Secure and precise workholding for metalworking productivity
Workholding devices such as workpiece clamps and chuck systems provide absolute positional stability and vibration damping during milling, turning, drilling and grinding, ensuring parts remain free of play under high CNC cutting and feed forces. By transferring clamping loads into the machine table or spindle without deforming the component, a well engineered workholding solution improves machining accuracy, surface finish and process reliability while reducing set-up times. Modular systems from machine vices and chucks to zero-point systems and specialised fixtures enable fast changeovers and support both serial and single-part production, delivering consistent clamping force, repeatability and enhanced throughput.
2000 N Vertical Clamp 111mm Arm, Massive Holding Arm With Safety Lock, Blackened Finish - Kukamet
Robust clamping and compact installation reduce setup time while keeping workpieces secure under repeat load. With a 111 mm massive arm, an integrated safety lock and rated holding force of 2,500 N, this clamp combines reliability and space-saving mounting for fast fixture changes. Order or request advice via Metav Werkzeuge for direct supply from Emmerich. Vertical toggle clamp 213 — Angle-base vertical clamp with 111 mm arm (Kukamet) The Vertical toggle clamp 213 is a compact vertical clamping device designed for secure fixture holding in jigs, small assemblies and repetitive production tasks. Angle-base mounting for flexible installation Massive holding arm with safety locking Max holding force 2,500 N, clamping force 2,000 N 111 mm arm length, lightweight at 0.43 kg Secure hold for repetitive production and tooling The combination of a high holding force and a defined clamping force delivers consistently secure workpiece retention across repeated cycles. Rated at 2,500 N holding force and 2,000 N clamping force, the device is suited to light- and medium-duty fixtures where repeatability and safety matter. The mechanism’s toggle geometry converts operator input into reliable clamping pressure, ensuring short cycle times and reduced rework risk. This technical consistency supports predictable assembly times and higher throughput without complex adjustments. Flexible mounting that saves space on the bench Equipped with an angle base, the clamp allows installation on vertical or angled surfaces, optimising use of available fixture space and enabling closer pack-outs in jigs. The 111 mm arm provides reach without excessive overhang, while the compact footprint of the base reduces interference with neighbouring tooling. Installation is straightforward on standard fixture plates; the mounting arrangement is designed to integrate into typical workshop setups, offering a low-complexity method to add a durable clamping point to existing jigs. Durable construction and operator protection Finished in a blackened surface treatment, the clamp resists wear and offers a low-maintenance protective layer suitable for workshop environments. The massive holding arm increases rigidity under lateral load, while the integrated safety lock secures the clamp in the closed position during handling or transport of fixtures. At a nominal weight of 0.43 kg, the device is easy to fit and replace, reducing downtime during tool changes. These construction choices combine to extend service life and reduce lifecycle interruptions. Practical advantages for workshops and small-scale production Designed for application in clamping technology, the unit is particularly valuable where compactness, repeatability and operator safety are priorities. Minimal maintenance is required thanks to robust mechanical components, and the simple lever action is compatible with manual operation and mechanised pick-and-place environments. The clamp’s straightforward design supports quick retrofitting to existing assemblies, making it a pragmatic choice for workshops seeking dependable, low-overhead clamping points. Contact Metav Werkzeuge for a tailored recommendation on incorporating the Kukamet vertical toggle clamp 213 into existing fixtures; Metav’s Emmerich team can advise on compatibility and supply directly from stock Technical data Article number: B213-3-D-L-C2 Model: 213 Manufacturer: Kukamet Facts Arm length: 111 mm Max clamping force: 2,000 N Max holding force: 2,500 N Weight: 0.43 kg eClass: 21041717 ETIM: EC011973 Special features Angle-base mounting Massive holding arm Safety locking mechanism Finish: blackened Material: blackened steel FAQ What applications is this clamp suited for? The vertical toggle clamp 213 by Kukamet is suitable for jigs, small assembly fixtures and repetitive production tasks where compact, secure clamping is required. How much force does the clamp deliver? Rated values show a clamping force of 2,000 N and a holding force of 2,500 N for the Kukamet 213 vertical toggle clamp (SKU B213-3-D-L-C2). Can the clamp be mounted on angled plates? Yes — the angle-base mounting provides flexible installation on vertical or angled fixture plates to save workspace and improve layout density. Is the clamp protected against workshop wear? The device features a blackened finish and a massive holding arm for enhanced durability in standard workshop environments. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
2000 N Vertical Clamp 117mm Arm, Massive Holding Arm With Safety Lock, 2500 N Hold Force - Kukamet
Take advantage of the combination of a massive holding arm, a safety lock and a compact 117 mm reach to secure workpieces reliably; order the clamp directly via Metav Werkzeuge or consult our specialists for application advice. 211 Vertical clamp by Kukamet — horizontal foot, 2,500 N holding force A 211 vertical clamp designed for secure, repeatable clamping in workshop fixtures and jigs, suited to general industrial and maintenance tasks. Massive holding arm with safety lock Horizontal foot for straightforward mounting 2,500 N holding force for secure clamping Compact 117 mm arm, weight 0.41 kg Heavy-duty clamping for reliable production The 211 delivers a clear technical advantage through its high holding force and robust construction. With a maximum holding force of 2,500 N and a clamping capability up to 2,000 N, this vertical lever clamp is engineered to keep components immobile during machining, assembly or inspection. The values are expressed as force ratings in newtons (N) to allow straightforward comparison with other fixtures. The robust mounting and precise lever geometry reduce the risk of part movement, improving process stability and reducing rework. This makes the clamp particularly useful where consistent, repeatable clamping is required to maintain production quality. Space-saving design that simplifies fixture layouts Compact dimensions and a horizontal foot enable straightforward integration into jigs and workbenches. The 117 mm arm reach provides a balance between accessibility and compactness, while the low weight (0.41 kg) minimises added mass on movable plates and reduces inertia in dynamic applications. The horizontal base allows the clamp to be mounted close to the workpiece, saving valuable space on the fixture plate and enabling denser tooling arrangements. For engineers planning fixture layouts, the compact form factor helps maintain clearances and supports modular jig design. Safe operation with secure locking and robust arm Safety and process assurance are addressed by the safety lock and a massive holding arm, which together prevent accidental opening under load. The locking mechanism is designed for positive engagement, improving operator confidence during handling and reducing the chance of unintended release. Such design elements contribute to safer shop-floor practice and fewer interruptions to workflow. Where operator safety and unattended machining are priorities, this clamp provides a dependable mechanical safeguard that complements procedural controls. Finish, maintenance and compatibility with workshop environments Finished in a blackened surface treatment, the clamp resists corrosion and presents a low-reflective appearance suited to industrial environments. The surface treatment protects the metal and simplifies cleaning; routine visual inspection and occasional lubrication of the pivot points are sufficient for long service life. Constructed for general workshop use, the clamp is compatible with common fixture plates and standard bolting patterns when mounted via the horizontal foot. Its straightforward mechanical design avoids complex servicing while delivering a dependable service life. For compact, robust clamping select the Kukamet 211 — contact Metav Werkzeuge for tailored application advice and reliable supply from Emmerich: info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: B211-3-D-L-C2 Manufacturer: Kukamet Facts Arm length: 117 mm Weight: 0.41 kg Maximum clamping force: 2,000 N Maximum holding force: 2,500 N Model designation: 211 Mounting style: horizontal foot Special features Massive holding arm Safety lock Finish: blackened (Schwarz brüniert) Suitable for workshop fixtures and jigs FAQ How much holding force does the 211 provide? The 211 vertical clamp provides a maximum holding force of 2,500 N to keep workpieces secure during machining and assembly operations. What is the maximum clamping force of this clamp? The clamp offers a maximum clamping force of 2,000 N, a specification that refers to the applied clamping load when the lever is engaged. Can the clamp be mounted on a fixture plate? Yes, the horizontal foot allows straightforward mounting to fixture plates and workbenches for jig and tooling setups using standard bolting patterns. What maintenance does the 211 require? Routine maintenance for the 211 includes visual inspection, occasional lubrication of pivot points and ensuring the safety lock engages cleanly; no specialised servicing is required. Is the 211 suitable for repetitive production use? Designed for workshop and fixture environments, the 211 is suitable for repetitive production tasks where reliable, repeatable clamping is required. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
2000 N Vertical Clamp With Massive Support Arm, Safety Lock, 117mm Reach - Kukamet
Take advantage of the combination of a massive holding arm, a secure safety lock and a compact 117 mm reach for reliable vertical clamping in small production and jig applications; order the Vertical clamp 212 directly via Metav Werkzeuge or consult our advisors if required Vertical clamp 212 — vertical clamp with 2,500 N holding force, 117 mm arm (Kukamet) The Vertical clamp 212 is a vertical clamping device designed for secure, repeatable holding in fixtures, jigs and assembly benches across workshops and light production environments Massive holding arm with safety lock 117 mm arm length for tight spaces 2,500 N maximum holding force Blackened finish for corrosion resistance Consistent, measurable clamping performance for production The device delivers a clear, technical advantage through its 2,000 N clamping force and 2,500 N holding force, values that describe different aspects of operation: the clamping force is the active force applied during closure, while the holding force indicates the resistance to opening under load. Those figures translate into reliable repeatability for batch work and make the component suitable for demanding fixture tasks where stability matters. The specification supports quicker set-ups and fewer re-clamps, contributing directly to process efficiency and reduced cycle time. Space-saving design with robust construction With an 117 mm arm length and a compact footprint, the clamp is intended for use where space is limited without sacrificing strength. The massive holding arm provides a high rigidity-to-weight ratio, and the overall mass of 0.37 kg combines portability with mechanical stability. The vertical foot mounting enables straightforward installation into plates or fixture blocks, while the blackened finish offers basic surface protection and a subdued appearance that resists workshop wear. This balance of small form factor and robust build supports versatile use in both repair shops and production jigs. Built-in safety and simple integration into workflows A dedicated safety lock secures the clamp in the closed position, reducing the risk of accidental release and improving operator confidence during assembly operations. The mechanism is suitable for repetitive manual clamping and can be integrated into semi-automated stations where a positive locked state is required. The mechanical design keeps maintenance needs low, and the solid construction minimises inspection intervals. Together, these properties provide practical peace of mind for workshop supervisors demanding dependable daily performance. For tailored advice or to secure supplies of the 212 vertical clamp from Kukamet, contact Metav Werkzeuge for an efficient and reliable procurement route Technical data Article number: B212-3-D-L-C2 Model: 212 Manufacturer: Kukamet Facts Arm length: 117 mm Weight: 0.37 kg Max clamping force: 2,000 N Max holding force: 2,500 N eClass: 21041717 ETIM: EC011973 Special features Massive holding arm Safety lock Vertical foot mounting Blackened finish Suitable for fixtures and jigs SKU: B212-3-D-L-C2 FAQ What maximum holding and clamping forces does the clamp offer? The Vertical clamp 212 provides a maximum clamping force of 2,000 N and a maximum holding force of 2,500 N, suitable for many small-scale production and fixture applications. Can this clamp be mounted on fixture plates or tooling blocks? Yes, the unit is designed for vertical foot mounting, making it straightforward to secure to plates or blocks used in jigs and fixtures. Is the arm suitable for confined spaces on assembly benches? The 117 mm arm length offers a compact reach that is particularly useful where space is limited while preserving clamping stability. What safety features are included? The clamp is equipped with a safety lock that fixes the arm in the closed position to prevent unintentional opening under load. What material and finish does the clamp have? The component is delivered with a blackened finish, providing basic corrosion resistance and a durable workshop surface. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
2000 N Vertical Clamp With Safety Lock, Angle Base M8x50 - Kukamet
Take advantage of a compact clamp that delivers a 2,500 N holding force, a 2,000 N pressing capacity and a secure safety locking feature for reliable fixture performance; Order the vertical clamp directly via Metav Werkzeuge or ask our consultants if needed. Vertical clamp 213 — vertical lever clamp with safety lock, 2,500 N holding force (Kukamet) The Vertical clamp 213 is a compact vertical lever clamp designed for secure workpiece retention on jigs and fixtures in metalworking and general workshop applications. Safety locking mechanism for secure clamping Holding force 2,500 N for robust retention Pressing capacity 2,000 N for consistent action Angle base for stable mounting and simple integration Reliable clamping performance that keeps production running The compact vertical lever clamp combines a high holding force with controlled pressing capacity, offering repeatable clamping cycles for jig-based manufacturing. The specification of 2,500 N holding force and 2,000 N pressing capacity translates into dependable retention during machining and assembly operations, reducing rework and inspection time. Where force balance matters, the distinction between holding and pressing capacities ensures that the clamp applies a stable load while absorbing dynamic process forces, preserving component geometry and tooling life. The unit’s lever-style actuation provides a quick, mechanical advantage for fast cycle times without complex pneumatics. Secure operation and straightforward integration into fixtures Designed for uncomplicated mounting, the clamp features an angle base that allows a low-profile attachment to plates and tooling blocks, and an M8x50 spindle for adjustable contact with workpieces. The integrated safety lock prevents disengagement under vibration and during incidental impacts, enhancing operator confidence and process safety. A compact 0.47 kg body minimises added mass on fixtures while maintaining structural stiffness, and the lever mechanism permits rapid manual or fixture-actuated clamping sequences. The combination of a small footprint and standard spindle thread supports retrofitting into existing jig layouts with minimal modification. Durable finish and dependable service life for workshop environments Surface treatment in a blackened finish protects the clamp against wear and offers good corrosion resistance in standard workshop atmospheres. The device’s mechanical simplicity means fewer wear-prone components and straightforward replacement of the contact spindle when required. As a lever-style clamping device from Kukamet, it delivers a balance of robust function and low maintenance demands that suits high-mix, repetitive production as well as smaller workshop setups where space and reliability are priorities. The clamp’s proven concept supports long-term fixture stability and predictable process outcomes. For secure, compact clamping solutions order the Kukamet Vertical clamp 213 through Metav Werkzeuge or consult our specialists at Metav Werkzeuge for application advice and fixture recommendations Technical data Article number: B213-3-L GTIN: 8680731507997 SKU: B213-3-L Facts Weight: 0.47 kg Pressing capacity (max): 2,000 N Holding force (max): 2,500 N Spindle thread and length: M8x50 Category: Spanner / clamp Special features Blackened finish With safety locking Angle base (Winkelfuß) Lever-style vertical clamp FAQ What forces can the clamp handle? The Vertical clamp 213 from Kukamet provides a maximum holding force of 2,500 N and a pressing capacity of 2,000 N, suitable for many machining and assembly fixtures. How is the clamp mounted to a fixture? Mounting is via the angle base; the clamp’s design permits secure attachment to tooling plates and blocks using the base fixing points for stable integration. What spindle specification does the clamp use? The clamp uses an M8x50 contact spindle, allowing adjustable contact length and straightforward replacement when required. Does the clamp include a safety feature to prevent accidental release? Yes, the clamp is supplied with an integrated safety locking mechanism that secures the lever position under vibration and incidental loads. Is the clamp suitable for compact jig designs? Its compact construction and 0.47 kg mass make the clamp well suited to space-constrained jigs while preserving clamping performance. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
2000 N Vertical Mount Toggle Clamp With Hook, Stainless Steel, 1500 N Thrust, 45 mm Thread Length - Kukamet
Robust, corrosion‑resistant stainless steel construction combined with a vertical-foot mounting ensures dependable clamping with a rated 1500 N closing force and 2000 N holding capacity; ideal for repeatable fixtures and jigs. Order the latch clamp 312 directly via Metav Werkzeuge or ask our consultants if needed. Latch clamp 312 (S312-2) — Kukamet stainless steel vertical-foot latch clamp, 1500 N clamping The Latch clamp 312 is a compact lever-actuated latch clamp designed for secure fastening in fixtures, jigs and assembly stations where a low-profile, corrosion‑resistant solution is required Stainless steel construction Vertical-foot mounting 1500 N clamping force Hook latch with 2000 N holding Secure clamping that reduces rework and downtime The lever-actuated closure delivers a clearly defined 1500 N closing force, resulting in consistent part retention and reduced variability during machining or assembly. Consistent clamping force minimises slippage and the need for rework, supporting higher first-pass yield. The presence of a hook latch increases resistance to vibration, so setups remain stable through cycle changes and handling. Corrosion resistance for long service life in production Constructed from stainless steel, the device resists corrosion in humid or coolant‑exposed environments and therefore maintains dimensional reliability over time. The material choice reduces surface maintenance and replacement frequency, supporting predictable spare-part planning and lower total cost of ownership for the workshop. Compact mounting and straightforward integration The clamp features a vertical foot mounting arrangement that eases placement on flat fixture plates and tooling blocks. With a threaded engagement length of 45 mm and a net weight of 0.175 kg, the unit suits compact jigs and can be secured quickly without large mounting footprint, enabling efficient workstation layout and faster changeovers. Practical design focused on production efficiency A dedicated hook provides a positive lock and a rated 2000 N holding capacity for static retention once engaged. The compact lever profile and smooth operating geometry support repeatable manual actuation, making it suitable for assembly lines and bespoke fixturing where quick, reliable closures are required. The part is supplied as SKU S312-2 for straightforward ordering and inventory tracking. For supply, technical clarification or to discuss compatibility with existing fixtures, contact Metav Werkzeuge GmbH in Emmerich—phone +49 2822 7131930 or eMail info@metav-werkzeuge.com—to secure Kukamet latch clamps for the next production run Technical data Article number: S312-2 GTIN: 8680731506686 Brand: Kukamet Core figures Clamping force: 1500 N Holding force: 2000 N Thread length: 45 mm Weight: 0.175 kg Features & materials Material: stainless steel Mounting: vertical foot With hook: yes Special feature: none FAQ What is the rated clamping force of this latch clamp? The latch clamp provides a rated clamping force of 1500 N, ensuring reliable retention for typical fixture and jig applications. Is the clamp suitable for use in humid or coolant environments? Yes. The stainless steel construction of the Kukamet latch clamp resists corrosion and is suitable for environments where moisture or coolant exposure occurs. How is the clamp mounted to a fixture plate? Mounting is via a vertical foot arrangement with a threaded engagement length of 45 mm, allowing secure attachment to flat plates or tooling blocks. What holding capacity does the hook latch provide? The hook delivers a holding capacity of 2000 N when engaged, offering positive retention against vibration and handling. Which SKU should be ordered for this model? Order using SKU S312-2 for this Kukamet latch clamp. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
20000N Horizontal Base Clamp With Hook, 65mm Thread Length, 25kN Holding Force - Kukamet
Take advantage of the combination of robust holding force, stable horizontal-foot mounting and a cast, blackened body for dependable fixture performance — order the toggle latch clamp directly via Metav Werkzeuge or consult our specialists if needed. 341-5 Toggle Latch Clamp (Kukamet) — horizontal foot, 25 kN holding force The 341-5 Toggle Latch Clamp is a heavy-duty latch clamp for industrial fixturing and assembly, engineered for horizontal-foot mounting and dependable retention in repetitive clamping operations. Heavy-duty holding force 25,000 N Horizontal foot for stable mounting Cast body with blackened finish Integrated hook for secure engagement Secure clamping where repeatability matters The clamp delivers a holding force of 25,000 N, providing secure retention for production jigs and assembly fixtures. This level of force translates into reliable fixation under dynamic loads and reduces the risk of movement during machining or assembly steps. The specified pressing force of 20,000 N supports strong engagement of the latch mechanism, so setups remain constant from one cycle to the next. For workshops and production lines seeking measurable performance improvements, the clamp’s force ratings offer a quantifiable basis for fixture design and process planning. Robust construction designed for long service life Constructed with a cast body and a blackened finish, the design prioritises mechanical strength and surface protection against everyday wear. The substantial mass of the unit (approximately 2.235 kg) contributes to dimensional stability when mounted, while the horizontal-foot mounting ensures a low profile and secure attachment to fixture plates. A 65 mm thread length allows fine adjustment of the engagement point, and the integrated hook provides positive latching without additional hardware. These features together reduce maintenance intervals and support consistent operation in industrial environments. Fast, ergonomic operation for efficient workflows As a lever-type latch clamp, the mechanism enables quick manual actuation for rapid clamping and unclamping. The toggle action delivers a stable locked state that resists vibration and accidental release, which is beneficial in both machining and assembly contexts. The simple mechanical design minimises downtime and simplifies replacement planning in supply chains. For production teams focused on process efficiency, the clamp offers straightforward integration into existing fixtures and jigs, helping to shorten cycle times and increase throughput. For robust, workshop-ready clamping from Kukamet, order the 341-5 through Metav Werkzeuge — contact our Emmerich team on +49 2822 7131930 or info@metav-werkzeuge.com to confirm suitability for specific fixtures and applications Technical Data Article: Verschlussspanner 341 SKU: 341-5 GTIN: 8680731504743 Facts Weight: 2.235 kg Holding force: 25,000 N Pressing force: 20,000 N Thread length: 65 mm eClass: 21041718 ETIM: EC011973 Special features Cast body with blackened finish Horizontal foot mounting Integrated hook for engagement No additional special features listed FAQ What maximum holding force does this clamp provide? The 341-5 Toggle Latch Clamp from Kukamet provides a maximum holding force of 25,000 N, suitable for demanding fixture retention tasks. Is the clamp suitable for horizontal mounting on fixture plates? Yes, the clamp is designed with a horizontal foot for stable mounting, making the 341-5 appropriate for low-profile fixture installations. What material and finish does the clamp have? The unit features a cast body with a blackened finish, delivering mechanical strength and a degree of surface protection for industrial use. Can the engagement point be adjusted? Adjustment is possible via the 65 mm thread length, which allows fine tuning of the engagement position to suit different fixture geometries. Which applications are typical for this type of latch clamp? The toggle latch clamp is intended for industrial fixturing, assembly jigs and repetitive clamping operations where repeatability and secure retention are required. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
2000N Horizontal Combination Clamp, Zinc Plated, 0.79kg - Kukamet
Take advantage of the combination of robust 2,000 N clamping force, a corrosion-resistant zinc-plated finish and compact design for reliable, repeatable fixture work; order directly via Metav Werkzeuge or consult the specialists for specification support. Kombispanner 711 — Horizontal-foot lever clamp with 2,000 N holding force by Kukamet A Kombispanner 711 provides a heavy-duty toggle action for securing workpieces in jigs and fixtures, mounted via a horizontal foot for stable bench or plate installation. 2,000 N clamping force Horizontal-foot mounting Zinc-plated corrosion resistance Compact weight 0.79 kg Consistent clamping where process stability matters The clamp delivers a defined holding force of 2,000 N, generated by a stable toggle mechanism that converts lever movement into secure retention. This mechanical principle ensures repeatable clamping with minimal adjustment, which is particularly valuable for short-cycle production and quality-controlled assembly. The compact construction keeps inertia low while providing reliable pressure, reducing the need for frequent re‑setting and limiting downtime in fixtures and jigs. Simple integration into existing fixtures and jigs Fitted with a horizontal foot mounting, the unit can be fastened directly to plates or benches without additional adapters. The mounting orientation is suited to applications where the clamping arm is required to pivot parallel to the base, enabling unobstructed access above the workpiece. In practice, this means easier alignment during set-up, fewer interferences with tooling and a cleaner workflow for batch processes that demand consistent part orientation. Durable finish for workshop environments Constructed with a zinc-plated surface, the clamp resists corrosion and everyday wear in workshop conditions. The protective coating extends service life and reduces maintenance frequency, so the fixture remains precise without constant upkeep. Galvanic protection combined with solid mechanical design supports long-term dimensional stability, which is essential when fixtures are relied upon for repeated measurement or machining operations. Compact design that supports flexible use At just 0.79 kg, the clamp is light enough for mobile fixtures yet robust enough for fixed assembly stations. The lever-operated principle provides quick actuation and positive locking, supporting fast throughput in repetitive tasks. For operations that balance space constraints with the need for firm retention, this type of toggle clamp offers an economical, space-saving solution that integrates into both manual and semi-automated processes. Contact Metav Werkzeuge for advice on integrating the Kukamet Kombispanner 711 into fixtures and to secure a reliable clamping solution tailored to production needs Technical Data Article number: 711-2 GTIN: 8680731504309 Brand: Kukamet Facts Holding / clamping force: 2,000 N Weight: 0.79 kg ECLASS: 21041716 ETIM: EC011973 Materials & Features Material: zinc-plated Mounting: horizontal foot Type: lever / toggle clamp FAQ What clamping force does the clamp provide? The clamp provides a rated holding force of 2,000 N; the Kukamet Kombispanner 711 is specified for consistent retention in jigs and fixtures. How is the clamp mounted to a fixture plate? Mounting is via a horizontal foot; the design allows screws or bolts to fasten the base plate directly to jig or bench surfaces for stable installation. Is the finish suitable for humid workshop conditions? Yes. The zinc-plated surface on the Kukamet 711 offers corrosion resistance suited to typical workshop environments, reducing maintenance needs. Can the clamp be used for serial production set-ups? The repeatable toggle action and defined holding force make this clamp suitable for short-cycle production and repeated assembly tasks where consistent clamping is required. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
2000N Pneumatic Clamp 90° Vertical Base Zinc Plated, 2500N Holding Force - Kukamet
Take advantage of the clamp’s combination of reliable pneumatic actuation, galvanised durability and compact weight to maintain steady production flow. Benefit from a right‑angle mounting design with a 2,000 N actuation capacity and a 2,500 N holding force for secure fixturing; order directly via Metav Werkzeuge or ask the consultants for application advice. Kukamet Pneumatic Clamp 652 — Vertical‑foot clamp with 2,000 N actuation The 652 Pneumatic Clamp is a vertical‑foot, right‑angle pneumatic clamping solution intended for industrial and workshop fixture applications. Vertical foot for rigid right‑angle mounting Max. actuation force 2,000 N Holding force up to 2,500 N Galvanised steel for corrosion resistance Consistent force for reproducible clamping Engineered for repeatable operation, the 652 Pneumatic Clamp delivers a controlled actuation of 2,000 N, enabling consistent part retention in production cycles. Pneumatic actuation translates compressed‑air energy into linear clamping motion, which reduces operator variability and speeds up cycle times compared with manual toggles. The specified 2,500 N holding capacity indicates the maximum static retention the device can sustain once engaged; this separation of actuation versus holding values helps in selecting the clamp for assemblies that require brief high forces to engage and sustained clamping during machining or inspection. Robust construction for workshop conditions Constructed from galvanised steel and weighing 0.91 kg, the clamp balances durability with low mass to simplify integration into multi‑station fixtures. The corrosion‑resistant finish extends service life in mixed workshop environments, while the compact design minimises inertia on moving fixtures. The vertical‑foot mounting provides a stable base for right‑angle clamping arrangements, reducing torsional stress on the clamped component. Where frequent part changes occur, the lightweight assembly helps maintain agility without compromising structural integrity. Practical installation and operational advantages Mounting via a vertical foot at a 90° angle allows straightforward installation on fixture plates and sub‑assemblies, supporting modular fixturing concepts. The clamp’s mechanical simplicity lowers maintenance demand: periodic checks of pneumatic supply and pivot lubrication ensure reliable performance. The compact footprint is suited for dense fixture layouts, freeing space for tooling or sensors. Specifying the clamp by SKU 652‑3 and confirming the galvanised finish supports procurement clarity and compatibility checks for production planners. Contact Metav Werkzeuge to discuss fitment and delivery of Kukamet clamps or request technical assistance via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data SKU: 652-3 GTIN: 8680731505252 Category: Spanner Article name: Pneumatic clamp Facts Max. actuation force: 2,000 N Max. holding force: 2,500 N Weight: 0.91 kg Angle: 90° ECLASS: 21021004 ETIM: EC011973 Special features Material: galvanised steel Mounting: vertical foot Arm: not applicable Particular feature: none FAQ What clamping and holding forces does the clamp provide? The 652 pneumatic clamp offers an actuation force of 2,000 N and a holding force of up to 2,500 N, specified for engagement and static retention respectively. Is the clamp suitable for wet or corrosive workshop environments? Yes, the galvanised finish on the Kukamet clamp provides enhanced corrosion resistance suitable for mixed workshop conditions. How is the clamp mounted to a fixture plate? Mounting is by a vertical foot designed for rigid right‑angle installation, enabling straightforward attachment to fixture plates and sub‑assemblies. What weight and footprint considerations apply for fixture design? The clamp weighs 0.91 kg and has a compact footprint, making it suitable for dense fixture layouts where minimising mass is beneficial. Can the clamp be used in automated pick‑and‑place or CNC machining fixtures? The pneumatic actuation and robust holding capacity make the clamp appropriate for automated fixtures and machining operations where reliable, repeatable clamping is required. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
2000N Vertical Clamp 111mm Arm, Massive Holding Arm With Safety Lock, Galvanised - Kukamet
Combining a galvanised finish, a 111 mm heavy-duty arm and a 2000 N clamping rating, the Kukamet Vertical Clamp 213 provides dependable clamping with rapid engagement for everyday workshop tasks. For reliable supply and technical guidance, order the vertical clamp directly via Metav Werkzeuge or consult the technical team for application advice. Vertical Clamp 213 — Kukamet vertical clamp with 2000 N clamping and 111 mm arm The Vertical Clamp 213 is a compact vertical clamping device intended for fixture and holding tasks in metalworking and assembly applications, fitted with an angle-foot mount for secure attachment. 2000 N clamping force 2,500 N holding capacity Galvanised corrosion-resistant finish 111 mm sturdy holding arm Consistent clamping performance for production workflows A stable clamping force is essential for repeatable machining and assembly. The vertical clamp delivers a defined 2000 N clamping output with a maximum holding capacity of 2,500 N, ensuring blanks and components remain stationary during operations where vibration or side loads occur. The distinction between clamping and holding capacities improves process predictability: the clamping value denotes the active force applied during engagement, while the higher holding figure indicates the part-retention capability under external loads. This behaviour supports reliable cycle times and reduced rework in batch production. Built for durability and secure handling in workshops Robustness and operator safety were prioritised in the design. A galvanised surface treatment provides corrosion resistance for prolonged use in workshop environments, while the heavy-duty arm construction resists deformation under load. Integral to safe operation is the safety lock, which prevents unintended release once the clamp is engaged; the mechanical lock is suited to repetitive use where accidental opening would risk part damage or interruption. The combination of durable materials and locking function reduces maintenance intervals and contributes to a safer workplace. Compact mounting and flexible integration for fixtures Space-conscious fixture design benefits from a compact actuator with an angle foot mounting option and a 111 mm reach. The small mass (approx. 0.43 kg) facilitates positioning in confined jigs or on moving subplates without significantly increasing inertia. The design enables easy integration into multi-clamp arrays and automated stations where low-profile clamping points are required. Where precise positioning is needed, the rigid support arm and consistent engagement mechanics aid in maintaining datum repeatability between cycles. Choose procurement via Metav Werkzeuge for assured availability and expert application advice on the Kukamet Vertical Clamp 213 — contact Metav Werkzeuge in Emmerich for product matching and delivery coordination Technical Data Article number: 213-3-D-L-C2 GTIN: 8680731501995 Weight: 0.43 kg Material: Galvanised Mounting: Angle foot Facts Clamping force (max): 2000 N Holding capacity (max): 2,500 N Arm length: 111 mm SKU: 213-3-D-L-C2 eClass: 21041717 ETIM: EC011973 Special features Massive holding arm Safety lock Compact vertical clamping design Suitable for fixture and assembly tasks FAQ What clamping and holding values does the Vertical Clamp 213 provide? The Vertical Clamp 213 offers a maximum clamping force of 2000 N and a holding capacity of 2,500 N, suitable for stationary retention and light-to-moderate machining loads. How is the clamp mounted to a fixture? Mounting is via an angle foot, which allows secure attachment to plates or jig bases while keeping the clamp profile compact. Is the surface treatment suitable for workshop conditions? The unit is galvanised to resist corrosion in standard workshop environments, prolonging service life and reducing upkeep. What safety provisions are included in the clamp design? A mechanical safety lock is incorporated to prevent unintentional release after engagement, enhancing operator safety and process reliability. What applications suit this clamping device? The clamp is intended for fixture, assembly and light machining operations where a compact vertical clamping point with repeatable force and secure locking is required. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
2000N Vertical Clamp 117mm Arm, Horizontal Base, Solid Holding Arm & Safety Lock, Galvanised - Kukamet
Take advantage of a compact clamp that combines robust holding force, corrosion-resistant construction and straightforward mounting for reliable fixture performance; order supply or consult Metav Werkzeuge for application-specific advice and availability. 211 Vertical Clamp by Kukamet — massive holding arm, safety locking 211 Vertical Clamp designed for secure clamping in fixtures and jigs where a horizontal base is required Massive holding arm with safety lock Horizontal base for secure mounting 117 mm arm length for extended reach 2,500 N maximum holding force Engineered for dependable clamping and continuous production The 211 vertical clamp provides a compact solution where consistent clamping force and safety are priorities. With a maximum holding force of 2,500 N and a maximum pressing force of 2,000 N, the unit is suited to repetitive fixture operations and short-cycle production tasks that demand repeatable restraint. The massive holding arm and integrated safety locking reduce the risk of accidental release during machining or assembly, supporting a safer workplace and fewer interruptions in the production flow. Easy mounting and clear technical advantages Designed with a horizontal base for straightforward attachment to jigs, plates or tooling blocks, the clamp’s 117 mm arm length gives useful reach while keeping the footprint small. The body is galvanised to resist corrosion in typical workshop environments, and at only 0.41 kg the component is convenient to position and replace in modular fixtures. The distinction between pressing force and holding force is relevant: pressing force refers to the active clamping movement, while holding force indicates the sustained resistance once the clamp is engaged — both parameters aid correct selection for the task at hand. Low maintenance, trusted supply and workshop fit Durable construction and a simple mechanical locking concept mean minimal upkeep and long service intervals, which translates into lower downtime and predictable maintenance planning. The clamp’s compact design supports integration into manual and semi-automated setups where space and reliability matter. Supply and product expertise are available from Metav Werkzeuge, whose logistics and quality filtering for the European market aim to make precision components accessible to workshops and industry alike — a further assurance of dependable supply and after-sales continuity. Contact Metav Werkzeuge in Emmerich for application guidance or to secure delivery of Kukamet vertical clamps — eMail: info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: 211-3-D-L-C2 GTIN: 8680731501261 Weight: 0.41 kg Facts Arm length: 117 mm Maximum holding force: 2,500 N Maximum pressing force: 2,000 N Mounting type: horizontal base Special features Material: galvanised Massive holding arm Safety locking FAQ What holding and pressing forces does the clamp provide? The Kukamet 211 vertical clamp offers a maximum holding force of 2,500 N and a maximum pressing force of 2,000 N. How is the clamp mounted? Mounting is via a horizontal base, intended for secure attachment to jigs, fixture plates or tooling blocks. What is the effective arm reach of the device? The arm length is 117 mm, giving extended reach for many clamping situations. Is the clamp protected against corrosion? The component is galvanised, providing surface protection suited to standard workshop environments. Does the clamp include a safety mechanism to prevent accidental release? Yes, the design features a massive holding arm combined with a safety locking mechanism for secure retention. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
2000N Vertical Clamp 167mm Arm With Horizontal Base, Massive Holding Arm & Safety Lock - Kukamet
Combine robust 2,500 N holding force, zinc‑plated corrosion protection and a compact 167 mm arm for reliable, repeatable clamping. Order the unit directly via Metav Werkzeuge or consult our specialists if technical advice is needed. Vertikalspanner 211 vertical clamp — zinc‑plated, horizontal foot (Kukamet) Vertikalspanner 211 is a compact vertical clamping device for secure fixture and jig applications in workshops and light industrial environments. Solid support arm with safety lock Zinc‑plated corrosion protection Max holding force 2,500 N Horizontal foot for stable mounting Dependable clamping for repeatable production The vertical clamp offers a measurable performance advantage through its max holding force of 2,500 N and a max pressing force of 2,000 N, ensuring workpieces remain secure during machining or assembly. The rigid 167 mm arm transmits force with minimal flex, which reduces repositioning and rework. For purchasers seeking predictable throughput, these numeric values translate directly into fewer stoppages and a steadier production flow. The compact design also helps to economise bench space without compromising on mechanical integrity. Safer operation with a massive arm and lock A massive support arm combined with a safety locking mechanism reduces the risk of unintentional release during operations that involve vibration or dynamic loads. The lock provides a positive engagement that keeps the clamp closed under load, improving operator confidence and process safety. The lever action is designed for quick actuation and consistent clamping force, which supports faster cycle times while maintaining a secure hold. Low maintenance finish that prolongs service life The zinc‑plated surface finish offers corrosion resistance suitable for ordinary workshop atmospheres and reduces the need for frequent surface treatments. The light overall weight (0.41 kg) and compact footprint make the clamp easy to install and replace when required. Routine upkeep is straightforward: periodic lubrication of the pivot and inspection of the locking mechanism keeps performance within specification and minimises downtime. Practical mounting and application benefits Equipped with a horizontal foot for stable attachment, the clamp mounts securely to flat fixtures, plates or tooling bars. The design is optimised for fixture builders and maintenance technicians who require a durable, easy‑to‑integrate component for jigs and fixtures. The combination of clear technical data and a familiar mechanical principle simplifies specification and reduces the time from ordering to implementation. Contact Metav Werkzeuge for delivery and technical guidance on the Kukamet Vertikalspanner 211 with its 2,500 N holding force and zinc‑plated finish; advice and shipment are provided directly from Metav Werkzeuge in Emmerich. Technical Data SKU: 211-3-D-L-C3 GTIN: 8680731501278 Weight: 0.41 kg Material: Zinc‑plated Core technical data Arm length: 167 mm Mounting: Horizontal foot Max pressing force: 2,000 N Max holding force: 2,500 N eClass: 21041717 ETIM: EC011973 Special features Massive support arm Safety locking mechanism Corrosion‑resistant finish Category: Clamp (Spanner) FAQ Is the clamping force sufficient for machining operations? The Kukamet Vertikalspanner 211 is specified with a max holding force of 2,500 N and a max pressing force of 2,000 N, providing adequate clamping for many machining and assembly tasks that require secure workpiece retention. How is the clamp mounted on fixtures? The clamp uses a horizontal foot for stable mounting to flat plates or tooling bars; the design facilitates quick installation in jigs and fixture assemblies. Does the finish require special maintenance? The zinc‑plated finish on the Vertikalspanner 211 offers corrosion resistance; routine lubrication of moving parts and periodic checks of the safety lock are recommended to maintain long service life. What are the physical dimensions and weight? The device has a 167 mm arm length and a total weight of 0.41 kg, making it compact and easy to integrate into existing fixtures. Can the clamp be used in high‑vibration environments? The massive support arm and integrated safety locking mechanism are intended to reduce the risk of accidental release under vibration, making the clamp suitable for many shop‑floor situations. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
2000N Vertical Clamp 167mm Arm, Massive Hold Arm, 2500N Holding Force, Zinc Plated - Kukamet
Benefit from robust clamping performance and corrosion-resistant construction: the galvanised vertical toggle clamp 211 pairs a massive holding arm with a 167 mm reach and up to 2,000 N clamping force, delivering secure fixation and long service life in production fixtures. Order the clamp directly via Metav Werkzeuge or consult our specialists for application advice. Vertical toggle clamp 211 — galvanised, horizontal foot (Kukamet) A Vertical toggle clamp 211 designed for secure vertical clamping in jigs and fixtures, featuring a horizontal mounting foot for stable installation. Massive holding arm for secure clamping Galvanised finish for corrosion resistance Horizontal base for stable mounting Up to 2,000 N clamping force Reliable clamping that reduces cycle-time risks The vertical toggle clamp delivers consistent, repeatable clamping through its toggle action, translating operator movement into a secure hold with a maximum clamping force of 2,000 N and a peak holding capability of 2,500 N. For production environments this means fewer rework cycles and reduced downtime: the stable clamping force supports machining, assembly and inspection operations where workpiece movement must be avoided. The robust design also minimises the need for frequent adjustments, helping to keep cycle times predictable and throughput steady. Built for durability and low-maintenance service Manufactured with a galvanised surface and a massive holding arm, the clamp resists corrosion and mechanical wear in workshop conditions. The compact mass of 0.45 kg keeps the unit lightweight for easy integration while the solid arm construction provides rigidity under load. These characteristics translate into lower maintenance demands and longer intervals between replacements, supporting a dependable production flow and reducing the total cost of ownership for workshop tooling. Easy integration into fixtures and jigs With a horizontal mounting foot and a reach of 167 mm, the clamp is straightforward to fit into modular fixtures or bespoke jigs. Its toggle-clamp geometry offers fast engagement and release, improving operator ergonomics and enabling quicker workpiece changeovers. The compact footprint and standardised attachment points make it suitable for retrofitting existing setups or specifying in new fixture designs, helping engineers to maintain consistent clamping points across multiple stations. Choose the Kukamet vertical toggle clamp 211 via Metav Werkzeuge for dependable, low-maintenance clamping — contact our technical team at info@metav-werkzeuge.com or call +49 2822 7131930 for tailored application advice Technical data Article number: 211-3-D-C3 GTIN: 8680731501247 Manufacturer: Kukamet ECLASS: 21041717 ETIM: EC011973 Facts Arm length: 167 mm Max clamping force: 2,000 N Max holding force: 2,500 N Weight: 0.45 kg Special features Galvanised finish Horizontal mounting foot Massive holding arm Toggle-clamp action FAQ What clamping force can be expected from this clamp? The clamp offers a maximum clamping force of 2,000 N and a maximum holding capability of 2,500 N, making the Vertical toggle clamp 211 suitable for medium-duty fixtures and assembly tasks. Is the clamp suitable for use in a humid or corrosive workshop environment? Yes, the galvanised finish on the Vertical toggle clamp 211 provides corrosion resistance that helps protect the component under humid shop conditions. How is the clamp mounted into a fixture? The clamp uses a horizontal mounting foot for stable attachment; the 167 mm arm reach allows alignment with common fixture geometries. Can this clamp be used for repetitive production operations? The robust arm construction and toggle action are designed for frequent cycles, offering repeatable clamping with low maintenance demands for production use. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
2000N Vertical Clamp Wafer Base Horizontal Foot Zinc-Plated, 2500N Holding Force - Kukamet
Robust clamping with a maximum clamping force of 2,000 N and a holding force of 2,500 N, combined with a galvanised finish and horizontal base for straightforward mounting. Order the 211 directly via Metav Werkzeuge or consult our specialists for integration and application advice. 211 Vertical toggle clamp – horizontal base, 2,000 N clamping force (Kukamet) The 211 vertical toggle clamp is designed for secure, repeatable workholding in jigs and fixtures where compact, reliable clamping is required. Clamping force 2,000 N Holding force 2,500 N Galvanised steel finish Horizontal base mounting Consistent force for secure machining The clamp delivers a defined clamping force of 2,000 N and a higher holding force of 2,500 N, ensuring workpieces remain stationary under load. The distinction between clamping and holding force is important: clamping force describes the active pressure during closure, while holding force indicates the retention capability once the toggle is locked. This mechanical certainty reduces component movement during drilling, milling or assembly operations and lowers the risk of rework. The design supports repeatable positioning in production jigs, making process outcomes predictable and measurable. Durable finish and compact design for workshop use Galvanised construction provides corrosion resistance for workshop environments and extends service life where exposure to coolant or humid conditions occurs. At only 0.415 kg, the unit is compact yet robust, allowing installation in confined fixtures without adding unnecessary bulk. The horizontal base mounting simplifies integration into plates and tooling while the M8x50 pressure spindle enables fine adjustment of contact pressure and compensation for part tolerances. The absence of an articulated arm reduces snagging risks and keeps the profile low for close-packed tooling layouts. Fast action, simple maintenance and system benefits The lever-style toggle mechanism offers quick, tactile actuation for efficient cycle times: close to clamp, move the part, release to open. The simple mechanical construction requires minimal upkeep; occasional lubrication and a visual check of the fastenings are typically sufficient to keep the unit in service. The clamp supports standard workshop practices and can be incorporated into manual or semi-automated fixtures. Supplied under the Kukamet designation and distributed via Metav, the product benefits from centralised quality oversight in Emmerich, which contributes to reliable availability and consistent specification compliance. For a tailored recommendation on integrating the Kukamet 211 into fixtures or assemblies, contact Metav Werkzeuge in Emmerich for procurement or technical advice at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: 211-3 GTIN: 8680731501216 Manufacturer: Kukamet Facts Clamping force: 2,000 N Holding force: 2,500 N Weight: 0.415 kg Pressure spindle: M8x50 eClass: 21041717 ETIM: EC011973 Special features Material: Galvanised Mounting: Horizontal base Arm: Not applicable Special feature: None Category: Spanner Story trigger: lever clamp FAQ How much clamping force does the 211 provide? The 211 vertical toggle clamp provides a clamping force of 2,000 N and a holding force of 2,500 N for secure retention in jigs and fixtures. Is the spindle adjustable for different part heights? Yes, the M8x50 pressure spindle allows height and pressure adjustment to accommodate varying workpiece tolerances. What mounting method is required for installation? The unit is designed for horizontal base mounting; fastenings should match the base plate configuration to ensure stable fixation. What environment is the clamp suitable for? The galvanised finish suits typical workshop conditions, offering corrosion resistance for damp or coolant-exposed areas. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
2000N Vertical Clamp With 67mm Arm, Horizontal Base, Massive Holding Arm & Safety Lock - Kukamet
Take advantage of a robust clamping solution that combines a massive holding arm, a secure safety lock and compact design for consistent workpiece retention. The vertical clamp delivers up to 2,500 N holding force and 2,000 N clamping force for dependable fixture performance. Order the unit directly via Metav Werkzeuge or consult the technical advisers for integration support. Vertikalspanner 211 – Vertical toggle clamp with massive arm and safety lock (Kukamet) The Vertikalspanner 211 is a vertical clamp designed for stable workpiece retention in jigs and fixtures, featuring a horizontal base foot for secure mounting and a compact 67 mm arm for close-edge clamping. Vertikalspanner »211« by Kukamet Massive holding arm with safety lock Holding force 2,500 N, clamping force 2,000 N Horizontal base foot, arm 67 mm Reliable force for repeatable positioning The clamp offers a high holding force of 2,500 N and a clamping force of 2,000 N, values that translate directly into reduced movement during machining and assembly. In practice, this means fewer micro-adjustments and less rework when securing parts in fixtures or on assembly jigs. The short reach afforded by the 67 mm arm enables clamping close to edges, improving access for machining operations while maintaining consistent pressure across cycles. Designed for safe, long-term use A massive arm construction, combined with an integrated safety lock, ensures the mechanism remains stable under repeated use and prevents accidental release during handling. The component’s blackened finish provides a uniform surface that reduces light reflection in inspection areas and contributes to everyday durability. At 0.41 kg, the unit is light enough for straightforward positioning yet solid enough to withstand workshop demands, simplifying fixture assembly and maintenance routines. Easy integration and versatile application Thanks to the horizontal base foot mounting, the clamp can be fitted into existing fixture plates or custom jigs without extensive modification. The toggle-style lever design makes it suitable for repetitive clamping tasks in welding, assembly and light machining environments. The model is supplied as Vertikalspanner 211 (SKU B211-3-D-L-C1) by Kukamet, offering a compact footprint that supports efficient workflow layouts and quick setup changes on the shop floor. For secure, repeatable clamping in demanding fixtures, contact Metav Werkzeuge to arrange supply of the Kukamet Vertikalspanner 211 or to request detailed integration advice at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: B211-3-D-L-C1 Manufacturer: Kukamet Designation: Vertikalspanner 211 Weight: 0.41 kg Material finish: blackened (blued) Facts Arm length: 67 mm Clamping force (max): 2,000 N Holding force (max): 2,500 N Special features Massive holding arm Safety lock Horizontal base foot mounting Toggle (lever) clamp design FAQ What clamping and holding forces does the clamp provide? The Vertikalspanner 211 provides a clamping force of up to 2,000 N and a holding force of up to 2,500 N, suitable for reliable retention in many fixture applications. Can the clamp be mounted to standard fixture plates? Yes, the clamp uses a horizontal base foot for mounting, allowing straightforward attachment to standard plates and custom jigs. Is the clamp suitable for close-edge clamping? The 67 mm arm length and compact toggle design make this clamp suitable for close-edge applications where access and space are limited. What safety features are incorporated? The clamp includes an integrated safety lock that prevents unintentional release, enhancing user safety during handling and processing. Who manufactures the product and what is the SKU? The product is manufactured by Kukamet and supplied under SKU B211-3-D-L-C1 as the Vertikalspanner 211. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
2000N Vertical Clamp With 67mm Arm, Massive Holding Arm And Safety Lock - Kukamet
Benefit from a compact, galvanised vertical clamp that pairs a 2,500 N holding force with a 67 mm arm for secure, repeatable workholding; its massive holding arm and safety lock provide reliable operator protection while keeping fixtures compact. Order or request advice directly from Metav Werkzeuge for fast, dependable supply. Vertical clamp 212 — Galvanised vertical‑mount toggle clamp, 2,500 N holding force (Kukamet) The Vertical clamp 212 is a vertical‑foot mounted toggle clamp engineered for secure clamping in metalworking, assembly jigs and general workshop fixtures. Galvanised corrosion‑resistant finish 2,500 N holding force for secure clamping Compact 67 mm arm for tight spaces Massive holding arm with safety lock Consistent clamping that supports production targets The clamp delivers a clear operational advantage through a high holding force of 2,500 N and a maximum pressing force of 2,000 N, which together ensure components remain immobile during machining or assembly. These figures translate directly into fewer rejects and less rework, because the clamp maintains repeatable positioning under dynamic loads. The toggle mechanism converts handle movement into secure locking action, making setup faster and results more predictable for series work. Built to withstand workshop environments Constructed from galvanised steel, the device resists corrosion and stands up to humid or oily workshop conditions. The massive holding arm increases structural rigidity and reduces flex, while the overall weight of 0.37 kg keeps the clamp light enough for portable jigs yet robust enough for daily use. This combination reduces maintenance cycles and extends service life, lowering total cost of ownership in routine production environments. Compact mounting for flexible fixture design The vertical‑foot mounting allows the clamp to be integrated into tight fixtures and modular tooling systems where space is limited. With an arm length of 67 mm, the clamp suits short‑reach applications without compromising clamping range. The vertical orientation is particularly useful where horizontal clearance is restricted or when clamps must be positioned above a workpiece to avoid interference with tooling. Safety features that protect operators and parts A built‑in safety lock secures the toggle in the closed position, preventing accidental opening during vibration or handling. The robust mechanism reduces the risk of slippage and protects sensitive workpieces from impact. Together with the sturdy holding arm, this safety provision supports safe, efficient workflows in both manual and semi‑automated stations, increasing operator confidence and process reliability. Contact Metav Werkzeuge for availability, mounting advice and delivery details for the Kukamet vertical clamp 212 — reliable workshop clamping supplied from Emmerich with expert consultation by phone +49 2822 7131930 or eMail info@metav-werkzeuge.com Technical data SKU: 212-3-D-L-C1 GTIN: 8680731501629 ECLASS: 21041717 ETIM: EC011973 Facts Arm length: 67 mm Weight: 0.37 kg Max pressing force: 2,000 N Max holding force: 2,500 N Special features Mounting: vertical foot Material: galvanised Massive holding arm Safety lock Category: Clamps FAQ What holding capacity does the clamp provide? The vertical clamp 212 offers a maximum holding force of 2,500 N, providing secure retention for a wide range of workshop and light industrial tasks. Can this clamp be used in corrosive or humid environments? Yes, the galvanised finish on the Kukamet vertical clamp 212 improves resistance to corrosion and suits damp workshop conditions. How is the clamp mounted to a jig or fixture? Mounting is via a vertical foot, allowing direct attachment to plates or fixture bases where a vertical mounting orientation is required. What are the primary safety features of the clamp? The clamp incorporates a safety lock and a massive holding arm that together prevent accidental release and reduce the risk of workpiece movement under vibration. Is the clamp suitable for tight or compact assemblies? With a 67 mm arm length and a compact footprint, the Kukamet clamp 212 is designed for installations where horizontal space is limited. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
2000N Vertical Clamp With Horizontal Base, Massive Holding Arm And Safety Lock - Kukamet
Compact design, massive holding arm and integrated safety lock combine with a rated 2,000 N clamping force to provide dependable process stability in production fixtures; the horizontal mounting foot and 167 mm lever arm ensure stable installation and extended reach. Order the vertical clamp directly via Metav Werkzeuge or ask our consultants if needed. Vertical Clamp 211 (B211-3-D-L-C3) — 2,000 N clamping force, 167 mm arm — Kukamet A Vertical Clamp 211 designed for secure vertical holding in jigs and fixtures, fitted with a horizontal mounting foot for stable attachment Massive holding arm with safety lock 2,000 N clamping force, 2,500 N holding force 167 mm lever arm for extended reach Horizontal mounting foot for stable installation Consistent clamping performance that supports production quality The clamp delivers a clearly defined 2,000 N clamping force and a 2,500 N holding force, values that translate into reproducible holding power during assembly and machining operations. The distinction between clamping and holding force is important: the nominal clamping force indicates the active force applied by the lever mechanism, while the higher holding force reflects the clamp’s static resistance once engaged. This combination reduces rework and helps maintain tolerances, contributing to measurable improvements in throughput and first-pass yield. Durable construction and fail-safe locking for safe operation A massive holding arm and an integrated safety lock provide mechanical robustness and protection against accidental release during vibration or incidental contact. The component is finished with a blackened finish that offers corrosion resistance appropriate for workshop environments, while the compact mass (0.41 kg) makes the clamp easy to position within fixtures without compromising strength. The 167 mm lever arm affords additional mechanical advantage and reach, enabling effective clamping across a range of part geometries. Simple integration into fixtures and steady supply chain support The clamp’s horizontal mounting foot allows secure bolting to flat fixture surfaces and straightforward alignment within production jigs, enabling fast retrofit in existing setups. Supplied as a single-piece toggle clamp, it suits repetitive operations where repeatability and safety are priorities. For extended projects or multi-site rollouts, Metav Werkzeuge combines a broad product range with reliable logistics from Emmerich, supporting uninterrupted delivery and helping to consolidate purchasing for precision equipment. For local stock information, ordering options or to discuss the clamp’s suitability for a specific fixture, contact Metav Werkzeuge in Emmerich by email or phone for expert advice and prompt delivery coordination. Technical Data Article number: B211-3-D-L-C3 Manufacturer: Kukamet Model: 211 Facts Arm length: 167 mm Max clamping force: 2,000 N Max holding force: 2,500 N Weight: 0.41 kg eClass: 21041717 ETIM: EC011973 Special features Horizontal mounting foot Massive holding arm Safety lock Finish: blackened FAQ What clamping performance can be expected from this clamp? The Vertical Clamp 211 from Kukamet provides a rated clamping force of 2,000 N and a holding force of 2,500 N, designed for repeatable, secure holding in assembly and machining fixtures. How is the clamp mounted? Mounting is via the horizontal mounting foot supplied with the unit; the flat-foot design enables direct attachment to fixture plates and jigs for stable positioning. Does the clamp include a safety mechanism? Yes, the clamp features an integrated safety lock to prevent unintended opening and to maintain secure holding under vibration or incidental loads. What is the lever length and how does it affect use? The lever arm measures 167 mm, offering increased reach and mechanical advantage for clamping parts with greater overhang or variable profiles. What maintenance is recommended for long service life? Regular inspection of the locking mechanism and keeping the moving parts free of heavy contamination will preserve function; light lubrication as appropriate for the workshop environment will help maintain smooth operation of the Vertical Clamp 211. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
2000N Vertical Clamp With Safety Lock, Horizontal Foot Mount, Black Oxide Finish - Kukamet
Take advantage of the combination of compact installation, 2,000 N clamping force, and a secure safety lock for reliable fixture holding and consistent repeatability; order the clamp directly via Metav Werkzeuge or consult our team for application advice. B211-3-L Vertical toggle clamp by Kukamet — 2,000 N clamping force, safety lock The 211 vertical clamp is a compact vertical hold-down toggle clamp designed for jigs, fixtures and production benches where secure, repeatable clamping and quick action are required. Vertical hold-down action with 2,000 N clamping force Safety lock prevents accidental release Horizontal base for simple mounting Blackened finish for corrosion resistance Secure clamping that improves process reliability A compact toggle clamp with 2,000 N clamping force and a 2,500 N holding force offers a reliable way to secure parts during machining, assembly or inspection. The mechanism converts lever movement into vertical pressure, producing a consistent and measurable clamping effect useful in repeat-production settings. The integrated M8x50 spindle allows fine height adjustment to accommodate varying workpiece thicknesses; this adjustment capability reduces setup time and improves positional accuracy. In practice, the robust clamping figures mean medium-duty fixtures can be stabilised without additional bracing, reducing secondary operations and improving throughput. Space-saving design for straightforward integration The low-profile design and horizontal base make the clamp simple to mount on fixture plates, rails or bespoke tooling. At approximately 0.415 kg, the unit is light enough to be fitted where mass is critical but sufficiently sturdy for frequent use. The blackened finish provides basic surface protection while presenting a neutral appearance in production environments. Owing to its compact footprint, the clamp can be positioned close to the workpiece to reduce lever travel and assist with ergonomic workflow planning on assembly benches and CNC loading stations. Built-in safety and maintenance-friendly construction A positive safety lock prevents unintended release during handling and when the fixture is under external load, adding a layer of operator protection and process security. The toggle action is tolerant of dirt and typical workshop contaminants, and routine maintenance is limited to periodic lubrication and inspection of the spindle thread. Durability is supported by the finished surface and solid construction, which together ensure consistent performance over many cycles and contribute to lower long-term tooling costs. Contact Metav Werkzeuge today to discuss the Kukamet vertical toggle clamp (SKU B211-3-L) and receive tailored advice and reliable delivery from Emmerich; reach out by phone at +49 2822 7131930 or by e‑mail at info@metav-werkzeuge.com Technical data Article number: B211-3-L GTIN: 8680731507720 Category: Spanner SKU: B211-3-L Numbers / Core technical data Clamping force (max): 2,000 N Holding force (max): 2,500 N Weight: 0.415 kg Spindle: M8x50 Special features / Design Mounting: horizontal base Finish: blackened (black oxide) Safety lock: integrated Material: blackened steel ETIM: EC011973 eClass: 21041717 FAQ What clamping force can be expected from this clamp? The clamp delivers a maximum clamping force of 2,000 N, which is suitable for a wide range of medium-duty holding tasks; the product B211-3-L by Kukamet is designed to provide consistent vertical pressure in fixtures. How is the clamp mounted to a fixture plate? Mounting is via the horizontal base, allowing the clamp to be bolted directly to plates or rails; the Kukamet vertical toggle clamp fits typical workshop mounting patterns and accepts an M8x50 spindle for height adjustment. Does the device include a safety mechanism to prevent accidental release? Yes, an integrated safety lock prevents unintended opening under load, increasing operator safety and maintaining workpiece position during handling. Is the clamp suitable for repeated industrial use? The robust construction, finished surface and simple maintenance requirements make the B211-3-L suitable for repetitive production cycles and fixture applications where repeatability is important. Can the spindle be adjusted for different workpiece heights? Adjustment is provided by the M8x50 spindle, enabling fine tuning of the clamping height to accommodate varying component thicknesses. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
2000N Vertical Clamp With Safety Lock, M8x50 Spindle, 2500N Holding Force, Blackened - Kukamet
Take advantage of the combination of compact design, reliable holding force and an integrated safety lock to keep fixtures steady during machining. The robust clamping performance and simple vertical-foot mounting support efficient set-up and lower rework rates. Order the vertical clamp directly via Metav Werkzeuge or ask the consultants for tailored advice. Vertical clamp 212 — vertical base with safety lock, Kukamet Vertical clamp 212 is a compact clamp for secure vertical mounting and consistent clamping in workshop jigs and fixtures Safety lock for secure clamping Vertical foot for sturdy mounting 2,000 N clamping force Blackened finish for corrosion resistance Reliable clamping that keeps production moving The Vertical clamp 212 combines a high clamping capacity with a compact footprint to support repeatable fixturing. With a rated clamping force of 2,000 N and a holding force of 2,500 N, the device reduces movement under load and minimises rework. The integrated safety lock prevents unintentional release during handling, translating into fewer interruptions on the shop floor and improved throughput. Technical terms explained: clamping force refers to the axial force applied to secure a workpiece; holding force is the maximum retention under shear or side loads. Fast mounting and predictable alignment for efficient setup A vertical base design enables direct attachment to machine tables or fixture plates, shortening preparation time and improving repeatability. The clamp is fitted with an M8x50 spindle, which permits simple adjustment and fine control of clamping distance without specialised tools. The low mass (0.415 kg) and compact form factor make repositioning straightforward while maintaining stability. These attributes reduce setup time per operation, supporting lean workflows and faster changeovers in production environments. Durable finish and workshop-grade safety features Constructed with a blackened finish, the clamp offers enhanced surface protection against corrosion and everyday wear. The safety lock mechanism adds an operational safeguard for handling and intermittent operations where accidental release would be critical. Material choice and finishing extend service life and preserve performance, helping workshops avoid frequent replacements. Combined with the unit’s measurable forces and standardised spindle, this makes the clamp a dependable component for jigs, fixtures and general workshop clamping tasks. For reliable clamping solutions from Kukamet, contact Metav Werkzeuge to discuss suitability for specific fixtures or to request technical data tailored to individual applications. Technical data SKU: B212-3-L GTIN: 8680731507898 Manufacturer: Kukamet Material/finish: blackened Attachment: vertical foot Safety lock: yes Numbers Clamping force (max): 2,000 N Holding force (max): 2,500 N Weight: 0.415 kg Spindle: M8x50 eClass: 21041717 ETIM: EC011973 Special features Safety lock for secure operation Vertical base for direct mounting Blackened surface for corrosion resistance Compact, lightweight design Category: spanner FAQ How much clamping force does the clamp provide? The clamp delivers a maximum clamping force of 2,000 N and a holding force of 2,500 N, suitable for many general fixturing tasks with the Vertical clamp 212 (SKU B212-3-L). Can the clamp be mounted directly to a fixture plate? Yes; the vertical foot design allows direct mounting to machine tables and fixture plates for stable, low-profile installation. What spindle specification is used for adjustment? Adjustment is via an M8x50 spindle, providing fine control of clamping travel and straightforward replacement with standard hardware. Is the clamp suitable for wet or corrosive workshop environments? The blackened finish improves surface resistance to corrosion and daily wear, enhancing durability in standard workshop conditions. Does the clamp include a safety mechanism? The clamp is equipped with a safety lock to prevent unintended release during handling and intermittent operations. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
2000N Vertical Clamp With Safety Lock, Stainless Steel, Horizontal Foot - Kukamet
Take advantage of a compact, corrosion-resistant clamp that combines stainless steel durability with a proven safety lock to secure workpieces reliably; order the unit directly via Metav Werkzeuge or consult their specialists for fixture compatibility. Kukamet Vertical Clamp 211 — stainless steel, safety lock Kukamet Vertical Clamp 211 is a vertical clamping device designed for stable, repeatable workholding in jigs and fixtures across light to medium industrial applications. Stainless steel construction for durability Safety lock for secure, vibration-resistant hold 2,500 N maximum holding force Horizontal-foot mounting for easy fixture integration Built for consistent, measurable production performance The vertical clamping solution is engineered to deliver precise, repeatable retention where process stability matters. With a holding force of 2,500 N and a clamping force of 2,000 N, the device ensures components remain immobile under machining or assembly loads, reducing rework and scrap. The M8x50 pressure spindle provides an adjustable contact point, allowing fine control of clamping pressure; this threaded spindle format is an industry-standard choice for toolroom and fixture setups, enabling maintenance and spindle replacement without special tools. The measurable force values contribute directly to production reliability and predictable cycle outcomes. Quick integration into existing fixtures and tooling Designed with a horizontal foot attachment, the clamp installs easily on standard plates and t-slots, shortening setup time and simplifying retrofits. The compact, low-profile body and low weight support space-efficient layouts and allow several units to be mounted closely for multi-point retention. The clamp’s lever-style action facilitates fast part loading and unclamping, improving throughput on repetitive tasks. Where throughput is a priority, the mechanical simplicity of the design translates into fewer failure modes and easier routine checks, supporting uninterrupted operation. Corrosion resistance and operational safety for everyday use Constructed from stainless steel, the clamp resists corrosion in workshop environments and requires minimal surface care, supporting long service life and consistent contact geometry. The integrated safety lock prevents accidental release under vibration or when subject to incidental impacts, enhancing operator confidence during handling and machine cycles. For applications that demand both durability and secure retention—such as light machining, assembly or inspection fixturing—this vertical clamping device provides a balanced combination of robustness and user-safe operation. For tailored advice on integrating the Kukamet Vertical Clamp 211 into specific fixtures or to confirm compatibility with existing tooling, contact Metav Werkzeuge in Emmerich — their specialists will help assess suitability and next steps Technical data SKU: S211-3-L GTIN: 8680731509137 Brand: Kukamet Model: 211 Facts Maximum holding force: 2,500 N Maximum clamping (pressure) force: 2,000 N Weight: 0.415 kg Pressure spindle: M8x50 Special features Material: stainless steel Mounting type: horizontal foot Safety lock included Lever clamp style for fast actuation FAQ What forces can the clamp withstand? The Kukamet Vertical Clamp 211 delivers a maximum holding force of 2,500 N and a clamping force of up to 2,000 N (SKU S211-3-L), suitable for light to medium duty fixtures. Is the clamp suitable for corrosive workshop environments? Yes, the clamp is made from stainless steel, which offers corrosion resistance and reduces the need for frequent surface maintenance. How is the clamp mounted to a fixture plate? Mounting is via a horizontal foot designed for attachment to standard plates or t-slot fixtures, enabling straightforward integration into existing setups. Can the pressure spindle be adjusted or replaced? The pressure spindle is specified as M8x50, a common threaded spindle size that allows adjustable clamping and straightforward replacement if required. Does the clamp include any safety features to prevent accidental release? The unit features an integrated safety lock, which secures the clamp in the closed position and reduces the risk of accidental opening under vibration or impact. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
2000N Vertical Clamp, 2500N Holding Force, Zinc Plated, Vertical Foot Mount - Kukamet
The compact galvanised design delivers dependable clamping with a high holding force and a robust pressing capacity, ensuring secure fixture clamping in light industrial and workshop environments. Order directly via Metav Werkzeuge or consult the technical team for suitability and rapid supply. Vertical clamp 212 by Kukamet — galvanised, 2.5 kN holding force The Vertical clamp 212 is a compact galvanised vertical-foot clamp designed for secure workpiece holding in bench fixtures and light industrial jigs. Galvanised finish for corrosion resistance 2.5 kN maximum holding force Vertical-foot mounting for bench fixtures Compact design, only 0.415 kg Secure, measurable clamping for repeatable setups The clamp provides a 2,500 N maximum holding force and a 2,000 N pressing force, values that translate into reliably fixed workpieces under machining and assembly loads. Stating forces in newtons gives a clear, comparable performance measure for fixture designers and production planners; higher nominal force reduces slippage risk and improves process repeatability. The mechanical spindle actuation allows predictable load application, supporting quality control routines and reducing cycle variation in repetitive tasks. Built for workshop environments with galvanised protection A galvanised finish protects the body against workshop humidity, coolant mist and general wear, extending service life without frequent refurbishment. The unit’s compact footprint and low mass (approx. 0.415 kg) make it suitable for dense fixture layouts and portable clamping stations where weight and space matter. Lightweight construction also simplifies handling during fixture assembly and transport while the corrosion-resistant surface keeps contact faces intact for consistent performance over time. Straightforward mounting and standard spindle for easy integration Equipped with a vertical-foot mounting arrangement, the clamp integrates directly into bench plates and base plates with vertical support. The spindle specification M8x50 provides a familiar standard thread for replacement or adjustment, and the design omits an external arm (not applicable) to keep the contact area compact. This configuration suits modular tooling systems and makes retrofitting into existing jigs quick, with minimal profile change to the work envelope and straightforward mechanical attachment. Practical supply and trusted partnership for production continuity Available through Metav’s distribution, the clamp benefits from a supplier network focused on consistent availability and industry-grade selection. Metav’s offering aims to make precision accessible across workshops and trade customers, combining a broad product range with a transparent logistics approach from Emmerich. For procurement and line-planning, the combination of measurable clamping values and durable finishing supports dependable integration into production fixtures and maintenance regimes. For additional technical clarification, the Metav team can be contacted by email or phone for specification matching and series planning. For reliable workshop clamping, request the Kukamet Vertical clamp 212 from Metav Werkzeuge for fast supply and expert advice from Emmerich, ensuring the correct fixture configuration for the intended application Technical data Article number: 212-3 GTIN: 8680731501582 Manufacturer: Kukamet Facts Weight: 0.415 kg Maximum holding force: 2,500 N Maximum pressing force: 2,000 N Spindle thread: M8x50 Mounting type: vertical foot Material: galvanised Special features Galvanised finish Compact, lightweight design Arm: not applicable Category: Spanner FAQ Is the clamp suitable for long-term use in humid workshop conditions? The galvanised finish on the Vertical clamp 212 provides corrosion resistance suitable for humid workshop conditions, helping to maintain clamping reliability over time. What mounting arrangement is required for installation? The unit uses a vertical-foot mounting suitable for bench plates and base plates; the M8x50 spindle is compatible with standard fixture attachment practices. Can the clamp deliver consistent clamping force for repetitive operations? Yes, the specified 2,500 N holding force and 2,000 N pressing force are defined to enable consistent clamping performance across repetitive cycles when installed correctly. Is an arm supplied with the clamp for offset clamping? No; the design denotes the arm as not applicable, so the clamp is intended for direct vertical clamping without an external lever arm. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
2000N Vertical Toggle Clamp 2500N Holding Force, Zinc Plated Angle Base - Kukamet
Take advantage of a compact, galvanised vertical clamp offering 2,000 N clamping force and a high holding capacity of 2,500 N; robust performance and an angle‑foot mounting support reliable fixture integration — order the unit directly via Metav Werkzeuge or consult the advisors for application guidance. Vertical clamp 213 — Kukamet, 2,000 N clamping force, galvanised The Vertical clamp 213 is a compact toggle clamp designed for secure vertical workholding in jigs and fixtures across light to medium industrial applications. Vertical clamping force 2,000 N Holding force up to 2,500 N Galvanised for corrosion resistance Angle‑foot mounting for easy fixing Consistent clamping for reliable throughput The 213 delivers a defined clamping force of 2,000 N and a maximum holding force of 2,500 N, which translates into reproducible workholding and fewer process interruptions. Consistency in clamp force reduces rework and inspection effort in serial production, supporting a smoother machining or assembly cycle. Measurements and forces are stated as technical parameters to allow straightforward integration into process planning. Durable finish and precise contact elements A galvanised surface provides basic corrosion protection for workshop environments while keeping maintenance requirements low. The pressure spindle is specified as M8 x 50, enabling standardised replacement parts and predictable contact geometry. With a mass of 0.47 kg, the unit combines low weight with mechanical robustness, making it suitable for mobile fixtures and quick-change jigs where balance and handling matter. Space‑efficient mounting that simplifies assembly The angle base fixing offers straightforward attachment to plates and fixture frames without complex adapters. The compact footprint of the clamp minimises interference with surrounding tooling and allows close‑packed arrangements on fixture plates. Where machine access is limited, the slim profile supports easier positioning and repeatable alignment during set‑up. Designed for repeatability and low upkeep This toggle‑style clamp is intended for repeated engagement in production and assembly tasks, offering secure vertical workholding with minimal adjustment. Routine inspection focuses on the spindle and fastening points; no specialised servicing is required beyond standard workshop care. The simple design and galvanised finish make it a pragmatic choice for economic fixtures and small series production. Contact Metav Werkzeuge for availability and technical comparison of the Kukamet vertical clamp 213; Metav’s specialists in Emmerich provide application advice and secure delivery — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data SKU: 213-3 GTIN: 8680731501940 Manufacturer: Kukamet ECLASS: 21041717 ETIM: EC011973 Core specifications Clamping force (max): 2,000 N Holding force (max): 2,500 N Pressure spindle: M8 x 50 Weight: 0.47 kg Design and features Mounting: angle base Material: galvanised steel Special feature: none Designation: Vertical clamp 213 FAQ What is the maximum clamping force of this clamp? The clamp provides a maximum clamping force of 2,000 N; the specified holding capacity is 2,500 N, as listed for the Kukamet vertical clamp 213. How is the clamp mounted to a fixture? Mounting is realised via an angle base, allowing direct attachment to fixture plates or frames without special adapters for the 213. Is the surface treated against corrosion? Yes, the unit is galvanised, offering basic corrosion resistance suitable for standard workshop environments. What are the key replacement or wear parts? The pressure spindle specified as M8 x 50 is the primary contact element; routine checks of the spindle and fastening points ensure continued performance of the vertical toggle clamp 213. Is the clamp suitable for compact assemblies and mobile fixtures? With a weight of 0.47 kg and a compact footprint, the clamp is designed for easy handling and integration into tight fixture arrangements. Manufacturer: Kukamet Fevzi Çakmak Mah.10644 Sk. No:61-63 42050 Karatay / KONYA TÜRKİYE / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
200mm Block Jaw Set Unstepped Unhardened 3 Pieces - RÖHM
Take advantage of a robust clamping solution that combines compatibility with 200 mm chucks, a customisable unstepped jaw design and a three-piece configuration for complete jaw coverage; order directly via Metav Werkzeuge or consult the Metav team for application-specific advice. Block jaw set — RÖHM, for 200 mm chuck, unstepped design The Block jaw set is designed for external clamping on lathes and machining centres with a 200 mm chuck diameter, providing a flexible basis for custom jaw machining and secure part holding. Fits chuck Ø 200 mm Unstepped block jaw design Three-piece set for full chuck coverage Reliable clamping for consistent production quality The set offers a straightforward solution for external clamping needs on chucks with a 200 mm diameter. The unstepped jaw profile is supplied in a soft, unmachined state so that the clamping surfaces can be tailored precisely to the workpiece. This approach improves repeatability and reduces set-up iterations because the jaws can be machined to match exact part contours, ensuring contact over the intended gripping surface rather than relying on generic contours. Clear compatibility reduces uncertainty at the selection stage and supports efficient batch processing. Flexible machining for bespoke component support Delivered as a three-piece pack, the components enable full coverage of standard three-jaw chucks and simplify balancing and alignment during installation. The unstepped design permits bespoke machining on a lathe or milling fixture so that a single jaw set can serve multiple part families when re-profiled. The resulting adaptability translates into lower tooling inventory and faster changeovers, which benefits job shops and in-house production lines seeking versatile clamping options without compromising on process control. Practical handling and installation benefits Each jaw is shaped for secure seating in the chuck and for straightforward machining; the simple geometry reduces machining time and makes it easier to verify datum references once the custom profile is created. Because the set is specified for a 200 mm chuck, selection is immediate for compatible chucks and adapters; this clarity prevents mismatched ordering and minimises downtime. The compact pack also supports orderly storage and traceability in the tooling cabinet, streamlining workshop logistics. Material neutrality and application scope The product description does not specify base material or heat treatment, so the set is presented as a universal, machinable option suitable wherever custom jaw contours are required. The design is especially useful when parts demand precise contact zones or when off-the-shelf hardened jaws would not provide the required geometry. For users seeking ready-to-run hardened solutions, alternative jaw types remain available, while this set prioritises versatility and economical customisation. For tailored jaw fitting and availability for RÖHM block jaws, contact Metav Werkzeuge in Emmerich by phone on +49 2822 7131930 or by email at info@metav-werkzeuge.com for specific advice and delivery options. Technical data Article number: 4121270200NW Label: Block jaw set for chuck Ø 200 mm, unstepped, 3 pieces per set Brand: RÖHM Facts Chuck diameter: 200 mm Pieces per set: 3 Packaging unit: 1 Special features Unstepped design for custom machining External clamping application Supplied as a three-piece set for three-jaw chucks FAQ What chuck size is this jaw set compatible with? The RÖHM block jaw set is specified for use with chucks of 200 mm diameter and fits standard three-jaw configurations. Can the unstepped jaws be machined to a custom profile? Yes, the unstepped condition allows machining of bespoke gripping profiles so that the jaws can be finished to match the part geometry. Is the base material or hardness specified for the jaws? The available data for this RÖHM block jaw set does not state material or hardness; the parts are provided in an unstepped form intended for subsequent machining. How does a three-piece set benefit a workshop? A three-piece configuration covers the complete circumference of a three-jaw chuck, aiding balance, simplifying alignment and enabling consistent repeatability across mounted workpieces. What is the article number for ordering or reference? The article number for this RÖHM block jaw set is 4121270200NW, which should be quoted for precise ordering and stock enquiries. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200mm Carbide Centre Tip Fixed 60° DIN 806 - Vertex
The combination of a carbide tip, a 60° centre angle and DIN 806 conformity delivers reliable, repeatable centre support for demanding turning operations. Order the part directly via Metav Werkzeuge or consult our advisors for workshop-aligned supply and fast delivery. VLC-115 Fixed Centre Point, Carbide Tip, 60° (Vertex) The centre point is a fixed turning centre with a carbide tip engineered to provide stable workholding and precise axial support in lathe applications. Carbide tip for high wear resistance 60° standard centre angle DIN 806 conformity Fixed design for stable workholding Consistent axial support that keeps production moving The fixed centre offers stable workholding, reducing runout and enabling consistent concentricity across batches. With a 60° angle that follows the DIN 806 specification, centres are positioned reliably during turning and facing operations; this standardisation helps integrate the component into existing tooling setups without additional adjustments. The result is measurable time savings at the lathe through fewer rework cycles and predictable part geometry. Durable carbide tip for extended service intervals The tip is manufactured from carbide, a material chosen for its abrasion resistance and longevity under cyclical loading. Because the cutting and support point is carbide, wear progression is slowed, leading to longer intervals between replacements and lower lifecycle maintenance costs. In practical terms this means fewer interruptions on the shop floor and a higher proportion of productive machining hours. Simple compatibility and workshop integration The fixed design, combined with the product's conformity to DIN 806, simplifies selection and mounting on standard centres and tailstocks. The compact profile and measured length ensure that the centre point sits securely in tooling configurations, providing the stability needed for accurate support. Clear technical specifications streamline procurement and enable the part to be incorporated into jigs and fixtures with minimal modification. Choose the Vertex VLC-115 for robust, standards-based centre support and contact Metav Werkzeuge for tailored delivery from Emmerich—email info@metav-werkzeuge.com or call +49 2822 7131930 for precise order handling and expert advice. Technical data SKU: VLC-115 GTIN: 4061905086663 EClass: 21022304 Core specifications Length: 200 mm Angle: 60° Weight: 2.1 kg Materials & features Carbide tip Fixed design Standard: DIN 806 Brand: Vertex FAQ What is the primary application of this centre point? The VLC-115 fixed centre point is intended for axial support in turning operations, providing a stable reference point for workpieces in lathes and similar machines. Is the carbide tip replaceable? The centre point is supplied with an integrated carbide tip and is designed as a fixed component rather than a modular, tip-replaceable system. Which standard ensures compatibility with existing equipment? Compatibility is supported by conformity to DIN 806, which aligns the centre geometry and mounting expectations with common workshop standards. How should the part be maintained for longest life? Routine cleaning of chips and light lubrication of the seating surfaces will help preserve accuracy; inspect the carbide tip regularly for signs of wear or damage. Can this centre point be used in high-precision setups? Yes, the fixed design and carbide tip deliver the stability and wear resistance expected for precision-support applications in standard turning processes. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan
200mm Chuck Jaw Set Stepped External Hardened, For 200 mm Chuck - RÖHM
Benefit from hardened, outward-stepped jaws designed for secure external gripping and the clear compatibility with a 200 mm chuck to keep clamping reliable and repeatable; order the replacement directly via Metav Werkzeuge or consult our specialists for tailored advice. RÖHM Jaw Set for 200 mm Chuck — Outward Stepped, Hardened RÖHM Jaw Set for 200 mm Chuck supplies hardened, outward-stepped jaws intended for precise external gripping applications on lathe chucks and similar clamping fixtures. Hardened stepped outer jaws Fits 200 mm chucks Repeatable clamping accuracy Secure external gripping with stepped, hardened jaws The design of the stepped outer jaws allows secure clamping across a broader diameter range while maintaining clamping accuracy. The stepped profile increases contact options for external workpieces, so fewer intermediate accessories are needed. Because the jaws are hardened, wear resistance is improved under repeated use, which preserves concentricity and reduces the need for frequent regrinding. For workshops and production lines that require dependable external clamping, the combination of stepped geometry and surface hardening supports longer service life and stable machining results. Reduce downtime with straightforward replacement and consistent runout A complete jaw set enables rapid restoration of chuck performance after wear or damage, helping to maintain throughput. The geometry and manufacturing tolerances of the jaws contribute to consistent radial runout, which in turn reduces scrap rates and minimises inspection cycles. Where runout matters for precision turning, the hardened surfaces sustain gripping force without premature deformation, supporting reproducible setups. Clear identification of the set and compatibility with a 200 mm chuck streamline inventory management and spare-part logistics in a busy workshop environment. Engineered quality from a recognised clamping specialist Produced to meet workshop demands, the set combines robust materials and heat treatment to deliver durability and dependable gripping behaviour. The brand’s focus on clamping technology ensures attention to concentricity and repeatability, which benefits both one-off jobs and series production. For procurement and technical planning, Metav Werkzeuge acts as a precision partner offering stock availability, transparent order handling and advice from specialists familiar with industrial clamping solutions. The result is a practical balance between operational reliability and maintenance predictability. Order genuine RÖHM replacement jaws through Metav Werkzeuge for assured clamping performance; for specification queries or delivery options contact info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 4121268200NW SKU / UID: 4121268200NW Product type: Jaw set (Bohrbackensatz) Manufacturer: RÖHM Suitable for chuck Ø: 200 mm Packaging unit: 1 Numbers / Core technical data Chuck diameter compatibility: 200 mm Packaging unit: 1 Article number: 4121268200NW Special features Hardened stepped outer jaws Designed for external gripping applications Full replacement jaw set for chuck Ø 200 mm Manufacturer: RÖHM FAQ What chuck size is this jaw set compatible with? The jaw set is specified for use with a 200 mm chuck and is designed to provide secure external clamping at that diameter. Are the jaws heat treated for wear resistance? Yes, the outward-stepped jaws are hardened to improve wear resistance and to help maintain clamping concentricity over prolonged use. Can this set be used for internal gripping tasks? The geometry is intended for external gripping; for internal applications, alternative jaw types are recommended. How does the jaw design affect runout and repeatability? The stepped profile and precision machining contribute to consistent clamping accuracy, reducing radial runout and improving repeatability between set-ups. Which article number should be ordered for this item? Order using article number 4121268200NW to ensure the correct RÖHM jaw set is supplied Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Secure components with reliable workpiece clamps
Workpiece clamps, also known as workholding clamps or workholding devices, form the essential mechanical interface between machine and part in industrial fabrication. They keep components absolutely play-free, positionally accurate and vibration-resistant during milling, turning, drilling or grinding.
How workpiece clamps ensure process stability
A correctly specified clamping concept transfers the high cutting and feed forces of modern CNC machines into the machine table or spindle without deforming the part. The right combination of mechanical, hydraulic, pneumatic or magnetic solutions enables fast, repeatable setups and supports automated part change where required. Typical applications range from single-part turning to high-volume series milling and complex five-axis machining.
Concrete production benefits at a glance
- repeatable positioning: reduces scrap and rework
- high clamping forces: withstands aggressive cutting without part movement
- reduced set-up time: modular systems and quick-change features speed throughput
- improved surface finish: vibration damping for finer results and tighter tolerances
- flexible compatibility: vices, chucks, clamping plates and zero-point systems for diverse geometries
Why Metav's range is the practical choice
Metav combines decades of specialist know-how with a broad, handpicked range that democratises precision for workshops and industry alike. Based in Emmerich, Metav acts as a quality filter for the European market and supplies more than 250,000 products from precision metrology to complete workshop equipment. With the trust of over 48,000 customers, Metav offers a single-source approach that reduces supplier complexity and secures dependable delivery to your workbench.
Technical data
- function: mechanical interface between machine and workpiece
- primary requirements: absolute positional accuracy; vibration reduction; high clamping forces
- technologies: mechanical, hydraulic, pneumatic, magnetic
- typical components: machine vices; chucks; clamping plates; zero-point systems; pratzen; clamping jaws
- application areas: milling; turning; drilling; grinding; automated part change systems
- production benefits: reduced set-up time; enhanced process security; optimised series and single-part production
The practical summary
Workpiece clamps bring the stability and repeatability required to meet tight tolerances and excellent surface quality, making them indispensable across machining operations. Choosing the right workholding clamps and modular workholding devices is a decisive step towards higher productivity and consistent part quality.
FAQ
What types of workpiece clamps are suitable for automated machining?
Workholding clamps with quick-change modules, hydraulic actuation or magnetic systems are commonly used for automated machining. These workholding devices enable fast, repeatable part changes and integrate with zero-point systems.
How do workpiece clamps affect surface finish and tolerances?
A stable clamping concept minimises vibration and part movement; this improves surface finish and supports achieving narrow tolerances when using high-precision workpiece clamps or workholding devices.
Can the same workpiece clamps handle different part geometries?
Modular workholding clamps and adaptable clamping jaws allow flexible fixturing for varied geometries; combining vices, clamping plates and pratzen increases versatility on the shopfloor.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com