Secure and precise workholding for metalworking productivity
Workholding devices such as workpiece clamps and chuck systems provide absolute positional stability and vibration damping during milling, turning, drilling and grinding, ensuring parts remain free of play under high CNC cutting and feed forces. By transferring clamping loads into the machine table or spindle without deforming the component, a well engineered workholding solution improves machining accuracy, surface finish and process reliability while reducing set-up times. Modular systems from machine vices and chucks to zero-point systems and specialised fixtures enable fast changeovers and support both serial and single-part production, delivering consistent clamping force, repeatability and enhanced throughput.
180mm Vertical Clamp 4.5kN Clamping Force, Massive Holding Arm, Galvanised - Kukamet
Rely on the combination of a galvanised construction, a massive holding arm and up to 5,000 N of holding force for secure, repeatable workholding. Order the 212 Vertical Clamp directly via Metav Werkzeuge or ask our consultants if needed. 212 Vertical Clamp by Kukamet — galvanised lever clamp with 180 mm arm The 212 Vertical Clamp is a vertical lever clamp designed for secure fixture and jig applications in workshops and light industrial settings. 5,000 N secure holding force 180 mm solid holding arm Galvanised finish for corrosion protection Vertical foot mounting for stable installation Consistent clamping force for reliable production The clamp delivers a holding force of 5,000 N with a maximum pressing force of 4,500 N, offering a clear performance margin for repetitive tasks. This force profile reduces part movement during machining and assembly, which improves process stability and lowers scrap rates. The lever-style mechanism converts manual input into a robust, constant hold; technical users will appreciate the predictable force transmission when integrating the clamp into jigs or fixture plates. The numeric values provide a verifiable basis for selecting the correct workholding device for specific materials and cycle requirements. Durable construction that suits workshop conditions Constructed from galvanised steel and equipped with a massive holding arm, the clamp is built to withstand everyday workshop environments. The corrosion-resistant finish extends service life where humidity or coolant exposure is present, while the solid arm minimises flex under load. At approximately 1.466 kg, the unit balances rigidity with manageable mass for fixture design. The vertical foot mounting ensures a low-profile attachment point, allowing stable installation on bench tops or fixture plates without complex substructures. Fast mounting and repeatable operation save time Featuring a vertical-foot mounting arrangement and a proven lever clamp concept, the product enables quick installation and repeatable clamping cycles. This supports higher throughput by cutting setup time in jigs and reducing manual rework. The 180 mm arm provides reach where workpieces require lateral clearance; the substantial arm geometry also aids in maintaining clamping trajectory over repeated cycles. Assistance is available from Metav Werkzeuge for specification checks and integration advice to ensure the clamp suits the application and fixture layout. Contact Metav Werkzeuge today to specify the Kukamet 212 Vertical Clamp for secure fixture setups and to request tailored advice from our specialists. Technical data SKU: 212-5-D-C2 GTIN: 8680731501780 Manufacturer: Kukamet Weight: 1.466 kg Material: Galvanised steel Facts Arm length: 180 mm Holding force: 5,000 N Maximum pressing force: 4,500 N Special features Mounting: vertical foot Massive holding arm Lever clamp type Category: Clamps (Spanner) FAQ What is the maximum holding force of the 212 Vertical Clamp? The 212 Vertical Clamp provides a holding force of up to 5,000 N, suitable for many fixture and jig applications. What material and finish does the clamp have? The clamp is made of galvanised steel, offering corrosion resistance for workshop environments. How is the clamp mounted? Mounting is via a vertical foot, enabling a stable, low-profile attachment to fixture plates or workbenches. Is the 180 mm arm suitable for larger workpieces? The 180 mm solid holding arm provides extended reach and additional clearance for parts where lateral space is required. Can the clamp be used in production fixtures with repeated cycles? Yes, the lever clamp design offers repeatable clamping cycles and predictable force transmission for production use. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
180mm Vertical Clamp With Horizontal Base, 5,000N Holding Force, Robust Arm & Safety Lock - Kukamet
Combine robust holding force and a massive holding arm with safety lock for secure, repeatable clamping; order the unit directly via Metav Werkzeuge or consult our technical advisors for application support. Vertikalspanner 211 – vertical clamp with 180 mm arm and 5,000 N holding force (Kukamet) The Vertikalspanner 211 is a vertical clamping device designed for secure workpiece fixation in workshops and light production environments, offering a compact footprint and reliable locking for repetitive clamping tasks. Vertical clamp »211« by Kukamet Massive holding arm with safety lock Max. holding force 5,000 N Horizontal foot for stable mounting Dependable clamping performance for repetitive processes The clamp delivers a holding force 5,000 N and a clamping force 4,500 N, values that indicate the device's capacity to maintain workpiece position under processing loads. In practice, the distinction between holding and clamping force matters: the holding force describes retention under shear or pull-off, while the clamping force refers to the pressure applied to the workpiece surface. This combination ensures that the component stays put during machining, measuring or assembly steps, reducing rework and cycle-time losses. The specification set supports planning for fixtures and tooling layouts where consistent clamp performance is required. Robust construction that reduces setup interruptions Built with a massive holding arm and a safety lock, the unit is engineered to resist wear from frequent operation. The mechanism uses a horizontal-foot mounting to provide lateral stability on jigs and plates; the blackened finish offers corrosion resistance and a professional surface appearance. At approximately 1.51 kg, the device balances solidity and manageable handling during fixture assembly, allowing technicians to position and secure clamps quickly while maintaining a high level of operational safety through the integrated locking feature. Space-saving design with flexible mounting options Featuring an 180 mm arm, this vertical clamp occupies little vertical space while providing sufficient reach for many typical setups. The horizontal foot is suitable for mounting to plates, fixture bases or tooling blocks, enabling flexible placement in confined workstations. The compact footprint and conservative mass make the device appropriate where multiple clamps are required on a single jig, promoting efficient use of bench space and straightforward integration into existing clamping schemes. Built for workshop reliability and predictable supply Manufactured by Kukamet and offered through Metav's distribution, the clamp is intended for workshops and light production where repeatable, low-maintenance components are essential. The simple mechanical design minimises routine maintenance needs and supports predictable uptime. For complex fixtures or unusual materials, the specification data and the clamp's features allow planners to assess suitability quickly and incorporate the device into broader production or inspection processes. For a tailored recommendation on integrating the Kukamet vertical clamp into fixtures or small-series production, contact Metav Werkzeuge for reliable advice and supply from Emmerich: +49 2822 7131930 or info@metav-werkzeuge.com Technical data Article number: B211-5-D-L-C2 Designation: Vertikalspanner 211 Manufacturer: Kukamet Material / finish: blackened finish Mounting: horizontal foot Core specifications Arm length: 180 mm Weight: 1.51 kg Max. holding force: 5,000 N Max. clamping force: 4,500 N eClass: 21041717 ETIM: EC011973 Special features Massive holding arm Safety lock Horizontal-foot mounting Compact design for fixture use FAQ What is the difference between holding force and clamping force? The holding force describes retained load (here 5,000 N) while the clamping force (4,500 N) is the pressure applied to the workpiece; the Vertikalspanner 211 specifies both for reliable fixture design. Can the clamp be mounted on custom fixture plates? Yes, the horizontal foot is suitable for mounting on plates or tooling blocks, enabling the clamp to be integrated into customised fixtures. Is the device suitable for frequent operation in production? The robust design with a massive holding arm and safety lock makes the clamp appropriate for repetitive use in workshops and light production environments. What surface finish does the clamp have and why does it matter? The clamp has a blackened finish, which improves corrosion resistance and provides a durable surface for prolonged workshop use. What are the typical applications for this vertical clamp? Typical uses include workpiece positioning, holding during measuring operations, light machining and repetitive assembly tasks where secure vertical clamping is required. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
180mm Vertical Clamp With Massive Holding Arm, 4.5kN Thrust / 5kN Hold, Zinc-Plated - Kukamet
Take advantage of the combination of durable construction, high holding force and compact integration for reliable fixture clamping in production and workshop environments. Built with a galvanised finish, a 180 mm arm and a 5,000 N holding capacity, the unit delivers secure positioning with low upkeep. Order the vertical clamp directly via Metav Werkzeuge or ask our consultants for tailored advice. Vertical clamp 211 — Kukamet vertical toggle clamp with 180 mm arm and 5,000 N holding force The Vertical clamp 211 is a compact vertical toggle clamp designed for workshop jigs, assembly stations and light production fixtures, combining a robust holding mechanism with corrosion-resistant construction. 5,000 N holding capacity 4,500 N clamping force 180 mm arm length Galvanised, corrosion-resistant finish Secure clamping performance for repetitive operations The clamp provides notably high static retention: a 5,000 N holding force and a 4,500 N clamping force ensure components remain fixed during machining, welding or assembly. Measured forces are expressed in Newtons to enable direct comparison with machine specifications and fixture requirements; this makes selection straightforward for planning production processes. The rigid design reduces micro-movement in the workpiece, which supports consistent tolerances and fewer rejects. By choosing a device with defined mechanical characteristics, process reliability is increased and cycle-time optimisation becomes easier to calculate. Designed to integrate and endure in workshop environments Constructed with a galvanised finish and a massive holding arm, the clamp resists surface corrosion and maintains mechanical accuracy over prolonged service. The horizontal foot mounting enables straightforward installation onto plates and fixture bases, while the 180 mm arm extends reach without compromising stability. At a lightweight 1.468 kg, the unit is easy to position during jig assembly yet robust enough to withstand daily operational stress. The combination of durable materials and compact geometry simplifies retrofitting into existing tooling setups and reduces the need for frequent replacement. Low-maintenance handling and sourcing confidence Maintenance requirements are minimal due to the corrosion-resistant coating and the simple mechanical toggle action; routine inspection and lubrication suffice to preserve performance. Supplied under the Kukamet brand and available through Metav Werkzeuge, the clamp benefits from a tested supply chain and European distribution. Metav’s role as a quality filter for the market supports dependable delivery and product traceability, which is particularly valuable when specifying fixtures for series production. The clear specification and consistent sourcing contribute to predictable long-term availability for maintenance and extension of existing jigs. For robust, corrosion-resistant clamping with dependable holding capacity choose the Kukamet vertical clamp 211—contact Metav Werkzeuge in Emmerich for advice and order placement via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 211-5-D-C2 GTIN: 8680731501414 Manufacturer: Kukamet Material: galvanised Mounting: horizontal foot Facts Arm length: 180 mm Holding force max: 5000 N Clamping force max: 4500 N Weight: 1.468 kg eClass: 21041717 ETIM: EC011973 Special features Massive holding arm Galvanised finish Horizontal-foot mounting Category: Clamps FAQ What is the maximum holding capacity of this clamp? The clamp provides a maximum holding capacity of 5,000 N as specified for the Kukamet vertical clamp 211 (SKU 211-5-D-C2). Can the clamp be mounted directly to a fixture plate? Yes, the horizontal-foot mounting allows direct fastening to fixture plates and bases for secure integration into jigs. Is the finishing suitable for humid or workshop conditions? The galvanised finish on the vertical clamp 211 gives improved corrosion resistance, making it suitable for typical workshop environments. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
180mm Vertical Clamp With Massive Holding Arm, 4.5kN Thrust, 5kN Hold Force - Kukamet
Take advantage of proven clamping performance, robust construction and a compact 180 mm reach to keep setups precise and efficient. The combination of a massive holding arm, 5,000 N maximum holding force and a horizontal-foot mounting supports secure workpiece positioning and repeatable machining results. Order the clamp directly via Metav Werkzeuge or ask the consultants for specification advice. Vertical clamp 211 (B211-5-D-C2) — 180 mm arm, 5 kN holding force — Kukamet Vertical clamp 211 is a lever-operated vertical clamp intended for secure workpiece holding in machining, assembly and testing applications Massive holding arm for stable clamping 180 mm arm for extended reach 5,000 N maximum holding force Horizontal-foot mounting for secure base Secure, measurable clamping that reduces rework The clamp delivers a quantifiable holding performance: a maximum holding force of 5,000 N combined with a maximum pressing force of 4,500 N gives a reliable safety margin for typical workshop operations. The specified forces translate directly into improved positional stability during machining, lowering the risk of vibration-induced errors and material rejects. The 180 mm arm provides a practical working clearance for fixturing while keeping the overall footprint compact, which helps maintain throughput on benches and fixtures without complex repositioning or additional supports. Robust construction for faster setup and longer service life A massive holding arm and a blackened burnished finish create a durable clamp that resists wear under repetitive use. The lever-operated design enables quick engagement and release, shortening cycle times during batch work and repeated clamping operations. With a weight of 1.468 kg, the unit balances solidity and manoeuvrability for fitters and machinists who adjust fixtures frequently. The horizontal-foot mounting provides a stable base that integrates easily into existing plates or tooling blocks, reducing the need for bespoke adaptors and saving assembly time. Easy integration into production workflows and low maintenance The lever clamp concept supports fast, repeatable clamping with minimal adjustment, which benefits jigs, assembly stations and inspection setups seeking predictable results. The component’s finish and simple mechanical design keep maintenance demands low: periodic checks of the lever pivot and a light lubrication cycle are generally sufficient to maintain function. Supplied as a compact, lever-operated clamp, the B211-5-D-C2 model fits typical workshop and production environments and can be combined with common fixturing elements to increase output reliability without complex retrofits. Choose Kukamet’s vertical clamp 211 for consistent clamping performance—contact Metav Werkzeuge for tailored advice and reliable supply from Emmerich Technical data SKU: B211-5-D-C2 GTIN: 8680731507782 Manufacturer: Kukamet Eclass: 21041717 ETIM: EC011973 Material finish: blackened burnished Core specifications Arm length: 180 mm Max pressing force: 4,500 N Max holding force: 5,000 N Weight: 1.468 kg Special features Mounting type: horizontal foot Massive holding arm Lever-operated vertical clamp Story trigger: lever clamp FAQ How much holding force does the clamp provide? The Kukamet vertical clamp 211 provides a maximum holding force of 5,000 N and a maximum pressing force of 4,500 N for secure fixturing. What is the arm length and how does it affect application? The arm length is 180 mm, which gives extra reach for workpieces while maintaining a compact footprint suitable for benches and fixture plates. Which mounting option is available for this clamp? The unit is supplied with a horizontal-foot mounting, designed to be fixed to tooling plates or machine fixtures for a stable base. What material finish does the clamp have and why is it beneficial? The clamp features a blackened burnished finish, providing enhanced surface protection and resistance to wear in workshop environments. Is this clamp suitable for repetitive production use? Yes; the robust construction, lever operation and low maintenance needs make the clamp appropriate for repeated clamping cycles in production and assembly contexts. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
180mm Vertical Clamp With Vertical Base, 4.5kN Thrust, 5kN Holding Force, Zinc Plated - Kukamet
Robust clamping performance meets compact design: the galvanised construction and massive holding arm deliver high repeatability and secure fixture retention under up to 5,000 N holding force and 4,500 N pressing force. Order directly via Metav Werkzeuge or request guidance from our consultants for application-specific selection. Vertical clamp 212 — Vertical clamp with 5,000 N holding force, galvanised (Kukamet) A vertical clamp 212 engineered for secure workpiece retention in jigs and assembly fixtures, combining a sturdy vertical foot with a safety locking mechanism for repeatable operation. Massive holding arm with safety lock 5,000 N maximum holding force 4,500 N pressing force capacity Galvanised finish for corrosion resistance High clamping force for consistent cycle times The clamp provides 5,000 N holding force and 4,500 N pressing force, values that translate into reliable, repeatable retention during machining and assembly operations. High clamping capability reduces part movement and rejects, improving first-pass yield and lowering rework rates. The numerical specification of force enables planners to select the device based on calculated clamping requirements; where a specific clamping load is required, the force figures act as a direct basis for machine and fixture design decisions. The compact mass ensures a favourable power-to-weight ratio, supporting automated or manual applications without excessive inertia. Durable components for low maintenance and long service life Constructed with a galvanised finish and a massive holding arm, the device resists wear and environmental exposure in busy workshop settings. The robust locking mechanism secures the arm in the clamped position and prevents accidental release, contributing to operator safety and process stability. Material and design choices reduce the frequency of adjustment and replacement, which lowers lifecycle maintenance and downtime. The overall mass of 1.32 kg balances solidity with ease of integration into multi-clamp fixtures and modular tooling systems. Fast installation and adaptable mounting for versatile use Supplied with a vertical foot mounting arrangement and an arm length of 180 mm, the clamp fits common fixture geometries while offering sufficient reach for many part profiles. The vertical mounting keeps the clamping action clear of critical tool zones, simplifying collision planning in CNC setups and assembly stations. The compact footprint and clear performance data make it suitable for small-batch fixtures as well as larger production jigs, enabling quick specification changes and faster tooling cycles. Integration into standard fixture plates is straightforward, allowing planners to standardise clamping across different assemblies for more efficient spare-part management. Contact Metav Werkzeuge for technical advice on integrating the Kukamet vertical clamp 212 into production fixtures; Metav’s Emmerich-based team provides product expertise and supply reliability to support seamless procurement and deployment Technical data Article number: 212-5-D-L-C2 GTIN: 8680731501810 Manufacturer: Kukamet Facts Weight: 1.32 kg Arm length: 180 mm Pressing force (max): 4,500 N Holding force (max): 5,000 N ECLASS: 21041717 ETIM: EC011973 Special features Galvanised finish Vertical foot mounting Massive holding arm Safety locking mechanism Category: Clamps FAQ What maximum holding force does the clamp provide? The Kukamet vertical clamp 212 offers a maximum holding force of 5,000 N, specified for reliable retention in fixtures and assembly jigs. Is the clamp suitable for harsh workshop environments? Yes, the galvanised finish on the clamping device gives improved resistance to corrosion and workshop contaminants, extending service life under typical industrial conditions. How is the clamp mounted in a fixture? The unit uses a vertical foot mounting arrangement with an 180 mm arm reach, enabling direct attachment to fixture plates or subplates in vertical clamping configurations. Can the clamp be used in automated production cells? The clamp’s compact mass (1.32 kg), clear force ratings and secure safety lock make it suitable for integration in both manual and automated fixtures where defined clamping forces are required. What is the article number or SKU for ordering? Ordering reference: 212-5-D-L-C2 (SKU). The same identifier is used for stock and logistic purposes. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
180mm Vertical Clamp With Vertical Base, Massive Holding Arm And Safety Locking, 4.5kN Pressure/5kN Holding Force - Kukamet
Take advantage of the massive holding arm, safety interlock and high clamping capacity to secure workpieces reliably in production and assembly fixtures. The compact design and 180 mm reach support efficient handling and quick fixture changes. Order via Metav Werkzeuge or consult our specialists for integration advice. Vertikalspanner 212 – vertical toggle clamp with 180 mm arm and safety interlock The Vertikalspanner 212 is a vertical toggle clamp designed for secure, repeatable fixation of workpieces in jigs, welding fixtures and assembly lines. Massive holding arm with safety interlock 180 mm arm length for extended reach Clamping force up to 4,500 N Holding force rated at 5,000 N Blackened burnished finish for corrosion resistance Reliable hold with integrated safety The clamp delivers a secure, repeatable clamping action thanks to the massive holding arm and integrated safety interlock, which prevents unintended release during operation. This design reduces rework and minimises the need for manual re-tightening, supporting a steadier production rhythm and fewer process interruptions. The locking mechanism is engineered for visible engagement and clear tactile feedback, which aids assembly-line operators and fixture designers alike. Heavy-duty clamping in a compact form Engineered for demanding applications, the device provides a clamping force of 4,500 N and a holding force of 5,000 N, enabling the secure fixation of robust components. The 180 mm arm length increases reach without compromising stability, while the overall mass of 1.32 kg keeps the clamp easy to position and replace in modular fixtures. These figures translate into practical benefits: consistent clamping pressure across cycles and reduced fixture size compared with bulkier alternatives, which helps to streamline tool layouts and save bench space. Durable finishing and straightforward mounting Finished in a blackened burnished finish, the clamp resists surface wear and offers basic corrosion protection suitable for workshop and light industrial environments. The vertical foot mounting simplifies attachment to plates and bases commonly used in jig construction, allowing fast retrofit or installation in new fixtures. Together, the material treatment and mounting concept promote longevity and consistent performance under repetitive use, supporting long-term operational reliability. For reliable clamping solutions based on Kukamet quality characteristics, contact Metav Werkzeuge to discuss the Vertikalspanner 212 (SKU B212-5-D-L-C2) and suitability for specific fixtures — phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data SKU: B212-5-D-L-C2 Model: 212 Manufacturer: Kukamet Category: Spanner Core technical figures Clamping force: 4,500 N Holding force: 5,000 N Arm length: 180 mm Weight: 1.32 kg Special features Massive holding arm Safety interlock Mounting: vertical foot Finish: blackened burnished Suitable for use as a lever/toggle clamp FAQ What applications suit this vertical toggle clamp best? The Vertikalspanner 212 is suitable for jigs, welding fixtures and assembly stations where secure, repeatable clamping is required; its force ratings support medium to heavy workpieces. How much clamping force does the clamp provide? The clamp provides a clamping force of 4,500 N and a holding force rated at 5,000 N, values that enable reliable fixation of robust components in production settings. How is the clamp mounted to a fixture? Mounting is via a vertical foot, designed for direct attachment to base plates and fixture plates common in jig and fixture construction. What surface protection does the clamp have? The clamp features a blackened burnished finish that offers enhanced surface durability and basic corrosion resistance for workshop environments. What is the arm reach and how heavy is the unit? The arm reach is 180 mm and the unit weight is 1.32 kg, combining extended reach with a compact, easy-to-handle form factor. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
180x255mm Swivel Rotary Precision Worktable 45° Tilt, 10 Kg Load Capacity - Vertex
Robust FC25 cast-iron construction combined with a 45° swivelling table top provides stable, versatile fixturing for precise machining and measurement. The compact 180 x 255 mm work surface and a rated load of 10 kg make this clamping table especially suited to small components and inspection tasks; order directly via Metav Werkzeuge or consult their specialists for application support. VP-250 Clamping table (45° swivel) — Vertex, 180 x 255 mm work surface A VP-250 clamping table engineered for accurate fixturing and angled set-ups in workshop and inspection environments. Swivelling table top 45° for angled clamping Compact 180 x 255 mm work surface Cast iron FC25 body for stable mounting Rated load 10 kg with 28.7 kg base weight Increased accuracy through mass and material The substantial construction, made from FC25 cast iron and weighing 28.7 kg, increases mass at the fixture so that cutting or measuring forces are absorbed rather than transferred to the part. This inherent vibration damping improves repeatability and reduces surface defects, which in turn lowers scrap rates and rework. For small-batch production and precision inspection, the greater stability delivered by the heavy base translates directly into measurable gains in precision and consistent part quality. Faster angled set-ups and reduced processing time A swivelling top that locks at 45° enables angled milling, drilling and inspection without repeated reclamping or auxiliary fixtures. The 180 x 255 mm work surface allows secure mounting of small jigs and components while preserving visibility for measurement tasks. By reducing the number of intermediate repositions and simplifying workholding, the overall workflow benefits from reduced set-up time and increased throughput, helping workshops maintain steady production rhythms. Practical dimensions and reliable load support With a nominal height of 136 mm and a rated load of 10 kg, the unit suits bench-mounted installations and integrates easily into existing inspection setups. The combination of compact footprint and robust load capacity supports a wide range of small components while keeping the clamping table accessible for manual adjustment and measuring tools. Built by a well-established manufacturer, this workholding solution is intended for day-to-day use and long-term reliability in demanding shop-floor conditions. For reliable angled fixturing select the Vertex VP-250 clamping table and contact Metav Werkzeuge for tailored application advice — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitability for specific tasks Technical data Article number: VP-250 GTIN: 4061905093777 Manufacturer: Vertex ECLASS: 21020702 Core specifications Weight: 28.7 kg Height: 136 mm Work surface: 180 x 255 mm Maximum load: 10 kg Materials & special features Material: FC25 (cast iron) Swivelling table top: 45° Messtisch: 180 x 255 mm SKU: VP-250 FAQ What is the maximum load capacity? The VP-250 clamping table by Vertex is rated for a maximum load of 10 kg, suitable for small components and inspection fixtures. Can the table be set to an angle for milling or drilling? Yes, the VP-250 features a swivelling top that locks at 45°, enabling angled machining and measurement without additional fixtures. What are the top dimensions suitable for workpieces? The work surface measures 180 x 255 mm, providing space for small jigs, gauges and components commonly used in inspection and light machining. What material is the clamping table made from and why does it matter? The table is made from FC25 cast iron; this material offers mass and damping that reduce vibration during machining, improving repeatability and surface finish. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
180x290mm Rotary Tilting Worktable With 16mm T-Slot, Height 206mm - Vertex
Take advantage of the combination of a rotating base, compact 180 x 290 mm table and a secure T-slot 16 mm for reliable fixture flexibility in medium‑duty machining. Order the clamping table directly via Metav Werkzeuge or consult the team for application advice. VP-250S Clamping Table – rotating base, swivel indexing by Vertex The VP-250S is a compact clamping table with a rotating base and swivel indexing, designed for precise positioning and flexible fixturing in machine shops and toolrooms Robust rotating base with swivel function Table surface 180 x 290 mm T-slot 16 mm for secure fixture Solid mass: 36 kg adds stability Greater positional accuracy for complex setups The combination of a rotating base and swivel indexing provides a clear benefit for angular machining tasks: faster alignment and repeatable positioning reduce setup time and minimise rework. The compact 180 x 290 mm table offers a stable work area for fixtures and small components while keeping the machine envelope efficient. For shops that process varied components, the ability to index the workpiece precisely translates into improved cycle consistency and measurable gains in throughput. The rotating mechanism is engineered for controlled movement, supporting accurate angular adjustments rather than coarse alignment. Secure clamping and reduced vibration for finer finishing Equipped with a T-slot 16 mm, this clamping table enables standard clamps and T‑nuts to be fitted quickly, turning fixture changes into an efficient, repeatable routine. The substantial mass—36 kg—acts as a vibration dampener, improving surface finish and dimensional stability during cutting or grinding operations. For applications where chatter and deflection compromise results, the combination of secure fixturing and inert mass helps maintain tool life and part quality. The engineered interface between table and fixture ensures that clamping forces are transferred consistently into the workholding system. Designed for straightforward shop integration and traceability The VP‑250S is classified under eClass 21020702, making specification and procurement straightforward within industrial catalogues. Its compact footprint and clear identification (SKU: VP‑250S, GTIN: 4061905085024) support efficient inventory handling and shop-floor organisation. Built by Vertex, the unit aligns with standard clamping practices so that existing clamps and tooling remain compatible. This predictability reduces the learning curve for operators and supports a reliable production flow for maintenance, small batch work and prototyping. For stable and accurate fixturing solutions from Vertex, contact Metav Werkzeuge to discuss the VP-250S clamping table and receive tailored application guidance — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: VP-250S GTIN: 4061905085024 eClass: 21020702 Manufacturer: Vertex Data Table surface: 180 x 290 mm Height: 206 mm Weight: 36 kg T-slot: 16 mm Special features Rotating base with swivel indexing Clamping table for fixture use Compact footprint for machine integration FAQ What are the dimensions of the table surface? The table surface measures 180 x 290 mm on the VP-250S clamping table. Does the unit allow angular adjustment? Yes. The VP-250S features a rotating base with a swivel mechanism for indexed angular positioning. Which T-slot size is available for fixturing? The clamping table is fitted with a T-slot 16 mm for standard T-nuts and clamps. What is the overall height and weight? Height is 206 mm and weight is 36 kg for the VP-250S. How can the product be identified for ordering? Identification: SKU VP-250S, GTIN 4061905085024, manufacturer Vertex Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
180° 11,000 N Vertical Clamp With Vertical Foot, Blackened Finish - Kukamet
Combine a 11,000 N clamping capacity with a compact 1.6 kg body and vertical-foot mounting for consistently secure workholding. Order the vertical clamp directly via Metav Werkzeuge or consult our specialists for application advice. Kukamet Vertical clamp 232-6 — 11,000 N clamping force, vertical-foot mount The Vertical clamp 232-6 is a compact vertical-foot workholding device for secure clamping in fixtures, jigs and repeatable machining setups. 11,000 N clamping force Black oxide finish Vertical-foot mounting 180° lever angle Consistent heavy-duty clamping for machining reliability A high clamping capacity of 11,000 N delivers firm, vibration-resistant hold that reduces part movement during cutting and finishing operations. The mechanism converts lever action into stable downward force, ensuring repeatable results and minimised rework. For production environments where cycle-to-cycle accuracy matters, this performance characteristic supports tighter tolerances and improved throughput without complex setup changes. Space-saving design that integrates into jigs and fixtures The compact construction and vertical-foot mounting enable simple integration into existing tooling plates and custom fixtures. At 1.6 kg, the unit is lightweight enough for retrofitting yet robust in function, permitting fast installation and reliable positioning. The 180° lever angle offers a full open-to-closed stroke suitable for constrained spaces, allowing effective handling where horizontal clamps cannot be used. Corrosion-resistant finish and dependable supply chain A black oxide finish provides abrasion resistance and a uniform appearance while helping to limit surface corrosion in workshop environments. Sourced from Kukamet and distributed through Metav Werkzeuge, the clamp benefits from consistent quality control and European warehousing that supports reliable restocking. This combination reduces the risk of supply interruptions and simplifies procurement for production and maintenance planning. Contact Metav Werkzeuge for application guidance and stock availability of the Kukamet Vertical clamp 232-6 — our team in Emmerich provides expert advice and dependable delivery. Technical data SKU: 232-6 GTIN: 8680731504385 Weight: 1.6 kg Facts Max clamping force: 11,000 N Angle: 180° eClass: 21041717 ETIM: EC011973 Special features Material: black oxide finish Mounting type: vertical foot Category: clamps (spanner) Brand: Kukamet FAQ What is the maximum clamping force of this clamp? The Kukamet vertical clamp 232-6 provides a maximum clamping force of 11,000 N for heavy-duty workholding. How is the clamp mounted to a fixture? Mounting is via a vertical foot; the design is intended for direct attachment to plates and jigs using the base foot. Is the surface corrosion-resistant? Yes, the clamp has a black oxide finish that improves abrasion resistance and offers basic protection against surface corrosion. Can this clamp be used in tight spaces? The 180° lever angle and compact body make the unit suitable for installations with limited horizontal clearance. What is the weight and how does that affect installation? The unit weighs 1.6 kg, enabling straightforward handling and retrofit into existing fixtures without heavy lifting equipment. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
180° Vertical Clamp 1.5 kN Closing Force, 5 kN Holding Force, Blackened Steel - Kukamet
Efficient, reliable workholding through a combination of 1,500 N clamping thrust and 5,000 N holding capacity, delivered in a compact vertical-foot design that simplifies fixture mounting; order the Kukamet vertical clamp directly via Metav Werkzeuge or consult our advisors for integration support. Vertikalspanner 224 — Vertical lever clamp with 1,500 N clamping force (Kukamet) The Vertikalspanner 224 is a vertical lever clamp engineered for secure fixturing and quick-action locking in production jigs and fixture plates Holding force up to 5,000 N Clamping force 1,500 N Vertical foot mounting for secure fixing 180° swivel lever, blackened finish Predictable clamping performance for consistent results The device provides clearly defined load values: 5,000 N holding force and 1,500 N clamping force, which allow planners to calculate retention and active engagement separately. The holding figure indicates the static retention capacity when the clamp is locked, while the clamping thrust is the force applied during actuation. This separation supports more accurate fixture design and reduces the risk of workpiece movement during machining, helping to maintain repeatable tolerances across batch runs. Compact mounting that saves space on the fixture plate A vertical foot mounting keeps the unit close to the base, enabling direct attachment to plates and blocks without bulky adapters. At 1.12 kg, the clamp balances low mass and serviceable robustness, making it suitable where compactness and predictable mass distribution matter. The blackened finish provides a uniform surface treatment that helps reduce glare in inspection areas, while the 180° lever travel offers flexible positioning to suit confined layouts and ergonomic loading. Fast, simple operation to accelerate set-up times The clamp follows a lever-actuated mechanism that converts manual input into a repeatable locking action; this lever clamp principle supports quick part changes and consistent engagement force. The quick-action characteristic of the mechanism shortens changeover intervals and simplifies operator workflows in assembly or short-run machining operations. Routine upkeep is straightforward: periodic light lubrication and visual checks at pivot points sustain reliable function and long service life. Designed for fixture integration and traceable procurement Produced by Kukamet, the unit listed under SKU 224-4 is intended for industrial and workshop fixtures where repeatability and a compact footprint are priorities. Traceability is assisted by GTIN 8680731504651, which supports stock control and procurement processes. As a medium-duty workholding element, the clamp complements modular fixturing systems and can be specified where reliable, repeatable clamping is required. Contact Metav Werkzeuge to discuss specification matching and procurement of the Kukamet vertical clamp 224-4 from our Emmerich stock for rapid integration into production fixtures Technical data SKU: 224-4 GTIN: 8680731504651 eClass: 21041717 ETIM: EC011973 Key figures Max clamping force: 1,500 N Max holding force: 5,000 N Angle: 180° Weight: 1.12 kg Features Vertical foot mounting Blackened finish Lever clamp design Category: Clamp FAQ What is the difference between the clamping and holding figures? The clamping figure refers to the active thrust during engagement (1,500 N), while the holding figure indicates static retention after locking (5,000 N) for the Kukamet Vertikalspanner 224-4. Can the clamp be mounted directly to a fixture plate? Yes — the vertical foot mounting is intended for direct attachment to plates or fixture blocks, allowing straightforward integration of the Kukamet vertical clamp 224-4. How much lever travel is available for positioning? The lever provides 180° travel, offering flexible positioning to accommodate part loading and access in confined arrangements. Is maintenance complicated for this clamp? Maintenance is minimal; the Vertikalspanner 224 benefits from light lubrication of pivot points and routine inspection to maintain reliable, repeatable operation. Which applications are typical for this clamp model? The clamp is suited to production jigs, assembly fixtures and medium-duty machining fixturing where compact, repeatable clamping is required; refer to SKU 224-4 for procurement and stock details. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
180° Vertical Clamp 11,000 N Clamping Force, Blackened Finish 1.82kg - Kukamet
Take advantage of the combination of a vertical foot for stable mounting, 11,000 N maximum clamping force and a compact 1.82 kg body to streamline fixture setup and improve repeatability on the shop floor. Order the Kukamet 222 vertical clamp directly via Metav Werkzeuge or consult our specialists for application advice. Kukamet 222 Vertical clamp – Vertical mounting, 11 kN clamping force A Kukamet 222 vertical clamp for secure, repeatable workpiece fastening in workshop and light industrial fixturing. Vertical foot for stable mounting 11 kN maximum clamping force 180° lever travel for flexible positioning Blackened (brunished) corrosion-resistant finish Consistent high clamping force for reliable production The vertical clamp delivers a measured 11,000 N clamping capacity that supports repetitive clamping tasks with consistent pressure. Built as a lever clamp, the mechanism converts simple manual action into reliable holding force, reducing the need for frequent readjustment. The compact mass of 1.82 kg combines rigidity with easy handling during fixture assembly. For production environments where cycle stability matters, the design reduces set-up variance and helps maintain dimensional control of parts without adding unnecessary bulk to the jig or fixture. Space-efficient mounting with flexible positioning Designed for a vertical foot fitment, the unit installs directly to machine tables or fixture plates to save horizontal space and keep adjacent tooling accessible. The 180° lever travel allows the clamping arm to be positioned clear of the workpiece when loading and returned into place for secure holding, which shortens handling time between operations. The combination of vertical mounting and full lever travel is particularly effective in clustered fixture assemblies where access and clearance are limited, enabling compact layouts without compromising ergonomics or safety. Durable surface and straightforward integration The external surface has a blackened (brunished) finish that provides basic corrosion resistance and a professional, low-reflective appearance ideal for workshop conditions. The material and finish support regular use and simplify maintenance routines. As a lever-operated clamping device, it integrates with standard fixture components and can be paired with locating pins or supports for repeatable part datum control. The construction suits general-purpose clamping in metalworking and fabrication jigs where mechanical simplicity and repeatable performance are priorities. For secure, high-force fixturing choose the Kukamet 222 and contact Metav Werkzeuge GmbH at info@metav-werkzeuge.com or +49 2822 7131930 to discuss delivery and application fitment Technical data Article number: 222-6 GTIN: 8680731504392 ECLASS: 21041717 ETIM: EC011973 Facts Max clamping force: 11,000 N Weight: 1.82 kg Lever angle: 180° Special features Mounting: vertical foot Finish: blackened (brunished) Type: vertical lever clamp Brand: Kukamet Intended use: clamping/fixture applications FAQ What maximum force does the clamp provide? The Kukamet 222 vertical clamp delivers up to 11,000 N of clamping force for secure workpiece retention in fixture and jig applications. How is the clamp mounted to a fixture plate? Mounting is by a vertical foot arrangement; the vertical foot secures the clamp to tables or plates for space-saving installation. Is the surface protected against corrosion? The unit is supplied with a blackened (brunished) finish, which offers basic corrosion resistance suited to workshop environments. Can the lever be positioned out of the way for loading? Yes, the lever travel is 180°, allowing the arm to clear the workpiece during loading and return to the clamping position for secure holding. Is the clamp suitable for heavy industrial fixtures? The design is intended for robust, repeatable clamping tasks; the 11 kN rating makes it suitable for many light to medium industrial fixturing needs. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
180° Vertical Clamp 2,500 N Closing Force, Vertical Base, Blackened Finish - Kukamet
Take advantage of a compact, high‑force clamping solution that combines 2,500 N holding power with a lightweight design and a vertical foot for secure fixture mounting. Order the clamp directly via Metav Werkzeuge or contact their consultants for application advice. Vertikalspanner 222 – Vertical clamp with 2,500 N clamping force (Kukamet) A Vertikalspanner 222 is a compact vertical toggle clamp for fixed fixturing and assembly tasks, optimised for repetitive positioning and stable holding in workshop environments 2,500 N clamping force for secure hold Vertical foot mounting for stable attachment Blackened finish for corrosion resistance 180° lever angle for versatile handling Reliable hold for repetitive production The 2,500 N rated clamping action delivers precise and repeatable force, making this vertical toggle clamp ideal where consistent fixture pressure is required. The mechanism converts lever travel into a controlled vertical clamp stroke, ensuring repeatable positioning and reduced cycle variation. Designed for use in production jigs and assembly stations, the device reduces setup time and supports uninterrupted workflow by maintaining component placement under load. Compact build with robust surface protection Manufactured with a blackened finish, the clamp resists surface wear and offers improved corrosion protection in everyday workshop conditions. The compact construction and 0.24 kg mass enable easy integration into existing fixtures without significant added weight. A vertical foot mounting provides a secure attachment point on flat surfaces or fixture plates, while the 180° lever articulation allows installation in confined spaces and flexible access during clamping operations. Practical advantages in handling and installation The lever‑actuated design is straightforward to install and operate, supporting quick locking and unlocking during assembly cycles. The simple mechanical concept reduces maintenance intervals and simplifies replacement of worn components. By choosing a mechanically reliable clamp, shops benefit from lower downtime and predictable process behaviour—an advantage for batch work and serial assembly where throughput and consistency matter. Suitable applications and integration notes Engineered for clamping tasks in small to medium production setups, the unit suits fixture plates, jigs and assembly benches where vertical holding is required. The low mass and compact footprint allow implementation in multi‑station fixtures without compromising accessibility. Compatibility with standard fixturing practices means the clamp can be integrated alongside other holding elements for combined functionality and improved process stability. For tailored advice on integrating the Kukamet Vertikalspanner 222 into a production setup, contact Metav Werkzeuge in Emmerich for expert consultation at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: 222-2 GTIN: 8680731505917 Material: blackened finish Mounting: vertical foot Max. clamping force: 2,500 N Weight: 0.24 kg Angle: 180 eClass: 21041717 ETIM: EC011973 Facts Clamping force: 2,500 N Weight: 0.24 kg Angle: 180° GTIN: 8680731505917 SKU: 222-2 Special features Blackened (brüniert) finish Vertical foot mounting Lever‑type vertical clamp No additional special features listed Brand: Kukamet FAQ What is the maximum clamping force of the Vertikalspanner 222? The maximum clamping force is 2,500 N; the Kukamet Vertikalspanner 222 is specified for consistent vertical holding at that force. How is the clamp mounted? Mounting is via a vertical foot; the clamp is secured to flat fixture plates or benches using the foot as the primary attachment point. Is the surface treated for corrosion resistance? Yes—the unit has a blackened (brüniert) finish that offers improved surface protection under normal workshop conditions. Can the clamp be used in tight installation spaces? The compact form factor and 180° lever articulation make it suitable for installations with limited space where vertical clamping is required. What identifying information is available for ordering or inventory? Order or reference the item by SKU 222-2 or GTIN 8680731505917 for accurate identification. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
180° Vertical Clamp 2.5 kN Clamping Force, 6.5 kN Holding Force, Blackened Steel - Kukamet
Take advantage of a robust combination of secure holding and compact installation: the clamp delivers 2,500 N clamping force with a 6,500 N holding capacity, and its vertical foot mounting at 180° provides clear access for fixtures. Order the vertical clamp directly via Metav Werkzeuge or ask our consultants if needed. Vertikalspanner 224 – Vertical toggle clamp with 2,500 N clamp force and 6,500 N holding force (Kukamet) The Vertikalspanner 224 is a vertical toggle clamp engineered for reliable workholding in jigs and fixtures, offering a compact vertical-foot mount and a full 180° lever angle for flexible positioning. 2,500 N maximum clamping force 6,500 N maximum holding force Vertical foot mounting, 180° lever angle Blackened finish for corrosion resistance High clamping performance that reduces rework and stoppages The vertical toggle clamp is designed to deliver consistent clamping force and repeatable results, with a rated 2,500 N clamping capability and a 6,500 N holding capacity that together secure workpieces under machining and assembly loads. This combination reduces slippage and part movement, which in turn lowers scrap rates and shortens set-up times. The robust force ratings support efficient cycle times and provide a measurable improvement in process reliability for small-batch production and assembly operations. Built for everyday workshop use with low maintenance needs A durable construction and a blackened finish give the device resistance to workshop conditions, helping to limit visible wear and slow surface corrosion. The component’s mass of 2.1 kg strikes a balance between solidity and handling ease, allowing installation without excessive support structure while remaining durable under repeated actuation. The protective finish is intended to reduce maintenance intervals and keep the clamp operating smoothly in a variety of environments, contributing to predictable long-term performance. Space-saving mount and ergonomic lever geometry for fixture integration The clamp’s vertical foot mounting and 180° lever geometry permit installation where lateral space is restricted and provide clearance above the workpiece when the lever is released. That layout simplifies integration into existing jigs and tooling plates and supports ergonomic actuation in confined areas. The compact footprint and predictable toggle action make this clamp suitable for assembly lines, welding fixtures and testing jigs where access and repeatability are essential. Practical choice backed by dependable supply and application support Selecting this toggle clamp supports a rational upgrade of workshop tooling, focusing on measurable gains in process stability and throughput. Through Metav’s distribution and quality filtering in Emmerich, customers benefit from a consistent supply chain and application advice that helps match the clamp to the task. The device aligns with standard fixture practice and is a cost-effective way to raise clamp reliability while keeping integration straightforward. For integration advice or to secure supply of the Kukamet Vertikalspanner 224, contact Metav Werkzeuge for tailored guidance and ordering at info@metav-werkzeuge.com or call +49 2822 7131930 — Metav’s consultants can advise on mounting and compatibility with existing fixtures Technical data Article number: 224-6 GTIN: 8680731503487 Manufacturer: Kukamet Facts Clamping force: 2,500 N Holding force: 6,500 N Weight: 2.1 kg Lever angle: 180° Special features Mounting: vertical foot Finish: blackened (Schwarz brüniert) Category: vertical toggle clamp eClass: 21041717 ETIM: EC011973 FAQ What materials is this clamp suitable for? The clamp is a general-purpose toggle device; material suitability depends on fixture design rather than the clamp itself. The Vertikalspanner 224 provides high holding capacity and is commonly used with metals and engineered plastics in secure jigs. How is the clamp mounted and what clearance is required? Mounting is via a vertical foot that fixes to the fixture or baseplate; the 180° lever angle ensures that the handle clears the workpiece when released, simplifying installation in confined setups. Is the finish corrosion-resistant for shop environments? The blackened finish on this model offers protective surface treatment to resist staining and typical workshop humidity, helping to extend service intervals. Can the clamp be used for welding fixtures and assembly jigs? Yes — the device’s holding and clamping ratings make it suitable for welding and assembly applications where stable, repeatable positioning is required. What identification does the product carry for ordering? The unit is supplied under SKU 224-6 with GTIN 8680731503487, facilitating straightforward reordering and inventory tracking. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
180° Vertical Clamp 7000 N Max Force Blackened Finish 0.94 kg - Kukamet
Take advantage of a combination of high clamping force, compact design and easy integration for reliable fixture performance; the Kukamet Vertikalspanner 222 delivers consistent results in production and jig applications—order via Metav Werkzeuge or consult our specialists for adaptation to specific setups. Kukamet Vertikalspanner 222 – Vertical lever clamp with 7,000 N clamping force The Vertikalspanner 222 is a vertical clamp engineered for secure, repeatable clamping in jigs, fixtures and bench-mounted assemblies. Vertical mounting with upright foot 7,000 N maximum clamping force 180° handle travel for accessible operation Blackened finish for durable surface protection Secure, high-force clamping for stable machining and assembly With a rated 7,000 N clamping capacity, this vertical lever clamp provides a clearly defined holding performance that reduces workpiece movement during machining and assembly cycles. The stated clamping force describes the maximum axial force applied by the clamping element; selecting a clamp with a clearly specified force simplifies fixture design and helps to avoid under- or over-clamping. The compact mechanism is intended for integration into production jigs where predictable repeatability and short cycle times are required, supporting efficient throughput and reduced rework. Compact construction and resilient finish for longevity in workshops The device combines a low mass with a robust surface treatment: at 0.94 kg it is simple to position and handle during installation, while the blackened finish protects against light corrosion and wear in workshop environments. The modest weight reduces additional load on moving fixtures and makes retrofitting to existing plates or modular tooling straightforward. The surface treatment is intended to extend service life where parts are handled frequently and to maintain consistent appearance and function over many cycles. Accessible operation and flexible mounting for practical use A 180° handle travel gives clear open and closed positions and enables quick loading and unloading of components even where space is constrained. The upright foot mounting allows the clamp to be fixed vertically to base plates or fixture blocks, creating a low-profile arrangement that keeps the clamping arm clear of surrounding tooling. As a lever clamp, the mechanism converts handle movement into a reliable clamping action, offering tactile feedback on engagement and supporting rapid manual operation in assembly or inspection tasks. Practical choice for general clamping tasks in production and repair The unit is designed as a straightforward, robust clamp for standard industrial applications where a dependable holding force and simple installation are required. Supplied by Kukamet and distributed through Metav Werkzeuge, the component benefits from established supply logistics and documentation suitable for small-series production or workshop refurbishment. Selection of a clearly specified clamp such as this reduces design uncertainty in fixtures and contributes to more consistent process control on the shop floor. Contact Metav Werkzeuge for order placement or technical advice on integrating the Kukamet vertical clamp 222 into fixtures—email info@metav-werkzeuge.com or call +49 2822 7131930 for tailored guidance and fast dispatch from Emmerich. Technical data Article number: 222-4 Name: Vertikalspanner 222 Manufacturer: Kukamet EClass: 21041717 ETIM: EC011973 GTIN: 8680731504248 Facts Clamping force max: 7,000 N Weight: 0.94 kg Angle / handle travel: 180° Special features Finish: blackened (brüniert) Mounting: upright foot (vertical mounting) Type: lever clamp Special features: none FAQ What maximum clamping force does the clamp provide? The Kukamet Vertikalspanner 222 provides a maximum clamping force of 7,000 N, specified for design and fixture calculations. How is the clamp mounted in a fixture? Mounting is via an upright foot for vertical installation; the vertical foot enables secure fixing to base plates or fixture blocks. What does the 180° specification mean for operation? The 180° specification describes the handle travel between open and closed positions, allowing clear visual and tactile indication of clamp engagement. Is the surface treatment corrosion resistant? The clamp has a blackened surface treatment intended to improve resistance to light corrosion and wear in workshop conditions. Which category of clamp is this unit and where is it best used? This is a lever-type vertical clamp, suitable for jigs, fixtures and bench-mounted assemblies where repeatable manual clamping is required. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
180° Vertical Clamp Vertical Foot Mount 7000 N Press Force Blackened Steel - Kukamet
Vertically mounted design and 7,000 N clamping capacity ensure robust fixture security; combine high holding power, a compact footprint and a durable blackened finish for reliable production. Order the vertical clamp directly via Metav Werkzeuge or ask the consultants for application advice. Vertical clamp 232 — Vertical clamp with 7,000 N clamping force (Kukamet) Vertical clamp 232 is a compact vertical clamping unit designed for jigs and fixtures where strong, reliable holding and flexible positioning are required. Vertical clamp with vertical foot mounting Max clamping force 7,000 N Compact design, lightweight 0.83 kg 180° pivot angle for flexible positioning Secure holding that stabilises machining and assembly The high clamping force of 7,000 N provides a measurable increase in fixture stability compared with lower-capacity clamps. A reliably applied force reduces micro-movement during machining or assembly operations, translating into fewer rejects and more consistent part quality. In practice, clamping force denotes the maximum axial load the device sustains without slippage; this makes the unit particularly suitable for repetitive production tasks and robust manual fixtures. The result is improved process reliability while maintaining straightforward integration into existing setups. Compact footprint for denser fixture layouts and fast reconfiguration With a compact design and a weight of 0.83 kg, this vertical clamping unit allows more clamping points in a limited table area and keeps the overall fixture mass low. The vertical foot mounting enables direct attachment to uprights and baseplates without complex adapters, while the 180° pivot angle gives freedom to position the clamping arm where it best supports the workpiece. The combination of low weight and narrow construction helps reduce cycle times through simpler tooling arrangements and quicker changeovers, supporting efficient workshop workflows. Durable finish and straightforward mechanical integration Finished in a blackened finish, the unit resists surface corrosion and presents a professional appearance in the workshop environment while requiring minimal upkeep. The vertical mounting concept is compatible with common fixture plates and stands, enabling direct replacement of older clamping elements. The mechanism is built for repetitive operation and predictable behaviour, which aids process planning and fixture standardisation across multiple stations. For specific mounting instructions or to confirm compatibility with an existing jig, Metav Werkzeuge provides technical guidance and parts matching. Select the Kukamet vertical clamp 232 for dependable 7,000 N holding and compact fixture integration — contact Metav Werkzeuge in Emmerich for availability and tailored application advice via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 232-4 GTIN: 8680731504255 Manufacturer: Kukamet Core specifications Clamping force: 7,000 N Weight: 0.83 kg Pivot angle: 180° Mounting: vertical foot Finish: blackened Materials & features Blackened finish Vertical mounting foot Compact, lightweight design SKU: 232-4 FAQ What is the maximum clamping force of this unit? The vertical clamp 232 delivers a maximum clamping force of 7,000 N, providing firm and reliable holding for fixture and jig applications. How is the clamp mounted? Mounting is via a vertical foot, allowing direct attachment to fixture plates or uprights; the design supports straightforward mechanical integration. Is the unit lightweight enough for modular fixtures? Yes—the device weighs 0.83 kg, supporting modular and reconfigurable fixture layouts without adding excessive mass. Can the clamp be rotated to different positions? The clamp offers a 180° pivot angle, enabling flexible positioning of the clamping arm to suit various workpiece geometries. What finish does the clamp have and how does it hold up in workshop conditions? The clamp has a blackened finish, which improves surface durability and reduces corrosion risk under typical workshop conditions. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
180° Vertical Clamp With Vertical Base 2 500 N Clamping Force, Blackened - Kukamet
Take advantage of the combination of high holding force, compact weight and corrosion-resistant finish for safe fixture clamping in demanding workshop environments. Combine the 2500 N clamping capacity with vertical-foot mounting and a compact black blued finish to keep set-ups stable. Order the vertical clamp directly via Metav Werkzeuge or consult our advisers if needed. Vertical clamp 223 — Kukamet vertical clamp with 2500 N clamping force and black blued finish A vertical clamp 223 engineered for secure vertical mounting in jigs, fixtures and assembly stations, providing a compact solution for repeatable clamping tasks across production and repair workshops. 2500 N clamping force Vertical-foot mounting Black blued finish Compact weight 0.22 kg Consistent performance where repeatability matters The clamp delivers a clear technical advantage through its 2500 N maximum clamping force, which ensures reliable retention of parts during machining or assembly. Specified for vertical-foot mounting, the device integrates directly into workholding fixtures and baseplates, reducing setup complexity. The mechanical design provides steady holding power with minimal play, helping to maintain process repeatability and reduce scrap rates in batch production. Compatibility with common jig layouts makes it a practical choice for small-series and repair workshops. Space-saving design that eases handling and installation Weighing only 0.22 kg, the unit is intentionally light to simplify manual placement and repositioning on tooling plates without compromising stability. The compact dimensions and 180° swing or adjustment angle enable flexible orientation inside tight fixture arrangements. This balance of low mass and robust clamping capacity supports ergonomic handling for technicians while enabling quick changes between operations, which can improve throughput on manual and semi-automated lines. Durable finish for everyday workshop conditions The black blued finish provides an additional layer of protection against corrosion and surface wear, extending service life under typical shop-floor conditions. Materials and surface treatment make the clamp suitable for general mechanical environments where occasional coolant or humidity exposure occurs. The straightforward construction minimises maintenance requirements; periodic visual checks and routine lubrication of moving parts are usually sufficient to preserve function and accuracy over time. Practical integration and application notes Designed as a standard clamp element for fixtures and workholding assemblies, the product suits a broad range of applications from assembly jigs to holding small components for inspection. The simple geometry and vertical-foot mounting reduce the need for elaborate adapters; where bespoke mounting is required, standard plate machining suffices. The component’s measured characteristics support selection decisions when calculating fixture load capacities and determining clamping sequences in multi-station processes. For dependable, compact clamping from Kukamet, request the Vertical clamp 223 via Metav Werkzeuge or contact our Emmerich team for application advice and ordering guidance. Technical data Article number: 223-2 GTIN: 8680731502183 ECLASS: 21041717 ETIM: EC011973 Facts Maximum clamping force: 2500 N Weight: 0.22 kg Angle: 180° SKU: 223-2 Special features Mounting: vertical foot Finish: black blued Category: Clamp (Spanner) Manufacturer: Kukamet FAQ What is the maximum holding force of the clamp? The Kukamet vertical clamp 223 offers a maximum clamping force of 2500 N, suitable for secure retention in many fixture applications. How is the clamp mounted to a fixture? Mounting is via a vertical foot; the vertical-foot mounting design of the 223 allows direct installation on plates and bases used in jigs and fixtures. Is the finish resistant to workshop conditions? The black blued finish on the vertical clamp 223 provides enhanced corrosion resistance and everyday wear protection for standard workshop environments. Can the clamp be used in tight spaces? Yes, at only 0.22 kg and with a 180° adjustment angle, the clamp is designed for compact installations and flexible orientation within confined fixtures. Which applications suit this clamp best? The clamp is intended for use in jigs, fixtures and assembly stations where reliable, repeatable vertical clamping is required; it is well suited to small-series production and maintenance tasks. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
180° Vertical Clamp, 2,500 N Clamping Force, Blackened Finish - Kukamet
Compact and reliable clamping delivered: the combination of a 2,500 N clamping force, a 180° lever swing and a lightweight 0.2 kg body ensures secure, repeatable workholding in confined fixtures. Order directly via Metav Werkzeuge or ask our consultants for specification support. Kukamet Vertikalspanner 232 – Vertical lever clamp with 2,500 N clamping force The Vertikalspanner 232 is a compact vertical lever clamp designed for fast, secure clamping in jigs, fixtures and small assembly stations. Robust 2,500 N clamping force 180° lever swing for versatile positioning Vertical foot mounting for stable attachment Black oxide finish for corrosion resistance Compact clamping that keeps production moving This vertical lever clamp delivers a high clamping force in a compact package, making it suitable where space is limited but process reliability is essential. The combination of a firm 2,500 N holding capacity and a short, efficient lever reduces cycle times during manual and semi-automatic operations. The vertical foot mounting simplifies integration into fixtures and tooling plates, while the low mass of 0.2 kg minimises added load on moving jigs. For production planners and maintenance teams, this equates to fewer fixture redesigns and a predictable clamping performance that supports consistent part positioning. Smooth handling and versatile positioning for fixtures The clamp’s 180° lever swing enables flexible approach angles and clear access for loading and unloading components. The lever mechanism functions as a reliable toggle-style action, converting operator input into a stable clamping force with minimal adjustment. For applications that require quick cycle times, the design reduces operator fatigue and speeds repeatability. Engineers unfamiliar with toggle mechanics will find the principle straightforward: the lever locks the clamp in place, creating a secure mechanical advantage that maintains grip without continuous effort. Durable finish and construction for workshop environments Finished in a black oxide coating, the clamp resists corrosion and maintains appearance in workshop conditions. The surface treatment improves longevity where occasional coolant splash or humid storage might otherwise accelerate wear. Constructed for repetitive use, the component parts are dimensioned to suit jigs and light-duty fixtures common in metalworking and assembly shops. Where traceability matters, the clamp’s SKU and GTIN facilitate inventory management and procurement within existing systems. For purchase recommendations or to discuss integration of the Kukamet vertical lever clamp into existing tooling, contact Metav Werkzeuge for expert advice and fast, reliable supply from Emmerich: info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 232-2 GTIN: 8680731505955 ECLASS: 21041717 ETIM: EC011973 Core measurements Clamping force: 2,500 N Weight: 0.2 kg Lever angle: 180° Mounting type: vertical foot Materials & features Finish: black oxide Application: lever/ toggle clamping for fixtures Category: clamps Brand: Kukamet FAQ What clamping force does the clamp provide? The vertical clamp provides a clamping force of 2,500 N, suitable for light to medium workholding tasks in fixtures and jigs. How is the clamp mounted to a fixture? Mounting is via a vertical foot, enabling direct attachment to plates or jig surfaces for stable positioning. Is the finish resistant to workshop conditions? Yes, the black oxide finish offers improved corrosion resistance and is suited to general workshop environments. Can the clamp be used in automated fixtures? The compact design and toggle action make it appropriate for semi-automated or automated fixtures where the lever motion can be accommodated. What is the product SKU for ordering and inventory? The SKU is 232-2 and the GTIN is 8680731505955 for procurement systems. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
180° Vertical Clamp, Vertical Base, 2,500 N Thrust, Blackened Finish - Kukamet
Benefit from the combination of compact mass, reliable 2.5 kN clamping force and a corrosion-resistant black oxide finish for dependable, repeatable holding in light workshop and production fixtures. Order the clamp directly via Metav Werkzeuge or consult the specialists for application-specific advice. Vertical clamp 233 — Kukamet, 2.5 kN clamping force The Vertical clamp 233 is a compact vertical clamp with vertical-foot mounting, designed for secure, repeatable clamping in light-duty workshop and fixturing applications. 2.5 kN maximum clamping force Vertical-foot mounting for stable installation Black oxide finish for corrosion resistance Compact design at 0.2 kg for minimal load Reliable holding force for small fixtures The 2.5 kN maximum clamping capacity offers a clear technical advantage when consistent, medium-duty clamping is required. Specified clamping force is a measurable assurance of performance: the force rating explains how firmly components are held during assembly or light machining and provides a basis for fixture design. With a focus on predictable performance and repeatable clamping, the unit supports quality control by reducing part movement and rework in jigs and small production runs. Quick mounting and precise positioning for repeatable results Designed for a vertical foot mounting, this clamp integrates directly into benches and fixture plates with minimal adaptation. The mechanism allows a full 180° operating arc, enabling flexible lever positioning where space is restricted or multiple clamps must be arranged close together. The straightforward fixing method reduces setup time and supports consistent part indexing in repetitive processes, which improves throughput and reduces layout errors during batch production. Corrosion-protected finish and light overall mass A black oxide finish gives surface protection while keeping the visual appearance discreet in manufacturing environments. The low mass of 0.2 kg reduces the load on fixture assemblies and minimises inertia in dynamic setups, aiding fast handling and lowering the mechanical strain on substructures. These physical characteristics combine to extend life in regular use and simplify handling when reconfiguring fixtures or relocating jigs between workstations. Where this clamp adds the most value The lever-style construction and compact footprint make the clamp particularly suitable for assembly jigs, inspection fixtures, welding aids and light machining operations where space and repeatability matter. The lever-action provides a tactile and audible confirmation of clamping, useful on busy production floors for quick visual checks. The compact design supports modular fixturing philosophies and is especially beneficial where many clamping points must be integrated without excessive bulk. Contact Metav Werkzeuge to confirm technical suitability and to secure the Kukamet Vertical clamp 233 from our Emmerich stock, including application advice and order processing Technical Data SKU: 233-2 Manufacturer: Kukamet GTIN: 8680731505962 Facts Clamping force max: 2,500 N Weight: 0.2 kg Angle: 180° eCl@ss: 21041717 ETIM: EC011973 Special features Mounting: vertical foot Finish: black oxide finish Typical application: lever clamp / spanner Catalog page: 232-233-katalogseite.pdf FAQ What clamping force can be expected from this clamp? The clamp achieves a maximum clamping force of 2,500 N; the Kukamet Vertical clamp 233 is specified for reliable medium-duty holding in fixtures and light machining tasks. How is the clamp mounted to a fixture plate? Mounting is via a vertical foot, which secures the clamp directly to benches or fixture plates for stable installation and straightforward alignment. Is the finish suitable for industrial environments? Yes, the black oxide finish provides corrosion resistance appropriate for workshop conditions while maintaining a low-maintenance surface. Will the clamp fit into compact fixturing arrangements? The compact mass (0.2 kg) and 180° operating arc make this clamp well suited to tight layouts and modular fixtures where space and repeatability are priorities. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
181mm Push Rod Clamp 15 With Automatic Jaw Adjustment 1100N - BESSEY
The BESSEY push-rod clamp combines automatic width adjustment with a reliable 1,100 N clamping capacity, offering fast set-up and secure holding in compact workshop settings; order the clamp directly via Metav Werkzeuge or consult the specialists for application support. BESSEY Push-rod Clamp, Size 15 — automatic width adjustment, 1,100 N The BESSEY Push-rod Clamp, Size 15 is a compact clamping device for workshop and maintenance tasks, featuring automatic clamping-width adjustment for fast, repeatable positioning. Automatic clamping-width adjustment Max. clamping force 1,100 N Compact 181 × 42 × 32 mm footprint Size 15 for light workshop applications Faster set-up through automatic width adjustment The automatic width adjustment shortens set-up time by adapting the clamping head to the workpiece without manual reconfiguration. This mechanism reduces handling steps and minimises fixture changes, enabling quick setup across varying part sizes. The simple adjustment principle is particularly useful where repeated repositioning would otherwise slow down production or maintenance routines. The reduced set-up overhead supports a steadier workflow and fewer interruptions on the shop floor. Consistent holding force for reliable results A rated 1,100 N maximum clamping force ensures a stable grip for many routine clamping operations, offering consistent pressure across repeated cycles. Expressed in newtons, this figure describes the mechanical pushing capability of the device and is a practical reference when comparing clamps for comparable tasks. The even force distribution provided by the mechanism helps to maintain part alignment during assembly or gluing operations, reducing the risk of slippage and rework. Compact design for confined workspaces With compact dimensions of 181 × 42 × 32 mm, the clamp is designed to fit tight fixtures and limited bench space without compromising accessibility. Its modest footprint makes it straightforward to incorporate into existing jigs or temporary setups. The size 15 designation denotes the device’s suitability for lighter-duty applications where space is at a premium, while still providing a professional-grade clamping solution for routine workshop and maintenance tasks. Seamless procurement and dependable supply chain Integration of this clamp into an assembly or maintenance toolkit is supported by Metav’s focused distribution and technical advisory from Emmerich. The product’s straightforward specification and single-item packaging unit simplify purchasing and storage decisions. As a partner for precision tools, Metav combines wide selection with hands-on advice, enabling informed choices and dependable supply for workshop managers and procurement teams. The combination of practical design and distribution reliability supports efficient workshop operation without unnecessary complexity. For procurement or application advice on the BESSEY Push-rod Clamp, Size 15, contact Metav Werkzeuge in Emmerich: info@metav-werkzeuge.com | +49 2822 7131930 Technical data SKU: 4000831138NW Article: BESSEY Push-rod Clamp, Size 15 Manufacturer: BESSEY Facts Max. clamping force: 1,100 N Length: 181 mm Width: 42 mm Height: 32 mm Special features Automatic clamping-width adjustment Size: 15 Product type: Push-rod clamp Packaging unit: 1 FAQ What is the maximum clamping force of the clamp? The clamp offers a maximum clamping force of 1,100 N as specified for the BESSEY Push-rod Clamp, Size 15 (SKU 4000831138NW). What are the external dimensions of the clamp? The device measures 181 mm in length, 42 mm in width and 32 mm in height. Does the clamping width adjust manually or automatically? The clamping width is adjusted automatically; the mechanism adapts to different workpiece sizes for quicker set-up. How is the product supplied? The clamp is supplied as a single unit (packaging unit: 1). Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
185mm Milling Vice With Extra-Wide Jaw Opening, 1500 Kgf Clamp Force, 0.02mm Accuracy - Vertex
Benefit from the combination of reliable 1,500 kgf clamping force, an extra-wide 0–185 mm opening and 0.02 mm repeatability to keep milling operations consistent and reduce rework. Order the Vertex VJ-400 milling vice directly via Metav Werkzeuge or ask our consultants if needed. Vertex VJ-400 milling vice — extra-wide opening and high clamping force The Vertex VJ-400 milling vice is a mechanical workholding solution designed for demanding milling and machining tasks that require wide jaw capacity and steady clamping. Extra-wide 0–185 mm opening 1,500 kgf clamping force 0.02 mm repeatability accuracy Robust 25 kg construction Consistent clamping for precision machining The vice combines a wide jaw span with measured repeatability to maintain part position throughout machining cycles. With a documented 0.02 mm accuracy and a 1,500 kgf clamping capability, the unit reduces the risk of workpiece shift and minimises corrective machining. This level of stability supports predictable tool paths and contributes to lower scrap rates in series production, offering a tangible productivity advantage for precision-oriented workshops. Faster setup and handling of larger parts An extra-wide opening of 0–185 mm means fewer fixture changes and simpler handling of bulky components. The vice’s mass, approximately 25 kg, provides inherent stability that dampens vibration during heavy cuts, shortening cycle times and reducing the need for frequent re-clamping. As a result, machining sequences can be arranged more efficiently, improving throughput on both manual and CNC milling machines without complex fixturing. Mechanical simplicity for dependable uptime Built as a mechanical design, the vice avoids the failure modes associated with electronic actuation and keeps maintenance straightforward. Fewer moving subsystems translates into predictable service intervals and easy inspection routines, which supports continuous operation in a busy workshop. The straightforward construction also simplifies routine checks and keeps total cost of ownership low over the product’s service life. Compact footprint that fits workshop workflows With external dimensions of 386 x 270 x 135 mm, the vice offers a compact profile that still accepts larger workpieces thanks to its wide opening. The combination of a modest footprint and a generous clamping range makes it suitable as a standard workholding device on many milling tables and benches, improving adaptability across jobs without dedicating extra machine space. Contact Metav Werkzeuge in Emmerich for tailored technical advice and to discuss the Vertex VJ-400 milling vice — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data SKU: VJ-400 Manufacturer: Vertex GTIN: 4061905084140 ECLASS: 21020601 ETIM: EC002173 Facts Opening: 0–185 mm Clamping force: 1,500 kgf Accuracy: 0.02 mm Weight: 25 kg Dimensions: 386 x 270 x 135 mm Special features Milling vice with extra-large opening range Mechanical type Robust construction suitable for milling operations FAQ What opening range does the vice offer? The Vertex VJ-400 milling vice provides an opening range of 0–185 mm, allowing secure clamping of larger workpieces without complex fixtures. How much clamping force is available? The Vertex VJ-400 delivers a clamping force of 1,500 kgf, which supports heavy-duty milling cuts and stable workholding. Is the vice precise enough for fine machining tasks? Yes. The vice is specified with a repeatability of 0.02 mm, making the VJ-400 suitable for many precision milling applications where positional stability is required. What are the dimensions and weight of the unit? The vice measures 386 x 270 x 135 mm and weighs approximately 25 kg, combining a compact footprint with substantial mass for stability. Which machines is this vice intended for? The vice is designed for milling machines and general machining tables where mechanical workholding with a wide opening and high clamping force is needed. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
187mm Assembly Aid Horizontal And Vertical SK-50x1 / SK-40x1 Adapter Holder, 238x305mm Foot - Vertex
Benefit from a stable, compact mounting solution that pairs a 238 x 305 mm base with a dedicated SK‑50 spindle interface, delivering reliable stability during horizontal and vertical set-ups; the 187 mm working height and 25 kg mass provide a secure platform for precision tasks. Order the VTD-7 assembly aid directly via Metav Werkzeuge or ask our consultants if needed. VTD-7 assembly aid — SK‑50 compatibility with SK‑40 adapter holder, robust 238 x 305 mm base The VTD-7 assembly aid is a compact mounting device for horizontal and vertical set-ups, designed to accept SK‑50 spindles and accommodate SK‑40 via an adapter holder Compatible with SK‑50 and SK‑40 adapter Stable 238 x 305 mm mounting base Vertical and horizontal operation possible Compact 187 mm working height Secure mounting for repeatable accuracy A solid footprint is the foundation of repeatable results. The prominent 238 x 305 mm base and overall mass of 25 kg create a low centre of gravity, reducing vibration and movement during assembly operations. This stability supports precision alignment tasks and helps to maintain concentricity when mounting spindles or tooling. For workshops that demand consistent outcomes, the robust support reduces rework and inspection time, improving throughput without complex fixtures. Versatile taper support that speeds changeovers Built around the standard SK‑50 interface, the device includes a taper configuration listed as SK‑50x1 and an SK‑40x1 adapter holder, enabling flexible use of tooling and spindles. The taper solution simplifies mechanical transitions between different machine tapers and shortens set-up procedures. By standardising on these common spindle tapers, the assembly device streamlines workplace organisation and reduces the number of bespoke adaptors required, which supports faster machine availability and lower changeover costs. Orientation options that suit workshop workflows Designed for both horizontal and vertical operation, the unit adapts to varying assembly needs—whether checking runout on a spindle, completing end-face operations, or performing bench-based alignment. The compact 187 mm height makes it suitable for workbenches and granite tables where space is at a premium, while the proven geometry ensures the mounted tool remains clamped and accessible. This flexibility supports efficient sequencing of tasks and allows the same device to be used across multiple stations in the shop. Simple integration and clear specifications The device uses established taper standards and clear, measurable dimensions to aid specification and purchasing choices. The SK‑50 acceptance and the provision for an SK‑40 adapter are industry-standard terms; for users less familiar with tapers, the SK designation denotes the spindle taper family and the numeric suffix identifies the standard size. The compact footprint and defined height make planning for fixturing straightforward and reduce uncertainty during machine set-up. Supplied through Metav Werkzeuge, the unit is backed by a quality-aware supply chain that serves European workshops with consistent availability and documentation. Contact Metav Werkzeuge in Emmerich for tailored advice, stock information or to discuss suitable adapters and delivery options — eMail: info@metav-werkzeuge.com • Tel: +49 2822 7131930 • WhatsApp: +49 170 2837271 Technical Data SKU: VTD-7 GTIN: 4061905096266 ECLASS: 21029203 Name: Assembly aid (Montagehilfe) Core data Height: 187 mm Base: 238 x 305 mm Weight: 25 kg Special features Mounting acceptance: SK‑50 Taper: SK‑50x1 and SK‑40x1 (adapter holder) Orientation: horizontal and vertical FAQ Which spindle tapers fit the assembly aid? The VTD-7 accepts the SK‑50 taper and includes an SK‑40x1 adapter holder to accommodate SK‑40 tooling where required. Can the device be used vertically and horizontally? Yes. The unit is specified for both horizontal and vertical operation to match different workflow requirements. What are the physical dimensions and weight? The mounting base measures 238 x 305 mm, the working height is 187 mm, and the mass is 25 kg, which together provide a stable support platform. Is the material of the unit specified? The product data does not specify the construction material for the assembly aid; please contact Metav Werkzeuge for material details if required. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
187mm Assembly Aid Horizontal And Vertical SK-50x2 Adapter Holder, 238x305mm Base - Vertex
The compact design, built for both horizontal and vertical set-ups, combines stable support with straightforward compatibility via an SK-50 taper, making it a practical choice for precise mounting tasks; order directly through Metav Werkzeuge or consult our experts for tailored advice. VTD-6 Mounting Aid — SK-50 taper, horizontal & vertical application (Vertex) The VTD-6 mounting aid for SK-50 spindles, designed to support horizontal and vertical assembly and machining tasks in workshop and production environments. SK-50 taper compatibility for direct mounting Stable 238 x 305 mm base for secure support Adapter holder SK-50x2 for flexible use Robust construction with 24 kg mass for vibration damping Faster, more reliable set-ups through taper compatibility The presence of a SK-50 taper and an adapter holder SK-50x2 enables quick, repeatable mounting directly into compatible spindles and fixtures. This reduces changeover time and improves process throughput by removing the need for complex intermediary fixtures. The taper interface is a widely accepted machine standard, ensuring broad machine compatibility and straightforward integration into existing tool change procedures. As a result, set-up routines become more predictable and measurable, supporting improved workflow planning. Secure support and vibration damping for accurate results A solid base (238 x 305 mm) combined with a mass of 24 kg provides inherent stability during assembly or light machining operations. The substantial weight contributes to vibration damping, helping to preserve positional accuracy while work is carried out in both horizontal and vertical orientations. For operations that demand consistent alignment, this stability translates into fewer rework cycles and more consistent end results, improving overall production efficiency and part quality. Versatile orientation and compact footprint for workshop use Designed for both horizontal and vertical use, the device accommodates a range of mounting scenarios without requiring a large footprint. With a vertical height of 187 mm, the aid fits into crowded machine bays and can be integrated into modular workstations. The combination of compact dimensions and flexible orientation supports quicker fixturing decisions and allows workshops to optimise floor space while maintaining the capability to address diverse assembly tasks. The product code VTD-6 denotes the model variant suited to standard SK-50 tooling systems. For SK-50 compatibility and dependable mounting performance, contact Metav Werkzeuge to discuss the VTD-6 and arrange supply or technical consultation from our Emmerich facility Technical data SKU: VTD-6 GTIN: 4061905096259 Manufacturer: Vertex Facts Weight: 24 kg Height: 187 mm Base footprint: 238 x 305 mm Eclass: 21029203 Special features Spindle taper: SK-50 Adapter holder: SK-50x2 Orientation: horizontal and vertical Intended application: mounting/assembly aid FAQ What machines is this mounting aid compatible with? The mounting aid is compatible with machines and fixtures that accept an SK-50 taper; the VTD-6 is intended for integration with standard SK-50 toolholding systems. Can the device be used both horizontally and vertically? Yes, the VTD-6 supports both horizontal and vertical orientations for flexible assembly and light machining set-ups. How does the weight affect performance? At 24 kg, the mass increases stability and contributes to vibration damping, which helps maintain positional accuracy during operations. Is an adapter included for different spindle interfaces? The unit features an adapter holder SK-50x2, which facilitates compatibility with related toolholders and simplifies transitions. What are the footprint and height dimensions for workshop planning? The base measures 238 x 305 mm and the vertical height is 187 mm, enabling integration into compact workstations. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
187mm Assembly Aid Horizontal And Vertical, BT-#40x2 Adapter Holder - Vertex
Benefit from the combination of BT-40 compatibility and a compact, stable base to speed up assembly tasks in both horizontal and vertical setups; the robust footprint and precise taper interface support reliable machine integration. Order the assembly aid directly via Metav Werkzeuge or ask our consultants if needed. VTD-1 Assembly Aid by Vertex — BT-40 Compatibility, Horizontal & Vertical Mounting The VTD-1 is an assembly aid for horizontal and vertical mounting, designed to integrate with BT-40 tooling and to support precise positioning tasks in workshop and machine-tool environments. BT-40 compatibility for fast integration Supports horizontal and vertical mounting Stable base 238 x 305 mm footprint Solid construction, weight 22.4 kg Faster set-ups through dual-orientation support The assembly aid enables both horizontal and vertical operation, reducing the need for multiple fixtures and shortening changeover times in mixed production runs. By allowing orientation changes without replacing the support, the unit simplifies workflow sequencing and minimises handling steps, which benefits production environments that require frequent repositioning or staged assembly. The design focuses on operational efficiency and repeatability rather than decorative aspects. Compact footprint with robust stability for secure positioning A stable base of 238 x 305 mm and a nominal height of 187 mm deliver a compact but sturdy platform that fits bench space or machine tables where space is at a premium. The overall weight of 22.4 kg contributes to low susceptibility to movement during alignment tasks, providing a dependable support for positioning operations. Clear dimensional data helps planners assess integration without ambiguity and supports ergonomic placement on shop floors. Seamless integration with BT-40 spindles and adapter holder The taper interface is configured for BT-40 tooling and includes an adapter holder arrangement for straightforward connection to compatible toolholders. This standard interface ensures the unit aligns with common spindle and holder systems, enabling straightforward transfer of tools and fixtures between machines and the aid. The mechanical simplicity of the taper connection supports repeatable seating and rapid reconfiguration, which is advantageous for shops seeking consistent alignment and reduced set-up times. Contact Metav Werkzeuge in Emmerich for tailored advice on Vertex BT-40 assembly aids and to arrange procurement or technical consultation Technical Data Article number: VTD-1 GTIN: 4061905084904 ECLASS: 21029203 Facts Height: 187 mm Foot: 238 x 305 mm Weight: 22.4 kg Taper: BT-40x2 (adapter holder) Special features Horizontal and vertical mounting BT-40 compatibility Assembly aid Manufacturer: Vertex FAQ Is the unit suitable for both horizontal and vertical assembly tasks? Yes. The VTD-1 is designed for both horizontal and vertical use, allowing flexible orientation without the need for multiple fixtures. Which taper standard does the assembly aid use? The assembly aid uses a BT-40 interface with an adapter holder, making it compatible with standard BT-40 toolholders. What are the main dimensions and weight of the device? The VTD-1 has a foot of 238 x 305 mm, a height of 187 mm and a weight of 22.4 kg. Can the device be integrated with CNC machines that use BT-40 tooling? Yes. The VTD-1’s BT-40 taper and adapter holder permit integration with machines and tooling systems that conform to the BT-40 standard. What is the SKU and GTIN for ordering and inventory purposes? SKU VTD-1, GTIN 4061905084904 are provided for procurement and inventory tracking. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
187mm Assembly Aid Horizontal And Vertical, SK‑50x1/SK‑40x1 Adapter, 238x305mm Base - Vertex
Benefit from precise horizontal and vertical mounting with the robust Vertex VTD-8 Mounting Aid, which combines compatibility with SK-40 and an adapter for SK-50x1 plus a stable 238 x 305 mm base; order the VTD-8 directly via Metav Werkzeuge or ask our consultants if needed. VTD-8 Mounting Aid — Vertex toolholder support for SK-40 / SK-50 with compact footprint The VTD-8 Mounting Aid is a dedicated toolholder support designed for horizontal and vertical mounting tasks in workshop and toolroom environments, enabling secure, repeatable setup of tapered toolholders and adapters. Compatible with SK-40 and SK-50 tapers Stable 238 x 305 mm base footprint 187 mm working height for compact setups Robust 25 kg construction for repeatable setups Engineered for repeatable, accurate setups The VTD-8 is engineered to reduce setup variation and improve concentricity when transferring toolholders between machines or fixtures. The unit accepts an SK-40 mounting and can be fitted with an SK-50x1 adapter holder, which simplifies adapting between tapers without improvised fixtures. By providing a defined reference for the shank and taper, the device minimises alignment errors and rework, supporting faster changeovers and consistent results across repetitive operations. Stable footprint for reduced vibration and reliable holding A broad 238 x 305 mm base combined with a substantial mass ensures the mounting aid remains immobile during handling and inspection tasks. The approximately 25 kg construction dampens small disturbances and lowers the risk of micro-movements that can compromise trueness. For workshops seeking to improve first-pass quality, the increased stability directly translates into fewer rejects and less time spent correcting misaligned assemblies. Compact height for versatile placement and easy access With a working height of 187 mm, the fixture fits comfortably on most benches and inspection tables while keeping the toolholder at an ergonomic level for adjustment and measurement. The capability to operate in both horizontal and vertical orientations allows flexible use for different procedures, from manual assembly to visual inspection and gauging. The compact vertical profile also helps when space on the shop floor or measuring bench is limited. Practical design for integration into workshop workflows Built by Vertex, the mounting aid focuses on practical integration rather than unnecessary complexity. The combination of standard taper compatibility, a robust base and straightforward adapter mounting makes it suitable for production lines, maintenance bays and toolrooms alike. Metav Werkzeuge’s European supply network and quality filter in Emmerich ensure reliable availability and traceable delivery for industrial customers who demand consistent tooling accessories. Contact Metav Werkzeuge in Emmerich to discuss how the Vertex VTD-8 can be integrated into existing setups or to request detailed specifications from our advisors. Technical data SKU: VTD-8 GTIN: 4061905096273 ECLASS: 21029203 Designation: Mounting aid, horizontal and vertical Spindle taper: SK-40 Facts Weight: 25 kg Height: 187 mm Base footprint: 238 x 305 mm Special features Taper compatibility: SK-50x1 and SK-40x1 (adapter holder) Mounting options: horizontal and vertical Manufacturer brand: Vertex FAQ Is the mounting aid compatible with SK-40 toolholders? Yes. The VTD-8 accepts an SK-40 mounting and is intended for direct use with SK-40 toolholders. Can the device be adapted for SK-50 tapers? Yes. The mounting aid accommodates an SK-50x1 adapter holder, allowing use with SK-50 tapers when required. What are the base dimensions and weight for stability? The base footprint is 238 x 305 mm and the unit weighs approximately 25 kg, providing a stable platform for handling and inspection. Does the fixture support horizontal and vertical mounting? Yes. The device is designed for both horizontal and vertical orientations to suit different workshop tasks. Is the mounting aid suitable for bench and toolroom use? Yes. With a compact 187 mm working height and a robust construction, the VTD-8 is suitable for bench, toolroom and production environments. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
Secure components with reliable workpiece clamps
Workpiece clamps, also known as workholding clamps or workholding devices, form the essential mechanical interface between machine and part in industrial fabrication. They keep components absolutely play-free, positionally accurate and vibration-resistant during milling, turning, drilling or grinding.
How workpiece clamps ensure process stability
A correctly specified clamping concept transfers the high cutting and feed forces of modern CNC machines into the machine table or spindle without deforming the part. The right combination of mechanical, hydraulic, pneumatic or magnetic solutions enables fast, repeatable setups and supports automated part change where required. Typical applications range from single-part turning to high-volume series milling and complex five-axis machining.
Concrete production benefits at a glance
- repeatable positioning: reduces scrap and rework
- high clamping forces: withstands aggressive cutting without part movement
- reduced set-up time: modular systems and quick-change features speed throughput
- improved surface finish: vibration damping for finer results and tighter tolerances
- flexible compatibility: vices, chucks, clamping plates and zero-point systems for diverse geometries
Why Metav's range is the practical choice
Metav combines decades of specialist know-how with a broad, handpicked range that democratises precision for workshops and industry alike. Based in Emmerich, Metav acts as a quality filter for the European market and supplies more than 250,000 products from precision metrology to complete workshop equipment. With the trust of over 48,000 customers, Metav offers a single-source approach that reduces supplier complexity and secures dependable delivery to your workbench.
Technical data
- function: mechanical interface between machine and workpiece
- primary requirements: absolute positional accuracy; vibration reduction; high clamping forces
- technologies: mechanical, hydraulic, pneumatic, magnetic
- typical components: machine vices; chucks; clamping plates; zero-point systems; pratzen; clamping jaws
- application areas: milling; turning; drilling; grinding; automated part change systems
- production benefits: reduced set-up time; enhanced process security; optimised series and single-part production
The practical summary
Workpiece clamps bring the stability and repeatability required to meet tight tolerances and excellent surface quality, making them indispensable across machining operations. Choosing the right workholding clamps and modular workholding devices is a decisive step towards higher productivity and consistent part quality.
FAQ
What types of workpiece clamps are suitable for automated machining?
Workholding clamps with quick-change modules, hydraulic actuation or magnetic systems are commonly used for automated machining. These workholding devices enable fast, repeatable part changes and integrate with zero-point systems.
How do workpiece clamps affect surface finish and tolerances?
A stable clamping concept minimises vibration and part movement; this improves surface finish and supports achieving narrow tolerances when using high-precision workpiece clamps or workholding devices.
Can the same workpiece clamps handle different part geometries?
Modular workholding clamps and adaptable clamping jaws allow flexible fixturing for varied geometries; combining vices, clamping plates and pratzen increases versatility on the shopfloor.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com