was macht einen guten messschieber aus?

Take advantage of a robust, workshop-ready instrument that combines IP67 protection, a 0.01 mm digital resolution and hardened stainless steel construction for reliable results in everyday quality control. The unit’s 150 mm measuring range and round depth rod (1.6 mm) make it a practical Standard-class caliper for machine shops; order directly via Metav Werkzeuge or consult the Metav team for application advice. Digital caliper 150 mm, IP67 with round depth rod 1.6 mm — Metav IndustryLine The Digital caliper 150 mm, IP67 with round depth rod 1.6 mm is a workshop-grade measuring instrument designed for robust indoor use and precise dimensional checks across machine building and inspection tasks. IP67 protection for dust and water resistance 0.01 mm digital resolution with MODE/SET display Hardened stainless steel construction Four measurement functions: inside, outside, depth, step Consistent accuracy for routine quality control A clear technical advantage of this digital instrument is its 0.01 mm display resolution combined with an indicated measurement accuracy of ±0.03 mm, which aligns with industrial expectations for Standard-range calipers. The 150 mm measuring span places the tool in the Standard category for workshop use, offering a practical balance between reach and rigidity. Compliance with DIN 862 supports reproducible procedures and makes the instrument suitable for incoming inspections, setup checks and day‑to‑day dimensional control where traceable, comparable values are required. Built to withstand the workshop environment The jaws and beam are made from hardened stainless steel, giving the caliper mechanical durability while resisting corrosion in typical production environments. With an IP67 rating, the unit tolerates dust ingress and temporary immersion, reducing the risk of downtime due to contamination or coolant exposure. The slender round depth rod (1.6 mm) permits reliable depth and step measurements in narrow features, while the compact overall weight (approx. 0.4 kg) keeps single‑hand operation comfortable during repetitive measurement tasks. Practical operation and measurement versatility The electronic display features MODE/SET controls for quick unit selection and zeroing, supporting metric and inch readouts (resolution: 0.01 mm / 0.0005 in) and straightforward setup in inspection workflows. The instrument offers four measurement modes — outside, inside, depth and step — which reduces the need to change tools between typical checks. Delivery includes a protective transport case to simplify storage and safe handling between job stations. The overall design emphasises dependable ergonomics and straightforward integration into quality routines. For workshop-grade measurements relying on IP67 protection and precise 0.01 mm readout, choose the Metav IndustryLine digital caliper and contact Metav Werkzeuge for tailored advice at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: M216.151.N GTIN: 4054469178844 Brand: Metav IndustryLine Facts Measuring range: 0–150 mm Resolution: 0.01 mm (0.0005 in) Indicated accuracy: ±0.03 mm Weight: 0.4 kg Depth rod diameter: 1.6 mm Special features Material: hardened stainless steel Protection class: IP67 Display: digital with MODE and SET buttons Measurement modes: outside, inside, depth, step Conforms to DIN 862 Supplied in protective case for transport and storage FAQ What measurement functions does the caliper provide? The digital caliper supports four measurement functions — outside, inside, depth and step — enabling versatile checks without changing tools. Is the instrument suitable for use near coolants or in dusty environments? Yes, the unit’s IP67 rating ensures resistance to dust ingress and to temporary immersion, making it robust in many workshop conditions. What level of precision can be expected from this 150 mm caliper? The caliper provides a resolution of 0.01 mm with an indicated accuracy of ±0.03 mm, appropriate for standard machine‑shop inspection work. Does the caliper comply with any measurement standards? The instrument is manufactured to meet the requirements of DIN 862, supporting reproducible metrology procedures in the workshop. What materials and features support durability? Construction in hardened stainless steel, a sealed IP67 design and a protective transport case combine to reduce wear and protect the instrument during use and storage. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Compact, robust and ready for integration: the caliper combines 0.01 mm resolution, a hardened stainless steel construction and an RS232C data interface for reliable shop-floor measurement and simple data logging. Order the digital pocket caliper directly via Metav Werkzeuge or ask our consultants if needed. Digital pocket caliper »Digital‑Taschen‑Messschieber, schwarz« — pocket caliper with RS232 data output A Digital pocket caliper, black, designed for portable precision measuring across workshop and inspection tasks, combining compact format with a clear display and data connectivity. Compact pocket format for mobile measuring 0.01 mm resolution for standard workshop control RS232C output for data logging and traceability Delivered in a transport box for safe storage Precision and portability for routine measurement tasks The compact digital caliper is built to bring reliable, repeatable results to everyday workshop measurement. With a resolution of 0.01 mm and a clear display with 12 mm digit height, read‑outs are quick and unambiguous — reducing reading errors during repetitive checks. The caliper’s hardened stainless steel jaws and beam resist wear and provide mechanical stability; this material choice supports long term dimensional stability and helps maintain calibration intervals. The lightweight design (approx. 0.3 kg) and pocket format make the tool suitable for mobile inspections where access and handling matter. Seamless documentation and integration for quality processes Equipped with an RS232C (RB2) data output, the instrument enables direct transfer of measurement values to data collection systems or inspection software. This connectivity supports quality processes that require traceable records or statistical process control, reducing manual transcription and associated errors. The display features mm/inch toggle and dedicated zero and on/off controls, streamlining measurement workflows and allowing swift switching between unit systems without extra calculation. Versatile measuring functions for common workshop needs This pocket caliper performs four fundamental measurement modes — external, internal, depth and step measurements — so it covers the typical checks required in metalworking and assembly. The combination of a compact jaw geometry and hardened contact surfaces allows access to small features while retaining repeatability. For routine parts inspection and quick setup checks, the instrument provides a practical balance of reach and manoeuvrability. Practical protection and workshop readiness The device is supplied in a transport box for protection during storage and transit, helping prevent knocks and contamination that could affect accuracy. The robust surfaces and compact form factor reduce susceptibility to damage when carried in pockets or toolkits, and the easy‑to-read digits speed up inspection cycles. Where traceability is required, data logging via RS232C simplifies the creation of measurement records without additional adapters. For tailored advice and immediate availability, contact Metav Werkzeuge in Emmerich — Metav’s specialists can confirm stock, compatibility with inspection systems and ordering options for this Metav IndustryLine caliper (SKU M216.086) — call +49 2822 7131930 or email info@metav-werkzeuge.com. Technical data SKU: M216.086 GTIN: 4061905082559 Manufacturer: Metav IndustryLine Facts Resolution: 0.01 mm Display digit height: 12 mm Weight: 0.3 kg Data output: RS232C (RB2) Special features Material: hardened stainless steel Measuring modes: external, internal, depth, step (4‑way measurement) Display functions: on/off, zero, mm/inch Delivery: transport box (plastic or wooden box) FAQ How accurate is the measurement from this digital pocket caliper? The caliper offers a resolution of 0.01 mm, suitable for standard workshop control and routine inspection tasks; accuracy depends on application and handling. Can measurement values be exported directly to a computer? Yes — the unit has an RS232C (RB2) data output for direct transfer of readings to compatible data collection systems. Which measurement types are supported by this caliper? The instrument supports four measurement types: external, internal, depth and step measurements, making it versatile for general workshop use. Is the caliper protected for transport? The caliper is supplied in a transport box to protect the instrument during storage and transit. What material are the jaws and beam made from? The caliper is manufactured from hardened stainless steel, chosen for wear resistance and stability. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Benefit from a robust stainless steel construction, an interchangeable pin tip for recessed measurements and a precise 0.05 mm nonius for dependable depth checks in routine workshop work; order the depth gauge directly via Metav Werkzeuge or consult our specialists for application advice. Depth Gauge M204.064 — Analogue depth gauge with interchangeable pin tip, 0–200 mm, DIN 862 (Metav IndustryLine) The Depth Gauge M204.064 is an analogue depth caliper designed for machine‑shop and metalworking tasks, offering a 0–200 mm measuring range and a bottom vernier graduation of 0.05 mm for repeatable depth measurements. Stainless steel with matt-chrome scale Interchangeable pin-tip measuring rod Nonius 0.05 mm bottom graduation Conforms to DIN 862 for workshop use Accurate depth control that fits the workshop routine This depth caliper is engineered as a Standard-range instrument (0–200 mm), which covers the everyday requirements of machine and metalworking. The analogue nonius with a bottom graduation of 0.05 mm (1/20 mm) provides clear, verifiable readings for tasks where repeatability matters more than submicron resolution. Compliance with DIN 862 ensures that readings can be compared against recognised workshop tolerances, supporting efficient quality checks and reducing rework. The balanced combination of range and stiffness makes this gauge suitable for common assemblies, fixtures and small to medium components. Practical design for recessed and step measurements Equipped with an interchangeable pin tip and an extendable measuring rod, the tool adapts easily to a variety of recesses, pockets and stepped features. The body is made from stainless steel, while the scale and vernier are matt‑chrome plated, reducing surface glare and improving legibility under workshop lighting. At around 0.2 kg, the instrument is light enough for frequent handheld use yet rigid enough to keep readings stable. These design choices support faster inspection cycles and minimise handling errors during routine depth measurement tasks. Readability, care and benefits for everyday inspection The analogue layout keeps operation straightforward: the main scale indicates millimetres and the bottom vernier resolves to 0.05 mm, allowing technicians to perform quick checks without reliance on batteries or electronics. The simplicity of the mechanism reduces downtime and maintenance, while basic care — keeping the sliding faces clean and avoiding impacts — preserves accuracy. For operations seeking reliable gauging without excessive complexity, this depth caliper delivers consistent results and integrates smoothly into existing inspection workflows. Contact Metav Werkzeuge today to discuss how the Metav IndustryLine M204.064 can streamline depth checks in your workshop or to request tailored application guidance. Technical data SKU: M204.064 GTIN: 4054469102696 Tariff number: 90173000 Standard: DIN 862 Type: analogue depth gauge Material: stainless steel, matt‑chrome plated scale and vernier Facts Range: 0–200 mm Resolution: 0.05 mm (nonius 1/20 mm) Weight: 0.2 kg Bridge length: 100 mm eClass: 21170349 Special features Interchangeable pin‑tip measuring rod Bottom vernier for depth reads Suitable for machine‑shop and metalworking inspection FAQ How precise is the depth measurement with this instrument? The depth caliper provides a bottom vernier resolution of 0.05 mm (nonius 1/20 mm); as an analogue gauge conforming to DIN 862, it is suitable for standard workshop tolerances and repeatable depth checks with clear, verifiable readings. Can the measuring tip be adapted for narrow or deep recesses? Yes — the instrument features an interchangeable pin tip and an extendable measuring rod, enabling measurements in narrow pockets, bores and stepped features without loss of stability. Is this depth gauge suitable for everyday machine‑shop use? The gauge is classified in the Standard range (0–200 mm), covering the common requirements of machine and metalworking and offering a practical balance of reach, stiffness and one‑hand operation. Does the instrument require batteries or electronic calibration? No; this is an analogue depth gauge with a mechanical nonius. Readings are taken visually from the main scale and vernier, avoiding reliance on batteries or electronic components. What identifiers should be used when ordering or specifying this tool? Reference the Metav IndustryLine Depth Gauge M204.064, SKU M204.064, GTIN 4054469102696 for clear identification and procurement. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of the combination of IP67 protection, carbide-tipped measuring faces and 0.01 mm resolution for reliable workshop measurements; the robust stainless‑steel construction and protective case keep accuracy consistent in daily use. Order the digital caliper directly via Metav Werkzeuge or contact our consultants for product matching and delivery options. Digital Caliper M216.160.N — 300 mm, carbide-tipped, IP67 (Metav IndustryLine) Digital Caliper M216.160.N — a standard‑range precision measuring instrument for workshop and industrial metrology, featuring carbide measuring faces and a sealed design for use in harsh environments Digital display with MODE and SET buttons Carbide-tipped measuring faces for wear resistance IP67 protection for dust and temporary immersion Delivered in a protective case for transport and storage Reliable accuracy for everyday workshop tasks The caliper is designed to deliver consistent results in production and inspection environments: 0.01 mm resolution combined with a stated accuracy of ±0.03 mm provides measurable confidence for typical machining and assembly tasks. Conformity with DIN 862 ensures that the instrument meets recognised mechanical caliper standards, while the stainless‑steel, hardened frame maintains dimensional stability during repeated use. The numeric readout with MODE and SET simplifies switching between units and functions, reducing measurement time and potential transcription errors. Robust construction and protection that reduce downtime A sealed enclosure with IP67 protection prevents dust ingress and allows temporary immersion, making the caliper suitable for workshops where coolant mist or swarf is present. Carbide-tipped measuring faces give substantially higher wear resistance than plain steel jaws, extending service life in heavy-use applications. The hardened construction and the included protective case reduce the risk of accidental damage during transport and storage, helping to maintain calibration and minimise interruptions to production. Versatile measuring functions for a broad range of tasks This instrument supports 4‑fold measurement capability — outside, inside, depth and step measurements — enabling a single tool to handle the most common dimensional checks. The square depth gauge (3.7 × 1.3 mm) and 60 mm jaw length allow access to confined features and stepped components, bridging workshop convenience with the reach needed for many assemblies. As a standard‑range device (0–300 mm), it occupies the universal middle ground between compact and large calipers, offering a balance of reach, stiffness and one‑hand operation suited to machine shops and maintenance departments. Contact Metav Werkzeuge today for tailored advice on how the Metav IndustryLine Digital Caliper M216.160.N can integrate into existing inspection workflows and for information on delivery from our Emmerich hub Technical Data Article number: M216.160.N GTIN: 4054469178899 Tariff number: 90173000 Brand: Metav IndustryLine Facts Measuring range: 0–300 mm Resolution: 0.01 mm (0.0005 in) Accuracy: ±0.03 mm Weight: 1 kg Jaw length: 60 mm Special features Material: hardened stainless steel Measuring faces: carbide-tipped Protection class: IP67 Standard: DIN 862 Display: digital with MODE and SET buttons Depth gauge: square, 3.7 × 1.3 mm Measuring functions: outside, inside, depth, step Delivered in protective case FAQ What measurement functions does this caliper support? The Metav IndustryLine digital caliper supports outside, inside, depth and step measurements, providing four measurement modes for common workshop tasks. Is the caliper suitable for use in wet or dusty environments? Yes. The caliper’s IP67 rating ensures resistance to dust ingress and temporary immersion, making it suitable for use where coolant spray or fine particles are present. What level of precision can be expected from this instrument? The instrument offers 0.01 mm resolution with a stated accuracy of ±0.03 mm, which is appropriate for standard machining, inspection and assembly operations. Are the measuring faces resistant to wear? Yes. The caliper features carbide-tipped measuring faces, which significantly improve wear resistance compared with plain steel jaws. Does this caliper comply with recognised standards? The device is manufactured according to DIN 862, aligning with established mechanical caliper requirements for workshop use. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

The combination of robust IP67 protection, an inductive measuring system and a 0.01 mm display resolution delivers dependable depth measurement for everyday workshop control; benefit from fast, repeatable readings and corrosion‑resistant construction. Order via Metav Werkzeuge or contact our consultants for specification advice and prompt supply. Digital depth gauge M218.122.D — 0–300 mm range, IP67 protection Digital depth gauge M218.122.D provides precise depth measurement for machine shops and quality control, designed as a rugged industrial instrument for standard workshop tasks IP67 protection against dust and water immersion Inductive measuring system for long service life 0.01 mm display resolution for fine control Hardened stainless steel construction Complies with DIN 862 for workshop metrology Precise readings that fit the workshop routine The instrument is built around an inductive measuring system and a standard 0–300 mm range, classifying it as a workshop‑standard depth gauge that balances reach and stiffness. With a display resolution of 0.01 mm, the device supports repeatable checks in production and incoming‑goods inspection; the numeric step size is explained on the display and allows operators to distinguish between tolerances comfortably. Compliance with DIN 862 ensures the unit meets recognised dimensional metrology requirements, so results integrate easily into existing QC procedures. Durable construction for harsh working environments A hardened stainless steel body and an IP67 rating protect the instrument from coolant, chips and dust, reducing measurement downtime and prolonging service life. The digital readout runs from a replaceable 3 V CR 2032 battery and the control panel offers MODE, INC, HOLD and 0/ON keys for straightforward handling during repetitive tasks. At approximately 0.6 kg, the gauge is substantial enough to feel stable while remaining portable for bench or on‑machine checks. Simple operation, tailored to industrial use The depth gauge is supplied without data output, which suits inspection stations that record values manually or with stand‑alone documentation procedures. The inductive sensor reduces sliding contact wear compared with mechanical racks, maintaining accuracy over prolonged use. As a Standard class instrument, it is particularly well suited to general metalworking, fixture checks and routine quality control where robust, quick depth measurements are required without the complexity of automatic data transmission. Contact Metav Werkzeuge for specialist advice on integrating the M218.122.D into your workshop workflow and to arrange supply from our Emmerich warehouse Technical data Article number: M218.122.D GTIN: 4054469182957 Label: Digital-Tiefenmaß 300 x 150 mm, IP67 Ohne Datenausgang Brand: Metav IndustryLine Facts Measurement range: 0–300 mm Resolution: 0.01 mm Protection rating: IP67 Weight: 0.6 kg Battery: 3 V CR 2032 Bridge: 150 mm Measuring system: inductive Compliance: DIN 862 Special features Hardened stainless steel construction Digital display with MODE, INC, HOLD, 0/ON buttons No data output (without interface) Robust sensor technology for extended service life FAQ How accurate is the measurement on this digital depth gauge? The device provides a display resolution of 0.01 mm and conforms to DIN 862, offering accuracy and repeatability suitable for routine workshop inspection with clear numeric feedback. Is the gauge suitable for use on a busy shop floor? Yes. The IP67 rating and hardened stainless steel construction make the unit resistant to dust and coolant exposure, so it is appropriate for machine‑shop environments. Can measurement data be exported to a computer or SPC system? This model is supplied without data output, so readings are intended for manual recording or integration into non‑automated inspection processes. What battery does the instrument use and is it easy to replace? The gauge uses a standard 3 V CR 2032 coin cell, which is easily replaced in the field to minimise downtime. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of the combination of sturdy monoblock construction, hardened stainless-steel measuring surfaces and a 0–500 mm range with 0.02 mm resolution for reliable workshop measurements; order directly via Metav Werkzeuge or request advice from our consultants for specification matching. M201.305 Workshop Caliper with Point — 0–500 mm, hardened stainless steel The M201.305 Workshop Caliper with Point is a robust analogue monoblock caliper designed for workshop use, enabling external, internal and step measurements on components up to 500 mm. Workshop caliper M201.305 by Metav IndustryLine Monoblock construction for increased stiffness Fine-adjustment spindle for precise positioning Suitable for outside, inside and step measurements Reliable long-span measurements for fixtures and assemblies The monoblock frame and hardened measuring faces give this caliper dimensional stability across its 0–500 mm span, placing it in the mid‑range class suited to fixture, mould and general workshop measurement tasks. The monoblock design reduces torsion and improves reproducibility compared with split‑beam designs, which means measurements stay consistent when handling larger components. The matt‑chromed scale resists glare, helping operators read values more reliably under workshop lighting; the caliper is thus engineered for repeatable results rather than delicate, short‑range lab work. Clear analogue readout with fine positioning for accurate setting This analogue instrument combines a dual nonius arrangement (top scale in 1/1000" and bottom scale in 1/50 mm) with a fine‑adjustment spindle, enabling careful alignment before taking a reading. The bottom nonius corresponds to a 0.02 mm incremental scale, which is appropriate for industrial workshop tolerances and typical quality control tasks. The fine adjustment lets operators close the jaws gently and set the measuring faces without overshoot, improving the effective usability of the mechanical scale and reducing measurement scatter caused by manual handling. Practical features that support workshop workflow Built for everyday use, the caliper includes a 150 mm long jaw profile for deeper reach when measuring recesses or stepped features, and the jaw geometry is optimised for external and internal contact points as well as step gauging. The instrument is supplied in a transport case to protect it during storage and transit, and it is finished in hardened stainless steel with a matt chrome scale for durability in harsh workshop environments. The device is manufactured to the maker’s factory standard and is intended as a reliable, serviceable tool for production and maintenance departments that need a robust mechanical measuring solution. Contact Metav Werkzeuge for tailored advice on integrating the M201.305 workshop caliper into measurement routines and to arrange supply direct from Emmerich. Technical data Article number: M201.305 GTIN: 4054469101279 ECLASS: 21170344 SKU: M201.305 Facts Measuring range: 0–500 mm Resolution: 0.02 mm (1/50 mm) Jaw length: 150 mm Nonius scales: 1/1000" (top) and 1/50 mm (bottom) Special features Monoblock construction Hardened stainless‑steel measuring faces Matt‑chromed scale Fine‑adjustment spindle Analogue caliper with point for external, internal and step measurements Supplied in a protective transport case Manufacturer’s factory standard (Werksnorm) FAQ What measurement range does the caliper cover? The M201.305 workshop caliper covers a measuring range of 0–500 mm, providing the reach required for medium‑sized components. How fine is the resolution and how is it read? Resolution is 0.02 mm (1/50 mm) on the metric nonius; the top nonius offers inch‑based graduations at 1/1000". Readings are taken from the analogue scales with the aid of the fine‑adjustment spindle for precise setting. Is the caliper suitable for rough workshop environments? Yes, the caliper is manufactured in hardened stainless steel with a matt‑chromed scale and comes in a transport case, making it suitable for routine workshop use and transport. Which measurement types are supported by the instrument? The caliper supports external, internal and step measurements, with jaw geometry and a long jaw profile for deeper reach when needed. Who supplies and is responsible for this caliper? Metav IndustryLine supplies the M201.305 workshop caliper and can advise on integration into workshop measurement procedures. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of a compact, workshop-ready depth gauge that combines stainless steel construction, a vernier resolution of 0.05 mm, and an interchangeable pin tip for versatile depth measurement; order the device directly via Metav Werkzeuge or consult our specialists for application guidance. M204.066 – Depth gauge (0–80 mm), stainless steel, DIN 862 by Metav IndustryLine The M204.066 is a stainless steel depth gauge with an interchangeable pin tip, designed for precise depth measurements in fine mechanical and general workshop applications up to 0–80 mm. Stainless steel with matt chrome scale Interchangeable pin tip for versatile depths Nonius 1/20 mm for 0.05 mm resolution Supplied in protective case Reliable, measurable precision for daily workshop tasks The mechanical vernier design delivers a 0.05 mm reading step, indicated by the Nonius (1/20 mm) system, making the instrument suitable where consistent, reproducible depth readings are required. The vernier mechanism converts fine adjustments into a clear, repeatable scale reading; this analogue arrangement is robust against electromagnetic interference and requires no batteries, which reduces downtime and maintenance complexity. The design supports routine inspection and set-up work where traceable, simple measurements are preferred over digital overlays. Robust construction that stands up to workshop use Constructed from stainless steel with a matt chrome scale and vernier, the gauge complies with DIN 862, ensuring dimensional reliability and interchangeability across standardised measuring tools. The corrosion-resistant material and plated scale preserve legibility and functional life in busy shop environments, while the compact build minimises flex and improves handling for single-handed operation. This combination of materials and standard conformity sustains long-term performance and reduces the need for frequent replacements. Versatility through the interchangeable pin tip and measured reach Equipped with an interchangeable pin tip, the instrument adapts quickly to varying depth profiles and blind features that are otherwise difficult to reach. The detachable measuring rod allows modification of the contact geometry without changing the whole tool, so different countersink depths or stepped features can be measured with the same instrument. The practical layout expedites measurement sequences and keeps tool inventory lean while maintaining measurement integrity. Compact format tailored to fine and detailed measurement work With a maximum range of 0–80 mm, this device falls into the Micro class of measuring instruments, where compactness and stiffness are prioritised for fine mechanical tasks. The small footprint makes it ideal for clock and instrument makers, prototype shops and precision assembly stations where short-range depth checks are frequent. The compact dimensions combine reach and rigidity, ensuring that short-span repeatability remains high even when access is limited. Contact Metav Werkzeuge in Emmerich for delivery and technical advice on the M204.066 depth gauge: info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: M204.066 GTIN: 4054469164144 Category: Calipers / Depth gauge Standard: DIN 862 Facts Measuring range: 0–80 mm Resolution (vernier): 0.05 mm Vernier type: 1/20 mm (bottom) Analog instrument (mechanical vernier) Special features Material: stainless steel with matt chrome scale and vernier Interchangeable pin tip and removable measuring rod Supplied in protective case for transport Suitable for compact, fine‑mechanical and workshop inspection tasks FAQ What measuring range does the gauge cover? The measuring range is 0–80 mm, making the instrument suitable for short‑to‑medium depth tasks typical of workshop and fine‑mechanical work. What reading resolution and vernier type are provided? The vernier is a 1/20 mm type, corresponding to a reading step of 0.05 mm, which is typical for analogue instruments in industrial use. Is the instrument corrosion resistant? Yes, the body and scale are made from stainless steel with a matt chrome finish that protects the scale and vernier against workshop conditions. Can the tip be adapted to different measurement tasks? The interchangeable pin tip and removable measuring rod allow quick adaptation for blind holes, stepped depths and special contact geometries without replacing the whole instrument. Does the product conform to industry standards? The tool is manufactured in accordance with DIN 862, ensuring consistency with standard workshop measuring equipment. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Compact, corrosion‑resistant construction and a simple locking lever deliver repeatable results for precision micro‑work; combined with a fine 0–90 mm measuring range and 0.1 mm reading, this instrument streamlines small‑part inspection and assembly. Order directly via Metav Werkzeuge or consult our specialists for application advice. Caliper M201.007 — precision caliper, 0–90 mm range, 0.1 mm resolution (Metav IndustryLine) The Caliper M201.007 is a compact precision tool for specialist fine‑mechanical measurements, designed for external and depth checks where small jaws and a light, stiff frame make handling and repeatable readings straightforward Compact 0–90 mm measuring range 0.1 mm reading for quick verification Stainless steel construction for durability Curved measuring jaws for small contours Locking lever for repeatable measurements Precise micro‑measurements with clear benefits This caliper offers a 0–90 mm measuring range classified as micro, which is ideal where reach is limited but stiffness and precision are essential. The 0.1 mm vernier reading provides a straightforward, verifiable value for common inspection tasks; as an analogue instrument it requires no batteries and gives immediate, tactile feedback. The stainless steel construction resists workshop environments while the curved jaws allow secure contact on small or rounded components, reducing the need for supplementary fixtures and saving set‑up time. Designed for consistent workflow and easy handling A low mass of around 0.1 kg and a compact jaw length of 23 mm make the instrument easy to manoeuvre in one hand during repetitive checks. The integrated locking lever fixes the slider for transfer measurements and repeatability, turning individual readings into reproducible data points on the shop floor. For quick depth checks and external measurements the simple scale and clamp arrangement reduce operator variation, improving throughput without complex procedure changes. Practical applications and workshop suitability Classified for micro measurement work, this caliper suits fine‑mechanical workshops, small component inspection and specialist production tasks that value compactness over long reach. The curved tips help when measuring small bores or contours, while the robust stainless construction supports daily use. As a dedicated verification tool for short spans, it complements larger calipers in a metrology kit and serves as a reliable go‑to for routine dimensional checks. For precision micro‑work choose the Metav IndustryLine Caliper M201.007 — contact Metav Werkzeuge for tailored advice at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: M201.007 GTIN: 4054469183206 Weight: 0.1 kg Material: stainless steel Measuring range: 0–90 mm Resolution: 0.1 mm Jaw length: 23 mm Special feature: locking lever Jaw tips: curved Facts Measuring range max: 90 mm Measuring range min: 0 mm Resolution/display: 0.1 mm Weight: 0.1 kg Jaw length: 23 mm Special features Suitable for external and depth measurements Curved measuring jaws for small contours Stainless steel construction Category: Special caliper Range class: Micro (max 10–100 mm) FAQ What accuracy can be expected from this caliper? The Caliper M201.007 from Metav IndustryLine provides a vernier reading at 0.1 mm resolution, suitable for reliable shop‑floor verification and everyday dimensional checks. Which measurement types are possible with this instrument? External and depth measurements are supported by the design; the curved jaws also assist with measurements on small contours and rounded features. Is the caliper resistant to corrosion in a workshop environment? Yes, the stainless steel construction of the Caliper M201.007 offers good resistance to typical workshop conditions and frequent handling. Does the instrument include a calibration certificate? This product is supplied without an ISO 17025 calibration certificate by default; specific calibration services can be arranged separately if required. What advantages does the locking lever provide in routine use? The locking lever fixes the slider for transfer and repeat measurements, improving repeatability and reducing operator‑induced variation during inspection runs. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com