Secure and precise workholding for metalworking productivity
Workholding devices such as workpiece clamps and chuck systems provide absolute positional stability and vibration damping during milling, turning, drilling and grinding, ensuring parts remain free of play under high CNC cutting and feed forces. By transferring clamping loads into the machine table or spindle without deforming the component, a well engineered workholding solution improves machining accuracy, surface finish and process reliability while reducing set-up times. Modular systems from machine vices and chucks to zero-point systems and specialised fixtures enable fast changeovers and support both serial and single-part production, delivering consistent clamping force, repeatability and enhanced throughput.
191mm Vertical Clamp 3,000N Closing Force, Massive Holding Arm With Safety Lock, Galvanised - Kukamet
Take advantage of a massive holding arm and safety lock combined with a galvanised finish and a holding capacity of up to 3,300 N to secure fixtures reliably; order the clamp directly via Metav Werkzeuge or ask the consultants for application advice. Vertical clamp 213 – Kukamet vertical clamp with 191 mm arm and galvanised finish The Vertical clamp 213 is a compact vertical clamping device designed for workshop fixtures and production jigs, offering robust fixation where repeatable, secure clamping is required. Massive holding arm with safety lock Galvanised finish for corrosion resistance Holding force up to 3,300 N Lightweight 0.93 kg with 191 mm arm Reliable clamping performance for production workflows The vertical clamp delivers clear, quantifiable performance: a holding force of 3,300 N and a maximum pressing force of 3,000 N, making it suitable for repetitive fixture tasks and light industrial assembly. These numerical limits define the operational envelope and enable planners to calculate safety margins precisely. The massive holding arm paired with a safety lock reduces the risk of accidental release during machining or handling, which supports uninterrupted production and fewer process interruptions. Technical compatibility with standard jig layouts is straightforward because the clamp mounts via an angled foot interface that suits common fixture plates. Durable materials and compact design that save space Constructed in galvanised steel, the clamp is protected against corrosive shop environments without adding bulk. At just 0.93 kg and with a 191 mm arm, the unit combines low mass with reach, allowing secure clamping in confined setups or on movable fixtures. The compact footprint lowers the likelihood of collision with tools or workpieces while preserving the required clamping leverage. The durable surface finish minimises maintenance and extends service life, which reduces downtime and the need for frequent replacements — a practical benefit for workshop managers who balance cost and uptime. Practical handling and installation advantages The angled base mounting simplifies integration into existing jigs and makes positioning repeatable across multiple stations. The safety lock provides tactile confirmation of engagement, supporting operator confidence and faster cycle times when multiple clamps are used in sequence. Lightweight construction and the robust arm design together enable easier manual handling during setup without sacrificing clamping capacity. For applications where consistent, secure fixation matters — such as assembly, light machining or inspection fixtures — this clamp offers a straightforward, mechanical solution with minimal auxiliary components. Choose the Kukamet vertical clamp 213 for dependable, compact clamping and contact Metav Werkzeuge for tailored selection and procurement assistance directly from Emmerich Technical Data SKU: 213-4-D-L-C3 GTIN: 8680731502084 Manufacturer: Kukamet Facts Weight: 0.93 kg Arm length: 191 mm Maximum pressing force: 3,000 N Maximum holding force: 3,300 N eClass: 21041717 ETIM: EC011973 Special features Mounting: angled foot Material: galvanised steel Massive holding arm Safety lock Category: clamping device FAQ What clamping force can be expected from this vertical clamp? The clamp provides a holding force of up to 3,300 N and a pressing force of up to 3,000 N, making the Vertikalspanner 213 suitable for many fixture and assembly tasks. Is the clamp suitable for use in corrosive workshop environments? Yes, the galvanised finish protects the clamp against corrosion and reduces maintenance needs, which helps preserve performance in damp or chemically exposed environments. How is the clamp mounted to a fixture plate? The clamp is designed for angled foot mounting, allowing straightforward integration into standard jig plates and repeatable installation across multiple stations. Can the clamp be used where space is limited? With a compact design, a lightweight build of 0.93 kg and a 191 mm arm, the unit fits well in confined setups while still delivering substantial clamping capacity. Does the product include a safety mechanism to prevent accidental release? A mechanical safety lock is integrated to secure the clamping position and provide tactile confirmation of engagement during operation. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
191mm Vertical Clamp 3000N Closing Force, Massive Arm with Safety Lock - Kukamet
Combining a massive holding arm with a built-in safety locking mechanism, this clamp secures workpieces with up to 3,000 N clamping force and a 3,300 N holding capacity, promoting reliable throughput in repetitive assembly and fixturing tasks; order the unit via Metav Werkzeuge or consult our specialists for application advice. Kukamet vertical toggle clamp 213 — heavy-duty vertical clamping with safety lock The Kukamet vertical toggle clamp 213 is a vertical toggle clamp designed for secure, repeatable clamping in jigs, fixtures and assembly benches, featuring a robust arm and integrated locking for safe operation Heavy-duty holding arm, 191 mm reach Safety locking mechanism included Holding force up to 3,300 N Angle-foot mounting for secure fit Improved production reliability through robust clamping The clamp’s heavy-duty arm and safety lock provide a tangible increase in process reliability, reducing re-clamping and stoppages. Built for clamping applications that demand consistent force, the device converts operator motion into a stable, locked hold, delivering a clamping force of 3,000 N and a holding force of 3,300 N. These figures mean fewer interruptions for adjustments and a measurable reduction in scrap from slippage, supporting higher throughput and predictable cycle times. Flexible mounting and reach for versatile fixturing Engineered with an angle-foot mounting, the clamp integrates easily into existing fixtures and lays out cleanly on flat plates or jigs. The 191 mm arm reach permits access to recessed or awkward components, enabling secure engagement where short clamps cannot reach. The toggle mechanism offers fast actuation for repetitive operations, which streamlines set-up and reduces cycle time—advantages that translate directly into improved operator efficiency and quicker job changeovers. Durable finish and lightweight design for long service life Finished in a blackened, burnished surface, the clamp resists wear and surface corrosion while providing a professional workshop appearance. At approximately 0.93 kg, the unit balances robustness with ease of handling during assembly or relocation. The combination of sturdy construction and modest mass reduces strain during fixture changes and contributes to long-term durability, making the clamp suitable for small-batch production as well as larger scale repetitive tasks. For dependable heavy-duty clamping and consistent delivery from Emmerich, contact Metav Werkzeuge to discuss the Kukamet vertical toggle clamp 213 and secure tailored advice for integration into existing fixtures. Technical Data SKU: B213-4-D-L-C3 Article name: Vertikalspanner 213 Manufacturer: Kukamet Facts Arm length: 191 mm Clamping force max: 3,000 N Holding force max: 3,300 N Weight: 0.93 kg Special features Angle-foot mounting Massive holding arm Safety locking mechanism Blackened finish FAQ What maximum clamping force does this clamp provide? The vertical toggle clamp offers a maximum clamping force of 3,000 N, with a holding capacity specified at 3,300 N, enabling secure retention in most fixturing applications. Is the clamp suitable for integration into existing jigs and fixtures? Yes, the angle-foot mounting and 191 mm reach make the clamp straightforward to mount on plates and jigs, and it is commonly used in standard fixture layouts. How does the safety locking mechanism work? The integrated safety lock mechanically secures the toggle in the closed position, preventing unintended release; this feature enhances operator safety and process stability when using the vertical toggle clamp. What is the surface finish and how does it affect durability? The unit has a blackened burnished finish which improves resistance to surface wear and mild corrosion, contributing to reliable service life in workshop environments. What are the manufacturer and responsible distributor details for this product? The clamp is produced by Kukamet and supplied via Metav Werkzeuge; see the manufacturer block below for full contact details. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
191mm Vertical Clamp 3000N Hold Force, Massive Arm, Zinc-Plated - Kukamet
Take advantage of a robust, galvanised clamping solution that combines a solid holding arm, a compact 191 mm reach and up to 3,000 N clamping force for repeatable fixture performance; order via Metav Werkzeuge or consult our specialists for installation guidance. Vertical clamp 213 — Kukamet vertical clamp with solid holding arm and galvanised finish The Vertical clamp 213 is a compact, galvanised vertical clamp designed for reliable hold-down duties in workshop fixturing and production jigs, combining a rigid arm and angle-foot mounting for versatile installation. Solid holding arm for secure clamping Galvanised finish for corrosion resistance Angle foot mounting for flexible installation Clamping force up to 3,000 N Consistent, measurable clamping for production use The design focuses on repeatability: the solid holding arm and precise geometry deliver stable positioning and consistent force, supporting efficient cycle times. With a rated clamping force of 3,000 N and a maximum holding force of 3,300 N, the device makes performance quantifiable and comparable in test setups and production fixtures. The compact mass and low overall weight also reduce inertial loads in automated sequences, making the clamp suitable for both manual jigs and semi-automated stations. Robust materials and straightforward mounting reduce downtime A galvanised finish provides corrosion resistance for everyday workshop environments, extending service life and lowering replacement frequency. The angle foot mounting enables mounting on vertical plates, T-slots or custom brackets, simplifying retrofit into existing fixtures. The 191 mm arm reach is engineered to clear nearby tooling while maintaining rigidity; the combination of finish, geometry and mounting flexibility translates directly into less maintenance and fewer interruptions for cleaning or rework. Practical benefits for workshop efficiency and safety Compact form and clear specifications make integration straightforward: lightweight construction (approx. 1.062 kg) minimises added mass, while the combination of holding and clamping ratings supports both static and dynamic applications. The clamp’s robust arm reduces the likelihood of part movement under load, improving first-pass quality and reducing rework. For procurement and inventory control, the clearly defined technical values facilitate selection against process requirements and harmonise with existing clamping systems. Contact Metav Werkzeuge for precise mounting recommendations or to request the Vertical clamp 213 (SKU 213-4-D-C3) and associated data sheets by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data SKU: 213-4-D-C3 GTIN: 8680731502053 Model designation: 213 Facts Arm length: 191 mm Clamping force: 3,000 N Holding force: 3,300 N Weight: 1.062 kg eClass: 21041717 ETIM: EC011973 Special features Material: galvanised Mounting type: angle foot Solid holding arm Category: clamp / clamping technology FAQ What clamping and holding forces does the clamp deliver? The Vertical clamp 213 provides a clamping force of up to 3,000 N and a holding force of up to 3,300 N, indicated for repeatable workshop fixturing. Is the clamp suitable for corrosion-prone environments? Yes, the galvanised finish on the Vertical clamp 213 improves resistance to corrosion and is intended for standard workshop conditions. How is the clamp mounted to a fixture? The clamp uses an angle foot mounting, enabling attachment to vertical plates, base plates or adapted fixture brackets for flexible positioning. What is the reach of the clamping arm? The arm length is 191 mm, offering clearance for common tooling while maintaining stability under load. Which SKU or article number is used for ordering and reference? Reference SKU 213-4-D-C3 when ordering or requesting technical documentation for this Kukamet vertical clamp. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
192mm Hydraulic Three-Point Chuck 3,600kgf Clamping Force, 2000rpm, 0.03mm Accuracy - Vertex
High clamping force and verified 0.03 mm runout provide stable, repeatable workholding for heavy machining; the robust 192 mm diameter design also supports high spindle speeds up to 2,000 r.p.m. Order the chuck directly via Metav Werkzeuge or consult our specialists for application advice. VSK-7 chuck – 192 mm diameter, 3,600 kgf clamping force (Vertex) A VSK-7 chuck designed for heavy-duty workholding in metalworking applications, combining high clamping capacity with precision suited to production environments Robust 192 mm diameter body High clamping force 3,600 kgf Precision runout 0.03 mm Rated up to 2,000 r.p.m. operational speed Consistent clamping for precision machining High clamping capacity and low radial deviation reduce part movement and rework, creating a reliable baseline for accurate turning and milling. The combination of 3,600 kgf clamping force and verified 0.03 mm runout means the workpiece is held firmly with minimal eccentricity; this translates into consistent surface finish and tighter tolerances across batches. For users less familiar with technical terms: runout describes how much the chuck allows the mounted part to deviate from true rotation, and a lower value indicates better repeatability and reduced scrap rates. Designed for production speed and operational stability Built to perform at elevated spindle speeds, the chuck is specified for operation to 2,000 r.p.m., allowing a balance between cutting parameters and throughput. The unit weight of 12.8 kg contributes to rotational stability while reducing vibration during machining, which benefits tool life and cycle consistency. For process planners, the measurable characteristics—diameter, clamping capacity and maximum speed—support predictable cycle times and machining strategies that favour efficiency and reduced downtime. Straightforward procurement and dependable sourcing for workshops Specification clarity and a defined SKU simplify procurement and stock management in the workshop environment. With the concise technical data available, the chuck can be evaluated against machine capabilities and production needs without guesswork. Sourcing via Metav Werkzeuge adds an additional quality filter for European customers, ensuring a reliable supply chain and documentation that supports certified installations and consistent repeat purchases Contact Metav Werkzeuge in Emmerich to discuss the Vertex VSK-7 chuck and confirm suitability for specific machines and production processes Technical data Article number: VSK-7 GTIN: 4061905096334 Manufacturer: Vertex Core data Diameter: 192 mm Clamping force: 3,600 kgf Accuracy / runout: 0.03 mm Maximum speed: 2,000 r.p.m. Weight: 12.8 kg Features Product type: chuck (workholding) Brand: Vertex eClass: 21020590 SKU: VSK-7 FAQ What clamping force does the chuck provide? The Vertex VSK-7 chuck delivers a clamping force of 3,600 kgf, suitable for heavy-duty workholding where strong grip is required. What level of precision can be expected from this chuck? The chuck is specified with a runout accuracy of 0.03 mm, offering repeatable concentricity for accurate turning and milling operations. What is the maximum recommended spindle speed? Rated operation for the chuck is up to 2,000 r.p.m., balancing rotational performance with safe handling and stability. Which diameter workpieces can be held? The chuck has a body diameter of 192 mm and is intended for applications where that size and the corresponding clamping capacity meet the machining requirements. How is this product identified for ordering and stock? The chuck is listed under SKU VSK-7 and GTIN 4061905096334 for procurement and inventory tracking. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
192mm Three-Jaw Self-Centring Chuck 3 Jaws, 3600 kgf Clamping Force, 2000 rpm - Vertex
Secure high-force workholding and consistent accuracy with this three-jaw chuck: the combination of 3,600 kgf clamping force and 0.03 mm accuracy supports stable turning cycles at up to 2,000 r.p.m. Benefit from robust machining performance and order procurement or ask Metav Werkzeuge's consultants for detailed application advice. VSC-7 3‑Jaw Chuck by Vertex — 192 mm, 3,600 kgf clamping force A VSC-7 three-jaw chuck engineered for secure, high-precision clamping in turning and lathe workholding applications. 192 mm nominal diameter 3,600 kgf clamping force 0.03 mm positioning accuracy Rated up to 2,000 r.p.m Secure clamping for reliable machining The three-jaw design delivers a centred, repeatable grip that shortens setup times and reduces the need for frequent re‑clamping. The combination of a 192 mm nominal diameter and 3,600 kgf clamping force ensures components remain stable under load, helping to maintain consistent part geometry during turning operations. This workholding unit is suitable wherever high clamping capacity is required to support productive, uninterrupted machining runs. Precision that improves process stability A declared accuracy of 0.03 mm provides a clear basis for predictable tolerances and consistent surface quality. At the specified maximum speed of 2,000 r.p.m., the chuck remains balanced for routine lathe cycles, which reduces vibration and extends tool life. Explaining the term: the quoted accuracy refers to radial runout and jaw repeatability, giving a measurable indicator for setup checks and quality control in repetitive production. Integration and maintenance advantages for the workshop The compact, three‑jaw configuration integrates easily into conventional lathe spindles and fits standard mounting dimensions for fast installation. The design supports straightforward maintenance routines, allowing routine inspections and reconditioning to be scheduled without complex procedures. Combined with Metav Werkzeuge’s quality filter for distribution in Europe, this unit contributes to a dependable supply chain and predictable machine uptime. For procurement or technical clarification on the Vertex VSC-7 three-jaw chuck, contact Metav Werkzeuge in Emmerich for tailored advice and supply options via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: VSC-7 GTIN: 4061905096051 EClass: 21020590 Manufacturer: Vertex Data Diameter: 192 mm Clamping force: 3,600 kgf Accuracy: 0.03 mm Max speed: 2,000 r.p.m. Special features 3‑jaw configuration Balanced for the specified maximum speed Designed for lathe turning workholding FAQ What clamping capacity does the chuck provide? The Vertex VSC-7 three-jaw chuck provides a clamping force of 3,600 kgf, suitable for high‑force turning tasks. What level of accuracy can be expected during operation? The chuck is specified with an accuracy of 0.03 mm, indicating tight radial runout and repeatability for consistent part quality. Which nominal diameter fits in standard lathe setups? The unit has a nominal diameter of 192 mm and is designed for integration with common spindle interfaces used for similar‑sized chucks. Is the chuck suitable for high‑speed turning? The VSC-7 is rated up to 2,000 r.p.m., and the design is balanced to maintain stability at that rotational speed. What information is available for ordering and technical queries? Metav Werkzeuge can provide further technical details and procurement guidance for the VSC-7; refer to the SKU VSC-7 and GTIN 4061905096051 when enquiring. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
194mm Extension Sleeve Morse Taper MT3 to MT2 Hardened Ground DIN 2187 - TECWERK
Take advantage of precise clamping and extended reach through the combination of DIN 2187 accuracy and a fully hardened, ground sleeve; ideal for repeatable setups and reduced tool wear. Order procurement or request technical advice via Metav Werkzeuge for a seamless supply and application support. Extension sleeve DIN 2187 MK3 to MK2 (hardened & ground) – TECWERK The Extension sleeve DIN 2187 MK3 to MK2 is a morse taper adapter designed to extend tool reach while maintaining DIN 2187 accuracy for workshop and production toolholding applications. DIN 2187 accuracy class Hardened and ground inside/outside Morse taper MK3 to MK2 194 mm total length for deep reach Maintain machining accuracy with standard-compliant taper connection The adapter is manufactured to DIN 2187, ensuring a standardised interface between spindle and tooling. By providing a reliable Morse taper connection from MK3 to MK2, the sleeve supports consistent concentricity and repeatable positioning across batches. This standard conformity reduces setup variation, which in turn lowers scrap rates and stabilises cycle times in both workshop and series production environments. The component is therefore suited for use where predictable tool transfer and accuracy are required. Robust, hardened construction for long service life Made in an accuracy version with a fully hardened body and ground internal and external surfaces, the sleeve resists wear that typically increases runout over time. The hardened, ground finish preserves the fit between taper surfaces and reduces micro-movements under load, contributing to extended tool life and fewer rebalancing interventions. In practice, this durability translates into less frequent replacement and more continuous machine uptime, a clear advantage for demanding machining routines. Designed for deep-reach operations and straightforward integration With a total length of 194 mm (L2) and a projection length of 100 mm (L1), and an outer diameter of 30 mm, the sleeve provides additional reach for operations in recesses or on long tool engagements without compromising stability. The adapter is intended for tools with a Morse taper shank and is therefore a straightforward solution for adapting MK2 tools to an MK3 spindle or holder. Compatibility with standardised tooling makes it a practical choice when depth or accessibility would otherwise require non-standard setups. For reliable extension and standard-compliant toolholding, contact Metav Werkzeuge for procurement and technical advice — Metav Werkzeuge in Emmerich can provide delivery, specification support and further information via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 2000832335NW Manufacturer: TECWERK Standard: DIN 2187 Type: Extension sleeve (Morse taper adapter) Facts Total length L2: 194 mm Projection L1: 100 mm Diameter D: 30 mm Special features Accuracy execution according to DIN 2187 Fully hardened Ground inside and outside For tools with Morse taper (MK3 → MK2) FAQ Is this sleeve compliant with industry standards for taper adapters? Yes. The sleeve is manufactured to DIN 2187, ensuring standard-compliant dimensions and fit for taper connections. Which Morse tapers are connected by this adapter? The component mates an MK3 taper to an MK2 taper, enabling MK2 shank tools to be used with MK3 spindles or holders. What are the key dimensions to consider for depth-sensitive applications? Key dimensions are a total length L2 of 194 mm, a projection L1 of 100 mm, and a diameter D of 30 mm, which together determine reach and clearance. How does the hardened and ground finish affect performance? The fully hardened and ground surfaces preserve taper fit and reduce wear, improving long-term concentricity and decreasing the likelihood of runout. Can this sleeve be used for general workshop tooling without modification? Yes. The design follows DIN 2187 and is intended for direct use with tools that have a Morse taper shank, allowing straightforward integration into standard setups. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
195mm ER 40 Collet Set 23-Piece Ø4–26mm, Wooden Base, 5 µm Runout Accuracy - TECWERK
Take advantage of the combination of precise clamping, a wide 4–26 mm range and a protective wooden base for tidy storage; order the collet set directly via Metav Werkzeuge or ask our consultants if clarification is required. TECWERK ER 40 (472 E) Collet Set, 4–26 mm clamping range The Spannzangensatz ER 40 (472 E) is a complete ER40 collet set designed for use with collet chucks, offering a continuous clamping span from small to medium diameters and a high standard of runout control ER40 compatibility, 4–26 mm clamping range Runout and repeatability 5 µm Supplied in wooden base for secure storage Reliable precision that reduces rework and set-up time The set delivers consistent clamping with a specified runout and repeatability of 5 µm, which translates into measurable benefits on the shop floor: fewer scrap parts, reduced rework and tighter tolerances during milling or turning operations. For production environments where repeatability is essential, the collets offer a stable grip that keeps workpieces concentric under cut. The technical tolerance quoted indicates the typical deviation of spindle concentricity when the collet is correctly seated in a collet chuck, providing a clear reference for process control. Compact organisation and durable storage for busy workshops Presented in a wooden base, the set keeps individual collets organised and protected between shifts. The compact footprint supports efficient bench or cabinet storage, while the solid base minimises movement during transport. The 4–26 mm clamping span covers a broad range of common diameters, limiting the need for multiple partial sets and reducing changeover time. Clear labelling and arranged slots speed up tool selection and help maintain a tidy workflow on busy production lines. Designed for ER40 chucks and straightforward integration into tooling stations Compatibility with ER40 collet chucks ensures straightforward integration into existing tooling systems without modification. The set is intended for conventional clamping tasks where controlled concentricity and reliable repeatability are required; it suits both manual and CNC setups that accept ER40 tooling. The overall design emphasises practical workshop use: secure retention in the chuck, ease of replacement and stable clamping under moderate cutting forces, all of which contribute to predictable machining results. For dependable clamping across a wide diameter range, choose the TECWERK ER40 collet set — contact Metav Werkzeuge for product advice at info@metav-werkzeuge.com or call +49 2822 7131930 to confirm compatibility with specific chucks and machining tasks Technical data Article number: 2000832786NW Manufacturer: TECWERK Product type: Collet set Model: ER 40 (472 E) Clamping range: 4–26 mm Contents: 23 pieces Core data Runout / repeatability: 5 µm Dimensions: 195 x 25 x 290 mm Height: 25 mm Packaging unit: 1 Special features Supplied in wooden base Suitable for ER40 collet chucks Set covers 4–26 mm clamping range Staged collet filling for organised storage FAQ What tolerance can be expected when using this collet set? The runout and repeatability are specified at 5 µm for the Spannzangensatz ER 40 (472 E), indicating tight concentricity when the collets are used with a properly aligned ER40 chuck. Is this set compatible with standard ER40 chucks? Yes, the TECWERK ER40 set is intended for use with standard ER40 collet chucks and integrates without modification into ER40 tooling systems. Does the set include a storage solution for the collets? The assembly is supplied in a wooden base that secures and organises the collets, providing protection and easy access during routine operation. Can the collets withstand repeated workshop handling? The collets in the ER40 set are designed for regular workshop use; correct seating and handling maintain the specified performance over repeated cycles. What clamping span does the set cover? The set covers a continuous clamping span from 4 to 26 mm, delivering a flexible range suitable for common machining tasks. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund
195x140x110mm Demagnetiser One-Way AC-330VA 110V/220V - Vertex
Take advantage of fast, reliable demagnetisation with the combination of a compact footprint and robust 7.4 kg construction for continuous workshop use; the unit’s AC-330VA power rating and 110/220V compatibility provide stable performance. Order the VDM-68 Demagnetiser directly via Metav Werkzeuge or ask our consultants if needed. VDM-68 Demagnetiser by Vertex – AC-330VA, 110/220V The VDM-68 is a one-way demagnetiser designed for bench-top removal of residual magnetism from tools and small components in industrial and workshop environments Compact one-way demagnetiser design AC-330VA power rating Dual voltage 110/220V compatibility Robust 7.4 kg metal housing Fast, dependable demagnetisation that preserves tool accuracy The compact demagnetiser delivers controlled demagnetisation using a rated AC-330VA supply, enabling consistent removal of residual magnetism from ferrous tools and gauges. That reduction in residual magnetism helps to maintain measurement accuracy and milling or turning quality by preventing magnetic adhesion of swarf. The controlled, single-direction operation reduces the risk of partial demagnetisation cycles and supports predictable results in routine workshop processes. Simple integration and electrical compatibility for diverse setups With 110/220V supply compatibility, the unit fits a wide range of mains environments without additional transformers, easing deployment across multiple workstations. Its moderate electrical rating supports repeated short cycles typical for production or inspection areas. The clear electrical specification makes planning for power distribution straightforward, and the single voltage selector simplifies setup for both 110 V and 220 V systems. Compact footprint for bench-top use and stable handling Measuring 195 x 140 x 110 mm, the device occupies minimal bench space while offering a substantial mass of 7.4 kg, which contributes to steadiness during operation. The compact dimensions make it suitable for installation close to inspection benches or tool rooms, reducing handling time and streamlining workflows. The unit’s physical robustness reduces the likelihood of vibration-related issues and supports secure placement in busy work environments. Built to fit workshop routines and reduce downtime The one-way design and solid construction focus on reliability and repeatability, which in turn minimise interruptions to production. The device’s compact design supports quick placement and retrieval of handheld tools or small components, helping to integrate demagnetisation as a standard step in quality assurance routines. Where consistent magnetic neutralisation is required, this unit offers a pragmatic balance of performance and practicality. For reliable, workshop-ready demagnetisation from Vertex, contact Metav Werkzeuge in Emmerich for a tailored supply solution or technical advice by email or phone Technical data Article number: VDM-68 GTIN: 4061905083105 SKU: VDM-68 Manufacturer: Vertex ECLASS: 21020801 Facts Dimensions: 195 x 140 x 110 mm Weight: 7.4 kg Power: AC-330VA Supply voltage: 110V/220V Special features Type: one-way demagnetiser Category: Vertex FAQ How does the demagnetiser remove residual magnetism? The VDM-68 demagnetiser reduces residual magnetism by applying an alternating magnetic field at the rated AC-330VA power level, which gradually neutralises remanent magnetisation in ferrous tools and components. Which mains voltages are supported? This unit accepts both 110 V and 220 V supply voltages, making the VDM-68 suitable for different regional power systems without extra conversion equipment. What are the physical dimensions and mass of the device? The VDM-68 measures 195 x 140 x 110 mm and weighs 7.4 kg, providing a compact footprint and a stable mass for bench-top operation. Is the demagnetiser suitable for large components? Given its compact dimensions, the VDM-68 is optimised for handheld tools and small components; larger workpieces will require assessment against the unit’s physical size and operational envelope. Who manufactures this demagnetiser and what is the product code? The device is produced by Vertex and sold under the SKU VDM-68, with GTIN 4061905083105 for identification and procurement Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
196mm Extension Sleeve MK2 to MK3 Hardened Ground to DIN 2187, D36mm - TECWERK
Take advantage of a DIN 2187‑compliant sleeve that combines precision, hardened construction and a compatible MK2–MK3 taper for reliable tool mounting; order directly via Metav Werkzeuge or consult the team for application guidance. Extension sleeve DIN 2187 MK2×MK3, hardened and ground — TECWERK The Extension sleeve DIN 2187 MK2×MK3 is a hardened and ground adaptor sleeve for extending reach and adapting tools with a Morse taper to an MK2 spindle, suited to precision workshop and industrial applications. DIN 2187 compliant accuracy version Fully hardened and ground inside and out MK2 outer taper to MK3 inner taper 196 mm overall length for extended reach Precision and repeatable concentricity for high‑accuracy machining The sleeve is designed to meet DIN 2187, ensuring a defined tolerance class for toolholders and adaptors. Manufactured as an accuracy version, the component is hardened and ground, which reduces deformation under load and preserves concentricity during repeated mounting cycles. This combination gives consistent run‑out performance and supports tight process tolerances in milling, drilling and turning operations, translating directly into lower scrap rates and fewer setup interruptions. Secure taper fit and clear dimensional compatibility for tool selection With an outer MK2 taper and inner MK3 taper, the adaptor permits use of smaller Morse‑taper tools in larger machine spindles without bespoke tooling changes. Key dimensions are D: 36 mm, L1: 121 mm and L2: 196 mm, offering a long‑reach option where extra clearance or accessibility is required. The construction suits tools with a Morse taper, maintaining a positive mechanical fit that simplifies changeover and preserves clamping reliability in production environments. Durable construction to reduce downtime and maintenance Built fully hardened and ground inside and out, the sleeve stands up to workshop stresses and resists wear over prolonged use. The robust finish reduces fretting and abrasive wear at contact surfaces, extending service life and cutting maintenance intervals. Reliability in the toolholder interface contributes to smoother machining, less vibration and a reduced need for rework — benefits that support efficient shopfloor routines and stable process outputs. Contact Metav Werkzeuge for availability and application advice on the TECWERK extension sleeve (SKU 2000832325NW) — call +49 2822 7131930 or email info@metav-werkzeuge.com to request technical details or ordering support Technical Data Article number: 2000832325NW Description: Extension sleeve DIN 2187 MK2×MK3, hardened and ground Manufacturer: TECWERK Facts D: 36 mm L1: 121 mm L2: 196 mm Packaging unit: 1 Special features DIN 2187 Accuracy version Fully hardened Ground inside and out For tools with Morse taper MK2 outer taper MK3 inner taper FAQ What materials is this sleeve suitable for when used in machining applications? The extension sleeve is a mechanical adaptor and does not limit material choice; when fitted as intended the TECWERK extension sleeve (MK2×MK3, SKU 2000832325NW) supports machining of steels, non‑ferrous metals and typical workshop materials depending on the mounted tool and machine settings. How does DIN 2187 classification affect workshop use? DIN 2187 specifies dimensional and run‑out criteria for adaptors and sleeves; compliance for this TECWERK sleeve means predictable mating characteristics, consistent concentricity and suitability for precision toolholding in serial production. Is the sleeve suitable for long‑reach drilling and milling operations? Yes, the 196 mm overall length provides additional reach compared with standard sleeves, making it appropriate for applications that require extended clearance while retaining a secure taper fit. How should the sleeve be installed to ensure correct taper engagement? Clean all taper surfaces before assembly and ensure proper seating into the spindle; the hardened and ground finish on the sleeve promotes reliable contact. For specific mounting torque or retention systems consult Metav Werkzeuge for machine‑specific guidance. Can this adaptor be used interchangeably with other brands of Morse taper tooling? The sleeve follows DIN 2187 and is intended for standard Morse taper tooling; compatibility with other brands should be determined by verifying taper sizes and tolerances against the tool catalogue; reference SKU 2000832325NW when checking fit. Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund
196mm Morse Taper MT5 Shank With B18 Drill Chuck Mount, Hardened And Ground - TECWERK
Take advantage of a robust combination of MT5 taper fit, DIN 238 drill‑chuck compatibility and a fully hardened and ground finish for secure, repeatable chuck mounting; order the taper arbor directly via Metav Werkzeuge or consult the team for application advice. Taper arbor MT5 × B18 — hardened MT5 taper with DIN 238 drill‑chuck shank (TECWERK) Taper arbor MT5 × B18 provides a precise mounting solution for drill chucks on drilling and turning machines, optimised for repeated setups and secure toolholding. Taper MT5 for reliable chuck mounting DIN 238 drill-chuck shank compatibility Fully hardened and precision ground 196 mm overall length for extended reach Secure connection for consistent toolholding The MT5 taper construction ensures a firm mechanical interface that reduces radial runout and improves repeatability during serial operations. Because the arbor is supplied with a DIN 238 drill‑chuck shank, it directly accepts standard chucks, eliminating adaptors and saving setup time. This direct mount reduces spindle wear and supports consistent hole quality across batches, which is particularly important in production environments where each minute of downtime has a cost. Reduced setup time through precise finish A fully hardened and ground shaft provides a uniform contact surface that promotes accurate seating in the machine spindle and chuck. The precision finish lowers the need for frequent recalibration and minimises micro‑movement under load, so cycle times stay predictable and rework is less likely. For workshops that run mixed operations on drills and lathes, the arbor's compatibility and finish contribute to a measurable improvement in operational efficiency and component consistency. Durable design for everyday industrial use Built for routine use in machining environments, the taper arbor offers robust service life thanks to its hardened construction and precision grinding. The 196 mm overall length gives extended reach for deeper setups without compromising stability. Combined, these attributes deliver long‑term reliability and fewer tool changes, supporting uninterrupted workflows and a steady production rhythm that benefits both maintenance planning and throughput. For dependable chuck mounting with the TECWERK MT5 taper arbor and tailored application advice, contact Metav Werkzeuge for professional guidance and prompt supply from Emmerich Technical Data Article number: 2000832344NW Product: Taper arbor Manufacturer: TECWERK Standard: DIN 238 Facts Taper: MT5 Shank connection: B18 Overall length: 196 mm Special features With drill‑chuck shank DIN 238 Fully hardened and ground For mounting drill chucks on drilling and turning machines FAQ What taper and shank does the arbor use? The taper arbor uses an MT5 taper and a B18 shank designed for drill chucks with DIN 238 compatibility. Can this arbor accept standard drill chucks directly? Yes. The arbor is supplied with a DIN 238 drill‑chuck shank, so standard chucks fit directly without additional adapters. Is the surface treatment suitable for heavy duty use? The shaft is fully hardened and precision ground, providing a wear‑resistant contact surface suited to regular industrial application. What is the overall length and how does that affect setup? The overall length is 196 mm, offering greater reach for deeper set‑ups while maintaining stable seating and toolholding. Which product reference should be quoted when ordering or enquiring? Please quote the article number 2000832344NW and the designation taper arbor MT5 × B18 when contacting sales or technical teams. Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund
19mm 0.2-1.5mm Quick-Change Drill Chuck B6 Self-Clamping High Runout Accuracy, Hardened Replaceable Parts - ALBRECHT
Benefit from the combination of self‑centring clamping, a 0.2–1.5 mm clamping range and hardened, replaceable wear parts to secure consistent high‑precision performance; for procurement or technical queries consult Metav Werkzeuge. ALBRECHT SBF quick‑change drill chuck – 0.2–1.5 mm, B6 taper, right‑hand rotation A ALBRECHT SBF quick‑change drill chuck engineered for B6 taper spindles with right‑hand rotation, ideal for precision micro‑drilling and high‑repeatability applications. Self‑centring spindle for accurate runout Clamping range 0.2–1.5 mm Hardened, ground and replaceable wear parts B6 taper for secure spindle mounting Consistent accuracy for micro‑drilling tasks The ALBRECHT SBF quick‑change drill chuck offers a self‑centring mechanism that ensures reliably low axial and radial deviation when clamping small‑diameter tools. With a clamping range 0.2–1.5 mm, the chuck is tailored to micro‑drills and tiny end mills; this narrow range reduces slippage and improves concentricity. High clamping force minimises chatter and tool vibration, which directly benefits hole quality and repeatability in series production. Runout is a key parameter for small diameters: lower runout accuracy means longer tool life and fewer rejected parts. Durable, serviceable construction for lower downtime Built for sustained use under heavy demands, this chuck features hardened and ground components and replaceable wear parts. Such a construction reduces the need for whole‑unit replacements and enables predictable maintenance cycles. The case‑hardening and grinding of contact surfaces maintain precise seating between the jaws and body, preserving clamping performance over time. For workshops aiming to keep spindle uptime high, the ability to exchange wear items quickly translates into less production interruption and reduced total cost of ownership. Straightforward integration into precision workflows The chuck mounts via a B6 taper, providing a compact and secure connection to compatible spindles, and presents an outer diameter 19 mm for tight‑space installations. Designed for right‑hand rotation, it aligns with standard spindle directions in most machining setups. Its quick‑change nature shortens tool‑change cycles and supports higher throughput in small‑part manufacturing. Whether used in micro‑drilling, PCB machining or fine mechanical fabrication, this chuck simplifies tool handling and helps maintain process stability across repeated cycles. Contact Metav Werkzeuge for spindle compatibility checks and to arrange supply of ALBRECHT SBF quick‑change drill chucks Technical data Article number: 4120167201NW Brand: ALBRECHT Product type: Quick‑change drill chuck Type designation: SBF Packaging unit: 1 Core data Clamping range: 0.2–1.5 mm Outer diameter: 19 mm Taper: B6 Rotation direction: Right‑hand Special features Self‑centring operation Maximum clamping force With taper mounting Built for high continuous stress with top runout accuracy All wear parts case hardened, ground and replaceable Designed for right‑hand rotation FAQ What clamping range does the chuck cover? The ALBRECHT SBF quick‑change drill chuck covers a 0.2–1.5 mm clamping range suitable for micro‑drills and similar small tooling. Is the chuck self‑centring? Yes, the chuck is self‑centring, which promotes low runout and consistent concentricity when clamping small‑diameter tools. Can worn parts be replaced? Worn components are replaceable; all wear parts are case hardened and ground to allow targeted servicing without replacing the entire chuck. Which spindle taper is required? The unit mounts on a B6 taper, providing a compact, secure interface for compatible spindles. Is the chuck suitable for continuous operation under high load? The chuck is designed for high continuous stress and offers maximum clamping force with high runout accuracy to support demanding production environments. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
19mm 5C Collet, High-Precision 0.02mm Runout, 87mm Length - Vertex
Take advantage of the combination of precise runout control (0.02 mm), a 19 mm nominal diameter and straightforward integration into 5C tooling systems for reliable clamping in production and workshop environments. Order the collet directly via Metav Werkzeuge or consult our advisors for application-specific guidance. 5C collet — 19 mm, high repeatability (Vertex) A 5C collet designed for secure tool and workpiece clamping in workshops and light production, offering tight runout control and compatibility with standard 5C chucks. 5C clamping standard for broad compatibility 19 mm nominal diameter for precise seating Runout tolerance 0.02 mm for high repeatability Robust construction, weight 0.21 kg Consistent precision that protects process quality The clamping sleeve delivers repeatable concentricity, with a specified runout of 0.02 mm, ensuring tools and workpieces remain within narrow tolerance bands during machining. Low radial runout reduces vibrations and uneven wear, which in turn extends tool life and preserves surface finish. For production runs where consistent dimensions are required, the precision of the component contributes directly to fewer reworks and higher first-pass yield. The specification given here is a measurable indicator of performance and allows comparison with other clamping solutions on an objective basis. Seamless integration into 5C tooling systems Designed to the 5C standard, this collet fits established chucks and adaptors that accept 5C tooling. The 19 mm nominal bore and an overall length of 87 mm permit straightforward installation in compatible spindles and fixtures, minimising retrofitting time. The nominal dimensions and light mass (approximately 0.21 kg) simplify handling and changeover in busy shops. When assessing compatibility, refer to the listed nominal measurements and standard type to match the clamping system rather than relying on approximate sizes; this avoids assembly issues and ensures secure seating during operation. Built for dependable workshop use The component is manufactured to provide a balance of stability and serviceability for everyday shop demands. With clearly defined dimensional data and tolerance, the clamping element supports repeatable set-ups and predictable outcomes across batches. The relatively compact length and moderate weight reduce centrifugal effects at higher speeds, while the Vertex designation indicates an established supply chain and manufacturing oversight. For environments that prioritise dependable clamping without complex maintenance routines, this solution offers straightforward performance and long-term operational value. Contact Metav Werkzeuge in Emmerich for tailored application advice on the Vertex 5C collet (19 mm) and to secure reliable supply for the European market Technical data Article number: 5C-19 GTIN: 4061905089503 Brand: Vertex Facts Diameter: 19 mm Length: 87 mm Runout / accuracy: 0.02 mm Weight: 0.21 kg ECLASS: 21041712 Special features Collet type: 5C collet Standard: 5C SKU: 5C-19 FAQ What level of concentricity can be expected from this collet? The Vertex 5C collet achieves a runout accuracy of 0.02 mm, providing tight concentricity suitable for precision machining and repeatable setups. Will this collet fit existing 5C chucks and adaptors? Yes, the component is manufactured to the 5C standard and the 19 mm nominal bore is compatible with conventional 5C chucks and fixtures that accept that size. How does the collet affect tool life and surface finish? By maintaining low radial runout, the collet reduces vibration and uneven loading on the cutting edge, which helps to extend tool life and improve surface finish during machining. Is the collet suitable for high-speed spindles? The modest mass (approximately 0.21 kg) and standard dimensions support stable operation in many spindle applications; users should verify spindle speed limits and balancing requirements for their specific machinery. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
19mm Countersink DIN 6319D 120° For M16 Screws, 6.2mm Depth - AMF
Take advantage of a standardised seating solution that ensures secure seating for M16 fasteners, with a precise 19 mm bore and a 120° cone angle for consistent contact and predictable load transfer. Order the AMF countersunk washer directly via Metav Werkzeuge or consult the Metav technical team for application-specific advice. AMF Countersunk Washer DIN 6319D – precision cone seat for M16, 19 mm bore, 120° angle The AMF countersunk washer DIN 6319D is a standardised seating washer designed to provide a reliable cone seat for M16 screws in industrial and workshop fastening applications. DIN 6319D standardised geometry For M16 screws with 19 mm bore 120° cone angle for even seating Dimensions: D2 19 / D4 30 / H3 6.2 Consistent, standard-compliant seating for repeatable assemblies Conformity to DIN 6319D means a predictable seating geometry that reduces variations in assembly behaviour. The combination of a 19 mm bore and a 120° cone angle ensures the clamping surface meets the screw head accurately, which lowers the risk of uneven contact and localised stress. For production environments where repeatability is essential, this standardised geometry supports consistent torque behaviour and helps maintain component integrity over repeated cycles. Efficient load distribution that protects joint integrity Designed for use with M16 fasteners, the seating profile converts bearing loads into a broader contact area, promoting even load distribution and improving joint stability. The supplied dimensional data (D2: 19; D4: 30; H3: 6.2) indicates the washer’s seat and outer diameter proportions, which helps in selecting mating components and verifying fit in assemblies. Clear dimensional references make verification straightforward during incoming inspection and CAD validation. Simplified specification and reliable procurement for workshops The standardised specification reduces enquiry complexity when sourcing fasteners and seating elements for machinery or structural work. Specifying a DIN-compliant seating washer removes ambiguity in procurement documents and enables easy replacement throughout maintenance cycles. The compact design and single-piece form factor support rapid assembly while maintaining the precision expected in professional workshop and industrial contexts. Application-focused advantages for production and maintenance This seating washer is suitable wherever controlled seating of countersunk or conical-headed screws is required, particularly in structural joins and machinery mounts that rely on stable clamping forces. By using a component with defined geometry and documented dimensions, inspection protocols become more efficient and service life predictions more reliable, thereby supporting planned maintenance and quality assurance processes. For application guidance, availability of the AMF countersunk washer (DIN 6319D, SKU 4000833470NW) or bespoke quantity advice, contact Metav Werkzeuge — info@metav-werkzeuge.com or +49 2822 7131930 for prompt technical support and supply information. Technical data Article number: 4000833470NW Standard: DIN 6319D Brand: AMF Product type: Countersunk washer Suitable for: M16 Packaging unit: 1 Facts Bore diameter (D2): 19 mm Outer diameter (D4): 30 mm Height (H3): 6.2 mm Cone angle: 120° Suitable screw size: M16 Special features DIN 6319D compliant geometry Defined seat for conical screw heads AMF brand component Compact single-piece design FAQ What is the primary purpose of this countersunk washer? The countersunk washer provides a standardised cone seat for conical or countersunk screw heads; the AMF washer to DIN 6319D (SKU 4000833470NW) ensures consistent contact and predictable load transfer in assemblies. Which screw size is this seating washer compatible with? This seating washer is specified for M16 screws; the washer’s 19 mm bore matches the shank clearance while the 120° cone angle aligns with standard conical head profiles. How do the dimensional values D2, D4 and H3 relate to installation? D2 (19 mm) denotes the bore for the screw shank, D4 (30 mm) is the outer seat diameter and H3 (6.2 mm) indicates the seating thickness—these values aid in selecting mating parts and verifying fit during installation of the AMF countersunk washer. Is the washer suitable for repeated assembly and disassembly? Yes, the standardised geometry of the DIN 6319D seating washer supports repeated assembly cycles with consistent seating behaviour, helping to maintain joint integrity over maintenance operations. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
19mm Countersunk Washer For M16 Screws 120° Countersink Angle, DIN 6319G - AMF
Reliable seating with standardised geometry and a Ø19 mm bore delivers consistent clamping and repeatable alignment; compliance with DIN 6319G and the 120° cone angle simplifies assembly planning. Order this cone seat directly via Metav Werkzeuge or contact our consultants for application-specific advice. AMF cone seat DIN 6319G — conical washer for M16, Ø19 mm The AMF cone seat DIN 6319G provides a standardised conical seating solution for M16 screw connections, designed to ensure centred load transfer and secure seating in bolted assemblies. *DIN 6319G standardised cone seat *Suitable for M16 screw connections *Bore Ø19 mm for precise centring Precision seating that reduces rework and improves joint reliability The conical seat follows the DIN 6319G geometry to deliver a predictable seating surface and repeatable clamping behaviour. By matching the screw head to a defined 120° cone, the component promotes uniform load distribution across the joint and reduces the risk of misalignment. This consistency lowers the likelihood of assembly rework and supports quality assurance processes on the shop floor, especially where repeatable torque and preload are required. Clear dimensions for straightforward selection and planning Key measures such as the Ø19 mm bore, outer diameter Ø44 mm and height 7 mm provide unambiguous data for inventory and CAD planning. These dimensions enable quick verification against mating parts and countersinks, making the conical washer simple to specify for procurement lists and parts bins. The standardised form factor shortens procurement cycles and eases spare-part management in production environments. Practical use and benefits in everyday bolted joints Designed for M16 applications, the tapered washer improves seating with countersunk or tapered head fasteners where concentric load transfer is important. The component’s standard compliance supports interchangeability and integration into existing assemblies without custom machining. For workshops and maintenance teams, this means fewer bespoke parts, faster assembly times and more reliable mechanical behaviour under cyclic loads. For DIN‑compliant seating and reliable M16 assemblies, contact Metav Werkzeuge for stock availability and technical guidance — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: 4000833450NW Norm: DIN 6319G Item: Cone seat for screw M16, bore Ø19 mm, cone angle 120° Dimensions & key measures Bore diameter (D2): 19 mm Outer diameter (D4): 44 mm Height (H3): 7 mm Applications & compatibility Suitable for M16 Product type: Cone seat (conical washer) Brand: AMF FAQ What screw size is this cone seat intended for? The cone seat is intended for M16 screw connections and follows the DIN 6319G specification for conical seating. Which dimensions are essential to check before installation? Check the bore Ø19 mm, outer diameter Ø44 mm and height 7 mm to ensure compatibility with mating countersinks and head geometries. What does DIN 6319G compliance guarantee for assemblies? Compliance with DIN 6319G guarantees a standardised 120° cone geometry and consistent seating behaviour, aiding interchangeability and predictable clamping performance. Can this component be used with countersunk fasteners? Yes, the conical washer is suitable for use with tapered or countersunk head fasteners where a standard conical seating surface is required. Manufacturer: AMF; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
19mm Flange According To DIN 6331, M8x1.25 Thread, 13mm Height - Vertex
Take advantage of the DIN 6331 standardisation and the compact dimensions — M8 x 1.25 mm thread and 19 mm diameter — for reliable, repeatable joins in precision assemblies. Order the flange directly via Metav Werkzeuge or ask the consultants for application advice. Flange CFN0814 — DIN 6331, M8 x 1.25 mm thread (Vertex) A Flange CFN0814 intended for standardised mechanical joining in precision fixtures and assemblies, manufactured to DIN 6331 DIN 6331 compliant for standardised mounting Metric thread M8 x 1.25 mm for secure fastening Compact 19 mm diameter, 13 mm height Lightweight 15 g for minimal added mass Reliable alignment for repeatable assemblies The flange is engineered to deliver consistent alignment where interchangeability matters. Conforming to DIN 6331 ensures that mating components fit without bespoke machining, reducing setup time and variation in assembled parts. The combination of a defined thread form and precise outer diameter provides a predictable seating surface, which supports reproducible torque values and stabilises connections in fixtures and subassemblies. This predictability translates into measurable process benefits — fewer reworks and more stable production runs. Space-saving design that eases integration With a 19 mm diameter and a 13 mm profile, the component suits compact layouts where access and clearance are constrained. The small mass (approx. 15 g) minimises inertial load on moving subassemblies and contributes negligibly to bearing or drive demands. Because the part occupies limited axial and radial space, it can be integrated into tight clamping systems, jigs or precision fixturing without requiring design changes to adjacent components. The metric M8 x 1.25 mm thread provides a widely available fastening option that simplifies assembly logistics. Standardised compatibility reduces assembly errors Using a standardised flange removes guesswork from procurement and assembly planning. The standard designation signals compatibility across suppliers and tooling, making stock management and replacement straightforward. This component is suitable where a reliable mechanical interface is required and where adherence to established norms supports quality control processes. The clear dimensional references and thread specification aid inspection routines and permit quick verification during incoming goods checks. Supply confidence and a partner for precision Sourcing from a reputable brand such as Vertex and through a specialist distributor like Metav Werkzeuge supports continuity of supply and traceable quality. Metav acts as a quality filter for the European market, combining a broad product range with decades of application knowledge; this ensures that the flange arrives with the consistency expected for industrial use. For procurement teams and workshop managers, the emphasis on standard conformity and compact form factor makes this part a practical choice for both new designs and maintenance inventories. Contact Metav Werkzeuge to confirm compatibility with existing assemblies and to secure reliable delivery of the Vertex flange CFN0814; expert consultants can provide technical clarification and lead-time information Technical data Article number: CFN0814 GTIN: 4061905084409 eClass: 37029205 Manufacturer: Vertex Facts Diameter: 19 mm Height: 13 mm Thread: M8 x 1.25 mm Weight: 0.015 kg Special features Standard: DIN 6331 Compact flange for precision fixtures Metric fastening for broad compatibility Brand: Vertex FAQ What standard does this flange follow? The flange is manufactured to DIN 6331, which ensures standardised dimensions and interchangeability for compatible components, as used with the Vertex flange CFN0814. What are the critical dimensions to consider for integration? Key dimensions are 19 mm diameter, 13 mm height and the M8 x 1.25 mm thread; these determine fit and clearance in assemblies that use the Vertex CFN0814 flange. Can this flange be used in compact assemblies? Yes, the compact profile and low mass (approx. 15 g) make the flange suitable for tight layouts and lightweight subassemblies without significant added inertia. How does DIN 6331 compliance benefit production? DIN 6331 compliance simplifies procurement, inspection and replacement, reducing assembly errors and enabling reliable interchangeability across suppliers for parts like the Vertex flange CFN0814. Is material information available for this flange? Material details are not specified in the available data for this SKU; please consult Metav Werkzeuge for material verification and any application-specific recommendations. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
19mm Top Pot Magnet With M6 Blind Thread Hole 40 N Hold, AlNiCo 500 - TECWERK
Compact, heat-resistant magnetic fixing with reliable mounting: the combination of AlNiCo 500 material and an M6 threaded blind hole delivers a stable 40 N holding force for demanding industrial applications. Order the component directly via Metav Werkzeuge or consult our specialists if technical clarification is required. Topfmagnet D.20,6mm H.19mm mit Gewindesacklochbohrung – pot magnet, M6 thread, 40 N (TECWERK) The Topfmagnet D.20,6mm H.19mm mit Gewindesacklochbohrung is a compact pot magnet designed for secure attachments in elevated-temperature environments and threaded mounting applications. High-temperature resistance up to 450 °C Holding force 40 N AlNiCo 500 magnetic material M6 threaded blind-hole mounting Reliable magnetic fixing for high-temperature processes The pot magnet is manufactured from AlNiCo 500, a nickel–cobalt–aluminium alloy known for excellent thermal stability. This composition maintains magnetic performance at elevated temperatures, allowing reliable use up to 450 °C without rapid demagnetisation. For production processes that involve intermittent heating or proximity to ovens and furnaces, this magnetic holder offers stability where many permanent magnets lose strength. The material choice also reduces the need for frequent replacements, improving uptime in workshop and industrial settings. Compact, threaded design for secure installation With a diameter of 20.6 mm, a height of 19 mm and an M6 threaded blind hole, the unit is tailored for easy integration into fixtures, jigs and small assemblies. The 40 N holding force supplies predictable retention for light components and positioning tasks; this level of force is suitable for temporary anchoring and locating aids in assembly operations. The blind-hole thread allows a concealed, flush fit which simplifies mounting on metal plates or tool holders while preserving a neat appearance and minimising protrusion. Coating and processing compatibility for workshop use The component supports a coating process up to 200 °C, enabling lacquer or paint application without compromising the magnet’s integrity during finishing. The construction and finish make it suitable for repetitive handling and machine-side mounting where a small, robust magnetic fixing is required. Supplied as a single unit, the pot magnet is compact and ready for retrofitting into existing assemblies or inclusion in newly designed clamps. Its design balances compactness and function, offering an economic solution for fixtures that must tolerate elevated temperatures. For heat-resistant magnetic fixing in production or maintenance, specify the TECWERK pot magnet (SKU 4000832276NW) and contact Metav Werkzeuge in Emmerich for expert advice and ordering: info@metav-werkzeuge.com / +49 2822 7131930. Technical data Article number: 4000832276NW Product type: Pot magnet Manufacturer: TECWERK Packaging unit: 1 Facts Diameter: 20.6 mm Height: 19 mm Thread: M6 Holding force: 40 N Maximum magnet temperature: 450 °C Coating temperature: 200 °C Special features Material: AlNiCo 500 With threaded blind-hole bore Compact pot-style housing FAQ What maximum temperature can this pot magnet withstand? The TECWERK pot magnet can be used at temperatures up to 450 °C, thanks to its AlNiCo 500 composition, which preserves magnetic properties at elevated heat. Is the thread suitable for standard metric fastenings? Yes, the unit features an M6 threaded blind hole designed for conventional metric screws and secure mounting in fixtures. How strong is the magnetic hold in practical terms? The rated holding force is 40 N, offering reliable retention for light locating and temporary fixturing tasks within its compact dimensions. Can the magnet be painted or lacquered during production? The magnet supports a coating temperature up to 200 °C, allowing lacquer or paint application processes that do not exceed this temperature threshold. What is the product SKU for ordering or reference? The item is listed as SKU 4000832276NW, sold as a single unit (packaging unit 1). Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund
19x8mm Flange M8x1.25mm - Vertex
Compact, precision-threaded and ultra-light: the combination of M8 x 1.25 compatibility, a 19 x 8 mm profile and a weight of only 0.013 kg ensures reliable, space-saving fastening in compact assemblies; order this flange directly via Metav Werkzeuge or consult their advisors for application advice. Vertex flange — M8 x 1.25 threaded, 19 x 8 mm A Vertex flange for compact mechanical connections, designed to provide a secure M8 x 1.25 threaded interface in confined fixtures and assemblies M8 x 1.25 threaded connection Compact 19 x 8 mm footprint Extremely low weight 0.013 kg Space-saving connector that keeps assemblies compact The small footprint and standard thread profile allow this component to integrate into tight designs where every millimetre counts. With a defined M8 x 1.25 interface and a 19 x 8 mm body, the part offers a consistent mechanical datum for fixtures and sub-assemblies. The compact geometry reduces the need for additional counterbore or clearance space, enabling higher packing density on tool plates and within machine housings. The precise form factor supports repeated assembly and disassembly without compromising alignment. Consistent mechanical performance for secure fastening Thread conformity and dimensional consistency are central to predictable joint behaviour. The engineered thread pitch and diameter deliver repeatable clamping behaviour and minimise radial play, resulting in a reliably centred connection. Where positional accuracy and secure torque transfer matter, this component provides a predictable mechanical interface that supports stable load paths. The design reduces the likelihood of loosening under vibration when correctly torqued to the relevant fastener specification. Lightweight construction for reduced inertial load and easy handling At just 0.013 kg, the component contributes negligible additional mass to moving sub-assemblies, lowering rotating or reciprocating inertia and simplifying balancing tasks. The low weight also eases parts handling during assembly operations and stockkeeping logistics. Supplied as a straightforward mechanical element, it permits quick identification and straightforward replacement in maintenance routines, supporting efficient production workflows and minimal downtime. For reliable delivery of genuine Vertex components and application guidance, contact Metav Werkzeuge in Emmerich — their advisors can confirm compatibility with specific fixtures and recommend suitable quantities for production runs Technical data Article number: 4512 GTIN: 4061905083396 Name: Flange Brand: Vertex Core measurements Thread: M8 x 1.25 mm Dimensions: 19 x 8 mm Weight: 0.013 kg Other details Images available: 4518-main.jpg, 4518-detail.jpg, 4518-technische-zeichnung.jpg Category: Vertex FAQ Is this component suitable for standard M8 fasteners? The flange is specified with an M8 x 1.25 thread and is intended for use with standard M8 fasteners matching that pitch. What are the exact external dimensions for installation planning? The part measures 19 x 8 mm, which should be used when planning clearances and neighbouring component placement. How much does the component weigh for dynamic calculations? The listed mass is 0.013 kg, making it suitable where minimal added inertia is required. Are detailed images and a technical drawing available? Yes — the product is accompanied by image files and a technical drawing for reference during integration. Who manufactured the part and where can official specifications be verified? The component is supplied under the Vertex brand; official identification can be cross-checked using the GTIN 4061905083396 or article number 4512 Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
19x9mm Flange With 5/16-18" Thread, 13g - Vertex
Take advantage of a compact component that combines space-saving 19 x 9 mm dimensions with a standard 5/16-18" threaded connection for straightforward integration into existing assemblies; order directly via Metav Werkzeuge or contact our consultants for tailored advice. Flange 4512I – Compact threaded flange for precise mounting The Flange 4512I serves as a compact, standard-threaded flange intended for precise mechanical assemblies and light-load applications Compact dimensions 19 x 9 mm 5/16-18" standard thread Lightweight at 0.013 kg Space-saving design that simplifies assembly and inventory The compact geometry of this component, specified as 19 x 9 mm, reduces spatial requirements in tightly packed installations and simplifies fixture layout. The standard 5/16-18" thread ensures compatibility with widely used fasteners and mounting hardware, which shortens procurement cycles and minimises adaptor needs. For production planning, this compatibility translates into fewer part variants to stock and a lower risk of assembly errors, supporting faster throughput and predictable lead times. Low mass for reduced inertia and better balance in moving systems With a net mass of 0.013 kg, the flange contributes minimal additional inertia to rotating or moving subassemblies. This low weight helps to maintain dynamic balance where small mass differences can affect vibration and wear. The component is suitable for applications that require light, reliable connections without compromising alignment; the combination of compact form and low mass supports more stable operation and reduced maintenance intervals. Traceability and procurement made straightforward Marked by SKU 4512I and registered under GTIN 4061905093975, the part supports clear identification within stock systems and automatic ordering workflows. The availability of a detailed technical drawing and product imagery aids engineers and purchasers during selection and inspection phases, allowing quick verification of fit and function. The association with the Vertex brand signals established manufacturing standards and adds an extra layer of procurement confidence. Contact Metav Werkzeuge for matching accessories, stock availability and technical guidance on the Vertex Flange 4512I — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data SKU: 4512I GTIN: 4061905093975 Manufacturer: Vertex Specifications Dimensions: 19 x 9 mm Thread: 5/16-18" Weight: 0.013 kg Special features Compact flange design Standardised thread for broad compatibility Product images and technical drawing available FAQ What thread standard does this flange use? The flange uses a 5/16-18" thread, which is a common imperial specification suited to many standard fasteners. Is the component identifiable for procurement systems? Yes, the part is listed as SKU 4512I and carries GTIN 4061905093975 for unambiguous ordering and inventory control. What advantages does the low weight provide in assemblies? At 0.013 kg, the flange reduces added inertia in moving assemblies, helping to maintain balance and lower wear on bearings and supports. Are detailed drawings available for design verification? Technical drawings and product imagery are available for the flange to support design checks and fitment confirmation Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
1mm ER Collet 18mm Clamping Length, 5 µm Runout, Fits ER11 Chucks - TECWERK
The combination of standard-compliant fit and minimal runout ensures reliable clamping and consistent surface finish in compact tool arrangements; the 1 mm clamping diameter and 5 µm runout capability make this a practical choice for precision small-tool work. Order via Metav Werkzeuge or contact their consultants for application advice. ER 11 Collet 4008 E — ER 11 collet, 1 mm clamping diameter, TECWERK The ER 11 Collet 4008 E is a precision clamping sleeve designed for secure holding of small-diameter tools in milling and drilling setups, compatible with standard ER 11 collet chucks. DIN 6499-B compatible for standardised fit Held over full clamping length for stability Runout repeatability 5 µm for high accuracy 1 mm clamping diameter for micro tooling Consistent precision for fine-tooling tasks The collet offers exceptional concentricity, with a specified runout/repeatability of 5 µm, which reduces vibration and improves surface finish on small components. Because the sleeve is held along the full clamping length, the tool is stabilised over a greater contact area, lowering the risk of chatter and extending cutter life. These technical characteristics translate into fewer rejected parts and predictable machining results when working with small-diameter cutters and drills. Easy integration with ER collet systems Manufactured to DIN 6499-B dimensions, this clamping sleeve fits conventional ER 11 chucks without the need for intermediate sizes. The design permits clamping on the lead chamfer, offering flexibility when tools have shortened grip lengths or stepped shanks. This compatibility makes it straightforward to implement the collet into existing setups while maintaining the integrity of the toolholding system. Compact form for dense tool arrangements With a length of L 18 mm and an outer diameter of D 11.5 mm, the collet is suited to tight spindle spaces and multi-tool arrangements. The 1 mm clamping diameter and the specification that the clamping range bridges nominal minus 0.5 mm explain how slight undersize can be compensated, enabling secure holding of tools that are marginally under nominal size. This compactness supports higher spindle counts and closer tool spacing without sacrificing clamping reliability. For reliable small-diameter clamping and quick integration into standard ER 11 systems, request the TECWERK ER 11 collet via Metav Werkzeuge or consult the Metav Werkzeuge specialists for matching to specific machines and toolsets Technical Data Article number: 2000832848NW Brand: TECWERK Type: ER 11 collet Packaging unit: 1 Facts Clamping diameter: 1 mm Length L: 18 mm Outer diameter D: 11.5 mm Runout / repeatability: 5 µm Clamping diameter bridging: nominal minus 0.5 mm Special features Manufactured to DIN 6499-B Held along full clamping length Can be clamped on the lead chamfer Fits ER 11 collet chucks Round-run and repeat accuracy stated as 5 µm FAQ What tolerance can be expected for concentricity with this collet? The stated runout/repeatability for the TECWERK ER 11 collet is 5 µm, which provides tight concentricity for small-diameter tooling. Will this collet fit existing ER 11 chucks? Yes; the sleeve is produced to DIN 6499-B and is compatible with standard ER 11 collet chucks. Can tools with short shank lengths be clamped securely? The design allows clamping on the lead chamfer, so tools with reduced clamping length can still be held reliably. How does the clamping diameter bridging specification affect tool selection? The bridging value (nominal minus 0.5 mm) indicates the collet’s capacity to compensate for slight undersize, aiding secure grip on tools marginally under nominal diameter. What are the physical dimensions to check for spindle clearance? Key dimensions are L 18 mm and D 11.5 mm; verify these against the spindle and toolchanger envelope for compatibility. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
1mm ER16 Collet Precision Clamping Capacity 27mm Length, Nominal Minus 0.5mm - TECWERK
Take advantage of precise runout control and secure, full-length tool retention for consistent machining results. The combination of DIN 6499-B compatibility and small form factor ensures reliable repeatability and simple integration into ER 16 toolholding systems. Order the TECWERK ER 16 collet directly via Metav Werkzeuge or ask our consultants if needed. TECWERK ER 16 collet (Type 426 E) — 1 mm precision clamping sleeve The TECWERK ER 16 collet (1 mm, type 426 E) is a compact, high-precision clamping sleeve for ER 16 collet chucks, designed for demanding toolholding in metalworking applications. Precision runout 5 µm Full-length tool retention Compatible with DIN 6499-B systems Clamping diameter compensation: nominal − 0.5 mm Achieve consistent concentricity for improved surface quality and tool life The collet delivers a guaranteed runout and repeatability of 5 µm, which translates directly into improved surface finish and prolonged cutter life. Tight concentricity reduces vibration and tool deflection during high-precision machining, so parts are produced closer to tolerance first time. By choosing a clamping sleeve with documented runout performance, process stability and downstream inspection effort are reduced, supporting more efficient production cycles and fewer rejects. Secure retention and straightforward integration with ER 16 systems Designed according to DIN 6499-B, the clamping sleeve fits standard ER 16 collet chucks and requires no intermediate sizing. The tool is held along the full clamping length, and the sleeve can also be clamped on the chamfer when needed, which simplifies set-up for both short and slightly protruding tools. This combination of compatibility and full-length retention ensures reliable gripping across a range of tool geometries and reduces the need for frequent rework or adjustment. Compact dimensions and clear clamping guidance for everyday use With overall length 27 mm, nominal clamping diameter 1 mm and outer diameter 17 mm, the collet is optimised for compact toolholders and tight working envelopes. The effective clamping compensation is nominal minus 0.5 mm, a practical rule to ensure the correct fit and avoid overstressing the sleeve. Supplied per unit, the component is ready for immediate use and simple to inspect: visual checks for wear and verification of runout in the chuck are sufficient to maintain reliable performance over many cycles. For product availability, compatibility checks or tailored recommendations, contact Metav Werkzeuge in Emmerich by e‑mail at info@metav-werkzeuge.com or by phone at +49 2822 7131930 to arrange supply and expert advice. Technical Data Article number: 2000832910NW Type designation: ER 16 / 426 E Product: ER 16 collet Manufacturer: TECWERK Packaging unit: 1 Facts Runout / repeatability: 5 µm Nominal clamping diameter: 1 mm Length (L): 27 mm Outer diameter (D): 17 mm Clamping compensation: nominal − 0.5 mm Special features Compatible with DIN 6499-B Fits ER 16 collet chucks Tools held over full clamping length Can be clamped on the guiding chamfer Suitable for precise toolholding in metalworking FAQ What runout performance can be expected from this collet? The TECWERK ER 16 collet is specified with a runout and repeatability of 5 µm, providing high concentricity for precision machining. Is this collet compatible with standard ER 16 chucks? Yes — the clamping sleeve is manufactured to DIN 6499-B and is suitable for standard ER 16 collet chucks. Can the tool be clamped on the chamfer with this collet? Yes — the sleeve is designed so tools can be clamped along the full length or on the guiding chamfer when required. How should the clamping diameter be chosen for a secure fit? Use the nominal clamping diameter and account for the clamping compensation of nominal minus 0.5 mm to determine the proper fit and avoid overstress. What are the key dimensions to check when selecting this component? Verify the length 27 mm, nominal clamping diameter 1 mm and outer diameter 17 mm to ensure compatibility with the toolholder and tooling envelope. Manufacturer/Responsible: NORDWEST Handel AG; Robert‑Schuman‑Straße 17; 44263 Dortmund
1mm Prism Jaw VWS, Hardened Steel - Vertex
Combine stable, repeatable clamping and compact handling to improve setup times and machining consistency; order the prism jaw directly via Metav Werkzeuge or contact our consultants for application advice. VWS-VHO-6 Prism jaw (Prismenaufsatzbacke) by Vertex — prism profile, VWS system The VWS-VHO-6 prism jaw is a compact clamping accessory designed to support and locate cylindrical workpieces in modular jaw systems for workshop and light industrial use. Prism profile for cylindrical workpieces Compatible with VWS jaw system Lightweight workshop-ready at 1 kg Stable support reduces setup time and rejects The prism profile precisely locates cylindrical workpieces, converting an imprecise round contact into a defined support line so that centreline repeatability is improved and repositioning is faster. This reduces the need for secondary alignment operations, which in turn cuts non-productive time. The accessory is suited to situations where consistent workpiece support is required for turning, grinding or inspection fixtures and delivers measurable gains in cycle reliability. Seamless integration with modular clamping systems Designed for the VWS system, the jaw mates with existing modular fixtures to provide immediate functionality without bespoke adapters. Compatibility with the VWS family simplifies inventory and reduces changeover complexity, enabling shops to standardise clamping across multiple machines. The Vertex origin underlines component quality, while the pragmatic design supports efficient workflows and predictable repeatability for batch processing. Practical design for everyday workshop use At around 1 kg, the component is both lightweight and robust enough for routine handling; this balance aids quick mounting and safe storage when not in use. The prism geometry is straightforward to understand for operators with limited metrology experience: the vee-shaped contact creates a natural seat for round bars, preventing lateral movement without clamping force escalation. Minimal maintenance and straightforward cleaning keep the accessory ready for continuous operation. For procurement or technical clarification regarding the Vertex prism jaw VWS-VHO-6, please contact Metav Werkzeuge — Metav’s product specialists can advise on compatibility with existing fixtures and delivery options. Technical data Article number: VWS-VHO-6 GTIN: 4061905093210 Name: Prism jaw (Prismenaufsatzbacke) Manufacturer: Vertex Series: VWS Facts Weight: 1 kg eClass: 21029205 Special features Prism geometry for cylindrical parts Designed for VWS jaw system compatibility Gallery images available FAQ What is the primary purpose of this prism jaw? The prism jaw provides defined support and location for cylindrical workpieces, improving repeatability during clamping. Is the VWS-VHO-6 compatible with other modular jaw systems? The VWS-VHO-6 is manufactured for the VWS system; adaptability to other systems depends on fixture interface details and may require an adapter. How heavy is the accessory and does it affect handling? The accessory weighs 1 kg, making it easy to handle and quick to fit or remove in a workshop environment. Can the prism jaw be used for turning and inspection setups? Yes, the prism geometry is suitable for turning and inspection fixtures where stable, central support of round bars is required. Where can technical images or installation details be found? Gallery images and detail photos are supplied with the product listing to aid visual verification and installation planning. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
2 pcs 49.5×58×45.5mm Lamella Block Pair for Toolholding, Set - Vertex
Compact, precise and supplied as a two-piece set, the VCP-2 lamella blocks and prisms combine stable clamping with space-saving dimensions and reliable repeatability; the compact footprint supports tight setups while the modest weight keeps handling straightforward. Order the lamella blocks and prisms VCP-2 directly via Metav Werkzeuge or ask our consultants if needed. Lamella blocks and prisms VCP-2 — Vertex clamping set, compact 49.5 x 58 x 45.5 mm Lamella blocks and prisms VCP-2 provide compact, secure clamping for small components in machining, inspection and fixturing applications. Compact dimensions 49.5 x 58 x 45.5 mm Supplied as a two-piece set Total weight 1.2 kg for the set Stable clamping in a compact footprint The VCP-2 set delivers precision clamping within a remarkably small envelope. With external dimensions of 49.5 x 58 x 45.5 mm, the components fit into constrained fixture spaces without sacrificing stability. The modest combined mass (1.2 kg) helps to reduce inertial load during handling and repositioning, which benefits setups where quick changeovers are routine. The compact design supports high-density fixturing, allowing multiple clamping points to be placed close together and improving overall workpiece support. Reliable grip through lamella principle Built around a lamella design, the set uses interleaving lamella elements to generate even contact pressure and accommodate slight part irregularities. This architecture increases contact surface and reduces localised stress, leading to consistent repeatability across production runs. The two-piece configuration means the components are matched for pairwise operation, minimising setup variance and shortening machine downtime associated with re‑adjustment. Simple integration into common workflows The geometry and size make the clamping set suitable for milling, drilling and inspection fixtures where small parts require secure support. Because the units occupy little space, they enable denser tooling arrangements and fewer fixture reconfigurations, which contributes to improved throughput. The straightforward form factor also eases handling during assembly of jigs and reduces the learning curve for shop-floor personnel tasked with fixture construction. Durable performance and consistent results Designed for regular industrial use, the components are intended to provide long service life under standard workshop conditions. The lamella mechanism distributes load efficiently, reducing wear points and maintaining clamping performance over sustained cycles. This reliability supports predictable process outcomes and contributes to lower overall operational effort when compared with ad‑hoc clamping solutions. Contact Metav Werkzeuge in Emmerich for tailored application advice or to arrange supply of the Vertex VCP-2 lamella blocks and prisms directly from stock — eMail info@metav-werkzeuge.com, Tel +49 2822 7131930, WhatsApp +49 170 2837271 Technical data SKU: VCP-2 GTIN: 4061905085673 Manufacturer: Vertex Facts Dimensions: 49.5 x 58 x 45.5 mm Weight: 1.2 kg Pieces per set: 2 Special features Product name: Lamella blocks and prisms Product type: Lamella block Category: Vertex FAQ Are these blocks suitable for small workpieces and delicate fixturing? The VCP-2 lamella blocks and prisms are designed for secure clamping of small components and perform well in fixtures where minimised footprint and controlled contact pressure are required. How does the lamella design affect repeatability? The lamella principle ensures even distribution of contact forces; the matched two-piece set helps to maintain consistent positioning and repeatability across repeated setups. What are the exact dimensions and weight of the set? The set measures 49.5 x 58 x 45.5 mm and has a combined weight of 1.2 kg, making it suitable for compact fixtures. Can the set be integrated into inspection setups as well as machining fixtures? Yes, the VCP-2 configuration is suitable for both machining and inspection applications, offering stable support without occupying excessive space in the inspection jig. Is the VCP-2 supplied ready to use as a matched pair? The product is supplied as a two-piece set intended for paired operation, reducing the need for individual matching during assembly. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
2,000 N Closure Clamp Horizontal Base With Hook, Zinc-Plated - Kukamet
Take advantage of a compact, corrosion-resistant clamp that combines dependable holding performance with straightforward mounting for fast fixture cycles; order the clamp directly via Metav Werkzeuge or consult the technical advisors if clarification is required. 411 latch clamp – horizontal-foot mounting, zinc-plated (Kukamet) 411 latch clamp constructed for secure fastening in jigs and fixtures with a horizontal-foot base and integrated hook for rapid engagement Horizontal-foot mounting for stable attachment Zinc-plated corrosion-resistant finish 2,500 N maximum holding force Built-in hook for quick engagement Secure clamping that keeps production moving The 411 latch clamp delivers a reliable holding force of up to 2,500 N, ensuring consistent workpiece retention during machining, assembly or inspection tasks. The stated holding value describes the maximum static retention the clamp provides once engaged; this results in fewer re-clamps, fewer interruptions and improved throughput in repetitive operations. For applications requiring a defined pressing action, the device also provides a separate maximum pressing force of 2,000 N, differentiating the functions of securing and compressing components during setup. Robust finish for workshop environments A zinc-plated surface treatment protects the clamp against corrosion and typical workshop wear, extending service life in demanding conditions. The light construction — approximately 0.325 kg — reduces added mass on fixtures while preserving durability, making the clamp suitable for both hand-operated jigs and automated stations where low inertia is beneficial. The integrated hook accelerates engagement and disengagement, reducing cycle time and enhancing operator ergonomics during repetitive fastening tasks. Fast, adaptable installation and adjustment Fitted with a horizontal foot for base mounting, the clamp is compatible with standard bench and fixture plate arrangements and allows for easy alignment in the workholding setup. The thread length 41 mm provides scope for fine positional adjustment and secure anchoring in varying plate thicknesses. Where repeatable positioning is required, the clamp’s design supports straightforward integration into existing tooling, reducing downtime during changeovers and simplifying fixture design. Practical choice for workshop and light industrial use Designed as a pragmatic component for clamping systems, the latch clamp supports a broad range of routine applications such as assembly, packaging and inspection. The combination of a compact footprint, corrosion-resistant finish and defined mechanical ratings yields a dependable solution that contributes to consistent process quality. The product’s straightforward mechanics minimise maintenance needs and make it accessible for users with varied levels of technical expertise. For purchase enquiries or specific application advice regarding the Kukamet 411 latch clamp and its 2,500 N holding capability, contact Metav Werkzeuge in Emmerich by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data SKU: 411-3 GTIN: 8680731502534 ECLASS: 21041718 ETIM: EC011973 Core specifications Maximum pressing force: 2,000 N Maximum holding force: 2,500 N Thread length: 41 mm Weight: 0.325 kg Special features Zinc-plated material Horizontal-foot mounting With hook for quick engagement Category: Spanner / Clamp FAQ What maximum holding force does this clamp provide? The clamp offers a maximum holding force of 2,500 N, which is the peak static retention capacity of the Kukamet 411 latch clamp (SKU 411-3). Is the clamp suitable for harsh or humid workshop conditions? Yes, the zinc-plated finish on the 411 latch clamp improves corrosion resistance for standard workshop environments. How is the clamp mounted to a fixture plate? The clamp is fitted for horizontal-foot mounting; the foot provides a stable base and the thread length of 41 mm allows secure fastening into a fixture plate. Can the clamp be used for both pressing and holding functions? The device specifies a pressing capacity of 2,000 N and a separate holding capacity of 2,500 N, enabling both clamping and compressive actions in typical jigs. What is the approximate weight of the clamp and does it affect fixture balance? The clamp weighs around 0.325 kg, a low mass that minimises added inertia while maintaining robustness for regular workshop use. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
2-3/4" Collet Chuck VCL-3C, 163x91mm Body, 50.8mm Jaw Depth - Vertex
Take advantage of the combination of precise clamping, compact design and easy handling to maintain steady production and reliable setups. Order the VCL-3C directly via Metav Werkzeuge or consult our advisors for application advice and supply assurance. VCL-3C collet — 2‑3/4″ opening, compact format (Vertex) The VCL-3C collet provides secure, repeatable clamping for routine machining and workshop tasks, suited to general-purpose toolholding and short-run production. Universal 2‑3/4″ opening for versatile clamping Compact 163 x 91 mm footprint for tight spaces Lightweight 0.38 kg for easy handling and changeover 50.8 mm jaw depth for stable workpiece support Consistent grip for repeatable results The VCL-3C was engineered to deliver consistent clamping force and stable centring, reducing setup variance and improving part run-out. With a clearly defined 2‑3/4″ opening, the sleeve secures cylindrical workpieces and tooling in a predictable way, which supports tighter tolerances across repeated cycles. Using a reliable collet reduces the need for corrective machining and helps maintain steady throughput, an advantage for both maintenance work and small-batch production. Compact design that eases workshop logistics Measuring 163 x 91 mm and weighing just 0.38 kg, this collet occupies minimal space in the tool cabinet and lightens handling during tool changes. The 50.8 mm jaw depth provides adequate engagement for short to medium-length workpieces while keeping the overall assembly compact. The reduced mass lowers inertia during handling, speeding up changeovers and simplifying storage, so operators can focus on machining rather than equipment management. Built for integration into standard toolholding routines Designed as a practical component for everyday clamping tasks, the collet supports consistent workflows and straightforward inventory control. The clear SKU and traceability data make stock management easier, and the straightforward geometry allows rapid visual checks before use. Together with a trusted supplier network, this component helps sustain a dependable supply chain and reduces the risk of downtime caused by unclear specifications. Contact Metav Werkzeuge to reserve the VCL-3C collet for dependable clamping and request expert guidance on integrating it into existing toolholding systems Technical data SKU: VCL-3C GTIN: 4061905088544 Brand: Vertex Facts Dimensions: 163 x 91 mm Weight: 0.38 kg Opening: 2-3/4″ Jaw depth: 50.8 mm eClass: 21041712 Special features Designation: collet (Spannzange) Gallery image available Suitable for general workshop clamping tasks FAQ What workpiece diameters does the VCL-3C accommodate? The VCL-3C collet features a 2‑3/4″ opening, which defines the primary clamping range; check the specific tolerance band of the toolholder system to confirm exact diameters. Is the VCL-3C suitable for repetitive production runs? Yes, the VCL-3C from Vertex is intended for repeatable clamping tasks and supports consistent set-ups in short to medium production runs. How compact is the VCL-3C for storage and handling? With overall dimensions of 163 x 91 mm and a weight of 0.38 kg, the VCL-3C is compact and easy to handle for rapid tool changes and small storage spaces. Can the collet be identified for stock management? The VCL-3C is traceable via its SKU (VCL-3C) and GTIN (4061905088544), facilitating inventory control and procurement processes. Who manufactures the VCL-3C? The VCL-3C is manufactured by Vertex and supplied with clear identification to support reliable sourcing. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
Secure components with reliable workpiece clamps
Workpiece clamps, also known as workholding clamps or workholding devices, form the essential mechanical interface between machine and part in industrial fabrication. They keep components absolutely play-free, positionally accurate and vibration-resistant during milling, turning, drilling or grinding.
How workpiece clamps ensure process stability
A correctly specified clamping concept transfers the high cutting and feed forces of modern CNC machines into the machine table or spindle without deforming the part. The right combination of mechanical, hydraulic, pneumatic or magnetic solutions enables fast, repeatable setups and supports automated part change where required. Typical applications range from single-part turning to high-volume series milling and complex five-axis machining.
Concrete production benefits at a glance
- repeatable positioning: reduces scrap and rework
- high clamping forces: withstands aggressive cutting without part movement
- reduced set-up time: modular systems and quick-change features speed throughput
- improved surface finish: vibration damping for finer results and tighter tolerances
- flexible compatibility: vices, chucks, clamping plates and zero-point systems for diverse geometries
Why Metav's range is the practical choice
Metav combines decades of specialist know-how with a broad, handpicked range that democratises precision for workshops and industry alike. Based in Emmerich, Metav acts as a quality filter for the European market and supplies more than 250,000 products from precision metrology to complete workshop equipment. With the trust of over 48,000 customers, Metav offers a single-source approach that reduces supplier complexity and secures dependable delivery to your workbench.
Technical data
- function: mechanical interface between machine and workpiece
- primary requirements: absolute positional accuracy; vibration reduction; high clamping forces
- technologies: mechanical, hydraulic, pneumatic, magnetic
- typical components: machine vices; chucks; clamping plates; zero-point systems; pratzen; clamping jaws
- application areas: milling; turning; drilling; grinding; automated part change systems
- production benefits: reduced set-up time; enhanced process security; optimised series and single-part production
The practical summary
Workpiece clamps bring the stability and repeatability required to meet tight tolerances and excellent surface quality, making them indispensable across machining operations. Choosing the right workholding clamps and modular workholding devices is a decisive step towards higher productivity and consistent part quality.
FAQ
What types of workpiece clamps are suitable for automated machining?
Workholding clamps with quick-change modules, hydraulic actuation or magnetic systems are commonly used for automated machining. These workholding devices enable fast, repeatable part changes and integrate with zero-point systems.
How do workpiece clamps affect surface finish and tolerances?
A stable clamping concept minimises vibration and part movement; this improves surface finish and supports achieving narrow tolerances when using high-precision workpiece clamps or workholding devices.
Can the same workpiece clamps handle different part geometries?
Modular workholding clamps and adaptable clamping jaws allow flexible fixturing for varied geometries; combining vices, clamping plates and pratzen increases versatility on the shopfloor.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com