Secure and precise workholding for metalworking productivity
Workholding devices such as workpiece clamps and chuck systems provide absolute positional stability and vibration damping during milling, turning, drilling and grinding, ensuring parts remain free of play under high CNC cutting and feed forces. By transferring clamping loads into the machine table or spindle without deforming the component, a well engineered workholding solution improves machining accuracy, surface finish and process reliability while reducing set-up times. Modular systems from machine vices and chucks to zero-point systems and specialised fixtures enable fast changeovers and support both serial and single-part production, delivering consistent clamping force, repeatability and enhanced throughput.
2-Piece Lamella Block And Prism Set, Clamp Inserts - Vertex
Benefit from modular clamping, reliable repeatability and a compact two-piece design — order the lamella block and prism set (VCP-4) directly via Metav Werkzeuge or consult our specialists if needed. Lamella blocks and prisms — modular two-piece clamping set (VCP-4) by Vertex The lamella blocks and prisms set provides secure modular clamping for cylindrical and irregular shafts in machining, inspection and assembly tasks. Modular clamping system Suitable for cylindrical workpieces Compact two-piece set Faster, repeatable clamping for productive workflows The lamella principle delivers modular clamping that adapts to uneven or round surfaces, converting axial tightening into a uniform radial grip. This behaviour reduces orientation errors and shortens setup times, which improves repeatability across batches. For production runs and quality checks where consistent positioning matters, the two-piece configuration offers quick alignment and stable support, contributing to measurable process reliability. Easy integration into existing fixtures and benches Designed as a compact workholding solution, the block set fits common bench vises and fixture plates without extensive modification. The two-piece set format simplifies storage and transport while providing flexible placement options within a clamping arrangement. Clear mechanical behaviour and straightforward geometry enable rapid planning of clamping force and contact points, so process engineers can align the solution with existing machining or measuring sequences. Durable design that supports industrial use Manufactured under the Vertex range, the clamping solution is built for routine workshop use and repetitive handling. The construction emphasises long-term stability and low upkeep, which minimises downtime and helps maintain measurement integrity in inspection tasks. In environments where consistent contact and support are required, the compact mass of the set contributes to controlled handling without excess bulk, assisting safe, efficient workholding over time. Contact Metav Werkzeuge in Emmerich for tailored advice on the Vertex lamella block and prism set VCP-4 — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: VCP-4 GTIN: 4061905096396 ECLASS: 21020803 Facts Weight: 2.5 kg Pieces per set: 2 Set: Yes Special features Designation: Lamella blocks and prisms Type: Lamella block Brand: Vertex Image asset: vcp-0-main.jpg FAQ What materials are suitable for clamping with this set? The lamella block and prism set (Vertex VCP-4) is designed for gripping cylindrical and irregular components commonly found in metalworking and inspection tasks; specific machining material limits depend on the overall fixturing and tooling strategy. How many pieces are included in the delivery? Delivery comprises a two-piece set as indicated for the VCP-4, which allows immediate use as paired supports for shafts and uneven workpieces. Can the set be used with standard bench vises and fixture plates? Yes, the design of the lamella blocks and prisms enables straightforward integration into standard vises and fixture plates without specialised adapters, simplifying retrofit into existing workflows. What handling considerations apply given the weight? At 2.5 kg for the set, the VCP-4 offers a balance of mass for stable support while remaining manageable for manual repositioning and storage. Is the product suitable for repeated industrial use? The Vertex lamella block set VCP-4 is intended for routine workshop and production use, offering durable clamping behaviour that supports consistent process results. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
2.25x Fluorescent Magnifying Task Lamp Halogen, IP 20, 1.8m Cable - Vertex
Data inconsistency: the product is described as "fluorescent" but the light source is specified as "Halogen". This discrepancy may lead to confusion for customers and could impact their purchasing decisions. Fluorescent and halogen lighting technologies differ significantly in terms of energy efficiency, lifespan, and brightness levels. It is essential to ensure that the product description aligns accurately with the specified light source to maintain clarity and trust. Please review and correct the product data to reflect the correct lighting technology. Accurate product information is crucial for customer satisfaction and helps avoid potential misunderstandings or complaints regarding product specifications.
2.25x Fluorescent Magnifying Work Lamp LED, IP20, 110/220V Cable 1.8m - Vertex
Benefit from precise inspection lighting thanks to bright LED illumination and a 2.25× magnifier (5 dioptres); the stable base and dual-voltage operation support consistent workflow — order the VHL-30TLED directly via Metav Werkzeuge or consult our advisers if needed. VHL-30TLED work lamp with integrated magnifier and LED illumination by Vertex The VHL-30TLED is a work lamp with integrated magnification designed for close visual inspection, assembly and quality-control tasks in workshops and laboratories. Integrated LED illumination 2.25× magnifier (5 dioptres) Dual-voltage 110/220 V compatibility Stable 292 mm base, 1.8 m cable Illuminate fine detail with reliable magnification The VHL-30TLED combines a high-clarity lens with 2.25× magnification (equivalent to 5 dioptres) to make small features visibly distinct and measurable. A magnifier of this strength reduces the need for awkward viewing angles and supports repeated visual checks, which improves consistency in inspection and assembly. The optical specification is suited for tasks where small tolerances must be verified visually, and the magnification is balanced to keep the field of view practical for industrial use. Stable setup for repeatable inspection A 292 mm base and a weight of 3.5 kg provide a firm, vibration-resistant platform that keeps the lamp in place during precise operations. The included 1.8 m cable and dual-voltage option (110 V or 220 V) enable quick integration into different workstations and international settings without additional adapters. Together, these characteristics promote a steady working environment and reduce interruptions, making inspection cycles more efficient. Optical design that reduces eye fatigue and improves contrast The lamp uses LED illumination to deliver consistent light output with low heat generation, reducing glare and thermal load at the workpiece. Consistent illumination improves contrast on fine edges and surface defects, supporting faster visual decisions and fewer re-measurements. The optical setup is intended to lower operator fatigue during prolonged inspection sessions while maintaining sufficient illumination to reveal subtle features. Ready for workshop use and flexible installation With an IP20 protection rating the lamp is intended for controlled indoor environments typical of benches and inspection tables. The unit’s compact footprint and included cable allow straightforward placement where concentrated lighting is required. For bespoke workplace arrangements, Metav provides advice on effective positioning and mounting alternatives so that the lighting contributes directly to process reliability and operator comfort. Contact Metav Werkzeuge in Emmerich for tailored advice on the Vertex VHL-30TLED and to confirm suitability for specific inspection tasks — phone, email and WhatsApp contact options are available from the dealer Technical Data Article number: VHL-30TLED GTIN: 4061905091117 Manufacturer: Vertex Machinery Works Co., Ltd. Facts Weight: 3.5 kg Base length: 292 mm Magnification: 2.25× (5 dioptres) Cable length: 1.8 m Voltage: 110 V or 220 V Protection class: IP 20 Special features LED illumination Integrated magnifier lens Stable base for bench use Included power cable FAQ What level of magnification does the VHL-30TLED provide? The VHL-30TLED offers a 2.25× magnification, corresponding to 5 dioptres, which is suitable for close visual inspection and precision assembly tasks. Is the lamp suitable for international use with different mains voltages? Yes, the lamp is supplied for 110 V or 220 V operation, allowing use in different regions without modification. Can the VHL-30TLED be used in production environments with exposure to dust or coolant? The VHL-30TLED has an IP20 rating, which is suitable for indoor workbenches and controlled environments but not for areas with high dust or liquid exposure. What illumination technology does the lamp use and what are the benefits? The lamp uses LED illumination, offering consistent light output, low heat at the work area and improved contrast for defect detection. What is included with delivery of the VHL-30TLED? Delivery includes the lamp and an 1.8 m cable for immediate integration at the workstation. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
2.25x Fluorescent Work Lamp LED, 480x400mm Arm, IP20, 110/220V, 5 Dioptre, Cable 1.8m - Vertex
Conflicting product information: the light source is listed as both fluorescent and LED — please provide corrected specifications. This discrepancy makes it unclear which type of light source is actually used in the product, and it is important to have accurate details for proper evaluation and decision-making. Ensuring clarity in product specifications helps customers make informed choices and prevents potential misunderstandings. Could you confirm whether the light source is fluorescent, LED, or perhaps a combination of both? Providing precise and updated information will greatly assist in resolving this issue and improving the overall reliability of the product description.
2.25x Fluorescent Work Lamp With Halogen Light, 250x270mm Arm, IP20, 1.8m Cable - Vertex
Taking advantage of the combination of bright halogen illumination, an integrated 2.25x (5 dioptre) magnifier and flexible 110V/220V operation ensures fast, reliable visual inspection and fewer rechecks on precision tasks. Order the VHL-30MEB directly via Metav Werkzeuge or ask our consultants if needed. VHL-30MEB Work Lamp – halogen light with 2.25x magnifier (Vertex) The VHL-30MEB is a robust work lamp designed for close visual inspection in workshop environments, combining a high-contrast halogen light source with an integrated magnifying lens for accurate component checks. Halogen light for clear contrast Integrated 2.25x magnifier lens Switchable 110V/220V operation 1.8 m cable included Precise illumination that speeds up inspection The lamp’s halogen light delivers a stable, high-contrast beam that makes surface defects and fine features easier to spot, reducing inspection time and rework. Halogen bulbs offer consistent colour rendering, which is important when distinguishing subtle shades or marks on metal and plastics; this creates a reliable visual basis for decision-making on the shop floor. With its focused beam and steady output, the device supports sustained use without frequent repositioning, contributing to a more efficient workflow and fewer interruptions during quality checks. Enlarged view with minimal eye strain An integrated 2.25x (5 dioptre) magnifier provides a larger, clearer view of small details while keeping hands free for measurement or adjustment. The optical choice balances magnification and field of view so that critical edges and markings remain visible without excessive distortion. For users performing repeated visual checks, the magnifier reduces eye strain and shortens the time needed to verify parts, which translates into measurable gains in throughput for inspection and assembly tasks. Flexible installation and workshop compatibility Designed for indoor workstations, the lamp offers 110V/220V operation to match regional power supplies and includes a 1.8 m cable for straightforward positioning on benches. The articulated arm (250 x 270 mm) provides a practical reach and stable alignment for typical inspection angles, while the unit’s weight of 2.9 kg ensures it remains steady during use. The protection class IP20 indicates suitability for dry, indoor environments such as machine shops and inspection benches; it is not intended for wet or outdoor applications. Together, these attributes make integration into existing workshop layouts uncomplicated and predictable. Contact Metav Werkzeuge in Emmerich for tailored advice on integrating the Vertex VHL-30MEB into your inspection setup or to request a detailed specification sheet from Metav Werkzeuge. Technical data Article number: VHL-30MEB GTIN: 4061905090271 Manufacturer: Vertex Facts Weight: 2.9 kg Magnification: 2.25x Dioptre: 5 Arm dimensions: 250 x 270 mm Cable length: 1.8 m Voltage: 110V or 220V Protection rating: IP 20 Special features Light source: Halogen Accessory included: Cable 1.8 m FAQ What level of magnification does the lamp provide? The lamp provides 2.25x magnification (5 dioptre), allowing enlarged viewing of small details without excessive distortion. Can the lamp be used with different mains voltages? Yes, the VHL-30MEB supports 110V or 220V operation to suit regional power supplies. Is the lamp suitable for wet or outdoor use? No, the unit is rated IP20, which is intended for dry, indoor workshop environments and not for exposure to water. What type of light source is fitted and why is it beneficial? A halogen bulb is fitted; it provides steady illumination with good colour rendering, which helps when assessing surface finish and fine defects. What is included in the delivery? The delivery includes the lamp with an 1.8 m cable for immediate installation and positioning. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
2.25x Fluorescent Work Lamp With LED Light, 1.8m Cable, IP20 - Vertex
Take advantage of reliable LED illumination and a precision magnifier to speed up inspection tasks while maintaining consistent results; the articulated arm and robust balance support stable positioning across frequent use. Order the unit directly via Metav Werkzeuge or consult our specialists for configuration and delivery. VHL-30MLED Work Lamp — LED illumination with integrated 2.25× magnifier by Vertex The VHL-30MLED is a LED work lamp with an integrated magnifier and an articulated arm, designed for close visual inspection and detailed assembly tasks in industrial and laboratory environments. LED illumination for consistent colour rendering 2.25× magnification with 5 diopter lens Articulated arm 250 × 270 mm for precise positioning Supplied with 1.8 m cable; 110 V or 220 V operation Brighter inspection with low-heat LED lighting The LED light source delivers steady, high-contrast illumination that improves defect detection while producing minimal heat. Consistent colour rendering from the lamp reduces the need for repeated checks and supports faster decision-making on the shop floor. Energy-efficient operation also reduces running costs compared with conventional lamps, and the solid-state light source offers long service life for continuous use in production or quality-control stations. Flexible positioning that saves handling time An articulated arm measuring 250 × 270 mm enables accurate placement of the lamp head over components and tools, reducing repositioning during repetitive tasks. The unit’s balanced construction and 2.9 kg mass provide stable support without drift, which helps maintain focus and reduces operator fatigue during extended inspections. Improved ergonomics and rapid alignment increase throughput by shortening setup times for detail work. Integrated magnification for precise visual control The combination of 2.25× magnification and a 5 diopter lens offers a clear close-up view for inspection, soldering, or assembly operations where small features must be verified. Diopter rating indicates the lens strength for near work and assists in selecting the correct focal distance for detailed tasks. The lamp is supplied with a 1.8 m cable and supports 110 V or 220 V operation, while IP20 protection denotes suitability for indoor workshop and bench environments where splash protection is not required. For reliable inspection lighting and consistent visual results, choose the Vertex VHL-30MLED from Metav Werkzeuge — contact Metav Werkzeuge for tailored advice and fast supply from Emmerich at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: VHL-30MLED GTIN: 4061905092084 Manufacturer: Vertex Facts Weight: 2.9 kg Arm: 250 × 270 mm Magnification: 2.25× Diopter: 5 Cable length: 1.8 m Voltage: 110 V or 220 V Protection class: IP20 Special features LED light source Integrated magnifier lens Articulated positioning arm Supplied cable included Indoor use, bench or workstation FAQ What level of magnification does the lamp provide? The lamp offers 2.25× magnification with a 5 diopter lens, which provides clear close-up viewing for inspection and fine assembly work. Can the unit be used on a workbench with frequent repositioning? Yes, the articulated arm (250 × 270 mm) and 2.9 kg construction ensure stable positioning and easy realignment for repetitive bench tasks. Is the lamp suitable for outdoor or wet environments? The unit is rated IP20, indicating it is intended for indoor use at workshop benches and is not protected against water ingress. Which voltages are supported by the lamp? The lamp supports 110 V or 220 V operation and is supplied with a 1.8 m cable for standard mains connections. Is the light source replaceable or serviceable? The lamp uses an integrated LED light source designed for long operational life; specific service or replacement details are available from the manufacturer. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
2.5 kN Push Rod Clamp 513, Black Oxide Finish, 0.36 kg, M8x50 Spindle – Kukamet
Benefit from a compact, high‑force clamp with a corrosion‑resistant blackened finish and an adjustable M8×50 pressure spindle for secure, space‑saving fixtures; order the push‑rod clamp directly via Metav Werkzeuge or consult our specialists for application advice. B513-3 Kukamet push‑rod clamp — 2,640 N holding force, M8×50 spindle The B513-3 push‑rod clamp is a compact clamping element for workshop and light industrial fixturing, developed to provide reliable workpiece retention where a low profile and adjustable pressure are required. 2,640 N maximum holding force Blackened, corrosion-resistant finish M8×50 adjustable pressure spindle Lightweight — 0.36 kg compact design Secure clamping performance for repetitive fixtures The clamp delivers a holding force of 2,640 N and a maximum pressure capacity of 2,500 N, values that translate into consistently secure retention for a range of small to medium components. These numerical indicators describe the mechanical limits: the holding force specifies the lateral retention capacity under load, while the pressure force refers to the axial contact pressure exerted by the spindle. For jigs and fixtures where repeatability matters, this combination reduces rework and cycle interruptions and supports stable machining and assembly routines. Robust finish and easy adjustment for long service life The body is treated with a blackened finish, providing improved corrosion resistance and reduced surface glare in workshop environments. The M8×50 pressure spindle enables fine adjustment of contact pressure and compensates for workpiece variation without additional tools. The absence of a mounting foot (delivered without base) allows direct integration into existing fixture plates or welded brackets, supporting compact layouts and reducing interference with adjacent components. Compact, lightweight design that simplifies integration With a mass of 0.36 kg, the clamp is notably lightweight, favouring applications where low inertia is beneficial and where multiple clamps are used across a fixture. The compact profile makes the component suitable for confined spaces or stacked assemblies. Designed as a basic mechanical clamping element within the clamping technology portfolio, the unit functions as a reliable, low‑maintenance option for production jigs and manual workstations, supporting efficient workflow and predictable results. For robust, space‑saving clamping choose the Kukamet B513-3 push‑rod clamp — contact Metav Werkzeuge for specification advice and dependable delivery from Emmerich. Technical data SKU: B513-3 GTIN: 8680731508758 Model: 513 Category: Spanner Manufacturer: Kukamet Facts Weight: 0.36 kg Maximum holding force: 2,640 N Maximum pressure force: 2,500 N Pressure spindle: M8×50 eCl@ss: 21041716 ETIM: EC011973 Special features Material/finish: blackened (black oxide) Delivered without base Compact, lightweight construction Suitable for workshop and light industrial fixtures FAQ What workpieces is this clamp suitable for? The B513-3 push‑rod clamp from Kukamet is intended for small to medium workpieces in jigs and fixtures where a compact, repeatable clamping action is required. How is the contact pressure adjusted? Adjustment is performed via the M8×50 pressure spindle, which allows fine control of the axial contact pressure to suit varying workpiece heights. Can the clamp be mounted to a fixture plate? Yes; the unit is supplied without base, enabling direct integration into fixture plates or custom brackets for space‑saving installation. What does the blackened finish provide? The blackened finish offers enhanced corrosion resistance and reduced surface reflection, extending service life in typical workshop environments. What are the key performance figures to check for fixture design? Designers should consider the 2,640 N holding force and 2,500 N pressure capacity as the primary mechanical values when selecting the clamp for specific applications. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
2.5mm ER11 Collet 18mm Length 5 µm Runout, Nomin. Minus 0.5mm Clamping Range - TECWERK
Take advantage of precise clamping, DIN-compliant manufacture and compact length for consistent tool performance across jobs; the collet secures tools along their full clamping length and tolerates chamfer-mounted bits while maintaining a 5 µm runout. Order the collet directly via Metav Werkzeuge or ask our consultants if needed. Collet Type ER 11/4008 E — ER 11 collet with 2.5 mm clamping diameter, TECWERK Collet Type ER 11/4008 E is a compact ER 11 clamping sleeve designed for general workshop and light industrial use, offering reliable concentricity and compatibility with standard ER collet chucks for milling and drilling operations. Compliant with DIN 6499-B Fits ER collet chucks type ER Runout and repeatability 5 µm Clamping diameter: nominal −0.5 mm Accurate clamping for consistent machining results The compact collet delivers reliable concentricity by holding tools along the entire clamping length, which reduces vibration and improves surface finish. The specified runout and repeatability of 5 µm provides a measurable advantage when repeatable hole positions or precise milling paths are required. Because the clamping sleeve permits seating on the lead chamfer, short shank tools and countersunk bits can be secured without special adapters, improving process reliability in short-cycle production and prototyping. Seamless compatibility with ER systems and quick tool changes Designed to meet DIN 6499-B, the sleeve integrates with standard ER collet chucks, eliminating the need for intermediate sizes and simplifying inventory management. The nominal-to-clamped compensation of −0.5 mm allows predictable clamping behaviour for a 2.5 mm nominal diameter, while the small overall length (L: 18 mm) and outer diameter (11.5 mm) keep the assembly compact. This compatibility reduces setup time and supports efficient tool changes in a busy workshop environment. Practical benefits for workshop and maintenance applications Made to suit everyday machining tasks, the collet balances compactness with grip performance to improve operator confidence during repetitive operations. The small clamping diameter (2.5 mm) is ideal for fine drilling, small-end milling and finishing passes, where tool runout directly affects part quality. Clear technical conformity and predictable performance contribute to process optimisation, especially when combined with Metav Werkzeuge’s product range and logistical support from Emmerich. Contact Metav Werkzeuge for tailored clamping advice and availability — eMail: info@metav-werkzeuge.com · Tel: +49 2822 7131930 Technical Data Article number: 2000832851NW SKU: 2000832851NW Product type: ER 11 collet Brand: TECWERK Packaging unit: 1 Numbers / Core technical data Clamping diameter nominal: 2.5 mm Outer diameter D: 11.5 mm Length L: 18 mm Runout / repeatability: 5 µm Clamping diameter compensation: nominal −0.5 mm Special features / Versions Compliant with DIN 6499-B Suitable for ER collet chucks type ER Tools held along full clamping length Can be clamped on the lead chamfer No intermediate sizes required FAQ What materials and tool types can be clamped with this collet? The Collet Type ER 11/4008 E from TECWERK is intended for typical small-diameter tools such as drills and end mills; material-specific suitability depends on the tool material rather than the collet itself. How precise is the clamping accuracy of the ER 11/4008 E? The collet provides a runout and repeatability of 5 µm, ensuring consistent concentricity for fine machining tasks when used with a compatible ER collet chuck. Can short-shank tools be secured with this collet? Yes, the design allows tools to be clamped along the full clamping length and it is possible to clamp on the lead chamfer, which helps secure shorter tool shanks without additional adapters. Is the ER 11/4008 E compatible with standard ER chucks? The collet is manufactured to comply with DIN 6499-B and is compatible with standard ER collet chucks of the corresponding size. What is the clamping range and compensation for the 2.5 mm nominal size? For the nominal 2.5 mm clamping diameter, the clamping diameter compensation is nominal −0.5 mm, providing predictable clamping behaviour. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
2.8mm x 2.1mm Quick-Change Insert SE for DIN 371/374/376, L3 4mm L4 21.5mm - TECWERK
The combination of a compact 2.8 mm cutting interface, a robust 2.1 mm shaft square and direct torque transmission ensures fast tool changes and reliable tapping performance in small-thread applications; order the insert directly via Metav Werkzeuge or ask their consultants for compatibility advice. Quick-change insert SE 2.8 mm x 2.1 mm (Size 1) — TECWERK quick-clamp insert for DIN taps The Quick-change insert SE 2.8 mm x 2.1 mm is a size 1 insert designed to hold thread taps in quick-clamping adaptors, suitable for standard small-thread sizes specified in DIN 371 and DIN 374/376. Quick-change design for fast tool swaps Torque transmitted via shaft square 2.1 mm Compatible with DIN 371 M2–2.5 and DIN 374/376 M4 Compact size 2.8 mm diameter, L4 21.5 mm Precision and compatibility for small-thread tapping This quick-clamping insert delivers a compact solution for precise tapping tasks in restricted spaces. Built for compatibility with common small-thread standards, the insert matches taps to the DIN 371 M2–2.5 and DIN 374/376 M4 families, which makes it suitable for detailed assembly and repair work. The compact 2.8 mm diameter and the defined dimensions (notably L4 21.5 mm) ensure consistent axial positioning in the clamping adaptor, reducing misalignment and minimising the risk of tap breakage. The result is measurable time savings in changeovers and fewer rejects in repetitive production sequences. Engineered for direct torque transmission and reliable holding Constructed for direct power transfer, the insert transfers torque through the 2.1 mm shaft square, avoiding intermediate coupling losses. The design intentionally excludes a safety clutch (without safety clutch), which maintains a rigid connection between tool and holder for applications where slip would negatively affect thread quality. The taps themselves are secured in the insert by the quick‑clamping mechanism, so the operational principle is simple: secure the tap, engage the quick clamp and transmit torque through the square shank. This clear mechanical chain supports repeatable torque delivery and predictable performance in precision tapping operations. Workshop workflow advantages and supply reassurance Using standardised quick-change inserts simplifies inventory and tool management: different shank sizes simply require the corresponding insert type, allowing workshops to cover a range of tap shank formats without bespoke adaptors. The compact geometry of the unit reduces handling time during threading operations and lends itself to automated sequences where rapid exchange is essential. Metav’s role as a precision partner strengthens this workflow: central supply from Emmerich and a broad product range minimise procurement complexity while offering access to technical guidance when integrating the insert into existing quick-clamp systems. Discuss technical fitment and secure supply through Metav Werkzeuge for TECWERK quick-change inserts dispatched directly from Emmerich. Technical data Article number: 4000832633NW Product type: Quick-change insert SE Brand: TECWERK Type: Size 1 Suitable for: DIN 371 M2–2.5; DIN 374/376 M4 Packaging unit: 1 Core dimensions Diameter: 2.8 mm Shaft square: 2.1 mm L1: 18.5 mm L3: 4 mm L4: 21.5 mm L5: 7 mm D: 30 mm D1: 19 mm Special features Without safety clutch Inserts hold taps via quick-clamping device Torque transmission via shaft square Different shank sizes require corresponding inserts FAQ How does this insert secure thread taps in the quick-clamping system? The Quick-change insert SE 2.8 mm x 2.1 mm secures taps by the quick-clamping device; the tap shank is clamped inside the insert and torque is transmitted via the 2.1 mm shaft square. Which tap sizes are compatible with this insert? Compatibility is specified for DIN 371 M2–2.5 and DIN 374/376 M4, meaning the insert is intended for the small-thread tap sizes covered by those DIN designations. Is there a safety clutch included with the insert? The design is specified without safety clutch, providing a rigid connection for applications where consistent torque transfer and minimal slip are required. What are the key dimensions to check when selecting a matching insert? Important dimensions include the 2.8 mm diameter, the 2.1 mm shaft square and the axial measures such as L4 21.5 mm; refer to SKU 4000832633NW for exact sizing. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
20 mm Step Clamp M20/M18 Bolt Mount, 38x150x25mm - Vertex
Take advantage of the compact 38 x 150 x 25 mm footprint together with compatibility for 20 mm T‑slot systems and both M18 and M20 clamping bolts to streamline fixturing workflows. Order the clamp directly via Metav Werkzeuge or request tailored advice from our consultants for seamless integration. Step Clamp by Vertex — compatible with 20 mm T‑slot and M18/M20 bolts A Step Clamp designed for secure, space‑efficient workpiece clamping on standard milling and machining tables. Compact 38 x 150 x 25 mm footprint Designed for 20 mm T‑slot systems Accepts M18 and M20 clamping bolts Faster set‑ups through standard compatibility The 20 mm T‑slot compatibility and support for both M18 and M20 bolt sizes make this clamp a pragmatic choice for mixed‑tooling environments. Matching common machine table standards reduces adapter needs and minimises set‑up time, allowing quicker transition between jobs. For operators who value predictable fixturing, the standardised interfaces provide a clear technical basis for planning clamping points and torque settings. Compact design that frees table space With external dimensions of 38 x 150 x 25 mm and a net weight of 0.73 kg, the clamp offers a small footprint without sacrificing handling convenience. Its reduced profile helps to keep the machining area clear, enabling closer proximity of multiple clamps and improved access for cutting tools. The manageable weight makes manual positioning straightforward while maintaining the mass required for stable, repeatable clamping. Practical geometry for versatile workshop use A step‑style clamp provides height flexibility commonly required when bedding fixturing stacks or compensating for uneven workpiece surfaces. Sourced from Vertex, the component integrates with standard clamping bolt workflows and supports quick visual checks during set‑up. Clear compatibility with T‑slot tables and threaded clamping bolts ensures predictable behaviour under torque, aiding process reliability and repeatability across production batches. Contact Metav Werkzeuge in Emmerich for availability, specification support and delivery options — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6326 GTIN: 4061905093678 ECLASS: 21170107 Dimensions: 38 x 150 x 25 mm Weight: 0.73 kg T‑slot size: 20 mm Bolt options: M18 or M20 Brand: Vertex Product type: Step clamp Suitable for standard milling/fixture tables Compact profile for multi‑point clamping FAQ What table systems is this clamp compatible with? The clamp is designed for 20 mm T‑slot systems and fits standard machine tables that accept that slot width. Which bolt sizes can be used with this clamp? The clamp accepts M18 and M20 clamping bolts, providing flexibility in bolt choice and torque capacity. Is the clamp suitable for multi‑point fixturing on smaller tables? Yes, the compact 38 x 150 x 25 mm footprint and 0.73 kg weight make it suitable for tight layouts and multiple clamps on the same table. Who manufactures this clamp and how is it identified? This clamp is produced by Vertex and is listed under SKU 6326 (GTIN 4061905093678). Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
20 mm Step Clamp M20/M18 Bolt, 44x200x28mm - Vertex
Take advantage of compact dimensions and universal bolt compatibility for fast, repeatable workholding — the clamp’s fit for 20 mm T‑slots and support for M20/M18 fasteners ensures reliable fixation in diverse machining setups. Order the unit directly via Metav Werkzeuge or consult our specialists for application advice. Step Clamp – Compact clamp for 20 mm T‑slots, compatible with M20/M18 bolts (Vertex) A Step Clamp engineered to secure workpieces in 20 mm T‑slots on milling tables and machining centres, offering a low‑profile solution for versatile clamping tasks Compact 44x200x28mm footprint Compatible with M20/M18 bolts Designed for 20 mm T‑slots Low weight for easy handling Secure, repeatable fixation for standard T‑slots The clamp delivers secure clamping by matching the most common table standards: compatibility with M20/M18 bolts and a 20 mm T‑slot fit simplifies integration into existing fixtures. By aligning directly with the slot geometry, the device reduces lateral play and supports consistent positioning during repeated operations. This results in improved process stability and fewer re‑setups, helping to maintain throughput in serial machining. Space‑saving design that accelerates setup With a compact footprint of 44x200x28mm and a net weight of 1.44 kg, the clamp occupies minimal table space while remaining straightforward to handle. The low profile reduces interference with tool paths and neighbouring fixturing, allowing closer placement of multiple clamps and faster workpiece access. Fewer obstructions lead to shorter cycle‑time risks and smoother tool changes, which benefits both small shops and production cells seeking efficient layouts. Reliable partner for diverse machining tasks Designed for use on milling tables and machining centres, this clamp supports flexible workholding strategies without demanding bespoke fixtures. The unit’s straightforward geometry makes it suitable for a range of short‑run and repeat production tasks where stable anchoring is required. Provided by Vertex, the solution aligns with industry expectations for consistent mechanical behaviour and straightforward compatibility with standard clamping hardware, assisting shops in achieving dependable results. Discuss specific applications with Metav Werkzeuge in Emmerich — our advisors clarify suitability for particular machines and help source the Vertex Step Clamp (SKU 6336) for immediate integration into existing setups; contact info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 6336 GTIN: 4061905087578 ECLASS: 21170107 Facts Dimensions: 44x200x28mm Weight: 1.44 kg T‑slot: 20 mm Bolt sizes: M20 or M18 Special features Compatible with M20 or M18 bolts Fits 20 mm T‑slots Brand: Vertex FAQ Which T‑slot size does this clamp fit? The clamp is designed specifically for a 20 mm T‑slot, making it suitable for tables and fixtures that use this common standard; the Step Clamp (Vertex, SKU 6336) aligns with the T‑slot geometry for stable fixation. Which bolt sizes are compatible with the clamp? Compatibility with M20 or M18 bolts is specified for this clamp, so standard metric clamping hardware of those sizes can be used with the Vertex Step Clamp. Is the clamp suitable for use on machining centres and milling tables? Yes — the clamp is intended for use on milling tables and machining centres, providing low‑profile, repeatable workholding for a range of machining tasks with standard T‑slot tables. How heavy is the clamp and does that affect handling? The unit weighs 1.44 kg, which supports easy manual handling during setup while providing sufficient mass for stable clamping during typical operations. What should be checked before selecting this clamp for a fixture? Confirm the table uses a 20 mm T‑slot and that clamping hardware is available in M20 or M18 sizes; the Vertex Step Clamp (SKU 6336) is matched to these specifications for direct integration. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
20 mm Step Clamp M20/M18 Bolt, For 38x100x19mm Step, - Vertex
Taking advantage of compact dimensions, reliable T‑slot compatibility and versatile bolt options ensures efficient fixture setup and consistent clamping force for small to medium machining tasks. Order the clamp directly via Metav Werkzeuge or ask our consultants if needed. Step Clamp — Vertex step clamp for 20 mm T‑slot systems, fits M18/M20 bolts A Step Clamp designed for secure workholding on 20 mm T‑slot tables, suitable for machining fixtures and modular clamping setups. Compact size 38 x 100 x 19 mm Compatible with 20 mm T-slot tables Accepts M18 or M20 clamping bolts Lightweight 0.36 kg for easy handling Faster fixture set-up with reliable T‑slot compatibility The compact geometry of the clamp translates into quicker alignment and less obstruction on the table, enabling a streamlined fixture process. Fitting standard 20 mm T‑slot widths and accepting both M18 and M20 clamping bolts, this design reduces the number of specialised parts required in a tooling kit. The result is a practical compromise between universality and precision: fewer changeovers, shorter set-up times and reproducible clamping positions that keep cycle times steady across repetitive tasks. The clear, measurable interface to the machine table supports predictable clamping behaviour and simpler planning of tooling layouts. Space-saving shape that supports accurate machining With outer dimensions of 38 x 100 x 19 mm and a mass of only 0.36 kg, the clamp occupies minimal table real estate while still delivering a stable contact area for the clamping bolt. The low profile helps to avoid interference with cutters and fixtures, which is particularly useful in dense setups or when multiple clamps are required close to the workpiece. The compact form also eases manual handling during fixture changes, improving ergonomics for workshop staff. By combining reduced footprint with a robust interface to the T‑slot, the clamp helps to maintain tool clearance and part accessibility without compromising stability. Consistent clamping for repeatable production Designed for dependable repeatability, the clamp provides a defined support point for routine machining operations. The acceptance of M18 and M20 bolts enables flexible selection of clamping hardware to match clamping force requirements and bolt availability. Manufactured under the Vertex brand, the component aligns with standard workshop practice for modular fixturing and simplifies inventory management through a compact SKU footprint (SKU 6316). Where process stability and reproducible part quality matter, this step clamp offers a straightforward method to standardise clamping across fixtures and machines. Request a technical quote from Metav Werkzeuge in Emmerich for Vertex step clamps compatible with 20 mm T‑slots and receive tailored advice on fixture integration Technical data Article number: 6316 GTIN: 4061905093661 Manufacturer: Vertex Facts Dimensions: 38 x 100 x 19 mm Weight: 0.36 kg T-slot compatibility: 20 mm Special features Accepts M18 or M20 clamping bolts ECLASS: 21170107 SKU: 6316 FAQ Which T‑slot width is the clamp compatible with? The clamp is designed for 20 mm T‑slot tables and provides a standardised interface for modular fixturing. What clamping bolt sizes can be used with this clamp? The clamp accepts both M18 and M20 clamping bolts to accommodate different clamping force needs. What are the external dimensions and weight of the clamp? Dimensions are 38 x 100 x 19 mm and the weight is 0.36 kg, suitable for compact fixture arrangements. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
20,000N Horizontal Clamp With Safety Lock, 65mm Thread Length, Blackened Cast Body - Kukamet
Take advantage of the high holding force and secure locking for reliable fixture clamping; the combination of a horizontal mounting base and robust cast construction ensures repeatable results and long service life. Order the latch clamp directly via Metav Werkzeuge or contact our consultants for technical advice. 341-5-L latching toggle clamp – horizontal base, safety lock (Kukamet) 341-5-L is a latching toggle clamp built for stable horizontal mounting and secure retention in production jigs and fixtures Horizontal base for stable mounting Safety lock prevents accidental release Holding force up to 25,000 N Robust cast body with blackened finish Reliable retention under heavy loads The clamp delivers a holding force of up to 25,000 N and a maximum pressing force of 20,000 N, providing measurable safety margins for demanding holding tasks. The high retention values are particularly useful in machining, welding or assembly fixtures where repeatable clamping pressure reduces rework. The numerical performance figures simplify process planning and allow clear comparison with alternative clamping solutions, supporting efficient decision-making in production environments. Solid mounting and corrosion-resistant finish Fitted with a horizontal base, the unit is suited to bench-top or fixture-mounted applications where lateral stability matters. The cast body with a blackened finish provides mechanical robustness and improved surface protection compared with lightweight stamped alternatives. At approximately 2.235 kg, the clamp combines mass for vibration damping with a compact footprint, helping maintain positional accuracy in repetitive production cycles and prolonging service life under industrial conditions. Fast engagement, precise adjustment The lever-operated toggle mechanism ensures swift engagement and reliable locking, while the thread length 65 mm on the adjustable element enables fine tuning of clamp height and grip point. The integrated hook and the safety lock afford both quick loading and secure retention: the hook speeds set-up and the safety device prevents unintended opening during handling or vibration. These features reduce cycle times and contribute directly to safer, more efficient workflows on the shop floor. Practical integration and supplier reliability Designed for industrial use, the clamp aligns with standard fixture layouts and can be incorporated into modular tooling systems. The clear technical parameters aid integration into quality plans and process documentation. Metav’s supply model adds an operational advantage: centralised distribution from Emmerich acts as a quality filter for European customers, while a broad product range supports consolidated sourcing and reliable replenishment. The result is a pragmatic balance of performance, availability and traceable quality. For robust, repeatable clamping with a proven safety lock, request the Kukamet 341-5-L from Metav Werkzeuge for purchasing and specification support – call +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data Article / model: 341-5-L GTIN: 8680731504750 SKU: 341-5-L Weight: 2.235 kg Core data Max pressing force: 20,000 N Max holding force: 25,000 N Thread length: 65 mm Mounting type: horizontal base Special features Safety lock included With hook for quick engagement Blackened finish with cast body Category: latching toggle clamp FAQ What is the maximum holding force of this clamp? The 341-5-L offers a maximum holding force of 25,000 N, specified for secure retention in fixture applications. Can the clamp be adjusted for different workpiece heights? Yes, the adjustable element features a thread length of 65 mm, allowing precise setting of the clamp point for variable workpiece sizes. Is the clamp suitable for use in welding fixtures? The robust cast body and blackened finish make the clamp suitable for welding and assembly fixtures where mechanical strength and surface protection are required. How does the safety lock work on the latch clamp? The integrated safety lock prevents accidental release of the lever once engaged, ensuring the clamp remains closed under vibration or incidental contact. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
20-133mm Clamping Jaw for T-Slot 24/28mm, M24 Thread - AMF
Take advantage of a compact, versatile clamping solution that combines broad T‑slot compatibility with a wide clamping height range and standard M24 interfacing for efficient fixture setups. Order the Clamping Jaw directly via Metav Werkzeuge or consult our specialists for precise application advice. Clamping Jaw No. 6314V – Clamping jaw for 24/28 mm T‑slots, M24 thread (AMF) The Clamping Jaw No. 6314V is a heavy‑duty clamping component designed for machining fixtures and workholding systems, compatible with both 24 mm and 28 mm T‑slots and engineered to accept standard M24 clamping hardware. Clamps T‑slots 24 mm and 28 mm Wide clamping height 20–133 mm M24 thread for standard clamping bolts Robust 200 mm overall length Secure, adaptable clamping for faster fixture setup The design delivers precise, repeatable holding across a 20–133 mm clamping height, enabling a wide range of workpiece sizes to be secured without auxiliary adapters. Compatibility with 24 mm and 28 mm T‑slots ensures direct integration into common machine tables and fixture plates, reducing setup time and tool changeover. The use of a standard M24 thread means the component mates with widely available clamping bolts, simplifying inventory and procurement decisions while supporting consistent clamping force for stable machining. Built to support reliable production cycles A compact overall length of 200 mm combined with a nominal width of 26 mm provides a sturdy contact surface that maintains alignment under load. The engineered profile promotes uniform pressure distribution across the clamped part, which helps lower vibration and minimise rework. Precision‑manufactured tolerances contribute to predictable repeatability in batch production, so operators and planners can rely on consistent part quality and reduced inspection effort during long runs. Practical procurement and integration benefits for workshops Supplied as a single unit, the component fits seamlessly into existing workholding inventories and aligns with standard industrial fastening practices through its M24‑compatible interface. The straightforward specification reduces the need for bespoke parts and supports consolidation of suppliers for fixture hardware. For customers requiring application guidance, Metav provides technical advice and clear product data to assist selection and ensure the component meets the intended machining requirements. The compact design is particularly suitable for milling fixtures and general clamping tasks in metalworking environments. Contact Metav Werkzeuge for tailored clamping recommendations and specify Clamping Jaw No. 6314V (AMF) for prompt technical guidance and delivery from Emmerich. Technical data Article number: 4000603028NW Type: Nr. 6314V Brand: AMF Product type: Clamping jaw Data T‑slot compatibility: 24 + 28 mm Clamping height: 20 - 133 mm Overall length: 200 mm Width: 26 mm Thread: M24 Pack unit: 1 UID: 4000603028NW Special features Suited for standard M24 clamping systems Compact, robust profile for stable holding Designed for direct use in T‑slot tables Simplifies fixture inventory and setup FAQ What T‑slot sizes does this clamping jaw fit? The clamping jaw fits both 24 mm and 28 mm T‑slots, enabling direct mounting on common machine tables without adapters. What is the usable clamping height range? The device provides a clamping height range of 20–133 mm, allowing secure holding of a broad range of workpiece dimensions. Which thread size is required for the clamping bolts? Clamping bolts or studs with an M24 thread are compatible with the clamping jaw and are the recommended standard for installation. Is the clamping jaw suitable for general milling fixtures? Yes, the geometry and dimensions make the clamping jaw suitable for milling fixtures and standard workholding applications where T‑slot mounting is used. How is the product delivered for procurement purposes? The item is supplied as a single unit (pack unit 1) and is identified by article number 4000603028NW for ordering. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
20.5mm Extension Lever For Clamping Arms, Metal – Kukamet
Take advantage of the combination of robust metal construction, compact cross-section and extended reach for reliable clamping performance in production and workshop settings. Order the extension lever directly via Metav Werkzeuge or consult our specialists for specification support. Extension Lever 220 – Metal extension for toggle clamps, 207 mm (Kukamet) A Extension Lever 220 engineered as an extension for toggle and lever clamps, providing increased reach and a slim profile for tight fixture layouts. Metal construction for high durability 207 mm length for extended reach Slim 20.5 x 8 mm cross-section Lightweight 0.235 kg for easy handling Improved machine uptime through reliable clamping geometry The metal construction and precisely formed profile deliver a durable extension that maintains repeatable clamping geometry under frequent use. Where fixture access is limited, the extended 207 mm length gives a measurable reach advantage, enabling faster set-ups and fewer temporary workarounds. The result is a more efficient workflow and fewer interruptions to production processes, supported by the component’s stable dimensions and predictable behaviour during repeated clamping cycles. Easier integration into existing clamping systems and fixtures With a slim 20.5 x 8 mm cross-section and modest mass of 0.235 kg, the lever integrates smoothly into compact fixtures while reducing inertia during actuation. The elongated form factor reduces the need to redesign neighbouring components and can be used as a direct extension for many lever-style clamps. For procurement and traceability, the part is listed under SKU: 220-4-06-C1 and carries the GTIN: 4061905079511, simplifying stock management and replacement planning. Dependable sourcing, workshop-ready quality and practical benefits Produced by Kukamet, this extension lever offers a straightforward, workshop-oriented solution for extending lever reach without compromising stiffness or serviceability. Sourced and distributed through Metav Werkzeuge’s European supply network, customers benefit from consistent availability and clear product identification. The compact dimensions and robust metal build support a wide range of clamping tasks, helping to standardise spare parts and reduce the variety of bespoke adapters needed in daily operations. Contact Metav Werkzeuge for procurement details or technical advice on integrating the Kukamet Extension Lever 220 into existing clamping systems; assistance is available from our Emmerich location. Technical data Article number: 220-4-06-C1 GTIN: 4061905079511 Manufacturer: Kukamet Dimensions / Core data Height: 207 mm Width: 20.5 mm Thickness: 8 mm Weight: 0.235 kg Features / Applications Material: Metal Application: Extension for lever / toggle clamps Category: Spanner FAQ What materials is the extension lever made from? The extension lever is made from metal, providing the stiffness required for repeated clamping operations. Will this lever fit existing toggle clamps? The lever is intended as an extension for lever and toggle clamps; compatibility should be checked against the clamp’s mounting arrangement using SKU 220-4-06-C1 as a reference. How much additional reach does the extension provide? The component adds an extended reach of 207 mm, suitable for fixtures where extra clearance is required. How heavy is the lever and does it affect actuation? The lever weighs 0.235 kg, a low mass that minimises added inertia and supports responsive clamp actuation. How can this part be identified for ordering or stock control? Order and trace using SKU: 220-4-06-C1 or GTIN: 4061905079511 to ensure correct replacement parts are supplied. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
2000 N Andruckspindel M8x50, Waagerechter Fuß, Schwarz brüniert, 0,415 kg, Keine Besonderheit - Kukamet
Der Vertikalspanner 211 überzeugt durch die Kombination aus hoher Druckkraft und kompakter Bauweise; die Haltekraft von 2500 N sorgt für sichere Fixierung bei Montage- und Prüfaufgaben. Bestellungen und fachliche Beratung erfolgen direkt über Metav, Ihr Präzisions-Partner mit Lager und Qualitätsfilter in Emmerich. Vertikalspanner 211 von Kukamet Der Vertikalspanner 211 ist ein kompakter Hebelspanner für präzise Spannvorgänge in Werkstatt und Produktion Waagerechter Fuß für stabile Montage Druckkraft bis 2000 N Haltekraft bis 2500 N Andruckspindel M8x50 Oberfläche schwarz brüniert Kompakte Bauweise für punktgenaue Spannungen Der Vertikalspanner bietet eine platzsparende Konstruktion, die sich besonders für enge Vorrichtungen eignet. Mit einer Druckkraft von 2000 N lassen sich Werkstücke zuverlässig vorschieben, während die Haltekraft von 2500 N dauerhaft Fixierung gewährleistet. Diese Kennwerte ermöglichen wiederholbare Spannzyklen und reduzieren Ausschuss durch verrutschende Bauteile. Robuste Oberfläche reduziert Wartungsaufwand Die Oberfläche ist schwarz brüniert, was Korrosionsschutz und eine gleichmäßige Optik kombiniert. Das geringe Gewicht von 0,415 kg macht den Spanner handlich und erleichtert den Einsatz in mobilen Vorrichtungen. Dadurch sinkt die Notwendigkeit für häufige Nachbearbeitung und die Lebensdauer der Spannlösung erhöht sich merklich. Einfache Montage dank durchdachter Befestigung Die Befestigung erfolgt über den waagerechten Fuß, der eine stabile Auflage auf Vorrichtungsplatten ermöglicht. Die Andruckspindel M8x50 erlaubt feine Justage und schnellen Wechsel der Spannkraft. Diese Ausführung reduziert Montagezeit und vereinfacht die Integration in Prüfvorrichtungen oder Serienarbeitsplätzen. Vielseitiger Einsatz für Handwerk und Industrie Die Konstruktion eignet sich für Produktionslinien, Montagearbeitsplätze und Feinmechanik-Werkstätten. Anwender profitieren von der robusten Bauweise und einfachen Handhabung bei wiederkehrenden Spannvorgängen. Als kompakte Spannlösung ist das Produkt besonders dort sinnvoll, wo Wiederholgenauigkeit und Platzersparnis gefragt sind. Empfehlung: Für präzise Spannaufgaben empfiehlt Metav den Vertikalspanner 211 von Kukamet als zuverlässige und kompakte Lösung; Bestellungen und technische Rückfragen per eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 Produktmerkmale Artikelnummer: B211-3 Marke: Kukamet Bezeichnung: Vertikalspanner 211 eClass: 21041717 ETIM: EC011973 Fakten Druckkraft max: 2000 N Haltekraft max: 2500 N Gewicht: 0,415 kg Besonderheiten Befestigungsart: waagerechter Fuß Andruckspindel: M8x50 Material: Schwarz brüniert Besonderheit: Keine Hebelspanner FAQ Wie hoch ist die maximale Druckkraft und was bedeutet das für den Einsatz? Die maximale Druckkraft von 2000 N beim Vertikalspanner 211 von Kukamet (Artikelnummer B211-3) erlaubt das sichere Vorschieben von Bauteilen in Vorrichtungen und sorgt für wiederholbare Positioniergenauigkeit in Montage- und Prüfprozessen. Ist der Spanner für korrosive Umgebungen geeignet? Der Vertikalspanner 211 besitzt eine schwarz brünierte Oberfläche, die erhöhten Korrosionsschutz bietet. Für stark aggressive Umgebungen sollten zusätzliche Schutzmaßnahmen geprüft werden. Welche Befestigungsart ist vorgesehen und wie wird montiert? Der Spanner verfügt über einen waagerechten Fuß zur stabilen Montage auf Vorrichtungsplatten. Die Andruckspindel M8x50 ermöglicht Feineinstellung und schnelle Fixierung beim Einbau. Für welche Anwendergruppen ist der Spanner besonders geeignet? Der Vertikalspanner 211 von Kukamet richtet sich an Werkstätten, Industrieanwender und den Fachhandel, die platzsparende und belastbare Spannlösungen für Serien- oder Einzelanwendungen benötigen.
2000 N Closure Clamp Vertical Base With Hook, 41mm Thread Length, 0.325kg - Kukamet
The combination of 2,500 N holding force, a compact lever-operated hook, and vertical-foot mounting delivers dependable retention for repetitive fixture work; procure the clamp via Metav Werkzeuge or consult the team for specification advice. Locking clamp 412 by Kukamet — vertical-foot lever clamp with hook and high holding force Locking clamp 412 is a lever-operated locking clamp for fixture and bench use, combining a hook-equipped latch with vertical-foot mounting to secure parts reliably in repetitive assembly or welding applications. Lever-operated locking clamp, hook-equipped Vertical-foot mounting for bench or fixture Holding force 2,500 N for secure retention Blackened finish for wear resistance Secure retention for repetitive clamping The lever design provides rapid engagement and repeatable clamping with clear numerical performance: a holding force of 2,500 N and a maximum clamping force of 2,000 N. These figures translate into reliable part retention during machining, welding or assembly, reducing rework and cycle interruptions. The mechanical over-centre action ensures the workpiece is held with consistent force, making the clamp particularly suitable for production jigs where reproducibility is a priority. Specification-driven performance supports planning for fixture loads and safety margins. Robust construction for workshop and fixture use Built with a blackened finish for improved surface wear resistance and a compact mass of 0.325 kg, the component offers a durable balance between strength and low weight. The vertical-foot mounting enables straightforward installation onto plates or tooling blocks, while the included hook provides a positive engagement point for latches or mating fixtures. The nominal thread length of 41 mm allows depth adjustment when integrating the clamp into pre-drilled fixtures. The combination of durable surface treatment and precise mechanical geometry reduces maintenance intervals and supports long-term reliability in demanding shop environments. Fast handling and straightforward integration The lever-action mechanism and hook-equipped latch permit quick part loading and unclamping, improving throughput where frequent operations occur. The compact footprint and vertical-foot base mean the unit is compatible with tight fixture layouts and can be positioned close to machining or welding zones without impeding access. Simple mechanical operation eliminates the need for auxiliary power, while the clear load ratings simplify selection for specific tasks. For project planning, the clamp’s measured forces and dimensional attributes aid in designing secure, space-efficient fixtures. Contact Metav Werkzeuge for specification support or to request delivery options for the Kukamet locking clamp 412; technical consultants at Metav Werkzeuge can advise on integration into production jigs and fixture layouts. Technical Data Article number: B412-3 GTIN: 8680731508642 Brand: Kukamet eClass: 21041718 ETIM: EC011973 Numbers / Core technical data Max clamping force: 2,000 N Max holding force: 2,500 N Weight: 0.325 kg Thread length: 41 mm Designs / Special features Vertical-foot mounting Hook-equipped latch Material / Finish: blackened finish Category: Clamps Asset: catalogue page PDF available FAQ What is the difference between clamping force and holding force? The clamping force (2,000 N) is the applied force when the lever is engaged; the holding force (2,500 N) is the maximum retention the latch provides under shear or pull. The Kukamet locking clamp 412 specifies both values for fixture design. How is the clamp mounted to a jig or bench? Mounting is by the vertical-foot base. The vertical-foot arrangement on the locking clamp 412 enables secure bolting to plates or fixture blocks. Does this model include a hook for latching? Yes. The unit is hook-equipped, providing a positive engagement point for latches and mating fixtures on the Kukamet clamp 412. What dimensions affect installation depth? The thread length of 41 mm determines the installation depth and adjustment range; this should be considered when planning bolting and clearances for the clamp in fixtures. Is the finish suitable for workshop environments? The blackened finish on this locking clamp offers enhanced surface wear resistance and helps protect against mild corrosion in typical workshop conditions. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
2000 N Druckkraft, Silikonbeschichteter Griff, waagerechter Fuß, 40mm Gewindelänge, mit Haken, 0,24kg - Kukamet
Der robuste Einsatz des Verschlussspanners überzeugt durch die Kombination aus Edelstahl-Konstruktion, hoher Haltekraft und dem silikonbeschichteten Griff für rutschfesten Halt; bestellen Sie den Verschlussspanner direkt über Metav Werkzeuge oder fragen Sie unsere Beratung bei Bedarf an. Verschlussspanner Kukamet 361 Der Verschlussspanner ist ein robuster Hebelspanner aus Edelstahl zur sicheren Fixierung von Werkstücken in Werkstatt und Produktion. Edelstahlbauweise, langlebig und rostarm Haltekraft 2.500 N für sicheres Fixieren Druckkraft 2.000 N für kraftvolles Spannen silikonbeschichteter Griff für ergonomischen Halt waagerechter Fuß mit Haken zur schnellen Montage Robuste Konstruktion für dauerhaften Werkstatteinsatz Die solide Edelstahl-Ausführung sorgt für Beständigkeit gegen Korrosion und reduziert Wartungsaufwand. Durch die kompakte Bauform bleibt die Handhabung einfach, während die Konstruktion gleichzeitig eine hohe Lebensdauer ermöglicht. Das geringe Gewicht unterstützt die flexible Nutzung an verschiedenen Spannplätzen ohne unnötige Belastung. Leistung klar erklärt: Haltekraft und Druckkraft in der Praxis Die technische Unterscheidung zwischen Druckkraft und Haltekraft entscheidet über passende Anwendungen: Die Druckkraft von 2.000 N beschreibt die Kraft, die beim Schließen aufgebracht wird, während die Haltekraft von 2.500 N angibt, welche Kraft das gespannte Werkstück dauerhaft hält. Diese Kennwerte erleichtern die Auswahl für Anwendungen mit mittlerer bis hoher Spannanforderung und sorgen für reproduzierbare Spannresultate. Ergonomie und Montagekomfort für den Werkstattalltag Der silikonbeschichtete Griff bietet sicheren Halt auch bei öligen oder feuchten Händen und reduziert Ermüdungserscheinungen bei wiederholter Nutzung. Die Befestigungsart mit waagerechtem Fuß und integriertem Haken ermöglicht eine schnelle Montage an Standardaufspannungen und vereinfacht den Wechsel zwischen Werkstücken ohne zusätzlichen Werkzeugaufwand. Einsatzfelder und Zielgruppe: wo dieses Werkzeug glänzt Der Spanner ist ausgelegt für Anwender in Handwerk und Leichtindustrie, die eine kompakte, zuverlässige Spannlösung benötigen. Besonders geeignet ist das Produkt für Montagearbeiten, Vorrichtungsbau und wiederkehrende Fixieraufgaben, bei denen Robustheit und einfache Bedienung im Vordergrund stehen. Fachbetriebe profitieren von der klaren Leistungsangabe und der langlebigen Materialwahl. Empfehlung: Für sichere Fixierung in Werkstatt und Produktion empfiehlt Metav Werkzeuge die Nutzung des Kukamet Verschlussspanners 361; bei offenen Fragen erreichen Sie unsere Technikberatung per eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 Produktmerkmale Artikelnummer: S361-3-K Marke: Kukamet Bezeichnung: Verschlussspanner 361 Daten Druckkraft Max: 2000 N Haltekraft Max: 2500 N Gewindelänge: 40 mm Gewicht: 0,24 kg Besonderheiten Material: Edelstahl Befestigungsart: waagerechter Fuß Mit Haken silikonbeschichteter Griff Hebelspanner (Einsatztyp) eClass: 21041718 (Produktklassifikation) ETIM: EC011973 (Technische Klassifikation) FAQ Wie hoch ist die maximale Haltekraft des Verschlussspanners? Die maximale Haltekraft des Verschlussspanners von Kukamet beträgt 2.500 N und eignet sich für mittlere bis hohe Spannanforderungen in Werkstatt und Produktion; nutzen Sie diese Angabe zur Auswahl passender Spannvorrichtungen. Welches Material hat der Spanner und welche Vorteile bietet es? Der Kukamet Verschlussspanner ist aus Edelstahl gefertigt, was Korrosionsbeständigkeit und Langlebigkeit gewährleistet und somit Wartungsintervalle reduziert. Ist der Griff für den Dauereinsatz geeignet? Ja, der silikonbeschichtete Griff des Verschlussspanners bietet rutschfesten Halt und erhöht den Bedienkomfort bei wiederholten Spannvorgängen. Wie befestige ich den Spanner an Prüf- oder Spannsystemen? Der Spanner verfügt über einen waagerechten Fuß und einen Haken zur einfachen Montage an Standardaufspannungen; die Gewindelänge beträgt 40 mm und erleichtert die Integration. Wofür eignet sich die Druckkraftangabe von 2.000 N? Die Druckkraft von 2.000 N beschreibt die beim Schließen erreichte Kraft und ist relevant bei Anwendungen, bei denen ein kräftiges Andrücken erforderlich ist, etwa beim Fixieren schwererer Werkstücke.
2000 N Horizontal Base Combination Clamp, Zinc-Plated, 0.8 kg - Kukamet
Take advantage of a robust, galvanised construction combined with a reliable 2,000 N clamping and holding capacity to keep fixtures secure and setups consistent; order the clamp directly via Metav Werkzeuge or consult our team for specification support. Combination clamp 712 — Kukamet with galvanised finish and 2,000 N capacity A Kukamet combination clamp designed for fixed-mount applications that provides dependable lever-action clamping with a horizontal base for stable installation Combination lever clamp for versatile securing 2,000 N clamping and holding force Galvanised finish for corrosion resistance Horizontal base for fixed mounting Dependable clamping power for repetitive work The combination clamp delivers a rated 2,000 N of clamping and holding capacity, ensuring consistent force across repetitive cycles. Such a defined force rating supports predictable part retention in jig and fixture environments, improving process stability and reducing rework. By specifying a clamp with this level of performance, production planning benefits from a predictable clamping behaviour and reduced variability during machining or assembly operations. The lever mechanism provides quick actuation for repeat tasks, offering quick clamping without sacrificing holding force, which is essential for stable, accurate manufacturing sequences. Designed for workshop environments and simple installation Constructed with a galvanised finish, the clamp resists corrosion in workshop conditions and maintains appearance and functionality over time. The horizontal base mounting allows secure attachment to tables, jigs or subplates, keeping the fixture low and unobtrusive while delivering a stable anchoring point. At approximately 0.8 kg, the component is lightweight enough for easy handling during fixture assembly yet substantial enough to offer reliable operation. This combination of robust surface protection and compact mass minimises downtime during installation and supports long-term availability in demanding production settings. Efficient operation through proven lever mechanics The lever-operated design converts manual input into consistent clamping force with a clear mechanical advantage, enabling rapid part securing and release. The term "combination" in this context refers to the clamp’s adaptable use in both clamping and locating roles within a fixture layout. For users unfamiliar with clamping terminology: clamping force denotes the active compressive force applied to a workpiece, while holding force refers to the maximum load the clamp can resist without releasing. The simple mechanical layout reduces maintenance points, and the familiar lever action supports quick operator training, increasing throughput where frequent part changes are required. Where this clamp proves most valuable The 712 model is particularly suitable for fixed jigs, assembly benches and production fixtures where a compact, durable clamp with repeatable force is needed. Its mounting style and corrosion-resistant finish suit environments where equipment is permanently installed or subject to regular cleaning. Integrators will find the clamp straightforward to incorporate into bespoke fixtures or standardised tooling setups, improving cycle times through rapid actuation and dependable component retention. The unit’s compact footprint also helps keep tooling profiles low, aiding accessibility during downstream operations. For reliable supply and specification support, consult Metav Werkzeuge to source the Kukamet combination clamp 712 and to discuss fixture integration or ordering details — contact via info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number / SKU: 712-2 GTIN: 8680731504316 Manufacturer: Kukamet Facts Maximum clamping force: 2,000 N Maximum holding force: 2,000 N Weight: 0.8 kg ECLASS: 21021004 ETIM: EC011973 Special features Material: galvanised Mounting: horizontal base Type: combination / lever clamp Category: clamps FAQ What load can the combination clamp 712 safely hold? The combination clamp 712 is rated for a maximum clamping and holding capacity of 2,000 N, which defines its safe working range for securing parts in fixtures. How is the clamp mounted in a fixture? The unit uses a horizontal base for fixed mounting; this format enables secure attachment to tables, jigs or subplates for stable operation. What surface protection does the clamp have? The clamp is supplied with a galvanised finish, offering corrosion resistance suitable for workshop and industrial environments. Is the lever action suitable for frequent use? Yes, the lever-operated mechanism is designed for rapid actuation and repetitive cycles, reducing operator effort while maintaining consistent clamping performance. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
2000 N Pneumatic Clamp Horizontal Base Zinc-Plated, 2000 N Holding Force - Kukamet
The compact, zinc-plated pneumatic clamp combines reliable 2000 N clamping performance with a horizontal-foot mounting for straightforward fixture integration; its light weight and pneumatic actuation ensure fast, repeatable cycles across assembly and machining jigs. Order the Pneumatic clamp 691 directly via Metav Werkzeuge or consult our advisors for specification matching. Pneumatic clamp 691 by Kukamet — 2000 N, zinc-plated pneumatic clamp The Pneumatic clamp 691 is an air-operated clamping device for fixtures and jigs, built for horizontal-foot mounting in light industrial and workshop environments. 2000 N clamping force Pneumatic actuation for fast cycles Horizontal-foot mounting Zinc-plated corrosion resistance Consistent, measurable clamping for production use Designed for reliable repeatability, this pneumatic clamp delivers a 2000 N maximum clamping and holding force that supports dependable workpiece fixation during machining and assembly. The air-driven mechanism provides consistent actuation stroke and clamping pressure, reducing variation between cycles; this measurable performance helps to maintain process quality and lowers scrap rates. The combination of pneumatic actuation and a clearly stated holding force provides a practical, verifiable basis for fixture planning and process documentation. Straightforward installation with horizontal-foot mounting A horizontal-foot mounting simplifies attachment to plates and fixtures, enabling fast integration into existing jigs or custom tooling. The horizontal-foot mounting reduces the need for special brackets and aligns the clamp body close to the work surface, improving access and tool clearance. The zinc-plated finish protects the clamp body against corrosion in workshop atmospheres, offering durability without specialised maintenance, which supports longer service intervals and predictable uptime. Lightweight build that improves handling and cycle dynamics At just 1.173 kg, the clamp’s compact construction reduces the inertial load on moving fixtures and eases handling during assembly or retrofitting. The lower mass contributes to quicker acceleration and deceleration of clamped assemblies, supporting faster cycle times where pneumatic systems are used. The compact footprint and moderate weight also make the device suitable for smaller fixtures where space and balance are critical design considerations. Robust choice for workshops and small-scale production Built as a practical clamping solution, the device suits repair shops, small production cells and tooling benches where repeatable pneumatic fixation is required. The solid zinc-plated body and standardised mounting mean it integrates well with modular fixturing and mechanical stop systems. For applications demanding predictable clamping forces and straightforward installation, this clamp offers a balance of durability, measurable performance and ease of use that supports process reliability. Contact Metav Werkzeuge to discuss the Kukamet Pneumatic clamp 691 for reliable 2000 N clamping and efficient fixture integration Technical data Article number: 691-2 GTIN: 8680731504972 Manufacturer: Kukamet eClass: 21021004 ETIM: EC011973 Core specifications Clamping force max: 2000 N Holding force max: 2000 N Weight: 1.173 kg SKU: 691-2 Features and materials Material: zinc-plated Mounting: horizontal foot Actuation: pneumatic clamp Category: Spanner FAQ What is the maximum clamping force of the clamp? The Pneumatic clamp 691 provides a maximum clamping and holding force of 2000 N, specified for consistent fixation in typical workshop tasks. How is the clamp mounted to a fixture? Mounting is via a horizontal foot, enabling the clamp to be fastened directly to plates and modular fixture components for compact integration. What finish protects the clamp from corrosion? The clamp is zinc-plated, offering corrosion resistance suitable for standard workshop environments without special treatment. Is the clamp suitable for retrofit into existing jigs? Yes, the compact weight of 1.173 kg and horizontal-foot mounting make the clamp well suited to retrofitting into existing fixtures and jigs. Who supplies this product and where can further technical details be obtained? Kukamet supplies the pneumatic clamp 691; for additional technical detail, Metav Werkzeuge can provide specification matching and advice. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
2000 N Toggle Clamp Horizontal Base With Hook, Stainless Steel 41mm Thread Length - Kukamet
Take advantage of stainless-steel durability, a compact 0.325 kg body and proven clamping forces for secure, repeatable fixture work; order the latch directly via Metav Werkzeuge or ask our consultants for application advice. Toggle latch clamp 411 (S411-3) — Stainless steel, hook version by Kukamet The Toggle latch clamp 411 is a compact closure clamp designed for secure fastening and repeatable holding in assembly, jig and fixture applications, featuring a horizontal mounting foot and integrated hook. Stainless steel construction Horizontal base for simple mounting Holding force up to 2,500 N Integrated hook for secure engagement Consistent holding for reliable production The clamp delivers a defined holding force of 2,500 N and a closing force of 2,000 N, ensuring components remain fixed throughout machining or assembly operations. The mechanism translates manual lever movement into a high clamping force, which reduces cycle-time losses caused by readjustment. Because the clamp is made of stainless steel, it sustains repeated use in workshop environments and resists corrosion, providing a predictable service life that supports consistent production throughput. Fast installation and space-efficient mounting A horizontal mounting foot allows the clamp to be fixed close to the workpiece on flat surfaces, saving space on fixtures and simplifying layout. The compact mass of 0.325 kg and the 41 mm thread length enable quick fitting and straightforward alignment in tight assemblies. The integrated hook provides a secure engagement point that prevents accidental release under vibration, so fixtures remain set without extra locking steps — an efficient choice for jigs where accessibility and compactness matter. Durable materials and straightforward function Constructed from stainless steel, the latch offers enhanced resistance to wear and environmental influences compared with untreated alternatives. The simple lever action requires minimal maintenance and can be inspected visually during routine checks. The robust build and proven toggle principle translate into low downtime and reliable clamping behaviour, which supports process stability and reduces the risk of workpiece movement during subsequent operations. Suitable uses and handling advice Typical applications include small fixtures, transport closures and production jigs where a compact yet powerful clamp is required. The device’s geometry and hook make it suited to repeatable manual operation and medium-duty automated handling. For projects requiring traceable components, the SKU S411-3 and GTIN allow clear identification within inventory systems and assembly documentation. Contact Metav Werkzeuge today for specification matching or to discuss how the S411-3 can be integrated into existing fixtures; email info@metav-werkzeuge.com or call +49 2822 7131930 to consult our specialists Technical data Article number: S411-3 GTIN: 8680731504156 ECLASS: 21041718 ETIM: EC011973 Manufacturer: Kukamet Facts Closing force (max): 2,000 N Holding force (max): 2,500 N Thread length: 41 mm Weight: 0.325 kg Special features Material: stainless steel Mounting type: horizontal foot With hook (integrated) Category: clamp (toggle latch) FAQ What clamping forces does the latch provide? The latch offers a closing force of 2,000 N and a holding force of 2,500 N, giving secure retention for medium-duty fixtures with the S411-3. Is the clamp suitable for corrosive or humid environments? Made from stainless steel, the toggle latch is suitable for environments where corrosion resistance is required, supporting longer service life. How is the latch mounted to a fixture? The clamp is fitted via a horizontal mounting foot and a 41 mm thread length, enabling straightforward installation on flat surfaces. Can this latch be used for transport closures and jigs? Yes. The integrated hook and robust holding capacity make it appropriate for transport closures, jigs and repeated manual engagement. How can the product be identified in inventory systems? The item is supplied as SKU S411-3 and GTIN 8680731504156 for clear identification and traceability across documentation. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
2000 N Toggle Clamp Horizontal Base, Silicone-Coated Handle, 40mm Thread Length, Zinc-Plated, With Hook - Kukamet
Take advantage of the combination of secure holding force and ergonomic operation for consistent, repeatable clamping in assembly and fixture applications. Order the clamp directly via Metav Werkzeuge or consult the Metav team for configuration and application advice. Toggle Latch Clamp 361-3-K — horizontal-base toggle latch with silicone-coated handle (Kukamet) The Toggle Latch Clamp 361-3-K is a heavy-duty closure clamp designed for horizontal-base mounting, combining a silicone-coated handle with a hooked latch for fast and secure fastening in workshops and light industry. Horizontal base for stable mounting Silicone-coated ergonomic handle Holding force up to 2,500 N Zinc-plated corrosion resistance Secure, measurable clamping for production processes The 361-3-K delivers clearly defined clamping values that support process reliability: a holding force of 2,500 N and a pressing force of 2,000 N, which helps to minimise slippage and rework in repetitive operations. These quantifiable figures make it straightforward to specify the clamp in jigs and fixtures, allowing planners to calculate loads and safety margins precisely. The relatively low mass of the device also reduces dynamic load on moving assemblies while maintaining consistent performance. Ergonomic design that reduces fatigue and resists wear Ergonomics and longevity are combined in the silicone-coated handle, which improves grip and dampens vibration during repeated operation, while the zinc-plated steel construction offers durable corrosion resistance in typical workshop environments. The hooked latch provides positive engagement and prevents accidental release, which reduces the likelihood of production interruptions. Maintenance is straightforward: the robust finish limits corrosion-related service, and replacement of wear items is simplified by the clamp’s conventional geometry. Fast fitting and flexible use across fixtures The horizontal-base mounting allows quick installation to flat plates or assembly frames, and the integrated hook supports a variety of latch points for adaptable fixturing. The clamp’s thread length 40 mm enables fine adjustment of engagement depth, so alignment tolerances can be compensated without additional shims. Where compact, repeatable closure is required, this toggle latch is a practical solution for small-batch production, inspection fixtures and repetitive assembly operations. For specification checks or application matching, Metav’s technical advisers can provide further data and recommendations. Contact Metav Werkzeuge for tailored advice on integrating the Kukamet 361-3-K into existing fixtures — Metav’s team in Emmerich can advise on mounting options and compatibility with specific applications Technical Data SKU: 361-3-K GTIN: 8680731509991 E-class: 21041718 ETIM: EC011973 Facts Weight: 0.24 kg Max pressing force: 2,000 N Max holding force: 2,500 N Thread length: 40 mm Special features Horizontal base (waagerechter Fuß) Silicone-coated handle Zinc-plated finish Hooked latch included FAQ What materials can this toggle latch be used with? The Kukamet Toggle Latch Clamp 361-3-K is suitable for attachment to metal fixtures and mounting plates; its zinc-plated finish provides corrosion resistance appropriate for steel and aluminium assemblies. How is the clamp mounted to a fixture? Mounting is via the horizontal base; the clamp is designed for fastening to flat surfaces and can be secured with standard fasteners sized to the base holes. What does the holding force specification mean in practice? A rated holding force of 2,500 N indicates the maximum static retention capacity under ideal conditions; the 361-3-K therefore provides robust retention for many light-to-medium assembly tasks. Is the latch adjustable for different engagement lengths? Yes, the clamp features a threaded engagement with a thread length of 40 mm, allowing adjustment of the hook position and engagement depth to suit varying latch points. Does the handle coating improve operator comfort? The silicone-coated handle reduces hand fatigue and provides a secure grip during frequent actuation, making the clamp suitable for repetitive manual use. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
2000 N Toggle Clamp U-Base With Hook, 2500 N Holding Force, 41 mm Thread Length - Kukamet
Compact, secure clamping with measurable performance: the locking mechanism delivers a clamping force of 2,000 N and a holding force of 2,500 N, ensuring repeatable fixturing in small assemblies and jigs. The U-base mounting and hook attachment provide stable installation and quick repositioning — order the clamp directly via Metav Werkzeuge or consult the Metav team for application advice. Locking toggle clamp 413 — Compact lever clamp with U-base by Kukamet Locking toggle clamp 413 is a compact lever clamp designed for repetitive fixture work and secure closure in jigs, fixtures and small assembly applications. U-base mounting for stable installation Clamping force up to 2,000 N Holding force up to 2,500 N Blackened finish for low-reflective surface Secure, measurable clamping for repeatable production The clamp provides a precise clamping force that supports consistent machining and assembly cycles. With a rated clamping force of 2,000 N and an independently rated holding force of 2,500 N, the device separates operational pressure from static retention to reduce slippage and rework. The compact lever design reduces operator effort while maintaining a reliable closure; this makes the clamp particularly suitable where space is limited but repeatability is essential. Technical data sheets are available for further validation. Stable installation and flexible attachment options A U-base fastening delivers a robust anchoring point for bench or fixture mounting, while the integrated hook enables quick engagement with mating parts. The clamp features a thread length of 41 mm, permitting straightforward height adjustment and alignment in bespoke fixtures. At 0.285 kg the unit is light enough for manual positioning yet solid in operation. The blackened finish reduces surface reflection in visual inspection setups and offers basic protection against handling wear. Applications, durability and maintenance Designed for workshop and light industrial use, the lever clamp excels in jigs, holding fixtures and repeat assembly tasks where secure closure and fast cycle times matter. The simple mechanical construction limits maintenance to routine inspection and lubrication of the pivot points; replacement or adjustment of the threaded spindle restores clamping position without special tooling. For application-specific guidance or additional technical data, Metav Werkzeuge can supply drawings and compatibility advice to support integration into existing production processes. Contact Metav Werkzeuge for tailored advice on integrating the Kukamet locking toggle clamp 413 into production setups and to request technical drawings or order information. Technical Data SKU: B413-3 GTIN: 8680731508666 ECLASS: 21041718 ETIM: EC011973 Model: 413 Facts Weight: 0.285 kg Maximum clamping force: 2,000 N Maximum holding force: 2,500 N Thread length: 41 mm Mounting: U-base Special features Material / finish: blackened finish With hook attachment Category: clamp / spanner Story trigger: lever clamp Manufacturer: Kukamet FAQ What clamping and holding forces does this clamp provide? The Kukamet locking toggle clamp 413 offers a clamping force of 2,000 N and a holding force of 2,500 N (SKU B413-3). How is the clamp mounted? Mounting is via a U-base, allowing secure installation on benches or fixtures; the clamp also features a hook for quick engagement. What is the thread length for height adjustment? The thread length is 41 mm, enabling straightforward spindle adjustment for precise alignment. Is the clamp suitable for repetitive assembly tasks? Yes, the lever-style mechanism and rated forces make the clamp well suited to repetitive fixturing and small assembly operations. What finish and upkeep are recommended? The unit has a blackened finish; maintenance is limited to routine inspection and lubrication of pivot points to ensure long service life. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
2000 N Toggle Clamp Vertical Base With Hook, Zinc Plated, 41mm Thread Length - Kukamet
Benefit from a galvanised latch clamp that combines sturdy vertical-foot mounting with a 2,500 N holding force for reliable, repeatable closures in production environments. Order the 412-3 directly via Metav Werkzeuge or consult our specialists for application guidance. Latch clamp 412 — galvanised closure clamp with 2,500 N holding force (Kukamet) Latch clamp 412 is a compact closure clamp designed for secure, repeatable locking in jigs, fixtures and small assemblies across industrial workshops. Galvanised steel finish for corrosion resistance Vertical-foot mounting for stable installation Holding force 2,500 N secures the workpiece Integrated hook allows fast engagement Secure clamping for continuous production The galvanised latch clamp delivers a dependable mechanical solution where repeatability matters. The combination of a 2,500 N holding force and a 2,000 N closing force ensures components remain fixed under dynamic loads, reducing rework and downtime. Galvanising protects the clamp against corrosion in humid or workshop environments, extending service life and preserving clamp geometry. The compact, lightweight construction at 0.325 kg allows simple handling and fast replacement without sacrificing stability. Simple mounting and quick engagement save time Equipped with a vertical-foot mounting arrangement and an integrated hook, the device installs directly on machine tables or fixtures and enables rapid engagement and release. The 41 mm thread length supports precise height and position adjustment; this adjustability is beneficial when aligning parts for welding, assembly or inspection. As a mechanical lever clamp, it avoids electrical complexity and supports straightforward maintenance routines, simplifying process integration on assembly lines and in toolrooms. Durable finish and broad workshop use Manufactured in galvanised material, the clamp resists surface wear and maintains reliable contact geometry even with frequent operation. The robust design suits a wide range of workshop uses, from fixture building to light-duty holding tasks in metalworking and fabrication. The compact format of the latch supports dense fixture layouts where space is limited while still offering a reassuring holding capacity that meets industry requirements. Specifications and stable performance make this an economical choice for standardised fixturing. Choose the Kukamet latch clamp 412 for robust, repeatable closures and contact Metav Werkzeuge in Emmerich for tailored advice and reliable supply from stock. Technical data Article number: 412-3 GTIN: 8680731502565 Brand: Kukamet SKU: 412-3 Facts Weight: 0.325 kg Max closing force: 2,000 N Max holding force: 2,500 N Thread length: 41 mm Special features Material: galvanised Mounting: vertical foot Hook: integrated eClass: 21041718 ETIM: EC011973 FAQ What is the difference between closing force and holding force? Closing force refers to the force applied during engagement, while holding force indicates the sustained load the latch clamp can resist; the Kukamet latch clamp 412 offers a closing force of 2,000 N and a holding force of 2,500 N. Can this clamp be mounted on a machine table with pre-drilled holes? Yes, the vertical-foot mounting of the latch clamp 412 is suitable for direct attachment to tables and fixtures with compatible hole patterns, and the 41 mm thread length allows fine height adjustment. Is the surface treatment suitable for outdoor or humid workshop use? The galvanised finish provides good corrosion resistance for humid workshop environments and occasional outdoor exposure, prolonging the functional life of the closure clamp. Does the clamp include a hook for quick locking? Yes, the unit is supplied with an integrated hook to facilitate fast engagement and secure latching in repetitive assembly operations. What is the weight and how does that affect fixture design? At 0.325 kg, the latch clamp is lightweight, which simplifies handling and reduces added mass in fixtures while still delivering the rated holding capacity. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Secure components with reliable workpiece clamps
Workpiece clamps, also known as workholding clamps or workholding devices, form the essential mechanical interface between machine and part in industrial fabrication. They keep components absolutely play-free, positionally accurate and vibration-resistant during milling, turning, drilling or grinding.
How workpiece clamps ensure process stability
A correctly specified clamping concept transfers the high cutting and feed forces of modern CNC machines into the machine table or spindle without deforming the part. The right combination of mechanical, hydraulic, pneumatic or magnetic solutions enables fast, repeatable setups and supports automated part change where required. Typical applications range from single-part turning to high-volume series milling and complex five-axis machining.
Concrete production benefits at a glance
- repeatable positioning: reduces scrap and rework
- high clamping forces: withstands aggressive cutting without part movement
- reduced set-up time: modular systems and quick-change features speed throughput
- improved surface finish: vibration damping for finer results and tighter tolerances
- flexible compatibility: vices, chucks, clamping plates and zero-point systems for diverse geometries
Why Metav's range is the practical choice
Metav combines decades of specialist know-how with a broad, handpicked range that democratises precision for workshops and industry alike. Based in Emmerich, Metav acts as a quality filter for the European market and supplies more than 250,000 products from precision metrology to complete workshop equipment. With the trust of over 48,000 customers, Metav offers a single-source approach that reduces supplier complexity and secures dependable delivery to your workbench.
Technical data
- function: mechanical interface between machine and workpiece
- primary requirements: absolute positional accuracy; vibration reduction; high clamping forces
- technologies: mechanical, hydraulic, pneumatic, magnetic
- typical components: machine vices; chucks; clamping plates; zero-point systems; pratzen; clamping jaws
- application areas: milling; turning; drilling; grinding; automated part change systems
- production benefits: reduced set-up time; enhanced process security; optimised series and single-part production
The practical summary
Workpiece clamps bring the stability and repeatability required to meet tight tolerances and excellent surface quality, making them indispensable across machining operations. Choosing the right workholding clamps and modular workholding devices is a decisive step towards higher productivity and consistent part quality.
FAQ
What types of workpiece clamps are suitable for automated machining?
Workholding clamps with quick-change modules, hydraulic actuation or magnetic systems are commonly used for automated machining. These workholding devices enable fast, repeatable part changes and integrate with zero-point systems.
How do workpiece clamps affect surface finish and tolerances?
A stable clamping concept minimises vibration and part movement; this improves surface finish and supports achieving narrow tolerances when using high-precision workpiece clamps or workholding devices.
Can the same workpiece clamps handle different part geometries?
Modular workholding clamps and adaptable clamping jaws allow flexible fixturing for varied geometries; combining vices, clamping plates and pratzen increases versatility on the shopfloor.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com