Where are Mahr calipers manufactured?

Take advantage of the carbon‑fibre construction, 100 mm reach and compatibility with calipers that have a jaw thickness of 8 mm for consistent external groove measurements; order this insert directly via Metav Werkzeuge or consult our specialists for application advice. Insert for External Groove Measurement, 100 mm — carbon‑fibre accessory for digital universal calipers (Metav IndustryLine) The Insert for External Groove Measurement, 100 mm is a purpose‑built attachment for carbon‑fibre digital universal calipers that extends measurement capability to external grooves with consistent handling and fit. Carbon‑fibre construction for stable readings 100 mm reach for extended groove access Fits calipers with 8 mm jaw thickness Lightweight 0.2 kg for easy handling Reliable groove measurement with extended reach Designed for precise work on external grooves, the 100 mm insert provides an extended reach that simplifies measurement of grooves and recesses that standard jaws struggle to access. The accessory is intended for use in workshop and production environments where repeatable external groove measurement is required. Compatibility with digital universal calipers ensures the adapter can be integrated into established measuring workflows without altering the instrument’s basic operation. Stable performance thanks to carbon‑fibre design Made from carbon‑fibre, the insert combines low mass with structural stiffness, supporting steady contact during measurement and minimising thermal influence on short inspection runs. The lightweight nature (0.2 kg) reduces additional inertia on the caliper, helping operators maintain consistent handling over multiple measurements. These material benefits translate into practical advantages at the bench: easier manoeuvring into grooves and reduced risk of deflection compared with heavier attachments. Quick integration with digital universal calipers The insert is engineered to fit jaws with a thickness of 8 mm, delivering a secure seating and reliable transfer of the measuring surfaces to the caliper’s slide. Installation is straightforward and restores the caliper’s functionality for external groove checks without the need for special fixtures. As an accessory for digital universal calipers, it preserves the instrument’s measurement workflow while extending its application range. Practical accessory for everyday workshop use As a workshop accessory from Metav IndustryLine, the insert supports routine inspection and maintenance tasks where grooves must be checked quickly and reliably. Its design focuses on practicality: accessible reach, low weight and direct compatibility with common caliper jaws. For purchasing and logistics, Metav Werkzeuge supplies this accessory alongside a broad range of measuring tools, providing a single‑source option for workshops aiming to keep operations efficient and supplies standardised. For specification advice or to request the Metav IndustryLine 100 mm insert, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitability for specific calipers and applications Technical data Article number: M217.366 GTIN: 4054469183268 Manufacturer: Metav IndustryLine Facts Overall length: 100 mm Width: 16 mm Weight: 0.2 kg Compatible jaw thickness: 8 mm Special features Material: carbon‑fibre Application: external groove measurement Compatible with digital universal calipers Category: workshop calipers accessory eClass: 21170344 FAQ What is this insert used for? The insert is intended for external groove measurement; the Metav IndustryLine insert M217.366 extends the reach of digital universal calipers for groove and recess inspection. Will this accessory fit my caliper? It fits calipers with a jaw thickness of 8 mm; compatibility with a specific digital universal caliper is confirmed when the jaw thickness and mounting geometry match the M217.366 design. What material is the insert made from? The insert is manufactured from carbon‑fibre, chosen for its low mass and structural stiffness to support stable measurements. How long is the insert and how heavy is it? The insert measures 100 mm in overall length and has a mass of 0.2 kg, providing extended reach without significant additional weight. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of precise internal groove measurement with a lightweight, carbon-fibre construction and straightforward compatibility with digital workshop calipers; the accessory ensures stable readings in confined spaces. Order the insert directly via Metav Werkzeuge or consult our specialists for application advice. M217.367 — Insert for internal-groove measurement, 100 mm, carbon-fibre (Metav IndustryLine) A M217.367 insert engineered for accurate internal groove measuring on digital workshop calipers, offering a 100 mm measuring length and compatibility with 8 mm jaw thickness. 100 mm measuring insert for internal grooves Carbon-fibre construction for low thermal drift Compatible with calipers having 8 mm jaw thickness Lightweight 0.2 kg for easy handling Precision where space is limited The accessory converts a standard caliper into a specialised tool for internal groove measurement, enabling reliable checks in narrow bores and channels. Built from carbon-fibre, the insert reduces thermal expansion compared with metallic alternatives, which supports measurement stability during routine workshop use. With a 100 mm measuring length, the component is particularly suited to confined workpieces where repeatable positioning matters. The lightweight design keeps inertia low and simplifies one-person operation while maintaining a steady reference for the caliper sensor. Designed for repeatable workshop measurements The adapter fits to digital universal workshop calipers with a jaw thickness of 8 mm, providing a solid mechanical interface that keeps alignment consistent across successive measurements. Its 0.2 kg mass combines handling convenience with enough substance to avoid unwanted movement during contact measurement. Being an accessory for digital calipers, the part preserves the display resolution and electronic readout of the host instrument, allowing the user to retain the precision benefits of electronic measurement without adapting the measuring routine. Practical integration into quality workflows Classified for compact, micro-range applications up to 100 mm, this insert is ideal for workshop quality control tasks where internal grooves, slots and recesses must be verified quickly and reliably. The accessory supports straightforward inspection routines and fits seamlessly into inspection benches and portable measuring setups. For production environments that demand reproducible checks of groove geometry, the combination of carbon-fibre construction and purpose-shaped measuring faces reduces environmental influence and helps standardise results across shifts. For groove-specific measuring tasks, choose the Metav IndustryLine M217.367 insert and contact Metav Werkzeuge in Emmerich for tailored advice or ordering: info@metav-werkzeuge.com / +49 2822 7131930 Technical Data Article number: M217.367 GTIN: 4054469183275 Manufacturer: Metav IndustryLine Facts Measuring length: 100 mm Measuring range minimum: 50 mm Weight: 0.2 kg Jaw thickness compatibility: 8 mm Width: 16 mm Special features Carbon-fibre construction Application: internal measurement Suitable for digital workshop calipers Category: workshop caliper accessory FAQ How is the insert mounted to a caliper? The M217.367 insert is designed to sit on calipers with an 8 mm jaw thickness, forming a secure mechanical interface that aligns the measuring faces for internal groove checks. Can the insert remain attached during general measurements? The accessory is intended for dedicated internal groove tasks; while attachment is mechanically stable, removal is recommended when performing standard outside measurements to avoid interference. Which caliper types are compatible with this accessory? Compatibility is with digital universal workshop calipers featuring an 8 mm jaw thickness; the insert preserves the caliper’s electronic readout and measuring functionality. Is the insert suitable for measuring deep slots and narrow grooves? Yes, the 100 mm measuring length and narrow profile make the accessory suitable for confined grooves and slots where direct access is limited. Does the carbon-fibre construction affect measurement stability? Carbon-fibre reduces thermal expansion compared with many metals, supporting more stable results in varying workshop temperatures when used with the caliper’s electronic display. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of the lightweight carbon-fibre construction together with the 150 mm measuring length to speed external measurements while reducing hand fatigue; order the attachment directly via Metav Werkzeuge or ask our consultants if any clarification is needed. External measuring jaw M217.364.2 — 150 mm carbon-fibre attachment for digital universal calipers (Metav IndustryLine) A External measuring jaw M217.364.2 designed as a precision attachment for external measurements on digital universal calipers, offering a light, stiff alternative for routine workshop checks. Carbon-fibre construction, high stiffness 150 mm measuring length for external use Fits calipers with 8 mm jaw thickness Weight 0.2 kg for easy handling Faster, more reliable external measuring in everyday workflows The carbon-fibre construction delivers a high stiffness-to-weight ratio that reduces operator fatigue and improves repeatability during repetitive tasks. By replacing heavier jaws with a carbon-fibre attachment, measurement cycles become more efficient because handling is easier and less brace force is required. The 150 mm length provides a practical reach for common external dimensions while remaining rigid enough to avoid bending under normal workshop use. This results in consistently reproducible measurements and a noticeable reduction in handling time during batch checks. Straightforward fitment and workshop practicality Designed specifically for calipers with a jaw thickness of 8 mm, the accessory mounts cleanly to compatible digital universal callipers and is intended for rapid swap‑out without additional tools. The slim profile and lightweight build make it particularly suitable for technicians who need to switch between internal and external measuring setups frequently; the reduced mass lowers the risk of accidental slippage and helps maintain alignment during contact. Clear mechanical fitment reduces setup time, supporting faster throughput on assembly and inspection benches. Material benefits that support precision and durability The choice of carbon-fibre gives a corrosion‑resistant alternative to metal jaws and maintains dimensional stability under normal workshop conditions. Its low weight contributes to gentler contact forces, which helps preserve delicate surfaces and reduces marking on softer workpieces. The design focuses on practical robustness: a stiff, slim geometry for external measurement combined with a compact footprint that does not obstruct access to confined areas. Where repeatable, low‑effort external gauging is required, this attachment offers a measurable improvement in handling and operator comfort. Contact Metav Werkzeuge for personalised advice on integrating the Metav IndustryLine 150 mm carbon-fibre external measuring jaw into the workshop setup, or to request detailed compatibility confirmation from our specialists in Emmerich. Technical data Article number: M217.364.2 Manufacturer: Metav IndustryLine Category: Workshop calipers accessory Facts Length: 150 mm Weight: 0.2 kg Width: 16 mm Compatible jaw thickness: 8 mm Special features Material: Carbon-fibre Intended use: External measurement (also suitable for internal checking depending on caliper setup) Designed for digital universal calipers Light, stiff construction for repeatable handling FAQ How does this attachment improve everyday measuring tasks? The carbon-fibre 150 mm measuring jaw reduces weight and operator fatigue while maintaining stiffness, so the Metav IndustryLine jaw helps achieve more consistent external measurements during repetitive checks. Is the jaw compatible with my caliper? Compatibility requires a jaw thickness of 8 mm; the M217.364.2 is specified to fit digital universal calipers that accept this dimension. Can this jaw be used for internal measurements as well? While optimised for external measurement, the design also allows internal checks in many setups when used with a suitably configured caliper and stable measuring technique. What care is recommended to preserve accuracy? Clean contact faces regularly and avoid impacts; the carbon-fibre construction is corrosion‑resistant but benefits from routine inspection to ensure alignment and damage‑free performance. What is the actual weight and size for handling considerations? The attachment weighs 0.2 kg and measures 150 mm in overall length with a 16 mm width, making it easy to handle for single‑operator tasks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of a lightweight, maintenance‑friendly measuring tool that delivers reliable workshop results: accurate 0.05 mm graduations, a practical 150 mm measuring range and an integrated depth gauge ensure routine tasks run smoothly. Order directly via Metav Werkzeuge or consult our specialists for bulk supply and stock details. Plastic Caliper 150 mm — analogue vernier, 0.05 mm reading (Metav IndustryLine) The Plastic Caliper 150 mm is an analogue measuring instrument designed for general workshop and maintenance use, providing basic outside, inside and depth measurements with a compact, easy‑to‑handle format Lightweight plastic construction Vernier reading 0.05 mm Integrated depth gauge 150 mm range for standard tasks Standard range accuracy for everyday workshop use The instrument is built around a classic analogue vernier design with a 0.05 mm graduation, making it suitable for routine checks and component matching in production environments. With a 150 mm measuring span the device sits in the Standard class of calipers, offering the best compromise between reach and stiffness for everyday tasks. The vernier scale permits readable, immediate results without batteries, and the specification aligns with common workshop tolerances, so the tool functions as a dependable rough‑to‑medium accuracy measuring solution. Practical handling and clear measuring functions A plastic body reduces weight and eliminates corrosion risks common to metal calipers, while the integrated depth gauge extends functionality beyond simple outside and inside measurements. The shorter jaw length of 40 mm keeps the instrument torsion‑resistant and easy to manoeuvre in confined spaces. The analogue layout keeps training time low and service needs minimal; basic maintenance is limited to keeping the sliding surfaces clean and lightly lubricated, which suits busy production benches and teaching environments where frequent, uncomplicated checks are required. A cost‑effective, low‑maintenance choice for standard tasks Constructed for routine operation rather than high‑precision metrology, this caliper offers a practical balance of economy and functionality. The light construction and simple mechanics mean fewer wear parts and lower replacement costs across a workshop fleet. Metav IndustryLine supplies this model with the usual European distribution assurance from Emmerich, backed by broad stock availability for straightforward reordering and reliable lead times for trade customers. Contact Metav Werkzeuge in Emmerich for procurement details or to discuss a volume requirement — info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: M201.114 GTIN: 4054469182469 Label: Messschieber aus Kunststoff 150 mm Ablesung 0,05 mm Manufacturer: Metav IndustryLine Facts Measuring range: 0–150 mm Reading / resolution: 0.05 mm Weight: 0.2 kg Jaw length: 40 mm Analogue vernier: yes Special features Material: plastic Depth measurement: integrated depth gauge Type: analogue caliper for workshop use Suitable application: standard workshop and maintenance tasks FAQ What measuring range does this caliper cover? The caliper covers a measuring range of 0–150 mm and is classified in the Standard range for general workshop applications. What reading accuracy can be expected? The instrument provides a vernier reading of 0.05 mm; this makes it suitable for routine checks and component matching where medium‑level precision is sufficient. Is depth measurement available with this model? Yes, the caliper includes an integrated depth gauge for simple depth and step measurements in addition to outside and inside dimensions. Is the plastic construction suitable for metalworking tasks? The plastic construction offers corrosion resistance and low weight, making the caliper appropriate for general workshop, maintenance and training tasks; for high‑precision or heavy‑duty measurement in metalworking, higher‑specification metal calipers would be recommended. Which brand and SKU identify this product? This item is supplied under Metav IndustryLine with the article number M201.114 and GTIN 4054469182469. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of a robust, workshop‑ready tool that combines a 200 mm measuring range with IP67 protection and a hardened stainless‑steel construction to ensure reliable routine checks; order directly via Metav Werkzeuge or consult our specialists for detailed application advice. Digital caliper M216.162.D — 200 mm precision caliper with IP67 protection (Metav IndustryLine) The Digital caliper M216.162.D is a 200 mm precision measuring instrument, engineered for standard workshop and quality‑control tasks in accordance with DIN 862, offering fast digital readings and durable handling for everyday industrial use. 200 mm measuring range, DIN 862 compliant IP67 dust and water resistant Hardened stainless‑steel construction Digital readout 0.01 mm resolution Consistent accuracy for workshop and inspection routines The instrument is designed as a standard‑range caliper (measuring range up to 200 mm), which provides the ideal compromise between reach and stiffness for general machine‑shop and metalworking applications. With a display resolution of 0.01 mm and an accuracy of ±0.03 mm, the device supports reliable dimensional checks to the expectations of production control; compliance with DIN 862 gives a clear normative basis for acceptance in inspection protocols. The compact form factor and ergonomic jaw geometry make repeated checks efficient and reproducible, reducing cycle time in routine quality tasks. Built to withstand industrial conditions Constructed from hardened stainless‑steel, the caliper resists wear and maintains jaw geometry under frequent use, while the IP67 ingress rating protects the electronics from dust and immersion, extending service life in harsher shop environments. The moderate mass (0.4 kg) balances stability with easy handling, and the robust finish helps prevent corrosion in mixed‑material workshops. These attributes translate into lower downtime and fewer tool replacements, supporting steady production throughput. Fast digital workflow and four‑way measurement capability The calibrated digital display features practical controls (including INC, NODE and HOLD) for immediate readings and repeatable settings; the unit runs on a 3 V CR2032 battery and includes automatic switch‑off to preserve power during intermittent use. The caliper supports inside, outside, depth and step measurements, making it a versatile instrument for component inspection, fixture set‑up and quick verification tasks. The clear readout and simple operation reduce operator error and speed decision‑making at the inspection bench. Contact Metav Werkzeuge today to discuss how the Metav IndustryLine caliper with IP67 protection can be integrated into your quality workflow and to request tailored advice from our specialists. Technical data Article number: M216.162.D GTIN: 4054469182926 Manufacturer: Metav IndustryLine Key figures Measuring range: 0–200 mm Resolution: 0.01 mm Accuracy: ±0.03 mm Weight: 0.4 kg Jaw length: 50 mm Battery: 3 V CR2032 Protection class: IP67 Standard: DIN 862 Materials & features Hardened stainless‑steel construction Digital display with INC, NODE, HOLD and ON/OFF controls Automatic switch‑off function Four‑way measurement: inside, outside, depth and step measurements FAQ Is this caliper suitable for everyday workshop use? The M216.162.D from Metav IndustryLine is intended for standard workshop and inspection tasks, offering a 200 mm range and robustness suited to routine production checks. What measurement modes are available with this caliper? The instrument supports inside, outside, depth and step measurements, enabling versatile use across common inspection scenarios. How precise is the digital display? The digital display provides a resolution of 0.01 mm with an overall accuracy of approximately ±0.03 mm within the 0–200 mm range, consistent with standard digital caliper performance. How is the caliper powered and what about battery life? The caliper uses a 3 V CR2032 battery; the automatic switch‑off feature helps to extend battery life during intermittent use. Does the construction withstand workshop conditions like coolant splash or dust? Yes, the caliper features a hardened stainless‑steel body and an IP67 rating, offering resistance to dust ingress and temporary immersion, which is beneficial in demanding workshop environments. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of a compact, workshop‑ready design with a 0–25 mm measuring range and a Ø 2.5 mm round probe for accessible bore measurement; the integrated automatic switch‑off conserves the 3 V battery. Order the Digital depth gauge M218.091 directly via Metav Werkzeuge or ask our consultants if technical advice is needed. Digital depth gauge M218.091 – 0–25 mm, Ø 2.5 mm round probe (Metav IndustryLine) The Digital depth gauge M218.091 is a compact, battery‑powered instrument for precise depth measurement tasks in small‑part inspection and workshop use. Digital display with mm/inch and ABS function Automatic power-off to conserve battery Round Ø 2.5 mm depth probe for small bores Compact 0–25 mm range with 53 mm bridge Precise, compact depth measurement for fine tasks The instrument combines a clear digital display with a standard resolution of 0.01 mm and a stated accuracy of ±0.05 mm, making it suitable for routine workshop checks and quality control where repeatable results are required. The 0–25 mm measuring range places the device in the micro category for measuring tools, which is ideal for fine‑mechanical work and components with limited access. The round Ø 2.5 mm depth probe provides entry to narrow bores and recesses, while the 53 mm bridge supports stable alignment during measurement. The electronics include mm/inch, ABS and zero functions to facilitate quick conversion and reference setting. Lightweight handling and access to confined features Made from robust plastic, the gauge is deliberately lightweight at 0.35 kg, easing one‑handed operation and reducing operator fatigue during repetitive checks. The curved measuring faces and the small‑diameter probe permit measurements in confined cavities and stepped features without the need for additional fixtures. The compact dimensions and ergonomic form mean faster set‑up times on the shop floor and simpler handling for bench and assembly tasks. Where space is limited, the rounded probe and short measuring range enable accurate depth readings without overextending the instrument. Efficient operation, low running costs and dependable results Operation is straightforward thanks to a dedicated ON/OFF key and an automatic switch‑off that extends battery life; the gauge runs from a 3 V battery that is easy to replace. The ABS mode locks the reading to prevent drift when repositioning, saving time during comparative measurements. Routine cleaning of the measuring faces and careful handling of the probe maintain measurement quality; abrasive cleaning agents should be avoided to protect surfaces. Backed by Metav’s approach to accessible precision, the instrument offers a reliable combination of usability and measured performance for workshops and inspection stations. Contact Metav Werkzeuge for a tailored quotation or technical advice on the Metav IndustryLine M218.091; our Emmerich team is ready by e‑mail or phone. Technical data Article number: M218.091 GTIN: 4054469181431 Brand: Metav IndustryLine Facts Measuring range: 0–25 mm Resolution: 0.01 mm Accuracy: ±0.05 mm Bridge length: 53 mm Weight: 0.35 kg Special features Material: plastic Measuring faces: curved Measuring tip: Ø 2.5 mm round probe Power supply: 3 V battery Display functions: ON/OFF, ZERO, mm/inch, ABS Extra: automatic switch‑off FAQ What is the measuring range of this depth gauge? The Digital depth gauge M218.091 measures from 0 to 25 mm, classifying it in the micro range for fine‑mechanical and small‑part work. How accurate and precise are the readings? Readings are displayed with 0.01 mm resolution and the instrument specification lists an accuracy of ±0.05 mm for routine inspection tasks. Can the gauge measure inside small bores? Yes. The Ø 2.5 mm round probe is designed to access narrow bores and recesses for reliable depth checks with the Metav IndustryLine gauge. What functions are available on the digital display? The unit includes ON/OFF, ZERO, mm/inch conversion and ABS mode to lock reference readings, simplifying comparative and multi‑step measurements. Is the gauge suitable for repetitive workshop use? The lightweight plastic construction and automatic switch‑off make the gauge practical for frequent use; regular cleaning of the measuring faces is advised to ensure consistent results. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Benefit from the combination of IP54 protection, an absolute measuring system and four measuring modes for dependable workshop performance. Order the Digital Caliper M216.257 directly via Metav Werkzeuge or ask our consultants if needed. Digital Caliper M216.257 — 300 mm absolute digital caliper, IP54 (Metav IndustryLine) The Digital Caliper M216.257 is a robust workshop caliper designed for precise linear measurements in machining and quality control, offering an absolute measuring system and a protected enclosure for everyday industrial use Absolute measuring system for stable readings IP54 protection against dust and splashes 4-in-1: inside, outside, depth and step Stainless steel body with glass scale Consistent accuracy for shop-floor measurements The caliper is built around an absolute measuring system that delivers repeatable readings and reduces the need for frequent re-zeroing. With a stated accuracy of 0.03 mm and conformity to DIN 862, the instrument suits standard metrology tasks in machine shops and production control. The 300 mm measuring range classifies this tool as a Standard caliper, offering the best compromise between reach and rigidity for general workshop use. The four measuring modes — external, internal, depth and step — make the instrument polyvalent, simplifying inspection routines and reducing the number of separate gauges required on the bench. Robust construction for industrial environments Durability is addressed through a stainless steel body combined with a glass scale, which together resist wear while keeping the measuring surfaces stable. The enclosure rating IP54 protects the electronics from dust ingress and water splashes, permitting reliable use in tougher shop-floor conditions. A delivery case is included for transport and storage, helping to protect the caliper between shifts. At approximately 0.8 kg, the instrument balances solidity with handling comfort so that repetitive measuring tasks remain straightforward and controlled. Clear display, practical controls and data output The digital display is fitted with practical controls — on/off, 0/ABS, mm/inch and an Origin button — enabling fast switching between functions and measurement systems. Power is supplied by a 3 V CR2032 battery, providing long operating intervals for typical inspection workloads. For traceable data transfer, the caliper offers an RB 6 data output interface, allowing measured values to be recorded directly into data-collection systems or inspection software. The device is also usable with or without a drive roller, increasing compatibility with diverse setup arrangements on measuring stations. Practical fit for production and quality assurance Intended for workshop metrology, the tool supports routine dimensional control, first-article inspections and rework verification. Its combination of standards compliance, multiple measuring functions and secure data output reduces measurement-related downtime and streamlines documentation. The construction and interface choices mean the caliper integrates readily into existing inspection procedures, while the Standard measuring length remains a versatile option across general engineering, maintenance and small-batch manufacturing environments. Contact Metav Werkzeuge to request further technical details or to procure the IP54 Digital Caliper M216.257 directly from our Emmerich stock Technical data Article number: M216.257 GTIN: 4054469182575 Label: Digital Caliper 300 mm, IP54 DIN 862 Manufacturer: Metav IndustryLine Numbers / Core technical data Measuring range: 0–300 mm Accuracy: 0.03 mm Display resolution: 0.03 mm Weight: 0.8 kg Jaw length: 60 mm Battery: 3 V CR2032 Protection class: IP54 Special features / Versions Absolute measuring system Conforms to DIN 862 4-in-1 measurement: external, internal, depth, step Data output: RB 6 Digital display with ON/OFF, 0/ABS, mm/inch, Origin Stainless steel body with glass scale Supplied in transport case Usable with or without drive roller FAQ What measurement range does this caliper cover? The Digital Caliper M216.257 covers a measuring range of 0–300 mm, classifying it as a Standard caliper suitable for general workshop tasks. How accurate is the instrument for daily inspections? The instrument provides an accuracy of 0.03 mm and is manufactured to comply with DIN 862, making it appropriate for standard machine‑shop quality checks. Which measuring functions are available? The caliper supports four functions: external, internal, depth and step measurements, enabling broad use across inspection routines. Is the caliper suitable for dusty or damp shop conditions? Yes, the device carries an IP54 rating, so the electronics are protected against dust and splashing water for reliable shop‑floor operation. How are readings transferred to a PC or data logger? Readings can be exported via the RB 6 data output; the caliper’s digital interface and simple controls facilitate integration with data‑collection systems. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Taking advantage of durable carbide tips and straightforward compatibility with the 201.274–201.277 series provides reliable, repeatable scribing for workshop layout tasks; the robust design minimises downtime and simplifies maintenance. Order replacements via Metav Werkzeuge or consult our advisors for technical clarification. Replacement Scribing Tips M201.274.A — Pair with Carbide Points (Metav IndustryLine) Replacement Scribing Tips M201.274.A designed for precision marking and layout work in mechanical workshops and maintenance departments Durable carbide marking tips for long service life Compatible with 201.274–201.277 series fittings Robust construction for repeatable scribing results Precision and longevity for everyday marking The set of carbide tips is engineered to deliver consistent line quality over extended use, making it suitable for recurring layout and scribing operations. The hard-wearing point material retains sharpness, reducing the frequency of replacement and ensuring repeatable marks on hardened surfaces. This lowers rework and contributes to a steadier production flow, particularly where accuracy in transfer and reference lines is essential. Fast replacement, reduced downtime Designed for swift installation on the matching fittings, the replacement tips allow maintenance teams to restore full functionality quickly. The compact package (gross weight approx. 0.2 kg) keeps stock management simple and the minimal handling required reduces the risk of alignment errors during changeover. Compatibility with the 201.274–201.277 range ensures spare-part standardisation and fewer different spare items to carry in the workshop. Practical fit for workshop layout and measuring fixtures These scribing points are a pragmatic accessory where precision marking supports assembly, machining and inspection tasks. The robust design resists deformation under normal scribing forces and maintains a reliable centre point for repetitive work. Metav IndustryLine supplies this spare part as part of a broader commitment to accessible, professional measurement solutions, backed by warehouse distribution in Emmerich for dependable supply. For reliable, workshop-ready replacement scribing tips from Metav IndustryLine, contact Metav Werkzeuge for ordering and compatibility advice; Metav Werkzeuge is available at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: M201.274.A GTIN: 4054469182759 Manufacturer: Metav IndustryLine Key figures Weight: 0.2 kg Features Pair with carbide tips Compatible with models 201.274–201.277 Category: Calipers (measuring instruments) FAQ What materials are these tips suitable for marking? The replacement tips are carbide-tipped for durability and are intended for standard workshop marking tasks; they produce reliable scribe marks on common metalwork during layout operations with the compatible fixtures. Can these tips be fitted to other model ranges? Compatibility is specified for the 201.274–201.277 series; fitting to other ranges is not guaranteed and should be verified against the relevant fixture dimensions before purchase. How often should the carbide points be replaced? Replacement frequency depends on usage intensity and the materials marked; the carbide construction is intended to extend service life compared with softer points, reducing replacement intervals in regular workshop use. Is the product supplied as a calibrated measuring instrument? This item is an accessory (scribing tips) and is supplied as a replacement part; it does not constitute a calibrated measuring instrument. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com