Secure and precise workholding for metalworking productivity
Workholding devices such as workpiece clamps and chuck systems provide absolute positional stability and vibration damping during milling, turning, drilling and grinding, ensuring parts remain free of play under high CNC cutting and feed forces. By transferring clamping loads into the machine table or spindle without deforming the component, a well engineered workholding solution improves machining accuracy, surface finish and process reliability while reducing set-up times. Modular systems from machine vices and chucks to zero-point systems and specialised fixtures enable fast changeovers and support both serial and single-part production, delivering consistent clamping force, repeatability and enhanced throughput.
ER-40 Collet Set With NT-50 Taper SK Holder 23pcs - Vertex
Benefit from the combination of ER-40 precision collets and an NT-50 taper interface for secure, repeatable clamping; the 23-piece set (SKU V-217) delivers interchangeability and workshop-ready robustness. Order the collet set directly via Metav Werkzeuge or consult our specialists for application advice. Collet set V-217 — ER-40 collets with NT-50 taper by Vertex The Collet set V-217 provides precision clamping for NT-50 spindle interfaces and general workshop milling and drilling applications ER-40 precision collet system NT-50 taper mounting Complete interchangeable collet set Reliable industrial clamping solution Consistent concentric clamping for higher throughput The V-217 collet set is engineered around the ER-40 system, which prioritises concentricity and minimal runout to support fine machining tolerances. By using a standardised collet geometry, the clamping system improves repeatability between setups and reduces the risk of rework. This results in more reliable part quality during serial production and shorter inspection loops, contributing to measurable process stability on the shop floor. Secure NT-50 interface for stable setups A robust NT-50 taper provides the mechanical interface between spindle and chuck, ensuring stable transmission of torque and axial forces. The taper mounting reduces micro-movement under load, which is particularly beneficial during finishing passes and when using long-reach tooling. Clear matching of taper and collet type simplifies machine compatibility assessment and supports safe, vibration-resistant operation in both trade and industrial environments. Practical design for workshop efficiency Supplied as a complete set, the package offers rapid collet interchangeability and straightforward organisation for frequently changing tools. The compact arrangement and clear labelling of components speed up tool changeovers, cutting machine idle time and contributing to smoother production flow. Built for everyday use, the clamping system combines functional design with practical handling to keep changeovers predictable and fast. What operators gain in everyday use Operators and maintenance staff benefit from a modular clamping solution that reduces downtime and simplifies spare-part management. The set’s compatibility with standard ER-40 tooling makes replacement straightforward and supports a broad tooling inventory without special adapters. For workshops aiming to consolidate suppliers while maintaining accuracy, this collet solution offers a balance of versatility and dependable performance. Contact Metav Werkzeuge in Emmerich for detailed application guidance on the Vertex V-217 NT-50 / ER-40 collet set or to arrange direct supply from stock. Technical data SKU: V-217 GTIN: 4061905095054 Manufacturer: Vertex ECLASS: 21022190 Facts Weight: 9.8 kg Pieces per set: 23 Taper: NT-50 Collet type: ER-40 Special features Supplied as a set Includes collet chuck with NT-50 taper mounting ER-40 precision collets Product image available FAQ What collet system is included in the set? The set contains the ER-40 collet system as supplied in the Vertex V-217 package. Which taper does the chuck use? The chuck uses an NT-50 taper interface for spindle mounting. How many pieces are supplied with the set? The Vertex V-217 is supplied as a complete set with 23 pieces. Is the collet set suitable for production machinery? Yes, the ER-40 system combined with a NT-50 taper offers the stability and repeatability required in many production and trade applications. How does this set affect changeover times? Interchangeable ER-40 collets and a straightforward chuck interface reduce tool change complexity and shorten machine downtime. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
ER-40 Collet Set With NT-50 Taper, 15 Pc Collets In Holder - Vertex
Take advantage of the combination of ER-40 precision, NT-50 SK taper compatibility and robust industrial construction for reliable toolholding and consistent production results. Order or enquire via Metav Werkzeuge for expert advice and fast delivery from a quality-controlled European stock. Collet set V-218 – ER-40 collets with NT-50 SK taper by Vertex The Collet set V-218 is a precision ER-40 collet chuck set with an NT-50 SK taper, intended for secure toolholding in milling machines and machining centres where repeatability and stable clamping are essential. ER-40 precision collets for concentric clamping NT-50 SK taper holder for secure spindle connection Complete set with assorted collet sizes Robust construction, industrial workshop grade Stable clamping for consistent machining performance A collet system designed for repeatable results reduces set-up time and rejects. The ER-40 collets included in this set provide precision concentric clamping that stabilises rotating tools and minimises runout during milling and drilling operations. Reduced runout supports tighter tolerances and improves surface finish, which in turn increases first-pass yield and lowers rework rates. The clear mechanical function of the clamping system makes it suitable for production runs as well as maintenance of prototype workpieces. Compatibility with NT-50 spindles and secure connection The NT-50 SK taper provides a standardised interface to many industrial spindles; the holder form ensures rigid contact and reliable torque transfer under load. This mechanical pairing enhances spindle stability and contributes to consistent tool engagement during heavier cuts. For workshops standardising on SK/NT tapers, the interface simplifies tool management and reduces the number of adapters required, supporting streamlined tooling workflows and predictable machining performance. Practical set composition for workflow efficiency Supplied as a complete set, the package reduces the need to source individual collets and supports quick tool changes during shift work. The assortment of collets enables flexible adaptation to a range of tool shank diameters, which simplifies inventory handling and shortens machine downtime caused by missing or incompatible holders. Clear labelling and standard ER-40 geometry make the set straightforward to integrate into existing tool stations and holders, improving shop-floor organisation and throughput. Durable design and workshop suitability Constructed for industrial environments, the components are intended to withstand regular handling and routine cleaning common in machining shops. The mechanical simplicity of the collet system limits the number of wear-prone parts and supports straightforward inspection routines. Supplied through Metav Werkzeuge’s quality-filtered European stock, the package benefits from a distributor approach that emphasises consistent quality and reliable supply chains for precision tools. For dependable ER-40 clamping with NT-50 compatibility, contact Metav Werkzeuge to secure the Vertex V-218 collet set and benefit from expert guidance and rapid dispatch from our Emmerich warehouse Technical data Article number: V-218 GTIN: 4061905095474 Manufacturer: Vertex Facts Weight: 8.5 kg Pieces per set: 15 Taper: NT-50 Collet type: ER-40 Special features Set: yes eClass: 21022190 SKU: V-218 FAQ What spindle taper is compatible with this set? The set is designed for an NT-50 SK taper connection; the V-218 collet set by Vertex fits spindles accepting NT-50 interfaces. Which collet form is included in the set? The V-218 comprises ER-40 collets and a collet chuck configuration matching ER-40 geometry for concentric clamping. How many pieces are supplied in the set? The Vertex V-218 is supplied as a complete set containing an assortment of ER-40 collets for workshop flexibility. Is the set suitable for production milling centres? Yes; the collet system and NT-50 holder are intended for use in milling machines and machining centres where stable toolholding and repeatability are required. Who is the manufacturer of this collet set? The collet set V-218 is manufactured by Vertex and distributed through Metav Werkzeuge; see the manufacturer details below for full information. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
ER-50 Collet Set With MT-5 Taper Collet Chuck, 12 Pieces - Vertex
Take advantage of a robust combination of wide clamping range and straightforward spindle compatibility to maintain efficient tool changeovers and reliable runout control. The set combines ER‑50 collets with an MT‑5 taper chuck for universal mounting in standard spindles; order directly via Metav Werkzeuge or consult the specialists for application advice. Vertex ER‑50 Collet Set V‑437 — MT‑5 Taper Collet Chuck Kit The Vertex ER‑50 Collet Set offers precision workholding for milling and drilling spindles, featuring an MT‑5 taper collet chuck for secure mounting in standard machine tapers. ER‑50 system for robust clamping MT‑5 taper for standard spindle fit Complete set ensuring tool versatility Durable construction for workshop use Consistent precision for repeatable machining The ER‑50 clamping system is engineered for high concentricity and stable axial retention, making it suitable for demanding metalworking tasks where runout must be minimised. With an emphasis on mechanical reliability, the collets ensure tools are held concentrically during rotation, which reduces vibration and improves surface finish. The result is a measurable reduction in rework and more consistent part quality, particularly relevant for series production or high-precision one-off components. Highlighted here is the direct benefit of improved process yield from reliable clamping rather than abstract claims. Seamless compatibility and efficient integration Fitted with an MT‑5 taper, the chuck integrates with machines that accept Morse taper 5, providing a straightforward mechanical interface that simplifies tooling logistics. The set format supports a broad range of tool diameters available within the ER‑50 range, reducing the number of separate holders required on the shop floor. This helps to streamline tooling inventories and minimise changeover times, offering a clear operational advantage in mixed production environments. Compatibility-focused design means fewer adapters are needed, enabling faster set‑ups and reducing idle machine time. Built to withstand workshop conditions and support uptime Constructed for regular use in industrial workshops, the kit is conceived to resist everyday handling and maintain clamping performance over many cycles. The combination of the chuck and matched collets provides uniform contact pressure and wear distribution, which extends component life and preserves accuracy. Regular maintenance remains straightforward because the system uses standard replacement collets and widely understood assembly, so downtime is limited to planned intervals. For procurement managers and shop supervisors, the emphasis is on predictable service life and lower total cost of ownership rather than just initial acquisition. Contact Metav Werkzeuge in Emmerich for tailored advice or to request supply of the Vertex ER‑50 collet set V‑437; assistance is available via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: V‑437 GTIN: 4061905096020 Manufacturer: Vertex Facts Weight: 9.5 kg Collet type: ER‑50 Taper: MT‑5 Pieces per set: 12 eClass: 21022190 Special features Collet chuck with MT‑5 taper Complete collet set included Designed for workshop use SKU: V‑437 FAQ What taper does the chuck use and which machines is it compatible with? The chuck uses an MT‑5 taper; the Vertex ER‑50 collet set V‑437 is compatible with machines that accept Morse taper 5 spindles. How many collets are included in the set? The set contains 12 pieces; the Vertex ER‑50 kit V‑437 is supplied as a complete collection of matched collets. Is the ER‑50 system suitable for high‑precision finishing operations? Yes, the ER‑50 system in this kit is designed to provide high concentricity and consistent clamping, supporting precision finishing when properly fitted. Can the set be used for rapid tool changes in a production environment? The matched chuck and collets permit efficient changeovers; the Vertex ER‑50 collet set V‑437 reduces the need for multiple holders and helps shorten set‑up times. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
ER-50 Collet Set With MT4 Collet Chuck, 12 Pieces — Vertex
Take advantage of a robust ER‑50 collet system combined with an MT‑4 taper for secure spindle mounting and consistent runout control; the set supports efficient tool changes and dependable production uptime. Order directly via Metav Werkzeuge or consult the Metav advisors for clarification. Collet Set V‑433 — ER‑50 Collets with MT‑4 Taper (Vertex) The Collet Set V‑433 is a precision toolholding kit for industrial lathes and milling spindles, supplying ER‑50 collets and a matching MT‑4 taper collet chuck for rigid mounting and repeatable clamping performance ER‑50 collet system for broad clamping range MT‑4 taper for secure machine spindle mounting Set contains 12 precision collets Robust construction, total weight 9 kg Reliable clamping for uninterrupted production The ER‑50 configuration delivers a high clamping force and low runout, which translates into improved machining accuracy and longer tool life. Designed for demanding workshop environments, the system keeps axial and radial movement to a minimum, supporting finer surface finishes and closer dimensional tolerances. The combination of precise collet geometry and firm seating in the taper reduces vibration and increases cutting stability, helping to maintain consistent piece-to-piece quality on serial production runs. Fast mounting and broad machine compatibility Fitted with an MT‑4 taper, the collet chuck offers straightforward mounting to compatible spindles, enabling rapid changeovers without complex adapters. The included chuck facilitates immediate installation on machines accepting Morse taper shanks, reducing setup times and easing integration into existing toolholding arrangements. Clear mechanical interfaces and standardised dimensions mean less downtime during tool changes, supporting faster throughput and predictable scheduling in the workshop. Built for workshop durability and dependable accuracy Manufactured by Vertex and supplied as a complete set, the system emphasises robustness and repeatability. The solid construction withstands routine handling and the mechanical stresses of production environments, offering a dependable basis for precision work. Routine maintenance is simple and quick, and the stable clamping behaviour preserves cutting-edge geometry and reduces premature tool wear. For technical clarification regarding suitability for a specific machine model or application, Metav’s consultants can provide tailored advice. Contact Metav Werkzeuge in Emmerich for expert guidance on the Vertex V‑433 collet set and reliable supply from our European stock; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: V‑433 GTIN: 4061905095986 Manufacturer: Vertex Weight: 9 kg Taper: MT‑4 Collet type: ER‑50 Set: Yes Pieces per set: 12 Facts Weight: 9 Pieces per set: 12 GTIN numeric: 4061905095986 Special features ER‑50 collet system MT‑4 taper mounting Delivered as a complete set Manufacturer: Vertex FAQ What machines is the collet set suitable for? The collet set is designed for machines that accept an MT‑4 taper; the Vertex V‑433 with ER‑50 collets fits spindles and tailstocks compatible with that taper standard. How many collets are supplied with the set? The Vertex V‑433 set contains 12 precision collets supplied together with the matching collet chuck. Is the clamping system robust enough for serial production? Yes, the ER‑50 geometry and MT‑4 taper pairing provide stable clamping and low runout, making the set suitable for repetitive production tasks requiring consistent accuracy. What is the total weight of the complete set? The complete Vertex V‑433 set has a total weight of 9 kg. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
ER-50 Collet Set With NT-40 Taper Collet Chuck, 12 Pieces - Vertex
Take advantage of stable, high-capacity clamping and a rigid NT-40 taper connection to maintain production accuracy. The combination of ER-50 collets and a matched NT-40 collet chuck delivers repeatable concentricity and efficient tool changes. Order the Vertex collet set directly via Metav Werkzeuge or consult our specialists for application advice. Collet set V-213 — ER-50 collets with NT-40 taper (Vertex) The Collet set V-213 is a comprehensive ER-50 clamping solution with an NT-40 taper chuck, designed for secure tool holding in demanding workshop and industrial machining contexts ER-50 collets for high clamping capacity NT-40 taper for stable spindle connection Complete set with collet chuck included Robust construction for workshop use Secure and repeatable clamping for consistent parts The clamping system is engineered for precision: the ER-50 collets provide a large clamping range and high grip force, reducing slippage during heavy cuts. This results in improved repeatability and fewer rework cycles. The collet geometry supports uniform compression around the tool shank, which helps maintain concentricity and low runout, thus protecting cutting tools and improving surface finish. Rigid taper connection that stabilises machining A rigid taper interface is crucial under load. The NT-40 taper used for the chuck ensures a solid spindle connection that resists deflection and vibration during milling and drilling. By combining a proven taper standard with a matched collet chuck, the system increases cutting stability and allows longer tool life. Expect more consistent machining forces and enhanced process reliability when working with medium to heavy-duty operations. Faster changeovers and improved workflow efficiency Supplied as a set, the clamping solution reduces setup time and streamlines changes between tools and cutters. The included chuck facilitates straightforward insertion and removal of collet holders, which speeds up repeat operations on the shopfloor. Improved handling and fewer adaptors reduce inventory complexity and help maintain production uptime — a practical advantage in batch production and maintenance environments. Built for workshop durability and supported by Metav quality Manufactured by Vertex, the assembly is designed for continuous use in industrial settings and constructed to withstand routine handling. Sourced through Metav Werkzeuge, customers benefit from a European quality filter and reliable logistics from Emmerich. Metav’s experience and broad product range ensure accessible spare parts and consistent supply, supporting long-term operational stability and confidence in procurement decisions. Contact Metav Werkzeuge in Emmerich for detailed specifications or to request a quotation for the Vertex V-213 collet set with NT-40 taper Technical data Article number: V-213 GTIN: 4061905095016 Manufacturer: Vertex Core technical data Weight: 10 kg Taper: NT-40 Collet type: ER-50 Pieces per set: 12 Special features Set includes collet chuck with NT-40 taper Suitable for workshop clamping applications Brand: Vertex eClass: 21022190 FAQ What taper does the set use and is it industry standard? The set uses an NT-40 taper; the Vertex V-213 is designed for machines accepting NT-40 tapers and provides a secure spindle interface. Which collet size family is included in the set? The set is based on the ER-50 collet family, offering a wide clamping range and high clamping capacity suitable for larger shank diameters. How many collets are supplied in the set? The Vertex V-213 is supplied as a full set with 12 collets included for flexible workshop use. Is the system suitable for heavy-duty milling and drilling? Yes, the combination of a rigid NT-40 taper and ER-50 clamping makes the set appropriate for medium to heavy-duty machining where stability and low runout are required. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
Erweiterbarer Maschinenschutz
Technische Daten: Bezeichnung: Maschinenschutz Vollhartmetall Material: Gummi Abmessung: 370x750mm - 600x850mm Geeignet für: Hinterseite oder Vorderseite je nach Ausführung Gewicht: 0,3 kg - 2 kg Die technischen Daten beziehen sich auf alle Varianten und können je nach Ausführung variieren. Vertex, der Hersteller in einigen Worten: Seit 1978 ist VERTEX der größte Hersteller für Maschinenteile in Taiwan. Mit einer beeindruckenden Produktionsfläche von über 15000 m² ist VERTEX in der Lage, große Mengen hochwertiger Maschinenteile herzustellen, um den Bedürfnissen der Kunden gerecht zu werden. Das Unternehmen hat sich auf Forschung und Entwicklung spezialisiert und ist stets bestrebt, innovative Designs zu entwickeln. Die hohe Lagerverfügbarkeit von 98% aller Artikel stellt sicher, dass die Kunden schnell und effizient bedient werden können. VERTEX hat sich einen hervorragenden Ruf aufgebaut, indem es qualitativ hochwertige Produkte liefert und gleichzeitig erstklassigen Kundenservice bietet. VERTEX ist der vertrauenswürdige Partner für Maschinenteile in Taiwan.
Fine Pole Magnetic Plate
Technische Daten: Bezeichnung: Magnetspannplatte Vollhartmetall Abmessung: 100x175mm bis 300x600mm Gewicht: 7 kg bis 77 kg Typ: A, S Magnetkraft: 30 Kg Höhe: 50mm Die technischen Daten beziehen sich auf alle Varianten und können je nach Ausführung variieren. Das ist der Hersteller in einigen Worten: Mit einer Erfahrung von über vier Jahrzehnten hat VERTEX sich als größter Hersteller für Maschinenteile in Taiwan einen Namen gemacht. Seit der Gründung im Jahr 1978 hat das Unternehmen kontinuierlich in seine Produktionskapazitäten investiert und verfügt nun über eine beeindruckende Fläche von mehr als 15000 m². VERTEX ist stolz darauf, sich auf Forschung und Entwicklung zu konzentrieren, um innovative Designs zu schaffen, die den steigenden Anforderungen der Branche gerecht werden. Darüber hinaus ist VERTEX dafür bekannt, dass 98% aller Artikel sofort ab Lager verfügbar sind. Diese hohe Lagerverfügbarkeit ermöglicht es den Kunden, ihre Produktionsausfallzeiten zu minimieren und ihre Maschinen reibungslos zu betreiben. VERTEX bleibt seiner Mission treu, qualitativ hochwertige Maschinenteile herzustellen und den Kunden einen erstklassigen Service zu bieten.
Flansch
Technische Daten: Bezeichnung: Flansch Vollhartmetall Abmessung: 19x8mm bis 50x32mm Gewicht: 0,013 kg bis 0,3 kg Gewinde: 1-8" bis M8x1,25mm Die technischen Daten beziehen sich auf alle Varianten und können je nach Ausführung variieren. Vertex, der Hersteller in einigen Worten: Mit einer Erfahrung von über vier Jahrzehnten hat VERTEX sich als größter Hersteller für Maschinenteile in Taiwan einen Namen gemacht. Seit der Gründung im Jahr 1978 hat das Unternehmen kontinuierlich in seine Produktionskapazitäten investiert und verfügt nun über eine beeindruckende Fläche von mehr als 15000 m². VERTEX ist stolz darauf, sich auf Forschung und Entwicklung zu konzentrieren, um innovative Designs zu schaffen, die den steigenden Anforderungen der Branche gerecht werden. Darüber hinaus ist VERTEX dafür bekannt, dass 98% aller Artikel sofort ab Lager verfügbar sind. Diese hohe Lagerverfügbarkeit ermöglicht es den Kunden, ihre Produktionsausfallzeiten zu minimieren und ihre Maschinen reibungslos zu betreiben. VERTEX bleibt seiner Mission treu, qualitativ hochwertige Maschinenteile herzustellen und den Kunden einen erstklassigen Service zu bieten.
Flansch A Accessory for Precision Slot Head, 11 kg - Vertex
Take advantage of a secure Flange A interface and robust mass for improved machining stability; the accessory ensures precise mounting for slitting operations and supports steady tool performance. Order the flange directly via Metav Werkzeuge or consult our product advisors for compatibility details. VSH-FGA Flange A — Accessory for Precision Slitting Head (Vertex) The VSH-FGA is an accessory designed to provide a secure flange connection for precision slitting heads, enabling consistent alignment and stable operation in machining environments *Secure flange interface for precision heads *Compatible with Vertex equipment families *Robust construction for vibration damping *Standardised Flange A mounting for easy integration Stable mounting that reduces runout and improves cut quality A correctly executed flange connection is fundamental for precise slitting tasks. The Flange A interface supplied with this accessory creates a repeatable mounting interface that helps preserve concentricity and minimise runout, which in turn reduces edge deviation and improves part tolerance. The accessory’s mass contributes to stability during cutting cycles; at 11 kg, the component provides noticeable damping of minor vibrations without the need for additional balancing measures. For workshops and production lines focused on repeatable accuracy, this results in fewer rejected parts and a steadier machining process. Faster setup and simpler integration into existing spindles The accessory is designed to match industry-standard mounting practices for precision tooling, making mechanical alignment and seating straightforward. The standardised Flange A format reduces the number of adjustments required during changeovers and lowers the risk of misalignment when swapping heads or fixtures. Clear mechanical references speed up fixture checks and maintenance routines, translating to shorter downtimes and a more efficient throughput. For teams that value predictable setup times, the flange offers a pragmatic way to maintain spindle tolerances during frequent tool changes. Durable design and reliable sourcing for continuous production Built as an accessory for high-precision applications, the component reflects Vertex’s manufacturing focus and is intended to perform reliably under regular use. The design emphasises a solid interface and repeatable mechanical properties rather than cosmetic features, supporting sustained operation across production shifts. Procuring this accessory through Metav ensures access to a quality filter for the European market and benefits from a supplier that specialises in precision products for workshops and industry. The combination of solid engineering and dependable supply management helps production planners maintain consistent output with less administrative overhead. Contact Metav Werkzeuge in Emmerich to confirm fitment and secure supply of the VSH-FGA flange from Vertex — our consultants can advise on integration and delivery options Technical data Article number: VSH-FGA GTIN: 4061905095269 Manufacturer: Vertex Facts Weight: 11 kg Eclass: 21040713 Special features Intended application: accessory for precision slitting head Type: Flange A SKU: VSH-FGA Brand: Vertex FAQ Which machines is this flange compatible with? The flange is intended for precision slitting heads that use a Flange A interface and is supplied as the VSH-FGA accessory by Vertex for compatible setups. How does the flange affect machining accuracy? By providing a repeatable mounting interface, the VSH-FGA reduces mechanical runout and helps maintain concentricity, which supports tighter part tolerances and improved cut quality. What is the weight of the accessory and why does it matter? The VSH-FGA weighs 11 kg; this mass contributes to vibration damping at the interface, aiding stability during cutting operations. Is material information specified for the flange? No specific material data is listed for the VSH-FGA in the product specification; selection should be based on the required mechanical and thermal properties for the intended application. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
Flansch nach DIN 6331
Technische Daten: Bezeichnung: Flansch Vollhartmetall Durchmesser: 19 mm bis 34 mm Gewicht: 0,015 kg bis 0,09 kg Gewinde: M10x1,5mm bis M8x1,25mm Höhe: 13mm - 27mm Die technischen Daten beziehen sich auf alle Varianten und können je nach Ausführung variieren. Das ist der Hersteller in einigen Worten: VERTEX ist seit 1978 der führende Hersteller für Maschinenteile in Taiwan. Mit einer beeindruckenden Produktionsfläche von über 15000 m² hat VERTEX die Kapazität, große Mengen hochwertiger Maschinenteile herzustellen, um den steigenden Anforderungen der Kunden gerecht zu werden. Durch einen starken Fokus auf Forschung und Entwicklung ist VERTEX bekannt für seine innovativen Designs, die die Leistung und Effizienz von Maschinen steigern. Die hohe Lagerverfügbarkeit von 98% aller Artikel ermöglicht es den Kunden, schnell und unkompliziert auf ihre Bedürfnisse zu reagieren. VERTEX legt großen Wert auf Qualität und Kundenzufriedenheit und ist bestrebt, die individuellen Anforderungen der Kunden zu erfüllen. Als vertrauenswürdiger Hersteller ist VERTEX stets bereit, seinen Kunden hochwertige Maschinenteile anzubieten und einen herausragenden Service zu gewährleisten.
for Drill Chuck 11015 Key 13XHSP - Vertex
Take advantage of the proven compatibility with the drill chuck 11015 and the precision engagement that ensures reliable tightening; combine compact handling with consistent performance and order the chuck key directly via Metav Werkzeuge or consult our advisers for tailored guidance. Chuck key for drill chuck 11015 – Vertex 13XHSP compatible A compact chuck key for drill chuck 11015 designed for secure tightening and quick adjustments in workshop environments. Compatible with drill chuck 11015 Precision engagement for secure tightening Compact key for workshop environments Fast, reliable compatibility for workshop chucks The chuck key is engineered for direct compatibility with the drill chuck 11015, providing precise meshing between key and chuck to reduce slippage during tightening and loosening operations. This precise interface translates into repeatable clamping force and fewer re-adjustments, which supports a more efficient workflow in both repair and production settings. The design focuses on dependable engagement rather than decorative elements, so the practical result is less downtime and fewer interruptions to machining tasks. Consistent torque transfer to protect tooling By concentrating on accurate engagement geometry, the tool delivers consistent torque transfer when operating the chuck. Consistent torque reduces the risk of loose fittings and minimises wear on both chuck and tool holders. For workshops that prioritise process reliability, this means fewer tool changes caused by slippage and a lower incidence of surface damage to workpieces. The result is measurable time savings and a steadier production cadence. Compact handling that speeds up changeovers The compact format allows for easy stowage at the bench or in tool trolleys, making it convenient during fast-paced changeovers. The straightforward operation shortens the time needed to switch drill bits, which benefits maintenance teams and small fabrication shops alike. With clearly defined engagement points, the key supports confident, single-handed operation where appropriate, so adjustments can be completed swiftly without compromising safety. Built for everyday practicality in workshops The accessory is suited to routine workshop use where robustness and simplicity are priorities. As an accessory branded by Vertex, it complements existing Vertex chucks and tooling systems, ensuring a cohesive fit within established setups. For procurement managers seeking reliable spares or additions to a toolroom, the device offers a pragmatic choice that aligns with industrial standards and everyday operational needs. For secure chuck operation and a trustworthy spare, request the Vertex chuck key via Metav Werkzeuge — contact our experts at info@metav-werkzeuge.com or call +49 2822 7131930 for specific advice and fast supply Technical data Article number: 11031 SKU: 11031 GTIN: 4061905084867 Type: 13XHSP Brand: Vertex Intended for: drill chuck 11015 Core data GTIN 4061905084867 SKU 11031 Type 13XHSP eClass 21029201 Special features Compatibility: drill chuck 11015 Category: Vertex Product family: chuck accessories FAQ What chuck does this key fit? The chuck key fits the drill chuck 11015 and is specified for use with Vertex chuck assemblies. Is the key suitable for frequent workshop use? Yes, the Vertex chuck key for drill chuck 11015 is designed for routine workshop operation and consistent engagement over repeated use. Can the key be used with other chuck models? Compatibility is specified for drill chuck 11015; use with other models is not guaranteed and should be verified against chuck dimensions. How can Metav Werkzeuge assist with ordering or technical questions? Metav Werkzeuge can provide ordering support and technical guidance for the Vertex chuck key (SKU 11031) via the contact details provided in the product information. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
for Drill Chuck 11015 Key 16XHSP - Vertex
Reliable compatibility with drill chuck 11015 and precise engagement ensure secure clamping and reduced machine downtime; order this spare key through Metav Werkzeuge or consult the technical advisors if additional specifications are required. Spare key for drill chuck 11015 – Vertex chuck key for secure tightening A spare key for drill chuck 11015 intended to tighten and release compatible power-tool chucks, suitable as a direct replacement part for workshop maintenance. Compatible with drill chuck 11015 Precise engagement for secure clamping Compact spare part for workshop use Minimise interruptions with assured compatibility The replacement part is specified for use with the marked chuck type, providing a reliable compatibility match that restores full function without adjustment. As a dedicated chuck key, it engages the chuck pinion to transmit the necessary torque for tightening or releasing drill bits, reducing the risk of slippage during operation. This practical specification supports continuous production and straightforward tool replacement, aligning with common workshop maintenance routines. Simple spare that keeps workflows moving Keeping a dedicated spare key to hand reduces downtime when the original tool is misplaced or worn. The item is designed as a direct substitute for the original engagement mechanism, enabling fast exchange and immediate resumption of work. For maintenance planners and procurement, stocking this compact replacement offers a low-complexity solution that preserves machine availability and streamlines small-parts logistics in professional environments. Match to original standards for dependable operation Manufactured to fit the original chuck geometry, the key provides consistent engagement across repeated use and helps maintain safe, repeatable clamping results. The part number and identification data are available for inventory control, making it simple to integrate into parts lists and maintenance schedules. For operations that require traceability, the clear SKU and GTIN values support efficient procurement and asset management. Contact Metav Werkzeuge for availability and specification confirmation of Vertex spare keys compatible with drill chuck 11015 (SKU 11032) Technical Data Article number: 11032 Product designation: Spare key for drill chuck 11015 Brand: Vertex Facts GTIN: 4061905095849 Type: 16XHSP ECLASS: 21029201 Special features Compatible with drill chuck 11015 Direct replacement part for original chuck key Image asset available for reference FAQ Is this key compatible with other chuck models? Compatibility is specified for the spare key for drill chuck 11015; cross-compatibility with other models should be verified against chuck pinion dimensions. What identification numbers are provided for procurement? The Vertex spare key is listed under SKU 11032 with GTIN 4061905095849 and type 16XHSP for ordering and inventory. Can this key be used on both handheld drills and drill presses? The key engages the chuck pinion and can be used wherever the chuck with the matching interface is fitted, subject to the chuck being the compatible 11015 type. Is this an original Vertex part? The item is supplied as a Vertex-compatible spare and is identified by SKU 11032 for clear reference in maintenance documentation. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
For Drill Chuck Key For 11015 Keyless Chuck Adjustment - Vertex
Take advantage of the precise fit with the 11015 drill chuck and the clear identification as an original Vertex part to ensure consistent, reliable tightening in workshop routines. Order the part directly via Metav Werkzeuge or consult the team for procurement advice. Vertex chuck key 11033 — chuck key for drill chuck 11015 (type 8XHSP) A Vertex chuck key 11033 for secure manual tightening of drill chucks, intended to match the 11015 model and its 8XHSP specification. Precise fit for 11015 chuck Matches type 8XHSP specification Original Vertex spare part SKU 11033 Precise engagement reduces downtime and improves safety A correctly matched chuck key turns routine tightening into a measurable improvement in workshop reliability. The key's purpose is to provide a controlled mechanical interface with the chuck teeth, ensuring precise engagement and steady torque during manual clamping. For operations where slippage compromises tool life or part quality, a matching key reduces the risk of loose chucks and unplanned stops, contributing to smoother production sequences and fewer rework cycles. Clear compatibility for streamlined procurement Knowing exactly which spare to order avoids costly delays. The item is specified for use with the 11015 drill chuck and identified as type 8XHSP, simplifying inventory decisions and replacement planning. As an original Vertex part with SKU 11033, it supports consistent part traceability and helps maintain a uniform toolset across multiple machines. This clarity assists purchasing teams in keeping spares aligned with machine fleets and reduces administrative overhead. Practical benefits for everyday workshop use In daily operation, the right chuck key supports efficient tool changes and predictable clamping performance. Designed as a dedicated accessory for the matching chuck model, the tool contributes to repeatable set‑ups and decreases the time spent checking clamping integrity. Where precision and repeatability matter, using the specified key helps preserve spindle and chuck condition and supports overall process reliability. For original Vertex parts such as SKU 11033, contact Metav Werkzeuge in Emmerich for reliable supply and tailored advice — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: 11033 GTIN: 4061905096112 Type: 8XHSP Designation: Chuck key for drill chuck 11015 Manufacturer: Vertex Core data eClass: 21029201 Special features Compatible with drill chuck 11015 Original Vertex spare part FAQ Is this key compatible with my 11015 drill chuck? Yes. The Vertex chuck key 11033 is specified for use with the 11015 drill chuck and is designed to match the chuck geometry for reliable engagement. Is this an original Vertex part? Yes. This is an original Vertex spare part, listed as SKU 11033 and intended to maintain compatibility with Vertex chucks bearing the 11015 designation. What does the type 8XHSP indicate? The designation 8XHSP identifies the type family and mechanical fit; the key is manufactured to correspond with that specification to ensure correct interaction with the chuck teeth. Can the key be used for routine maintenance checks? Yes. The key is suitable as the dedicated tool for manual tightening and routine clamp checks on the compatible drill chuck, supporting repeatable set‑ups and workshop workflows. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
Freiwinkel Drehscheibe, Aufspannwinkel
Technische Daten: Bezeichnung: Aufspannwinkel VHM Durchmesser: 140 mm bis 140 mm Genauigkeit: 0,01 mm Gewicht: 16 kg bis 17 kg Max. Belastung: 15 Kg Höhe: 203mm Die technischen Daten beziehen sich auf alle Varianten und können je nach Ausführung variieren. Der Hersteller: Vertex VERTEX, der größte Hersteller für Maschinenteile in Taiwan, hat seit seiner Gründung im Jahr 1978 eine führende Position in der Branche eingenommen. Mit einer beeindruckenden Produktionsfläche von über 15000 m² verfügt VERTEX über die Kapazität, große Mengen hochwertiger Maschinenteile herzustellen und den steigenden Anforderungen der Kunden gerecht zu werden. Durch kontinuierliche Investitionen in Forschung und Entwicklung bleibt VERTEX innovativ und bietet innovative Designs an. Darüber hinaus zeichnet sich VERTEX durch eine beeindruckende Lagerverfügbarkeit aus, da 98% aller Artikel sofort verfügbar sind. Als vertrauenswürdiger Hersteller mit einem Fokus auf Qualität und Kundenzufriedenheit ist VERTEX bereit, die individuellen Anforderungen der Kunden zu erfüllen und ihnen hochwertige Maschinenteile zu liefern.
Frässchraubstock
Mechanische Schraubstöcke Der Vertex Frässchraubstock ist ein unverzichtbares Werkzeug in jeder Werkstatt, dank seiner robusten Konstruktion und seines kompakten Designs. Die kompakte Bauweise sorgt dafür, dass der Schraubstock nicht mit der Montagemaschine kollidiert. Der Kniehebelmechanismus sorgt für eine gleichmäßige Spannkraft, geschützt vor Stößen und Vibrationen. Die einfache und schnelle Montage durch das Quick-Set-Up-Verfahren spart viel Zeit.Die robuste Konstruktion aus hochwertigen Materialien gewährleistet, dass der Schraubstock weder verbiegt noch verrutscht. Technische Daten: Bezeichnung: Frässchraubstock Vollhartmetall Material: Gusseisen Genauigkeit: 0,01 mm Abmessung: 304x604x198mm - 508x902x245mm Gewicht: 84 kg - 200 kg Klemmkraft: 1000 kgf - 800 kgf Öffnung: 0-290 mm bis 0-505 mm Typ: Mechanisch Die technischen Daten beziehen sich auf alle Varianten und können je nach Ausführung variieren. Vertex, der Hersteller in einigen Worten: VERTEX ist seit 1978 der führende Hersteller für Maschinenteile in Taiwan. Mit einer beeindruckenden Produktionsfläche von über 15000 m² hat VERTEX die Kapazität, große Mengen hochwertiger Maschinenteile herzustellen, um den steigenden Anforderungen der Kunden gerecht zu werden. Durch einen starken Fokus auf Forschung und Entwicklung ist VERTEX bekannt für seine innovativen Designs, die die Leistung und Effizienz von Maschinen steigern. Die hohe Lagerverfügbarkeit von 98% aller Artikel ermöglicht es den Kunden, schnell und unkompliziert auf ihre Bedürfnisse zu reagieren. VERTEX legt großen Wert auf Qualität und Kundenzufriedenheit und ist bestrebt, die individuellen Anforderungen der Kunden zu erfüllen. Als vertrauenswürdiger Hersteller ist VERTEX stets bereit, seinen Kunden hochwertige Maschinenteile anzubieten und einen herausragenden Service zu gewährleisten.
Frässchraubstock
Mechanische Schraubstöcke Der Vertex Frässchraubstock ist ein unverzichtbares Werkzeug in jeder Werkstatt, dank seiner robusten Konstruktion und seines kompakten Designs. Die kompakte Bauweise sorgt dafür, dass der Schraubstock nicht mit der Montagemaschine kollidiert. Der Kniehebelmechanismus sorgt für eine gleichmäßige Spannkraft, die vor Stößen und Vibrationen geschützt ist. Das Quick-Set-Up-Verfahren ermöglicht es viel Zeit zu sparen dank einer einfachen und schnellen Montage.Die robuste Konstruktion aus hochwertigen Materialien verhindert ein Verbiegen oder Verrutschen des Schraubstocks. Technische Daten: Bezeichnung: Frässchraubstock Vollhartmetall Genauigkeit: 0,02 mm Abmessung: 310x176x113mm bis 609x350x190mm Gewicht: 10 kg - 59 kg Klemmkraft: 1000 kgf bis 900 kgf Öffnung: 0-112 mm bis 0-80 mm Typ: Mechanisch Die technischen Daten beziehen sich auf alle Varianten und können je nach Ausführung variieren. Der Hersteller: Vertex Seit der Gründung im Jahr 1978 hat sich VERTEX als eine der führenden Marken in der Branche etabliert. Mit einer beeindruckenden Produktionsfläche von über 15000 m² verfügt VERTEX über die Kapazität, große Mengen hochwertiger Maschinenteile herzustellen, um den steigenden Anforderungen der Kunden gerecht zu werden. Durch modernste Produktionsanlagen und fortschrittliche Fertigungstechnologien gewährleistet VERTEX die Herstellung präziser und langlebiger Produkte. Die Forschung und Entwicklung nimmt bei VERTEX einen hohen Stellenwert ein. Durch kontinuierliche Investitionen in innovative Technologien und Designverbesserungen bleibt VERTEX an der Spitze der Branche. Das engagierte Team von Experten bei VERTEX entwickelt ständig neue und verbesserte Designs, um die Leistung und Effizienz von Maschinen zu steigern. Ein weiterer herausragender Aspekt bei VERTEX ist die hohe Lagerverfügbarkeit. Mit einem beeindruckenden Bestand an Artikeln sind 98% aller Produkte sofort verfügbar. Dies ermöglicht es den Kunden, ihre Produktionsausfallzeiten zu minimieren und den reibungslosen Betrieb ihrer Maschinen sicherzustellen. Als stolzer Hersteller aus Taiwan steht VERTEX für höchste Qualität, Zuverlässigkeit und Kundenzufriedenheit. Die Kunden vertrauen darauf, dass VERTEX ihre Anforderungen versteht und ihnen Maschinenteile von höchster Qualität liefert, die den anspruchsvollen Standards gerecht werden. Interessenten sind herzlich eingeladen, VERTEX zu kontaktieren und mehr über die innovativen Produkte und den erstklassigen Service des Unternehmens zu erfahren. Das Team von VERTEX freut sich darauf, die individuellen Anforderungen der Kunden zu erfüllen und sie bei der Erreichung ihrer geschäftlichen Ziele zu unterstützen.
Frässchraubstock B-Typ
Mechanische Schraubstöcke Der Vertex Frässchraubstock ist ein unverzichtbares Werkzeug in jeder Werkstatt, dank seiner robusten Konstruktion und seines kompakten Designs. Die kompakte Bauweise gewährleistet, dass der Schraubstock nicht mit der Montagemaschine kollidiert.. Der Kniehebelmechanismus sorgt für eine gleichmäßige Spannkraft, geschützt vor Stößen und Vibrationen. Das Quick-Set-Up-Verfahren ermöglicht es viel Zeit zu sparen dank einer einfachen und schnellen Montage.Die robuste Konstruktion aus hochwertigen Materialien verhindert ein Verbiegen oder Verrutschen des Schraubstocks. Technische Daten: Bezeichnung: Frässchraubstock VHM Genauigkeit: 0,01 mm Abmessung: 212x305x107mm bis 317x483x143mm Gewicht: 13 kg bis 41 kg Klemmkraft: 1000 kgf bis 900 kgf Öffnung: 0-100 mm bis 0-65 mm Typ: Mechanisch Die technischen Daten beziehen sich auf alle Varianten und können je nach Ausführung variieren. Ein paar Worte über den Hersteller: Seit 1978 ist VERTEX der größte Hersteller für Maschinenteile in Taiwan. Mit einer beeindruckenden Produktionsfläche von über 15000 m² ist VERTEX in der Lage, große Mengen hochwertiger Maschinenteile herzustellen, um den Bedürfnissen der Kunden gerecht zu werden. Das Unternehmen hat sich auf Forschung und Entwicklung spezialisiert und ist stets bestrebt, innovative Designs zu entwickeln. Die hohe Lagerverfügbarkeit von 98% aller Artikel stellt sicher, dass die Kunden schnell und effizient bedient werden können. VERTEX hat sich einen hervorragenden Ruf aufgebaut, indem es qualitativ hochwertige Produkte liefert und gleichzeitig erstklassigen Kundenservice bietet. VERTEX ist der vertrauenswürdige Partner für Maschinenteile in Taiwan.
Frässchraubstock mit extra großer öffnungsweite
Mechanische Schraubstöcke Der Vertex Frässchraubstock ist ein unverzichtbares Werkzeug in jeder Werkstatt, dank seiner robusten Konstruktion und seines kompakten Designs. Die kompakte Bauweise gewährleistet, dass der Schraubstock nicht mit der Montagemaschine kollidiert.. Der Kniehebelmechanismus sorgt für eine gleichmäßige Spannkraft, geschützt vor Stößen und Vibrationen. Das Quick-Set-Up-Verfahren ermöglicht es viel Zeit zu sparen dank einer einfachen und schnellen Montage.Die robuste Konstruktion aus hochwertigen Materialien verhindert ein Verbiegen oder Verrutschen des Schraubstocks. Technische Daten: Bezeichnung: Frässchraubstock Vollhartmetall Genauigkeit: 0,02 mm Abmessung: 386x270x135mm bis 546x290x175mm Gewicht: 25 kg - 46 kg Klemmkraft: 1500 kgf Öffnung: 0-185 mm bis 0-305 mm Typ: Mechanisch Die technischen Daten beziehen sich auf alle Varianten und können je nach Ausführung variieren. Der Hersteller: Vertex Mit einer Erfahrung von über vier Jahrzehnten hat VERTEX sich als größter Hersteller für Maschinenteile in Taiwan einen Namen gemacht. Seit der Gründung im Jahr 1978 hat das Unternehmen kontinuierlich in seine Produktionskapazitäten investiert und verfügt nun über eine beeindruckende Fläche von mehr als 15000 m². VERTEX ist stolz darauf, sich auf Forschung und Entwicklung zu konzentrieren, um innovative Designs zu schaffen, die den steigenden Anforderungen der Branche gerecht werden. Darüber hinaus ist VERTEX dafür bekannt, dass 98% aller Artikel sofort ab Lager verfügbar sind. Diese hohe Lagerverfügbarkeit ermöglicht es den Kunden, ihre Produktionsausfallzeiten zu minimieren und ihre Maschinen reibungslos zu betreiben. VERTEX bleibt seiner Mission treu, qualitativ hochwertige Maschinenteile herzustellen und den Kunden einen erstklassigen Service zu bieten.
Gegenhalter Nr.6847G Gr.1 verz.AMF
für Verschlussspanner Nr. 6847 · verzinkt und passiviert · einsatzgehärtete Buchsen · Niete aus nicht rostendem Stahl Weitere technische Eigenschaften: · B: 6mm · L: 31mm · O: 6,9mm · Höhe: 29mm · H: 22,7mm · N: 40mm · K: 6mm · M: 26-30mm · C: 19mm · Länge: 31mm · D: 8mm · G: 4,5mm
Gegenhalter Nr.6847G Gr.3 verz.AMF
für Verschlussspanner Nr. 6847 · verzinkt und passiviert · einsatzgehärtete Buchsen · Niete aus nicht rostendem Stahl Weitere technische Eigenschaften: · B: 6mm · L: 40mm · O: 10,9mm · Höhe: 29mm · H: 22,7mm · N: 45mm · K: 13mm · M: 31,3-35,8mm · C: 19mm · Länge: 40mm · D: 10mm · G: 5,5mm
Gegenhalter Nr.6847G Gr.5 verz.AMF
für Verschlussspanner Nr. 6847 · verzinkt und passiviert · einsatzgehärtete Buchsen · Niete aus nicht rostendem Stahl Weitere technische Eigenschaften: · B: 12mm · L: 55mm · O: 13,8mm · Höhe: 61mm · H: 49,1mm · N: 86mm · K: 13mm · M: 56,5-64mm · C: 29mm · Länge: 55mm · D: 15mm · G: 11,2mm
Gewindestange mit Magnet
Technische Daten: Bezeichnung: Gewindestange VHM Durchmesser: 40 mm bis 50 mm Gewicht: 0,4 kg bis 1,4 kg Max. Belastung: 30 Kg Höhe: 116mm bis 87mm Die technischen Daten beziehen sich auf alle Varianten und können je nach Ausführung variieren. Vertex, der Hersteller in einigen Worten: Seit der Gründung im Jahr 1978 hat sich VERTEX als eine der führenden Marken in der Branche etabliert. Mit einer beeindruckenden Produktionsfläche von über 15000 m² verfügt VERTEX über die Kapazität, große Mengen hochwertiger Maschinenteile herzustellen, um den steigenden Anforderungen der Kunden gerecht zu werden. Durch modernste Produktionsanlagen und fortschrittliche Fertigungstechnologien gewährleistet VERTEX die Herstellung präziser und langlebiger Produkte. Die Forschung und Entwicklung nimmt bei VERTEX einen hohen Stellenwert ein. Durch kontinuierliche Investitionen in innovative Technologien und Designverbesserungen bleibt VERTEX an der Spitze der Branche. Das engagierte Team von Experten bei VERTEX entwickelt ständig neue und verbesserte Designs, um die Leistung und Effizienz von Maschinen zu steigern. Ein weiterer herausragender Aspekt bei VERTEX ist die hohe Lagerverfügbarkeit. Mit einem beeindruckenden Bestand an Artikeln sind 98% aller Produkte sofort verfügbar. Dies ermöglicht es den Kunden, ihre Produktionsausfallzeiten zu minimieren und den reibungslosen Betrieb ihrer Maschinen sicherzustellen. Als stolzer Hersteller aus Taiwan steht VERTEX für höchste Qualität, Zuverlässigkeit und Kundenzufriedenheit. Die Kunden vertrauen darauf, dass VERTEX ihre Anforderungen versteht und ihnen Maschinenteile von höchster Qualität liefert, die den anspruchsvollen Standards gerecht werden. Interessenten sind herzlich eingeladen, VERTEX zu kontaktieren und mehr über die innovativen Produkte und den erstklassigen Service des Unternehmens zu erfahren. Das Team von VERTEX freut sich darauf, die individuellen Anforderungen der Kunden zu erfüllen und sie bei der Erreichung ihrer geschäftlichen Ziele zu unterstützen.
Halogen Lamp Accessory M6x1P Threaded Mounting, J-C01 - Vertex
Combine a secure M6x1P threaded connection, a light weight of 0.4 kg and dedicated compatibility with the Halogen lamp VHL to achieve stable, vibration‑resistant illumination in demanding workshop settings; order the accessory directly via Metav Werkzeuge or consult the team for fitment advice. J-C01 accessory for Halogen lamp VHL — M6x1P thread, 0.4 kg The J-C01 is an accessory for the Halogen lamp VHL that provides a compact, metric‑threaded mounting solution for lighting assemblies and inspection stations. Secure M6x1P threaded connection Lightweight: 0.4 kg for easy handling Compatibility with Halogen lamp VHL Stable mounting that ensures consistent illumination The mounting accessory uses a standard M6x1P thread to deliver a secure mounting interface that resists loosening under vibration. By converting a generic lamp head into a fixed illumination source, the component reduces maintenance intervals and improves repeatability for inspection or assembly tasks. The metric thread specification is widely supported across fixtures, making the fitting straightforward and reducing the need for bespoke adaptors. The result is consistent illumination that supports process reliability and quality control. Compact, balanced construction that reduces strain Weighing only 0.4 kg, the unit is designed to be compact and easy to manoeuvre during installation or adjustment. The modest mass lowers the load on mounting arms and brackets, which can extend the service life of associated fixtures and reduce the likelihood of tilt or sag over time. The low weight also simplifies logistics in production environments where quick reconfiguration is required. Installation remains efficient, with limited handling effort and no requirement for heavy lifting equipment. Clear compatibility and straightforward installation guidance Designed specifically for use with the Halogen lamp VHL, the accessory supports dependable fitment where metric threaded connections are specified. Installation involves standard fastening to an M6 interface and basic torque control; this avoids over‑clamping and preserves alignment. The unit is supplied as a single SKU for traceability and inventory control, easing procurement for maintenance teams and production planners. The Vertex origin signals industry‑grade manufacturing and consistency across batches. For dedicated mounting solutions from Vertex and expert procurement support, contact Metav Werkzeuge to confirm compatibility and arrange supply or technical advice. Technical data SKU: J-C01 GTIN: 4061905092305 Manufacturer: Vertex Facts Weight: 0.4 kg Thread: M6x1P eClass: 27110390 Special features Suitable for Halogen lamp VHL Category: Accessory FAQ What thread specification does the accessory use? The accessory uses an M6x1P metric thread, as stated for the J-C01 accessory by Vertex. Is this compatible with the Halogen lamp VHL? Yes, the J-C01 accessory is specifically designed for compatibility with the Halogen lamp VHL and fits into standard M6 mounting arrangements. How much does the mounting accessory weigh and why does that matter? The unit weighs 0.4 kg; this low mass reduces strain on mounting arms and simplifies installation in production and inspection setups. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
Secure components with reliable workpiece clamps
Workpiece clamps, also known as workholding clamps or workholding devices, form the essential mechanical interface between machine and part in industrial fabrication. They keep components absolutely play-free, positionally accurate and vibration-resistant during milling, turning, drilling or grinding.
How workpiece clamps ensure process stability
A correctly specified clamping concept transfers the high cutting and feed forces of modern CNC machines into the machine table or spindle without deforming the part. The right combination of mechanical, hydraulic, pneumatic or magnetic solutions enables fast, repeatable setups and supports automated part change where required. Typical applications range from single-part turning to high-volume series milling and complex five-axis machining.
Concrete production benefits at a glance
- repeatable positioning: reduces scrap and rework
- high clamping forces: withstands aggressive cutting without part movement
- reduced set-up time: modular systems and quick-change features speed throughput
- improved surface finish: vibration damping for finer results and tighter tolerances
- flexible compatibility: vices, chucks, clamping plates and zero-point systems for diverse geometries
Why Metav's range is the practical choice
Metav combines decades of specialist know-how with a broad, handpicked range that democratises precision for workshops and industry alike. Based in Emmerich, Metav acts as a quality filter for the European market and supplies more than 250,000 products from precision metrology to complete workshop equipment. With the trust of over 48,000 customers, Metav offers a single-source approach that reduces supplier complexity and secures dependable delivery to your workbench.
Technical data
- function: mechanical interface between machine and workpiece
- primary requirements: absolute positional accuracy; vibration reduction; high clamping forces
- technologies: mechanical, hydraulic, pneumatic, magnetic
- typical components: machine vices; chucks; clamping plates; zero-point systems; pratzen; clamping jaws
- application areas: milling; turning; drilling; grinding; automated part change systems
- production benefits: reduced set-up time; enhanced process security; optimised series and single-part production
The practical summary
Workpiece clamps bring the stability and repeatability required to meet tight tolerances and excellent surface quality, making them indispensable across machining operations. Choosing the right workholding clamps and modular workholding devices is a decisive step towards higher productivity and consistent part quality.
FAQ
What types of workpiece clamps are suitable for automated machining?
Workholding clamps with quick-change modules, hydraulic actuation or magnetic systems are commonly used for automated machining. These workholding devices enable fast, repeatable part changes and integrate with zero-point systems.
How do workpiece clamps affect surface finish and tolerances?
A stable clamping concept minimises vibration and part movement; this improves surface finish and supports achieving narrow tolerances when using high-precision workpiece clamps or workholding devices.
Can the same workpiece clamps handle different part geometries?
Modular workholding clamps and adaptable clamping jaws allow flexible fixturing for varied geometries; combining vices, clamping plates and pratzen increases versatility on the shopfloor.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com