Secure and precise workholding for metalworking productivity
Workholding devices such as workpiece clamps and chuck systems provide absolute positional stability and vibration damping during milling, turning, drilling and grinding, ensuring parts remain free of play under high CNC cutting and feed forces. By transferring clamping loads into the machine table or spindle without deforming the component, a well engineered workholding solution improves machining accuracy, surface finish and process reliability while reducing set-up times. Modular systems from machine vices and chucks to zero-point systems and specialised fixtures enable fast changeovers and support both serial and single-part production, delivering consistent clamping force, repeatability and enhanced throughput.
10mm-40mm Clamping Wedge For T-Slot 12mm With M12x12x100 Clamp Screw, 14mm Width - AMF
Take advantage of precise, repeatable workholding with the AMF clamping element that combines 12 mm T‑slot compatibility and an adjustable clamping height of 10–40 mm for flexible fixture setups. Order directly via Metav Werkzeuge or request advice from our consultants for integration into existing clamping systems. AMF Clamping Element No. 6314V — T‑slot 12 mm, clamping height 10–40 mm AMF Clamping Element No. 6314V is a compact workholding component engineered for secure clamping in 12 mm T‑slot systems, suitable where height adjustability and robust fixation are required. T‑slot compatibility: 12 mm Adjustable clamping height 10–40 mm Supplied with M12 x 12 x 100 clamping screw Robust design for secure workholding Faster set‑ups with standard T‑slot compatibility The clamping element is designed specifically for 12 mm T‑slot rails, enabling rapid integration into common machine tables and fixture plates. Compatibility with this widely used slot size reduces the need for adapters and minimises machine downtime. The simple geometry and standardised interface support quick positioning and reliable repeatability, making the component well suited to batch production and frequent changeovers where efficient clamping is essential. Flexible clamping range to accommodate varied stock With an adjustable clamping height of 10–40 mm, the unit covers a broad range of workpiece thicknesses without additional spacers. The height range allows a single clamping element to be used across different jobs, simplifying tool inventory and reducing setup complexity. The clear mechanical range also allows planners to calculate clamp forces and overhang safely, providing more predictable results during milling, drilling or light finishing operations. Purposeful hardware for secure fixation The delivery includes a M12 x 12 x 100 clamping screw, matched to the component’s M12 thread and overall length, which ensures correct engagement and clamping stroke. The specified 100 mm total length is suitable for typical fixture stacks while the standard M12 thread guarantees compatibility with commonly stocked fasteners. This combination of thread size and screw length enables consistent clamp preload and reduces the risk of improper assembly in production environments. Practical advantages for workshop and production environments The compact form and a width of 14 mm contribute to space‑efficient clamping arrangements, allowing closer placement of multiple clamps where workpiece support is critical. The element’s straightforward design keeps maintenance simple and inspection quick, which supports continuous operation. For technical clarifications or dimension verification when integrating into existing jigs, Metav’s product specialists can provide detailed advice and measurements to assist with planning and procurement. Contact Metav Werkzeuge today for tailored advice on integrating the AMF clamping element into existing fixture systems and for ordering details via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 4000833072NW Type: Nr. 6314V Product: Clamping element Brand: AMF Packaging unit: 1 Facts T‑slot: 12 mm Clamping height: 10–40 mm Width: 14 mm Thread: M12 Overall length: 100 mm Special features Includes clamping screw M12 x 12 x 100 Compact form for close clamp spacing Suitable for standard T‑slot fixture tables Robust design for secure workholding FAQ Which T‑slot size does the clamp fit? The clamping element is designed for a 12 mm T‑slot, matching common machine table standards. What is the adjustable clamping height range? The unit provides a clamping height of 10–40 mm, allowing use across a wide range of workpiece thicknesses. Is the clamping screw included and what are its dimensions? Yes, the delivery includes a M12 x 12 x 100 clamping screw to match the component’s thread and required engagement. What thread specification does the clamp use? The element uses an M12 thread, compatible with standard M12 fasteners. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
10pcs ER-16 Collet Set with MT-2 Collet Chuck, Precision Clamping - Vertex
Take advantage of the combination of high-precision ER-16 collets, seamless MT-2 taper compatibility and a complete workshop set for reliable toolholding and reduced setup time — order directly via Metav Werkzeuge or consult our team for tailored advice. Vertex Collet Set V-412 — ER-16 Collets with MT-2 Taper A Vertex Collet Set V-412 designed for secure toolholding in conventional milling and drilling spindles with an MT-2 taper. High-precision ER-16 collets Compatible with MT-2 taper spindles Durable build for everyday workshop use Complete set covering common diameters Consistent clamping for repeatable machining Accurate clamping is the foundation of predictable machining processes. The ER-16 system provides tight concentricity, which reduces runout and minimises rework across production batches. By securing cutting tools with consistent axial alignment, the set contributes to stable cutting conditions and longer tool life. This improves process reliability and supports higher first-pass yield in milling and drilling operations, making the setup a pragmatic choice for busy workshops and maintenance departments. Straightforward fitment with standard MT-2 spindles Integration into conventional machines is pragmatic: the chuck and taper combination is compatible with a broad range of older and modern spindle noses using an MT-2 interface. The mechanical simplicity of the taper connection enables quick installation and removal, so machine uptime is maximised and changeovers are efficient. For facilities that balance retrofit projects with routine production, this solution reduces downtime and simplifies inventory by relying on a familiar, proven spindle standard. Practical set composition for day-to-day workshop demands Supplied as a complete collet set, the package covers the diameters commonly required for general-purpose machining and maintenance tasks. The assortment reduces the need for frequent single-item purchases and keeps key toolholding options immediately available at the bench. Lightweight and compact, the set is easy to store and transport within the shop, helping technicians reach optimal clamping solutions faster and maintain a tidy workspace that supports smoother operations. Discuss the Vertex V-412 collet set with Metav Werkzeuge to ensure the configuration matches workshop requirements and to arrange fast delivery from Emmerich — contact Metav Werkzeuge for expert guidance. Technical data Article number: V-412 GTIN: 4061905083570 Brand: Vertex Product type: ER-16 collet set Facts Weight: 1.05 kg Pieces per set: 10 eClass: 21022190 Special features ER-16 collets MT-2 taper (Morse taper) Supplied as a complete collet chuck set Thumbnail and asset available (image included) FAQ What machines are compatible with this collet set? The V-412 collet set is compatible with machines featuring an MT-2 taper spindle; the ER-16 collets suit toolholders and chucks designed for that standard. Can the set be used for production and maintenance tasks? Yes, the Vertex ER-16 assortment is intended for everyday workshop use, offering reliable clamping for both production runs and maintenance activities. Does the set include the collet chuck itself? The supplied package comprises ER-16 collets together with a collet chuck featuring an MT-2 taper as described in the product details. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
10x Screw Jack Set VSJ Series Precision Screw Jacks, Kit Including VSJ-70A/150A and VSJ-1A–6A - Vertex
Take advantage of the combination of versatile set composition, compact total weight and robust mechanical design to simplify lifting and positioning tasks in the workshop. Order the set directly via Metav Werkzeuge or request tailored advice from our consultants. VSJ-A screw jack set — multi-size mechanical lifting jacks by Vertex A VSJ-A screw jack set designed for precise mechanical lifting and positioning in workshop, maintenance and assembly applications. Multi-size set for varied lifting tasks Robust mechanical design for long service life Compact total weight of 4 kg for easy handling Precision lifting through simple mechanics The set delivers controlled linear movement using a proven screw jack principle: rotary motion converts to axial movement, enabling precise adjustment under load. As a multi-size kit, it includes both larger and smaller jacks suited to different demands, allowing efficient staging of parts during assembly or alignment operations. The mechanical design prioritises repeatable movement and fine adjustability, making the ensemble suitable where exact positioning rather than rapid hoisting is required. Durable design that reduces downtime Mechanical simplicity means fewer wear points and straightforward upkeep. The components are engineered for dependable operation and can be inspected or lubricated without specialist tools, supporting low maintenance regimes and predictable workshop workflows. The set’s compact construction and combined weight of 4 kg make handling and storage uncomplicated, while the solid build supports consistent performance across repeated cycles, contributing to smoother production processes and less unexpected downtime. Practical applications and efficiency gains This screw jack assortment suits maintenance teams, small fabrication shops and equipment installers who require incremental lifting or accurate levelling rather than powered hoisting. Using a dedicated multi-size kit reduces tool swaps and preparation time, delivering a tangible efficiency benefit during repetitive tasks. Combined with Metav’s role as a quality-filtered supplier for the European market, the package supports reliable supply and uncomplicated procurement for trade and industry customers. What the set contains and how it integrates The set composition provides flexibility: 2x VSJ-70A, 2x VSJ-150A and VSJ-1A/2A/3A/4A/5A/6A offer a range of stroke lengths and capacities within one compact kit, simplifying selection for varied applications. The SKU is VSJ-A and the kit is presented as a coherent multi-jack solution that can be combined or used individually depending on the task. For compatibility or integration into existing fixtures, consult the product notes or request specific dimensions from our advisors to match workplace requirements. Contact Metav Werkzeuge for expert guidance on selecting the appropriate jack combination and arranging reliable delivery from Emmerich to your workshop Technical Data Article number: VSJ-A GTIN: 4061905094033 Brand: Vertex Facts Weight: 4 kg Pieces per set: 10 Special features Contents: 2x VSJ-70A, 2x VSJ-150A and VSJ-1A/2A/3A/4A/5A/6A Set design: multiple jack sizes included FAQ What tasks is this jack set intended for? The VSJ-A screw jack set is intended for precise mechanical lifting and positioning tasks in workshops, service and assembly work where controlled linear movement is required. Which items are included in the VSJ-A kit? The kit contains 2x VSJ-70A, 2x VSJ-150A and VSJ-1A/2A/3A/4A/5A/6A, provided as a multi-size set to cover a range of lifting and adjustment needs. Is the set suitable for high-frequency industrial use? The VSJ-A screw jack set features a robust mechanical design that supports regular use; for continuous heavy-duty cycles, consult Vertex specifications to confirm suitability for specific operating profiles. How should the screw jacks be maintained? Routine inspection and lubrication of moving parts will preserve performance in the VSJ-A set; the simple mechanical layout enables maintenance without specialist equipment. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
10x10x10" Angle Plate High-Strength Cast Steel 0.01mm Accuracy 27.7kg - Vertex
Take advantage of the combination of high-strength cast steel construction, 0.01 mm accuracy, and a stable 27.7 kg base for repeatable workholding and inspection results. Order the Vertex VR-1010 angle plate directly via Metav Werkzeuge or ask our consultants for specification support. Vertex VR-1010 Angle Plate — High-strength cast steel, 0.01 mm accuracy The VR-1010 is an angle plate designed for precise workholding and inspection tasks in metalworking and metrology, providing rigid datum surfaces for clamping, layout and measurement operations. High-strength cast steel construction Accuracy down to 0.01 mm Stable 27.7 kg base for vibration control Compact 10 x 10 x 10" footprint Engineered for dependable precision on the shop floor The angle plate delivers repeatable accuracy through finely machined datum faces and a certified 0.01 mm tolerance, making it suitable for inspection benches and precision layout work. The unit’s machined surfaces act as reliable reference planes so measurement processes remain consistent between setups. For applications where positional certainty matters, the rigid design reduces the need for repeated realignment, improving throughput and reducing rework. Robust construction that dampens vibration and maintains alignment Made from high-strength cast steel, the plate’s mass and structure provide natural damping for milling, drilling and inspection tasks. The 27.7 kg mass contributes to a stable base that resists chatter during light machining or clamping operations, helping to protect surface finishes and maintain dimensional integrity. The compact footprint minimises bench space while still offering the rigidity expected from industrial workholding equipment. Practical versatility for clamping, layout and inspection As a solid datum element, the component supports a range of workshop workflows including setup for inspection instruments, jigs and fixtures, and layout marking. The machined faces allow straightforward clamping and fixturing, while the compact, cuboid shape suits both small benchtops and larger metrology tables. Clear material choice and machining tolerances mean the plate integrates easily into quality control routines without additional modification. Contact Metav Werkzeuge for delivery from Emmerich and technical guidance on integrating the Vertex VR-1010 angle plate into production Technical Data Article number: VR-1010 GTIN: 4061905092015 Manufacturer: Vertex Facts Weight: 27.7 kg Accuracy: 0.01 mm Dimensions: 10 x 10 x 10" Special features Material: high-strength cast steel Eclass: 21170130 Category: Vertex FAQ What accuracy can be expected from this angle plate? The Vertex VR-1010 angle plate is specified to an accuracy of 0.01 mm, providing precision suitable for inspection and layout tasks. Is the plate suitable for machining setups as well as measurement? Yes, the high-strength cast steel construction of the VR-1010 offers the rigidity and damping required for light machining setups in addition to metrology applications. How heavy is the angle plate and why does that matter? The unit weighs 27.7 kg; the mass improves stability and vibration damping, which helps to maintain alignment during clamping and light machining. What are the external dimensions of the product? The plate measures 10 x 10 x 10", a compact size that fits standard benches while providing full datum faces for fixturing. Who manufactures this angle plate? The plate is manufactured by Vertex and supplied as the VR-1010 angle plate for industrial workholding and inspection. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
10x330mm Air Belt Sander Rapid Speed, 16,000 rpm - Vertex
Take advantage of a lightweight, high‑speed air tool that keeps production moving: the compact design and 10×330 mm belt deliver rapid stock removal while the 16,000 r.p.m. spindle speed shortens cycle times. Order the tool directly via Metav Werkzeuge or ask our consultants for application advice. VAG-310 — Pneumatic belt sander by Vertex, 10×330 mm belt, 16,000 r.p.m. VAG-310 is a compact air‑powered belt sander designed for fast surface preparation on both curved and flat components, suitable for workshop and industrial environments Compact pneumatic belt sander, 10x330 mm belt High speed 16,000 r.p.m. for fast material removal Lightweight construction approx. 0.8 kg Ideal for curved and flat surface sanding Accelerated material removal for efficient workflow The air‑powered design delivers a consistent power-to-weight ratio that improves throughput without adding operator fatigue. With a 16,000 r.p.m. operating speed and a 10×330 mm belt, the tool achieves a high material removal rate on common substrates while maintaining surface quality. This performance reduces time spent on roughing and significantly shortens preparation phases in assembly or repair tasks. The combination of speed and belt format makes it well suited to tasks where both reach and consistent abrasion are required. Precise handling for shaped and flat surfaces An ergonomic layout and low mass ensure the sander tracks naturally along contours, supporting repeatable results on complex profiles. At roughly 0.8 kg, the unit is easy to manoeuvre for extended periods, enabling steady control during finishing passes. The configuration favours operators who need to work on radii, edges and planar areas without swapping multiple tools, helping to streamline process steps and reduce setup complexity. Robust design and straightforward maintenance Built for workshop use, the construction focuses on reliable operation under continuous conditions. The air‑driven motor avoids electrical hazards in sensitive production areas and simplifies maintenance routines. Routine checks and standard belt changes keep the tool in service with minimal downtime. Designed with durability in mind, the sander supports consistent performance across job cycles, contributing to a dependable production flow and lower total operating effort. Choose the Vertex VAG-310 for fast, precise sanding and contact Metav Werkzeuge in Emmerich for tailored advice or order assistance at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: VAG-310 GTIN: 4061905083099 Designation: Pneumatic belt sander Facts Belt size: 10×330 mm Speed: 16,000 r.p.m. Weight: 0.8 kg Special features Suitable for sanding curved and flat surfaces Image: https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/5b/31/97/63/6397315be7a68eb025b2a0f1/vag-310-main.jpg FAQ What belt size does this sander use? The VAG-310 accepts a 10×330 mm sanding belt for general surface preparation. What operating speed is specified? The unit runs at 16,000 r.p.m., delivering rapid abrasive action. Is the tool suitable for curved surfaces? Yes, the VAG-310 is designed specifically for sanding both curved and flat surfaces. How heavy is the tool? The sander weighs approximately 0.8 kg, making it easy to handle for extended tasks. What power source does the sander require? This is a pneumatic, air‑powered belt sander; compressed air supply is required for operation. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
10x6x8" Angle Clamp High-Strength Cast Steel Precision Fixture - Vertex
Robust, dimensionally stable clamping for repeatable setups thanks to a high-strength cast steel construction and a deliberate mass of 12 kg; the compact 10×6×8" footprint keeps fixtures accessible while reducing vibration. Order the VR-100 angle plate directly via Metav Werkzeuge or consult our specialists for application advice. VR-100 angle plate by Vertex — high-strength cast steel, 12 kg The VR-100 angle plate is a precision clamping accessory designed for machining and inspection setups, providing a stable 90° reference for fixturing and measurement tasks. High-strength cast steel construction Compact 10×6×8" footprint Mass 12 kg for improved stability Machining and inspection clamping accessory Stable foundation for precise fixturing An angle plate serves as a fixed 90° reference that simplifies setup and reduces alignment effort. The VR-100 combines a high-strength cast steel body with a mass of 12 kg, producing a stable base that dampens vibration and improves repeatability. This stability supports consistent tool paths and probe readings, which in turn reduces scrap and rework; the result is measurable productivity gains in both small-batch and production environments. Durable material engineered for workshop use Constructed from high-strength cast steel, the unit resists deformation under clamping loads and maintains squareness over time. The material choice ensures long-term dimensional stability and low maintenance requirements, making the component a cost-effective investment for busy workshops. The robust design also withstands handling and routine use on machine tables, helping to secure precise results shift after shift. Practical dimensions for versatile applications With a compact 10×6×8" footprint and a controlled mass, the plate is easy to position on benches and machine tables while still providing the inertia needed to reduce chatter during machining. The geometry is suitable for both part set-up and inspection tasks, allowing the plate to function as a fixture datum or measurement reference. Where space is at a premium, the combination of small footprint and solid construction offers a balance between accessibility and stability. Contact Metav Werkzeuge to request detailed specifications, discuss fixture compatibility, or reserve a Vertex VR-100 angle plate from local stock in Emmerich for fast delivery and expert advice Technical Data SKU: VR-100 GTIN: 4061905094088 ECLASS: 21020601 Facts Weight: 12 kg Dimensions: 10×6×8" Materials and features Material: high-strength cast steel Product type: angle plate (clamping accessory) Manufacturer: Vertex FAQ What is the primary use of this angle plate? The VR-100 angle plate is intended as a stable 90° reference for machining set-ups and inspection tasks, supporting repeatable clamping and measurement. Which materials is the plate manufactured from? The VR-100 is made from high-strength cast steel, chosen for dimensional stability and resistance to deformation under clamp loads. How does the weight affect performance? A mass of 12 kg increases inertia, helping to dampen vibration and improve positional stability during machining or probing operations. Can the plate be used on both machine tables and inspection benches? Yes, the compact 10×6×8" footprint makes the plate suitable for positioning on machine tables and benches for both fixturing and measurement tasks. Who manufactures the product and where is it produced? The product is manufactured by Vertex and supplied under the VR-100 designation for industrial clamping applications. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
11 mm Step Clamp M8/M10 Bolt, T-Slot 11 mm, 28x150x19mm - Vertex
Take advantage of a compact clamping solution that fits an 11 mm T-slot and accepts both M8 and M10 studs for flexible fixture design; the combination of small footprint and reliable holding reduces setup time and keeps production flowing. Order or request advice via Metav Werkzeuge for tailored fixture planning and procurement. Step Clamp 6133 — Compact step clamp for 11 mm T-slots (Vertex) A Step Clamp designed for secure workpiece clamping in confined fixtures, compatible with standard M8 and M10 studs and suited to intermittent series production and jobbing shops Compact 28 x 150 x 19 mm design Fits 11 mm T-slot Compatible with M8 and M10 studs Lightweight 0.48 kg for easy handling Secure clamping in confined fixture spaces The small footprint of this clamp is ideal where table space is limited: with 28 x 150 x 19 mm overall dimensions it allows multiple clamps to be placed close together without interfering with tooling. Compatibility with an 11 mm T-slot ensures direct fitment to common machine tables; the compact profile reduces overhang and minimises lever effects, which supports consistent precision during milling, drilling and light milling cycles. The compact form factor is particularly useful for short-run production and tooling racks where repeatable positioning is required. Flexible connection to standard studs for fast reconfiguration Designed to accept M8 or M10 studs, the clamp provides straightforward integration into existing fixture hardware. The dual stud compatibility means fewer specialised fasteners are needed and facilitates quick reconfiguration of clamping layouts. In practice, this reduces downtime between jobs and simplifies inventory of clamping components. For customers working across different machine tables, the ability to switch between the two common stud sizes increases the utility of each clamp in mixed-production environments. Reduced setup time through simple step-profile adjustment The step-profile design enables secure clamping at varying workpiece heights without the need for additional packing or elaborate arrangements. The stepped face allows the clamp to engage workpieces at different levels while maintaining a compact overall height, so set-up sequences become faster and less error-prone. For operators, this translates into fewer handling steps and more predictable cycle times, supporting efficient throughput in both manual and semi-automated processes. Practical handling and consistent workshop performance Weighing 0.48 kg, the clamp combines ease of handling with robust contact area for reliable force transmission. The low mass makes positioning and rapid fixturing straightforward, while the geometry distributes clamping forces to avoid localised deformation of softer workpieces. Supplied under the Vertex designation and identified as SKU 6133, this item suits maintenance, small-batch production and general workshop tasks where dependable, repeatable clamping is required. Contact Metav Werkzeuge in Emmerich for procurement advice on the Vertex Step Clamp 6133 and to discuss optimal clamping configurations for specific workpieces Technical Data Article number: 6133 GTIN: 4061905090479 eClass: 21170107 SKU: 6133 Data Dimensions: 28 x 150 x 19 mm Weight: 0.48 kg T-slot width: 11 mm Special features Bolt compatibility: M8 or M10 Product type: Step clamp Brand: Vertex FAQ What T-slot size does this clamp fit? The clamp is designed for an 11 mm T-slot, allowing direct mounting to machine tables with that slot width. Which stud sizes are supported for fastening? The clamp accepts both M8 and M10 studs, offering flexible attachment options for common fixture hardware. Is this clamp suitable for dense clamping layouts? Yes, the compact dimensions (28 x 150 x 19 mm) make the clamp suitable for dense layouts where multiple clamps must be positioned closely. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
11 mm Step Clamp M8/M10 Bolts 25x100x16mm - Vertex
Take advantage of precise T‑slot compatibility and compact dimensions to streamline fixture setups and shorten machine downtime. The combination of reliable clamping in an 11 mm T‑slot and simple bolt compatibility (M8 or M10) ensures efficient production processes. Order the clamp via Metav Werkzeuge or consult our specialists for tailored advice. Step Clamp — Compact step clamp for 11 mm T‑slot, M8/M10 bolts (Vertex) A Step Clamp for secure fixturing in modular machining tables, designed to fit 11 mm T‑slot systems and accept M8 or M10 fastening bolts. Compact 25 x 100 x 16 mm footprint Fits 11 mm T‑slot systems Compatible with M8 or M10 bolts Lightweight 0.26 kg for easy handling Secure clamping for modular machining tables The Step Clamp is designed to provide consistent, repeatable holding force in modular clamping setups. By matching an 11 mm T‑slot, the clamp aligns with standard machine tables and tooling plates, enabling straightforward installation with either M8 or M10 bolts. This compatibility reduces the need for adapters and supports faster changeovers, contributing to measurable time savings at the workbench while maintaining a stable hold during milling or drilling operations. Space-saving design that simplifies fixture setup With a 25 x 100 x 16 mm footprint and a weight of only 0.26 kg, this clamp minimises occupied table space and is easy to reposition during multi‑operation setups. The compact form factor permits close packing of multiple clamps for small or irregularly shaped parts, improving workpiece accessibility and optimising tool paths. The small mass also makes manual handling and adjustment quicker, reducing setup fatigue during repetitive fixture changes. Versatile step profile for adaptable fixturing The stepped profile allows clamping at different workpiece heights without additional shims, which supports flexible clamping strategies across similar jobs. Because the component accepts both M8 and M10 fasteners, it integrates with a wide range of clamping hardware and modular fixture systems. This adaptability helps to shorten the planning phase for new jobs and increases the versatility of existing tooling inventories, making the clamp a practical choice for workshops prioritising efficiency and modularity. Choose the Vertex Step Clamp through Metav Werkzeuge for dependable T‑slot fixturing; contact Metav Werkzeuge's consultants for specification support and ordering guidance Technical Data Article number: 6123 GTIN: 4061905090691 ECLASS: 21170107 Facts Dimensions: 25 x 100 x 16 mm T‑slot width: 11 mm Weight: 0.26 kg Bolt sizes: M8 or M10 Special features Step clamp design for varied clamping heights Compatible with modular clamping systems Compact footprint for dense fixture layouts FAQ What T‑slot size does this clamp require? The clamp is made for an 11 mm T‑slot, ensuring direct compatibility with standard 11 mm table slots. Which bolt sizes are compatible with the clamp? The Step Clamp from Vertex accepts M8 or M10 bolts, allowing use with common clamping screws and studs. Can the clamp be used for different workpiece heights? Yes, the step profile enables clamping at varying heights without additional shims, improving setup flexibility. What are the physical dimensions and weight of the clamp? Dimensions are 25 x 100 x 16 mm and the weight is 0.26 kg, helping to save table space and ease handling. Is the Step Clamp suitable for dense fixture arrangements? Its compact footprint and step design make it well suited for dense or multi‑clamp configurations in modular setups. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
11 mm Step Clamp M8/M10 Bolts 25x64x12mm, 0.11kg - Vertex
Take advantage of the combination of compact design, compatibility with standard clamping pins and fast fixture set-up for reliable machining results. Benefit from Vertex quality and secure your components through Metav Werkzeuge or consult our specialists for application advice. Step Clamp Vertex – Compact clamp for t-slot 11 mm, M8/M10 compatible Step Clamp designed for modular fixturing in milling and drilling applications, compatible with 11 mm t-slots and standard M8 or M10 clamping pins. Compact step clamp for t-slot 11 mm Compatible with M8 or M10 clamping pins Lightweight construction, approx 0.11 kg Precision-made by Vertex for repeatability Faster set-ups thanks to compact, standard-compatible design The Step Clamp delivers a practical balance between size and functionality. With a t-slot 11 mm compatibility and support for M8 or M10 pins, the component integrates directly into common clamping rails and fixture plates, reducing the need for bespoke adaptors. The compact footprint (25 x 64 x 12 mm) and low mass (0.11 kg) allow quicker repositioning and minimise inertia during manual handling. This translates into shorter set-up times and fewer interruptions on the shop floor, supporting a smoother production flow. Reliable clamping and repeatable results for serial work Manufactured by Vertex, the clamp is engineered to provide secure step-style positioning that helps maintain consistent workpiece height across batches. The step profile enables defined vertical adjustment without incremental shimming, which improves repeatability and reduces the potential for setup error. For workshop environments where small tolerances and steady throughput are required, the clamp’s straightforward mechanical function contributes directly to process reliability and reduced rework. Practical inventory and integration benefits for busy workshops The compact dimensions and compatibility with standard clamping bolts simplify stock management and fixture planning. Keeping a set of these clamps reduces the variety of specialised clamps required, enabling flexible fixture builds with fewer individual parts. Supplied as a single, ready-to-install element (SKU 6113), the component fits into modular fixturing systems and is particularly suited to small to medium-sized milling and drilling operations that favour rapid changeovers and lean inventory. Contact Metav Werkzeuge to secure Vertex clamping components for precise fixturing and request tailored application advice from our consultants in Emmerich Technical data Article number: 6113 GTIN: 4061905084027 Brand: Vertex Dimensions: 25 x 64 x 12 mm Weight: 0.11 kg T-slot compatibility: 11 mm Compatible with M8 or M10 clamping pins Compact step profile for vertical adjustment Suitable for modular fixture systems FAQ What t-slot size does the clamp fit? The clamp is designed for an 11 mm t-slot and integrates with standard 11 mm rails. Which clamping bolts are compatible with this clamp? Compatible clamping bolts are M8 or M10; the clamp accepts both sizes for flexible fixture design. What are the dimensions and its impact on fixture layout? Dimensions are 25 x 64 x 12 mm, allowing compact placement and close packing on fixture plates where space is limited. Is the clamp supplied ready to install? The component (SKU 6113) is supplied as a ready-to-install clamp for immediate integration into modular systems. How does the clamp support repeatability in serial production? The step profile provides defined vertical positioning that reduces the need for shims, which helps maintain consistent workpiece heights across multiple set-ups. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
11/16" T-Slot Block Single, 1-1/8x1-1/4x3/4" T-Nut, Threaded 1/2-12" & 1/2-13" - Vertex
Compact locking and fast integration are delivered by the combination of 11/16" T-slot compatibility, compact dimensions and dual-thread attachment; the result is reliable clamping with minimal setup time. Order the T-slot directly via Metav Werkzeuge or ask our consultants if needed. T-slot (single) – 11/16" T-nut, compact 1-1/8×1-1/4×3/4" (Vertex) The T-slot is a compact fixturing component intended for milling and drilling tables where an 11/16" T-nut is required, enabling secure workholding in confined setups. Compact 1-1/8×1-1/4×3/4" format Fits 11/16" T-slot Dual thread sizes: 1/2-12" & 1/12-13" Sold individually for flexible stocking Precise fixturing where space is limited For applications that demand accurate positioning without excess bulk, this component offers compact dimensions that reduce interference on the machine table while maintaining clamping strength. Compatibility with an 11/16" T-slot means the part integrates directly with many standard fixture systems used in shop and production environments. The modest footprint lessens the need for extensive repositioning of adjacent tooling, which shortens set-up times and improves repeatability — key advantages for batch work and frequent changeovers. Fast integration with common thread patterns The dual threads supported by the item enable rapid connection to a wide range of studs and clamping accessories. The specified 1/2-12" and 1/12-13" thread formats correspond to standard imperial fastenings commonly encountered in fixturing hardware, simplifying procurement and spare-part planning. For users unfamiliar with imperial thread nomenclature: the numbers denote the major diameter and thread count, so matching the correct stud ensures secure engagement and consistent clamping force. This compatibility reduces the need for adapters and streamlines assembly. Designed for dependable workshop use A low unit mass of 0.087 kg makes handling and placement straightforward during rapid set-ups, while the single-item supply model supports targeted stocking strategies for maintenance and production teams. Built under the Vertex range, the component is suitable for integration into existing clamping systems where compact, repeatable fixturing is required. Combined with Metav Werkzeuge’s supply chain from Emmerich, the part contributes to uninterrupted workshop operation by reducing lead times and simplifying ordering. Contact Metav Werkzeuge for tailored advice on the Vertex T-slot (SKU 3434I) and secure reliable supply from Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 3434I GTIN: 4061905093937 Brand: Vertex Weight: 0.087 kg Dimensions (L×W×H): 1-1/8×1-1/4×3/4" Core measurements T-slot size: 11/16" Threads: 1/2-12" and 1/12-13" Eclass: 21029107 Special features Sold individually Type: T-slot item Category: Vertex FAQ Which T-slot size does this component fit? The component is designed for an 11/16" T-slot, making it compatible with many standard milling and drilling table profiles. What thread options are available for attachment? This item features two thread specifications listed as 1/2-12" and 1/12-13", allowing use with common imperial studs and clamping hardware. Is the part suitable for frequent set-ups and repositioning? Yes; the compact form factor and low weight of the component support rapid repositioning and frequent changeovers without adding significant mass to the fixture. Can this be stocked individually for small workshops? The part is supplied sold individually, which supports selective stocking and targeted replacement strategies. Which SKU identifies this item for ordering? Order using SKU 3434I, listed under the Vertex range for straightforward procurement. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
11/16" T-Slot Nut Single With 5/8-11 Thread - Vertex
Combining a precise fit for 11/16" T-slots, a secure 5/8-11 thread, and a lightweight 0.087 kg body, the fastener delivers dependable clamping with low handling effort. Take advantage of this compact, accurate solution for repeatable setups; order directly via Metav Werkzeuge or consult their specialists for application advice. T-slot nut 3415I — 11/16" T-slot, 5/8-11 thread (Vertex) A compact T-slot nut designed for secure clamping on machine tables and fixtures, suitable for standard 11/16" T-slots. Robust 5/8-11 thread connection Fits 11/16" T-slots Lightweight 87 g mass Reliable clamping that stabilises setups The T-slot nut 3415I provides a secure mechanical interface between clamping hardware and machine tables. The 5/8-11 thread is a widely used imperial thread form that ensures strong, repeatable engagement with standard clamping bolts. In practice, this means fewer retightening cycles and improved process stability during machining or assembly operations. The component is engineered for precision positioning in the T-slot, reducing lateral play and improving fixturing accuracy for short-run and repetitive tasks. Compact dimensions for flexible handling and fast changeovers With overall dimensions of 1-1/8 x 1-1/4 x 3/4" and a low mass of 0.087 kg (87 g), the form factor minimises interference with adjacent fixtures and reduces inertia during handling. The modest size supports tight workpiece layouts while still providing a robust contact area for clamping forces. The nut’s geometry is optimised for insertion into an 11/16" T-slot, allowing quick placement and repositioning on standard tables; this facilitates efficient setup procedures and shorter machine downtime between jobs. Durable design for consistent performance across cycles Designed as a single unit for general fixturing applications, the fastener offers a straightforward, maintenance-free solution for routine workshop use. The compact fastener supports stable clamping without introducing excess bulk to the work envelope, contributing to repeatable setups and consistent production quality. Where interchangeability and reliable mechanical engagement are required, the component delivers a balance of convenience and functional robustness suitable for a broad range of industrial workshop contexts. Choose the Vertex 3415I for dependable table fixturing and contact Metav Werkzeuge in Emmerich for tailored advice and fast supply: info@metav-werkzeuge.com | +49 2822 7131930 Technical data SKU: 3415I GTIN: 4061905093944 Designation: T-slot nut, single unit Core specifications Dimensions: 1-1/8 x 1-1/4 x 3/4" Thread: 5/8-11" T-slot size: 11/16" Weight: 0.087 kg Features Sold individually ECLASS: 21029107 Category: Vertex FAQ Which T-slot size does this nut fit? The fastener fits an 11/16" T-slot; the geometry is intended for standard 11/16" machine table slots. What thread does the nut use? The component features a 5/8-11" thread, a common imperial thread form for clamping hardware. Is the item sold as a single piece? Yes — the product is supplied as a single unit under SKU 3415I. What are the main dimensions and weight? Overall dimensions are 1-1/8 x 1-1/4 x 3/4" and the weight is 0.087 kg (87 g). Who manufactures the component? The fastener is produced by Vertex; the SKU 3415I is part of Vertex’s range of T-slot clamping hardware. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
11/16x1" Coupling 3/8-16" Thread - Vertex
The combination of a robust 3/8-16 threaded connection and a compact 11/16 x 1" outer dimension delivers secure, repeatable joins while keeping handling effort minimal; benefit from reduced changeover times and consistent tool alignment. Order the coupling directly via Metav Werkzeuge or consult our advisers for integration advice. Vertex 2613I coupling — precision 3/8-16 threaded connector, 11/16 x 1" A Vertex 2613I coupling engineered to provide a secure mechanical connection where a compact threaded interface is required in workshop and machining setups. Quick-lock 3/8-16" threaded connection Compact 11/16 x 1" outer dimension Lightweight construction, approx. 0.035 kg Secure and efficient tool connections that reduce downtime The 3/8-16 threaded interface ensures a standardised mechanical join compatible with a wide range of fixtures and toolholders. Threaded connections transfer torque and axial loads reliably; the defined 11/16 x 1" outer dimension provides a consistent seating surface for alignment. For procurement and inventory, the coupling appears under the SKU and GTIN identifiers to simplify ordering and traceability. Using a standardised connector reduces setup time and the risk of misalignment that can lead to rejects or rework, delivering measurable improvements to process efficiency. Compact design that eases handling and improves balance The compact form factor and lightweight nature of the coupling lower the rotating mass introduced into an assembly, which can reduce vibration and thermal drift during operation. At approximately 0.035 kg, the component is easy to manoeuvre during assembly and changeovers, contributing to safer and faster handling on the workbench. Reduced mass also benefits dynamic systems where inertia and balance affect cycle time and tool life; the compact profile supports tight installation spaces without compromising mechanical engagement. Ready for integration into many workshop setups Identified by SKU 2613I, the coupling suits applications requiring a standard 3/8-16 threaded connection and a compact outer dimension. The product is useful where a repeatable mechanical interface is needed between hand tools, jigs or machine-mounted adapters. The straightforward geometry simplifies inspection and replacement procedures; compatibility with established threads and dimensions makes it straightforward to specify in bills of materials and CAD assemblies. Clear identification supports purchasing and stock management. Confidence through consistent supply and technical transparency Sourcing via an experienced distributor gives access to technical drawings and detail imagery to support installation and QA processes. Supplied product documentation aids engineers in verifying fit and function before integration, and consistent labelling helps with batch control and traceability. Working with a partner that functions as a quality filter for the European market reduces the logistical complexity of obtaining precision workshop components and supports steady production planning. Contact Metav Werkzeuge today to specify the Vertex 2613I coupling for procurement or to request additional technical documentation via info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data Article number: 2613I GTIN: 4061905087059 ECLASS: 21131711 Facts Dimensions: 11/16 x 1" Thread: 3/8-16" Weight: 0.035 kg Special features Designation: Coupling Brand: Vertex Images: technical drawing, detail image, main image FAQ What thread standard does this coupling use? The coupling uses a 3/8-16 threaded connection, specified on the Vertex 2613I for compatibility with standard 3/8-16 fittings. How large is the coupling and will it fit restricted spaces? The outer dimension is 11/16 x 1", giving a compact envelope suitable for installations with limited clearance. Is the weight significant for rotating assemblies? At approximately 0.035 kg the coupling introduces low rotating mass, which helps to limit additional inertia in sensitive assemblies. How can the product be identified for ordering? Use SKU 2613I or GTIN 4061905087059 when placing orders or updating bills of materials. Are there technical drawings available for installation checks? Technical drawing and detail images are provided to support verification of fit and integration procedures for the Vertex 2613I coupling. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
110/220/380/24V Halogen Lamp Dust-Protected, IP67 Light/IP65 Arm, Cable 1.8m - Vertex
Take advantage of a robust, dust-protected inspection lamp that combines IP67 protection at the lamp head with an IP65 arm, flexible positioning via a single-joint arm, and broad voltage compatibility for straightforward integration into varied workshop installations — order the VHL-300SR directly via Metav Werkzeuge or ask our consultants if needed. VHL-300SR Halogen inspection lamp by Vertex — dust-protected, IP67 lamp head and IP65 arm The VHL-300SR is a halogen inspection lamp designed for precision workshops, inspection benches and maintenance stations where reliable, focused illumination and rugged protection are required. Dust-protected lamp head for harsh environments IP67-rated lamp head and IP65-rated arm Flexible single-joint arm for precise positioning 1.8 m supply cable included Reliable illumination where measurement precision matters A robust light source is essential for visual inspection and fine assembly. The VHL-300SR uses a halogen bulb format compatible with 50/55/70 W lamps, delivering a consistent, high-contrast beam well suited to close-range inspection tasks. The unit’s dust-protected construction and the IP67 rating at the lamp head ensure that the optical components remain free from particulate contamination, reducing the need for frequent cleaning and maintaining consistent visual conditions for quality control. This stability supports efficient, repeatable inspection processes and minimises downtime due to maintenance. Durable design that adapts to workshop infrastructure Built for everyday industrial use, the lamp head is rated IP67 while the articulated support is rated IP65, providing a clear separation between the light source’s ingress protection and the arm’s mechanical resilience. The single-joint arm allows quick, precise alignment of the beam without complex adjustment procedures, helping technicians position the light with one hand while working. Multiple supply options (110/220/380/24V) permit direct integration into different electrical systems without the need for additional transformers, simplifying installation across varied production lines and inspection benches. Practical setup and service benefits for production environments Installation and routine handling are simplified by the inclusion of a 1.8 m cable, which provides immediate connectivity to nearby power supplies. The lamp’s compact form and modest mass (approximately 2.9 kg) make it straightforward to mount and reposition on inspection rigs or benches. Compatibility with standard halogen wattages (50/55/70 W) reduces stocking complexity for spare bulbs and keeps servicing predictable. The result is a lighting solution that supports long operating periods and predictable maintenance cycles, enabling a smooth workflow in small and medium-sized workshops. Why this lamp supports quality-focused teams Manufactured by Vertex, the unit combines traditional halogen colour rendering with robust ingress protection so that visual inspection benefits from natural contrast and true colour representation. For teams focused on precision work, the configuration reduces the likelihood of visual errors and contributes to consistent product quality. The lamp’s straightforward technical concept—standard bulb sizes, clear IP classification and an articulated support—translates into reliable, measurable advantages for inspection, assembly and repair tasks. Discuss the Vertex VHL-300SR with Metav Werkzeuge to confirm the best voltage option and mounting arrangement for specific applications — contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: VHL-300SR GTIN: 4061905091100 Manufacturer: Vertex Numerical data Weight: 2.9 kg Voltage options: 110/220/380/24V Compatible bulb wattages: 50/55/70 W Materials & special features Lamp type: halogen Protection: Lamp head IP67, Arm IP65 Arm: 1 joint Accessories included: 1.8 m cable FAQ How is the VHL-300SR protected against dust and water? The Vertex VHL-300SR has an IP67 rating at the lamp head and an IP65 rating on the arm, meaning the head is dust-tight and protected against temporary immersion while the arm is protected against dust and low-pressure water jets. Which bulbs can be used with this inspection lamp? Standard halogen bulbs of 50/55/70 W are suitable for use with this inspection lamp; these common wattages simplify spare-part management and replacement. Can the lamp be connected to different supply voltages? Yes — the VHL-300SR supports 110/220/380/24V supplies, allowing straightforward integration into various electrical systems without additional converters. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
110mm Clamp With Hook Vertical Base, 10,000N Closing Force, 11,000N Holding Force - Kukamet
The robust combination of 10,000 N closing force and 11,000 N holding capacity, paired with a compact 0.86 kg design and an upright mounting base, delivers dependable clamping for compact fixtures and production jigs. Order the 332 latching clamp via Metav Werkzeuge or consult the advisors if additional configuration details are required. 332 Latching Clamp (Vertical Base) — 10,000 N closing force The 332 is a latching clamp designed for secure over-centre locking in workshop and industrial fixturing, ideal where upright mounting and a hooked latch are required 10,000 N closing force 11,000 N holding capacity Vertical base for upright mounting Blackened finish with hook Dependable clamping for repeatable production The over-centre latching mechanism delivers consistent clamping pressure and fast actuation, making it suitable for repetitive assembly and fixturing tasks. With a closing force of 10,000 N and a holding capacity of 11,000 N, the clamp secures workpieces reliably without frequent retightening. The relatively light 0.86 kg construction reduces load on fixtures and eases handling during reconfiguration. The hooked latch provides an instant mechanical engagement that is less sensitive to slight variations in part thickness, helping to maintain cycle times and minimise stoppages. Built for industrial longevity and simple maintenance Constructed with a blackened finish, the unit resists surface wear and offers basic corrosion protection compatible with workshop environments. The robust construction supports demanding applications while keeping maintenance straightforward: routine inspection and light lubrication of the pivot points are normally sufficient. The thread length of 110 mm allows flexible adjustment and secure anchoring in a range of tooling plates and clamping assemblies. As a result, the clamp combines industrial durability with low life-cycle overheads, supporting reliable uptime on production lines. Quick integration into existing fixtures and jigs The vertical base mounting arrangement provides a compact footprint for upright installation on benches, fixturing plates or machine beds, simplifying alignment in tight spaces. The integrated hook permits quick engagement with mating catches or fixtures, reducing setup time compared with multi-part clamping solutions. Identification via SKU B332-5 and GTIN facilitates procurement and inventory tracking. Overall, the unit supports efficient line-side operations through straightforward mechanical design and compatibility with standard workshop components. For robust, space-saving latching in production and workshop fixtures, request the Kukamet 332 via Metav Werkzeuge — contact info@metav-werkzeuge.com or call +49 2822 7131930 for availability and application guidance Technical data SKU: B332-5 GTIN: 8680731508499 Manufacturer: Kukamet Material finish: blackened (bruised) Facts Closing force: 10,000 N Holding capacity: 11,000 N Weight: 0.86 kg Thread length: 110 mm Special features Vertical base (upright foot) for upright mounting Includes hook for latching engagement Category: Clamp (spanner) Asset: product image and catalogue PDF available FAQ What is the maximum clamping force of this latching clamp? The 332 latching clamp offers a closing force of 10,000 N and a holding capacity of 11,000 N, suited to demanding fixturing tasks. Can the clamp be mounted upright on a fixture plate? Yes; the clamp features a vertical base (upright foot) designed specifically for upright mounting on fixture plates and machine beds. Is the hook integral to the clamp, and what benefit does it provide? The clamp includes an integrated hook, enabling quick mechanical engagement with mating catches and reducing cycle time for repetitive operations. What finish does the clamp have and how does this affect durability? The unit is supplied with a blackened finish, providing surface wear resistance and basic corrosion protection appropriate for workshop environments. Which identifier should be used for ordering and inventory? Use SKU B332-5 or GTIN 8680731508499 to identify the clamp for procurement and stock control. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
110mm Clamping Toggle Clamp Horizontal Base With Hook, 10kN Closing Force - Kukamet
Take advantage of the robust holding force and compact horizontal-foot mounting to secure parts reliably on jigs and fixtures; the integrated hook and black blued finish ensure long service life and straightforward use. Order or request application advice via Metav Werkzeuge for fast integration into production processes. Latch Clamp 331 horizontal-foot latch clamp with hook — Kukamet A Latch Clamp 331 designed for dependable locking in fixtures and transport applications, delivering high holding and clamping forces with a space-saving horizontal-foot mounting. Horizontal-foot mounting for bench or fixture Holding force up to 11,000 N Clamping force up to 10,000 N Black blued finish with integrated hook Secure, repeatable clamping for series work The Latch Clamp 331 brings consistent clamping performance where repeatability matters. With a holding force of 11,000 N and a clamping force of 10,000 N, the component prevents movement under load and reduces rework caused by slippage. These force figures translate into reliable part retention during machining, assembly or transport, supporting tighter tolerances and fewer rejects. The forces are given as maximum values and support decision-making when specifying fixtures. Simple integration thanks to horizontal-foot mounting A horizontal-foot mounting simplifies installation into existing jigs or benches and shortens setup time. The mounting arrangement enables low-profile attachment, which keeps the clamping plane close to the workpiece and reduces interference with tooling. With an adjustable thread length of 110 mm, fine alignment and clamp stroke adjustment are straightforward, while the 0.86 kg mass balances rigidity with ease of handling during assembly and maintenance. Durable finish and positive hook closure for daily use The black blued finish provides a protective surface that limits corrosion in typical workshop environments and reduces visual wear. The integrated hook offers a positive engagement mechanism for secure closure and vibration resistance, so clamps stay locked during handling and movement. These design choices lower maintenance demands and extend service intervals compared with untreated parts. Compact design that keeps fixtures efficient Compact dimensions and lightweight construction make this latch clamp suitable for confined tooling spaces without sacrificing performance. The short footprint of the horizontal foot and the hook-style latch free up usable table area, enabling denser clamp layouts and more flexible fixturing. For production cells where space and repeatability are premium requirements, this clamp supports efficient layout and faster changeovers. For application advice, specification checks or to discuss how the Kukamet Latch Clamp 331 can be integrated into existing fixtures, contact Metav Werkzeuge — our specialists in clamping technology will support selection and implementation Technical data SKU: B331-5 GTIN: 8680731508451 Weight: 0.86 kg Material / finish: black blued Mounting: horizontal foot Facts Holding force (max): 11,000 N Clamping force (max): 10,000 N Thread length: 110 mm Special features With hook eClass: 21041718 ETIM: EC011973 FAQ What maximum forces can be expected from this clamp? The latch clamp provides a maximum holding force of 11,000 N and a clamping force of 10,000 N, specified as peak values for selection and fixture design. Is the clamp suitable for compact fixtures and low-profile setups? Yes, the horizontal-foot mounting and compact construction make this latch clamp well suited to confined tooling areas and dense clamp arrangements. How is the clamp secured and adjusted on a fixture? Securing is via the horizontal foot; fine adjustment is achieved using the 110 mm thread length supplied with the clamp to set the required stroke and engagement. Does the finish offer corrosion protection for workshop use? The black blued finish reduces surface corrosion and visual wear, making it appropriate for standard workshop and assembly environments. Which SKU should be ordered for this latch clamp? Order SKU B331-5 for the latch clamp described, and refer to the GTIN 8680731508451 for catalogue and stock checks. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
110mm Closing Clamp Vertical Base With Hook, 10kN Closing Force, Blackened Steel - Kukamet
Take advantage of the combination of high clamping and holding forces, robust black-blued corrosion protection and a vertical-foot mounting for secure fixture assembly; order the latch clamp directly via Metav Werkzeuge or ask our consultants for application advice. Latch clamp 312 by Kukamet — vertical-base lever clamp with hook and high closing force the Latch clamp 312 is a vertical-foot lever clamp designed for secure closing and rapid locking in fixtures, transport boxes and jigs Vertical base for sturdy mounting Clamping force up to 10,000 N Holding force up to 11,000 N Black blued finish for corrosion resistance Strong closing power for reliable fixation The latch clamp delivers a clamping force of 10,000 N and a holding force of 11,000 N, values that translate into dependable retention in demanding assembly and welding fixtures. These numeric specifications indicate the maximum compressive and tensile resistance the clamp can apply and withstand; in practice this means secure closure under dynamic loads and during machining operations where vibrations or forces could otherwise cause parts to shift. The vertical-foot mounting ensures that the applied force is transmitted directly into the fixture base, reducing leverage on mounting screws and improving overall stability. Such characteristics make the device particularly suited to repeatable production processes where consistent clamping pressure is essential for quality control. Built for workshop longevity and straightforward installation Finished in black blued steel, the clamp resists surface corrosion while maintaining a professional workshop appearance; the bluing offers a thin, protective layer that reduces oxidation without compromising dimensional accuracy. The unit includes a hook for positive engagement and a thread length 110 mm that allows flexible adjustment and fine setting of the closure gap. Weighing approximately 0.945 kg, the clamp balances robustness with manageable mass for fixture designers. The vertical base form factor facilitates straightforward bolting to plates or pallets and reduces the need for complex brackets, helping to speed up jig assembly and minimise alignment effort during setup. Designed for production environments and repeatable processes The toggle-style mechanism provides rapid locking with consistent repeatability, supporting fast cycle times on assembly lines or in small-batch production. Because the construction focuses on mechanical simplicity, maintenance is limited to routine inspection and lubrication of pivot points, ensuring long service intervals and minimal downtime. The combination of strong mechanical performance and uncomplicated upkeep supports cost-effective production: fixtures hold parts precisely, fewer rejects occur, and operators spend less time on adjustments. For system integrators and workshop managers, the clamp represents a practical component for robust fixture design that prioritises reliability and ease of use. For secure fixture clamping, choose the Kukamet latch clamp via Metav Werkzeuge — contact Metav Werkzeuge for tailored advice and supply from Emmerich at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: B312-5 GTIN: 8680731508376 Manufacturer: Kukamet Facts Clamping force: 10,000 N Holding force: 11,000 N Thread length: 110 mm Weight: 0.945 kg Special features Material: black blued steel Mounting: vertical base With hook: yes SKU: B312-5 FAQ What types of fixtures suit this latch clamp? The latch clamp 312 by Kukamet is suitable for assembly jigs, welding fixtures, transport boxes and palletised production systems where a vertical-foot clamp and positive hooked engagement are required. How is the clamp mounted and adjusted? Mounting is by bolting the vertical base to the fixture plate; adjustment is achieved via the threaded spindle (thread length 110 mm) to set the closure gap precisely for each application. Is the surface finish corrosion resistant? The black blued finish provides surface protection against oxidation and is appropriate for workshop environments; the finish preserves dimensional accuracy while reducing visible corrosion. What maintenance is required to keep performance consistent? Periodic inspection of pivot points and light lubrication are recommended to maintain the toggle mechanism’s rapid locking performance and long service life for the Kukamet latch clamp 312 (SKU B312-5). Can this clamp cope with dynamic loads during machining? Yes; with a clamping force of 10,000 N and a holding force of 11,000 N, the clamp is designed to retain parts securely under the dynamic conditions typical of machining and assembly operations. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
110mm Closure Clamp Vertical Base, Hook, 10,000N Thrust, Galvanised, 110mm Thread, 11,000N Holding Force - Kukamet
Benefit from the combination of a galvanised finish, a compact 0.945 kg mass and an 11,000 N holding force for dependable clamping in production and transport applications. Order the closure solution directly via Metav Werkzeuge or consult our specialists for integration advice. Verschlussspanner 312 — Vertical-base toggle latch clamp, galvanised, 11,000 N holding force (Kukamet) The Verschlussspanner 312 is a vertical-base toggle latch clamp designed for secure fastening in fixtures, transport boxes and production jigs Galvanised corrosion-resistant finish Vertical base for secure mounting 11,000 N maximum holding force Integrated hook and 110 mm thread length Consistent clamping power for demanding workflows The Verschlussspanner 312 is engineered as a toggle latch delivering a high holding capacity while keeping installation compact. With a rated 11,000 N maximum holding force and a pressing force of 10,000 N, the clamp secures lids and components reliably under dynamic loads. This performance reduces repeat checks and downtime, promoting a more efficient workflow in assembly and logistics. The lever-action mechanism converts operator input into consistent clamping pressure, ensuring reproducible results across shifts. Robust surface and compact handling for long service life A galvanised finish protects the clamp from corrosion, extending service intervals in humid or workshop environments. The unit’s slim mass of 0.945 kg makes it easy to fit where space is limited without compromising strength. These characteristics provide a balance between durability and manoeuvrability: the protective coating minimises maintenance while the compact form simplifies retrofitting to existing fixtures and transport frames. Straightforward mounting and flexible attachment options Fitted with a vertical base for secure anchoring, the device allows direct mounting to plates and frames where vertical alignment is required. The integrated hook and 110 mm thread length support precise adjustment and reliable engagement with mating parts. For designers and technicians, this means faster assembly of jigs and fixtures and straightforward tolerance compensation during setup, which shortens commissioning time for new production lines. Clear specifications for planning and procurement Key technical values are transparent and ready for system documentation: galvanised material, vertical mounting style, thread length and force ratings reduce uncertainty during selection. The compact dimensions and repeatable lever action simplify risk assessments for vibration and transport applications. Installation planners benefit from the clear mechanical parameters when integrating the clamp into CAD layouts and fixture lists, accelerating procurement and ensuring compatibility with existing equipment. Choose the Kukamet 312 toggle latch for reliable, high-force clamping and contact Metav Werkzeuge for ordering and technical guidance: info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 312-5 GTIN: 8680731504897 Weight: 0.945 kg Material: Galvanised Mounting: Vertical base Core figures Maximum holding force: 11,000 N Maximum pressing force: 10,000 N Thread length: 110 mm Special features Integrated hook Vertical-foot fastening Lever/toggle mechanism Compact construction FAQ What maximum holding force does the clamp provide? The clamp offers a maximum holding force of 11,000 N, as stated for the Verschlussspanner 312 by Kukamet. Is the latch suitable for outdoor or humid environments? The galvanised surface finish increases corrosion resistance, making the clamp suitable for humid workshop and sheltered outdoor conditions. How is the device mounted? Mounting is by a vertical base (vertical foot) that allows secure anchoring to plates and frames. What adjustment options are available? Adjustment is achieved via the threaded section with a 110 mm thread length and the integrated hook for precise engagement. Which applications is this toggle latch best suited for? Typical uses include securing lids, transport boxes, production jigs and fixtures where reproducible, high clamping force is required. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
110mm Indexing Table Horizontal/Vertical Rapid Rotation 4° Per Turn 20" Readout 35kg/18kg Capacity - Vertex
Take advantage of precise indexing, a compact footprint and robust load capacity for reliable small-part machining — order directly via Metav Werkzeuge or contact our specialists for tailored advice. Vertex HV-4 rotary dividing table — MT-2 taper, 110 mm diameter The Vertex HV-4 rotary dividing table is a compact horizontal/vertical indexing unit engineered for precise part orientation and flexible fixture mounting in small workshops and toolrooms. 110 mm diameter working face MT-2 spindle taper for common tooling Horizontal and vertical indexing capability Max load 35 kg horizontal, 18 kg vertical T-slots 3x11 mm for flexible fixturing Repeatable positioning for routine precision The HV-4 provides dependable repeatable positioning through its geared spindle, which delivers 4° per spindle revolution and a scale division of 20", enabling consistent indexing for series work. The geared indexing is particularly suited to tasks where fixed-angle steps are needed; the mechanism reduces the need for continuous measurement and speeds up setup times. Where finer increments are required, the clear scale and robust spindle let operators verify alignment quickly, maintaining production pace while ensuring conformity to drawing tolerances. This combination of measurable increments and solid mechanical guidance supports predictable throughput and lowers the risk of rework. Small footprint with substantial load capacity Despite a compact footprint, the unit offers a 110 mm diameter working face and a solid support structure that keeps tools and workpieces stable during light machining operations. With an overall weight of 7 kg and external dimensions of 138 x 118 x 58 mm, the component can be integrated onto benchtop fixtures or small rotary setups without dominating the workspace. Load ratings of 35 kg horizontal and 18 kg vertical mean the table accommodates a wide range of small assemblies and fixtures while preserving positional stability, which is crucial when milling, marking or indexing successive holes. The compact design reduces wasted bench space while maintaining the rigidity expected in daily workshop use. Built for compatibility and flexible mounting Mounting and tooling compatibility have been prioritised: the HV-4 features an MT-2 taper spindle and three T-slots 3x11 mm, allowing straightforward attachment of common tooling, chucks and bespoke fixtures. The dual-orientation design (horizontal/vertical) increases application flexibility, so the same unit can be reconfigured for different setups without elaborate retooling. The short overall height of 72 mm and standardised spindle interface simplify integration with existing machines or jig systems. For workshops that value quick changeovers and multi-task capability, this indexing table supports a variety of light machining and assembly tasks while keeping changeover times low. For precision indexing from a trusted brand, consider the Vertex HV-4 and contact Metav Werkzeuge for availability, delivery options and application advice: info@metav-werkzeuge.com — +49 2822 7131930 Technical data Article number: HV-4 GTIN: 4061905083266 Brand: Vertex EClass: 36600610 Facts Diameter: 110 mm Height: 72 mm External dimensions: 138 x 118 x 58 mm Weight: 7 kg Max load: 35 kg horizontal; 18 kg vertical Spindle indexing: 4° per spindle revolution Scale division: 20" T-slots: 3 x 11 mm Special features Spindle interface: MT-2 Orientation: Horizontal / Vertical Compact, workshop-oriented construction Suitable for bench mounting and small fixtures FAQ What spindle taper does the unit use? The Vertex HV-4 uses an MT-2 spindle taper for compatibility with standard tooling and arbors. What are the maximum permissible loads? Permissible loads are 35 kg when mounted horizontally and 18 kg in vertical orientation for the HV-4 rotary dividing table. How fine are the indexing steps? Indexing is driven at 4° per spindle revolution with a scale division shown as 20", providing clear, repeatable steps for many workshop tasks. Can the table be used both horizontally and vertically? Yes. The HV-4 is designed for both horizontal and vertical operation, increasing fixture and process versatility. Is the unit suitable for bench-mounted fixtures in a small workshop? The compact dimensions and 3 x 11 mm T-slots of the HV-4 make it well suited for bench-mounted fixtures and small toolroom applications. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
110mm Parallel Shim Set Wavy 8 Pairs 0.3mm Hardened Spring Steel ±0.004mm Pair Tolerance IT5 - AMF
Take advantage of a precision-engineered shim set that combines precision-ground surfaces, hardened spring steel and tight height tolerances for repeatable clamping and minimal setup time. Order the AMF set directly via Metav Werkzeuge or consult the Metav advisors for workshop-specific recommendations. Parallel shim set No. 6344SP — wave-shaped, precision-ground shims by AMF A Parallel shim set No. 6344SP designed for precise stacking and clamping of thin or multiple workpieces in machining and inspection environments Precision-ground spring steel Height steps of 2 mm Pair tolerance IT5 in height Nominal height tolerance ±0.004 mm Wave-shaped top reduces swarf retention Repeatable stack heights for efficient clamping The set provides precision-ground shims manufactured from hardened and tempered spring steel, delivering consistent stack heights and reliable repeatability in fixturing. Tight dimensional control — including a pair tolerance to IT5 and a nominal height tolerance of ±0.004 mm — reduces the need for repeated adjustments and speeds up changeovers. The wave-shaped top face assists in avoiding trapped chips on the support surface, which contributes to maintaining the intended clamping plane and protects the parallelism of the clamped component. Material choice and tolerances that save setup time The combination of spring steel and precision finishing ensures longevity under repeated clamping cycles while remaining thin enough for fine height adjustments. A material thickness of 0.3 mm and clearly defined height gradation of 2 mm allow for controlled buildup of shim stacks rather than improvisational packing. This reduces operator effort during setup and minimises the risk of stacked instability. Compliance of remaining dimensions with DIN ISO 2768 provides compatibility with standard tooling and fixturing practices in professional workshops. Practical design for cleaner, safer workshop use The wave-shaped surface geometry keeps the load zone clear of swarf, so the parallelism of the clamped workpiece is not impaired and no additional cleaning steps are required between adjustments. Precision grinding of each element preserves flatness on the bearing faces, which is beneficial when clamping several flat or individual thin components together. The set is intended for straightforward integration into existing clamping routines and is suited to industrial and trade environments where repeatability and cleanliness are priorities. For reliable, precision clamping with AMF quality, contact Metav Werkzeuge to discuss the Parallel shim set No. 6344SP and its suitability for specific workshop applications; Metav Werkzeuge can provide technical advice and swift supply from Emmerich Technical Data SKU: 4000603656NW Type: Nr. 6344SP - 25-39 Product type: Parallel shim set Manufacturer: AMF Content: 8 pairs Overall length: 110 mm UID: 4000603656NW Facts Material thickness: 0.3 mm Height gradation: 2 mm Pair tolerance: IT5 (height) Nominal height tolerance: ±0.004 mm Remaining dimensions: per DIN ISO 2768 Special features Wave-shaped top surface Precision-ground bearing faces Spring steel, hardened and tempered No swarf retention on support surface Maintains parallelism of clamped workpiece Suitable for multiple flat or single thin workpieces FAQ What material are the shims made from and how does that affect durability? The AMF Parallel shim set No. 6344SP is made from hardened and tempered spring steel, which offers high fatigue resistance and maintains flatness under repeated clamping cycles. What tolerances can be expected for stack heights? Stack-building with the Parallel shim set No. 6344SP is supported by a pair tolerance to IT5 and a nominal height tolerance of ±0.004 mm, ensuring reproducible results in jigs and fixtures. Is the surface finish suitable for precision inspection fixtures? Yes, the precision-ground faces of the Parallel shim set No. 6344SP provide flat bearing surfaces that support accurate clamping and do not interfere with inspection tolerances. Will chips or swarf affect clamping accuracy with these shims? The wave-shaped top profile reduces swarf retention on the support face, so the parallelism of the clamped component is preserved and additional cleaning between adjustments is often unnecessary when using this set. Can the shims be combined to clamp very thin workpieces? The design allows easy stacking of several shims to achieve fine height adjustments, making the set suitable for clamping multiple thin or flat workpieces in a controlled manner. Manufacturer: AMF; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
110mm Parallel Shim Set Wavy 8 Pairs 0.3mm Material Thickness, Precision Ground - AMF
Take advantage of precision-ground, hardened spring steel shims with 0.3 mm thickness and a clear 2 mm height stepping to maintain workpiece parallelism and reduce setup time; order directly via Metav Werkzeuge or contact our advisers for configuration assistance. AMF Parallel shim set Nr. 6344SP - 9-23 (wavy profile, 110 mm) The AMF Parallel shim set Nr. 6344SP - 9-23 is a specialised collection of precision shims designed for accurate clamping and alignment in metalworking and general workshop fixturing. Wavy profile prevents chips on support surface Precision-ground shims, thickness 0.3 mm Hardened and tempered spring steel Height increments 2 mm, pair tolerance IT5 Maintain true parallelism with fast, repeatable setups Precision shims deliver measurable gains in setup reliability. The precision-ground surfaces and pair tolerance IT5 ensure nominal height deviations are held to ±0.004 mm, which reduces rework and inspection time. Using stepped shims streamlines the process of shimming between jaws or supports, so maintaining true parallelism of the clamped workpiece becomes a routine task rather than a daily challenge. This directly improves throughput and machining consistency. Durable material and profile for clean contact surfaces Built from hardened and tempered spring steel, the shims tolerate repeated clamping without deformation, extending service life and lowering replacement frequency. The wavy profile minimises contact of loose chips with the underside of the workpiece, so debris is less likely to compromise the contact surface. This leads to more consistent clamping forces and a lower risk of surface marking on delicate parts, preserving component quality during handling and machining. Precise increments that simplify multi‑part clamping With a 0.3 mm material thickness and 2 mm height steps, the set offers fine, graduated adjustment for stacking or combining shims to reach the required clearance. The small thickness and clear stepping make it straightforward to clamp several flat or thin components together without loss of alignment. These features reduce setup iterations and support efficient jigs and fixtures where repeatable, small adjustments are essential. Engineered tolerances for measurement confidence Tolerance design follows recognised standards to support predictable results: nominal height tolerance of ±0.004 mm and remaining dimensions in accordance with DIN ISO 2768m. Such specifications provide a verifiable basis for procurement decisions and quality audits, allowing the set to be integrated into measurement-controlled workflows and documented procedures with minimal additional calibration. Contact Metav Werkzeuge for tailored advice on integrating the AMF shims into existing fixtures and order support directly from Emmerich Technical Data Article number: 4000603655NW Type: Nr. 6344SP - 9-23 Product: Parallel shim set Brand: AMF Content: 8 pairs Length: 110 mm Facts Material thickness: 0.3 mm Height step: 2 mm Pair tolerance: tp in height IT 5 Nominal height tolerance: ±0.004 mm Length: 110 mm Set content: 8 pairs Special features Wavy profile to reduce chip retention Precision-ground surfaces Hardened and tempered spring steel Remaining dimensions per DIN ISO 2768m Advantage: no chips remain on support surface Preserves parallelism of clamped workpiece Enables clamping of several thin or flat workpieces FAQ What material are the shims made of? The shims are manufactured from hardened and tempered spring steel, which gives the AMF shim set good wear resistance and spring characteristics suited to repeated clamping. How fine are the height increments? Height increments are 2 mm per step; combined with the 0.3 mm thickness of each shim, this allows precise stacking and fine adjustment when setting up fixtures. What tolerances can be expected for height? Nominal height tolerance is ±0.004 mm and pair tolerance is specified as IT5, ensuring consistent, repeatable height control for precision applications. Can these shims prevent chips from affecting the clamping surface? Yes, the wavy profile reduces chip retention on the support surface, helping to maintain clean contact and consistent clamping pressure. Is this set suitable for clamping multiple thin workpieces? The design and fine thickness make the set suitable for clamping several flat or thin components without compromising parallelism. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
110mm Screw Vice Nr.6430S Atlas With Locknut H100-140mm, 60kg Load Capacity - AMF
Combining a 140 mm jaw width, an adjustable height of 100–140 mm and a 60 kg maximum clamping capacity delivers secure, repeatable holds for workshop and light industrial tasks; order the Atlas No. 6430S through Metav Werkzeuge or consult our specialists for specification advice. Atlas No. 6430S - 140 screw vice (AMF) — 140 mm jaw, 100–140 mm adjustable height The Atlas No. 6430S - 140 is a heavy-duty screw vice engineered for secure clamping and fine height adjustment in benchwork, jigging and assembly applications 140 mm jaw width for stable workholding Adjustable height 100–140 mm for versatile setups 60 kg maximum clamping capacity for reliable grip Secure hold and adaptable setup for repeatable results The vice’s 140 mm jaw and adjustable height provide a combination of surface contact and vertical flexibility that improves repeatability during assembly and machining tasks. The adjustable jaw height (from 100 mm to 140 mm) allows the vice to accommodate components of varying profiles without improvised shims, reducing setup time and the risk of slippage. The unit’s measured dimensions—such as the 110 mm overall length—make it straightforward to plan bench layouts and ensure compatibility with standard fixtures. These tangible specifications translate directly into faster job changeovers and a more reliable production flow. Precise movement and dependable locking for accurate positioning A robust lead mechanism, specified as 30 x 6 for the main thread, controls jaw travel with predictable increment per turn, enabling fine positional adjustment. The inclusion of a locknut (Gegenmutter) secures the chosen height, preventing unintentional movement during machining or assembly. The vice’s 46 mm spanner size facilitates rapid tightening and adjustment with standard workshop tools, while the listed 60 kg clamping capacity indicates the maximum recommended holding force for stable operations. Descriptions such as “lead screw” refer to the part that converts rotational input into linear motion; here it is optimised for controlled, repeatable clamping. Practical versatility for workshops and light industry With compact proportions and clearly defined capacities, this screw vice suits tasks from fixture building to small-part assembly. The measured throat depth of 75 mm (B2) helps determine how far workpieces can extend into the jaws, and the vice’s configuration supports consistent alignment when used with jigs or straight edges. For workshop managers, the combination of measurable performance data and mechanical simplicity reduces downtime and maintenance complexity. If precise clamping and straightforward operation are priorities, a vice with these characteristics is a pragmatic choice for daily use. Order the AMF Atlas No. 6430S – 140 through Metav Werkzeuge for robust, measured workholding; contact Metav Werkzeuge for tailored advice and fast delivery from Emmerich Technical data SKU: 4000833127NW Type: Nr. 6430S Atlas - 140 Product: Screw vice (Schraubbock) Brand: AMF Core data Jaw width: 140 mm Adjustable height: 100–140 mm Maximum clamping capacity: 60 Lead screw (TR): 30 x 6 Throat depth (B2): 75 Overall length: 110 mm Spanner size: 46 mm Packaging unit: 1 Special features Locknut included (Gegenmutter) Compact bench vice design Model group: Gr.140 SKU identifier: 4000833127NW FAQ What is the maximum clamping capacity of this vice? The vice has a maximum clamping capacity of 60, as specified for the Atlas No. 6430S - 140. How does the adjustable height improve setup flexibility? Adjustable height (100–140 mm) allows the jaws to be positioned for different component profiles and reduces the need for additional shimming when using the vice for varied workpieces. What does the lead screw specification 30 x 6 mean in practice? The designation 30 x 6 refers to the lead screw dimensions (diameter and pitch) that determine how much the jaw moves per turn, enabling precise and predictable jaw travel. Is a spanner required for adjustments and what size is it? Adjustments and maintenance typically use standard tools; the specified spanner size for relevant fasteners on this vice is 46 mm. Can the vice be used for light machining and jigging tasks? Yes, the vice’s measured capacities and locking feature make it suitable for light machining, jigging and assembly where reliable repeatable clamping is required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
110mm Swivel Rotary Indexing Table Three-Point Locking, 4° Per Spindle Turn, 13.5kg - Vertex
Take advantage of a compact, swivelable indexing solution with a 110 mm diameter and 4° positioning increments for repeatable angular set-ups; order the unit directly via Metav Werkzeuge or ask our consultants for tailored integration advice. Vertex VU-100 – Swivelable indexing rotary table, 110 mm working diameter The Vertex VU-100 is a compact indexing rotary table designed for precise angular positioning in small-part machining and fixture work. Swivelable indexing mechanism 110 mm working diameter 4° per spindle rotation Robust 13.5 kg base weight Accurate indexing that shortens set-up times The VU-100 delivers 4° indexing, which means each full spindle rotation moves the table by a defined angular increment, enabling reliable repeatability for series work. This indexing rotary table simplifies multi‑angle operations by removing the need for manual marking or frequent re‑clamping, translating into measurable time savings on set-up and consistent part quality. The mechanism is designed to provide stable angular stops that support fast changeovers in toolrooms and small production cells. Stable, compact footprint for workshop environments With a 110 mm diameter working face and compact external dimensions of 228 x 177 x 117 mm, the unit occupies minimal bench or machine table space while maintaining stability thanks to a 13.5 kg mass. The weight contributes to vibration damping and steadier cutting behaviour, which is particularly beneficial when machining small or delicate components. The small footprint eases integration into existing jigs and reduces the need for large fixtures, supporting a neater, more efficient workplace layout. Swivel function for flexible machining angles The swivelable design allows angular adjustments beyond simple indexing, opening up tasks such as angled drilling, milling of bevels, and precise orientation for assembly operations. The combination of indexed rotation and swivel capability provides flexibility when alternating between radial and angular work, reducing the number of dedicated fixtures required. This versatility supports both prototyping and batch production by enabling a greater range of operations on a single fixture. Designed for reliable integration and durable use Produced by Vertex, the VU-100 is engineered for routine use in industrial and craft environments where predictable performance matters. The robust construction and defined indexing steps facilitate straightforward integration into manual and semi‑automated processes. Clear mechanical indexing reduces reliance on digital control for simple angular tasks, offering a low‑complexity solution that complements CNC and manual machining alike while helping maintain consistent throughput. For compact, repeatable indexing with the Vertex VU-100, contact Metav Werkzeuge to arrange supply and technical advice via info@metav-werkzeuge.com or by calling +49 2822 7131930 Technical data SKU: VU-100 GTIN: 4061905084782 eClass: 21020590 Manufacturer: Vertex Core dimensions & weights Diameter: 110 mm External dimensions: 228 x 177 x 117 mm Weight: 13.5 kg Index per spindle rotation: 4° Features & compatibility Parts carrier rotary table Swivelable design Compact workshop footprint Suitable for fixture integration FAQ What precision does the indexing provide? The VU-100 offers 4° indexing, enabling consistent angular positioning for repeatable machining and assembly tasks. Can the unit be integrated into existing fixtures? Yes, the VU-100 is designed for straightforward fixture integration thanks to its compact dimensions (228 x 177 x 117 mm) and robust base weight (13.5 kg) which provide stability during machining. Is the swivel function suitable for angled drilling and milling? The swivelable design of the VU-100 supports angled operations such as drilling and milling of bevels, reducing the need for multiple dedicated fixtures. Which manufacturer produces this rotary table? The indexing rotary table is produced by Vertex; the model is listed as VU-100 and is intended for workshop and small production use. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
110mm Three-Point Toggle Clamp Horizontal Base, 10,000N Thrust, Zinc-Plated With Hook - Kukamet
The compact design and robust galvanised finish deliver dependable corrosion resistance and long service life; combined with a 10,000 N clamping capacity and an 11,000 N holding force, the 331 provides secure latching for repetitive industrial use. Order the toggle latch clamp directly via Metav Werkzeuge or ask the consultants for application advice. 331 toggle latch clamp — horizontal-base, galvanised latch with hook The 331 toggle latch clamp is a galvanised, horizontal-base latch designed for secure locking and holding in jigs, fixtures and general workshop applications. Galvanised construction for corrosion resistance 10,000 N clamping force for secure locking Horizontal base for simple fixture mounting Hook included with 11,000 N holding force Consistent clamping force for repeatable production results The latch delivers a defined 10,000 N closing force and an 11,000 N retaining capacity, providing measurable performance for repetitive operations. Precise figures support process planning and quality control; fixture designers gain predictability when balancing clamp positions and forces across an assembly. The mechanical toggle action converts operator effort into a high and stable locking force, making the component suitable for frequent cycle use in production environments. Durable, low-maintenance construction for workshop conditions Manufactured in galvanised steel, the clamp resists corrosion typical in workshop atmospheres and contributes to longer service intervals. The compact mass of 0.86 kg keeps handling straightforward during assembly and replacement, while surface protection reduces the need for frequent refurbishment. The integrated hook provides a positive engagement point that maintains alignment under load, decreasing the risk of accidental release and helping to safeguard operators and assemblies. Simple integration with standard fixtures and jigs A horizontal base mounting simplifies installation on straight clamp rails or flat plates; the threaded connection with 110 mm thread length allows secure fastening and fine depth adjustment. The design supports retrofitting into existing fixtures with minimal modification and enables accurate height setting to match mating parts. The clamp’s profile and mounting arrangement facilitate compact fixture layouts while maintaining clearance for part handling and tooling. Practical choice for industrial and workshop applications Optimised for general clamping tasks, the latch is well suited to welding jigs, assembly stations and inspection fixtures where reliable repeatability is required. The galvanised finish and hook feature combine to offer both durability and positive mechanical engagement, reducing downtime caused by slippage or corrosion. Supplied under the Kukamet range and stocked for dependable delivery, the component supports continuous operation in small workshops and larger production lines alike. Contact Metav Werkzeuge for tailored application guidance and reliable supply of the Kukamet 331 toggle latch clamp, available for prompt dispatch from Emmerich Technical data SKU: 331-5 GTIN: 8682843520963 Material: galvanised steel Mounting: horizontal base Thread length: 110 mm Clamping force (max): 10,000 N Holding force (max): 11,000 N Weight: 0.86 kg Hook: yes Facts Weight: 0.86 kg Thread length: 110 mm Clamping force: 10,000 N Holding force: 11,000 N Features Galvanised finish Horizontal-base fastening Integrated hook Category: Clamps ECLASS: 21041718 ETIM: EC011973 FAQ What materials is this latch suitable for use with? The Kukamet 331 toggle latch clamp is made from galvanised steel and is intended for use with metal fixtures, plates and general industrial jigs. How is the clamp mounted to a fixture? Mounting is via a horizontal-base arrangement; the threaded connection with 110 mm thread length allows secure fastening and fine positional adjustment for the clamp. What holding and clamping forces can be expected? The device provides a clamping force of 10,000 N and a holding capacity of 11,000 N, offering stable locking suitable for repetitive production cycles. Is the hook adjustable or fixed? The latch is supplied with an integrated hook; adjustment is achieved through the threaded connection and fixture geometry to ensure correct engagement. Which SKU should be referenced when ordering spare units? Order spare units using SKU 331-5 to ensure the correct Kukamet toggle latch clamp variant is supplied. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
110mm Three-Point Toggle Clamp With Safety Lock, Horizontal Foot, Black Oxide Finish - Kukamet
Take advantage of the 10,000 N clamping capacity and the integrated safety lock, combined with a horizontal-foot design that supports stable fixture mounting; order the 351 locking lever clamp directly via Metav Werkzeuge or ask our consultants if needed. 351 Locking Lever Clamp (Kukamet) – horizontal foot, safety lock The 351 Locking Lever Clamp is a robust horizontal-foot clamp designed for secure holding in workshop fixtures and assembly jigs. Horizontal foot for stable surface mounting Integrated safety lock for secure clamping Up to 10,000 N clamping force Blackened finish with hook included Dependable clamping performance for uninterrupted production The 351 delivers measurable performance for industrial fixtures: a clamping force of 10,000 N and a holding force of 11,000 N provide dependable restraint for repetitive assembly processes. These forces reduce rework and minimise downtime, translating into more consistent cycle times on the production line. The mechanism is optimised for repeated use, giving a reliable mechanical advantage where secure, repeatable pressure is required. Built for safety and long service life A positive safety lock prevents unintended release, enhancing operator confidence during handling and coarse positioning. The body features a blackened finish that improves surface wear resistance and reduces visible marking on workpieces; the integrated hook increases application flexibility for bespoke fixtures. At approximately 0.945 kg, the clamp combines substantial stiffness with a compact footprint, supporting robust clamping without excessive mass. Practical mounting and straightforward integration The horizontal-foot design enables low-profile installation on jigs and plates, making the clamp suitable for confined setups where lateral space is limited. A thread length of 110 mm enables deep engagement for adjustable spindles or threaded adaptors, allowing simple adaptation into existing tooling. The lever action offers quick engagement and release, which supports faster part handling and smoother workflow in batch production or manual assembly stations. For secure and efficient fixture solutions with the Kukamet 351 locking lever clamp, contact Metav Werkzeuge in Emmerich for product availability and application guidance: info@metav-werkzeuge.com or +49 2822 7131930 Technical Data SKU: B351-5-L GTIN: 8680731508598 Manufacturer: Kukamet Performance Data Clamping force: 10,000 N Holding force: 11,000 N Thread length: 110 mm Weight: 0.945 kg Design & Features Horizontal foot mounting Safety locking mechanism Hook included Blackened finish Category: Clamp (Spanner) FAQ What clamping and holding forces does the 351 provide? The Kukamet 351 locking lever clamp offers a clamping force of 10,000 N and a holding force of 11,000 N, suitable for reliable restraint in industrial fixtures. How is the clamp mounted to a fixture? The clamp is fitted using its horizontal foot, allowing stable surface mounting on assembly plates and jigs for low-profile installations. Does the 351 include a safety mechanism? Yes, the clamp features an integrated safety lock to prevent accidental release during handling or operation. What is the thread length for the spindle? The model provides a 110 mm thread length for the spindle, enabling deep engagement for adjustable attachments or threaded adaptors. What are the weight and surface finish of the clamp? The clamp weighs approximately 0.945 kg and is delivered with a blackened finish; a hook is included for added flexibility. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Secure components with reliable workpiece clamps
Workpiece clamps, also known as workholding clamps or workholding devices, form the essential mechanical interface between machine and part in industrial fabrication. They keep components absolutely play-free, positionally accurate and vibration-resistant during milling, turning, drilling or grinding.
How workpiece clamps ensure process stability
A correctly specified clamping concept transfers the high cutting and feed forces of modern CNC machines into the machine table or spindle without deforming the part. The right combination of mechanical, hydraulic, pneumatic or magnetic solutions enables fast, repeatable setups and supports automated part change where required. Typical applications range from single-part turning to high-volume series milling and complex five-axis machining.
Concrete production benefits at a glance
- repeatable positioning: reduces scrap and rework
- high clamping forces: withstands aggressive cutting without part movement
- reduced set-up time: modular systems and quick-change features speed throughput
- improved surface finish: vibration damping for finer results and tighter tolerances
- flexible compatibility: vices, chucks, clamping plates and zero-point systems for diverse geometries
Why Metav's range is the practical choice
Metav combines decades of specialist know-how with a broad, handpicked range that democratises precision for workshops and industry alike. Based in Emmerich, Metav acts as a quality filter for the European market and supplies more than 250,000 products from precision metrology to complete workshop equipment. With the trust of over 48,000 customers, Metav offers a single-source approach that reduces supplier complexity and secures dependable delivery to your workbench.
Technical data
- function: mechanical interface between machine and workpiece
- primary requirements: absolute positional accuracy; vibration reduction; high clamping forces
- technologies: mechanical, hydraulic, pneumatic, magnetic
- typical components: machine vices; chucks; clamping plates; zero-point systems; pratzen; clamping jaws
- application areas: milling; turning; drilling; grinding; automated part change systems
- production benefits: reduced set-up time; enhanced process security; optimised series and single-part production
The practical summary
Workpiece clamps bring the stability and repeatability required to meet tight tolerances and excellent surface quality, making them indispensable across machining operations. Choosing the right workholding clamps and modular workholding devices is a decisive step towards higher productivity and consistent part quality.
FAQ
What types of workpiece clamps are suitable for automated machining?
Workholding clamps with quick-change modules, hydraulic actuation or magnetic systems are commonly used for automated machining. These workholding devices enable fast, repeatable part changes and integrate with zero-point systems.
How do workpiece clamps affect surface finish and tolerances?
A stable clamping concept minimises vibration and part movement; this improves surface finish and supports achieving narrow tolerances when using high-precision workpiece clamps or workholding devices.
Can the same workpiece clamps handle different part geometries?
Modular workholding clamps and adaptable clamping jaws allow flexible fixturing for varied geometries; combining vices, clamping plates and pratzen increases versatility on the shopfloor.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com