Secure and precise workholding for metalworking productivity
Workholding devices such as workpiece clamps and chuck systems provide absolute positional stability and vibration damping during milling, turning, drilling and grinding, ensuring parts remain free of play under high CNC cutting and feed forces. By transferring clamping loads into the machine table or spindle without deforming the component, a well engineered workholding solution improves machining accuracy, surface finish and process reliability while reducing set-up times. Modular systems from machine vices and chucks to zero-point systems and specialised fixtures enable fast changeovers and support both serial and single-part production, delivering consistent clamping force, repeatability and enhanced throughput.
150mm Swivel Assembly System Quick-Change Aluminium Housing, Indexable 4x90° - TECWERK
Combining the swivel indexing and interchangeable steel tool holders with an aluminium housing delivers a compact, robust mounting solution that enables safe, seconds-fast tool changes and minimal footprint; order the TECWERK mounting system directly via Metav Werkzeuge or consult our specialists for application advice. TECWERK Swivel Base Mounting System – Base Unit with Indexing The TECWERK swivel base mounting system is a compact clamping solution for secure and rapid exchange of tool holders in workshop and assembly environments. Swivel base with 4 x 90° indexing Aluminium housing, low space requirement Interchangeable steel tool holders Seconds-fast, secure tool change Speed up changeovers and keep production moving The swivel base is designed for fast tool changeovers, providing indexable positions that cut changeover time and reduce machine downtime. The unit’s indexable 4 x 90° arrangement offers repeatable, clearly defined tool positions, which simplifies process planning and minimises setup errors. With a form-fit fixing system, the mounting frame ensures that tools are held securely during operation, supporting consistent cycle times and reliable part quality. The overall result is a measurable improvement in operational throughput and predictable production flow. Robust, compact construction for confined workspaces A lightweight aluminium housing combines corrosion resistance with stiffness, allowing the unit to be installed where space is limited without compromising rigidity. The compact footprint makes the mounting frame suitable for dense tooling stations and multi-spindle arrangements. The construction reduces the need for additional clearance and enables closer placement of fixtures, supporting more efficient use of floor and workbench space while maintaining the structural properties required for accurate positioning. Preserve tool integrity and ensure repeatable accuracy The mounting system features interchangeable steel tool holders and a form-fit fixation that prevents slippage and avoids damage to the spindle taper. By eliminating direct cone abrasion, the design extends the service life of both tools and machine interfaces, lowering maintenance frequency and cost. The positive-lock clamping principle supplies consistent concentricity and repeatability, which is essential for applications where tool runout and positioning precision affect part tolerances. Ergonomic handling for faster, safer workflows Ergonomics are built into the device to reduce operator effort during tool changes, requiring lower handling force and enabling safe, efficient swaps in seconds. The pivoting base allows simple access to each indexed position, while the quick-release concept lowers the physical strain associated with repetitive changes. These features support higher uptime and a better working environment, helping teams to maintain pace without sacrificing safety or introducing handling-related errors. Choose the TECWERK swivel base unit for compact, reliable tool changes and contact Metav Werkzeuge for tailored advice and supply from Emmerich. Technical data Article number: 2000832115NW Manufacturer: TECWERK Product type: Mounting system – base unit (swivel) Facts Indexing positions: 4 x 90° Packaging unit: 1 Special features Aluminium housing Interchangeable steel tool holders Swivelable and indexable Form-fit fixation of tools No spindle taper damage Low space requirement Reduced handling force through ergonomic design Tool change in seconds FAQ How is the indexing arranged and how many positions are available? The unit offers an indexable arrangement with four positions at 90° increments, enabling clear, repeatable tool locations for the TECWERK swivel base mounting system (SKU 2000832115NW). Can the system prevent damage to the machine taper? Yes, the mounting solution uses a form-fit fixation that avoids cone abrasion, so the design protects the spindle taper and prolongs interface life. What materials are used for the housing and tool holders? The base features an aluminium housing for a compact, rigid assembly, while the tool holders are supplied as interchangeable steel components for durability and precision. Is the mounting system suitable for small workshops with limited space? The compact design and low footprint make the unit suitable for confined work areas where space efficiency is required without loss of functionality. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
150mm T-Slot Plate 22x60x150mm M12x1.75 Thread SS41C Steel - Vertex
Combining robust SS41C construction, a compact 22 x 60 x 150 mm footprint and a secure M12x1.75P threaded fixing results in a reliable clamping solution for workshop tables; order the plate directly via Metav Werkzeuge or consult our technical advisers for precise integration into existing fixturing setups. T-slot plate TP-150-22 — Compact SS41C fixture plate with M12 thread (Vertex) The T-slot plate TP-150-22 is a compact clamping plate designed for secure fixture mounting on machine tables, providing a consistent and space-efficient interface between workpieces and table slots. Robust SS41C steel construction Secure M12x1.75P threaded fixing Compact 22 x 60 x 150 mm footprint Weighs only 1.6 kg for easy handling Reliable clamping that reduces setup time The plate's T-slot geometry and threaded fixing permit quick, repeatable attachment to standard table slots, translating into measurable time savings during frequent job changes. Built from SS41C, the plate resists deformation under load, which maintains repeatability and ensures consistent alignment between setups. The compact footprint suits constrained workspaces while still offering a stable contact surface for common clamping bolts and fixtures. Engineered for workshop compatibility and durability Designed with a standard M12x1.75P thread, the fixture plate integrates seamlessly with common clamping hardware and threaded elements, reducing the need for specialist fasteners. The combination of the T-slot interface and the threaded fixing provides a secure connection that minimises micro-movement during machining operations, supporting higher process stability and lower scrap rates. The steel grade and solid construction deliver longevity under regular workshop use. Practical handling and straightforward integration At 1.6 kg, the plate is easy to manoeuvre during machine setup and repositioning while remaining substantial enough to resist shifting during operations. The clearly defined 22 x 60 x 150 mm dimensions simplify planning for fixture layouts and help with quick compatibility checks against machine table specifications. Where repeatable positioning is required, the plate supports a modular approach to fixturing, enabling efficient use of standardised clamps and accessories. Quality assurance and a partner for precision Manufactured by Vertex to industry-focused specifications, the plate benefits from established production controls and traceability. When combined with Metav Werkzeuge’s distribution and advisory services, buyers gain access to a broader quality filter for European workshops, including practical advice on selecting complementary clamping elements. The result is a small but effective component that contributes to a dependable production flow. For tailored advice on integrating the TP-150-22 into a specific machine table or to request technical clarification, contact Metav Werkzeuge and speak with our specialists who can assist with compatibility and application details Technical Data SKU: TP-150-22 GTIN: 4061905095214 Manufacturer: Vertex Material: SS41C Dimensions: 22 x 60 x 150 mm Weight: 1.6 kg Thread: M12x1.75P EClass: 23360290 Facts Dimensions (mm): 22 x 60 x 150 Weight (kg): 1.6 Thread: M12 x 1.75 EClass: 23360290 Special features T-slot design for table clamping Solid SS41C steel construction M12x1.75P threaded fixing Compact fixture plate for machine tables SKU TP-150-22 FAQ What material is the plate made from? The TP-150-22 is made from SS41C steel, providing a robust base material for workshop clamping and durable performance in standard fixturing tasks. Which thread specification does the fixture plate use? The plate uses an M12x1.75P threaded fixing, compatible with common M12 clamping bolts and accessories. What are the plate dimensions and weight? Dimensions are 22 x 60 x 150 mm and the weight is 1.6 kg, making the plate compact yet substantial enough for secure fixturing. Is the plate supplied by a recognised manufacturer? Yes — the fixture plate is manufactured by Vertex and sold under SKU TP-150-22, ensuring traceability and adherence to industrial standards. Can this plate be used with standard T-slot tables? The T-slot geometry and M12 threaded fixing are designed for straightforward mounting to standard machine table slots; verify table slot dimensions to ensure precise fit. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
150mm Tailstock For BS Lathe Centre With 155x110mm Base - Vertex
Take advantage of a compact, heavy-duty design that combines a 150 mm centre height with a 155 x 110 mm base for reliable support and improved concentricity; order directly via Metav Werkzeuge or consult the team for compatibility advice. Tailstock for BS — 150 mm centre height, 155 x 110 mm base (Vertex) A Tailstock for BS designed as a lathe accessory to support long or slender workpieces during turning operations, improving tool engagement and runout control. 150 mm centre height for standard lathes Base 155 x 110 mm for stable mounting Solid 5.3 kg construction for vibration damping Compatible with BS lathes, Vertex quality Stable support for accurate turning The robust centre configuration with a 150 mm centre height provides a clear datum for turning tasks, ensuring consistent support at the correct axis. By combining a compact footprint with mass, the assembly reduces micro‑movement and supports precision machining. The relatively heavy build helps with vibration damping, which in turn promotes smoother surface finishes and reduces the need for repeated rework. For users less familiar with lathe terminology, "centre height" denotes the vertical distance from the machine bed to the rotational centre — a critical value for aligning workpieces and keeping cutting forces consistent. Quick set‑up and dependable mounting The 155 x 110 mm base gives a defined contact area for secure fixing to the lathe carriage or tool post, shortening alignment time and improving repeatability between set‑ups. The increased mass of 5.3 kg contributes to a stable working condition without requiring complex anchoring, while the simple mounting footprint supports straightforward integration into existing BS lathe configurations. This pragmatic approach reduces idle time between jobs and supports higher throughput in smaller workshops where space and changeover speed matter. Workshop resilience and long‑term reliability Built as a purpose‑made lathe accessory, the unit focuses on essential mechanical performance rather than excessive complexity. The design emphasises operational reliability and minimal maintenance, making it suitable for routine turning and light production work. The combination of compact dimensions and solid construction results in a dependable component that maintains alignment across typical workshop use cycles, supporting consistent part quality and fewer stoppages for adjustment. For specification guidance or to secure supply of this Vertex tailstock, contact Metav Werkzeuge in Emmerich for personalised advice and order handling (info@metav-werkzeuge.com / +49 2822 7131930). Technical data Article number: BS-2A-TS GTIN: 4061905092886 Manufacturer: Vertex Core data Centre height: 150 mm Base footprint: 155 x 110 mm Weight: 5.3 kg SKU: BS-2A-TS Special features Compatible with BS lathes Thumbnail image available (bs-0-ts-main.jpg) Brand: Vertex FAQ What type of machines is this tailstock compatible with? The tailstock is specified for use with BS lathes and is designed to match the carriage and mounting arrangements typically found on that machine family. How does the centre height affect machining? A 150 mm centre height sets the rotational axis for the workpiece; the correct centre height ensures the cutting tool meets the workpiece at the intended plane, improving concentricity and surface finish when using the tailstock. Is the tailstock heavy enough to reduce vibration during turning? With a mass of 5.3 kg and a compact base, the tailstock provides inherent vibration damping that helps to stabilise long or slender workpieces during light to medium turning operations. Are mounting details provided for installation on the lathe? Mounting is governed by the base footprint of 155 x 110 mm; this dimension supports secure placement on compatible BS lathe carriages or fixture plates and aids reproducible alignment. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
150mm Tailstock for BS Lathe With 155x110mm Base 5.3kg - Vertex
Tailstock with a compact footprint and stable support that improves turning accuracy; suitable for BS-series setups with a 155 x 110 mm base and 150 mm height. Benefit from Vertex manufacturing quality combined with Metav Werkzeuge’s reliable supply—order the BS-1-TS directly via Metav Werkzeuge or consult our specialists for application-specific advice. Tailstock for BS (BS-1-TS) by Vertex — 150 mm height, 155 x 110 mm base Tailstock for BS (BS-1-TS) by Vertex is a robust support accessory designed for lathe applications in workshop and industrial environments, offering a compact footprint and precise axial support for short to medium-length turning tasks. Compact 155 x 110 mm base for secure mounting 150 mm centre height for standard lathe configurations Stable weight of 5.3 kg for vibration damping Vertex manufacturing standards, suitable for workshop use Increased stability for consistent turning results A solid mounting footprint improves process stability and contributes directly to precision in turning operations. The compact 155 x 110 mm base distributes clamping forces and reduces micro-movements during machining, which helps maintain concentricity and surface finish. Where set-up consistency matters, this support reduces rework and contributes to predictable throughput. The unit’s mass (approx. 5.3 kg) acts as a passive damper to vibration, supporting longer tool life and steadier feed rates across runs. Compact design that integrates easily into existing setups With a 150 mm centre height the accessory sits well within common lathe configurations, enabling quick integration without major set-up changes. The compact footprint suits dense workshop benches and reduces interference with tooling or fixtures, so installation and removal are straightforward. This design focuses on practical benefits: faster changeovers, fewer fixture clashes and a reduced need for bespoke adapters, helping to keep machining cycles efficient and predictable. Built to the Vertex standard for reliability and traceability Manufactured under Vertex quality controls, the component is produced for durability and consistent performance. The robust construction supports repetitive tasks and helps maintain alignment over time. For procurement, the clear SKU BS-1-TS and GTIN establish traceability for inventory and maintenance records. Choosing components built to known production standards reduces uncertainty in supply and supports scheduled maintenance planning. Practical workshop advantages and supply assurance Sourcing through Metav Werkzeuge provides an operational advantage: centralised access to a wide catalogue plus localised stock management from Emmerich ensures dependable delivery. The combination of a compact, stable support unit and a reliable supply chain reduces planning overheads and secures access to precision components when replacements or upgrades are required. This approach helps shops maintain uptime and meet production targets with less administrative effort. Contact Metav Werkzeuge to specify the Vertex BS-1-TS tailstock for an optimised turning setup and to discuss compatibility with existing BS-series equipment Technical data Article number: BS-1-TS GTIN: 4061905093920 Manufacturer: Vertex Facts Height: 150 mm Base footprint: 155 x 110 mm Weight: 5.3 kg EClass: 36600102 Special features Designed for BS series applications Robust construction for workshop use SKU: BS-1-TS FAQ What is the centre height of the tailstock? The centre height is 150 mm, which suits standard lathe configurations and is specified for the Vertex BS-1-TS tailstock. Which footprint is required for mounting? Mounting requires a clear area of 155 x 110 mm for the base to ensure secure attachment and stable support during turning. Is this tailstock suitable for heavy-duty turning? The Vertex BS-1-TS is built for stable support in workshop and industrial environments; its weight and base design provide vibration damping for typical turning tasks. How is the product identified for ordering and stock control? Order and inventory identification use SKU BS-1-TS and GTIN 4061905093920 for traceability and procurement. Can this component be integrated into existing BS-series setups? Yes, the tailstock is specified for BS-series applications and is designed for straightforward integration with compatible setups. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
150mm Tailstock for BS Model, 155x110mm Base, 5.3kg - Vertex
Take advantage of the 150 mm centre height and the compact 155 x 110 mm base to increase turning stability and repeatability in light to medium workshop tasks; the robust 5.3 kg construction contributes to reduced vibration during machining. Order the tailstock directly via Metav Werkzeuge or contact the technical consultants for application advice. Tailstock BS-2-TS — Lathe tailstock with 150 mm centre height by Vertex The Tailstock BS-2-TS is a lathe tailstock designed for BS series lathes, offering a compact footprint and elevated support for shafts and long workpieces in general workshop turning operations 150 mm centre height Compact 155 x 110 mm base Stable 5.3 kg construction Suitable for BS lathe models Improved turning accuracy through stable support A dedicated tailstock provides a fixed reference point against which a workpiece is supported; the BS-2-TS’s 150 mm centre height ensures alignment with standard lathe centres, minimizing deflection during machining. The combination of a small 155 x 110 mm base and substantial mass contributes to stability without occupying excessive carriage space, enabling more consistent surface finishes and concentricity. For operators seeking measurable improvements in repeatability, this support reduces the influence of spindle runout and workpiece overhang, translating into fewer rework cycles and a steadier production flow. Reliable workshop integration and operational benefits The compact design permits straightforward mounting on compatible machines while the 5.3 kg mass adds damping that benefits light to medium turning tasks. Compatibility with BS lathe models means the unit can be integrated into existing set-ups with minimal modification, supporting tasks such as through-turning, facing and support for long shafts. Where concentricity and reduced chatter are priorities, the tailstock delivers a pragmatic upgrade to workshop capability, giving a direct, technical route to improved process reliability and part quality. Practical considerations for selection and use The BS-2-TS tailstock is intended as a pragmatic accessory that complements existing lathe tooling and workholding. The compact base footprint simplifies positioning and clamping; centre height specification provides a clear parameter for assessing fit on a given machine. For less experienced staff, the function is straightforward: provide axial support to prevent deflection. For planners and supervisors the asset contributes to a reduction in scrap and rework through enhanced precision and repeatable positioning, yielding efficiency gains across batch processes. Contact Metav Werkzeuge to discuss suitability for specific BS lathe models or to request a project-oriented quotation; Metav’s consultants can advise on integration from stock in Emmerich Technical data SKU: BS-2-TS GTIN: 4061905092978 ECLASS: 36600102 Manufacturer: Vertex Facts Centre height: 150 mm Base footprint: 155 x 110 mm Weight: 5.3 kg Special features Compatible with BS lathe models Compact footprint for flexible positioning Robust mass for vibration damping FAQ Which machines is this tailstock compatible with? The BS-2-TS tailstock is designed for compatibility with BS series lathes and fits applications where the specified centre height and base footprint match the machine geometry What is the centre height of the tailstock? The centre height is 150 mm, ensuring alignment with lathes set up to that standard How heavy is the unit? The tailstock has a mass of 5.3 kg, which contributes to damping and stability during turning Can the tailstock support long workpieces for facing and turning? Yes, the BS-2-TS provides axial support suited to through-turning and facing tasks where additional workpiece support reduces deflection and improves finish quality Who manufactures the tailstock and what is the SKU? The unit is manufactured by Vertex and is listed under SKU BS-2-TS Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
150mm Thread Cutting Chuck Synchronised DIN 1835 B+E With Coolant Feed, Compensation ±0.5mm - TECWERK
Take advantage of the combination of precise synchronisation, robust clamping and integrated coolant management for reliable thread production on CNC machines; order directly via Metav Werkzeuge or consult Metav’s specialists for application support. TECWERK synchronised thread‑cutting chuck DIN 1835 B+E – Weldon shank, coolant feed The TECWERK synchronised thread‑cutting chuck DIN 1835 B+E is a purpose‑built clamping solution for CNC machines with synchronised thread‑cutting spindles, optimised for M3–M20 threading tasks Weldon shank to DIN 1835 B+E Integrated coolant feed Compensates synchronization errors ±0.5 mm Supports right‑ and left‑hand threads Consistent synchronisation reduces rejects and downtime The synchronised chuck is engineered to compensate pitch differences between the tap and the machine spindle, which significantly reduces the risk of cross‑threading and broken taps. By allowing a length compensation of ±0.5 mm, the device absorbs minor timing mismatches that can occur during synchronous thread cutting. This mechanical tolerance translates into fewer scrapped parts and a steadier production flow, particularly where high repeatability is required. The DIN standardised interface ensures predictable behaviour when integrated with existing CNC synchronised spindles. Industrial build for secure clamping and precision Designed with a Weldon shank to DIN 1835 B+E, the chuck delivers a reliable mechanical interface for automated toolholders. The construction promotes high runout accuracy, which is essential for thread geometry and surface finish. Clamping is achieved through a tensioned tap collet with an integrated square, producing high clamping force and secure tool retention even under axial loads. This combination of features enables steady performance in repetitive operations and supports long tool life by limiting unwanted vibration and movement. Coolant control and versatile thread capability An integrated coolant feed permits through‑tool lubrication and improved chip evacuation, reducing heat build‑up and wear on cutting edges. The chuck is dimensioned for a broad thread range (M3–M20) and supports both right‑ and left‑hand threads, making it suitable for diverse production demands without frequent tooling changes. For users processing small to medium metric threads, the design balances flexibility and process reliability: coolant management improves cutting conditions, and the mechanical compensation feature maintains profile accuracy across varying pitch leads. Simple integration and dependable operation Compatibility with DIN 1835 B+E interfaces and a compact nominal outer diameter ensure straightforward mounting in most synchronised tooling setups on CNC machines. The unit is intended for use with a synchronised thread‑cutting arrangement and will typically replace a standard chuck where pitch mismatch or spindle synchronisation problems occur. For workshops seeking a dependable clamping solution, this synchronisation compensating chuck offers a direct performance uplift without complex retooling. Metav’s role as a precision partner provides further assurance: decades of distribution experience and a broad product range support seamless procurement and stocked availability for production needs. Contact Metav Werkzeuge today for tailored advice on integrating the TECWERK synchronised thread‑cutting chuck into an existing synchronised CNC setup and to discuss suitable collets and mounting options. Technical data Article number: 2000834905NW Designation: Gewindeschneidfutter Synchron DIN 1835 B+E M3-M20 Schaft D.20mm A. L.63mm TW Brand: TECWERK Packaging unit: 1 Core specifications Outer diameter: 42 mm Shank diameter: 20 mm Length A: 63 mm Length compensation: +0.5 / −0.5 mm Thread range: M3–M20 Standard: DIN 1835 B+E Special features Weldon shank to DIN 1835 B+E Integrated coolant feed Compensates pitch differences of tool and synchronised spindle Suitable for CNC machines with synchronised thread‑cutting equipment Compensates synchronisation errors under thrust and pull Suitable for right‑ and left‑hand threads High runout accuracy High clamping force via tensioned tap collets with integrated square FAQ What machines is this chuck designed for? The TECWERK synchronised thread‑cutting chuck is designed for CNC machines fitted with a synchronised thread‑cutting spindle and a DIN 1835 B+E interface. Can the chuck handle left‑hand threads? Yes, the chuck supports both right‑hand and left‑hand threading applications for versatile shop use. How much synchronisation error can it tolerate? The chuck compensates synchronisation errors up to ±0.5 mm, which absorbs small timing mismatches during synchronous cutting. Does the chuck allow coolant through the tool? The unit includes an integrated coolant feed to support through‑tool lubrication and improved chip evacuation. Which thread sizes are supported? The clamping system is specified for metric threads from M3 to M20, covering common production ranges. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund
150mm Tool Holder For Boring Bars E2 With Through Coolant, VDI40 DIN 69880 - TECWERK
Take advantage of a secure, standardised VDI40 clamping solution combined with through‑coolant capability and a design that removes the need to shorten boring bars, improving setup speed and process reliability; order the holder directly via Metav Werkzeuge or consult our specialists for integration advice. TECWERK Tool Holder for Boring Bars E2 — VDI40, Through‑Coolant, 10 mm The TECWERK tool holder E2 is a VDI40 clamping solution for boring bars, designed to deliver secure clamping, internal and external coolant supply and plug‑and‑play compatibility with DIN 69880 systems. Form E2 with VDI40 taper Through‑coolant, internal and external supply Suitable for 10 mm boring bars No shortening of boring bar required Secure clamping and standardized compatibility for predictable results The E2 configuration with VDI40 taper ensures a stable and repeatable interface with machine turrets and tool posts. Conformance to DIN 69880 provides compatibility across a wide range of toolholders and boring bar systems, reducing set‑up errors and interchange costs. The clamping geometry is engineered to maintain concentricity under cutting loads, which supports consistent run‑out values and helps protect spindle bearings. For production environments where tool change frequency and repeatability matter, this holder offers measurable gains in process control and part quality. Faster set‑up and improved coolant performance for higher productivity A through‑drilled design supplies internal and external coolant, optimising chip evacuation directly at the cutting edge and extending tool life by keeping working temperatures down. Because the holder is specified for use with a 10 mm boring bar in a cylindrical shank configuration, no shortening of the boring bar is required, saving preparation time and reducing handling. The combination of direct coolant feed and reduced preparatory work translates into shorter cycle interruptions and a more efficient workflow on the shop floor. Practical benefits for workshops and production lines The holder’s construction focuses on practical usability: a cylindrical shank, a through‑coolant bore and the E2 clamping form simplify both installation and maintenance. Operators gain from easier alignment and fewer adjustments during initial trials, while maintenance teams value the straightforward geometry when inspecting or replacing components. The design supports stable cutting conditions, making it suitable for precision boring tasks where surface finish and dimensional accuracy are required. Clear standards and proven mounting principles reduce the learning curve for new staff and support predictable outcomes over many production runs. For tailored advice on integrating this VDI40 E2 tool holder from TECWERK into existing setups, and for swift supply from Metav Werkzeuge in Emmerich, contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 for a personalised recommendation and delivery options Technical data Article number: 2000833679NW SKU: 2000833679NW Form: E2 Product type: Tool holder for boring bars Manufacturer: TECWERK Packaging unit: 1 Facts d2: 10 mm h1: 32.5 mm d1: 40 mm d8: 55 mm l6: 75 mm l3: 22 mm d6: 83 mm Special features Through‑drilled (yes) Internal and external coolant supply Cylindrical shank No boring bar shortening required Complies with DIN 69880 Suitable for boring bars FAQ Is this holder compatible with standard VDI40 turrets? Yes. The holder is a VDI40 E2 configuration that complies with DIN 69880 and is intended for integration with standard VDI40 turrets and tool systems. Can coolant be delivered directly to the cutting edge? Yes. The through‑drilled design provides internal and external coolant supply to aid chip evacuation and temperature control at the cutting zone. Does the boring bar need to be shortened before installation? No. The holder is designed so that no shortening of the boring bar is required, which reduces set‑up time and preparation work. What bar diameter is this holder specified for? The holder is specified for a 10 mm boring bar (d2 = 10 mm) and accepts a cylindrical shank for that diameter. Which standard ensures interchangeability with other holders? Compliance with DIN 69880 ensures standardised interfaces and interchangeability across compatible toolholders. Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund
150mm Tool Holder SK50 Compact 6-Unit Impact-Resistant Polypropylene, Black - TECWERK
Take advantage of a compact, SK50-compatible storage system that combines impact‑resistant polypropylene construction with chemical resilience and space-saving dimensions for streamlined tool handling; order directly via Metav Werkzeuge or request consultancy for system integration. Tool holder SK50 — compact 6‑slot polypropylene tray by TECWERK The Tool holder SK50 organises SK50 taper tool shanks in a compact, chemical‑resistant polypropylene tray designed for workshop and CNC storage. Compact 6‑slot design for SK50 tapers Polypropylene, impact and break resistant Acid and coolant resistant material Space‑saving dimensions 390×260×150 mm Organised storage that speeds up changeovers A well-ordered tooling area reduces machine downtime and accelerates set‑up procedures. The compact tray provides six dedicated positions for SK50 tapers, enabling quick visual checks and immediate access to the required shank. By keeping holders secured in a single, marked tray, the risk of damage during staging is reduced and tool change routines become more predictable, which supports higher workshop throughput and more efficient shift planning. Robust polypropylene construction for harsh shop environments Made from polypropylene, the tray resists impacts and breakage while maintaining shape under frequent handling. The material’s acid and coolant resistance prevents degradation in environments where lubricants and machining fluids are present. For workshops requiring a low‑maintenance storage solution, this robustness translates into a longer service life and fewer replacements, lowering total cost of ownership through reliable, uninterrupted use. Clear compatibility and practical dimensions for integration With external dimensions of 390×260×150 mm, the tray fits standard tool cupboards and workbench shelves without occupying excess space. The dedicated interface for SK50 taper shanks ensures secure seating and minimal lateral movement, protecting precision alignment during storage. The low weight of approximately 0.55 kg makes handling and repositioning straightforward while preserving stability when loaded with holders. Practical benefits for production and workshop management Beyond storage, the tray supports orderly logistics: centralised tool staging, easier inventory checks, and simplified transport between storage and machines. The compact design allows multiple trays to be stacked or lined up, creating modular storage arrays. Backed by Metav’s focus on accessible precision and a European quality‑filter located in Emmerich, this solution fits both independent workshops and production lines seeking dependable, easy‑to‑implement tooling organisation. For a tailored recommendation or to procure this TECWERK SK50 tool holder directly from Metav Werkzeuge’s Emmerich warehouse, contact our consultants for practical advice and delivery options Technical data Article number: 9000453682NW Manufacturer: TECWERK Product type: Werkzeugträger Facts Width: 390 mm Depth: 260 mm Height: 150 mm Weight: 0.55 kg Packaging unit: 1 Special features Material: polypropylene Colour: black Design: compact 6‑slot Tool interface: SK50 taper Properties: impact and break resistant Chemical resistance: acid and coolant resistant FAQ Is this tray compatible with all SK50 toolholders? The tray accepts SK50 taper shanks; compatibility depends on holder diameter and flange design, but it is designed specifically for standard SK50 interfaces and typical holder profiles. How durable is the polypropylene in a coolant‑exposed environment? Polypropylene used in this tray is acid and coolant resistant, so the material withstands common machining fluids and daily workshop exposure without rapid degradation. Can multiple trays be stacked or stored together? The compact dimensions and low weight allow modular arrangement; trays can be placed side by side or stacked where shelving accommodates the combined height. What are the transport and handling advantages of the tray? At approximately 0.55 kg, the tray is easy to handle when staging tools between storage and machine, and the individual slots secure shanks to reduce handling damage. Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund
150mm Toolholder Adapter For C Steel Toolholder Head, 32mm Shank Height - TECWERK
Benefit from robust compatibility with C-type steel holder heads and a precise 32 mm clamping height for dependable turning setups; order the quick-change holder directly via Metav Werkzeuge or consult the specialists if technical clarification is required. TECWERK quick-change toolholder for steel holder head C — 32 mm clamping height The TECWERK quick-change toolholder is a compact solution for workshop turning applications, designed to accept C-type steel holder heads and to support turning bars with a reliable clamping height of 32 mm. Quick-change toolholder for steel head C Clamping height 32 mm for standard set-up Overall length 150 mm for stable reach Robust construction for workshop turning Consistent set-ups that reduce machine downtime The quick-change design combines straightforward handling with repeatable positioning, enabling faster tool swaps and fewer re-alignments. Compatibility with the steel holder head C and a defined 32 mm clamping height simplifies fixture planning and minimises setup variation between operations. For production environments where cycle time and reproducibility matter, this holder supports a smoother workflow and fewer interruptions. Stability and reach for reliable turning performance With an overall length of 150 mm, the holder offers sufficient reach for common lathe configurations while maintaining rigidity at the cutting point. The elongated construction balances accessibility and stiffness, which helps to reduce chatter and improve surface finish in turning tasks. The combination of reach and stable clamping contributes directly to process reliability and consistent part quality. Designed for turning bars with clear mounting parameters Intended specifically for use with turning bars, the toolholder accepts the established C-type steel head interface and provides a known clamping datum at 32 mm. Explaining the clamping height: it denotes the vertical distance from the mounting datum to the cutting edge plane, a decisive dimension for turret and toolpost alignment. Specifying this parameter up front simplifies machine setup and avoids trial-and-error adjustments during production changeovers. Practical considerations and workshop integration The unit arrives as a single packing item and integrates into standard turning setups that use steel holder head C connections. Given the defined interface and measured dimensions, the holder is suited to systematic tool management and can be incorporated into visual tool lists or machine set-up sheets. For specialised applications or unusual tool geometries, technical clarification can be obtained to ensure correct fitment and optimal performance. Contact Metav Werkzeuge for tailored technical advice or to order the TECWERK quick-change toolholder with 32 mm clamping height — email info@metav-werkzeuge.com or call +49 2822 7131930 for prompt assistance Technical Data Article number: 2000832159NW Manufacturer: TECWERK Product type: Quick-change holder Facts Overall length: 150 mm Clamping height: 32 mm Packing unit: 1 Applications / Features For turning tools Compatible with steel holder head C Suitable for workshop turning operations FAQ Is this holder compatible with a C-type steel holder head? Yes. The quick-change toolholder is designed to accept a steel holder head C, providing a defined interface for straightforward mounting. What is the clamping height and why does it matter? The clamping height is 32 mm, indicating the vertical datum to the cutting edge plane; this dimension ensures correct tool alignment in the turret or toolpost. What is the overall length and how does that affect operation? The overall length is 150 mm, which gives adequate reach while maintaining rigidity to support stable turning and improved surface finish. Is the holder suitable for turning bars or indexable insert systems? The holder is intended for use with turning bars and the C-type steel head interface; specific indexable systems should be checked for compatibility against these mounting parameters. Which SKU identifies this product for ordering? This component is listed under SKU 2000832159NW and is supplied as a single packing unit for workshop use. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
150mm Toolholder For Steel Holder Head C With 40mm Clamping Height - TECWERK
Take advantage of the holder’s quick-change interface, precise 40 mm clamping height and 150 mm overall length for stable, repeatable turning operations; order the part directly via Metav Werkzeuge or request advice from our consultants. Interchangeable holder for steel holder head C — clamping height 40 mm (TECWERK) The Interchangeable holder for steel holder head C (clamping height 40 mm) is a quick-change tool holder designed for use with turning tool bits in precision turning applications, offering consistent seating and reliable alignment for production and workshop environments. Quick-change interface for tool posts Compatible with steel holder head C Clamping height 40 mm Overall length 150 mm Faster changeovers for uninterrupted production The quick-change design reduces non-productive time by enabling rapid replacement of tool carriers while maintaining positional accuracy. By combining a quick-change interface with a defined clamping height 40 mm, the holder supports predictable set-up routines and shorter cycle interruptions, which contributes directly to higher throughput and leaner workflows in jobbing and serial turning. Stable clamping for consistent surface finishes Engineered for use with turning tool bits, the holder gives a defined contact plane to the steel holder head C, improving repeatability and limiting micro-movement under load. This results in more consistent surface quality and reduced rework. The combination of precise seating and a measured 150 mm overall length helps preserve cutting geometry, so finishing passes remain uniform across batches. Seamless integration with existing posts and tool systems Compatibility with the steel holder head C minimises spare-part variety and eases integration into established quick-change tool posts. The standardised clamping height simplifies tool-setting procedures on lathes and reduces the need for individual shimming. Workshops benefit from reduced stocking complexity and quicker exchange routines, which in turn supports shorter lead times and predictable delivery performance. Built for workshop resilience and dependable results The holder is intended for everyday use in trade and industrial workshops, where robustness and reliable seating matter more than unnecessary complexity. Its straightforward function for turning tool bits focuses on delivering stable cutting conditions and reliable alignment, supporting both single-item precision work and repetitive production runs without elaborate maintenance procedures. For dependable quick-change performance from TECWERK, request this interchangeable holder via Metav Werkzeuge for tailored advice and fast supply; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 2000832160NW Product type: Interchangeable holder Manufacturer: TECWERK Dimensions / Core data Overall length: 150 mm Clamping height: 40 mm Packaging unit: 1 Compatibility / Special features Execution: for turning tool bits Suitable for: steel holder head C SKU: 2000832160NW FAQ What does the clamping height indicate for this holder? The clamping height of 40 mm indicates the defined seating level for the tool carrier and is essential for consistent tool geometry and repeatable set-up when using the interchangeable holder. Is the holder compatible with existing quick-change systems? Yes, the holder is designed for integration with the steel holder head C and standard quick-change tool posts to reduce set-up time and simplify spare-part management. Which applications is this holder intended for? This holder is intended for turning operations with turning tool bits, suitable for both workshop and small-series industrial turning tasks where rapid changeovers and repeatability are required. How does the overall length affect tool setup? The 150 mm overall length helps determine tool overhang and rigidity; it supports stable cutting conditions and predictable tool projection for consistent turning results. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
150mm Tooth-Ring Drill Chuck Prima Keyed 1.0-16mm B18 Reversible Right-Hand - RÖHM
Robust clamping and impact resistance ensure reliable, repeatable drilling in stationary applications; the 1.0–16 mm clamping range together with a B18 taper and keyed S3 operation provide secure tool retention and simple handling. Order the Prima geared drill chuck directly via Metav Werkzeuge or contact our consultants for specification support. Prima Geared Drill Chuck — B18 taper, 1.0–16 mm clamping range (RÖHM) The Prima geared drill chuck is a heavy-duty, keyed chuck for stationary machines, designed for right-hand rotation and fitted to a B18 arbor for secure mounting. Heavy-duty industrial construction Clamping range 1.0–16 mm B18 taper for stable mounting Impact-resistant with S3 key Precision clamping for consistent drilling results The geared chuck offers precise clamping across its 1.0–16 mm range, which keeps centre runout low and maintains repeatability in batch drilling tasks. The geared mechanism multiplies hand torque, enabling consistent tightening without excessive effort; this is particularly useful when operating larger-capacity chucks on bench or floor drills. By choosing a keyed, geared solution, operators benefit from reproducible clamping force that reduces tool slippage and improves hole quality, making the chuck suitable for production and maintenance workshops where reliability matters. Built for heavy-duty, stationary use Constructed as a heavy industrial version for stationary machines, this chuck is impact-resistant and compatible with hammer-action environments while remaining optimised for standard drilling spindles. The inclusion of a DIN 238 taper ensures a stable connection to the machine spindle, reducing runout and vibration under load. Such mechanical robustness lengthens service intervals and reduces unplanned downtime, which is a tangible productivity advantage in workshop and light-industrial settings where machines run for extended periods. Simple, secure keyed operation for safe handling Keyed operation with a S3 key delivers fast, secure tightening and straightforward maintenance. The key-controlled tightening method provides greater clamping torque than a plain hand-tight chuck, ensuring firm engagement with the drill shank and minimising the risk of slippage during arduous tasks. The keyed interface is also easier to inspect and service: worn teeth can be identified and serviced promptly, supporting safe operation and predictable performance in repeated-use environments. Compatibility and mounting explained for clearer integration Fitted to a B18 arbor and designed for right-hand rotation, this geared drill chuck integrates directly with many standard spindles and arbors used in workshop drill presses and pillar drills. The taper conforms to established standards, simplifying changeover and alignment. When specifying mounting adapters or checking spindle compatibility, reference the chuck’s taper and clamping range to ensure correct pairing and optimal concentricity. The SKU 4000832050NW identifies this exact configuration for ordering and inventory purposes. For reliable, high-torque clamping choose the RÖHM Prima geared drill chuck — contact Metav Werkzeuge for supply and tailored advice at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data Article number: 4000832050NW Product: Geared drill chuck Model: Prima Facts Clamping range: 1.0–16 mm Arbor: B18 Key size: S 3 Rotation: Right-hand Packaging unit: 1 Special features DIN 238 taper Impact-resistant (suitable for hammer drilling) Heavy industrial version for stationary machines Keyed operation (S3) FAQ Is this chuck suitable for production drill presses? The Prima geared drill chuck from RÖHM is built as a heavy industrial version for stationary machines and is therefore suitable for production drill presses. What clamping range does the chuck cover? The chuck covers a 1.0–16 mm clamping range, which makes it versatile for a wide range of drill shank sizes. Which arbor does the chuck require? This geared chuck mounts to a B18 arbor and includes a DIN 238 taper for stable connection to compatible spindles. How is the chuck tightened and secured? Tightening is performed with the supplied S3 key, providing secure, repeatable clamping suitable for intensive workshop use. What is the SKU for ordering this configuration? The SKU for the RÖHM Prima geared drill chuck in this configuration is 4000832050NW. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm Universal Jaws With Prism Stop For Round Parts, Precision 0.01mm - Vertex
Combining a prism stop for round components, tight 0.01 mm accuracy and compact dimensions, this jaw set ensures reliable support for both measuring and light clamping tasks in production environments. Order the Universal Caliper Jaws VWSJ-6 directly via Metav Werkzeuge or ask our consultants if needed. Universal Caliper Jaws VWSJ-6 — Prism stop for round components The Universal Caliper Jaws VWSJ-6 are a compact measuring accessory for calipers, designed to provide stable support and precise contact points when measuring round and irregular workpieces. Prism stop for round components Fits calipers with 150–160 mm jaw width High repeatability with 0.01 mm accuracy Compact dimensions 190 x 40 x 53 mm Accurate support that improves measurement reliability The jaw set delivers consistent precision across repetitive checks thanks to a stated 0.01 mm accuracy, which reduces measurement scatter and supports traceable inspection routines. The integrated prism stop is shaped to cradle cylindrical parts, converting a potentially unstable contact into a well-defined seating point; this reduces alignment errors when comparing diameters or checking concentricity. By stabilising round samples, the accessory elevates routine caliper measurements to a repeatable quality check without complex fixturing. Seamless integration with existing calipers and workflows Designed for compatibility with calipers that accept jaw widths of 150–160 mm, the accessory installs quickly and keeps the measuring chain short. The modest footprint and clear mounting geometry preserve operator sightlines and machine clearance, allowing straightforward alternation between standard jaws and the universal set. This compatibility minimises downtime and simplifies inspection plans in small-batch production or maintenance shops, supporting efficient throughput and predictable cycle times. Practical handling and workshop resilience With compact dimensions and a manageable mass, the jaw set is easy to fit, reposition and store, which helps maintain an orderly workstation. The universal configuration with an integrated stop makes the unit suitable for mixed production tasks where quick changeovers are required. Robust construction principles ensure stable contact under typical workshop handling; the accessory therefore supports faster decision-making on shop floors and contributes to a steady quality flow in assemblies and incoming inspection processes. For reliable, repeatable caliper measuring with a dedicated prism stop, request product details and fitment advice for the VWSJ-6 from Metav Werkzeuge in Emmerich or consult our specialists for compatibility checks Technical data Article number: VWSJ-6 GTIN: 4061905093203 eClass: 21029107 Manufacturer: Vertex Facts Dimensions: 190 x 40 x 53 mm Weight: 2 kg Accuracy: 0.01 mm Fits caliper jaw width: 150–160 mm Special features Prism stop for round pieces Universal jaws with stop Designed for measuring and light clamping applications FAQ Which caliper jaw widths are compatible with these jaws? The jaws are specified to fit calipers with a jaw width of 150–160 mm; the VWSJ-6 set is engineered for that mounting range. How precise are the measurements when using this attachment? Repeatability and contact definition are supported by a declared accuracy of 0.01 mm when the Universal Caliper Jaws VWSJ-6 are used under stable measurement conditions. Can the prism stop hold small round bars securely for comparison checks? Yes, the integrated prism stop provides a V-shaped seating surface that stabilises cylindrical samples for comparative diameter and concentricity checks. Is this jaw set suitable for workshop inspection and light clamping tasks? The unit is intended for measuring support and light clamping in workshop inspection routines; it is not a substitute for heavy-duty vises or production clamps. What identifies this product for ordering or inventory? Reference the SKU VWSJ-6 and GTIN 4061905093203 when ordering or checking stock levels. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
150mm Universal Jaws With Soft Stop For Irregular Parts, 0.01mm Accuracy - Vertex
Reliable measurement extension and gentle clamping result from the soft stop and high 0.01 mm accuracy, combined with compatibility for jaw widths 150–160 mm, improving repeatability on workshops and inspection benches. Order the Universal Jaws with Stop (VWSJ-R160) directly via (Metav Werkzeuge) or ask our consultants if needed. Vertex VWSJ-R160 Universal Jaws with Stop — Soft stop and 0.01 mm accuracy A Universal Jaws with Stop (VWSJ-R160) accessory that extends the measuring range of a precision caliper while protecting irregular workpieces with a cushioned contact. Soft stop for irregular workpieces Fits calipers with 150–160 mm jaw width Precision to 0.01 mm Compact size 190 x 40 x 54 mm Increase measurement capacity without compromising precision Fitting a set of specialised jaw attachments to an existing precision caliper allows measurements of non-standard or larger components without buying a new instrument. The attachment provides a defined contact surface and maintains the declared 0.01 mm accuracy, so measurement results remain comparable with previous readings. For workshops that perform batch inspections, this reduces cycle time by avoiding instrument changeovers, while maintaining the traceable, numerical basis required for quality control. Secure handling of uneven and delicate parts The integrated soft stop cushions contact with irregular workpieces, preventing surface damage and helping to achieve consistent contact conditions. In practice this means fewer rejections caused by measurement artefacts and improved repeatability when dealing with thin, brittle or variably shaped components. The cushioned contact also stabilises the part during the reading process, which contributes to more reliable statistical process control and less rework on subsequent production stages. Practical, compact design for workshop use With compact dimensions 190 x 40 x 54 mm, the accessory stores easily and fits into standard tool kits. Compatibility with calipers that accept a jaw width 150–160 mm keeps the solution flexible across commonly used instruments. The unit is supplied under the Vertex designation VWSJ-R160, which simplifies ordering and inventory tracking for procurement teams and metrology departments. Installation requires no special tools and can be carried out at the inspection bench, enabling a fast changeover between standard and extended measuring configurations. For gentle, repeatable measurement of irregular workpieces, contact Metav Werkzeuge in Emmerich to discuss the Vertex VWSJ-R160 and place an order — email info@metav-werkzeuge.com or call +49 2822 7131930, WhatsApp +49 170 2837271 Technical Data SKU: VWSJ-R160 GTIN: 4061905091001 ECLASS: 21029107 Brand: Vertex Facts Accuracy: 0.01 mm Compatible jaw width: 150–160 mm Dimensions: 190 x 40 x 54 mm Special features Soft stop for irregular workpieces Designed for use with precision calipers Compact format for easy storage FAQ How does the soft stop protect workpieces during measurement? The soft stop cushions contact between the jaw and the component, reducing localised pressure and thus lowering the risk of surface damage when using the Universal Jaws with Stop (VWSJ-R160) on delicate or uneven parts. Which calipers are compatible with these jaws? Compatibility is for calipers with a jaw width of 150–160 mm; the VWSJ-R160 was designed to fit this range and extend the measuring capability of standard precision calipers. Can the VWSJ-R160 maintain the stated accuracy of 0.01 mm? Yes, when used with a correctly calibrated precision caliper and under consistent measuring conditions, the VWSJ-R160 supports measurements with an accuracy of 0.01 mm. Is installation reversible without altering the caliper? The jaw attachment is intended for quick fitting and removal so normal caliper function is retained; no permanent modification to the caliper is required. What ordering reference should be provided to procurement? Please use the SKU VWSJ-R160 and GTIN 4061905091001 when placing orders or requesting quotes for this Vertex accessory. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
150mm Vertical Clamp Holding Arm 6000N, 2000N Clamping Force - Kukamet
Benefit from the combination of a 6,000 N holding arm, a 2,000 N maximum clamping force and a compact horizontal-foot mount for secure, space-saving workholding; order directly via Metav Werkzeuge or consult the team for integration advice. Kukamet 221 Vertical Clamp – 6,000 N holding arm, horizontal-foot mount A Kukamet 221 vertical clamp engineered for repeatable, high-force fixtures where robust holding and compact installation are essential High 6,000 N holding force Max clamping force 2,000 N Horizontal-foot mounting design Blackened finish for workshop durability Robust 2.14 kg construction Secure, high-force clamping for repeatable setups The vertical clamp delivers a dependable combination of holding arm strength and controlled clamping force: the arm provides up to 6,000 N of holding capacity while the mechanism exerts a peak 2,000 N clamping force. This distinction means fixtures remain immobile under machining loads while the applied clamp pressure protects components from deformation. For production lines and jigs where repeatability is critical, that separation between holding and clamping performance reduces setup time and lowers scrap rates. The result is a measurable improvement in process consistency and throughput. Space-efficient mounting that adapts to tight fixtures Designed with a horizontal-foot mounting arrangement, the clamp fits into low-profile and constrained fixtures without obstructing tool paths. The mounting concept simplifies retrofitting to existing plates and pallets and enables closer part-to-tool clearances, which can be decisive in compact machining centres or assembly jigs. Because the unit occupies minimal vertical space, designers can prioritise accessibility and tool clearance while still benefiting from a high-holding capability that maintains component stability during machining or testing. Durable finish and solid build for everyday workshop use Constructed with a blackened finish, the clamp is protected against mild corrosion and surface wear while minimising glare at the workbench. The solid mass—approximately 2.14 kg—provides a reassuring feeling of robustness and reduces transmitted vibration at the contact points, which supports more accurate machining and longer service life. The surface treatment and construction together mean lower maintenance intervals and fewer replacements, supporting a more predictable total cost of ownership in busy shop environments. Predictable integration and straightforward operation With a lever-style actuation familiar to shop personnel, the clamp integrates quickly into standard tooling concepts and fixture plates. Its mechanical simplicity ensures predictable behaviour under load and makes inspection and routine checks straightforward. Documentation supplied with the unit enables correct torque and mounting specifications to be applied, helping to avoid misalignment and premature wear. For technical queries or bespoke fixture adaptations, Metav Werkzeuge’s consultative support is available to assist with selection and fitment. Contact Metav Werkzeuge today for tailored advice on integrating the Kukamet 221 vertical clamp into the fixture system and secure reliable, high-force workholding for production or prototyping. Technical Data Article number: 221-6-C GTIN: 8682843520420 ETIM: EC011973 Facts Weight: 2.14 kg Max clamping force: 2,000 N Max holding force: 6,000 N Angle: 120° Special features Material: blackened finish Mounting: horizontal-foot Category: clamp Manufacturer: Kukamet FAQ What are the maximum clamping and holding forces? The Kukamet 221 vertical clamp (SKU 221-6-C) provides a maximum clamping force of 2,000 N and a holding-arm capacity of 6,000 N. How is the clamp mounted to a fixture plate? The unit uses a horizontal-foot mounting arrangement designed for low-profile attachment to fixture plates and pallets. Is the finish suitable for workshop environments? The clamp’s blackened finish offers enhanced surface protection and reduced glare, making the device well suited to standard workshop conditions. Will the clamp fit into compact or tight fixtures? Yes; the horizontal-foot design and compact profile are intended for installations where vertical space is limited. Who to contact for technical integration or special requirements? For assistance integrating the Kukamet 221 vertical clamp into a specific fixture or application, contact Metav Werkzeuge for expert guidance. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
150mm Vertical Clamp M12x80 Press Spindle 4,500 N Clamping Force, 5,000 N Holding Force - Kukamet
Take advantage of a compact, galvanised vertical clamp that combines a robust M12x80 pressure spindle with a high holding force for reliable fixture security. With a maximum holding capacity of 5,000 N and a clamping force of 4,500 N, the design supports stable vertical-foot installation; order directly via Metav Werkzeuge or consult their specialists for application matching. Kukamet Vertical Clamp 212 — galvanised vertical clamp with M12x80 spindle The Kukamet Vertical Clamp 212 is a compact vertical clamping device engineered for secure workpiece retention in workshop fixtures and light industrial jigs. Galvanised finish for corrosion resistance M12x80 pressure spindle for robust clamping Vertical-foot mounting for stable installation Max holding force 5,000 N, clamping force 4,500 N Consistent clamping performance for production demands Built around a precision M12x80 pressure spindle, this vertical clamping device delivers repeatable clamping force and consistent engagement under cycle use. The specified maximum holding force of 5,000 N and clamping force of 4,500 N give a verifiable performance envelope for fixture design and load calculations. Engineers and workshop planners can therefore integrate this clamp into predictable assemblies where known force values are required to secure workpieces during machining, inspection or assembly operations. Compact installation that saves fixture space With a vertical-foot mounting, the clamp preserves table and fixture real estate while offering a secure anchor point for vertical clamping tasks. The vertical-foot mounting reduces lateral footprint and simplifies alignment in jigs and modular fixtures. At approximately 1.54 kg, the unit contributes little mass to the setup, easing handling and positioning during assembly without compromising stability. The compact footprint supports denser fixture layouts and faster changeovers in small-batch production. Galvanised finish and low-maintenance operation A galvanised finish provides effective surface protection against corrosion in workshop environments, reducing the need for frequent upkeep and extending service life. The straightforward mechanical design minimises parts subject to wear, which translates into low maintenance and predictable downtimes. For maintenance teams, routine checks of the spindle thread and clamping surfaces are typically sufficient; spare-part complexity is minimal, which keeps workshop logistics simple and cost-effective. Suitable uses and safe handling recommendations This vertical clamp is particularly suitable for light to medium-duty clamping tasks in general workshop use, fixture-making and assembly stations. When specifying the clamp in a fixture, allow for the stated maximum forces (5,000 N holding, 4,500 N clamping) and ensure that mating components and fastenings meet those loads. Correct tightening of the M12x80 pressure spindle and secure fastening of the vertical foot are essential for safe operation. Where dynamic or impact loads are expected, verify application parameters against the clamp’s rated values before commissioning. For tailored advice on integrating the Kukamet Vertical Clamp 212 (SKU 212-5) into specific fixtures or for technical matching, contact Metav Werkzeuge — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss requirements and availability. Technical Data SKU: 212-5 GTIN: 8680731501766 ETIM: EC011973 ECLASS: 21041717 Material: galvanised Weight: 1.54 kg Facts Max holding force: 5,000 N Max clamping force: 4,500 N Pressure spindle: M12x80 Weight: 1.54 kg Special features Vertical clamp design Vertical-foot mounting Galvanised finish No special additional features FAQ What is the maximum holding capacity of this clamp? The Kukamet Vertical Clamp 212 provides a maximum holding force of 5,000 N and a clamping force up to 4,500 N, values suitable for many workshop fixture applications. Is the clamp suitable for corrosive workshop environments? The unit features a galvanised finish, which offers good corrosion resistance and reduces maintenance frequency in typical workshop conditions. How is the clamp mounted to a fixture? Mounting is achieved via a vertical-foot mounting, designed for stable fastening to fixture plates or machine tables and straightforward alignment in vertical clamping setups. Which spindle specification does the clamp use? The clamp uses an M12x80 pressure spindle, providing robust thread engagement and straightforward replacement if needed. Can the clamp be used in light industrial jigs and assembly stations? Yes, the clamp is intended for workshop and light industrial fixtures where its compact footprint and rated forces meet the application requirements; verify loads against the stated maximum holding and clamping forces. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
150mm Vertical Clamp Three-Point, Solid Holding Arm & Safety Lock, 3,000 N Thrust - Kukamet
Take advantage of the combination of 3,000 N clamping force, a galvanised finish and a compact horizontal base to secure repeatable fixtures with minimal downtime; order the clamp directly via Metav Werkzeuge or ask our consultants for application advice. Vertikalspanner 211 — Kukamet vertical toggle clamp with 3,000 N clamping force Vertikalspanner 211 is a vertical toggle clamp designed for secure part holding in workshop fixtures and production jigs, combining a robust holding arm with an integrated safety locking mechanism. Robust holding arm with safety lock Galvanised finish resists corrosion 3,000 N clamping force, 3,300 N hold Horizontal base for stable mounting Consistent clamping performance for production use The vertical toggle clamp delivers defined force values that support repeatable workholding: a 3,000 N clamping force with a 3,300 N holding force ensures components remain immobilised during machining, assembly or testing. These numeric values indicate the clamp’s capability to withstand dynamic loads and vibration; for users unfamiliar with the terms, clamping force refers to the pressing force applied when the lever is engaged, while holding force is the resistance to pull-out when loaded. The measured forces make this clamp suitable for standard industrial fixtures where predictable restraint is required, reducing rework and inspection time. Built for resilience and safe operation Constructed with a galvanised finish, the device resists surface corrosion in workshop environments, extending service life and lowering maintenance intervals. The design incorporates a robust holding arm and a safety locking mechanism that prevents accidental release during operation. The lock increases operator safety and process reliability by ensuring the toggle remains engaged under intermittent loads. Where safety documentation is required for work instructions, the mechanical lock provides a clear, verifiable safeguard compared with non-locking clamps. Compact mounting and straightforward integration A horizontal base allows stable attachment to benches, fixture plates or tooling stations while the 150 mm arm provides reach without excessive overhang. At approximately 0.89 kg the clamp is lightweight yet rigid, which simplifies placement in modular jigs and reduces strain on mounting hardware. The compact footprint supports dense fixture layouts and enables faster changeovers in small-batch production. Where adaptation is necessary, the clamp’s standard dimensions and mounting style make it compatible with common workshop practices and retrofit applications. For tailored fixture recommendations or to specify the Kukamet 211 vertical toggle clamp for a particular production task, contact Metav Werkzeuge in Emmerich via info@metav-werkzeuge.com or call +49 2822 7131930 for prompt consultation. Technical Data Article number: 211-4-D-L-C2 GTIN: 8680731501353 Brand: Kukamet Facts Clamping force: 3,000 N Holding force: 3,300 N Arm length: 150 mm Weight: 0.89 kg eClass: 21041717 ETIM: EC011973 Special features Galvanised finish Horizontal base mounting Massive holding arm Safety locking mechanism Category: Clamps FAQ What maximum clamping force does the Vertikalspanner 211 provide? The Vertikalspanner 211 provides a maximum clamping force of 3,000 N and a holding force of 3,300 N suitable for many fixturing tasks. Can the clamp be mounted on a fixture plate or bench? Yes, the clamp features a horizontal base that enables stable mounting to fixture plates, benches or tooling stations for repeatable positioning. Is the finish suitable for humid workshop environments? The galvanised finish offers corrosion resistance for general workshop conditions, increasing the service life of the clamp. What benefit does the safety locking mechanism offer? The safety lock prevents accidental opening under load, improving operator safety and ensuring consistent process reliability during machining or assembly. Is the Vertikalspanner 211 suitable for compact jig layouts? With a 150 mm arm and a compact footprint at around 0.89 kg, the clamp is well suited to dense fixture arrangements and modular jigs. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
150mm Vertical Clamp With Horizontal Base M12 x 110 Pressure Screw 3,400N Holding Force 5,500N - AMF
Benefit from a dependable combination of 5,500 N holding force, an adjustable clamping range of −2.5 to 55 mm, and a horizontal base designed for flexible mounting — ideal for secure workholding in production. Order the clamping unit directly via Metav Werkzeuge or contact our consultants for tailored integration advice. Vertical clamp No. 6800, size 6 (AMF) – vertical clamping unit with horizontal base and high holding force The Vertical clamp No. 6800, size 6 (AMF) is a vertical clamping unit for secure workholding in machining and assembly that features a horizontal base for flexible mounting and a mainspring-adjustable clamping screw for consistent contact. High holding force 5,500 N Max clamping force 3,400 N Horizontal base for flexible mounting Clamping range -2.5 to 55 mm Reliable clamping where precision matters The 6800-series vertical clamp delivers measurable security through a holding force of 5,500 N and a maximum clamping force of 3,400 N, which reduces movement during machining and minimises rework. The force specifications support consistent repeatability across batches, allowing process planners to rely on predictable results and integrate the clamp into quality-controlled production. Such measurable performance is particularly relevant for jigging, fixture work and assembly operations where precision and minimal part shift are essential. Adaptable mounting for varied set-ups A horizontal base increases the number of possible mounting orientations on machine tables and fixtures, boosting layout flexibility on the shop floor. The unit is supplied with a M12 x 110 clamping screw and offers an adjustable vertical travel, with a clamping range from −2.5 mm to 55 mm, which accommodates thin and thicker workpieces without additional shims. Because the clamp’s geometry and travel are clearly defined, engineers can plan fixture layouts and CAD models with confidence, avoiding trial-and-error during set-up. Built to streamline workshop processes Designed as size 6 in the 6800 range, the clamping unit balances compact footprint with robust capability, helping to save space on multi-station fixtures and enabling denser part placement. The solid force figures translate into fewer machine interruptions and shorter clamping cycles, improving throughput. Integration into existing tooling systems is straightforward thanks to the horizontal-foot configuration and standardised screw thread, which support quick retrofit and reduced downtime. Clear specifications for planning and procurement All relevant dimensions and mechanical limits are documented for fast incorporation into technical drawings and purchasing lists: defined travel, pin positions and angle values allow technicians to compare options objectively and select the right clamp for the task. The combination of a high holding force, a wide clamping range, and compact design simplifies decision-making when upgrading jigs or specifying new fixtures, delivering tangible production benefits such as reduced set-up time and improved process reliability. Contact Metav Werkzeuge for expert advice on integrating the AMF vertical clamp No. 6800 into production and to request additional technical documentation or CAD files — email info@metav-werkzeuge.com or call +49 2822 7131930 for dedicated support Technical data Article number: 4000604350NW Type: 6800 Label: Senkrechtspanner Nr.6800 Gr.6 waagrechter Fuß AMF Execution: with horizontal base Brand: AMF Packaging unit: 1 Facts Max. clamping force: 3,400 N Max. holding force: 5,500 N Clamping screw: M12 x 110 A [mm]: 14 B [mm]: 165.5 C [mm]: 50.5 D [mm]: 13 E [mm]: 89 F [mm]: 28 H [mm]: 81 H1 [mm]: 333 HW min. [mm]: -2.5 HW max. [mm]: 55 I [mm]: 30 K [mm]: 24.5 L1 [mm]: 231 L2 [mm]: 206 M [mm]: 67.5-72.5 N [mm]: 100 P [mm]: 90 a [°]: 140 Special features Size: 6 Horizontal base Clamping range (HW): −2.5 mm to 55 mm Angle a: 140° Adjustable M dimension: 67.5–72.5 mm Includes standard M12 clamping screw FAQ What is the maximum holding force of this clamp? The clamp offers a maximum holding force of 5,500 N, providing secure retention for demanding machining and assembly tasks. Which clamping travel does the unit support? The vertical travel covers a clamping range from −2.5 mm to 55 mm, allowing workholding of both thin and relatively thick components. Is the product compatible with standard fixture threads? Yes, the unit is supplied with an M12 x 110 clamping screw and is intended for integration with standard fixture layouts. How is the item identified for ordering and documentation? Refer to the article number 4000604350NW and the type 6800 when ordering or requesting CAD data. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm Vertical Clamp With Horizontal Base, Massive Holding Arm & Safety Lock, 3,300 N Hold - Kukamet
Take advantage of the combination of 3,000 N clamping capacity, a 150 mm arm and a robust safety lock for secure and repeatable fixture clamping; order the Vertikalspanner 211 directly via Metav Werkzeuge or ask our consultants if needed. Vertikalspanner 211 – Vertical toggle clamp with 150 mm arm and 3,000 N clamping force The Vertikalspanner 211 is a vertical toggle clamp engineered for secure workpiece retention in jigs, fixtures and assembly operations across industrial and workshop environments Vertical toggle clamp with 150 mm arm 3,000 N maximum clamping force Robust arm with safety lock Horizontal foot for secure mounting Boosted throughput with consistent clamping force The vertical toggle design delivers a highly repeatable clamping action, making it a suitable choice where cycle-to-cycle consistency matters. With a rated 3,000 N clamping force and a 3,300 N maximum holding force, the device reduces rework caused by shifting workpieces and supports streamlined production sequences. The 150 mm reach of the arm allows confident access to a range of component sizes while the toggle mechanism enables fast engagement and release, transferring manual handling time into productive machining or assembly time. Secure fixturing and user-safe operation Designed for demanding use, the clamp features a massive holding arm and a positive safety lock to prevent accidental release under load. The horizontal foot mounting provides a stable base for bolting into jigs or fixture plates, ensuring the clamp remains aligned even under repeated stress. At 0.89 kg, the unit combines solidity with manageable mass for straightforward installation and replacement in modular tooling systems, supporting both repeatability and operator safety. Durable finish and workshop compatibility The device is supplied with a blackened finish, offering surface protection that helps resist corrosion in workshop conditions and reduces reflective glare during inspection or welding tasks. Its construction makes it compatible with standard jig and fixture layouts found in metalworking and fabrication shops; the clamp is particularly well suited to holding components during drilling, light milling, brazing and assembly processes. The sturdy design minimises maintenance intervals, delivering longer service life in busy production cells. Simple integration and dependable supply chain Mounting and alignment are accomplished with common fastenings and the horizontal base configuration, so the clamp integrates quickly into existing tooling plates. Technical data and SKU references allow rapid replacement planning: see the item code for procurement and inventory control. For buyers seeking supply reliability, Metav Werkzeuge provides central European distribution from Emmerich and a broad catalogue that simplifies workshop sourcing while maintaining consistent quality standards. Contact Metav Werkzeuge for tailored fixture advice and swift supply from Emmerich — quote SKU B211-4-D-L-C2 or email info@metav-werkzeuge.com / call +49 2822 7131930 for a personalised consultation Technical Data Article number: B211-4-D-L-C2 Manufacturer: Kukamet Material/finish: blackened finish Facts Maximum clamping force: 3,000 N Maximum holding force: 3,300 N Arm length: 150 mm Weight: 0.89 kg Special features Massive holding arm Safety lock Horizontal foot mounting Toggle clamp design Suitable for jigs and fixtures FAQ What is the maximum clamping force of this clamp? The maximum clamping force for the Vertikalspanner 211 is 3,000 N, with a holding force rated at 3,300 N. How is the clamp mounted to a fixture? Mounting is via the horizontal foot; the clamp is intended to be bolted to jig plates or fixture bases for secure positioning. Which materials is the clamp suitable for holding? The clamp is designed for general workshop use and is commonly employed in metalworking jigs, assembly fixtures and light machining applications. Does the clamp include a safety mechanism to prevent accidental release? Yes, the unit is fitted with a safety lock and a robust holding arm to reduce the risk of unintentional opening under load. What is the item code for ordering or stock control? The SKU for ordering is B211-4-D-L-C2 and should be quoted for procurement and inventory purposes. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
150mm Vertical Clamp With Horizontal Base, Massive Holding Arm, 3.3kN Clamping Force - Kukamet
Take advantage of the 150 mm arm, high holding capacity and galvanised durability to secure repeatable vertical clamping in production and assembly tasks. Order the Vertical lever clamp 211 directly via Metav Werkzeuge or ask our consultants if needed. Vertical lever clamp 211 — vertical clamp with 150 mm arm and galvanised finish (Kukamet) A Vertical lever clamp 211 engineered for secure vertical clamping with a horizontal base, offering a robust holding arm for demanding workshop applications Massive holding arm for stable work 3,300 N maximum holding force 150 mm arm reach for deep clamping Galvanised finish resists corrosion Consistent clamping performance that speeds up workflows The clamp delivers reliable vertical clamping through a combination of measured holding forces and a long reach. The specified 3,300 N holding force and a maximum actuation pressure of 3,000 N ensure components remain fixed during machining, assembly or inspection. This consistency reduces rework and downtime, supporting predictable cycle times on production lines. The design translates machine data into an operational advantage by stabilising parts without complex fixtures. Built for endurance in workshop environments Constructed with a galvanised finish and a robust holding arm, this clamp resists corrosion and mechanical wear common in busy shops. The corrosion protection extends service intervals and maintains accurate clamp geometry, which in turn preserves repeatability. At a weight of 0.864 kg the component is compact yet solid, allowing installation where space is limited while still offering durable performance for everyday use in fabrication and assembly cells. Easy integration into standard fixtures and jigs The clamp's horizontal base mounting enables straightforward integration onto plates, stands and modular fixturing systems. With a 150 mm arm reach, the unit can access recessed workpieces or clear tooling envelopes without additional adapter parts. The simple lever action is compatible with manual and semi-automated setups, making it suitable for small batch production and larger assembly stations alike. Clear mechanical function means predictable behaviour even for operators with limited specialist training. Practical benefits for procurement and maintenance The compact construction and familiar lever mechanism reduce the need for specialist spares and simplify maintenance routines. The galvanised surface and sturdy arm cut the frequency of replacements and lower lifetime operating costs. Supplied as a single SKU, the clamp supports efficient stock management and quick replenishment through established supply channels, aiding purchasing strategies that favour reliability and low administrative overhead. Choose the Kukamet 211 for dependable vertical clamping and contact Metav Werkzeuge for tailored advice and prompt supply Technical data SKU: 211-4-D-C2 GTIN: 8680731501322 Manufacturer: Kukamet Core specifications Arm length: 150 mm Weight: 0.864 kg Maximum holding force: 3,300 N Maximum actuation pressure: 3,000 N ECLASS: 21041717 ETIM: EC011973 Materials & features Material: galvanised Mounting: horizontal base Massive holding arm Lever clamp design for vertical clamping FAQ What is the maximum holding force of this clamp? The clamp provides a maximum holding force of 3,300 N as specified for the Vertical lever clamp 211 from Kukamet. Which mounting option is required for installation? This unit is designed for a horizontal base mounting; the horizontal base makes it suitable for fixture plates and jigs. What is the arm reach and where does it help most? The arm reach is 150 mm, which is beneficial for accessing recessed parts or clamping over fixtures without additional adapters. Is the clamp suitable for harsh workshop conditions? Yes, the galvanised finish and robust holding arm increase resistance to corrosion and wear, extending service life in workshop environments. Which SKU should be ordered for this model? Order SKU 211-4-D-C2 for the Vertical lever clamp 211 by Kukamet. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
150mm Vertical Clamp With Horizontal Foot Size 4, Max Thrust 1,700N - AMF
Take advantage of the compact footprint, robust horizontal base and clear force ratings to ensure stable, repeatable workholding. With a size 4 design and an M8 x 65 clamping screw, this vertical clamp delivers reliable clamping and secure holding force for fixtures and jigs — order directly via Metav Werkzeuge or consult the team for application advice. Vertical clamp No. 6800 — vertical clamping unit with horizontal foot by AMF The Vertical clamp No. 6800 is a compact vertical clamping device with a horizontal base, designed for secure workholding in fixtures and assembly jigs across light to medium industrial applications. Size 4 vertical clamp for compact fixtures Horizontal foot for stable mounting Holding force 3,000 N for secure workholding Stable clamping that improves process reliability The clamp offers a clearly specified clamping force of 1,700 N and a holding force of 3,000 N, which translates directly into dependable part security during machining, assembly and quality checks. The specified forces enable planners to calculate safety margins and fixture layouts without guesswork, improving throughput and reducing rework. The horizontal foot reduces the required mounting space and provides a low centre of gravity, making the unit suitable where rigidity and a small footprint are priorities. Technical planners will appreciate the M8 x 65 clamping screw, which is industry-standard and simplifies replacement and integration. Precise dimensions for predictable integration Key dimensions are provided for straightforward CAD integration and fixture design: A 10 mm, B 101 mm, C 32 mm, H1 221 mm and an adjustable stroke range HW -6 mm to 22.5 mm. These measures support accurate clash checks and modular fixture planning, while the size 4 classification helps in selecting matched components across a clamping system. The angular orientation at 105° and the compact lateral dimensions contribute to flexible positioning options in constrained tooling spaces. Clear dimension data reduces engineering iterations and accelerates time to first part. Robust build for industrial use and easy maintenance Constructed for everyday workshop and production use, the unit combines a robust base with straightforward mechanical actuation. The mechanical design emphasises repeatability and low-maintenance operation: simple mechanical interfaces and a standard clamping screw minimise downtime for servicing. Where regular inspection is required, the accessible geometry and common fastener sizes make routine checks and part replacement efficient. The component’s specification supports consistent performance under cyclic loading, ensuring longevity and stable fixture behaviour over many production cycles. Versatile application across fixtures and jigs Designed for clamping tasks in assemblies, inspection fixtures and small machining stations, this vertical clamp integrates into modular systems and bespoke jigs alike. The combination of compact footprint and strong holding force makes it suitable for securing components during drilling, light milling, assembly tasks and transfer processes. The horizontal mounting option facilitates direct attachment to base plates or subplates and simplifies alignment in stacked or multi-level fixture assemblies. For applications where force and space constraints must be balanced, this clamping unit offers a practical, engineering-led solution. Discuss mounting options and order the AMF vertical clamp No. 6800 via Metav Werkzeuge for reliable fixture performance — specialists are available to advise on integration and compatibility Technical data Article number: 4000833504NW Type: 6800 Manufacturer: AMF Product: Vertical clamp Execution: with horizontal foot Facts Max clamping force: 1,700 N Max holding force: 3,000 N Size: 4 A: 10 mm B: 101 mm C: 32 mm D: 8.6 mm E: 54 mm F: 16 mm H: 42.5 mm H1: 221 mm HW min.: -6 mm HW max.: 22.5 mm I: 20 mm K: 13 mm L1: 141 mm L2: 130 mm M: 43.5–46.5 mm N: 64 mm P: 53 mm a: 105° Special features With horizontal foot Clamping screw M8 x 65 Packaging unit: 1 FAQ What is the maximum holding force of this clamp? The maximum holding force is 3,000 N for the Vertical clamp No. 6800, providing secure retention for typical fixture applications. Can the stroke be adjusted for different part heights? Yes, the clamp offers an adjustable stroke range (HW) from -6 mm to 22.5 mm to accommodate varying component heights. Is the clamping screw a standard size for easy replacement? The unit uses an M8 x 65 clamping screw, a common size that simplifies maintenance and spare-part sourcing for the AMF vertical clamp No. 6800. Which applications suit this vertical clamp? The clamp is suitable for jigs, fixtures and light machining or assembly tasks where a compact vertical clamping solution with a horizontal mounting base is required. Are full dimensions available for CAD integration? Yes, detailed dimensions including A, B, C, H1 and others are provided for seamless CAD integration and fixture planning. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm Vertical Clamp with Horizontal Foot, Max Clamp Force 600 N, Retaining Force 1100 N - AMF
Take advantage of the compact Size 1 format and the combination of a horizontal foot with proven holding and clamping forces (up to 1,100 N holding and 600 N clamping) for secure fixture tasks. Order supply or request specification advice directly via Metav Werkzeuge for a reliable workshop solution. AMF Vertical Clamp No. 6800 — vertical clamp with horizontal foot, Size 1 AMF Vertical Clamp No. 6800 provides robust vertical clamping with a horizontal mounting option for fixtures and jigs in production and assembly environments. Horizontal foot for flexible mounting Clamping force up to 600 N Holding force up to 1,100 N Compact Size 1 for tight fixtures Consistent clamping and measurable performance The device delivers a clamping force of 600 N and a holding force of 1,100 N, values that translate directly into dependable part retention during machining, assembly or inspection operations. Specified forces are particularly useful where repeatable clamping performance is required; the difference between clamping and holding figures helps to understand dynamic versus static load capacities. The integrated M5 x 30 pressure screw enables fine adjustment of contact force, allowing precise set-up on fixtures where controlled pressure is critical for part integrity. Flexible mounting and clear dimensional data Designed with a horizontal foot, the clamp adapts to a variety of fixture geometries without compromising accessibility above the workpiece. Key dimensions such as A = 5 mm, B = 39 mm, C = 16 mm and H1 = 98.5 mm support straightforward planning when integrating the clamp into existing tooling plates or bespoke jigs. The mechanical travel range (HW min. -4 mm / HW max. 2 mm) gives an understanding of adjustable engagement depth; this is helpful when compensating for part tolerances or surface irregularities in assembly processes. Suited to industrial use and straightforward handling The compact construction of the clamp (Size 1) and its clear mechanical interface simplify handling during set-up and maintenance. The design focus on measurable parameters reduces uncertainty in procurement and engineering documents: fixtures benefit from a component whose capabilities are stated in Newtons and millimetres rather than vague descriptors. Where higher throughput and repeatability matter, the clamp’s specification supports process consistency and reduces rework due to insecure clamping. Integration benefits and supply confidence Choosing a standardised clamping element with defined mechanical data supports faster fixture design cycles and easier spare-part management. The clamp matches well with modular fixturing systems and can be incorporated into subassemblies where a low-profile, vertically acting clamp is required. Metav Werkzeuge supplies the component with full logistical support from Emmerich, adding supply-chain transparency and a single-source option for workshop procurement. Arrange supply of the AMF vertical clamp (Size 1, horizontal foot) via Metav Werkzeuge — contact info@metav-werkzeuge.com or call +49 2822 7131930 for specification support and delivery planning Technical data Article number: 4000833501NW Type: 6800 Manufacturer: AMF Product: Vertical clamp Execution: with horizontal foot Packaging unit: 1 Facts Clamping force max: 600 N Holding force max: 1,100 N Size: 1 A: 5 mm B: 39 mm C: 16 mm D: 4.5 mm E: 18 mm F: 6 mm H: 19 mm H1: 98.5 mm HW min.: -4 mm HW max.: 2 mm I: 10 mm K: 5.5 mm L1: 61 mm L2: 59 mm M: 22.5–26 mm N: 34 mm P: 27 mm a: 95° Special features Pressure screw M5 x 30 Compact Size 1 form factor Horizontal-foot mounting for fixture versatility Clear Newton- and millimetre-based specifications FAQ What maximum clamping and holding forces does this clamp provide? The clamp offers a clamping force of up to 600 N and a holding force of up to 1,100 N, values suitable for many light- to medium-duty fixturing tasks. Is the horizontal foot suitable for use on existing fixture plates? Yes, the horizontal foot design allows straightforward attachment to common fixture plates and modular fixturing systems, facilitating integration into existing tooling. Which adjustment screw is used for contact pressure? The unit uses an M5 x 30 pressure screw for setting and fine-tuning the contact pressure. What travel range is available for adjustment at the clamping interface? The adjustable engagement range is indicated as HW min. -4 mm to HW max. 2 mm, allowing compensation for part height variations. Is the clamp suitable for automated assembly processes? The compact dimensions and defined force ratings make the clamp appropriate for many automated and semi-automated setups where vertical clamping is required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm Vertical Clamp With Massive Holding Arm, 3,300 N Holding Force, Blackened - Kukamet
Take advantage of the combination of robust clamping force, a solid holding arm and compact design to increase fixture reliability and reduce setup times; order the clamp directly via Metav Werkzeuge or consult our specialists for application advice. Vertikalspanner 212 — Vertical clamp with 150 mm arm and 3,000 N clamping force by Kukamet The Vertikalspanner 212 is a vertical lever clamp designed for secure workholding in jigs, fixtures and general machining applications. Massive holding arm for extra rigidity 150 mm solid holding arm 3,000 N clamping force Vertical-foot mounting for upright fitting Consistent clamping performance that improves throughput The robust construction delivers dependable, repeatable clamping: a maximum pressing force of 3,000 N combined with a maximum holding force of 3,300 N reduces part movement during machining and assembly. This reliability lowers the risk of rework and supports higher process stability. The compact mass and precise kinematics enable fast actuation, helping to shorten cycle times while maintaining steady contact pressure for repeatable results. Space-saving design and straightforward fixture integration With a 150 mm holding arm and a vertical-foot mounting arrangement, the unit is intended for upright installation on plates and tooling blocks where space is limited. The solid holding arm resists bending and vibration, providing a stable clamp point for workpieces. The blackened finish offers a non-reflective surface that can aid orientation in production environments. Together, these attributes support easy retrofitting into existing jigs and custom fixtures without extensive redesign. Durable construction for workshop conditions and simple upkeep Engineered for repetitive use, the clamp combines a sturdy build with a lightweight profile of 0.87 kg, making it resilient yet convenient to handle during assembly and maintenance. The lever-based operation is familiar to workshop personnel and minimises training time. Basic upkeep—periodic inspection of pivot points and lubrication—ensures long service life and consistent performance, supporting predictable maintenance intervals in production schedules. Contact Metav Werkzeuge for technical matching of Kukamet clamps to specific fixtures or to request detailed supply information from Emmerich; our advisers will support selection and delivery planning Technical data Article number: B212-4-D-C2 GTIN: 8682843522349 Manufacturer: Kukamet ECLASS: 21041717 ETIM: EC011973 Facts Arm: 150 mm Maximum pressing force: 3,000 N Maximum holding force: 3,300 N Weight: 0.87 kg Special features Solid holding arm Mounting: vertical foot Finish: blackened Operation: lever clamp FAQ What clamping and holding forces does this clamp provide? The Vertikalspanner 212 offers a maximum pressing force of 3,000 N and a maximum holding force of 3,300 N, suitable for stable workholding in many jigs and fixtures. How is the clamp mounted in a fixture? Mounting is by a vertical foot; the clamp is designed for upright installation on plates or tooling blocks, allowing simple integration into existing fixtures. What is the length of the holding arm and why does it matter? The holding arm measures 150 mm; this span balances reach with stiffness so that the solid holding arm resists deflection while accessing typical fixture positions. Is the finish suitable for workshop use? Yes. The blackened finish provides a practical, non-reflective surface that withstands handling and helps to limit visible wear in production settings. Which operation principle does the device use? The device operates as a lever clamp, offering rapid engagement and reliable mechanical clamping for repetitive tasks. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
150mm Vertical Clamp With Massive Holding Arm, 3.3kN Hold Force, Galvanised - Kukamet
Take advantage of a compact, high-force clamping solution that combines a solid 150 mm holding arm with a galvanised finish for durable workshop performance; order the item directly via Metav Werkzeuge or contact their consultants for integration advice. 212 vertical toggle clamp by Kukamet — galvanised, 150 mm arm, 3,300 N holding force The 212 vertical toggle clamp is a sturdy vertical clamping device designed for reliable workholding in jigs, fixtures and general workshop applications. Robust 150 mm solid holding arm Galvanised finish for corrosion resistance Clamping force up to 3,300 N Lightweight: 0.87 kg for easy handling Secure, high-force clamping for repeatable production Built to provide dependable clamping in repeat-use applications, this vertical toggle clamp delivers a holding force of 3,300 N and a maximum pressure force of 3,000 N, values that translate into secure fixation of components during machining, assembly or inspection. The numerical force ratings describe the mechanical load capacity: the holding force indicates resistance against pull-out, while the pressure force denotes the achievable compressive load when the lever is actuated. Those specifications help planners calculate fixture stability and safety margins, supporting predictable cycle times and fewer interruption-related losses. Corrosion protection and long-term durability A galvanised surface treatment guards the mechanism from surface corrosion encountered in workshop environments. The protective zinc layer reduces maintenance needs and helps sustain consistent clamping behaviour over time. Combined with the solid holding arm, the construction is oriented towards long service life even with frequent operation. The unit’s low mass—0.87 kg—makes it straightforward to mount and replace in modular fixtures without sacrificing robustness. Fast actuation and simple integration into fixtures The vertical toggle design uses a lever action to achieve quick engagement and disengagement, reducing setup times and enabling efficient part loading. The 150 mm arm offers reach and clearance for a wide range of workpieces while remaining compact enough for dense jig layouts. Mounting is achieved via a vertical foot, allowing the clamp to be fixed to plates or tooling boards with minimal intrusion into machining envelopes. Repeatable clamping positions and a positive toggle lock contribute to consistent part placement and reduced rework. Practical benefits for workshop and light-industrial use Engineered as a pragmatic fixture element, the device supports streamlined processes by combining lightweight handling with high clamping capacity. The compact footprint and robust lever mechanics make it suitable for manual and semi-automated operations where dependable, repeatable clamping is required. Supplied via Metav Werkzeuge’s European distribution, availability and reliable fulfilment are supported from a centralised quality filter, helping workshops maintain inventory continuity and reduce supplier complexity. For integration support or to discuss suitability of the Kukamet 212 vertical toggle clamp for specific fixtures, contact Metav Werkzeuge—technical consultants are available at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 212-4-D-C2 GTIN: 8680731506174 Manufacturer: Kukamet Facts Weight: 0.87 kg Arm length: 150 mm Holding force: 3,300 N Maximum pressure force: 3,000 N EClass: 21041717 ETIM: EC011973 Special features Material: galvanised Massive holding arm Vertical foot mounting Lever clamp design FAQ What is the main difference between holding force and pressure force? Holding force refers to the clamp’s resistance to pull-out, while pressure force denotes compressive load generated during lever actuation; both values are given for the Kukamet 212 vertical toggle clamp to aid fixture design. Can the clamp be used in light machining operations? Yes, the 212 vertical toggle clamp is suitable for light industrial and workshop machining where a 3,300 N holding capacity and a galvanised construction meet the required stability and corrosion resistance. What mounting arrangement does the clamp require? The clamp is fitted via a vertical foot mounting, designed to be secured to tooling plates or fixture boards for repeatable positioning of components. Is the galvanised finish suitable for humid environments? The galvanised surface provides enhanced protection against corrosion in typical workshop and humid conditions, extending service life and reducing maintenance intervals for the Kukamet clamp. Which SKU should be referenced when ordering or enquiring? Reference SKU 212-4-D-C2 when enquiring about the Kukamet 212 vertical toggle clamp to ensure correct identification. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
150mm Vertical Clamp With Massive Holding Arm, 3.3kN Holding Force, 3kN Thrust - Kukamet
Robust clamping performance and a 150 mm solid holding arm deliver dependable, repeatable workholding in tight workshop setups; combined with a 3,300 N maximum holding force, the design supports secure machining and assembly operations. Order the clamp directly via Metav Werkzeuge or ask our consultants if needed. Vertical Clamp 211 – Kukamet vertical toggle clamp with 150 mm solid arm The Vertical Clamp 211 is a vertical toggle clamp designed for secure bench workholding, pairing a horizontal base with a massiven holding arm for general industrial and workshop applications. 150 mm solid holding arm Horizontal base for bench mounting 3,300 N maximum holding force Blackened finish for surface protection Consistent holding for repeatable processes The clamp provides a balanced ratio of 3,000 N clamping force to a 3,300 N holding force, ensuring components remain fixed under machining loads. Clamping force refers to the active closing pressure applied by the toggle mechanism, while holding force denotes the static resistance once locked; both figures deliver objective assurance for process repeatability. This measurable performance reduces rework and supports stable quality in serial tasks, translating technical data into a clear production advantage. Secure bench mounting with a compact working envelope Engineered with a horizontal base for bench or fixture mounting and a 150 mm arm, the unit minimises footprint while giving a long reach for a variety of workpieces. The solid holding arm stabilises the clamped part and resists bending under lateral loads, simplifying fixturing layouts. For workshops where space and accessibility matter, the combination of compact mounting and a robust arm shortens setup times and keeps fixtures compact without compromising on grip. Durable finish and low-maintenance operation A blackened finish provides corrosion-resistant surface protection that supports long service life in workshop environments. The toggle mechanism is designed for straightforward operation and limited maintenance requirements, so daily use is efficient with minimal downtime. The relatively low mass of under 1 kg contributes to ease of handling during fixture changes while the sturdy construction sustains frequent engagement cycles, making the component a practical choice for continuous use. Fast action where speed meets safety The toggle-style actuation delivers rapid clamping and release, enabling quicker changeovers and higher throughput in repetitive operations. The mechanical lock inherent to the design ensures the clamped part remains secure without continuous force, adding a safety margin during secondary operations. These operational advantages convert directly into time savings and predictable work cycles in production and assembly contexts. Choose Kukamet quality for dependable holding — contact Metav Werkzeuge for procurement and technical advice at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: B211-4-D-C2 GTIN: 8680731507744 Manufacturer: Kukamet Core specifications Arm length: 150 mm Clamping force: 3,000 N Holding force: 3,300 N Weight: 0.864 kg eClass: 21041717 ETIM: EC011973 Features Mounting: horizontal base Solid holding arm (massive arm) Finish: blackened Clamp type: vertical toggle clamp Category: Clamping tools and fixtures FAQ What clamping and holding forces does this clamp provide? The Vertical Clamp 211 offers a clamping force of 3,000 N and a maximum holding force of 3,300 N, values that indicate the active closing pressure and the static resistance respectively for secure workholding. How is the clamp mounted to a workbench or fixture? Mounting is via a horizontal base designed for bench or fixture attachment, enabling stable installation of the clamp in common workshop set-ups. What is the reach of the holding arm? The holding arm measures 150 mm, giving an extended reach for a compact clamp that suits a variety of component sizes. What surface protection and durability can be expected? The unit features a blackened finish that enhances corrosion resistance and supports long service life under regular workshop conditions. Is the design suitable for repetitive industrial use? Yes, the robust construction and toggle mechanism of the Vertical Clamp 211 are intended for frequent actuation and repeatable fixturing tasks, making it suitable for industrial and workshop environments. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Secure components with reliable workpiece clamps
Workpiece clamps, also known as workholding clamps or workholding devices, form the essential mechanical interface between machine and part in industrial fabrication. They keep components absolutely play-free, positionally accurate and vibration-resistant during milling, turning, drilling or grinding.
How workpiece clamps ensure process stability
A correctly specified clamping concept transfers the high cutting and feed forces of modern CNC machines into the machine table or spindle without deforming the part. The right combination of mechanical, hydraulic, pneumatic or magnetic solutions enables fast, repeatable setups and supports automated part change where required. Typical applications range from single-part turning to high-volume series milling and complex five-axis machining.
Concrete production benefits at a glance
- repeatable positioning: reduces scrap and rework
- high clamping forces: withstands aggressive cutting without part movement
- reduced set-up time: modular systems and quick-change features speed throughput
- improved surface finish: vibration damping for finer results and tighter tolerances
- flexible compatibility: vices, chucks, clamping plates and zero-point systems for diverse geometries
Why Metav's range is the practical choice
Metav combines decades of specialist know-how with a broad, handpicked range that democratises precision for workshops and industry alike. Based in Emmerich, Metav acts as a quality filter for the European market and supplies more than 250,000 products from precision metrology to complete workshop equipment. With the trust of over 48,000 customers, Metav offers a single-source approach that reduces supplier complexity and secures dependable delivery to your workbench.
Technical data
- function: mechanical interface between machine and workpiece
- primary requirements: absolute positional accuracy; vibration reduction; high clamping forces
- technologies: mechanical, hydraulic, pneumatic, magnetic
- typical components: machine vices; chucks; clamping plates; zero-point systems; pratzen; clamping jaws
- application areas: milling; turning; drilling; grinding; automated part change systems
- production benefits: reduced set-up time; enhanced process security; optimised series and single-part production
The practical summary
Workpiece clamps bring the stability and repeatability required to meet tight tolerances and excellent surface quality, making them indispensable across machining operations. Choosing the right workholding clamps and modular workholding devices is a decisive step towards higher productivity and consistent part quality.
FAQ
What types of workpiece clamps are suitable for automated machining?
Workholding clamps with quick-change modules, hydraulic actuation or magnetic systems are commonly used for automated machining. These workholding devices enable fast, repeatable part changes and integrate with zero-point systems.
How do workpiece clamps affect surface finish and tolerances?
A stable clamping concept minimises vibration and part movement; this improves surface finish and supports achieving narrow tolerances when using high-precision workpiece clamps or workholding devices.
Can the same workpiece clamps handle different part geometries?
Modular workholding clamps and adaptable clamping jaws allow flexible fixturing for varied geometries; combining vices, clamping plates and pratzen increases versatility on the shopfloor.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com