Secure and precise workholding for metalworking productivity
Workholding devices such as workpiece clamps and chuck systems provide absolute positional stability and vibration damping during milling, turning, drilling and grinding, ensuring parts remain free of play under high CNC cutting and feed forces. By transferring clamping loads into the machine table or spindle without deforming the component, a well engineered workholding solution improves machining accuracy, surface finish and process reliability while reducing set-up times. Modular systems from machine vices and chucks to zero-point systems and specialised fixtures enable fast changeovers and support both serial and single-part production, delivering consistent clamping force, repeatability and enhanced throughput.
100mm Clamping Screw M16x2 Threaded Hardened Steel - Vertex
Benefit from the combination of a heat-treated steel body, a standard M16 x 2 pitch thread and a 100 mm length for reliable, repeatable clamping in production environments. Order the clamping screw directly via Metav Werkzeuge or consult our advisers for specification support and availability. Clamping Screws – M16 x 2 pitch, 100 mm, heat-treated steel by Vertex The clamping screw is a robust fastening component for secure workholding in industrial clamping and fixture applications Heat-treated steel construction Standard M16 x 2 thread 100 mm length for deep engagement SKU 1354M, GTIN 4061905094446 Stable, repeatable force for production setups The combination of a heat-treated steel shank and a metric M16 x 2 pitch thread provides a stable mechanical interface that supports consistent clamping force across repeated cycles. Heat treatment increases hardness and fatigue resistance, which reduces thread wear and helps maintain clamp preload over time. For production lines and repetitive jig operations, these properties translate into fewer adjustments, reduced downtime and improved component interchangeability, supporting higher first-pass yields and predictable process performance. Designed for workshop reliability and supply continuity Produced by Vertex, this screw is sized at 100 mm overall length to reach deeper clamping positions without compromising thread engagement. The durable material treatment extends service intervals and lowers total cost of ownership by reducing replacement frequency. Supplied through Metav Werkzeuge’s European distribution, stock reliability and consistent quality control mean faster replenishment and a dependable parts flow that supports uninterrupted workshop operations. Simple selection and broad compatibility with standard fixtures The M16 x 2 metric profile ensures compatibility with common nuts, couplings and clamping elements, simplifying integration into modular tooling and retrofit projects. The component is intended for general industrial clamping and workholding; final selection should consider the assembly’s load paths and the intended clamping force since specific safe working loads depend on the overall fixture design. The standard thread and length make this screw a versatile choice for jigs, fixtures and bespoke assemblies where metric interfaces are preferred. For dependable clamping hardware from Vertex, contact Metav Werkzeuge for availability of SKU 1354M and fast supply from our Emmerich stock (info@metav-werkzeuge.com) Technical Data SKU: 1354M GTIN: 4061905094446 Manufacturer: Vertex Core specifications Length: 100 mm Weight: 0.13 kg Thread: M16 x 2 pitch Design & compatibility Heat-treated steel Intended for clamping and workholding Standard metric thread for common fixtures FAQ What material is the screw made from? The clamping screw is manufactured from heat-treated steel, which enhances hardness and wear resistance for longer service life. What are the thread and dimensional details? The part uses a metric M16 x 2 thread and measures 100 mm in overall length; it is listed under SKU 1354M and GTIN 4061905094446. Is this component suitable for repeatable production clamping? Yes. The heat treatment and standard metric thread make it suitable for repetitive clamping operations where repeatability and reduced wear are required; final system loads depend on the full fixture assembly. Can this screw be used with standard nuts and clamping elements? The M16 x 2 profile is compatible with common metric nuts and clamping accessories, facilitating simple integration into existing fixtures. Where is this product supplied from and who manufactures it? The part is manufactured by Vertex and is distributed through Metav Werkzeuge’s European supply channels for workshop and industrial customers. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
100mm Clamping Screw M20x2.5P Heat-Treated Steel - Vertex
Taking advantage of a robust heat-treated steel construction combined with a standard M20 x 2.5 metric thread and a 100 mm overall length ensures dependable clamping and long service life; order directly via Metav Werkzeuge or contact our advisors for specification support. Clamping screw 1374M (M20 x 2.5, 100 mm) by Vertex Clamping screw 1374M is a heat-treated steel clamping fastener designed for secure fixture and jig applications in workshop and industrial environments. Heat-treated steel construction M20 x 2.5 metric thread 100 mm overall length SKU 1374M, GTIN 4061905094477 Secure, repeatable clamping for precision fixtures The fastener provides reliable clamping through a standard M20 x 2.5 metric thread, ensuring compatibility with common tapped holes and clamping elements used in machine fixtures and jigs. The metric pitch is optimised for a balance between engagement and adjustment speed, giving consistent axial movement per turn for precise positioning. By using a component with defined thread geometry and tolerance, set-up times are reduced and repeatability in assembly processes is improved, supporting efficient production workflows. Built for durability and low maintenance Manufactured from heat-treated steel, the component is hardened to deliver improved wear resistance and fatigue strength compared with untreated fasteners. This treatment increases the service life of the clamping element under cyclic loads typical in industrial use, which reduces replacement frequency and contributes to lower lifetime maintenance. With a compact mass of 0.2 kg, the part offers substantial mechanical robustness without adding unnecessary bulk to assemblies, aiding ergonomic handling during tooling changes. Traceable supply and straightforward integration The part is supplied under SKU 1374M and marked by GTIN 4061905094477, supporting inventory control and traceability for quality management systems. As a Vertex product, the component integrates easily into metric-based assemblies and replaces like-for-like parts when standard metric threads are specified. Clear identification and standard dimensions simplify procurement and stock management, enabling planners to maintain continuity of supply and reduce machine downtime through predictable sourcing. For procurement or specification advice on Vertex clamping components such as the 1374M, contact Metav Werkzeuge in Emmerich for rapid supply and technical guidance via info@metav-werkzeuge.com or call +49 2822 7131930. Technical Data Article number: 1374M GTIN: 4061905094477 Manufacturer: Vertex Core specifications Length: 100 mm Weight: 0.2 kg Thread: M20 x 2.5 Materials & features Material: Heat-treated steel SKU: 1374M FAQ What thread and pitch does the clamping screw use? The clamping screw 1374M is supplied with a M20 x 2.5 metric thread, suitable for standard M20 tapped holes. Which material is the fastener made from and what is the benefit? The component is made from heat-treated steel; the heat treatment increases hardness and wear resistance, improving longevity under repetitive clamping loads. How long is the clamping screw and how heavy is it? The overall length of the clamping screw is 100 mm and the mass is 0.2 kg, allowing robust performance with compact dimensions. Can the part be identified for inventory and reordering? Yes, the item is listed under SKU 1374M and GTIN 4061905094477, supporting clear traceability and reordering. Is this component suitable for general fixture applications? The clamping screw is designed for workshop and industrial fixture use where a M20 x 2.5 threaded clamping element is required and a heat-treated steel fastener is preferred for durability. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
100mm Clamping Screw M24x3P Heat-Treated Steel, 0.25kg - Vertex
Robust heat-treated steel construction and a M24 × 3 mm precision thread deliver dependable clamping force and long service life; the compact mass and 100 mm length support deep, stable fixture engagement. Order the clamping screw directly via Metav Werkzeuge or consult the Metav advisors for integration advice. Clamping Screw 1384M — M24 × 3 mm thread, 100 mm length (Vertex) The Clamping Screw 1384M is a heavy-duty clamping fastener designed for workshop fixtures and industrial jigs, combining a precision thread with heat-treated steel for consistent holding power in repetitive operations. Heat-treated steel for high durability M24x3P precision thread 100 mm overall length for deep clamping Compact mass approx. 0.25 kg Reliable clamping where it matters The component is manufactured from heat-treated steel, which increases hardness and resistance to fatigue; this results in a fastener that sustains repeated tightening cycles without premature deformation. The screw’s mass of approx. 0.25 kg contributes to a stable feel during installation and helps maintain contact pressure in large clamping assemblies. Such mechanical consistency reduces the need for frequent retorquing and supports uninterrupted production runs, delivering measurable reliability for fixture setups. Precision thread for repeatable positioning Equipped with an M24 × 3 mm metric thread, the fastener provides a coarse, robust engagement that is straightforward to machine-mate with standard fixture components. The thread pitch facilitates rapid axial movement per turn while keeping backlash low compared with larger-pitch alternatives, making it suitable where predictable axial travel and firm seating are required. Where alignment and repeatability are priorities, the screw’s thread geometry supports consistent clamping torque transfer and reduces setup variability. Built for workshop endurance and simple integration The product’s overall length of 100 mm allows access into deeper clamp pockets and long-reach fixtures without the need for extensions. Fabricated to industrial tolerances and finished for general workshop use, the component integrates with existing clamping systems and fixturing plates, enabling straightforward replacement or retrofit. As a Vertex-manufactured item, the part benefits from established production controls and traceability that match professional workshop expectations for quality and repeatability. For secure fixture performance and reliable delivery, order the Vertex Clamping Screw 1384M via Metav Werkzeuge — Metav’s specialists in Emmerich can advise on compatibility and supply for industrial applications Technical Data SKU: 1384M GTIN: 4061905089404 Manufacturer: Vertex Specifications Length: 100 mm Weight: 0.25 kg Thread: M24 × 3 mm Materials and features Material: heat-treated steel ECLASS: 21022190 Designation: clamping screw FAQ What thread specification does this clamping screw use? The clamping screw uses an M24 × 3 mm thread, which is specified for robust fixture engagement and predictable axial travel. Is the fastener suitable for deep clamping applications? Yes, the 100 mm overall length of the Clamping Screw 1384M is intended to reach into deeper fixture arrangements and long-reach clamping setups. How durable is the material of this component? Manufactured from heat-treated steel, the Clamping Screw 1384M is designed to withstand repeated tightening cycles and provide extended service life in workshop conditions. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
100mm Clamping Screw M8×1.25 Thread, Heat-Treated Steel - Vertex
Combining heat-treated steel durability with a precise M8 x 1.25 thread and a compact 100 mm length delivers secure, repeatable clamping for jigs and fixtures; order directly via Metav Werkzeuge or consult our specialists for application advice. Vertex clamping screw 1324M — M8 x 1.25 thread, heat-treated steel A Vertex clamping screw 1324M engineered for reliable workpiece fixation in jigs, fixtures and general workshop clamping applications. Heat-treated steel for high durability Precise M8x1.25 thread for reliable engagement 100 mm length for deep clamping reach Lightweight at 30 g for easy handling Built for repeatable, low-maintenance clamping The construction in heat-treated steel provides elevated wear resistance and consistent mechanical behaviour, reducing the need for frequent replacements or adjustments. This robustness translates into fewer production interruptions and lower maintenance overheads, supporting a predictable workflow. The combination of durable material and compact design is aimed at improving process reliability in medium-duty clamping tasks, where consistent contact pressure and repeatability are decisive for part quality. Precise thread and compact dimensions for straightforward integration The M8 x 1.25 metric thread delivers fine engagement that supports controlled axial movement and secure fixation in threaded receivers. With a 100 mm overall length and a mass of approximately 30 g, the fastener is easy to manoeuvre while providing sufficient reach for deeper clamp points. The finer 1.25 mm pitch aids incremental adjustment and reduces the risk of loosening under vibration compared with coarser threads, making the component suitable for assembly jigs and fixture plates requiring precise positioning. Versatility across workshop fixtures and small assemblies Designed as a general-purpose clamping element, this fastener serves in a wide range of workshop scenarios from simple bench jigs to dedicated fixture plates. The compact form factor and material choice ensure compatibility with common steel and aluminium fixtures without adding unnecessary bulk. Where environmental exposure is limited and high-strength alloys are not required, this solution balances performance and handling—facilitating quicker set-ups and fewer tool changes while maintaining secure workpiece support. Contact Metav Werkzeuge for application guidance or to request the Vertex clamping screw 1324M through our Emmerich quality filter — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 1324M GTIN: 4061905090233 Manufacturer: Vertex Core technical data Length: 100 mm Weight: 0.03 kg Thread: M8 x 1.25 Special features Material: Heat-treated steel ECLASS: 21022190 SKU: 1324M FAQ What thread specification does the clamping screw use? The clamping screw is supplied with an M8 x 1.25 metric thread, ensuring fine-pitch engagement suitable for fixtures and jigs. Is the fastener suitable for heavy-duty clamping applications? The Vertex clamping screw 1324M is made from heat-treated steel and is intended for medium-duty workshop and fixture use; for high-load industrial clamping, consider dedicated high-strength alternatives. What is the overall length and how much does it weigh? The fastener measures 100 mm in length and weighs approximately 0.03 kg, offering a balance between reach and easy handling. Can the clamping screw be used with aluminium fixture plates? Yes, the component is compatible with common fixture materials such as aluminium and steel when used within the intended medium-duty application range. Is this part supplied by a recognised manufacturer? The product is manufactured by Vertex and listed under SKU 1324M, reflecting established production standards for workshop fasteners. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
100mm Clamping Wedge T-Slot 12/14/16mm For M12 M14 DIN 6314 - AMF
Take advantage of a universal T‑slot fit, proven conformity to DIN 6314 and a compact 100 mm length that together deliver reliable fixture control and fast set‑ups — order directly via Metav Werkzeuge or consult our specialists for tailored advice. T‑slot clamping bar DIN 6314 (T‑nut 12/14/16) – 100 mm, AMF T‑slot clamping bar DIN 6314 (T‑nut 12 + 14 + 16) for secure fixturing in machine tables and modular clamping systems. Universal fit for T‑nut 12 + 14 + 16 Durable 100 mm length for secure clamping Works with M12 and M14 threads Conforms to DIN 6314 standard Consistent clamping performance for production workflows The T‑slot design, specified to DIN 6314, provides a standardised interface that simplifies fixture planning and reduces compatibility checks across machines. By using a component with a universal fit to common T‑nut sizes, production planners benefit from fewer variant parts and faster machine changeovers. The standard conformity also supports predictable mechanical behaviour under load, which helps maintain component tolerances and reduces rework rates. This rational performance argument ensures predictable throughput and supports long‑term process reliability. Thread compatibility that shortens set‑up time Designed to accept common metric threads, the clamping bar works with M12 and M14 fixing hardware, enabling straightforward integration into existing clamping assemblies. The clear specification of compatible threads reduces selection errors during procurement and assembly, translating into faster set‑ups and lower downtime. Where fixture repeatability matters, the defined thread compatibility supports consistent torque application and secure clamping, reducing slippage and the need for frequent retorquing. Compact length for accurate positioning and space‑efficient fixtures With a 100 mm total length, this clamping element offers a compact footprint that assists in dense fixture layouts and precise positioning of workpieces. The shorter profile allows for closer proximity to cutting zones when space constraints demand it, while still delivering the clamping force required for stable machining. For workshops that balance flexibility with precision, the compact design enables versatile fixturing without sacrificing rigidity — a practical advantage for both prototypes and small‑batch production. Streamlined sourcing and dependable supply from Metav Choosing a standardised clamping component from a trusted supplier reduces procurement complexity. Metav’s position as a precision partner means access to a broad range of compatible fixturing products and expert advice when configuring a clamping concept. The combination of technical clarity and reliable distribution minimises lead times and supports continuous production. Confidence in supply and documentation contributes to better planning and fewer interruptions on the shop floor, reinforcing both operational and reputational reliability. Select this AMF T‑slot clamping bar for dependable fixturing and contact Metav Werkzeuge for purchasing support or technical consultation at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data SKU: 4000833003NW UID: 4000833003NW Label: Spanneisen DIN 6314 f.T‑Nut 12+14+16mm L.100mm AMF Norm: DIN 6314 Product type: Spanneisen (clamping bar) Brand: AMF Facts Width: 14 mm Total length: 100 mm T‑nut compatibility: 12 + 14 + 16 Packaging unit: 1 Special features Suitable for: M12, M14 Axite enrichment: Addition: A: 20; B2: 40; B3: 14; E1: 21; E2: 40 FAQ What T‑slot sizes does the clamping bar support? The clamping bar is compatible with T‑nut sizes 12, 14 and 16, ensuring flexible use across standard machine tables. Which thread sizes can be used with this clamping element? This clamping element is suitable for M12 and M14 fixings; selecting the matching thread avoids installation errors and maintains clamp integrity. Does the product comply with an industrial standard? Yes, the T‑slot clamping bar conforms to DIN 6314, providing a recognised standard for T‑slot fixturing components. Is the 100 mm length suitable for tight fixture arrangements? The 100 mm total length offers a compact solution for space‑constrained setups while preserving the clamping stability required for precision machining. What information is given by the axite enrichment values? The axite enrichment entries describe the specified additional parameters for this clamping bar used in detailed fixture planning and inventory classification. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
100mm Combination Milling Arbor With 22mm Clamping Shank, DIN 69871 Form AD/B - TECWERK
Take advantage of the steep taper DIN 69871 Form AD/B and the 22 mm clamping diameter for secure, repeatable cutter retention; the SK40 shank and the case-hardened, ground finish ensure long service life and stable machining. Order the TECWERK combination mounting arbor directly via Metav Werkzeuge or consult our technical advisors for application guidance. Kombiaufsteckfräsdorn DIN 69871 AD/B – SK40, 22 mm clamping diameter (TECWERK) The Kombiaufsteckfräsdorn DIN 69871AD/B is a combination mounting arbor designed for secure attachment of milling cutters with longitudinal or transverse keyways in conventional and CNC milling spindles Steep taper DIN 69871 Form AD/B Accepts cutters with longitudinal or transverse key Case-hardened and ground finish SK40 shank with 22 mm clamping diameter Consistent clamping for repeatable machining results The combination mounting arbor is built around the DIN 69871 Form AD/B steep taper, which provides a rigid connection between spindle and toolholder. This taper design reduces runout and vibration, delivering consistent concentricity across repeated tool changes. By combining a SK40 shank with a defined 22 mm clamping diameter, the arbor guarantees stable radial support for mounted cutters, improving surface finish and extending tool life. For production environments where repeatability matters, this configuration translates into predictable process outputs. Versatility for keyed milling cutters and modular setups Designed to accept milling cutters with either a longitudinal or transverse key, the arbor permits flexibility in cutter selection and tool arrangement. The keyway compatibility simplifies retrofitting of existing cutter sets and supports modular tooling concepts in both jobbing shops and production cells. Where quick adaptation between operations is required, the ability to mount a range of keyed cutters on a single holder minimises setup complexity while maintaining the required axial and radial restraint for safe machining. Durability through hardened and precision-ground surfaces Critical load-bearing zones of the arbor are case-hardened and ground, which enhances wear resistance and maintains geometric accuracy under cyclic loads. The hardened surface resists fretting and local deformation at the clamping interface, while precision grinding ensures that mating surfaces seat correctly within the spindle taper. The result is a toolholder that retains its dimensional integrity over extended service intervals, reducing the need for frequent replacements and preserving machining tolerances. Integration into workshop toolchains and maintenance benefits With a nominal projection of A = 100 mm and a compact overall profile, the arbor fits common SK40 toolholder systems without requiring major toolroom changes. The construction supports straightforward inspection and maintenance: periodic checks of taper faces and clamping bore are sufficient to identify wear, and the robust finish reduces the incidence of corrosion-related issues. For workshops aiming to centralise tooling needs, the arbor's compatibility and serviceability contribute to a lower total cost of ownership and simpler inventory management. For secure, workshop-ready clamping from TECWERK, request technical advice or place enquiries through Metav Werkzeuge for tailored application support and availability Technical data Article number: 2000833798NW Product type: Combination mounting arbor Brand: TECWERK Standard: DIN 69871 Form AD/B Core data Shank diameter: 40 mm Clamping diameter: 22 mm Projection A: 100 mm L: 19 mm Special features Steep taper DIN 69871 Form AD/B For milling cutters with longitudinal or transverse key Case-hardened and ground SK40 shank FAQ What materials of cutters can be mounted on this arbor? The TECWERK combination mounting arbor accepts milling cutters with longitudinal or transverse keyways; material compatibility depends on the cutter specification rather than the arbor itself, which provides the mechanical interface for keyed cutters (SKU: 2000833798NW). How does the DIN 69871 Form AD/B taper affect runout? The DIN 69871 Form AD/B steep taper ensures a tight, concentric engagement with the spindle taper, reducing runout and vibration compared with less precise interfaces, which supports improved surface finish and tool life when using the TECWERK arbor. Is the clamping diameter a fixed value and what does 22 mm mean in practice? The 22 mm clamping diameter indicates the bore size used to secure the cutter on the arbor; this fixed dimension matches cutters and adaptors designed for a 22 mm fit, ensuring proper radial support and axial retention. What maintenance is recommended to keep performance stable? Periodic inspection of taper faces and the clamping bore for wear, light cleaning of contact surfaces, and protection against corrosion are recommended to preserve the arbor’s accuracy and service life; the case-hardened and ground finish of the TECWERK arbor reduces wear rates. Can the arbor be used in both manual milling machines and CNC centres? Yes, the SK40 shank and the DIN 69871 taper are standardised interfaces that enable use in both conventional milling spindles and CNC machines equipped for SK40 tooling, provided the machine spindle accepts DIN 69871 toolholders. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
100mm Face Clamping Chuck Weldon Shank Ø14mm, DIN 69871 Form AD - TECWERK
Secure machining performance with a robust SK40 taper and precise 14 mm clamping diameter that support consistent tool retention and stable milling cycles. Order the holder directly via Metav Werkzeuge or consult our specialists for compatibility and application advice. Weldon end mill holder SK40 (DIN 69871 Form AD) – 14 mm clamping diameter, 100 mm projection | TECWERK The Weldon end mill holder SK40 (DIN 69871 Form AD) is a tool-holder solution for secure clamping of cylindrical-shank cutters with a lateral drive flat, designed for integration in milling spindles and machining centres. DIN 69871 Form AD taper SK40 steep taper compatibility 14 mm clamping diameter H4 100 mm projection length Secure clamping that reduces setup variability The holder delivers consistent tool retention through a steep taper to DIN 69871 Form AD combined with a dedicated Weldon flat, ensuring axial and radial security for tools with a cylindrical shank. The combination of taper fit and lateral drive means the tool is held by both taper contact and the side drive, which reduces micro-movement under cutting loads and supports repeatable set-ups. Such mechanical reliability translates into fewer interruptions on the shopfloor and a higher effective uptime for production runs. Clear machine compatibility and straightforward integration Built to accept cutters with a side drive per DIN 1835-B, the holder adapts easily to machines equipped with the corresponding spindle taper. The SK40 specification and the dimensional data—100 mm projection and 44 mm body diameter—allow planners to check reach and clearance quickly. The internal bore is manufactured to H4 tolerance for the clamping seat, supporting accurate concentricity for a 14 mm clamping diameter; this precision assists in maintaining acceptable runout and extending tool life when used with appropriately matched tooling and spindle conditions. Practical benefits for workshop efficiency and handling Handling and inspection are made straightforward thanks to the familiar Weldon-style configuration, which simplifies tool changes and visual verification of the lateral drive. The holder’s geometry enables reliable torque transmission without reliance on adhesive measures, supporting safer, predictable machining processes. As a component from TECWERK, it integrates industry-standard dimensions and mounting practice, making it suitable for manufacturers and toolrooms seeking a durable, standards-compliant tool-holding option that eases logistics and reduces the need for special adapters. Contact Metav Werkzeuge to confirm machine compatibility for this TECWERK Weldon end mill holder; call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: 2000833730NW Designation: Weldon end mill holder SK40 (DIN 69871 Form AD) Manufacturer: TECWERK Core dimensions Projection length A: 100 mm Outside diameter D: 44 mm Clamping diameter: 14 mm Bore tolerance: H4 Special features Weldon flat for lateral drive per DIN 1835-B Steep taper to DIN 69871 Form AD Suitable for cylindrical-shank tools SK40 tool taper FAQ Is the holder compatible with SK40 spindles? Yes. The TECWERK Weldon end mill holder is manufactured to DIN 69871 Form AD and is compatible with SK40 spindles designed for that standard. What is the clamping diameter and tolerance? The clamping diameter is 14 mm with a bore tolerance of H4, ensuring a precise fit for cylindrical-shank cutters within that nominal size. Which shank types does the holder accept? The holder accepts cylindrical shanks with a lateral drive flat according to DIN 1835-B; this Weldon-style arrangement secures torque transmission during milling. What are the key dimensions to check for machine integration? Check the projection length of 100 mm and the body diameter of 44 mm to ensure sufficient reach and clearance when installing the holder in a spindle. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
100mm Face Clamping Chuck Weldon Shank Ø32mm, DIN 69871 Form AD - TECWERK
Take advantage of a compact, standardised clamping solution that combines a Weldon positive-drive interface and DIN 69871 Form AD taper for reliable repeatability and fast tool changes; the 32 mm clamping diameter with H4 bore tolerance ensures precise seating and torque transmission. Order directly via Metav Werkzeuge or consult the Metav team for specification alignment. TECWERK face clamping chuck DIN 69871 Form AD — Weldon, 32 mm clamping, SK40, 100 mm projection A TECWERK face clamping chuck DIN 69871 Form AD designed to secure tools with cylindrical shanks and a lateral drive flat to DIN 1835-B in SK40 spindles for machining and milling applications. Weldon flat for positive drive DIN 69871 Form AD taper interface 32 mm clamping diameter with H4 tolerance SK40 shank with 100 mm projection Secure, standardised interface for consistent toolholding The face clamping chuck offers a standardised connection via DIN 69871 Form AD, providing a familiar SK40 interface for machine spindles. The integrated Weldon flat supplies positive axial and rotational drive to tools with lateral drive flats, reducing slip under load and improving process stability. The 32 mm clamping diameter is held to an H4 bore tolerance, which means the fit is tight and predictable; this tolerance class ensures minimal radial play and repeatable concentricity between successive tool changes, directly supporting tighter machining tolerances. Robust transmission and suitability for driven tools Designed for driven tools with a cylindrical shank and lateral drive flat to DIN 1835-B, the holder translates spindle torque reliably through the Weldon contact while maintaining axial security. The external dimensions (outer diameter 72 mm, projection 100 mm) balance rigidity and accessibility in the tool zone, allowing secure clamping without excessive overhang. This configuration suits milling and light to medium-duty operations where dependable power transfer and quick changeover are priorities, and it simplifies retrofit into existing SK40 toolholding systems. Practical workshop benefits: integration and uptime The compact geometry and adherence to recognised standards make the chuck straightforward to stock and interchange across machines that accept DIN 69871 tapers. Fewer special adapters are required, which shortens setup times and reduces toolholder inventory complexity. The combination of Weldon positive-drive and an H4-tolerance bore helps to lower scrap rates by improving concentricity and repeatability. For workshops seeking cost-effective, standardised clamping, this solution supports consistent process output with minimal additional adjustments. Discuss suitability with Metav Werkzeuge today — our specialists in Emmerich can confirm compatibility with existing SK40 toolholding systems and arrange supply directly from stock Technical data Article number: 2000833747NW Manufacturer: TECWERK Product type: Face clamping chuck Label: Face clamping chuck DIN 69871AD Weldon clamping Ø 32 mm SK40 A-L 100 mm Facts Clamping diameter: 32 mm Outer diameter: 72 mm Projection length A: 100 mm Bore tolerance: H4 Interface: DIN 69871 Form AD Special features Weldon flat for positive drive per DIN 1835-B SK40 taper shank Accepts cylindrical shank tools with lateral drive flat H4 tolerance for precision seating FAQ What spindle interface does this chuck use? The chuck connects via a DIN 69871 Form AD taper and is supplied with an SK40 shank for compatibility with machines that accept that interface. How does the Weldon flat improve performance? The Weldon flat provides a positive drive that transmits torque directly through the lateral drive contact, reducing slippage and improving rotational security for tools with a matching drive flat. What does the H4 tolerance imply for clamping accuracy? An H4 bore tolerance specifies a precise inner diameter that yields tight, repeatable seating of the clamped tool, contributing to improved concentricity and consistent machining results. Is this chuck suitable for driven milling cutters? Yes, the design accepts tools with a cylindrical shank and lateral drive flat to DIN 1835-B, making it suitable for driven milling cutters where positive torque transmission is required. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund
100mm Face Clamping Chuck Weldon Shank Ø8mm H4 Bore, DIN 69871 Form AD - TECWERK
Benefit from secure, repeatable tool holding using the Weldon lateral drive together with a DIN 69871 Form AD taper; the 8 mm clamping diameter and 100 mm length deliver practical compatibility and reach. Order the clamping holder directly via Metav Werkzeuge or ask our consultants if needed. TECWERK Weldon face clamping holder — SK40, 8 mm clamping Ø, 100 mm length A Weldon face clamping holder in DIN 69871 Form AD for secure mounting of cylindrical-shank tools with a lateral drive surface to DIN 1835-B, designed for use in SK40-equipped milling spindles Weldon lateral drive for secure tool transmission Compatible with DIN 69871 Form AD (SK40) 8 mm clamping diameter for cylindrical shanks 100 mm overall length for deeper reach Precision clamping for consistent machining results The TECWERK Weldon face clamping holder combines a steep taper and lateral drive to ensure dependable torque transfer and low runout. The DIN 69871 taper in Form AD provides a well-established interface for mounting in SK40 spindles, while the Weldon flat secures tools with a side drive feature. This arrangement reduces vibration and improves repeatability during high-precision milling and finishing operations, translating technical reliability into predictable production output. Built for accurate alignment and practical reach Manufactured to tight tolerances, the holder features a bore tolerance H4 that supports concentricity and stable clamping of cylindrical shanks. With an overall length of 100 mm and an outer diameter of 28 mm, the design balances accessibility and rigidity for tools that require extra reach without compromising stability. The clearly defined 8 mm clamping diameter simplifies tool selection and helps reduce changeover time through consistent seating and clamping behaviour. Straightforward compatibility with standard tooling systems This clamping arbor accepts tools with a cylindrical shank and lateral drive surface to DIN 1835-B, making it suitable for widely used tool geometries in workshop and industrial milling environments. Compatibility with SK40 interfaces ensures easy integration into existing machines, while the Weldon drive provides a positive, slip-resistant connection. The result is a component that supports efficient setup, reliable tool retention and the confidence to maintain steady production rhythms. Contact Metav Werkzeuge for technical confirmation and to secure the TECWERK Weldon face clamping holder for reliable tool retention and reduced setup times. Technical data Article number: 2000833721NW Norm: DIN 69871 Form AD Product type: Face clamping holder Manufacturer: TECWERK Dimensions & core data Clamping diameter: 8 mm Shank diameter (D): 28 mm Length A: 100 mm Bore tolerance: H4 Special features Weldon lateral drive (flat for side drive) For tools with cylindrical shank and lateral drive surface to DIN 1835-B Compatible with SK40 spindles Steep taper Form AD FAQ What taper standard does this holder use? The holder uses the DIN 69871 Form AD taper; see SKU 2000833721NW for the TECWERK face clamping holder details. Which tool shanks are supported? Tools with a cylindrical shank and a lateral drive surface to DIN 1835-B are supported by this Weldon clamping system. What is the clamping diameter and overall length? The clamping diameter is 8 mm and the overall length is 100 mm, suitable for tools needing extra reach. Is the holder compatible with SK40 spindles? Yes — the design conforms to SK40 interfaces for straightforward integration into standard milling spindles. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
100mm Flächenspannfutter Weldon Steilkegel DIN 69871 Form AD Spann-Ø 10mm SK40 - TECWERK
Flächenspannfutter DIN 69871AD Weldon Spann-D.10mm SK40 A.-L.100mm TECWERK Das Flächenspannfutter DIN 69871AD Weldon Spann-D.10mm SK40 A.-L.100mm TECWERK ist ein präzises Spannmittel zur Aufnahme von Werkzeugen mit Zylinderschaft und seitlicher Mitnahmefläche nach DIN 1835-B für Fräsmaschinen und Bearbeitungszentren Steilkegel nach DIN 69871 Form AD Weldon-Aufnahme für seitliche Mitnahmefläche Spann-Ø 10 mm für Zylinderschaftwerkzeuge Schaftausführung SK40 mit 100 mm Länge Bohrungstoleranz H4 für präzise Passung Hohe Prozesssicherheit durch genormte Spannaufnahme Das Flächenspannfutter gewährleistet konstante Präzision und stabile Kraftübertragung dank Steilkegel nach DIN 69871. Die Kombination aus genormter Schaftaufnahme und Weldon-Mitnahmefläche minimiert Werkzeugspiel und erhöht die Wiederholgenauigkeit bei Serienläufen. Durch die enge Bohrungstoleranz H4 bleibt die Passung dauerhaft stabil, was Ausschuss reduziert und Rüstzeiten verkürzt. Kompatibilität und Anwendungsvorteile in der Zerspanung Mit der SK40-Schaftaufnahme ist das Spannfutter universell mit vielen Frässpindeln kompatibel und eignet sich besonders für Werkzeuge mit Zylinderschaft nach DIN 1835-B. Die Spann-Ø 10 mm bietet sichere Aufnahme kleinerer Fräser und Bohrer, während die 100 mm Ausführung bei tiefen Werkzeugen oder verlängerten Aufnahmen für gute Balance sorgt. Dies führt zu zuverlässigen Bearbeitungsergebnissen und weniger Nacharbeit. Montage, Normenverständnis und praktische Hinweise Die Montage erfolgt wie bei allen Form-AD-Aufnahmen über die Schaftkupplung der Maschine; dabei ist auf korrekte Reinigung und leichte Schmierung der Passflächen zu achten, um die Präzision dauerhaft zu erhalten. Die Normen DIN 69871 und DIN 1835-B regeln Form und Mitnahmeflächen; wer mit diesen Begriffen wenig vertraut ist, profitiert von der standardisierten Austauschbarkeit und der einfachen Ersatzteilbeschaffung. Für sichere und wiederholbare Spannvorgänge empfiehlt sich das Flächenspannfutter von TECWERK — Bestellung und technische Beratung über Metav Werkzeuge; Fragen per eMail an info@metav-werkzeuge.com oder telefonisch unter +49 2822 7131930 Produktmerkmale Artikelnummer: 2000833724NW Marke: TECWERK Bezeichnung: Flächenspannfutter DIN 69871AD Weldon Spann-D.10mm SK40 A.-L.100mm Norm: DIN 69871 Form AD Produktart: Flächenspannfutter Daten A: 100 mm D: 35 mm Spann-Ø: 10 mm Verpackungseinheit: 1 Besonderheiten Steilkegel: Schaftnorm DIN 69871 Weldon: seitliche Mitnahmefläche für positive Drehmomentübertragung Aufnahme: Zylinderschaft nach DIN 1835-B Bohrungstoleranz: H4 (enge Passung) Spannaufnahme: SK40 (Frässpindel-Schaft) FAQ Wie wird das Spannfutter in die Spindel aufgenommen? Das Flächenspannfutter von TECWERK wird über die SK40-Schaft in die Maschinenspindel aufgenommen; die Form AD Ausführung sorgt für zentrische Lage und stabile Verbindung. Für welche Werkzeuge eignet sich das Flächenspannfutter? Das Flächenspannfutter DIN 69871 AD nimmt Werkzeuge mit Zylinderschaft und seitlicher Mitnahmefläche nach DIN 1835-B auf, insbesondere Fräser und Bohrer mit Spann-Ø 10 mm. Welche Bedeutung hat die Bohrungstoleranz H4? Die Bohrungstoleranz H4 gewährleistet eine enge, spielfreie Passung zwischen Werkzeugschaft und Spannfutterbohrung, was die Wiederholgenauigkeit und die Stabilität beim Zerspanen verbessert. Kann das Spannfutter für Serienfertigung eingesetzt werden? Ja, durch die genormte Ausführung und die Weldon-Mitnahmefläche ist das TECWERK Spannfutter für wiederholgenaue Serienprozesse und prozesssichere Werkzeugwechsel geeignet. Hersteller: NORDWEST Handel AG; Robert-Schuman-Straße 17; 44263 Dortmund
100mm Fork Clamp Bar Slot 11mm For M10 Clamp Screw DIN 6315B - AMF
Benefit from standard-compliant clamping and precise slot sizing: the DIN 6315B conformity combined with an 11 mm slot and M10 compatibility ensures secure, repeatable clamping in compact fixtures. Order the AMF fork clamping bar directly via Metav Werkzeuge or ask our consultants if needed. AMF fork clamping bar DIN 6315B — 11 mm slot, 100 mm length AMF fork clamping bar DIN 6315B is a fork-style clamping element designed for fixture applications where standardised dimensions and M10 screw compatibility are required. DIN 6315B standardised fork clamp 11 mm slot width for precise seating 100 mm overall length for compact fixtures Compatible with M10 clamping screws Reliable, standardised clamping for repeatable setups Compliance with DIN 6315B provides a defined reference for repeatable clamping operations, reducing setup variability on the shop floor. The standardised geometry simplifies interchangeability within modular fixture systems, so changes to jigs or workholding fixtures do not require bespoke adjustments. Emphasis on precision benefits production runs that demand consistent part location and repeatability. Space-saving fork design for flexible fixture layouts The fork configuration and 100 mm overall length make the component suitable for tight fixture envelopes and nested clamping arrangements. The compact form factor helps to optimise clamping density without sacrificing access for tightening tools. In practice, a shorter clamp length can shorten cycle times by easing operator handling and enabling closer workpiece placement on the table. Clear compatibility with M10 clamping systems A 11 mm slot width is sized to accept common clamping interfaces and to align accurately with M10 clamping screws. For planners and purchasers, this means straightforward integration into existing M10-based clamping meshes and minimal additional procurement of adaptors. The defined slot dimension also aids in achieving a secure seating that supports consistent clamping force transmission. Integrates smoothly into industrial workflows Designed for use in industrial workholding, the fork clamping element supports quick retrofitting into existing fixtures and modular tooling systems. The standardised dimensions reduce engineering time for new fixtures and lower the risk of assembly errors in the jig build phase. Reliability in fixture elements contributes directly to overall process efficiency and fewer stoppages during production. For secure, standard-compliant clamping choose the AMF fork clamping bar and contact Metav Werkzeuge for tailored advice and rapid supply from Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 4000833022NW Product type: Fork clamping bar Standard: DIN 6315B Brand: AMF Label: Gabelspanneisen DIN 6315B Schlitz-B.11mm L.100mm f.Spannschraube M10 AMF Facts Slot width: 11 mm Overall length: 100 mm Clamping screw size: M10 Pack unit: 1 Axite enrichment: A: 20; B2: 31; B3: 10; B4: 5 Special features Fork design (Gabelausführung) Standardised dimensions for modular fixtures Compatibility with M10 clamping systems FAQ What slot width does the fork clamping bar have? The fork clamping bar features an 11 mm slot width, suitable for precise seating in modular fixtures. Which clamping screw size is compatible with this item? Compatibility is specified for M10 clamping screws, enabling integration with common M10-based systems. Is this clamp manufactured to a recognised standard? Yes, the component conforms to DIN 6315B, ensuring consistent dimensions for repeatable setups. What is the overall length of the clamp? The overall length is 100 mm, designed for compact fixture arrangements and dense workholding layouts. Can the clamp be used in existing modular fixture systems? The DIN 6315B geometry and M10 compatibility allow straightforward integration into existing modular fixtures and jigs. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
100mm Four-Jaw Independent Lathe Chuck 2300r.p.m., 3.5kg - Vertex
Take advantage of the combination of independent jaw control, a 100 mm clamping diameter and a 2300 rpm rating to streamline small-batch turning operations; order the VKC-4 directly via Metav Werkzeuge or consult our specialists for integration advice. VKC-4 – independent four-jaw chuck, 100 mm diameter, 2300 rpm The VKC-4 independent four-jaw chuck is a compact clamping solution for versatile turning applications in workshops and small production lines, providing flexible gripping for irregular and standard workpieces. Independent jaw adjustment for asymmetric parts 100 mm clamping diameter for compact workpieces Rated for up to 2300 rpm operation Compact, low-inertia mass of 3.5 kg Accurate gripping for irregular shapes and precision turning The independent jaw mechanism delivers true flexibility: each jaw can be adjusted separately to centre off‑axis or irregular workpieces without additional fixtures. This design simplifies seating of non-cylindrical parts and reduces the number of secondary operations required. The independent jaws support controlled clamping forces while maintaining concentricity, which helps to shorten cycle times and improve machining outcomes for short runs and bespoke components. With a 100 mm clamping diameter, the unit suits smaller workpieces commonly encountered in toolrooms and craft workshops. Stable performance that speeds up set-up and repeatability A compact mass of 3.5 kg contributes to low rotational inertia, which assists quicker spin-up and stable running at the specified maximum of 2300 rpm. The chuck’s balance and construction promote consistent seating of parts, enhancing repeatability between set-ups. Fewer adjustments are required over successive parts, so throughput improves without sacrificing quality. These operational efficiencies translate directly into measurable time savings on the shop floor and a more predictable production rhythm. Designed for workshop integration and flexible production The VKC-4 is aimed at small to medium workshops and independent turners who need adaptable clamping without complex fixturing. The compact form factor allows easy handling and fast tool changes, making it well suited to short-series production, prototyping and repair work. By enabling quick reconfiguration for different part geometries, the chuck supports efficient job switching and reduces idle machine time. Emphasis on practical functionality ensures the component contributes to smoother workflows and better resource utilisation. Practical maintenance for long service life Routine inspection and basic maintenance preserve clamping accuracy and operational safety. Accessible jaw adjustment points and a straightforward layout make cleaning and occasional lubrication simple tasks for in‑house technicians. Regular checks for jaw wear and runout keep performance predictable and reduce the likelihood of unscheduled downtime. The design encourages a pragmatic maintenance routine that supports ongoing productivity and prolongs service intervals. Contact Metav Werkzeuge to discuss supply options and technical compatibility for the Vertex VKC-4 independent four-jaw chuck, or request tailored advice from our consultants at Metav Werkzeuge. Technical data Article number: VKC-4 GTIN: 4061905083822 EClass: 21020490 Manufacturer: Vertex Facts Clamping diameter: 100 mm Maximum speed: 2300 rpm Mass: 3.5 kg T-slot/thread detail: 4-M8 Special features Independent jaw adjustment Compact design for small workpieces Suitable for workshop and short-series use FAQ What workpieces are best suited to this chuck? The VKC-4 independent four-jaw chuck is particularly effective for irregular, square or otherwise non-cylindrical workpieces where separate jaw adjustment enables precise seating. Is 2300 rpm the safe operating limit for the chuck? Yes, the specified maximum operating speed of 2300 rpm defines the safe rotational limit for this Vertex VKC-4 chuck; adherence ensures reliable performance. How does the independent jaw setup improve workflow? Independent jaws allow individual positioning to centre asymmetrical parts quickly, reducing fixture time and improving process throughput with the VKC-4 chuck. What maintenance is recommended to retain accuracy? Periodic cleaning, inspection for jaw wear and light lubrication of moving parts will keep the VKC-4 chuck running accurately and help extend service life. Can the chuck be used for short-series production? The compact form and rapid reconfiguration capability make the VKC-4 well suited to short-series production and frequent job changes. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
100mm Height Adjustment Device Set, Standard - Vertex
Benefit from 0.005 mm accuracy, a 100 mm measuring range and a lightweight 1 kg design that together speed up setup and maintain production tolerances. Order the height setting device directly via Metav Werkzeuge or ask our consultants if needed. HP-100Z height setting device (Standard) — 100 mm, 0.005 mm accuracy by Vertex The HP-100Z is a compact height setting device set intended for workshop metrology and quick height adjustments on inspection benches and machine set-ups. High precision 0.005 mm 100 mm measuring range Lightweight 1 kg for portability Precision that keeps production within tolerance The core benefit is the device’s 0.005 mm accuracy, which enables repeatable adjustments when setting tool or part heights. In practice this level of precision reduces scrap and rework by ensuring that reference heights are established with minimal deviation. For users unfamiliar with technical metrology terms, accuracy here refers to the maximum permissible deviation from the true value; repeatability denotes the ability to return to the same reading under the same conditions. The combination of these characteristics supports tighter process control on the shop floor and contributes to consistent part quality. Compact form that speeds setup and handling A 100 mm measuring range in a compact design provides a practical balance between reach and convenience. The modest footprint makes the instrument simple to position on a surface plate or mounting bracket, and the 1 kg weight means it can be moved between workstations with ease. Reduced handling time translates directly into lower set-up cycles and faster throughput. Where mobility and quick deployment are priorities—for example during tool changes or sample checks—the device’s format helps maintain production flow without compromising measurement capability. Built for reliable routine use and simple integration As a standard device from Vertex, the unit is supplied as a set suitable for general height-setting tasks. Its straightforward operation reduces training time for operators, while its specification allows integration into common workshop procedures. The measuring range and accuracy make it suitable for pre-setting tools, routine inspection tasks and reference-height transfer. For shops seeking a dependable and low-complexity metrology tool, this height setter offers immediate practical advantages: less downtime, clearer process definition and predictable set-up behaviour. Contact Metav Werkzeuge today to discuss how the Vertex HP-100Z height setting device with 0.005 mm accuracy can streamline height setting and improve setup consistency on the shop floor Technical data Article number: HP-100Z GTIN: 4061905095665 Manufacturer: Vertex Product: Height setting device Data Accuracy: 0.005 mm Measuring range: 100 mm Weight: 1 kg ECLASS: 21170532 Special features Type: Standard Set: set Category: Vertex FAQ How precise is the height setting device? The HP-100Z from Vertex provides an accuracy of 0.005 mm, giving very fine control for setting reference heights and minimising variance in repeat measurements. What is the usable measuring range? The device offers a measuring range of 100 mm, suitable for most bench-top height-setting and tool pre-setting applications. Is the instrument easy to move between workstations? Yes. With a weight of 1 kg and a compact form factor, the HP-100Z is designed for straightforward portability around the workshop. What type of applications is this set intended for? The set is intended for general height-setting tasks, including tool pre-setting, reference transfers and routine inspection work in industrial and workshop environments. Who manufactures the product and what is the model designation? The instrument is manufactured by Vertex; the model designation is HP-100Z, a standard height setting device designed for reliable everyday use. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
100mm Height Setting Device With LED And Magnetic Base - Vertex
Take advantage of precise, repeatable height setting with a compact design and reliable magnetic mounting; the combination of 100 mm range, integrated LED indication and a stable magnetic base supports consistent set-ups and faster cycle times. Order the device directly via Metav Werkzeuge or ask the consultants for application advice. HP-100EM height setting device by Vertex — 100 mm, LED & magnetic base A HP-100EM height setting device designed for rapid, repeatable height adjustments in workshop metrology and assembly tasks. 100 mm measuring range Integrated LED for clear indication Magnetic base for secure mounting Lightweight at 1.25 kg for portability Efficient, repeatable height setting that speeds workflows The compact height gauge delivers precision where repeatability matters most. With a 100 mm measuring range and a design optimised for short set-up cycles, the device reduces the time spent on routine adjustments. The measured value is established quickly and consistently, which supports higher throughput on jigs, fixtures and assembly benches. This focused performance is particularly relevant for small-batch production and inspection stations where minimising handling time improves overall efficiency. Clear visual confirmation for safer, faster operation An integrated LED provides an immediate visual cue during alignment and height-setting tasks, cutting down the need for constant close inspection. Visual signalling helps operators verify correct positioning at a glance and reduces alignment errors, especially under variable workshop lighting. The illuminated indication is suitable for repetitive work and supports easier quality control during shift changes, contributing to fewer rework cycles and steadier production quality. Secure magnetic mounting for reliable reference points The magnetic base ensures a firm hold on ferrous surfaces and maintains the reference position during adjustment and measurement. This stable anchoring reduces slippage and the need for additional clamps, improving both safety and consistency. In situations where frequent repositioning is required, the magnetic mounting simplifies handling while preserving the repeatability expected in precision workshops. Compact build with convenient portability and robust handling Weighing just 1.25 kg, the instrument is light enough for mobile use across machines and workstations yet substantial enough to convey solid build quality. The compact footprint suits crowded benches and inspection tables, while the ergonomic form supports quick repositioning. Minimal maintenance and straightforward handling mean the device integrates with existing metrology workflows without introducing complexity. Contact Metav Werkzeuge for tailored advice and supply of the Vertex HP-100EM height setting device; email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss specifications and delivery from our Emmerich quality hub Technical data SKU: HP-100EM GTIN: 4061905088223 Measuring height: 100 mm Weight: 1.25 kg eClass: 21170532 Manufacturer: Vertex Facts Measuring range: 100 mm Weight: 1.25 kg eClass ID: 21170532 Special features Height setting device with integrated LED Magnetic base for secure mounting Compact, workshop-oriented design FAQ What measuring range does the device offer? The Vertex HP-100EM height setting device features a measuring range of 100 mm for routine height adjustments and short-range set-ups. Is the base suitable for magnetic mounting on machines? Yes, the instrument includes a magnetic base that secures the device to ferrous machine beds and fixtures to provide a stable reference. Does the device provide visual feedback during adjustment? The unit is fitted with an integrated LED that indicates alignment and positioning, making visual confirmation straightforward during work processes. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
100mm Height Setting Device With Magnetic Base Set, 0.005mm Resolution - Vertex
Combining industrial-grade 0.005 mm accuracy with a firm magnetic base and a compact 100 mm range, the HP-100ZM height-setting device speeds up machine setup and reduces adjustment errors for repeatable results. Order the height-setting device directly via Metav Werkzeuge or consult the Metav specialists for application guidance. HP-100ZM Height-setting device with magnetic base – 100 mm, 0.005 mm accuracy (Vertex) The HP-100ZM height-setting device is a compact instrument for precise tool-height adjustment and machine setup, designed with a magnetic foot to secure positioning on ferrous work surfaces for workshop and inspection tasks. Precise 0.005 mm repeatability Magnetic base for secure attachment 100 mm measuring range Lightweight: 1 kg for easy handling Faster, measurable setup through industrial accuracy High-precision measurement shortens setup cycles and reduces scrap. The instrument delivers a rated 0.005 mm of accuracy, which translates into consistently reproducible adjustments when aligning tools or setting reference heights. This level of precision supports quality control and minimises time spent on iterative checks, offering a clear productivity advantage in production and maintenance routines. The combination of tight tolerances and stable readings is particularly valuable where component interchangeability and machining repeatability are required. Secure positioning that reduces process variability A robust magnetic base provides steady fixation to ferrous tables and machine beds, cutting down on slippage during measurement and adjustment. By holding the gauge reliably in place, the magnetic foot improves the reliability of each height transfer and lowers the risk of rework caused by movement or inaccurate reference points. This practical feature is well suited to busy workshop environments where secure, repeatable contact is essential for consistent results. Compact construction for agile workshop use With a 100 mm measuring range in a compact housing and a weight of only 1 kg, the instrument is easy to handle and transport between machines or inspection stations. The modest footprint simplifies storage and allows quick positioning even in confined setups. The lightweight design supports fast, ergonomic use during frequent adjustments while maintaining the mechanical stability required for precise measurements, making it a useful tool for both production floors and tool rooms. Sourced and supplied for immediate application Delivered as a set, the device is ready for integration into workshop routines without protracted preparation. Manufactured by Vertex, the instrument benefits from established production processes and quality control. Metav supports reliable European distribution and acts as a quality filter for customers, ensuring accessible precision tools for workshops and service departments. For buyers seeking dependable measurement gear, the combination of a proven manufacturer and a distribution partner focused on consistent supply is a practical assurance. Contact Metav Werkzeuge for expert advice and to reserve the Vertex HP-100ZM height-setting device; email info@metav-werkzeuge.com or call +49 2822 7131930 for technical guidance and fast supply from Emmerich. Technical data SKU: HP-100ZM GTIN: 4061905095672 Height: 100 mm Accuracy: 0.005 mm Weight: 1 kg Facts Measuring range: 100 mm Repeatability: 0.005 mm Weight: 1 kg Special features Magnetic base for secure attachment Supplied as a set Manufacturer: Vertex FAQ What level of accuracy does the device provide? The HP-100ZM height-setting device from Vertex provides an accuracy of 0.005 mm, suitable for high-precision setup and repeatable adjustments in workshop environments. Can the instrument be used on machine beds and tables? Yes, the magnetic foot ensures firm fixation on ferrous machine beds and steel tables, improving the stability of height transfers with the HP-100ZM. What is the measuring range of this instrument? The device offers a measuring range of 100 mm, delivering a practical span for most tool-setting and small-part inspection tasks. Is the device suitable for portable use between stations? Weighing approximately 1 kg, the instrument is lightweight and easy to move between machines and inspection points while retaining the stability needed for precise measurement. Who manufactures the product and how is it supplied? Vertex manufactures the HP-100ZM, and it is supplied as a set for immediate use in workshop and production environments. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
100mm Horizontal Clamp 90° Three-Point Massive Arm, 3.5kN Hold Force, Black Oxide Finish - Kukamet
Take advantage of a compact workholding solution that combines a robust 100 mm holding arm, a reliable safety lock, and a high clamping capacity of up to 3,500 N for secure fixture setups. Order directly via Metav Werkzeuge or consult our specialists for application-specific advice. Horizontal toggle clamp 111 — horizontal foot, 100 mm arm (Kukamet) The Horizontal toggle clamp 111 is a compact horizontal clamp designed for secure workholding in jigs, fixtures and assembly operations, delivering strong clamping action with straightforward integration. Robust 100 mm holding arm Safety locking mechanism Clamping force up to 3,500 N Blackened finish for workshop use Reliable clamping force for stable fixtures The clamping force of 3,500 N combined with a holding force of 3,650 N provides consistent retention of workpieces during machining, welding or assembly. Strong, measurable forces reduce slippage and rework, improving throughput in repetitive production tasks. The numerical performance figures allow planners to match the clamp to required process forces reliably, supporting lean fixturing and predictable cycle outcomes. Designed for durability and safe operation A massive holding arm and an integrated safety lock prevent unintended release and protect both operator and component. The clamp’s 100 mm arm offers reach to engage a range of part geometries while the horizontal foot mounting gives a low-profile attachment for benches and fixture plates. The blackened finish signals practical workshop resilience and simplifies visual quality checks over time, contributing to a secure and durable workstation configuration. Easy integration into existing jigs and fixtures Compact weight (approx. 0.73 kg) and a fixed 90° clamping orientation make the device straightforward to retrofit into standard fixtures or new jig designs. The mechanical toggle principle gives fast actuation and repeatable positioning, helping to reduce cycle time and operator fatigue. For project planning, note the SKU B111-4-D-L-C1 for spare-part lists and procurement; Metav Werkzeuge can advise on compatibility and delivery from the Emmerich depot. Contact Metav Werkzeuge for tailored application advice, availability and to discuss how the Kukamet horizontal toggle clamp 111 fits specific fixturing requirements Technical data SKU: B111-4-D-L-C1 Model: 111 Brand: Kukamet Weight: 0.73 kg Facts Arm length: 100 mm Clamping force (max): 3,500 N Holding force (max): 3,650 N Angle: 90° Special features Horizontal foot mounting Massive holding arm Safety locking mechanism Blackened finish eClass: 21041719 ETIM: EC011973 FAQ What maximum clamping force does the clamp provide? The Kukamet horizontal toggle clamp 111 delivers a clamping force of up to 3,500 N and a holding force of 3,650 N (SKU B111-4-D-L-C1). How is the clamp mounted to a fixture? Mounting is via the horizontal foot; the design suits attachment to fixture plates and bench surfaces where a low-profile, horizontal actuator is needed. Is the clamp suitable for heavy-duty production use? Yes. The massive holding arm and integrated safety lock make the clamp appropriate for robust fixturing and repetitive production cycles. What maintenance does the clamp require? Periodic cleaning of moving joints and light lubrication of pivot points keeps the mechanism operating smoothly; inspect the safety lock for correct engagement. What are the key dimensions to consider when planning a fixture? Key values are the 100 mm arm length, 90° clamping angle and overall weight of 0.73 kg; use SKU B111-4-D-L-C1 when specifying replacement or spare parts. Can Metav Werkzeuge provide application advice for this clamp? Yes. Metav Werkzeuge can advise on fixture design and suitability for specific tasks and arrange supply from the Emmerich distribution centre. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
100mm Horizontal Clamp With 3.5 kN Clamping Force, 90° Massive Arm, Blackened Finish - Kukamet
Take advantage of a robust clamping solution that combines a massive 100 mm holding arm, a compact 90° horizontal foot and a holding force of 3,650 N for consistent fixture security; order directly via Metav Werkzeuge or consult our specialists for system integration. Horizontal toggle clamp 111 — Kukamet horizontal clamp with 100 mm arm and 3,650 N holding force Horizontal toggle clamp 111 is a horizontal lever clamp designed for reliable fixture clamping in jigs and assembly stations where compact installation and repeatable holding are essential Massive 100 mm holding arm Holding force up to 3,650 N Horizontal-foot mounting for secure bench fixing Secure clamping that keeps production moving The heavy-duty lever design delivers a high holding force while occupying minimal space, enabling tight fixturing where repeatability matters. The compact 100 mm arm provides extended reach without compromising rigidity, turning a small clamp into a dependable positioning aid. With a rated holding force of 3,650 N and a maximum pressing force of 3,500 N, the device converts operator movement into reliable clamp pressure, reducing rework and downtime through consistent part retention. Rapid fixture integration and clear functional benefits Designed for horizontal mounting, the clamp’s horizontal-foot base simplifies installation into benches, plates or modular fixtures and reduces alignment time during set-up. The lever mechanism offers rapid actuation for frequent cycle use, improving throughput in repetitive assembly tasks. At a weight of 0.72 kg, the unit combines low mass with high stability, making it suitable for both portable jig setups and permanent fixture blocks without adding unnecessary bulk to the tooling. Built to last: finish and construction for daily workshop demands The clamp is supplied with a blackened finish that resists wear and blends with industrial tooling, while the massive holding arm ensures fatigue-resistant operation under repeated loading. The 90° lever angle provides positive mechanical advantage for secure locking in horizontal applications. Materials and surface treatment focus on longevity and predictable performance, translating into fewer clamp replacements and a lower total cost of ownership over time. Practical fit for a wide range of setups As a compact horizontal lever clamp, the model suits small-batch machining, assembly jigs and inspection fixtures where reliable part security is required without a large footprint. The simple mechanical design enables easy maintenance and replacement in case of wear. Specification-driven purchasers will appreciate the clear performance figures that allow objective comparison when standardising clamps across a production cell. Choose Kukamet reliability with the horizontal toggle clamp 111 and contact Metav Werkzeuge to confirm compatibility with existing fixtures—email info@metav-werkzeuge.com or call +49 2822 7131930 for tailored advice and fast supply. Technical data SKU: B111-4-D-C1 GTIN: 8680731507034 Brand: Kukamet ETIM: EC011973 eClass: 21041719 Facts Arm length: 100 mm Holding force: 3,650 N Pressing force max: 3,500 N Angle: 90° Weight: 0.72 kg Special features Mounting type: horizontal foot Finish: blackened (Schwarz brüniert) Massive holding arm Category: Spanner FAQ What is the maximum holding force of this clamp? The Kukamet Horizontal toggle clamp 111 provides a holding force of 3,650 N, making it suitable for robust fixture retention in assembly and jigs (SKU B111-4-D-C1). Can the clamp be mounted on standard fixture plates? Yes, the horizontal-foot mounting on the Horizontal toggle clamp 111 is intended for direct bench or plate installation, enabling straightforward integration into modular fixtures. Is the clamp suitable for frequent actuation in production? The heavy-duty lever and massive holding arm of the Horizontal toggle clamp 111 are designed for repetitive use, offering durable performance in high-cycle applications. What is the material finish and how does it affect use? The clamp is supplied with a blackened finish that enhances surface wear resistance and provides a neutral appearance for industrial tooling environments. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
100mm Hydraulic Machine Vice 25 KN Clamping Force, 0.01mm Accuracy - Vertex
Take advantage of the combination of robust cast-iron construction, a 25 kN clamping capacity and a wide 0–205 mm jaw opening for secure, repeatable workholding. Order directly via Metav Werkzeuge or consult the technical team for application-specific guidance. VNC-100H Hydraulic machine vice by Vertex — 25 kN clamping, 0–205 mm opening The VNC-100H is a hydraulic machine vice engineered for stable, high-force clamping in milling and machining applications, offering precise positioning and consistent repeatability for demanding workshop use. Hydraulic clamping with 25 kN force Jaw opening 0–205 mm Cast-iron body for long-term stability Precision down to 0.01 mm Secure, high-force clamping for demanding machining Hydraulic actuation delivers a constant and powerful hold, with a 25 kN clamping force that ensures workpieces remain immobile during heavy cutting or interrupted cuts. The integrated hydraulic mechanism reduces operator effort and provides even pressure across the jaws, which translates into fewer re-clamps and a smoother machining cycle. Designed for machine‑tool integration, the vice supports reliable workholding under high load without sacrificing position stability. Repeatable accuracy that supports consistent part quality With a verified 0.01 mm accuracy class, this vice offers fine repeatability that benefits both prototype and small-batch production. The vice’s cast-iron construction provides dimensional stability and vibration damping, which together help maintain toolpath fidelity and surface finish. For workshops that rely on tight tolerances, the combination of sturdy materials and precise mechanics reduces scrap rates and rework, allowing processes to run more predictably. Practical dimensions and robust build for everyday use The compact footprint and specified dimensions (100 x 464 x 107 mm) make the vice suitable for many machine tables while its 23 kg mass contributes to secure mounting and resistance to shifting during operation. The 0–205 mm jaw opening covers a broad range of part sizes, reducing the need for multiple clamping solutions. Built to endure the repetitive cycles of a production environment, the vice requires minimal intervention beyond standard inspection and routine hydraulic checks. Engineered reliability with clear workshop benefits As a hydraulically operated machine vice from Vertex, this model combines controlled force application with a maintenance‑friendly design that supports long service life. The robust assembly reduces downtime related to slippage or jaw deformation, and the precision mechanics deliver measurable gains in process reliability. Specifying this vice helps streamline set-up times and supports higher throughput while maintaining component quality. Contact Metav Werkzeuge for tailored advice and procurement: our specialists in Emmerich can confirm compatibility with specific machines and arrange quick delivery to the workshop. Technical Data Article number: VNC-100H GTIN: 4061905083297 ETIM: EC002173 ECLASS: 21020601 Brand: Vertex Facts Weight: 23 kg Jaw opening: 0–205 mm Clamping force: 25 kN Accuracy: 0.01 mm Dimensions: 100 x 464 x 107 mm Materials & Features Material: cast iron Operation: hydraulic Suitable for milling and general machining workholding FAQ What clamping force does the vice provide? The VNC-100H provides a clamping force of 25 kN, suitable for heavy cutting operations and interrupted cuts where consistent holding power is essential. What is the available jaw opening range? Jaw opening for this hydraulic vice spans 0–205 mm, accommodating a wide variety of part sizes without auxiliary fixtures. What is the material of the vice body? The vice body is made from cast iron, chosen for its rigidity and vibration‑damping properties that support machining precision. How precise is the vice for repeatable setups? Repeatability is specified to 0.01 mm, enabling consistent repositioning and reliable tolerance control across multiple parts. How heavy is the vice and how does that affect mounting? The unit weighs 23 kg, contributing to stable mounting on the machine table and helping resist movement during heavy cutting. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
100mm L-Stop For VQC Vices Quick-Release, 0.81kg - Vertex
Compact, precisely machined end stop offering stable, repeatable positioning in VQC vises; the compact dimensions and mass minimise play and speed up fixture setups. Take advantage of stable clamping and easy integration — order the L-stop directly via Metav Werkzeuge or ask our consultants if needed. Vertex L-stop VQC-100FPF — Compact stop for VQC vises, 100 x 49 x 37 mm The L-stop is a compact end stop designed for accurate workpiece positioning and repeatable clamping in VQC vises across industrial workshops. Vertex L-stop for VQC vises Compact 100 x 49 x 37 mm Stable 0.81 kg mass for repeatability Rapid, secure mounting on VQC vises Reliable positioning for repeatable setups The compact, right-angled stop delivers a consistent reference face that reduces setup variance and supports efficient batch processing. Fitted as a fixed reference beside the clamping jaw, the stop converts a variable workpiece position into a repeatable datum, which shortens cycle times and reduces rework. The combination of the 100 x 49 x 37 mm footprint and the mass of 0.81 kg provides a stable contact surface that resists shifting under moderate machining forces, improving process predictability without complex adjustments. Fast integration that keeps production moving Designed for direct use with VQC vises, the end stop enables quick retrofitting to existing workstations and minimal downtime during changeovers. The geometry supports straightforward alignment and locking, so fixture changes require fewer manual checks and less measuring time. This rapid integration is particularly valuable in environments with mixed small-batch runs, where the ability to switch setups swiftly translates into higher productivity and more efficient use of machine time. Workshop-grade reliability and compatibility Manufactured for professional use, the component offers durable behaviour in routine clamping tasks and stable repeatability across shifts. The simple, robust design reduces potential failure modes and lowers the need for frequent recalibration. As a dedicated accessory for VQC vises, the stop complements standard clamping workflows and helps consolidate tooling choices, supporting the goal of fewer suppliers and consistent quality across jobs. Practical benefits for procurement and maintenance The compact stop is easy to store, inspect and replace if necessary, which streamlines maintenance cycles and inventory management. Its clear, compact specification simplifies procurement decisions and ensures compatibility checks remain straightforward when integrating into existing clamping systems. For purchasing and logistics, the product is available through established distribution channels that provide reliable delivery and product traceability. For reliable, repeatable positioning in VQC vises choose the Vertex L-stop VQC-100FPF — contact Metav Werkzeuge for order and technical advice at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: VQC-100FPF GTIN: 4061905083228 Dimensions & weight Dimensions: 100 x 49 x 37 mm Weight: 0.81 kg Compatibility & features Type: L-stop Application: for VQC vises Brand: Vertex FAQ What is the primary function of this stop? The stop provides a fixed reference face for accurate workpiece positioning; the Vertex L-stop creates repeatable setups in VQC vises for faster, more consistent clamping. Is the stop compatible with all VQC vises? Yes, the component is designed specifically for use with VQC vises and fits the intended mounting interfaces to ensure secure attachment and correct alignment. What are the exact dimensions and mass? The end stop measures 100 x 49 x 37 mm and has a mass of 0.81 kg, providing a compact footprint with stable contact characteristics. How does the stop improve setup times? By offering a repeatable datum next to the clamping jaw, the stop reduces the need for manual measuring between parts; the VQC-100FPF simplifies changeovers and shortens fixture preparation. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
100mm M12x1.75 Threaded Clamping Screw, Heat-Treated Steel - Vertex
Take advantage of a robust combination of heat-treated steel construction, a standard M12 x 1.75 metric thread and a 100 mm length for dependable fixture clamping; order the parts directly via Metav Werkzeuge or consult the Metav team for specification support. Clamping Screw 1344M by Vertex — M12 x 1.75, 100 mm, heat-treated steel The Clamping Screw 1344M is a precision clamping fastener designed for fixture and tooling applications in industrial workshops and production lines. Heat-treated steel for high durability Standard M12 x 1.75 metric thread 100 mm overall length for secure clamping Precision-made to Vertex quality standards Consistent clamp force through proven material choice Constructed from heat-treated steel, this clamping fastener delivers consistent clamping force over repeated cycles, reducing the need for frequent replacements. The metallurgical treatment improves wear resistance and fatigue strength, which in practice means fewer stoppages and more predictable maintenance intervals. The standard metric thread improves interchangeability with common nuts and tapped holes, enabling straightforward replacement during fixture servicing without special components. Straightforward integration into fixtures and tooling The use of a standard M12 x 1.75 thread and a 100 mm length allows the component to be integrated easily into existing jigs, clamps and bespoke fixtures. For engineers and technicians, the clear metric specification simplifies bill of materials management and spare-part planning, cutting procurement complexity. This leads to faster set-up times when changing over production runs and supports lean inventory practices in small to medium workshops as well as larger manufacturing facilities. Durable, low-maintenance component for everyday use With a weight of 0.07 kg and robust manufacture, the screw is lightweight to handle yet solid in function, helping to streamline assembly and replacement tasks on the workbench. The choice of materials and production standards ensures reliable performance under normal workshop conditions, meaning less downtime and steady throughput. Where repeatable clamping is required, the component contributes to process reliability and smoother production flow. For Vertex clamping screws and expert specification advice, contact Metav Werkzeuge for tailored guidance and reliable supply from our Emmerich quality hub Technical data SKU: 1344M GTIN: 4061905088810 Manufacturer: Vertex Specifications Material: Heat-treated steel Thread: M12 x 1.75 Length: 100 mm Weight: 0.07 kg ECLASS: 21022190 Features Standard metric thread for interchangeability Precision manufacture for consistent clamping Suitable for fixture and tooling applications Available product images and technical drawing FAQ What is the thread specification of this clamping screw? The screw is supplied with an M12 x 1.75 metric thread suitable for standard tapped holes and nuts. Which material is used for the fastener and what does that mean for durability? Made from heat-treated steel, the fastener offers improved wear resistance and fatigue strength, supporting longer service life in repetitive clamping tasks. Can this component be used in bespoke jigs and fixtures? Yes, the 100 mm length and standard thread profile make the component compatible with common jigs, clamps and bespoke fixtures; the 1344M is engineered for such applications. What distinguishes this product as a Vertex part? Vertex quality standards ensure precision manufacture and consistent dimensions, which helps maintain repeatable clamping force and interchangeability across production equipment. Is technical documentation available for installation and inspection? Technical drawings and product images accompany the listing for the 1344M to support correct installation and inspection procedures. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
100mm M18x2.5P Clamping Screw, Hardened Steel - Vertex
Robust construction and standard dimensions combine to deliver reliable clamping performance in demanding setups; the M18 x 2.5 thread and 100 mm length provide secure engagement while the heat-treated steel body keeps service life high. Order directly via Metav Werkzeuge or consult the team for application-specific advice. Clamping screw 1364M — M18 x 2.5 thread, 100 mm, Vertex A clamping screw engineered for secure fixture in machine tooling and clamping assemblies, offering standard thread compatibility and a durable, heat-treated finish. Heat-treated steel construction for long life M18 x 2.5 thread for standard clamping systems 100 mm length for deep engagement Compact weight of 0.16 kg for easy handling Precision fastening that keeps setups true The design focuses on repeatable, secure clamping: the standardised M18 x 2.5 thread and 100 mm shank length ensure compatibility with common clamping plates and fixtures, reducing adjustment time. The component’s geometry minimises play under load, which supports consistent positioning and contributes to overall process stability. Such predictability is particularly valuable in setups where repeat runs and high tolerances are required, delivering measurable gains in uptime and quality. Durable material for reduced downtime Constructed from heat-treated steel, the fastener resists wear and maintains clamping force over extended cycles. Heat treatment increases tensile strength and surface hardness so that the element resists deformation in frequent tightening and release operations. The modest weight (0.16 kg) makes handling and replacement straightforward without compromising robustness. These properties translate into lower maintenance intervals and fewer interruptions on the shop floor, supporting efficient production schedules. Practical compatibility and confident sourcing The straightforward specification simplifies procurement and integration into existing tooling stocks: common thread pitch, clear dimensional data and a recognised brand mean fewer compatibility checks and faster fitment. Metav’s role as a European quality filter adds an additional layer of assurance — combining decades of expertise, a broad product range and local distribution from Emmerich ensures both availability and informed advice for industrial and workshop buyers. This helps small to medium operations access precision components with the same reliability expected by larger manufacturers. Contact Metav Werkzeuge for availability of Vertex clamping screws and tailored technical advice from the Emmerich team to ensure the correct specification for each clamping application Technical data SKU: 1364M GTIN: 4061905090257 Manufacturer: Vertex Facts Thread: M18 x 2.5 Length: 100 mm Weight: 0.16 kg eClass: 21022190 Special features Material: heat-treated steel Intended use: clamping / fixture applications Brand: Vertex FAQ What materials is this clamping screw made from? The clamping screw is made from heat-treated steel, giving the Vertex fastening element improved strength and wear resistance for industrial clamping tasks. Is the thread compatible with standard M18 fittings? Yes, the component features an M18 x 2.5 thread suitable for standard M18 fittings and clamping systems, as specified for SKU 1364M. How long is the shank and what engagement does it provide? The shank length is 100 mm, providing deep engagement for thicker fixtures or where extended reach is required in assemblies. Can this screw be used in heavy-duty production environments? The heat-treated construction and standardised thread make the part appropriate for frequent use in production settings where reliable clamping and reduced wear are necessary. Where can compatibility or torque recommendations be obtained? Technical guidance and compatibility advice are available through Metav Werkzeuge; the Vertex clamping screw details (SKU 1364M) can be confirmed with their specialist team. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
100mm Parallel Gauge Block Set Ground, Assorted Sizes 2x–22x with Clamps, 0.01mm Accuracy - Vertex
Take advantage of the combination of precision-ground reference surfaces and a 0.01 mm tolerance to ensure repeatable set-ups and reduced rework; order the set directly via Metav Werkzeuge or consult our specialists for application advice. VP-100 Parallel block set by Vertex — precision-ground, calibrated to 0.01 mm The VP-100 Parallel block set is a precision-ground toolkit for accurate workholding and setup in machining and inspection applications, designed to provide stable reference faces and reliable height support. Precision-ground parallels, tolerance 0.01 mm Comprehensive range from small to larger sizes Includes two clamping brackets for secure holding Heavy, stable set for vibration-free setup Constant reference for repeatable machining accuracy A precision-ground set delivers a stable datum that reduces setup variation and scrap. The ground surfaces provide an exact bearing that is easy to replicate across multiple jobs, enabling repeatable set-ups and consistent part quality. With an indicated tolerance of 0.01 mm, the kit supports fine positional control when aligning workpieces for milling, drilling or inspection. These characteristics shorten alignment time and improve throughput by reducing the need for frequent re-measurement. Flexible support for a wide range of workpieces The included parallels cover a broad spectrum of heights and contact areas, allowing secure support for small components as well as larger workpieces. This comprehensive selection simplifies fixture construction and makes it possible to adapt quickly to different clamping scenarios on a machine table or inspection bench. The presence of dedicated clamping brackets means the parallels can be locked in place for vibration-free operation, improving machining consistency and reducing operator intervention between cycles. Robust design tailored for everyday workshop use Designed for regular workshop handling, the set offers a balanced mass that contributes to stability during machining. The overall weight of 11.7 kg gives the kit a sturdy feel and helps resist movement under cutting forces. Surfaces finished by precision grinding are less prone to rapid wear, which maintains accuracy over time and lowers lifecycle costs. The kit’s layout and solid build support efficient storage and rapid retrieval, so setups remain quick without compromising on durability. For precision-critical setups, request the Vertex VP-100 parallel block set through Metav Werkzeuge and discuss the optimal configuration for specific applications with our Emmerich-based specialists Technical Data Article number: VP-100 Manufacturer: Vertex GTIN: 4061905084270 eClass: 21170610 Facts Dimensions: 390 × 292 × 84 mm Weight: 11.7 kg Accuracy: 0.01 mm Pieces per set: 18 Special features Precision-ground finish Contents: parallels 5×16×100 mm, 6×18×100 mm, 8×24×100 mm, 10×30×100 mm, 12×36×150 mm, 14×48×150 mm, 18×60×150 mm, 22×62×150 mm Includes two clamping brackets 15×31×2.5×200 mm Suitable for machining table setup and inspection fixtures FAQ What level of accuracy can be expected from this set? The VP-100 parallel block set from Vertex is specified with an accuracy of 0.01 mm, providing a precise reference for alignment and measurement tasks. Which sizes are included in the set? The kit contains a range of parallels from small to larger footprints (examples: 5×16×100 mm up to 22×62×150 mm) plus two clamping brackets, offering versatile support options for various workpieces. Can the set be used for both setup and inspection tasks? Yes, the precision-ground reference faces make the VP-100 suitable for workholding on machine tables and as stable supports on inspection benches. How should the parallels be maintained to preserve accuracy? Keep the parallels clean and dry, avoid shocks, and store them in their protective case or a reserved drawer to maintain the ground surfaces and dimensional stability. Are clamping brackets supplied with the set? Yes, the set includes two clamping brackets that allow secure fixation of the parallels for machining and measurement operations. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
100mm Parallel Gauge Set Precision Pair Ground, Hardened, 20 Pairs, IT5 ±0.01mm - AMF
Secure consistent assembly and fixturing with a set engineered for exact stacking and minimal variation; the hardened, pairwise plan-parallel plates offer ±0.01 mm height accuracy and enable quick, reliable shimming in 1 mm increments — order through Metav Werkzeuge or consult the advisers for specification matching. AMF Parallel shim set No. 6348P – 100 mm, pairwise precision shims the AMF Parallel shim set No. 6348P is a precision shimming solution for accurate height adjustment and toolbox-ready fixture alignment in workshop and production environments Pairwise plan-parallel, finely ground Case-hardened for long service life Height tolerance ±0.01 mm (IT5) Stackable in 1 mm increments Faster, more reliable setup through precision shimming The set provides 20 pairs of 100 mm shims that are pairwise plan-parallel and finely ground, which makes them ideal for accurate machine set-up and repeatable fixturing. Because each pair is matched and case-hardened, the risk of deformation under clamp load is reduced, preserving alignment and minimising rework. The combination of matched pairs and a clear stacking system cuts adjustment time, translating into measurable productivity improvements on assembly lines and jigs. Measurable accuracy that supports quality assurance Manufactured to tight tolerances with a pair tolerance tp in the height IT5 and nominal height tolerance ±0.01 mm, the plates enable precise compensation of misalignment where micron-level control matters. Compliance with DIN ISO 2768 m for the remaining dimensions ensures predictable integration with existing tooling. For tasks requiring reproducible gap control or calibrated reference heights, these shims offer a technical basis for traceable processes and lower scrap rates. Durable design tailored for industrial handling and storage Delivered as a comprehensive set, the shims are optimised for repeated use: hardened surfaces resist wear, while the fine grind maintains planarity under load. Sets are arranged to allow 1 mm stacking increments, simplifying the selection of the correct build-up without trial-and-error. The format supports both precision toolrooms and busy production bays where robust, easy-to-identify shimming solutions are required. For precision shimming from AMF, contact Metav Werkzeuge in Emmerich for expert advice and fast supply — Metav’s team can confirm compatibility with specific fixtures and ordering options Technical Data Article number: 4123321018NW Type: Nr. 6348P - 100 Label: Parallelunterlagensatz Nr.6348P Inh.20 PA Gr.100 Präzision L.100mm AMF Manufacturer: AMF Product type: Parallel shim set Content: 20 pairs Facts Length: 100 mm Quantity: 20 pairs Pair tolerance: tp in height IT5 Nominal height tolerance: ±0.01 mm Stacking increments: 1 mm Special features Pairwise plan-parallel, finely ground Case-hardened for wear resistance Sets provide a range with 1 mm steps Remaining dimensions to DIN ISO 2768 m FAQ What materials are these shims suitable for in fixture work? The AMF parallel shim set No. 6348P is a general-purpose shimming solution intended for steel and common fixture materials; material compatibility depends on application loading and environment, with the hardened finish providing broad suitability. How precise is the height control when stacking plates from this set? Stacking plates from the set yields step-controlled height adjustments in 1 mm increments with a nominal height tolerance of ±0.01 mm, allowing precise and repeatable build-ups. Are the shims matched within pairs for planarity? Yes, each pair is matched and plan-parallel, finely ground, ensuring consistent contact surfaces and minimised variation when used under clamping pressure. Can these shims be used in calibrated measurement setups? The set’s tight height tolerance and pairwise matching support use in setups requiring repeatable reference heights; however, final suitability depends on the specific metrology chain and requirements. What is the product reference for ordering or specification checks? Refer to SKU 4123321018NW and type Nr. 6348P - 100 when specifying the AMF parallel shim set for procurement or technical verification. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
100mm Pneumatic Clamp Horizontal Base, 3,000 N Thrust, 95° Arm, Galvanised – Kukamet
The combination of a 100 mm heavy-duty arm, up to 3,300 N holding force and a zinc-plated, corrosion-resistant construction ensures consistent, repeatable clamping in production environments; order the clamp directly via Metav Werkzeuge or consult our technical advisers for application guidance. Pneumatic clamp 631 — Kukamet, 100 mm arm, zinc-plated The Pneumatic clamp 631 is a pneumatic clamping device engineered for robust fixture work and repetitive clamping tasks in industrial and workshop settings. 100 mm heavy-duty arm Horizontal base mounting Up to 3,300 N holding force Zinc-plated corrosion resistance Secure, repeatable clamping for continuous production The pneumatic design delivers a controlled actuation with a max. actuation force of 3,000 N and a holding force of 3,300 N, offering reliable retention for series production. This level of clamping stability reduces part movement during machining and assembly, decreasing scrap rates and increasing process reliability. The pneumatic actuation provides consistent stroke motion and repeatability, which is especially valuable where manual clamping would introduce variability. For users less familiar with pneumatic systems, the key point is that the actuator converts compressed air into a steady mechanical force that maintains workpiece position without continuous manual intervention, supporting higher throughput and predictable cycle times. Robust construction for long service intervals Built with a massive holding arm and finished in zinc-plated material, the clamp resists wear and corrosion in demanding shop-floor conditions. The heavy-duty arm reduces flex under load and helps maintain precise alignment over repeated cycles, lowering the frequency of adjustments and unscheduled maintenance. The corrosion-resistant surface treatment extends component life in humid or industrial atmospheres, while the sturdy design minimises the risk of deformation under sustained clamping loads. As a result, maintenance intervals are extended and total life-cycle cost is reduced compared with lighter-duty alternatives. Flexible mounting and practical reach for fixtures The clamp features a horizontal base for secure mounting and a lever geometry with a 95° operating angle, providing accessible clearance in tight jig assemblies. The 100 mm arm grants useful reach for a variety of part sizes and tooling arrangements, allowing integration into custom jigs, fixture plates and automated cells. The compact footprint and standard base make it straightforward to position the device where repeated access and unobstructed tool paths are required. The mechanical simplicity of the lever-style clamp supports straightforward retrofitting into existing fixtures without complex redesign. Dependable supply and industrial readiness Supplied by Kukamet and distributed via Metav Werkzeuge, the clamp is positioned for workshop and industrial environments where consistent availability and verified quality matter. Metav’s role as a quality filter for the European market, combined with a broad product range, supports reliable procurement and reduced supplier complexity. The device’s measurable parameters — arm length, actuation and holding forces and mounting type — provide a clear basis for specifying and verifying suitability for production tasks, aligning purchasing decisions with technical requirements and operational goals. Discuss application requirements with Metav Werkzeuge to ensure the Kukamet Pneumatic clamp 631 meets individual fixture demands and to receive tailored procurement advice from our technical consultants Technical Data Article number: 631-4-D-C1 Product name: Pneumatic clamp 631 Manufacturer: Kukamet Facts Arm length: 100 mm Actuation force max: 3,000 N Holding force max: 3,300 N Angle: 95° Special features Mounting: horizontal base Material: zinc-plated Massive holding arm Category: Clamping devices FAQ What clamping forces can be expected from the 631 clamp? The Kukamet Pneumatic clamp 631 provides a max. actuation force of 3,000 N and a holding force of up to 3,300 N, suitable for demanding fixture applications. How is the clamp mounted in a jig? The device uses a horizontal base mounting, allowing secure attachment to fixture plates and jig blocks for stable operation. Is the clamp suitable for harsh shop-floor conditions? Yes, the zinc-plated finish and robust arm design give the Pneumatic clamp 631 improved corrosion resistance and durability in industrial environments. What advantages does the 100 mm arm provide? The 100 mm arm offers extended reach and clearance in fixtures, enabling access to a wider range of part geometries without obstructing tooling. Who supplies and distributes this clamp in Europe? The clamp is manufactured by Kukamet and distributed via Metav Werkzeuge; the SKU is 631-4-D-C1 for order and specification purposes. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Secure components with reliable workpiece clamps
Workpiece clamps, also known as workholding clamps or workholding devices, form the essential mechanical interface between machine and part in industrial fabrication. They keep components absolutely play-free, positionally accurate and vibration-resistant during milling, turning, drilling or grinding.
How workpiece clamps ensure process stability
A correctly specified clamping concept transfers the high cutting and feed forces of modern CNC machines into the machine table or spindle without deforming the part. The right combination of mechanical, hydraulic, pneumatic or magnetic solutions enables fast, repeatable setups and supports automated part change where required. Typical applications range from single-part turning to high-volume series milling and complex five-axis machining.
Concrete production benefits at a glance
- repeatable positioning: reduces scrap and rework
- high clamping forces: withstands aggressive cutting without part movement
- reduced set-up time: modular systems and quick-change features speed throughput
- improved surface finish: vibration damping for finer results and tighter tolerances
- flexible compatibility: vices, chucks, clamping plates and zero-point systems for diverse geometries
Why Metav's range is the practical choice
Metav combines decades of specialist know-how with a broad, handpicked range that democratises precision for workshops and industry alike. Based in Emmerich, Metav acts as a quality filter for the European market and supplies more than 250,000 products from precision metrology to complete workshop equipment. With the trust of over 48,000 customers, Metav offers a single-source approach that reduces supplier complexity and secures dependable delivery to your workbench.
Technical data
- function: mechanical interface between machine and workpiece
- primary requirements: absolute positional accuracy; vibration reduction; high clamping forces
- technologies: mechanical, hydraulic, pneumatic, magnetic
- typical components: machine vices; chucks; clamping plates; zero-point systems; pratzen; clamping jaws
- application areas: milling; turning; drilling; grinding; automated part change systems
- production benefits: reduced set-up time; enhanced process security; optimised series and single-part production
The practical summary
Workpiece clamps bring the stability and repeatability required to meet tight tolerances and excellent surface quality, making them indispensable across machining operations. Choosing the right workholding clamps and modular workholding devices is a decisive step towards higher productivity and consistent part quality.
FAQ
What types of workpiece clamps are suitable for automated machining?
Workholding clamps with quick-change modules, hydraulic actuation or magnetic systems are commonly used for automated machining. These workholding devices enable fast, repeatable part changes and integrate with zero-point systems.
How do workpiece clamps affect surface finish and tolerances?
A stable clamping concept minimises vibration and part movement; this improves surface finish and supports achieving narrow tolerances when using high-precision workpiece clamps or workholding devices.
Can the same workpiece clamps handle different part geometries?
Modular workholding clamps and adaptable clamping jaws allow flexible fixturing for varied geometries; combining vices, clamping plates and pratzen increases versatility on the shopfloor.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com