks, maintaining accuracy over prolonged use. As a Standard class instrument, it is particularly well suited to general metalworking, fixture checks and routine quality control where robust, quick depth measurements are required without the complexity of automatic data transmission. Contact Metav Werkzeuge for specialist advice on integrating the M218.122.D into your workshop workflow and to arrange supply from our Emmerich warehouse Technical data Article number: M218.122.D GTIN: 4054469182957 Label: Digital-Tiefenmaß 300 x 150 mm, IP67 Ohne Datenausgang Brand: Metav IndustryLine Facts Measurement range: 0–300 mm Resolution: 0.01 mm Protection rating: IP67 Weight: 0.6 kg Battery: 3 V CR 2032 Bridge: 150 mm Measuring system: inductive Compliance: DIN 862 Special features Hardened stainless steel construction Digital display with MODE, INC, HOLD, 0/ON buttons No data output (without interface) Robust sensor technology for extended service life FAQ How accurate is the measurement on this digital depth gauge? The device provides a display resolution of 0.01 mm and conforms to DIN 862, offering accuracy and repeatability suitable for routine workshop inspection with clear numeric feedback. Is the gauge suitable for use on a busy shop floor? Yes. The IP67 rating and hardened stainless steel construction make the unit resistant to dust and coolant exposure, so it is appropriate for machine‑shop environments. Can measurement data be exported to a computer or SPC system? This model is supplied without data output, so readings are intended for manual recording or integration into non‑automated inspection processes. What battery does the instrument use and is it easy to replace? The gauge uses a standard 3 V CR 2032 coin cell, which is easily replaced in the field to minimise downtime. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of a compact, workshop-ready depth gauge that combines stainless steel construction, a vernier resolution of 0.05 mm, and an interchangeable pin tip for versatile depth measurement; order the device directly via Metav Werkzeuge or consult our specialists for application guidance. M204.066 – Depth gauge (0–80 mm), stainless steel, DIN 862 by Metav IndustryLine The M204.066 is a stainless steel depth gauge with an interchangeable pin tip, designed for precise depth measurements in fine mechanical and general workshop applications up to 0–80 mm. Stainless steel with matt chrome scale Interchangeable pin tip for versatile depths Nonius 1/20 mm for 0.05 mm resolution Supplied in protective case Reliable, measurable precision for daily workshop tasks The mechanical vernier design delivers a 0.05 mm reading step, indicated by the Nonius (1/20 mm) system, making the instrument suitable where consistent, reproducible depth readings are required. The vernier mechanism converts fine adjustments into a clear, repeatable scale reading; this analogue arrangement is robust against electromagnetic interference and requires no batteries, which reduces downtime and maintenance complexity. The design supports routine inspection and set-up work where traceable, simple measurements are preferred over digital overlays. Robust construction that stands up to workshop use Constructed from stainless steel with a matt chrome scale and vernier, the gauge complies with DIN 862, ensuring dimensional reliability and interchangeability across standardised measuring tools. The corrosion-resistant material and plated scale preserve legibility and functional life in busy shop environments, while the compact build minimises flex and improves handling for single-handed operation. This combination of materials and standard conformity sustains long-term performance and reduces the need for frequent replacements. Versatility through the interchangeable pin tip and measured reach Equipped with an interchangeable pin tip, the instrument adapts quickly to varying depth profiles and blind features that are otherwise difficult to reach. The detachable measuring rod allows modification of the contact geometry without changing the whole tool, so different countersink depths or stepped features can be measured with the same instrument. The practical layout expedites measurement sequences and keeps tool inventory lean while maintaining measurement integrity. Compact format tailored to fine and detailed measurement work With a maximum range of 0–80 mm, this device falls into the Micro class of measuring instruments, where compactness and stiffness are prioritised for fine mechanical tasks. The small footprint makes it ideal for clock and instrument makers, prototype shops and precision assembly stations where short-range depth checks are frequent. The compact dimensions combine reach and rigidity, ensuring that short-span repeatability remains high even when access is limited. Contact Metav Werkzeuge in Emmerich for delivery and technical advice on the M204.066 depth gauge: info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: M204.066 GTIN: 4054469164144 Category: Calipers / Depth gauge Standard: DIN 862 Facts Measuring range: 0–80 mm Resolution (vernier): 0.05 mm Vernier type: 1/20 mm (bottom) Analog instrument (mechanical vernier) Special features Material: stainless steel with matt chrome scale and vernier Interchangeable pin tip and removable measuring rod Supplied in protective case for transport Suitable for compact, fine‑mechanical and workshop inspection tasks FAQ What measuring range does the gauge cover? The measuring range is 0–80 mm, making the instrument suitable for short‑to‑medium depth tasks typical of workshop and fine‑mechanical work. What reading resolution and vernier type are provided? The vernier is a 1/20 mm type, corresponding to a reading step of 0.05 mm, which is typical for analogue instruments in industrial use. Is the instrument corrosion resistant? Yes, the body and scale are made from stainless steel with a matt chrome finish that protects the scale and vernier against workshop conditions. Can the tip be adapted to different measurement tasks? The interchangeable pin tip and removable measuring rod allow quick adaptation for blind holes, stepped depths and special contact geometries without replacing the whole instrument. Does the product conform to industry standards? The tool is manufactured in accordance with DIN 862, ensuring consistency with standard workshop measuring equipment. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Compact, corrosion‑resistant construction and a simple locking lever deliver repeatable results for precision micro‑work; combined with a fine 0–90 mm measuring range and 0.1 mm reading, this instrument streamlines small‑part inspection and assembly. Order directly via Metav Werkzeuge or consult our specialists for application advice. Caliper M201.007 — precision caliper, 0–90 mm range, 0.1 mm resolution (Metav IndustryLine) The Caliper M201.007 is a compact precision tool for specialist fine‑mechanical measurements, designed for external and depth checks where small jaws and a light, stiff frame make handling and repeatable readings straightforward Compact 0–90 mm measuring range 0.1 mm reading for quick verification Stainless steel construction for durability Curved measuring jaws for small contours Locking lever for repeatable measurements Precise micro‑measurements with clear benefits This caliper offers a 0–90 mm measuring range classified as micro, which is ideal where reach is limited but stiffness and precision are essential. The 0.1 mm vernier reading provides a straightforward, verifiable value for common inspection tasks; as an analogue instrument it requires no batteries and gives immediate, tactile feedback. The stainless steel construction resists workshop environments while the curved jaws allow secure contact on small or rounded components, reducing the need for supplementary fixtures and saving set‑up time. Designed for consistent workflow and easy handling A low mass of around 0.1 kg and a compact jaw length of 23 mm make the instrument easy to manoeuvre in one hand during repetitive checks. The integrated locking lever fixes the slider for transfer measurements and repeatability, turning individual readings into reproducible data points on the shop floor. For quick depth checks and external measurements the simple scale and clamp arrangement reduce operator variation, improving throughput without complex procedure changes. Practical applications and workshop suitability Classified for micro measurement work, this caliper suits fine‑mechanical workshops, small component inspection and specialist production tasks that value compactness over long reach. The curved tips help when measuring small bores or contours, while the robust stainless construction supports daily use. As a dedicated verification tool for short spans, it complements larger calipers in a metrology kit and serves as a reliable go‑to for routine dimensional checks. For precision micro‑work choose the Metav IndustryLine Caliper M201.007 — contact Metav Werkzeuge for tailored advice at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: M201.007 GTIN: 4054469183206 Weight: 0.1 kg Material: stainless steel Measuring range: 0–90 mm Resolution: 0.1 mm Jaw length: 23 mm Special feature: locking lever Jaw tips: curved Facts Measuring range max: 90 mm Measuring range min: 0 mm Resolution/display: 0.1 mm Weight: 0.1 kg Jaw length: 23 mm Special features Suitable for external and depth measurements Curved measuring jaws for small contours Stainless steel construction Category: Special caliper Range class: Micro (max 10–100 mm) FAQ What accuracy can be expected from this caliper? The Caliper M201.007 from Metav IndustryLine provides a vernier reading at 0.1 mm resolution, suitable for reliable shop‑floor verification and everyday dimensional checks. Which measurement types are possible with this instrument? External and depth measurements are supported by the design; the curved jaws also assist with measurements on small contours and rounded features. Is the caliper resistant to corrosion in a workshop environment? Yes, the stainless steel construction of the Caliper M201.007 offers good resistance to typical workshop conditions and frequent handling. Does the instrument include a calibration certificate? This product is supplied without an ISO 17025 calibration certificate by default; specific calibration services can be arranged separately if required. What advantages does the locking lever provide in routine use? The locking lever fixes the slider for transfer and repeat measurements, improving repeatability and reducing operator‑induced variation during inspection runs. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Taking advantage of durable carbide tips and straightforward compatibility with the 201.274–201.277 series provides reliable, repeatable scribing for workshop layout tasks; the robust design minimises downtime and simplifies maintenance. Order replacements via Metav Werkzeuge or consult our advisors for technical clarification. Replacement Scribing Tips M201.274.A — Pair with Carbide Points (Metav IndustryLine) Replacement Scribing Tips M201.274.A designed for precision marking and layout work in mechanical workshops and maintenance departments Durable carbide marking tips for long service life Compatible with 201.274–201.277 series fittings Robust construction for repeatable scribing results Precision and longevity for everyday marking The set of carbide tips is engineered to deliver consistent line quality over extended use, making it suitable for recurring layout and scribing operations. The hard-wearing point material retains sharpness, reducing the frequency of replacement and ensuring repeatable marks on hardened surfaces. This lowers rework and contributes to a steadier production flow, particularly where accuracy in transfer and reference lines is essential. Fast replacement, reduced downtime Designed for swift installation on the matching fittings, the replacement tips allow maintenance teams to restore full functionality quickly. The compact package (gross weight approx. 0.2 kg) keeps stock management simple and the minimal handling required reduces the risk of alignment errors during changeover. Compatibility with the 201.274–201.277 range ensures spare-part standardisation and fewer different spare items to carry in the workshop. Practical fit for workshop layout and measuring fixtures These scribing points are a pragmatic accessory where precision marking supports assembly, machining and inspection tasks. The robust design resists deformation under normal scribing forces and maintains a reliable centre point for repetitive work. Metav IndustryLine supplies this spare part as part of a broader commitment to accessible, professional measurement solutions, backed by warehouse distribution in Emmerich for dependable supply. For reliable, workshop-ready replacement scribing tips from Metav IndustryLine, contact Metav Werkzeuge for ordering and compatibility advice; Metav Werkzeuge is available at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: M201.274.A GTIN: 4054469182759 Manufacturer: Metav IndustryLine Key figures Weight: 0.2 kg Features Pair with carbide tips Compatible with models 201.274–201.277 Category: Calipers (measuring instruments) FAQ What materials are these tips suitable for marking? The replacement tips are carbide-tipped for durability and are intended for standard workshop marking tasks; they produce reliable scribe marks on common metalwork during layout operations with the compatible fixtures. Can these tips be fitted to other model ranges? Compatibility is specified for the 201.274–201.277 series; fitting to other ranges is not guaranteed and should be verified against the relevant fixture dimensions before purchase. How often should the carbide points be replaced? Replacement frequency depends on usage intensity and the materials marked; the carbide construction is intended to extend service life compared with softer points, reducing replacement intervals in regular workshop use. Is the product supplied as a calibrated measuring instrument? This item is an accessory (scribing tips) and is supplied as a replacement part; it does not constitute a calibrated measuring instrument. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com