Secure and precise workholding for metalworking productivity
Workholding devices such as workpiece clamps and chuck systems provide absolute positional stability and vibration damping during milling, turning, drilling and grinding, ensuring parts remain free of play under high CNC cutting and feed forces. By transferring clamping loads into the machine table or spindle without deforming the component, a well engineered workholding solution improves machining accuracy, surface finish and process reliability while reducing set-up times. Modular systems from machine vices and chucks to zero-point systems and specialised fixtures enable fast changeovers and support both serial and single-part production, delivering consistent clamping force, repeatability and enhanced throughput.
150mm Horizontal Clamp With Horizontal Foot, Clamping Screw M8×65, Max Thrust 2000 N, Max Holding 3000 N - AMF
Take advantage of the combination of reliable clamping forces and a compact footprint for efficient, repeatable workholding. The horizontal clamp Nr. 6830 (size 4) delivers consistent 2,000 N clamping force and up to 3,000 N holding force, enabling secure fixture in series production or workshop tasks — order via Metav Werkzeuge or consult our specialists for application support. Horizontal clamp Nr. 6830 (size 4) — horizontal foot, adjustable pressure screw (AMF) Horizontal clamp Nr. 6830 (size 4) is a robust horizontal clamp designed for low-profile mounting and secure workholding in industrial and workshop environments Horizontal foot for low-profile mounting 2,000 N clamping force, 3,000 N holding force Adjustable pressure screw M8 x 65 Size 4 with compact 287 mm length Secure, repeatable clamping for production The horizontal clamp provides defined mechanical clamping with a maximum clamping force of 2,000 N and a holding force of 3,000 N, offering consistent results in repetitive operations. The device uses an adjustable pressure screw M8 x 65, which enables fine setting of contact pressure; this is particularly useful when dealing with small tolerances or delicate components. Because the mechanism is a horizontal toggle-style fixture, it converts operator input into stable, locked clamping, reducing the risk of part movement during machining, inspection or assembly tasks. The clear numerical values for clamping and holding forces support process planning and risk assessment in production. Space-saving layout and straightforward integration With a compact L1 length of 287 mm and a dedicated horizontal foot, the clamp occupies minimal bench area while keeping the workpiece accessible. The adjustable clamping range M = 29–43 mm and the vertical working height window (HW min. −4 mm to HW max. 24 mm) permit flexible positioning across varied setups, reducing the need for additional adapters. Such a compact footprint simplifies fixture layouts on milling tables and assembly rigs, enabling denser workholding configurations without compromising accessibility. The concise dimensions facilitate CAD planning and quick verification against fixture templates. Practical handling and quick adjustment for workshop use The device is delivered with an integrated pressure screw and an uncomplicated mounting concept, enabling rapid installation and adjustment. The clamp’s geometry — including reference dimensions A = 10 mm, B = 113 mm and H1 = 75 mm — supports predictable clearance and alignment when combining with other fixtures. Because the mechanism locks positively, bench personnel benefit from a dependable tactile feedback during engagement and disengagement, which contributes to smoother cycle times and fewer reworks. The combination of robust mechanical locking and simple adjustment makes this clamp a pragmatic choice for repetitive production, jigs and manual assembly. For tailored advice on integrating the AMF horizontal clamp Nr. 6830 into specific fixtures or production cells, contact Metav Werkzeuge — call +49 2822 7131930 or email info@metav-werkzeuge.com to discuss compatibility and ordering options Technical data Article number: 4000833510NW Type: 6830 Brand: AMF Product: Horizontal clamp Execution: with horizontal foot Packaging unit: 1 Facts Maximum clamping force: 2,000 N Maximum holding force: 3,000 N Size: 4 Pressure screw: M8 x 65 Overall reference length L1: 287 mm Adjustable range M: 29–43 mm Special features Horizontal foot for low-profile mounting Adjustable pressure screw M8 x 65 Working height range HW min. −4 mm / HW max. 24 mm Reference dimensions for integration: A 10 mm, B 113 mm, H1 75 mm FAQ What is the maximum clamping force of this horizontal clamp? The AMF horizontal clamp Nr. 6830 has a maximum clamping force of 2,000 N and a maximum holding force of 3,000 N, suitable for many light to medium-duty workshop applications. Which adjustment range does the clamp offer for different workpieces? Adjustment is provided by the pressure screw M8 x 65 and the range M 29–43 mm; the working height window is HW min. −4 mm to HW max. 24 mm to accommodate varying part heights. Is the clamp suitable for low-profile mounting on fixture plates? Yes — the clamp features a horizontal foot and compact dimensions (L1 = 287 mm), specifically designed for low-profile bench or fixture-plate mounting. Can the clamp be combined with other fixtures in a modular system? The clamp’s defined reference dimensions (for example A = 10 mm, B = 113 mm) make layout planning straightforward and allow integration with common fixture elements and modular tooling. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm Horizontal Clamp With Massive Holding Arm, 3.65 kN Hold Force, Zinc-Plated - Kukamet
Benefit from robust, repeatable clamping and a compact, galvanised design that supports efficient fixturing with a 150 mm holding arm and up to 3,650 N holding force. Order the Horizontal clamp 112 directly via Metav Werkzeuge or ask our consultants if needed. Horizontal clamp 112 – lever clamp with 150 mm arm by Kukamet The Horizontal clamp 112 is a lever-operated horizontal clamp designed for 90° jigs and fixture applications, featuring a massive holding arm and galvanised steel construction. Lever-operated horizontal clamp for 90° positioning Massive 150 mm holding arm for stable clamping Holding force up to 3,650 N for secure fixturing Galvanised steel construction resists corrosion Reliable force for accurate fixturing The Horizontal clamp 112 delivers a clearly specified holding force of 3,650 N and a clamping force of 3,500 N, values that quantify the clamp’s capability to secure workpieces during machining or assembly. These figures translate into reduced workpiece movement and fewer quality incidents, which supports shorter cycle times and consistent part quality. The lever mechanism provides straightforward actuation; the energy applied at the handle is converted into a stable clamping action, reducing operator effort while maintaining repeatable contact pressure. For workshops that prioritise throughput, this combination of measurable force and simple operation improves process reliability. Compact mounting that fits tight fixture layouts Thanks to the 150 mm holding arm and a vertical foot mounting, this clamp is designed for compact fixture layouts where space and accessibility are limited. The relatively low mass—approximately 0.788 kg—reduces added load on subplates and fixtures, enabling quicker reconfiguration of assembly jigs. The 90° orientation is suitable for right-angle locating and holding, so the component is supported where it most commonly needs restraint. The galvanised finish offers basic corrosion protection, extending service intervals and lowering the need for frequent replacement, which benefits busy production environments that demand dependable, low-maintenance tooling. Durable construction for industrial use Constructed from galvanised steel with a massive holding arm, the clamp is built to withstand repeated cycles in industrial settings. The lever-actuated design minimises backlash and ensures a positive mechanical stop when engaged, which helps maintain part geometry during secondary operations. Because the design focuses on robustness rather than complexity, service and replacement are straightforward, while the compact footprint keeps the clamp versatile for multiple fixture concepts. Overall, the combination of sturdy materials and measured performance makes this clamp suitable for repetitive, high-confidence fixturing tasks. Contact Metav Werkzeuge today to specify the Kukamet Horizontal clamp 112 for fixture projects — Metav’s consultants can advise on mounting variants and delivery directly from Emmerich, call +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data SKU: 112-4-D-C2 GTIN: 8680731500585 Model: 112 Brand: Kukamet EClass: 21041719 ETIM: EC011973 Facts Arm length: 150 mm Angle: 90° Clamping force max: 3,500 N Holding force max: 3,650 N Weight: 0.788 kg Special features Material: Galvanised steel Mounting: vertical foot Massive holding arm Lever-operated clamp Category: Clamp (Spanner) FAQ What applications is this clamp suitable for? The Horizontal clamp 112 is intended for 90° jigs and fixture applications where a lever-operated, horizontal hold is required, making it suitable for machining, assembly and inspection fixtures. How is the clamp mounted to a fixture plate? Mounting is via the vertical foot; the Kukamet Horizontal clamp 112 is designed for secure attachment to subplates or fixture bases using standard fasteners. What do the stated forces mean in practice? The clamping force (3,500 N) refers to the force applied by the clamp when engaged; the holding force (3,650 N) indicates resistance to displacement. These values describe the clamp’s capacity to secure workpieces under process loads. Is the clamp protected against corrosion? Yes, the clamp features a galvanised steel finish, so the Kukamet Horizontal clamp 112 offers basic corrosion resistance suitable for many workshop environments. Can the clamp be used in tight fixture arrangements? The compact arm length of 150 mm and the vertical foot mounting make the clamp well suited for constrained fixture spaces and modular tooling concepts. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
150mm Horizontal Clamp With Massive Holding Arm, 3.65kN Holding Force, 3.5kN Clamping Force, 90° Angle - Kukamet
Benefit from a galvanised, heavy‑duty lever clamp with a massive holding arm and a 3,500 N clamping capacity for consistent, repeatable workholding; order directly via Metav Werkzeuge or consult their specialists for application advice. Horizontal clamp 111 – Kukamet galvanised horizontal lever clamp, 3,500 N Horizontal clamp 111 is a robust horizontal lever clamp designed for secure, repeatable holding in jigs, fixtures and assembly operations. Galvanised body for corrosion resistance Massive holding arm for stable clamping Compact 150 mm arm length 3,500 N clamping capacity Secure clamping that reduces rework The clamp delivers a 3,500 N clamping capacity and a 3,650 N holding force, providing reliable retention during machining and assembly. High clamping and holding values translate into fewer part movements and less rework, which supports higher first‑pass yields. The lever or toggle action converts manual input into strong axial pressure, helping maintain consistent contact between workpiece and fixture throughout a production cycle. Built to last in workshop conditions A galvanised finish protects the clamp against corrosion in workshop environments, extending service life and reducing replacement frequency. The massive holding arm spreads load and resists bending under repeated use, while the horizontal foot allows secure mounting to plates or fixture bases. These design choices lower lifecycle costs and provide confidence in durability when the clamp is subjected to daily mechanical stress. Compact design for straightforward integration With a 150 mm arm and a compact footprint, the clamp is simple to incorporate into existing tooling and fixturing layouts without obstructing access. The unit’s 90° clamping angle suits standard locating and stop arrangements, and the modest mass (approx. 0.782 kg) minimises added inertia on moving subassemblies. Its toggle action enables quick manual operation and repeatable positioning, improving operator ergonomics and cycle times. Reliable choice for production and workshop use This lever clamp combines straightforward mechanics with robust materials to meet common industrial requirements for jigs and fixtures. The horizontal base mounting and the clamp’s mechanical simplicity favour fast installation and low maintenance. Supplied by Kukamet and available through Metav’s distribution, the component benefits from Metav’s quality filtration and broad spare‑parts availability, helping to keep production lines running. Choose Kukamet’s Horizontal clamp 111 for durable, high‑force clamping and contact Metav Werkzeuge in Emmerich for tailored advice via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: 111-4-D-C2 GTIN: 8682843520079 Model: 111 ETIM: EC011973 eClass: 21041719 Core specifications Clamping force: 3,500 N Holding force: 3,650 N Arm length: 150 mm Angle: 90° Weight: 0.782 kg Materials and features Galvanised construction Horizontal foot mounting Massive holding arm Toggle/lever clamp design FAQ What clamping and holding forces does this clamp provide? The Horizontal clamp 111 provides a clamping force of 3,500 N and a holding force of 3,650 N for secure retention in fixtures. Is the clamp suitable for use in humid or workshop environments? Yes, the galvanised finish on the Kukamet horizontal clamp offers corrosion resistance appropriate for typical workshop and assembly conditions. How is the clamp mounted to a fixture or plate? Mounting is via a horizontal foot; the clamp is designed to be fixed to plates or fixture bases in a horizontal arrangement. What is the arm length and operating angle of the clamp? The clamp has a 150 mm arm and operates at a 90° clamping angle, suitable for many standard jigs and stops. Can the clamp be used for both production and manual assembly tasks? Yes, the toggle lever action and compact dimensions make the clamp suitable for both repetitive production workholding and manual assembly applications. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
150mm Horizontal Clamp With Massive Holding Arm, Safety Lock, 3.65kN Hold Force, 3.5kN Clamp Force, 90° - Kukamet
Robust clamping performance through a massive holding arm and integrated safety lock, combined with a horizontal mounting foot and a 150 mm reach, delivers repeatable clamping up to 3.5 kN. Secure production fixtures with dependable holding force and compact mass. Order the Kukamet 111 directly via Metav Werkzeuge or consult our advisors for application-specific guidance. Kukamet 111 Horizontal clamp — 150 mm arm, 3.5 kN clamping force The 111 horizontal clamp is a lever-actuated horizontal clamp engineered for secure, repeatable holding in fixtures, jigs and production tooling. Massive holding arm with safety lock Horizontal base for stable mounting 150 mm reach for deeper clamping Clamping force up to 3.5 kN Holding force 3.65 kN Reliable clamping where consistency matters The lever design and massive holding arm ensure consistent closure force for repetitive applications, reducing setup variation and rework. With a 3.5 kN rated clamping force and a 3.65 kN holding force, this clamp provides the mechanical strength needed for medium-duty production and assembly tasks. The compact mass of 0.73 kg supports lightweight fixture design while maintaining rigidity, so cycle times remain short and process stability improves. Safe operation with integrated locking and stable mounting Operation is optimised for workshop safety and repeatability: the clamp includes a safety lock that prevents accidental release and a horizontal foot for secure, low-profile mounting on base plates. The 90° lever angle gives a clear locked position for visual confirmation, and the mechanism is designed for straightforward manual actuation, helping to reduce operator fatigue and increase throughput in repetitive tasks. Easy integration into fixtures and jigs The 150 mm arm length provides additional reach for deeper workpieces without compromising footprint, allowing the clamp to be incorporated into bespoke tooling or modular fixture plates. The horizontal mounting format simplifies alignment on workbenches and machining tables, and the relatively low weight supports flexible fixturing concepts. The straightforward mechanical design means maintenance is primarily visual checks and occasional lubrication, keeping downtime to a minimum. Durable finish and production-ready reliability Finished in a blackened finish, the clamp resists surface wear and presents a professional, low-maintenance appearance in the workplace. The rugged components and simple, service-friendly mechanism support long service intervals and predictable lifecycle performance. Backed by Metav’s quality filter in Emmerich, the product benefits from documented supply reliability and inspection standards, helping to ensure consistent delivery into production environments. Contact Metav Werkzeuge for specification advice on the Kukamet 111 and secure the right clamp for your fixtures from our Emmerich distribution centre Technical data Article number: B111-4-D-L-C2 ECLASS: 21041719 ETIM: EC011973 Facts Arm length: 150 mm Clamping force: 3,500 N Holding force: 3,650 N Weight: 0.73 kg Angle: 90° Special features Mounting: horizontal foot Finish: blackened finish Design: massive holding arm Safety: integrated safety lock Type: lever-actuated horizontal clamp FAQ What materials is this clamp suited to hold in production fixtures? The Kukamet 111 horizontal clamp is a mechanical clamping element intended to secure a wide range of workpieces within fixtures and jigs; its force ratings (3.5 kN clamping, 3.65 kN holding) make it suitable for common workshop and assembly materials used in medium-duty applications. How is the clamp mounted to a fixture plate? The clamp is supplied with a horizontal foot format for stable mounting; fasteners are applied through the foot to secure the clamp to fixture plates or workbench surfaces according to the intended layout. Does the clamp provide a locked position to prevent accidental opening? Yes, the device features an integrated safety lock that secures the lever in the closed position and reduces the risk of unintended release during handling or machining operations. What is the reach of the clamping arm and how does it affect fixture design? The 150 mm arm reach allows deeper engagement with workpieces, enabling simpler fixture designs for larger or irregular components while maintaining a compact base footprint. Is the finish corrosion resistant for workshop environments? The clamp has a blackened finish that improves surface wear resistance and supports longer service life with basic upkeep; it is suited to typical workshop ambient conditions with regular maintenance. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
150mm Horizontal Clamp With Vertical Base, 3.65 kN Holding Force, 3.5 kN Closing Force, 90° Solid Arm Locking - Kukamet
Take advantage of a robust, galvanised toggle clamp with a 150 mm massive holding arm and a safety locking mechanism for reliable, repeatable workholding. The clamp’s high holding force and compact footprint support efficient jig use and shorter cycle times — order the horizontal clamp directly from Metav Werkzeuge or contact our advisors for specification support. 112 Horizontal Toggle Clamp by Kukamet — galvanised, 150 mm arm The 112 is a horizontal toggle clamp designed for secure workholding in jigs and fixtures, mounted on a vertical base for compact integration into production and assembly processes Galvanised construction for corrosion resistance 150 mm massive holding arm Safety locking mechanism included Holding force up to 3,650 N Improve production reliability with consistent toggle clamping The horizontal toggle design delivers a dependable clamping action that reduces part movement and scrap. The lever mechanism provides a strong mechanical advantage, converting manual input into a high clamping output; with a holding force of 3,650 N and a clamping force of 3,500 N, the device keeps components securely located during machining, welding or assembly. This stability shortens setup times and lowers the risk of rework, contributing to measurable gains in throughput and process quality. The toggle action also offers clear visual and tactile feedback when the clamp is engaged, which supports faster operator cycles and consistent clamping results. Durable construction for harsh workshop environments Constructed from galvanised steel, the clamp is designed to resist corrosion and maintain function in demanding production environments. The massive holding arm provides improved stiffness and wear resistance compared with lightweight alternatives, so clamping points retain alignment over prolonged use. The vertical-foot mounting reduces the assembly footprint while offering a rigid anchor point for jigs and fixtures. The combination of robust materials and straightforward mechanical design means minimal maintenance is required and replacement intervals are extended — a pragmatic choice for workshops aiming to reduce downtime while maintaining high safety and quality standards. Simple integration and enhanced operator safety With a 150 mm reach and a 90° clamping angle, the clamp integrates easily into a variety of fixture arrangements while providing access where space is limited. The safety locking mechanism prevents accidental release under vibration or during incidental impact, increasing operator confidence during repetitive tasks. Its compact mass (approx. 0.73 kg) and standard mounting concept make retrofits and new installations quick to implement, supporting modular jig strategies. The device’s familiar lever-clamp ergonomics also reduce training time for operators, enabling a rapid return on installation and improved consistency across shifts. Choose the Kukamet 112 horizontal toggle clamp for secure and durable clamping — contact Metav Werkzeuge for technical advice or to order directly via info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data SKU: 112-4-D-L-C2 GTIN: 8680731500615 eClass: 21041719 ETIM: EC011973 Facts Arm length: 150 mm Holding force: 3,650 N Clamping force (max): 3,500 N Angle: 90° Weight: 0.73 kg Special features Galvanised material Vertical base mounting Massive holding arm Safety locking mechanism Category: Spanner Storytrigger: lever clamp FAQ What applications is this clamp suitable for? The Kukamet 112 horizontal toggle clamp is suitable for jigs, fixtures, welding and assembly operations where secure, repeatable clamping is required How strong is the clamping action? The device offers a holding force of up to 3,650 N and a maximum clamping force of 3,500 N, providing robust retention for most workshop tasks Is the clamp corrosion resistant? Yes, the galvanised finish ensures corrosion resistance and extended service life in workshop environments How is the clamp mounted? The clamp is designed for vertical base mounting, enabling compact integration into fixture plates and tooling assemblies Does the clamp include a safety feature to prevent accidental opening? A dedicated safety locking mechanism is incorporated to prevent unintended release during vibration or incidental contact Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
150mm Horizontal Clamp With Vertical Base, Heavy Duty Arm, 3.65kN Holding Force, 90° - Kukamet
Take advantage of the combination of a robust 150 mm reach, a vertical-foot mounting and a sustained 3,500 N clamping force for secure, repeatable fixturing in production. Order the clamp directly via Metav Werkzeuge or request technical advice from our consultants for fast, reliable supply to the workshop. Horizontal clamp 112 — vertical-foot lever clamp with 150 mm arm and 3.5 kN clamping force (Kukamet) A Horizontal clamp 112 engineered for secure clamping in assembly, welding and general fixture applications, offering a compact 90° locking position and a durable blackened finish for workshop use. Robust holding arm, 150 mm reach Vertical base for upright mounting Clamping force up to 3,500 N Blackened finish for corrosion resistance Precision holding with measurable force and compact footprint The lever-style clamp provides a clearly defined clamping force and a high holding force, enabling reliable fixation during machining or assembly processes. With a maximum clamping force of 3,500 N and a corresponding holding force of 3,650 N, the device secures components with repeatable pressure while occupying minimal bench space. The compact construction, weighing 0.788 kg, supports tool stations and fixtures where load capacity must be balanced with practical footprint. Robust construction for demanding workshop environments A massive holding arm and a vertical base designed for upright mounting reduce flex and maintain alignment under load, improving process stability and component quality. The arm's 150 mm reach gives access to parts set back from the mounting plane, while a defined 90° locking position simplifies positioning and speeds up cycle times. The blackened finish provides enhanced surface protection and a professional appearance suited to industrial settings. Practical integration and maintenance benefits Engineered for straightforward installation on jigs and benches, the clamp's vertical-foot attachment enables secure bolting and quick alignment. The lever mechanism is service-friendly and, where maintenance is required, the solid components allow targeted inspection and replacement without extensive downtime. The compact toggle design makes the clamp suitable for repetitive applications, offering a balance of robustness and ease of integration into small series production or repair work. For reliable workshop supply and application advice on the Kukamet 112 horizontal clamp, contact Metav Werkzeuge in Emmerich — phone +49 2822 7131930 or email info@metav-werkzeuge.com — for fast delivery and expert consultation. Technical data SKU: B112-4-D-C2 GTIN: 8680731507294 eClass: 21041719 ETIM: EC011973 Brand: Kukamet Facts Clamping force (max): 3,500 N Holding force (max): 3,650 N Arm length: 150 mm Angle: 90° Weight: 0.788 kg Special features Vertical foot mounting Massive holding arm Blackened finish FAQ What is the maximum clamping force of this clamp? The Kukamet horizontal clamp 112 provides a maximum clamping force of 3,500 N and a holding force of 3,650 N for secure fixturing. Can the clamp be mounted upright on a fixture plate? Yes, the clamp features a vertical base designed for upright mounting, making it suitable for fixture plates and benchtop jigs. What reach does the holding arm offer? The holding arm has a 150 mm reach, permitting access to components recessed from the mounting plane. Is the finish suitable for workshop use? The clamp has a blackened finish that improves surface protection against corrosion and is appropriate for industrial workshop environments. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
150mm Horizontal Clamp With Vertical Foot M5 x 30 Pressure Screw 800 N Holding 1100 N - AMF
Take advantage of the combination of compact design, reliable holding performance and straightforward integration into jigs and fixtures for uninterrupted production. The clamp’s vertical foot and clear adjustment range permit flexible mounting and exact workpiece positioning; contact Metav Werkzeuge for tailored advice or to place an order. AMF Horizontal clamp No. 6832 (Size 1) with vertical foot A AMF Horizontal clamp No. 6832 (Size 1) engineered for secure lateral clamping in fixtures and workholding, supplied with a vertical foot for flexible mounting in confined machine or bench setups Compact size 1 for tight fixtures Vertical foot for versatile mounting Max holding force 1,100 N Max clamping force 800 N Consistent clamping power for reliable machining The main benefit of this horizontal clamp is its consistent clamping force, specified at 800 N, combined with a holding force of 1,100 N. These values translate into stable fixation during milling, drilling or light turning operations, reducing the need for rework and improving cycle predictability. The difference between clamping and holding force is important: clamping force is the active pressure applied by the clamp, while holding force indicates the resistance against displacement once the workpiece is engaged. This distinction clarifies why the clamp maintains position under dynamic loads, delivering measurable efficiency gains and fewer interruptions in production. Space-saving mounting with the vertical foot Fitted with a vertical foot, the unit allows mounting where horizontal base access is restricted, making it suitable for tight jigs and modular fixture plates. The compact profile (notably L1 120 mm and H 31.5 mm) keeps the clamp's footprint small while offering an effective clamping width range (HW min. 8 mm to HW max. 15 mm). The integrated M5 x 30 pressure screw ensures fine adjustment of contact pressure without specialised tools, so set-up times are reduced. For workshops that prioritise floor space and quick reconfigurations, this design supports denser fixture layouts and faster changeovers. Simple integration and predictable handling Installation and maintenance are straightforward thanks to the clear mechanical features and standardised fastening. The clamp’s adjustment ranges (for example C 13–14.5 mm, M 23.5–25.5 mm) provide tangible reference points for fixture design and CAD planning, enabling immediate incorporation into existing tooling arrays. The robust mechanical concept offers repeatability across cycles, which supports quality assurance processes and reduces inspection workload. For procurement and engineering teams, the unit’s documented dimensions and forces simplify selection decisions and risk assessments in production planning. For reliable workholding choose the AMF Horizontal clamp No. 6832 from Metav Werkzeuge — contact Metav Werkzeuge for product advice and delivery from Emmerich via eMail info@metav-werkzeuge.com or phone +49 2822 7131930 Technical data Article number: 4123572110NW Type: 6832 Product: Horizontal clamp No. 6832, size 1, vertical foot Product type: Waagrechtspanner (Horizontal clamp) Execution: with vertical foot Manufacturer: AMF Packaging unit: 1 Core figures Max clamping force: 800 N Max holding force: 1,100 N A: 5 mm B: 42 mm C: 13–14.5 mm D: 5.2 mm E: 18.5 mm F: 8 mm H: 31.5 mm H1: 43 mm H2: 49 mm HW min.: 8 mm HW max.: 15 mm I: 10 mm K: 5.5 mm L1: 120 mm M: 23.5–25.5 mm M1: 24.5 mm N: 18 mm O: 5 mm Pressure screw: M5 x 30 Features and versions Size: 1 Vertical foot for alternative mounting orientation Standard pressure screw for simple adjustment Compact footprint for dense fixture layouts Supplied as single unit FAQ What clamping and holding forces does the AMF Horizontal clamp No. 6832 provide? The AMF Horizontal clamp No. 6832 offers a maximum clamping force of 800 N and a maximum holding force of 1,100 N, values that support stable workpiece fixation in many light- to medium-duty machining operations. How is the clamp mounted when it has a vertical foot? The vertical foot allows the clamp to be fastened on a vertical surface or fixture plate, so the clamp body operates horizontally while the mounting surface is vertical; this suits compact jigs and fixtures where base access is limited. Which adjustment range should be considered when planning a fixture? Use the effective clamping width range (HW min. 8 mm to HW max. 15 mm) and dimensions such as L1 120 mm and H 31.5 mm to ensure correct positioning and clearance in the fixture design. Is the pressure screw a standard size for easy replacement or adjustment? Yes; the unit uses an M5 x 30 pressure screw, a standard size that simplifies maintenance, replacements and procurement of spare parts. Can this clamp be used in automated fixtures or only for hand-set jigs? The mechanical characteristics and compact size of the clamp make it suitable for both manual jigs and semi-automated fixtures where mechanical actuation or external actuation systems interface with compact clamping elements. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm Horizontal Clamp With Vertical Foot M6 x 35 Pressure Screw, 1,000 N Clamping Force - AMF
Take advantage of the combination of compact mounting, reliable hold and straightforward integration into fixtures to keep production stable; order the clamp directly via Metav Werkzeuge or consult our specialists for application advice. Horizontal clamp No. 6832, size 2 — horizontal clamp with vertical foot (AMF) The Horizontal clamp No. 6832, size 2 provides secure workholding with a vertical mounting foot for versatile fixture and jig applications in metalworking and general workshop environments. Vertical foot for secure mounting Clamping force 1,000 N Holding force 1,200 N Pressure screw M6 x 35 Compact size for tight fixtures Reliable hold for consistent machining results The clamp delivers a measurable clamping force of 1,000 N and a holding force rated to 1,200 N, values that ensure stable fixation during milling, drilling or light assembly tasks. These force ratings translate into fewer workpiece shifts and reduced rework; the result is higher throughput and predictable quality. The compact dimensions and defined stroke range allow integration into standard jigs and bespoke fixtures without compromising accessibility or tool paths. Flexible mounting and simple adjustment for workshop adaptability Equipped with a vertical foot, the device is designed for direct mounting on fixture plates or tooling blocks where a low-profile horizontal action is required. The built-in pressure screw M6 x 35 permits fine adjustment of the contact point, while the adjustable clamping range (M 29.5–34 mm) supports slightly varying workpiece heights. This combination of features reduces set-up time and simplifies repeatable positioning in series production or single-item jobs. Precise dimensions for predictable integration in assemblies A clear set of measured values supports design decisions when planning fixtures: key dimensions include L1 164 mm, B 64 mm and H1 61 mm, which help ensure predictable clearance and strike zones when multiple clamps are used in close proximity. The adjustable workpiece height span (HW min. 15 mm to HW max. 22 mm) provides the necessary tolerance for different setups while maintaining consistent clamping behaviour. Where reliable repeatability matters, these verifiable specifications make the component straightforward to specify in CAD and on the workshop floor. Contact Metav Werkzeuge today for tailored mounting guidance on the AMF horizontal clamp No. 6832 with vertical foot and secure the right configuration for the production task by emailing info@metav-werkzeuge.com or calling +49 2822 7131930 Technical data Article number: 4123572120NW Manufacturer: AMF Product type: Horizontal clamp (Waagrechtspanner) No. 6832 Execution: with vertical foot Packaging unit: 1 Facts Clamping force max: 1,000 N Holding force max: 1,200 N Size: 2 Pressure screw: M6 x 35 L1: 164 mm B: 64 mm H: 40 mm H1: 61 mm HW min: 15 mm HW max: 22 mm M: 29.5–34 mm A: 6 mm C: 26 mm E: 32 mm I: 13.2 mm Special features Vertical foot for direct plate mounting Compact footprint for tight setups Defined adjustment range for repeatability Suited for fixtures and jigs in metalworking Brand: AMF Type designation: 6832 SKU/UID: 4123572120NW FAQ What clamping and holding forces does the clamp provide? The clamp offers a clamping force of 1,000 N and a holding force of 1,200 N, providing a stable grip suitable for many fixture-based machining operations with the AMF horizontal clamp No. 6832. How is the clamp mounted in a fixture? Mounting is via the vertical foot, allowing direct attachment to fixture plates or tooling blocks; the compact design supports close spacing and multi-clamp arrangements. Which adjustment range is available for workpiece height? The unit accommodates an adjustable workpiece height from 15 mm to 22 mm, with a threaded adjustment range M 29.5–34 mm for precise setting. Is a special pressure screw required for operation? No special screw is required; the clamp uses a pressure screw M6 x 35 as standard for contact-point adjustment and secure pressure application. Can the clamp be specified directly by its dimensions for CAD integration? Yes, the clear dimensional data such as L1 164 mm, B 64 mm and H1 61 mm enable predictable CAD placement and collision checking when planning fixtures with the AMF horizontal clamp No. 6832. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm Horizontal Clamp With Vertical Foot M8 x 45 Pressure Screw 1800N Holding Force 2500N - AMF
The combination of a vertical foot for lateral stability, an M8 x 45 clamping screw and a 2,500 N holding force delivers reliable locating and repeatable clamping in fixtures and jigs; ideal for short production runs and precise assembly tasks. Order the horizontal clamp directly via Metav Werkzeuge or request technical advice from the consultants if needed. Horizontal clamp No. 6832, Size 3 by AMF — vertical foot, M8 x 45 clamping screw The Horizontal clamp No. 6832, Size 3 is a compact workshop clamp with a vertical foot designed for firm lateral support and reliable holding in modular fixturing and bench fixtures. Robust vertical foot for secure clamping M8 x 45 clamping screw included Max holding force 2,500 N Size 3 with compact footprint Secure, repeatable clamping for reliable production The horizontal clamp offers consistent fixture performance thanks to a defined pressing characteristic and high holding capacity. With a 2,500 N holding force and a 1,800 N pressing force, the device is suited to tasks where parts must remain stationary under machining, assembly or inspection loads. The vertical foot increases lateral stability, reducing the risk of lateral movement during operations and therefore supporting reproducible results across multiple setups. For the production engineer, this means fewer rejects and reduced rework. Easy integration into jigs and modular fixtures Critical mounting and functional dimensions are provided to aid straightforward design integration. The clamp includes an M8 x 45 clamping screw, a clear overall length and adjustable range for the clamping jaw, enabling planners to calculate clearances and stroke without guesswork. The functional values specify the contact and travel ranges required for fixture layout, so the clamp can be incorporated into hydraulic-free, mechanically simple systems. For those less familiar with fixture design, holding force specifies the sustained retention under load, while pressing force refers to the initial clamp actuation capability. Practical use cases and workflow advantages Designed for fixture builders and maintenance technicians, the clamp performs well in assembly benches, small-batch machining fixtures and quality-control jigs. The compact footprint and defined height options allow denser station layouts and straightforward interchangeability, which shortens setup times and increases machine utilisation. Selected for robustness and straightforward mechanics, this clamp supports a pragmatic workshop approach: reliable clamping combined with low maintenance demand. For a tailored specification check or to secure reliable supply from Emmerich, request the AMF horizontal clamp No. 6832 through Metav Werkzeuge — technical consultants are available to confirm fit and fixture compatibility. Technical data Article number: 4123572130NW Type: 6832 Product: Horizontal clamp Version: with vertical foot Packaging unit: 1 Manufacturer: AMF Facts Max pressing force: 1,800 N Max holding force: 2,500 N Size: 3 Andrückschraube: M8 x 45 A: 8 mm B: 73 mm C: 25.7 mm D: 6.5 mm D1: 5.1 mm E: 38.5 mm F: 14 mm H: 49 mm H1: 65 mm H2: 86 mm HW min.: 14.5 mm HW max.: 26 mm I: 15 mm K: 7 mm L: 13 mm L1: 206 mm M: 37.5–42.5 mm M1: 42 mm N: 27 mm O: 6 mm Special features Vertical foot for lateral support M8 x 45 clamping screw included Compact design suitable for dense fixtures Label: Waagrechtspanner Nr.6832 Gr.3 senkrechter Fuß AMF Functional for jigs, fixtures and assembly benches FAQ What is the maximum holding force of the clamp? The clamp provides a maximum holding force of 2,500 N for the Horizontal clamp No. 6832, Size 3, ensuring secure retention during machining and assembly. Is the clamping screw supplied with the unit? Yes, the device is supplied with an M8 x 45 clamping screw as specified for the AMF horizontal clamp No. 6832. For which applications is this clamp most suitable? The clamp is intended for modular fixtures, jigs and assembly benches where a compact, mechanically reliable clamping solution is required; it suits short runs and repetitive positioning tasks. How does pressing force differ from holding force? Pressing force (1,800 N for this clamp) refers to the actuation or clamping action applied, while holding force (2,500 N) indicates the sustained retention under load once the workpiece is clamped. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm Horizontal Clamp With Vertical Foot, Max Clamping Force 3,000 N, Max Actuation Force 2,000 N - AMF
Benefit from secure fixture and measurable clamping performance thanks to a 2,000 N pressing force and 3,000 N holding force, combined with a compact vertical foot and an adjustable M8 x 65 pressure screw for precise set-up — order the AMF horizontal clamp directly via Metav Werkzeuge or contact their consultants for procurement and technical advice. Horizontal clamp No. 6832, size 4, vertical foot (AMF) — robust clamping with defined forces The Horizontal clamp No. 6832 size 4 is a machine-fixture clamp with a vertical foot, designed for secure holding in machining and assembly jigs Vertical foot for compact mounting 2,000 N max pressing force 3,000 N max holding force M8 x 65 pressure screw included Precise clamping power for repeatable machining results The clamp delivers clearly specified forces: 2,000 N pressing force for actuation and 3,000 N holding force for static retention. These measurable values make process planning straightforward and reduce variability in setups. For production environments that require consistent cycle times and low scrap rates, a defined pressing value helps calculate required actuator sizes and cycle forces. The robust specification supports predictable fixture behaviour and contributes to improved machining accuracy and reduced rework. Space-saving mounting with a vertical foot for tight fixtures Thanks to its vertical foot, the clamp can be mounted in confined setups or on vertical plates without compromising accessibility. The compact layout and Size 4 designation mean the device fits medium-duty tooling stations and modular fixturing systems. Where bench space is limited or multiple clamps must sit closely together, the vertical-foot design minimises interference and enables denser, more efficient tooling arrangements while maintaining the same clamping performance. Simple adjustment and reliable actuation with standard components Adjustment is straightforward via the supplied M8 x 65 pressure screw, which allows fine setting of contact position and pressure. The clamp’s mechanical arrangement, including the documented adjustment range, supports quick calibration and reduces downtime during job changes. Standardised components such as an M8 pressure screw simplify maintenance and replacement, and make integration with existing fixturing hardware cost-effective and uncomplicated. Practical applications across machining and assembly tasks The clamp is suited to workshop and industrial jigs where secure, repeatable holding is required — for example on milling fixtures, drilling stations or light assembly lines. The clamping range 17.5–46 mm accommodates common workpiece heights and enables flexible use across a range of components. Its combination of robust holding capacity and compact mounting makes it a practical choice for toolrooms, subcontractors and production shops seeking dependable clamping without complex installation. Contact Metav Werkzeuge for procurement and personalised advice on the AMF horizontal clamp No. 6832 — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: 4123572140NW Type: 6832 Product: Horizontal clamp Execution: with vertical foot Manufacturer: AMF SKU: 4123572140NW Packaging unit: 1 Max pressing force: 2,000 N Max holding force: 3,000 N Facts A: 10 mm B: 113 mm C: 41 mm D / D1: 8.5 mm E: 63 mm F: 27 mm H: 66.5 mm H1: 97 mm H2: 115 mm HW min.: 17.5 mm HW max.: 46 mm I: 20 mm K: 8 mm L: 20.5 mm L1: 287 mm M: 52–59 mm M1: 59 mm N: 34 mm O: 8 mm Pressure screw: M8 x 65 Special features Vertical foot for compact installation Clamping range 17.5–46 mm Standard M8 pressure screw Size 4 designation for medium-duty fixtures Clear force specification for planning FAQ What is the maximum pressing force of the clamp? The clamp provides a maximum pressing force of 2,000 N, which is documented for process planning and actuator selection. What holding capacity can be expected once clamped? The device offers a 3,000 N holding force, ensuring secure retention during machining and light assembly operations. Is a pressure screw included and what is its specification? Yes, the unit includes a M8 x 65 pressure screw for adjustment of contact position and clamping pressure. What clamping range does the device cover? The clamp covers a clamping range of 17.5–46 mm, suitable for a wide range of workpiece heights in typical jig applications. Can the clamp be mounted on vertical plates or tight fixtures? The vertical foot design permits compact mounting on vertical plates and in densely populated fixturing setups. Which SKU should be referenced when ordering or enquiring? Reference SKU 4123572140NW and the horizontal clamp No. 6832 when requesting availability or technical details. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm Horizontal/Vertical Dividing Table Three-Point Indexing 20" Readout, MT-2, 3x11mm T-Slots, 40Kg/20Kg Capacity - Vertex
Take advantage of a compact, high-precision indexing solution that combines robust load capacity and versatile mounting for reduced set-up time and dependable repeatability. The combination of a 150 mm diameter working surface, MT-2 spindle taper and dual horizontal/vertical capability supports a wide range of milling and drilling applications. Order the HV-6 directly via Metav Werkzeuge or ask our consultants for tailored integration advice. HV-6 Indexing Rotary Table (Horizontal/Vertical) — 150 mm, MT-2 Mounting by Vertex The HV-6 is a compact indexing rotary table designed for horizontal and vertical setups, providing precise angular positioning for small to medium machining tasks. 150 mm diameter rotary table MT-2 spindle taper mounting Load capacity 40 kg horizontal / 20 kg vertical T-slots 3 × 11 mm Precise indexing for repeatable machining results The compact indexing rotary table delivers fine angular control, with 4° per spindle revolution and a reading of 20", which enables accurate division and positioning for repetitive operations. This level of resolution supports tasks such as hole patterning, gear prototyping and fixture alignment, where repeatability is critical. The machined disc and indexed drive minimise backlash, translating the mechanical settings into stable, measurable outcomes that shorten setup times and reduce scrap rates. Robust load capacity and secure clamping for versatile mounting Built for workshop resilience, the unit accepts a maximum load of 40 kg horizontally and 20 kg vertically, allowing secure workholding of small fixtures and components. The MT-2 spindle taper provides an established mounting standard for direct integration with collets or arbors, while the 3 × 11 mm T-slots on the table surface permit flexible clamp placement. The overall compact footprint (205 × 163 × 78 mm) and a weight of 12.1 kg combine to offer a stable platform that is nonetheless easy to position and clamp to a variety of machine tables. Compact design that supports efficient production workflows With a 150 mm diameter working surface and both horizontal and vertical orientation, the device is suited to confined workspaces and multi-operation benches. The solidity of the construction ensures consistent indexing under load, which reduces the need for repeated adjustments and supports a smoother machining sequence. Compatibility with common mounting standards and a manageable mass make the table a practical choice for job shops and precision workshops seeking to enhance throughput without extensive fixture investment. Opt for Vertex quality with the HV-6 indexing rotary table for compact, repeatable precision — contact Metav Werkzeuge in Emmerich for detailed product information and purchasing: info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: HV-6 GTIN: 4061905086953 ECLASS: 36600610 Manufacturer: Vertex Facts Diameter: 150 mm Height: 80 mm Weight: 12.1 kg Max load: 40 kg horizontal / 20 kg vertical Dimensions: 205 × 163 × 78 mm Indexing: 4° per spindle revolution Reading: 20" T-slot: 3 × 11 mm Special features Mounting taper: MT-2 Orientation: Horizontal and vertical Compact footprint for confined benches Suitable for precision indexing and fixture use FAQ What is the maximum load the table can carry horizontally? The HV-6 supports a maximum horizontal load of 40 kg, specified for stable indexing and secure clamping under normal workshop conditions. Which spindle taper does the rotary table use? The rotary table is supplied with an MT-2 spindle taper for standard arbors and direct mounting options. Can the table be used in both horizontal and vertical setups? Yes, the HV-6 is designed for both horizontal and vertical orientations, enabling versatile fixture layouts and multi-axis operations. What is the usable table diameter for clamping workpieces? The working diameter is 150 mm, providing a compact but practical surface for fixtures and component mounting. How fine is the indexing resolution? Indexing is achieved at 4° per spindle revolution with a reading of 20", offering fine angular control for repetitive machining tasks. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
150mm HSK63 Tool Holder Table Block 15-Slot, Polypropylene, Acid and Coolant Resistant - TECWERK
Take advantage of a compact, chemical‑resistant polypropylene table block that organises HSK63 tool fittings while remaining lightweight and robust; order the tool directly via Metav Werkzeuge or ask our consultants for application advice. Tool holder HSK63 polypropylene table block – 15-place, compact footprint (TECWERK) The tool holder HSK63 polypropylene table block is a compact storage solution designed to keep HSK63 tool fittings organised and protected at the workstation or in CNC toolrooms. HSK63-compatible storage system Polypropylene, chemical-resistant construction Impact- and shatter-resistant design Compact footprint 360 x 245 x 150 mm Lightweight at 360 g Organised storage that speeds up workflow A dedicated table block for HSK63 shanks ensures fast access to frequently used tool fittings, reducing search time and supporting a smoother production flow. The design focuses on clear tool allocation and quick visual identification, which helps standardise tool handling across a bench or toolroom. With a layout for multiple positions, the block improves inventory control and keeps the working area tidy while supporting consistent machining setup routines. Durable, chemically resistant material for workshop use Manufactured from polypropylene, the block combines low weight with high resistance to common workshop fluids. The acid- and coolant-resistant composition means the unit endures exposure to cutting fluids without degrading, while the impact- and shatter-resistant properties reduce the risk of damage during daily handling. For maintenance staff and production teams, this translates into a storage solution that remains serviceable under typical industrial stresses and simplifies cleaning and chemical exposure management. Practical dimensions and ergonomic handling With a compact footprint of 360 x 245 x 150 mm and a gross mass of 360 g, the storage block is easy to position on benches, inside cabinets or close to a CNC machine for immediate access. The moderate size preserves valuable bench space while offering multiple tool positions in a single block, enabling shorter tool-change distances and a neater layout. The lightweight construction supports flexible placement and straightforward repositioning when workflows change. Suitable applications and workshop integration The product is tailored to production and maintenance environments that use HSK63 toolholders, such as CNC workshops, precision maintenance stations and assembly benches. Its polypropylene construction is particularly advantageous where resistance to lubricants and cleaning agents is required. The table block's layout supports orderly tool storage and clear tool identification, aiding setup consistency and lowering the likelihood of handling errors during shift changes or batch operations. For enquiries about suitability, compatibility or delivery of this TECWERK HSK63 storage solution, contact Metav Werkzeuge for expert advice and ordering at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 9000453683NW Manufacturer: TECWERK Product type: Tool holder Dimensions & weight Width: 360 mm Depth: 245 mm Height: 150 mm Weight: 360 g Features & materials Shank type: HSK63 Table block for 15 tool positions Material: Polypropylene Colour: black Acid- and coolant-resistant Impact- and break-resistant FAQ What shank type is this storage block designed for? The storage block is designed for HSK63 shank tool fittings and positions compatible HSK63 holders securely. Is the block resistant to cutting fluids and cleaning agents? Yes, the polypropylene construction is acid- and coolant-resistant, making the block suitable for environments where exposure to lubricants and coolants occurs. How portable is the table block for repositioning at the workbench? At around 360 g, the block is lightweight and easy to move, allowing flexible placement near machines or on benches as workflow requires. Can the block withstand everyday workshop impacts? The unit is specified as impact- and shatter-resistant, providing robust performance under normal handling and reducing the risk of damage. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
150mm Hydraulic Machine Vice With Extra Large Jaw Opening 0.01mm Accuracy, 2500 Kgf Clamping Force - Vertex
Take advantage of consistent hydraulic clamping and a generous 0–200 mm jaw opening to secure larger workpieces with minimal operator effort; the cast iron body and 2500 kgf clamping force deliver stable machining and long-term reliability — order through Metav Werkzeuge or consult their specialists for specification support. VMCH-4 Hydraulic Machine Vice by Vertex — Extra-large opening, hydraulic clamping The VMCH-4 is a hydraulic machine vice designed for workshop and production clamping, offering an extra-large 0–200 mm jaw opening for flexible workpiece handling. Hydraulic clamping for consistent hold Extra-large 0–200 mm opening Made from cast iron for stability High clamping force 2500 kgf Faster cycles through consistent hydraulic clamping The hydraulic actuation provides a reliable and even clamping force that reduces manual intervention and supports higher throughput on repetitive jobs. With a rated 2500 kgf, the vice maintains grip under machining loads, which minimises part movement and rework. The controlled pressure also reduces operator fatigue compared with manual vises, making it suitable for longer production runs where repeatability matters. The design supports a measured accuracy of 0.01 mm, giving confidence where precise alignment is required. Workpiece versatility with an extra-large opening A 0–200 mm opening significantly broadens the range of components that can be secured without auxiliary fixtures. The vice’s cast iron construction provides inherent vibration damping, improving surface finish on milled or drilled parts. Despite its robust build, the unit remains compact enough for integration into common machine tables and benches thanks to its modest footprint and clear external dimensions. This combination of capacity and stability helps streamline setups for irregular or bulky items. Compact footprint and dependable workshop performance Measuring 121 x 435 x 118 mm and weighing 26 kg, the vice balances rigidity with manageable mass for fixed mounting on milling or drilling tables. The compact dimensions save working space while the robust body resists deformation under load, supporting consistent clamping over time. Built for everyday shop use, the construction simplifies maintenance routines and reduces downtime, supporting a predictable supply chain when sourced through Metav’s distribution network. Contact Metav Werkzeuge for tailored advice on integrating the VMCH-4 into production: info@metav-werkzeuge.com | +49 2822 7131930 — local stock and technical consultation from Emmerich ensure rapid supply and reliable delivery Technical data SKU: VMCH-4 GTIN: 4061905083891 ETIM: EC002173 ECLASS: 21020601 Brand: Vertex Facts Opening: 0–200 mm Dimensions: 121 x 435 x 118 mm Weight: 26 kg Clamping force: 2500 kgf Accuracy: 0.01 mm Special features Material: Cast iron Type: Hydraulic Product category: Machine vice Designation: Extra-large opening FAQ What is the jaw opening range of the vice? The vice provides an opening range of 0–200 mm, allowing secure clamping of a wide variety of workpiece sizes. What clamping force can be expected from this hydraulic vice? The vice delivers a clamping force of 2500 kgf, suitable for demanding machining tasks that require steady gripping. Which material is the vice body made from? The body is manufactured from cast iron, chosen for its stability and vibration-damping properties during machining. What are the external dimensions and weight of the unit? External dimensions are 121 x 435 x 118 mm and the unit weighs 26 kg, making it compact yet robust for fixed mounting. How precise is the clamping alignment? The vice is specified with an accuracy of 0.01 mm, supporting applications where tight tolerances are needed. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
150mm Indexing Rotary Table Swivel Three-Point Fixture, 4° Per Spindle Turn, 21.3kg - Vertex
Precision positioning and a compact, swivelling design combine to improve set-up speed and repeatability; benefit from the Ø150 mm table, 4° indexing per spindle turn and a solid 21.3 kg construction — order the VU-150 directly via Metav Werkzeuge or ask our consultants if needed. Vertex VU-150 Swivelling Rotary Table (Ø150 mm) The VU-150 is a swivelling rotary table designed for precise angular positioning and repeatable workholding in machining and inspection environments. Swivelling design for angular positioning Ø150 mm work surface for compact parts Compact footprint 266 x 216 x 140 mm Solid 21.3 kg construction for stability Faster, more repeatable angular indexing for production and inspection The 4° indexing per spindle revolution delivers a predictable step size that simplifies multi-position operations; this resolution translates directly into repeatable angular setups, reducing manual alignment time and lowering scrap rates. Built specifically for workholding tasks, the table enables stable indexing for milling, drilling or measurement sequences, with the clear benefit being fewer reworks and a more consistent production flow. The indexing logic is easy to understand and integrates with established jigging routines, making the unit a practical choice where angular accuracy and process reliability matter. Compact footprint with a stable, vibration‑resistant platform With external dimensions of 266 x 216 x 140 mm and a Ø150 mm working surface, the unit occupies minimal bench or machine table space while offering a solid 21.3 kg mass that increases inertia and reduces vibration during operations. The compact design supports tight workshop layouts and allows machines to be equipped without major alterations to fixturing. The heavier construction contributes to surface finish quality and positional stability, so short-cycle operations and precision measuring tasks benefit from fewer oscillations and better contact consistency. Designed for smooth integration into machining and inspection workflows The swivelling table character is especially useful when angled cuts or inspections are required; the tilt function removes the need for bespoke wedges or time-consuming re-clamping, streamlining changeover. The device is suited to small to medium parts handling where precise angular steps improve throughput. Clear, mechanical indexing means setup is intuitive for technicians familiar with conventional workholding; the component contributes to leaner process sequences and supports production environments that prioritise uptime and predictable cycle times. Durable construction and reliable supply chain assurance Manufactured by Vertex, the unit reflects established engineering standards and is supplied through Metav Werkzeuge, a partner known for consistent availability and quality control in Europe. The combination of proven build quality and a local logistics hub in Emmerich provides both immediate availability and a trustworthy quality filter for buyers. For procurement teams, this alignment reduces supplier complexity and delivers a dependable source for workshop essentials, supporting long-term operational planning. For specific integration advice on the Vertex VU-150 and to discuss compatibility with existing fixturing, contact Metav Werkzeuge at info@metav-werkzeuge.com or by phone on +49 2822 7131930; Metav’s specialists can help determine the optimal configuration for individual workflows Technical data Article number: VU-150 GTIN: 4061905091872 Manufacturer: Vertex Facts Diameter: 150 mm Dimensions: 266 x 216 x 140 mm Weight: 21.3 kg Index per spindle turn: 4° Special features Swivelling rotary table SKU: VU-150 ECLASS: 21020590 FAQ What is the indexing step of the rotary table? The indexing step is 4° per spindle turn, which provides predictable angular increments for repeatable positioning with the VU-150 swivelling rotary table. Which workpiece size is the table suited for? The Ø150 mm work surface of the VU-150 is optimised for small to medium parts where compact, precise positioning is required. How heavy is the unit and why does that matter? The unit weighs 21.3 kg; the mass increases stability and reduces vibration, improving finish quality and positional consistency during machining operations. Can the table be used for both machining and inspection tasks? Yes, the swivelling design and mechanical indexing make the VU-150 suitable for both machining set-ups and metrological inspections that require repeatable angular positions. Who supplies the VU-150 in Europe? The VU-150 is supplied by Metav Werkzeuge and manufactured by Vertex; Metav provides local fulfilment and a consistent quality filter for European customers. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
150mm Machine Vice With Large Opening, 0.01mm Accuracy - Vertex
Take advantage of a robust cast-iron construction combined with a substantial 60 kN clamping force and a wide jaw opening for reliable, repeatable workholding in heavy-duty workshops; order directly via Metav Werkzeuge or contact our consultants for specification support. VQC-160M Mechanical machine vice by Vertex — heavy-duty clamping, wide opening The VQC-160M is a mechanical machine vice engineered for secure workholding in production and workshop environments, designed to handle larger components with a focus on stability and repeatable positioning Robust cast-iron body for high stability Wide jaw opening for large workpieces 60 kN clamping force for secure hold High precision with 0.01 mm accuracy Reliable heavy-duty clamping for uninterrupted production The solid cast-iron body delivers inherent damping and long-term rigidity, making the vice ideal for high-force machining operations where stability matters. With a rated 60 kN clamping force, the device maintains secure contact between workpiece and fixture even under heavy cutting loads; this reduces vibration and tool wear while supporting consistent cycle times. The vice’s mass and construction provide a dependable base for repetitive processes, so setups remain steady across shifts and operators. Accuracy that safeguards component tolerances Precision is central to consistent output: the vice provides 0.01 mm repeatability, ensuring position and orientation remain constant between clamping cycles. In practical terms, this level of accuracy minimises rework, supports tighter machining tolerances and simplifies downstream inspection routines. For teams that run medium- to high-precision production, the combination of robust mechanics and fine positional control translates into fewer rejected parts and a more predictable manufacturing yield. Flexible opening and optional hydraulic operation for faster throughput Featuring a wide jaw opening the vice accepts larger and irregularly shaped workpieces without complex fixturing, speeding up changeovers and reducing auxiliary tooling. An optional hydraulic variant is available for facilities that prefer power-assisted clamping to shorten cycle times and standardise clamp forces across many operations. This adaptability makes the vice suitable for both manual loading benches and semi-automated production cells where consistent clamping force improves repeatability. Built for workshops that demand dependable service and expert backing The design emphasises durability and straightforward maintenance: robust components and accessible contact surfaces reduce downtime and ease cleaning and inspection. Backed by Metav’s approach to democratising precision, this vice pairs industrial capability with an uncomplicated supply chain and expert advice from a specialised partner. The result is a practical workholding solution that supports both everyday workshop needs and the demands of serial production. For bespoke advice on integrating the VQC-160M into existing workflows, contact Metav Werkzeuge in Emmerich for technical consultation and local supply — eMail: info@metav-werkzeuge.com • Tel: +49 2822 7131930. Technical Data SKU: VQC-160M GTIN: 4061905083884 Type: Mechanical EClass: 21020601 Facts Jaw opening: 0–305 mm Dimensions: 170 x 584 x 165 mm (L x W x H) Weight: 67 kg Clamping force: 60 kN Accuracy: 0.01 mm Special features Body material: cast iron Large jaw opening for oversized parts Optional hydraulic operation available Brand: Vertex FAQ What is the maximum jaw opening and how does it affect part size? The vice offers a 0–305 mm jaw opening, which allows the VQC-160M to clamp larger or irregular components without extensive fixturing, supporting greater part flexibility on the shop floor. Can the vice provide consistent clamp force during long production runs? Yes, the mechanical design delivers a stable 60 kN clamping force; the optional hydraulic variant standardises clamp force further for extended production cycles. Is the VQC-160M suitable for precision machining tasks? The vice’s 0.01 mm repeatability makes the VQC-160M appropriate for many precision tasks, reducing setup variation and supporting tighter dimensional control. What materials is the vice body made from and why does that matter? The body is cast iron, chosen for its rigidity and vibration damping; this improves surface finish and tool life when machining under high loads. How heavy is the vice and what does that mean for mounting? At approximately 67 kg, the vice presents a stable clamping base; secure machine table mounting is recommended to maximise rigidity and repeatability. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
150mm Machine Vise 2,500 kgf Clamping Force 0.01 mm Accuracy, 478x296x160mm - Vertex
Take advantage of the combination of high clamping force, fine repeatability and sturdy construction for efficient workholding; order the vice directly via Metav Werkzeuge or consult the team for application-specific advice. VD-675 Machine vice — 2500 kgf clamping force, 0–190 mm opening (Vertex) A VD-675 machine vice designed for secure workholding in machine-tool environments, ideal for milling, drilling and machining tasks that require stable clamping and precise repeatability. Robust 2500 kgf clamping force Wide 0–190 mm jaw opening Precision to 0.01 mm for repeatable work Solid 42 kg construction for stability Hold larger workpieces reliably for uninterrupted machining The VD-675 is engineered to deliver consistent holding power with a 2500 kgf rated clamping force and a 0–190 mm jaw opening, enabling secure fixation of medium to large components. The combination of strong clamping and substantial mass reduces vibration and chatter, which helps to protect cutting tools and improves surface finish. In practical terms, fewer re-clamps and less downtime translate into higher throughput and predictable process moments. Achieve repeatable accuracy and reduce rework With a claimed accuracy of 0.01 mm, this vice supports high-precision setups where tolerances matter. Repeatability in clamping position lowers the need for constant recalibration between operations; the result is fewer scrapped parts and shorter set-up times. The accuracy figure should be interpreted as a guide to the vice’s capability for repeatable positioning in standard machine setups, where toolpath consistency and fixture stability are essential. Built to remain stable under load and over time The unit’s solid construction and mass (42 kg) provide inherent resistance to movement under cutting forces, improving stability without complex anchoring schemes. A heavier vice transfers energy away from the workpiece and into the machine base, so rigidity is gained through weight and geometry rather than elaborate maintenance. The mechanical design is straightforward, promoting reliable day-to-day use and predictable maintenance intervals. Practical fit for workshop and production environments Designed as a classic machine vice for toolroom and production use, the model adapts to common machining processes and fixtures. Its range of opening and rated clamping capacity make it suitable for a variety of components while the mechanical simplicity ensures easy integration into standard machining centres. For tailored fixture advice or to confirm compatibility with specific setups, consult Metav’s technical advisors who can match the vice to the application. Contact Metav Werkzeuge today for tailored advice and a quotation for the Vertex VD-675 machine vice; phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data Article number: VD-675 Name: Machine vice Type: Mechanisch GTIN: 4061905091742 ETIM: EC001959 eCl@ss: 21020601 Facts Opening range: 0–190 mm Dimensions: 478 x 296 x 160 mm Weight: 42 kg Clamping force: 2500 kgf Accuracy: 0.01 mm Special features Brand: Vertex Designation: Maschinenschraubstock Gallery images: va-5-detail.jpg, va-5-technische-zeichnung.jpg FAQ What is the maximum jaw opening of this vice? The vice offers a jaw opening of 0–190 mm, allowing accommodation of a wide range of component sizes for machining operations. How much clamping force does the vice provide? Clamping is rated at 2500 kgf, providing strong fixation for machining processes that generate significant cutting forces. What repeatability can be expected from the vice? The vice is specified with an accuracy of 0.01 mm, which supports repeatable positioning in standard machine-tool applications. Is the unit heavy enough to improve machining stability? Yes, with a mass of 42 kg the vice contributes to machine stability, reducing vibration transfer and helping to maintain surface quality. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
150mm Magnetic Chuck Round Rapid-Action Holding, 9.8kg - Vertex
Take advantage of compact, repeatable clamping with the 150 mm round design and a sturdy 78 mm profile for reliable setups; order directly via Metav Werkzeuge or request tailored advice from our consultants. Vertex VGD-06 Magnetic Chuck — round, 150 mm diameter The VGD-06 magnetic chuck is a compact round workholding plate designed for precision clamping in general workshop and light machining environments. Compact 150 mm diameter Stable 78 mm height construction Robust mass for vibration damping Designed for precise workholding Consistent precision through magnetic clamping Magnetic chucks convert a controlled magnetic field into a repeatable clamping force, eliminating many mechanical variables associated with mechanical jaws. The VGD-06 delivers a stable holding surface across its 150 mm diameter, which translates into fewer repositioning steps and more consistent part geometry during sequential operations. For projects where traceable repeatability matters, the magnetic principle reduces chatter and supports tighter run-out tolerances, making this device a pragmatic choice for shops seeking measurable improvements in cycle-to-cycle accuracy. Space-saving design that supports efficient workflows A compact footprint combined with a 78 mm profile allows the unit to integrate into constrained machine beds and small workstations without compromising performance. The chuck’s intrinsic mass—approximately 9.8 kg—adds damping that counters minor vibration during cutting or grinding, helping to preserve surface finish and tool life. The round form factor simplifies orientation and mounting for rotary or indexing applications, so changeovers become quicker and the machine uptime increases, supporting leaner production sequences and reduced handling times. Supply reliability and industrial provenance Sourcing the VGD-06 through Metav Werkzeuge connects buyers with a supplier that emphasises accessibility to precision. Metav’s presence in Emmerich acts as a practical “quality filter” for the European market, combining a broad catalogue with dependable logistics. This relationship supports predictable stock levels and transparent order handling, which is particularly valuable for procurement teams who require steady supply and verified origin. The combination of a well-proven clamping principle and a trustworthy distribution channel contributes to lower operational risk and steadier shopfloor performance. Discuss technical suitability and availability with Metav Werkzeuge — request a specification review for the Vertex VGD-06 magnetic chuck via info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: VGD-06 GTIN: 4061905083488 Dimensions & weight Diameter: 150 mm Height: 78 mm Weight: 9.8 kg Features & classification Brand: Vertex Shape: round eCl@ss: 21020809 FAQ What materials can be clamped on this magnetic chuck? The VGD-06 magnetic chuck is intended for ferromagnetic parts; non-magnetic materials require suitable fixturing or backings to enable magnetic clamping. How does the chuck reduce setup time compared with jaw clamping? By using a uniform magnetic field across its surface, the chuck offers faster part placement and repeatable orientation, which commonly shortens fixturing steps compared with individual mechanical clamps. Can the VGD-06 be mounted on small lathes and mills? The compact 150 mm diameter and 78 mm height make the unit suitable for smaller machine beds where a round, space-efficient clamping solution is required. Is the magnetic field switchable for safe part loading? The VGD-06 is built as a magnetic workholding plate; switching or control options depend on the specific chuck model and any associated control accessories — consult the technical specifications for details. What logistical support does Metav provide for this product? Metav Werkzeuge maintains European distribution and aims to ensure clear order processing and reliable supply, supporting predictable procurement and delivery timelines. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
150mm Magnetic Chuck With Fine Pole Distribution, 28 N Magnet Force - Vertex
Take advantage of the combination of precise clamping with a fine pole distribution, a compact 50 mm profile and reliable magnetic holding to keep production running smoothly; order directly via Metav Werkzeuge or contact our consultants for tailored advice. VGF-1515BS Magnetic Clamping Plate (fine pole distribution) by Vertex A VGF-1515BS magnetic clamping plate designed to offer dependable, compact workholding where a fine pole distribution is required for precision tasks in metalworking and toolrooms Fine pole distribution for secure clamping Low-profile design: 50 mm height Robust magnetic force: 28 Solid build weight: 9 kg Secure, repeatable clamping with fine pole control The fine pole distribution provides a uniform magnetic field across the face, enabling reliable support for small to medium-sized ferrous components. This arrangement reduces point loading and improves flatness during machining, so setups remain consistent over repeated cycles. The design is aimed at improving process stability through a more even holding surface, translating into fewer reclamps and reduced secondary operations for better throughput. Compact form for easier machine integration With a 50 mm profile and a mass of 9 kg, the plate offers a low centre height and inherent stability that suits machines with limited clearance. The compact dimensions allow straightforward mounting on conventional tables while keeping the workpiece close to the spindle axis, which helps to maintain alignment and minimise vibration. The compact footprint also simplifies handling and storage in busy workshop environments. Clear performance specification and safe handling The rated magnetic force: 28 expresses the unit's holding capacity as supplied; this characteristic supports confident selection for appropriate tasks and faster job planning. Built for routine industrial use, the clamping plate emphasises straightforward operation and predictable behaviour under load. When paired with established workholding protocols, the result is improved cycle efficiency and consistent part quality, making it a pragmatic choice for demanding production environments. Contact Metav Werkzeuge to discuss how the Vertex VGF-1515BS magnetic clamping plate can integrate into existing setups and to request a detailed specification or quote Technical data Article number: VGF-1515BS GTIN: 4061905094972 Manufacturer: Vertex Facts Height: 50 mm Weight: 9 kg Magnetic force: 28 Type: BS Special features Fine pole distribution SKU: VGF-1515BS eClass: 21020809 FAQ What materials is the clamping plate suitable for? The VGF-1515BS magnetic clamping plate is intended for ferrous workpieces where magnetic holding is effective, utilising its fine pole distribution to support smaller features. How does the fine pole distribution benefit precision work? A finer pole pitch on the VGF-1515BS spreads the magnetic field more evenly, reducing local deformation and enabling more consistent machining results. What are the mounting dimensions and profile? The plate has a low profile with a height of 50 mm, designed for compatibility with standard machine tables and fixtures. Is the magnetic force value sufficient for heavy milling? The specification lists a magnetic force of 28, which should be assessed alongside workpiece geometry and machining forces to determine suitability for heavy operations. Who manufactures this magnetic clamping plate? The product is manufactured by Vertex and supplied under the SKU VGF-1515BS for traceability and specification matching. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
150mm Magnetic Chuck With Fine Pole Distribution, 30 N Magnet Force - Vertex
A compact, high-precision clamping solution that combines a very fine pole distribution, consistent holding force and space-saving dimensions to support repeatable machining. Benefit from stable workpiece fixation, reduced setup time and a reliable supply chain — order the magnetic chuck directly via Metav Werkzeuge or consult the team for application advice. VRTW-1535A Magnetic chuck by Vertex — 150 x 350 mm, fine pole distribution The VRTW-1535A is a compact magnetic chuck designed for precision clamping of small to medium workpieces in milling, grinding and general workshop applications. Very fine pole distribution for precise gripping Compact size 150 x 350 mm for small workpieces Strong magnetic force: 30 for reliable hold Reduced setup time through predictable clamping performance The finely divided pole layout delivers a consistently distributed magnetic field that minimises slippage and distortion during machining. With a very fine pole distribution, the clamping surface supports small and irregularly shaped components while maintaining a low profile. This results in shorter adjustment cycles and fewer refixtures, which in turn improves throughput on repetitive tasks. The design therefore supports stable process parameters and measurable productivity gains in serial and job-shop environments. Durable hold and straightforward handling for daily workshop use Built to provide a reliable holding force across the full plate, the clamping plate keeps parts secure during medium-duty milling and grinding operations. The compact footprint of 150 x 350 mm and a height of 50 mm make the unit suitable for benches and machine tables with limited space, without compromising accessibility. The permanent magnetic system ensures immediate clamping without auxiliary power; maintenance is limited to routine cleaning and inspection, delivering operational simplicity and long-term dependability. Versatile integration into existing workflows and quality routines The magnetic clamping plate integrates into typical machining sequences as a quick-change fixture option that reduces fixturing complexity. Its repeatable positioning supports dimensional stability and simplifies alignment checks during setup and quality control. Combined with Metav’s supply reliability and technical advice, this solution helps workshops achieve consistent results while centralising procurement and support. Documentation and asset imagery are available for specification checks prior to purchase. Contact Metav Werkzeuge in Emmerich for tailored application guidance and to secure the Vertex magnetic chuck that fits precise clamping requirements Technical data SKU: VRTW-1535A GTIN: 4061905086236 eClass: 21020809 Facts Dimensions: 150 x 350 mm Height: 50 mm Weight: 21 kg Magnetic force: 30 Special features Very fine pole distribution Article image: vrtw-1018a-main.jpg Brand: Vertex FAQ What materials can be clamped with this magnetic chuck? The magnetic clamping plate is optimised for ferrous materials; the VRTW-1535A secures steel and similar workpieces reliably due to its finely distributed pole pattern. How does the fine pole distribution affect machining results? A finer pole pitch provides more contact points and a more even magnetic field, which reduces local deformation and improves stability during cutting and grinding operations. Is the unit suitable for small, irregular parts? Yes. The fine pole layout of this magnetic chuck supports smaller and irregularly shaped components, improving grip and reducing the need for complex mechanical fixtures. Can the plate be used on smaller machine tables? The compact 150 x 350 mm footprint and 50 mm height make it suitable for smaller tables or benches where space is restricted while still offering effective clamping. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
150mm Mini Cross Table XG Precision, 150x100mm Travel - SAIM
Compact 150 x 100 mm platform and low 68.5 mm profile deliver space-saving precision; combined with a light 6 kg body the unit integrates easily into measurement benches or compact machine tools. Benefit from a reliable miniature cross table that supports accurate manual positioning — order via Metav Werkzeuge or consult the technical team for integration advice. Kreuztisch Mini – SAIM miniature cross table with 150 x 100 mm platform, low-profile 68.5 mm The Kreuztisch Mini is a compact cross table designed for precise manual XY positioning in confined workspaces, suitable for metrology benches, small assembly stations and laboratory jigs. Compact 150 x 100 mm travel surface Low overall height 68.5 mm Lightweight 6 kg for easy integration Fits compact workstations for efficient layout The miniature cross table delivers a compact footprint with a 150 x 100 mm travel surface, enabling dense workstation layouts and efficient use of bench space. A reduced height of 68.5 mm keeps the centre of gravity low, which improves stability when the stage is mounted beneath microscopes or measurement fixtures. For production planners and lab managers, the space savings translate into easier integration with existing fixtures and fewer modifications to machine guarding or optical axes. The simple mechanical design supports steady manual adjustments without adding unnecessary bulk. Low profile enhances accuracy and simplifies alignment A low-profile construction contributes to stable mounting and consistent setup across repeated tasks. By keeping the stage close to the base, alignment between tool, probe or optical axis is simplified; this lowers the likelihood of parallax or mounting-induced error in routine measurements. The compact stage is a good match for tasks that require repeatable, controlled XY movement without the need for large travel ranges. The combination of low profile and compact travel supports reliable manual positioning for inspection, fine machining or assembly alignment. Lightweight design reduces handling time and retrofit effort Weighing 6 kg, the miniature cross table is straightforward to handle during installation and re‑positioning, which reduces downtime when switching fixtures or moving equipment between benches. The modest mass also lessens load on smaller carriers or motorised stages when used in hybrid setups, and it eases transport for mobile metrology rigs. The lightweight construction therefore contributes to faster changeovers and a more flexible workshop layout, keeping productivity high where frequent configuration changes are normal. Practical choice for metrology, electronics and optics applications Designed as a straightforward manual XY stage, the product suits metrology work, component assembly and optical alignment tasks that demand precise relative movement within a small envelope. The compact construction and clear numerical specification of platform size make planning and CAD integration uncomplicated: the 150 x 100 mm surface and 68.5 mm height provide deterministic space requirements for fixtures and clamps. Where digital feedback or motorisation is not required, this miniature cross table offers a durable, low‑complexity positioning solution. Contact Metav Werkzeuge for a tailored technical consultation and a customised quotation for the SAIM miniature cross table (SKU SAIM-150XG) to ensure optimal integration into the production or inspection line Technical data Article number: SAIM-150XG GTIN: 4061905082498 Label: Kreuztisch Mini ECLASS: 21041714 Facts Platform dimensions: 150 x 100 mm Overall height: 68.5 mm Weight: 6 kg Special features Brand: SAIM Assets available: saim-150x-technische-zeichnung.jpg, saim-150x-xg-modelle.jpg FAQ What are the exact platform measurements of this stage? The platform measures 150 x 100 mm as stated for the SAIM miniature cross table (SKU SAIM-150XG), suitable for compact fixturing and small components. Is the stage height suitable for microscope integration? With a low profile of 68.5 mm, the stage is designed to sit close to the base and is well suited for integration beneath microscopes and optical systems where a reduced working height is beneficial. How heavy is the unit for handling and retrofit tasks? The cross table weighs 6 kg, which keeps handling straightforward during installation and supports flexible repositioning in workshops and labs. Can this stage be motorised or fitted with digital feedback? The SAIM miniature cross table is a manual XY stage; options for motorisation or feedback are not specified in the supplied data. For retrofitting possibilities, consult Metav Werkzeuge for compatible solutions. Which applications are typical for this miniature cross table? Typical uses include metrology benches, small assembly and inspection stations, electronics alignment and optical setup tasks where precise manual XY positioning in a small footprint is required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm Morse Taper Adapter Quick-Change, MT2 - Vertex
Take advantage of a compact, reliable tool-holding solution that combines stable clamping with straightforward compatibility. With its MT2 interface and lightweight design, the holder supports efficient changeovers and predictable run-out performance — order directly via Metav Werkzeuge or contact our consultants for tailored advice. Vertex VI-102 Morse taper holder – MT2 tool compatibility, compact design A VI-102 Morse taper holder for accurate tool mounting in workshop and light production environments Compact MT2 taper interface for standard tooling Stable clamping for consistent concentricity Lightweight construction for easy handling Stable toolholding for repeatable results The VI-102 is designed to deliver consistent concentricity when used with tools fitted to an MT2 taper. Stable clamping reduces vibration and contributes directly to better surface finish and longer tool life, which improves process reliability and lowers scrap rates. The emphasis on repeatable geometry makes this taper holder suitable where predictable tool run-out is essential for small-batch production and precision repair work. The design supports straightforward mounting and removal while preserving alignment between the spindle and cutting or measuring tool. Faster setup, less downtime A compact taper holder shortens tool-change procedures and helps maintain productivity on busy shop floors. By providing a secure interface for standard Morse taper tooling, the device minimises the need for repeated alignment and reduces setup times between operations. Improved handling and quick seating of the taper enable technicians to focus on the machining task rather than on fixturing, which supports a smoother workflow and higher machine utilisation. The result is an operational advantage in environments that value speed and consistent output. Practical workshop benefits and compatibility Weighing just 0.6 kg, this taper holder is easy to manoeuvre and store without occupying valuable bench space. The straightforward design ensures compatibility with commonly used MT2 tooling and accessory systems, enabling a flexible tool assortment with minimal adaptation. For users requiring clarification on machine suitability or assistance integrating this holder into existing setups, Metav's technical team is available to provide guidance and additional measurements to ensure the component meets operational requirements. For personalised advice or to arrange supply from Metav Werkzeuge’s Emmerich warehouse, please contact our consultants at info@metav-werkzeuge.com or call +49 2822 7131930 — Metav’s team will advise on compatibility and dispatch options Technical Data Article number: VI-102 GTIN: 4061905083969 Category: Vertex Facts Weight: 0.6 kg Shank type: MT2 eClass: 21029015 Special features Morse taper holder Compatible with MT2 tool shanks SKU: VI-102 Image: https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/b3/2f/97/63/63972fb3c806fb82109e33ce/vi-102-main.jpg FAQ Which shank size does this taper holder accept? The VI-102 accepts tools with an MT2 shank and is intended for direct seating in matching spindles or adaptors. Is the holder suitable for high-speed spindles? The VI-102 is designed for standard workshop and light production use; suitability for high-speed applications depends on spindle characteristics and operational parameters. What is the weight of the taper holder? The taper holder has a weight of 0.6 kg (SKU VI-102), making it easy to handle and store. How does the holder affect tool run-out? When correctly seated, the taper holder improves repeatability and helps maintain concentricity for consistent machining results. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
150mm Parallel Gauge Block Set Ground, Hardened Alloy Steel, 18 Pieces - Vertex
Benefit from the combination of hardened, ground alloy steel, 0.01 mm accuracy and a versatile 18-piece range for reliable workholding; order the set directly via Metav Werkzeuge or consult our specialists for application advice. VP-118A Parallel Block Set (ground) by Vertex — hardened alloy steel, 18-piece The VP-118A is a ground parallel block set designed for accurate levelling and stable clamping in machining and workshop applications. Hardened, ground alloy steel Accuracy of 0.01 mm for fine alignment Complete 18-piece set for versatile clamping Standard 150 mm length on each parallel Consistent machining results through precision alignment The set delivers repeatable alignment thanks to 0.01 mm accuracy, which reduces setup variation and shortens cycle times in batch work. Manufactured from alloy steel, each bar is hardened and subsequently ground, producing flat, parallel faces that keep tolerances stable under repeated clamping. In practice, this precision translates into fewer reworks and more predictable downstream processes, an important benefit for production environments that value throughput and part consistency. Durable construction for everyday workshop use A focus on robust materials and finishing makes these parallels a long-term asset. The ground finish resists wear and retains a consistent reference surface, so alignment does not drift with normal shop use. The construction supports frequent handling and simple cleaning without compromising the contact faces, which means less downtime for maintenance and more reliable fixture setups for milling, drilling and inspection stations. Practical set configuration to simplify fixturing Delivered as an 18-piece kit with standard 150 mm length parallels in a range of heights, the set covers common clamping scenarios without needing multiple separate purchases. The combination of sizes permits stacked arrangements and fine height adjustment for irregular raw stock, reducing the time spent searching for suitable support blocks. This pragmatic range is particularly useful for job shops and maintenance departments that require flexibility from a single compact set. Built to integrate with workshop workflows The parallels support both manual and machine-mounted setups and are well suited where stable workpiece support is required for precise machining or measurement. By offering a clear, verifiable specification and a compact set of options, the product helps technicians make faster fixturing decisions and maintain process quality. The result is greater confidence at the workbench and improved overall equipment effectiveness. Contact Metav Werkzeuge for availability, technical advice and tailored recommendations for the VP-118A parallel block set — reach us at info@metav-werkzeuge.com or by phone on +49 2822 7131930 to discuss suitability for specific applications Technical data SKU: VP-118A GTIN: 4061905093432 Manufacturer: Vertex EClass: 21170610 Core data Accuracy: 0.01 mm Weight: 5.8 kg Total pieces: 18 Standard length: 150 mm Materials & features Alloy steel, hardened and ground Ground finish (geschliffen) Set contents: 2x 8.5×14×150 mm, 2x 8.5×16×150 mm, 2x 8.5×20×150 mm, 2x 8.5×24×150 mm, 2x 8.5×30×150 mm, 2x 8.5×32×150 mm, 2x 8.5×36×150 mm, 2x 8.5×40×150 mm, 2x 8.5×44×150 mm FAQ What level of accuracy can be expected from the parallel blocks? The VP-118A parallel block set provides an accuracy of 0.01 mm, ensuring tight alignment tolerances for precise fixturing and measurement tasks. Which material are the parallels made from and how are they finished? The parallels are made from alloy steel and are hardened and ground to give a durable, wear-resistant reference surface suitable for repeated workshop use. How many pieces are included and what lengths are provided? The set contains 18 pieces in total; each parallel has a standard length of 150 mm with a range of heights from 14 mm to 44 mm as listed in the set contents. Are these parallels suitable for use in both hand and machine setups? Yes. The ground faces and robust construction of the VP-118A make them suitable for manual clamping as well as for use in machine fixtures where stable support and repeatability are required. Can the set be used for precise inspection tasks alongside machining? The ground, hardened surfaces and 0.01 mm accuracy make the VP-118A appropriate for support during inspection procedures where a reliable datum is needed. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
150mm Parallel Gauge Block Set, Ground, S45C Steel, Accuracy 0.01mm, 14 Pieces - Vertex
Take advantage of the combination of precision-ground surfaces, 0.01 mm tolerance, and a flexible 14-piece configuration to speed up set-up and secure repeatable alignment. Order the set directly via Metav Werkzeuge or consult our specialists if technical advice is required. Parallel shim set VP-168 — precision-ground S45C shims, 14-piece set by Vertex A precision-ground Parallel shim set VP-168 for accurate workholding, shimming and alignment in machine shops and toolrooms. Precision-ground with 0.01 mm tolerance Flexible 14-piece configuration for varied setups Manufactured from durable S45C carbon steel Stable total mass for slip-resistant placement Make setup measurable with repeatable accuracy The set delivers a measurable improvement in alignment thanks to its 0.01 mm accuracy on ground faces. This level of precision reduces trial-and-error during fixturing and shortens cycle time for part set-up. The precision-ground finish ensures parallel surfaces that sit flat and remain true under light clamping, providing consistent reference planes for tooling and inspection tasks. Measurable tolerances support quality control and reduce rework. Flexible configuration for diverse clamping and shimming tasks With a 14-piece set arranged in graduated thicknesses, the kit allows fine incremental adjustments when shimming or packing workpieces. Each bar is sized for modular stacking and rapid combination, enabling quick adaptation to different workpiece geometries. The assortment format improves workflow efficiency in fixtures and vices, while the solid construction supports repeated handling without dimensional drift. Use the set to simplify alignment, height matching and parallel spacing across a range of jobs. Robust material and handling for daily workshop use Made from S45C carbon steel, the components balance hardness and machinability for long service life in workshop environments. The overall mass of the set contributes to stability when placed in fixtures, minimising movement during manual operations. Ground faces resist deformation from normal clamping forces; routine cleaning and light oiling maintain surface condition. The construction suits regular industrial use and integrates easily into inspection benches and tool cabinets. For precision alignment and reliable fixturing, order the Vertex VP-168 through Metav Werkzeuge or contact Metav Werkzeuge in Emmerich for expert setup advice and local supply Technical data Article number: VP-168 SKU: VP-168 GTIN: 4061905094064 Material: S45C Weight: 3.5 kg Dimensions: 225 x 200 x 90 mm Accuracy: 0.01 mm Pieces per set: 14 Facts Contents: 2x 6.8x15x150 mm Contents: 2x 6.8x18x150 mm Contents: 2x 6.8x21x150 mm Contents: 2x 6.8x25x150 mm Contents: 2x 6.8x27x150 mm Contents: 2x 6.8x31x150 mm Contents: 2x 6.8x35x150 mm Special features Precision-ground surfaces Set for alignment, shimming and spacing Durable carbon steel construction Stable total weight for secure placement Manufactured by Vertex FAQ What tolerance can be expected from the parallel shims? The Parallel shim set VP-168 is ground to an accuracy of 0.01 mm, providing consistent reference faces for precise fixturing and inspection. Which material are the shims made of? The set is manufactured from S45C carbon steel, chosen for a balance of toughness and dimensional stability under regular workshop use. How does the 14-piece configuration support different tasks? Graduated thicknesses in the 14-piece set allow incremental stacking and fine adjustment for shimming, height matching and aligning components in vices and fixtures. Is the set suitable for inspection benches and toolrooms? Yes; the ground faces and robust construction make the set suitable as a reference for inspection benches, toolrooms and repetitive fixturing tasks. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
150mm Parallel Gauge Block Set, Hardened Ground Alloy Steel, 18 Pieces - Vertex
Combine the hardened, ground alloy-steel construction, precise 0.01 mm accuracy and a comprehensive set of sizes for reliable, repeatable workholding. Order the set directly via Metav Werkzeuge or contact the consultants for tailored advice. VP-200 Parallel support set (ground) by Vertex — hardened alloy steel, 0.01 mm accuracy The VP-200 Parallel support set is a ground, hardened collection of precision parallels and support brackets designed for accurate setting, inspection and workholding in machine shops and metrology routines. Hardened, ground alloy steel Accuracy 0.01 mm Complete set of 18 pieces Includes support brackets for stability Consistent setup precision for repeatable results The VP-200 set provides reliable setup precision thanks to its hardened and ground surfaces and a stated 0.01 mm accuracy. Ground faces minimise contact deformation and ensure parallelism across the set, which in turn reduces measurement error and increases repeatability during clamping or inspection tasks. In practice, this means quicker validation of parts, fewer re‑setups and lower scrap rates when aligning components or transferring references between machines. The robust construction also keeps calibrated geometries stable over repeated use. Versatile size range to streamline fixture preparation A well matched assortment of parallels and supports shortens preparation time at the vice or inspection plate. The set comprises a spectrum of widths and heights plus two support brackets, enabling flexible stacking and stable bearing under clamping pressure. This comprehensive size range simplifies spacing, elevating and aligning workpieces so operations run more efficiently. For users who require consistent datum surfaces across different part geometries, the kit reduces the need to improvise with unsuitable supports and increases throughput by making fixturing predictable. Workshop durability and trustworthy sourcing for industrial use Manufactured from alloy steel, hardened and finished by grinding, the set is built for everyday workshop conditions where resilience matters. The mass and finish of the components contribute to stable contact under load, giving long service life and low maintenance overheads. Sourcing through Metav Werkzeuge adds an extra layer of assurance: established supply from Emmerich acts as a quality filter for the European market and supports reliable replenishment. Together, material choice and responsible distribution reduce downtime and help maintain production rhythm. For precise, repeatable set-ups choose the Vertex VP-200 parallel support set — contact Metav Werkzeuge in Emmerich for expert advice and reliable supply: info@metav-werkzeuge.com / +49 2822 7131930 Technical data Article number: VP-200 GTIN: 4061905094071 Manufacturer: Vertex Facts Accuracy: 0.01 mm Weight: 15.6 kg Dimensions: 355 x 318 x 85 mm Pieces per set: 18 Special features Material: alloy steel, hardened and ground Content: parallels in varied sizes and two support brackets Set type: ground parallel support set FAQ What applications are suitable for these parallels? The VP-200 parallel support set by Vertex is suited to machine shop workholding, inspection tasks and any application needing precise, stable datum surfaces. How does the 0.01 mm accuracy affect everyday use? An accuracy of 0.01 mm ensures that stacking and aligning with the VP-200 produces consistent reference planes, reducing setup variance in subsequent machining or measurement steps. Are the parallels resistant to workshop wear? Yes — the components are made from alloy steel, hardened and ground, which provides durability and maintains contact geometry under regular clamping loads. Can the set be combined for taller workpiece supports? The included parallels and support brackets are intended for stacking and stable support; correct stacking procedures maintain the stated accuracy and stability. Is this set supplied as a complete kit ready for immediate use? The VP-200 is delivered as a complete kit containing parallels in a range of sizes plus two support brackets for immediate integration into workshop routines. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
Secure components with reliable workpiece clamps
Workpiece clamps, also known as workholding clamps or workholding devices, form the essential mechanical interface between machine and part in industrial fabrication. They keep components absolutely play-free, positionally accurate and vibration-resistant during milling, turning, drilling or grinding.
How workpiece clamps ensure process stability
A correctly specified clamping concept transfers the high cutting and feed forces of modern CNC machines into the machine table or spindle without deforming the part. The right combination of mechanical, hydraulic, pneumatic or magnetic solutions enables fast, repeatable setups and supports automated part change where required. Typical applications range from single-part turning to high-volume series milling and complex five-axis machining.
Concrete production benefits at a glance
- repeatable positioning: reduces scrap and rework
- high clamping forces: withstands aggressive cutting without part movement
- reduced set-up time: modular systems and quick-change features speed throughput
- improved surface finish: vibration damping for finer results and tighter tolerances
- flexible compatibility: vices, chucks, clamping plates and zero-point systems for diverse geometries
Why Metav's range is the practical choice
Metav combines decades of specialist know-how with a broad, handpicked range that democratises precision for workshops and industry alike. Based in Emmerich, Metav acts as a quality filter for the European market and supplies more than 250,000 products from precision metrology to complete workshop equipment. With the trust of over 48,000 customers, Metav offers a single-source approach that reduces supplier complexity and secures dependable delivery to your workbench.
Technical data
- function: mechanical interface between machine and workpiece
- primary requirements: absolute positional accuracy; vibration reduction; high clamping forces
- technologies: mechanical, hydraulic, pneumatic, magnetic
- typical components: machine vices; chucks; clamping plates; zero-point systems; pratzen; clamping jaws
- application areas: milling; turning; drilling; grinding; automated part change systems
- production benefits: reduced set-up time; enhanced process security; optimised series and single-part production
The practical summary
Workpiece clamps bring the stability and repeatability required to meet tight tolerances and excellent surface quality, making them indispensable across machining operations. Choosing the right workholding clamps and modular workholding devices is a decisive step towards higher productivity and consistent part quality.
FAQ
What types of workpiece clamps are suitable for automated machining?
Workholding clamps with quick-change modules, hydraulic actuation or magnetic systems are commonly used for automated machining. These workholding devices enable fast, repeatable part changes and integrate with zero-point systems.
How do workpiece clamps affect surface finish and tolerances?
A stable clamping concept minimises vibration and part movement; this improves surface finish and supports achieving narrow tolerances when using high-precision workpiece clamps or workholding devices.
Can the same workpiece clamps handle different part geometries?
Modular workholding clamps and adaptable clamping jaws allow flexible fixturing for varied geometries; combining vices, clamping plates and pratzen increases versatility on the shopfloor.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com