Heavy-duty workshop verniers for large components
Our heavy-duty workshop verniers provide precise external and internal measurement of massive workpieces such as large shafts, flanges and housings, delivering stability and repeatable results even across spans up to 10,000 mm. Designed for the demands of heavy industry, shipbuilding and rail vehicle manufacture, they combine a distortion‑resistant construction in hardened or weight‑optimised special steel with ergonomic features like force‑limited measuring systems and fine adjustment for exact slide movement. Available in analogue versions with fine vernier scales or digital variants with data outputs for quality assurance integration, these calipers ensure reliable dimensional control in XXL machining.
1000mm Workshop Caliper 0.05mm Resolution Monoblock Fine Adjustment Stainless Steel Matt Chrome Scale 200mm Jaws In Case - Metav IndustryLine
Take advantage of the long 0–1000 mm reach together with a hardened stainless steel monoblock frame and a fine-adjustment screw for repeatable workshop measurements; order the workshop caliper directly via Metav Werkzeuge or ask our consultants if further guidance is required. Metav IndustryLine Workshop Caliper M201.329.3 — 0–1000 mm, Monoblock, Hardened Stainless The Metav IndustryLine M201.329.3 is a workshop caliper engineered for long-range dimensional checks on larger components in metalworking and fabrication environments. 0–1000 mm measuring range Hardened stainless steel, matt-chromed scale Monoblock construction for stability Fine-adjustment screw for precise setting Precision where long reach matters This caliper provides a 0–1000 mm measuring range combined with an analog resolution of 0.05 mm, which corresponds to the industrial mechanical standard for workshop vernier calipers. The scaled vernier (1/128" on the upper scale, 1/20 mm on the lower) enables clear interpolation without electronics, while the adherence to DIN 862 for the specified jaw configuration ensures traceable dimensional practice. The practical benefit is the ability to measure large castings, assemblies and fabricated parts with consistent repeatability and clear, immediate readings. Built for workshop robustness and longevity A single-piece monoblock frame and hardened stainless steel construction give the instrument high stiffness and corrosion resistance, reducing wear over routine use. The matt-chromed scale lowers glare for reliable reading under workshop lighting and protects the graduation from premature abrasion. For heavy-use environments this translates to fewer replacement cycles and steady measurement performance across extended production runs. Comfort and control for reliable measurements The integrated fine-adjustment screw simplifies small positional corrections and speeds up the setting process on long jaws, improving throughput on repetitive checks. The generous 200 mm jaw length supports firm contact on larger surfaces, and the robust vernier layout is optimised for tactile handling in workshop conditions. Together these features reduce operator-induced variability and make the measuring task both faster and more dependable. Practical applications and care Intended for the large-format range in fabrication, jig making and heavy machining, this caliper is suited to dimensional checks on fixtures, housings and spindles where reach and stability are decisive. Being an analogue instrument with mechanical graduation, routine cleaning and occasional lubrication of the guide surfaces preserve accuracy; the hardened surfaces require minimal maintenance but benefit from dry storage to avoid surface deposits. Metav’s role as a precision partner ensures reliable supply and consistent quality for industrial users seeking durable measurement tools. Contact Metav Werkzeuge for tailored procurement advice and to discuss the suitability of the Metav IndustryLine workshop caliper M201.329.3 for specific large-workshop applications Technical data Article number: M201.329.3 GTIN: 4054469101620 Brand: Metav IndustryLine Category: Messschieber (calipers) Facts Measuring range: 0–1000 mm Resolution: 0.05 mm Jaw length: 200 mm Analog vernier: 1/128" (upper) and 1/20 mm (lower) Norm: DIN 862 (applies for jaw length up to 200 mm) Special features Monoblock construction Hardened stainless steel body Matt-chromed scale Fine-adjustment screw Supplied without pointed tips FAQ What measuring range does this caliper cover? The caliper covers a 0–1000 mm range, making the Metav IndustryLine M201.329.3 suitable for long-reach workshop measurements. How precise is the reading on this instrument? The vernier caliper provides a mechanical resolution of 0.05 mm, which is the industrial standard for analogue workshop calipers. Is the instrument suitable for heavy workshop use? Yes, the monoblock frame and hardened stainless-steel construction of the M201.329.3 are designed for robust, repeatable use in fabrication and machining environments. Which standards apply to this caliper? The caliper complies with DIN 862 for the stated jaw configuration, ensuring compatibility with standard mechanical measuring procedures. What care does the caliper require to maintain accuracy? Regular cleaning of guide surfaces, occasional light lubrication and dry storage will preserve the graduation and movement; the hardened finish reduces the need for frequent servicing. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1000mm Workshop Caliper 500mm Jaws 0.05mm Vernier Stainless Steel Fine Adjustment Monoblock - Metav IndustryLine
Take advantage of the combination of robust monoblock construction, a wide 0–1000 mm measuring range and the precise fine-adjustment thumbwheel for repeatable large-format checks; order directly via Metav Werkzeuge or ask the consultants for tailored advice. M201.329.2 Workshop Caliper — Monoblock, 0–1000 mm Range M201.329.2 is a heavy-duty monoblock workshop caliper designed for large-format measurement tasks where rigidity and repeatability matter most 0–1000 mm measuring range Monoblock, heavy-duty construction Fine-adjustment thumbwheel for precise setting Hardened stainless steel, matt-chromed scale Reliable large-range measurement for heavy components The monoblock design provides a rigid measuring beam that reduces deflection across the full 0–1000 mm travel, making the instrument suitable for repetitive checks on large components. The combination of a long jaw length and robust construction delivers improved measurement stability compared with short‑span tools, which translates into fewer re‑measures and more efficient production flow. The analogue vernier arrangement is engineered for workshop durability while still allowing precise readout where digital systems are not required. Durable materials and controlled positioning for consistent results Constructed from hardened stainless steel with a matt‑chromed scale, the caliper resists corrosion and keeps scale contrast high under workshop lighting, aiding fast visual readings. The integrated fine-adjustment thumbwheel lets operators micro‑position the jaws without backlash, which reduces time lost to repeat alignment and improves first‑time acceptance rates. The vernier configuration provides a practical resolution of 0.05 mm, combining traditional mechanical reliability with the tactile control expected in heavy‑duty metrology. Designed for workshop workflows and straightforward handling The instrument’s build reflects the needs of machining and workshop environments: a stable beam, clear vernier graduations and a measured mass that aids controlled handling. This caliper is particularly appropriate where a robust analogue device is preferred for its simplicity and low maintenance overhead. Maintenance routines remain straightforward thanks to the corrosion‑resistant finish and solid construction, supporting long service intervals and dependable inspection routines on large assemblies. Practical benefits for procurement and inspection routines Choosing this monoblock caliper supports stronger process control: stable measurements over a long range reduce cumulative tolerance issues in assembly, while the fine‑adjustment control speeds up set‑up and reduces operator variability. The instrument’s specification aligns with workshop expectations for repeatable performance and long‑term durability, helping to keep production bottlenecks and rework to a minimum. Contact Metav Werkzeuge for expert advice on the Metav IndustryLine monoblock caliper and to arrange supply from our Emmerich centre — phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: M201.329.2 GTIN: 4054469101613 eClass: 21170344 Tariff number: 90173000 Norm: DIN 862 (up to jaw length 200 mm; from 250 mm per factory standard) Facts Measuring range: 0–1000 mm Jaw length: 500 mm Vernier / resolution: 1/20 mm (0.05 mm) lower; 1/128" upper Mass: 22 kg Special features Monoblock construction Fine-adjustment thumbwheel Hardened stainless steel with matt-chromed scale Analogue vernier display Supplied without pointed tips FAQ What measuring range does this caliper cover? The caliper covers a 0–1000 mm measuring range, making it a large‑range instrument suited to sizeable workshop components. What resolution and vernier specification does the instrument offer? The analogue vernier provides a practical resolution of 0.05 mm (lower scale 1/20 mm) and an additional 1/128" upper vernier for inch references. Which material is used for the scale and body? The body is made from hardened stainless steel with a matt‑chromed scale, which enhances corrosion resistance and legibility in workshop conditions. Is the caliper designed for heavy‑duty workshop use? Yes, the M201.329.2 is built as a heavy‑duty monoblock caliper intended for robust, repeatable measurements across long spans. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1000mm Workshop Caliper With 300mm Jaws, 0.05mm Resolution, Stainless Hardened Monoblock With Fine Adjustment, In Case - Metav IndustryLine
Take advantage of the combination of a monoblock design, hardened stainless steel construction and a fine‑adjustment drive for consistent, reproducible workshop measurements up to 1,000 mm; order the M201.339.2 directly via Metav Werkzeuge or consult the technical advisers for application support. M201.339.2 Workshop caliper with tips (Monoblock, 1,000 mm range) — Metav IndustryLine The M201.339.2 workshop caliper with tips is a robust monoblock caliper intended for workshop and toolroom use, offering long‑range measurement capability and durable construction for repetitive dimensional checks on large components. Monoblock construction for increased rigidity Hardened stainless steel with matt chrome scale Fine‑adjustment drive for precise positioning 1,000 mm measuring range with 300 mm jaws Reliable long‑range accuracy through rigid construction The monoblock frame and hardened stainless steel body provide a stable measuring platform that reduces bending and torsion during handling, which directly improves measurement repeatability. For workshop environments that demand long‑span checks, the rigid design translates into reproducible results and fewer rechecks, supporting efficient production workflows. The extended measuring range up to 1,000 mm enables inspection of large assemblies without the need for improvised fixtures. Precise setting and readable analogue scale for rapid checks Equipped with a fine‑adjustment drive, the caliper simplifies exact positioning of the jaws, making it quicker to reach and lock target dimensions with minimal overshoot. The dual vernier arrangement offers an imperial reference at 1/128" and a metric vernier that corresponds to 0.05 mm, allowing straightforward reading for standard workshop tolerances. This analogue configuration suits environments where a tactile feel and direct scale interpretation are preferable to electronic readouts. Designed for practical workshop applications and extended jaws The long 300 mm jaws increase engagement depth for profiles and stepped areas, so measurements of recessed features and broader surfaces can be carried out with greater confidence. Note that dimensional conformity follows DIN 862 for shorter jaw configurations; for this jaw length the caliper is produced to the factory standard that ensures the required stiffness and usability for larger components. The result is a favourable compromise between reach and handling in everyday machine‑shop operations. Robust finish and low‑maintenance operation for everyday use A matt‑chrome scaled surface reduces reflection under bright workshop lighting, improving legibility of the vernier marks and reducing operator fatigue during repetitive measuring tasks. As an analogue instrument with straightforward mechanics and a monoblock layout, the tool is easy to maintain and repair in‑house, providing long service life and dependable performance for inspection routines and set‑up work. The overall design supports a pragmatic approach to precision without reliance on electronics. Contact Metav Werkzeuge for tailored advice on integrating the Metav IndustryLine M201.339.2 workshop caliper into production processes or for assistance selecting the right measuring solution for specific component geometries Technical Data Article number: M201.339.2 GTIN: 4054469101859 ECLASS: 21170344 TARIC/HS code: 90173000 Facts Measuring range: 1,000 mm Jaw length: 300 mm Metric vernier resolution: 0.05 mm Imperial vernier: 1/128" Special features Monoblock construction Fine‑adjustment drive Hardened stainless steel body Matt‑chrome scale Analogue/vernier format Conforms to DIN 862 for short jaws; factory standard for 300 mm jaws Supplied with tips for special contact geometry FAQ How accurate is the caliper for routine workshop checks? The M201.339.2 workshop caliper provides an analogue metric resolution of 0.05 mm via the vernier, which corresponds to standard industrial accuracy for mechanical vernier calipers and is suited to typical machine‑shop inspections. Can the instrument measure both imperial and metric dimensions? Yes, the caliper includes a dual vernier arrangement with an imperial reference at 1/128" and a metric vernier for 0.05 mm reading, enabling straightforward use across different drawing conventions. Is the caliper suitable for measuring large components and assemblies? The monoblock frame and 1,000 mm measuring range make this caliper appropriate for larger workpieces; the 300 mm jaw length increases engagement depth for stepped and recessed features. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1000mm Workshop Caliper With 300mm Jaws, 0.05mm Resolution, Stainless Hardened Scale, Fine Adjustment, Monoblock, Supplied In Case - Metav IndustryLine
Take advantage of the monoblock construction, hardened stainless steel and the integrated fine‑adjustment screw to secure reproducible measurements across large components; the substantial 0–1000 mm range supports heavy‑duty workshop tasks while the delivery in a protective case simplifies transport. Order the workshop caliper directly via Metav Werkzeuge or ask our consultants if needed. Metav IndustryLine Workshop Caliper M201.329.1 — 0–1000 mm, hardened stainless, fine adjust The Metav IndustryLine Workshop Caliper M201.329.1 is a robust analogue caliper designed for heavy‑duty workshop measurement tasks where long reach and mechanical rigidity are required. Monoblock construction for maximum stiffness Hardened stainless steel with matt‑chrome scale Fine‑adjustment screw for controlled setting 0–1000 mm range for large components Built to stay true on large measurements The monoblock frame and hardened stainless steel construction provide a rigid measuring backbone that reduces bending and wear during repetitive tasks. With a measuring range of 0–1000 mm, this instrument falls into the heavy‑duty workshop category and is intended for larger workpieces where profile stiffness matters; the 300 mm jaw length extends reach for deep bores and recesses without compromising handling. Delivered in a protective case for safe transport, the caliper is engineered to remain serviceable in daily industrial use, lowering downtime and ensuring consistent results across production batches. Practical analogue precision with fine control The analogue vernier offers a readable scale division of 0.05 mm, combined with a vernier specification of 1/128" (top) and 1/20 mm (bottom) to support quick, reliable readings. The integrated fine‑adjustment screw enables controlled approach and exact positioning, ideal for repeated set‑ups or when gradual contact is necessary. Conformity to DIN 862 applies for shorter measuring jaws; for the longer 300 mm jaw the instrument follows the manufacturer's norm while maintaining the robustness expected in workshop metrology. The mechanical design requires no batteries, making it a dependable tool for on‑bench inspection and shopfloor verification. Practical fit within workshop metrology routines As part of a complete workshop toolkit, this analogue caliper is a straightforward instrument for routine checks and calibration comparators. The heavy‑duty concept simplifies measurement of larger assemblies and reduces the need for multiple specialised gauges, supporting the Metav principle of democratised precision. Backed by Metav’s logistics and quality filtering from Emmerich, the caliper is intended to integrate into supply chains where reliability, repeatability and a clear parts‑handling concept are priorities. For selection advice or delivery details from Metav IndustryLine, contact Metav Werkzeuge by e‑mail at info@metav-werkzeuge.com or by phone at +49 2822 7131930 to ensure the caliper matches the workshop requirements. Technical data Article number: M201.329.1 GTIN: 4054469101606 Category: Workshop caliper Facts Measuring range: 0–1000 mm Jaw length: 300 mm Scale division / resolution: 0.05 mm Vernier: 1/128" (top) and 1/20 mm (bottom) Nonius (analogue): mechanical vernier Special features Monoblock construction Hardened stainless steel with matt‑chrome scale Fine‑adjustment screw for controlled setting Analogue vernier, no battery required Delivered in a protective case for transport Conforms to DIN 862 for jaws ≤200 mm; longer jaws to manufacturer's norm FAQ How precise is the reading on this workshop caliper? The workshop caliper provides a scale division of 0.05 mm via its analogue vernier, offering industrially relevant precision for routine shop measurements. Is the instrument suitable for large components and long‑reach tasks? Yes; with a 0–1000 mm measuring range and a 300 mm jaw length, the caliper is designed for heavier, larger components where stiffness and reach are essential. Does the caliper require any power source or batteries? No; the instrument is an analogue vernier caliper and operates mechanically without batteries, ensuring continuous availability on the shopfloor. What protection is provided for transport and storage? The caliper is supplied in a protective case suitable for transport; the case is intended to reduce handling damage but not as a permanent storage environment for long‑term archival purposes. Which standard applies to this instrument? Shorter jaws conform to DIN 862; for the supplied 300 mm jaw, measurements are governed by the manufacturer's norm while maintaining workshop robustness. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1000mm Workshop Caliper With Pointed Jaws 150mm Depth, 0.02mm Graduation, Hardened Stainless Steel, Fine Adjustment, Supplied In Case - Metav IndustryLine
Take advantage of a robust monoblock design, hardened stainless steel construction and precise fine adjustment to keep large-format measurements reliable and repeatable on the production floor; order directly via Metav Werkzeuge or ask the consultants for technical advice. M201.309 Workshop Caliper with Tip — 1,000 mm range, 0.02 mm resolution, stainless The M201.309 Workshop Caliper with Tip is a heavy-duty analogue caliper built for workshop measurement tasks, providing robust external, internal and step measuring capability for large components. 1,000 mm measuring range Hardened stainless steel construction Fine adjustment screw for precise setting Monoblock frame for high rigidity Stable long‑range measuring for larger components Classified in the Large measurement class (500–1,000 mm), this caliper is tailored to workshop and fixture environments where reach and repeatability matter. The monoblock frame reduces flex along the slide, maintaining alignment over the full measuring length and supporting reproducible results on larger workpieces. The extended jaw geometry with a 150 mm tip length enables secure contact on deep features and shoulders, which simplifies handling of housings, large shafts and assembly fixtures without compromising stiffness. Accurate analogue readings with workshop durability The analogue vernier delivers a mechanical resolution of 0.02 mm, keeping the instrument within the range of the highest mechanical precision for calipers. Combined with a matt‑chromed scale on hardened stainless steel, the scale contrast remains clear under workshop lighting and resistive to corrosion. A dedicated fine adjustment screw permits measured, micro‑movement of the slide for exact closing and alignment before the reading is taken, which is particularly useful when measuring step heights or small depth differences where controlled contact force improves consistency. Practical features that support production workflows Designed for use in everyday machine‑shop conditions, the caliper covers external, internal and step measurements in one instrument and is supplied in a transport case for safe handling and storage during site movement. The mechanical vernier format suits environments where robust, battery‑free operation is preferred and service intervals are minimal. Delivered to factory standard (Werksnorm), the instrument is well suited to workshop quality checks and setup tasks; its straightforward mechanics reduce the need for frequent recalibration cycles compared with sensitive electronic instruments. Choose the Metav IndustryLine M201.309 for durable, long‑range workshop measurement and contact Metav Werkzeuge for expert advice and secure supply directly from Emmerich. Technical Data Article number: M201.309 GTIN: 4054469101293 Brand: Metav IndustryLine Facts Measuring range: 0–1000 mm Resolution: 0.02 mm Jaw length: 150 mm Vernier scales: 1/1000" top and 1/50 mm bottom Special features Material: hardened stainless steel with matt‑chromed scale Design: monoblock frame Operation: analogue vernier, fine adjustment screw Measurement types: external, internal, step Delivery: transport case for safe movement Calibration: factory standard (Werksnorm) FAQ How precise is the caliper for workshop tasks? The M201.309 workshop caliper provides a mechanical resolution of 0.02 mm, placing it among the highest‑precision analogue calipers suitable for demanding workshop measurements. Which measurement types can be performed with this caliper? External, internal and step measurements are supported by the caliper; the 150 mm jaw/tip length helps reach deeper features while keeping contact stable. Is the instrument protected for transport between job sites? Yes, the caliper is supplied in a transport case to protect the hardened stainless steel body and scale during movement and storage. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1000mm Workshop Caliper With Pointed Jaws, Fine Adjustment, Monoblock, Hardened Stainless Steel 0.05mm Graduation, Wooden Case - Metav IndustryLine
Benefit from a robust monoblock design, precise fine adjustment and a hardened stainless-steel scale that ensure reproducible measurements across a long 1000 mm range; these features combine to keep production flowing with predictable results. Order the workshop caliper directly via Metav Werkzeuge or consult our technical advisors for application-specific advice. Workshop Caliper M201.339.1 — 1000 mm analogue, fine adjustment (Metav IndustryLine) The Workshop Caliper M201.339.1 is a heavy-duty analogue caliper intended for long-range workshop measurement tasks, offering a 1000 mm measuring range, fine-adjustment screw and hardened stainless-steel scale for reliable component inspection. Monoblock construction for high stability Fine adjustment for precise setting Stainless hardened steel with matt chrome scale 200 mm jaw length for deep reach Stable long-range measurement for large components The caliper's 1000 mm measuring range positions it in the class for long-bar calipers, designed where profile stiffness is essential to keep readings reproducible over distance. The monoblock construction increases rigidity compared with split-frame designs, reducing bending and torsion during handling. With a 200 mm jaw length the instrument reaches deeper features and clamps while maintaining consistent contact geometry, which benefits measurement tasks in heavy machining, jig and fixture inspection, and mould or housing verification. Precise analogue reading with controlled adjustment An analogue vernier with a resolution equivalent to 0.05 mm provides an industrially recognised level of accuracy appropriate for workshop quality control. The combination of a coarse vernier scale (1/128" top) and a metric vernier (1/20 mm bottom) gives flexible reading options on the same instrument, while the fine adjustment screw allows slow, controlled closure for repeatable contact pressure and exact alignment. These features reduce operator-induced error and make this caliper suitable for standard machine-shop checks where dependable, quick readings are required. Rugged materials and workshop-oriented detailing Manufactured from stainless hardened steel and finished with a matt chrome scale, the caliper tolerates workshop environments while keeping scale legibility under typical lighting conditions. The design includes measurement points (tips) for applications that need pointed contact, and the overall build follows established workshop norms referencing DIN 862 for jaw geometry and measuring faces. The robust construction minimises maintenance needs and supports continuous use across shifts, contributing to efficient quality workflows and a low total cost of ownership for medium and large workshops. For large-format workshop measurement needs, contact Metav Werkzeuge to discuss the Metav IndustryLine Workshop Caliper M201.339.1 and arrange purchase or technical consultation Technical data Article number: M201.339.1 GTIN: 4054469101842 eClass: 21170344 Core measurements Measuring range: 0–1000 mm Jaw length: 200 mm Resolution (vernier): 0.05 mm (analogue) Vernier markings: 1/128" (top) and 1/20 mm (bottom) Features and composition Material: stainless hardened steel Scale finish: matt chrome Construction: monoblock Adjustment: fine adjustment screw Special: with measurement tips Norm: DIN 862 (suitable jaw length specification) FAQ What measuring tasks is this caliper best suited for? The Workshop Caliper M201.339.1 is designed for long-range workshop and fixture measurements where a 1000 mm range and increased structural rigidity are required; typical applications include heavy machining, mould inspection and large component verification. How precise are readings from this analogue caliper? Readings are taken with an analogue vernier equivalent to 0.05 mm resolution; the dual vernier layout (1/128" and 1/20 mm) and the fine-adjustment screw support reproducible results for standard industrial quality checks. Is the caliper corrosion resistant and durable for shop use? Yes. The instrument is made from stainless hardened steel and uses a matt chrome scale to preserve legibility and resist typical workshop wear. Can the caliper reach recessed or deep features? The extended 200 mm jaw length improves access to deep bores and recessed features, making it practical for inspection of larger assemblies and components. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1000mm Workshop Caliper With Points 150mm Jaws 0.05mm Vernier, Monoblock, Fine Adjustment, Hardened Stainless Steel In Case - Metav IndustryLine
Take advantage of the combination of hardened stainless steel construction, a monoblock frame and precise fine adjustment for repeatable measurements of large workshop components; order the instrument directly via Metav Werkzeuge or consult the team for application advice. Workshop vernier caliper M201.339 — monoblock, fine‑adjustment caliper by Metav IndustryLine Workshop vernier caliper M201.339 is a robust analogue measuring instrument designed for heavy workshop use, offering controlled positioning and a long measuring range for large components Hardened stainless steel construction Monoblock frame for exceptional rigidity Fine adjustment for controlled positioning 1,000 mm measuring range with long jaws Reliable precision for large‑format measurements The Workshop vernier caliper M201.339 places reproducible accuracy at the centre of large‑component measurement. Built in hardened stainless steel with a matt‑chromed scale, the instrument resists workshop wear and maintains scale legibility over prolonged use. Its 1,000 mm measuring range classifies it in the large‑range category (suitable for 500–1,000 mm applications), where profile stiffness is essential to reduce deflection and secure repeatability. The analogue nonius arrangement provides a practical reading system and the instrument’s nominal 0.05 mm resolution meets typical workshop control needs while keeping handling straightforward for assembly, jig and fixture checks. Controlled operation to reduce measurement variability A dedicated fine adjustment mechanism and a true monoblock frame minimise operator‑induced variation by allowing slow, deliberate closure and a rigid reference geometry. The 150 mm jaws offer extended reach and permit access into deeper bores or between fixtures; the inclusion of pointed tips supports measurements in narrow grooves or recesses. These mechanical choices translate into fewer rework cycles and faster setup times on the shopfloor, offering a measurable workflow advantage for teams working on housings, shafts and large assemblies. Ready for work: compliance, transport and practical use The caliper is an analogue vernier designed in accordance with DIN 862 where applicable for the given jaw length, providing a familiar normative basis for inspection routines. Delivery in a protective transport case ensures secure storage and mobility across the workshop or between sites. As a straightforward, mechanically robust instrument, it serves as a cost‑effective standard for dimensional checks where electronic readouts are not required but mechanical reliability and long reach are. Consider the Metav IndustryLine M201.339 for workshop measurement tasks that demand long‑range stability and controlled adjustment — contact Metav Werkzeuge in Emmerich for precise specification matching and delivery coordination. Technical data Article number: M201.339 GTIN: 4054469101835 ECLASS: 21170344 Tariff number: 90173000 Type: analogue vernier caliper Facts Measuring range: 0–1000 mm Jaw length: 150 mm Resolution: 0.05 mm Nonius: top 1/128" / bottom 1/20 mm Norm: DIN 862 (for jaw length ≤ 200 mm) Special features Material: hardened stainless steel, matt‑chromed scale Monoblock construction Fine adjustment mechanism Supplied with pointed tips Analogue operation Delivered in transport case SKU: M201.339 FAQ What measuring range does this instrument cover? The caliper provides a measuring range of 0–1000 mm; the Workshop vernier caliper M201.339 is intended for large‑format workshop measurements. What level of resolution and accuracy can be expected? The analogue nonius yields a 0.05 mm resolution, matching conventional workshop standards for vernier calipers and supporting reliable dimensional checks. Is the instrument suited to heavy workshop environments? Yes — the hardened stainless steel construction, monoblock frame and matt‑chromed scale make the M201.339 robust against shopfloor wear and suited to regular use on fixtures and assemblies. How does the fine adjustment improve measurement? The fine‑adjustment mechanism enables controlled closing and precise positioning of the jaws, reducing operator influence and improving repeatability for serial checks. Does the caliper comply with recognised standards? The instrument is produced with consideration of DIN 862 for the provided jaw length, giving a normative basis for inspection procedures. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1000mm Workshop Caliper Without Probe Fine Adjustment 0.02mm Resolution Stainless Steel With Hardened Matte Chrome Scale - Metav IndustryLine
Take advantage of robust long‑range measurement, hardened stainless steel construction and a precise fine adjustment mechanism to ensure reproducible results across large components; order directly via Metav Werkzeuge or consult our specialists for tailored advice. Workshop caliper M201.319 (Metav IndustryLine) — 0–1000 mm, 0.02 mm The Workshop caliper M201.319 is a large‑format, analogue workshop caliper designed for heavy‑duty measuring tasks in fabrication and tooling environments, offering long‑span capability with precise micrometric positioning. 0–1000 mm measuring range Hardened stainless steel construction Fine adjustment for accurate positioning For external, internal and step measurements Robust long‑range measurement for large components The caliper provides a 0–1000 mm measuring range that places it in the large‑format category suited to substantial assemblies and fixtures. Built as a monoblock instrument, the rigid profile reduces flex and improves repeatability when measuring long bars, housings or pipe sections. Where single‑handed tools lose stiffness, this caliper maintains alignment over its full span, making it appropriate for quality checks and setup tasks in heavy machining and assembly. Material choice and micrometric control minimise rework Constructed from hardened stainless steel with a matt‑chromed scale, the instrument resists workshop wear and provides a clear, non‑reflective reference for reading. The integral fine adjustment screw allows controlled closing of the jaws so the measuring faces meet the workpiece without overshoot; this controlled contact, together with the caliper’s 0.02 mm mechanical resolution, directly reduces measurement scatter and downstream rework by improving first‑pass accuracy on fits and clearances. Versatile measuring modes and practical jaw geometry Engineered for common workshop tasks, the caliper supports external, internal, and step measurements from the same tool, while the extended 150 mm jaw length enables access into recesses and deeper grooves than standard short jaws. The absence of a pointed tip results in larger, better supported contact faces for repeatable readings on flat, curved and stepped surfaces. Supplied to the manufacturer’s works standard, the instrument is intended as a reliable shopfloor reference for setup, inspection and ongoing quality control. Contact Metav Werkzeuge in Emmerich to discuss technical details or to secure the Metav IndustryLine workshop caliper for the production bench. Technical data Article number: M201.319 GTIN: 4054469101385 ECLASS: 21170344 Customs tariff number: 90173000 Facts Measuring range: 0–1000 mm Minimum range: 0 mm Jaw length: 150 mm Resolution: 0.02 mm Type: Analogue (vernier) Special features Material: hardened stainless steel, matt‑chromed scale Monoblock frame design Fine adjustment mechanism Vernier: 1/1000" (top) and 1/50 mm (bottom) Supplied to works standard Suited for external, internal and step measurements FAQ What measuring range does this caliper cover? The caliper covers a range from 0 to 1000 mm, allowing measurement of large components and assemblies with a single instrument. Is the scale resistant to workshop wear and corrosion? Yes, the M201.319 features hardened stainless steel construction with a matt‑chromed scale for reduced glare and improved resistance to abrasion and corrosion. Can the instrument perform internal and step measurements as well as external checks? Yes, the design supports external, internal and step measurements, making the caliper a versatile tool for routine workshop inspection. What measurement resolution and control does the caliper offer? The instrument provides a mechanical resolution of 0.02 mm and a fine adjustment screw for controlled jaw movement, aiding precise contact and repeatable readings. Is the caliper delivered with an accredited calibration certificate? The caliper is supplied to the manufacturer’s works standard; no ISO 17025 accreditation is indicated in the product data. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1000mm Workshop Caliper Without Probe Fine-Adjustment Stainless Hardened Matt Chrome Scale, For Outside/Inside/Step Measurements - Metav IndustryLine
Taking advantage of the combination of large-span measurement capability, hardened stainless-steel construction and a fine‑adjustment control ensures reproducible results on heavy workshop components; order the caliper directly via Metav Werkzeuge or consult our specialists for application advice. Workshop caliper without tip M201.319.1 — 0–1000 mm, stainless steel, fine adjustment The Workshop caliper without tip M201.319.1 is a robust, monoblock stainless‑steel caliper designed for large‑format measurements in workshop and heavy‑duty metalworking environments. 0–1000 mm measuring range 0.02 mm resolution for fine readings Hardened stainless‑steel body Fine‑adjustment screw for precise setting Robust design for long‑span workshop measurement Built as a long‑bar workshop instrument, this caliper covers a 0–1000 mm span and is classified for large‑format measurement tasks where profile stiffness and reproducibility matter. The monoblock construction reduces torsion and flex over the full measuring length, so measurements on fixtures, housings and large workpieces stay consistent. The frame and jaws are made from stainless steel that has been hardened and fitted with a matt‑chromed scale to reduce glare and wear; that combination supports durable use in busy production areas while preserving scale legibility. High mechanical precision and precise setting control The instrument achieves mechanical fine‑reading through an analogue vernier and a dedicated fine‑adjustment screw, enabling sensitive approach and exact zeroing before any reading is taken. The mechanical design yields a practical resolution of 0.02 mm, placing it among the higher‑precision analogue calipers for workshop use. Dual vernier markings (top and bottom) assist with rapid cross‑checks: the upper scale is graduated in fractions of an inch while the lower scale provides metric readings for direct interpretation on machine drawings. Delivered to a factory standard, the tool supports reliable, repeatable inspection routines without the need for complex electronics. Suited to heavy workshop tasks and multiple measurement styles Designed for common workshop operations, the instrument performs outside, inside and step measurements with the same stability thanks to the long jaw length and the robust carrier. The extended jaw length of 200 mm improves accessibility when measuring deep bores or large contours while preserving control during interior checks. Supplied to workshop specification under the manufacturer’s works standard, this caliper is intended for machinists, toolroom staff and assembly technicians who require a dependable analogue instrument for large components. Technical enquiries are welcome; Metav Werkzeuge provides product guidance for selecting the right measuring tool for the application. For dependable large‑span measurements choose the Metav IndustryLine workshop caliper and contact Metav Werkzeuge in Emmerich for product advice and supply at info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: M201.319.1 GTIN: 4054469101392 eClass: 21170344 Manufacturer: Metav IndustryLine Norm: Werksnorm Facts Measuring range: 0–1000 mm Resolution / reading: 0.02 mm Jaw length: 200 mm Type: Analog vernier caliper Vernier details: 1/1000" (top) and 1/50 mm (bottom) Special features Material: hardened stainless steel, matt‑chromed scale Monoblock construction for increased stiffness Fine‑adjustment screw for precise positioning Measurement types: outside, inside and step measurements FAQ How accurate is this workshop caliper for routine checks? Accuracy is based on the analogue vernier and a practical reading capability of 0.02 mm; the Workshop caliper M201.319.1 offers high mechanical precision suitable for standard workshop inspections. Is the caliper suitable for measuring internal diameters and steps? Yes — the design supports inside and step measurements as well as outside measurements, so the instrument covers the three common measurement styles required in metalworking. What construction ensures stability over the 0–1000 mm span? The monoblock frame and hardened stainless‑steel construction reduce flex and torsion, helping to maintain reproducible measurements across long spans. Which standard is the instrument delivered to? The caliper is supplied to the manufacturer’s works standard (Werksnorm), providing consistent factory specifications for workshop use. What industries and tasks is this caliper aimed at? The tool is intended for heavy‑duty workshop and machine‑shop applications: large fixtures, housings, toolroom work and general heavy machining where long‑span analogue measurement is required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1000mm Workshop Caliper Without Probes 150mm Jaws 0.05mm Vernier Fine Adjustment Monoblock Stainless Steel, Supplied in Case - Metav IndustryLine
Benefit from a hardened stainless-steel construction and precise fine adjustment for reliable, repeatable results on large workshop components; the monoblock design provides stability across extended measuring lengths. Order the caliper directly via Metav Werkzeuge or consult our advisors for tailored technical guidance. Metav IndustryLine Workshop Caliper M201.329 — 1000 mm range, 0.05 mm vernier, monoblock fine adjustment The Metav IndustryLine Workshop Caliper M201.329 is a long-range, hardened stainless-steel caliper designed for robust workshop measurement of large components, combining a 1000 mm measuring scope with a precise fine-adjustment mechanism. 1000 mm measuring range Hardened stainless steel with matt-chromed scale Monoblock frame with fine adjustment Supplied in a protective case Reliable measurement for large workshop components This caliper is tailored to the demands of heavy workshop use: the 1000 mm measuring range places it in the category for long-beam calipers, suitable for sizeable workpieces such as large housings, fixtures and pipe components. The monoblock construction minimises flex over the measuring length, which keeps results reproducible even when handling heavier parts. The stable frame design reduces the need for repeated checks, speeding up routine inspection tasks and supporting a smoother production flow. Clear, repeatable readings with analogue vernier precision Equipped with an analogue vernier system, the instrument provides a practical reading setup: the vernier scales read 1/128 inch (top) and 1/20 mm (bottom), corresponding to a standard workshop resolution of 0.05 mm. This level of resolution is appropriate for many machining and fabrication tasks where robust reproducibility matters more than sub-micron resolution. The matt-chromed scale improves contrast under workshop lighting, and the fine-adjustment screw allows controlled closing of the jaws to avoid overshoot and variability in applied measuring force. Robust materials and compliance for everyday use The measuring faces and beam are manufactured from hardened stainless steel, delivering corrosion resistance and long-term wear performance in busy environments. The jaw length of 150 mm supports deep gripping and offers better support when measuring larger diameters or profiles. Conformance to DIN 862 is maintained for the instrument’s geometry where applicable (jaw length up to 200 mm), ensuring that the caliper meets recognised workshop standards for mechanical calipers. Practical handling and workshop benefits A built-in fine-adjustment mechanism and a monoblock frame combine to make single-handed adjustments straightforward while preserving measurement stability. The caliper is supplied in a protective case for transport and storage, reducing the risk of damage between jobs and keeping the scale clean. For workshops that require dependable, low-maintenance tools, this instrument reduces downtime and supports consistent quality control on larger components. Contact Metav Werkzeuge today to discuss application suitability for the Metav IndustryLine caliper M201.329 and to arrange fast delivery from our Emmerich facility Technical data SKU: M201.329 GTIN: 4054469101590 Category: Messgeräte › Messschieber Facts Measuring range: 0–1000 mm Resolution/vernier: 0.05 mm; 1/128" (top); 1/20 mm (bottom) Jaw length: 150 mm Standard: DIN 862 (applicable for jaw length up to 200 mm) Special features Material: hardened stainless steel with matt-chromed scale Monoblock design Fine adjustment screw Delivered in protective case Analogue vernier instrument FAQ Is this caliper suitable for large workshop parts and fixtures? The Metav IndustryLine Workshop Caliper M201.329 is designed for large components, offering a 1000 mm measuring range and a rigid monoblock frame for reproducible results on sizeable workpieces. What reading resolution does the instrument provide? The caliper uses an analogue vernier with a 0.05 mm resolution (1/20 mm on the lower scale) and an additional 1/128" top scale for inch-referenced readings; this suits general machining and inspection tasks. Does the caliper comply with recognised standards? Yes—geometry and dimensional rules follow DIN 862 where applicable for the specified jaw length, ensuring alignment with common workshop standards. How is the instrument delivered and protected during transport? The caliper is supplied in a robust protective case to safeguard the beam and scale during transport and storage, preserving accuracy between jobs. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1000mm Workshop Digital Caliper 150mm Long Jaws Color Touchscreen Wireless USB ISO 17025 Calibrated - Microtech Metrology
Robust long‑jaw construction, reliable 0.01 mm readout and integrated Wireless + USB data transfer support efficient large‑format quality control. Delivered fully calibrated to ISO 17025 with a calibration certificate, the instrument reduces documentation effort and rework. Order the caliper directly via Metav Werkzeuge or consult our specialists for application advice. Microtech Workshop Caliper — 0–1000 mm digital caliper with 2.4″ colour touchscreen and Wireless+USB The Microtech Workshop Caliper is a long‑range digital caliper built for workshop and fixture tasks up to 1,000 mm, combining a rigid beam design with a precision fine‑adjustment mechanism for reproducible measurements 0–1000 mm measurement range 0.01 mm display resolution Wireless and USB data output Delivered calibrated to ISO 17025 Accurate large‑format measurement with minimal repositioning The long‑span measuring capacity of 0–1000 mm enables direct measurement of sizeable components without repeated repositioning, which speeds up inspection routines and reduces accumulated error. A stiff beam profile and a long jaw (150 mm) give stability across the measuring length, so readings remain reproducible even on heavier workpieces. This design suits applications in fixture construction, housing inspection and general heavy‑duty workshop metrology, where reach and rigidity are both decisive for reliable results. Fast digital readout and seamless data capture for SPC A high‑contrast 2.4" colour touchscreen provides immediate, easy‑to‑read values and intuitive on‑screen controls for switching units or zeroing. The instrument reports values with 0.01 mm resolution and exports measurement records via Wireless and USB connections, simplifying integration with data collection systems and production traceability. By removing manual transcription, this workflow reduces clerical errors and accelerates statistical process control loops for serial production environments. Reproducible contact force and certified traceability Consistent contact is enabled by an adjustable 1–20 N measuring force and a sensitive fine adjustment slide, which together reduce variability caused by operator pressure. Handcrafted measuring jaws ensure parallelism and long‑term wear resistance, producing stable contact conditions over repeated cycles. The caliper is delivered fully calibrated to ISO 17025, complete with a calibration certificate, providing traceable measurement results that integrate directly into documented quality systems and audit requirements. Workshop durability and practical handling Built for everyday shop use, the instrument combines robust electronics and mechanical components to withstand regular handling while remaining serviceable. The long‑range format is balanced to be manageable by one or two operators when required, and maintenance is straightforward thanks to accessible sliding surfaces and modular electronics. Paired with Metav Werkzeuge’s supply chain and product range, this caliper becomes part of a controlled, dependable measurement set‑up that supports ongoing production needs and reduces supply‑chain complexity. For lab‑grade traceability and reliable large‑format measurement, request the Microtech workshop caliper through Metav Werkzeuge — specifications and delivery are handled from Emmerich; email info@metav-werkzeuge.com or call +49 2822 7131930 for tailored advice. Technical Data Article number: 141010216 GTIN: 4061905038921 Manufacturer: Microtech Metrology Digital display: Colour 2.4" touchscreen Data output: Wireless + USB Core technical data Measuring range: 0–1000 mm Resolution: 0.01 mm Measuring force: 1–20 N Jaw length: 150 mm Special features Handcrafted measuring jaws Fine adjustment mechanism Delivered calibrated to ISO 17025 with certificate Digital instrument for workshop and fixture use Long‑span design for large components FAQ Is the instrument delivered calibrated and traceable? Yes. The Microtech workshop caliper is supplied fully calibrated to ISO 17025 and includes a calibration certificate for traceable documentation. What measurement resolution and range does it offer? The caliper provides a 0.01 mm display resolution across a measuring range of 0–1000 mm, suitable for large‑format workshop checks. How are measurement results exported from the device? Measurement data can be transmitted via the caliper’s Wireless and USB interfaces for integration with PCs and data collection systems. Does the caliper maintain consistent contact pressure during measurement? An adjustable 1–20 N measuring force together with a fine‑adjustment slide and handcrafted jaws supports reproducible contact conditions and repeatable readings. For which workshop applications is this caliper best suited? The instrument is designed for heavy‑duty workshop metrology, fixture and housing inspection where extended reach and beam stiffness are required for direct, single‑pass measurements. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
1000mm Workshop Precision Digital Caliper Long Jaws Color 2.4" Touchscreen Wireless/USB ISO 17025 Calibrated - Microtech Metrology
Take advantage of the combination of a 1,000 mm measuring range and ISO 17025 traceable calibration for reproducible, large-format measurements; fine adjustment and handmade jaws ensure reliable contact and reduced measurement uncertainty. Order directly via Metav Werkzeuge or consult our specialists for tailored delivery. Workshop digital caliper by Microtech Metrology — 1,000 mm range, colour touchscreen Workshop digital caliper for robust, large-format workshop and industrial metrology applications, combining long-reach jaws with a responsive colour touchscreen and modern data outputs. 1,000 mm measuring range Colour 2.4" touchscreen display Wireless and USB data output Delivered calibrated to ISO 17025 Accurate measurements for large components without compromise The long-beam design offers a 1,000 mm measuring range while maintaining the rigidity required for consistent results on large parts. With a display resolution of 0.01 mm, the instrument supports standard workshop tolerances and gives clear numerical readouts that reduce reading errors compared with analogue scales. The handmade measuring jaws and fine adjustment mechanism refine contact positioning, limiting over- or under-pressure and improving repeatability for tasks such as checking housings, flanges or large fixtures. Streamlined data capture to speed up quality documentation Equipped with wireless + USB outputs and a 2.4" colour touchscreen, the caliper integrates with data-collection workflows and inspection routines. Measurement values can be transferred directly to QA software or spreadsheets, cutting manual transcription time and lowering the risk of documentation mistakes. The responsive touchscreen simplifies unit switching and menu navigation, while the digital interface preserves traceable measurement sequences for faster process control and reporting. Engineered for dependable everyday workshop use A measuring force range of 1–20 N helps manage contact pressure across different materials and geometries; controlled force reduces deformation on soft workpieces and ensures stable readings on heavy-duty components. The combination of robust construction and a long 300 mm jaw length for deeper reach makes the instrument particularly suited to servicing, jig inspection and assembly applications where access and repeatability are essential. The unit is optimised for practical handling in industrial environments, balancing reach with manageable handling characteristics. Traceable calibration and quality assurance for production settings Delivered with an ISO 17025 calibration certificate, the instrument meets formal laboratory traceability requirements and supports auditable measurement processes. This calibration standard ensures that the measurement chain is documented and comparable across suppliers and inspection stations. For procurement and quality managers, the certificate reduces validation effort and shortens qualification cycles before the caliper enters regular use on the shop floor. For procurement of ISO‑calibrated, large‑range metrology instruments, contact Metav Werkzeuge in Emmerich for purchase advice and reliable supply of the Microtech Metrology workshop digital caliper (SKU 141010256) Technical data SKU: 141010256 GTIN: 4061905038952 Manufacturer: Microtech Metrology Core technical data Measuring range: 0–1000 mm Resolution: 0.01 mm Measuring force: 1–20 N Jaw length: 300 mm Special features Colour 2.4" touchscreen Wireless + USB data output Fine adjustment mechanism Handmade measuring jaws Delivered calibrated to ISO 17025 FAQ Is the caliper calibrated for laboratory use? Yes. The workshop digital caliper from Microtech Metrology is delivered with an ISO 17025 calibration certificate, providing laboratory‑level traceability and documented measurement uncertainty. What data interfaces are available for automated documentation? The instrument offers both wireless and USB data output, enabling direct transfer of measurement values to inspection software, spreadsheets or data loggers for efficient documentation. What measurement resolution and accuracy can be expected? The display resolution is 0.01 mm; combined with the fine‑adjustment mechanism and robust jaw design the caliper supports standard workshop accuracy suitable for general machine‑shop quality control. Can the caliper reach recessed features or deep bores? The extended jaw length of 300 mm improves reach into deeper recesses and across wider components, making the instrument suitable for many large‑format inspection tasks. Is the measuring force adjustable and why does it matter? Yes; the device specifies a measuring force range of 1–20 N. Controlling contact force reduces deformation of soft materials and stabilises readings on heavy workpieces, improving repeatability. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
100mm External Measuring Jaw Insert For Digital Carbon Fibre Caliper, 8mm Beak Thickness - Metav IndustryLine
Benefit from the carbon‑fibre lightness and a precise 100 mm external measuring length that keep repeatability high and handling effortless; the low mass and rigid profile reduce measurement error for small components. Order the (M217.364.1 100 mm external jaw insert) directly via (Metav Werkzeuge) or ask our consultants if needed. M217.364.1 — Carbon‑fibre 100 mm external jaw insert for digital universal calipers (Metav IndustryLine) M217.364.1 is a dedicated external measuring jaw insert designed to convert a digital universal caliper into a lightweight, rigid tool for workshop and fine‑mechanical external measurements. Carbon‑fibre construction for low weight 100 mm external measuring length Compatible with 8 mm jaw thickness Precision oriented for workshop calipers Engineered for reproducible external measurements The carbon‑fibre construction delivers a favourable stiffness‑to‑weight ratio so that each contact requires less handling effort while preserving stability. The 100 mm measuring length is optimised for micro and workshop tasks where repeatability matters more than extended reach; the reduced mass limits deflection and vibration during contact, giving a consistent external measuring jaw that supports reliable dimensional control in serial checks. The insert is produced to fit calipers with a jaw thickness of 8 mm, ensuring a secure mechanical interface without modifying the base instrument. Ideal choice for micro‑range workshop work Classified in the micro range (up to 100 mm), this insert suits fine mechanical assemblies where compact geometry and high positional accuracy are required. The geometry and material are chosen to assist one‑handed measurement routines common in maintenance, toolmaking and small‑part inspection: the lightness shortens cycle time per measurement while the rigid profile helps maintain alignment on curved or small surfaces. Compatibility with digital universal calipers allows seamless integration into existing metrology workflows, improving throughput without the need for additional heavy fixturing. Practical durability and clear operational advantages At approximately 0.2 kg and with an overall length of 100 mm, the insert balances low weight with a robust feel for daily use. Carbon‑fibre resists corrosion and reduces the risk of surface marking compared with some metallic alternatives, supporting longer service life in mixed workshop environments. The design focusses on a single, measurable benefit per operation: faster handling and fewer retakes. For routine external checks on components, this translates directly into time savings and fewer inspection discrepancies during repetitive tasks. Contact Metav Werkzeuge to confirm fitment and secure the M217.364.1 carbon‑fibre 100 mm external jaw insert for your digital universal calipers Technical data Article number: M217.364.1 GTIN: 4054469183244 Brand: Metav IndustryLine Facts Overall length: 100 mm Weight: 0.2 kg Width: 16 mm Special features Material: carbon‑fibre Fits calipers with jaw thickness 8 mm Application: external and internal measurement compatibility Category: workshop caliper accessory FAQ Is this insert compatible with standard digital universal calipers? The insert M217.364.1 is designed for digital universal calipers and fits models with a jaw thickness of 8 mm; compatibility should be confirmed against the caliper jaw profile. Does the insert include a calibration certificate? This accessory is supplied as a measuring jaw insert; no dedicated calibration certificate is included unless explicitly stated on the product page. What advantages does carbon‑fibre offer for measurement jaws? Carbon‑fibre reduces mass while maintaining rigidity, improving handling speed and reducing bending during contact, which benefits repeatability for workshop checks. Can the insert be used for internal measurements as well as external? The design primarily addresses external measurement tasks, though the overall geometry may support certain internal measurement workflows when paired with a suitable caliper. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
100mm Insert for Internal Groove Measurement for Digital Carbon Fibre Caliper, 8mm Jaw Thickness - Metav IndustryLine
Take advantage of precise internal groove measurement with a lightweight, carbon-fibre construction and straightforward compatibility with digital workshop calipers; the accessory ensures stable readings in confined spaces. Order the insert directly via Metav Werkzeuge or consult our specialists for application advice. M217.367 — Insert for internal-groove measurement, 100 mm, carbon-fibre (Metav IndustryLine) A M217.367 insert engineered for accurate internal groove measuring on digital workshop calipers, offering a 100 mm measuring length and compatibility with 8 mm jaw thickness. 100 mm measuring insert for internal grooves Carbon-fibre construction for low thermal drift Compatible with calipers having 8 mm jaw thickness Lightweight 0.2 kg for easy handling Precision where space is limited The accessory converts a standard caliper into a specialised tool for internal groove measurement, enabling reliable checks in narrow bores and channels. Built from carbon-fibre, the insert reduces thermal expansion compared with metallic alternatives, which supports measurement stability during routine workshop use. With a 100 mm measuring length, the component is particularly suited to confined workpieces where repeatable positioning matters. The lightweight design keeps inertia low and simplifies one-person operation while maintaining a steady reference for the caliper sensor. Designed for repeatable workshop measurements The adapter fits to digital universal workshop calipers with a jaw thickness of 8 mm, providing a solid mechanical interface that keeps alignment consistent across successive measurements. Its 0.2 kg mass combines handling convenience with enough substance to avoid unwanted movement during contact measurement. Being an accessory for digital calipers, the part preserves the display resolution and electronic readout of the host instrument, allowing the user to retain the precision benefits of electronic measurement without adapting the measuring routine. Practical integration into quality workflows Classified for compact, micro-range applications up to 100 mm, this insert is ideal for workshop quality control tasks where internal grooves, slots and recesses must be verified quickly and reliably. The accessory supports straightforward inspection routines and fits seamlessly into inspection benches and portable measuring setups. For production environments that demand reproducible checks of groove geometry, the combination of carbon-fibre construction and purpose-shaped measuring faces reduces environmental influence and helps standardise results across shifts. For groove-specific measuring tasks, choose the Metav IndustryLine M217.367 insert and contact Metav Werkzeuge in Emmerich for tailored advice or ordering: info@metav-werkzeuge.com / +49 2822 7131930 Technical Data Article number: M217.367 GTIN: 4054469183275 Manufacturer: Metav IndustryLine Facts Measuring length: 100 mm Measuring range minimum: 50 mm Weight: 0.2 kg Jaw thickness compatibility: 8 mm Width: 16 mm Special features Carbon-fibre construction Application: internal measurement Suitable for digital workshop calipers Category: workshop caliper accessory FAQ How is the insert mounted to a caliper? The M217.367 insert is designed to sit on calipers with an 8 mm jaw thickness, forming a secure mechanical interface that aligns the measuring faces for internal groove checks. Can the insert remain attached during general measurements? The accessory is intended for dedicated internal groove tasks; while attachment is mechanically stable, removal is recommended when performing standard outside measurements to avoid interference. Which caliper types are compatible with this accessory? Compatibility is with digital universal workshop calipers featuring an 8 mm jaw thickness; the insert preserves the caliper’s electronic readout and measuring functionality. Is the insert suitable for measuring deep slots and narrow grooves? Yes, the 100 mm measuring length and narrow profile make the accessory suitable for confined grooves and slots where direct access is limited. Does the carbon-fibre construction affect measurement stability? Carbon-fibre reduces thermal expansion compared with many metals, supporting more stable results in varying workshop temperatures when used with the caliper’s electronic display. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
100mm Outside Measurement Tip Attachment For Carbon Fiber Digital Caliper, For 8mm Beak Thickness - Metav IndustryLine
Extend caliper reach with a 100 mm external measuring point that fits a jaw thickness of 8 mm and weighs just 0.2 kg; the result is improved access to small external features and steadier handling during repetitive checks. Order the attachment directly via Metav Werkzeuge or consult our specialists for application advice. M217.365 External measurement point attachment, 100 mm — Metav IndustryLine The M217.365 is a 100 mm external-measurement tip attachment for digital universal calipers, designed to access small outer diameters and features where a pointed contact is required. 100 mm measuring tip for external measurements Compatible with 8 mm caliper jaws Lightweight design, approx. 0.2 kg Reach small features with assured repeatability The precision tip expands the practical use of a workshop caliper without compromising handling: the 100 mm length gives extended reach for recessed or awkwardly positioned external surfaces, while the pointed end allows contact with narrow profiles and small radii. Fitting as an accessory to a digital universal caliper, the attachment makes previously difficult measurements straightforward, reducing repositioning and the associated variability. The focused design supports efficient measuring routines in assembly and inspection tasks where speed and repeatability matter. Easy integration and balanced handling for everyday use Designed to seat on caliper jaws with a 8 mm thickness, the attachment mounts quickly and remains stable throughout manual measurements. At just 0.2 kg, the accessory minimises added mass and prevents excessive cantilevering that could otherwise affect measurement stability. The simple mechanical interface keeps the digital display behaviour unchanged, so measurement readouts remain the authoritative source. This combination of compatibility and light construction aids productivity in busy workshops and on the shop floor. Workshop-ready accessory that complements digital calipers As a purpose-made external measurement tool for workshop calipers, the attachment is tailored to practical trade use: it is compact to store, quick to fit, and focused on a single function—precise external contact with a pointed tip. For operations that rely on rapid checks or need an occasional extended reach without purchasing a longer main caliper, this accessory provides a cost-effective option. The Metav IndustryLine origin signals supply chain reliability and a European quality filter that supports consistent availability and dependable service. Contact Metav Werkzeuge today to specify the right attachment for the calipers in use or to discuss fitting options for your measuring setup Technical Data SKU: M217.365 GTIN: 4054469183251 Manufacturer: Metav IndustryLine Facts Total length: 100 mm Weight: 0.2 kg Suitable jaw thickness: 8 mm Special features Application: external measurement with pointed tip Compatible with digital universal calipers made of carbon fibre Category: workshop caliper accessory FAQ Is the attachment compatible with standard digital calipers? The attachment is designed for use with digital universal calipers and fits jaws with a thickness of 8 mm; compatibility with a specific caliper model should be checked against the jaw profile and fixing method. Which measurement tasks is the tip intended for? The pointed tip is intended for external measurements on narrow edges, small diameters and recessed outer features where a standard jaw face would not reach; the 100 mm length provides added access without replacing the main caliper. How is the attachment mounted and secured? Mounting is mechanical to caliper jaws of 8 mm thickness; the design keeps the digital readout functionally unchanged while providing a stable contact point for external checks. Does this accessory affect the caliper's accuracy? The accessory provides a precise contact point, but overall measurement accuracy depends on the base caliper and the measuring procedure. The attachment is an aid to access and repeatability rather than a standalone calibrated instrument. What are the identifying codes for ordering? Order reference: SKU M217.365; GTIN 4054469183251. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1200mm Workshop Caliper With Long Jaws, Fine Adjustment Monoblock, Hardened Stainless Steel, 0.05mm Resolution - Metav IndustryLine
Take advantage of a long-range, workshop-grade measuring instrument that combines a 1,200 mm measuring range, fine-adjustment thumbwheel and a monoblock construction for repeatable, rigid measurements; delivered in a protective transport case for safe handling. Order the caliper directly via Metav Werkzeuge or consult our specialists for integration into production workflows. Workshop caliper with tips M201.345.1 — 1,200 mm range, fine adjustment (Metav IndustryLine) A Workshop caliper with tips M201.345.1 designed for long-format measurement tasks in fixture and mould assembly, offering robust construction and precise vernier readings for mixed imperial/metric work Long 1,200 mm measuring range Hardened stainless steel construction Fine-adjustment thumbwheel Delivered in protective transport case Precision where reach matters This long-format caliper provides a 1,200 mm measuring range, addressing the needs of larger assemblies without sacrificing measurement quality. The monoblock design increases rigidity along the beam so that longer measurements remain reproducible, while the hardened stainless steel beam with a matt-chrome scale resists wear and reduces reflection for clearer reading. For workshops that measure large housings, tooling plates or long shafts, the increased beam stiffness translates into fewer re-measurements and more reliable production control. Clear vernier readings for mixed systems Equipped with a classical vernier layout — 1/128" (top) and 1/20 mm (bottom) — the instrument offers both imperial and metric reading options. The metric vernier corresponds to a mechanical resolution of 0.05 mm, matching industrial expectations for analogue calipers and enabling consistent part inspection. The dual-scale arrangement simplifies cross-referencing drawings and legacy specifications without converting units electronically, making the caliper especially practical where both standards are still in use. Fine adjustment and practical jaw geometry A dedicated fine-adjustment thumbwheel grants controlled approach and precise settling on the measured surface, reducing overshoot and operator-induced variability during closing. The 300 mm jaw length supports firm engagement on long or irregular parts and the presence of measuring tips extends the instrument’s utility for probing recesses and stepped geometries. Together, these features reduce setup time and improve confidence in each reading, particularly during repetitive quality-control tasks. Built for workshop life and conformity Manufactured for everyday use, the instrument follows DIN 862 for standard jaw dimensions up to 200 mm and is produced to factory standard for larger jaw lengths such as the 300 mm jaws fitted here. The robust finish and construction suit the demands of metalworking environments; the caliper is supplied in a protective transport case to safeguard the tool during storage and transport between workstations. The analogue format keeps operation simple and durable, with minimal maintenance compared with electronic systems. Contact Metav Werkzeuge today to arrange supply of the Metav IndustryLine workshop caliper and to discuss how this long-range measuring instrument can support precise, repeatable inspection in your production or tooling environment. Technical data SKU: M201.345.1 GTIN: 4054469101910 ECLASS: 21170344 Customs tariff number: 90173000 Facts Measuring range: 1,200 mm Jaw length: 300 mm Resolution (metric): 0.05 mm Nonius/vernier: 1/128" (top) / 1/20 mm (bottom) Special features Monoblock construction Fine-adjustment thumbwheel Hardened stainless steel with matt-chrome scale With measuring tips for recess/stage measurement Delivered in protective transport case Analogue vernier for imperial and metric readings Conforms to DIN 862 for jaw lengths ≤ 200 mm; factory standard for larger jaws FAQ What measuring range does this caliper cover? The caliper covers a measuring range of 1,200 mm, making it suitable for long components and larger assemblies. What resolution and scales are available on the instrument? The instrument uses vernier scales with 1/128" on the top and 1/20 mm on the bottom, providing a metric resolution of 0.05 mm for standard analogue measurements. Is the caliper suitable for heavy workshop use? Yes, the caliper is built from hardened stainless steel with a matt-chrome scale, a monoblock beam and a protective transport case to withstand workshop conditions. Does the caliper support imperial and metric specifications? Yes, the dual vernier layout enables direct reading in both imperial (inches) and metric (millimetres) without conversion tools. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1200mm Workshop Caliper With Points 200mm Jaws 0.05mm Vernier, Hardened Stainless Steel Monoblock, Fine Adjustment, Supplied In Case - Metav IndustryLine
Take advantage of the combination of long measuring range, robust monoblock construction and precise 0.05 mm graduation for reproducible workshop measurement results; order directly via Metav Werkzeuge or ask our consultants for application advice. Workshop Caliper with Tips M201.345 — Monoblock vernier caliper, 1,200 mm range, 0.05 mm The Workshop Caliper with Tips M201.345 is a long-range, workshop-grade vernier caliper designed for large components and fixture work, combining a rigid monoblock beam with a fine-adjustment spindle for repeatable setting and safe handling. 1,200 mm measuring range for large components Monoblock construction in hardened stainless steel Fine-adjustment spindle for precise positioning Measure large assemblies with reliable rigidity The long 1,200 mm range places this caliper in the long-format class for workshop measuring, where beam stiffness and reproducibility are decisive. The monoblock design reduces flex along the beam, so measurements taken over greater spans remain consistent. This construction is particularly advantageous when checking long rails, frames or large housings where repeatable external dimensions are required. The vernier implementation keeps the instrument independent of electronics and immediately usable at the bench. Precision that matches workshop practice With a 0.05 mm graduation and vernier scales—1/128 inch on the upper scale and 1/20 mm on the lower—the caliper provides the industry-standard analogue resolution for mechanical workshops. This level of resolution corresponds to established workshop tolerances under DIN 862, offering a clear, verifiable basis for pass/fail decisions in production. The integrated fine adjustment spindle simplifies the alignment of the jaws, reducing setting errors and speeding up repetitive checks. Built to withstand daily use Materials and finishing prioritise longevity: the beam and jaws are made from hardened stainless steel with a matt-chromed scale for low-reflectivity reading and corrosion resistance in demanding shop environments. The caliper’s jaw geometry includes dedicated tips for stable contact on larger parts, while the robust slide mechanism resists wear—attributes that reduce downtime and maintenance costs over the life of the tool. Practical delivery and workplace integration The instrument is supplied ready for workshop use and comes packaged in a protective transport case for safe handling and storage between jobs. As an analogue vernier caliper, it requires no batteries and can be used in settings where electronics are undesirable. The combination of large measuring range, mechanical reliability and fine-adjustment control supports faster set-ups, fewer re-measurements and a smoother inspection workflow in everyday machine‑shop tasks. For dependable long-range workshop measurement from the Metav IndustryLine, contact Metav Werkzeuge to request the M201.345 or discuss suitability for specific components — eMail: info@metav-werkzeuge.com / Tel: +49 2822 7131930 Technical data Article number: M201.345 GTIN: 4054469101903 eCl@ss: 21170344 Model label: Workshop Caliper with Tips 1200x200x0.05mm SKU: M201.345 Core figures Measuring range: 1,200 mm Jaw length: 200 mm Resolution / graduation: 0.05 mm Tariff number: 90173000 Special features Monoblock construction Material: hardened stainless steel, matt‑chromed scale Fine-adjustment spindle Analogue vernier scales: 1/128" (top) and 1/20 mm (bottom) Conforms to DIN 862 for relevant jaw lengths Delivered in a transport case With tips for stable contact FAQ What measuring range does this caliper cover? The Workshop Caliper with Tips M201.345 covers a measuring range of 1,200 mm, making it suitable for long-format workshop components. How fine is the graduation and what accuracy can be expected? The analogue graduation is 0.05 mm; as an analogue instrument this corresponds to the standard industrial resolution recommended under DIN 862. Is the caliper suitable for harsh workshop environments? Yes, the caliper is made from hardened stainless steel with a matt‑chromed scale and is supplied in a transport case to protect it between jobs. Does the instrument include a fine-adjustment feature? The M201.345 is equipped with a fine-adjustment spindle to permit precise jaw positioning and quicker repetitive checks. Which vernier scales are fitted to the caliper? The instrument features vernier scales of 1/128 inch on the upper scale and 1/20 mm on the lower scale for flexible reading in either imperial or metric references. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1200mm Workshop Caliper Without Probe Fine Adjustment For Outer, Inner And Step Measurements, Hardened Stainless Steel In Case - Metav IndustryLine
This long-range caliper combines a stainless, hardened measuring beam, a monoblock design and an accurate vernier for reliable workshop measurement. Benefit from fine-adjustment control and a 300 mm jaw length for stable clamping of larger components; order the caliper directly via Metav Werkzeuge or ask the consultants for application advice. Metav IndustryLine Workshop Caliper without Tip — 0–1200 mm, 0.02 mm Vernier A Metav IndustryLine Workshop Caliper without tip designed for long-range, heavy-duty workshop measurement and equipped for external, internal and step gauging in machinist environments. Hardened stainless steel construction Fine adjustment for precise setting Monoblock beam for high rigidity Dual vernier: 0.02 mm resolution Long-range stability for large components The caliper is engineered as a long-range measuring instrument with a 0–1200 mm span, placing it in the long-category for workshop calipers where reach and stiffness matter. The monoblock beam reduces torsion and improves reproducibility across the full measuring length, which means fewer re-measurements and higher throughput in repetitive tasks. This construction is particularly useful when checking large housings, long shafts or assembly fixtures where consistent guidance and minimal deflection are decisive for process reliability. Precise readout and controlled setting reduce operator error Measurement is effected via an analogue vernier with a 0.02 mm resolution (dual-scale format), offering familiar, robust readout without electronics. The integrated fine adjustment mechanism allows slow, controllable closure of the jaws for accurate positioning and repeatable results, while the dual vernier markings provide direct comparison between metric and inch indications. Together, the fine adjustment and vernier reduce typical human-introduced variation and support fast, confidence-led decisions on the shop floor. Practical handling features for workshop use Large 300 mm jaws facilitate secure contact on broader workpieces and hold alignment under clamping pressure. The caliper’s stainless, hardened material with a matt‑chrome scale improves scratch resistance and maintains legibility in challenging ambient conditions. The unit follows factory standards for production use and is supplied ready for immediate deployment in inspection benches or production cells. For shops requiring durable, mechanical measuring tools that avoid electronic service issues, this instrument provides a durable, low-maintenance solution. Application focus and efficiency gains Designed for external, internal and step measuring tasks, this caliper supports common workshop controls and fixture checks without the complexity of digital interfaces. Its robust build and precise adjustment translate into fewer stoppages and consistent part acceptance rates, which contributes directly to process efficiency. For production environments that prioritise mechanical reliability and simple verification procedures, the instrument is a practical, cost-efficient choice. Contact Metav Werkzeuge for tailored procurement advice on the Metav IndustryLine long-range caliper (SKU M201.317) and to confirm suitability for specific applications; Metav’s consultants in Emmerich are available to support selection and delivery. Technical Data Article number: M201.317 GTIN: 4054469101361 Weight: 8.3 kg Material: stainless steel, hardened; matt-chromed scale Measuring range: 0–1200 mm Facts Jaw length: 300 mm Resolution: 0.02 mm Vernier: 1/1000" top and 1/50 mm bottom Type: Analogue vernier caliper Norm: Werksnorm Special features Monoblock construction Fine adjustment for controlled measuring Suitable for external, internal and step measurements Long-range workshop classification FAQ What measuring range does this caliper cover? The Metav IndustryLine workshop caliper covers a measuring range of 0–1200 mm, suitable for long-range workshop and assembly measurements. How fine is the resolution and how is it read? Resolution is 0.02 mm, provided by the dual vernier (1/1000" top, 1/50 mm bottom) for clear analogue reading on the scale. Is the caliper suitable for heavy-duty workshop use? Yes; the hardened stainless steel beam and monoblock design ensure robustness and reduced torsion for demanding workshop environments. Which measurement types are possible with this instrument? The tool supports external, internal and step measurements as standard workshop functions. What is the article/supplier reference for ordering? Order using SKU M201.317 (Metav IndustryLine workshop caliper). Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1200mm Workshop Caliper Without Tips Fine Adjustment Monoblock Hardened Stainless Steel 0.05mm, 300mm Jaws - Metav IndustryLine
Take advantage of the 0–1200 mm measuring range, the monoblock hardened stainless‑steel construction and the precise fine‑adjustment mechanism for reliable, repeatable shop measurements; order the caliper directly via Metav Werkzeuge or consult Metav specialists for application matching. Workshop Caliper M201.350.1 — 0–1200 mm, Fine Adjustment, Monoblock (Metav IndustryLine) The Workshop Caliper M201.350.1 is a monoblock stainless‑steel caliper designed for robust shop use and long‑range measurements up to 1,200 mm, suitable for external, internal and step gauging in machine and tool rooms. *0–1200 mm measuring range for large components *Monoblock hardened stainless steel construction *Fine adjustment for reproducible positioning *Dual vernier scales: 1/128" and 1/20 mm resolution Reliable long‑range measurement with sustained stiffness The caliper’s 0–1200 mm range places it in the long‑range category for workshop measuring tools, making it appropriate for larger fixtures, housings and assemblies where single‑handed instruments must still offer good stiffness. The monoblock construction reduces flex and gives a stable reference over the full travel, which translates into fewer remeasurements and higher process throughput. This long‑range format balances reach and control, so larger components can be measured with consistent results in routine production and maintenance tasks. Precise setting and repeatability for everyday shop use Measurement reproducibility is supported by the mechanical vernier arrangement: the bottom scale presents a 1/20 mm division (mechanical resolution ≈ 0.05 mm), while the top scale gives imperial subdivisions at 1/128" — a practical dual‑scale solution for mixed‑unit environments. The integrated fine adjustment lets the operator micro‑position the jaws before taking a reading, reducing over‑travel and measurement scatter. For jaw lengths up to 200 mm, compliance is to DIN 862; for longer jaw assemblies the instrument follows the manufacturer’s production norm, which is customary for extended‑length instruments. Built for durability and clear reading in the workshop Manufactured from hardened stainless steel with a matt‑chromed scale, the instrument resists corrosion and maintains legibility under workshop lighting. The matt chrome finish reduces glare while protecting the graduation against wear, supporting faster reading and fewer interpretation errors during shift work. The robust material choice and hardened surfaces extend service life and sustain measurement quality under the mechanical stresses typical of industrial environments. Practical applications and handling benefits This caliper suits machine shops, toolrooms and fabrication shops that require a single instrument to cover external, internal and step measurements on larger parts. The long jaw length (300 mm) enables access to deeper recesses and wider diameters without auxiliary fixtures, while the monoblock profile and fine‑setting control promote repeatable positioning on mating surfaces. As a durable analogue instrument, it integrates easily into inspection benches and routine quality checks where straightforward, reliable dimensional data are needed. Contact Metav Werkzeuge for detailed technical advice on the Metav IndustryLine Workshop Caliper M201.350.1 and to arrange prompt delivery from Emmerich. Technical data Article number: M201.350.1 GTIN: 4054469101934 ECLASS: 21170344 Manufacturer: Metav IndustryLine Core specifications Measuring range: 0–1200 mm Jaw length: 300 mm Resolution (nonius): 1/128" (top), 1/20 mm (bottom) Construction: Monoblock Special features Material: Hardened stainless steel, matt‑chromed scale Fine adjustment mechanism Conforms to DIN 862 for jaw lengths ≤200 mm; factory norm for ≥250 mm Flat‑jaw configuration (without pointed measuring tips) Analog vernier instrument FAQ What measuring range does the caliper cover? The Workshop Caliper M201.350.1 covers a measuring range of 0–1200 mm, intended for larger components and long‑reach inspection tasks. What resolution and scales are provided? The instrument uses dual vernier scales: 1/20 mm on the lower scale (≈0.05 mm resolution) and 1/128" on the upper scale, enabling metric and imperial readings as required. Is the caliper suitable for heavy‑duty workshop use? Yes. The monoblock design and hardened stainless‑steel construction make the caliper robust for routine shop environments and repetitive measurement procedures. Which standards apply to this caliper? For jaw lengths up to 200 mm the device complies with DIN 862; for longer jaw assemblies the instrument follows the manufacturer’s norm, which is specified for extended‑length versions. Which types of measurement can be performed with this tool? The caliper supports external, internal and step measurements and is intended for general workshop dimensional checks on housings, fixtures and large components. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1200mm Workshop Caliper Without Tips Monoblock Fine Adjustment 0.05mm Resolution 200mm Jaws Supplied in Case - Metav IndustryLine
Combine long measuring range, rigid monoblock construction and a precision fine‑adjustment for reliable, reproducible measurements on large components; order the caliper directly via Metav Werkzeuge or ask our consultants for application advice. Workshop Vernier Caliper M201.350 — long‑range analogue caliper with fine adjustment The Workshop Vernier Caliper M201.350 is a long‑range, monoblock analogue caliper designed for robust workshop use and measurement of large components in metalworking and toolmaking. 1,200 mm measuring range Hardened stainless steel body Precision fine‑adjustment screw Supplied in transport case Built for long‑range, reproducible measurement This instrument is engineered as a monoblock construction to maintain profile stiffness across its full span, which supports reproducible measurements on larger workpieces. With a measuring range of 0–1,200 mm, the caliper falls into the long‑range class commonly required for heavy machining, fixture and housing inspection; the extended range reduces the need for multiple measuring tools and shortens setup times. The structural rigidity and the matt‑chrome scale combine to limit deflection and improve readout consistency on long measurements. Precise mechanical reading and controlled adjustment Reading is achieved with a dual vernier system: 1/128" on the upper scale and 1/20 mm on the lower scale, equivalent to a mechanical resolution of 0.05 mm, which corresponds to the industrial standard for analogue workshop calipers. The integrated fine‑adjustment screw permits cautious approach and exact positioning of the jaws, reducing overshoot and operator‑induced scatter. For jaw lengths up to 200 mm this model complies with DIN 862, ensuring the measured values meet common workshop tolerance expectations and are easy to document during routine quality checks. Robust materials and workshop‑ready design Materials and surface finish are chosen for day‑to‑day resilience: hardened stainless steel body with a matt‑chromed scale resists corrosion and glare while the hardened jaws keep wear‑induced errors low. The monoblock setup minimises moving‑part looseness and enhances long‑term stability. For practical handling, the caliper is supplied in a transport case suitable for workshop logistics, protecting the instrument during transit and storage and simplifying on‑site handling when instruments are moved between benches or machines. Integration into the workshop and supplier assurance The instrument is aimed at workshops and industrial environments where long reach and mechanical reliability matter more than electronic outputs. It suits layout work, inspection of large housings and fixtures, and incoming material checks where a rugged analogue solution is preferred. Metav IndustryLine provides this caliper as part of a comprehensive supply approach: central stock and experience from Emmerich help ensure steady availability and consistent quality control. For specialised applications or clarification on fit‑for‑purpose, Metav Werkzeuge’s consultants are available to advise on suitable measuring strategies and complementary tools. Contact Metav Werkzeuge today for application guidance or to arrange supply of the Metav IndustryLine Workshop Vernier Caliper M201.350 and benefit from direct, workshop‑focused expertise Technical data Article number: M201.350 GTIN: 4054469101927 ECLASS: 21170344 Tariff number: 90173000 Facts Measuring range: 0–1,200 mm Jaw length: 200 mm Resolution: 0.05 mm (1/20 mm vernier) Vernier: 1/128" (upper), 1/20 mm (lower) Standard: DIN 862 for jaw length up to 200 mm; factory norm above 250 mm Special features Material: hardened stainless steel with matt‑chrome scale Monoblock construction Fine‑adjustment screw for precise closing Analogue vernier caliper (mechanical) Supplied in transport case FAQ What measuring range does this caliper cover? The Workshop Vernier Caliper M201.350 covers a measuring range of 0–1,200 mm, making it suitable for long‑reach workshop measurements and component inspection. How fine is the reading and what vernier scales are used? Reading is mechanical via dual verniers: 1/128" on the upper scale and 1/20 mm on the lower scale, giving a resolution of 0.05 mm consistent with workshop standards. Is the caliper suitable for heavy workshop use? Yes; the caliper’s monoblock construction and hardened stainless steel body provide the rigidity and wear resistance expected for demanding workshop environments. Does the instrument comply with recognised standards? For jaw lengths up to 200 mm the caliper conforms to DIN 862; values for larger jaws follow the manufacturer’s factory norm as indicated in the technical data. What is included with delivery? The caliper is supplied in a transport case to protect the instrument during handling and storage; the case supports safe workshop logistics and transit. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
120mm Long 5mm Diameter Scribing and Measuring Tip for Caliper Adapter - Metav IndustryLine
Take advantage of the combination of extended reach, a precise 5 mm tip and lightweight handling for accurate workshop marking and repeatable measurements; order the accessory via Metav Werkzeuge or contact our consultants for application advice. Measuring and scribing tip M240.320.1 — long 5 mm Ø scribing accessory by Metav IndustryLine The Measuring and scribing tip M240.320.1 is a long, 5 mm Ø marking probe designed for use with caliper measuring adapters, delivering extended reach for marking and measurement tasks in workshop metrology and production inspection Long 5 mm tip for extended reach Precision marking for workshop metrology Lightweight 0.05 kg for minimal deflection Extended reach for precise marking A long, slim scribing probe provides access to recesses and hard-to-reach edges that standard caliper jaws cannot reach. The combination of a 5 mm diameter tip and a 120 mm overall length reduces the need for repositioning, so marking and measuring steps are faster and more consistent. For tasks where a clear line or centre mark is required before machining, the extended probe shortens cycle times while keeping the marking position steady. Stable alignment and repeatable results Geometry and mass distribution matter for repeatability: a slender probe with a low mass produces less bending and inertia during handling. At approximately 0.05 kg, the tip keeps the overall tool balance favourable, reducing measurement variation caused by deflection. When used with a caliper adapter, the design supports repeatable alignment between the caliper and the workpiece, which is critical for serial marking and when multiple setups must match. Seamless integration with caliper adapters The accessory is intended for mechanical calipers and mounting adapters commonly used in shop environments. Its form factor is compatible with standard caliper adapter fittings, enabling quick attachment and removal without modification. This compatibility makes the probe suitable for marking, centre-punch transfer, and preparatory checks directly from a caliper-based setup, streamlining workflows where a separate marking tool would otherwise be required. Robust for routine workshop use Built as a straightforward shop-floor accessory, the probe focuses on function and durability rather than unnecessary complexity. The simple, analogue nature makes it easy to maintain and to incorporate into existing measuring routines. For workshops that value efficient fixturing and minimal handling overhead, the tip delivers practical benefits: less time aligning, more time machining, and fewer measurement interruptions. Choose the Metav IndustryLine long measuring and scribing tip for reliable extended-reach marking and order it through Metav Werkzeuge; for specification questions or application guidance contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: M240.320.1 GTIN: 4054469159539 Article: Measuring and scribing tip for caliper adapter, long Ø 5 mm, length 120 mm Core measurements Tip diameter: 5 mm Overall length: 120 mm Weight: 0.05 kg Customs tariff number: 90178090 Features and compatibility Accessory for calipers / caliper adapter mounting Analogue scribing / marking probe Category: Accessories (Measuring devices → Accessories) Brand: Metav IndustryLine FAQ Is the tip compatible with standard caliper adapters? The Measuring and scribing tip M240.320.1 is designed for use with standard caliper measuring adapters and fits common adapter fittings used in workshop metrology. What is the diameter of the scribing tip? The tip has a diameter of 5 mm, which provides a fine but robust contact point for marking and alignment tasks. How long is the probe and how heavy is it? The probe measures 120 mm in overall length and weighs approximately 0.05 kg, offering extended reach with minimal added mass. Can this accessory be used for repetitive marking operations? Yes. The probe’s shape and low mass reduce deflection, supporting repeatable marking and consistent transfer measurements in serial workflows. Is the accessory suitable for use directly on the shop floor? The M240.320.1 is intended as a practical workshop accessory: simple, robust and easy to mount for routine marking and preparatory measurement tasks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1250mm Workshop Caliper 0.05mm Resolution Monoblock Stainless Steel Matt Chrome Scale Fine Adjustment, Supplied in Case - Metav IndustryLine
Take advantage of the combination of long-range measurement capability, a rigid monoblock construction and fine vernier control for dependable workshop dimensioning; order the caliper directly via Metav Werkzeuge or consult our specialists for application advice. Workshop Caliper M201.351 — 1,250 mm monoblock caliper, hardened stainless steel The Workshop Caliper M201.351 is a long-range, monoblock analogue caliper engineered for large workshop and fixture measurements, combining robust construction with precise vernier reading for reliable, repeatable checks. *Monoblock design for high rigidity *1,250 mm measuring range for long parts *Stainless hardened construction with matt chrome scale *Fine adjustment and 0.05 mm vernier resolution Built for long-span workshop measurements with minimal flex The instrument is designed as a monoblock caliper with a cross-section of 31 x 10 mm, which increases profile stiffness across its full length and reduces deflection when measuring long or heavy components. Classified in the Long range (1,000–2,000 mm), the 1,250 mm measuring span suits large assemblies, fixtures and profiles where single‑pass checks improve throughput. The substantial jaw geometry and monoblock beam support reproducible positioning, making this tool a practical choice for heavy‑duty workshop measurement tasks. Analogue precision that meets workshop standards This analogue instrument employs vernier scales (1/128" on the top scale and 1/20 mm on the bottom scale) to provide a readable resolution of 0.05 mm, matching industrial expectations for mechanical calipers. With a jaw length of 200 mm, the measuring faces and vernier comply with DIN 862, ensuring measurement behaviour conforms to recognised workshop standards. The integrated fine adjustment mechanism enables controlled closing of the jaws for repeatable readings, while the matt‑chromed scale reduces glare and facilitates accurate visual interpretation. Durable materials, ergonomic handling and safe transport Constructed from stainless steel that has been hardened, the caliper is finished with a matt chrome graduation for long term legibility and resistance to workshop wear. The 200 mm jaw length balances reach and handling: long enough for many workpieces yet short enough to remain manageable for single‑person use. Delivery in a transport case provides protection during storage and transit, and the robust beam profile supports frequent daily use in metalworking environments. Routine care—light lubrication of the slide and clean storage in the supplied case—preserves measurement integrity. Contact Metav Werkzeuge to discuss integrating the M201.351 monoblock long-range caliper into your inspection routine or to request delivery and technical details from our Emmerich warehouse Technical Data Article number: M201.351 GTIN: 4054469182315 Brand: Metav IndustryLine Facts Measuring range: 0–1,250 mm Jaw length: 200 mm Cross-section: 31 x 10 mm Resolution: 0.05 mm Vernier scales: 1/128" (top), 1/20 mm (bottom) Applicable standard: DIN 862 (jaw length 200 mm) Special features Monoblock beam for increased rigidity Fine adjustment for controlled measurement Material: hardened stainless steel, matt‑chrome scale Supplied in a transport case for safe handling Analogue (vernier) configuration FAQ How accurate is the Workshop Caliper M201.351 for routine inspection tasks? The Workshop Caliper M201.351 provides a vernier resolution of 0.05 mm and, with its DIN 862 conformity at the 200 mm jaw length, is suited to standard workshop accuracy requirements and repetitive dimensional checks. Which measurement tasks can be performed with this caliper? This analogue caliper performs external, internal and step measurements using the jaw faces and stepped surfaces; the fine adjustment aids precise closure for repeatable external readings. Is the M201.351 suitable for heavy workshop environments? Yes. The monoblock construction and hardened stainless steel beam are designed to withstand daily use in metalworking shops and fixture assembly areas while maintaining dimensional stability over long spans. Does the caliper come with a calibration certificate? The product data do not indicate an ISO 17025 calibration; please contact Metav Werkzeuge if a traceable calibration certificate is required for the Workshop Caliper M201.351. What protective measures are included for transport and storage? The caliper is supplied in a transport case to protect the beam and jaws during handling and storage; regular cleaning and light lubrication are recommended to maintain the scale and sliding surfaces. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
13mm Internal Groove Measuring Insert For Caliper Adapter 1.2mm Width - Metav IndustryLine
Take precision where space is restricted: the combination of compact design, a secure Ø5 mm shank interface and defined groove geometry allows reliable, repeatable internal-groove checks from 40 mm. Benefit from a lightweight 70 mm probe that minimises operator fatigue and keeps set-up fast. Order the internal-groove measuring insert directly via Metav Werkzeuge or ask our consultants if needed. Internal groove measuring insert M240.326 — caliper adapter probe, 1.2 mm width (Metav IndustryLine) The Internal groove measuring insert M240.326 is a specialist measuring tip for use with caliper adapters, engineered to inspect internal grooves from 40 mm with a maximum depth of 13 mm and a nominal groove width of 1.2 mm. For internal grooves from 40 mm Max groove depth 13 mm Groove width 1.2 mm Ø5 mm shank for adapter Lightweight 50 g Accurate groove measurement where space is limited The insert converts a standard caliper into a dedicated groove probe, allowing precise checks of recesses without the need for larger, more complex fixtures. With a defined groove width 1.2 mm and a max groove depth 13 mm, the tip delivers repeatable contact geometry that reduces measurement scatter and improves comparability between readings. The geometry is optimised to sit securely in the groove flank so that a single, controlled contact produces a verifiable reading rather than a variable result caused by inconsistent probing angles. Secure mounting and repeatable handling for fast inspection cycles A Ø5 mm shank ensures a tight, wobble‑free connection to compatible caliper adapters, while the 70 mm length gives enough reach for most assemblies without sacrificing stiffness. The low weight (0.05 kg) makes handling light and reduces the effect of operator force during manual measurement. Together these attributes support short set‑up times and repeatable positioning, which is particularly valuable for batch inspections and spot checks on the production line. Practical use cases and workshop advantages Designed as an accessory for inspection and quality control, the probe is suitable for groove verification in components and assemblies where access is restricted. The compact measuring tip is ideal for checking grooves in housings, bearing seats and small machined components. As an accessory class product within the metrology toolkit, it complements standard calipers and adapters to extend measuring capability without the need for dedicated groove gauges, helping to keep the tool inventory efficient and adaptable. Contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or +49 2822 7131930 to confirm adapter compatibility and arrange supply of the M240.326 internal groove insert Technical data Article number: M240.326 GTIN: 4054469159584 Category: Accessories Tariff number: 90178090 Core measurements Length: 70 mm Weight: 0.05 kg Shank diameter: Ø5 mm Max groove depth: 13 mm Groove width: 1.2 mm Special features For internal grooves from 40 mm Intended for use with caliper adapters Analog accessory for manual inspection Lightweight probe for reduced handling fatigue FAQ What groove dimensions can this insert measure? The insert is designed for internal grooves from 40 mm in diameter, with a maximum depth of 13 mm and a nominal groove width of 1.2 mm; these parameters define the intended measurement range for the M240.326. Which adapters and calipers are compatible? Compatibility is achieved via the Ø5 mm shank interface; the insert fits standard caliper adapters that accept a Ø5 mm probe shank and is intended for manual caliper-based inspection setups. How does the insert improve repeatability compared with ad‑hoc probing? By providing a defined contact geometry and a stable Ø5 mm connection, the probe reduces lateral play and inconsistent contact angles, leading to more repeatable readings during routine checks. What applications are typical for this measuring tip? Typical uses are groove inspection in housings, bearing seats and small machined components where access is limited and a compact, repeatable measuring tip is required for quality control. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1500mm Digital Caliper 200mm Jaws Fine Adjustment Stainless Steel, Factory Standard 0.11mm, with ON/OFF mm/inch HOLD PRESET - Metav IndustryLine
Take advantage of a long 1,500 mm measuring range, hardened stainless steel construction and a digital readout with RB 5 data output to speed up large-part inspections while keeping reproducibility high. Order the instrument directly via Metav Werkzeuge or request advice from our consultants for production-ready measurement solutions. Digital Caliper M217.056 — 1,500 mm long-range caliper with fine adjustment (Metav IndustryLine) The Digital Caliper M217.056 is a long-range, hardened stainless steel digital caliper designed for large-component measurement and shop-floor inspection in manufacturing and toolmaking environments. Long 1,500 mm measuring range Fine-adjustment thumb screw Hardened stainless steel construction Digital display with mm/inch and preset Reliable long-range precision for large assemblies This long-range instrument delivers a measuring span of 1,500 mm, making it suitable for components that would otherwise require multiple shorter tools or repeated setups. The robust hardened stainless steel beam reduces bending and wear across the full length, which improves repeatability when measuring machine frames, housings or large fixtures. With a jaw length of 200 mm, the geometry supports secure, stable contact on bigger workpieces while the factory Werksnorm 0.11 mm gives a clear reference for expected performance during routine workshop checks. Durable handling and controlled measuring force Designed with a fine-adjustment thumb screw, the device permits careful approach to the measured surface so delicate parts are not overstressed and readings remain consistent. The fully hardened stainless construction resists corrosion and abrasion, extending service life in busy production environments. Lightweight ergonomics for two-person handling are balanced against the stiffness required to avoid deflection; this trade-off reduces measurement uncertainty and minimises rework or scrap due to inaccurate gauging. Digital workflow and traceable readings The integrated digital display offers standard functions (on/off, mm/inch, zero/ABS, hold, tolerance and preset) to streamline inspection routines and avoid transcription errors. Resolution is 0.01 mm (and 0.0005 in for imperial), enabling clear readout for typical workshop tolerances while saving time compared with analogue scales. The RB 5 data output enables connection to data loggers or SPC systems for fast process documentation and reduces manual input errors, supporting a lean metrology workflow and faster throughput. Practical features for inspection and storage The caliper is supplied without a probing tip to favour universal jaw measurements and is fitted for a standard 3 V power source. A factory calibration standard is applied and noted as Werksnorm; the instrument’s configuration and controls are aimed at straightforward integration into existing measurement benches. Supplied with appropriate transport protection, the unit is ready for safe storage and transfer between inspection stations without additional packaging effort. Contact Metav Werkzeuge for tailored advice on integrating the Metav IndustryLine Digital Caliper M217.056 into production measurement routines and ensure reliable long-range precision for large-format components Technical data Article number: M217.056 GTIN: 4054469110998 EClass: 21170344 Tariff number: 90173000 Core figures Measuring range: 0–1,500 mm Maximum range (mm): 1,500 Jaw length: 200 mm Resolution: 0.01 mm Resolution (inch): 0.0005 in Power supply: 3 V Special features Material: hardened stainless steel Digital display: ON/OFF, mm/inch, 0/ABS, HOLD, TOL, PRESET Fine-adjustment thumb screw Data output: RB 5 Delivered without tip Factory standard: Werksnorm (0.11 mm) FAQ What measuring span does this caliper cover? The caliper covers a measuring range up to 1,500 mm, making the M217.056 suitable for large components and long-format inspection tasks. How precise is the digital readout? The instrument provides a resolution of 0.01 mm (0.0005 in) on the digital display; this resolution supports standard workshop tolerances and quick pass/fail checks. Can measurement data be exported to a PC or SPC system? Yes, the caliper includes an RB 5 data output for connection to data loggers or SPC systems to support digital documentation and process control. Is the caliper corrosion resistant for workshop use? The beam and jaws are made from hardened stainless steel, which improves resistance to corrosion and wear under normal workshop conditions. Does the device include any adjustment aid for delicate parts? A fine-adjustment thumb screw is fitted to allow controlled, repeatable contact pressure during measurement. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Precision measurement for heavy components with workshop calipers
Workshop calipers, also described as heavy-duty calipers or industrial vernier calipers, are engineered for exact external and internal measurement on large workpieces. Designed for shipbuilding, rail vehicle manufacture and heavy plant assembly, these calipers deliver stable, repeatable readings even across extreme spans up to 10,000 mm (10 metres).
How these calipers perform in industrial practice
Built with an extremely distortion-free frame of hardened or weight-optimised special steel, workshop calipers maintain alignment across long reaches and heavy contact forces. They measure shafts, flanges and housings by combining robust jaws with optional measuring-force-limiting systems, fine micrometric slider adjustment and rounded internal measuring faces to reduce damage and measurement error. Available in analogue form with a fine vernier scale or as a digital variant with data output for direct integration into quality assurance systems.
Practical advantages that improve production
- Proven metrological stability for large components thanks to distortion-free construction.
- Hands-on ergonomics through measuring-force-limiting and precision fine adjustment, reducing operator error.
- Flexible data handling with digital data output for seamless quality documentation.
- Materials and design that withstand heavy workshop environments: hardened special steel or weight-optimised alternatives.
- Measurement range scalability up to 10,000 mm (10 metres) for XXL applications.
Why Metav is the sensible partner for these tools
Metav stands for the democratisation of precision and acts as a quality filter for the European market from its base in Emmerich. With over 48,000 customers and a portfolio exceeding 250,000 products, Metav combines long-standing expertise with a comprehensive range that simplifies procurement for industry and trade. In the field of workshop calipers, Metav’s assortment is positioned as the optimal choice, offering both analogue vernier solutions and modern digital models suitable for integration into industrial measurement workflows.
Core takeaway
For reliable dimensional control of oversized components, workshop calipers deliver measurable gains in repeatability, ergonomics and process integration—making them indispensable in heavy industry.
FAQ
What measuring ranges are available for workshop calipers?
Workshop calipers are offered for extreme tasks, with models covering spans up to 10,000 mm (10 metres) to accommodate large shafts, flanges and housings.
Can these calipers connect to quality assurance systems?
Yes. Many industrial vernier calipers are available with digital data output, enabling direct transfer of measurement values into QA systems for traceable documentation.
Which design features reduce operator-induced error?
Features such as a measuring-force-limiting system, a precise fine-adjustment mechanism and rounded internal measuring faces reduce variability and the risk of damaging components during measurement.
What materials ensure long-term stability for large-scale measurement?
Metav’s workshop calipers use hardened special steel or weight-optimised variants to ensure minimal distortion and lasting dimensional stability even under heavy use.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com