Secure and precise workholding for metalworking productivity
Workholding devices such as workpiece clamps and chuck systems provide absolute positional stability and vibration damping during milling, turning, drilling and grinding, ensuring parts remain free of play under high CNC cutting and feed forces. By transferring clamping loads into the machine table or spindle without deforming the component, a well engineered workholding solution improves machining accuracy, surface finish and process reliability while reducing set-up times. Modular systems from machine vices and chucks to zero-point systems and specialised fixtures enable fast changeovers and support both serial and single-part production, delivering consistent clamping force, repeatability and enhanced throughput.
18mm Quick-Change Insert SES 14.5mm Square Shank for DIN 374/376 M22, Adjustable Torque-Limiter - TECWERK
Combining an adjustable safety clutch with direct shaft-square torque transmission in a compact Size 3 design, this quick-change insert reduces tap breakage and maintains consistent threading performance. Order the SES insert via Metav Werkzeuge or consult our specialists for matching the adapter to your production setup. Quick-change insert SES 18 mm x 14.5 mm – Size 3, adjustable safety clutch (TECWERK) The Quick-change insert SES 18 mm x 14.5 mm Size 3 is a tap adapter with an adjustable safety clutch for torque limitation, designed for use with DIN 374/376 M22 threading applications. Adjustable safety clutch for torque limiting Prevents tap breakage during interrupted cuts Shaft-square drive for reliable torque transmission Compatible with DIN 374/376 M22 tap sizes Faster, safer threading through adjustable torque control The integrated adjustable safety clutch enables precise limitation of applied torque, which reduces the risk of tool failure during threading. By disengaging at a preset torque level, the clutch protects the tap from snap-off in interrupted or snagging threads, improving uptime and reducing consumable costs. This mechanical protection is particularly valuable in repetitive production environments where unexpected torque spikes otherwise require frequent tap replacement and interrupt workflow. Compact Size 3 form factor that fits standard tap holders Designed as a Size 3 quick-change insert, the component fits into common tap-change systems and mates with holders prepared for DIN 374/376 M22. The compact geometry preserves bench space and simplifies tool inventory: different shank sizes can be accommodated by swapping appropriate inserts, maintaining a small stock of adapters while covering multiple tap shank dimensions. The adapter’s construction focuses on a secure interface and repeatable positioning to ensure consistent thread quality across batches. Direct torque transfer via shaft square for dependable performance Torque is transmitted through the shaft square, ensuring a positive mechanical drive between machine and tap. This avoids slippage under load and enables efficient power transfer even in high-demand machining cycles. The device’s dimensions (including L3, L4 and D values) have been optimised to balance rigidity and accessibility, allowing the tap to reach into confined thread depths without compromising control or safety. The result is reliable, repeatable threading that supports process stability. Practical benefits for workshop and industrial users By preventing tap breakage and simplifying insert changes, this adapter contributes to measurable efficiency gains on the production floor. Reduced downtime from fewer tool failures and faster insert swaps improves throughput while lowering tool consumption. Backed by established industrial standards compatibility, the insert offers a pragmatic solution for workshops and maintenance departments that require robust tap protection and straightforward integration into existing quick-change systems. For tailored selection advice and prompt supply from Metav Werkzeuge, contact our specialists who will ensure the SES insert suits the intended tap shank and application. Technical data Article number: 4000832688NW Type: Size 3 Designation: Quick-change insert SES 18 mm x 14.5 mm for DIN 374/376 M22 Packaging unit: 1 Facts Diameter: 18 mm Square drive: 14.5 mm L3: 41 mm L4: 55.5 mm L5: 45 mm D: 72 mm L1: 45.2 mm D1: 48 mm Special features Adjustable safety clutch for torque limitation Prevents tap breakage in interrupted cuts Torque transmission via shaft square For different shank sizes, different inserts required Suitable for DIN 374/376 M22 tapping applications FAQ Is this insert compatible with standard M22 taps to DIN 374/376? Yes. The SES quick-change insert is specified for DIN 374/376 M22 and is designed to accept taps made to that standard. How does the adjustable clutch protect taps during threading? The adjustable safety clutch in the SES insert disengages at a preset torque, limiting peak loads and thereby reducing the likelihood of tap breakage during sudden jams or interrupted cuts. Which shank sizes are supported by this Size 3 insert? The insert transmits torque via a 14.5 mm shaft square; for other shank dimensions, alternative inserts are required to match the specific holder and tap shank. Can the insert be used in automated tapping stations? Yes. With its direct shaft-square torque transmission and compact dimensions, the insert is suitable for integration into automated and manual tapping stations that accept Size 3 quick-change adapters. What are the key dimensions to check for fitment? Refer to the SES insert dimensions: diameter 18 mm, square 14.5 mm, and the listed L1, L3, L4, L5 and D measurements to verify compatibility with the tool holder and required thread depth. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
18mm Quick-Change Insert SES 14.5mm Square Shank for DIN 374/376 M24, Adjustable Torque-Limiting Clutch - TECWERK
Take advantage of the combination of adjustable torque protection, fast tool changes and standard compliance to reduce tap breakage and downtime; order the insert directly via Metav Werkzeuge or consult our specialists for selection and shank compatibility. TECWERK SES Quick-change insert, size 3 — adjustable safety clutch, 18 mm diameter The TECWERK SES quick-change insert is a size 3 tool-holder insert designed for tapping to DIN 374/376 M24, offering torque-limiting protection and rapid exchange for production environments. Adjustable safety clutch for torque limitation Prevents tap breakage during tapping Shaft square 14.5 mm for torque transfer Engineered protection that reduces tool failure and downtime The SES quick-change insert combines an adjustable safety clutch with a robust torque-transfer concept to protect cutting tools during tapping operations. By limiting peak torque, the device significantly reduces the risk of tap breakage, which in turn lowers rework and machine downtime. The clutch setting can be calibrated to the process requirements, enabling consistent production runs while preserving expensive tools and thread quality. Faster changeovers and clear torque transmission Quick-change capability shortens setup times and supports lean workflows by enabling rapid replacement of inserts without complex reconfiguration. Torque is transmitted through the shaft square (14.5 mm), ensuring direct mechanical drive and minimising play between spindle and tool. This design delivers dependable power transfer for reproducible thread forming and tapping cycles, improving overall process efficiency and cycle-time predictability. Designed for compatibility and straightforward workshop planning The insert is specified for compliance with DIN 374/376 M24 and identified as size 3, simplifying tool selection for standard tapping tasks. Key dimensions — including diameter 18 mm, L3 41 mm, L4 55.5 mm and L1 45.2 mm — are provided for fixture and machine-tool planning, so integration into existing setups is straightforward. Where different shank sizes are used, matching inserts are required, allowing tailored adaptation to varied tap shanks without compromising torque control. Operational reliability and maintenance benefits Built to support repetitive tapping operations, the unit promotes longer tool life and predictable maintenance cycles. The adjustable torque limiter not only prevents immediate failure but also reduces cumulative stress on machines and taps, resulting in fewer unexpected interruptions. Simple adjustment and clear mechanical design mean maintenance is quick and inspection intervals can be planned with confidence. For precise torque protection and reliable quick-change operation, contact Metav Werkzeuge for advice and ordering of the TECWERK SES quick-change insert (SKU 4000832689NW) to ensure the correct insert for the required shank size and tapping standard. Technical data Article number: 4000832689NW Manufacturer: TECWERK Product type: Quick-change insert SES Core data Diameter: 18 mm Shaft square: 14.5 mm Size: 3 Suitable for: DIN 374/376 M24 Packaging unit: 1 Special features Adjustable safety clutch for torque limitation Prevents tap breakage Torque transmission via shaft square L3: 41 mm L4: 55.5 mm L5: 45 mm D: 72 mm L1: 45.2 mm D1: 48 mm FAQ How does the adjustable safety clutch protect tapping tools? The adjustable safety clutch in the TECWERK SES quick-change insert limits peak torque by disengaging or slipping at the set threshold, preventing sudden overloads that cause tap fracture and extending tool life. Is this insert compatible with standard M24 taps? Yes, the insert is specified for use with taps conforming to DIN 374/376 M24 and is designed to provide secure torque transmission for that standard. Which shank sizes are supported by this system? Torque transmission is via the shaft square; this particular insert uses a 14.5 mm square. Different shank sizes require corresponding inserts to ensure proper fit and torque transfer. Can the clutch setting be adjusted on the shop floor? The safety clutch is designed for workshop adjustment so the torque threshold can be adapted to the material and tap geometry, enabling flexible process control. What dimensional data should be considered when planning integration? Key dimensions include diameter 18 mm, L3 41 mm, L4 55.5 mm, L5 45 mm, L1 45.2 mm and D1 48 mm; these values support fixture design and machine compatibility checks. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
18mm Sechskant Nut Hexagon Nut M12 Strength Class 10, DIN 6330B - AMF
Robust fastening performance with standardised DIN geometry and a high strength class 10 makes this hexagon nut ideal for demanding mechanical assemblies; its compact overall height and standard wrench size simplify installation and save space. Order supply and expert advice directly via Metav Werkzeuge or consult the Metav team for application guidance. Hexagon nut DIN 6330B M12 (SW 19 mm) – strength class 10, AMF A hexagon nut DIN 6330B M12 engineered for high-strength fastening in industrial assembly and maintenance tasks. DIN 6330B standardised geometry Strength class 10 for high loads 19 mm wrench size (SW 19) Compact overall height 18 mm High-strength joints for industrial assemblies The strength class 10 rating identifies this fastener as suitable for applications where elevated tensile and clamping forces are required. Manufactured to DIN 6330B, the geometry ensures predictable load distribution across bolted joints, reducing the risk of loosening under dynamic stress. For engineers and workshop planners, the combination of a standard M12 thread and high strength offers a dependable solution where safety margins and component lifetime are priorities. Precision geometry that eases installation With a declared wrench size SW 19 and a corner measurement of 21.1 mm, the nut matches common spanners and sockets used in production environments, enabling rapid assembly and consistent torque application. The overall height 18 mm provides a compact footprint, which benefits installations in confined assemblies or stacked components. The standardised shape aligned to DIN specifications also facilitates automated handling and feeding in assembly lines, contributing to faster cycle times and fewer misfits. Compatibility and practical application benefits Designed as a genuine hexagon nut, this component integrates with standard M12 bolts and threaded rods, offering versatility across machinery, frames, and fixture systems. The standard DIN reference supports straightforward component selection and procurement, simplifying inventory management for maintenance departments and purchasing teams. Traceability via the SKU and adherence to recognised standards support quality documentation and regulatory compliance in industrial contexts. Procurement reliability and workshop efficiency Packaged as single units with a clear SKU for stock control, the item supports controlled replacement and allows workshops to order the exact quantity required. The standard designation and brand marking assist in quality checks and batch verification during incoming-inspection. For supply chain managers, the combination of compliant geometry and high strength reduces the need for frequent re-evaluation of fastening elements, promoting consistent assembly quality across production batches. For dependable supply and technical guidance on this AMF hexagon nut, contact Metav Werkzeuge for tailored procurement and application advice via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 4000833395NW SKU: 4000833395NW Brand: AMF Type: M12 Standard: DIN 6330B Facts Thread size: M12 Overall height: 18 mm Wrench size (SW): 19 mm Corner measurement: 21.1 mm Strength class: 10 Packing unit: 1 Special features Hexagon nut Standardised DIN 6330B geometry High-strength classification Compact design for tight assemblies FAQ What does strength class 10 mean for the fastener? Strength class 10 indicates a high mechanical strength level for the nut and compatible bolts, suitable for applications with elevated tensile and clamping requirements; the AMF hexagon nut conforms to this class for robust joints. Is this nut compatible with standard M12 bolts? Yes, the nut is specified as M12 and is intended for use with matching M12 bolts and threaded components, following the DIN 6330B geometry to ensure fit and load distribution. Which wrench or socket fits this nut? The nut uses a standard SW 19 (19 mm) wrench size, corresponding to a corner measurement of 21.1 mm, enabling use of common hand tools and sockets. Where is this nut typically used in industry? Applications include machinery assembly, structural frames, fixtures and maintenance operations where a high-strength M12 fastening is required and DIN-standard components are preferred. How is the product identified for ordering and stock control? The item is listed under SKU 4000833395NW and labelled with the DIN reference and strength class to facilitate procurement and inventory tracking. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
18mm T-Nutenstein mit M14 Gewinde DIN 508, für T-Nut 18mm, Festigkeitsklasse 10 - AMF
T-Nutenstein (DIN 508) Werksnorm T-Nut 18mm M14 AMF – T-Nutenstein für Spanntechnik T-Nutenstein (DIN 508) Werksnorm T-Nut 18mm M14 AMF sorgt für sichere und normkonforme Befestigung von Spannmitteln und Vorrichtungen in T-Nuten mit 18 mm Breite. Hohe Festigkeit Klasse 10 Passend für T-Nut 18 mm M14 Gewinde für sichere Befestigung Entspricht DIN 508 Werksnorm Robuste Verbindung für Maschinen und Vorrichtungen Der T-Nutenstein wurde entwickelt, um Bauteile und Spannmittel in T-Nuten wirtschaftlich und zuverlässig zu befestigen. Durch die DIN 508-Konformität ist eine Austauschbarkeit mit etablierten Maschinentischen und Aufspannsystemen gewährleistet, was Rüstzeiten reduziert und die Planbarkeit in der Fertigung erhöht. Die Anwendung eignet sich besonders für Werkstatt, Maschinenbau und Vorrichtungsbau, wenn es auf stabile, standardisierte Befestigungen ankommt. Belastbarkeit und Effizienz im Betrieb Dank Festigkeitsklasse 10 bietet der Nutenstein hohe Tragfähigkeit und beständige Kraftübertragung beim Spannen. Das M14-Gewinde erlaubt die Verwendung handelsüblicher Schrauben und reduziert die Teilevielfalt in der Werkstatt. Folge: kürzere Montagezeiten und geringere Stillstandsrisiken bei Indexwechseln oder Nachrüstungen. Diese Eigenschaften unterstützen eine effiziente Fertigungsorganisation und verbessern die Prozesssicherheit. Passgenauigkeit und einfache Montage Mit einer Einbaubreite für T-Nut 18 mm und einer Höhe 20 mm fügt sich der Nutenstein in gängige Aufspann-Standards ein. Die kompakte Bauweise ermöglicht flexible Positionierung in Nutenleisten, während die Gewindegröße die Anpassung an unterschiedliche Spannkräfte erlaubt. Anwender profitieren von einfacher Handhabung und klarer mechanischer Funktion ohne zusätzlichen Fräsaufwand oder spezielle Werkzeuge. Zielgruppe und Anwendungsbeispiele Konzipiert für Konstrukteure, Instandhalter und Betreiber von Werkzeugmaschinen, bietet der Nutenstein eine praxisnahe Lösung für Serien- und Einzelspannplätze. Typische Einsätze sind das Befestigen von Aufspannplatten, Anschlägen oder Maschinenhilfen sowie die Nachrüstung bestehender T-Nut-Tische, wenn Normkonformität und Belastbarkeit gefragt sind. Für eine zuverlässige, normgerechte Befestigung empfehlen wir den Einsatz dieses Nutensteins von AMF; Beratung und Lieferung erfolgen über Metav Werkzeuge – per eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 Produktmerkmale Artikelnummer: 4000833206NW Marke: AMF Produktart: T-Nutenstein Norm: DIN 508 Fakten Höhe: 20 mm T-Nut: 18 mm Gewinde: M14 (metrisches Gewinde) Festigkeitsklasse: 10 Axite-Werte: A 17,7; E 28; K 10 Besonderheiten DIN 508 (Norm für T-Nutensteine) Werksnorm T-Nut 18mm M14 AMF Verpackungseinheit: 1 FAQ Wie montiere ich den T-Nutenstein korrekt? Die Montage erfolgt in der passenden T-Nut; der T-Nutenstein (DIN 508) Werksnorm T-Nut 18mm M14 AMF wird in die Nut eingeschoben und mit einer geeigneten M14-Schraube gespannt. Achten Sie auf saubere Nuten und passende Schraubenlänge. Für welche T-Nuten ist dieser Nutenstein geeignet? Der Nutenstein ist für T-Nut 18 mm ausgelegt und entspricht der DIN 508, wodurch er in standardisierte T-Nuten von Maschinentischen und Aufspannsystemen passt. Welche Vorteile bietet die Festigkeitsklasse 10? Die Festigkeitsklasse 10 garantiert hohe Zug- und Druckfestigkeit, was sichere Spannkräfte und lange Standzeiten bei wiederholter Belastung ermöglicht. Enthält die Artikelnummer weiterführende Informationen? Die Artikelnummer 4000833206NW identifiziert den Nutenstein im Sortiment; für Bestell- und Verfügbarkeitsanfragen nutzen Sie bitte die Angabe zusammen mit Marke und Produktart. Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
18mm T-Slot Bolt M16 L80mm Grade 8.8 DIN 787 - AMF
Combine standard conformity and high clamping strength for reliable fixture assembly; the bolt’s DIN 787 geometry and Grade 8.8 rating ensure repeatable performance. Order the fastening element directly via Metav Werkzeuge or consult the team for application-specific advice. AMF T-slot bolt (DIN 787) – 18 mm T-slot, M16 x 80 mm, Grade 8.8 The AMF T-slot bolt (DIN 787) is a robust fastening element for slot-based clamping and fixture systems in machinery, jigs and workshop tooling. DIN 787 standardised design Suitable for 18 mm T-slots M16 threaded shank, 80 mm length High-strength Grade 8.8 steel Reliable clamping through standard conformity Conformity with DIN 787 provides assured interchangeability across slotted profiles and fixture systems, reducing adjustment time during set-up. The combination of an 18 mm T-slot profile with an M16 threaded shank and 80 mm overall length delivers a predictable engagement depth and consistent thread engagement. This standardised geometry supports quicker fixture changes and minimises the need for bespoke components, improving throughput in production and maintenance operations. The design focus is on functional reliability rather than decorative finish, ensuring secure seating and repeatable clamping in workshop and industrial environments. Engineered for strong performance and operational safety The fastener’s Grade 8.8 designation signals a high-strength specification suitable for demanding clamping tasks where elevated preload and resistance to loosening are required. The robust thread form and material grade permit confident torque application within common clamping practices, helping to maintain fixture integrity under vibration and dynamic loads. By choosing a high-strength fastener, operators gain enhanced safety margins for assemblies that experience cyclic stresses, while maintenance cycles can be planned with greater predictability. The technical advantage lies in converting the material and geometry into consistent clamping performance rather than relying on oversized components. Practical dimensions for efficient workshop integration Clear dimensional data supports inventory management and part matching: the product offers a compact overall length of 80 mm combined with slot compatibility for 18 mm profiles, simplifying selection for modular tooling systems. Additional published dimensions (A: 17.7; B: 55; E: 28; K: 10) assist in verifying clearance, head engagement and seating depth when integrating the bolt into existing fixturing. Supplied per single unit and identified by SKU 4000603228NW, the component is suited to both one-off repairs and systematic replenishment of maintenance stores, reducing downtime and streamlining parts logistics while keeping assembly workflows consistent. Contact Metav Werkzeuge for application guidance and stock details — expert advice and delivery from Emmerich is available to ensure the correct AMF T-slot bolt for each clamping task. Technical data Article number: 4000603228NW Label: T-Nutenschraube DIN 787 T-Nut 18mm M16 L.80mm Güte 8.8 AMF Manufacturer: AMF Product type: T-slot bolt SKU/UID: 4000603228NW Dimensions & thread T-slot width: 18 mm Thread: M16 Overall length: 80 mm Standard: DIN 787 Packing unit: 1 Additional dimensions: A: 17.7; B: 55; E: 28; K: 10 Special features Strength class: Grade 8.8 Suitable for slot-based clamping systems Designed for repeatable fixture assembly FAQ Is this bolt compatible with 18 mm T-slots? The AMF T-slot bolt (DIN 787) is designed for 18 mm T-slots and features an M16 thread and 80 mm overall length (SKU 4000603228NW) for direct integration into standard slotted profiles. Which standard does the fastening element conform to? Conformity to the DIN 787 standard ensures geometric compatibility and repeatable seating for the T-slot bolt across compliant clamping systems. What does Grade 8.8 indicate for this fastener? Grade 8.8 denotes a high-strength classification for the bolt, offering improved tensile and yield performance that supports elevated clamping forces and greater resistance to loosening under load. Are additional dimensions available for installation planning? Yes — the product includes auxiliary dimensions listed as A: 17.7; B: 55; E: 28; K: 10 to assist with clearance checks and head engagement during fixture design. How is the product packaged and identified? The bolt is supplied per unit (packing unit: 1) and can be ordered using SKU 4000603228NW for accurate replenishment and stock control. Manufacturer: AMF; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
18mm T-Slot Clamping Screw Set M16 38-Piece Hardened, Strength Class 8/10 - AMF
Take advantage of a robust combination of tempered M16 fasteners and compatibility with 18 mm T-slots for dependable clamping performance; the comprehensive set is supplied in a wooden case for organised storage. Order the clamping screw set directly via Metav Werkzeuge or consult our specialists for application advice. Clamping screw set No. 6520 – M16 fasteners for 18 mm T-slots (AMF) Clamping screw set No. 6520 designed for fixture and machine-table clamping in 18 mm T-slots Hardened components for high load applications M16 thread for standard clamping connections Compatible with 18 mm T-slots Complete set in wooden case with hinged lid Consistent, high-force clamping for machining and fixtures This clamping set delivers reliable clamping force thanks to components that are fully tempered, ensuring dimensional stability under repeated load. The use of M16 fasteners provides a recognised thread standard for machine tables and fixture systems, simplifying integration into existing setups. For manufacturers and workshops seeking dependable repeatability, the hardened construction reduces fastener deformation and extends service intervals, supporting uninterrupted production cycles. Engineered strength and material resilience for demanding tasks Components in the set are supplied with strength class 8 and strength class 10, offering a choice between high tensile capacity and extra-high performance where required. The tempered treatment of all parts improves fatigue resistance while maintaining machining accuracy; this combination is particularly useful when clamping steels or alloyed materials under elevated loads. Technical users benefit from clearer specification compliance and predictable mechanical behaviour across diverse clamping scenarios. Organised delivery optimises workshop workflow Delivered complete in a wooden case with hinged lid, the set keeps components organised at the point of use, reducing search time and downtime. The tidy storage solution supports a systematic workshop layout and protects the fasteners from contamination when not in use. For operations aiming to streamline setup times and maintain traceability of clamping hardware, the packaged arrangement contributes to a faster, cleaner workflow. Broad compatibility and practical applications Designed for standard 18 mm T-slots, the kit suits machine tables, drilling and milling fixtures, and modular clamping systems found in small-batch production and toolroom environments. The combination of standard M16 thread and hardened fasteners makes the set a versatile choice for securing workpieces from aluminium to alloyed steels. Where precision and repeatability are essential, the set supports efficient clamping without the need for customised fasteners. Contact Metav Werkzeuge today to discuss how the AMF clamping screw set No. 6520 can be matched to specific fixture requirements or to request a detailed specification from our Emmerich team Technical data SKU: 4000833385NW Type: No. 6520 Product: Clamping screw set Manufacturer: AMF Thread: M16 Facts T-slot compatibility: 18 mm Contents: 38 items Pack unit: 1 Special features All parts tempered Strength class 8 and strength class 10 Supplied in wooden case with hinged lid Suitable for T-slots FAQ What materials can be clamped with this set? The AMF clamping screw set No. 6520 is designed for general workshop and production use and, with its tempered fasteners and strength classes 8/10, is suitable for clamping materials ranging from aluminium to alloyed steels in standard machining operations. Is the thread standard compatible with common fixtures? Yes. The set uses M16 threads, which are a common standard for clamping fixtures and machine tables, ensuring straightforward compatibility with existing clamping hardware. Does the set include all components for immediate use? The delivery of the AMF clamping screw set No. 6520 is complete and comes organised in a wooden case with hinged lid, providing an immediately usable assortment of fasteners and accessories for workshop deployment. Are the components treated for durability? All components in the set are tempered, offering improved fatigue resistance and longer service life under repeated clamping cycles; the inclusion of strength class 8 and 10 gives options for higher tensile requirements. Can this set be used on modular clamping systems? Yes. With compatibility for 18 mm T-slots and standard M16 threads, the set is suitable for modular clamping systems, machine tables and fixture assemblies commonly found in production and toolroom environments. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
18mm T-Slot Nut M10 DIN 508 With Strength Class 10 - AMF
Take advantage of a DIN 508‑compliant design combined with an M10 internal thread and strength class 10 for consistent clamping performance in 18 mm T‑slot profiles; order or request advice directly via Metav Werkzeuge for seamless integration into modular fixturing. T-slot nut (DIN 508) — T‑nut, 18 mm T‑slot, M10 thread, AMF The T-slot nut (DIN 508) is a factory‑standard T‑nut designed to secure fixtures and components in 18 mm T‑slot profiles for machine tables and modular assemblies. Compliant DIN 508 standard Fits 18 mm T‑slot profiles M10 internal thread for standard bolts High load capacity, strength class 10 Reliable clamping for modular assemblies The T‑slot nut offers a straightforward solution for secure mounting in profile‑based systems. Its adherence to DIN 508 ensures dimensional compatibility and repeatable mounting results across machine tables and fixture systems. The combination of the M10 thread with compact mounting dimensions provides a robust connection that keeps clamping hardware aligned under repetitive loads, reducing setup time and improving process reliability. Thread integrity and grade‑based load safety Designed with strength class 10, the component provides enhanced tensile and shear resistance compared with lower classes. The internal M10 thread accepts commonly used bolts and allows uniform torque transmission for consistent clamping force. Reference installation dimensions are given as A: 17.7 mm, E: 28 mm and K: 10 mm, which serve as quick checks during planning and allow engineers to verify compatibility with existing fixturing systems before procurement. Practical handling and workshop benefits Engineers and fitters will appreciate the compact footprint and clear specification set that simplifies BOM entries and inventory management. The factory standard format reduces the need for custom machining of insert points and streamlines assembly procedures. When combined with a controlled parts supply from a single source, the element contributes to shorter assembly cycles and a more predictable production flow, supporting both small workshops and larger production lines. For compatibility checks or procurement assistance, contact Metav Werkzeuge with SKU 4000603167NW; consultants at Metav Werkzeuge provide detailed advice and supply direct from Emmerich for reliable delivery and technical clarification. Technical Data Article number: 4000603167NW Label: T‑Nutenstein (DIN 508) Werksnorm T‑Nut 18mm M10 AMF Brand: AMF Facts Standard: DIN 508 T‑slot size: 18 mm Height: 20 mm Thread: M10 Reference dimensions: A: 17.7 mm, E: 28 mm, K: 10 mm Strength class: 10 Packaging unit: 1 Special features Factory standard T‑nut for industrial fixturing Internal metric thread for standard bolts Compact dimensions for tight assemblies Consistent specification for repeatable setups FAQ What T‑slot width is this nut intended for? The T‑slot nut is designed for 18 mm T‑slot profiles and provides secure clamping when installed in corresponding slots. Which thread size does the component use? This T‑nut features an M10 internal thread suitable for standard M10 bolts and clamping elements. Is the component compliant with recognised standards? Yes, the product conforms to DIN 508, ensuring dimensional compatibility with standard machine tables and fixture profiles. What load class does the nut have? The part is specified as strength class 10, offering higher mechanical resistance for demanding clamping tasks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
18mm T-Slot Nut M12 DIN 508 High Strength Class 10 - AMF
Take advantage of a standardised clamping solution that combines DIN 508 conformity, precise fit for 18 mm T-slots and a robust M12 threaded connection to secure fixtures reliably — order directly via Metav Werkzeuge or ask our consultants for compatibility advice. T-slot nut (DIN 508) AMF — 18 mm, M12 thread The T-slot nut (DIN 508) AMF is a standard clamping element designed for secure fastening in 18 mm T-slots on machine tables and jigs. Conforms to DIN 508 standard Fits 18 mm T-slots precisely M12 thread for strong clamping Strength class 10 for high load capacity Consistent compatibility with machine-table standards Built to DIN 508, this T-slot fastener ensures interchangeability across standard machine tables and modular fixtures. Conformity to the standard reduces procurement complexity and minimises setup errors when replacing or adding clamps. The standardised geometry supports predictable clamping behaviour, so maintenance cycles and tool changes proceed with less downtime and clearer spare-part management. High-strength threaded connection for secure setups The M12 threaded connection combined with strength class 10 delivers a reliable load-bearing interface for medium to heavy clamping tasks. A higher strength class indicates enhanced tensile and yield performance, which reduces deformation under tightening and maintains clamping force over repeated cycles. This results in fewer retorques and a consistent clamping result that supports machining accuracy and workplace safety. Clear dimensional data to match fixture requirements Key dimensions are provided for precise integration into assemblies: height 20 mm, with axial values A: 17.7 mm, E: 28 mm, K: 10 mm noted in the technical details. These measurements assist engineers in verifying clearance, thread engagement and washer or bolt selection. The factory-standard specification simplifies parts lists and ensures the component aligns with existing modular tooling without guesswork. For a DIN 508-compliant clamping solution from AMF and fast availability through Metav Werkzeuge, request stock details or technical clarification referencing SKU 4000603168NW Technical data Article number: 4000603168NW Product: T-slot nut Label: T-Nutenstein (DIN 508) Werksnorm T-Nut 18mm M12 AMF Manufacturer: AMF Facts Height: 20 mm T-slot width: 18 mm Thread: M12 Standard: DIN 508 Packaging unit: 1 Axial data: A: 17.7 mm; E: 28 mm; K: 10 mm Strength class: 10 Special features Conforms to DIN 508 Factory standard for 18 mm T-slots High-strength M12 thread Intended for machine-table clamping and fixtures FAQ What T-slot size does this component suit? The T-slot nut (DIN 508) AMF is designed specifically for 18 mm T-slots, ensuring a precise fit for standard machine tables. What thread size is provided? The component features an M12 internal thread for bolt engagement and secure clamping. Is the nut compliant with an industry standard? Yes — the fastener is manufactured to DIN 508, which standardises dimensions and fit for T-slot nuts and supports interchangeability. What is the indicated strength class? The product is specified with strength class 10, indicating a high-grade threaded connection suitable for demanding clamping tasks. How is the item supplied for inventory planning? The packaging unit is listed as 1, and the article number is 4000603168NW for ordering and stock control. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
18mm T-Slot Nut M16 Rhombic High-Strength Class 10, Height 20mm - AMF
Take advantage of a compact, high‑tensile fastening solution that combines a rhombic profile, M16 thread and compatibility with an 18 mm T‑slot for reliable fixture clamping. Order the AMF T‑slot nut directly via Metav Werkzeuge or consult the advisers for application-specific guidance. T‑Nut No. 510 — Rhombic T‑slot Nut for 18 mm T‑slots, M16 Thread (AMF) The T‑Nut No. 510 is a rhombic T‑slot nut designed for secure clamping in 18 mm T‑slots, suitable for fixtures, jigs and modular machining setups. Rhombic profile for positive locking Fits 18 mm T‑slot systems M16 thread for high clamping force Strength class 10 high tensile design Robust clamping that keeps fixtures secure and repeatable The rhombic profile provides a positive locking geometry that reduces rotation and slippage under load, which is essential for repeatable set‑ups in production and toolroom environments. The combination of an M16 thread and strength class 10 construction translates into higher allowable clamping torque compared with lower grades, enabling tighter fixation of workpieces and fixturing elements. This results in fewer re‑clamps, shorter machine downtime and a more consistent machining process, improving overall throughput without compromising stability. Fast installation and straightforward integration into modular systems The compact form factor and standard dimensions mean straightforward installation into common T‑slot tables and extruded profiles. The designation for an 18 mm T‑slot ensures compatibility with widely used machine tables and clamping rails, while the rhombic shape makes positioning precise and self‑centering when tightened. For planners and shop floor personnel, this reduces assembly time and simplifies fixture design: the nut acts as a secure anchor point, enabling rapid adjustments and modular reconfiguration with minimal tooling investment. Reliability and supply backed by an experienced partner Delivered in single units for exact planning, the component is produced for durability under frequent use and is intended for heavy‑duty clamping tasks. Metav Werkzeuge combines logistics and quality control to provide consistent availability and inspection as part of a broader offering of precision products; this includes a large catalogue and established trust across industrial customers. For procurement and production managers, the documented strength class 10 rating and standard 18 mm interface make specification straightforward and reduce the need for bespoke fastening solutions. For heavy‑duty fixturing with AMF T‑Nut No. 510, request supply and expert advice from Metav Werkzeuge — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitability for specific applications Technical data Article number: 4000833219NW Label: T‑Nutenstein No. 510 T‑Nut 18mm M16 rhombic AMF Type: No. 510 Product type: T‑slot nut Manufacturer: AMF UID: 4000833219NW Packaging unit: 1 Core dimensions T‑slot width: 18 mm Height: 20 mm Thread: M16 Strength class: 10 Addition A: 17.7 Addition E: 28 Addition K: 10 Special features Rhombic profile High‑tensile design AMF brand FAQ Which slot systems is this nut compatible with? The T‑slot nut is designed for 18 mm T‑slot systems; the rhombic profile ensures positive locking in compatible machine tables and extruded rails. What thread size does the nut use and what does that allow? The nut features an M16 thread, which permits higher clamping forces suitable for robust fixture assemblies and is standard for many heavy‑duty clamping applications. How does the strength class affect performance? With strength class 10, the component offers elevated tensile properties compared with lower classes, improving resistance to shear and enabling higher tightening torques in demanding fixtures. Is the geometry suitable for repeatable fixturing? Yes — the rhombic profile provides positive engagement that reduces rotation and drift, supporting repeatable positioning in jigs and modular fixtures using this AMF T‑slot nut (SKU 4000833219NW). Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
18mm Workpiece Clamp Quick-Action, Ø6–Ø14mm Compatibility - Vertex
Take advantage of a compact, precision-focused design and simple integration: the VDC-13 combines a small 18 mm footprint with compatibility for Ø6–Ø14 mm precision calipers and a lightweight build of 0.1 kg to support smooth workpiece handling. Order the workpiece carrier directly via Metav Werkzeuge or consult the team for clarification. VDC-13 Workpiece carrier (18 mm diameter) by Vertex A compact VDC-13 workpiece carrier designed for precise transfer and clamping tasks in fixtures and measuring setups Compact 18 mm diameter Compatible with Ø6–Ø14 mm calipers Lightweight at 0.1 kg Compact footprint for efficient cell layout The compact 18 mm diameter reduces occupied space on jigs and fixtures, enabling denser arrangement of handling equipment without sacrificing control. With its small diameter and minimal mass, the component lowers inertia during motion, which supports faster cycle times and contributes to higher throughput in serial processes. For production lines where floor space and robot reach are at a premium, the reduced size helps integrate additional handling stations while keeping motion profiles efficient. Designed for caliper‑based systems and easy integration Compatibility with precision calipers in the Ø6–Ø14 mm range makes the carrier suitable for existing measuring and clamping assemblies that rely on standard caliper shanks. The specified range indicates the shaft sizes the unit accepts, simplifying retrofit decisions: standard caliper mounts or modular adaptors will align directly with the carrier's interface. Clear numerical compatibility reduces engineering time during integration and supports predictable alignment in measuring and assembly workflows. Low mass for responsive handling and repeatability At only 0.1 kg, this carrier contributes negligible load to pick-and-place axes and rotary systems, improving responsiveness and reducing wear on drives and bearings. Lower moving mass often correlates with reduced energy consumption per cycle and less mechanical stress, which can extend the service intervals of handling equipment. The lightweight nature therefore supports both operational economy and consistent positional repeatability in automated sequences. Practical procurement and workshop support Sourcing precision components through a specialist distributor simplifies logistics and reduces supply-chain risk. Metav Werkzeuge provides a broad selection of compatible components and offers technical information necessary for selection. This makes replacing or expanding handling systems straightforward, while preserving compatibility with existing measuring fixtures and caliper-mounted tools. For tailored advice on integrating the Vertex VDC-13 into specific clamping or measuring setups, contact Metav Werkzeuge for expert guidance and rapid supply from Emmerich – eMail info@metav-werkzeuge.com or telephone +49 2822 7131930 Technical Data Article number: VDC-13 GTIN: 4061905083631 ECLASS: 21029190 Brand: Vertex Facts Diameter: 18 mm Compatible range: Ø6–Ø14 mm Weight: 0.1 kg Special features Suitable for precision calipers Ø6–Ø14 mm Compact design for tight assembly spaces Intended for fixture and transfer applications FAQ What shaft sizes does the carrier accept? The carrier accepts shafts and caliper mounts in the Ø6–Ø14 mm range, enabling direct use with common precision caliper interfaces. Is the VDC-13 suitable for automated pick-and-place systems? Yes, the VDC-13’s compact 18 mm diameter and low mass (0.1 kg) make it suitable for automated handling where low inertia and compact mounting are required. Can the workpiece carrier be retrofitted to existing fixtures? Integration is simplified by the carrier’s compatibility with standard caliper shank sizes; the VDC-13 aligns with common precision caliper mounts for retrofit applications. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
18x20x16mm Block for Guide Rail, T-Slot M6, S45C Steel, Set of 4 - Vertex
Benefit from a compact, durable clamping solution that combines a small footprint with standardised mounting and workshop-grade steel. With S45C construction, 18×20×16 mm dimensions and M6 T‑slot compatibility, the block maintains fixture rigidity without occupying valuable machine space. Order the block for guide rail directly via Metav Werkzeuge or ask our consultants if needed. Block for guide rail – Vertex guide block, compact S45C with M6 T‑slot The Block for guide rail is a compact clamping element designed for secure mounting of guide rails and fixtures in workshop and industrial jigs, offering standard M6 T‑slot compatibility for straightforward integration. Made from S45C for high durability Compact 18×20×16 mm footprint T‑slot M6 for standard mounting Supplied as a set of 4 pieces High rigidity in a compact footprint for reliable fixturing The compact geometry of this guide-block delivers a high rigidity‑to‑size ratio that keeps assemblies stable under load. Manufactured from S45C, the component provides a dependable balance between strength and machinability, which helps maintain precision in repeated clamping cycles. With a small 18×20×16 mm footprint and a net weight of 0.12 kg, the element is suitable where space is limited but positional stability remains critical. This combination reduces the need for oversized fixtures and supports efficient use of machine table area. Faster installation thanks to standardised mounting Built to fit a M6 T‑slot, the block integrates seamlessly with common rail and table systems, shortening setup times and simplifying retrofits. Supplied as a set of 4, the configuration allows simultaneous mounting of multiple rails or a quick replacement strategy that minimises downtime. The standardised interface also makes it easier to plan spare parts and harmonise tooling across several machines, contributing to a predictable production flow and measurable time savings during changeovers. Durable design made for workshop and industrial use The choice of S45C ensures a robust performance under everyday workshop conditions while remaining cost‑effective for larger purchases. The design emphasises simple geometry for consistent behaviour under load and straightforward maintenance. Produced by Vertex, the component benefits from established manufacturing practices and quality controls, which aligns with Metav’s role as a reliability filter for the European market. The result is a durable part that supports continuous operation without frequent replacement. Practical applications and where value is added This compact clamping element is intended primarily for guide rail mounting within jigs, fixtures and small automation tasks. Typical uses include linear guide retention, temporary fixturing during machining, and modular assembly benches where compact, repeatable positioning is required. By reducing fixture bulk and offering standardised mounting, the block helps improve workflow efficiency in both trade workshops and production lines while maintaining the precision expected in demanding tasks. Contact Metav Werkzeuge for tailored advice on integrating these Vertex guide blocks into existing setups and to discuss batch availability and technical details Technical Data Article number: 18TO14 GTIN: 4061905091971 Manufacturer: Vertex Facts Dimensions: 18×20×16 mm Weight: 0.12 kg Pieces per set: 4 T‑slot: M6 eClass: 23300402 Special features Material: S45C Designed for guide rail mounting Supplied as a set of 4 pieces Brand: Vertex FAQ What material is used for this guide block? The guide block is made from S45C medium‑carbon steel, which provides a reliable balance of strength and machinability for workshop use. Is the block compatible with standard T‑slots? Yes, the block is designed for a M6 T‑slot, allowing straightforward installation on most standard tables and rails. How many pieces are included in one set? One set contains 4 pieces, supplied for simultaneous mounting or as matched replacements for multiple rail points. What are the exact dimensions and weight of the part? The block measures 18×20×16 mm and weighs approximately 0.12 kg, suitable for compact fixturing requirements. Who manufactures this guide block and what is the SKU? The part is manufactured by Vertex and is listed under SKU 18TO14, commonly used for guide rail clamping applications. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
18x20x16mm Block for Guide Rail, T-Slot M6, S45C Steel, Set of 4 - Vertex
Compact support offering robust durability thanks to S45C construction and precise 18×20×16 mm dimensions; supplied as a set of 4 with an M6 T-slot for secure mounting and even load distribution. Order the components directly via Metav Werkzeuge or ask our consultants for technical compatibility and assembly advice. Block for Guide Rail – Vertex precision steel block with M6 T-slot A Block for Guide Rail designed as a compact support block for linear guide rails, providing stable positioning and straightforward integration into workshop and machine setups. Compact 18×20×16 mm design Made from S45C steel Supplied as set of 4 M6 T-slot for secure mounting Reliable, compact support that keeps assemblies aligned The support block is engineered to deliver repeatable positioning in limited spaces: its 18×20×16 mm footprint provides a stable contact area while keeping the overall assembly compact. Manufactured from S45C, a medium carbon steel known for good strength and machinability, the component offers enhanced rigidity compared with softer steels. This rigidity translates into reduced vibration and improved component life when used in guide-rail arrangements. The combination of compact form and material choice benefits production environments where space is at a premium but accuracy cannot be compromised. Secure mounting that speeds up assembly and reduces setup time Mounting is simplified by the M6 T-slot interface, a widely used standard that allows fast fixation with common T-nuts and cap screws. Supplied as a set of 4, the blocks permit balanced support across a rail, distributing loads and reducing the need for frequent re‑adjustment. The standardised thread and slot format help to shorten changeover times on jigs and fixtures, making the module a practical choice for both prototyping and serial production. The design focuses on ease of integration, saving labour hours during assembly and maintenance. Durable build for everyday workshop and machine use The block’s material and compact geometry were chosen to withstand the demands of routine machining and handling. Weighing approximately 0.13 kg, each unit is light enough for easy positioning yet substantial enough to provide stable support under typical operational loads. The plain, robust construction minimises potential failure points and eases inspection and replacement processes. As a Vertex-manufactured component, the block benefits from consistent production standards, supporting predictable inventory turnover and reliable performance across multiple production cycles. How the component supports an efficient workflow Using standardised, precision components reduces complexity in stock management and tooling changes. The block’s compatibility with common T-slot systems and its small footprint allow multiple configurations without custom machining, which lowers downtime and keeps throughput steady. Selecting standardised support blocks contributes to a clearer workflow, fewer bespoke parts, and faster reaction to design changes—practical advantages that directly support industrial efficiency and cost-effective operations. Contact Metav Werkzeuge for Vertex components and expert guidance on compatibility, batch requirements and technical selection to streamline integration into existing guide-rail systems Technical data Article number: 18TO16 GTIN: 4061905092589 SKU: 18TO16 Core specifications Dimensions: 18×20×16 mm Weight: 0.13 kg Pieces per set: 4 Materials & features Material: S45C Mounting interface: M6 T-slot Supplied as set: Yes FAQ What material is the block made from? The block is manufactured from S45C medium carbon steel; Vertex applies standard production controls to ensure material consistency. What are the exact dimensions of the support block? Dimensions are 18×20×16 mm, which suits compact guide-rail assemblies and constrained installation spaces. How is the block mounted to a guide rail? Mounting is via an M6 T-slot, compatible with common T-nuts and M6 fasteners for secure fixation and easy assembly. Is the item supplied individually or as a set? The product is supplied as a set of 4, enabling balanced support and simplified installation across a rail. Which applications are suitable for this block? The block is intended for linear guide support in machine and workshop fixtures where compact, repeatable positioning is required. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
18x20x16mm Block for Guide Rail, T-Slot M6, Set of 4 - Vertex
Robust, compact guide-rail blocks made from S45C combine material strength with simple mounting via an M6 T‑nut; the four-piece set ensures consistent alignment across short linear runs. Order the units directly via Metav Werkzeuge or consult the Metav advisors for application-specific recommendations. Block for guide rail — compact S45C guide block with M6 T‑nut (Vertex) The Block for guide rail is a compact guide-block designed for precise mounting and alignment in short linear guide systems and machine fixturing applications. Compact 18 × 20 × 16 mm profile Made from S45C medium carbon steel Compatible with M6 T‑nut mounting Supplied as a 4‑piece set Secure alignment where space is limited Small assemblies benefit from components that provide stable positioning without bulk. The compact profile and exact 18 × 20 × 16 mm dimensions keep the footprint minimal while enabling precision positioning in constrained fixtures. Thanks to its low profile, the block is suitable for close-clearance setups where every millimetre counts, reducing the need for larger support structures and simplifying layout planning. Durable steel construction for repeatable results Manufactured from S45C, the block offers a balance between strength and machinability that is well established in industrial environments. This material choice supports consistent mechanical behaviour under normal workshop conditions and helps maintain geometry over repeated cycles. The result is reliable, repeatable alignment that contributes to predictable assembly and reduced rework in production processes. Simple integration with standard T‑slot hardware Mounting and adjustment are straightforward thanks to the integrated M6 T‑nut compatibility, which allows direct attachment to common T‑slot and threaded fixtures. The component arrives as a 4‑piece set, enabling matched installation across multiple mounting points to ensure uniform clamping and alignment. This compatibility reduces planning time and speeds up assembly changes during maintenance or reconfiguration. Practical advantage for workshop and production use As a compact guide-block, the unit supports quick installation and easy replacement, making it a practical choice for jigs, fixtures and short guide runs. The combination of a proven steel grade, small form factor and metric T‑slot compatibility helps to lower setup time and maintain stable guides without overengineering. For operations seeking straightforward, robust components, the block provides a dependable mechanical interface. Contact Metav Werkzeuge in Emmerich for tailored advice on application and ordering of the Vertex guide block (SKU 16TO18); email info@metav-werkzeuge.com or call +49 2822 7131930 for prompt assistance Technical data SKU: 16TO18 GTIN: 4061905093593 Manufacturer: Vertex eClass: 23300402 Facts Dimensions: 18 × 20 × 16 mm Weight: 0.15 kg T‑slot/thread: M6 Pieces per set: 4 Special features Material: S45C Suitable for guide rails Supplied as a set Compact profile for confined assemblies FAQ What material is the block manufactured from? The block is made from S45C medium carbon steel, providing a balance of strength and machinability for workshop applications. Is the block ready for installation on standard T‑slot tables? Yes. The Vertex block accepts an M6 T‑nut and is designed for straightforward mounting to common T‑slot and threaded fixtures. How is the product supplied? The unit is supplied as a 4‑piece set (SKU 16TO18) to ensure matched mounting points and consistent alignment across installations. What are the exact dimensions and weight? The guide-block measures 18 × 20 × 16 mm and has a listed weight of 0.15 kg. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
18x20x16mm Mounting Block for Guide Rail, M5 T-Slot, S45C Steel, Set of 4 - Vertex
Take advantage of the combination of compact dimensions, durable S45C construction and secure M5 T‑nut fixing for reliable alignment in small fixtures; order the set directly via Metav Werkzeuge or consult our specialists for application advice. Guide rail block (14TO18) – S45C, M5 T‑nut, set of 4 by Vertex The Guide rail block is a compact clamping component designed for use with linear guide rails and small fixture assemblies in workshops and production jigs. Compact 18 × 20 × 16 mm footprint Manufactured from S45C carbon steel M5 T‑nut for secure fastening Supplied as a set of 4 pieces Secure, repeatable alignment for small fixtures The compact block delivers a consistent locating function where space is limited: its 18 × 20 × 16 mm profile minimises intrusion into assemblies while providing a stable contact face for rails and mating parts. The integrated M5 T‑nut allows a positive threaded connection in standard T‑slot systems, ensuring repeatable alignment under varying loads. For production contexts where fixture changeovers must be fast and precise, this component reduces setup time and contributes to process reliability. Robust material choice that supports machining and longevity Constructed from S45C, a medium carbon steel grade, the component offers a pragmatic balance between strength and machinability. That material choice allows finishing operations and minor custom machining if different contact geometries are required, while maintaining the mechanical integrity expected in clamping applications. Where fixtures are subject to repeated assembly cycles, the material's properties help to extend service life and lower lifecycle costs compared with softer alternatives. Compact set for modular assembly and easy replacement Supplied as a set of 4, the blocks simplify procurement for multi-point fixtures and modular jigs, avoiding the need to source individual items. The small mass (approx. 0.13 kg per set) and standardised thread interface make integration straightforward on machine tables and bespoke fixtures. Because the design focuses on function rather than ornament, the component serves well in production, maintenance and prototype settings where space economy and dependable clamping are priorities. Contact Metav Werkzeuge in Emmerich for ordering and technical matching of Vertex components—our specialists can advise on compatibility with existing guide rails and T‑slot systems via info@metav-werkzeuge.com or by phone Technical data SKU: 14TO18 GTIN: 4061905093586 Manufacturer: Vertex Dimensions: 18 × 20 × 16 mm Weight: 0.13 kg Pieces per set: 4 T‑nut thread: M5 ECLASS: 23300402 Material: S45C Application: for guide rails Set: yes, as delivered Brand: Vertex FAQ What thread size does the block use for attachment? The block uses an M5 T‑nut interface for fastening, allowing direct mounting into standard M5 T‑slot systems. Is the component suitable for use in modular fixtures and jigs? Yes, the Vertex guide rail block (SKU 14TO18) is supplied as a set of 4, making it suitable for multi-point modular assemblies and quick replacements. What material is the block made from and what does that mean for durability? The blocks are made from S45C carbon steel; this provides good strength and enables finishing or minor machining, supporting long‑term durability in workshop environments. Can the block be modified to fit bespoke assemblies? Given the S45C material and the compact form factor, minor machining or finishing operations are feasible to adapt the component for custom contact geometries; compatibility with the M5 T‑nut should be maintained. How many pieces are included and what is the typical use case? Delivery is in a set of 4 pieces; typical use cases include small guide rail supports, locating points in jigs and compact fixture assemblies. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
18x22x12mm Block for Guide Rail With T-Slot M6, S45C Steel, Set of 4 - Vertex
A compact mounting solution engineered for secure rail alignment: the combination of durable S45C material, a space-saving 18 × 22 × 12 mm footprint and M6 T-slot compatibility ensures reliable fixture performance and simple integration into existing setups. Order the Block for guide rail »18TO18« directly via Metav Werkzeuge or ask our consultants if needed. Block for guide rail »18TO18« – Vertex mounting block with S45C, M6 T-slot A Block for guide rail »18TO18« engineered as a compact mounting block for guide-rail fixtures, suitable for small-format assemblies and modular clamping systems Solid S45C construction for durable use M6 T-slot compatibility for standard fixtures Compact 18 × 22 × 12 mm footprint Supplied as a set of 4 pieces Secure support for guide rails that reduces setup variance Made from S45C, this mounting block provides a reliable balance of strength and machinability, making it suitable where repetitive positioning is required. The medium-carbon steel construction offers predictable mechanical behaviour during clamping and light machining operations, which translates to consistent alignment over repeated setups. By choosing a compact steel block rather than softer materials, the risk of deformation under standard fixture loads is reduced, supporting process stability in production and workshop environments. Space-saving dimensions that simplify layout planning The 18 × 22 × 12 mm footprint is designed for installations where compactness matters without compromising positional control. Its small form factor allows multiple blocks to be positioned close together along a guide rail, enabling fine adjustment of supported components and more efficient use of bench or machine bed space. The clear, standardised dimensions also simplify CAD planning and spare-part management, allowing technical teams to incorporate the block into existing assemblies with minimal adaptation. Standard interface and kit format for fast integration Compatibility with an M6 T-slot ensures the block can be used with common clamping rails and fixtures, reducing the need for bespoke adaptors. Supplied as a set of 4, the kit supports multi-point support strategies and makes it straightforward to standardise a workstation or small production cell. Each block weighs approximately 0.13 kg, which keeps handling simple during assembly and lowers the risk of overloading delicate jigs. The combination of a standard thread interface and modular quantity makes the product practical for recurring setups and quick replacements. For Vertex guide-rail solutions like the 18TO18 mounting block, contact Metav Werkzeuge in Emmerich for tailored advice and supply details – info@metav-werkzeuge.com • +49 2822 7131930 Technical data Article number: 18TO18 GTIN: 4061905090882 ECLASS: 23300402 Brand: Vertex Designation: Block for guide rail Facts Dimensions: 18 × 22 × 12 mm Weight: 0.13 kg T-slot: M6 Pieces per set: 4 Set supplied: yes Special features Material: S45C Intended use: for guide rails Compact mounting block design FAQ What material is the block made from? The block is manufactured from S45C medium-carbon steel; this provides a durable, machinable material that suits repeated clamping and fixture use for the Block for guide rail »18TO18«. What size and interface does the block use? Dimensions are 18 × 22 × 12 mm and the block is compatible with an M6 T-slot, allowing integration with standard guide-rail clamping systems and common fixture rails. Is the product supplied as a single item or a kit? The product is supplied as a set of 4 pieces, enabling multi-point support strategies; the set is sold under SKU 18TO18 by Vertex. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
18x42x23mm T-Slot Clamping Jaws Set, 4 Pieces - Vertex
Compact, repeatable clamping for T-slot tables: the compact dimensions and the set composition allow flexible fixturing with minimal interference. Benefit from stable workholding provided by a set of four, compact T-slot clamping jaws, and order or consult via Metav Werkzeuge for rapid supply from Emmerich. Vertex T-slot clamping jaws (CK-3712) – compact 18×42×23 mm, set of 4 A Vertex T-slot clamping jaw set engineered to secure workpieces on T-slot tables for milling, drilling and general workholding applications. Compact 18 x 42 x 23 mm design Set of 4 for versatile fixturing Total weight 0.6 kg for stable clamping Consistent, compact workholding that reduces setup time The set of 4 compact clamping jaws delivers a pragmatic solution for fixtures where space is limited and repeatability matters. With nominal dimensions of 18×42×23 mm, these components occupy minimal table area while providing defined contact points for accurate positioning. The compact profile reduces collision risk with rotating tools and enables closer approach in multi-axis setups, which contributes directly to shorter batch cycle times and fewer manual adjustments. Compatibility with standard T-slot tables allows integration into existing fixturing concepts without the need for custom adapters. Reliable stability for repeatable machining results Designed for steady contact and predictable behaviour, the jaws offer a balance between low bulk and effective clamping force. The modest total mass of 0.6 kg for the set improves the inertial stability of the clamping assembly while keeping handling straightforward during setup changes. By ensuring consistent seating and minimal movement under cut loads, the components support repeatability across consecutive workpieces, which aids quality control and reduces scrap rates. The CK-3712 SKU is particularly useful where repeatable datum points and reliable clamping are required in serial production or precision repair tasks. Flexible fixture design for varied workshop demands Supplied as a matched set, the jaws simplify layout choices: mixtures of pairs and single units can be combined to create bespoke vice arrangements, stepped clamps or multi-point fixtures. The compact profile makes the parts suitable for close-tolerance clamping on small assemblies and for use as auxiliary clamps in larger setups. Material-specific guidance and maximum clamping forces are determined by the parent fixturing components and machine capabilities; the modular nature of the pieces focuses effort on optimal placement rather than on part-specific hardware. Availability from a specialised supplier streamlines procurement and ensures consistent replacements when scaling up. Contact Metav Werkzeuge for personalised advice, stock availability and fast supply from our Emmerich warehouse to integrate the Vertex CK-3712 T-slot clamping jaw set into existing fixturing workflows Technical Data Article number: CK-3712 GTIN: 4061905085017 Manufacturer: Vertex Data Dimensions: 18 x 42 x 23 mm Weight: 0.6 kg Pieces per set: 4 Special features For T-slot clamping applications Supplied as a matched set of four Compact design for reduced tool interference FAQ What tables are these clamping jaws compatible with? The Vertex T-slot clamping jaw set CK-3712 is designed for standard T-slot tables and can be incorporated into typical milling, drilling and general workholding fixtures. How many pieces are included in one delivery unit? One set contains four clamping jaws; this composition simplifies multi-point fixturing and modular clamping strategies. Are the dimensions suitable for tight fixtures? Yes, the compact 18×42×23 mm footprint of the CK-3712 makes these jaws suitable for tight layouts where minimal interference with tools is required. Does the product ensure repeatable clamping across batches? When installed and tightened consistently, the Vertex clamping jaws provide stable contact and contribute to repeatable positioning and consistent machining results. Can these jaws be used as part of a customised fixture? The matched set format allows flexible combinations—pairs or individual pieces can be arranged to form custom fixtures aligned to the workpiece geometry. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
18x60x150mm T-Slot Table Plate M12x1.75 Thread, SS41C Steel - Vertex
Take advantage of the combination of compact dimensions, robust SS41C steel construction and a standard M12 x 1.75P threaded connection for secure, repeatable clamping and fixture set-ups; order directly via Metav Werkzeuge or consult our specialists for application advice. TP-150-18 T-slot plate — Vertex, M12 threaded, 18 x 60 x 150 mm The TP-150-18 T-slot plate is a compact clamping plate for machine tables and fixture assemblies, designed for precise positioning and secure attachment in confined workspaces. SS41C steel construction M12 x 1.75P threaded connection Compact 18 x 60 x 150 mm footprint Precise clamping in limited space The compact footprint of this T-slot plate (measuring 18 x 60 x 150 mm) delivers reliable clamping without occupying excessive table area. The engineered geometry ensures consistent contact with T-slots and fixture rails, reducing lateral play and supporting reproducible set-ups. The inclusion of a standard M12 x 1.75P thread enables direct integration with common clamping hardware, which shortens set-up time and improves overall machining throughput. One clear advantage is reduced fixture complexity: fewer intermediary adapters are required, so changeover processes become more efficient. Simple mounting and compatible interfaces Mounting a T-slot plate should be straightforward; the M12 x 1.75P thread conforms to widely used machine accessories and clamping studs. The term "T-slot plate" refers to a plate designed to engage with T-slots on machine tables or workbenches, allowing secure fixation using studs or bolts. Because the connection follows standard dimensions, retrofitting into existing jigs or tables is uncomplicated. The result is a dependable mechanical interface that supports repeatable setups and minimises downtime during production changes. Durable material for predictable performance Constructed from SS41C steel, this plate offers robust mechanical stability for everyday shop use while remaining straightforward to machine or finish if modifications are needed. With a net weight of 1.3 kg, handling is practical during installation yet substantial enough to resist movement under load. The material choice provides consistent mechanical behaviour under clamping forces, which helps maintain alignment and surface contact over repeated cycles. Supplied by a recognised manufacturer, the component supports industrial workflows that demand reproducibility and low-maintenance operation. Contact Metav Werkzeuge to discuss how the Vertex TP-150-18 T-slot plate fits into existing clamping systems or to request a tailored quotation from our Emmerich-based team. Technical data Article number: TP-150-18 GTIN: 4061905095191 Manufacturer: Vertex Facts Dimensions: 18 x 60 x 150 mm Weight: 1.3 kg Thread: M12 x 1.75P Special features Material: SS41C eClass: 23360290 SKU: TP-150-18 FAQ What types of machine tables is this plate compatible with? The TP-150-18 T-slot plate is intended for use with standard T-slot machine tables and fixture rails; the M12 x 1.75P thread ensures compatibility with common studs and clamping hardware. Can the plate be modified or machined for bespoke applications? Yes, the SS41C construction of the TP-150-18 permits secondary machining or minor modifications; standard workshop practices apply when altering structural steel components. How does the TP-150-18 improve set-up repeatability? By providing a compact, rigid interface that engages the table T-slot and secures with an M12 x 1.75P connection, the plate reduces lateral play and supports repeatable positioning across production runs. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
18x60x90mm T-Slot Table Plate M12x1.75, SS41C - Vertex
Take advantage of a compact T‑slot plate that combines robust SS41C steel construction with standard M12‑thread compatibility for reliable fixturing in small benches and jig setups; order directly via Metav Werkzeuge or consult the Metav team for application advice. Vertex TP-90-18 T‑slot plate – M12 threaded, SS41C steel The TP-90-18 is a compact T‑slot plate designed for precise workholding and fixture assembly in general workshop and light industrial settings M12 x 1.75 threaded interface Durable SS41C steel construction Compact 18 × 60 × 90 mm footprint Secure clamping with standard threaded interface The T‑slot geometry paired with a M12 x 1.75 threaded interface enables straightforward integration with common clamping elements and fasteners. The threaded arrangement translates into repeatable mounting and simple repositioning, reducing setup time and improving throughput on small series jobs. With a focus on mechanical reliability, the plated surface and connection points deliver consistent alignment for jigs and fixtures while maintaining straightforward compatibility with industry‑standard hardware. Small footprint, high flexibility for tight spaces Measuring 18 x 60 x 90 mm and weighing 0.76 kg, this compact plate is suited to workbenches, inspection tables and modular fixture systems where space is limited. The reduced footprint allows multiple plates to be grouped for custom layouts without sacrificing rigidity, making the component an efficient choice for bespoke fixturing. The precise outer dimensions also ease repeatable positioning in setups that require quick changes between operations. Robust material choice for workshop use Manufactured from SS41C structural steel, the plate offers dependable strength for everyday mechanical loads common in clamping and fixturing tasks. The material selection supports general workshop applications and provides a stable base for machining jigs, assembly fixtures and test rigs. Where corrosion resistance or specialised coatings are required, the plain steel base permits later surface treatments to match specific environmental needs without compromising the core mechanical properties. Designed for practical workholding and repeatability This plate is an economical solution for workshops that prioritise consistent fixturing and fast changeovers. The combination of standard threading and a compact form factor supports modularity: plates can be repositioned, combined or replaced to suit varying production runs. The component contributes to improved process reliability by simplifying alignment and reducing variables introduced by ad‑hoc fixtures, making it valuable for maintenance, prototyping and small‑batch production. For ordering, bespoke advice or to check compatibility with existing clamps and fixtures, contact Metav Werkzeuge in Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930 for prompt, expert support Technical data Article number: TP-90-18 GTIN: 4061905083709 SKU: TP-90-18 Facts Dimensions: 18 x 60 x 90 mm Weight: 0.76 kg Thread: M12 x 1.75 Special features Material: SS41C steel Category: Vertex T‑slot plate Image assets available FAQ What thread specification does the plate use? The plate is supplied with an M12 x 1.75 threaded interface, suitable for standard M12 clamping hardware and fasteners for modular fixturing. What material is the plate made from? The component is manufactured from SS41C structural steel, providing a robust base for workshop fixturing and assembly tasks. What are the exact dimensions and weight of the plate? Dimensions are 18 x 60 x 90 mm with a mass of 0.76 kg, making the TP-90-18 compact and easy to integrate into small benches and modular setups. Which applications suit this T‑slot plate? The plate is ideal for small series workholding, jigs, test rigs and fixture systems where standard threaded attachment and a compact footprint are required; the Vertex TP-90-18 offers repeatable mounting for such tasks. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
19.1mm Button Magnet With Split Holding Face And Through Hole, 19 N Holding Force, AlNiCo 500 - TECWERK
The combination of heat-resistant AlNiCo 500 alloy and a reliable 19 N holding force delivers consistent performance for high-temperature fastening tasks; the integrated 4.8 mm through-hole and split contact surface ensure secure, simple mounting. Order the component directly via Metav Werkzeuge or consult our specialists for application advice. Button magnet D19.1 x H12.7 mm with split contact surface, 19 N – TECWERK button magnet D19.1 x H12.7 mm designed for high-temperature holding and straightforward screw mounting in fixtures and assembly jigs AlNiCo 500 for stable magnetic performance Split contact surface for flexible attachment 4.8 mm through-hole for easy fastening Withstands up to 450 °C operating temperature Precise magnetic performance for hot processes Made from AlNiCo 500, this small yet robust component provides a steady magnetic field where thermal stability is required. The material choice explains the magnet’s ability to maintain attraction at elevated temperatures, with a rated 450 °C maximum operating temperature. The 19 N holding force is a measured indication of how securely the part will retain ferrous items under normal workshop conditions, making it suitable for fixture points that must resist displacement during handling or light machining operations. This predictability reduces rework and supports a smoother production flow. Simple, secure mounting for repeatable positioning The combination of a split contact surface and a centred 4.8 mm through-hole enables versatile fastening options: the through-hole permits screw mounting for permanent or semi-permanent installations, while the divided contact face improves grip on uneven or slightly curved substrates. This design minimises lateral movement and simplifies alignment when used in jigs, holding fixtures or assembly aids. For engineers seeking reliable repeatability, the mechanical fixing option complements the magnetic retention and reduces reliance on adhesive or complex clamping. Process-ready durability and coating tolerance The magnet is specified with a lacquer-bake tolerance of 200 °C, allowing integration into assemblies that undergo standard paint or coating cycles without degrading magnetic properties. The construction resists common workshop stresses and thermal exposure associated with many finishing operations. Supplied in a practical packaging unit of 10, the component supports small-batch replenishment and organised inventory control in production environments where consistent part performance is essential. Trusted sourcing and technical backing for industrial use Sourcing precision components from a reliable partner reduces procurement risk and shortens lead times for production teams. Metav combines broad stock availability with technical expertise to help define suitable mounting strategies and material pairings for demanding applications. If design integration or material compatibility questions arise during planning, technical advisors can clarify assembly implications and suggest optimal use cases for the magnet while keeping delivery dependable and traceable. Contact Metav Werkzeuge for technical guidance and to secure TECWERK button magnets from stock in Emmerich; specialists are available via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 4000832266NW SKU: 4000832266NW Product type: Button magnet Manufacturer: TECWERK Facts Diameter: 19.1 mm Height: 12.7 mm Through-hole diameter: 4.8 mm Holding force: 19 N Maximum operating temperature: 450 °C Lacquer bake temperature: 200 °C Packaging unit: 10 Special features Material: AlNiCo 500 With split contact surface and through-hole Suitable for screw fastening Compact button-style housing FAQ What is the maximum temperature at which this magnet can be used? The TECWERK button magnet is rated for use up to 450 °C, making it suitable for high-temperature fixture applications. How is the magnet fastened in assemblies? Fastening is possible via the 4.8 mm through-hole for screw mounting; the split contact surface supports improved grip in fixed positions. What holding capacity can be expected from this component? The part provides a 19 N holding force, which is appropriate for securing small ferrous parts in jigs and light assembly tasks. Which material is the magnet made of and why is it relevant? The magnet is manufactured from AlNiCo 500, chosen for its thermal stability and consistent magnetic performance at elevated temperatures. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
19.1mm Flat Pot Magnet With Through Hole And Countersink, 30 N Holding Force, AlNiCo 500 - TECWERK
Combine compact design with reliable high-temperature performance: the AlNiCo 500 pot magnet offers a secure 30 N hold and a countersunk through hole for straightforward screw mounting; order the unit directly via Metav Werkzeuge or consult our specialists for application advice. Flat countersunk pot magnet D19.1 mm H7.5 mm with through hole, holding force 30 N – TECWERK The flat countersunk pot magnet D19.1 H7.5 is a compact AlNiCo 500 cup magnet designed for secure, high-temperature fastening in jigs, fixtures and light assembly tasks AlNiCo 500 alloy for high-temperature use Countersunk through hole, bore Ø 3.7 mm Compact Ø 19.1 mm × H 7.5 mm design Holding force 30 N for secure attachment High-temperature stability for reliable fixing The core advantage of this component is its AlNiCo 500 construction, which provides stable magnetic properties at elevated temperatures up to 450 °C. For applications involving heat or proximity to baking processes, the magnet maintains performance where many ferrite or rare-earth magnets would demagnetise. The 30 N retention force supplies a predictable, repeatable hold for light securing and positioning tasks, making the component suitable for small fixtures and temporary jigs in production environments. This section focuses on measurable performance and explains why material choice matters for thermal resilience. Small footprint for precise positioning in assemblies With an external diameter of Ø 19.1 mm and a height of 7.5 mm, the unit occupies minimal space while offering a flat contact face for reliable engagement. The Ø 3.7 mm central bore with countersink permits recessed screw mounting so fasteners sit flush, reducing profile interference and improving repeatability when used in alignment or locating applications. The compact geometry supports integration into tight assemblies and tool stations where minimal disturbance of adjacent components is important. Practical benefits include easier handling in confined jigs and stable placement during repetitive operations. Practical mounting and production considerations The magnet is supplied in packaging unit: 10 and is executed with through hole and countersink to suit conventional countersunk screw fixation. During component manufacture, the magnet’s coating processes can be exposed to a baking stage up to 200 °C, as indicated by production parameters; this is relevant for bespoke surface treatments or assembly steps that involve elevated temperatures. For installation, select a countersunk screw that matches the 3.7 mm bore and the desired clamping torque, and avoid impacts that could impair the magnet’s seating. The combination of compact form and a recessed fixing point streamlines assembly workflows without compromising hold. Contact Metav Werkzeuge for tailored advice on integrating this TECWERK pot magnet into specific fixtures and to arrange delivery or technical consultation at our Emmerich centre Technical data Article number: 4000832270NW UID: 4000832270NW Manufacturer: TECWERK Product type: Flat countersunk pot magnet Dimensions & performance Diameter: 19.1 mm Height: 7.5 mm Bore diameter: 3.7 mm Holding force: 30 N Max operating temperature (magnet): 450 °C Coating bake temperature: 200 °C Materials & features Material: AlNiCo 500 Execution: with through hole and countersink Packaging unit: 10 Label: Flachtopfmagnet D.19,1mm H.7,5mm m.Durchgangsbohrung Haftkraft 30 N BELOH FAQ What material is the magnet made from and why does it matter? The magnet is produced from AlNiCo 500, chosen for its thermal stability and predictable magnetic performance at elevated temperatures, which makes the flat countersunk pot magnet D19.1 H7.5 suitable for heated environments. What holding capacity can be expected from this cup magnet? The device provides a holding force of 30 N, offering a reliable grip for light securing and positioning tasks in fixtures and small assemblies using the TECWERK flat countersunk pot magnet (SKU 4000832270NW). How is the magnet mounted in an application? Mounting is via the central Ø 3.7 mm through hole with countersink so a countersunk screw sits flush, ensuring a low profile and repeatable fixing when used in jigs or tooling. Are there any temperature limits for use or processing? The magnet maintains magnetic properties up to 450 °C; manufacturing or coating processes may include a baking stage up to 200 °C, which should be considered during component processing. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
190mm 90° Rotary Head For Milling Machines, Max 2000 rpm, NT40 Spindle - Vertex
Take advantage of a robust 90° angle head with a 190 mm external diameter and a stable 18 kg construction to keep large-diameter machining precise and controlled. With an operating limit of 2000 r.p.m., the unit suits high-torque, low-speed drilling and milling tasks; order the head directly via Metav Werkzeuge or consult the Metav specialists for application advice. VRA-NT40 Angle Head (90°) – 190 mm, up to 2000 r.p.m., Vertex The VRA-NT40 Angle Head (90°) is an angle-mounted machining head designed for drilling and milling operations where larger diameters and stable tool engagement are required in production workshops and machine shops. 190 mm external diameter Up to 2000 r.p.m. operating speed Robust 18 kg construction for stability Compatible with common drill-head diameters Stable mounting for heavier operations A larger external diameter and a hefty build translate into reduced vibration and improved tool life during demanding tasks. The 190 mm outer dimension gives the unit a broad support footprint, while the 18 kg mass increases inertia for smoother cutting under load. For production environments where runout and chatter directly affect cycle time, this configuration provides mechanical stability that lowers scrap rates and reduces rework. The unit is therefore suitable where consistent surface quality and repeatability matter. Controlled speed optimised for large-diameter tooling The prescribed maximum of 2000 r.p.m. is deliberate: large-diameter heads and heavy cutting forces favour torque over high surface speed. Operating at controlled revs reduces thermal stress on cutting edges and minimises centrifugal load on bearings, which prolongs service intervals. Compatibility with a range of drill-head sizes—listed as compatible drill-head diameters: 85.725 / 100 / 105 / 110 / 115 mm—allows selection of tooling matched to the process, facilitating efficient material removal while maintaining dimensional integrity. Straightforward integration and predictable set-up Designed for workshop integration, the unit simplifies fixturing and repeatable set-up. Clear dimensional data and the robust construction speed up alignment and clamping routines, which shortens preparation time between jobs. The VRA-NT40 designation aids procurement and documentation; paired with the manufacturer's specifications, it supports predictable machine integration and easier spare-part planning. For complex multi-head arrangements or retrofit projects, the angle head reduces the need for elaborate custom fixturing thanks to its stable geometry. Built for industrial use and supported through Metav Manufactured by Vertex, the angled configuration addresses routine industrial needs for stable, precise 90° machining. The combination of controlled speed, sturdy construction and compatibility with standard drill-head sizes makes this head a practical choice for metalworking shops aiming to increase throughput without sacrificing accuracy. Backed by Metav Werkzeuge’s promise of accessible precision and reliable supply, the unit fits into a broader strategy of quality-focused, cost-effective procurement. For tailored advice on specifying Vertex angle heads or to secure the VRA-NT40 through Metav Werkzeuge in Emmerich, contact Metav’s technical team at info@metav-werkzeuge.com or call +49 2822 7131930 — technical consultants are available to assist with application compatibility and ordering. Technical Data Article number: VRA-NT40 GTIN: 4061905095238 Manufacturer: Vertex eClass: 21019290 Designation: Head Variant: 90° Facts External diameter: 190 mm Maximum speed: 2000 r.p.m. Weight: 18 kg Special features Compatible drill-head diameters: 85.725 / 100 / 105 / 110 / 115 mm Angle-mounted configuration (90°) Image assets available for inspection FAQ What is the maximum rotational speed for this angle head? The VRA-NT40 by Vertex is rated for up to 2000 r.p.m., a limit chosen to balance torque and bearing life for large-diameter tooling. Which drill-head diameters can be fitted to the unit? The unit supports compatible drill-head diameters: 85.725 / 100 / 105 / 110 / 115 mm, permitting selection of tooling to match the machining task. How does the weight affect machining performance? At 18 kg, the head adds inertia that reduces vibration and improves stability during heavy cuts, which benefits surface finish and tool life. Is the 90° configuration suitable for retrofit on existing machines? The angle-mounted design is intended for integration in production and workshop settings; consult Metav Werkzeuge with machine details to confirm compatibility and mounting requirements. Who manufactures the angle head and where can more technical documentation be obtained? The head is manufactured by Vertex; detailed specifications and drawings can be requested via Metav Werkzeuge for engineering evaluation. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
190mm Drawbar For Tool Taper DIN 317 For Morse Taper MK3 - TECWERK
Reliable removal of MT3 tapers with a standards-based design: DIN 317 conformity and a 190 mm overall length ensure consistent extraction performance and workshop compatibility; order directly via Metav Werkzeuge or consult our specialists for application advice. Extractor DIN 317 for Morse taper MT3 — TECWERK, 190 mm overall length The Extractor DIN 317 for Morse taper MT3 is a purpose-built taper extractor for the safe and efficient removal of MT3 tool tapers in general machining and workshop environments. Conforms to DIN 317 For Morse taper MT3 Overall length 190 mm Fits standard tool tapers Faster, standard-compliant extraction for workshop efficiency Conformity to DIN 317 guarantees a predictable fit with tool tapers made to recognised standards, reducing downtime caused by seized or difficult-to-remove tapers. The standardised design supports consistent engagement with Morse taper MT3 connections, helping to streamline removal cycles and avoid ad‑hoc improvised methods. By relying on a purpose-made extractor, workshops benefit from a straightforward, repeatable process that complements existing tooling workflows and minimises the risk of incidental damage to the taper or holder. Compact length and design improve accessibility and handling With an overall length of 190 mm, this taper extractor provides sufficient reach for most benches and machine setups without excess bulk. The length balances access to deeper-seated tapers while remaining manageable for manual handling, making removal operations quicker and less awkward. The tool’s geometry is intended to mate with common tool taper interfaces, supporting quick seating and withdrawal actions that limit operator effort and contribute to safer, more controlled handling during maintenance or tool changes. Clear compatibility and guidance for safe use The product is specified for Morse taper MT3 applications and references compatibility with tool tapers to DIN 228, so selection is straightforward for those working with standardised spindles and toolholders. For users less familiar with taper systems: a Morse taper is a conical connection that transfers torque and centres tooling by friction; an extractor applies axial force to disengage the taper without levering against the spindle. Regular cleaning of the taper contact surfaces and careful alignment of the extractor prior to use minimise the likelihood of jamming and preserve the integrity of mating surfaces for dependable service life. For a standards-compliant TECWERK taper extractor and expert application advice, contact Metav Werkzeuge in Emmerich for prompt supply and technical consultation via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 4000832762NW Standard: DIN 317 Overall length: 190 mm Suitable for: Morse taper MT3 Packaging unit: 1 Core data Total length: 190 mm Packaging unit: 1 Special features Conforms to DIN 317 For tool tapers to DIN 228 Fits standard tool tapers Intended for Morse taper MT3 FAQ Which taper sizes is this extractor intended for? The extractor is specified for Morse taper MT3 applications and is designed to work with standard tool tapers produced to DIN 228. Is the extractor compliant with recognised standards? Yes; the tool conforms to DIN 317, ensuring compatibility with standardised taper interfaces and predictable engagement behaviour. Can this extractor be used with other Morse taper sizes? The extractor is intended for Morse taper MT3; use with other Morse sizes is not guaranteed and should only be attempted if compatibility is verified by measurement or manufacturer guidance. How should the extractor be maintained? Keep the taper contact surfaces clean and free of swarf and lubricants, store the extractor dry, and inspect for deformation before use to maintain reliable operation. What is the exact length of the extractor? The taper extractor has an overall length of 190 mm, providing balanced reach for common workshop setups. Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund
190mm Switchable Permanent Magnet 110x110mm Holding Surface 12kg Capacity - TECWERK
Take advantage of the combination of a switchable magnetic function, a compact 110 x 110 mm holding surface and reliable 12 kg lifting capacity for faster set-ups and repeatable positioning—order directly via Metav Werkzeuge or consult the team for application advice. Permanent magnet L110 x 110 x 190 mm, switchable – TECWERK magnetic lifter with 110 x 110 mm holding face and 12 kg capacity Permanent magnet L110 x 110 x 190 mm is a compact, switchable magnetic lifter designed for secure holding and simple on/off operation in metalworking and assembly applications. Switchable magnetic operation for fast clamping Holding surface 110 x 110 mm Max lifting capacity 12 kg Compact height 190 mm, portable at 2.4 kg Faster set-ups with mechanically switchable magnetic holding A switchable magnet removes the need for repeated mechanical clamping when processing small steel parts. The mechanical on/off mechanism delivers immediate activation and reliable release without tools or power supply, which speeds repetitive tasks and reduces cycle times. With a defined holding surface of 110 x 110 mm and a clear maximum lifting capacity of 12 kg, the device offers predictable performance for fixturing, positioning and light lifting tasks. This predictability increases throughput and reduces set-up errors in routine production steps. Compact form factor for tight workspaces and portable handling The compact overall height of 190 mm and a mass of 2.4 kg make the tool simple to manoeuvre and store between operations. A small footprint combined with a flat 110 x 110 mm contact face supports accurate placement on flat ferrous components and holds pieces steadily during drilling, tapping or assembly work. The lightweight design encourages ergonomic handling while still providing a secure magnetic interface, enabling rapid repositioning on benches, fixtures and jigs. Safe, energy-free operation that integrates into workshop workflows The purely mechanical switching function provides energy-free operation, eliminating reliance on batteries or mains power and reducing maintenance points. The magnet’s on/off control improves safety during part loading and unloading: magnets can be deactivated for removal and reactivated for subsequent process steps. For workshop integration, the device supports common manual and semi-automated workflows where reliable magnetic holding of ferrous materials is required, contributing to smoother work sequences and lower operator effort. Durable, low-maintenance solution for routine use Designed for straightforward handling rather than complex maintenance, the unit delivers long service life through simple mechanics rather than electronic complexity. The absence of electrical components minimises downtime and inspection requirements, providing a practical holding tool for everyday tasks. Combined with an intuitive on/off control and standardised contact dimensions, the product supports efficient stock management and predictable replacement cycles in busy production or repair environments. For reliable magnetic lifting from TECWERK, contact Metav Werkzeuge in Emmerich for tailored advice and secure procurement via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: 4000832303NW Product type: Permanent magnet Version: switchable Packaging unit: 1 Manufacturer: TECWERK Facts Total height: 190 mm Holding surface: 110 x 110 mm Maximum lifting capacity: 12 kg Weight: 2.4 kg Special features Switchable magnetic function (mechanical on/off) Compact footprint for limited space Energy-free operation Suitable for holding ferrous materials FAQ What is the maximum lifting capacity of this magnetic lifter? The Permanent magnet L110 x 110 x 190 mm has a maximum lifting capacity of 12 kg. How is the magnet switched on and off? The unit uses a mechanical switchable mechanism that activates and deactivates the magnetic field without power. Which materials can be held with this magnet? The device is intended for ferrous materials; non-ferrous metals such as aluminium will not be attracted. What are the key dimensions of the product? The lifter offers a holding face of 110 x 110 mm and a total height of 190 mm. Is the product portable for bench work? Yes, the compact design and weight of 2.4 kg make it suitable for portable use on workbenches and in small workshops. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
190mm Switchable Permanent Magnet 80x80mm Holding Surface 7kg Capacity - TECWERK
Take advantage of a switchable device with an 80 x 80 mm holding face and a compact footprint to speed handling of small ferrous parts; the magnetic on/off function and a 7 kg maximum lifting capacity ensure efficient, safe temporary clamping. Order the unit directly via Metav Werkzeuge or consult their specialists for application advice. TECWERK Switchable Permanent Magnet — 80 x 80 mm holding face, 7 kg capacity The TECWERK switchable permanent magnet provides temporary magnetic holding and lifting for small workshop and assembly tasks, combining controlled magnetic release with a compact form factor. Switchable on/off magnet Holding face 80 x 80 mm Max lifting capacity 7 kg Compact total height 190 mm Faster, more reliable temporary holding for small components The switchable mechanism provides immediate magnetic engagement and safe release without tools, reducing handling time and minimising the risk of part damage during repositioning. With a holding face of 80 x 80 mm and a rated 7 kg lifting capacity, the device is suited for a wide range of light assembly, trimming and positioning operations where controlled magnetic clamping improves throughput. The design supports repeatable placement, which helps maintain consistent process quality and reduces rework. Compact dimensions that optimise workstation layout A compact total height of 190 mm and a low mass of 1.4 kg make this unit easy to position and relocate across workbenches and fixtures, supporting flexible production setups. The reduced size allows integration into tight jigs and fixturing scenarios where space is limited, while the modest weight aids manual handling and ergonomic operation. The compact profile therefore contributes directly to smoother workflows and faster changeovers in small-batch or mixed-production environments. Durable function and uncomplicated operation for everyday use Built as a practical workshop tool, the permanent magnet delivers consistent magnetic holding with a simple on/off control that requires no external power source, lowering operating complexity. The robust form supports routine use in assembly and light fabrication contexts, and the straightforward switching reduces training requirements for staff. The combination of reliability and simplicity helps to maintain production continuity and supports measurable efficiency gains in repetitive holding tasks. For enquiries about the TECWERK switchable permanent magnet or to place an order through Metav Werkzeuge, please contact Metav Werkzeuge GmbH at info@metav-werkzeuge.com or call +49 2822 7131930 for specialist advice and fast supply. Technical Data Article number: 4000832302NW Product type: Permanent magnet Manufacturer: TECWERK Execution: switchable Facts Holding face: 80 x 80 mm Total height: 190 mm Weight: 1.4 kg Max lifting capacity: 7 kg Special features Switchable magnetic operation Compact design for small components Suitable for temporary clamping and lifting FAQ What is the maximum lifting capacity of this switchable unit? The TECWERK switchable permanent magnet (SKU 4000832302NW) has a maximum lifting capacity of 7 kg when applied on a suitable ferrous surface under recommended conditions. Which surface area provides the rated holding force? The rated holding force is specified for a flat 80 x 80 mm holding face; optimal contact between the magnet face and the part improves performance. Is any power source required to operate the magnetic switch? No external power is required; the magnetic on/off control is mechanical, enabling engagement and release without electricity. Can the magnet be used for positioning during light machining? Yes, the compact design and reliable magnetic holding make it appropriate for positioning and temporary clamping during light machining and assembly tasks. How portable is the device for use at different workstations? With a total height of 190 mm and a weight of 1.4 kg, the unit is lightweight and easy to move between workstations for flexible use. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
Secure components with reliable workpiece clamps
Workpiece clamps, also known as workholding clamps or workholding devices, form the essential mechanical interface between machine and part in industrial fabrication. They keep components absolutely play-free, positionally accurate and vibration-resistant during milling, turning, drilling or grinding.
How workpiece clamps ensure process stability
A correctly specified clamping concept transfers the high cutting and feed forces of modern CNC machines into the machine table or spindle without deforming the part. The right combination of mechanical, hydraulic, pneumatic or magnetic solutions enables fast, repeatable setups and supports automated part change where required. Typical applications range from single-part turning to high-volume series milling and complex five-axis machining.
Concrete production benefits at a glance
- repeatable positioning: reduces scrap and rework
- high clamping forces: withstands aggressive cutting without part movement
- reduced set-up time: modular systems and quick-change features speed throughput
- improved surface finish: vibration damping for finer results and tighter tolerances
- flexible compatibility: vices, chucks, clamping plates and zero-point systems for diverse geometries
Why Metav's range is the practical choice
Metav combines decades of specialist know-how with a broad, handpicked range that democratises precision for workshops and industry alike. Based in Emmerich, Metav acts as a quality filter for the European market and supplies more than 250,000 products from precision metrology to complete workshop equipment. With the trust of over 48,000 customers, Metav offers a single-source approach that reduces supplier complexity and secures dependable delivery to your workbench.
Technical data
- function: mechanical interface between machine and workpiece
- primary requirements: absolute positional accuracy; vibration reduction; high clamping forces
- technologies: mechanical, hydraulic, pneumatic, magnetic
- typical components: machine vices; chucks; clamping plates; zero-point systems; pratzen; clamping jaws
- application areas: milling; turning; drilling; grinding; automated part change systems
- production benefits: reduced set-up time; enhanced process security; optimised series and single-part production
The practical summary
Workpiece clamps bring the stability and repeatability required to meet tight tolerances and excellent surface quality, making them indispensable across machining operations. Choosing the right workholding clamps and modular workholding devices is a decisive step towards higher productivity and consistent part quality.
FAQ
What types of workpiece clamps are suitable for automated machining?
Workholding clamps with quick-change modules, hydraulic actuation or magnetic systems are commonly used for automated machining. These workholding devices enable fast, repeatable part changes and integrate with zero-point systems.
How do workpiece clamps affect surface finish and tolerances?
A stable clamping concept minimises vibration and part movement; this improves surface finish and supports achieving narrow tolerances when using high-precision workpiece clamps or workholding devices.
Can the same workpiece clamps handle different part geometries?
Modular workholding clamps and adaptable clamping jaws allow flexible fixturing for varied geometries; combining vices, clamping plates and pratzen increases versatility on the shopfloor.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com