Secure and precise workholding for metalworking productivity
Workholding devices such as workpiece clamps and chuck systems provide absolute positional stability and vibration damping during milling, turning, drilling and grinding, ensuring parts remain free of play under high CNC cutting and feed forces. By transferring clamping loads into the machine table or spindle without deforming the component, a well engineered workholding solution improves machining accuracy, surface finish and process reliability while reducing set-up times. Modular systems from machine vices and chucks to zero-point systems and specialised fixtures enable fast changeovers and support both serial and single-part production, delivering consistent clamping force, repeatability and enhanced throughput.
109mm Rotary Indexing Table Horizontal/Vertical 6x14mm T-Slot, 4° Per Spindle Turn - Vertex
Combine repeatable 4° indexing with a compact footprint and robust MT‑3 mounting: the Vertex HV‑10 round indexing table delivers stable handling for small-series machining. Order the table directly via Metav Werkzeuge or consult our specialists for application advice. Vertex HV-10 Round Indexing Table — Horizontal/Vertical, 254 mm diameter HV-10 is a compact round indexing table designed for precision rotary positioning in both horizontal and vertical setups, suited to toolrooms and small production cells. 254 mm working diameter MT‑3 spindle taper 6×14 mm T‑slots for secure fixturing 90 kg horizontal / 50 kg vertical load 4° indexing per spindle revolution Reliable metrology-grade indexing for repeatable setups The rotary workpiece carrier provides precision positioning with a clear mechanical relationship between spindle rotation and angular movement: one spindle revolution equals 4° indexing, allowing predictable stepwise rotation for set-up and inspection tasks. The fine scale division of 10" on the angular reading supports accurate intermediate alignment; operators benefit from repeatable angular indexing that reduces set-up time and scrap rates. This mechanical clarity makes the unit especially valuable where predictable, reproducible orientations are needed for drilling, milling and marking operations. Compact, ready-to-install dimensions that save bench space With a working diameter of 254 mm and compact overall dimensions of 321×276×106 mm, the unit fits neatly onto smaller machine tables and fixtures without compromising accessibility. A low profile height of 109 mm keeps the centre of gravity stable, while a mass of 35.5 kg contributes to steady running and reduced vibration during cuts. The physical stability and measured mass make the rotary table suitable where compactness and rigidity are both required, for instance in toolrooms, prototyping benches or in secondary operations on milling machines. Secure clamping and versatile mounting for multiple setups The top plate includes 6×14 mm T‑slots that allow modular workholding and custom fixture attachments without elaborate adapters, enabling quick clamping of jaws, angle plates or bespoke fixtures. The spindle accepts an MT‑3 taper, a common machine-interface standard that simplifies integration with many vertical and horizontal machines. Combined with the rated capacity of 90 kg horizontal and 50 kg vertical, the unit addresses a range of component sizes while maintaining dependable support in both orientations. Practical benefits for workshop productivity and maintenance Engineered for low-maintenance service life, the rotary table’s straightforward mechanical concept offers predictable behaviour and easy troubleshooting. The simple indexing ratio and visible scale reduce the need for complex digital readouts for many repetitive tasks, accelerating cycle times and simplifying operator training. For workshops seeking an economical route to consistent angular accuracy, the device balances robust mechanical function with ease of use, supporting efficient small-batch production and precise setup operations. For reliable integration and tailored advice on using the Vertex HV‑10 in specific applications, contact Metav Werkzeuge — our Emmerich-based team will advise on setup, fixturing and delivery logistics. Technical data SKU: HV-10 GTIN: 4061905088919 Product: Round indexing table HV-10 (Horizontal/Vertical) Core specifications Diameter: 254 mm Overall dimensions: 321×276×106 mm Height: 109 mm Weight: 35.5 kg Max. load horizontal: 90 kg Max. load vertical: 50 kg T‑slot: 6×14 mm Indexing: 4° per spindle revolution Scale reading: 10" Spindle taper: MT‑3 Features & versions Orientation: Horizontal / Vertical ECLASS: 36600610 Mounting compatibility: MT‑3 taper Compact bench footprint for small workpieces FAQ What maximum load can the table support in horizontal and vertical positions? The Vertex HV‑10 supports up to 90 kg when used horizontally and 50 kg in the vertical orientation, making the HV‑10 suitable for a broad range of small to medium fixtures and workpieces. Which spindle taper is required for mounting the unit? The rotary table uses an MT‑3 spindle taper; the HV‑10 connects directly to common MT‑3 compatible machine spindles and arbor systems. How fine is the indexing and how is it read? Indexing is achieved at a ratio of 4° per spindle revolution, with an angular scale reading marked as 10" for intermediate alignment on the unit. Is the HV‑10 suitable for precise drilling and light milling tasks? Yes, the HV‑10 round indexing table from Vertex is designed for precision rotary positioning and is well suited to drilling, light milling and marking operations in toolrooms and small production runs. What fixture options are available for securing components? The top plate includes 6×14 mm T‑slots to accept standard clamps, jaws and custom fixtures, enabling versatile and repeatable fixturing for various workpiece shapes. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
109mm Synchronising Thread Cutting Holder 63mm Dia With Coolant Feed ±0.5mm Compensation - TECWERK
Benefit from precise pitch compensation, a Weldon shank built to DIN 1835 B+E and an integrated coolant supply for reliable synchronised tapping on CNC machines; these features reduce scrap and ensure consistent clamping force. Order the synchronising thread-cutting chuck directly via Metav Werkzeuge or consult our technical team for application support. Thread-cutting synchronising chuck DIN 1835 B+E – Weldon shank, coolant feed (TECWERK) Thread-cutting synchronising chuck for CNC machines, designed to compensate pitch differences and to handle right- and left-hand threads with high runout accuracy Weldon shank DIN 1835 B+E Integrated coolant supply Compensates pitch differences ±0.5 mm Suitable for right- and left-hand threads High runout accuracy and strong clamping force Maximise machining reliability with synchronised pitch compensation A synchronised tapping solution that compensates for axial mismatches delivers fewer broken taps and reduced rework. The chuck’s length compensation of ±0.5 mm absorbs pitch differences between the tap and the synchronised spindle, which directly decreases thread rejects in serial production. Built to the DIN 1835 B+E interface and fitted with a Weldon shank, the unit integrates smoothly with standard synchronised thread-cutting arrangements on CNC lathes and machining centres, maintaining consistent cycle times and predictable outcomes. Maintain coolant flow and protect cutting edges for longer tool life Continuous lubrication to the cutting zone is essential when threading high-alloy or difficult-to-machine materials. The chuck’s integrated coolant supply ensures that the tap receives a targeted coolant feed, which reduces heat build-up and prolongs tool life. With improved cooling and chip evacuation, the set-up supports higher productive rates and lower tooling costs, making the component a practical choice where process stability and tool longevity are priorities. Achieve secure clamping and precise concentricity High clamping forces are achieved by tensioning the tap collet, which includes an integrated square drive to prevent slippage during both push and pull synchronisation. The design offers high runout accuracy, which is crucial for maintaining thread concentricity and contact geometry; this in turn reduces vibration and enhances surface finish. For applications requiring repeatable accuracy, the chuck’s mechanical setup provides the robustness expected in professional workshop and production environments. Flexible use across thread directions and a broad range of sizes The chuck supports both right- and left-hand threads and covers a wide thread range from M4 to M33, making it versatile for tooling inventories that must handle varied threading tasks. The compact footprint (outer diameter 63 mm, length 109 mm) and standard interface allow straightforward retrofitting on machines equipped with synchronised thread-cutting devices, streamlining changeovers and minimising machine downtime. For reliable synchronised threading and expert procurement support contact Metav Werkzeuge in Emmerich—call +49 2822 7131930 or email info@metav-werkzeuge.com to discuss availability and suitability for specific CNC applications Technical data Article number: 2000834908NW Designation: Thread-cutting synchronising chuck DIN 1835 B+E M4–M33 Facts Outer diameter: 63 mm Shank diameter: 25 mm Length A: 109 mm Length compensation: -/+ 0.5 mm Thread range: M4–M33 Special features Weldon shank DIN 1835 B+E Integrated coolant supply Compensates pitch differences between tap and synchronised spindle For CNC machines with synchronised thread-cutting device Compensates synchronisation errors on push and pull High runout accuracy Supports right- and left-hand threads High clamping force via tensioned tap collets with integrated square FAQ What thread sizes does the chuck cover? The chuck covers threads from M4 to M33 and is designed for a broad range of standard metric thread sizes. Can the chuck handle both right- and left-hand threads? Yes, the synchronising chuck is suitable for both right- and left-hand threads, enabling flexible use across different production needs. How much axial compensation is available to correct pitch differences? The chuck provides a length compensation of ±0.5 mm, which helps to balance small pitch mismatches between the tap and the synchronised spindle. Is coolant delivery integrated into the tool holder? An integrated coolant supply is part of the design, allowing targeted lubrication to the cutting area for improved tool life and chip control. Which machine interfaces are compatible with this chuck? The chuck is built to DIN 1835 B+E with a Weldon shank and is intended for use on CNC machines equipped with synchronised thread-cutting systems. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
109mm Workpiece Driver For Calipers Ø80-Ø100mm, 0.7kg - Vertex
The compact design and clear compatibility make the VDC-100 an efficient choice for repeatable measuring routines: its 109 mm diameter and fit for Ø80–Ø100 mm calipers allow straightforward integration into inspection stations. Benefit from a lightweight, workshop-friendly component and order the VDC-100 directly via Metav Werkzeuge or consult our specialists for application advice. VDC-100 Workpiece Driver — 109 mm diameter, compatible with Ø80–Ø100 mm calipers (Vertex) VDC-100 Workpiece Driver is a precision accessory for positioning and handling workpieces in measurement setups, designed for use with medium-sized calipers in metrology and workshop environments 109 mm precision diameter Compatible with Ø80–Ø100 mm calipers Lightweight design at 0.7 kg Manufacturer Vertex, SKU VDC-100 Consistent positioning for precise measurements The VDC-100 is engineered to provide stable and repeatable positioning for measuring tasks, delivering a consistent reference when using handheld or bench calipers. Its defined 109 mm diameter reduces variability at the contact interface, which helps to maintain measurement traceability across repeated checks. Compatibility with Ø80–Ø100 mm calipers ensures that standard inspection tools can be used without modification, simplifying setup and reducing cycle time while preserving precision. Easier handling and faster workflow integration Weighing just 0.7 kg, the carrier offers a lightweight solution that is simple to manoeuvre on the bench and to include in fixture-based routines. The modest mass minimises strain during frequent adjustments and supports rapid repositioning between operations. This ergonomic advantage translates into reduced handling time and smoother process flow for small-batch inspection or repeated checks in production and maintenance contexts. Clear identification and dependable sourcing for industry use Traceability is supported by the visible SKU VDC-100 and GTIN 4061905085437, aiding inventory and procurement processes. Manufactured by Vertex, the component is part of a well-established range of metrology accessories, allowing procurement teams to integrate it into broader inspection toolsets with confidence. The combination of defined dimensions, measured weight and straightforward compatibility contributes to predictable performance in routine quality assurance. Contact Metav Werkzeuge in Emmerich for specification advice and procurement of the VDC-100 workpiece driver — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: VDC-100 GTIN: 4061905085437 Product name: Workpiece driver Facts Diameter: 109 mm Suitable for calipers: Ø80–Ø100 mm Weight: 0.7 kg ECLASS: 21029190 Special features Compatible with precision calipers Ø80–Ø100 mm Manufacturer: Vertex SKU: VDC-100 FAQ What caliper sizes does this workpiece driver accept? The VDC-100 workpiece driver is suitable for calipers with a measuring range of Ø80–Ø100 mm, enabling direct use with common precision calipers. How much does the workpiece driver weigh? The driver weighs 0.7 kg, which supports easy handling and quick repositioning in the workshop. Is the VDC-100 identifiable for procurement and inventory control? Yes, the component is supplied as SKU VDC-100 and carries GTIN 4061905085437 for clear traceability. Can the driver be used in handheld measuring stations? The VDC-100 is compatible with standard calipers and, due to its 109 mm diameter and lightweight design, integrates well into handheld and bench measuring routines. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
109x58x46mm Lamella Block With Prism Clamping, Modular Lamella Design - Vertex
Compact size and dependable mass combine to deliver secure clamping where space is limited: the VCP-3 offers a compact footprint of 109 × 58 × 46 mm and a stable weight of 1.4 kg, making it suitable for tight workshop and fixture environments. Order the unit directly via Metav Werkzeuge or contact our consultants for application advice. VCP-3 Lamella clamping block and prism — compact 109 × 58 × 46 mm, Vertex The VCP-3 lamella clamping block and prism is a compact clamping component designed for clamping technology and machining fixtures where precise positioning and reliable hold are required. Compact footprint 109 × 58 × 46 mm Stable weight 1.4 kg for secure clamping Suitable for workshop and machining use Precision clamping in a compact format A compact design delivers practical benefits in confined work spaces: the 109 × 58 × 46 mm footprint minimises occupied bench area while the 1.4 kg mass contributes to secure clamping and stable setup. This combination reduces unwanted movement during positioning and supports consistent setup results. The compact form factor also enables easier arrangement within jigs and fixtures, allowing efficient use of space without compromising fixture stability or predictability. Adaptable positioning for varied setups The lamella-style construction supports versatile positioning on cylindrical and irregular workpieces when used alongside matching prism accessories. In clamping technology contexts, this form factor simplifies alignment and reduces secondary operations, as the block can be integrated into existing fixture layouts. The design facilitates accurate contact points and helps maintain predictable datum locations, which benefits both machining and bench inspection tasks by shortening preparation time and increasing throughput. Consistent results and reduced setup time Built to support repeatable contact geometry, the unit promotes repeatability and a consistent location of the workpiece across multiple cycles. That consistency minimises measurement scatter and rework caused by repositioning. For production runs or inspection sequences that require steady reference points, the component helps sustain process reliability and contributes to efficient quality control by ensuring that the workpiece orientation remains unchanged between operations. Easy integration into workshop and inspection workflows The compact lamella block and prism is straightforward to incorporate into common workshop routines and metrology setups. Its standard size and form make it compatible with many clamping assemblies and inspection benches, allowing integration without extensive modification. Clear, compact components like this support streamlined workflows by making fixturing decisions more predictable and repeatable, which is particularly valuable in smaller shops where space and flexibility are at a premium. Choose the Vertex VCP-3 from Metav Werkzeuge for compact, reliable clamping — contact Metav Werkzeuge for guidance on integrating this component into existing fixtures and setups Technical data Article number: VCP-3 GTIN: 4061905085956 Brand: Vertex eClass: 21020803 Core data Dimensions: 109 × 58 × 46 mm Weight: 1.4 kg Special features Type: Lamella clamping block and prism Category: Vertex Image: Thumbnail available FAQ What are the exact dimensions of the clamping block? The clamping block measures 109 × 58 × 46 mm. How heavy is the unit? The unit has a weight of 1.4 kg. What applications is this component suited for? The component is intended for clamping technology and machining setups where compact, stable clamping and precise positioning are required. Is the product supplied with an image reference? Yes, an image thumbnail is available for the VCP-3 lamella clamping block and prism. Is material information provided for the component? Material is not specified in the provided product data for the VCP-3 lamella clamping block and prism Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
10mm 5C Collet High-Precision 0.02mm Runout, 87mm Length - Vertex
Take advantage of precise clamping and compact design to improve tool life and reduce setup time; the combination of 0.02 mm accuracy and a 10 mm nominal diameter supports stable machining and consistent production. Order the collet directly via Metav Werkzeuge or consult the technical team for compatibility advice. 5C-10 collet — 10 mm nominal diameter, 0.02 mm accuracy by Vertex A 5C-10 collet for precision workholding in toolrooms and CNC turning applications Precise clamping: 0.02 mm accuracy Nominal diameter 10 mm for small tools Compact length of 87 mm Lightweight at 0.21 kg for easy handling Consistent precision for higher first-pass yield The 5C-10 collet delivers 0.02 mm runout tolerance, which translates into markedly improved part accuracy and reduced scrap rates. This level of precision ensures stable cutting conditions and reliable concentricity, so single-setup operations remain consistent. By reducing spindle vibration and minimising repositioning, the collet supports higher first-pass yield and fewer tool adjustments, making it suitable where repeatability and tight tolerances are required. Space-saving design that improves process stability With a 10 mm nominal clamping diameter and a compact 87 mm length, the collet is optimised for small-diameter tooling and confined setups. The compact form factor reduces overhang and thus decreases the potential for chatter, improving surface finish and tool life. At just 0.21 kg, the component is easy to fit and replace during quick changeovers, helping to shorten machine downtime while maintaining secure workholding for medium-to-high-speed operations. Integrates into standard shop workflows and enhances throughput Manufactured by Vertex, the collet is compatible with 5C toolholders commonly found in lathes and toolroom setups, enabling straightforward integration without special adaptors. Its robust design supports continuous operation in production environments and contributes to predictable cycle times. Sourcing via Metav Werkzeuge adds the advantage of a European quality filter and reliable stock handling from Emmerich, which helps secure supply and reduces procurement complexity for industry and trade customers. Request technical advice or stock information from Metav Werkzeuge for Vertex 5C collets — assistance and availability from Emmerich, email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: 5C-10 GTIN: 4061905085383 Manufacturer: Vertex Facts Diameter: 10 mm Length: 87 mm Weight: 0.21 kg Accuracy: 0.02 mm Special features Collet type: 5C Category: Vertex Image: 5c-3-main.jpg FAQ What tolerance can be expected from this collet? The 5C-10 collet from Vertex is specified with an accuracy of 0.02 mm, providing tight concentricity for precision turning and toolholding tasks. Is the collet compatible with standard 5C chucks and holders? Yes, the 5C-10 collet fits standard 5C chucks and holders, allowing direct replacement in most toolroom and lathe setups. Which applications is the collet suited for? The Vertex 5C-10 collet is suitable for small-diameter turning, finishing passes and any application where consistent clamping and low runout are required. How should the collet be maintained to preserve accuracy? Regular cleaning of the collet and holder, plus inspection for wear, keeps the 5C-10 collet performing to its 0.02 mm specification; light lubrication of mating surfaces is recommended where applicable. Will the collet reduce tool vibration and improve surface finish? By providing secure clamping with tight concentricity, the Vertex 5C-10 collet helps to reduce vibration and can contribute to improved surface finish and longer tool life. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
10mm Clamping Screw M6 For 6mm Collet Chuck, Short Length - TECWERK
Take advantage of a compact M6 threaded fastener with a 10 mm overall length that secures cylindrical-shank tools reliably in 6 mm chucks; the combination of standard-compliant driving flat and compact dimensions supports efficient tool changes and stable machining. Order the clamping screw directly via Metav Werkzeuge or consult our specialists for application advice. Clamping screw M6 L 10 mm for 6 mm chuck – TECWERK The Clamping screw M6 L 10 mm for 6 mm chuck is a compact clamping bolt for face clamping chucks, designed to hold cylindrical-shank tools with a lateral driving flat in accordance with DIN 1835-B *Designed for face clamping chucks *Clamps cylindrical shank tools DIN 1835-B *Thread M6, length 10 mm for 6 mm chuck Secure, compact design for tight tool retention The compact fastener offers a 10 mm overall length combined with an M6 thread, delivering a secure hold for small-diameter chucks. Its short profile minimises overhang and reduces vibration risk during operations, which is essential when machining with delicate or precision tools. The built-in compatibility with 6 mm chucks and the lateral driving flat ensure positive torque transmission to cylindrical-shank cutters, translating into consistent concentricity and repeatable clamping forces even under cyclic load. Clear technical compatibility and standard conformity Engineered for face clamping chucks, the component is suitable for clamping tools with cylindrical shanks that include a lateral driving flat according to DIN 1835-B. This means the fastener is appropriate for commonly used cutting tools and holders in clamping-technology setups where standardised drive flats ensure correct orientation and secure engagement. The nominal thread M6 and the specified dimensions enable straightforward integration into existing clamping systems without additional modification, supporting fast tool swaps and predictable performance. Practical benefits for workshop efficiency and reliability By choosing this compact clamping bolt, workshops gain a durable and predictable fastening solution that supports efficient changeovers and stable machining results. The simple geometry reduces maintenance effort and inspection time, while the adherence to recognised standards reduces the risk of mismatch with tool shanks. For procurement and supply reliability, Metav Werkzeuge’s sourcing provides a consistent quality check and rapid dispatch from Emmerich, reinforcing operational continuity for industrial and craft applications. For secure and standard-compliant tool clamping select the TECWERK clamping screw for 6 mm chucks — contact Metav Werkzeuge in Emmerich for ordering and technical guidance: info@metav-werkzeuge.com, +49 2822 7131930 Technical data Article number: 2000834134NW Label: Clamping screw M6 L 10 mm for 6 mm chuck TECWERK Product type: Clamping screw Manufacturer: TECWERK Facts Length: 10 mm Thread nominal Ø: M6 Suitable for chuck Ø: 6 mm Pack unit: 1 Special features For face clamping chucks For cylindrical shank tools with lateral driving flat Complies with DIN 1835-B Compact profile for reduced overhang FAQ Is this clamping screw suitable for face clamping chucks only? This clamping screw M6 L 10 mm for 6 mm chuck is primarily designed for face clamping chucks and provides optimal performance in that application, particularly with tools featuring a lateral driving flat. Which tool shank standard does the fastener support? The fastener clamps cylindrical-shank tools with a lateral driving flat in accordance with DIN 1835-B, ensuring correct torque transmission and orientation. What are the critical dimensions to verify before ordering? Check the M6 thread, the 10 mm overall length and compatibility with a 6 mm chuck bore to confirm the part fits the intended clamping system. Can this clamping screw be used with adapters or non-standard chucks? Use with adapters is possible when thread and bore align; however, optimal performance is achieved when used with chucks and tools that meet the stated dimensions and DIN 1835-B specification. Does the SKU 2000834134NW include multiple items per pack? The SKU 2000834134NW is supplied with a pack unit of 1, suitable for targeted replacements or single-item procurement. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
10mm Clamping Screw M8 for 8mm Collet Chuck, DIN 1835-B - TECWERK
Compact, M8-threaded fastening combined with compatibility for 8 mm collet chucks ensures reliable tool retention and rapid replacement in busy workshops; this compact design supports uninterrupted production and straightforward inventory management. Order the TECWERK component via Metav Werkzeuge or consult our specialists for application advice. TECWERK Clamping screw M8 L10 mm — clamping screw for 8 mm collet chucks The Clamping screw M8 L10 mm secures tools with a cylindrical shank and lateral drive surface, intended for use in face clamping chucks and compact spindle applications. M8 threaded fastening Compact length 10 mm For 8 mm collet chucks DIN 1835-B compatible for cylindrical shanks Secure retention for compact installations The TECWERK clamping screw combines an M8 thread with a 10 mm overall length to deliver secure clamping in tight assemblies. Its short profile reduces axial projection while maintaining axial load transfer, which helps to avoid interference in confined spindle or toolholder layouts. For production environments where space and repeatability matter, the compact dimensions provide a dependable balance between accessibility and mechanical stability. Standards and compatibility explained Designed for tools with a cylindrical shank and a lateral drive surface in accordance with DIN 1835-B, this fastening element is optimised for 8 mm collet chucks and face clamping systems. Conforming to that standard ensures consistent engagement with toolholders that rely on the specified lateral slot or drive face, simplifying tool interchange and aligning with common machining tool dimensions used across industry. Production benefits and process reliability Using a dedicated clamping screw with standardised thread and length reduces setup time and inventory complexity while improving process reliability. The simple M8 interface supports quick replacement during maintenance cycles, reducing machine downtime and ensuring steady throughput. By standardising on compact fastening components, workshops can streamline procurement and minimise the risk of incorrect parts entering the toolchain. Practical application and handling notes Installation requires the correct engagement with the chuck and the matching lateral drive on the tool shank; when assembled, the component transmits axial clamping force while the lateral surface prevents rotation. The 8 mm chuck compatibility and DIN 1835-B conformity make this item suitable for general-purpose facing and finishing operations where secure radial alignment and repeatable seating are essential. For procurement and technical guidance on integrating TECWERK clamping screws into workshop setups, contact Metav Werkzeuge for specification support and ordering: info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 2000834135NW Label: Spannschraube M8 L.10mm f.Spannfutter-D.8mm TECWERK SKU: 2000834135NW Facts Thread: M8 Length: 10 mm Suitable for collet chuck Ø: 8 mm Packing unit: 1 Special features For face clamping chucks For tools with cylindrical shank and lateral drive surface (DIN 1835-B) Product type: Clamping screw Manufacturer: TECWERK FAQ What thread and length does this fastening use? The TECWERK clamping screw is supplied with an M8 thread and an overall length of 10 mm. Which chucks is the component suitable for? It is suitable for collet chucks with an 8 mm bore and for face clamping chuck arrangements. What tool shank form is required for correct engagement? Compatibility requires a cylindrical shank with a lateral drive surface in line with DIN 1835-B. Is the compact length suitable for tight spindle installations? Yes, the short 10 mm profile reduces axial projection and is intended for compact or space-constrained setups where secure clamping is still required. What is the item number for ordering? The item is listed under SKU 2000834135NW. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
10mm ER 11 Collet, Clamping Range 10mm, L 27mm, D 17mm - TECWERK
Data inconsistency detected The supplied product information contains conflicting specifications that prevent the generation of a reliable product description. In particular, the declared collet type is given as "ER 11" while the product label identifies a different series, "ER 16/426 E"; these two designations are not compatible and cannot both be correct. Although a clamping diameter of 10 mm and related dimensional values are present, the mismatch in the stated collet series creates uncertainty about compatibility with collet chucks and toolholders. No further product text has been produced to avoid distributing potentially incorrect technical guidance. Please verify and correct the original data source, confirming the exact collet series, nominal diameter and full dimensional set; once the information is consistent, a complete and accurate British English product description can be prepared. For assistance in resolving the discrepancy, contact the data provider or Metav Werkzeuge support.
10mm ER 16-GB Collet with 8mm Internal Square For Threading, 15 µm Runout - TECWERK
Take advantage of the combination of precise runout control, a dedicated internal square for tapping, and compact dimensions to maintain reliable tapping and clamping operations; order through Metav Werkzeuge or contact our consultants for tailored advice. Collet ER-GB (10 mm clamping, 8 mm internal square) – TECWERK The ER-GB collet is an ER-series tapping collet with an internal 8 mm square, designed for use in ER collet chucks according to DIN 6499 for secure tap holding and accurate machining. ER-GB design to DIN 6499 compliance Internal 8 mm square for thread tapping 10 mm clamping diameter for common tooling Runout accuracy 15 µm for consistent results Achieve consistent accuracy with low runout High-precision machining relies on minimal eccentricity between tool and spindle; the runout accuracy 15 µm specified for this collet ensures that cutting forces remain balanced and tool life is extended. Reduced runout directly improves surface finish and thread quality, which is particularly important in tapping operations and fine finishing. The result is repeatable machining performance, fewer rejects and less rework when consistent tolerances are required. Secure tapping thanks to an integrated square shank The 8 mm internal square is integrated to accept tap shanks for thread cutting without additional adaptors, increasing axial grip and reducing the risk of slippage during reversing cuts. Compliance with DIN 6499 means the geometry matches standard ER collet chucks and tapping holders, so the holder-to-tool interface remains predictable. For shops that alternate between drilling, reaming and tapping, this configuration simplifies tooling changes and reduces setup time. Compact dimensions that free up spindle space With a nominal 10 mm clamping diameter and a length of 34 mm, the collet offers a compact footprint for use in confined setups or where extended reach must be avoided. The short length helps to minimise lever arm effects and vibration, supporting stable machining even at higher spindle speeds. The compact form also aids accessibility in multi-head machines or tight fixture designs while preserving the clamping force needed for tapping applications. Interchangeability and practical advantages on the shop floor Designed for use in ER-style chucks and tapping holders, the collet enables quick replacement and standardised inventory across machines equipped for ER tooling. The combination of a dedicated internal square and standard ER fitment reduces the need for specialised adapters, translating into simpler stock management and faster changeovers. For production environments aiming to increase uptime, this component contributes to a predictable process chain and steady part quality. Choose the TECWERK ER-GB collet for reliable tapping performance and source it via Metav Werkzeuge for secure supply and expert consultation – contact info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 2000834966NW SKU: 2000834966NW Type: ER 16-GB Product type: Collet GB Core data Clamping diameter: 10 mm Runout accuracy: 15 µm Length: 34 mm Internal square: 8 mm Packaging unit: 1 Special features ER-GB design according to DIN 6499 Internal square for thread cutting applications Suitable for tapping and ER collet chucks Compact dimensions for reduced overhang FAQ What is the intended application of this collet? The ER-GB collet from TECWERK (SKU 2000834966NW) is intended primarily for tapping and thread-cutting operations where a secure internal square grip is required. Which chuck types are compatible with the collet? Compatibility is with ER-series collet chucks and tapping holders conforming to DIN 6499; the geometry of the ER-GB design ensures fitment in standard ER toolholders. How does the 15 µm runout specification affect machining results? A runout of 15 µm reduces tool vibration and concentricity errors, improving thread accuracy and surface finish when the ER-GB collet is used in tapping operations. Can the collet be used for drilling or reaming as well as tapping? The ER-GB variant is optimised for tapping due to the internal square, but it can be used for other operations where the tool shank and required clamping diameter match the collet specifications. What are the physical dimensions that determine suitability for tight setups? Key dimensions are 34 mm length and 10 mm clamping diameter; these compact measurements help in applications with limited spindle overhang. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
10mm ER 25-GB Collet With 8mm Internal Square For Thread Cutting, 15 µm Runout, 40mm Length - TECWERK
Product data inconsistent: the "typ" field specifies "ER 25-GB" while the label indicates "ER32-GB"; due to this contradiction, a reliable product description cannot be generated, as the mismatch between the provided information in the database and the physical label creates uncertainty regarding the correct product specification, which could lead to errors in inventory management, customer dissatisfaction, and potential logistical issues if the discrepancy is not resolved promptly; therefore, it is crucial to verify and update the product details to ensure accuracy and consistency across all records, as well as to maintain trust and reliability in the system for all stakeholders involved.
10mm ER Collet 46mm Length 5 µm Runout, DIN 6499-B - TECWERK
Take advantage of a precision clamping solution that combines standard compliance, tight concentricity and simplified inventory management for reliable production runs; order the collet directly via Metav Werkzeuge or consult our specialists for application advice. Collet Type ER 40/472 E – clamping Ø 10 mm (TECWERK) The ER 40/472 E collet, clamping Ø 10 mm, is a precision ER40 collet designed for secure tool clamping in ER collet chucks across milling and drilling applications. Complies with DIN 6499-B Full-length clamping for secure hold Runout and repeatability 5 µm Clamping diameter bridging: nominal minus 1.0 mm Precision that reduces rework and tool wear The collet is manufactured to the DIN 6499-B standard and delivers a runout and repeatability of 5 µm, ensuring consistent concentricity for rotating tools. This level of accuracy reduces vibration and uneven tool wear, which in turn lowers scrap rates and extends tool life. For operations where concentric accuracy directly affects surface finish and tolerance adherence, the precise behaviour of this clamping element translates into measurable productivity gains and fewer corrective machining steps. Design that speeds set-up and cuts inventory Thanks to full-length clamping, tools are gripped along their effective length and may be clamped on the lead chamfer; this improves axial support and reduces the need for intermediate shims or adapters. The collet bridges the clamping diameter by nominal minus 1.0 mm, so a single nominal size can accommodate small variations without additional parts. The compact dimensions (L: 46 mm, d: 10 mm, D: 41 mm) make the component easy to store and identify, simplifying toolroom logistics and accelerating changeovers at the machine spindle. Simple integration and practical applications The component is intended for use in ER collet chucks and mates directly with standard ER tooling systems. As an ER 40 unit, it is suited to medium-duty machining tasks where a 10 mm clamping diameter is required. The secure hold over the entire clamping length improves repeatability between setups, which benefits batch production and series work. For teams new to collet technology, the functional principle is straightforward: the tapered collet compresses uniformly when tightened in the chuck, producing a concentric grip that is both stable and repeatable. Contact Metav Werkzeuge for application-specific guidance on the TECWERK ER 40 collet and ensure fast, reliable supply from our Emmerich facility Technical data Article number: 2000832968NW Type: ER 40 Product name: Collet Type ER 40/472 E – clamping Ø 10 mm (TECWERK) Product type: ER collet Manufacturer: TECWERK Packing unit: 1 Facts Clamping diameter: 10 mm Length (L): 46 mm Inner diameter (d): 10 mm Outer diameter (D): 41 mm Runout and repeatability: 5 µm Clamping diameter bridging: nominal −1.0 mm Special features Complies with DIN 6499-B Compatible with ER collet chucks Held over entire clamping length Can be clamped on the lead chamfer No intermediate sizes required FAQ What clamping diameter does the collet support? The TECWERK ER 40 collet is specified for a 10 mm clamping diameter, with a clamping diameter bridging of nominal minus 1.0 mm. Is this collet compatible with standard ER chucks? Yes. The collet conforms to DIN 6499-B and is designed for use in ER collet chucks compatible with the ER 40 size. What accuracy can be expected from this clamping solution? The component offers a runout and repeatability of 5 µm, ensuring consistent concentricity for rotating tools and repeatable setups. Can tools be gripped on the lead chamfer with this collet? Yes. The collet is held along its full clamping length and may be used to clamp on the lead chamfer for improved axial support. What are the main dimensions to check before ordering? Key dimensions are: length 46 mm, inner diameter 10 mm, outer diameter 41 mm; refer to the article number 2000832968NW for exact matching. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
10mm ER25 Collet 34mm Length Precision Clamping, Nominal Minus 1.0mm - TECWERK
Take advantage of the combination of compact dimensions, runout 5 µm precision and full‑length tool support for consistent machining results; order the TECWERK collet via Metav Werkzeuge or consult our advisors for application guidance. TECWERK Collet ER 25/430 E — Clamping Ø 10 mm, precision ER 25 collet The TECWERK Collet ER 25/430 E is a precision clamping sleeve for ER 25 collet chucks, designed for rigid, repeatable tool holding in general workshop and light industrial applications. DIN 6499‑B standard compliance Fits ER 25 collet chucks Full‑length clamping of tools Runout and repeatability 5 µm Consistent concentricity for improved machining quality The ER25 collet is manufactured to DIN 6499‑B tolerances, which ensures the runout of 5 µm and a predictable concentricity that directly benefits surface finish and tool life. The ability to bridge small diameter deviations (clamping diameter bridging: nominal minus 1.0 mm) reduces the need for multiple intermediate sizes and shortens changeover time, providing a practical efficiency gain on production runs. This technical reliability translates into measurable process stability and less scrap in routine operations. Compact form factor that preserves rigidity and balance With a length of 34 mm, internal diameter 10 mm and external diameter 26 mm, the collet minimises tool overhang and helps maintain spindle stiffness. The short overall length contributes to reduced vibration and better balance at higher spindle speeds, while the design that holds tools over the whole clamping length improves axial support. These dimensional characteristics combine to offer both stable cutting conditions and straightforward handling during tool changes, supporting consistent cycle times and surface quality. Practical compatibility and dependable supply chain Designed specifically for ER 25 systems, the clamping sleeve requires no intermediate sizes and can be seated on the pilot chamfer for secure engagement. The practicality of a single‑piece supply (packaging unit 1) suits small workshop replenishment and controlled inventory management. Backing from Metav Werkzeuge provides a dependable procurement route: Metav’s European stock and quality screening aim to make high‑precision metrology and clamping solutions accessible, supported by a broad product range and long‑term market trust. Contact Metav Werkzeuge for tailored clamping advice and reliable supply of TECWERK ER 25 collets — +49 2822 7131930, info@metav-werkzeuge.com Technical Data Article number: 2000832931NW Type: ER 25 Product label: Spannzange Typ ER 25/430 E Spann‑D.10mm TECWERK Facts Clamping diameter: 10 mm Length L: 34 mm External diameter D: 26 mm Runout / repeatability: 5 µm Clamping diameter bridging: nominal −1.0 mm Packaging unit: 1 Special features Standard: DIN 6499‑B Suitable for ER collet chucks Tools held over full clamping length Can be clamped on the pilot chamfer No intermediate sizes required FAQ What tolerance can be expected for concentricity with this collet? The TECWERK ER 25/430 E collet is specified with a runout of 5 µm, delivering reliable concentricity for demanding tooling setups. Is this collet compatible with standard ER 25 chucks? Yes, the clamping sleeve is designed to fit ER 25 collet chucks and conforms to DIN 6499‑B dimensions for interchangeability. How much diameter variation can the collet bridge when clamping? The clamping diameter bridging is nominal minus 1.0 mm, allowing secure clamping of tools marginally undersize to the nominal diameter. Can tools be clamped on the pilot chamfer with this collet? Yes, the design permits clamping on the pilot chamfer, and tools are held along the full clamping length to enhance axial stability. What are the main dimensions to check for spindle integration? Key dimensions are length 34 mm, internal clamping diameter 10 mm and external diameter 26 mm; these ensure correct fit and minimal overhang. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund
10mm ER32 Collet 40mm Length Clamping Diameter 5µm Runout Nennmaß Minus 1.0mm - TECWERK
Benefit from precise toolholding and consistent runout control: the ER 32 collet delivers 5 µm repeatability and full‑length tool support for reliable machining. Its DIN‑compliant design and 10 mm nominal clamping diameter simplify setup and reduce downtime. Order the collet via Metav Werkzeuge or consult Metav specialists for technical guidance. ER 32 Collet Type 470 E – 10 mm Clamping Diameter (TECWERK) A ER 32 Collet Type 470 E for accurate tool clamping in ER collet chucks, engineered for a 10 mm nominal tool shank DIN 6499-B compliant Full-length tool support Runout and repeatability 5 µm 10 mm nominal clamping diameter Superior precision for consistent machining The collet offers tight runout and repeatability (5 µm), which translates into steadier spindle loads, improved surface finish and extended tool life. High concentricity reduces vibration and the risk of rework, making the component suitable for precision operations where tolerances matter. The combination of precision and stable clamping supports predictable cycle times and helps maintain production quality. Designed for quick set-up and broad compatibility Compliance with DIN 6499‑B ensures compatibility with standard ER collet chucks, eliminating uncertainty during selection and allowing straightforward integration into existing toolholding systems. The design permits clamping on the guide chamfer and holds tools along the full clamping length, so intermediate adapters are generally unnecessary. This reduces set‑up steps and contributes to faster changeovers in busy workshops. Flexible clamping with reliable size bridging A built‑in clamping‑range bridging of nominal −1.0 mm provides practical flexibility when minor shank deviations occur; for a 10 mm nominal collet, effective bridging permits secure clamping down to 9.0 mm. The secure grip across the tool shank prevents slippage and maintains concentricity under load, which is especially useful for short‑run production or mixed batches where exact shank dimensions vary slightly. Robust workflow and low‑maintenance use With a compact length of 40 mm and an outer diameter of 33 mm, the collet balances rigidity and accessibility in confined setups. The simple geometry and standard compliance support easy inspection and replacement when required, reducing downtime for maintenance. Trustworthy component behaviour contributes to a smoother production flow and fewer interruptions in the machining process. For reliable ER 32 toolholding choose the TECWERK ER 32 Collet Type 470 E and contact Metav Werkzeuge in Emmerich for ordering and technical advice at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 2000832946NW Type: ER 32 collet Product description: ER collet Type 470 E, 10 mm clamping diameter Packaging unit: 1 piece Core measurements Clamping diameter: 10 mm Length (L): 40 mm Shank diameter (d): 10 mm Outer diameter (D): 33 mm Runout / repeatability: 5 µm Clamping-range bridging: nominal −1.0 mm Special features DIN 6499-B compliant Fits ER collet chucks Tools held along full clamping length Can be clamped on guide chamfer FAQ What runout tolerance can be expected with this collet? The TECWERK ER 32 Collet Type 470 E (SKU 2000832946NW) delivers a runout and repeatability of approximately 5 µm, ensuring high concentricity for precision machining. Is this collet compatible with standard ER 32 chucks? Yes, the collet is DIN 6499‑B compliant and designed to fit ER 32 collet chucks for straightforward integration. Can the collet be clamped on the guide chamfer? The collet permits clamping on the guide chamfer and holds tools along the full clamping length for secure fixation. What size variations can the collet bridge? The clamping‑range bridging is nominal −1.0 mm; for the 10 mm nominal collet this corresponds to secure clamping down to 9.0 mm. What are the main dimensions of this collet? The ER 32 Collet Type 470 E (2000832946NW) has L = 40 mm, d = 10 mm and D = 33 mm, providing a compact yet rigid form factor. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund
10mm Magnetic Rod Gripper D6 Smooth 2N Holding Force, Up to 450 °C - TECWERK
Compact and thermally stable magnetic holding with a 6 mm diameter and 2 N holding force enables secure retention in confined assemblies and high-temperature processes; order or request specification advice directly via Metav Werkzeuge. Magnetic rod gripper D6×H10 smooth — AlNiCo 500, 2 N holding force (TECWERK) A Magnetic rod gripper D6×H10 smooth designed for compact, high-temperature holding and precise fitting in fixtures and jigs Compact 6 mm diameter for tight spaces Stable AlNiCo 500 magnet material High-temperature capability up to 450 °C Precise h6 tolerance, dimension h: 2 mm Space‑saving hold with reliable thermal stability The compact design of the Magnetic rod gripper D6×H10 smooth offers a small footprint while delivering a 2 N holding force suitable for light retention tasks in assembly and fixturing. A 6 mm diameter and 10 mm height allow integration into tight pockets and multi-point clamps where minimal added mass is essential. Because the core material is AlNiCo 500, magnetic performance is retained under elevated temperatures, making the component applicable to processes that expose parts to heat without frequent demagnetisation. Consistent positioning through defined fit and finish Repeatable seating is provided by a defined dimension h: 2 mm together with a h6 tolerance, which ensures consistent axial location in mating bores or locating holes. This tolerance-driven fit reduces alignment variation and decreases setup time in serial production. The smooth finish minimises surface abrasion against mating parts and supports predictable contact behaviour; handling is eased and dressing or additional surface treatment is generally unnecessary. Metav’s specification team can be consulted for integration guidance. Robust material choice for long service in demanding processes Material selection emphasises endurance: AlNiCo 500 maintains useful magnetic properties to up to 450 °C, enabling use in brazing fixtures, heat-treatment stations and other high-temperature environments. The smooth execution limits particulate accumulation and is straightforward to clean during routine maintenance. Supplied as a single unit for trial fitting, the component is intended for applications that require modest magnetic retention combined with thermal resilience and compact geometry. For TECWERK magnetic gripper requirements and fast processing from Metav Werkzeuge, contact Metav Werkzeuge at +49 2822 7131930 or info@metav-werkzeuge.com for precise ordering and technical advice Technical data Article number: 4000832250NW Label: Magnetstabgreifer D6xH10mm glatt Haftkraft 2N Manufacturer: TECWERK Product type: Magnetic rod gripper Packaging unit: 1 Facts Diameter: 6 mm Height: 10 mm Holding force max: 2 N Temperature range: up to 450 °C Fit: h6; dimension h: 2 mm Special features Material: AlNiCo 500 Smooth finish Execution: smooth SKU: 4000832250NW FAQ What holding force does this magnetic rod provide? The magnetic rod gripper provides a maximum holding force of 2 N, specified for light retention tasks where modest magnetic clamping is required. Is the gripper suitable for high-temperature operations? Yes, the TECWERK magnetic rod gripper (SKU 4000832250NW) uses AlNiCo 500 and is rated for use up to 450 °C, making it suitable for elevated-temperature fixtures. How is repeatable positioning ensured? Repeatable positioning is achieved by the defined dimension h of 2 mm combined with an h6 tolerance, which ensures consistent seating in mating bores. What are the typical applications for this component? Typical uses include compact fixturing, locating aids in assemblies, brazing fixtures and heat-resistant clamping where small size and thermal stability are needed. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund
10mm Magnetic Rod Gripper Smooth H16mm Holding Force 8.5N, AlNiCo 500 - TECWERK
Robust magnetic performance combined with a compact footprint and high temperature resilience ensure dependable small-part holding in demanding production environments; the combination of AlNiCo 500 construction, 8.5 N holding force and a D10 x H16 mm profile supports precise fixture integration. Order directly via Metav Werkzeuge or request specialist advice for application-specific selection. Magnetic rod gripper D10 x H16 mm smooth, holding force 8.5 N — TECWERK magnetic gripper The Magnetic rod gripper D10 x H16 mm smooth, holding force 8.5 N is a compact magnetic holding element designed for precise positioning and secure retention of small components in assembly and fixturing tasks. AlNiCo 500 magnetic alloy Compact D10 x H16 mm smooth design Holding force 8.5 N Suitable up to 450 °C, h6 fit Secure holding with temperature resilience The small magnetic element delivers a consistent holding force of 8.5 N, making it suitable for retention and light clamping tasks in assembly and handling equipment. Constructed from AlNiCo 500, the magnet retains magnetic performance at elevated temperatures — specified up to 450 °C — which reduces the need for temperature-sensitive substitutions in processes that involve heat. The compact D10 x H16 mm footprint enables installation in tight fixture pockets and minimises interference with adjacent components, supporting efficient production flow and reduced cycle times. Repeatable seating and exact positioning A defined fit dimension h = 6 mm with h6 tolerance ensures reproducible seating in housings or dowel holes, which is essential for repeatable fixturing and automated pick-and-place sequences. The smooth finish reduces abrasion against mating parts and simplifies cleaning, while the precisely machined diameter promotes reliable alignment during assembly. These characteristics translate into fewer rejects from misalignment and lower setup time when integrating the element into jigs or custom fixtures. Reliable choice for compact fixture design The compact magnetic element is engineered for low-maintenance service life thanks to stable magnetic properties of AlNiCo 500 and a robust mechanical design. The smooth version is particularly suited to applications where contact surfaces must remain unmarred and where frequent part handling occurs. For engineers and workshop managers seeking a space-efficient magnetic holding solution, this gripper offers a predictable performance profile that eases specification decisions and supports consistent production quality. For detailed application advice on the TECWERK magnetic rod gripper or to arrange rapid supply via Metav Werkzeuge, please contact Metav Werkzeuge at +49 2822 7131930 or info@metav-werkzeuge.com for personalised assistance Technical Data Article number: 4000832252NW Product type: Magnetic rod gripper Manufacturer brand: TECWERK Material: AlNiCo 500 Finish: smooth Packaging unit: 1 Facts Diameter: 10 mm Height: 16 mm Holding force (max): 8.5 N Fit dimension h: 6 mm Fit tolerance: h6 Operating temperature: up to 450 °C Special features Compact D10 x H16 mm design Smooth execution for reduced wear High-temperature-capable magnetic alloy Precise fit for fixture integration FAQ What is the maximum operating temperature for this magnetic gripper? The magnetic gripper uses AlNiCo 500 and is specified for operation up to 450 °C, allowing use in elevated-temperature environments. Which size and fit tolerance should be prepared for installation? Prepare a seating for h = 6 mm with an h6 tolerance to ensure repeatable installation and correct alignment of the gripper. How strong is the magnetic holding force? The component provides a maximum holding force of 8.5 N, suitable for light retention and positioning of small parts in fixtures. Is this product suitable for integration into compact fixtures? Yes, the compact D10 x H16 mm profile and smooth finish make the element well suited for tight fixture pockets and applications requiring minimal interference. How can Metav Werkzeuge assist with selecting the right variant? Metav Werkzeuge can advise on suitability and supply; the TECWERK magnetic rod gripper (SKU 4000832252NW) can be specified for particular assembly needs and integrated into bespoke fixtures. TECWERK: Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
10mm Quick-Change Insert SE 8mm Square For DIN 371 M10, L3 5mm L4 35mm - TECWERK
A compact, Size 2 quick‑change insert that secures DIN 371 M10 taps and transfers torque reliably via an 8 mm square shaft; ideal for modular tap holders in busy workshops. Order the unit directly via Metav Werkzeuge or consult the Metav team for application advice and stock availability. Quick-change insert SE 10 mm x 8 mm Size 2 for DIN 371 M10 (TECWERK) A Quick-change insert SE 10 mm x 8 mm Size 2 designed to retain DIN 371 M10 thread taps in quick‑clamping systems for efficient tap changes in production and maintenance environments Quick retention for DIN 371 M10 taps Torque transmission via 8 mm square shank Size 2 insert with 10 mm bore No safety coupling for simple assemblies Consistent thread quality through secure torque transfer The insert ensures reliable torque transmission by engaging the tapping tool via an 8 mm shaft square, which reduces slippage and contributes to repeatable thread quality in series operations. By retaining DIN 371 M10 taps in the quick‑clamping mechanism, the unit minimises axial play and supports consistent thread profiles across multiple cycles. This stability lowers rework rates and boosts overall process efficiency, making it suitable for workshops and light industrial production where predictable results are essential. Faster tool changes and modular integration for shop floors Designed for quick‑change systems, the insert speeds up tool swaps and shortens non‑productive time. The quick‑clamping retention principle holds the tap securely without additional fixtures, enabling rapid replacement and straightforward setup. The modular nature of the system means different inserts are available for various shank sizes, allowing existing holders to be adapted rather than replaced. This flexibility supports lean workflows and reduces inventory complexity in maintenance and production environments. Compact design that supports everyday workshop workflows With a compact footprint and defined interface dimensions, the Size 2 insert fits neatly into standard tap holders and contributes to ergonomic handling during repetitive tasks. The absence of a safety coupling simplifies the mechanical layout for applications where a positive mechanical fail‑safe is not required, while the clear torque path via the shaft square keeps the design robust under typical tapping loads. The TECWERK unit balances straightforward mechanics with practical benefits for machinists and service engineers who prioritise uptime. For tailored guidance on integrating the TECWERK Quick‑change insert into existing tap holders, contact Metav Werkzeuge in Emmerich for stock information and technical advice at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 4000832644NW Product type: Quick-change insert SE Model: Quick-change insert SE 10 mm x 8 mm Size 2 for DIN 371 M10 Manufacturer: TECWERK Size: Size 2 Facts Diameter: 10 mm Square shank: 8 mm Packaging unit: 1 L1: 32 mm L3: 5 mm L4: 35 mm L5: 11 mm D: 48 mm D1: 31 mm Special features No safety coupling Retains thread taps via quick‑clamping device Torque transmission via shaft square Different inserts required for different shank sizes FAQ How does the insert secure DIN 371 M10 taps? The Quick‑change insert SE holds DIN 371 M10 thread taps in a quick‑clamping device, using the shaft square to ensure a secure mechanical engagement and minimise slippage. Is the insert compatible with other shank sizes? The unit is Size 2 and designed for an 8 mm square shaft; other shank sizes require the corresponding insert type to ensure proper fit and torque transfer. Does the insert include a safety coupling? This insert is supplied without a safety coupling; the design relies on positive retention and torque transfer through the shaft square for standard tapping operations. Can the insert be used in high‑volume production? Yes, the compact design and secure torque transmission make the insert suitable for repetitive workshop and light production use where rapid tool changes are required. Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund
10mm Quick-Change Insert SE 8mm Square Shank for DIN 371 M10, L3 4mm L4 21.5mm - TECWERK
Take advantage of fast, reliable tapping with a compact quick-change insert that transmits torque via an 8 mm shank square and fits DIN 371 M10 taps; the durable design and straightforward holding method keep changeovers efficient and production running smoothly. Order directly through Metav Werkzeuge or contact our consultants for application advice. Quick-change insert SE 10mm x 8mm Gr.1 for DIN 371 M10 – TECWERK The Quick-change insert SE 10mm x 8mm Gr.1 is a compact adapter for holding DIN 371 M10 taps in quick-change systems, designed to ensure consistent torque transfer and rapid tool swaps in workshop and production environments. Square shank drive 8 mm Designed for DIN 371 M10 taps Torque transmission via shank square Compact Gr.1 quick-change insert Reliable torque transfer for consistent tapping The Quick-change insert converts the drive of a quick-change holder into a secure interface for thread taps; torque transmission is effected via the shank square, which prevents slippage under standard operating loads and helps maintain thread quality. Because the insert is specified for DIN 371 M10, the mechanical fit is predictable and reproducible, reducing rejects and reworks. The absence of a separate safety coupling keeps the mechanical path direct, which can improve responsiveness during manual and machine-driven tapping operations without introducing additional backlash. Faster changeovers and predictable workflow The insert is held by the quick-clamping device of the holder, enabling rapid tool changes that reduce machine downtime and increase throughput. The design supports a streamlined setup routine: inserts for different shank sizes are available so that holders can be adapted quickly to the required tap geometry. This pragmatic approach to toolholding enhances operational efficiency and simplifies inventory management, as compatible inserts allow a single quick-change holder to cover several tap sizes when swapped as needed. Clear dimensions and compatibility for confident planning Critical dimensions are specified to aid integration: the adapter provides a 10 mm nominal diameter interface with an 8 mm square shank drive; key component lengths are L1: 18.5 mm, L3: 4 mm, L4: 21.5 mm and L5: 7 mm, while the external diameters are D: 30 mm and D1: 19 mm. These measured values support accurate fixture design and ensure the insert sits correctly in the quick-change system, so mechanical clearances and reach can be planned with confidence. The compact size of the Gr.1 insert also helps where access is limited, without compromising stability. Contact Metav Werkzeuge for tailored advice on TECWERK quick-change inserts and reliable supply from Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 4000832693NW Type: Gr.1 Product: Quick-change insert SE Brand: TECWERK Square shank: 8 mm Diameter: 10 mm Suitable for: DIN 371 M10 Packaging unit: 1 Core measurements D: 30 mm D1: 19 mm L1: 18.5 mm L3: 4 mm L4: 21.5 mm L5: 7 mm Special features without safety coupling inserts held by quick-clamping device torque transmission via shank square different shank sizes require different inserts FAQ Is this insert compatible with DIN 371 M10 taps? Yes. The Quick-change insert SE 10mm x 8mm Gr.1 is specified for use with DIN 371 M10 taps and provides the required mechanical fit for reliable tapping operations. Does the insert include a safety coupling? No. The insert is supplied without a safety coupling; torque is transmitted directly via the shank square for a compact and direct drive path. What shank size does the insert use? The adapter features an 8 mm square shank drive, which is the defined torque-transmission interface for this Gr.1 insert. Are different shank sizes available for the quick-change system? Different inserts are required for other shank sizes; the product range includes variants so that holders can be adapted to the tap and machine requirements. What is the article number for ordering and reference? The article number is 4000832693NW for the TECWERK Quick-change insert SE 10mm x 8mm Gr.1. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
10mm Quick-Change Insert SES 8mm Square For DIN 371 M10 With Adjustable Safety Clutch, L3 30.5mm - TECWERK
Take advantage of the combination of adjustable safety coupling and robust torque transmission for fewer broken taps and smoother tapping cycles; order directly via Metav Werkzeuge or consult our specialists for application-specific advice. Quick-change insert SES 10mmx8mm Gr.2 (Quick-change insert SES) – TECWERK, adjustable safety coupling, suitable for DIN 371 M10 The Quick-change insert SES 10mmx8mm Gr.2 is a compact adapter designed to accept standard tapping shanks and to protect taps through an integrated torque-limiting coupling, intended for use with DIN 371 M10 taper taps in workshop and production settings Adjustable safety coupling for torque limitation Prevents tap breakage during operation Torque transmitted via shaft square Compatible with DIN 371 M10 taps Safer tapping thanks to a torque-limiting coupling The core advantage of this quick-change adapter is its adjustable safety coupling, which limits torque to reduce the risk of fracturing taps during interrupted cuts or misfeeds. By interrupting the drive when a preset torque threshold is reached, the coupling actively prevents tap breakage, protecting both the tool and the workpiece. This functionality supports measurable productivity gains: fewer tool changes and less rework, which directly improves process reliability in small-batch and serial tapping operations. Consistent power transfer via the shaft square for reliable results Power is transmitted through the shaft square, ensuring a direct, backlash-minimised connection that maintains rotational alignment under load. The insert is specified with a square drive of 8 mm and a tap interface of 10 mm, matching the DIN 371 M10 standard for taper hand taps. This direct drive reduces slippage and promotes uniform thread quality, making the adapter a practical choice where repeatable thread geometry is required across multiple components. Compact engineering to reduce downtime and protect tooling Designed as a quick-change solution, the adapter streamlines replacement cycles and decreases machine downtime. The unit’s compact dimensions (for example, D: 50 mm; L1: 32 mm) allow simple handling in workshop environments and facilitate storage with existing tooling racks. The result is a smoother workflow: fewer interruptions, reduced risk of damage to expensive taps and improved throughput for maintenance and production teams seeking robust yet affordable tapping protection. Clear installation practice and application scope Installation consists of seating the insert in the tool holder and setting the torque threshold appropriate to the tap and material. The adapter is intended for use with DIN 371 M10 taper taps and requires matching inserts for different shank sizes where applicable. The built-in coupling is adjustable to the workpiece and thread conditions, which is particularly useful when switching between mild steel and more challenging materials. For detailed setup parameters, follow the machine and tap manufacturer guidelines to ensure safe operation. Contact Metav Werkzeuge for tailored advice on integrating this TECWERK quick-change insert into existing tapping stations or to request application-specific recommendations – eMail: info@metav-werkzeuge.com, Tel: +49 2822 7131930 Technical Data SKU: 4000832694NW Manufacturer: TECWERK Product: Quick-change insert SES Type: Gr. 2 Suitable for: DIN 371 M10 Packaging unit: 1 Numbers / Core technical data Diameter: 10 mm Square drive: 8 mm L3: 30.5 mm L4: 35 mm L5: 34 mm D: 50 mm L1: 32 mm D1: 31 mm Special features / Versions Adjustable safety coupling for torque limitation Prevents tap breakage Torque transmission via shaft square Requires different inserts for varying shank sizes FAQ What materials can be tapped with this insert? The quick-change insert is specified for use with taps to DIN 371 M10; material suitability depends on the chosen tap grade and cutting data rather than the adapter itself. How does the torque limitation work? The integrated adjustable safety coupling disengages when the preset torque is reached, protecting the tap from overload and reducing the risk of breakage when using the Quick-change insert SES 10mmx8mm Gr.2. Is the insert compatible with other shank sizes? Different inserts are required for varying shank dimensions; this SES variant fits the 8 mm square drive and is intended for DIN 371 M10 tooling. Can this adapter improve cycle time in production? By reducing tap breakage and simplifying tool changes, the adapter contributes to fewer interruptions and improved overall process uptime. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
10mm Schnellwechseleinsatz SES Vierkant 8mm für DIN 371 M10 mit Sicherheitskupplung, L1 18,5mm L3 24,5mm L4 21,5mm L5 25,5mm D 32mm.
Schnellwechseleinsatz SES 10mmx8mm Gr.1 f.DIN 371 M10 — Schnellwechseleinsatz Der Schnellwechseleinsatz SES 10mmx8mm Gr.1 f.DIN 371 M10 ist ein Austauschwerkzeug für Gewindeschneider nach DIN 371 und sorgt durch seine einstellbare Sicherheitskupplung für kontrollierte Drehmomentbegrenzung im Fertigungsprozess Einstellbare Sicherheitskupplung reduziert Bruchrisiko Drehmomentübertragung über Schaft-Vierkant 8 mm Kompatibel mit Gewindebohrern nach DIN 371 M10 Kompakte Bauform, präzise Längenmaße für sicheren Halt Effiziente Bruchvermeidung durch integrierte Kupplung Die Sicherheitskupplung ist ein zentrales Merkmal dieses Einsatzes. Durch die einstellbare Drehmomentbegrenzung erfolgen Überlastungen kontrolliert, wodurch das Risiko eines Gewindebohrerbruchs deutlich sinkt. Das Ergebnis ist weniger Maschinenstillstand und geringerer Werkzeugverschleiß, was die Prozesssicherheit in der Werkstatt erhöht Präzise Kraftübertragung über Schaft‑Vierkant Die Drehmomentübertragung erfolgt über den Schaft‑Vierkant, was eine verlustarme Kraftübertragung gewährleistet und ein sicheres Einrasten des Werkzeugs ermöglicht. Für unterschiedliche Aufnahmen sind verschiedene Einsätze erforderlich, wodurch die Flexibilität in Produktionsumgebungen mit wechselnden Schaftmaßen steigt Kompatibilität und Abmessungen für den Werkstattalltag Der Einsatz ist speziell für Gewindeschneider nach DIN 371 M10 ausgelegt und kommt mit klar definierten Maßen wie L3: 24,5 mm und D: 32 mm, die stabilen Sitz und Wiederholgenauigkeit ermöglichen. Die kompakte Bauweise erleichtert das Handling und reduziert das Risiko von Kollisionen an engen Bearbeitungsstellen Für kompetente Beratung und schnelle Lieferung empfehlen wir, sich an Metav Werkzeuge zu wenden. Bei Fragen zu Einsatzkompatibilität oder technischen Details steht das Team gern per E‑Mail an info@metav-werkzeuge.com oder telefonisch unter +49 2822 7131930 zur Verfügung. Technische Daten Technische Daten Artikelnummer: 4000832671NW Marke: TECWERK Produktart: Schnellwechseleinsatz SES Typ: Größe 1 Fakten Durchmesser: 10 mm Vierkant: 8 mm L3: 24,5 mm L4: 21,5 mm L5: 25,5 mm D: 32 mm L1: 18,5 mm D1: 19 mm Besonderheiten mit einstellbarer Sicherheitskupplung für Drehmomentbegrenzung zur Vermeidung von Gewindebohrerbruch Drehmomentübertragung erfolgt über den Schaft‑Vierkant geeignet für DIN 371 M10 für unterschiedliche Schaftmaße sind verschiedene Einsätze erforderlich Verpackungseinheit: 1 FAQ Wie verhindert der Einsatz das Brechen von Gewindebohrern? Der Schnellwechseleinsatz SES von TECWERK nutzt eine einstellbare Sicherheitskupplung, die das Drehmoment bei Überlast reduziert und so Gewindebohrerbruch vorbeugt. Die kontrollierte Abschaltung schützt Werkzeug und Werkstück. Ist der Einsatz direkt mit Gewindebohrern nach DIN 371 M10 kompatibel? Ja, der Einsatz ist für Gewindebohrer nach DIN 371 M10 ausgelegt und überträgt das Drehmoment über den Schaft‑Vierkant, was eine sichere Verbindung garantiert. Welche Schaftgröße wird benötigt, und sind Alternativen verfügbar? Dieser Einsatz überträgt das Drehmoment über einen 8 mm Vierkant. Für andere Schaftmaße sind entsprechend ausgelegte Einsätze erforderlich; TECWERK bietet Varianten für unterschiedliche Aufnahmen. Welche Maße sind für die Planung relevant? Wichtige Maße sind L3 24,5 mm, D 32 mm und L1 18,5 mm; diese Daten dienen zur Prüfung der Einbaubedingungen und zur Auswahl passender Aufnahmen. Hersteller: NORDWEST Handel AG; Robert‑Schuman‑Straße 17; 44263 Dortmund
10mm Screwstock Adapter Insert Pin Ø12mm D:37mm - AMF
Take advantage of the combination of compact dimensions and precise fit to speed up clamping setups while keeping handling simple; order the AMF attachment via Metav Werkzeuge or consult our specialists for integration advice. Screw-vice attachment No. 6440 — insertion pin Ø 12 mm, head diameter D 37 mm (AMF) A Screw-vice attachment No. 6440 engineered for reliable clamping applications where a 12 mm insertion pin and a 37 mm seating diameter ensure a stable connection in confined workshop or industrial environments Screw-vice attachment No. 6440 by AMF Insertion pin Ø 12 mm for secure fit Head diameter D 37 mm for stable seating Compact height 10 mm for tight spaces Compact design that keeps setups efficient The compact footprint of this adapter delivers a practical advantage in dense fixtures and small vices. With a compact height 10 mm and a seating diameter of D 37 mm, the component reduces the overall stack height in multi-element clamping assemblies and minimises collision risk during machining or measuring operations. The small profile supports denser workholding layouts without sacrificing contact area, which helps maintain positional stability and repeatability when frequent part changes are required. This reduces setup time and supports a smoother production flow. Fast, precise engagement for repeatable clamping A defined insertion pin Ø 12 mm provides a clear mechanical interface for pin-and-socket systems: the pin locates the attachment, the seating diameter distributes contact forces and the result is a consistent, reproducible connection. For users who perform repetitive clamping tasks, this reduces variability between jobs and simplifies alignment. The plain mechanical function requires no auxiliary systems and explains why the adapter is well suited to applications where reliability and quick changeover are priorities. Practical benefits for workshop and industrial use The design focuses on straightforward functionality and ease of handling. The large seating diameter helps distribute clamping loads across a wider area, which improves stability under lateral forces during processing. As a dedicated clamping accessory from AMF, the adapter is intended to integrate into common workshop workflows and to provide a dependable mechanical interface for fixtures that accept a 12 mm locating pin. The result is a component that supports productivity through predictable behaviour and minimal adjustment. Simple care and clear specifications for planning With its unadorned mechanical design, the attachment requires only routine inspection and cleaning to remain serviceable. The clear dimensional data — insertion pin Ø 12 mm, D 37 mm, height 10 mm — allows planners and engineers to verify fit in CAD models and on setup drawings without ambiguity. When specifying tooling or documenting fixtures, these measurable values simplify procurement and quality control. The product label and type number make traceability straightforward for stock management and reordering. For precise clamping solutions, request the AMF Screw-vice attachment No. 6440 from Metav Werkzeuge — Metav’s Emmerich warehouse ensures reliable supply and specialist advice; contact info@metav-werkzeuge.com or call +49 2822 7131930 for technical clarification and ordering. Technical data Article number: 4000833135NW Type: No. 6440 Label: Schraubbockaufsatz Nr.6440 Einsteckzapfen-D.12mm KGL AD 37mm AMF Manufacturer: AMF Dimensions & core data Height: 10 mm Insertion pin diameter: 12 mm Head diameter D: 37 mm Packaging unit: 1 Features & application Product type: Screw-vice attachment Brand: AMF Application: Locating and clamping via insertion pin Suitable for compact clamping assemblies FAQ What are the key dimensions of the attachment? The main dimensions are height 10 mm, insertion pin Ø 12 mm and head diameter D 37 mm, as specified for the AMF Screw-vice attachment No. 6440. Which locating sockets is the adapter compatible with? The adapter is intended for sockets or fixtures that accept a 12 mm locating pin; compatibility depends on the receiving element accommodating an insertion pin Ø 12 mm and the seating diameter D 37 mm. How is the component installed in a clamping setup? Installation is by insertion of the pin into the matching locating bore or socket; the seating diameter provides lateral support for a stable connection. How many pieces are supplied per packaging unit? The packaging unit is 1, corresponding to article number 4000833135NW. Is the material or coating specified for this item? The dataset does not specify material or coating for the AMF Screw-vice attachment No. 6440 Manufacturer: AMF; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
10mm Slot Bar Accessory for Precision Slitting Head, 210mm Length - Vertex
Take advantage of the combination of precision, stable mass and a compact length for reliable slitting operations; the 10 mm slot bar reduces vibration and maintains cutting geometry. Order the VSH-10C directly via Metav Werkzeuge or ask our consultants for compatibility details. VSH-10C 10 mm slot bar — accessory for precision slitting heads (Vertex) The VSH-10C is a 10 mm slot bar designed as an accessory for precision slitting heads, offering stable support and consistent positioning in small-format and industrial slitting applications. Precision 10 mm slot bar Length 210 mm for versatile setup Mass 0.81 kg for stable operation Compatible with precision slitting heads Stable geometry for consistent slitting results The 10 mm cross-section and calculated mass promote a steady centre of gravity that reduces chatter and helps maintain blade alignment during operation. Where repeatability matters, the bar’s dimensions support constant cutting geometry, which in turn improves edge quality and reduces rework. The moderate length of 210 mm is optimised for confined setups and allows straightforward integration into compact machining stations, providing a tangible improvement in process stability without extensive machine alterations. Seamless integration with precision slitting heads Designed as an accessory for precision slitting heads, the component enables fast mechanical coupling and straightforward alignment. The bar’s form factor supports common mounting schemes used in slitting assemblies and is suited to retrofit tasks where exact positioning is required. Clear mechanical compatibility reduces setup time and helps maintain productive uptime, supporting fast tooling changes and minimising process interruptions in both workshop and production-line environments. Operational reliability through mass and balance At 0.81 kg, the slot bar contributes useful inertia that damps undesired vibrations while keeping the assembly light enough for manual handling and quick adjustments. This balance between mass and manoeuvrability means fixtures remain stable during high-precision operations without compromising operator convenience during installation. The product’s design focuses on dependable, repeatable performance, ensuring the accessory assists in maintaining consistent tolerances across batches. Practical applications and workshop benefits Ideal for precision trimming, slotting and fine slitting tasks, this accessory suits toolrooms, small-series production and specialist subcontract machining where space and repeatability are priorities. The compact dimensions and stable behaviour of the component help reduce setup complexity and improve first-pass yields. Specifying a compatible slot bar as part of a slitting system provides measurable advantages in throughput and component quality for operations that demand reliable edge finishes. Contact Metav Werkzeuge for specification matching, delivery options and expert advice on integrating the VSH-10C into existing slitting assemblies — Metav’s specialists in Emmerich are available to assist with technical queries and compatibility checks Technical data Article number: VSH-10C GTIN: 4061905095252 Manufacturer: Vertex Weight: 0.81 kg Length: 210 mm Type: 10 mm slot bar ECLASS: 21040713 Facts SKU: VSH-10C Category: Vertex UID: VSH-10C Special features Accessory for precision slitting head Compact form factor for confined setups Mass optimised for vibration damping Suitable for retrofitting existing assemblies FAQ What is the primary function of the slot bar? The VSH-10C serves as an accessory for precision slitting heads, providing a 10 mm guide bar that improves alignment stability and reduces vibration during slitting operations. Which machines is the bar compatible with? The bar is intended for use with precision slitting head assemblies; compatibility depends on the head’s mounting scheme and can be confirmed against the VSH-10C dimensions and mounting interface. How does the bar affect slitting quality? By adding controlled mass and a stable mounting surface, the bar helps maintain cutting geometry, which supports cleaner edges and more consistent tolerances during repetitive cutting tasks. Is the component suitable for retrofit projects? Yes, the compact 210 mm length and standardised form factor make the item well suited to retrofitting into existing slitting setups where space is limited. What information is provided for procurement and identification? Identification data include the article number VSH-10C and GTIN 4061905095252, which can be used for ordering and stock management. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
10mm T-Slot Nut DIN 508 8mm M6, Strength Class 10 - AMF
Benefit from standardised DIN 508 compatibility, a compact 8 mm T-slot fit and secure M6 threading for consistent clamping results; order directly via Metav Werkzeuge or consult our advisors for specification support. T-Nutenstein DIN 508 T-Nut 8mm M6 AMF — compact T-slot nut for standard clamping systems T-Nutenstein DIN 508 T-Nut 8mm M6 AMF is a standard-compliant T-slot fastening element for assembly and fixturing in machine tables and modular fixtures DIN 508 standardised design Compact 8 mm T-slot fit M6 internal thread for standard bolts Strength class 10 for reliable clamping Reliable standard fit for repeatable fixturing The T-Nutenstein DIN 508 T-Nut 8mm M6 AMF delivers a standardised interface via DIN 508, guaranteeing repeatable seating in 8 mm T-slot rails. The standard conformity ensures interchangeability across fixtures and tables that follow the same norm, which simplifies procurement and reduces assembly errors. The compact height 10 mm keeps the clamping envelope low, helping to avoid collisions in multi-level assemblies while providing sufficient material for thread engagement. This combination of size and standardisation aids planners and shop-floor staff in selecting compatible components without extensive measurement checks. High clamping reliability through defined strength and geometry Designed for dependable mechanical performance, the nut is specified with a strength class 10, indicating a high tensile capability for its category. The supplied axial values (A: 7.7, E: 13, K: 6) describe the critical seating and engagement dimensions that determine how the part sits and transfers load within a T-slot. These dimensional details assist engineers in verifying clamp geometry and calculating safe load paths in fixture design. Where predictable clamping behaviour is required, such clearly defined parameters reduce calculation overhead and support safe, auditable assembly practices. Practical compatibility and straightforward ordering The part accepts standard fastenings via the M6 thread and is intended for use in conventional T-slot systems with an 8 mm slot width. Supplied as packaging unit 1 and identifiable by SKU 4000833201NW, it is suitable for replacement stock or single-item assembly needs. The compact profile and standard thread make it simple to integrate into modular clamping setups, reducing the need for bespoke adaptors. For procurement and inventory management, the clear SKU and norm reference streamline ordering and ensure components arriving at the bench match design specifications. For specification guidance, order placement or to confirm fitment within a specific clamping system, contact Metav Werkzeuge for tailored advice and swift supply from Emmerich. Technical data Article number: 4000833201NW UID: 4000833201NW Product type: T-slot nut Brand: AMF Dimensions & core data Height: 10 T-slot width: 8 Thread: M6 Standard: DIN 508 Packaging unit: 1 Special features Addition A: 7,7 Addition E: 13 Addition K: 6 Strength class: 10 FAQ What slot size does this T-slot nut fit? The nut is designed for an 8 mm T-slot and conforms to the DIN 508 specification for that slot width. Which thread size is provided on this part? This T-slot nut (AMF) features an M6 internal thread suitable for standard M6 bolts and screws. How is load capacity described for this component? Load-related capability is indicated by the strength class 10 and the axial dimensions (A: 7.7; E: 13; K: 6) which inform seating and load transfer. Can this item be used as a direct replacement in existing DIN 508 fixtures? Yes, the design follows DIN 508, making it suitable as a direct replacement where that norm is required. What is the ordering reference for this T-slot nut? Order or reference SKU 4000833201NW when requisitioning the AMF T-slot nut for procurement or stock purposes. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
10mm T-Slot Nut Nr. 510 Rhombic M8, Height 12mm - AMF
Take advantage of the M8 threaded connection, compact 12 mm height and rhombic profile for reliable fixture locating and uninterrupted production. Combine robust clamping performance with straightforward compatibility for 10 mm T-slots and order the component directly via Metav Werkzeuge or consult our advisors for specification support. T-slot nut No. 510 — 10 mm T-slot, M8 thread (AMF) T-slot nut No. 510 is a compact clamping element for securing workpieces and fixtures in 10 mm T-slots, offering a rhombic profile for positive locating in modular setups Fits 10 mm T-slots M8 internal thread Rhombic profile for positive locating High strength class 10 Secure, repeatable clamping for fixture workflows The rhombic T-slot nut provides a positive locating geometry that reduces lateral play and improves repeatability when securing clamps or tooling. With a 12 mm height and a designed fit for a 10 mm T-slot, the component delivers consistent seating in slot tracks, which minimises setup time and reduces the need for secondary alignment. This repeatability translates into fewer rejects and smoother machine operation during jigs and fixture changes. Simple integration with standard fixturing systems Compatibility with the widely used 10 mm T-slot combined with an M8 thread makes the part straightforward to incorporate into existing clamping systems and modular tables. The internal thread allows conventional bolts and studs to be used without special adapters, supporting fast assembly and disassembly. The clear mechanical interface supports efficient workflows and reduces the variety of fasteners required in the workshop. Robust performance under load and clear specification limits Specified with a strength class 10 rating and documented geometry parameters (A: 9.7; E: 15; K: 6), the nut is intended for demanding clamping applications where secure retention is essential. The rhombic form ensures torque is translated into axial holding force rather than slot damage, prolonging service life of both the nut and the slot. For shops aiming for predictable clamping behaviour, this combination of geometry and strength class supports a measurable improvement in operational reliability. For reliable fixturing choose the AMF No. 510 rhombic T-slot nut and contact Metav Werkzeuge for ordering and specification advice from Emmerich — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 4000603182NW Type: No. 510 Product: T-slot nut Manufacturer: AMF Dimensions & core data Height: 12 mm T-slot width: 10 mm Thread: M8 Packaging unit: 1 A: 9.7; E: 15; K: 6; Strength class: 10 Designs & special features Rhombic profile for positive locating Intended for fixture and clamp mounting Compact form for minimal slot intrusion FAQ What T-slot width does the nut fit? The T-slot nut is designed for a 10 mm T-slot, matching standard 10 mm slot systems for modular tables and machine beds. Which thread size is provided on the component? The part features an M8 internal thread, allowing the use of common M8 bolts and studs for clamping and assembly. What is the height of the nut and why does it matter? The nut has a 12 mm height, which limits slot intrusion while providing sufficient engagement to transfer clamping forces securely. How does the rhombic profile improve clamping? The rhombic profile offers positive locating, reducing side play and ensuring torque is converted into axial clamping force rather than lateral movement. Is the strength rating specified for heavy-duty use? The component is documented with strength class 10 and geometry values (A: 9.7; E: 15; K: 6) to indicate suitability for demanding clamping applications. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
10mm T-Slot Nut Single, M8 Threaded - Vertex
Take advantage of a compact component that delivers a secure clamping interface and straightforward compatibility with standard 10 mm profiles; combine reliable fastening, precise fit and rapid procurement via Metav Werkzeuge for uninterrupted workshop workflows. Order the part directly through Metav Werkzeuge or consult the technical team for application guidance. 3412M — Vertex T-slot nut, compatible with 10 mm profiles and M8 threading 3412M is a compact T-slot nut designed for secure fixture in 10 mm T-slots, suitable as a single supply item for machine tables and fixture systems Compatible with 10 mm T-slot profiles M8 thread for secure fastening Compact dimensions 9.7x22x6 mm Supplied as a single item Precise engagement with 10 mm profiles for dependable fixturing The T-slot design offers a consistent mechanical interface that aligns with standard 10 mm slot profiles, ensuring repeatable positioning and reduced setup time. The low-profile, compact geometry (9.7x22x6 mm) minimises interference within assemblies while providing a stable bearing surface for clamping elements. In practice, this results in fewer alignment checks during part changeovers and a more efficient workflow when integrating the nut into modular fixturing systems. Secure M8 fastening that supports reliable clamping forces Threaded engagement is provided by an M8 thread, which is widely used in workshop and industrial fixtures for its balance of strength and accessibility. The internal thread allows conventional bolts or studs to be used without additional adapters, simplifying inventory and assembly processes. As a result, clamping assemblies can be tightened to the required torque using standard tools, delivering consistent holding forces and lowering the risk of slippage under operational loads. Engineered compatibility and supply reliability through a trusted channel Manufactured by Vertex, this component is intended for integration into fixture plates, machine tables and clamping rails where a standard T-slot nut is required. Supplied individually, the item is well suited for targeted replacements or small runs where bulk packs are unnecessary. Procuring the part via Metav Werkzeuge provides access to quality-controlled stock and the specialist know-how of a precision partner, supporting seamless procurement and installation in industrial and trade environments. For application advice or compatibility checks for the Vertex 3412M T-slot nut, contact Metav Werkzeuge to request a fitment recommendation or technical clarification through their sales and consultancy channels Technical Data Article number: 3412M GTIN: 4061905084157 EClass: 21029107 Core dimensions Overall size: 9.7 x 22 x 6 mm Slot compatibility: 10 mm Thread: M8 Features & suitability Type: T-slot nut, single item supply Brand: Vertex Images: technical drawing and product detail available FAQ What slot size is this nut designed for? The item is intended for 10 mm T-slot profiles and provides a standardised interface for fixture systems. Which thread size does the nut accept? The nut features an M8 internal thread suitable for common bolts and studs used in clamping assemblies. Can this part be used as a replacement in existing fixtures? Yes, the Vertex 3412M T-slot nut is designed for straightforward replacement in compatible 10 mm profile systems. Is the product supplied individually or in sets? This entry is supplied as a single item, indicated by the single-item designation for targeted replacements. Where can technical drawings be obtained? Technical drawings and product images are available via the product listing and can be consulted before installation to confirm fitment. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
Secure components with reliable workpiece clamps
Workpiece clamps, also known as workholding clamps or workholding devices, form the essential mechanical interface between machine and part in industrial fabrication. They keep components absolutely play-free, positionally accurate and vibration-resistant during milling, turning, drilling or grinding.
How workpiece clamps ensure process stability
A correctly specified clamping concept transfers the high cutting and feed forces of modern CNC machines into the machine table or spindle without deforming the part. The right combination of mechanical, hydraulic, pneumatic or magnetic solutions enables fast, repeatable setups and supports automated part change where required. Typical applications range from single-part turning to high-volume series milling and complex five-axis machining.
Concrete production benefits at a glance
- repeatable positioning: reduces scrap and rework
- high clamping forces: withstands aggressive cutting without part movement
- reduced set-up time: modular systems and quick-change features speed throughput
- improved surface finish: vibration damping for finer results and tighter tolerances
- flexible compatibility: vices, chucks, clamping plates and zero-point systems for diverse geometries
Why Metav's range is the practical choice
Metav combines decades of specialist know-how with a broad, handpicked range that democratises precision for workshops and industry alike. Based in Emmerich, Metav acts as a quality filter for the European market and supplies more than 250,000 products from precision metrology to complete workshop equipment. With the trust of over 48,000 customers, Metav offers a single-source approach that reduces supplier complexity and secures dependable delivery to your workbench.
Technical data
- function: mechanical interface between machine and workpiece
- primary requirements: absolute positional accuracy; vibration reduction; high clamping forces
- technologies: mechanical, hydraulic, pneumatic, magnetic
- typical components: machine vices; chucks; clamping plates; zero-point systems; pratzen; clamping jaws
- application areas: milling; turning; drilling; grinding; automated part change systems
- production benefits: reduced set-up time; enhanced process security; optimised series and single-part production
The practical summary
Workpiece clamps bring the stability and repeatability required to meet tight tolerances and excellent surface quality, making them indispensable across machining operations. Choosing the right workholding clamps and modular workholding devices is a decisive step towards higher productivity and consistent part quality.
FAQ
What types of workpiece clamps are suitable for automated machining?
Workholding clamps with quick-change modules, hydraulic actuation or magnetic systems are commonly used for automated machining. These workholding devices enable fast, repeatable part changes and integrate with zero-point systems.
How do workpiece clamps affect surface finish and tolerances?
A stable clamping concept minimises vibration and part movement; this improves surface finish and supports achieving narrow tolerances when using high-precision workpiece clamps or workholding devices.
Can the same workpiece clamps handle different part geometries?
Modular workholding clamps and adaptable clamping jaws allow flexible fixturing for varied geometries; combining vices, clamping plates and pratzen increases versatility on the shopfloor.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com