Secure and precise workholding for metalworking productivity
Workholding devices such as workpiece clamps and chuck systems provide absolute positional stability and vibration damping during milling, turning, drilling and grinding, ensuring parts remain free of play under high CNC cutting and feed forces. By transferring clamping loads into the machine table or spindle without deforming the component, a well engineered workholding solution improves machining accuracy, surface finish and process reliability while reducing set-up times. Modular systems from machine vices and chucks to zero-point systems and specialised fixtures enable fast changeovers and support both serial and single-part production, delivering consistent clamping force, repeatability and enhanced throughput.
17mm Ball Washer DIN 6319C For M16 Screws, Bore 17mm - AMF
Take advantage of the combination of DIN 6319C conformity, precise Ø 17 mm bore and compact seating geometry to secure reliable joint alignment and even load distribution. Order the item directly via Metav Werkzeuge or consult our advisors for specification support. Spherical washer DIN 6319C for M16 — Bore Ø 17 mm (AMF) Spherical washer DIN 6319C engineered for compensation of angular misalignment in M16 screw connections across clamped assemblies DIN 6319C standard conformity Compatibility with M16 fasteners Bore Ø 17 mm for accurate seating Compact design for misalignment compensation Reliable alignment and even load distribution A spherical washer manufactured to DIN 6319C provides a controlled spherical contact surface that compensates angular misalignment between a bolt head or nut and the mating surface. By creating a defined seating geometry, the component improves load distribution across the clamped joint, which reduces localised stress peaks and helps maintain clamp force under variable conditions. Compatibility with M16 fasteners and the precise Ø 17 mm bore ensure the washer locates reliably on the bolt shank, simplifying assembly and improving joint durability. Precise dimensions that aid installation and repeatability Key dimensions (D1 Ø17, D3 Ø30, H2 5.3, R 22) define the seating profile and overall envelope, enabling predictable behaviour in standardised assemblies. The defined outer diameter and height guarantee a repeatable contact angle, which is essential when multiple connections must perform consistently. With these measured values, the component supports efficient process planning, easier quality control and interchangeability within existing designs, eliminating guesswork during assembly or maintenance. Suitable applications and practical benefits in everyday use Designed for use wherever angular misalignment may compromise joint performance, the washer is suitable for structural connections, machine frames and fixturing systems utilising M16 screws. The part reduces the need for rework by accommodating slight surface irregularities and aligning fastener loads. Conformity to the DIN standard facilitates procurement and replacement planning, while the compact spherical seating minimises additional space requirements in confined assemblies. For swift supply and technical advice on compatibility, request the AMF spherical washer via Metav Werkzeuge — contact info@metav-werkzeuge.com or call +49 2822 7131930 for prompt assistance Technical data Article number: 4000833460NW Standard: DIN 6319C Description: Spherical washer for M16, bore Ø 17 mm Manufacturer: AMF Facts Bore diameter D1: 17 mm Outer diameter D3: 30 mm Height H2: 5.3 mm Radius R: 22 mm Suitable for: M16 Packaging unit: 1 UID: 4000833460NW Special features Conforms to DIN 6319C Compensates angular misalignment in bolted joints Defined spherical seating for uniform load distribution FAQ What is the primary function of this spherical washer? The spherical washer is intended to compensate for angular misalignment and to provide a uniform seating surface for M16 fasteners, improving load distribution in clamped joints. Is this part compatible with standard M16 bolts and nuts? Yes, the washer is specified for M16 applications and features a bore of Ø 17 mm to fit the bolt shank as per the designation. Which dimensions define the washer's seating geometry? Key seating geometry is given by D1 Ø17 mm (bore), D3 Ø30 mm (outer diameter), H2 5.3 mm (height) and radius R 22 mm, which together determine the contact angle and fit. Does the component meet any recognised standard? The part is manufactured to DIN 6319C, ensuring standardised form and interchangeability for assemblies that reference this specification. Can this washer be used to correct significant misalignment in joints? The washer compensates for moderate angular misalignment typical in bolted assemblies; for large misalignments, a detailed joint assessment and specialist solutions may be required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
17mm Washer DIN 6340 For M16 Bolts, 45mm Outside Diameter, 6mm Thickness - AMF
Take advantage of standardised DIN 6340 conformity, robust dimensional stability and a compact 6 mm thickness for dependable load distribution in bolted assemblies. Order the U washer directly via Metav Werkzeuge or consult our specialists for specification support. U washer DIN 6340 — Washer for M16 screws, 17 mm bore (AMF) A U washer DIN 6340 engineered for M16 screws with a 17 mm central bore, designed to ensure reliable load distribution and consistent fit in industrial fastening applications DIN 6340 standardised U washer For M16 screws, 17 mm bore 45 mm outer diameter, 6 mm thickness Improved bearing and reduced stress on threaded connections The DIN 6340 specification ensures a consistent geometry that benefits load-bearing joints. With an inner bore of 17 mm and a thickness of 6 mm, the component increases the contact area around the fastener head or nut, which reduces localised pressure and the risk of material deformation. In practical terms, this means longer service life for the joint and fewer re-tightening cycles. The combination of prescribed dimensions and standard compliance facilitates predictable performance in repetitive assembly processes, improving process reliability across production runs. Predictable fit for easier assembly and inventory control A defined outer diameter of 45 mm and precise bore tolerances allow for interchangeability in maintenance and production settings. By keeping dimensions standardised, the washer simplifies part selection during machine servicing and reduces downtime caused by mismatched components. The clear dimensional data supports procurement and storage planning: replacement parts are easily identified by their standard, diameter and thickness, so workshop and inventory management benefit from reduced complexity and faster turnarounds. Versatile use across industrial fastening tasks This U-shaped washer is suitable for a broad range of bolted assemblies where bearing surface and stabilisation are required. The washer’s geometry helps align the fastener, preventing pull-through in softer substrates and supporting clamping forces in steel or structural connections. For technicians and engineers, the part offers a straightforward solution when a standardised bearing washer is needed for M16 fasteners. The U washer DIN 6340 is thus a practical component for repair, retrofit and new-build applications where conformity and repeatable behaviour are priorities. Selection advice and compatibility considerations When specifying a washer, match the bore to the fastener’s shank; the 17 mm bore provides clearance for M16 threads while maintaining guidance for the bolt. The 6 mm thickness contributes stiffness under compressive load and assists in maintaining clamp force distribution. Note that material and surface treatment are not specified here; selection should consider corrosion resistance and electrical isolation requirements where applicable. For exact compatibility with a specific assembly, confirm material pairing and any coating needs before final selection. For supply and technical assistance regarding DIN 6340 U washers, contact Metav Werkzeuge GmbH at info@metav-werkzeuge.com or +49 2822 7131930 for reliable delivery and specification advice Technical data Article number: 4000833440NW Standard: DIN 6340 Type: Washer (U washer) Brand: AMF Facts Inner bore (D1): 17 mm Outer diameter (D2): 45 mm Thickness (S): 6 mm Special features Designed for M16 fasteners Conforms to standardised DIN geometry Suitable for industrial bolted assemblies FAQ What screw size is this washer designed for? This U washer is designed for M16 screws; the inner bore of 17 mm provides the necessary clearance for M16 threaded shanks. Does the washer conform to a recognised standard? Yes, the component conforms to DIN 6340, ensuring standardised geometry and predictable assembly behaviour for industrial applications. What are the key dimensions of the washer? The washer features a 17 mm inner bore, 45 mm outer diameter and 6 mm thickness (SKU 4000833440NW). Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
17–42mm Closure Clamp Horizontal Base With Hook, Spring-Loaded, 220N Push, 325N Hold - Kukamet
Take advantage of the combination of reliable 325 N holding force, compact 0.341 kg construction and a spring-loaded hook for fast, repeatable fastening in fixtures and small assemblies. Order the closure clamp directly via Metav Werkzeuge or ask our consultants if needed. Closure clamp 311 — horizontal-foot latch with hook and spring, arm 17–42 mm (Kukamet) Closure clamp 311 is a horizontal-foot latch engineered for secure, repeatable fastening on jigs, fixtures and small assemblies, offering quick-action closure and a compact footprint for workshop integration. *Robust black-oxide finish Spring-loaded quick action Hook connection for positive engagement Holds up to 325 N retention force Faster, repeatable clamping for production workflows The spring-loaded mechanism enables a swift over-centre action that reduces cycle time on repetitive tasks. With a clamping force of 220 N, the unit delivers a defined compressive action while the adjustable arm (17–42 mm) permits adaptation to common fixture profiles. The horizontal-foot mounting allows the latch to be mounted flush to plates and rails, giving a compact installation that preserves workspace and supports steady throughput. Built to last under workshop conditions A blackened finish (brünniert) provides enhanced surface protection and a professional appearance while the hook-style engagement ensures a positive, audible lock. The closure maintains a holding force of 325 N, which translates into secure retention of parts during machining or inspection. The clamp’s modest mass (0.341 kg) and a thread length of 75 mm allow a firm mechanical anchorage without undue bulk, supporting long-term reliability and reduced maintenance intervals. Easy integration into jigs, fixtures and small assemblies Designed for fixture builders and maintenance workshops, the latch offers straightforward mechanical integration: the horizontal foot provides a stable mounting platform and the hook connection simplifies alignment. The compact design supports close-packed layouts and repeatable positioning, which is advantageous for assembly lines or inspection jigs where consistent clamping force and quick release cut process time. The clamp is suitable wherever a dependable, quick-action fastening is required. Choose the Kukamet closure clamp 311 for reliable workshop fastening — contact Metav Werkzeuge for delivery and technical advice at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: B311-3-Y GTIN: 4061905078644 eClass: 21041718 ETIM: EC011973 Manufacturer: Kukamet Facts Arm range: 17–42 mm Max clamping force: 220 N Max holding force: 325 N Thread length: 75 mm Weight: 0.341 kg Special features Horizontal-foot mounting Spring-loaded action Hook connection for positive engagement Blackened (brünniert) finish Category: Clamps FAQ What arm widths does this latch accept? The closure clamp 311 accepts arms from 17–42 mm, enabling adaptation to a wide range of fixture profiles. What are the clamping and holding forces? The Kukamet closure clamp offers a clamping force of 220 N and a holding force of 325 N for secure retention during handling and light machining. How is the latch mounted to a fixture? Mounting is via a horizontal foot with a 75 mm thread length; the design ensures a firm attachment to plates and rails for repeatable positioning. Is the finish suitable for workshop environments? Yes, the blackened (brünniert) finish on the closure clamp 311 provides surface protection suited to workshop conditions and reduces visible wear. Which applications are typical for this clamp? This latch is ideal for jigs, fixtures, assembly benches and inspection equipment where quick-action, repeatable fastening is required; the Kukamet SKU B311-3-Y is designed for these use cases. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
17–42mm Closure Clamp With Hook, Spring-Loaded, 220N Press Force, Zinc Plated - Kukamet
Take advantage of a compact, spring‑assisted toggle clamp that combines galvanised construction, an adjustable arm (17–42 mm) and secure holding performance for reliable fixture work; order the clamp directly via Metav Werkzeuge or request specification advice from our consultants. Kukamet 311-3-Y toggle clamp — horizontal foot, spring‑assisted, adjustable arm 311-3-Y is a horizontal toggle clamp designed for fastening workpieces in jigs and fixtures where a consistent clamping action and corrosion resistance are required Galvanised steel construction Horizontal mounting foot Spring-assisted clamping action Adjustable arm 17–42 mm Consistent holding performance for repeatable tasks The 311-3-Y toggle clamp delivers measurable performance where repeatability matters: a holding force of 325 N and a closing force of 220 N provide stable restraint for many assembly, welding and test applications. These force figures indicate the clamp’s capacity to resist displacement under load, helping to reduce rework and downtime. Specified in newtons for clear comparison, the values are suitable for light-to-medium duty fixture work and serve as a reliable basis when selecting a clamp for production jigs or repair benches. Installation and adjustment designed for workshop efficiency Fitted with a horizontal mounting foot and an adjustable arm (17–42 mm), the clamp is simple to integrate into existing fixtures. The thread length of 75 mm allows fine height adjustment during set-up, while the built‑in spring supports smooth engagement and reduces operator effort during repetitive cycles. With a compact mass of 0.341 kg, the component is easy to position and replace in modular tooling systems. The hook configuration provides a secure contact point for a variety of striker plate geometries without complicating the mounting process. Durable finish and low‑maintenance operation for everyday use The galvanised surface treatment increases resistance to corrosion in typical workshop environments, extending service life and reducing the need for protective measures. Combined with robust mechanical design and a compact footprint, this clamp supports reliable clamping in production, maintenance and assembly contexts. The straightforward mechanism minimises wear and simplifies inspection routines, making it a practical choice for operations that prioritise uptime and predictable fixture performance. Select the Kukamet 311-3-Y when a compact, spring‑assisted horizontal toggle clamp is needed — contact Metav Werkzeuge for delivery options and precise application guidance from our Emmerich team. Technical data Article number: 311-3-Y Manufacturer: Kukamet GTIN: 8680731505382 SKU: 311-3-Y Material: Galvanised Mounting: Horizontal foot Special feature: With spring With hook: Yes Facts Weight: 0.341 kg Arm range: 17–42 mm Thread length: 75 mm Closing force (max): 220 N Holding force (max): 325 N eClass: 21041718 ETIM: EC011973 Special features Galvanised finish Spring-assisted action Hooked clamping point Compact design for modular fixtures Category: Toggle clamp FAQ What forces does the clamp provide and what do they mean? The clamp offers a closing force of 220 N (force applied during engagement) and a holding force of 325 N (resistance to displacement once engaged), values that indicate suitability for light-to-medium duty fixture and assembly tasks. How is the clamp mounted in a fixture? Mounting is via a horizontal foot, enabling secure attachment to baseplates and fixture plates; the 75 mm thread length allows for precise height adjustment of the adjustable arm. Can the clamp cope with corrosive workshop conditions? The galvanised finish provides enhanced corrosion resistance for typical workshop environments, reducing maintenance frequency and helping to prolong service life. Is arm adjustment straightforward for different workpiece sizes? Yes, the adjustable arm (17–42 mm) permits quick adaptation to varying workpiece profiles and striker positions, supporting flexible jig design without additional components. What makes this clamp suitable for repetitive assembly operations? The spring-assisted mechanism ensures smooth, repeatable engagement and reduces manual effort during frequent clamping cycles, while the hooked contact point secures the workpiece reliably. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
17–42mm Horizontal Base Toggle Clamp With Spring And Safety Lock, 325 N Holding Force - Kukamet
Take advantage of the combination of dependable clamping performance, compact design and simple adjustment to ensure consistent fixture results. Order directly via Metav Werkzeuge or contact our consultants for specification support and rapid supply from Emmerich. 311 Latching Clamp by Kukamet — Horizontal mount, safety lock The 311 Latching Clamp is a horizontal‑mount locking clamp designed for repeatable workholding and jig applications, featuring a spring‑loaded action and an integrated safety latch for secure, high‑cycle operation. Spring-loaded action with safety lock Horizontal-foot mounting for sturdy installation Adjustable arm 17–42 mm span Blackened finish with included hook Secure, measurable clamping for reliable production The compact locking device delivers a 220 N clamping force and a 325 N holding force, values that translate into predictable fixture behaviour on assembly lines and test jigs. These figures describe two different functions: the clamping force is the maximum pressure exerted during engagement, while the holding force indicates the retention under load once the latch is closed. The result is consistent repeatability and reduced rework in serial processes, making the clamp suitable for routine production tasks where process stability is a priority. Fast installation and straightforward adjustment save time Designed with a horizontal‑foot mounting, the clamp fits into standard fixture plates with minimal modification, enabling quick retrofit or new jig construction. The adjustable arm (17–42 mm) and thread length 75 mm allow fine tuning of engagement height and reach without replacing components, while the low mass (approx. 0.341 kg) keeps added inertia to a minimum. These design choices reduce setup time and make the clamp compatible with a wide range of part geometries. Built for safety and long service life A spring‑loaded action paired with a positive safety lock keeps the latch engaged under vibration and repeated cycles, reducing the risk of accidental release. The blackened finish provides basic surface protection and a uniform appearance for workshop environments, and the unit is supplied with a practical hook for direct attachment to the workpiece or fixture. Together these features support uninterrupted production and safer handling in high‑use applications. Practical uses and suitability for industry fixtures This locking clamp is ideal for repetitive assembly, quality inspection fixtures and small machining nests where a compact, reliable clamp is required. The combination of measurable holding values and a compact footprint makes the device particularly useful in confined setups and automated stations that demand consistent part positioning. The robust locking mechanism ensures long service intervals and predictable behaviour under frequent operation. For robust and repeatable workholding, consider the Kukamet 311 Latching Clamp — contact Metav Werkzeuge for technical advice or to secure supply from Emmerich: info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: B311-3-Y-L GTIN: 4061905080982 ECLASS: 21041718 ETIM: EC011973 SKU: B311-3-Y-L Core technical data Clamping force (max): 220 N Holding force (max): 325 N Arm span: 17–42 mm Thread length: 75 mm Weight: 0.341 kg Special features Horizontal-foot mounting Spring and safety lock Included hook Blackened finish With hook FAQ What clamping and holding forces does the clamp provide? The latch offers a 220 N clamping force and a 325 N holding force, providing measurable engagement and retention for repeatable fixtures. How is the clamp mounted to a fixture plate? Mounting is via the horizontal foot; the clamp is designed for horizontal‑foot installation in standard fixture plates and jigs. Can the reach be adjusted for different part heights? Yes, the arm is adjustable across a 17–42 mm span and includes a 75 mm thread length for fine height adjustment. Does the device include any safety features? The unit features a spring‑loaded mechanism combined with a positive safety lock to prevent unintended release under vibration or load. Is the clamp supplied ready for immediate installation? The clamp is supplied with the hook included and a blackened finish; it requires standard fixing to the fixture plate for immediate use. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
17–42mm Toggle Clamp Horizontal Base With Spring Safety Lock, 220N Thrust, Zinc-Plated - Kukamet
Robust, compact and practical: the zinc-plated construction combined with 220 N clamping force and an adjustable arm 17–42 mm delivers reliable holding for repetitive fixtures; order the 311 toggle clamp directly via Metav Werkzeuge or consult our specialists for application advice. 311 Toggle clamp — horizontal foot, spring-loaded with safety latch (Kukamet) A 311 toggle clamp for horizontal mounting, providing secure, repeatable workpiece holding in production and workshop fixtures. Horizontal-foot mounting for stable fixation Spring-loaded mechanism with safety latch Zinc-plated corrosion resistance Adjustable spindle 17–42 mm for versatility Consistent clamping performance for repetitive production Designed for fixtures and jigs where reproducible results matter, the 311 toggle clamp applies a defined 220 N clamping force and a 325 N holding force, ensuring components remain stationary during machining, assembly or testing. The adjustable arm 17–42 mm allows fine tuning of the contact point, which reduces setup time and increases throughput in repeat operations. Numerical values are given to enable straightforward selection against fixture requirements and to support process planning. Quick, safe operation reduces set-up time A spring-loaded action combined with a safety latch offers both immediate clamping and secure locking to prevent accidental release during cycle times. The horizontal mounting foot simplifies integration into base plates and fixture plates, while the built-in hook provides a positive engagement. This mechanism is engineered to shorten clamping cycles, improve operator confidence and lower the risk of rework due to movement during handling. Durable finish and compact design for workshop applications The zinc-plated surface protects the clamp against corrosion in typical workshop environments, while the compact mass (weight 0.341 kg) keeps added inertia low when used in automated or manual fixtures. The combination of a horizontal foot and compact dimensions makes the device suitable where space is limited but reliable fixation is required. The clamp’s straightforward geometry and serviceable spindle thread length mean it can be adjusted or replaced quickly, supporting steady production with minimal downtime. Contact Metav Werkzeuge for advice on fixture integration of the Kukamet 311 toggle clamp and for reliable supply from Emmerich — eMail: info@metav-werkzeuge.com / Tel: +49 2822 7131930 Technical Data SKU: 311-3-Y-L GTIN: 8682843523858 Manufacturer: Kukamet Core data Clamping force: 220 N Holding force: 325 N Arm range: 17–42 mm Thread length: 75 mm Weight: 0.341 kg Eclass: 21041718 ETIM: EC011973 Special features Mounting: horizontal foot Hook included Spring-loaded with safety latch Material/coating: zinc-plated FAQ What clamping and holding forces does this clamp provide? The Kukamet 311 toggle clamp delivers a clamping force of 220 N and a holding force of 325 N, suitable for many light- to medium-duty fixture tasks. Is the clamp suitable for cramped fixture layouts? Yes, the compact design and horizontal-foot mounting make the 311 toggle clamp appropriate for confined fixture plates and tight assembly stations. How is the clamping point adjusted? Adjustment is achieved via the spindle/arm, which covers a range of 17–42 mm; thread length is 75 mm to allow secure setting of the contact point. What finish does the clamp have and how does it affect durability? The clamp is zinc-plated, offering corrosion resistance for typical workshop environments and extending service life under normal operating conditions. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
18 mm Adjustable Clamp U‑Form/Swivel With Copper Platter, M16x6 Bolt, 0–100mm Height - Vertex
Take advantage of a compact clamp that combines adjustable height 0–100 mm, a copper platen and secure fit for 18 mm T‑slots to streamline batch fixturing. The precise 1.5 kgf clamping force and M16 bolt interface support repeatable setups; order the clamp directly via Metav Werkzeuge or consult our advisors for application-specific advice. VCB-405 clamp by Vertex — adjustable height 0–100 mm, copper platen VCB-405 is a compact workshop clamp designed for secure fixturing in machine tables and fixtures; suitable for 18 mm T‑slot applications and available in U‑shaped or rotatable configurations. Adjustable height 0–100 mm Includes copper platen Compatible with 18 mm T‑slot Clamping force 1.5 kgf Reliable fixturing for repetitive machining The clamp offers a robust solution for standard workshop fixturing where repeatability matters. With an adjustable height range of 0–100 mm, the device allows fine vertical positioning without requiring shims, reducing setup time and scrap. The combination of a compact footprint and M16 x 6" bolt interface permits straightforward integration into existing tool tables and fixture plates, supporting consistent clamping across production runs. Gentle workholding with a copper platen The integrated copper platen protects delicate workpiece surfaces while distributing clamping pressure evenly. For components that are prone to marking, the softer contact surface minimises cosmetic damage and reduces the need for secondary finishing. This design choice enhances part quality in small‑batch production and repair work where preserving surface condition is as important as holding strength. Adaptable geometry for mixed operations Available in an optional U‑shape or rotatable version, the clamp adapts to different workpiece geometries and machining directions. The rotatable variant allows angular alignment for fixtures that require non‑axial clamping, while the U‑shaped option provides low‑profile engagement for narrow parts. Such adaptability reduces the number of bespoke clamps required, streamlining inventory and tooling costs. Compact mass and clear compatibility data With a mass of 2.7 kg, the clamp is heavy enough to convey solidity yet light enough to be repositioned manually on benches and tables. Compatibility with 18 mm T‑slots and the specified M16 x 6" bolt means it fits common machine table standards without additional adapters. These clear, measurable parameters support fast purchasing decisions and predictable assembly in workshop setups. Practical benefits for everyday workshop use Engineered for dependable everyday use, the product balances ease of handling with functional durability. The modest 1.5 kgf clamping force suits secure holding of lightweight to medium components while the machine‑grade construction reduces wear over frequent cycles. For workshop managers seeking a simple, repeatable clamping element, the unit offers a pragmatic mix of protection, adjustability and standardised mounting. Contact Metav Werkzeuge to discuss how the Vertex VCB-405 clamp can be integrated into current fixturing and to reserve available stock for your workshop. Technical data SKU: VCB-405 GTIN: 4061905094613 eClass: 21049022 Core data Dimensions: 133 x 50 x 49 mm Weight: 2.7 kg Adjustable height: 0–100 mm T‑slot compatibility: 18 mm Clamping force: 1.5 kgf Bolt: M16 x 6" Special features Copper platen included Optionally U‑shaped or rotatable Brand: Vertex FAQ What materials and workpieces is the clamp suited for? The clamp is intended as a general-purpose workholding element; the VCB-405 clamp by Vertex performs well on standard metal and non-abrasive materials where a moderate clamping force and surface protection from the copper platen are required. Is the height adjustment tool-free or does it require tools? Height adjustment requires conventional workshop tools to lock the chosen position; the adjustable height 0–100 mm feature on the Vertex VCB-405 provides precise positioning once secured. Can the clamp be used on non-standard table slots? The clamp is designed for 18 mm T‑slot tables; for non‑standard slot sizes, additional adapters may be necessary to ensure correct mounting. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
18 mm Step Clamp M16 Bolt, 32x64x16mm, 0.16kg - Vertex
Benefit from a compact clamp that combines precise fitment for 18 mm T-slots, an M16 fastening interface and a lightweight profile for faster fixture changes and secure machining. Order directly via Metav Werkzeuge or consult our specialists for application advice and rapid supply. Step Clamp – Vertex compact step clamp with 18 mm T-slot compatibility and M16 bolt The Step Clamp is a compact workholding clamp designed for machining fixtures and CNC setups, engineered to fit standard 18 mm T-slots and to accept an M16 bolt for reliable clamping. Compact dimensions 32x64x16 mm Compatible with 18 mm T-slots M16 bolt interface for secure fastening Lightweight at 0.16 kg for easy handling Precision clamping for reliable setups The compact design of this step clamp delivers repeatable positioning in fixture assemblies by occupying minimal space while offering a defined clamp surface. With the 32x64x16 mm footprint and a standard 18 mm T-slot engagement, the element reduces obstruction in multi-station jigs and simplifies part access during machining. The M16 threaded interface provides a conventional fastening solution that is widely compatible with common clamping bolts and studs, ensuring stable force transmission without the need for special adapters. This combination promotes shorter setup times and consistent part quality. Compatibility that speeds fixture changeovers Designed as a universal step clamp, the component streamlines changeovers in production by matching widely used T-slot sizing and bolt standards. The reliance on an M16 connection means existing clamping hardware can be reused, lowering inventory complexity and reducing procurement lead times. Because the unit is purposely compact and light, workshop personnel can reposition clamps quickly when reconfiguring fixtures, improving throughput during batch changes. The geometry supports straightforward alignment with stop and locating elements common in machining fixtures. Compact design for lasting workshop performance A minimal weight of 0.16 kg and robust geometry make this clamp an unobtrusive yet durable workholding choice. The small form factor limits interference with cutting tool paths and helps maintain clear sightlines for measurement and quality checks. Built by Vertex, the component is suited to general CNC and manual milling environments where space efficiency and reliable fastening are priorities. The design focuses on practical workshop benefits rather than decorative features, offering predictable behaviour under routine clamping loads. Contact Metav Werkzeuge for specification matching, volume procurement or tailored advice based on Vertex clamping solutions and SKU 6215 Technical Data Article number: 6215 GTIN: 4061905093401 ECLASS: 21170107 Dimensions & Weight Dimensions: 32x64x16 mm Weight: 0.16 kg Compatibility & Fastening T-slot: 18 mm Bolt size: M16 Manufacturer: Vertex FAQ What T-slot size does the Step Clamp fit? The Step Clamp is designed for an 18 mm T-slot and engages securely in standard 18 mm machine table slots. Which bolt thread is required for fastening? Fastening is via an M16 thread; the Step Clamp accepts standard M16 bolts or studs for reliable clamping. What are the external dimensions and weight? Dimensions are 32x64x16 mm and the mass is 0.16 kg for the Step Clamp (SKU 6215). Is this clamp suitable for CNC fixtures and manual milling tables? Yes, the Step Clamp is intended for fixture use across CNC and manual milling setups where compact workholding and standard bolt interfaces are required. Which classification does this product use for procurement systems? The component is listed under ECLASS 21170107 for consistent catalogue and procurement identification. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
18 mm Step Clamp M16 Bolt, 38x100x19mm - Vertex
Efficient workholding with reliable clamping and compact dimensions ensures stable setups in short cycle times; combine the M16 stud and 18 mm T-slot compatibility for versatile fixture layouts and order via Metav Werkzeuge or consult our specialists for application advice. Step Clamp – Compact workholding for 18 mm T-slots (M16 stud) The Step Clamp is a compact workholding element designed for securing parts on 18 mm T-slot tables using an M16 stud. Compact 38 x 100 x 19 mm body M16 stud for standard clamping Fits 18 mm T-slot tables Lightweight 0.39 kg for easy handling Faster, more reliable set-ups for small-batch production High-precision machining benefits from rapid, repeatable clamping. The step clamp offers a compact footprint combined with a standard M16 fixing, which reduces setup time when exchanging fixtures or reconfiguring jigs. The low mass and slim profile enable quick repositioning, while the design supports secure seating on an 18 mm T-slot, helping to maintain workpiece stability during light to medium machining tasks. This contributes to higher throughput without compromising positional integrity. Clear compatibility and practical specifications for integration Integration into existing workstations is straightforward thanks to the clearly defined measurements: 38 x 100 x 19 mm overall size and 18 mm T-slot compatibility. The use of a standard M16 stud means the clamp fits common clamping kits and modular fixture systems, minimising the need for custom adaptors. At 0.39 kg, the component is easy to handle during fixture build-up and makes modular fixturing more ergonomic for operators who reconfigure setups frequently. Durable, precise performance aligned with workshop needs Although the raw data does not specify material or coating, the geometry and fastening method prioritise repeatable precision and robust seating. The compact design supports a lower profile clamping strategy, useful where clearance to the cutter is limited. For users seeking a balance between compactness and dependable clamp force, this component provides a practical solution that complements modular fixturing strategies and supports consistent part quality across production runs. Contact Metav Werkzeuge in Emmerich for tailored procurement advice and specification support — request details for the Step Clamp (SKU 6225) to ensure fit with your fixture system and 18 mm T-slot tables. Technical data Article number: 6225 GTIN: 4061905093333 Manufacturer: Vertex Facts Dimensions: 38 x 100 x 19 mm Weight: 0.39 kg T-slot width: 18 mm Bolt: M16 ECLASS: 21170107 Special features Compatible with 18 mm T-slots Compact step clamp design SKU 6225 Brand: Vertex FAQ What T-slot size does this clamp fit? The clamp is designed for 18 mm T-slot tables and locates securely in that standard slot width. Which thread or bolt is required to fasten the clamp? The component uses an M16 stud/fixing for clamping and integration into modular fixtures. What are the overall dimensions and weight of the clamp? Dimensions are 38 x 100 x 19 mm and the weight is 0.39 kg, suitable for easy handling during fixture setup. Is the clamp suitable for heavy-duty machining? The product data does not specify maximum load or material properties, so suitability for heavy-duty applications cannot be confirmed from the provided information. Who manufactures this clamp and what is the SKU? This clamp is manufactured by Vertex and is listed under SKU 6225 with GTIN 4061905093333. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
18 mm Step Clamp M16 Bolt, 38x150x22mm - Vertex
Take advantage of compact dimensions and a robust M16 clamping bolt for reliable hold-down in constrained fixtures; the Step Clamp combines stable mass with standard T-slot compatibility for consistent repeatability. Order the Step Clamp directly via Metav Werkzeuge or consult our team for application advice. Step Clamp – Vertex step clamp with M16 bolt and 18 mm T-slot compatibility Step Clamp is a compact clamping element for securing workpieces in machine table T-slots; designed for fixturing and general workholding where space and repeatable clamping are decisive Compact profile 38 x 150 x 22 mm Suitable for 18 mm T-slot M16 clamping bolt for high hold-down force Weighs 0.71 kg for stable clamping Secure hold-down for compact fixtures The compact profile and balanced mass yield stable clamping without occupying excessive table space. With overall dimensions of 38 x 150 x 22 mm and a mass of 0.71 kg, the component reduces vibration and improves machining repeatability in small- to medium-size workholding setups. The standard M16 bolt delivers a predictable clamping force that is compatible with common clamping hardware, supporting reliable part retention during milling, drilling or light machining operations. Faster set-up and consistent alignment A step-style design shortens fixture set-up times by providing defined contact geometry and repeatable seating. The compatibility with an 18 mm T-slot removes guesswork during positioning and allows straightforward integration into existing fixture plates. Because clamping force and contact height are predictable, inspection intervals and rework can be reduced, contributing to measurable efficiency gains on the shop floor and more consistent part quality over production runs. Easy integration into standard fixturing systems Intended for use in conventional fixturing applications, the clamp adapts to common machine tables and modular fixtures without special adapters. The concise form factor preserves table real estate while enabling secure hold-down for a variety of workpiece sizes. Supplied by the established Vertex brand, the component is suitable where compact, dependable clamping is required and where repeatability contributes directly to process reliability and throughput. For secure, space-saving clamping solutions from Vertex, contact Metav Werkzeuge in Emmerich for ordering and technical guidance delivered from our European warehouse. Technical data SKU: 6235 GTIN: 4061905093654 ECLASS: 21170107 Facts Dimensions: 38 x 150 x 22 mm Bolt: M16 T-slot compatibility: 18 mm Weight: 0.71 kg Special features Manufacturer: Vertex Intended for fixturing and workholding applications FAQ Are these clamps compatible with standard machine table T-slots? The clamp is compatible with an 18 mm T-slot; the Vertex Step Clamp (SKU 6235) is sized for standard 18 mm slot systems to simplify fixture layout. What bolt size is required for installation? Installation uses an M16 clamping bolt, providing consistent and robust hold-down capability for common clamping procedures. How much does the clamp weigh and how does that affect stability? With a mass of 0.71 kg, the component offers sufficient inertia for stable clamping, aiding vibration damping and repeatable part location. Is the Vertex Step Clamp suitable for precision fixtures? Yes, the Step Clamp from Vertex is designed for repeatable seating and predictable clamping, making it suitable for precision fixturing in many machining applications. Where can technical drawings and images be found? Technical drawings and detailed images are provided with the product listing; reference SKU 6235 when consulting documentation. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
18 mm T-Slot Nut Single M16 Thread, For 17.7x32x11mm Slot - Vertex
Take advantage of the combination of M16 thread, compatibility with 18 mm T-slots, and compact 17.7 x 32 x 11 mm dimensions for reliable fixture retention; order the fastening element directly via Metav Werkzeuge or consult the technical advisors for assistance. 3415M T-slot nut — M16 thread, for 18 mm T-slots (Vertex) A 3415M T-slot nut designed for clamping and fixturing tasks on machine tables with an 18 mm T-slot, supplied as a single-piece fastening element. M16 thread for standard clamping bolts Fits 18 mm T-slots on machine tables Single-piece design for straightforward installation Compact 17.7 x 32 x 11 mm dimensions Secure clamping where precision matters The M16 threaded profile and compatibility with 18 mm table slots make this fastening component a practical choice for workshop fixturing. Engineered to sit flush within the slot, the element ensures a stable contact point for clamping bolts and fixtures, reducing lateral movement during machining operations. Clear numerical specification of the dimensions supports precise planning of clamp layouts and toolpaths, while the standard thread size allows use with commonly available clamping hardware. Fast, repeatable set-up with a compact design A single-piece construction keeps installation steps to a minimum and simplifies inventory management. The compact 17.7 x 32 x 11 mm footprint permits close spacing of clamping points and contributes to efficient use of table real estate. Reduced assembly complexity shortens set-up times and supports higher throughput, which is a direct operational advantage for production environments where time and reproducibility are critical. Practical fit for clamping technology and fixtures This fastening element is tailored for machine tables and modular fixturing, enabling precise positioning of workpieces or accessories. The combination of standard M16 thread and slot compatibility facilitates integration into existing clamping systems without the need for custom adapters. Clear labelling and identification help maintain order in stores and on the shop floor, assisting procurement and maintenance teams to source the correct part rapidly. Contact Metav Werkzeuge to discuss the Vertex 3415M T-slot nut and secure the right components for reliable clamping from our Emmerich warehouse. Technical Data Article number: 3415M GTIN: 4061905089596 Designation: T-slot nut Version: single Facts Dimensions: 17.7 x 32 x 11 mm Thread: M16 T-slot width: 18 mm ECLASS: 21029107 Special features Single-piece fastening element Compatible with standard clamping bolts Compact format for tight fixture spacing FAQ What thread size does this T-slot nut use? The Vertex 3415M T-slot nut is supplied with an M16 thread suitable for standard clamping bolts and fittings. Which T-slot width is the nut designed for? This fastening element is designed to fit an 18 mm T-slot on machine tables and modular fixturing systems. Is the part supplied individually or in sets? The item is listed as a single version; the Vertex 3415M is supplied as an individual T-slot nut. What are the exact external dimensions of the nut? Dimensions are 17.7 x 32 x 11 mm, which supports compact clamping arrangements and accurate layout planning. How can this component be identified for ordering or inventory? Use the article number 3415M or GTIN 4061905089596 when ordering the Vertex T-slot nut to ensure correct procurement. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
18 mm T‑Slot 52‑Piece Clamping Kit With M16 Bolts, Flanges, Couplings - Vertex
The combination of a modular component range, M16-2.0P thread compatibility and an 18 mm T-slot fit delivers dependable, efficient workholding for general machining; order the kit via Metav Werkzeuge or contact the consultants for application advice. Clamping Tool Set CK-16 – Vertex — modular workholding for T-slot tables, M16 thread and extensive accessory range The Clamping Tool Set CK-16 is a compact, workshop-ready kit designed for secure fixture and workholding on standard T-slot tables across general machining and maintenance tasks. Modular components for versatile workholding M16-2.0P threaded bolts for standard fixtures Compatible with 18 mm T-slot tables Robust construction, total weight 12.6 kg Faster, more reliable set-ups for standard machine tables A modular clamping kit minimises fixture time by offering matched parts for repeatable installation. The M16-2.0P threaded bolts and 18 mm T-slot compatibility ensure straightforward integration with most machine tables, reducing cycle loss from re-clamping. By standardising on commonly used threads and T-slot sizes, the kit supports consistent clamping force and predictable repeatability, which leads to improved process throughput and fewer interruptions during small-batch or jobbing work. Organised components for consistent results and quick changes The kit contains a full range of bolts in both imperial and metric lengths together with T-nuts, couplings, flanges, clamps and blocks, all stored for easy identification and transport. This arrangement improves setup discipline and reduces the search time for matching parts on the shop floor. The set’s design supports modular combinations, enabling straightforward adaptation to diverse workpieces while maintaining clamping accuracy and repeatability — a practical advantage for mixed-production environments. Practical balance between portability and workshop readiness With a total mass of 12.6 kg, the set is substantial enough to feel robust yet compact for storage beside a machine table. The kit is suitable for routine fixture tasks where standard T-slot engagement is required and where a single, organised solution reduces tooling complexity. The 52-piece composition offers both variety and cohesion, making the set a pragmatic choice for maintenance shops, training workshops and small production cells seeking dependable, easy-to-manage clamping solutions. Contact Metav Werkzeuge in Emmerich for a tailored quotation and technical advice on the Vertex CK-16 clamping kit Technical data SKU: CK-16 GTIN: 4061905092619 eClass: 21041790 Manufacturer: Vertex Facts Weight: 12.6 kg T-slot width: 18 mm Bolt thread: M16-2.0P Pieces per set: 52 Included components Range of bolts in imperial and metric lengths T-nuts for 18 mm T-slots Couplings and flanges Clamps and blocking elements Modular design for standard workholding FAQ What T-slot size is this kit compatible with? The kit is designed for 18 mm T-slot tables; components such as T-nuts and flange pieces match that slot dimension for secure seating. Which thread size do the bolts use? The bolts supplied in the set use M16-2.0P threading, matching standard fixture practices for many machine tables and clamping systems. Is the kit suitable for a training workshop or small production cell? Yes, the organised composition and breadth of components make the clamping kit appropriate for training environments and small production cells where variety and repeatability are required. Does the set include clamps and blocks in addition to bolts? The clamping kit includes matching clamps, flanges, couplings and blocking elements alongside bolts and T-nuts to support a range of fixturing layouts. What is the total weight of the clamping kit? The complete set has a total weight of 12.6 kg, which balances portability with workshop durability. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
18 Pieces ER-32 Collet Set With NT-30 Shank - Vertex
Take advantage of precision clamping and secure spindle compatibility for consistent tool retention and reduced setup time; order the set directly via Metav Werkzeuge or consult the team for application advice. Vertex V-201 Collet Set — ER-32, NT‑30 taper Vertex V-201 collet set for reliable tool holding in workshop turning and milling applications with an SK/NT spindle interface ER-32 collets for precise clamping NT‑30 taper for SK spindle compatibility Supplied as a set for workshop readiness Robust construction, total weight 4.2 kg Consistent concentricity for repeatable machining results A well‑engineered collet system ensures concentric clamping and stable tool retention, which directly improves surface finish and dimensional consistency. The ER-32 specification provides a widely used clamping range suitable for common tool shank diameters, while the NT‑30 taper matches SK/NT spindle interfaces to guarantee a secure mechanical fit. Reduced runout leads to fewer rejects and longer tool life, so the tool‑holding solution becomes an investment in production reliability rather than a recurring expense. Faster set‑ups and predictable machine uptime The set format is designed for shops that require quick changeovers and dependable repeatability. Having a dedicated collet set minimises time spent searching for matching clamping components and simplifies inventory management in a busy workshop. The clear mechanical interface of the NT‑30 taper reduces alignment uncertainty when fitting the collet chuck to the spindle, supporting predictable cycle times and enabling smoother production planning. Built for everyday workshop use and handling The construction reflects a balance between durability and manageability: the total weight of 4.2 kg indicates a substantial, workshop‑ready kit that withstands handling and frequent use. Materials and machining quality deliver a stable clamping action across repeated cycles. For operations that prioritise reliability over novelty, this tool‑holding system offers a straightforward solution to maintain productivity while keeping maintenance routines simple. Practical compatibility and application guidance Intended for standard machining tasks in metalworking and general workshop environments, the set suits applications where a proven, widely supported collet interface is required. Compatibility with common ER‑32 tooling makes integration into existing fleets straightforward. If detailed tool shank sizes or special retention requirements are needed, technical enquiries are welcomed to confirm fit and function before purchase. Contact Metav Werkzeuge to secure a Vertex V-201 collet set for dependable tool retention or to request tailored advice from our consultants at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: V-201 GTIN: 4061905083082 eClass: 21022190 Brand: Vertex Set: yes Type: ER-32 Taper: NT-30 Weight: 4.2 kg Facts Weight (kg): 4.2 GTIN: 4061905083082 eClass: 21022190 SKU: V-201 Set: true Special features ER-32 collet type NT‑30 (SK) taper interface Supplied with collet chuck in set Designed for workshop tool holding and repeatable clamping FAQ What taper interface does the set use? The set uses an NT‑30 taper suitable for SK/NT spindle interfaces, ensuring a secure mechanical fit with matching spindles. Which collet size is included in the kit? The kit is specified as ER-32 type collets; the ER‑32 standard covers a common range of tool shank diameters for general machining. Is this suitable for high‑precision turning and milling? Yes, the collet system is designed to deliver improved concentricity and repeatability, supporting precision work in standard workshop environments. How heavy is the complete set? The total weight of the set is 4.2 kg, reflecting a substantial, workshop‑ready kit that is easy to handle and store. Can the set be used with existing ER‑32 tooling? Compatibility with existing ER-32 tooling is provided by the standard collet specification; the NT‑30 taper ensures proper spindle engagement when the machine accepts SK/NT tapers. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
18-Piece 3/32–1/2" ER-32 Collet Set With MT-4 Taper Collet Chuck - Vertex
Take advantage of the combination of ER-32 standard clamping, a MT-4 taper interface and reliable workshop compatibility to secure repeatable, high-precision toolholding. Order the set directly via Metav Werkzeuge or consult our advisors for configuration and delivery. V-427 ER-32 collet set with MT-4 taper by Vertex The V-427 is a compact collet set designed for secure clamping of cylindrical shanks via an ER-32 collet system and an MT-4 taper, suitable for general workshop and light industrial toolholding applications ER-32 standard clamping system MT-4 taper for wide spindle compatibility Precision-oriented concentricity performance Robust solution for routine machining tasks Consistent, industry-standard clamping for everyday workshop use The ER-32 collet family is an established standard for clamping metric and imperial cylindrical shanks, offering a versatile interface between cutters and spindle arbors. Integrated with the MT-4 taper, the set provides a reliable mechanical connection to machines that accept Morse taper tooling. This combination supports stable rotation and repeatable concentricity, which reduces runout and helps maintain cutting accuracy. The modular nature of the system simplifies tool changes and keeps set-up times predictable without resorting to specialised adapters. Clear operational advantages that improve process reliability Using a standardised collet system brings measurable operational benefits: consistent gripping force across the clamped shank, straightforward interchangeability and compatibility with a wide range of cutters and extensions. The ER-32 format permits the accommodation of commonly used shank diameters, while the MT-4 arbor ensures straightforward integration with suitable spindles. These characteristics translate into improved tool life and steadier machining results, making the solution appropriate for maintenance shops, toolrooms and small-series production where repeatability matters. Practical handling, maintenance and workshop integration Routine care of the collet system keeps performance stable: keep the seating surfaces clean, inspect for burrs or damage and protect mating surfaces from corrosion. The set is compact and workshop-ready, allowing straightforward storage alongside other toolholding components. Supplied as a coordinated system by Vertex, the set supports efficient tool management and helps standardise clamping across multiple machines. For users seeking dependable, standardised clamping without elaborate retrofit work, this solution offers immediate compatibility and practical advantages in day-to-day machining. For workshop-grade precision based on the ER-32 standard and MT-4 taper, contact Metav Werkzeuge in Emmerich to request the Vertex V-427 collet set and receive tailored advice on compatibility and delivery via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: V-427 GTIN: 4061905095450 Weight: 4.3 kg Numbers / Core Technical Data Taper: MT-4 Collet type: ER-32 Pieces per set: 18 Special features Set with collet chuck and MT arbor Suitable for standard ER-32 shank sizes Manufacturer: Vertex FAQ What machines are compatible with this collet set? The Vertex V-427 collet set is compatible with machines accepting an MT-4 taper and standard ER-32 collet chucks; it integrates with spindles and arbors designed for Morse taper connections. Which shank diameters can be clamped with ER-32 collets? ER-32 collets cover a range of common cylindrical shank diameters; the V-427 set uses this standard to accommodate typical cutter and tool shank sizes without custom adapters. Is the V-427 suitable for production or only for workshops? The V-427 by Vertex is appropriate for workshop use and light industrial production where standardised, repeatable clamping and straightforward tool changes are required. How should the collet set be maintained to ensure accuracy? Maintain the V-427 by keeping seating and taper surfaces clean, inspecting for wear or damage and protecting components from corrosion; regular checks sustain concentricity and clamping performance. Does the set include the collet chuck and the MT arbor? Yes, the V-427 is supplied as a coordinated collet set that includes the collet chuck designed for ER-32 collets and the MT-4 arbor for mounting. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
18/20mm Slot Nut For Fixed Mounting, Fits M6 x 16, H5 - AMF
Compact, reliable and made for mixed-profile setups: the combination of a fixed-mount design, compatibility with nominal groove 18 mm / 20 mm and support for M6 x 16 fasteners ensures consistent clamping and rapid assembly. Order the part directly via Metav Werkzeuge or consult the team for application advice. T-slot nut No. 6322A by AMF — nominal groove 18/20 mm, for fixed mounting A T-slot nut No. 6322A engineered for fixed mounting in machine and fixture grooves, providing a precise seating solution for profile-based assemblies. Fixed-mount design for secure assembly Fits nominal groove 18 mm (machine) / 20 mm (fixture) Compatible with M6 x 16 fasteners AMF quality with precise fit Precise seating for mixed groove systems The design delivers a repeatable, tight fit for combination applications where machine grooves and fixture slots differ. With nominal groove compatibility at 18 mm on machines and 20 mm on fixtures, the component maintains alignment under load and simplifies part selection in mixed environments. This precision reduces variability during setup and supports reliable positioning of tooling and workpieces. The low profile assists in maintaining compact assemblies without sacrificing contact stability, which is particularly valuable in constrained toolrooms and modular jig systems. Secure fixed mounting that speeds up production A fixed-mount configuration ensures stable clamping for repetitive cycles and heavier loads. The specification for M6 x 16 fasteners provides a clear, standardised interface for common assembly hardware, enabling quick installation with off-the-shelf screws. The robust seating principle reduces micro-movement and the risk of displacement during machining or inspection runs, which translates directly into fewer reworks and shorter machine downtime. Emphasis on measurable compatibility allows engineering teams to plan fixture layouts with predictable clamping performance. Practical installation and compatibility notes for workshop use Installation is straightforward when aligned with the groove nominal sizes; correct seating depth and orientation prevent twisting and ensure maximum contact area. The component is suitable for profile-based clamping systems and modular fixturing where a fixed anchorage is required rather than sliding adjustment. For procurement and layout planning, the clear designation of groove sizes and fastener compatibility supports parts lists and BOMs. When integration with existing fixtures is necessary, matching the nominal groove and fastener standard avoids unnecessary modifications and keeps assembly time to a minimum. For reliable fixture assembly with AMF components, contact Metav Werkzeuge for procurement guidance and technical clarification — info@metav-werkzeuge.com or +49 2822 7131930 to discuss specifications and delivery options. Technical data Article number: 4000833237NW Type: Nr. 6322A Product: Nutenstein (T-slot nut) Manufacturer: AMF Packaging unit: 1 Core dimensions Nominal groove (machine): 18 mm Nominal groove (fixture): 20 mm Height HL: 5 mm Suitable fastener: M6 x 16 Special features Fixed mounting design Label: Nutenstein Nr.6322A Nennmaß der Nut 18/20mm z.Festmontage AMF UID: 4000833237NW FAQ What groove sizes does this T-slot nut fit? The T-slot nut No. 6322A fits nominal groove sizes of 18 mm for machine grooves and 20 mm for fixture grooves, allowing use across mixed-profile systems. Which fastener is specified for secure installation? Installation requires an M6 x 16 fastener; this specification for the AMF T-slot nut No. 6322A ensures standardised, reliable clamping. Is this component suitable for fixed, non-adjustable mounting? Yes — the product is designed for fixed mounting, providing a stable anchorage where sliding or quick repositioning is not required. Can this part be used in modular fixturing systems? The design is compatible with profile-based fixturing and modular assemblies where groove nominal sizes match 18/20 mm, making it suitable for many workshop and production setups. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1800N Clamping Toggle Latch Vertical Base With Hook, 50mm Thread Length - Kukamet
Take advantage of a compact toggle latch that combines a 1,500 N closing force with an 1,800 N holding capacity and a durable blackened finish for consistent, repeatable fastening in fixtures; order the clamp directly via Metav Werkzeuge or consult our specialists for application advice. Toggle latch clamp 412 — vertical-foot lever clamp with hook The Toggle latch clamp 412 serves as a compact locking lever for fixtures and jigs where secure, repeatable closure is required; its vertical-foot mounting and integrated hook make it suitable for upright attachment and reliable retention. Vertical foot mounting for upright attachment Hook-equipped design for secure locking Max clamping force 1,500 N Holding force up to 1,800 N Blackened finish resists wear Reliable clamping for repeatable setups A lever-style locking clamp delivers quick-action closure with predictable force. The mechanism provides a closing force of 1,500 N and a holding force of 1,800 N, values that translate into secure retention for routine production cycles. These metrics support faster set-up times and reduced rework because components remain fixed during machining, assembly or testing. The hook element ensures the latch remains engaged under vibration, improving process stability and lowering the risk of unintended release. Compact form for tight fixtures and straightforward mounting Designed for integration into confined fixtures, the clamp features a vertical foot for upright attachment and a threaded length of 50 mm for height adjustment and alignment. At approximately 0.21 kg, the unit is lightweight yet robust, simplifying retrofits and multi-station installations. The compact footprint allows closer packing of clamps on jigs, enabling efficient use of table space and faster changeovers while maintaining consistent clamping performance. Durable finish and low-maintenance operation The component is supplied with a blackened finish that reduces visible wear and provides basic corrosion resistance in standard workshop conditions. The lever action is straightforward to operate and requires minimal upkeep, which helps to reduce downtime and maintenance costs. Constructed for repeated cycles, the device offers reliable behaviour in manual and semi-automated applications, delivering predictable clamping force over long service intervals. Contact Metav Werkzeuge for tailored supply and technical clarification regarding the Kukamet toggle latch clamp 412 — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data SKU: B412-2 GTIN: 8680731508635 eClass: 21041718 ETIM: EC011973 Manufacturer: Kukamet Core technical figures Max clamping force: 1,500 N Holding force: 1,800 N Threaded length: 50 mm Weight: 0.21 kg Special features and design Vertical foot mounting With hook Blackened finish Category: Clamp FAQ What maximum clamping force does this toggle latch provide? The clamp provides a maximum closing force of 1,500 N as specified for the Kukamet toggle latch clamp 412 (SKU B412-2). Is the latch suitable for upright mounting on fixtures? Yes; the product is supplied with a vertical foot for upright attachment, allowing straightforward installation in jigs and fixture plates. Can the latch sustain vibration or intermittent shock loads? The hook-equipped design and the specified holding force of 1,800 N ensure secure retention under typical workshop vibrations when the latch is correctly mounted. What adjustment options are available for alignment? Adjustment is achieved via the 50 mm threaded length, which permits fine tuning of engagement height and preload in the clamping arrangement. How resistant is the surface to wear and corrosion? The blackened finish provides basic wear resistance and helps protect the surface in standard workshop environments; for aggressive conditions, further corrosion protection should be considered. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
180mm Milling Arbour Key DIN 6368 For Arbour Ø16mm, Hardened Steel - TECWERK
The combination of DIN 6368 conformity, a hardened special steel construction and a 180 mm overall length ensures secure tightening of cutter clamping screws and reliable leverage in workshop use; order the tool directly via Metav Werkzeuge or consult the advisers for application-specific guidance. Milling Arbor Key DIN 6368 – 16 mm Arbor, 180 mm (TECWERK) The Milling Arbor Key DIN 6368 is a hardened workshop tool designed for tightening and loosening cutter clamping screws on 16 mm arbors in milling setups. DIN 6368 compliant tool Suitable for 16 mm arbor 180 mm overall length for leverage Hardened special steel, blued finish Consistent clamping force for repeatable machining quality The tool is engineered to deliver a predictable torque transfer when working with cutter clamping screws, supporting consistent tool retention and repeatable results. Conformity with DIN 6368 provides a verifiable standard for dimensions and fit, while the specification for use with a 16 mm arbor reduces uncertainty during tool selection. This focus on measurable compatibility minimises set-up time and supports a smoother production flow, particularly in frequent-change operations where reliability of clamping is essential. Robust construction to withstand routine workshop stress Manufactured from hardened special steel and supplied with a blued finish, the key resists wear and presents a corrosion-resistant surface treatment suitable for a busy workshop environment. The material choice and heat treatment ensure edge and profile stability at the contact points, which preserves fit and function over prolonged use. The blued surface aids in visual inspection of wear and reduces the need for early replacement, contributing to lower lifetime costs and dependable service intervals. Practical length and ergonomics to improve handling efficiency With a total length of 180 mm, the wrench provides additional leverage for secure engagement with cutter clamping screws while remaining compact enough for work at the machine. The geometry supports controlled torque application without excessive force, reducing the likelihood of over-tightening. Designed primarily for tightening and loosening, the tool complements standard milling setups and helps maintain cycle times by enabling quick, dependable adjustments at the spindle or arbor. Discuss the suitability of this TECWERK milling arbor key with Metav Werkzeuge to confirm fitment for existing setups and arrange delivery from Emmerich. Technical data Article number: 4000832438NW Norm: DIN 6368 Product type: Milling arbor key Suitable for: Dorn-Ø 16 mm Facts Overall length: 180 mm Packaging unit: 1 Special features For tightening and loosening cutter clamping screws Designed for use with equipment to DIN 6367 Special steel, hardened and blued finish FAQ What arbor diameter does the key fit? The key is designed for a 16 mm arbor and is specified accordingly in the product data for precise compatibility. Is the tool compliant with a recognised standard? Yes, the tool is produced to DIN 6368, ensuring dimensional conformity and interchangeability in standard milling applications. What material and finish are used for durability? The milling arbor key is made from hardened special steel with a blued finish, providing wear resistance and basic corrosion protection suitable for workshop use. Can this key be used to both loosen and tighten clamping screws? The tool is intended for both tightening and loosening of cutter clamping screws and is dimensioned to work reliably at the specified 16 mm arbor interface. Which SKU identifies this product for ordering? Refer to SKU 4000832438NW when ordering the TECWERK milling arbor key or when requesting technical clarification. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
180mm Pneumatic Clamp Horizontal Base, 4.5kN Thrust, 5.0kN Hold, 95° Arm, Zinc-Coated Heavy-Duty - Kukamet
Reliable production clamping that combines a zinc-plated heavy-duty arm with up to 5,000 N holding force delivers consistent, repeatable results for jigs and fixtures; order the clamp directly via Metav Werkzeuge or consult our specialists for application advice. Pneumatikspanner 631 — horizontal-foot pneumatic clamp with 95° swing (Kukamet) The Pneumatikspanner 631 is a pneumatic clamp designed for secure, repeatable workholding in assembly, fixturing and light production environments, featuring a robust mounting foot and a heavy holding arm for stable clamping. Zinc-plated construction for corrosion resistance Massive holding arm for high rigidity Max holding force 5,000 N Horizontal-foot mounting, 95° swing Consistent clamping force for repeatable production The 631 model provides repeatable clamping through a combination of a sturdy actuator and a reinforced arm, ensuring parts remain stable during machining or assembly. With a max holding force of 5,000 N and an actuator force rated at 4,500 N, the unit converts pneumatic input into reliable mechanical restraint. This performance reduces setup variation and scrap rates, which supports higher throughput and predictable process outcomes. The clamp’s zinc-plated finish protects contact surfaces in busy shops and extends service intervals. Robust design for long service life and simple integration A massive holding arm and horizontal-foot mounting make the device straightforward to mount on fixtures and tooling plates while delivering high rigidity where it matters. The 180 mm arm gives a practical reach without compromising stiffness, so parts can be positioned and clamped from a convenient orientation. The compact footprint and 95° swing angle simplify integration into existing jigs; the format suits repetitive applications where quick pneumatic actuation replaces hand levers for consistent cycle times. Clear operational benefits and straightforward technical fit By converting compressed-air input into a dependable mechanical lock, this pneumatic clamp reduces manual handling and supports automated workflows. The construction and rated forces make it suitable for repetitive clamping tasks where stability and cycle reliability are priorities. For users less familiar with industrial clamping terms: the holding force indicates the maximum static restraint the unit can apply, while the actuator force describes the pneumatic push available to operate the mechanism—both determine whether a clamp is suitable for a given workpiece and process. For secure, repeatable clamping with proven workshop durability, contact Metav Werkzeuge for ordering and technical consultation — Metav’s team in Emmerich can advise on fixture integration and delivery options Technical data SKU: 631-5-D-C2 Model: 631 Manufacturer: Kukamet Category: Spanner eClass: 21021004 ETIM: EC011973 Core technical data Arm length: 180 mm Max holding force: 5,000 N Max actuator force: 4,500 N Swing angle: 95° Design & features Horizontal-foot mounting Zinc-plated material Massive holding arm Suitable for lever-clamp style applications FAQ What clamping force can be expected from this clamp? The Pneumatikspanner 631 offers a maximum holding force of 5,000 N, providing robust restraint for typical assembly and fixture tasks. How is the clamp mounted to a fixture? Mounting is via a horizontal foot; the horizontal-foot design simplifies attachment to plates and tooling bases and supports a 95° swing. Is the clamp suitable for harsh workshop environments? The zinc-plated finish provides corrosion resistance, making the unit suitable for standard workshop conditions where occasional exposure to moisture or oils occurs. What reach does the clamp arm provide? The arm length is 180 mm, offering practical reach for many jig and fixture layouts while maintaining stiffness for secure clamping. Who supplies and supports this clamp in Europe? Kukamet supplies the clamp; Metav Werkzeuge acts as the responsible partner for distribution and advice, offering fixture planning and delivery services. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
180mm Pneumatic Clamp Horizontal Foot, 4.5kN Push / 5kN Hold, Massive Holding Arm, 95° - Kukamet
Take advantage of the combination of high clamping force, robust zinc-plated construction and straightforward horizontal-foot mounting for consistent cycle-time performance; order directly via Metav Werkzeuge or consult our specialists for integration advice. 611 Pneumatic Clamp — Horizontal-foot mounting with 180 mm arm (Kukamet) The 611 pneumatic clamp is a production-grade pneumatic clamping unit designed for secure, repeatable holding in assembly and machining fixtures, mounted via a horizontal foot for compact installation. High holding force 5000 N 180 mm reach with massive holding arm Zinc-plated corrosion protection Pneumatic actuation for fast cycle times Reliable clamping power for automated workflows Built for repetitive production environments, the 611 pneumatic clamp delivers a measured holding force of 5000 N and an actuation force of 4500 N, providing the necessary clamping stability for downstream processes. The numerical specification of force indicates the maximum static retention and the actuator output respectively, enabling planners to match the clamp to fixture loads and safety factors. The clear rating of forces supports machine integration and risk assessments, reducing uncertainty in production planning. Robust materials and extended reach reduce rework The clamp’s zinc-plated body offers corrosion resistance suitable for workshop and light industrial atmospheres, while the massive holding arm gives mechanical rigidity during load application. An arm length of 180 mm increases effective reach without compromising stiffness, which helps to avoid part deformation and subsequent rework. These physical characteristics translate into fewer stoppages and a more predictable quality outcome on batch runs. Space-saving mounting and straightforward cycle integration A horizontal foot mounting keeps the unit low-profile on top plates and pallets, simplifying jig layout and enabling denser fixture packing. The clamp operates over a 95° travel angle, allowing reliable locking and release within typical fixture kinematics. Pneumatic actuation delivers fast, repeatable strokes that integrate directly with compressed-air control systems, improving takt time without adding complex electrical control. Maintenance is simplified by the uncomplicated mechanical design and the use of standard pneumatic ports. For reliable, workshop-ready clamping from Kukamet, contact Metav Werkzeuge to discuss application details or request a tailored quotation — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data SKU: 611-5-D-C2 Manufacturer: Kukamet Name: Pneumatic clamp 611 Facts Actuation force: 4500 N Holding force: 5000 N Arm length: 180 mm Operating angle: 95° eClass: 21021004 ETIM: EC011973 Special features Material: zinc-plated Mounting: horizontal foot Massive holding arm Pneumatic actuation Catalog page available (PDF) FAQ What maximum holding force does the clamp provide? The clamp offers a maximum holding force of 5000 N, specified for static retention under normal operating conditions for the Kukamet pneumatic clamp (SKU 611-5-D-C2). Is the clamp suitable for integration into automated fixtures? Yes; pneumatic actuation and a compact horizontal-foot mounting make the unit suitable for automated assembly lines and palletised fixture systems. What is the arm reach and how does it affect fixture design? The arm provides an effective reach of 180 mm, allowing greater clearance for odd-shaped parts while maintaining rigidity with its massive holding arm construction. What corrosion protection is applied to the device? The body is zinc-plated, providing corrosion resistance appropriate for many workshop and light industrial environments. Which materials or process areas is this clamp most appropriate for? The design is intended for general production and assembly tasks where secure, repeatable clamping is required; selection should be confirmed against part geometry and process forces. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
180mm Tool Holder For Steel Holder Head D1 For Turning Bars 40mm Clamping Height - TECWERK
Taking advantage of the holder’s 40 mm clamping height and 180 mm overall length ensures stable tool positioning and reduced setup times in turning operations; for procurement or detailed fit checks, order via Metav Werkzeuge or consult the technical team for compatibility guidance. TECWERK Interchangeable Holder for steel holder head D1 — 40 mm clamping height, 180 mm overall length The TECWERK Interchangeable Holder for steel holder head D1 secures turning tools in quick‑change tool posts, providing consistent tool height and reliable repeatability for workshop and production environments. Quick-change holder for turning tools 40 mm clamping height for consistent tool position 180 mm overall length for stable overhang Compatible with steel holder head D1 Precise, repeatable clamping reduces setup time and scrap A defined 40 mm clamping height guarantees a reproducible tool centre relative to the workpiece, which simplifies alignment after tool changes and minimises rework. The holder’s geometry is designed to deliver repeatable clamping for turning operations, so cycle time is reduced through faster setups. For production runs where consistency matters, the controlled tool height translates into fewer adjustments and improved first‑pass yield, supporting lean workflows and predictable part quality. Stable overhang and robust feel for vibration control With a 180 mm overall length, the component balances accessibility to the cutting zone with sufficient rigidity to keep chatter under control. The extended length provides a beneficial reach while the construction supports axial and radial stability during cuts. By reducing vibration at the tool tip, the holder helps maintain surface finish and tool life, which in turn lowers operating costs and preserves downstream processes that rely on accurate contours. Seamless integration with D1 steel holder heads Designed explicitly for the steel holder head D1, this interchangeable unit fits established quick‑change systems without the need for additional adapters. Compatibility with the D1 standard saves time during retrofits and prevents unnecessary retooling expenses. The result is a compact clamping solution that suits both single‑machine shops and high‑mix production, allowing machines to be reconfigured swiftly while keeping datum points consistent. Practical advantages for workshops and production lines The quick‑change concept supports flexible tool management: fewer dedicated tool posts are required, and reconfiguration becomes a matter of minutes rather than hours. This holder is aimed at machinists and maintenance planners who prioritise uptime and predictable performance; its simple interface with D1 heads streamlines inventory and reduces the variety of spare parts needed on the shelf. Combined with Metav’s distribution and advice, the product is positioned to support both occasional users and continuous manufacturing environments. For technical verification or to check suitability for a specific turning setup, contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 for prompt consultation and ordering assistance. Technical data SKU: 2000832161NW Article: Interchangeable holder for steel holder head D1 Manufacturer: TECWERK Facts Overall length: 180 mm Clamping height (A): 40 mm Packaging unit: 1 UID: 2000832161NW Special features For turning tools Compatible with steel holder head D1 Quick‑change/interchangeable holder Application: lathe/turning operations FAQ What does the 40 mm clamping height mean for setup? The 40 mm clamping height defines the tool centre relative to the spindle axis; with the TECWERK interchangeable holder this height delivers reproducible positioning, reducing alignment time after tool changes. Is the holder compatible with other quick‑change systems? The unit is engineered for the steel holder head D1; compatibility with other systems depends on their interface—adaptation may be required for non‑D1 standards. How does the 180 mm overall length affect machining? A 180 mm overall length provides increased reach while maintaining sufficient rigidity to reduce vibration, improving surface finish and tool life during turning. Are material specifications available for the holder? Material information is not specified in the provided data; for detailed composition and heat‑treatment data, please request the technical datasheet from the supplier. Can this holder improve tool change times on small batches? Yes, the quick‑change design shortens tool swaps and helps maintain consistent tool height, which is especially beneficial for high‑mix or small‑batch production where frequent changes are required. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund
180mm Toolholder for Steel Holder Head D1 With 50mm Mounting Height - TECWERK
Take advantage of a compact combination of precise clamping, standardised dimensions and straightforward compatibility to reduce setup time and maintain consistent turning results; order the interchangeable holder directly via Metav Werkzeuge or ask our consultants if technical advice is required. Interchangeable holder for steel holder head D1 – for turning bars, 50 mm clamping height (TECWERK) The Interchangeable holder for steel holder head D1 is a precision toolholder designed for workshop and industrial turning operations, offering a 50 mm clamping height and a standardised total length for reliable tool set-up. For steel holder head D1 Clamping height 50 mm Total length 180 mm Designed for turning bars Faster set-up through standardised clamping geometry The holder provides a consistent, repeatable clamping height of 50 mm, which simplifies tool changeover and reduces machine downtime. Because the unit matches the common D1 steel holder head interface, it eliminates ambiguity in tool selection and supports predictable machining set-ups. This direct compatibility shortens preparation time, improves process stability and helps maintain consistent cutting conditions across shifts. Predictable machining with defined overall dimensions With a total length of 180 mm and a clearly defined interface, the component supports precise positioning and reliable tool projection. The defined geometry assists in calculating cutting forces and clearances, and the standardised dimensions allow straightforward integration into existing tool systems. Clear numeric values enable planning of tool offsets and collision checks, which contributes to safer and more efficient lathe operation. Robust design for industrial turning applications Manufactured for use with turning bars, the holder focuses on mechanical stability and repeatable clamping to withstand routine workshop stresses. The solid construction reduces vibration at the cutting edge and supports consistent surface finish and tool life. For operations that demand steady performance, the component’s engineered fit and secure interface with the steel holder head ensure dependable machining results. Suitable applications and practical advantages Intended for lathe and turning-tool workflows, the holder is appropriate where a fixed clamping height and reliable mechanical interface are required. The straightforward design means fewer variables during set-up, making it suitable for series production and mixed-batch work. The practical benefit is a reduction in set-up errors and a more efficient changeover routine, which together improve overall shop-floor productivity. Contact Metav Werkzeuge for detailed advice on integrating this TECWERK interchangeable holder into existing tool systems and to arrange supply from our Emmerich warehouse via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 2000832162NW SKU: 2000832162NW Facts Total length: 180 mm Clamping height: 50 mm Packaging unit: 1 Special features Suitable for steel holder head D1 Execution: for turning bars Product type: Interchangeable holder Brand: TECWERK UID: 2000832162NW FAQ Is this holder compatible with standard D1 steel holder heads? Yes. The interchangeable holder is made to fit the D1 steel holder head interface and is specified for use with that type of holder in turning applications. What is the clamping height and why does it matter? The device features a clamping height of 50 mm, which ensures consistent tool tip height and simplifies set-up of tool offsets and cutting parameters in lathe operations. Can the holder be used for different turning bars? The holder is executed specifically for turning bars and provides a fixed mechanical interface; variation in bar geometry should be checked against the holder’s dimensions before use. Does the total length affect machine clearance? Yes. The total length of 180 mm should be considered when calculating overhang and clearance to avoid collisions and to ensure correct tool projection. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
180mm Vertical Clamp 2,000N Press Force, 6,000N Holding Force, 120° Heavy-Duty Arm, Blackened - Kukamet
High clamping reliability is delivered by the combination of a 6,000 N holding force, a robust 180 mm massive arm and a secure vertical foot; this makes the unit especially suitable for repetitive fixture work and ensures stable production cycles. Order the clamp directly via Metav Werkzeuge or consult our specialists for application advice. Vertikalspanner 242 — Vertical clamp with 180 mm massive arm by Kukamet The Vertikalspanner 242 is a vertical clamp optimised for heavy-duty fixture and jig applications, offering strong clamping and a compact footprint for integration into benches and tooling plates. Massive 180 mm holding arm for strong leverage Vertical foot for secure bench or fixture mounting Holding force up to 6,000 N for heavy-duty clamping Blackened finish for corrosion resistance and durability Dependable clamping power for production and jigs The clamping device provides a 6,000 N holding force combined with a 2,000 N pressing force, delivering a clear performance advantage where repeatable, secure holding is required. These rated forces translate into less slippage, reduced rework and a lower risk of part movement during machining or assembly. The 120° lever angle supports effective toggle action, converting operator input into strong, stable clamping without excessive travel. Presented as a compact vertical unit, this clamping solution suits serial operations and fixtures where consistent clamping behaviour is essential to maintain throughput and quality. Robust construction for long service life and simple installation Built with a massive 180 mm arm and a blackened finish, the clamp resists wear and offers enhanced surface protection against corrosion in workshop environments. The vertical foot mounting option allows secure attachment to benches or dedicated fixture plates and simplifies alignment in vertical orientations. With a listed mass of 2.376 kg, the unit provides tactile stability while remaining easy to handle during fitting. The solid construction reduces maintenance intervals and supports predictable performance over extended production runs, helping to keep downtime and total cost of ownership low. Integration into tooling and practical operational benefits The vertical design and compact profile make the clamp straightforward to include in jigs, assembly stations and dedicated fixtures. The combination of toggle mechanics and the 2,000 N pressing force permits firm clamping with clear open/close positions, which benefits automated or manual workflows that require quick, repeatable engagement. Because the clamp is engineered for mounting on a vertical plane, it minimises interference with adjacent tooling and preserves access to the workpiece. For applications that demand repeatability and robust retention, this type of lever clamp is a pragmatic choice that supports efficient cycle times and consistent results. If clarification is required on suitability for a specific fixture, technical advice is available to assist with integration choices. Contact Metav Werkzeuge for tailored advice and secure supply of the Kukamet Vertikalspanner 242 from our Emmerich warehouse; our specialists will advise on mounting and application integration Technical data Article number: 242-6-D-C3 GTIN: 8682843520864 Manufacturer: Kukamet Core data Arm length: 180 mm Holding force: 6,000 N Pressing force: 2,000 N Weight: 2.376 kg Lever angle: 120° Special features Material/finish: blackened finish Mounting type: vertical foot Massive holding arm Category: Spanner FAQ What holding force does the clamp provide? The clamp delivers a holding force of 6,000 N, suitable for heavy-duty clamping tasks in fixtures and jigs. Can the unit be mounted on a fixture plate? Yes, the vertical foot mounting allows secure attachment to benches and fixture plates for reliable integration. What is the arm length and why does it matter? The arm measures 180 mm; the extended lever improves mechanical advantage and aids consistent clamping pressure. Is the clamp suitable for serial production use? The design and rated forces make this clamp appropriate for repetitive production environments where repeatable clamping is required. Who supplies technical advice and availability for this clamp? Metav Werkzeuge can provide application guidance and supply details for the Kukamet Vertikalspanner 242 Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
180mm Vertical Clamp 2000N Press Force, Three-Point Massive Arm With Safety Lock, 100° - Kukamet
Take advantage of precise, repeatable clamping thanks to a robust 180 mm holding arm and a proven safety locking system; combine high retention capacity with easy fixture integration via the vertical foot and secure your production processes with confidence. Order the clamp directly via Metav Werkzeuge or consult our specialists for application advice. Vertical clamp 242 — vertical workholding with a massive arm and safety lock A Vertical clamp 242 designed for secure fixture workholding where a long reach and reliable locking are required in assembly and machining applications Robust 180 mm holding arm Safety locking for secure clamping Max. holding force 6,000 N Vertical foot mounting for fixture plates Consistent clamping performance for machining and assembly The device delivers a clear technical advantage by separating pressing force and holding force: a pressing force of 2,000 N provides the necessary clamp actuation while a holding force of 6,000 N secures parts during machining and handling. This distinction ensures stable workpieces under lateral loads and vibration, reducing rework and downtime. The long 180 mm arm and its 100° operating angle provide practical reach for fixtures, while the massive holding arm minimises flex and maintains positional accuracy. Fast installation and safe, repeatable operation on fixture plates Designed with a vertical foot for direct mounting to fixture plates and tooling blocks, the clamp integrates into modular production setups with minimal adaptation. At 2.52 kg the unit is substantial enough to remain stable yet compact for dense fixture layouts. The safety locking mechanism holds the clamp securely in position during set-up and transport, reducing the risk of accidental release and improving operator confidence. The blackened finish gives a professional surface appearance and aids in routine visual inspection. Durable design that supports continuous workshop use Constructed for repetitive production use, the clamp combines a solid arm and straightforward locking elements to lower maintenance requirements and support long service intervals. The simple mechanical design makes inspection and part replacement practical without specialised tools, helping to keep throughput steady. For customers seeking predictable, robust workholding in small-batch or series production, this workholding device offers a reliable foundation for fixtures and jigs. Discuss Kukamet vertical clamp options with Metav Werkzeuge in Emmerich for tailored advice and assured supply of robust workholding components Technical data Article number: 242-6-D-L-C3 GTIN: 8682843520895 ECLASS: 21041717 ETIM: EC011973 Manufacturer: Kukamet Facts Arm length: 180 mm Max. pressing force: 2,000 N Max. holding force: 6,000 N Angle: 100° Weight: 2.52 kg Special features Massive holding arm Safety locking mechanism Vertical foot mounting Blackened finish Category: clamps FAQ What is the difference between pressing force and holding force? The pressing force (2,000 N) is the actuation load that closes the clamp; the holding force (6,000 N) is the retention capacity that prevents part movement when the Vertical clamp 242 is locked. Can the clamp be mounted on standard fixture plates? Yes, the Vertical clamp 242 is supplied with a vertical foot for direct mounting on fixture plates and tooling blocks used in assembly and machining cells. Is the clamp suitable for repeated production cycles? The clamp’s massive arm and simple locking design are intended for repetitive use and low-maintenance environments, making it appropriate for continuous workshop operation. What material and finish does the clamp have? The unit has a blackened finish, which provides a professional surface appearance and facilitates visual inspection. Which SKU should be referenced when ordering or enquiring? Reference SKU 242-6-D-L-C3 when enquiring about this vertical clamp to ensure correct identification. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
180mm Vertical Clamp 4,500N Closing Force, Massive Holding Arm, Blackened Finish - Kukamet
The combination of a massive holding arm, compact vertical mounting and a high holding capacity of 5,000 N ensures secure, repeatable clamping in confined fixtures; benefit from consistent workholding and reduced rework. Order the clamp directly via Metav Werkzeuge or consult our specialists for application advice. Vertikalspanner 212 — Vertical clamp with 180 mm arm by Kukamet The Vertikalspanner 212 is a compact vertical clamp engineered for solid workholding in jigs and small machine fixtures, offering high clamping reliability where space is limited. Massive 180 mm holding arm Vertical-foot mounting for stable set-up Up to 5,000 N holding force Blackened finish for corrosion resistance Reliable clamping that cuts rework and downtime The clamp delivers a defined holding force and a reliable clamping force, minimising slip and the need for repeated adjustments. With a maximum 5,000 N holding capability and a peak clamping force of 4,500 N, this device stabilises components during machining and assembly processes, helping to reduce scrap rates. The robust massive arm transfers force directly to the workpiece, promoting repeatable results and supporting steady cycle times in production and repair workshops. Space-efficient mounting for tight fixtures Designed with a vertical foot for direct, compact attachment, the unit integrates readily into confined set-ups and modular tooling plates. The 180 mm arm provides reach without requiring excessive clearance, while the overall mass and balance—at about 1.466 kg—keep the clamp unobtrusive on fixtures. This combination supports flexible placement in jigs and reduces the need to redesign existing tooling, allowing faster retrofit into established production lines. Finish and construction for long service life Surface treatment is a blackened finish, providing basic protection against corrosion and daily wear in workshop conditions. The straightforward, robust construction requires little upkeep; routine checks and light lubrication are usually sufficient to maintain consistent performance. The design emphasises durability and low maintenance, making it suitable for busy environments where dependable, long-term operation is required. Where it works best and what it improves Ideal for bench fixtures, small-indexing stations and assembly jigs, the clamp enhances workholding precision in repetitive operations. By providing steady, measurable clamping, it improves process reliability and helps increase overall throughput. The device is particularly well-suited to users seeking a compact lever-clamping solution that combines a substantial holding capacity with simple mounting and robust build quality. For reliable workshop clamping choose the Kukamet Vertikalspanner 212 via Metav Werkzeuge — contact Metav Werkzeuge for tailored advice at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data SKU: B212-5-D-C2 GTIN: 8682843522370 Model: 212 Brand: Kukamet Facts Arm length: 180 mm Holding force (max): 5,000 N Clamping force (max): 4,500 N Weight: 1.466 kg eCl@ss: 21041717 ETIM: EC011973 Special features Material/finish: blackened finish (Schwarz brüniert) Mounting type: vertical foot Massive holding arm Category: Spanner Story trigger: lever clamp Catalog: 212-D-katalogseite.pdf FAQ What is the maximum holding force of this clamp? The maximum holding force is 5,000 N for the Vertikalspanner 212 from Kukamet, providing strong retention for demanding workholding tasks. How is the clamp mounted in a fixture? Mounting is via a vertical foot, allowing direct attachment to jigs and plates for compact, stable installation. Is the finish suitable for workshop environments? Yes, the blackened finish on the Kukamet vertical clamp offers basic corrosion resistance and supports low-maintenance operation. What is the arm length and how does it affect reach? The arm length is 180 mm, giving sufficient reach for many jig and fixture arrangements without occupying excessive space. Which SKU should be referenced when ordering or specifying this clamp? Use SKU B212-5-D-C2 when specifying or ordering the Kukamet Vertikalspanner 212. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Secure components with reliable workpiece clamps
Workpiece clamps, also known as workholding clamps or workholding devices, form the essential mechanical interface between machine and part in industrial fabrication. They keep components absolutely play-free, positionally accurate and vibration-resistant during milling, turning, drilling or grinding.
How workpiece clamps ensure process stability
A correctly specified clamping concept transfers the high cutting and feed forces of modern CNC machines into the machine table or spindle without deforming the part. The right combination of mechanical, hydraulic, pneumatic or magnetic solutions enables fast, repeatable setups and supports automated part change where required. Typical applications range from single-part turning to high-volume series milling and complex five-axis machining.
Concrete production benefits at a glance
- repeatable positioning: reduces scrap and rework
- high clamping forces: withstands aggressive cutting without part movement
- reduced set-up time: modular systems and quick-change features speed throughput
- improved surface finish: vibration damping for finer results and tighter tolerances
- flexible compatibility: vices, chucks, clamping plates and zero-point systems for diverse geometries
Why Metav's range is the practical choice
Metav combines decades of specialist know-how with a broad, handpicked range that democratises precision for workshops and industry alike. Based in Emmerich, Metav acts as a quality filter for the European market and supplies more than 250,000 products from precision metrology to complete workshop equipment. With the trust of over 48,000 customers, Metav offers a single-source approach that reduces supplier complexity and secures dependable delivery to your workbench.
Technical data
- function: mechanical interface between machine and workpiece
- primary requirements: absolute positional accuracy; vibration reduction; high clamping forces
- technologies: mechanical, hydraulic, pneumatic, magnetic
- typical components: machine vices; chucks; clamping plates; zero-point systems; pratzen; clamping jaws
- application areas: milling; turning; drilling; grinding; automated part change systems
- production benefits: reduced set-up time; enhanced process security; optimised series and single-part production
The practical summary
Workpiece clamps bring the stability and repeatability required to meet tight tolerances and excellent surface quality, making them indispensable across machining operations. Choosing the right workholding clamps and modular workholding devices is a decisive step towards higher productivity and consistent part quality.
FAQ
What types of workpiece clamps are suitable for automated machining?
Workholding clamps with quick-change modules, hydraulic actuation or magnetic systems are commonly used for automated machining. These workholding devices enable fast, repeatable part changes and integrate with zero-point systems.
How do workpiece clamps affect surface finish and tolerances?
A stable clamping concept minimises vibration and part movement; this improves surface finish and supports achieving narrow tolerances when using high-precision workpiece clamps or workholding devices.
Can the same workpiece clamps handle different part geometries?
Modular workholding clamps and adaptable clamping jaws allow flexible fixturing for varied geometries; combining vices, clamping plates and pratzen increases versatility on the shopfloor.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com