Secure and precise workholding for metalworking productivity
Workholding devices such as workpiece clamps and chuck systems provide absolute positional stability and vibration damping during milling, turning, drilling and grinding, ensuring parts remain free of play under high CNC cutting and feed forces. By transferring clamping loads into the machine table or spindle without deforming the component, a well engineered workholding solution improves machining accuracy, surface finish and process reliability while reducing set-up times. Modular systems from machine vices and chucks to zero-point systems and specialised fixtures enable fast changeovers and support both serial and single-part production, delivering consistent clamping force, repeatability and enhanced throughput.
187mm BT-#40/BT-#50 Adapter Mounting Aid Horizontal And Vertical - Vertex
Benefit from a compact, heavy-duty assembly aid that combines stable footing, dual-orientation mounting and broad BT taper compatibility to speed setup and improve process reliability. Take advantage of the stable 238 × 305 mm base and the BT‑#50x1 / BT‑#40x1 adapter holder for flexible tooling arrangements. Order the VTD‑4 directly via Metav Werkzeuge or ask our consultants if needed. VTD‑4 Assembly aid — BT‑#50x1 / BT‑#40x1 adapter, horizontal & vertical The VTD‑4 is an assembly aid designed for horizontal and vertical mounting of BT‑taper toolholders, providing a stable platform for precise positioning and repeatable set‑ups. Sturdy base 238 x 305 mm Compatible with BT‑#50x1 and BT‑#40x1 tapers Designed for horizontal and vertical use Compact height 187 mm, weight 24 kg Stable positioning to reduce rework and downtime The main benefit of a substantial footplate is reliable stability during assembly and inspection tasks. With a 238 × 305 mm base and a mass of 24 kg, the fixture resists tipping and vibration, which reduces micro‑movement when inserting or removing toolholders. This stability translates directly into fewer alignment checks and lower scrap rates, helping workshops maintain throughput without adding complex fixturing. The compact 187 mm height keeps the work area accessible and simplifies transfer between bench and machine, while retaining a low centre of gravity for secure handling. Versatile taper compatibility for faster changeovers Equipped with an adapter holder that accepts BT‑#50x1 and BT‑#40x1 tapers, the device supports a wide range of toolholder sizes without the need for multiple dedicated fixtures. The receptacle for BT‑#40 interfaces smoothly with the adapter system, allowing two common taper standards to be accommodated on a single platform. This compatibility reduces tooling inventory and shortens changeover times, delivering clear productivity gains in mixed‑tool environments. For maintenance teams and toolroom staff, the adaptable design simplifies organisation and minimises the number of handling operations required. Horizontal and vertical orientation improves workflow flexibility A fixture that performs in both horizontal and vertical setups increases usable options on the shop floor. The orientation capability enables secure mounting for inspection, assembly and minor adjustment tasks, so the same device can serve multiple stages of the process. This flexibility supports lean workflow design: components and toolholders are prepared and verified in the most ergonomic position, avoiding unnecessary transfers. The result is a smoother process flow, improved ergonomics for operators and a reduced risk of incidental damage during handling. For robust, versatile assembly support rely on Vertex quality: contact Metav Werkzeuge in Emmerich for supply and application advice — our consultants are available by eMail, phone or WhatsApp to discuss fitment and delivery. Technical data SKU: VTD-4 GTIN: 4061905095870 Eclass: 21029203 Manufacturer: Vertex Facts Height: 187 mm Footprint: 238 x 305 mm Weight: 24 kg Special features Adapter holder for BT‑#50x1 and BT‑#40x1 Receptacle / interface: BT‑#40 Suitable for horizontal and vertical mounting Brand: Vertex FAQ What taper standards does the assembly aid accept? The assembly aid accepts both BT‑#50x1 and BT‑#40x1 tapers via the adapter holder supplied with the VTD‑4. Can the fixture be used in vertical orientation for tool inspection? Yes, the VTD‑4 is designed for both horizontal and vertical use to support inspection, assembly and minor adjustment tasks. What are the footprint and weight of the unit? The unit has a footplate of 238 × 305 mm and a mass of 24 kg, providing a stable base for handling and positioning. Is the receptacle compatible with standard BT‑#40 toolholders? The device includes a BT‑#40 receptacle and an adapter holder that also permits BT‑#50x1 compatibility for broader tooling coverage. Who manufactures the product and how is it identified? The product is manufactured by Vertex and sold as SKU VTD‑4; the GTIN is 4061905095870 for ordering and inventory purposes. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
187mm BT-#50/BT-#40 Adapter Mounting Aid Horizontal and Vertical, 238x305mm Base - Vertex
The combination of a BT-#50 spindle interface, a 238 x 305 mm stable base and a 24 kg mass results in reliable alignment and reduced vibration for repeatable assembly work; order the mounting aid directly via Metav Werkzeuge or consult our specialists for application advice. VTD-3 Mounting Aid — BT-#50 taper, horizontal & vertical mounting, Vertex A VTD-3 Mounting Aid designed for secure horizontal and vertical spindle mounting and accurate tool alignment on BT-#50 spindles Robust 238 x 305 mm base for stable setup Compatible with BT-#50 taper and BT-#40 adapter 187 mm working height for precise alignment Massive 24 kg construction for vibration damping Built for precise, repeatable spindle set-up The device supports exact positioning for both horizontal and vertical assemblies thanks to the BT-#50 spindle interface and the option to use a BT-#40 adapter. The arrangement of the taper and adapter holder allows straightforward centring of toolholders, which reduces setup time and minimises repositioning errors. The heavy construction contributes to vibration damping, improving the stability of delicate alignments and ensuring consistent results across batches. Stable foundation and clear dimensional advantages A substantial 238 x 305 mm base together with a total mass of 24 kg provides a low centre of gravity and a secure footprint for workshop use. The 187 mm height gives good access for inspection and clamping while maintaining compactness on the bench. These measurable characteristics make the unit suitable for precision work where mechanical stability and repeatable geometry are required, translating into fewer reworks and higher throughput on complex assemblies. Compatibility and practical use in the workshop Designed around standard BT tapers, the aid accepts a BT-#50 mount and can be adapted to BT-#40 using the specified adapter holder; this ensures compatibility with common toolholding systems. The construction is aimed at machinists and maintenance engineers who need a dedicated mounting solution for checking, assembling, or storing holders off-machine. By simplifying the mechanical interface and providing a rigid reference plane, the assembly tool reduces handling time and supports more efficient process flows. Contact Metav Werkzeuge for a tailored offer on the Vertex VTD-3 mounting aid with BT-#50 compatibility and a robust 238 x 305 mm base Technical Data Article number: VTD-3 GTIN: 4061905095726 ECLASS: 21029203 Facts Weight: 24 kg Height: 187 mm Base footprint: 238 x 305 mm Special features Taper compatibility: BT-#50 Adapter option: BT-#40x1 (adapter holder) Orientation: horizontal and vertical mounting FAQ What spindle tapers does the unit accept? The VTD-3 mounting aid accepts a BT-#50 taper and can be used with a BT-#40 adapter holder where required. Is the base large enough for stable bench mounting? Yes, the 238 x 305 mm base combined with a 24 kg mass provides a secure and stable platform for workshop use. What is the working height for alignment tasks? The working height is 187 mm, which balances accessibility and compact footprint for routine alignment and assembly work. Can the aid be used for both horizontal and vertical applications? The device is specified for both horizontal and vertical mounting, enabling versatile use across different assembly situations. Which manufacturer produces this mounting aid? This mounting aid is supplied by Vertex and listed under SKU VTD-3. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
187mm BT-30x2 Mounting Aid Horizontal and Vertical, Base 238x305mm - Vertex
Efficient mounting for horizontal and vertical machine setups is delivered by the combination of a BT30 adapter interface, a stable 238 x 305 mm base and a compact 187 mm profile — a reliable choice for reducing setup time and improving repeatability; order directly via Metav Werkzeuge or consult the advisors for application-specific guidance. VTD-9 Mounting aid — BT30 adapter, horizontal & vertical capability The VTD-9 is a compact mounting aid designed for machine-tool fixtures and workholding, usable in both horizontal and vertical orientations with a BT30 adapter interface. Robust 238 x 305 mm base for stable clamping BT30 adapter interface for standard toolholders Suitable for horizontal and vertical mounting Compact 187 mm height saves shop floor space Stability that supports repeatable setups A solid foundation is central to accurate positioning. The mounting aid features a 238 x 305 mm base and a mass of 23 kg, which together reduce vibration and movement during clamping and machining. These characteristics translate into improved repeatability and less rework when aligning workpieces. For shops that measure throughput and scrap rates, the robust base supports predictable mounting behaviour and contributes to smoother production runs. Built for flexible machine orientations Flexibility in orientation cuts down on dedicated fixturing. With a BT30 interface and an adapter-holder design, the unit accommodates common BT30 toolholder standards, enabling use in both horizontal and vertical fixtures without costly bespoke adapters. This adaptability reduces machine downtime for retooling and enables faster changeovers between operations, offering a measurable efficiency gain for mixed-production environments. Compact footprint that eases integration The compact overall height of 187 mm and the modest footprint make the device straightforward to incorporate into existing benches or pallet stations. The low profile helps when toolpaths or clearances are tight, while the stable construction maintains mounting integrity. For businesses optimising workshop layouts, the compact form factor supports denser, more organised workstations without compromising on the robustness required for precise positioning. Contact Metav Werkzeuge today to specify the VTD-9 mounting aid for BT30 applications and secure the right configuration for the workshop. Technical data Article number: VTD-9 GTIN: 4061905096280 Manufacturer: Vertex Facts Weight: 23 kg Height: 187 mm Base (footprint): 238 x 305 mm Special features Adapter holder: BT-30x2 Orientation: horizontal and vertical mounting ECLASS: 21029203 FAQ Is the mounting interface compatible with BT30 toolholders? The VTD-9 uses a BT30-based adapter holder (BT-30x2), making it compatible with standard BT30 toolholders and interfaces. Can the unit be used in both horizontal and vertical machine setups? Yes, the mounting aid is specified for both horizontal and vertical mounting, allowing flexible placement in different machining orientations. What are the physical dimensions and weight of the fixture? The device has a base of 238 x 305 mm, an overall height of 187 mm and a mass of 23 kg, as listed in the technical data. Who manufactures the VTD-9? The VTD-9 is manufactured by Vertex and is supplied under the Vertex product range for machine-tool accessories. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
187mm BT-50x2 Mounting Aid Horizontal And Vertical - Vertex
Benefit from a stable 238×305 mm base and a compact 187 mm profile that together provide secure, vibration-resistant support for horizontal and vertical set-ups; combined with the BT-#50x2 adapter holder, this results in faster, more repeatable machine set-up. Order the unit directly via Metav Werkzeuge or consult the team for application advice. VTD-2 Mounting Aid — BT-#50 adapter holder, 238×305 mm base The VTD-2 Mounting Aid is a compact fixture designed for horizontal and vertical machine set-up, providing a stable platform for toolholders with a BT-#50 taper Robust BT-#50x2 adapter holder Stable 238×305 mm base plate 187 mm overall height for compact setups Solid construction, 22 kg mass Precision and stability that shorten set-up times A heavy, well-dimensioned support reduces unwanted movement during clamping and machining; the combination of a stable base and mass close to 22 kg minimises vibration and increases repeatability. This stability translates directly into fewer re-adjustments and less downtime during fixture changes, which benefits busy workshops where consistent results are required. The broad 238×305 mm footprint ensures reliable load distribution on the machine table and supports accurate alignment of tooling for both preparatory and finishing operations. Flexible orientation and secure clamping for diverse workflows Designed for use in both horizontal and vertical orientations, the fixture accepts standard BT tool tapers via the BT-#50x2 adapter holder, allowing seamless use with BT-50 toolholders and adapters. The BT-#50 standard is widely used in machining environments and ensures predictable seating and concentricity when fitting arbor or spindle-mounted tooling. By permitting quick orientation changes and secure seating of the adapter, the system reduces changeover complexity and helps maintain process consistency across different operations. Engineered for integration into professional workshops Manufactured to support routine industrial workflows, this mounting aid combines a compact 187 mm profile with a robust base that simplifies positioning on the machine table. The model VTD-2 from Vertex is built for repeatable performance and straightforward handling, making it suitable for jigs, set-up stations and calibration benches where precise fixation is necessary. Supplied through Metav Werkzeuge’s European quality filter, the unit benefits from distribution that emphasises reliable availability and consistent product checks to support long-term workshop productivity. Contact Metav Werkzeuge in Emmerich for ordering and application guidance — the team can advise on compatibility, delivery times and integration into existing fixtures Technical Data SKU: VTD-2 GTIN: 4061905095719 Brand: Vertex Facts Weight: 22 kg Height: 187 mm Base dimensions: 238×305 mm Special features Mounting aid for horizontal and vertical use BT-#50x2 adapter holder eClass: 21029203 FAQ What machine taper does the fixture accept? The VTD-2 mounting aid accepts BT-50 tooling via the BT-#50x2 adapter holder, ensuring compatibility with standard BT-50 toolholders. Can the unit be used vertically as well as horizontally? Yes. The design supports both horizontal and vertical orientations, making the fixture suitable for varied set-up requirements. What are the physical dimensions and footprint of the fixture? The fixture has a compact height of 187 mm and a base footprint of 238×305 mm for stable positioning on the machine table. How heavy is the mounting aid and why does that matter? The unit weighs 22 kg; the mass contributes to stability and reduced vibration during clamping, which improves repeatability. Is the VTD-2 suitable for precision set-up benches and jigs? Yes. The VTD-2 from Vertex is engineered for integration into precision set-up benches, offering secure seating for BT-50 tooling and reliable fixation for measurement and machining tasks. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
187mm SK-30x2 Mounting Aid Horizontal And Vertical, 238x305mm Base - Vertex
Benefit from a robust assembly solution that combines secure SK‑30 compatibility, a wide 238×305 mm base and a substantial 23 kg mass for repeatable, vibration‑resistant setups. Choose Metav Werkzeuge for straightforward supply from stock or consult Metav’s experts for specification support. VTD-10 Assembly Aid – SK‑30 adapter, horizontal & vertical use (Vertex) A compact assembly aid, the VTD-10 provides a stable mounting platform for workshop setups where horizontal and vertical tool orientation with an SK‑30 adapter holder is required. Stable 23 kg mass for reduced vibration SK‑30x2 adapter holder for secure connection 238×305 mm base for firm workplace mounting Suited for horizontal and vertical configurations Precision stability for consistent assembly results The mounting aid is engineered to provide a stable platform that reduces micro‑movement during setup and assembly tasks. Its 23 kg mass and broad 238×305 mm base work together to improve repeatability and minimise the effects of external vibration on alignment. For production environments where consistent orientation is critical, this stability translates into fewer re‑setups and reduced inspection time. The dimensions and mass are deliberately matched to common workshop benches and tool posts to maintain a compact footprint while delivering tangible performance improvements. Flexible SK‑30 interface for broad compatibility Equipped with a SK‑30x2 adapter holder, the unit accepts tooling and accessories that use the SK‑30 taper, enabling fast changeovers between horizontal and vertical arrangements. The taper interface allows the mounting aid to be integrated with compatible spindles and fixtures without complicated conversions. For users less familiar with spindle tapers: SK‑30 denotes the taper standard used for axial connection, ensuring a concentric, repeatable join between holder and tool. This flexibility reduces tooling complexity and supports diverse machining or assembly tasks. Practical workshop benefits and operational efficiency The design focuses on reducing setup time and improving workplace ergonomics. At 187 mm height, the assembly aid positions mounted tools within a convenient working envelope while the flat base simplifies clamping or fixing to benches. The robust construction supports routine workshop handling and contributes to a safer, more predictable process flow. In operational terms, the device helps to cut auxiliary time per job, which is particularly relevant for small‑series production or maintenance operations where quick, reliable fixturing is essential. Contact Metav Werkzeuge to specify the optimal SK‑30 configuration for the Vertex VTD‑10 and secure reliable delivery and technical guidance from stock in Emmerich Technical Data Article number: VTD-10 GTIN: 4061905086762 Manufacturer: Vertex Facts Weight: 23 kg Height: 187 mm Base dimensions: 238×305 mm eClass: 21029203 Special features Taper: SK‑30x2 (adapter holder) Orientation: horizontal and vertical Designed for stable, repeatable mounting SKU: VTD-10 FAQ What applications is this assembly aid intended for? The VTD‑10 assembly aid by Vertex is intended for workshop mounting and assembly tasks that benefit from a stable SK‑30 connection in either horizontal or vertical orientation. Is the VTD‑10 compatible with standard SK‑30 tooling? Yes, the SK‑30x2 adapter holder on the VTD‑10 is designed to accept tooling and accessories that use the SK‑30 taper, enabling straightforward integration with compatible equipment. What are the key dimensions and weight for planning a workstation? The VTD‑10 features a 238×305 mm base, a working height of 187 mm and a mass of 23 kg, providing a compact footprint with substantial stability for bench mounting. Can the unit be used for both machining setups and assembly fixtures? The VTD‑10 is suitable for both light machining setups and assembly fixturing where a repeatable, vibration‑resistant mount is required, thanks to its robust mass and SK‑30 interface. How does the design improve setup repeatability? Repeatability is supported by the combination of the SK‑30 taper connection, the broad base and the device mass, which together reduce micro‑movement and make alignment more reliable across repeated assemblies. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
187mm SK-40x2 Mounting Aid Horizontal and Vertical, 238x305mm Base - Vertex
Take advantage of a robust solution that combines precise spindle compatibility and a wide, stable base to reduce vibration and speed up assembly tasks. The compact design and heavy mass ensure repeatable positioning for both horizontal and vertical set-ups. Order the unit directly via Metav Werkzeuge or request advice from their consultants for seamless integration. VTD-5 Mounting Aid — SK-40 compatibility, horizontal and vertical mounting (Vertex) A VTD-5 Mounting Aid designed to secure tooling and fixtures for both horizontal and vertical operations on machines with SK-40 spindles, providing a stable platform for assembly and inspection tasks. SK-40 spindle interface Suitable for horizontal and vertical mounting Stable base 238 x 305 mm Robust mass of 26 kg for vibration damping Stability that improves process reliability The device provides a stable base that limits movement during setup and inspection. With a footprint of 238 x 305 mm and a mass of 26 kg, the platform dampens vibrations that otherwise affect repeatability. This physical stability translates into fewer measurement deviations and a lower rate of rework, supporting continuous production and quality assurance on the shop floor. Technical terms: the added mass acts as passive damping, reducing resonance during delicate alignment operations. Versatile orientation for assembly and inspection Configured for both horizontal and vertical mounting, the unit supports multiple process steps without requiring additional fixtures. The orientation flexibility simplifies transitions between assembly, calibration and visual inspection, so a single accessory covers several tasks. Where vertical clamping is necessary, the design keeps the workpiece accessible while maintaining the SK-40 interface integrity, enabling quick changeovers in tight production sequences. Clear interface and adapter options for quick integration The taper connection uses an SK-40 interface with an SK-40x2 adapter holder, enabling fast mounting to standard machine spindles and toolholders. The adapter arrangement ensures secure seating and consistent concentricity, which is essential when repeatable alignment is required. For users unfamiliar with taper standards: SK-40 refers to a standard machine taper that locates the tool via a conical seat; the adapter holder allows straightforward coupling without bespoke modifications. Designed for workshop and production environments The compact height of 187 mm and the large base area make the unit suitable for bench-top use as well as integration into existing machine workflows. The robust construction supports routine industrial handling and contributes to long service life under normal workshop conditions. By focusing on functional durability rather than decorative elements, the design prioritises measurable performance—stable fixturing, reliable seating and straightforward compatibility with SK-40-equipped equipment. Contact Metav Werkzeuge for tailored advice on integrating the VTD-5 Mounting Aid into existing setups and to confirm compatibility with specific SK-40 toolholders and adapters Technical data Article number: VTD-5 GTIN: 4061905095887 eClass: 21029203 Manufacturer: Vertex Facts Height: 187 mm Base: 238 x 305 mm Weight: 26 kg Special features Spindle interface: SK-40 Adapter holder: SK-40x2 Orientation: horizontal and vertical mounting FAQ What spindle taper does this mounting aid use? The VTD-5 mounting aid uses an SK-40 spindle taper, ensuring compatibility with standard SK-40 toolholders and adapters for secure seating. Can the device be used in both horizontal and vertical setups? Yes, the unit is designed for both horizontal and vertical mounting, providing flexible positioning for assembly, inspection and fixture tasks. How does the mass of the unit affect performance? With a mass of 26 kg, the mounting aid offers passive vibration damping, which improves repeatability and reduces measurement variation during precise positioning. What are the base dimensions and why do they matter? The base measures 238 x 305 mm; a larger footprint increases stability and reduces the risk of tipping or movement during alignment and clamping operations. Is an adapter required to attach the mounting aid to a machine? The product features an SK-40x2 adapter holder to facilitate direct coupling with SK-40 spindles; confirm specific toolholder compatibility for specialised setups. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
188mm Morse Taper MT5 to B16 Taper Shank, Hardened and Ground, DIN 238 - TECWERK
Take advantage of a hardened, ground taper arbor that meets DIN 238 for secure drill-chuck mounting and consistent concentricity; the combination of Morse taper MT5 and B16 arbor fit ensures compatibility with common drilling and turning machines. Order directly via Metav Werkzeuge or contact their consultants for bespoke integration advice. Taper arbor MT5 to B16 (hardened & ground) — TECWERK The Taper arbor MT5 to B16 is a hardened and ground adaptor for mounting drill chucks on drilling and turning machines, compliant with DIN 238 for precise chuck seating. Morse taper MT5 to B16 fit Hardened and ground for wear resistance Drill-chuck taper to DIN 238 compliance Precise seating that reduces runout and rework A correctly matched taper interface is critical for hole quality; the hardened and ground Morse taper ensures a concentric connection between spindle and chuck. This taper arbor converts the MT5 spindle taper to a B16 arbor fit, providing a stable bearing surface for drill chucks and reducing radial runout. The result is repeatable accuracy in drilling tasks, fewer scrap parts and less time spent on rework, which directly supports consistent production throughput. Built for long service and low maintenance Heat-treated and finished by grinding, the arbor’s surface hardness and dimensional stability deliver improved resistance to wear and fretting. The hardened and ground execution minimises micro-movement at the contact faces, which reduces vibration and extends both chuck and spindle life. For workshops aiming to maintain uptime, this robustness translates into lower routine maintenance and dependable daily performance. Easy integration with standard chucks and machines Compliance with DIN 238 means compatibility with standard drill-chuck tapers, simplifying tool selection and inventory. Installation into machines with an MT5 spindle is straightforward: the arbor seats directly into the spindle taper and presents the B16 arbor for the chuck. This familiarity speeds fitment and reduces the chance of mismatched tooling, making it suitable for production floors, job shops and maintenance workshops that rely on standardised interfaces. A practical choice for reliable workshop performance Selecting a hardened MT5-to-B16 arbor from a recognised supplier balances technical reliability with everyday usability. The simple geometry and standard conformance mean it fits existing systems without modification, while the hardened finish sustains accuracy over prolonged use. Procured through Metav, purchasers also benefit from a supplier network that emphasises quality control and dependable logistics, supporting seamless replenishment and fewer supply interruptions. For tailored advice on integrating this MT5-to-B16 taper arbor into a specific machine setup, contact Metav Werkzeuge in Emmerich by phone or email to speak with a precision specialist Technical data Article number: 2000832343NW Standard: DIN 238 Manufacturer: TECWERK Product type: Taper arbor Arbor fit: B16 Outer taper: MT5 Total length: 188 mm Packaging unit: 1 Facts Total length: 188 mm Outer taper designation: MT5 Arbor fit designation: B16 Standard conformity: DIN 238 Special features Hardened and ground finish For mounting drill chucks on drilling and turning machines Drill-chuck taper to DIN 238 Execution: hardened and ground FAQ What machines is this taper arbor suitable for? The taper arbor MT5 to B16 from TECWERK is designed for drilling and turning machines with an MT5 spindle and accepts chucks that fit a B16 arbor. Does the arbor comply with any standards? Yes, the product is manufactured to DIN 238, ensuring compatibility with standard drill-chuck tapers. How does the hardened and ground finish benefit workshop use? The hardened and ground execution reduces wear and fretting, improving concentricity and extending the service life of both the arbor and attached chuck. What is the article number for ordering or reference? The SKU for this taper arbor is 2000832343NW and the product is listed under TECWERK. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
188mm Universal Centre Tip Running, 0.005mm Accuracy, Alloy Steel, 1800 rpm - Vertex
Take advantage of the combination of high rotational capacity, fine runout accuracy and robust alloy construction to ensure reliable support of rotating workpieces. Benefit from reduced rework and consistent concentricity by specifying the live centre from Vertex; order directly via Metav Werkzeuge or consult our technical advisors for application guidance. VPC-MT4 Universal live centre — alloy steel, 0.005 mm accuracy (Vertex) The VPC-MT4 is a universal live centre engineered to support rotating workpieces in lathes and turning centres, combining compact dimensions with stable running for general workshop and toolroom turning operations. High precision 0.005 mm runout accuracy Alloy steel construction for robust duty Operates up to 1800 r.p.m. reliably Compact 188 mm length, 1.3 kg weight Proven accuracy for consistent turning results The live support delivers a verified runout of 0.005 mm, which translates into measurably improved concentricity and fewer scrap parts. This level of precision is achieved through a balanced spindle and careful bearing selection, so that the applied clamping forces are transmitted with minimal deflection. For production runs where repeatability matters, the fine runout reduces the need for secondary turning passes and inspection overhead. The explained tolerance gives purchasing and production planners a verifiable specification to compare against alternative support centres. Robust material and dependable rotational performance Constructed from alloy steel, the centre is built for sustained workshop use and resists deformation under normal machining loads. Rated for continuous operation up to 1800 r.p.m., the component maintains stability across common turning speeds while its 188 mm compact length and 1.3 kg mass aid in rapid mounting and repositioning. The material choice provides a balance between hardness and toughness, offering wear resistance where contact occurs yet avoiding brittleness that can reduce service life. Where higher surface integrity is required, the robust construction contributes directly to consistent workpiece finish. Seamless integration and practical benefits for the workshop Designed as a live-running support, the centre fits conventional lathe tailstocks and is suitable for a wide range of turning tasks in general metalworking and toolroom environments. The spindle arrangement ensures smooth rotation of the workpiece, reducing chatter and enabling steadier machining at intermittent feed rates. Documentation and identification via the SKU support procurement processes, while the clear technical parameters allow engineers to plan cycles and tool offsets with confidence. As a Vertex product, the unit benefits from established manufacturing practices and traceability, which supports quality control and long-term parts replacement planning. Contact Metav Werkzeuge for tailored specification advice on the Vertex VPC-MT4 universal live centre or to arrange delivery from our Emmerich warehouse and technical consultation Technical data Article number: VPC-MT4 GTIN: 4061905085840 Manufacturer: Vertex Facts Accuracy: 0.005 mm Max speed: 1800 r.p.m. Weight: 1.3 kg Length: 188 mm Materials & special features Material: alloy steel Live-running centre design ECLASS: 21022304 FAQ What level of runout can be expected from this live centre? The specified runout is 0.005 mm for the Vertex VPC-MT4 universal live centre, providing the precise concentricity required for repeatable turning operations. Is the centre suitable for high-speed turning applications? The support is rated to 1800 r.p.m., making the VPC-MT4 appropriate for typical lathe speeds encountered in general workshop and toolroom work. Which material is the body made from and what does that imply? The body is manufactured from alloy steel; this offers a robust balance of wear resistance and toughness for sustained workshop use. Can the live centre be used across different lathes and tailstocks? The live-running design is compatible with conventional tailstock arrangements and is intended for broad use in turning support roles. How does this product support quality assurance in production? By delivering consistent runout and stable rotation, the VPC-MT4 reduces rework and inspection effort, aiding process control and part repeatability. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
189mm Assembly Aid Movable, Foot 149x121mm, DIN 69871A - Vertex
Take advantage of a movable assembly aid that combines DIN 69871A compatibility, a compact footprint and substantial mass for stable positioning; the result is smoother set-up work and reduced changeover times. Order the unit directly via Metav Werkzeuge or contact our consultants for tailored advice. Assembly aid VTL-BT50 by Vertex — movable, DIN 69871A compatible The Assembly aid VTL-BT50 is a movable mounting fixture designed for machine set-ups using the DIN 69871A taper interface, providing compact, stable support for precision assembly tasks. Movable design for flexible set-up DIN 69871A interface compatibility Compact footprint 149 x 121 mm Robust 9.8 kg mass for stability Precise interface for reliable machine integration The fixture features the DIN 69871A interface, which ensures mechanical compatibility with toolholders and spindles that conform to this standard; this direct fit minimises alignment effort and reduces the need for adapters. With a height of 189 mm and a base measuring 149 x 121 mm, the unit occupies little bench space while allowing repeatable vertical positioning. The substantial mass of 9.8 kg contributes to a steady working platform, reducing vibration during delicate tasks and supporting reproducible results. Flexible workshop handling and faster workflows A movable design permits uncomplicated repositioning across workstations, shortening set-up and changeover times in batch production or maintenance routines. The compact footprint and straightforward mountability simplify integration into existing jigs and fixtures, enabling quick transitions between operations. These characteristics translate into tangible efficiency gains on the shop floor and make the fixture suitable for frequent reconfiguration without sacrificing positional accuracy. Proven origin, dependable supply chain Manufactured by Vertex, the unit aligns with established workshop requirements for durability and practical handling. Supplied via Metav Werkzeuge’s European quality filter in Emmerich, each part benefits from stock control and a distribution channel focused on consistent availability for industry and trade. This combination of a recognised manufacturer and a reliable European partner supports long-term procurements and reduces the risk of supply interruptions. For purchasing advice or to arrange supply of the VTL-BT50 through Metav Werkzeuge in Emmerich, please contact our consultants at Metav Werkzeuge — eMail: info@metav-werkzeuge.com, Tel: +49 2822 7131930 or WhatsApp: +49 170 2837271 Technical data SKU: VTL-BT50 GTIN: 4061905091322 Eclass: 21029203 Manufacturer: Vertex Facts Height: 189 mm Foot dimensions: 149 x 121 mm Weight: 9.8 kg Standard: DIN 69871A Special features Movable design Compatibility with DIN 69871A toolholder interface Compact footprint for space-saving set-up Significant mass for stable positioning FAQ Is the assembly aid compatible with standard taper toolholders? The VTL-BT50 uses the DIN 69871A interface, making the assembly aid compatible with machines and toolholders that conform to that standard. How easy is it to move the fixture around the workshop? With a movable design and a mass of 9.8 kg, the unit balances portability and stability; it can be repositioned for different set-ups while retaining steady support during use. What footprint should be reserved on the workbench? Reserve a surface area matching the 149 x 121 mm base to ensure stable placement and unobstructed access for assembly operations. Does the unit support precise vertical positioning? The overall height of 189 mm combined with the DIN 69871A interface facilitates repeatable vertical alignment and helps maintain consistent positioning across multiple set-ups. Is this product suitable for industrial workshop environments? Yes — produced by Vertex and distributed via Metav Werkzeuge with a focused supply chain for industry and trade, the assembly aid is intended for routine workshop use and professional set-ups. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
18mm 5C Collet High-Precision 0.02mm Runout, 87mm Length - Vertex
Take advantage of a standard 5C system for broad compatibility, precise clamping with 0.02 mm run-out accuracy, and a compact 18 mm nominal diameter for reliable toolholding. Order the collet directly via Metav Werkzeuge or ask our consultants if required. 5C-18 Collet — 18 mm Precision Collet by Vertex 5C-18 is a high-precision collet for secure clamping in general workshop turning and milling applications, designed to meet standard 5C toolholding requirements. 5C standard for broad tool compatibility Nominal diameter 18 mm Run-out accuracy 0.02 mm Solid construction, 87 mm overall length Consistent clamping for predictable production A compact collet built to the 5C standard provides uniform clamping force and repeatable performance across batch runs. The defined 18 mm nominal diameter and balanced design reduce vibration and contribute to steady machining results, so cycle times remain predictable. With an indicated run-out accuracy of 0.02 mm, the component supports finishing operations where tight tolerances matter, helping to lower scrap rates and rework. Precision engineering that simplifies setup The collet’s geometry and respected standard make it straightforward to fit into existing chucks and fixtures, shortening machine setup and tool change intervals. The modest length of 87 mm and compact mass (0.21 kg) permit stable holding without excessive overhang, which benefits spindle life and surface finish. Where measurements are critical, the specified 0.02 mm figure is a practical indicator of expected concentricity and is useful when programming finishing passes. Robust specification for everyday workshop use Manufactured to standard industrial expectations, this clamping insert is intended for routine use in mixed-production environments. The 5C format supports a wide range of tooling and adapters, enabling flexible job planning and reduced tooling stock. The combination of standard conformity and documented run-out performance strengthens process reliability, making the component a dependable part of a pragmatic machining strategy. Contact Metav Werkzeuge for availability, application advice and to request the Vertex 5C-18 collet for integration into existing toolholding systems Technical Data Article number: 5C-18 GTIN: 4061905089497 Manufacturer: Vertex Specifications Diameter: 18 mm Length: 87 mm Weight: 0.21 kg Run-out accuracy: 0.02 mm eClass: 21041712 Features Collet type: 5C SKU: 5C-18 Image available for reference FAQ What is the nominal diameter and tolerance of the collet? The collet is specified as an 18 mm nominal diameter with a documented run-out accuracy of 0.02 mm for the Vertex 5C-18 collet. Is the 5C-18 collet compatible with standard 5C chucks? Yes, the 5C-18 follows the 5C standard and is suitable for use in conventional 5C chucks and holders from Vertex and other compliant systems. How does the run-out accuracy affect finishing operations? A run-out accuracy of 0.02 mm for the 5C-18 collet helps maintain concentricity during finishing, improving surface quality and reducing the need for rework. Can the collet be used across different machines and tools? The 5C format of the 5C-18 collet ensures broad compatibility with a variety of toolholders and machine setups, enabling flexible application in mixed-workshop environments. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
18mm Centre Drill Type 665 MK2 60° Full Tip 100mm Shank DIN 806 - RÖHM
Take advantage of the 60° geometry and full point design together with a hardened, ground construction for consistent centring and long service life — procure the unit via Metav Werkzeuge or consult our specialists for application advice. Centre point Type 665 MK2 — 60° solid point with MK2 taper by RÖHM The Centre point Type 665 MK2 is a fixed centre for tailstock applications, providing a precise 60° solid point for repeatable workpiece alignment in conventional metalworking operations DIN 806 hardened and ground 60° solid centre point geometry Tool-steel construction for durability MK2 taper with 100 mm overall length Accurate centring for repeatable machining results The standard 60° tip angle follows DIN 806, which ensures consistent engagement with conventional centre holes and compatible centres in chucks and centres. The full point tip reduces the lateral slippage that causes run-out, so concentricity is improved during turning and drilling operations. Because the point is hardened and ground, the contact surface resists deformation under load, maintaining centre accuracy over longer production runs and reducing the need for frequent rework. Built for workshop durability and stable mounting Constructed from tool steel and fully finished by hardening and precision grinding, the assembly resists wear from repeated contact with workpieces. The MK2 taper provides a secure fit in commonly used tailstocks and adaptors, while the 100 mm overall length and 36 mm projection give a balanced combination of reach and support. This robust specification translates into fewer interruptions for maintenance and a reduced risk of tip damage during normal lathe operations. Simple compatibility and straightforward handling The taper and dimensions follow established standards, easing integration into existing equipment. The MK2 interface makes mounting and replacement fast, which limits machine downtime and simplifies tooling logistics on the shop floor. The compact projection and standard diameter also allow stable support for light to medium turning and centring tasks, enabling reliable performance without complex set-up procedures. For procurement or detailed suitability checks of the RÖHM Centre point Type 665 MK2, contact Metav Werkzeuge for tailored advice and fast delivery from our Emmerich facility at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 4121011129NW Type: 665 Brand: RÖHM Product: Centre point Core dimensions Diameter: 18 mm Overall length: 100 mm Projection: 36 mm Tip angle: 60° Packaging unit: 1 Materials & features Tool steel Fully hardened and ground DIN 806 compliant Full point (solid tip) MK2 taper FAQ What is the tip angle and why does it matter? The tip angle is 60°, which is the standard geometry for centring; the 60° point on the RÖHM centre point Type 665 MK2 ensures reliable engagement in conventional centre holes and reduces run-out during turning. Is the centre point compatible with standard tailstocks? Yes, the MK2 taper provides compatibility with most conventional tailstocks and adaptors designed for Morse taper 2 fittings. How durable is the contact area of this centre point? The contact area is hardened and ground, which increases wear resistance and preserves accuracy under repeated use compared with untreated tips. What lengths and projections are provided? This variant offers a 100 mm overall length with a 36 mm projection, balancing reach and support for typical workshop centring tasks. Does the product follow recognised standards? The design conforms to DIN 806, which standardises the geometry and finishing quality expected from a precision centre point. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
18mm Clamping Screw M5 5mm Square For Changeable Holder, 18mm Length - TECWERK
Combining a secure M5 thread with a 5 mm square drive and an 18 mm overall length, this clamping screw delivers dependable retention in TECWERK quick-change holders while keeping downtimes low. Order replacement parts directly via Metav Werkzeuge or consult the advisors for compatibility and stock information. TECWERK Clamping Screw AA – M5 thread, 18 mm, 5 mm square drive A TECWERK clamping screw AA intended as a spare part for quick-change turning tool holders, engineered to provide precise axial fixation in compact assemblies. Replacement part for TECWERK quick-change holders M5 thread for standardised clamping 18 mm overall length for compact assemblies 5 mm square drive for secure torque input Secure retention that reduces machine downtime The clamping screw is designed for straightforward replacement in quick-change systems, delivering consistent axial fixation that safeguards insert alignment and cutting stability. With its M5 thread and compact geometry, the fastener keeps clamping forces reliable across repeated tool changes, which translates into fewer stoppages and a more predictable production rhythm. The clearly defined mechanical interface lowers the risk of misfits and helps maintain machining accuracy. Standardised interface for easy compatibility checks Featuring a standard M5 pitch and a 5 mm square drive, the part matches common clamping interfaces used in quick-change tool holders. These measurable characteristics simplify procurement and inventory management: the thread designation and square drive are immediately verifiable, so replacement planning becomes a matter of matching specifications rather than guesswork. The result is faster reassembly and reduced setup times on the shop floor. Compact form for tight assemblies and reliable handling At 18 mm overall length, the component suits compact toolholders where axial space is limited. The square drive provides a positive engagement for tightening tools and helps ensure torque is transmitted without slippage during installation or removal. As a spare part tailored to quick-change systems, the fastener supports repeatable clamping performance and contributes to consistent tool life when used within its specified interface. Supply reliability and expert support for workshop planners Metav Werkzeuge supplies this spare as part of a broad portfolio that streamlines ordering and reduces supplier complexity. Backed by a substantial product range and industrial experience, Metav enables reliable stock replenishment and offers technical guidance for compatibility decisions. For workshops seeking a blend of availability and trusted standards, this replacement component integrates into established toolholder systems with minimal administrative effort. Request this TECWERK spare via Metav Werkzeuge for assured compatibility and fast supply; technical enquiries and availability checks can be directed to Metav Werkzeuge at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 2000832426NW Label: Spannschraube Größe=AA M5 L.18mm 4-KT.5mm z.Wechselhalter TECWERK Brand: TECWERK Product type: Clamping screw Type: AA Facts Thread: M5 Overall length: 18 mm Square drive: 5 mm Packaging unit: 1 Special features Spare part for TECWERK quick-change holder for turning tool inserts and with prism Axite enrichment: Ersatzteil zu TECWERK Wechselhalter für Drehstähle und mit Prisma UID: 2000832426NW FAQ Is this clamping screw compatible with TECWERK quick-change holders? Yes. The clamping screw is specified as a replacement part for TECWERK quick-change holders and matches the interface used for turning tool inserts. What are the key dimensions and drive type? The component has an M5 thread, an overall length of 18 mm and a 5 mm square drive, which together define the mechanical connection and torque input method. Can the screw be used in compact toolholder assemblies? Yes. With its 18 mm overall length and compact profile, the screw is suitable for tight axial spaces in quick-change systems while maintaining secure fixation. How should compatibility be verified before ordering? Verify the thread (M5), the square drive size (5 mm) and the overall length (18 mm) against the toolholder specifications; the SKU 2000832426NW can be referenced for exact matching. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
18mm Clamping Wedge For T-Slot 18mm Clamping Height 13-46mm With M16x125 Clamping Screw - AMF
Take advantage of a compact clamping solution that secures workpieces in an 18 mm T‑slot, offers an adjustable clamping height of 13–46 mm and includes a M16 x 18 x 125 clamping screw for immediate integration; order directly via Metav Werkzeuge or ask our consultants for technical guidance. Clamping iron No. 6314V — T‑slot clamp for 18 mm, H 13–46 mm (AMF) The Clamping iron No. 6314V is a robust T‑slot clamping element designed for secure workpiece fixation on 18 mm T‑slot tables in machining and fixture setups. T‑slot compatibility 18 mm Adjustable clamping height 13–46 mm Includes M16 x 18 x 125 clamping screw Compact 18 mm width for tight setups Precise hold for efficient setups The primary advantage of this clamping element is its ability to provide a secure, repeatable hold across different workpiece heights thanks to the 13–46 mm clamping range. Combining a narrow profile with a dedicated clamping screw means fewer fixture changes and faster setup times on milling machines and universal worktables. The T‑slot design simplifies alignment and ensures the clamping force is transferred directly to the workpiece, reducing slippage and improving process reliability. For production environments where changeover speed matters, the balanced geometry of the clamp reduces adjustment steps and contributes to a steadier workflow. Space-saving form for compact fixtures With a nominal width of 18 mm and an overall length of 125 mm, this clamp is conceived for dense fixture arrangements where space is at a premium. The slim footprint enables closer positioning of multiple clamps without compromising access for tools or coolant. The compact dimensions also help when retrofitting existing setups: the piece will fit into standard 18 mm T‑slots while leaving room for adjacent clamping elements or measuring probes. The restrained form factor supports modular clamping strategies and helps maintain clear sightlines to the machining zone during operation. Simple integration and standardised fastening Threaded for M16, the clamp accepts standard clamping screws and nuts used across workshops, and the delivery includes a M16 x 18 x 125 clamping screw to allow immediate mounting. The choice of an M16 thread provides a widely available, robust interface that balances tensile strength and ease of handling. For those new to clamping technology: the M16 designation refers to the metric thread nominal diameter, while the screw length and head geometry determine reach and clamping leverage. Using standardised components reduces tooling inventory and simplifies maintenance. Built for workshop reliability From small jobbing shops to production cells, the unit is designed to deliver consistent performance under repeated use. The combination of precise sizing for 18 mm T‑slots, a variable clamping height and an included screw reduces the chance of incompatible hardware arriving on the bench. The clamp's straightforward functionality supports efficient fixturing routines and promotes predictable machining results, which in turn shortens inspection cycles and minimises rework. For procurement, the compact specification helps planners assess compatibility quickly and with confidence. For technical advice or delivery details on this AMF T‑slot clamp, contact Metav Werkzeuge for tailored support and prompt dispatch from Emmerich. Technical Data SKU: 4000833075NW Type: No. 6314V Manufacturer: AMF Product type: Clamping iron Clamping screw included: M16 x 18 x 125 Facts T‑slot width: 18 mm Clamp width: 18 mm Clamping height: 13–46 mm Total length: 125 mm Thread: M16 Packaging unit: 1 Additional dimensions: A: 25; B2: 50; E1: 26; E2: 45; LS: 55 Special features Designed for 18 mm T‑slot systems Adjustable clamping height for varied workpieces Includes standard M16 clamping screw for immediate use Compact profile for dense fixturing Type No. 6314V by AMF FAQ Is this clamp compatible with other T‑slot sizes? The clamp is designed specifically for an 18 mm T‑slot; compatibility with other slot sizes is not supported without adapter elements. What clamping height range does the product cover? The clamping height range is 13–46 mm, allowing secure fixation of parts with varying thicknesses. Does the delivery include the clamping screw? Yes, the delivery contains a M16 x 18 x 125 clamping screw as specified for immediate mounting. Which thread standard is used and what does M16 mean? The clamp uses an M16 metric thread; M16 indicates a 16 mm nominal thread diameter common in workshop fastenings. Can multiple clamps be used close together on the same table? The 18 mm width and 125 mm length are intended to allow close placement for dense fixture arrangements while preserving access for machining tools. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
18mm ER 25 Collet Precision Clamping Range 0.5mm, L40mm, D33mm - TECWERK
Combine 5 µm runout accuracy with full‑length tool gripping and DIN conformity for reliable clamping in production; order the TECWERK ER collet via Metav Werkzeuge or contact our consultants for specification advice. Collet type ER 32/470 E — ER collet, 18 mm clamping diameter, TECWERK A Collet type ER 32/470 E engineered for ER‑type collet chucks, providing full‑length gripping and DIN 6499‑B compatibility for precise milling and drilling applications. Full-length gripping for secure toolholding DIN 6499-B standardised dimensions 5 µm runout and repeatability Clamping compensation: nominal Ø −1.0 mm Reliable precision for demanding machining The ER collet delivers a measured runout of 5 µm, which directly improves toolpath accuracy and reduces scrap rates in batch production. This level of concentricity means spindle loads are more balanced, leading to steadier cuts and a superior surface finish. For operations where repeatability matters, the documented 5 µm tolerance supports predictable results across multiple setup changes, helping maintain throughput and minimise rework. Secure grip across the full clamping length The design secures tools along the full clamping length, so cutters and drills are held more consistently than with partial‑contact systems. Clamping is possible on the lead‑in chamfer, enabling safe engagement for short‑shank tools and reducing axial play. The collet provides clamping compensation (nominal Ø −1.0 mm), meaning the effective clamping range bridges small diameter differences without intermediate adapters, which simplifies setup and shortens preparation time. Straightforward fitment and standards compliance Manufactured to DIN 6499‑B, the collet integrates smoothly with ER‑type collet chucks and requires no intermediate sizes for most toolholders, streamlining stock management. The compact dimensions (L: 40 mm, d: 18 mm, D: 33 mm) make it suitable for confined spindle spaces while maintaining the precision that modern machining demands. Clear standardisation reduces guesswork during procurement and enables rapid replacement during scheduled maintenance. Contact Metav Werkzeuge today for a tailored recommendation on the TECWERK ER collet and to check suitability for specific spindle systems — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: 2000832956NW Label: Collet type ER 32/470 E, clamping dia. 18 mm, TECWERK Product type: ER collet Packaging unit: 1 Manufacturer: TECWERK Facts L: 40 mm d: 18 mm D: 33 mm Runout / repeatability: 5 µm Clamping compensation: nominal Ø −1.0 mm Special features According to DIN 6499‑B Suitable for ER‑type collet chucks No intermediate sizes required Tools held along full clamping length Clamping possible on the lead‑in chamfer FAQ What spindle systems is this collet compatible with? The Collet type ER 32/470 E is compatible with standard ER‑type collet chucks and follows DIN 6499‑B dimensions to ensure proper fit and function. What level of runout can be expected? The TECWERK ER collet achieves a runout and repeatability of 5 µm, providing high concentricity for precision machining tasks. Can the collet clamp tools on the chamfer? Yes, the collet can be clamped on the lead‑in chamfer, allowing secure holding of tools with reduced effective shank length. What are the key dimensions of the collet? The collet has a clamping diameter of 18 mm, length 40 mm, and outer diameter 33 mm as specified for the Collet type ER 32/470 E. Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund
18mm ER Collet Precision ER32 Clamping Collet 5µm Runout, L46mm - TECWERK
Combining DIN 6499‑B compatibility with a 5 µm runout and a clamping diameter of 18 mm delivers reliable, repeatable clamping for high‑precision machining. Order directly via Metav Werkzeuge or consult the Metav team for specification advice and fast supply. Spannzange Typ ER 40/472 E Spann‑D.18mm TECWERK — ER collet, 18 mm clamping diameter, 5 µm runout A bold and compact collet solution, the Spannzange Typ ER 40/472 E Spann‑D.18mm TECWERK is engineered for secure tool retention in ER collet chucks used across general workshop and industrial machining applications DIN 6499‑B standard compliance 5 µm runout and repeatability Clamping diameter 18 mm Length L 46 mm for secure hold Accurate clamping that raises machining consistency The collet offers 5 µm runout, a figure that directly improves part quality by reducing radial error at the tool tip. Runout describes the deviation of the rotating tool axis from true centre; a low figure means cuts are concentric and tool wear is reduced. Certified to DIN 6499‑B, this clamping sleeve ensures repeatable results in batch production and shortens quality checks, so setups stay consistent between shifts and operators. Designed for seamless integration with ER systems Built to fit standard ER collet chucks, the unit provides full‑length holding so tools are gripped along the entire clamping area rather than only at the nose. That design improves stability under load and allows clamping on the lead chamfer where required. The specification notes a clamping bridge of nominal minus 1.0 mm, which clarifies the usable range when selecting matching tool shanks and avoids unnecessary rework during tool changes. Practical dimensions and workshop benefits Key dimensions such as L: 46 mm, d: 18 mm and D: 41 mm support a compact tool envelope while delivering robust retention. The compact form factor reduces interference in tight setups and permits deeper insertion without compromising grip. Together with the DIN standard and low runout, these characteristics reduce cycle interruptions, lower scrap rates and increase machine uptime—advantages that deliver measurable efficiency gains on the shop floor. For tailored advice on integrating the TECWERK ER collet into existing toolholding systems, contact Metav Werkzeuge in Emmerich for expert guidance and reliable delivery: info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: 2000832978NW Label: Spannzange Typ ER 40/472 E Spann‑D.18mm TECWERK Product type: ER collet Packaging unit: 1 Manufacturer: TECWERK Facts Clamping diameter: 18 mm L: 46 mm d: 18 mm D: 41 mm Runout / repeatability: 5 µm Clamping bridge: nominal minus 1.0 mm Special features DIN 6499‑B Compatible with ER collet chucks Tools held along whole clamping length Can be clamped on the lead chamfer Suited for repeatable fixture setups FAQ What runout can be expected from this collet? The Spannzange Typ ER 40/472 E Spann‑D.18mm TECWERK is specified with a 5 µm runout and matching repeatability for high‑precision machining. Is this collet compatible with standard ER chucks? Yes, the clamping sleeve complies with DIN 6499‑B and is compatible with ER collet chucks designed for the ER series. What are the main dimensions to check for fixturing? Relevant dimensions are L: 46 mm, d (clamping diameter): 18 mm and D: 41 mm; the SKU is 2000832978NW for ordering reference. Can tools be held on the lead chamfer with this collet? The design allows tools to be clamped on the lead chamfer and provides holding along the entire clamping length for improved stability. Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund
18mm ER11 Collet 1.5mm Clamping Diameter, High Runout Accuracy 5 µm - TECWERK
Take advantage of precise, standardised clamping and proven runout performance to maintain machining consistency and extend tool life. The TECWERK ER 11 collet combines DIN 6499-B conformity with a 5 µm runout specification and a compact 18 mm length, ensuring dependable compatibility with ER collet chucks — order directly via Metav Werkzeuge or consult our experts for application advice. ER 11 Collet 4008 E — 1.5 mm clamping diameter (TECWERK) A ER 11 collet 4008 E designed for accurate clamping of small-diameter tools in ER collet chucks for precision milling and drilling applications DIN 6499-B standardised design Holds tools along entire clamping length Runout and repeatability 5 µm Clamping diameter 1.5 mm, length 18 mm Consistent machining through low runout and repeatability High-precision processes demand predictable tool behaviour; the 5 µm specification for runout and repeatability translates directly into tighter tolerances on finished parts and reduced scrap. By adhering to DIN 6499-B, the collet provides a standardised interface for ER systems, simplifying tool changes and ensuring consistent centring. For components where concentricity and surface finish matter, this level of axial control reduces vibration and improves tool life, which in turn lowers operating costs over multiple production cycles. Secure clamping across the whole tool shank for improved stability The clamping geometry holds tooling over the full clamping length, which increases lateral support and reduces deflection when machining slender tools. The design allows clamping on the lead-in chamfer and accommodates a clamping span of nominal minus 0.5 mm, enabling safe bridging of slightly undersized shanks without loss of grip. Such behaviour benefits repeatable, high-accuracy operations where even small shifts in tool position would cause dimensional drift or surface irregularities. Compact dimensions and straightforward workshop integration With a length of 18 mm and an outer diameter of 11.5 mm, this collet is compact yet robust, making it suitable for tight spindle spaces and compact tooling setups. The 1.5 mm clamping capacity addresses common small-tool applications in PCB, jewellery, and miniature milling, while compatibility with ER collet chucks reduces the need for specialised adaptors. The combination of minimal size and standard compliance supports efficient tool changes and keeps spindle overhang low, which enhances rigidity during fine-detail machining. For dependable, repeatable clamping choose the TECWERK ER 11 collet and contact Metav Werkzeuge for procurement guidance or assistance in selecting the correct collet for specific machining needs. Technical Data Article number: 2000832849NW Type: ER 11 Designation: ER 11 collet 4008 E, clamping dia 1.5 mm Manufacturer: TECWERK Packaging unit: 1 Measurements & accuracy Clamping diameter: 1.5 mm Length (L): 18 mm Outer diameter (D): 11.5 mm Runout / repeatability: 5 µm Clamping span: nominal minus 0.5 mm Standards & features DIN 6499-B Suitable for ER collet chucks Holds tools over entire clamping length Can be clamped on the lead-in chamfer No intermediate sizes required FAQ What accuracy can be expected from this collet? The collet delivers a runout and repeatability of 5 µm, ensuring high concentricity for small-diameter tools when used in ER collet chucks. Can the collet bridge slightly undersized tool shanks? Yes, the clamping span permits bridging of up to nominal minus 0.5 mm, allowing secure clamping of slightly undersized shanks without specialised adaptors. Is the collet compatible with standard ER systems? The component conforms to DIN 6499-B and is compatible with ER collet chucks designed for the ER 11 system; dimensions L = 18 mm and D = 11.5 mm match common ER 11 interfaces. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
18mm Hex Nut DIN 6330B M12 Strength Class 10, SW18 - AMF
Benefit from a reliable combination of high clamping capability and a standardised fit: the Class 10 rating and M12 thread form a durable basis for secure mechanical joints, while the 18 mm wrench width ensures fast assembly. Order directly via Metav Werkzeuge or consult our specialists for application-specific advice. Hexagon nut DIN 6330B M12 (SW 18 mm, Class 10) by AMF A Hexagon nut DIN 6330B M12 designed for robust mechanical connections in industrial and workshop environments, compliant with the DIN 6330B standard. High-strength Class 10 performance M12 thread, suitable for standard bolts 18 mm wrench width (SW 18) Overall height 18 mm for secure clamping Robust clamping for dependable assemblies The combination of a Class 10 rating and a standard M12 thread provides a clearly defined performance level that supports reliable fastening under sustained load. Where repeatability matters, the hexagonal geometry offers a proven profile for torque transfer and prevents slippage during installation. This specification reduces the risk of rework and contributes to predictable maintenance intervals, supporting streamlined production planning and fewer unplanned stops. Precise fit reduces installation time With an SW 18 wrench width and an overall height of 18 mm, the part delivers a consistent interface for common spanners and sockets. The corner measure (Eckenmaß) of 20.03 mm aligns with the DIN guideline to ensure tool compatibility and minimise rounding during tightening. Such dimensional conformity eases assembly operations and shortens cycle times on the shop floor by enabling faster, safer torque application with standard tooling. Reliable sourcing and application confidence Manufactured to DIN 6330B, this hexagon nut is intended for use where specification compliance and traceability matter. A single-piece packaging unit supports controlled inventory management for small-batch production or repair tasks. Combined with Metav’s established supply chain and quality control procedures, the component represents a pragmatic choice for workshops and OEMs seeking consistent performance and dependable replenishment from a European distribution hub. Contact Metav Werkzeuge for tailored procurement advice on AMF hexagon nuts and to confirm suitability for specific assemblies; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 4000833394NW Type: M12 Standard: DIN 6330B Manufacturer: AMF Product type: Hexagon nut Label: Sechskantmutter DIN 6330B M12 SW 18mm Festigkeit 10 AMF Facts Overall height: 18 mm Wrench width: 18 mm Packaging unit: 1 Corner measure: 20.03 mm Strength class: 10 Special features DIN 6330B compliance Suitable for M12 threaded assemblies Hexagon geometry FAQ What standard does this hexagon nut comply with? The nut conforms to DIN 6330B, ensuring standardised dimensions and compatibility for industrial assemblies when using an M12 thread. What is the required spanner size for tightening? The specified wrench width is 18 mm (SW 18), matching common metric spanners and sockets for efficient installation. Is this product suitable for heavy-duty fastening? Yes, the component is specified as strength class 10, indicating suitability for higher-load fastening tasks where a robust fastener is required. How is the nut supplied in terms of packaging? The item is supplied as a single-piece unit; the packaging unit is 1, which suits targeted repairs or small production runs. Can the part be referenced for ordering or traceability? Use the article number 4000833394NW and the AMF designation to ensure accurate procurement and traceability within stock systems. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
18mm Hex Nut DIN 6331 M12 Corner Size 20.03, Strength Class 10 - AMF
Take advantage of a standardised connection that combines DIN 6331 conformity with strength class 10 performance to secure heavy-duty bolted joints; order via Metav Werkzeuge or consult our specialists for application advice. AMF Hexagon Nut DIN 6331 M12 — SW 18 mm, Strength Class 10 The AMF Hexagon Nut DIN 6331 M12 is a high-strength fastening component for industrial assemblies and machinery where defined geometry and consistent torque transfer are required. DIN 6331 standard compliance Strength class 10 for high tensile loads SW 18 mm spanner width for standard tools Precise geometry with 20.03 mm corner measure Engineered for dependable, high-strength joints This component follows DIN 6331, making it suitable for applications that demand reproducible fastening behaviour. With its strength class 10 rating and M12 thread, the nut is designed for high tensile loads, delivering consistent clamping force under operational stress. The standardised specification reduces uncertainty in component selection and helps maintain assembly integrity across serial production runs. Precision geometry that improves torque transmission The nut’s defined dimensions — including SW 18 mm wrench size and a total height of 18 mm — ensure accurate contact with the spanner and an even load distribution across bolt faces. The documented corner measure 20.03 mm reflects controlled manufacturing tolerances, which support reliable torque application and reduce the risk of rounding or slippage during assembly. Machined surfaces contribute to predictable seating and minimal stress concentrations. Practical benefits for procurement and assembly processes Supplied as individual units and identified by SKU 4000833409NW, this hexagon nut streamlines inventory management for maintenance and production departments. Conformity to an established standard simplifies compatibility checks with M12 bolts and fasteners already in use. Where traceability and repeatability are priorities, the documented specification aids quality control and part reconciliation in workshop and industrial environments. For assured high-strength fastening with the AMF hexagon nut, contact Metav Werkzeuge for product availability and specification support at info@metav-werkzeuge.com or +49 2822 7131930. Technical Data SKU: 4000833409NW Brand: AMF Article type: Hexagon nut Standard: DIN 6331 Facts Thread size: M12 Wrench width: 18 mm Total height: 18 mm Corner measure: 20.03 mm Packaging unit: 1 Special features Strength class 10 Pressed and machined finish (as labelled) Designed for industrial bolted joints FAQ What does strength class 10 indicate for this nut? The strength class 10 rating for the AMF hexagon nut signifies a high tensile capability suitable for demanding bolted connections and higher preload applications. Is this nut compatible with standard M12 bolts? Yes; the nut is specified as M12 under DIN 6331, ensuring compatibility with standard M12 bolts manufactured to the same thread standard. Which spanner size is required to fit this nut? A spanner or socket of 18 mm (SW 18 mm) is required to engage the nut correctly and apply the specified torque. What is the overall height and how does it affect assembly? The nut has a total height of 18 mm, providing sufficient thread engagement for secure clamping while fitting common assembly envelopes. How is the geometry controlled to ensure repeatable performance? The documented corner measure 20.03 mm and machined finish indicate controlled production tolerances, supporting repeatable torque transfer and reduced risk of component deformation during tightening. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
18mm Hex Nut DIN 6331 M12 SW 19 Pressed and Machined Strength Class 10 - AMF
Robust fastening with standard conformity and high tensile capacity; the combination of DIN 6331 compliance and strength class 10 provides reliable performance in demanding assemblies. The precision milled faces and a defined SW 19 width ensure consistent torque behaviour. Order the hexagon nut directly via Metav Werkzeuge or ask our consultants if needed. Hexagon nut DIN 6331 M12 SW 19 mm, strength class 10 — AMF A hexagon nut DIN 6331 M12 for high-strength machine and assembly applications, precision pressed and milled to ensure a secure, repeatable clamping connection. DIN 6331 compliant fastening element M12 thread and strength class 10 Width across flats 19 mm (SW 19) Overall height 18 mm, corner size 21.1 mm Consistent load-bearing performance for critical joints The nut is manufactured to meet DIN 6331, which assures dimensional compatibility with industry-standard threaded connections. With strength class 10, the part offers a higher load capacity than lower classes, making it suitable for assemblies exposed to elevated tensile stresses. The standardised geometry simplifies component selection in production planning and maintenance schedules, reducing the risk of mismatched parts and unplanned downtime. This technical conformity supports predictable mechanical behaviour under load. Predictable torque and seating through precision geometry Precision in contact surfaces matters for reliable clamping. The nut’s precision-milled faces minimise seating irregularities and ensure the applied torque translates into consistent preload. The SW 19 spanner size and overall height 18 mm define the working envelope for tools and tightening procedures, while the corner size 21.1 mm supports secure engagement with sockets and wrenches. Clear specification of these dimensions reduces assembly variance and helps maintain joint integrity over repeated service intervals. Easy specification, ordering and integration into existing systems As a standard M12 component, the part integrates directly with common fasteners and fixtures, simplifying procurement and stock management. The clearly documented dimensions and the DIN reference enable quick cross-referencing in technical drawings and procurement lists. Single-unit packaging supports spare-part provisioning for repair shops and small-batch production runs. Where clarity is required during selection, the concise dimension set and compliance data enable rapid decision-making within engineering and purchasing workflows. For technical advice or to secure this AMF hexagon nut for critical assemblies, contact Metav Werkzeuge in Emmerich—call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: 4000833410NW Manufacturer: AMF Product type: Hexagon nut Standard: DIN 6331 Thread: M12 Key dimensions Width across flats: 19 mm (SW 19) Overall height: 18 mm Corner size (Eckenmaß): 21.1 mm Special features Strength class: 10 Pressed and milled faces Packaging unit: 1 Label: Sechskantmutter DIN 6331 M12 SW 19mm gedr.u.gefräst Festigkeit 10 AMF FAQ What standard does this nut comply with? The nut is manufactured to DIN 6331, ensuring standardised dimensions and interchangeability with M12 threaded components. Is this hexagon nut suitable for high-load applications? Yes—its strength class 10 rating identifies it as appropriate for higher tensile demands compared with lower strength classes. Which spanner size is required for tightening? The specified width across flats is 19 mm (SW 19), so a 19 mm spanner or socket should be used for assembly and maintenance. What dimensions should be checked before selecting this nut for an assembly? Confirm the M12 thread compatibility, the overall height 18 mm, and the SW 19 width across flats to ensure tool fit and correct seating in the intended application. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
18mm Pneumatic Push Rod Clamp Horizontal Foot 4.5kN Push, 8.8kN Hold, Zinc Plated Cast Body - Kukamet
The combination of a high holding force, compact piston design and robust zinc-plated cast body ensures stable clamping cycles and long service life in automated fixtures; order the pneumatic push rod clamp 671 directly via Metav Werkzeuge or ask our consultants if needed. Pneumatic Push Rod Clamp 671 — Kukamet, 4,500 N pressing force, zinc-plated cast body The Pneumatic Push Rod Clamp 671 is a compact pneumatic clamp designed for repetitive fixture and automation tasks, offering high holding performance in a horizontal-foot mounting format. High holding force 8,800 N Max pressing force 4,500 N Zinc-plated cast body for durability Horizontal-foot mounting for simple integration dependable clamping performance for continuous production The Pneumatic Push Rod Clamp 671 delivers consistent, measurable results thanks to its combination of max pressing force and holding force ratings. With a pressing force of 4,500 N and a holding force of 8,800 N, the unit is suitable for demanding cycle work where secure immobilisation of parts is essential. The measurable forces provide a factual basis for fixture design, enabling planning for clamping sequences and component stresses within production cells. engineered for endurance and straightforward installation Constructed with a zinc-plated external finish and a cast body, the clamp is built to resist wear and corrosion in workshop environments. The horizontal-foot mounting simplifies attachment to jigs and plates, reducing fixture modification time and supporting repeatable alignment. The compact design and modest mass of 2.14 kg reduce inertial load on moving assemblies, while the mechanical layout supports reliable pneumatic actuation over long maintenance intervals. precise actuation and compact footprint for automated fixtures A piston diameter of 18 mm provides the mechanical basis for fast, repeatable actuation cycles with controlled stroke behaviour. The push-rod principle converts pneumatic pressure into direct axial clamping force, making the device suitable for inline automation and CNC fixturing where controlled linear thrust is required. The compact footprint helps conserve space on multi-station fixtures and permits straightforward sequencing with other pneumatic components. practical benefits for engineering and workshop teams Specifying the unit in a clamping layout offers clear technical advantages: predictable force values for finite-element or process planning, a corrosion-resistant exterior for extended life, and a mounting form factor that reduces integration effort. These attributes support predictable uptime and simplified spare-part management within production logistics, contributing to smoother workflows and reduced unplanned downtime. Contact Metav Werkzeuge to discuss integration options for the Kukamet Pneumatic Push Rod Clamp 671, request technical matching for fixtures or obtain delivery details from our Emmerich location. Technical data Article number: 671-4-Q18 GTIN: 8680731503197 Manufacturer: Kukamet ECLASS: 21041716 ETIM: EC011973 Facts Weight: 2.14 kg Max pressing force: 4,500 N Max holding force: 8,800 N Piston diameter: 18 mm Special features Finish: zinc-plated Body: cast construction Mounting: horizontal foot Actuation: pneumatic push-rod clamp Category: Spanner FAQ What maximum clamping and holding forces does the unit provide? The Kukamet Pneumatic Push Rod Clamp 671 provides a maximum pressing force of 4,500 N and a maximum holding force of 8,800 N, values suitable for robust fixture applications. What is the piston diameter and why is it relevant? The piston diameter is 18 mm; this dimension influences stroke speed, air consumption and the mechanical force available for each actuation, which helps when calculating cycle times and pneumatic supply requirements. Which mounting option is provided for fixture integration? The device uses a horizontal-foot mounting arrangement, enabling straightforward bolting to plates and jigs for repeatable positioning within automated fixtures. What materials and finishes are used to increase durability? The clamp features a zinc-plated exterior with a cast body, providing corrosion resistance and a sturdy structural base for repeated industrial use. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
18mm Pneumatic Push Rod Clamp, 4.5kN Thrust, 8.8kN Holding Force, Zinc-Plated Cast Body - Kukamet
Take advantage of robust clamping performance and durable construction for consistent cycle times and secure fixturing. With a compact piston design and simple horizontal mounting, the unit supports efficient integration into pneumatic supply systems. Order the clamp via Metav Werkzeuge or contact our consultants for installation details. Pneumatic Push-rod Clamp 641 — Horizontal foot, 4,500 N push force (Kukamet) A compact Pneumatic Push-rod Clamp 641 designed for reliable workholding in machining, assembly and fixture applications across industrial workshops. High push force 4,500 N High holding force 8,800 N Galvanised cast body, robust construction Consistent clamping force for stable production The clamp delivers a repeatable push force of 4,500 N and a holding force of 8,800 N, ensuring components remain immobile during machining and handling. These rated forces translate into fewer rejects and less rework because the fixture sustains loads without micro-movement; the distinction between push and holding forces is crucial for process planners and fixture designers. The specified values are engineering-grade indicators of performance and can be used to calculate safety factors and cycle loads for automated systems. Built for workshop resilience and precise mounting Constructed with a galvanised finish and a cast body, the unit resists corrosion while offering the rigidity needed for accurate clamping. The compact mass of 2.57 kg balances stability with easy handling during fixture assembly. A horizontal foot mounting arrangement simplifies attachment to tooling plates and allows predictable force vectors, which reduces setup time and alignment iterations. Galvanisation protects cast surfaces from routine environmental effects and reduces the need for frequent part replacement, supporting longer mean time between service operations. Pneumatic efficiency and compact actuation Actuation is pneumatic with a piston diameter of 18 mm, providing quick response and low inertia for short cycle times. The smaller piston size permits compact installation while still delivering substantial force, making the clamp appropriate for confined fixtures or multi-station jigs. Integration with standard compressed-air supplies is straightforward; pressure and flow requirements can be calculated from the piston diameter and required cycle rate. The mechanical simplicity of a push‑rod design also reduces potential failure modes compared with more complex actuators. Supply reliability and proven sourcing for industrial buyers Sourcing through an established partner adds operational value: Metav combines extensive product availability with industry-grade logistics, supporting just-in-time requirements and bulk procurement. The clamp’s specifications and material finish make it suitable for continuous production environments where repeatability and durability matter. Choosing a recognised supplier reduces procurement risk and ensures access to compatible components, spare parts and documentation, reinforcing compliance with internal quality standards. Contact Metav Werkzeuge to discuss incorporating the Kukamet pneumatic push-rod clamp 641 into existing fixtures or to request technical integration advice from our specialists Technical data SKU: 641-4-Q18 GTIN: 8680731503067 eClass: 21041716 ETIM: EC011973 Facts Maximum push force: 4,500 N Maximum holding force: 8,800 N Piston diameter: 18 mm Weight: 2.57 kg Special features Pneumatic actuation Horizontal foot mounting Galvanised finish Cast body construction Category: Clamping device Manufacturer: Kukamet FAQ What is the maximum clamping force of this clamp? The clamp provides a maximum push force of 4,500 N and a holding force of 8,800 N, as specified for the Kukamet Pneumatic Push-rod Clamp 641 (SKU 641-4-Q18). Can the clamp be mounted on standard tooling plates? Yes, the horizontal foot mounting is designed for attachment to common tooling plates and fixture bases, enabling straightforward integration into jigs and assemblies. Is the finish suitable for humid workshop environments? The galvanised surface and cast body offer improved corrosion resistance, making the unit suitable for typical workshop conditions where occasional moisture or coolant exposure occurs. What pneumatic connection and performance can be expected from the piston diameter? With a piston diameter of 18 mm, the clamp requires standard compressed-air supply parameters; this compact actuator achieves quick response times while providing the rated clamping force for efficient cycle rates. Does the clamp support heavy-duty production use? The combination of a cast body, galvanised finish and the specified holding force makes the clamp appropriate for continuous production and repeatable machining tasks where long-term stability is required. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
18mm Push Rod Clamp 4.5kN Push Force, 8.8kN Hold Force, Zinc Plated Cast Body - Kukamet
Take advantage of the combination of robust construction, reliable clamping force and compact installation for efficient fixture work; order the clamp directly via Metav Werkzeuge or consult our specialists for application advice. Push-rod clamp 532 — Kukamet push-rod clamp with horizontal foot and 4,500 N pressing force The Push-rod clamp 532 is a compact push-rod clamp designed for horizontal mounting in fixtures and jigs, providing a predictable clamping action for assembly and machining applications. Galvanised cast body for durability Horizontal foot mounting for fixture integration 4,500 N pressing force and 8,800 N holding force Pressure spindle M10x70 with piston Ø18 mm Robust construction that keeps fixtures running The galvanised cast body delivers long-term resistance to workshop conditions while maintaining dimensional stability for repeatable results. With a 4,500 N pressing force and an 8,800 N holding force, this clamp supplies the performance required for light- to medium-duty production tasks. The heavy-duty cast construction reduces deformation under load, which translates into consistent clamping behaviour and fewer re‑setups on production lines. Corrosion protection through galvanisation supports longevity in environments where coolant splash or humidity are present. Compact mounting and straightforward operation save assembly time Fitted with a horizontal foot and a pressure spindle M10x70, the clamp is engineered for simple integration into existing fixtures and welding jigs. The piston Ø18 mm provides a compact stroke profile, while the device’s low mass (approx. 1.06 kg) eases retrofitting and reduces inertia on moving sub-assemblies. Pressing force denotes the force applied to the workpiece during clamping; holding force indicates the clamp’s retention capability when engaged. This distinction helps in selecting the appropriate model for machining, assembly or inspection fixtures where secure positioning and rapid actuation are essential. Reliable repeatability for workshop and small-series production Engineered for frequent cycles, the mechanism offers dependable repeatability that cuts setup times and minimises scrap. The push-rod format is particularly suitable where a straight-line clamping action is required without adding bulk, and the compact design leaves more space for tooling and material handling. Made with practical workshop needs in mind, the clamp supports efficient jig design and tight fixture layouts, helping maintain throughput in small-series production and repair shops while delivering the robustness expected in industrial applications. Contact Metav Werkzeuge for tailored fixture recommendations and to arrange delivery of the Kukamet Push-rod clamp 532; eMail info@metav-werkzeuge.com or call +49 2822 7131930 for technical consultation and fast supply from Emmerich. Technical data Article number / SKU: 532-4-Q18 GTIN: 8680731504477 ECLASS: 21041716 ETIM: EC011973 Facts Maximum pressing force: 4,500 N Maximum holding force: 8,800 N Piston diameter: 18 mm Mass: 1.06 kg Special features Mounting type: horizontal foot Pressure spindle: M10x70 Material: galvanised with cast body Category: Spanner FAQ What is the difference between pressing force and holding force? Pressing force describes the load applied to the workpiece during the active clamp stroke, while holding force indicates the retention capacity once the clamp is engaged; the Kukamet Push-rod clamp 532 lists 4,500 N pressing force and 8,800 N holding force. Can the clamp be mounted on a custom fixture base? Yes. The horizontal foot design of the Push-rod clamp 532 is intended for straightforward attachment to bespoke fixture plates and jigs for assembly or machining. Is the clamp suitable for use in humid or coolant-exposed environments? The clamp’s galvanised cast body provides improved corrosion resistance, making the model suitable for workshop conditions where occasional coolant or humidity is present. What are the spindle and piston specifications for adjustment and travel? The unit is equipped with a pressure spindle M10x70 and a piston diameter of 18 mm, offering compact stroke geometry for tight fixture layouts. How heavy is the clamp and does its weight affect integration? With a mass of approximately 1.06 kg, the clamp is lightweight enough for easy retrofit into tooling assemblies while remaining robust for repeated clamping cycles. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
18mm Push Rod Clamp Horizontal Foot 4.5kN Push Force 8.8kN Hold Force Zinc Cast Body - Kukamet
Reliable clamping performance is achieved through the combination of a zinc-plated cast body and up to 8,800 N holding force, delivering secure fixturing for production and workshop applications. The compact, 1.06 kg construction with an M10×70 pressure spindle enables straightforward integration into existing jigs. Order the 536 pushrod clamp directly via Metav Werkzeuge or consult our specialists if further specification is required. 536 pushrod clamp by Kukamet — 8,800 N holding force, zinc-plated cast body The 536 is a horizontal-foot pushrod clamp designed for robust workholding in production fixtures and workshop benches, combining high holding force with compact dimensions for flexible integration. Zinc-plated cast body for durability 8,800 N maximum holding force 4,500 N max pressing force M10×70 pressure spindle Horizontal-foot mounting Secure hold for heavy-duty fixturing High mechanical retention is provided by the clamp’s 8,800 N holding force, ensuring that components remain stationary during machining, assembly or inspection. The difference between holding force and pressing force is important here: the former refers to the maximum retention once clamped, while the latter—4,500 N—indicates the maximum force the pressure spindle can apply during engagement. This distinction helps when specifying a fixture for repetitive operations or for parts subject to lateral loads, offering a predictable safety margin for stable processing. Compact integration that saves space and time With a weight of 1.06 kg and a horizontal-foot mounting arrangement, the clamp fits into confined fixture layouts without adding excessive mass. The M10×70 pressure spindle provides a standardised interface for adjustment and actuation, allowing quick retrofitting to existing jigs and modular clamping plates. The compact footprint reduces interference with tooling paths and simplifies handling during setup, which supports faster changeovers and improved throughput in small-batch or mixed-production environments. Built to last with low maintenance demands Manufactured with a zinc-plated cast body, the unit resists corrosion and mechanical wear while keeping maintenance intervals minimal. The robust cast construction distributes load effectively and reduces the risk of deformation under repeated use. For routine upkeep, visual checks of the spindle and lubrication points are sufficient; the design avoids complex maintenance procedures, helping to reduce downtime and service costs over the life of the fixture. Practical benefits and typical applications As a pushrod-style clamp with a horizontal-foot base, this device is suited to general workshop fixturing, assembly benches and small machining fixtures where reliable lateral stability is required. The combination of compact mass and high retention force makes it appropriate for holding machined parts during drilling, welding preparation and quality inspection tasks. The unit’s standardised spindle and mounting arrangement streamline replacement and interoperability across fixture designs. For durable and proven workholding with Kukamet quality, contact Metav Werkzeuge for tailored advice and procurement assistance: info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number / SKU: 536-4-Q18 GTIN: 8682843521274 Brand: Kukamet Weight: 1.06 kg Material: Zinc-plated with cast body ECLASS: 21041716 ETIM: EC011973 Core technical figures Maximum holding force: 8,800 N Maximum pressing force: 4,500 N Piston / spindle diameter: 18 mm Pressure spindle: M10×70 Design and special features Horizontal-foot mounting Pushrod / lever clamp type Zinc-plated cast body Compact, low-mass construction FAQ What forces are relevant when choosing this clamp? The most relevant figures are the 8,800 N holding force and the 4,500 N pressing force; the first indicates retention once clamped, the second the maximum actuation load applied by the pressure spindle on the 536 pushrod clamp. Is the clamp suitable for installation on modular tooling plates? Yes, the horizontal-foot mounting and the standard M10×70 pressure spindle allow straightforward integration into modular plates and fixtures for workshop and light production use. How heavy is the unit and how does that affect fixture design? The clamp weighs 1.06 kg, which keeps the fixture mass low and reduces dynamic load on moving assemblies while maintaining high retention for stable machining and assembly. What material protection does the clamp provide against corrosion? The device features a zinc-plated cast body, offering enhanced resistance to corrosion and mechanical wear in typical workshop environments. Which SKU should be referenced when ordering spare parts or replacements? Reference the SKU / article number 536-4-Q18 to ensure correct specification and compatibility when ordering replacements or spares. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
18mm Quick-Change Insert SES 14.5mm Square Drive, Adjustable Safety Clutch, For DIN 374/376 M22 - TECWERK
Take advantage of the combination of an adjustable torque-limiting safety clutch, robust square-shaft torque transmission and compact dimensions to protect taps and reduce production interruptions. Order the insert directly via Metav Werkzeuge or contact our advisers for application guidance. Quick-change insert SES 18 mm x 14.5 mm Size 2 for DIN 374/376 M22 (TECWERK) The Quick-change insert SES 18 mm x 14.5 mm Size 2 is a compact adaptor designed to protect thread taps during manual or machine tapping, offering torque limitation and secure torque transfer for consistent threading in workshop and industrial environments Adjustable torque-limiting safety clutch Reduces risk of tap breakage Torque transmitted via 14.5 mm square shank Compatible with DIN 374/376 M22 taps Protects taps and reduces downtime The Quick-change insert SES 18 mm x 14.5 mm Size 2 features an adjustable safety clutch that limits torque to a preset value, significantly reducing the risk of tap breakage when a sudden load occurs. By preventing tool failure at the point of threading, the unit contributes directly to fewer stoppages and lower repair or replacement costs. For production environments where consistent thread quality and uptime matter, this torque-control function delivers a clear operational advantage. Reliable torque transfer for accurate threading Torque is transferred via the 14.5 mm square shank, which ensures a direct and backlash-minimised connection between spindle and tap. The result is repeatable torque transmission and improved thread quality, especially important when working with tougher materials or long engagement depths. Explaining the mechanism: the square shaft engages positively with the tool holder so that torque is passed mechanically rather than relying on friction, reducing slippage and the need for corrective rework. Compact design for flexible integration With compact external dimensions, the insert is easy to integrate into existing tap holders and hand tools. Key dimensions such as D: 50 mm, L1: 32 mm and L3: 30.5 mm keep the overall profile small while preserving functional length for secure engagement. This compactness allows installation in confined fixtures and reduces leverage that can stress the tap, supporting steadier tapping cycles in constrained assemblies. Compatibility and practical application Designed for tapping to DIN 374/376 M22, the insert suits common metric tap sizes used across maintenance, repair and production shops. The unit’s construction permits use with different shaft sizes when matched with the corresponding inserts, offering modularity for multi-shank toolrooms. Supplied as a single unit per packaging, the insert provides a straightforward retrofit for operations seeking improved tap protection without extensive changes to tooling setups. Contact Metav Werkzeuge for tailored advice and secure the TECWERK quick-change insert with adjustable safety clutch from our Emmerich service team at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 4000832683NW Designation: Quick-change insert SES 18 mm x 14.5 mm Size 2 for DIN 374/376 M22 Product type: Quick-change insert SES Manufacturer: TECWERK Packaging unit: 1 Core dimensions Diameter D: 18 mm Square shank: 14.5 mm L1: 32 mm L3: 30.5 mm L4: 35 mm L5: 34 mm D1: 31 mm Overall diameter: 50 mm Special features Adjustable safety clutch for torque limiting Prevents thread tap breakage Torque transmitted via shaft square For different shank sizes, various inserts required Suitable for DIN 374/376 M22 taps FAQ What is the primary function of this quick-change insert? The quick-change insert SES 18 mm x 14.5 mm Size 2 protects taps by limiting torque via an adjustable safety clutch, reducing the likelihood of breakage during threading. Which tap standards are supported by this insert? This insert is suitable for taps to DIN 374/376 M22 and is intended for use where that metric standard is required. How is torque transmitted through the unit? Torque is transmitted mechanically via the 14.5 mm square shank, ensuring positive engagement and minimised slippage during tapping. Can the torque limit be adjusted for different materials? Yes. The adjustable safety clutch allows the torque threshold to be set to match the demands of different materials and tap sizes, providing flexibility in application. Is this insert supplied individually or in sets? The item is supplied as a single unit per packaging (packaging unit 1) and can be ordered individually. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund
Secure components with reliable workpiece clamps
Workpiece clamps, also known as workholding clamps or workholding devices, form the essential mechanical interface between machine and part in industrial fabrication. They keep components absolutely play-free, positionally accurate and vibration-resistant during milling, turning, drilling or grinding.
How workpiece clamps ensure process stability
A correctly specified clamping concept transfers the high cutting and feed forces of modern CNC machines into the machine table or spindle without deforming the part. The right combination of mechanical, hydraulic, pneumatic or magnetic solutions enables fast, repeatable setups and supports automated part change where required. Typical applications range from single-part turning to high-volume series milling and complex five-axis machining.
Concrete production benefits at a glance
- repeatable positioning: reduces scrap and rework
- high clamping forces: withstands aggressive cutting without part movement
- reduced set-up time: modular systems and quick-change features speed throughput
- improved surface finish: vibration damping for finer results and tighter tolerances
- flexible compatibility: vices, chucks, clamping plates and zero-point systems for diverse geometries
Why Metav's range is the practical choice
Metav combines decades of specialist know-how with a broad, handpicked range that democratises precision for workshops and industry alike. Based in Emmerich, Metav acts as a quality filter for the European market and supplies more than 250,000 products from precision metrology to complete workshop equipment. With the trust of over 48,000 customers, Metav offers a single-source approach that reduces supplier complexity and secures dependable delivery to your workbench.
Technical data
- function: mechanical interface between machine and workpiece
- primary requirements: absolute positional accuracy; vibration reduction; high clamping forces
- technologies: mechanical, hydraulic, pneumatic, magnetic
- typical components: machine vices; chucks; clamping plates; zero-point systems; pratzen; clamping jaws
- application areas: milling; turning; drilling; grinding; automated part change systems
- production benefits: reduced set-up time; enhanced process security; optimised series and single-part production
The practical summary
Workpiece clamps bring the stability and repeatability required to meet tight tolerances and excellent surface quality, making them indispensable across machining operations. Choosing the right workholding clamps and modular workholding devices is a decisive step towards higher productivity and consistent part quality.
FAQ
What types of workpiece clamps are suitable for automated machining?
Workholding clamps with quick-change modules, hydraulic actuation or magnetic systems are commonly used for automated machining. These workholding devices enable fast, repeatable part changes and integrate with zero-point systems.
How do workpiece clamps affect surface finish and tolerances?
A stable clamping concept minimises vibration and part movement; this improves surface finish and supports achieving narrow tolerances when using high-precision workpiece clamps or workholding devices.
Can the same workpiece clamps handle different part geometries?
Modular workholding clamps and adaptable clamping jaws allow flexible fixturing for varied geometries; combining vices, clamping plates and pratzen increases versatility on the shopfloor.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com