Secure and precise workholding for metalworking productivity
Workholding devices such as workpiece clamps and chuck systems provide absolute positional stability and vibration damping during milling, turning, drilling and grinding, ensuring parts remain free of play under high CNC cutting and feed forces. By transferring clamping loads into the machine table or spindle without deforming the component, a well engineered workholding solution improves machining accuracy, surface finish and process reliability while reducing set-up times. Modular systems from machine vices and chucks to zero-point systems and specialised fixtures enable fast changeovers and support both serial and single-part production, delivering consistent clamping force, repeatability and enhanced throughput.
150mm Parallel Gauge Set 20 Pieces Includes 2 of Each 3×13–3×41×150mm - Vertex
Take advantage of precise parallel shims, a wide size range and compact storage for efficient setup and repeatable setups on the shop floor. Order the set directly via Metav Werkzeuge or consult the team for application advice. VP-018 Parallel shim set with metric sizes and compact tray The VP-018 parallel shim set is a workshop-grade spacer system for aligning and levelling components during fixturing, setup and inspection tasks. 20-piece precision shim set Sizes from 3 to 41 mm in steps Compact storage tray 290×230×73 mm Total weight 2.5 kg Maintain machine alignment and repeatability with precision shims The VP-018 delivers controlled spacing and parallelism where surgical accuracy is required. Each shim is designed for consistent thickness and edge geometry so that alignment and repeatability are improved during assembly, set-up and tool changes. Using a systematic shim strategy reduces time spent on iterative adjustments and supports faster changeovers in production environments. The clear size progression from narrow to wider shims enables fine incremental corrections without adding complex tooling or adjustments. Broad size range for flexible fixturing and set-up Containing two pieces of each width between 3 mm and 41 mm, all with a 150 mm length, the set covers common workshop needs for shimming, spacing and parallel support. This variety allows rapid selection of the required cross-section to correct small misalignments or to build accurate stacked thicknesses for bespoke setups. The ability to combine shims to achieve precise incremental heights reduces reliance on custom-made spacers and supports versatile use across jigs, fixtures and inspection fixtures. Practical storage for tidy workstation workflow The compact tray, measuring 290×230×73 mm, keeps all components organised and protected, making the set easy to transport between machines or to a bench for inspection tasks. A defined location for each shim size speeds up retrieval and return, which contributes to a neater workplace and fewer lost parts. Storing components systematically lowers downtime caused by searching for the right spacer and supports consistent process control in routine operations. Engineered for dependable workshop performance Manufactured under the Vertex range, the set is intended for regular use in workshop environments and bench-level precision tasks. The overall mass of 2.5 kg balances portability and robustness for everyday handling. By integrating this shim set into standard operating procedures, calibration and maintenance cycles become more predictable, lowering the risk of misalignment-related rework and keeping production quality consistent. Contact Metav Werkzeuge for tailored advice on integrating the Vertex VP-018 parallel shim set into existing workflows or to request additional technical details from our specialists at Metav Werkzeuge in Emmerich Technical data Article number: VP-018 GTIN: 4061905084225 eClass: 21170610 Customs tariff number: 73182200 Data Dimensions: 290×230×73 mm Weight: 2.5 kg Pieces per set: 20 Special features Contents: two shims each of widths 3 mm to 41 mm, length 150 mm Product type: parallel shims for height and spacing adjustments Packaging dimensions: 290×230×73 mm FAQ What is included in the VP-018 set? The VP-018 set contains two shims of each width from 3 mm to 41 mm, all 150 mm long, supplied in a compact storage tray for organised workshop use. Can the shims be used for fixture levelling and alignment? Yes, the VP-018 parallel shim set is intended for levelling, spacing and alignment tasks in jigs, fixtures and during machine set-up. Is the VP-018 suitable for mobile usage between machines? The compact tray and a total weight of 2.5 kg make the VP-018 convenient to carry between benches and machines while keeping components organised. How does the size range support fine adjustments? The set’s graded widths enable incremental stacking to achieve precise heights without bespoke spacers, allowing accurate corrections and repeatable setups. Which brand manufactures this shim set? The VP-018 is manufactured by Vertex and designed for reliable workshop performance within industrial and trade applications. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
150mm Parallel Gauge Set Ground, Hardened Alloy Steel, 0.01mm Accuracy - Vertex
Take advantage of the combination of high precision, hardened and ground alloy steel construction and a comprehensive 28-piece range to speed up machine set-up and fixture alignment; order the set directly via Metav Werkzeuge or consult our product specialists for application advice. VP-128A parallel shim set by Vertex — hardened & ground, 0.01 mm accuracy The VP-128A parallel shim set supplies a hardened, ground selection of parallels designed for precision fixturing and setup work in machine shops and toolrooms. Hardened, ground alloy steel construction High precision ±0.01 mm accuracy Complete 28-piece set, 150 mm length Robust 10.7 kg workshop set Keep tolerances under control with reliable precision The set is engineered to deliver consistent precision during clamping and alignment operations. With an accuracy of 0.01 mm, the collection of parallels allows repeatable shimming between machine table and workholding devices, reducing set-up time and scrap rates. The precisely ground faces ensure true contact and even pressure distribution, which means faster machine warm-up to production tolerances and more predictable results in serial work. Built for everyday workshop use and long service life Constructed from hardened and ground alloy steel, the components withstand the rigours of the shop floor while retaining flatness and surface finish. The substantial set weight and solid material choice contribute to stability when used under vises or alongside clamping fixtures. The finish minimises surface deformation during tightening, so integrity of the setup is preserved and frequent replacements are avoided, supporting uninterrupted production. Versatile composition for a wide range of setups The 28-piece set is organised to cover typical clearance and height requirements in fixturing: every piece measures 150 mm in length and comes in a mix of widths and thicknesses to bridge gaps and set exact heights quickly. The selection simplifies incremental adjustment and enables fine-tuning without improvised spacers. Because the set is grouped and graded by dimension, locating the right shim is efficient, helping reduce machine downtime between jobs. Practical handling, storage and quality assurance The parallels are supplied as a matched set to support orderly storage and rapid selection during changeovers. The ground surfaces resist fretting when paired with hardened tooling, and routine cleaning plus light oiling after use maintains performance. Metav’s European distribution centre acts as a quality filter for the market, ensuring that delivery and stock consistency meet industrial expectations, so workshops receive tools that perform to specification and last. For purchasing or technical clarification on the Vertex VP-128A set, contact Metav Werkzeuge for tailored advice and reliable supply to your workshop bench Technical data Article number: VP-128A GTIN: 4061905093715 Manufacturer: Vertex Core data Accuracy: 0.01 mm Weight: 10.7 kg Dimensions: 390 x 292 x 82 mm Pieces per set: 28 Length per piece: 150 mm Special features Material: hardened and ground alloy steel Set composition: 2x 10x14x150 mm, 2x 10x16x150 mm, 2x 10x18x150 mm, 2x 10x20x150 mm, 2x 10x22x150 mm, 2x 10x24x150 mm, 2x 10x26x150 mm, 10x28x150 mm, 2x 10x30x150 mm, 2x 10x32x150 mm, 2x 10x35x150 mm, 2x 10x40x150 mm, 2x 10x45x150 mm and 2x 10x50x150 mm Ground faces for uniform contact Suitable for fixturing and precision set-up FAQ What level of accuracy can be expected from these parallels? The VP-128A parallel shim set from Vertex achieves an accuracy of 0.01 mm, making it suitable for precision fixturing and repeatable set-up tasks in toolrooms and production environments. What material are the shims made from and how does that affect performance? The set is made of hardened and ground alloy steel, which provides wear resistance and dimensional stability; the material choice supports reliable clamping without rapid surface degradation. Which sizes are included in the set and how long are the parallels? Contents include a graded selection from 14 mm up to 50 mm widths at 150 mm length per piece as listed in the technical data, arranged to offer fine incremental adjustments during set-up. Are these parallels suitable for routine workshop clamping and precision measurement setups? Yes, the design and finish of the VP-128A make the collection appropriate for both routine clamping and precision alignment tasks where true contact and minimal variation are required. How should the parallels be stored to maintain their flatness and finish? Store the parallels dry, in their organised set, and apply a light protective oil after cleaning; keeping them stacked or loose with contaminants can cause surface marks and reduce repeatability. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
150mm Parallel Gauge Set Pairwise Ground, Hardened, Size Marked, 0.01mm Pair Tolerance - AMF
Take advantage of a durable, case‑hardened construction and pairwise plan‑parallel grinding for consistent setups; combined with clear size markings and a compact wooden box, the set streamlines fixture preparation and repeatable adjustments. Order the AMF Parallel shim set Nr. 6347S directly via Metav Werkzeuge or ask our consultants if needed. AMF Parallel shim set Nr. 6347S — 150 mm standard length, 14 pairs Parallel shim set Nr. 6347S for precise height compensation and fine adjustment tasks in metalworking, toolmaking and precision setup applications. Standard wooden case with removable lid Case-hardened for durable wear resistance Pairwise ground and plan‑parallel accuracy Size markings and 0.01 mm pair tolerance Consistent, measurable accuracy for precise setups The set delivers reliable precision through pairwise fine grinding that ensures plan‑parallel contact faces and a documented pair tolerance of 0.01 mm, making it suitable where repeatability matters. Such tight control of thickness minimises cumulative error when stacking shims during fixturing or measurement tasks, so setups remain within predictable limits and rework is reduced. The result is faster alignment and fewer inspection iterations on the production floor. Robust treatment for long service life and stable reference A case‑hardened finish provides wear resistance and maintains contact surfaces under repeated use, preserving the original thickness and surface integrity over time. This hardening reduces the need for frequent replacement and helps maintain stable reference heights in jigs and fixtures. The mechanical resilience therefore contributes directly to lower downtime and a steady quality output in everyday workshop operations. Organised handling and straightforward identification Each shim carries size markings to speed selection and limit handling errors, while the wooden box with a removable flap lid keeps the components protected and readily accessible at the bench. Clear labelling and neat storage reduce search times during set‑up changes, improving workflow efficiency in busy environments. The compact storage solution supports tidy tool stations and faster job changeovers. Conformity and traceable tolerances for quality assurance Nominal tolerances are applied in accordance with DIN ISO 2768m, ensuring dimensional consistency across the set and compatibility with standardised tooling workflows. Where a tight pair tolerance is required, this conformity simplifies inspection and documentation processes, supporting quality control regimes and audit trails. The combination of standardised tolerances and precise manufacturing aids verification and integration into certified production processes. For workshop‑grade precision and dependable durability, contact Metav Werkzeuge to secure the AMF Parallel shim set Nr. 6347S and receive expert advice from our Emmerich team. Technical Data Article number: 4123321010NW Type: Nr. 6347S Product: Parallel shim set Brand: AMF Core data Length: 150 mm Content: 14 pairs Pair tolerance: 0.01 mm Packaging unit: 1 Special features Case-hardened Pairwise ground and plan‑parallel Size markings on each shim Wooden box with removable flap lid Nominal tolerances according to DIN ISO 2768m FAQ What accuracy can be expected from these shims? The AMF Parallel shim set Nr. 6347S provides a documented pair tolerance of 0.01 mm, ensuring high repeatability for stacking and fine adjustments. How is the set supplied and stored? The set is supplied in a wooden box with a removable flap lid; each shim is marked for easy identification and organised storage. Are the dimensional tolerances standardised? Yes, nominal tolerances for the set comply with DIN ISO 2768m, providing traceable conformity for quality assurance and integration into standard workflows. Is the construction suitable for frequent workshop use? The case‑hardened treatment and ground surfaces of the AMF set offer wear resistance and stable reference dimensions under repeated handling. Can the shims be used for precise fixture adjustments and measurement setups? Designed for height compensation and setup tasks in metalworking and toolmaking, this parallel shim set serves as a reliable element for precise fixture and measurement preparations. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm Pneumatic Clamp Three-Point, Vertical Base, 3,000 N Thrust, Galvanised Massive Holding Arm - Kukamet
The combination of a massive holding arm, a 150 mm reach and a galvanised finish delivers reliable clamping for repetitive fixture tasks; this ensures stable production and lower rework rates. Order the clamp directly via Metav Werkzeuge or consult our advisers for application-specific recommendations. Pneumatikspanner 651 — Pneumatic clamp with 150 mm reach and galvanised finish (Kukamet) The Pneumatikspanner 651 is a vertical-foot pneumatic clamp designed for fixture and assembly applications, providing robust 90° clamping and high holding performance in machining and production environments. Massive holding arm for rigid clamping 150 mm reach for larger workpieces Galvanised finish for corrosion resistance Vertical-foot mounting, 90° clamping angle Robust clamping where repeatability matters The clamp offers a massive holding arm combined with a vertical-foot mounting, giving fixtures a stable base and minimising deflection during repeated cycles. The design translates into consistent part positioning and fewer rejects, which supports higher overall equipment effectiveness. By integrating a 90° clamping orientation, the unit suits standard tooling plates and jigs, reducing the need for complex rework. The galvanised surface enhances resistance to coolant and workshop humidity, prolonging service intervals and reducing downtime. Fast set-up and secure force transmission With a 150 mm reach and clear separation between actuation and clamping interfaces, the device streamlines set-up in modular fixturing systems. The pneumatic actuation allows for quick engagement and release, while the specified force capacities ensure secure fixation of medium-duty components. The combination of an actuation force of 3,000 N and a holding force up to 3,300 N supports reliable retention during machining and light assembly operations. The simple footprint of the vertical foot eases retrofitting into existing fixtures without extensive rework. Low-maintenance durability for workshop use Constructed in galvanised steel, the clamp resists corrosion in workshop conditions and requires only routine inspection of pneumatic connections and seals. The solidly built arm minimises wear at the contact points, resulting in longer intervals between part replacement. For maintenance teams, the straightforward mechanical layout simplifies checks and spares handling, helping to keep mean time to repair low and preserving production flow. Integration into production and safety considerations The clamp has been engineered for safe integration into automated sequences and manual fixtures alike. Its defined 90° clamping angle and vertical-base mounting support predictable kinematics, which simplifies risk assessments and guarding plans. When combined with suitable pressure regulation and tubing, the device can be incorporated into central pneumatic systems for coordinated actuation across multiple stations, improving throughput while maintaining operator safety. Contact Metav Werkzeuge for tailored advice on specifying the Kukamet Pneumatikspanner 651 with 3,300 N holding force for specific fixtures — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: 651-4-D-C2 Brand: Kukamet Category: Spanner ECLASS: 21021004 ETIM: EC011973 Core specifications Arm length: 150 mm Max actuation force: 3,000 N Max holding force: 3,300 N Clamping angle: 90° Design and features Galvanised material Massive holding arm Vertical-foot mounting Suitable for fixture and assembly use FAQ What maximum holding force does the clamp provide? The Kukamet Pneumatikspanner 651 provides a maximum holding force of 3,300 N, ensuring secure retention for many medium‑duty workshop applications. Is the clamp suitable for wet or coolant‑exposed environments? The clamp’s galvanised finish improves corrosion resistance, making the unit well suited to environments with occasional coolant exposure or higher humidity. How is the device mounted to a fixture plate? The unit uses a vertical‑foot mounting, allowing secure bolting to standard fixture plates and straightforward integration into existing jigs. Can the reach accommodate larger fixtured parts? With a 150 mm arm, the clamp offers extended reach for larger workpieces and provides greater flexibility in positioning clamping points. Does the clamp require specialised maintenance tools? Maintenance is routine: inspection of pneumatic connections and seals plus occasional checks of the clamping interface; no special tools are typically required. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
150mm Pneumatic Clamp With 3,000N Thrust, 3,300N Hold Force, Horizontal Foot, Massive Holding Arm, Galvanised - Kukamet
Reliable clamping for small to medium production runs is achieved through the combination of a galvanised construction, a 150 mm solid holding arm and a holding capacity of 3,300 N; order the Pneumatic Clamp directly via Metav Werkzeuge or consult our specialists for application advice. 611 Pneumatic Clamp by Kukamet — 3,300 N holding force, 150 mm arm A 611 Pneumatic Clamp designed for robust horizontal mounting and precise, repeatable production clamping. Galvanised steel construction 150 mm robust holding arm Horizontal foot mounting Up to 3,300 N holding force Consistent clamping performance for production workflows The 611 Pneumatic Clamp delivers a combination of measured clamping and secure holding that supports repeatable processes on assembly lines and jigs. With a maximum clamping force of 3,000 N and a holding force of 3,300 N, the device is suited to applications where parts must remain fixed while machining, welding or inspection takes place. Pneumatic actuation ensures rapid cycle times and consistent force application; the controlled air-driven mechanism reduces force variance compared with manual levers, helping to lower rework rates and improve throughput. Space-saving mounting with stable support Designed for horizontal foot mounting, the clamp integrates into confined fixture setups without compromising accessibility. The 150 mm holding arm provides reach while keeping the overall footprint compact; the arm’s massive construction stabilises workpieces and resists torsion under load. The device’s 95° operating angle is optimised for lever-style engagement, allowing secure clamping in tight assemblies where vertical clamps would obstruct tooling or handling. Corrosion-resistant materials and reduced upkeep Constructed from galvanised components, the clamp is protected against corrosion in workshop environments, which extends service intervals and maintains functional aesthetics. The robust arm and hardened internal elements are selected to withstand repeated cycles; as a result, downtime for replacement is minimised and the total cost of ownership is reduced. Where occasional cleaning and inspection are performed, the protective finish preserves contact surfaces and prevents premature wear, keeping fixtures stable over extended production runs. Safe integration and clear specification for engineers The clamping device is specified with measurable performance figures so planners and engineers can design fixtures with confidence. The pneumatic action allows controlled engagement that can be integrated with existing air systems and valve logic. Clear numeric values for reach, angle and force simplify FEM checks and safety assessments: the difference between the maximum clamping force (3,000 N) and the maximum holding force (3,300 N) reflects how the device acts under dynamic and static conditions, respectively, and should be considered when calculating workpiece retention under cutting or handling loads. For dependable clamping from Kukamet, contact Metav Werkzeuge in Emmerich for exact application guidance and fast supply — eMail info@metav-werkzeuge.com or call +49 2822 7131930 to discuss fitment and delivery options Technical data Article number: 611-4-D-C2 Brand: Kukamet Classification: eClass 21021004 ETIM: EC011973 Key figures Arm length: 150 mm Max clamping force: 3,000 N Max holding force: 3,300 N Operating angle: 95° Materials & features Material: galvanised steel Mounting: horizontal foot Type: pneumatic lever clamp Notable feature: massive holding arm FAQ What is the difference between clamping force and holding force for this clamp? Clamping force refers to the peak pneumatic force available during engagement (3,000 N), while holding force describes the static retention capacity after engagement (3,300 N) for the 611 Pneumatic Clamp from Kukamet. Is the clamp suitable for use in a corrosive workshop environment? Yes, the galvanised finish of the Kukamet 611 Pneumatic Clamp provides corrosion resistance suitable for standard workshop conditions, reducing maintenance frequency. How is the clamp mounted to a fixture or jig? The clamp is designed for horizontal foot mounting; the horizontal base is fixed to the fixture plate and the arm operates across the workpiece at a 95° angle. Can the pneumatic clamp be integrated into automated valve controls? Pneumatic actuation allows integration with standard air valves and control systems; the device’s consistent actuation profile supports automated cycle programming. What are the key physical features that provide stability under load? The clamp’s massive holding arm and galvanised construction ensure rigidity and resistance to torsion, providing stable support during machining and assembly operations. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
150mm Pneumatic Clamp With Vertical Handle And Massive Holding Arm, 3,000N Push / 3,300N Hold, 90° - Kukamet
Take advantage of the vertical handle and solid holding arm combined with a zinc‑plated, heavy‑duty build to secure repeatable clamping and reduce downtime; order the clamp directly via Metav Werkzeuge or consult the team for application advice. Pneumatic Clamp 651 — Kukamet, vertical handle and massive holding arm The Pneumatic Clamp 651 is a vertical‑foot pneumatic toggle clamp engineered for secure 90° workholding in production, assembly and fixture applications. Vertical handle with solid holding arm Zinc‑plated corrosion protection Max clamping force 3,300 N 90° clamping angle, 150 mm arm Improve repeatability with pneumatic actuation and robust mechanics The pneumatic actuation delivers consistent cycle‑to‑cycle performance, converting a piston force of 3,000 N into a maximum holding force of 3,300 N, which supports dependable repeatability in batch production. The vertical operating axis and vertical handle provide a compact actuation path that reduces variation during clamping, while the stiff solid holding arm resists deflection under load. This combination ensures fixtures remain true to datum, lowering rework rates and stabilising throughput. Built for long service life and straightforward integration Constructed from zinc‑plated material and fitted with a massive holding arm, the clamp resists corrosion and mechanical wear typical in workshop environments. The vertical foot mounting facilitates firm attachment to jig plates and fixture bases, while the 150 mm arm offers sufficient reach for most standard components without adding bulk. The 90° clamping angle simplifies part orientation in assembly processes, and the compact footprint aids integration into existing tooling layouts for minimal retrofitting effort. Faster cycles and safer handling to boost productivity Pneumatic operation shortens actuation times versus manual clamps, supporting higher cycle rates and smoother line balancing. The vertical grip design encourages ergonomic handling for manual set‑up or intermittent interventions, reducing operator fatigue. Robust construction reduces unplanned stoppages, and the clear mechanical action of the toggle design improves safety by offering predictable clamp behaviour under pressure. The clamp’s specification suits repetitive production where speed and reliability matter. For reliable production clamping choose the Kukamet Pneumatic Clamp 651—contact Metav Werkzeuge for specification support and fast supply from Emmerich. Technical data SKU: 651-4-H-D-C2 Product name: Pneumatic Clamp 651 Brand: Kukamet Facts Max piston force: 3,000 N Max holding force: 3,300 N Arm length: 150 mm Clamping angle: 90° eCl@ss: 21021004 ETIM: EC011973 Special features Material: zinc‑plated Vertical handle and solid holding arm Vertical foot mounting Robust construction for industrial use Designed for 90° clamping FAQ What clamping forces are available with this clamp? The Kukamet Pneumatic Clamp 651 (SKU 651-4-H-D-C2) provides a piston force of 3,000 N and a maximum holding force of 3,300 N, suitable for many production fixtures. How is the clamp mounted in a jig or fixture? The Pneumatic Clamp 651 is supplied for vertical foot mounting, enabling secure attachment to jig plates and fixture bases for stable workholding. Is the design suitable for harsh workshop conditions? The Kukamet Pneumatic Clamp 651 features a zinc‑plated finish and a massive holding arm, offering enhanced corrosion resistance and mechanical durability for industrial environments. Can this clamp be integrated into automated lines? The Pneumatic Clamp 651’s compact toggle design and pneumatic actuation support automated production lines where consistent, repeatable clamping is required Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
150mm Pneumatic Precision Machine Vice 6,000 kgf Clamping Force, Cast Iron, 0.01mm Accuracy - Vertex
Take advantage of a high clamping force together with fine positional accuracy and robust cast iron construction to maintain process stability and reduce rework. The reliable pneumatic actuation and compact footprint support faster cycling on machining centres. Order the pneumatic precision machine vice directly via Metav Werkzeuge or ask our consultants if needed. Pneumatic Precision Machine Vice VMC-5P — 6,000 kgf clamping force, 0–150 mm opening (Vertex) The Pneumatic Precision Machine Vice VMC-5P is a pneumatically operated clamping solution designed for high-precision workholding on milling machines and machining centres. 6,000 kgf clamping force 0–150 mm adjustable jaw opening Cast iron construction for stability 0.01 mm positioning accuracy Stable clamping for consistent part quality The vice’s 6,000 kgf clamping force and cast iron body create a stable contact between workpiece and table, reducing vibration and tool chatter during heavy cutting. This stability translates into fewer rejects and less finish machining, which improves throughput in batch production. With a clearly specified 0–150 mm jaw travel and rigid construction, setups remain reproducible; once clamped, the workpiece is held securely for milling, drilling and finishing operations. The combination of mass and stiffness is particularly beneficial where dimensional repeatability is required across multiple cycles. Faster cycles through pneumatic actuation and precise positioning Pneumatic actuation provides a rapid and reliable clamping sequence that shortens cycle times compared with manual tightening. The actuated mechanism is designed for integration with existing machine tool pneumatics, enabling automated clamping within programmed cycles. Positioning is specified to 0.01 mm, which means that the clamping unit supports high repeatability and minimal repositioning during secondary operations. For workshops aiming to increase efficiency, the pneumatically controlled vice reduces idle time between operations while ensuring the same high degree of precision for each clamped component. Compact footprint and practical workshop integration With external dimensions of 130 × 520 × 160 mm and a mass of 38 kg, the vice fits readily on standard machine tables without excessive overhang. Its pneumatic actuation removes the need for prolonged manual handling, and the durable cast iron construction minimises wear under continuous use. The clamping unit is supplied under the designation VMC-5P and has been engineered for straightforward alignment and routine maintenance; routine inspection focuses on pneumatic lines and sealing elements, keeping downtime low. Clear technical specifications aid planning for fixtures and allow uncomplicated integration into production lines. Contact Metav Werkzeuge in Emmerich to discuss how the Vertex VMC-5P’s 6,000 kgf clamping force and 0.01 mm accuracy can streamline production — email info@metav-werkzeuge.com or call +49 2822 7131930 for detailed technical advice Technical data SKU: VMC-5P GTIN: 4061905089978 ECLASS: 21020601 ETIM: EC002173 Numbers Clamping force: 6,000 kgf Jaw opening: 0–150 mm Accuracy: 0.01 mm Dimensions: 130 × 520 × 160 mm Weight: 38 kg Special features Material: cast iron Type: pneumatic Manufacturer: Vertex Suitable for integration on milling machines and machining centres FAQ What machining tasks is this vice suited for? The vice is designed for general machining tasks on milling machines and machining centres; the VMC-5P by Vertex is suitable for operations requiring robust clamping and fine positional accuracy. How accurate is the clamping repeatability in production? Repeatability is specified to 0.01 mm, so the vice maintains consistent part position across multiple cycles, supporting tight tolerances during batch production. What are the dimensional and weight considerations for mounting? External dimensions are 130 × 520 × 160 mm with a weight of 38 kg, allowing straightforward mounting on standard machine tables with appropriate fixture planning. Is the clamping force sufficient for heavy cutting operations? With a clamping force of 6,000 kgf, the unit provides high holding power for demanding cut conditions; the cast iron body contributes to overall stability during heavy machining. What maintenance is required for the pneumatic system? Regular checks of the pneumatic lines and seals are recommended; routine inspection and basic service keep the Vertex VMC-5P operating reliably over extended production runs. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
150mm Pneumatic Toggle Clamp Horizontal Base, Massive Holding Arm, 3,300N Hold Force, 3,000N Clamp Force, 95° Angle - Kukamet
Robust, zinc-plated construction and precise pneumatic actuation deliver consistent clamping and repeatable set-ups. With a 3,000 N piston force and a 3,300 N holding load, this device reduces rework and machine downtime; order directly via Metav Werkzeuge or ask their advisors for specification support. 631 Pneumatic Clamp — Zinc-plated, 3,000 N piston force The 631 is a heavy-duty pneumatic clamp designed for industrial workholding and workshop fixtures, featuring a horizontal base and a massive holding arm for reliable part securing Heavy-duty holding arm 3,000 N pneumatic clamping force Horizontal foot for stable mounting Consistent clamping force for repeatable production The pneumatic clamp design provides a controlled and rapid clamping action, delivering a 3,000 N piston force and a 3,300 N holding load that stabilises parts during machining, welding or assembly. This level of force contributes to steady cycle times and fewer interruptions for re‑adjustment; the pneumatic actuation allows faster set-up than manual alternatives while offering repeatability that supports quality assurance and process reproducibility. Stable mounting and corrosion-resistant durability A horizontal foot ensures a compact and secure mounting position on fixtures and machine tables, while the zinc-plated finish protects against corrosion in workshop environments. The 150 mm arm provides reach without compromising rigidity, and the solid holding arm construction resists deformation under load. The clamping angle of 95° maintains a consistent force vector, meaning components stay in the intended position throughout the process for cleaner joins and fewer rejects. Easy integration into existing jigs and fixtures Designed in the lever-clamp tradition, this model suits a wide range of setups in metalworking and general fabrication. The robust build simplifies retrofit into existing jigs and automation cells; electrical or pneumatic interfaces remain standard, so commissioning is straightforward. Supplied by Kukamet, the unit pairs mechanical simplicity with industrial durability, supporting continuous operation and predictable maintenance intervals for production environments. For procurement or technical clarification on the Kukamet 631 pneumatic clamp, please contact Metav Werkzeuge in Emmerich — info@metav-werkzeuge.com or +49 2822 7131930 for availability and integration advice Technical data Article number: 631-4-D-C2 Manufacturer: Kukamet Facts Maximum piston force: 3,000 N Maximum holding force: 3,300 N Arm length: 150 mm Angle: 95° ECLASS: 21021004 ETIM: EC011973 Special features Material: Zinc-plated Mounting: Horizontal foot Massive holding arm Massive arm: yes FAQ How much clamping force does the clamp provide? The Kukamet 631 pneumatic clamp delivers a piston force of 3,000 N and a holding force of 3,300 N, suitable for demanding workholding tasks. Can this clamp be mounted on existing fixtures? Yes. The horizontal foot design of the 631 enables straightforward integration into jigs and machine tables without major modifications. Is the clamp suitable for harsh workshop environments? The zinc-plated finish on the 631 provides corrosion resistance appropriate for normal workshop and production conditions. What is the effective reach of the clamping arm? The device features a 150 mm arm that balances reach and rigidity for a variety of part geometries. Does the clamp maintain a consistent clamping angle during operation? Yes. The clamp operates at a fixed 95° angle, ensuring a stable force direction and reliable part positioning. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
150mm Positioning Angle Fixture, Hardened Cast Steel, 0.01mm Accuracy, 3.8kg - Vertex
Take advantage of the combination of high-strength cast steel, ±0.01 mm accuracy and compact dimensions for reliable, repeatable fixturing in inspection and small-batch machining. Order the component directly via Metav Werkzeuge or consult our specialists for application support. VR-6 angle plate — Vertex precision workholding with high-strength cast steel and 0.01 mm accuracy The VR-6 angle plate is a compact, robust fixturing element designed for precision workholding in inspection benches and machine tables, offering stable positioning for small components and measurement setups. High-strength cast steel construction Precision accuracy ±0.01 mm Compact dimensions 150 x 115 x 126 mm Solid 3.8 kg for vibration damping Reliable alignment that preserves measuring certainty The angle fixture delivers consistent positional accuracy thanks to its ±0.01 mm accuracy, a level of precision that supports repeatable measurements and tight-tolerance machining. Built from high-strength cast steel, the unit combines material rigidity with thermal stability so that reference faces retain alignment during routine use. For workshops that perform frequent inspection cycles, the precise tolerances reduce the need for repeated realignment and streamline the measurement workflow. Technical features such as machined reference surfaces ensure compatibility with calibrated gauges and standard clamping hardware while preserving surface quality over many cycles. Mass and compactness that improve setup efficiency With external dimensions of 150 x 115 x 126 mm and a mass of 3.8 kg, the angle plate offers a balance between portability and stability. The unit’s weight increases contact pressure on the machine table or inspection plate, improving vibration damping and reducing chatter during manual positioning. Its compact footprint makes it suitable for smaller benches and tight fixtures, while the solid construction simplifies clamping arrangements and minimises the need for auxiliary supports. The compact design therefore shortens set-up time and supports efficient batch inspection without sacrificing the mechanical stability required for precision work. Practical design for workshop integration and longevity The component has been manufactured to integrate easily into existing workflows: machined datum faces are ready for immediate clamping and the robust casting resists deformation during normal workshop handling. The robust workholding nature of the plate makes it suitable for both inspection and light machining tasks where precise angular positioning is required. Minimal routine maintenance—cleaning and protection against heavy impact—keeps the part serviceable for years. Metav’s presence in Emmerich acts as a local quality filter for the European market, pairing product availability with technical advice so that selection matches the application and production requirements. Contact Metav Werkzeuge today for tailored application advice or to secure the Vertex VR-6 angle plate for precision fixturing; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: VR-6 GTIN: 4061905084041 ECLASS: 21020601 Core specifications Dimensions: 150 x 115 x 126 mm Accuracy: 0.01 mm Weight: 3.8 kg Materials & features Material: high-strength cast steel Machined reference faces for precise positioning Compact, robust design for inspection and light machining FAQ What positional tolerance does the angle plate provide? The Vertex VR-6 angle plate guarantees an accuracy of ±0.01 mm, making the component suitable for precision measurement and fixture tasks where tight tolerances are required. What is the plate made from and why does that matter? The unit is manufactured from high-strength cast steel, which provides rigidity and good vibration damping, ensuring stable reference faces during inspection and machining operations. For which workshop tasks is this angle plate best suited? The angle plate is suitable for inspection benches, small machine tables and jigs where precise right-angle fixturing and stable workholding are necessary. How should the component be maintained to ensure longevity? Routine maintenance for the VR-6 angle plate consists of keeping machined surfaces clean, avoiding severe impacts and storing the piece in a dry environment to preserve accuracy and surface condition. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
150mm Precision Boring Head Set MT-4, M16x2.0P Thread - Vertex
Take advantage of a high-stability solution for internal machining: a precision boring head set with an MT-4 collet taper and an M16x2.0 threaded mounting that helps keep setup time low and bore quality consistent. Order directly via Metav Werkzeuge or consult their specialists for application guidance. VBH2084 – Precision boring head set with MT-4 taper and M16x2.0 thread (Vertex) The VBH2084 is a precision boring head set designed for fine internal diameter finishing in workshop and CNC environments, offering rigid construction and standardised mounting for repeatable results. Precision boring geometry for tight tolerances MT-4 taper compatibility for standard tooling M16x2.0 threaded mounting for secure attachment Robust 7 kg kit suited to workshop use Achieve consistent internal accuracy with reliable machining geometry The VBH2084 is engineered as a precision boring head set to deliver consistent bore quality where dimensional control matters. The combination of a rigid construction and a standardised MT-4 taper provides stability during machining, reducing deflection and helping to maintain concentricity. With an M16x2.0 threaded mounting, the head secures reliably to common adaptors and spindles, enabling predictable tool behaviour. This configuration reduces rework and supports adherence to tight tolerance chains by converting cutting forces into stable, repeatable adjustments. Faster setup and adaptable integration for workshop and CNC use Designed for compatibility with common tooling systems, the set accepts standard collets and adapter interfaces, simplifying changeovers and minimising downtime. The MT-4 interface and M16x2.0 thread permit quick integration into lathes, spindles and boring bars without custom fixturing, which supports lean production flows. High repeatability in axial position and cutting alignment improves throughput by shortening inspection intervals and lowering scrap rates. Where cycle times and process reliability are key, this modular approach to internal tooling helps keep operations efficient. Durable design and predictable performance for production environments The kit’s substantial construction contributes to vibration dampening and sustained cutting stability, supporting consistent surface finish and bore roundness across runs. Maintenance is straightforward: precision adjustment mechanisms are accessible for fine tuning, while the standardised interfaces make replacement parts widely available. Backed by Vertex’s engineering pedigree, the set is suitable for toolrooms, small-batch production and integration into CNC cell tooling packages. For complex materials or specialised applications, technical data and compatibility checks are available from Metav Werkzeuge to ensure the tooling choice matches the machining task. For advice on integration or to request tailored application support, contact Metav Werkzeuge — Metav’s specialists can confirm suitability for specific machines and processes and arrange fast supply from their Emmerich facility. Technical Data Article number: VBH2084-MT4 GTIN: 4061905088957 Model: VBH2084 Facts Weight: 7 kg Thread: M16x2,0P ECLASS: 21041590 Special features Collet type MT-4 Category: Vertex SKU: VBH2084-MT4 FAQ What applications suit this boring head set best? The VBH2084 precision boring head set is intended for internal finishing and diameter correction in toolroom and CNC environments, where stable cutting conditions and repeatable accuracy are required. Which taper and mounting does the set use? The set uses an MT-4 taper interface and an M16x2.0 threaded mounting to secure the head to common adaptors and spindles. Is the VBH2084 compatible with standard collets? Yes, the VBH2084 accepts standard collet fittings associated with its MT-4 configuration, enabling straightforward replacement of toolholders and collets. How does the design improve repeatability? The rigid construction and standardised mounting reduce deflection and runout, so the VBH2084 maintains positional stability and consistent bore geometry across production runs. Can the set be used on automated CNC cells? The set’s standardised interfaces and robust build make it suitable for integration into CNC cells and automated workflows where secure mounting and repeatable performance are essential. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
150mm Precision Boring Head Set VBH620 NT-40 - Vertex
Take advantage of the combination of precision fine adjustment, NT-40 collet compatibility and secure M16x2.0P mounting for stable internal machining; order the VBH620-NT40 directly via Metav Werkzeuge or consult the specialists for configuration advice. VBH620-NT40 Precision boring head set with NT-40 collet — Vertex The VBH620-NT40 is a precision boring head set designed for fine internal machining in CNC and toolroom environments, optimised for repeatable adjustments and secure NT-40 collet mounting. NT-40 collet compatibility Precision fine-adjustment mechanism Robust 6.5 kg construction Thread M16x2.0P for secure mounting Accurate hole-making that reduces rework and cycle time The set delivers precision through a calibrated fine-adjustment mechanism that converts minute index changes into controlled cutting-depth variation. This enables measurable improvements in tolerances and surface finish when producing internal bores or reworking fitted housings. The integration of a true NT-40 collet system provides stable clamping of cutting tools, reducing runout and resulting in fewer scrapped parts and less time spent on secondary operations. Such gains translate directly into productivity advantages on small- to medium-batch production runs. Engineered rigidity for consistent repeatability Built with a focus on rigidity, the assembly benefits from a substantial mass and compact geometry that stabilise the tool during cutting. The specified weight of 6.5 kg contributes to vibration damping, while the standard M16x2.0P thread ensures a secure mechanical interface to adaptors or toolholders. Together these characteristics promote steady cutting conditions and consistent results across shifts, which is particularly valuable in precision metalworking where repeatability defines overall process quality. Smooth integration into existing tooling systems and workflows Compatibility with the NT-40 collet family simplifies integration into established CNC toolchains and reduces changeover time between operations. The modular nature of the set supports straightforward tool replacement and adjustment without extensive recalibration, providing practical convenience on the shop floor. Alongside technical benefits, the set aligns with Metav’s supply philosophy: accessible, dependable tooling backed by a European quality filter and stocked for reliable delivery to industrial and craft customers. Contact Metav Werkzeuge for tailored tooling configurations and stock availability — our specialists can advise on Vertex VBH620-NT40 setup and delivery options Technical data SKU: VBH620-NT40 GTIN: 4061905083426 Brand: Vertex Model: VBH620 Numbers / Core technical data Weight: 6.5 kg Thread: M16x2.0P eCl@ss: 21041590 Designs / Special features Product type: Precision boring head set Collet system: NT-40 Thumbnail: https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/ba/2f/97/63/63972fbac806fb82109e3554/vbh620-nt40-main.jpg FAQ What tooling system does this set use? The Vertex VBH620-NT40 uses the NT-40 collet system for secure tool clamping and reduced runout. How is the boring head mounted? Mounting is via a standard M16x2.0P thread to ensure a firm mechanical connection to adaptors or holder interfaces. What contributes to the set’s stability during cutting? A compact design and the 6.5 kg mass provide enhanced vibration damping, improving surface finish and repeatability. Is this set suitable for CNC applications? Yes, the unit is designed for integration into CNC toolchains where repeatable fine adjustment and NT-40 compatibility are required. What benefits does fine adjustment bring to machining? Fine adjustment enables precise depth control, reducing the need for rework and helping to maintain consistent bore diameters across batches. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
150mm Precision Machine Vise Modular Hydraulic Option, 0.01mm Accuracy - Vertex
Benefit from the combination of a 4500 kgf clamping force, 0.01 mm repeatability and a modular configuration that stabilises production processes while offering fast reconfiguration. Order the precision machine vice directly via Metav Werkzeuge or contact our consultants for tailored setup advice. VMP-8BH precision machine vice — modular hydraulic clamping, 4500 kgf | Vertex The VMP-8BH is a modular precision machine vice designed for hydraulic clamping in machining centres and toolroom environments, providing robust workholding for a wide range of production tasks Modular design for flexible configuration Hydraulic clamping option 4500 kgf Opening range 0–300 mm for versatile parts High precision repeatability 0.01 mm Consistent clamping and measurable process stability A workholding solution that delivers measurable gains: the vice combines a high clamping force with proven repeatability to reduce part movement and rework. The specified 4500 kgf clamping capacity, together with a repeatability of 0.01 mm, means setups are held firmly during heavy cuts and fine finishing alike. In machining, reduced vibration and secure contact translate directly into longer tool life and fewer rejected parts, so cycle times and scrap rates can both be improved. The body is manufactured from alloy steel, giving structural rigidity that supports consistent results over extended production runs. Flexible modularity for rapid adaptation The modular concept allows the vice to be reconfigured for different tasks or integrated into varied fixturing arrangements. A hydraulic option is available for applications requiring fast, reliable clamping without manual torqueing, which streamlines changeovers and standardises clamping pressure across multiple stations. The modular approach simplifies retrofitting onto machine tables and supports rapid tooling changes. Where predictable clamping and repeatable force are required, this clamping system reduces set-up variability and helps maintain steady output quality across shifts. Compact footprint, simple integration and clear maintenance advantages Designed for workshop integration, the vice's compact dimensions of 170 x 595 x 135 mm (L x W x H) and a mass of 69 kg make it straightforward to mount and align on common machine tables. The opening span of 0–300 mm covers many common component sizes, reducing the need for multiple dedicated fixtures. Service and maintenance are kept simple by the modular construction, which allows individual components to be inspected or replaced without dismantling the entire assembly. The precision specification means that inspection intervals are predictable and calibration routines can be planned into normal maintenance cycles, supporting reliable long-term operation. For configuration advice, delivery options from Emmerich and to discuss how the VMP-8BH modular hydraulic vice can be tailored to specific production needs, contact Metav Werkzeuge for expert guidance and rapid response Technical Data Article number: VMP-8BH GTIN: 4061905087356 ETIM: EC002173 ECLASS: 21020601 Brand: Vertex Facts Opening range: 0–300 mm Dimensions: 170 x 595 x 135 mm (L x W x H) Weight: 69 kg Clamping force: 4500 kgf Accuracy: 0.01 mm Special features Material: alloy steel Type: Hydraulic Modular, optional hydraulic configuration Precision machine vice for machining centres FAQ What clamping force does the vice provide? The VMP-8BH delivers a clamping force of 4500 kgf, which ensures secure holding for heavy milling and finishing operations with minimal workpiece movement. What is the maximum opening capacity? The vice offers an opening range of 0–300 mm, enabling accommodation of a broad variety of component sizes without the need for additional bespoke fixtures. Is the vice hydraulic or manual? The unit is supplied as a modular precision machine vice with an optional hydraulic clamping configuration; this allows selection between manual or hydraulic actuation depending on workshop requirements. What level of accuracy can be expected for repeatability? Repeatability is specified at 0.01 mm, providing the precision necessary for demanding machining tasks and reliable dimensional control across batches. What are the physical dimensions and mass for machine integration? The vice measures 170 x 595 x 135 mm (L x W x H) and weighs 69 kg, permitting straightforward mounting on standard machine tables while keeping the footprint compact. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
150mm Precision Machine Vise Modular Hydraulic Option, 1300 kgf Clamp Force, Alloy Steel - Vertex
Taking advantage of a high accuracy of 0.01 mm together with a 1300 kgf clamping force ensures consistently precise and secure machining results; the modular design with optional hydraulic module supports flexible integration into bench and machine setups. Order the unit directly via Metav Werkzeuge or contact the consultants for configuration assistance. Precision Machine Vice VMP-5 — Vertex mechanical vice with 1300 kgf clamping force and 0–150 mm opening The Precision Machine Vice VMP-5 is a mechanical, modular vice engineered for repeatable, secure clamping in precision machining and fixture applications across toolrooms and production benches. High-precision repeatability 0.01 mm 1300 kgf clamping force for secure holding Modular design with optional hydraulic module Robust alloyed-steel construction, 16 kg Consistent accuracy that reduces scrap and inspection time Built for tight tolerances, the vice delivers a specified accuracy of 0.01 mm, translating into reliable repeatability across series production and complex single-part jobs. That level of precision reduces the need for frequent re-measurement and lowers scrap rates, which supports faster throughput and predictable quality control. The specified repeatability is especially beneficial when paired with CNC machining or fine manual finishing, since stable workpiece positioning minimises vibration-related deviation and tool deflection. Secure clamping that protects components and tooling The vice offers a rated clamping force of 1300 kgf, which provides firm workpiece retention during heavy cuts and interrupted machining. A higher clamping force helps to maintain part geometry and reduces micro-movements that can cause tool wear or surface defects. The 0–150 mm opening accommodates a broad range of part sizes without compromising bite depth, so fixtures and soft jaws can be used to protect delicate finishes while retaining rigidity during machining operations. Modular flexibility for process adaptation A modular design with optional hydraulic module enables straightforward adaptation to different production needs: from simple mechanical clamping for bench tasks to hydraulic actuation for automated or repeat-cycle setups. Modularity reduces downtime because units can be reconfigured or upgraded without full replacement. The vice’s configuration options make it suitable for jigs, fixtures, test benches and small-series automation where changeover speed and consistent clamping pressure matter. Durable construction for daily industrial use Manufactured from alloyed steel and weighing 16 kg, the unit balances mass for stability with a compact footprint (96 x 345 x 80 mm). The robust material choice provides resistance to deformation and ensures long service intervals under standard shop conditions. Design features are focused on minimizing maintenance: accessible wearing surfaces, straightforward lubrication points and a mechanical architecture that tolerates workshop environments while maintaining precision. Contact Metav Werkzeuge to discuss how the Vertex VMP-5 can be configured for specific workshop requirements — call +49 2822 7131930, message via WhatsApp +49 170 2837271 or email info@metav-werkzeuge.com to request technical guidance and delivery options Technical data Article number: VMP-5 GTIN: 4061905087776 Manufacturer: Vertex Facts Dimensions: 96x345x80 mm Weight: 16 kg Accuracy: 0.01 mm Clamping force: 1300 kgf Opening range: 0–150 mm Materials & special features Material: Alloyed steel Type: Mechanical vice Modular design, optional hydraulic module eClass: 21020601 ETIM: EC002173 FAQ What level of repeatability can be expected from this vice? Repeatability is specified at 0.01 mm for the VMP-5 precision machine vice, providing consistent positioning suitable for fine machining and series work. Is the clamping force sufficient for heavy cutting operations? The vice delivers 1300 kgf clamping force, which is designed to maintain secure workholding during aggressive or interrupted cuts in typical workshop and small-scale production scenarios. Can the vice be upgraded to hydraulic actuation? Yes, the modular design allows the addition of an optional hydraulic module, enabling automated clamping cycles and uniform pressure control where required. What materials is the vice suitable for clamping? Constructed from alloyed steel, the vice is intended for clamping a wide range of workpieces; soft jaws or protective fixtures are recommended for delicate surfaces. How compact is the vice for benchtop or machine-mounting? With external dimensions of 96 x 345 x 80 mm and an opening range of 0–150 mm, the vice is compact enough for bench mounting while still accommodating a variety of part sizes. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
150mm Precision Parallel Set 8 Pieces 13x25–13x44mm, 175x150x55mm - Vertex
Take advantage of the combination of high repeatability (0.01 mm), a practical range of paralleL sizes and compact storage to speed up setup and inspection workflows. Order this precision set directly via Metav Werkzeuge or consult our specialists for application advice. Precision Parallel Support Set VP-050 — 0.01 mm accuracy, workshop-grade parallels (Vertex) The Precision Parallel Support Set VP-050 supplies stable, accurately aligned support for workpieces during machining, clamping and measurement tasks in industrial workshops and inspection benches. High precision: 0.01 mm tolerance Includes precision parallels in varied sizes Robust, compact set for workshop use Supplied with clear SKU VP-050 for ordering Consistent alignment that reduces rework The set delivers 0.01 mm repeatability, which supports consistent setups and reduces the need for rework during milling, drilling or inspection. Parallels are rigid shims placed between workpiece and vice jaws to keep the component parallel to the machine table; this prevents tilt and ensures clamping forces are distributed evenly. Such dimensional control is particularly important when subsequent operations require tight tolerances, as stable support directly influences final part geometry and inspection results. Flexible support heights for faster clamping With parallels in multiple widths and lengths, the set enables quick adaptation to varying workpiece geometries and vice configurations. The kit contains parallels in the sizes 13×25×150 mm, 13×31×150 mm, 13×38×150 mm and 13×44×150 mm, allowing one to raise, level or space components without improvised shims. This flexibility shortens setup time and simplifies fixturing, so processes run more efficiently and machine uptime increases. Compact design and dependable supply chain The set is supplied in a compact package (175×150×55 mm) and has a shipping weight of 4.5 kg, which eases storage and handling in busy workshops. Sourced through Metav Werkzeuge, the kit benefits from a transparent European distribution hub in Emmerich that acts as a quality filter for the market. This proximity supports reliable stock levels and predictable delivery, which is valuable when maintaining continuous production or inspection schedules. For secure and repeatable setups, enquire about the Vertex VP-050 via Metav Werkzeuge — shipped from Emmerich with full product guidance and swift order processing Technical data SKU: VP-050 GTIN: 4061905089688 Manufacturer: Vertex Accuracy: 0.01 mm Weight: 4.5 kg Pieces per set: 8 Package dimensions: 175×150×55 mm Contains parallels in sizes 13×25×150 mm, 13×31×150 mm, 13×38×150 mm, 13×44×150 mm Set type: precision parallel support set eClass: 21170610 FAQ What accuracy can be expected from the set? The set is specified with an accuracy of 0.01 mm, providing precise and repeatable support for machining and measurement tasks with the VP-050. Which parallel sizes are included in the kit? The kit contains parallels in the sizes 13×25×150 mm, 13×31×150 mm, 13×38×150 mm and 13×44×150 mm to cover a range of support heights and clamping situations. For which applications is this set suitable? This precision parallel set is suitable for milling, drilling, turning set-ups and inspection benches where stable, parallel support of the workpiece is required. Is the material of the parallels specified? The product data does not specify the material of the parallels; the VP-050 is presented as a precision support set with the listed dimensions and accuracy. How compact is the set for workshop storage? The packaged dimensions are 175×150×55 mm and the gross weight is 4.5 kg, which suits storage on workshop shelving or in tool cabinets. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
150mm Precision Parallel Set 8pcs (5×25/31/38/44×150mm), Accuracy 0.01mm - Vertex
Take advantage of precise positioning and a complete set of sizes for dependable setup work. The combination of accuracy 0.01 mm, a compact footprint and a full range of paired parallels ensures smooth fixturing and quicker changeovers. Order the set directly via Metav Werkzeuge or contact our consultants for tailored advice. Precision Parallel Set VP-163 by Vertex — high-accuracy parallels, 0.01 mm A Precision Parallel Set VP-163 designed for secure workpiece support and repeatable set-ups in machining, inspection and tool preparation High positioning accuracy 0.01 mm Includes four paired sizes for versatile use Compact dimensions 175 x 85 x 55 mm Lightweight 1.7 kg for easy handling Reliable positioning for repeatable setups High positioning accuracy is the primary advantage when setting up jigs, vises or inspection fixtures. With a rated accuracy of 0.01 mm, these parallels give a measurable basis for repeatable alignment, reducing set-up time and rework. The precise tolerance allows for consistent reference planes during milling, drilling and measurement tasks, which improves throughput and lowers the risk of scrap. The set supports process stability through predictable fixturing behaviour and better control of part geometry across batches. Versatile size range for flexible fixturing A pragmatic selection of paired sizes makes the set suitable for a wide range of component dimensions. The delivery includes 2x 5x25x150 mm, 2x 5x31x150 mm, 2x 5x38x150 mm and 2x 5x44x150 mm, providing 8 pieces arranged as matched pairs that simplify clamping arrangements. These size options enable users to choose the most suitable support height and contact width for diverse workpieces, from small brackets to longer bars, without compromising stability. The result is faster fixturing decisions and fewer tool offsets. Compact handling and straightforward workshop integration With overall dimensions of 175 x 85 x 55 mm and a weight of 1.7 kg, the set is compact enough to be stored in standard tool cabinets and carried between workstations. Its modest footprint helps shops streamline workstation layout and maintain an organised tooling system, which contributes to faster setup cycles. The compact design also supports portable inspection tasks at the machine or bench, while the clear size assortment reduces the need for multiple separate purchases. Contact Metav Werkzeuge for expert guidance on integration of the VP-163 into existing workflows or to request full technical documentation – email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: VP-163 GTIN: 4061905087240 ECLASS: 21170610 Set: yes Pieces per set: 8 Facts Accuracy: 0.01 mm Weight: 1.7 kg Dimensions: 175 x 85 x 55 mm Contents and special features Contents: 2x 5x25x150 mm; 2x 5x31x150 mm; 2x 5x38x150 mm; 2x 5x44x150 mm Product type: precision parallels set Brand: Vertex SKU reference: VP-163 FAQ What applications are the parallels suited for? The parallels in this set are intended for workpiece support during machining, inspection and tool setup; the Precision Parallel Set VP-163 by Vertex is suitable for parts that require a stable reference plane and repeatable positioning. How many pieces are included and how are they arranged? The delivery contains 8 pieces arranged as four matched pairs: 2x 5x25x150 mm, 2x 5x31x150 mm, 2x 5x38x150 mm and 2x 5x44x150 mm, allowing flexible selection of support heights. What level of accuracy can be expected? The set is specified with an accuracy of 0.01 mm, providing a reliable tolerance band for repeatable setups and precision fixturing tasks. Can the parallels be used directly at the machine or for inspection benches? Yes, the compact dimensions and balanced weight make the set suitable for both bench inspection and direct use at machine tools; the VP-163 supports quick transfers between stations. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
150mm Precision Parallel Shim Set 0.01mm Accuracy, 36 Pieces - Vertex
Take advantage of precise, repeatable set-up with the combination of fine 0.01 mm tolerance and an organised transport case for efficient workflow; order the item directly via Metav Werkzeuge or contact our consultants for tailored advice. Vertex VP-136 Precision Parallel Shim Set — 0.01 mm accuracy, compact case The Vertex Precision Parallel Shim Set is a workshop kit designed for accurate set-up and fixturing tasks across machining and inspection applications. Precision tolerance 0.01 mm Compact storage case with clear layout Organised layout for quick selection Robust set for machining set-up tasks Accuracy that reduces rework and set-up time The core advantage of this parallel kit is its 0.01 mm accuracy, which ensures consistent reference surfaces for clamping, inspection and alignment. Accurate parallels minimise the need for repeated adjustments and reduce scrap, making processes more reliable. The tolerance figure refers to the maximum deviation between paired surfaces and is suitable where tight planar reference is needed; this precision supports efficient repeatability in batch operations and machine set-up. Organised kit for faster changeovers Housed in a compact case sized 390 x 292 x 82 mm, the set is arranged to allow rapid retrieval and return of individual parallels. A structured layout helps maintain workplace order and speeds up changeovers between jobs. The case design balances accessibility with protection during transport, helping teams maintain productivity without compromising component condition during handling. How parallels support machining and inspection Parallels provide stable, flat reference surfaces for workholding and measuring. When placed between a workpiece and the machine table or vice versa, they raise and align components so that clamping forces are distributed evenly and measurement errors are reduced. For shops and inspection benches, the use of quality parallels improves positional accuracy and reduces setup uncertainty compared with ad hoc supports. Built for everyday workshop use The kit’s design focuses on practical workshop demands: durable storage, repeatable geometry and straightforward integration into standard set-up routines. With a portable case and balanced weight (12.3 kg when packed), the collection is suitable for bench work, mobile toolrooms and event-based metrology checks. The SKU VP-136 identifies this particular configuration for ordering and stock control. Choose the Vertex VP-136 for dependable 0.01 mm set-up precision — contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or +49 2822 7131930 for advice and reliable supply Technical Data Article number: VP-136 GTIN: 4061905083310 Brand: Vertex Facts Case dimensions: 390 x 292 x 82 mm Weight: 12.3 kg Accuracy: 0.01 mm Set items: 36 Special features Contents: 2x 8x16x150mm, 2x 8x16x150mm, 2x 8x20x150mm, 2x 8x22x150mm, 2x 8x24x150mm, 2x 8x26x150mm, 2x 8x28x150mm, 2x 8x30x150mm, 2x 8x32x150mm, 2x 8x34x150mm, 2x 8x36x150mm, 2x 8x38x150mm, 2x 8x40x150mm, 2x 8x42x150mm, 2x 8x44x150mm, 2x 8x46x150mm, 2x 8x48x150mm and 2x 8x50x150mm FAQ What tolerance can be expected from this parallel set? The Vertex VP-136 Precision Parallel Shim Set is specified with a tolerance of 0.01 mm, ensuring high repeatability for set-up and inspection tasks. Is the set suitable for mobile toolroom use? Yes, the organised case and balanced packed weight make the collection suitable for bench work and mobile toolroom operations. How does the kit help reduce machining errors? By providing consistent, flat reference surfaces, the parallels in this set improve clamping stability and alignment, which lowers positional errors during machining. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
150mm Precision Parallel Shim Set Pair-Matched Ground 24 Pairs, Hardened, 0.01mm Height Tolerance IT5 - AMF
Benefit from precise, wear-resistant shims with fine pair-matching and tight height tolerances for reliable set-up and inspection. Combine case-hardened durability, pairwise fine-ground accuracy and a practical 1 mm increment range for efficient workshop operation. Order the set directly via Metav Werkzeuge or consult the technical team for application advice. Parallel shim set Nr. 6348P - 150 — Precision pair-matched shims, 150 mm length (AMF) A Parallel shim set Nr. 6348P - 150 designed for precision shimming and spacing in clamping, inspection and jigging applications across metalworking workshops Precision ground in matching pairs Case-hardened for long-term wear resistance Set provides 1 mm increments Nominal height tolerance ±0.01 mm Precise pairing for repeatable, measurable set-ups The set is manufactured to deliver consistent thickness across mating pairs, with a declared pair tolerance (IT 5) and a nominal height tolerance of ±0.01 mm. These specifications ensure that each paired shim behaves predictably under load, reducing adjustment time during fixture assembly and inspection. IT grades and micron-level tolerances are standard ways to quantify manufacturing precision; in practice this means the shims support reproducible component positioning and reliable measurement transfer between setups. Hardening and surface finish that extend service life The shims are case-hardened, giving a hardened surface layer that improves resistance to wear and indentation while retaining a tough core. Surface treatment combined with fine-ground, flat-parallel finishing minimises local deformation when used between clamping faces. Case-hardening (surface carburising) creates a durable contact surface without making the entire part brittle, which is particularly advantageous for frequent re-use in workshop and inspection environments where small deviations affect final tolerances. Practical range and workflow benefits for workshops Contained as a matched set of 24 pairs with a nominal length of 150 mm, the kit covers a sensible stepping range in 1 mm increments, allowing rapid selection of the required build-up without time-consuming custom shimming. The modular range reduces the number of components needed in inventories and speeds up vice, fixture and gauge set-ups. For toolmakers and inspection technicians, the clear increments and matched pairs translate directly into fewer iterative adjustments and shorter machine downtime. Compliance, handling and storage that support precision Manufactured and ground to meet common engineering drawing conventions and dimensional control (remaining dimensions per DIN ISO 2768m where applicable), the set is supplied prepared for immediate workshop use. The fine-ground surfaces and defined tolerances simplify calibration routines and reduce the need for extra surface preparation. Packaged for workshop handling, the set maintains organisation and protects the ground faces during transport and storage, helping to preserve the declared specifications over time. For application-specific advice or to arrange supply of the AMF Nr. 6348P - 150 parallel shim set, contact Metav Werkzeuge in Emmerich; technical consultants can advise on selection and availability via info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data SKU: 4123321022NW Type: Nr. 6348P - 150 Product: Parallel shim set Brand: AMF Content: 24 pairs Length: 150 mm Facts Pair tolerance: IT 5 Height tolerance: ±0.01 mm Increment: 1 mm Special features Case-hardened surface Pairwise fine-ground, flat-parallel Sets cover range with 1 mm steps Supplied for workshop use FAQ What tolerance can be expected from these shims? The parallel shim set Nr. 6348P - 150 is specified with a pair tolerance of IT 5 and a nominal height tolerance of ±0.01 mm, providing stable, measurable accuracy for precision set-ups. How many shims are included and what increments do they cover? The AMF parallel shim set contains 24 pairs and is arranged to provide 1 mm incremental build-up across its useful range. Are these shims suitable for frequent clamping use? Yes; the case-hardened surface and fine-ground finish make the shims resistant to wear and suitable for repeated clamping and inspection tasks without rapid degradation. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm Precision Parallels Set 18 Pieces, 0.01mm Accuracy, 4.5kg - Vertex
Take advantage of the combination of 0.01 mm accuracy and an 18-piece configuration with metric widths from 19–44 mm for fast, repeatable setup and fine alignment in the toolroom; compact dimensions and a clear contents list ensure organised storage and simple selection. Order the VP-064 directly via Metav Werkzeuge or ask our consultants if needed. VP-064 Precision Parallel Shim Set by Vertex — 0.01 mm accuracy, 18 pieces The VP-064 Precision Parallel Shim Set is a compact set of parallel shims designed for precise spacing, alignment and setup tasks in workshops and assembly stations. High precision: 0.01 mm accuracy 18-piece metric shim set Widths 19–44 mm, length 150 mm Uniform thickness of 6 mm for stacked adjustments Reliable accuracy for repeatable setups The VP-064 delivers 0.01 mm nominal accuracy, giving measurable repeatability when fine shimming is required. High tolerances reduce the need for trial-and-error adjustments and support consistent fixturing and measurement procedures. For operations where small positional changes affect part quality, the precision of each shim helps to stabilise processes and cut setup time, supporting throughput and reducing scrap. Versatile widths for controlled alignment The set contains an 18-piece assortment with widths spanning 19–44 mm and a uniform length of 150 mm, enabling stepwise compensation and fine adjustment without machining. Each shim is sized to combine quickly into the required overall thickness; the standard 6 mm thickness per plate allows predictable stacking increments. This configuration simplifies alignment of fixtures, gauges and components in mechanical assembly and inspection tasks. Compact handling that suits the workshop With compact external dimensions of 288 x 228 x 75 mm and a total weight of 4.5 kg, the set is easy to store at a workstation or in a tool trolley while remaining substantial enough for daily industrial use. The organised assortment reduces search time and supports orderly tool management. Supplied as a matched set, the shims are ready for immediate deployment in maintenance, setup and calibration workflows. Integrates with established shop procedures Designed for routine use in toolrooms and production support, this parallel shim set works alongside standard metrology and clamping equipment to refine part position and eliminate play. The clear contents and consistent sizing assist teams in documenting adjustments and maintaining traceable setup records. Supplied through Metav Werkzeuge, the set benefits from a distributor that emphasises quality control and dependable European supply channels. Choose Vertex’s VP-064 for reliable, workshop-ready shimming — contact Metav Werkzeuge in Emmerich for tailored advice and a secure supply solution Technical data Article number: VP-064 GTIN: 4061905087905 Manufacturer: Vertex Dimensions: 288 x 228 x 75 mm Weight: 4.5 kg Core specifications Accuracy: 0.01 mm Pieces per set: 18 Length per shim: 150 mm Width range: 19–44 mm Thickness per shim: 6 mm Materials & features Set type: precision parallel shims Contents: 2 × each width 19, 22, 25, 28, 31, 35, 38, 41, 44 mm Packaged as a matched set SKU: VP-064 FAQ What level of accuracy can be expected from the set? The set provides an accuracy of 0.01 mm, which supports repeatable fine adjustments and stable fixturing during setup and inspection tasks. How many pieces are included and how are they arranged? The VP-064 contains 18 pieces arranged as pairs across nine metric widths, each shim being 150 mm long to allow straightforward stacking and combined thickness control. What are the individual shim dimensions? Each shim is 150 mm long with a uniform thickness of 6 mm; widths range from 19 mm up to 44 mm in the supplied assortment. Can the shims be stacked to achieve intermediate thicknesses? Yes — the consistent thickness and paired widths enable predictable stacking to reach intermediate spacing requirements for alignment or inspection. Is this set suitable for use in a production environment? The VP-064 is intended for workshop and toolroom use where reliable, repeatable spacing is required; its organised set format supports rapid deployment within production procedures. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
150mm Precision Quick-Change Drill Chuck 0-10mm Range B12 Taper Right-Hand High-Speed Hardened Components - RÖHM
Take advantage of the combination of precision, durable construction and rapid tool changes to keep production running smoothly; the self-tightening design and hardened wear parts ensure stable clamping at high speeds. Order the chuck directly via Metav Werkzeuge or consult the team for application advice. Spiro quick-change drill chuck — precision execution, 0–10 mm, B12, RÖHM The Spiro quick-change drill chuck in precision execution is designed for right-hand rotation and engineered for high-speed, high-accuracy drilling tasks on drilling machines and boring mills Precision execution, self-tightening Hardened wear parts for long life Clamping range 0–10 mm, suitable for B12 Designed for right-hand rotation, high speeds Improved hole accuracy and reduced rework The precision variant of this quick-change drill chuck delivers consistent clamping force and reduced run-out, which leads to repeatable hole tolerances and fewer secondary operations. The self-tightening mechanism maintains grip during rotation, so set-up time is reduced and machining stability is improved. For workshops and toolrooms that prioritise dimensional accuracy, this chuck provides measurable benefits in throughput and part quality. Longer service life and lower maintenance demands All wear parts are hardened, and the chuck features permanent, automatic re-tensioning to compensate for gradual wear. These design choices extend maintenance intervals and reduce spare-part turnover, translating into lower life-cycle costs. The durable construction is particularly advantageous where frequent tool changes and continuous operation are required, as the chuck resists typical wear mechanisms found in demanding production environments. Fast changes, simple machine integration With a B12 taper mount and a clamping range of 0–10 mm, the chuck integrates cleanly into standard drilling spindles and toolholders. The compact outer diameter facilitates accessibility in confined setups while the quick-change capability shortens tool-change cycles. Clear, measurable specifications ensure straightforward compatibility checks during machine planning and retrofit projects. Safe operation at production speeds Designed for right-hand rotation and optimised for high-speed use, this precision chuck supports reliable clamping during demanding runs on drill presses and boring mills. The combination of accurate centring and the self-acting tension system reduces the risk of slippage under load, helping to maintain process reliability and operator confidence during continuous production. Choose the RÖHM Spiro precision quick-change drill chuck for demanding, high-speed drilling operations and contact Metav Werkzeuge for ordering or technical consultation: info@metav-werkzeuge.com / +49 2822 7131930 Technical data Article number: 4000832068NW Label: Schnellspannbohrfutter Spiro Spann-Ø 0-10mm B 12 f.Re.-Lauf RÖHM Product type: Quick-change drill chuck Brand: RÖHM Mount: B12 Clamping range: 0–10 mm Rotation: Right-hand rotation Outer diameter: 43 mm Packaging unit: 1 Key figures Clamping range: 0–10 mm Outer diameter: 43 mm Mount: B12 SKU: 4000832068NW Special features Precision execution Self-tightening mechanism All wear parts hardened Permanent automatic re-tensioning Suitable for high speeds and accuracy work With taper mount Designed for right-hand rotation FAQ What clamping range does the chuck cover? The chuck offers a 0–10 mm clamping range suitable for small-diameter tooling and drill bits. How is the chuck mounted to the machine? Mounting is via a B12 taper; the B12 interface ensures direct compatibility with machines equipped for this mount type. Is the chuck suitable for high-speed drilling? Yes, the precision design and self-tightening feature make the chuck suitable for high-speed operation while maintaining clamping stability. Are the wear parts replaceable or hardened? All wear parts are hardened to extend service life, and the design allows for maintenance and parts replacement when required. Which rotation direction is supported? This chuck is designed for right-hand rotation, matching the standard spindle direction of many drilling machines. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm Prime Gear Drill Chuck 1.5–13mm Keyed S2A B16 Shank Right-Hand - RÖHM
Take advantage of a robust, keyed design and a wide 1.5–13 mm clamping range for reliable, repeatable drilling performance in stationary machines; order directly via Metav Werkzeuge or consult our specialists for application sizing. Prima Geared Drill Chuck (B16) — 1.5–13 mm clamping, right-hand rotation — RÖHM The Prima Geared Drill Chuck (B16) is a keyed, heavy‑duty chuck for stationary machines, engineered for right‑hand rotation and precise clamping of drill shanks from 1.5 to 13 mm. Heavy-duty keyed design Clamping range 1.5–13 mm B16 mounting with DIN 238 arbor Right-hand rotation, impact-proof Industrial performance for stationary machining The geared chuck delivers consistent torque transmission and stable tool holding thanks to its ring‑gear mechanism and keyed operation. Fitted with a B16 mounting and supplied with a drill‑chuck arbor conforming to DIN 238, it integrates cleanly with standard stationary spindles. The combination of a keyed drive and the geared housing reduces slippage under load, which leads to fewer reworks and a clearer machining window for operators using medium to heavy drilling cycles. The design is described as impact‑drill‑proof, making it suitable for demanding production environments where intermittent heavy loads occur. Precision clamping that reduces downtime With a clamping range of 1.5–13 mm and a key interface of S 2 A, the chuck secures common drill shank sizes without compromise. The keyed engagement ensures a firm grip on the tool, improving concentricity and lowering run‑out compared with friction chucks; this supports cleaner holes and extended tool life. The specified right‑hand rotation aligns with standard spindle directions for most workshop and industrial drill presses, simplifying tool selection and reducing setup errors. The unit’s availability as a heavy industrial execution makes it a dependable choice for fixed‑station drills and bench machines. Supply reliability and Metav industry support Sourcing through Metav Werkzeuge links the product’s technical strengths with dependable logistics and customer service. Metav’s role as a quality filter for the European market ensures stock management, spare‑part availability and clear specification guidance for workshop buyers and procurement teams. The chuck is delivered with the keyed accessory referenced as Art. no. 4000832050, and documentation on mounting and key size facilitates swift installation. For precision workshops seeking consistent parts and a single supplier for measuring and assembly needs, this approach reduces vendor complexity and supports uninterrupted production. Contact Metav Werkzeuge for tailored application advice or to request this Prima geared drill chuck (SKU 4000832036NW) for stationary machines, quoting the SKU for rapid processing. Technical Data SKU: 4000832036NW Product type: Geared drill chuck Brand: RÖHM Mounting: B16 Clamping range: 1.5–13 mm Key size: S 2 A Rotation direction: Right-hand Facts Clamping range: 1.5–13 mm Mounting standard: B16 Key size: S 2 A SKU: 4000832036NW Special features Drill‑chuck arbor to DIN 238 Impact‑drill‑proof design Supplied with key Art. no. 4000832050 Heavy industrial execution for stationary machines FAQ What clamping range does the Prima geared drill chuck offer? The Prima geared drill chuck provides a 1.5–13 mm clamping range suitable for common drill shank sizes. Is the chuck compatible with standard B16 spindles? Yes, the chuck uses a B16 mounting and includes a drill‑chuck arbor to DIN 238 for direct compatibility with B16 spindles. Which key size is required for tightening? The keyed interface is S 2 A; the supplied key is referenced as Art. no. 4000832050. Can this chuck withstand impact drilling conditions? The unit is specified as impact‑drill‑proof, designed for the intermittent heavy loads typical in stationary drilling operations. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm Prism Jaw VWS Mounting Attachment - Vertex
Combining secure cylindrical clamping and a compact, lightweight design, this prism jaw attachment ensures repeatable positioning and simple handling for small-batch machining; order the component directly via Metav Werkzeuge or consult our specialists for compatibility and mounting advice. Prism jaw attachment VWS-VK-5 — compact prism clamp for round stock, Vertex A prism jaw attachment intended to secure cylindrical and round workpieces in parallel vices and modular clamping systems for machining and inspection tasks Secure clamping for round stock Lightweight and easy to fit Repeatable centring and alignment Compatible with Vertex vice systems Engineered for accurate cylindrical clamping The prism jaw attachment converts standard vice jaws into a purpose-built fixture for rods, bars and cylindrical blanks by creating a V-shaped seating that distributes clamping force evenly. This geometry reduces elastic deformation of the workpiece and improves concentricity during turning, drilling or milling operations. For production runs and setup-sensitive tasks, the result is faster alignment and fewer rejected parts thanks to consistently maintained centrelines. Technical users benefit from a simple mechanical principle: by seating a round component in a prism profile, radial play is eliminated and torque transfer is improved, which can directly raise machining quality with minimal additional fixturing. Faster setup and practical workshop integration Fitting this attachment requires only basic vice accommodation, making it a pragmatic addition to existing benches and fixtures. The compact, lightweight construction keeps handling time low and reduces changeover effort between jobs, supporting lean workflows in small and medium workshops. As a clamping aid it reduces the need for long, complex auxiliaries while maintaining positional reliability—this translates into measurable time savings during part loading and alignment. Where traceability and repeatability matter, the prism solution offers a straightforward way to standardise setups across multiple machines and operators. Robust service life and process benefits Built for workshop use, the accessory provides predictable performance under repeated clamping cycles and simplifies quality control routines. By improving initial seating and alignment, surface finish and tool life can benefit indirectly from lower vibration and reduced micro-movements of the workpiece. The attachment’s form factor supports close packing of fixtures on the bench, helping to save space without sacrificing precision. For procurement and planning, the item is a low-complexity addition that addresses a common machining need: secure, repeatable holding of round and cylindrical materials. For Vertex-based clamping needs, request fitting guidance or a tailored quotation from Metav Werkzeuge — contact info@metav-werkzeuge.com or call +49 2822 7131930 to confirm compatibility with existing vices and fixtures. Technical data Article number: VWS-VK-5 GTIN: 4061905092565 Name: Prism jaw attachment Brand: Vertex Weight: 0.36 kg Core specifications Weight: 0.36 kg eClass: 21029205 GTIN: 4061905092565 Versions & special features Product family: VWS Category: Vertex Gallery image URL: https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/b9/2f/97/63/63972fb9c806fb82109e3522/vws-vl-4-detail.jpg Thumbnail URL: https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/b7/2f/97/63/63972fb7c806fb82109e34a5/vws-vk-4-main.jpg Story trigger: vertex FAQ What types of workpieces are best held with this prism jaw? The prism jaw attachment is designed primarily for round and cylindrical workpieces such as bars, shafts and dowels where a V-profile provides stable seating and repeatable centring. Can this accessory be fitted to different vice models? Compatibility depends on jaw geometry and vice width; the VWS-VK-5 prism jaw attachment is intended for use with Vertex-compatible vice systems and modular jaw arrangements. How does the prism profile improve machining results? By creating a stable V-shaped seat, the attachment reduces radial play and distributes clamping forces, which improves concentricity and can lead to better surface finish and extended tool life. Is the attachment suitable for inspection as well as machining? Yes — the repeatable positioning provided by the prism profile makes it suitable for inspection setups where consistent alignment of cylindrical parts is required. What handling advantages does the lightweight design provide? The compact, lightweight construction simplifies fitting and changeovers at the bench, reducing setup time and making the accessory easy to store and handle between jobs. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
150mm Pull Rod Clamp Size 5 With Small Angle Foot, Stroke 40mm, Hold Force 4500N - AMF
Take advantage of a compact, high-force clamping solution with a small angled foot and a maximum holding force of 4,500 N for reliable fixture operation; order directly via Metav Werkzeuge or consult our advisors for application support. AMF Push-rod Clamp No. 6841, Size 5 — small angled foot, 4,500 N holding force The AMF Push-rod Clamp No. 6841 is a compact push-rod clamp designed for fixture and workholding tasks where space is limited and consistent clamping force is required. Size 5 push-rod clamp Max clamping force 4,500 N 40 mm stroke for secure clamping Small angled foot for compact setups Consistent clamping power for reproducible processes The clamp delivers a maximum clamping force of 4,500 N, ensuring reproducible hold in repetitive operations. The integrated 40 mm stroke permits reliable engagement across variable workpiece heights, while the standard M12 x 50 pressure screw enables straightforward force transmission. These specifications support process stability and reduce rework, which in turn contributes to predictable cycle times and lower scrap rates. Compact mounting that optimises fixture layouts Thanks to the small angled foot, this clamp is suitable for tight jigs and assemblies where clearance is at a premium. The compact footprint allows for denser tool placement without sacrificing accessibility for loading and unloading. The design therefore supports efficient use of machine table real estate and simplifies fixture design for short-run and batch production. Robust mounting and straightforward integration into assemblies The unit includes a mounting thread M24 x 1.5 and metric attachment points that comply with common shop standards, easing installation into existing tooling plates. The durable mechanical concept is intended to withstand frequent actuation without complex maintenance, helping to keep machine downtime to a minimum. Spare parts such as the pressure screw are metric and readily replaceable, supporting long-term serviceability. Suitable applications and target environments This clamp is engineered for fixture building, general workholding and assembly fixtures in manufacturing environments that require compact, high-force clamping. The size and force characteristics make it suitable for metalworking jigs, testing rigs and production tooling where a secure, repeatable clamp is needed but space is restricted. The performance values support placement in both manual and automated stations. For robust, compact clamping choose AMF and contact Metav Werkzeuge in Emmerich for stock information and technical advice at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data SKU: 4000833519NW Type: 6841 Brand: AMF Product type: Push-rod clamp Execution: with small angled foot Packaging unit: 1 Facts Max clamping force: 4,500 N Holding force max: 4,500 N Stroke: 40 mm Pressure screw: M12 x 50 Size: 5 A: 16 mm B min: 41.5 mm B max: 81.5 mm D: 8.5 mm E: 50 mm H: 30 mm H1: 129.5 mm K: 15.5 mm L1: 171.5 mm L2: 25 mm M min: 29 mm M max: 46 mm M2: M24 x 1.5 N: 65 mm P: 35 mm Special features Small angled foot Size 5 Pressure screw M12 x 50 M24 x 1.5 mounting thread Compact design for tight fixtures FAQ What maximum clamping force does this clamp provide? The AMF Push-rod Clamp No. 6841 (SKU 4000833519NW) provides a maximum clamping force of 4,500 N. What is the available stroke of the clamping rod? The clamping rod has a stroke of 40 mm, allowing compensation for varying workpiece heights. Which pressure screw is fitted to the clamp? The unit is supplied with a pressure screw M12 x 50 for force transmission. How is the clamp mounted in a fixture? Mounting is via an M24 x 1.5 thread and standard metric interfaces compatible with common tooling plates. For which applications is this clamp intended? It is designed for fixture building, general workholding and assembly fixtures where compact dimensions and high holding force are required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm Push Rod Clamp No. 6842 Heavy Duty Tension/Compression 10,000 N Holding Force, 40mm Stroke - AMF
Benefit from a heavy‑duty, size 5 push‑rod clamp offering a 10,000 N clamping capacity and a 40 mm stroke for secure axial holding; order the push‑rod clamp directly via Metav Werkzeuge or contact our consultants for application advice. Push‑rod clamp No. 6842 — heavy duty, size 5 (AMF) The Push‑rod clamp No. 6842 is a heavy‑duty push/pull rod clamp designed for secure axial clamping in jigs, fixtures and repetitive production processes. Heavy‑duty design, size 5 Up to 10,000 N clamping force 40 mm stroke length M12 x 50 pressing screw Reliable axial clamping that reduces setup risk The rod clamp delivers a 10,000 N rated clamping force with a 40 mm stroke, providing consistent axial holding for production and assembly tasks. This performance translates into shorter cycle times and reduced rework, because the component is held securely during machining or joining operations. The design focuses on predictable force transmission and repeatability, so fixtures remain stable under load and downtime from loose workpieces is minimised. Robust construction for continual industrial use Built as a heavy execution in size 5, the unit is suited to demanding shop‑floor conditions. The clamp uses an M12 x 50 pressing screw and features adjustable mounting ranges (B min 58 mm, B max 98 mm) to accommodate different fixture geometries. These measurable dimensions simplify integration into modular tooling and make design verification straightforward when planning nests or dedicated fixtures. The combination of a compact footprint and clearly specified dimensions supports fast retrofitting into existing setups. Faster integration and dependable operation in production Integration is streamlined by clear, measurable geometry such as L1 174 mm and a consistent holding force 10,000 N, which aid layout calculations for indexing and movement clearance. The push/pull principle ensures a positive mechanical action for both pressing and withdrawing, which reduces adjustment needs and improves operator confidence. Reliable clamping contributes to higher first‑pass yield and a more efficient workflow on the shop floor, while the compact heavy‑duty design preserves valuable bench or fixture space. Contact Metav Werkzeuge for tailored procurement and technical guidance to secure the AMF push‑rod clamp No. 6842 for consistent, heavy‑duty fixture clamping. Technical data SKU: 4123680150NW Type: 6842 Product: Push‑rod clamp Brand: AMF Version: heavy Packaging unit: 1 Facts Max clamping force: 10,000 N Holding force: 10,000 N Stroke: 40 mm Pressing screw: M12 x 50 A: 16 mm B min: 58 mm B max: 98 mm C: 41 mm D: 8.5 mm E: 50 mm H: 38 mm H1: 137.5 mm K: 45 mm L1: 174 mm M min: 41 mm M max: 50 mm N: 71 mm P: 121 mm Special features Heavy duty execution, size 5 Push/pull operation Size designation: 5 M12 x 50 pressing screw FAQ What maximum clamping force does this clamp provide? The push‑pull rod clamp provides a maximum clamping force of 10,000 N; this is stated for the Push‑rod clamp No. 6842 (AMF, SKU 4123680150NW). What is the available stroke and how does it affect fixture design? The unit offers a 40 mm stroke, which allows for sufficient travel to accommodate workpiece tolerances and movement in fixtures when using the Push‑rod clamp No. 6842 (AMF). Which dimensions are most relevant for integrating the clamp into a jig? Key dimensions include L1 174 mm, B min 58 mm and B max 98 mm; these values support precise placement and mounting within fixture layouts using the AMF clamp. Is the clamp suitable for continuous production cycles? Yes, the heavy execution and rated holding force make the AMF push‑rod clamp No. 6842 suitable for repetitive industrial use, offering consistent performance in production environments. What fixing thread is used for the pressing screw? The pressing screw specification is M12 x 50, which simplifies replacement and integrates with standard fastening components for the AMF clamp. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm Push Rod Clamp Size 2 Small Angle Foot M6 Pressure Screw 2,000N Holding Force - AMF
Take advantage of a compact clamping solution that delivers 2,000 N holding force with a 26 mm stroke and a space-saving angled foot for flexible fixture layouts — order directly via Metav Werkzeuge or request advice from our consultants to ensure immediate integration into existing setups. AMF Push‑rod Clamp No. 6841 (Size 2) – small angled foot, 2,000 N holding force The AMF Push‑rod Clamp No. 6841 is a compact push‑rod clamping unit designed for medium‑duty fixturing, featuring a small angled foot that enables low-profile installation in confined work areas. Compact size small angled foot 2,000 N maximum holding force 26 mm stroke for secure clamping M16×1.5 threaded mount High clamping performance for reliable production flow The clamp provides a consistent maximum clamping force of 2,000 N, ensuring secure fixation during machining and assembly operations. With a 26 mm stroke and robust kinematics, the mechanism converts axial actuation into reliable clamp travel, supporting repeatable positioning and reduced rework. The technical design focuses on measurable performance so planners and purchasing can compare fixtures on objective criteria rather than subjective claims. Space‑saving mounting and straightforward integration The small angled foot reduces the required mounting envelope, allowing the unit to be fitted where vertical clearance is limited. Threaded mounting via M16×1.5 and the included contact screw M6×25 simplify attachment to plates and sub‑frames. Dimensional data such as A = 10 mm, B min = 32.5 mm to B max = 58.5 mm and L1 = 114 mm support precise CAD integration and ensure the clamp can be positioned without redesigning existing jigs. Robust operation and low maintenance for workshop reliability Constructed for frequent actuation and consistent holding force, the clamp requires minimal upkeep while delivering predictable behaviour over service life. The angled foot design helps protect the actuation elements from direct chip flow in many setups. Specified adjustment ranges (M min = 31.8 mm, M max = 36 mm) provide tolerance compensation during assembly, reducing setup time and supporting higher first‑time‑right rates on the shop floor. Contact Metav Werkzeuge for specification matching or to arrange delivery: info@metav-werkzeuge.com | +49 2822 7131930 — our consultants will advise on fixture planning and compatibility with existing equipment. Technical data Article number: 4000833517NW Type: 6841 Designation: Push‑rod clamp No. 6841 Size 2, small angled foot Manufacturer: AMF Product type: Push‑rod clamp Packaging unit: 1 Facts Maximum clamping force: 2,000 N Maximum holding force: 2,000 N Stroke (Hub): 26 mm A: 10 mm B min: 32.5 mm B max: 58.5 mm D: 5.6 mm E: 20 mm H: 20 mm H1: 85.5 mm K: 12.5 mm L1: 114 mm L2: 19 mm M min: 31.8 mm M max: 36 mm M2: M16×1.5 N: 50 mm P: 34 mm Special features Execution: with small angled foot Size: 2 Contact screw: M6×25 Type designation: 6841 Compact mounting footprint FAQ What is the maximum clamping force of this clamp? The AMF Push‑rod Clamp No. 6841 provides a maximum clamping force of 2,000 N, specified for consistent holding during common fixturing tasks. What stroke does the clamp offer and how does it affect fixture design? The clamp has a 26 mm stroke; this travel allows secure engagement and tolerance compensation within the stated M min/M max range, aiding precise fixture layout. Which mounting thread is required for installation? Mounting uses an M16×1.5 threaded interface (M2) and the unit includes a contact screw specified as M6×25 for local adjustments. Is the clamp suitable for tight installation spaces? Yes, the small angled foot reduces the vertical and lateral mounting envelope, making the unit suitable for restricted or compact fixture designs. How is repeatability and maintenance handled for this product? The clamp is engineered for frequent actuation with minimal routine maintenance; its mechanical design prioritises repeatable holding force and long‑term reliability. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Secure components with reliable workpiece clamps
Workpiece clamps, also known as workholding clamps or workholding devices, form the essential mechanical interface between machine and part in industrial fabrication. They keep components absolutely play-free, positionally accurate and vibration-resistant during milling, turning, drilling or grinding.
How workpiece clamps ensure process stability
A correctly specified clamping concept transfers the high cutting and feed forces of modern CNC machines into the machine table or spindle without deforming the part. The right combination of mechanical, hydraulic, pneumatic or magnetic solutions enables fast, repeatable setups and supports automated part change where required. Typical applications range from single-part turning to high-volume series milling and complex five-axis machining.
Concrete production benefits at a glance
- repeatable positioning: reduces scrap and rework
- high clamping forces: withstands aggressive cutting without part movement
- reduced set-up time: modular systems and quick-change features speed throughput
- improved surface finish: vibration damping for finer results and tighter tolerances
- flexible compatibility: vices, chucks, clamping plates and zero-point systems for diverse geometries
Why Metav's range is the practical choice
Metav combines decades of specialist know-how with a broad, handpicked range that democratises precision for workshops and industry alike. Based in Emmerich, Metav acts as a quality filter for the European market and supplies more than 250,000 products from precision metrology to complete workshop equipment. With the trust of over 48,000 customers, Metav offers a single-source approach that reduces supplier complexity and secures dependable delivery to your workbench.
Technical data
- function: mechanical interface between machine and workpiece
- primary requirements: absolute positional accuracy; vibration reduction; high clamping forces
- technologies: mechanical, hydraulic, pneumatic, magnetic
- typical components: machine vices; chucks; clamping plates; zero-point systems; pratzen; clamping jaws
- application areas: milling; turning; drilling; grinding; automated part change systems
- production benefits: reduced set-up time; enhanced process security; optimised series and single-part production
The practical summary
Workpiece clamps bring the stability and repeatability required to meet tight tolerances and excellent surface quality, making them indispensable across machining operations. Choosing the right workholding clamps and modular workholding devices is a decisive step towards higher productivity and consistent part quality.
FAQ
What types of workpiece clamps are suitable for automated machining?
Workholding clamps with quick-change modules, hydraulic actuation or magnetic systems are commonly used for automated machining. These workholding devices enable fast, repeatable part changes and integrate with zero-point systems.
How do workpiece clamps affect surface finish and tolerances?
A stable clamping concept minimises vibration and part movement; this improves surface finish and supports achieving narrow tolerances when using high-precision workpiece clamps or workholding devices.
Can the same workpiece clamps handle different part geometries?
Modular workholding clamps and adaptable clamping jaws allow flexible fixturing for varied geometries; combining vices, clamping plates and pratzen increases versatility on the shopfloor.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com