Secure and precise workholding for metalworking productivity
Workholding devices such as workpiece clamps and chuck systems provide absolute positional stability and vibration damping during milling, turning, drilling and grinding, ensuring parts remain free of play under high CNC cutting and feed forces. By transferring clamping loads into the machine table or spindle without deforming the component, a well engineered workholding solution improves machining accuracy, surface finish and process reliability while reducing set-up times. Modular systems from machine vices and chucks to zero-point systems and specialised fixtures enable fast changeovers and support both serial and single-part production, delivering consistent clamping force, repeatability and enhanced throughput.
71° 2500 N Horizontal Clamp, Zinc Plated, 2800 N Holding Force, 0.46 kg - Kukamet
Take advantage of a compact, galvanised design with 2,500 N clamping force and a 2,800 N holding capacity to secure repeatable clamping results in light- to medium-duty applications; order through Metav Werkzeuge or consult the sales team for specification matching. Horizontal clamp 121 – lever-operated horizontal base clamp by Kukamet, galvanised, 2,500 N clamping force The Horizontal clamp 121 is a lever-operated hold-down designed for horizontal mounting where fast, reliable securing of workpieces is required across workshop and industrial settings Lever-operated horizontal base mounting Galvanised steel for corrosion resistance 2,500 N clamping force, 2,800 N holding force Lightweight 0.46 kg compact design Consistent force for repeatable processes The clamp delivers a defined 2,500 N clamping force and a 2,800 N holding capacity, values that support reproducible fixing across successive operations. Expressing these forces in newtons provides an objective basis for process planning: the first value denotes the applied clamping pressure while the second quantifies the passive retention under stress. For assembly jigs and fixture setups, the measurable performance reduces variation and shortens cycle validation time. The lever mechanism ensures the force is applied quickly and without complex adjustment, improving throughput in repetitive tasks. Corrosion-resistant construction for long service life Constructed from galvanised steel, the component resists surface corrosion commonly encountered in workshop environments and light manufacturing. The low mass of 0.46 kg and compact footprint make integration into existing fixtures straightforward, while the horizontal foot mounting enables flush installation on worktops or tooling plates. The surface finish reduces maintenance intervals and preserves clamping geometry, which translates into fewer interruptions for replacement or refurbishment and steadier long-term accuracy. Efficient operation and ergonomic handling The lever-based actuation operates over a 71° travel angle, offering a balance between grip range and operator ergonomics; the lever action provides tactile feedback at the clamping point, aiding repeatable closure without electronic aids. Where rapid part changeover is required, the compact mechanism reduces downtime and simplifies fixture layout. The unit’s straightforward design allows easy visual inspection of engagement and quick verification that the workpiece is secured before machining or assembly. Discuss specification matching or request a quote from Metav Werkzeuge for the Kukamet Horizontal clamp 121 (SKU 121-3) — contact info@metav-werkzeuge.com or call +49 2822 7131930 to confirm suitability for the intended application Technical Data Article number: 121-3 GTIN: 8680731501087 Brand: Kukamet Mounting: horizontal foot Facts Clamping force: 2,500 N Holding force: 2,800 N Weight: 0.46 kg Angle: 71° eClass: 21041719 ETIM: EC011973 Special features Material: galvanised Category: Spanner Special feature: none FAQ What clamping and holding forces does this clamp provide? The Kukamet Horizontal clamp 121 provides a clamping force of 2,500 N and a holding force of 2,800 N, suitable for repeatable light- to medium-duty fixture work. How is the clamp mounted to a fixture or workbench? Mounting is via a horizontal foot; the Kukamet unit is designed for flush installation onto tooling plates or bench tops using the horizontal base. What material is the clamp made from and how does that affect durability? The clamp is made from galvanised steel, which improves resistance to surface corrosion and reduces maintenance needs in workshop environments. Is the clamp suitable for quick part changeovers? Yes. The lever-operated mechanism with a 71° travel angle enables fast engagement and release, supporting efficient changeovers in repetitive processes. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
72mm Extension Nut M24 SW36 40mm Corner Dimension - AMF
Benefit from a compact combination of secure M24 thread extension and a 36 mm spanner face with a 72 mm overall height for reliable connection extensions in assembly work. Order or request application advice via Metav Werkzeuge to ensure seamless integration into production processes. Extension Nut No. 6334 M24 — M24 thread, 36 mm spanner face (AMF) The Extension Nut No. 6334 M24 is an M24 thread extension nut designed to extend threaded connections and provide a defined engagement length for assembly and repair tasks. M24 thread for secure fastening 36 mm spanner width (SW 36) Overall height 72 mm for thread extension Secure thread extension where strength matters The M24 specification gives a clear, standardised basis for compatibility with M24 bolts and studs, enabling a dependable thread extension without rework. Using the extension nut reduces the need to replace long components and helps maintain clamping force where original threads are worn or inaccessible. The defined 72 mm overall height creates predictable engagement length, which supports consistent torque transmission and contributes to stable joint integrity in repetitive assemblies. Fast, tool-compatible installation for workshop efficiency Fitting requires only a standard 36 mm spanner, which simplifies maintenance and lowers machine downtime. The single-tool installation removes complexity from assembly sequences and shortens set-up times, offering a measurable improvement in throughput. This straightforward procedure translates into time savings during regular servicing and enables quicker turnaround in production and repair environments without specialised tooling. Predictable integration and process reliability Designed as a practical component for workshop and industrial use, the part supports predictable assembly outcomes and helps avoid process interruptions. The clear specification of thread size and spanner face reduces selection errors during procurement and at the bench, improving workflow reliability. Where repeatability matters, this extension nut provides a consistent mechanical connection that aligns with common workshop practices and standard torque procedures. Contact Metav Werkzeuge for technical clarification on fitment, stock availability or to discuss how the AMF Extension Nut No. 6334 M24 suits specific applications Technical Data SKU: 4000833433NW Type: No. 6334 - M24 Label: Verlängerungsmutter Nr. 6334 M24 SW 36mm AMF Product type: Extension nut UID: 4000833433NW Dimensions & Key figures Overall height: 72 mm Spanner width: 36 mm Packaging unit: 1 Features & Applications M24 thread engagement SW 36 spanner face Addition: corner size 40 FAQ What thread size does this extension nut use? The AMF extension nut uses an M24 thread specification suitable for extending M24 threaded connections and ensuring secure fastening. Which tool is required to fit the part? A 36 mm spanner (SW 36) is required to tighten or loosen the extension nut; the SKU for reference is 4000833433NW. What is the overall height and why does it matter? The overall height is 72 mm, which determines the additional engagement length provided by the extension nut and helps ensure predictable clamp performance. Is the component intended for workshop and industrial assemblies? Yes — the AMF extension nut No. 6334 M24 is designed for workshop and industrial use where a standardised thread extension and reliable mechanical connection are required. Manufacturer: AMF / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
72mm Screw Jack Adjustable 265–360mm Height, 30 Kg Capacity - Vertex
Take advantage of the combination of compact design, adjustable height and reliable 30 kg load capacity for controlled vertical support in assembly and maintenance tasks. Order the screw jack directly via Metav Werkzeuge or consult our specialists for specification matching and supply. Screw jack VSJ-500 — Vertex vertical lift with adjustable 265–360 mm stroke and 30 kg capacity The Screw jack VSJ-500 is a compact mechanical lift for precise vertical positioning in workshop, assembly and light-duty production applications. Compact adjustable lift for tight spaces Adjustable height 265–360 mm Load capacity 30 kg, robust construction Precise vertical control that speeds set-up and adjustment The VSJ-500 provides precise vertical adjustment through a mechanically simple screw drive, enabling repeatable positioning without electrical supply. The adjustable height 265–360 mm allows flexible use across fixtures and benches, reducing the need for shims or temporary supports. For workshops and assembly lines that require predictable motion and low-maintenance operation, the mechanical lift offers predictable behaviour under load and simple visual verification of position. The compact footprint and modest weight 4.6 kg make it suitable where space and handling matter, while the clear specification of 30 kg maximum load supports planning and risk assessment in jigs and light tooling setups. Easy integration with fixtures and improved workflow efficiency The design focuses on straightforward integration with existing workholding or assembly fixtures. A standard interface and clear dimensional range mean the unit can be incorporated into tables, rigs or mobile trolleys to provide reliable vertical force and positioning. Using a mechanical screw principle removes electronic complexity; maintenance is limited to inspection and lubrication, which keeps downtime low and service routines simple. As a consequence, process planners can rely on a compact support element that contributes to smoother changeovers and fewer makeshift adjustments during set-up. Durable, safe operation with clear technical limits Robust construction and defined limits support safe use in production and workshop environments. The VSJ-500’s clear maximum load of 30 kg and adjustable stroke offer an explicit operating window that simplifies risk assessment and operator instructions. The screw mechanism is well-suited to applications where fine increments of lift and controlled descent are required, while the modest overall mass supports easy handling during installation. When longevity and predictable behaviour are priorities, the mechanical lift provides a dependable option with low lifecycle complexity and straightforward inspection points. For reliable vertical support choose the Vertex VSJ-500 screw jack — contact Metav Werkzeuge in Emmerich for tailored advice and secure supply directly from our warehouse. Technical Data Article number: VSJ-500 GTIN: 4061905093708 Manufacturer: Vertex Facts Diameter: 72 mm Adjustable height: 265–360 mm Maximum load: 30 kg Weight: 4.6 kg ECLASS: 21044290 Special features Adjustable height 265–360 mm Compact mechanical screw drive Model: VSJ-500 FAQ What is the maximum load the screw jack supports? The VSJ-500 has a specified maximum load of 30 kg as stated in the technical data. Can the height be fine-adjusted for precise positioning? Yes — the unit offers an adjustable height range of 265–360 mm, enabling fine mechanical positioning for fixtures and small assemblies. Is this screw jack suitable for mobile or temporary setups? The compact form and weight of 4.6 kg make the VSJ-500 well suited to mobile or temporary workstations where reliable vertical support is required. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
73mm Boring Bar Holder E2 S Reduced Vibration Slotted, DIN 69880 - TECWERK
Reliable, slotted VDI40 tool holder combining vibration damping, coolant capability and secure turret retention for consistent boring performance; order the holder directly via Metav Werkzeuge or consult their specialists for application advice. Tool holder for boring bars, E2 S, VDI40 — TECWERK, Type B The tool holder for boring bars, E2 S is a slotted, vibration-reducing clamping unit designed for precision boring and turret-mounted turning centres compatible with the VDI40 interface. Slotted design reduces vibration Compatible with VDI40 turret interface Supports external and internal coolant Retaining ring prevents falling into turret Precise vibration control for smoother machining The slotted E2 S clamping section is engineered to wrap the boring bar, which reduces chatter and improves surface finish during boring operations. This mechanical damping is especially beneficial when machining with long overhangs or when using heavier cutting depths; the design helps to maintain concentricity and repeatability, translating into fewer reworks and higher throughput. The combination of the slotted sleeve and the VDI interface ensures consistent clamping force and improved dynamic stability across production runs. Coolant support and tool versatility for varied applications Integrated provision for both external and internal coolant increases process flexibility and helps to control cutting temperatures, particularly when machining steels and alloys. The holder accepts solid round boring bars, including those with a V-groove, allowing seamless use of common bar profiles without auxiliary adapters. Slotted lengths are specified to suit different bar diameters (e.g. up to 16 mm: 4 x D; 20 and 25 mm: 3 x D; from 32 mm: 2.5 x D), which gives clear guidance for selecting the correct bar diameter to achieve optimum clamping and chip evacuation. Compatibility and dimensional clarity for easy integration Conforming to DIN 69880, the holder matches VDI40 turret interfaces and standard machine fittings, simplifying procurement and machine setup. Key dimensions are D 73 mm and an overall length 174 mm, with a working length L1 of 152 mm and bore diameters d1/d2 of 40 mm, which supports standard 40 mm shank boring bars. Type B indicates a non-through-drilled shank; therefore, length adjustment from the shank side is not applicable for this variant. These clear specifications aid planning for tool magazines and ensure correct selection for existing tooling systems. Secure retention and workshop reliability The design includes a retaining ring that secures the holder against falling into the turret, addressing a common operational risk and safeguarding spindle and turret components. Where through-drilled variants are used, length adjustment can be performed from the shank side, but as Type B is not through-drilled, the focus here is on robust clamping and straightforward installation. Manufactured for industrial workshop environments, the holder supports repeatable setups and contributes to predictable machining cycles. Contact Metav Werkzeuge for tailored technical guidance on VDI40 clamping solutions and to arrange prompt delivery: info@metav-werkzeuge.com, +49 2822 7131930 Technical data Article number: 2000833492NW Manufacturer: TECWERK Product type: Tool holder for boring bars Facts Diameter D: 73 mm Overall length L: 174 mm Length L1: 152 mm d1: 40 mm d2: 40 mm Special features Form: E2 S Standard: DIN 69880 Type: B (not through-drilled) Slotted design; reduces vibration by wrapping the boring bar Suitable for solid round boring bars with V-groove Slotted area dimensions: up to 16 mm = 4 x D; 20 and 25 mm = 3 x D; from 32 mm = 2.5 x D External and internal coolant possible Secured by retaining ring to prevent falling into the turret FAQ What does Type B mean for this tool holder? Type B denotes a non-through-drilled shank; the holder is supplied without a central bore through the shank, so length adjustment from the shank side is not possible for this Type B variant. Is the holder compatible with standard VDI40 turrets? Yes. The Tool holder for boring bars, E2 S, VDI40 — TECWERK, Type B is designed to meet DIN 69880 and to fit VDI40 turret interfaces commonly used in turning centres. Can this holder be used with solid boring bars without coolant holes? The slotted design accepts solid round boring bars, including those with a V‑groove; coolant can be applied externally and, where appropriate tooling is used, internally as well. How does the slotted design affect vibration during machining? The slotting allows the holder to envelop the bar and apply a damping effect that reduces chatter, improving surface finish and repeatability for longer overhangs or heavier cuts. Are there specific bar diameters recommended for the slotted area? Yes. Slotted proportions are specified for different bar diameters: up to 16 mm = 4 x D; 20 and 25 mm = 3 x D; from 32 mm = 2.5 x D, which assists in selecting the correct bar size for secure clamping. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
74mm Pull Stud ISO 7388-3 Form AF, SK50, M24 Thread - TECWERK
Take advantage of an ISO‑compliant, SK50 toolholding solution that combines repeatable clamping accuracy with simple maintenance; the M24 thread and O‑ring sealing reduce downtime and protect the taper connection. Order the pull stud directly via Metav Werkzeuge or consult their specialists for application advice. TECWERK pull stud ISO 7388‑3 Form AF – SK50, M24 thread, O‑ring sealed The TECWERK pull stud ISO 7388‑3 Form AF is a precision retention knob for SK50 taper toolholders, designed for secure clamping in CNC machining applications. ISO 7388‑3 Form AF compatibility SK50 taper shank for high rigidity M24 thread for secure clamping Sealed with O‑ring, no bore Consistent, standardised clamping for repeatable accuracy The ISO 7388‑3 specification ensures a defined interface between spindle and toolholder, which is crucial for repeatable runout and consistent machining results. Built to Form AF, the retention knob provides the geometric features required for reliable engagement with SK50 toolholders. The M24 thread and the specified lengths (L1: 74 mm, L2: 34 mm) are matched to the standard so that seating depth and draw force remain consistent across machines. Clear numerical values allow straightforward verification during incoming inspection and reduce guesswork in production planning. Protected connection reduces maintenance and prevents contamination Sealing the connection with an O‑ring and supplying the part without a bore lowers the risk of coolant ingress and chip accumulation around the taper interface. This protective detail extends the service intervals of both the toolholder and the spindle taper, which in turn supports higher machine availability. The compact diameters (d1: 28 mm, d2: 21 mm, d3: 25 mm) maintain structural strength while keeping mass low, aiding dynamic balance where it matters. Maintenance becomes a matter of simple checks rather than frequent corrective work, helping to keep set‑up times predictable. Practical compatibility and procurement advantages Because the design follows the ISO 7388‑3 Form AF standard and fits SK50 tapers, the component integrates with common toolholding ecosystems found in production and jobbing shops. The clear specification simplifies procurement and inventory management: the SKU 2000832711NW identifies the part precisely for reorders and cross‑checks. Selecting standardised retention knobs reduces spare‑parts diversity and shortens machine downtime when replacements are needed. For workshops pursuing reliability and straightforward logistics, this standardised component supports both objectives without compromise. Select the TECWERK ISO 7388‑3 Form AF pull stud for ISO‑compliant toolholding and contact Metav Werkzeuge for tailored selection and delivery at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number (SKU): 2000832711NW Standard: ISO 7388‑3 Form AF (DIN 69872 Form B) Thread: M24 Shank: SK50 Product type: Pull stud Manufacturer: TECWERK Packaging unit: 1 Notes: without bore; sealed with O‑ring Key measurements d1: 28 mm d2: 21 mm d3: 25 mm L1: 74 mm L2: 34 mm Features / Special features Form AF design Compliant with ISO 7388‑3 Sealed with O‑ring to reduce contamination No bore (solid configuration) SK50 taper compatibility FAQ Which standard does this pull stud follow? The TECWERK pull stud follows ISO 7388‑3 Form AF (DIN 69872 Form B) and is manufactured to the dimensions listed for consistent interchangeability (SKU 2000832711NW). Is the component suitable for SK50 toolholders? Yes, the design matches SK50 taper interfaces and provides the mechanical features required for reliable engagement and clamping. Does this retention knob include a bore for lubrication or fastening? No, this version is supplied without a bore and is sealed with an O‑ring, reducing fluid entry and chip retention compared with bored designs. What are the critical dimensions to check during inspection? Key measurements to verify are d1 28 mm, d2 21 mm, d3 25 mm, L1 74 mm, L2 34 mm; these ensure correct seating and thread engagement for M24 clamping. How is the item packaged and identified for reorder? The part is supplied as a single unit (packaging unit: 1) and is identified by SKU 2000832711NW, which should be quoted when reordering the TECWERK pull stud. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund
75-96mm Hollow Spindle Stop With Internal Expansion Jaws, Adjustable Clamp - TECWERK
Take advantage of precise, rear‑mounted clamping and an adjustable axial position for repeatable set‑ups and minimal spindle runout; the secure inner‑wall jaw pressure guarantees a reliable seat in hollow spindles. Order the device directly via Metav Werkzeuge or consult the team for application advice. Hollow Spindle Stop for Spindle Ø75–96 mm – TECWERK The Hollow Spindle Stop is a rear‑inserted clamping device for hollow spindles, designed to secure tooling by pressing the jaws against the spindle inner wall and to allow axial repositioning with a special key. Rear insertion with special key tightening Clamping range 5–96 mm Fits spindle Ø75–96 mm Adjustable axial position with release key Precise clamping that reduces runout and improves repeatability The device provides a secure fit by pressing the clamping jaws against the inner wall of the hollow spindle, which reduces radial play and contributes to consistent concentricity during turning and rotating operations. The clamping range 5–96 mm covers a wide variety of mandrel and tool diameters, enabling one solution for multiple set‑ups. This compact rear‑mounted design simplifies installation in machines where front access is limited, while the mechanism ensures repeatable positioning for production runs. Simple operation and fast adjustment for workshop efficiency Assembly is straightforward: the stop is inserted from the rear of the hollow spindle and tightened with a special key, which drives the clamping screws and activates the jaws. When axial repositioning is required, the same key releases the jaws to allow controlled movement along the spindle axis. This method eliminates the need for complex fixtures, shortens set‑up times and reduces machine downtime — a clear operational advantage for busy workshops and serial production environments. Robust seating and safe handling minimise process interruptions Because the jaws are pressed directly onto the spindle inner wall, the connection achieves a positive seating that resists loosening under rotation, improving safety and reducing the risk of tool run‑out. The mechanism’s design prioritises a reliable seating rather than relying solely on friction, which supports stable machining forces and consistent machining quality. This stability contributes to lower scrap rates and less rework, making the stop a pragmatic choice for quality‑conscious operations. Wide applicability across machines and set‑ups The configuration suits hollow spindles with outer dimensions between Ø75–96 mm while the internal clamping span permits use with small to large tool shafts (5–96 mm). The product is particularly suitable for lathe spindles and machining centres that accept rear‑mounted accessories, offering a flexible solution for turning, balancing and rotational measurement fixtures. Where space constraints or accessibility limit front mounting, this rear‑inserted stop provides a compact and practical alternative. Contact Metav Werkzeuge for tailored technical advice and ordering support on the TECWERK hollow spindle stop; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 4000832498NW Label: Hollow spindle stop for spindle Ø75–96 mm Product type: Hollow spindle stop Manufacturer: TECWERK Packaging unit: 1 Facts Clamping range: 5–96 mm Suitable spindle outer diameter: Ø75–96 mm Special features Rear insertion and tightening with a special key Clamping jaws press onto spindle inner wall for secure seat Axial position adjustable when released with the key FAQ What spindle diameters does the stop suit? The hollow spindle stop fits spindles with an outer diameter of Ø75–96 mm and provides an internal clamping span from 5–96 mm, allowing versatile use across different tool shafts. How is the device tightened and released? Tightening and release are performed from the rear using a special key; turning the key expands the jaws to press against the inner wall and secures the stop, while reversing the action allows axial adjustment. Is the stop suitable for production use with frequent repositioning? Yes, the design supports repeated axial repositioning with consistent seating; the positive jaw contact reduces the likelihood of loosening under rotational loads, which is beneficial for serial production. Which SKU identifies this product for ordering? Order under SKU 4000832498NW; referencing this number ensures the correct hollow spindle stop from TECWERK is supplied. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund
750 N Andruckkraft, 1000 N Haltekraft, senkrechter Fuß, M5x35 Andruckspindel, 0,155 kg, Edelstahl - Kukamet
Mit korrosionsbeständigem Edelstahl, einer Haltekraft von 1.000 N und kompakter Bauform bietet der Vertikalspanner 212 eine langlebige und zuverlässige Lösung für präzise Spannaufgaben. Nutzen Sie die Kombination aus Stabilität und einfacher Montage für wiederholbare Spannprozesse und fragen Sie bei Bedarf die fachkundige Beratung von Metav Werkzeuge an. Vertikalspanner 212 von Kukamet Der Vertikalspanner 212 ist ein kompakter Edelstahl-Spanner mit senkrechtem Fuß für präzise Spannaufgaben in Werkstatt und Produktion Vertikalspanner »212« von Kukamet Edelstahlgehäuse für lange Lebensdauer Haltekraft bis 1.000 N für sichere Fixierung Druckkraft bis 750 N, präzise Betätigung Befestigung mit senkrechtem Fuß, kompakte Bauform Robuste Konstruktion für dauerhaften Einsatz Der Spanner verfügt über ein Edelstahlgehäuse, das Korrosion vorbeugt und die Wartungsintervalle reduziert. Diese Materialwahl sorgt für gleichbleibende Maßhaltigkeit und langlebige Funktion auch unter rauen Betriebsbedingungen. Die geringe Masse des Spanners macht ihn geeignet für Vorrichtungen mit begrenzter Belastbarkeit, ohne dabei Stabilität und präzise Bedienung zu opfern. Präzise Kraftwerte für verlässliche Spannprozesse Die technischen Kennwerte zeigen die Leistung: Druckkraft 750 N beschreibt die Betätigungskraft, während die Haltekraft 1.000 N die maximal sichere Fixierung bezeichnet. Die Andruckspindel M5x35 erlaubt feine Einstellschritte und erleichtert die Wiederholgenauigkeit bei Serienfertigung. Diese Werte machen das Gerät besonders geeignet für wiederkehrende Spannzyklen mit gleichbleibender Presskraft. Platzsparende Montage und einfache Integration Die Befestigungsart mit senkrechtem Fuß reduziert den Platzbedarf auf der Montageplatte und erleichtert die Integration in bestehende Spannvorrichtungen. Durch die kompakte Bauform lässt sich das Bauteil auch in beengten Anwendungen anbringen, was Einspannoptionen flexibilisiert und Einrichtzeiten reduziert. Gewicht und Abmessungen unterstützen schnelle Umrüstungen zwischen Fertigungsstationen. Zielgruppe und typische Einsatzfelder Der Spanner richtet sich an Werkstattbetreiber, Vorrichtungsbauer und Prüftechnik, die eine robuste, wiederholbare Spannlösung verlangen. Anwendungsszenarien sind Prüfframes, Montagevorrichtungen und mechanische Testaufbauten, bei denen konstante Haltekraft und Korrosionsbeständigkeit entscheidend sind. Die einfache Mechanik macht das Produkt zur wirtschaftlichen Wahl für Serien- und Handfertigung gleichermaßen. Kukamet Vertikalspanner 212 wegen Edelstahlkonstruktion und 1.000 N Haltekraft über Metav anfragen — unser Team in Emmerich berät gern per eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 Produktmerkmale Artikelnummer: S212-1 Marke: Kukamet Bezeichnung: Vertikalspanner 212 Fakten Druckkraft Max: 750 N Haltekraft Max: 1000 N Gewicht: 0.155 kg Andruckspindel: M5x35 Besonderheiten Material: Edelstahl Befestigungsart: senkrechter Fuß Besonderheit: Keine Storytrigger: hebelspanner ECLASS: 21041717 — Industrieklassifikation ETIM: EC011973 — Technische Produktklassifikation FAQ Wie hoch ist die Haltekraft des Vertikalspanner 212 von Kukamet? Die Haltekraft des Vertikalspanner 212 beträgt 1.000 N, sodass Bauteile zuverlässig fixiert werden können; die Angabe ist in der technischen Datenübersicht des Produkts S212-1 dokumentiert. Ist der Vertikalspanner 212 für den Einsatz in feuchter Umgebung geeignet? Aufgrund des Edelstahlgehäuses ist der Vertikalspanner 212 von Kukamet besser gegen Korrosion geschützt als unbeschichtete Ausführungen; für spezielle Umgebungsanforderungen empfiehlt sich eine kurze Rückfrage bei Metav Werkzeuge. Welche Spindelgröße hat der Kukamet Vertikalspanner 212? Der Vertikalspanner 212 ist mit einer Andruckspindel M5x35 ausgestattet, wodurch feine Justierungen und sicheres Anpressen bei Prüf- und Montagevorgängen möglich sind. Kann der Vertikalspanner 212 in bestehende Vorrichtungen integriert werden? Ja, die Befestigung mit senkrechtem Fuß und die kompakte Bauform des Vertikalspanner 212 (Artikelnummer S212-1) erleichtern die Integration in Montage- und Prüfplatten; bei Bedarf unterstützt Metav Werkzeuge bei technischen Fragen.
750 N Vertical Clamp With Safety Lock, Vertical Base, Blackened Finish - Kukamet
Take advantage of the combination of compact mounting, dependable clamping and an integrated safety lock for secure, repeatable holding in jigs and fixtures. Order the Vertical clamp 212 directly via Metav Werkzeuge or ask our consultants if needed. Vertical clamp 212 – Kukamet vertical clamp with safety lock and 750 N clamping force The Vertical clamp 212 is a compact, foot-mounted lever clamp designed for light industrial fixtures and workshop jigs, providing secure vertical clamping where space is limited. Safety lock for secure clamping Vertical foot mounting for compact fit 750 N clamping force, 1000 N holding force Black blued finish, corrosion-resistant Consistent holding power for repetitive tasks The clamp delivers a defined 750 N clamping force with a maximum holding force of 1,000 N, making it suitable for repeatable operations in assembly and machining fixtures. The M5x35 pressure spindle ensures a precise contact point and can be adjusted to accommodate small part tolerances; this technical combination reduces slippage and contributes to predictable process outcomes. By converting specification into measurable reliability, setup times are shortened and downstream rework is minimised. Compact mounting that saves bench space A vertical foot mounting enables installation on narrow fixture plates and tight tooling arrangements, allowing the component to be clamped from above without enlarging the footprint. The unit’s black blued finish offers basic corrosion protection and a professional appearance while keeping mass to a minimum at 0.155 kg, which helps when balancing moving fixtures or rotary pallets. The design is therefore appropriate for both small-series production and lab-style test rigs where space and cleanliness matter. Integrated safety features and straightforward integration Equipped with a safety lock, the clamping arm remains secured under vibration and during handling, supporting operator safety and consistent process results. The component’s simple geometry and standard thread sizes permit rapid integration into existing jigs; fixture engineers benefit from predictable interfaces and reduced custom machining. For businesses consolidating suppliers, choosing a well-documented clamp supports leaner procurement and steady uptime. Choose Kukamet’s robust vertical clamping solution for reliable fixture performance and contact Metav Werkzeuge for application guidance and fast supply from Emmerich. Technical data Article number: B212-1-L GTIN: 8680731507850 ECLASS: 21041717 ETIM: EC011973 Brand: Kukamet Core specifications Clamping force: 750 N Holding force: 1,000 N Weight: 0.155 kg Pressure spindle: M5 x 35 Features and construction Finish: black blued Mounting: vertical foot Safety lock: yes Arm: not applicable Category: Clamps / Spanner FAQ What clamping and holding forces does the clamp provide? The Vertical clamp 212 provides a clamping force of 750 N and a maximum holding force of 1,000 N, suitable for secure workholding in light industrial fixtures. Is the pressure spindle adjustable and what size is it? The tool is fitted with an M5 x 35 pressure spindle, offering fine adjustment of the contact point for small-part tolerance compensation. Can the clamp be mounted on narrow fixture plates? The vertical foot mounting is designed for compact installation on narrow plates and tight jigs, enabling overhead clamping without a large footprint. Does the clamp include a safety mechanism for vibration-prone environments? Yes, the unit features an integrated safety lock that secures the clamping position against vibration and accidental release. What surface protection is applied to the clamp? A black blued finish is applied to the clamp to provide basic corrosion resistance and a durable working surface. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
7500 N Pneumatic Pushrod Clamp 20 mm Piston, 15000 N Holding Force, Zinc-Plated - Kukamet
Take advantage of high clamping forces, a zinc‑plated corrosion‑resistant finish and a compact horizontal‑foot design to secure fixtures reliably in repetitive production tasks; order or request guidance directly through Metav Werkzeuge's consultants for a smooth integration. Pneumatic push-rod clamp 661 by Kukamet — 7,500 N push force, 20 mm piston The Pneumatic push-rod clamp 661 is a compact pneumatic clamp designed for horizontal‑foot mounting and robust fixture clamping in industrial jigs and assembly lines Max. push force 7,500 N Holding force up to 15,000 N Zinc-plated corrosion resistant Horizontal foot mounting Secure, measurable clamping performance that speeds up production The clamp delivers a clear performance profile: a push force of 7,500 N and a holding force up to 15,000 N, combined with a 20 mm piston diameter. These numerical specifications translate into repeatable clamping cycles and dependable workpiece retention under dynamic loads. Because the unit is pneumatically actuated, cycle times are shortened and process stability is improved; this is particularly relevant where fast clamp/unclamp sequences reduce overall takt time. The zinc‑plated finish contributes to long‑term reliability in workshop environments where occasional coolant or humidity exposure is present. Space‑saving installation and straightforward fixture integration The horizontal‑foot format simplifies mounting on custom jigs and existing fixture plates, while the compact footprint keeps surrounding tooling accessible. With a weight of 3.278 kg and durable construction, the clamp balances sturdiness with manageable handling during fixture assembly or repositioning. The product is identified as SKU 661-5-Q20 (GTIN 8680731503159), which aids in documentation and spare‑part management. Pneumatic actuation requires standard compressed air connections and offers low maintenance compared with fully electric alternatives, supporting a predictable total cost of ownership across many production cycles. Built for continuous operation and dependable workshop service Robust materials and a corrosion‑resistant surface mean the unit maintains performance in daily use; zinc plating reduces the need for frequent surface care. The design emphasises reliable clamping force over many cycles, making it suitable for repetitive metalworking and assembly applications where consistency is critical. Integration into automated or semi‑automated systems is facilitated by the clamp's straightforward kinematics and standard pneumatic control. Combined with Metav's role as a quality filter and supplier, this clamp supports an uninterrupted supply chain for industrial users seeking proven components. For specification advice or to secure the Kukamet pneumatic push-rod clamp 661 with 7,500 N push force, contact Metav Werkzeuge by email at info@metav-werkzeuge.com or phone +49 2822 7131930 for tailored assistance Technical data SKU: 661-5-Q20 GTIN: 8680731503159 ECLASS: 21041716 ETIM: EC011973 Brand: Kukamet Facts Max. push force: 7,500 N Max. holding force: 15,000 N Piston diameter: 20 mm Weight: 3.278 kg Special features Material: zinc-plated Mounting: horizontal foot Actuation: pneumatic FAQ What clamping forces does the clamp provide? The Kukamet pneumatic push-rod clamp 661 delivers a push force of 7,500 N and a holding force of up to 15,000 N for secure retention in demanding fixture tasks. How is the clamp mounted to a fixture? The unit is designed for horizontal foot mounting, enabling easy fixation to plates or jig bases and straightforward integration into existing tooling. What maintenance does the clamp require? Routine checks of pneumatic fittings and periodic inspection of the zinc-plated surfaces are recommended; the finish reduces corrosion and helps prolong service life of the clamp. Is the clamp suitable for automated production lines? Yes, the pneumatic actuation and compact design make the clamp well suited to repetitive cycles in semi‑automated or fully automated fixtures where reliable, rapid clamping is required. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
7500 N Pneumatic Pushrod Clamp, 20 mm Piston, Zinc-Plated Cast Body, Holding Force 18450 N - Kukamet
Take advantage of fast pneumatic actuation and high holding capacity to secure fixtures reliably while keeping maintenance low; the compact Pneumatic push-rod clamp 641 combines a robust zinc‑plated cast body with precise force control for stable production processes. Order the Pneumatic push-rod clamp 641 directly via Metav Werkzeuge or ask our consultants if needed. Pneumatic push-rod clamp 641 by Kukamet – horizontal mounting, 7,500 N push force The Pneumatic push-rod clamp 641 is a compact clamping element for horizontal fixture feet, designed to deliver consistent push and hold forces in series production and machining jigs. Pneumatic push-rod actuation 7,500 N push force 18,450 N holding force Zinc-plated cast body, 4.28 kg Faster cycles through dependable pneumatic clamping The clamp uses pneumatic actuation to provide rapid, repeatable clamping strokes that reduce cycle times in high-throughput environments. With a 7,500 N push force and an ultimate 18,450 N holding capacity, the device secures workpieces during machining and handling, limiting movement under lateral and axial loads. For production planners and workshop managers this translates into fewer rejects and a predictable clamping behaviour that supports process optimisation and consistent part quality. Built for durability and low upkeep A zinc-plated finish and cast body combine to resist corrosion and mechanical wear in demanding workshop conditions, helping to prolong service life and reduce maintenance intervals. The unit weighs 4.28 kg and uses a 20 mm piston diameter to balance compactness with force transmission. This rugged construction suits use in metalworking fixtures where long-term stability is required, and it reduces replacement frequency compared with lighter, less robust clamps. Smooth integration in fixture systems and automation Engineered for horizontal foot mounting, the push-rod design enables straightforward integration into jigs, pallets and automated workholding systems. The horizontal foot allows fixed positioning on base plates while the push-rod delivers linear actuation into the clamping plane, simplifying layout and repeatability in assembly lines. The clamp’s specification supports both manual and semi-automated setups, making it appropriate for toolrooms, subcontract machining and production cells where reliable, repeatable clamping is essential. Proven supply and service pathway for reliable uptime Sourcing from an established supplier streamlines procurement and spare-part planning. Metav’s offering emphasises dependable logistics from Emmerich and an extensive product range, making it easier to standardise on components that are available across sites. The combination of industrial-grade construction and a reliable supply chain supports operational continuity and aligns with long-term quality strategies expected by maintenance engineers and procurement teams. Contact Metav Werkzeuge for tailored advice on specifying the Kukamet Pneumatic push‑rod clamp 641 for fixtures and automated cells; Metav Werkzeuge is available from Emmerich for product supply and technical consultation – eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical Data Article number: 641-5-Q20 GTIN: 8680731503074 SKU: 641-5-Q20 Facts Weight: 4.28 kg Piston diameter: 20 mm Push force (max): 7,500 N Holding force (max): 18,450 N eClass: 21041716 ETIM: EC011973 Special features Material: zinc-plated with cast body Mounting: horizontal foot Actuation: pneumatic push-rod Manufacturer: Kukamet FAQ What clamping forces does the clamp provide? The Kukamet Pneumatic push-rod clamp 641 delivers a push force of 7,500 N and a holding capacity of 18,450 N, enabling secure retention during machining and handling. Is the clamp suitable for automated fixtures? Yes. The horizontal foot mounting and pneumatic push-rod design of the 641 are intended for integration into jigs, pallets and automated workholding systems where repeatable actuation is required. What material and surface treatment does the device have? The body is cast and zinc‑plated, offering enhanced resistance to corrosion and mechanical wear for workshop and industrial environments. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
7500N Pneumatic Plunger Clamp Three-Point Holding Force 18450N, Zinc Plated Cast Body - Kukamet
The combination of consistent 18,450 N holding force, a robust zinc-plated cast body and a compact 20 mm piston ensures dependable clamping performance and long service life; order the pneumatic push-rod clamp directly via Metav Werkzeuge or ask our consultants if further clarification is required. Pneumatic Push-Rod Clamp 671 by Kukamet — 7.5 kN thrust, 18.45 kN holding force The Pneumatic Push-Rod Clamp 671 is a horizontal-foot mounted pneumatic clamp designed for secure workpiece retention in production fixtures and jig applications. High holding force 18,450 N 7,500 N maximum thrust Zinc-plated cast body for durability Horizontal foot mount for fixture compatibility Consistent force for repeatable machining results Engineered to deliver a sustained 7,500 N thrust and a peak 18,450 N holding force, this clamp converts pneumatic input into reliable mechanical retention. The clearly defined force ratings translate directly into predictable machining outcomes, reducing rework and cycle variation. By specifying these measurable values, planners and process engineers can calculate clamping load, safety factors and fixture dimensioning with confidence, supporting efficient production planning and higher first-pass yield. Robust construction for demanding shopfloor use The cast body with zinc plating provides a corrosion-resistant exterior while preserving structural integrity under repetitive load. At 3.64 kg, the unit balances mass for stability without overburdening the fixture. The material choice and surface finish mean the clamp tolerates typical workshop environments and handling during assembly, resulting in fewer replacements and lower lifecycle disruption compared with less durable alternatives. Simple integration into fixtures and jigs Equipped with a horizontal foot mount, the clamp is intended for lateral attachment to plates and bases common in fixture design. The piston diameter 20 mm supports compact stroke design and makes the clamp suited to confined layouts where space optimisation is essential. These features reduce integration time and allow the clamp to be used in standardised tooling arrangements, shortening setup time and simplifying spare-parts management. Practical benefits for production workflows With clear identifiers such as SKU 671-5-Q20, GTIN 8680731503203, and classification codes for system planning, the clamp is ready for inventory control and machine-room documentation. The straightforward specification supports rational procurement and maintenance scheduling, while the clamp’s measured performance characteristics underpin process reliability. For companies seeking affordable precision, Metav Werkzeuge combines product availability with decades of distribution experience to make proven clamping solutions accessible across workshops and small-scale production lines. Contact Metav Werkzeuge for tailored advice and to secure the Kukamet Pneumatic Push-Rod Clamp 671 for reliable fixture clamping in your production setup. Technical Data Article number: 671-5-Q20 GTIN: 8680731503203 Manufacturer: Kukamet eClass: 21041716 ETIM: EC011973 Core Figures Maximum thrust: 7,500 N Maximum holding force: 18,450 N Piston diameter: 20 mm Weight: 3.64 kg Materials & Features Material: zinc-plated with cast body Mounting: horizontal foot Suitable for use in production fixtures and jigs SKU: 671-5-Q20 FAQ Is this clamp suitable for automated fixtures that require frequent actuation? The Kukamet Pneumatic Push-Rod Clamp 671 is specified with a 7,500 N thrust and designed for repetitive pneumatic operation, making it suitable for fixtures requiring frequent actuation under normal shopfloor conditions. What mounting options are available for the clamp? The clamp features a horizontal foot mount, enabling direct attachment to standard fixture plates and bases for lateral clamping arrangements. How does the clamp resist corrosion in a workshop environment? Construction uses a zinc-plated cast body, which offers surface protection against corrosion and improves longevity in industrial environments. Can the clamp be documented easily in procurement and maintenance systems? Yes; the unit is supplied with identifiers such as SKU 671-5-Q20 and GTIN 8680731503203, facilitating inventory control and technical documentation. What information is available for fixture designers calculating clamping loads? Designers can use the listed 7,500 N thrust and 18,450 N holding force as the basis for clamping load calculations and safety factor assessments when planning fixtures for machining or assembly. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
7500N Pneumatic Push Rod Clamping Device Horizontal Base, Zinc Plated 20mm Piston - Kukamet
Take advantage of a robust clamping solution that combines strong actuating power with high holding capacity for secure fixturing and consistent cycle performance. The zinc-plated construction and horizontal-foot mounting ensure corrosion resistance and simple integration on the shop floor — order or request an application consultation via Metav Werkzeuge for fast, reliable supply. Pneumatic push-rod clamp 621 — 7,500 N actuating force, zinc-plated (Kukamet) A Pneumatic push-rod clamp 621 engineered for horizontal-foot mounting, delivering heavy-duty holding and repeatable actuation for industrial assembly and machining operations 7,500 N actuating force 15,000 N maximum holding force 20 mm piston diameter Zinc-plated corrosion resistance Secure fixturing with measurable force and repeatability The clamp provides a measured 7,500 N actuation output and a 15,000 N maximum holding capacity, values that translate directly into secure part retention during machining and assembly. The relationship between actuating force and holding force ensures that once engaged the clamping element resists displacement under process loads; this reduces rework and stoppages. The unit’s moderate mass and compact profile contribute to predictable dynamics on moving fixtures, while the piston diameter 20 mm balances air consumption with stroke speed. Technical numbers are given for planning and ensure objective comparability across clamping solutions. Durable finish and mounting for workshop environments A zinc-plated surface treatment protects the mechanism against corrosion in humid or mildly contaminated environments, extending service intervals and preserving contact geometry. The clamp is supplied for horizontal foot mounting, which simplifies bench or fixture attachment and maintains a low profile inside assemblies. The corrosion-resistant finish combined with stable mounting reduces long-term maintenance and helps maintain consistent clamping geometry, which is essential for repeatable component alignment and surface integrity during production cycles. Efficient pneumatic integration and application versatility Designed for straightforward pneumatic control, the unit integrates with standard air-supply systems and valve configurations to enable quick cycle times and reliable actuation. The compact actuator and defined piston size support predictable air consumption, aiding compressed-air system sizing and energy budgeting. Documentation, including the catalogue page, supports installation planning and spare-part identification. As a practical partner for the workshop, Metav Werkzeuge supplies this clamp with traceable identification for procurement and inventory management, supporting a dependable supply chain for production operations. Discuss integration and delivery with Metav Werkzeuge — request application guidance for the Kukamet Pneumatic push-rod clamp 621 and ensure the clamping solution meets specific process requirements Technical Data Article number: 621-5-Q20 GTIN: 8680731502985 Model: 621 Weight: 3.86 kg Surface: Zinc-plated Manufacturer: Kukamet Key figures Max actuating force: 7,500 N Max holding force: 15,000 N Piston diameter: 20 mm eClass: 21041716 ETIM: EC011973 Features and mounting Mounting: horizontal foot Category: Spanner Files: 621-katalogseite.pdf FAQ What is the maximum holding force of this clamp? The Kukamet Pneumatic push-rod clamp 621 (SKU 621-5-Q20) provides a maximum holding force of 15,000 N for secure part retention. How much actuating force does the clamp deliver? Actuation is specified at 7,500 N, which describes the push force generated by the pneumatic piston when energised. What piston size does the clamp use? The device is fitted with a 20 mm piston diameter, a dimension that influences air consumption and stroke characteristics. Which mounting method is provided for fixture attachment? The clamp is designed for horizontal foot mounting, allowing straightforward attachment to benches and fixtures. Is the clamp suitable for environments with humidity or splash? The unit features a zinc-plated surface for improved corrosion resistance in typical workshop conditions. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
7500N Push Rod Clamp With 20mm Piston, Horizontal Foot, Zinc‑Plated Cast Body, 18.45kN Hold Force - Kukamet
Take advantage of a compact, workshop-ready clamp that combines a high holding force of 18,450 N with an adjustable pressing force of 7,500 N and a zinc-plated cast body for long service life; order directly via Metav Werkzeuge or ask their consultants for application advice. Push-rod clamp 532 by Kukamet — horizontal foot, 7,500 N pressing force The Push-rod clamp 532 is a compact workholding clamp designed for horizontal mounting in fixtures and machine tables, delivering reliable clamping and simple adjustment for repeatable setups. Horizontal-foot mounting for stable anchoring Holding force up to 18,450 N Zinc-plated cast body for corrosion resistance Robust clamping for demanding fixtures The clamp provides a pronounced holding force of 18,450 N while the adjustable pressing force reaches 7,500 N, ensuring secure retention of parts during machining, assembly or testing. The distinction between holding and pressing force is important: the pressing force is the active contact load applied by the spindle, whereas the holding force represents the clamp’s capacity to withstand opposing loads. These characteristics support shorter cycle times and fewer re-clamps, contributing to measurable productivity gains in repetitive production tasks. Precise adjustment and reliable positioning Designed with a horizontal foot for straightforward bench or plate mounting, the unit includes an M12x80 pressure spindle that allows fine adjustment of clamping travel and force. The actuator uses a 20 mm piston, which balances compactness with a stable contact face; the result is predictable clamp behaviour and reduced set-up variation. Where fixture space is limited, the horizontal mounting arrangement simplifies integration and alignment with locating elements. Built for everyday workshop endurance The clamp’s zinc-plated cast body gives corrosion resistance and mechanical robustness for regular use in industrial environments. With a mass of 2.87 kg, the component is heavy enough to remain stable once fixed, yet light enough for handling during bench assembly and fixture configuration. The combination of coated cast material and engineered internals reduces maintenance intervals and supports long-term reliability in frequent clamping cycles. Straightforward integration into production workflows Compatibility with common fixture plates and the compact footprint make this model suitable for small-batch production and repair-shop applications alike. Identification data such as the SKU and GTIN enable easy ordering and inventory tracking, and the clamp’s mechanical specification supports rapid engineering checks during fixture design. For integration queries or to verify mounting details, consult Metav Werkzeuge for clear guidance on assembly and part matching. For fast supply and technical advice on the Kukamet push-rod clamp 532, contact Metav Werkzeuge in Emmerich: eMail info@metav-werkzeuge.com or phone +49 2822 7131930 Technical data Article number: 532-5-Q20 GTIN: 8680731504484 Manufacturer: Kukamet Facts Weight: 2.87 kg Max. pressing force: 7,500 N Max. holding force: 18,450 N Piston diameter: 20 mm Special features Material: zinc-plated cast body Mounting: horizontal foot Pressure spindle: M12x80 eCl@ss: 21041716 ETIM: EC011973 FAQ How much clamping force does the push-rod clamp provide? The Kukamet push-rod clamp 532 offers a maximum holding force of 18,450 N and a maximum pressing force of 7,500 N for secure workpiece retention. Which mounting arrangement is required for the clamp? The clamp is fitted for horizontal-foot mounting; the horizontal foot enables stable anchoring on fixture plates and machine tables for repeatable positioning. What adjustment options are available on this model? Adjustment is provided via an M12x80 pressure spindle, permitting precise setting of the contact position and applied pressing force on the push-rod clamp 532. Is the clamp suitable for harsh workshop conditions? The zinc-plated cast body gives corrosion resistance and mechanical durability, making the clamp appropriate for regular use in industrial workshop environments. Where can the clamp be ordered or further technical details obtained? Technical enquiries and orders for the Kukamet push-rod clamp 532 (SKU 532-5-Q20) can be handled through Metav Werkzeuge, who can also advise on mounting and integration. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
7500N Push Rod Clamp, Horizontal Foot, Zinc-Plated Cast Body, Piston Ø20mm, Holding Force 18450N - Kukamet
Take advantage of robust clamping performance and durable construction to keep production running with minimal downtime; the combination of high holding force, galvanised cast-body durability and precise spindle adjustment ensures dependable results. Order through Metav Werkzeuge or consult the sales team for specification matching. Kukamet Schubstangenspanner 536 — push-pull rod clamp with 7,500 N clamping force The 536 push-pull rod clamp is a compact industrial clamp designed for repetitive fixture and holding tasks in workshop and production environments, offering a galvanised cast body and horizontal-foot mounting for secure installation Galvanised cast body Holding force 18,450 N Clamping force 7,500 N Horizontal foot mounting Consistent clamping power for reliable cycle times The clamp delivers a holding force of 18,450 N and a maximum clamping force of 7,500 N, making it suitable for high-demand fixture applications where repeatability matters. These values indicate the static retention and the active pressure the device applies during clamping; higher numbers translate into reduced slippage and longer-term stability on repetitive jobs. For production lines that require predictable part retention, the robust force figures contribute directly to reduced rework and improved throughput. Durable construction that reduces maintenance interruptions Constructed with a galvanised cast body, the unit resists corrosion and mechanical wear associated with daily use in industrial settings. The piston diameter of 20 mm provides compact actuation with reliable force transmission, while the moderate mass (approx. 2.87 kg) balances solidity with easy handling during installation. A cast chassis paired with protective galvanisation helps extend service intervals and lowers the likelihood of premature component replacement, supporting a steady and economical production flow. Flexible mounting and fine adjustment for precise setups The clamp features a horizontal foot mounting style for straightforward bench or fixture attachment and an M12 x 80 pressure spindle for fine clamping-distance adjustment. Horizontal-foot mounting allows the clamp to be positioned close to the workpiece and integrated into jigs with minimal interference. The threaded pressure spindle enables precise setting of the grip point and compensates for part tolerances, simplifying setup and reducing cycle time during changeovers. Contact Metav Werkzeuge today to discuss suitability for specific assembly tasks or to request detailed technical comparisons tailored to production requirements Technical Data SKU: 536-5-Q20 GTIN: 8682843521281 Manufacturer: Kukamet Facts Holding force: 18,450 N Clamping force (max): 7,500 N Piston diameter: 20 mm Weight: 2.87 kg Pressure spindle: M12x80 ECLASS: 21041716 ETIM: EC011973 Special features Galvanised with cast body Horizontal foot mounting Category: Spanner Mounting type: horizontal foot FAQ What materials is the clamp suitable for? The Kukamet push-pull rod clamp 536 is a mechanical clamping device; material compatibility depends on fixture design rather than the clamp itself. The clamp’s high holding force makes it appropriate for securing metal workpieces in machining and assembly jigs. How is the clamping force adjusted? Adjustment is performed via the M12 x 80 pressure spindle, allowing precise travel and contact pressure setting. The spindle permits fine-tuning of the grip point for different part thicknesses. What are the primary installation considerations? The clamp uses a horizontal-foot mounting arrangement; adequate support and correct orientation on the jig plate ensure optimal force transmission and long-term reliability. Is the product resistant to workshop conditions? Yes, the unit’s galvanised cast body offers enhanced corrosion resistance and mechanical durability appropriate for standard workshop and industrial environments. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
750N Vertical Clamp 1000N Holding Force M5x35 Spindle Safety Lock Zinc Plated - Kukamet
The combination of a 750 N clamping force, 1,000 N holding capacity and a robust safety lock delivers dependable, space-saving workholding for jigs and fixtures; the zinc-plated finish extends service life in workshop conditions. Order the clamp directly via Metav Werkzeuge or consult our specialists for integration advice. Vertikalspanner 212 – Vertical clamp with 750 N clamping force and safety lock (Kukamet) The Vertikalspanner 212 is a compact vertical clamp for reliable fixture and jig workholding in production and maintenance environments Zinc-plated corrosion protection 750 N clamping force 1,000 N holding capacity Safety lock for secure clamping Consistent, measurable clamping performance for production The vertical clamp provides a defined 750 N maximum clamping force and a 1,000 N holding capacity, values that translate into consistent fixture behaviour under repeat loads. These numeric characteristics mean faster set-ups and fewer process interruptions, making the device suitable for small-batch manufacturing and assembly stations where reproducible clamping pressure is required. The clear force specification supports process planning and risk assessment when integrating the clamp into fixtures and test rigs. Durable finish and compact installation save space and maintenance time Finished in zinc-plated steel, the unit resists corrosion and keeps maintenance intervals long even in humid workshop atmospheres. The vertical foot mounting enables a compact footprint on fixtures and plates, allowing closer packing of clamps in tight jigs. The lightweight construction (approx. 0.155 kg) supports easy handling and retrofitting without heavy mounting hardware. The fitted spindle (M5x35) provides standardised adjustment and simplifies replacement if required. Secure locking and safe handling for production environments Equipped with an integrated safety lock, the clamp prevents accidental release during handling and machining operations, reducing the risk of workpiece movement and downtime. The lever-clamp design offers rapid actuation combined with mechanical security, which supports safe routine use on shop floors and assembly benches. This security feature contributes to operator confidence and supports compliance with common workshop safety practices. Clear applications and simple integration into fixtures Designed for jig and fixture applications, the clamp suits assembly, welding fixtures and test benches where a stable vertical hold is needed. Its lever-style mechanism ensures quick clamping cycles while the precise force data aids in choosing appropriate counterparts and stop pins. For procurement and systems integration the compact format, quantifiable mechanical data and zinc protection simplify specification sheets and spare-part planning. For secure, safety-locked workholding from Kukamet, contact Metav Werkzeuge in Emmerich for tailored advice and fast delivery: info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: 212-1-L GTIN: 8680731501490 eClass: 21041717 ETIM: EC011973 Facts Clamping force max: 750 N Holding force max: 1,000 N Weight: 0.155 kg Spindle: M5x35 Special features Material: zinc-plated Mounting: vertical foot Safety lock: yes Arm: not applicable Style: lever clamp FAQ What is the maximum clamping force of the Vertikalspanner 212? The Vertikalspanner 212 delivers a maximum clamping force of 750 N, with a holding capacity of 1,000 N, suitable for many jig and fixture tasks. Is the clamp protected against corrosion? Yes, the unit is zinc-plated, providing enhanced corrosion resistance for workshop and light industrial environments. Can the clamp be mounted on existing fixture plates? The clamp uses a vertical foot mounting that permits integration into standard fixture plates and jigs; the M5x35 spindle offers standard fastener compatibility. Does the clamp include a safety mechanism? The Vertikalspanner 212 features an integrated safety lock to prevent accidental release during operation, improving process safety. Which applications are typical for this clamp? Typical uses include assembly fixtures, test rigs and welding jigs where compact, reliable vertical clamping is required; the lever-clamp style supports quick cycle times. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
750N Vertical Clamp 1000N Holding Force Stainless Steel, Safety Lock - Kukamet
Take advantage of a compact clamp that combines stainless steel construction, a safety locking mechanism and a high holding capability to secure fixtures reliably; order the unit directly via Metav Werkzeuge or consult their specialists for specification advice. Vertikalspanner 212 — Vertical clamp with safety lock and stainless steel construction by Kukamet The Vertikalspanner 212 is a compact vertical clamp designed for secure fixture holding in production and assembly environments, offering a robust safety locking function and corrosion-resistant material. Stainless steel construction Built-in safety locking mechanism Vertical foot mounting for stability Clamping force up to 750 N Reliable clamping performance for repetitive production tasks This vertical clamp delivers consistent force for repetitive clamping operations, with a clamping force of 750 N and a holding force of 1,000 N specified to maintain workpiece position under load. The difference between clamping and holding values indicates the device’s rated closing force and its maximum static retention capacity; this distinction supports engineers when selecting the right component for fixtures subjected to vibration or side loads. The robust specification reduces rework and helps maintain cycle-time stability on production lines. Safety and handling designed to protect processes and operators A decisive mechanical safeguard is the integrated safety lock, which secures the lever in the closed position to prevent unintended release during machining or handling. The clamp’s vertical foot attachment provides a stable mounting interface, simplifying positioning on tooling plates or machine beds. For adjustments, the clamp is fitted with a contact spindle M5 x 35, allowing fine contact pressure settings without the need for special tools. These features together reduce the risk of accidental part movement and contribute to safer plant operation. Corrosion resistance and long service life in demanding environments Constructed from stainless steel, the clamp withstands humid and mildly corrosive workshop atmospheres better than zinc-plated alternatives, extending service intervals and lowering lifetime maintenance needs. The compact design and lightweight build make it suitable for fixtures where mass matters, while the durable material supports frequent cycles and cleaning. Choosing corrosion-resistant components is a pragmatic way to protect fixture investments and to ensure consistent part quality over time. Specification guidance for integration into assemblies The clamp is supplied as model S212-1-L and suits applications that require a locked vertical toggle solution for medium loads. Its compact footprint and clear numerical ratings simplify CAD integration and bill-of-materials (BOM) entries. For selection, compare the rated 750 N clamping force with the required clamping torque and expected process loads; if fixtures must resist lateral forces or high-impact events, consider supplementary locating elements in addition to the clamp. Metav’s guidance helps align component choice with production requirements. Specify the Kukamet vertical clamp S212-1-L with confidence — contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or +49 2822 7131930 for ordering and technical assistance Technical Data Article number: S212-1-L GTIN: 8680731509199 Manufacturer: Kukamet Brand: Kukamet ECLASS: 21041717 ETIM: EC011973 Facts Clamping force (max): 750 N Holding force (max): 1,000 N Weight: 0.155 kg Contact spindle: M5 x 35 Special features Material: stainless steel Mounting type: vertical foot Safety locking mechanism: yes Arm: not applicable Storytrigger: toggle clamp FAQ What clamping capacity does this vertical clamp provide? The clamp offers a clamping force up to 750 N and a holding capacity of 1,000 N, which is suitable for moderate-duty fixture tasks with consistent retention requirements. Is the clamp suitable for use in humid or corrosive workshop environments? Yes, the stainless steel construction of the vertical clamp provides improved corrosion resistance compared with plated alternatives, supporting longer service life in such conditions. How is the clamp adjusted and fixed in position? Adjustment is performed via the contact spindle (M5 x 35), and the integrated safety locking mechanism secures the lever in the closed position to prevent accidental release. Can the clamp be mounted on tooling plates or machine beds? The clamp is designed for vertical foot mounting, enabling stable attachment to tooling plates, fixtures and machine beds where a vertical toggle action is required. What is the exact model designation for ordering? Order the unit under SKU S212-1-L; the product is supplied as a compact vertical clamp from Kukamet with the described safety and material features. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
750N Vertical Clamp 1000N Holding Force, Angle Base, Safety Lock, Black Oxide Finish - Kukamet
Take advantage of a compact clamp that combines 750 N clamping force with a safety lock for secure part retention and predictable cycle performance; its angle-base mounting and lightweight design simplify fixture retrofits. Order the unit directly via Metav Werkzeuge or consult our team for integration advice. Vertical toggle clamp 213 by Kukamet — 750 N clamping force, safety lock A vertical toggle clamp 213 designed for secure vertical clamping in fixtures and jigs, offering a compact lever-style solution for assembly and production work Safety lock for secure locking 750 N clamping force 1000 N holding capacity Angle-base mounting for stable installation Consistent holding and controlled clamping force The clamp delivers a defined 750 N clamping force, ensuring repeatable part fixation and reduced rework in serial production. The integrated safety lock prevents unintended release during handling or machine cycles, which helps maintain process stability and minimises downtime. In practice, the clearly stated clamping value supports planning of fixture layouts and force budgets in jigs and assembly stations. Compact mounting and easy retrofitting With an angle-base mounting and a M5 x 35 spindle, the unit is built for simple integration into existing fixtures. Its low mass (approx. 0.17 kg) and compact lever geometry allow installation where space is limited, saving load space on the workpiece and facilitating quick retrofit operations. The standard spindle thread permits straightforward adjustment and replacement using common tooling. Workshop-ready finish for durable use The component features a blackened finish that gives the surface enhanced resistance to everyday workshop wear and minor corrosion compared with unfinished steel. The lever-style design is robust and requires minimal maintenance; occasional lubrication of the pivot points preserves smooth operation and extends service life. This makes the clamp suitable for high-frequency cycles in manufacturing and assembly environments. Integration into fixtures and increased process reliability As a lever clamp, the product combines a positive locking action with a 1000 N holding force, providing safety margin for many clamping applications. Its compact footprint supports dense fixture layouts and automated tooling where secure vertical hold is required. The result is a practical improvement in throughput and operator confidence, as parts remain precisely located throughout machining or assembly steps. Contact Metav Werkzeuge to discuss how the Kukamet vertical toggle clamp 213 can be specified for existing fixtures and to arrange prompt delivery from Emmerich Technical data SKU: B213-1-L GTIN: 8680731507959 Manufacturer: Kukamet Core technical values Weight: 0.17 kg Max clamping force: 750 N Max holding force: 1000 N Spindle: M5 x 35 mm eClass: 21041717 ETIM: EC011973 Special features Angle-base mounting (Winkelfuß) Safety lock integrated Lever clamp design Blackened finish (Schwarz brüniert) Designation: vertical clamp 213 FAQ What clamping force does the clamp provide? The Kukamet vertical toggle clamp 213 provides a clamping force of 750 N and a holding capacity of 1000 N for secure part retention. How is the clamp mounted to a fixture? Mounting is via an angle base; the clamp is designed for stable installation on angled or flat fixture surfaces using the supplied fixing pattern. What spindle specification is used for adjustment? Adjustment is made with an M5 x 35 mm spindle, allowing fine setting of the pressure point and straightforward replacement. Is the clamp suitable for high-frequency production use? Yes, the lever-style construction and durable blackened finish make the unit suitable for repeated cycles in assembly and production settings. What is the item number or SKU for ordering? The product is listed as SKU B213-1-L (vertical toggle clamp 213) for ordering and inventory management. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
750N Vertical Clamp 1000N Holding Force, M5x35 Spindle, Blackened Finish - Kukamet
Compact, adjustable clamping performance combined with a corrosion-resistant finish and a low mass makes this device ideal for light-duty fixtures; order the Vertical clamp 212 (B212-1) directly via Metav Werkzeuge or ask our consultants if needed. Vertical clamp 212 (B212-1) — Kukamet, 1,000 N holding force Vertical clamp 212 (B212-1) designed for vertical mounting in jigs and light assembly fixtures, offering a compact footprint and precise adjustment with an M5x35 pressure spindle 1,000 N holding force 750 N clamping force Adjustable pressure spindle M5x35 Blackened finish, 0.155 kg weight Dependable holding power for light fixtures The clamp delivers a clear performance profile: a holding force of 1,000 N and a clamping force of 750 N, enabling secure retention of workpieces in assembly and jigging operations. The distinction between holding and clamping force is important for fixture design: the higher holding value indicates the device’s resistance to separation once engaged, while the clamping figure describes the maximum compressive force applied. These figures support rational decision-making when selecting a small, robust clamping element for production or repair work, helping to minimise rework and downtime. Space-saving design with fine adjustment A low mass of 0.155 kg and a compact base make the unit simple to integrate into constrained setups. The pressure spindle M5x35 allows fine height adjustment so that variable part tolerances can be compensated without additional shims. The clamp is supplied with a vertical foot mounting, which simplifies upright installation on jigs and fixture plates. Surface protection is provided by a blackened finish, which reduces visible wear and provides basic corrosion resistance while keeping the visual impact minimal. Practical suitability and workshop reliability Designed for everyday workshop use, this clamping device combines straightforward functionality with robust performance metrics, making it suitable for small-batch production, prototyping and maintenance fixtures. The compact and adjustable nature supports repeatable set-up routines, improving cycle consistency. Supplied under the Kukamet designation and stocked for prompt dispatch, the product benefits from Metav’s established supply chain and quality filter in Emmerich, which enhances availability and reduces procurement complexity for the workshop. For ordering or detailed technical questions about the Kukamet vertical clamp 212 (B212-1), contact Metav Werkzeuge in Emmerich by e‑mail or phone to consult our product specialists and ensure correct integration into existing fixtures Technical data SKU: B212-1 GTIN: 8680731505405 eClass: 21041717 ETIM: EC011973 Facts Holding force max: 1,000 N Clamping force max: 750 N Weight: 0.155 kg Pressure spindle: M5x35 Design & features Material / finish: blackened (Schwarz brüniert) Mounting: vertical foot Special features: none Category: clamp FAQ What holding and clamping forces does the device provide? The Vertical clamp 212 (Kukamet B212-1) offers a holding force of 1,000 N and a clamping force of 750 N, suitable for light-duty fixture retention. How is the clamp mounted on a fixture? Mounting is via a vertical foot, designed for upright attachment to fixture plates and jig bases. Is height adjustment possible for different workpiece tolerances? Yes, the pressure spindle M5x35 provides fine height adjustment to adapt to varying part dimensions. What surface protection does the clamp use? A blackened finish (Schwarz brüniert) gives basic corrosion resistance and a uniform appearance for workshop environments. Which applications suit this clamp best? The clamp is intended for jigs, small assembly fixtures and light production or maintenance tasks where compact, adjustable holding is required. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
750N Vertical Clamp 138mm Arm, Massive Holding Arm with Safety Lock, Blackened Finish - Kukamet
Combining a compact 138 mm arm with a massive holding arm and a safety locking mechanism ensures reliable, repeatable clamping in small fixtures; benefit from a low overall weight and clearly defined clamping and pressing forces for consistent production. Order directly via Metav Werkzeuge or consult our advisers for integration advice. Vertical Toggle Clamp 213 – sturdy holding arm and safety lock (Kukamet) The Vertical Toggle Clamp 213 is a compact vertical clamp designed for secure workpiece retention in fixtures, jigs and assembly aids, offering defined clamping and pressing forces for small-scale industrial applications Massive holding arm with safety lock Compact 138 mm arm length Max holding force 1,000 N Blackened finish, lightweight 0.15 kg Secure, measurable clamping for reliable cycles The clamp delivers defined performance values with a max holding force of 1,000 N and a max pressing force of 750 N, which supports predictable fixture behaviour and cycle planning. Translating these figures into workflow terms, the component provides consistent workpiece retention under repeat operations, reducing rework caused by shifting parts. The compact footprint and precise force ratings enable straightforward process documentation and integration into existing production routines, contributing to greater throughput stability without complex setup. Robust design reduces maintenance and downtime A massive holding arm combined with a safety locking mechanism gives mechanical security during handling and machining operations. The clamp’s blackened finish offers surface protection while keeping the unit lightweight at 0.15 kg, which lowers the static load on jigs and makes handling during assembly easier. The angled base mount (Winkelfuß) is intended for fixed installation on plates and fixture frames, enabling fast, repeatable positioning. Components are designed for low-maintenance operation, so routine checks focus on hinge lubrication and lock engagement rather than frequent part replacement. Built for workshop practicality and productive setups This vertical toggle model suits workshop and light-production environments where compact, repeatable clamping is required. The short arm length of 138 mm supports space-saving fixture layouts while the clearly stated force values simplify selection for specific tasks. The mechanical safety lock prevents accidental opening, improving operator confidence and reducing interruption. Lightweight construction and a simple mounting concept allow fast retrofitting into existing jigs, making the clamp a pragmatic choice for assembly, testing and small-series manufacturing where reliability and ease of use are priorities. Contact Metav Werkzeuge to discuss how the Vertical Toggle Clamp 213 from Kukamet can be integrated into existing fixtures; our Emmerich-based team will provide practical advice and delivery options. Technical Data Article number: B213-1-D-L-C3 SKU: B213-1-D-L-C3 Manufacturer: Kukamet Type designation: Vertikalspanner 213 eClass: 21041717 ETIM: EC011973 Facts Arm length: 138 mm Max pressing force: 750 N Max holding force: 1,000 N Weight: 0.15 kg Special features Massive holding arm and safety locking mechanism Mounting type: angled base (Winkelfuß) Finish: blackened (Schwarz brüniert) Catalogue page: 211-212-213-l-katalogseite.pdf FAQ How much holding force does the clamp provide? The Vertical Toggle Clamp 213 offers a maximum holding force of 1,000 N, giving measurable retention suitable for many light industrial fixtures. Is the clamp suitable for compact fixture layouts? Yes, the 138 mm arm length of the Kukamet vertical clamp is designed for space-saving installations and tight jig arrangements. What mounting method is used for attachment? The unit is supplied for installation with an angled base mount (Winkelfuß), allowing secure fixation to fixture plates and frames. Does the clamp include a safety mechanism to prevent accidental release? A mechanical safety locking mechanism is integrated to prevent unintended opening, enhancing process safety during handling and machining. What is the surface treatment and how does it affect use? The clamp features a blackened finish, which provides surface protection while keeping the component lightweight for easy handling. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
750N Vertical Clamp 138mm Arm, Massive Holding Arm with Safety Lock, Galvanised - Kukamet
Take advantage of a compact, corrosion-resistant clamping solution: a zinc-plated construction with a 138 mm arm delivers stable workholding with up to 1,000 N holding force while the integrated safety lock and robust arm ensure secure operation; order the unit directly via Metav Werkzeuge or consult our specialists for technical advice. 213 Vertical clamp by Kukamet — zinc-plated, 1,000 N holding force The 213 Vertical clamp is a compact, zinc-plated clamping device designed for secure workholding in jigs, fixtures and light assembly applications. Zinc-plated finish for corrosion resistance 138 mm compact holding arm Up to 1,000 N holding force Integral safety lock and robust arm Stable clamping in compact fixtures for reliable production The clamp is designed to provide a dependable clamping solution where space is limited. The 138 mm arm and lightweight build (approx. 0.15 kg) make it suitable for tight jigs and rapid-change fixtures while maintaining a high holding force. The relationship between the 750 N actuation force and the 1,000 N holding force means the device converts operator or actuator input into a secure grip on the workpiece; this ensures consistent repeatability across assembly cycles and reduces rework caused by slippage. The zinc-plated finish adds corrosion resistance, extending service life in workshop environments. Easy mounting and secure operation to reduce downtime An angle base mounting simplifies installation on fixture plates and welded frames, enabling quick integration into existing production setups. The clamp’s robust arm and safety lock provide mechanical security once set, preventing unintended release during handling or machining. This mechanical interlock is particularly beneficial for automated or semi-automated lines where loss of clamp position would halt production. The compact lever-clamp design supports fast actuation and straightforward maintenance, creating operational efficiencies on the shop floor. Durable design that supports consistent throughput and peace of mind Constructed with durable materials and a solid holding arm, the unit is built to withstand repetitive cycles typical of industrial use. Reduced maintenance demands and a corrosion-resistant coating contribute to a lower total cost of ownership by keeping fixtures operational for longer periods. The clamp’s straightforward mechanics make inspection and replacement simple, which helps to preserve throughput and schedule reliability. For buyers seeking a pragmatic, well-engineered clamping element, the combination of mechanical strength and compact form factor supports both performance and confidence in daily operations. For supply information or application guidance for the Kukamet 213, contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or +49 2822 7131930 for prompt, expert assistance. Technical data SKU: 213-1-D-L-C3 GTIN: 8682843520338 Manufacturer: Kukamet Weight: 0.15 kg Arm length: 138 mm Material finish: Zinc-plated Core values Holding force: 1,000 N Actuation/closing force: 750 N ECLASS: 21041717 ETIM: EC011973 Special features Angle base mounting Robust holding arm (massive arm) Integral safety lock (Sicherheitsverriegelung) Lever-clamp type (hebelspanner) FAQ Is the 213 suitable for fixture and jig use? Yes. The 213 Vertical clamp by Kukamet is designed for jigs, fixtures and light assembly tasks where a compact, reliable clamping element is required. What mounting method does the clamp use? The clamp is supplied with an angle base mounting, enabling straightforward attachment to fixture plates and frames. How much clamping force is available? The device provides up to 1,000 N holding force with a 750 N actuation force rating for the clamping mechanism. Does the clamp include a safety feature to prevent accidental release? Yes. The 213 includes a robust holding arm and an integrated safety lock to secure the clamp in the closed position. What finish and materials are used to ensure longevity? The clamp features a zinc-plated finish for corrosion resistance and a solid holding arm designed for repetitive industrial use. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
750N Vertical Clamp 38mm Arm, Massive Holding Arm with Safety Lock, Black Oxide Finish - Kukamet
Take advantage of robust clamping with a 38 mm solid holding arm, combined with a safety latch and an angle base for flexible mounting; the result is reliable vertical workholding with low weight for easy integration. Order the vertical clamp directly via Metav Werkzeuge or ask our consultants for application advice. Vertical clamp 213 by Kukamet — 38 mm arm, safety latch Vertical clamp 213 is a compact vertical clamping device designed for secure workholding in jigs and fixtures across light to medium-duty production environments. Solid 38 mm holding arm Safety latch for reliable locking Angle base for flexible mounting Up to 1,000 N holding force Secure holding for repetitive production tasks The clamp delivers consistent clamping performance through a massive holding arm that resists bending and wear, ensuring reproducible results in repetitive operations. The combination of a substantial arm and a positive safety latch reduces the risk of accidental release, which improves process reliability and lowers scrap rates. This makes the clamp particularly suitable for small fixtures, test rigs and assembly stations where secure, repeatable retention is essential. Simple integration and space-saving mounting With an angle base fixation and a compact footprint, the device integrates smoothly into benches, modular fixturing systems and machine tables. The 38 mm arm length allows close-proximity clamping without obstructing adjacent tooling, while the low mass of 0.15 kg minimises added load on moving subassemblies. The blackened finish gives corrosion resistance and a neutral appearance that matches industrial environments, helping to maintain a tidy and durable work area. Clear technical properties that aid planning Key numerical values support planning and comparability: holding force 1,000 N and clamping force 750 N define application limits and inform cycle speed and clamp spacing. The compact construction and defined mounting style enable straightforward CAD accommodation and predictable dynamic behaviour during automated sequences. For workshops seeking economical, robust components, the clamp offers a transparent balance of performance and ease of use. For secure and economical vertical workholding, request the Kukamet Vertical clamp 213 via Metav Werkzeuge or contact our specialists at Metav Werkzeuge for tailored installation support and technical data: info@metav-werkzeuge.com / +49 2822 7131930 Technical data Article number: B213-1-D-L-C1 Manufacturer: Kukamet SKU: B213-1-D-L-C1 eClass: 21041717 ETIM: EC011973 Facts Arm diameter/width: 38 mm Maximum holding force: 1,000 N Maximum clamping force: 750 N Weight: 0.15 kg Special features Angle base mounting Massiver Haltearm und Sicherheitsverriegelung (massive holding arm and safety latch) Finish: blackened FAQ What materials is the clamp suitable for? The Vertical clamp 213 by Kukamet is intended for general workshop use; material-specific suitability depends on fixture design and clamping parameters rather than the clamp itself. How much clamping and holding force does this clamp provide? The Kukamet Vertical clamp 213 offers up to 750 N clamping force and 1,000 N holding force (SKU B213-1-D-L-C1), values that help define safe workpiece sizes and spacing. Can the clamp be mounted directly to a modular fixture plate? Yes, the angle base and compact footprint allow direct mounting to fixture plates and machine tables for streamlined integration in jigs and assembly stations. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
750N Vertical Clamp 44mm Arm, Massive Holding Arm with Safety Lock, Blackened Finish - Kukamet
Take advantage of the 44 mm arm, up to 750 N clamping force and integral safety locking for dependable, repeatable workholding; compact design and a horizontal mounting foot simplify fixture integration. Order the clamp directly via Metav Werkzeuge or ask the Metav consultants for application advice. Vertical clamp 211 — Kukamet vertical clamp with 44 mm arm and safety lock The Vertical clamp 211 is a robust workholding device for fixtures and jigs, combining a compact 44 mm arm with a horizontal mounting foot for secure, space-saving installation. Compact 44 mm arm for tight setups High clamping force up to 750 N Integral safety locking mechanism Blackened finish for discreet protection Secure, measurable clamping for reliable production The clamp delivers a clear performance advantage through its defined force ratings: 750 N maximum clamping force and a holding force of 1,000 N, values that support predictable clamping behaviour and repeatable fixture cycles. The short 44 mm arm minimises intrusion into the working area while the compact weight of 155 g keeps the overall fixture light. These objective data points reduce setup time and help to standardise process parameters in batch production or repetitive assembly tasks. Robust construction and safe operation reduce downtime A massive holding arm and a dedicated safety locking feature prevent accidental release during machining or handling, lowering the risk of rework and workplace incidents. The clamp uses a lever-style action for rapid engagement and release, enabling faster clamping cycles compared with screw actuated alternatives. The blackened finish offers a practical protective layer that reduces glare and blends into a workshop environment while preserving the metal surface against light abrasion. Easy integration into fixtures with low maintenance needs Mounting is straightforward using the horizontal mounting foot, which suits bench fixtures, jigs and production sleds where a vertical toggle is required. Minimal routine maintenance — periodic lubrication of the pivot and a quick inspection of the lock — keeps the clamp operational for long service intervals. The compact design and solid build make this clamp suitable for constrained spaces and modular fixture systems, providing consistent clamping without adding unnecessary bulk. For specialised setups or bespoke fixture advice, the Kukamet clamp is a reliable component in professional workholding assemblies. Contact Metav Werkzeuge for tailored fixture recommendations and secure the Kukamet Vertical clamp 211 for precise, repeatable workholding in your workshop. Technical Data Article number: B211-1-D-L-C1 Brand: Kukamet Category: Spanner eClass: 21041717 ETIM: EC011973 Key figures Arm: 44 mm Maximum clamping force: 750 N Maximum holding force: 1,000 N Weight: 0.155 kg Special features Mounting: horizontal foot Finish: blackened finish Massive holding arm Safety locking mechanism Lever-style operation SKU: B211-1-D-L-C1 FAQ What maximum force can the clamp provide? The clamp offers a maximum clamping force of 750 N and a holding force of 1,000 N as specified for the Vertical clamp 211. How is the clamp mounted? The device is fitted via a horizontal mounting foot, designed for secure attachment to fixtures and jigs. Does the clamp include a safety mechanism? Yes, the Vertical clamp 211 features an integrated safety locking system to prevent unintended release during operations. What maintenance is required to keep the clamp reliable? Routine maintenance includes lubrication of pivot points and periodic checks of the safety locking and lever function to ensure consistent operation. Is the clamp suitable for compact fixtures? The short 44 mm arm and light weight (0.155 kg) make this clamp well suited to compact and modular fixture designs. Manufacturer: Kukamet; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
750N Vertical Clamp 44mm Arm, Solid Holding Arm with Safety Lock, 1000N Hold Force - Kukamet
Taking advantage of a robust 44 mm arm, 750 N clamping force and a space-saving vertical foot mount secures reliable workholding in jigs and fixtures; order the clamp directly via Metav Werkzeuge or consult our specialists for application advice. Vertikalspanner 212 — vertical clamp with 44 mm arm and safety lock (Kukamet) The Vertikalspanner 212 is a compact vertical clamp designed for secure workpiece retention in jig, fixture and assembly applications where a low profile and dependable locking are essential. Massive holding arm with safety lock Vertical foot mount for compact installation Clamping force up to 750 N, holding force 1,000 N Blackened finish, robust construction Reliable clamping performance for repeatable production The 212 model delivers measured performance through its defined clamping force and holding force, offering up to 750 N and 1,000 N respectively. These figures indicate the device’s capacity to generate and maintain pressure during processing and handling, which translates into fewer re-clamps and steadier throughput on production lines. The specification-driven design reduces setup variability and supports consistent part quality in small-batch and series production. Compact mounting that saves fixture space Designed for vertical mounting with a vertical foot, the clamp occupies minimal lateral space on fixtures and jigs. The compact footprint paired with a 44 mm arm allows integration into tight assemblies and tool stations where access and clearance are limited. This combination supports denser fixture layouts and can shorten cycle times by allowing multiple clamps to be positioned close to the workpiece without interference. Safety and durability engineered into the mechanism A massive holding arm and integrated safety lock provide mechanical reliability and user confidence during repetitive operations. The safety lock prevents accidental release under vibration or when the clamp is loaded, lowering the risk of workpiece displacement. Construction in a blackened finish enhances surface resistance to wear and provides a protective layer against handling marks in workshop environments. Simple specification that aids selection and maintenance With straightforward, measurable properties such as arm size, forces and mass, the clamp is easy to specify in bill of materials and tooling lists. The low mass supports quick manual positioning during setup, while the clear numeric ratings help engineering teams select the right component for expected loads. Where higher durability is required, the robust build and finish provide a basis for predictable lifetime performance. Ideal for jigs, fixtures and assembly benches The clamp’s profile and locking features make it suitable for repetitive assembly tasks, soldering fixtures, and light machining jigs where secure holding without bulky fixtures is required. The combination of compact mounting, defined force ratings and mechanical locking improves operator efficiency and contributes to predictable process outcomes in workshop and light industrial environments. For reliable clamping solutions from a trusted supplier, contact Metav Werkzeuge to specify the Kukamet 212 vertical clamp for your fixture needs and request application guidance from our technical advisors Technical Data Article number: B212-1-D-L-C1 Manufacturer: Kukamet Model: 212 Category: Spanner eClass: 21041717 ETIM: EC011973 Facts Arm: 44 mm Maximum clamping force: 750 N Maximum holding force: 1,000 N Weight: 0.125 kg Special features Massive holding arm Safety lock Vertical foot mounting Finish: blackened FAQ What is the maximum clamping force of this clamp? The Kukamet Vertikalspanner 212 provides a maximum clamping force of 750 N and a holding force rated at 1,000 N for stable part retention. How is the clamp mounted in a fixture? Mounting is via a vertical foot; the 44 mm arm and compact base suit tight fixture geometries where a low profile attachment is required. Is the mechanism secured against accidental release? Yes, the clamp features a safety lock and a massive holding arm to reduce the risk of unintended opening under vibration. What finish is applied to the clamp and what does it provide? The component is supplied with a blackened finish, offering surface protection and a robust appearance suitable for workshop use. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
750N Vertical Clamp 94mm Arm, Heavy-Duty Hold With Safety Lock, Zinc-Plated - Kukamet
Take advantage of a compact, corrosion-resistant clamping solution that combines a galvanised construction, a 94 mm massive holding arm and a positive safety lock for reliable, repeatable workholding. Order the Vertical Clamp directly via Metav Werkzeuge or contact our specialists for application advice. Vertical Clamp 211 — Kukamet with 94 mm heavy-duty arm and safety lock A robust vertical clamp designed for secure bench mounting and short-cycle workholding in metalworking and general workshop settings. Robust galvanised construction 94 mm massive holding arm Horizontal-foot mount for bench attachment Positive safety lock for secure clamping Built for reliable clamping and repetitive tasks The Vertical Clamp 211 delivers dependable clamping for frequent operations thanks to its massive holding arm and compact footprint. The galvanised finish provides basic corrosion resistance, reducing maintenance needs in everyday workshop environments. With a clear focus on mechanical reliability, the design supports steady results when used for short, repetitive clamping cycles, improving process consistency and reducing rework. Secure mounting and safe operation A horizontal foot base enables stable bench or fixture attachment, translating clamp force into secure part retention. The integrated safety lock prevents accidental release during handling and machining, supporting safe workflows. For process planners, the positive locking mechanism reduces the risk of workpiece displacement, which benefits quality control and decreases the probability of scrap. Compact and efficient for tight workspaces Weighing only 0.155 kg, this clamp provides a high strength-to-weight ratio that keeps workstations uncluttered. The combination of a 94 mm arm and compact dimensions allows versatile placement close to tooling or jigs, saving space without sacrificing performance. The restrained mass reduces inertia during handling, making the clamp suitable for fixtures where quick manual adjustments are required. Suitable applications and material handling Designed for general workshop use, the clamp’s galvanised steel construction and mechanics are appropriate for holding ferrous and non-ferrous components during assembly, inspection and light machining tasks. The mechanical ratings support use in fixtures where a 750 N pressing force and up to 1,000 N holding force are sufficient for stable part retention, making it a practical choice for small-batch production and prototyping. Contact Metav Werkzeuge for availability, technical clarification or tailored clamping recommendations for Kukamet products; call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: 211-1-D-L-C2 GTIN: 8680731509960 Model: 211 Manufacturer: Kukamet EClass: 21041717 ETIM: EC011973 Facts Arm length: 94 mm Weight: 0.155 kg Max pressing force: 750 N Max holding force: 1,000 N Special features Material: galvanised steel Mounting: horizontal foot Massive holding arm Safety lock Compact design FAQ What is the maximum holding force of the clamp? The Vertical Clamp 211 provides a maximum holding force of 1,000 N and a pressing force of 750 N for secure workholding. Which mounting method is required for installation? The clamp is designed for bench attachment using its horizontal foot for stable fixing to a workbench or fixture. What material is the clamp made from? The clamp features a galvanised steel construction that offers basic corrosion resistance for workshop environments. Is the clamp suitable for small-batch production and fixtures? Yes, the compact dimensions and robust arm make the device suitable for fixtures, prototyping and short production runs where reliable repetitive clamping is needed. How can I identify the exact item when ordering? Refer to the article number 211-1-D-L-C2 or GTIN 8680731509960 when specifying the Kukamet vertical clamp. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Secure components with reliable workpiece clamps
Workpiece clamps, also known as workholding clamps or workholding devices, form the essential mechanical interface between machine and part in industrial fabrication. They keep components absolutely play-free, positionally accurate and vibration-resistant during milling, turning, drilling or grinding.
How workpiece clamps ensure process stability
A correctly specified clamping concept transfers the high cutting and feed forces of modern CNC machines into the machine table or spindle without deforming the part. The right combination of mechanical, hydraulic, pneumatic or magnetic solutions enables fast, repeatable setups and supports automated part change where required. Typical applications range from single-part turning to high-volume series milling and complex five-axis machining.
Concrete production benefits at a glance
- repeatable positioning: reduces scrap and rework
- high clamping forces: withstands aggressive cutting without part movement
- reduced set-up time: modular systems and quick-change features speed throughput
- improved surface finish: vibration damping for finer results and tighter tolerances
- flexible compatibility: vices, chucks, clamping plates and zero-point systems for diverse geometries
Why Metav's range is the practical choice
Metav combines decades of specialist know-how with a broad, handpicked range that democratises precision for workshops and industry alike. Based in Emmerich, Metav acts as a quality filter for the European market and supplies more than 250,000 products from precision metrology to complete workshop equipment. With the trust of over 48,000 customers, Metav offers a single-source approach that reduces supplier complexity and secures dependable delivery to your workbench.
Technical data
- function: mechanical interface between machine and workpiece
- primary requirements: absolute positional accuracy; vibration reduction; high clamping forces
- technologies: mechanical, hydraulic, pneumatic, magnetic
- typical components: machine vices; chucks; clamping plates; zero-point systems; pratzen; clamping jaws
- application areas: milling; turning; drilling; grinding; automated part change systems
- production benefits: reduced set-up time; enhanced process security; optimised series and single-part production
The practical summary
Workpiece clamps bring the stability and repeatability required to meet tight tolerances and excellent surface quality, making them indispensable across machining operations. Choosing the right workholding clamps and modular workholding devices is a decisive step towards higher productivity and consistent part quality.
FAQ
What types of workpiece clamps are suitable for automated machining?
Workholding clamps with quick-change modules, hydraulic actuation or magnetic systems are commonly used for automated machining. These workholding devices enable fast, repeatable part changes and integrate with zero-point systems.
How do workpiece clamps affect surface finish and tolerances?
A stable clamping concept minimises vibration and part movement; this improves surface finish and supports achieving narrow tolerances when using high-precision workpiece clamps or workholding devices.
Can the same workpiece clamps handle different part geometries?
Modular workholding clamps and adaptable clamping jaws allow flexible fixturing for varied geometries; combining vices, clamping plates and pratzen increases versatility on the shopfloor.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com