What is another name for messschieber?

Benefit from dependable 0.05 mm resolution, robust stainless steel construction and an interchangeable measuring rod that adapts to varied depth tasks; order the depth gauge directly via Metav Werkzeuge or consult our specialists for further technical advice. Depth Gauge with Interchangeable Pin Tip M204.063 — 0–150 mm, 0.05 mm Vernier (Metav IndustryLine) The Depth Gauge with Interchangeable Pin Tip M204.063 is an analogue depth gauge designed for standard workshop and machine‑shop depth measurements up to 150 mm, offering a compact, durable solution for precise recess and bore depth checks. 0.05 mm vernier resolution Stainless steel, matt‑chrome scale Interchangeable measuring rod and pin tip Supplied in a transport case Precise depth control for everyday production This analogue instrument delivers a clear metrological advantage through its 0.05 mm vernier, derived from the 1/20 mm nonius. The fine gradation allows repeatable depth readings that meet common workshop tolerances while remaining simple to interpret without electronics. The design combines a rigid depth beam with a slim measuring pin, enabling access to narrow recesses and stepped features. Compliance with DIN 862 guarantees that the gauge matches established mechanical‑engineering standards and fits seamlessly into established inspection routines. Robust handling and corrosion resistance Constructed from stainless steel with a matt‑chrome scale and vernier, the instrument resists workshop contaminants and reduces surface glare for easier reading under workshop lighting. The interchangeable measuring rod and pin tip provide practical adaptability: the rod can be repositioned for different depths or replaced if damaged, avoiding the need for a full tool swap. At around 0.2 kg, the gauge is light enough for single‑hand use yet stiff enough to ensure stable measurements within its standard range. Designed for the workshop: classification and use case With a measuring span to 150 mm, the device falls into the Standard size class (100–300 mm), which is the universal choice for machine shops and metalworking departments thanks to its balanced reach and stiffness. As an analogue vernier instrument, it is particularly useful where electromagnetic interference or battery dependence is a concern, or where a tactile, mechanical feel is preferred for routine quality checks. The measuring kit is supplied ready for use in a transport case, facilitating safe storage and controlled transport between workstations. Specify the Metav IndustryLine depth gauge M204.063 for reliable 0.05 mm depth measurement — contact Metav Werkzeuge in Emmerich for procurement and technical guidance at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: M204.063 GTIN: 4054469164076 Standard: DIN 862 Type: analogue depth gauge Facts Measuring range: 0–150 mm Resolution (vernier): 0.05 mm Weight: 0.2 kg Tariff code: 90173000 Bridge / beam: 100 mm Special features Stainless steel with scale and vernier, matt‑chrome finish Nonius 1/20 mm (0.05 mm) on lower edge Interchangeable pin tip and measuring rod Standard size class: 100–300 mm Supplied in a transport case FAQ How accurate is the instrument for workshop checks? The depth gauge M204.063 offers a vernier resolution of 0.05 mm, suitable for standard industrial checks and production control within common workshop tolerances. Can the measuring pin be changed for different tasks? Yes, the instrument features an interchangeable measuring rod and pin tip, so the probe can be repositioned or replaced to suit specific depth requirements. Is this gauge suitable for harsh workshop environments? The matt‑chrome finish on stainless steel provides enhanced corrosion resistance and reduces glare, making the gauge robust enough for typical machine‑shop conditions. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Combining 0.02 mm accuracy with IP54 protection and an absolute measuring system provides dependable workshop measurements and consistent quality control; order the instrument directly via Metav Werkzeuge or request advice from our consultants. Digital Caliper 150 mm, IP54 (DIN 862) — Metav IndustryLine The Digital Caliper 150 mm, IP54 (DIN 862) is a compact, workshop-ready absolute caliper for precise external, internal, depth and step measurements in standard machining environments. IP54 protection for dusty and damp environments Absolute measuring system with 0.02 mm accuracy Stainless steel construction with glass scale RB 6 data output for digital integration Robust accuracy for everyday metrology This caliper delivers 0.02 mm accuracy on an absolute measuring system, a combination that gives reliable, repeatable readings across routine inspection tasks. The stainless steel body with a glass scale resists wear while maintaining stable guidance, so measurements remain consistent over time. Built to the DIN 862 standard, the instrument suits general metalworking and maintenance use where a balance of reach and stiffness is required. Clear digital readout and data connectivity The instrument features a digital display with on/off, 0/ABS, mm/inch and Origin controls for intuitive operation. A RB 6 data output permits straightforward connection to data loggers or inspection software, enabling traceable records and faster quality workflows. The display resolution and measurement logic reduce interpretation errors, which speeds up checking procedures and supports process documentation in production environments. Four measurement modes and practical handling Equipped for four-fold measurement (external, internal, depth and step), the caliper replaces several single-purpose gauges, saving bench space and simplifying inspection sequences. The compact 150 mm format is classified in the standard range for workshop calipers, offering an optimal compromise between reach and rigidity that enhances single-hand handling and repeatable results for typical machine‑shop components. Durable protection and transport convenience With IP54 ingress protection and delivery in a protective case, the device withstands workshop conditions and is safer to store and transport between job sites. The lightweight construction (approx. 0.4 kg) and secure jaws reduce operator fatigue during repeated checks, while the battery-powered electronics (3 V CR2032) keep downtime to a minimum. For workshop-ready precision with robust protection, request the Metav IndustryLine Digital Caliper M216.255 from Metav Werkzeuge GmbH or contact our technical advisors at info@metav-werkzeuge.com / +49 2822 7131930 for specification support Technical Data Article number: M216.255 GTIN: 4054469182551 Eclass: 21170344 Norm: DIN 862 Facts Measuring range: 0–150 mm Resolution / display: 0.02 mm Accuracy: ±0.02 mm Weight: 0.4 kg Battery: 3 V CR 2032 Protection class: IP54 Special features Material: stainless steel with glass scale Measuring system: Absolute Measurement modes: external, internal, depth, step Data output: RB 6 Digital display functions: ON/OFF, 0/ABS, mm/inch, Origin button Delivered in protective case for transport FAQ Is the caliper suitable for workshop environments with splash and dust? The Digital Caliper 150 mm meets IP54 and is designed for dusty and damp workshop conditions, providing protected operation without compromising accuracy. Can measurement data be exported to inspection software? Yes. The instrument includes a RB 6 data output for direct connection to data loggers or PC systems to streamline record keeping. Which measurement types are possible with this caliper? This caliper supports four measurement tasks: external, internal, depth and step measurements, covering most routine inspection needs. What is the display resolution and typical accuracy? The digital readout displays at 0.02 mm resolution, with an accuracy of ±0.02 mm, suitable for standard machine‑shop quality control. Is the caliper supplied ready for transport and storage? The tool is supplied in a protective case for safe transport and workshop storage. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of the combination of clear large-digit readout, fibreglass lightness, and workshop‑grade 150 mm range for efficient, repeatable checks on everyday components; order directly via Metav Werkzeuge or consult the specialists for application advice. Digital caliper M216.073 by Metav IndustryLine — 150 mm, fibreglass, 0.1 mm resolution Digital caliper M216.073 offers a compact, easy-to-read measuring solution for routine workshop tasks and quality checks across general metalworking and maintenance applications. Fibreglass body, corrosion resistant 150 mm measuring range 0.1 mm digital resolution Large 16 mm high-contrast digits Clear legibility for fast inspection and fewer errors The instrument features a large 16 mm digit height on the display, which significantly reduces reading time in busy production or maintenance environments. Combined with a straightforward digital interface — including ON/OFF, ZERO and mm/inch functions — the device streamlines routine dimension checks. The 0.1 mm resolution positions this caliper for standard workshop accuracy, making it suitable for general machining and assembly tasks where rapid, unambiguous readings are more important than micrometre-level precision. This balance of readability and sufficient accuracy supports quicker decision‑making on the shop floor and reduces the risk of rework caused by misreading small displays. Lightweight fibreglass design that withstands daily use Constructed from fibreglass, the gauge remains exceptionally light (approx. 0.1 kg) while offering good resistance to corrosion and everyday knocks. The material choice lowers operator fatigue during repetitive measuring routines and enables safe use in environments where metal calipers could mark soft surfaces. The instrument’s 150 mm range places it in the standard caliper category, which is the most versatile size for workshops: it combines reach, stiffness and single‑hand handling for measurements on shafts, housings and interfaces commonly encountered in production and repair work. The compact form factor and blister packaging facilitate tidy storage and straightforward distribution within tools cupboards. Practical controls and ergonomic handling to increase throughput Ergonomic jaw geometry with a beak length of 40 mm provides stable contact for external and internal measurements, while the simple digital control scheme reduces training time for new operators. The lightweight slider and intuitive button layout enable swift zeroing and unit changes, improving throughput during repetitive inspection cycles. The caliper is supplied with basic workshop calibration and is targeted at organisations seeking reliable, low‑maintenance tools for standard quality control tasks. Integration into daily workflows is straightforward, and the device complements a broader toolset from Metav IndustryLine for centralised procurement and consistent performance across the shop. For straightforward, readable workshop measurement from Metav IndustryLine, order the M216.073 through Metav Werkzeuge or request tailored application advice by phone or e‑mail — Metav’s specialists in Emmerich are ready to assist. Technical Data Article number: M216.073 GTIN: 4054469182834 Brand: Metav IndustryLine Facts Measuring range: 0–150 mm Resolution: 0.1 mm Digit height: 16 mm Weight: 0.1 kg Beak length: 40 mm Voltage: 3 V Special features Material: fibreglass Display: ON/OFF, ZERO, mm/inch Packaging: blister pack Suitable category: Standard caliper (100–300 mm range) SKU: M216.073 FAQ Is this caliper suitable for precision workshop checks? The Digital caliper M216.073 delivers 0.1 mm resolution and a 150 mm range, which suits standard workshop and assembly inspections where rapid, reliable readings are required rather than sub‑micrometre measurement. What materials is the caliper designed to cope with? The fibreglass construction of the M216.073 is corrosion resistant and robust for everyday handling; it is appropriate for general metalworking and maintenance tasks but is not intended as a replacement for metrology‑grade instruments on high‑precision materials. Does the display offer both metric and imperial units? Yes, the instrument provides mm/inch conversion via the dedicated display button to support mixed workflows and simplify documentation across projects. Is a calibration certificate included? The tool is supplied with standard workshop calibration suitable for routine quality control. If a higher level of traceable certification is required, Metav Werkzeuge can advise on appropriate calibrated solutions. What power source does the caliper use and how long does it last? The caliper operates from a 3 V cell. Actual service life depends on usage patterns and switch‑off behaviour; the ON/OFF control is provided to preserve battery life during intermittent use. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of a lightweight, maintenance‑friendly measuring tool that delivers reliable workshop results: accurate 0.05 mm graduations, a practical 150 mm measuring range and an integrated depth gauge ensure routine tasks run smoothly. Order directly via Metav Werkzeuge or consult our specialists for bulk supply and stock details. Plastic Caliper 150 mm — analogue vernier, 0.05 mm reading (Metav IndustryLine) The Plastic Caliper 150 mm is an analogue measuring instrument designed for general workshop and maintenance use, providing basic outside, inside and depth measurements with a compact, easy‑to‑handle format Lightweight plastic construction Vernier reading 0.05 mm Integrated depth gauge 150 mm range for standard tasks Standard range accuracy for everyday workshop use The instrument is built around a classic analogue vernier design with a 0.05 mm graduation, making it suitable for routine checks and component matching in production environments. With a 150 mm measuring span the device sits in the Standard class of calipers, offering the best compromise between reach and stiffness for everyday tasks. The vernier scale permits readable, immediate results without batteries, and the specification aligns with common workshop tolerances, so the tool functions as a dependable rough‑to‑medium accuracy measuring solution. Practical handling and clear measuring functions A plastic body reduces weight and eliminates corrosion risks common to metal calipers, while the integrated depth gauge extends functionality beyond simple outside and inside measurements. The shorter jaw length of 40 mm keeps the instrument torsion‑resistant and easy to manoeuvre in confined spaces. The analogue layout keeps training time low and service needs minimal; basic maintenance is limited to keeping the sliding surfaces clean and lightly lubricated, which suits busy production benches and teaching environments where frequent, uncomplicated checks are required. A cost‑effective, low‑maintenance choice for standard tasks Constructed for routine operation rather than high‑precision metrology, this caliper offers a practical balance of economy and functionality. The light construction and simple mechanics mean fewer wear parts and lower replacement costs across a workshop fleet. Metav IndustryLine supplies this model with the usual European distribution assurance from Emmerich, backed by broad stock availability for straightforward reordering and reliable lead times for trade customers. Contact Metav Werkzeuge in Emmerich for procurement details or to discuss a volume requirement — info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: M201.114 GTIN: 4054469182469 Label: Messschieber aus Kunststoff 150 mm Ablesung 0,05 mm Manufacturer: Metav IndustryLine Facts Measuring range: 0–150 mm Reading / resolution: 0.05 mm Weight: 0.2 kg Jaw length: 40 mm Analogue vernier: yes Special features Material: plastic Depth measurement: integrated depth gauge Type: analogue caliper for workshop use Suitable application: standard workshop and maintenance tasks FAQ What measuring range does this caliper cover? The caliper covers a measuring range of 0–150 mm and is classified in the Standard range for general workshop applications. What reading accuracy can be expected? The instrument provides a vernier reading of 0.05 mm; this makes it suitable for routine checks and component matching where medium‑level precision is sufficient. Is depth measurement available with this model? Yes, the caliper includes an integrated depth gauge for simple depth and step measurements in addition to outside and inside dimensions. Is the plastic construction suitable for metalworking tasks? The plastic construction offers corrosion resistance and low weight, making the caliper appropriate for general workshop, maintenance and training tasks; for high‑precision or heavy‑duty measurement in metalworking, higher‑specification metal calipers would be recommended. Which brand and SKU identify this product? This item is supplied under Metav IndustryLine with the article number M201.114 and GTIN 4054469182469. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of precise measurement, robust protection and versatile four‑way measuring capability to streamline inspection tasks on the shop floor. The combination of IP67 water‑ and dust resistance and 0.01 mm readout ensures reliable results even in humid or coolant‑exposed environments. Order the caliper directly via Metav Werkzeuge or contact our consultants for application advice. Digital caliper 200 mm (IP67) with rectangular depth rod 3.7 x 1.3 mm — Metav IndustryLine A Digital caliper 200 mm (IP67) designed for workshop and machine‑shop use, offering reliable outside, inside, depth and step measurements with a robust stainless‑steel construction. IP67 protection for dust and water resistance 0.01 mm resolution with MODE and SET functions Hardened stainless steel construction Four‑way measurement: inside, outside, depth, steps Accurate measurement that speeds up inspection The 200 mm digital caliper delivers 0.01 mm resolution on a clear digital display, paired with an industry‑standard accuracy of ±0.03 mm for this measuring range. Compliance with DIN 862 provides an objective baseline for quality control processes, so measurement results can be compared across shifts and suppliers. The precise readout shortens inspection cycles and reduces rework by helping operators make decisive adjustments faster; in production environments the result is improved throughput and fewer stoppages. Built to withstand workshop conditions and simplify handling A hardened stainless steel frame and IP67 ingress protection combine to make this caliper resilient against chips, coolant and light wash‑down. The rectangular depth rod (3.7 x 1.3 mm) permits stable depth measurement in narrow bores and stepped features that round rods struggle to reach. The display includes MODE and SET controls for quick unit changes and zeroing, enabling straightforward one‑person operation even on the shop floor. Robust materials and protected electronics lower downtime and extend service life. Versatile measuring modes and shop‑floor integration This instrument supports four‑way measurement — outside, inside, depth and step — allowing a single tool to replace multiple gauges and reduce tool changes at the bench. Categorised as a standard‑range caliper (measuring range up to 300 mm), it offers the best compromise between reach and stiffness for general machine‑shop tasks. The compact slider and ergonomic thumbwheel allow controlled movement and repeatable contact force, contributing to consistent results across repeated checks. If further technical data or application examples are required, Metav’s consultants can advise on integration into existing inspection routines. For robust, workshop‑ready measurement choose the Metav IndustryLine digital caliper and contact Metav Werkzeuge for tailored advice and ordering assistance. Technical data Article number: M216.152.N GTIN: 4054469178851 Brand: Metav IndustryLine Category: Calipers Standard: DIN 862 Facts Measuring range: 0–200 mm Resolution: 0.01 mm (0.0005 in) Accuracy: ±0.03 mm Weight: 0.5 kg Protection class: IP67 Tariff number: 90173000 Special features Material: hardened stainless steel Depth rod: rectangular 3.7 x 1.3 mm Digital display with MODE and SET buttons Four‑way measurement: inside, outside, depth, steps FAQ What is the measuring accuracy of this caliper? The Digital caliper 200 mm from Metav IndustryLine has an accuracy of approximately ±0.03 mm for the 0–200 mm range, in line with DIN 862 for digital calipers. Can the caliper be used in a wet environment or with coolant exposure? Yes, the instrument is rated IP67, so the digital caliper withstands dust ingress and temporary immersion, making it suitable for use where coolant or splash‑back may occur. Which measurements can be performed with the caliper? The caliper supports four‑way measurement: outside, inside, depth and step measurements, enabling versatile use across common workshop tasks. Is the display easy to operate and switch between units? The digital display includes MODE and SET buttons for rapid switching of units and zeroing, designed for efficient operation during repetitive inspection work. What is the product SKU and which brand supplies it? The product is supplied by Metav IndustryLine and is listed as SKU M216.152.N for ordering and inventory purposes. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of the combination of IP67 protection, carbide-tipped measuring faces and 0.01 mm resolution for reliable workshop measurements; the robust stainless‑steel construction and protective case keep accuracy consistent in daily use. Order the digital caliper directly via Metav Werkzeuge or contact our consultants for product matching and delivery options. Digital Caliper M216.160.N — 300 mm, carbide-tipped, IP67 (Metav IndustryLine) Digital Caliper M216.160.N — a standard‑range precision measuring instrument for workshop and industrial metrology, featuring carbide measuring faces and a sealed design for use in harsh environments Digital display with MODE and SET buttons Carbide-tipped measuring faces for wear resistance IP67 protection for dust and temporary immersion Delivered in a protective case for transport and storage Reliable accuracy for everyday workshop tasks The caliper is designed to deliver consistent results in production and inspection environments: 0.01 mm resolution combined with a stated accuracy of ±0.03 mm provides measurable confidence for typical machining and assembly tasks. Conformity with DIN 862 ensures that the instrument meets recognised mechanical caliper standards, while the stainless‑steel, hardened frame maintains dimensional stability during repeated use. The numeric readout with MODE and SET simplifies switching between units and functions, reducing measurement time and potential transcription errors. Robust construction and protection that reduce downtime A sealed enclosure with IP67 protection prevents dust ingress and allows temporary immersion, making the caliper suitable for workshops where coolant mist or swarf is present. Carbide-tipped measuring faces give substantially higher wear resistance than plain steel jaws, extending service life in heavy-use applications. The hardened construction and the included protective case reduce the risk of accidental damage during transport and storage, helping to maintain calibration and minimise interruptions to production. Versatile measuring functions for a broad range of tasks This instrument supports 4‑fold measurement capability — outside, inside, depth and step measurements — enabling a single tool to handle the most common dimensional checks. The square depth gauge (3.7 × 1.3 mm) and 60 mm jaw length allow access to confined features and stepped components, bridging workshop convenience with the reach needed for many assemblies. As a standard‑range device (0–300 mm), it occupies the universal middle ground between compact and large calipers, offering a balance of reach, stiffness and one‑hand operation suited to machine shops and maintenance departments. Contact Metav Werkzeuge today for tailored advice on how the Metav IndustryLine Digital Caliper M216.160.N can integrate into existing inspection workflows and for information on delivery from our Emmerich hub Technical Data Article number: M216.160.N GTIN: 4054469178899 Tariff number: 90173000 Brand: Metav IndustryLine Facts Measuring range: 0–300 mm Resolution: 0.01 mm (0.0005 in) Accuracy: ±0.03 mm Weight: 1 kg Jaw length: 60 mm Special features Material: hardened stainless steel Measuring faces: carbide-tipped Protection class: IP67 Standard: DIN 862 Display: digital with MODE and SET buttons Depth gauge: square, 3.7 × 1.3 mm Measuring functions: outside, inside, depth, step Delivered in protective case FAQ What measurement functions does this caliper support? The Metav IndustryLine digital caliper supports outside, inside, depth and step measurements, providing four measurement modes for common workshop tasks. Is the caliper suitable for use in wet or dusty environments? Yes. The caliper’s IP67 rating ensures resistance to dust ingress and temporary immersion, making it suitable for use where coolant spray or fine particles are present. What level of precision can be expected from this instrument? The instrument offers 0.01 mm resolution with a stated accuracy of ±0.03 mm, which is appropriate for standard machining, inspection and assembly operations. Are the measuring faces resistant to wear? Yes. The caliper features carbide-tipped measuring faces, which significantly improve wear resistance compared with plain steel jaws. Does this caliper comply with recognised standards? The device is manufactured according to DIN 862, aligning with established mechanical caliper requirements for workshop use. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Benefit from a robust stainless steel construction, a DIN 862 vernier with 0.02 mm resolution and an interchangeable measuring rod for flexible depth measurement — order directly via Metav Werkzeuge or consult our specialists for technical advice. Depth Gauge M204.069 — Interchangeable Rod, 0.02 mm Vernier (DIN 862) A Depth Gauge M204.069 designed for precise depth and step measurement in machine shops and inspection tasks. Stainless steel, matt chrome scale and vernier Precise vernier resolution 0.02 mm Interchangeable measuring rod for tight recesses Conforms to DIN 862 standard Accurate construction for repeatable workshop measurements The depth gauge is built from stainless steel with a matt‑chrome finish on the scale and vernier, which reduces reflection and keeps graduations legible under workshop lighting. With a measuring range of 0–300 mm and a mechanical Vernier (1/50 mm) giving 0.02 mm resolution, the instrument fulfils the Standard class for workshop calipers and depth gauges, offering industrially relevant precision for everyday quality control. The adherence to DIN 862 provides a verifiable standard for traceable routines and supports consistent process inspection across production runs. Flexible probe and practical handling for confined spaces Equipped with a pointed probe and an interchangeable measuring rod, this gauge is tailored to reach narrow bores and recessed features while still giving a clear analogue readout. The mechanical design ensures ruggedness for shop use: the smooth sliding action and firmly seated rod reduce measurement scatter caused by handling. Supplied in a transport case, the instrument is protected during transit and storage, making it suitable for mobile inspection tasks or shared metrology stations where durability and quick readiness matter. Everyday benefits that support workflow and trust As part of the Metav IndustryLine, the tool is positioned for dependable workshop integration: clear 0.02 mm resolution for validated checks, a corrosion‑resistant finish for longevity, and a compact form factor that suits benches and inspection tables. Metav’s offering combines wide product availability with a quality filter based in Emmerich, supporting reliable supply and consistent product standards — a practical choice for workshops seeking reproducible measurements without complex setup. The mechanical readout keeps the instrument straightforward to use while maintaining the precision required for machining and assembly tasks. Choose the Metav IndustryLine depth gauge for robust, repeatable depth measurement and contact Metav Werkzeuge for expert guidance or to arrange delivery from Emmerich. Technical Data Article number: M204.069 GTIN: 4054469164137 Standard: DIN 862 Manufacturer: Metav IndustryLine Facts Measuring range: 0–300 mm Bridge: 150 mm Resolution: 0.02 mm Nonius: 1/50 mm Tariff number: 90173000 Special features Material: stainless steel with matt chrome scale and vernier Probe: pointed probe and interchangeable measuring rod Delivery: supplied in a transport case Type: analogue mechanical vernier depth gauge FAQ What measuring range does the gauge cover? The depth gauge offers a measuring range of 0–300 mm, suitable for standard workshop and machine‑building tasks. What accuracy and resolution can be expected? Resolution is 0.02 mm via the mechanical vernier (1/50 mm), providing the fine graduations required for routine inspection and machining checks with repeatable results. Is the instrument protected during transport? Yes, the gauge is supplied in a transport case to protect the instrument and accessories during carriage and temporary storage. Which materials and features support shop use? Constructed from stainless steel with a matt‑chrome scale and vernier, the gauge resists corrosion and glare; the pointed probe and interchangeable rod enable measurement in narrow or recessed features. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Taking advantage of durable carbide tips and straightforward compatibility with the 201.274–201.277 series provides reliable, repeatable scribing for workshop layout tasks; the robust design minimises downtime and simplifies maintenance. Order replacements via Metav Werkzeuge or consult our advisors for technical clarification. Replacement Scribing Tips M201.274.A — Pair with Carbide Points (Metav IndustryLine) Replacement Scribing Tips M201.274.A designed for precision marking and layout work in mechanical workshops and maintenance departments Durable carbide marking tips for long service life Compatible with 201.274–201.277 series fittings Robust construction for repeatable scribing results Precision and longevity for everyday marking The set of carbide tips is engineered to deliver consistent line quality over extended use, making it suitable for recurring layout and scribing operations. The hard-wearing point material retains sharpness, reducing the frequency of replacement and ensuring repeatable marks on hardened surfaces. This lowers rework and contributes to a steadier production flow, particularly where accuracy in transfer and reference lines is essential. Fast replacement, reduced downtime Designed for swift installation on the matching fittings, the replacement tips allow maintenance teams to restore full functionality quickly. The compact package (gross weight approx. 0.2 kg) keeps stock management simple and the minimal handling required reduces the risk of alignment errors during changeover. Compatibility with the 201.274–201.277 range ensures spare-part standardisation and fewer different spare items to carry in the workshop. Practical fit for workshop layout and measuring fixtures These scribing points are a pragmatic accessory where precision marking supports assembly, machining and inspection tasks. The robust design resists deformation under normal scribing forces and maintains a reliable centre point for repetitive work. Metav IndustryLine supplies this spare part as part of a broader commitment to accessible, professional measurement solutions, backed by warehouse distribution in Emmerich for dependable supply. For reliable, workshop-ready replacement scribing tips from Metav IndustryLine, contact Metav Werkzeuge for ordering and compatibility advice; Metav Werkzeuge is available at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: M201.274.A GTIN: 4054469182759 Manufacturer: Metav IndustryLine Key figures Weight: 0.2 kg Features Pair with carbide tips Compatible with models 201.274–201.277 Category: Calipers (measuring instruments) FAQ What materials are these tips suitable for marking? The replacement tips are carbide-tipped for durability and are intended for standard workshop marking tasks; they produce reliable scribe marks on common metalwork during layout operations with the compatible fixtures. Can these tips be fitted to other model ranges? Compatibility is specified for the 201.274–201.277 series; fitting to other ranges is not guaranteed and should be verified against the relevant fixture dimensions before purchase. How often should the carbide points be replaced? Replacement frequency depends on usage intensity and the materials marked; the carbide construction is intended to extend service life compared with softer points, reducing replacement intervals in regular workshop use. Is the product supplied as a calibrated measuring instrument? This item is an accessory (scribing tips) and is supplied as a replacement part; it does not constitute a calibrated measuring instrument. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com