Heavy-duty workshop verniers for large components
Our heavy-duty workshop verniers provide precise external and internal measurement of massive workpieces such as large shafts, flanges and housings, delivering stability and repeatable results even across spans up to 10,000 mm. Designed for the demands of heavy industry, shipbuilding and rail vehicle manufacture, they combine a distortion‑resistant construction in hardened or weight‑optimised special steel with ergonomic features like force‑limited measuring systems and fine adjustment for exact slide movement. Available in analogue versions with fine vernier scales or digital variants with data outputs for quality assurance integration, these calipers ensure reliable dimensional control in XXL machining.
2000mm Digital Precision Caliper Color 2.4" Touchscreen, Wireless USB, ISO 17025 Calibrated - Microtech Metrology
Take advantage of the combination of long‑range reach, reliable wireless data transfer and traceable ISO 17025 calibration for efficient inspection of large components; order the calibrated digital caliper directly via Metav Werkzeuge or request advice from their consultants. Digital caliper — extra‑long 2,000 mm range with 2.4″ colour touchscreen (Microtech Metrology) A digital caliper designed for long‑span metrology, offering a 2,000 mm measuring range, integrated 2.4″ colour touchscreen and wireless plus USB data output for large‑component inspection. Extra‑long 2,000 mm measuring range 2.4″ colour touchscreen with tablet style Wireless and USB data output Supplied calibrated to ISO 17025 Reliable long-range measurement for large assemblies This instrument is classified in the Long range (1,000–2,000 mm) and therefore balances reach with manageable handling for sizeable workpieces. The extended 2,000 mm measuring capacity allows reproducible checks on frames, housings and long shafts that would otherwise require multiple setups. Constructed with a lightweight aluminium beam, the device reduces operator strain while preserving sufficient profile stiffness to keep measurements consistent over the full span. Fast digital workflow and documented data capture Equipped with a 2.4″ colour touchscreen and both wireless and USB data interfaces, the caliper integrates directly into inspection routines and quality documentation systems. Readout resolution of 0.01 mm on the display makes values easily comparable with process tolerances, while the digital outputs enable time‑saving transfer to spreadsheets or measuring software. This reduces manual transcription and supports efficient batch inspections and traceable data logging. Reproducible, certified accuracy for quality control Delivered fully calibrated to ISO 17025, the device includes a calibration certificate that documents traceability for audit and quality‑management purposes. The declared accuracy of ±0.06 mm provides clarity on expected measurement uncertainty when assessing large parts; this makes the tool suitable for workshop acceptance tests, incoming inspections and medium‑accuracy production control where long reach is the priority. Engineered for workshop durability and practical handling The digital caliper combines a robust measuring carriage with a smooth touch display designed for frequent use in industrial environments. The mix of durable construction and a user‑oriented interface reduces setup time and handling errors during repetitive tasks. Where measurements demand two‑person handling for safety or stability, the lightweight beam design eases coordination without compromising on repeatability across long measurement spans. For traceable measurement of large components, request the Microtech Metrology digital caliper (SKU 142120142) via Metav Werkzeuge — our Emmerich team will advise on delivery and calibration documentation Technical data Article number: 142120142 GTIN: 4061905455544 Manufacturer: Microtech Metrology Facts Measuring range: 0–2,000 mm Display: Colour 2.4″ touchscreen Resolution: 0.01 mm Accuracy: ±0.06 mm Data output: Wireless + USB Material: Aluminium Special features Delivered calibrated to ISO 17025 with certificate Digital instrument for long‑span measurements Designed for integration into inspection workflows Lightweight beam for improved handling over long lengths FAQ What measuring range does the instrument cover? The digital caliper covers a measuring range of 0–2,000 mm, providing long‑span capability for large assemblies and components. Is the caliper supplied with a calibration certificate? Yes — the caliper is supplied fully calibrated to ISO 17025 and includes the calibration certificate for traceability and audit purposes. How are measurements transferred to a PC or QA system? Measurements can be exported via the caliper’s wireless interface or through the USB port for direct integration into quality documentation workflows. What is the display resolution and practical accuracy? The instrument shows readings at 0.01 mm resolution on the colour touchscreen, with a practical accuracy stated as ±0.06 mm. Which manufacturer produces this caliper and what is the SKU? The caliper is produced by Microtech Metrology and is listed under SKU 142120142 for ordering and reference. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
2000mm Digital Precision Caliper Colour 2.4" Touchscreen Wireless USB ISO 17025 Calibrated - Microtech Metrology
Benefit from the combination of an extra‑long 2,000 mm measuring range, a 2.4" colour touchscreen and both Wireless and USB data transfer for reliable large‑format measurements; order the Microtech Metrology extra‑long digital caliper directly via Metav Werkzeuge or request technical advice from our consultants. Digital Caliper by Microtech Metrology — 2,000 mm, 2.4" Touchscreen The digital caliper from Microtech Metrology is an extra‑long precision instrument designed for reproducible measurements of large components, combining touchscreen ease with wireless data export. Extra‑long 2,000 mm measuring range 2.4" colour touchscreen for clear readout Wireless and USB data output Accurate, long‑span measurement that integrates into production The instrument is built for extended measurements, classified as extra‑long with a maximum measuring range of 2,000 mm, making it suitable for large assemblies and heavy components. The aluminium frame provides a favourable stiffness‑to‑weight ratio across long spans, while the 0.01 mm resolution ensures measurements are recorded with fine gradation. Nominal accuracy is stated as 0.085 mm, and the device is supplied fully calibrated to ISO 17025 with a calibration certificate included; this combination ensures traceable results and simplifies quality documentation for production control. Reduce data handling time and transmission errors Equipped with a 2.4" colour touchscreen, the instrument provides an intuitive display for readouts and quick unit selection. Data export uses both Wireless and USB interfaces, enabling direct connection to inspection software or hand‑held data loggers and reducing manual transcription. This capability accelerates measurement workflows, supports statistical process control and lowers error rates in quality assurance procedures, thereby improving throughput without compromising measurement integrity. Practical design for extended jaws and reproducible contact Long jaws of 600 mm length extend reach while maintaining a controlled contact geometry for outer, inner and step measurements. The aluminium construction balances rigidity with manageable mass and allows teams to handle and align the caliper over large parts without excessive fatigue. For repeat measurements on line or in the jig room, the device’s ergonomics and stable jaw guidance help to preserve reproducibility even at greater lengths, preserving consistency across multiple operators. Traceable calibration, documentation and supply reliability Supply includes a full ISO 17025 calibration certificate, which supports acceptance into formal inspection regimes and audit trails. The instrument’s specification and supplied certificate make it appropriate for metrology labs and production environments where documented conformity is required. Metav’s procurement and logistics expertise ensures reliable delivery from Emmerich, while the combination of precise mechanics, modern data interfaces and certified calibration provides a pragmatic path to integrating long‑range caliper measurements into existing quality systems. Contact Metav Werkzeuge to discuss the Microtech Metrology extra‑long digital caliper, arrange a specification review or request a quotation; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data SKU: 142120162 GTIN: 4061905455551 Manufacturer: Microtech Metrology Material: Aluminium Display: Color 2.4" Touchscreen Data output: Wireless+USB Measuring range: 0–2000 mm Resolution: 0.01 mm Nominal accuracy: 0.085 mm Jaw length: 600 mm Digital: Yes ISO 17025 calibration: Yes Core Measurements Measuring range: 0–2000 mm Resolution: 0.01 mm Accuracy: 0.085 mm Jaw length: 600 mm Display size: 2.4" Special features Colour touchscreen interface Wireless and USB connectivity Supplied with ISO 17025 calibration certificate Aluminium construction for extended‑span stiffness Suited to large components and fixture inspection FAQ What measuring range does the caliper cover? The Microtech Metrology digital caliper covers 0–2000 mm and is classified as an extra‑long instrument for large‑format measurements. Is the caliper supplied with calibration documentation? Yes, the caliper is delivered fully calibrated and includes an ISO 17025 calibration certificate with the device. How is measurement data transferred from the instrument? Data can be exported wirelessly or via USB, allowing direct integration into inspection software or data logging systems. What reading resolution and accuracy can be expected? The instrument provides a resolution of 0.01 mm and a nominal accuracy of 0.085 mm as specified by Microtech Metrology. Are there features that help with repetitive measurements on large parts? Long 600 mm jaws, stable aluminium guidance and touchscreen controls support reproducible outer, inner and step measurements on large components. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
2000mm Digital Werkstattmessschieber, 0,01mm, IP 65 - Metav IndustryLine
Die ausgezeichneten Bewertungen von Metav Werkzeuge stehen für 42.000 loyale Kunden. Probiere es aus und shoppe auf metav-shop.de.! Dein Plus an Reichweitebis 2000mm Bis 2000mm eröffnet dir mehr Spielraum. Große Werkstücke lassen sich leicht prüfen. Du kommst gut an Kanten und Außenmaße. Perfekt für Metallbau, Holz und Kunststoff. Wir haben uns Gedanken gemacht, wie wir die einzelnen Messbereiche der Messschieber Klassifizieren können. Klassifizierung Messbereiche beim Messschieber. Die Premium Messwerkzeuge von Metav IndustryLine werden von unseren Profis für Messwerkzeuge empfohlen. Metav IndustryLine steht für Premium Messwerkzeuge zu einem unschlagbaren Preis. Alle Messwerkzeuge werden nach der Produktion gestestet. Detailspezifikationen zumdigitalen Werkstattmessschieber von Metav IndustryLine: Marke: Metav IndustryLine Bezeichnung: Werkstattmessschieber Daumenstück gefedert Bestellnummer: M217.357.3 Fakten zum Werkzeug: Messbereich: 0 bis 2000mm Gewicht: 21,7kg Schnabellänge: 500mm Ablesung: 0,01mm Datenausgang: Bluetooth Ablesung in Inch/Zoll: 0,0005 IP-Schutz: IP 65 Besonderheiten Ausführung: digital Material: Kohlenstoff-Faser Lieferung im Kasten Digitalanzeige: mit mm/inch-, HOLD-, SET-, ON/OFF-, 0/INC- und DATA-Tasten Messsystem: induktiv Daumenstück gefedert Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com Welche Kriterien beim Kauf eines Messschiebers wichtig sind: Die zusätzliche Ausstattung, darunter Datenausgänge und Messkraftkontrollen, erlangt neben der Genauigkeit und dem Messbereich erhebliche Bedeutung. Ein Messschieber mit sorgfältig kalibrierter Messkraft ist speziell für die Qualitätssicherung und die Nutzung in Laboren von Vorteil. Zusätzlich sollten man darauf Achten, ob man einen kalibrierten Messschieber braucht. Eine Kalibrierung kann direkt nach Lieferung vorgenommen werden und sollte zur Sicherung der Prozessqualität jedes Jahr erneuert werden. Pflegehinweis - damit Sie lange etwas von Ihrem Werkstattmessschieber von Metav IndustryLine haben: Werkstattmessschieber leben viele Jahrzehnte, wenn du sie sauber, leicht eingeölt, korrekt gelagert und regelmäßig geprüft hälst. Vermeide aggressive Lösungsmittel oder dicke Ölschichten, wische nach jedem Einsatz mit einem fusselfreien Tuch nach, schütze die Führungen mit einem Mikrofilm aus Instrumentenöl (z. B. Starrett M-1), lagere das Werkzeug trocken in seinem Etui mit leicht geöffneten Messflächen – am besten mit einem Silicagel-Beutel – und überprüfe Nullpunkt, Messflächen und Gleitspiel nach ISO-Temperaturnorm (20 °C).
2000mm Digital Werkstattmessschieber, 0,01mm, IP 65 - Metav IndustryLine
Der von Ludwig Josef Bayer 1989 gegründete Traditionsvertrieb von Messwerkzeugen steht mit seiner Eigenmarke Metav IndustryLine für hevorragende Messwerkzeuge zu einem überzeugenden Preis. HIGHLIGHTS Messbereich: bis 2000mm Ablesung: 0,01mm Material: Kohlenstoff-Faser digitale Ausführung Datenausgang: Bluetooth Daumenstück gefedert Bereit für große Aufgaben Der Messbereich 0–2000mm gibt Sicherheit bei großen Abmessungen. Du musst seltener neu ansetzen. Das macht die Arbeit ruhiger und schneller. Gut für Qualitätssicherung und Serienarbeit. Schauen Sie hier, wie wir die Messbereiche klassifiziert haben. Klassifizierung Messbereiche beim Messschieber. Die Messwerkzeuge von Metav IndustryLine werden von unseren Experten für Messwerkzeuge empfohlen. Metav IndustryLine steht für hervorragende Messwerkzeuge zu einem vervorragenden Preis. Alle Messwerkzeuge werden nach der Produktion gestestet. Sie sind unsicher, ob das Werkzeug zu Ihrer Anwendung passt?? Oder es fehlen Ihnen noch technische Daten?? Kein Problem, sprechen Sie uns an!! 📧 eMail: info@metav-werkzeuge.com ☎️ Telefon: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Leistungsmerkmale zumdigitalen Werkstattmessschieber von Metav IndustryLine: Marke: Metav IndustryLine Bezeichnung: Werkstattmessschieber Daumenstück gefedert Bestellnummer: M217.357.2 Zahlen / Fakten: Messbereich: 0 bis 2000mm Gewicht: 14,8kg Schnabellänge: 300mm Ablesung: 0,01mm Datenausgang: Bluetooth Ablesung in Inch/Zoll: 0,0005 IP-Schutz: IP 65 Ausführungen Ausführung: digital Material: Kohlenstoff-Faser Lieferung im Kasten Digitalanzeige: mit mm/inch-, HOLD-, SET-, ON/OFF-, 0/INC- und DATA-Tasten Messsystem: induktiv Daumenstück gefedert Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com Wichtige Aspekte beim Erwerb eines Messschiebers: Neben den zentralen Faktoren Genauigkeit und Messbereich gewinnen auch komplette Funktionen wie der Datenausgang oder die Überwachung der Messkraft zunehmend an Bedeutung. Im Umfeld der Qualitätssicherung und in Laboreinrichtungen ist ein Messschieber mit kontrollierter Anwendungskraft besonders hilfreich. Darüber hinaus ist sinnvoll zu betrachten, ob eine Kalibrierung des Messschiebers notwendig ist. Die Möglichkeit zur Kalibrierung besteht unmittelbar bei Entgegennahme; zur Sicherstellung der Prozessstabilität sollte regelmäßig jährlich neu kalibriert werden.
2000mm Digital Werkstattmessschieber, 0,01mm, IP 65 - Metav IndustryLine
Der von Ludwig Josef Bayer 1989 gegründete Traditionsvertrieb von Messwerkzeugen steht mit seiner Eigenmarke Metav IndustryLine für hevorragende Messwerkzeuge zu einem hervorragenden Preis. Das wichtigste auf einen Blick Messbereich: bis 2000mm Ablesung: 0,01mm Material: Kohlenstoff-Faser digitale Ausführung Datenausgang: Bluetooth Daumenstück gefedert Reichweite für jeden Tag 0 bis 2000mm deckt viele Aufgaben ab. Lange Rohre, breite Leisten und starke Profile gelingen einfach. So hältst du Abläufe schlank. Ideal für tägliche Kontrollen. Schauen Sie hier, wie wir die Messbereiche klassifiziert haben. Klassifizierung Messbereiche beim Messschieber. Expertentip: Wie stelle ich planparallelen Kontakt sicher? Messschenkel müssen vollständig anliegen; kippt der Schieber, entsteht ein systematischer Kippfehler. Bei Innenmessungen zusätzlich prüfen, ob beide Kreuzschnäbel anliegen. Spezifikationen zumdigitalen Werkstattmessschieber von Metav IndustryLine: Marke: Metav IndustryLine Bezeichnung: Werkstattmessschieber Daumenstück gefedert Bestellnummer: M217.357 Daten: Messbereich: 0-2000mm Gewicht: 11kg Schnabellänge: 200mm Ablesung: 0,01mm Datenausgang: Bluetooth Ablesung in Inch/Zoll: 0,0005 IP-Schutz: IP 65 Ausführungen Ausführung: digital Material: Kohlenstoff-Faser Lieferung im Kasten Anzeige: mit mm/inch-, HOLD-, SET-, ON/OFF-, 0/INC- und DATA-Tasten Messsystem: induktiv Daumenstück gefedert Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com Zu beachtende Faktoren beim Erwerb eines Messschiebers: Während Präzision und Messbereich wesentliche Aspekte sind, darf die Berücksichtigung von Funktionen wie Datentransfer und Messkraftkontrolle nicht unterschätzt werden. Der Einsatz eines Messschiebers mit kontrollierter Messkraft ist besonders in der Qualitätssicherung und in Laborumgebungen vorteilhaft. Ebenso sollte man überlegen, ob die Kalibrierung des Messschiebers erforderlich ist. Eine Kalibrierung kann direkt nach Lieferung vorgenommen werden und sollte zur Sicherung der Prozessqualität jedes Jahr erneuert werden.
2000mm Digital Workshop Caliper 300mm Jaw Length, IP65, Carbon Fibre With Steel Measuring Faces - Filetta
Take advantage of the combination of a lightweight carbon fibre beam, long 0–2000 mm measuring range and integrated Digimatic & Bluetooth outputs for efficient, traceable workshop measurement of large components; order directly via Metav Werkzeuge or ask our consultants for configuration and delivery details. Filetta Digital workshop caliper M910.353 — carbon beam, Digimatic & Bluetooth outputs The Filetta digital workshop caliper M910.353 is a robust, long-range measuring instrument designed for heavy-duty workshop use and data‑driven workflows. Carbon fibre main beam for low weight and high stiffness IP65 protection for shop-floor resilience Digimatic and Bluetooth data outputs for integration 300 mm jaws with hardened steel measuring faces Greater reach with manageable handling for large components This calliper combines a 0–2000 mm measuring range with a carbon fibre main beam to deliver the reach required for large fixtures while keeping handling ergonomic. The reduced mass — nominally 2.7 kg — and the extended overall length enable measurements across large workpieces without the full weight penalty of steel long‑balken callipers. Classified among long‑range workshop callipers, it is suited to applications where repeatable length checks on sizable assemblies, housings or long shafts are needed, yet portability and ease of two‑person handling remain relevant. Reliable numeric output and controlled measurement for fewer errors Measurement is presented on a digital display with 0.01 mm readout resolution and a specified accuracy of 0.25 as supplied. The instrument features mm/inch switching, ABS/INC mode, Preset/Reset and an integrated fine‑adjustment thumbwheel plus a locking screw to fix a reading. A controlled measuring force of 5–10 N reduces variance caused by operator pressure, helping to maintain consistent results between operators. For data workflows, both Digimatic and Bluetooth outputs transmit values directly to data collectors, SPC systems or DROs, reducing transcription errors and saving process time during serial inspections. Workshop durability, transport security and simple power supply Protection to IP65 guards the electronics against dust and splash exposure typical of busy workshops. Measuring faces are steel‑hardened for wear resistance where the jaws contact parts, while the carbon beam resists bending and keeps the instrument lightweight. Power comes from a single CR2032 battery for extended runtime in routine use. Delivery includes a protective transport case to safeguard the calliper during storage and transfer, ensuring the tool reaches the bench ready for immediate use. Contact Metav Werkzeuge for a technical consultation and delivery plan for the Filetta digital workshop caliper M910.353, including integration options for Digimatic and Bluetooth data capture Technical data Article number: M910.353 Manufacturer: Filetta Product type: Digital workshop caliper Measuring range: 0–2000 mm Jaw length: 300 mm Overall length: 2246 mm Resolution: 0.01 mm Specified accuracy: 0.25 Measuring force: 5–10 N Weight: 2.7 kg Power: 1x CR2032 Protection class: IP65 Material: Carbon fibre beam with steel measuring faces Data outputs: Digimatic and Bluetooth Display functions: mm/inch, ABS/INC, Preset/Reset Fine adjustment and locking screw Delivered in a transport case Designed for workshop and heavy‑duty measurement FAQ What range of parts is this calliper designed for? The Filetta digital workshop caliper M910.353 covers a 0–2000 mm measuring range, making it suitable for large components, fixtures and long shafts commonly found in machine and tool rooms. How is data transferred from the instrument to inspection systems? This model provides both Digimatic and Bluetooth outputs; values can be sent directly to data loggers, DROs or SPC software for streamlined documentation and reduced manual entry. Is the instrument dust‑ and splash‑resistant for shop use? Yes, the caliper has IP65 protection which shields the electronics against dust ingress and low‑pressure water jets, improving reliability in workshop environments. What ensures consistent readings between operators? The combination of a controlled measuring force (5–10 N), the fine‑adjustment thumbwheel and the locking screw helps to standardise contact pressure and preserve measured values, reducing operator‑related variance. Are the measuring faces wear resistant for long service life? The jaws are fitted with hardened steel measuring faces to resist wear from repeated contact and to retain dimensional accuracy over time. Manufacturer / Responsible: Schut Geometrische Meettechniek bv; Duinkerkenstraat 21; 9723 BN Groningen; The Netherlands; +31 50 5877877; schutnl@schut.com
2000mm Digital Workshop Caliper Carbon With 200mm Beak, IP65, Digital Display, CR2032 Battery, Delivered In Case - Filetta
Combine a 0–2000 mm measuring range with a carbon‑fibre construction and IP65 protection to measure large components reliably; order directly via Metav Werkzeuge or consult their technical team for specification matching. Filetta M910.352 digital workshop caliper — Carbon fibre body, 0–2000 mm range, IP65 The Filetta M910.352 digital workshop caliper is a long‑range, rugged measuring instrument designed for heavy workshop and production use, offering digital output for process integration and robust protection for harsh environments. Carbon fibre body, steel measuring faces 0–2000 mm measuring range for large parts IP65 protection for workshop conditions Digimatic and Bluetooth data output Large‑format accuracy for production and jig work Designed for extended measurements, this caliper belongs to the Long class (measuring range up to 2,000 mm), which is ideal when reach must be balanced with handling and stiffness. The combination of a carbon‑fibre main beam and steel measuring faces reduces weight while preserving contact rigidity, so measurements across long spans remain reproducible. With an indicated accuracy of 0.21 mm, the instrument delivers reliable results for workshop control tasks and large assembly checks, where repeatability and durability matter as much as reach. Digital readings and seamless data capture The unit provides a clear digital display with mm/Inch toggle and ABS/INC, plus Reset/Preset functions for quick setup. Data output supports both Digimatic and Bluetooth, enabling direct transfer of readings into inspection software or SPC systems and cutting transcription errors. The display resolution of 0.01 mm offers fine numerical detail for standard quality control, while the digital interfaces simplify documentation and traceable data collection in production environments. Built for workshop conditions and practical handling With an IP65 rating and a total length of 2,246 mm, the instrument stands up to dust and splash exposure common in machine shops. A lock screw secures positions for stable measurement, and a fine‑adjustment mechanism allows precise approach to contact points on large parts. Power is provided by a single CR2032 battery for convenient exchange on the shop floor. The caliper’s weight of 2.6 kg keeps it manageable for two‑person handling during longer measurements without compromising robustness. Benefits that support workflow and traceability A 200 mm jaw length gives secure contact on bulky components and fixturing, while the measured 5–10 N contact force balances surface protection with stable contact. The instrument is supplied in a protective case to simplify transport and storage between job sites or bench and machine. Together, these features reduce handling time, improve data reliability and integrate measurement into digital quality routines, helping to sustain a smooth production flow. Contact Metav Werkzeuge for a technical consultation and shipment from Emmerich — Metav’s quality filter ensures consistent production readiness and reliable supply for precision workshops. Technical data Article number: M910.352 Manufacturer: Filetta Product type: Digital workshop caliper Label: Digital workshop caliper Carbon 0–2000 mm and 200 mm jaw length Facts Measuring range: 0–2000 mm Accuracy: 0.21 mm Display resolution: 0.01 mm Total length: 2246 mm Jaw length: 200 mm Weight: 2.6 kg Measurement force: 5–10 N Battery: 1x CR2032 Protection class: IP65 Special features Carbon‑fibre beam with steel measuring faces Digimatic and Bluetooth data output Digital display with mm/Inch, ABS/INC, Reset/Preset Fine‑adjustment mechanism Lock screw for fixed measurements Supplied in protective case Digital instrument FAQ What accuracy can be expected for long measurements? The Filetta M910.352 digital workshop caliper specifies an accuracy of 0.21 mm, giving dependable results for large‑format workshop checks and assembly verification. Which data outputs are supported for process integration? This caliper offers Digimatic and Bluetooth outputs so readings from the Filetta caliper can be captured directly into inspection software or SPC systems. Is the caliper suitable for use in dusty or damp environments? Yes — the instrument has an IP65 rating, making it resistant to dust and splash water commonly found in production environments. Does the instrument include a transport or storage solution? The caliper is supplied in a protective case, facilitating safe transport and storage between workstations. How is the instrument powered and how easy is battery replacement? Power is from one CR2032 cell; replacement is straightforward and can be carried out on the shop floor without special tools. Manufacturer / Responsible: Schut Geometrische Meettechniek bv; Duinkerkenstraat 21; 9723 BN Groningen; The Netherlands; +31 50 5877877; schutnl@schut.com
2000mm Precision Caliper Colour 2.4" Touchscreen Wireless/USB ISO 17025 Calibration - Microtech Metrology
Benefit from a long‑range measuring solution that combines a 2,000 mm measurement range, lightweight aluminium construction and reliable ISO 17025 calibration for traceable results; order the digital caliper directly via Metav Werkzeuge or consult our specialists for integration advice. Digital Caliper by Microtech Metrology — 2,000 mm, Colour 2.4" Touchscreen Digital caliper for measuring large components and assemblies, designed for workshop, fixture and heavy‑duty metrology applications with integrated data transfer 2,000 mm measurement range Colour 2.4" touchscreen display Wireless and USB data output Delivered with ISO 17025 calibration Precision for large components and repeatable results The instrument delivers a 2,000 mm measuring span while maintaining a practical 0.01 mm resolution and a stated 0.12 mm accuracy, offering a predictable performance envelope for large‑format measurements. Classified in the Long (1,000–2,000 mm) category, this caliper balances reach and handling: the extended beam covers sizeable workpieces without resorting to cumbersome band systems, and the jaw length 1,000 mm supports secure contact on broad features. The specified measuring force 1–20 N provides a usable range that reduces variation from manual pressure and helps standardise measuring technique across operators, which in turn improves repeatability on shop‑floor quality checks. Seamless data capture for modern workflows Equipped with Wireless and USB outputs and a Colour 2.4" touchscreen, the device supports direct digital capture of measurements for statistical process control or inspection reports. The combination of intuitive touch operation and reliable data transfer reduces transcription errors and accelerates data logging into existing inspection software or spreadsheets. As a practical touchpoint for Industry 4.0 upgrades, the connectivity features enable quicker cycle times for quality documentation and simpler traceability chains, turning manual measuring tasks into auditable, transferable datasets. Lightweight design, rugged use and calibrated traceability Constructed from aluminium, the instrument remains manageable at long lengths, lowering operator fatigue while offering sufficient profile stiffness for consistent readings. The design is aimed at repetitive workshop use where manoeuvrability and transportability matter. Importantly, the caliper is supplied fully calibrated to ISO 17025 with a calibration certificate, ensuring measurement traceability and compliance with laboratory or production audit requirements. This delivered certification reduces incoming inspection effort and supports formal quality systems by providing documented measurement uncertainty from the outset. Contact Metav Werkzeuge for detailed technical matching and delivery from Emmerich — request the Microtech Metrology digital caliper (SKU 142120102) with ISO 17025 calibration via info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data SKU: 142120102 GTIN: 4061905036866 Manufacturer: Microtech Metrology Numerical Data Measuring range: 0–2000 mm Resolution (display): 0.01 mm Stated accuracy: 0.12 mm Measuring force: 1–20 N Jaw length: 1000 mm Design & Features Material: Aluminium Digital display: Colour 2.4" touchscreen Data output: Wireless and USB Delivered calibrated: ISO 17025 certificate included Digital instrument: yes FAQ Is the caliper supplied ready for use in a certified inspection? Yes. The Microtech Metrology digital caliper (SKU 142120102) is delivered fully calibrated to ISO 17025 and includes the calibration certificate for immediate use in certified inspections. What connectivity options are available for data logging? Measurements can be exported via Wireless or USB, enabling direct capture into inspection software or data collection systems from the Microtech Metrology digital caliper. Is the instrument suitable for workshop measurements of large fixtures and housings? Yes. With a 2,000 mm measuring range and a jaw length of 1,000 mm, the caliper is intended for large components, fixtures and assemblies commonly found in machine and mould making. How does the stated measuring force affect results? The 1–20 N measuring force range helps limit variation from operator pressure; using consistent measuring force improves repeatability when using the Microtech Metrology digital caliper. What advantages does the aluminium construction provide? Aluminium reduces weight for long‑range handling while maintaining sufficient stiffness for reproducible measurements, making the instrument easier to manoeuvre on the shop floor. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
2000mm Workshop Caliper Colour 2.4" Touchscreen Wireless USB ISO 17025 Calibrated - Microtech Metrology
Take advantage of the combination of 2,000 mm measuring range, ISO 17025 calibration certificate, and wireless data output for reliable, traceable measurements of large components; order the long-range workshop caliper directly via Metav Werkzeuge or contact our consultants for application advice. Workshop caliper — long-range digital caliper by Microtech Metrology with 2,000 mm range and 2.4" colour touchscreen Workshop caliper is a long-range digital measuring instrument designed for precise dimensional checks on large workpieces in heavy workshops and fixture fabrication. 2,000 mm measuring range for large components 2.4" colour touchscreen display ISO 17025 calibration certificate included Wireless and USB data output for integration Accurate large-scale measurement with industrial reliability The 2,000 mm measuring span classifies this instrument in the Long caliper category, making it suitable for large-format components where reach and repeatability matter. The gauge provides a resolution of 0.01 mm on its display, which is the standard for digital calipers used in production control. The extended jaw geometry and the 300 mm long jaw allow reliable access into deep bores and recesses, reducing the need for secondary fixtures and saving process time. As a result, inspection cycles for sizeable assemblies become more efficient without sacrificing consistency. Seamless data integration for traceable workflows Equipped with Wireless and USB outputs and a clear 2.4" touchscreen, the instrument simplifies data capture and transfer to quality-management systems. Digital readout and direct export of measurement values reduce transcription errors and accelerate documentation of inspection reports. The combination of wireless transfer for convenience and USB for secure wired connections supports both shop-floor flexibility and office-level traceability, which is particularly valuable in regulated production environments and when maintaining audit trails. Workshop-proof design that endures daily use The caliper is built for the workshop: hand-finished measuring jaws ensure a precise contact geometry, while the overall construction resists the knocks and contamination typical of industrial surroundings. The specified measuring force 1–20 N offers a controlled contact pressure range to limit variation from operator handling; this helps maintain reproducible results across multiple operators. Robust engineering protects the measuring system against premature wear, lowering maintenance needs and supporting steady production output. Certified calibration for measurement certainty Delivered with an ISO 17025 calibration certificate, the instrument meets the highest international laboratory standard for calibration services. ISO 17025 certification confirms that measurements were carried out under accredited laboratory conditions and that a traceable calibration certificate is supplied with the device. This ensures immediate suitability for quality-control tasks that require documented metrological traceability and supports compliance with internal QA procedures and external audits. For precision inspections of large parts choose Microtech Metrology's long-range workshop caliper and contact Metav Werkzeuge for tailored purchasing advice and technical clarifications — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: 141020256 GTIN: 4061905038761 Manufacturer: Microtech Metrology Display: Color 2.4" touchscreen Calibration: ISO 17025 certificate included Facts Measuring range: 0–2000 mm Resolution (readout): 0.01 mm Measuring force: 1–20 N Jaw length: 300 mm Special features Digital instrument Wireless + USB data output Hand-finished measuring jaws FAQ What is the usable measuring range of this caliper? The caliper offers a measuring range of 0–2000 mm, providing suitability for large-format components and assemblies. Does the instrument arrive calibrated and with documentation? Yes, the instrument is supplied fully calibrated with an ISO 17025 certificate, ensuring traceable measurement results for quality assurance. Which data interfaces are available for measurement transfer? Measurement values can be transferred via Wireless connection or USB for secure and flexible data integration. How fine is the readout resolution on the display? The digital readout provides a 0.01 mm resolution, matching common industrial standards for digital calipers. Are the measuring jaws suitable for workshop use? The device features hand-finished measuring jaws, designed for durable contact geometry and reliable results in a workshop environment. Which manufacturer produces this caliper and what is the SKU? The caliper is produced by Microtech Metrology and is listed under SKU 141020256. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
2000mm Workshop Caliper Monoblock Fine Adjustment 0.05mm Vernier, Hardened Stainless Steel, 200mm Jaws, in Case - Metav IndustryLine
Take advantage of the combination of a 2,000 mm measuring range, hardened stainless-steel construction and a monoblock slide with fine adjustment to measure large components reliably; order the item directly via Metav Werkzeuge or contact our consultants for application advice. Workshop caliper M201.380 — long-range, hardened stainless steel with fine-adjustment The M201.380 workshop caliper is a long-range analogue measuring instrument designed for large-format components in heavy machining, fixture making and mould work. 2,000 mm measuring range Hardened stainless steel construction Fine-adjustment thumbwheel Monoblock slide for maximum rigidity Stable measurement for large components and assemblies The long-format design offers a generous 2,000 mm measuring range, making this instrument suitable where extended reach and repeatability are required. The monoblock slide reduces play and flex, so long-distance measurements remain reproducible across the full travel. The combination of a rigid one-piece slide and a hardened stainless-steel body with a matt-chrome scale provides both corrosion resistance and a durable, low-reflection readout that is easier to read under workshop lighting. This configuration is aimed at professional workshops and production environments that need dependable results on large workpieces. Precise mechanical reading with dual vernier scales The analogue vernier arrangement includes a 1/128" scale on the upper side and a 1/20 mm scale on the lower side, enabling both imperial and metric readings without electronics. The metric vernier corresponds to a readable increment of 0.05 mm, the common industrial standard for mechanical calipers, and is therefore suited to general workshop metrology and routine quality checks. The fine-adjustment thumbwheel ensures controlled closure of the jaws for consistent contact force, reducing human-induced variation during critical comparisons and setup tasks. Built to standard and engineered for workshop use The jaw length of 200 mm places the instrument within the testing scope of DIN 862 for calipers with that jaw size, meaning the product meets established mechanical tolerances for vernier calipers in this configuration. The absence of pointed tips (flat jaw style) focuses the tool on external, internal and step measurements of broad profiles rather than fine-pointed probing. The robust construction tolerates everyday use on the shop floor while preserving scale legibility and mechanical function over long service intervals. Practical benefits for production and inspection workflows As a non-electronic measuring tool, the device removes reliance on batteries and avoids issues with display failure; it is therefore a low-maintenance option for continuous operation. The fine-adjustment system combined with the monoblock slide increases operative speed for repetitive checks while maintaining the 0.05 mm reading granularity required in many production environments. Where long-range dimensional verification is frequent, this caliper supports faster set-ups, fewer tool changes and a smoother inspection routine. Specify the Metav IndustryLine M201.380 for long-range workshop measurement and contact Metav Werkzeuge for tailored delivery and application advice from Emmerich. Technical Data Article number: M201.380 GTIN: 4054469102047 ECLASS: 21170344 Manufacturer: Metav IndustryLine Material: hardened stainless steel with matt-chrome scale Type: analogue vernier workshop caliper Facts Measuring range: 0–2000 mm Jaw length: 200 mm Nonius: 1/128" (top) and 1/20 mm (bottom) Metric readable increment: 0.05 mm Conforms to DIN 862 for jaw length up to 200 mm Special features Monoblock slide for increased rigidity Fine-adjustment thumbwheel for controlled contact Hardened stainless-steel construction for durability Matt-chrome scale for reduced reflection and clear reading Flat jaws (without pointed tips) for broad-surface measurements FAQ What measurement range does this caliper cover? The M201.380 covers a measuring range of 0–2000 mm, designed for long-format inspection and layout tasks. What precision can be expected from the mechanical vernier? The lower vernier corresponds to a readable increment of 0.05 mm, providing the customary industrial mechanical precision for workshop calipers. Is the instrument suitable for heavy workshop environments? Yes, the hardened stainless-steel body and monoblock slide of the M201.380 are engineered to withstand demanding shop-floor use while keeping the scale legible. Which measurement tasks is this caliper intended for? The M201.380 is intended for external, internal and step measurements on large components, fixtures and assemblies where extended reach and stiffness are required. Does the caliper meet any standards? For the given jaw length of 200 mm the instrument conforms to DIN 862 specifications for mechanical vernier calipers. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
2000mm Workshop Caliper With Points 200mm Jaws 0.05mm Graduation Fine Adjustment Monoblock In Hardened Stainless Steel, Supplied In Case - Metav IndustryLine
This long-range monoblock caliper combines a 2,000 mm measuring span with hardened stainless steel and a fine-adjustment spindle for reproducible large-format measurements. Order the workshop caliper directly via Metav Werkzeuge or ask our consultants if needed. Workshop caliper M201.341 (Monoblock, 2,000 mm) – Metav IndustryLine The Workshop caliper M201.341 is a long-range, monoblock precision caliper engineered for reliable large-component measurement in demanding workshop and toolroom environments. Monoblock design for high rigidity Hardened stainless steel construction Fine-adjustment spindle for precise locking Delivered in protective case for transport Built for reproducible large-format measurement The caliper’s 2,000 mm measuring span classifies it in the Long category of workshop calipers, where profile stiffness is essential for repeatable results on sizeable components. The monoblock construction increases torsional rigidity and reduces deflection over the full travel, which translates to fewer measurement errors when checking long shafts, housings or fixtures. For production and inspection workflows this means faster measurement cycles and a lower risk of scrap due to unstable readings. Precise mechanical control and readable scale This instrument uses an analogue vernier arrangement with a nominal 0.05 mm resolution, matching the industrial standard for robust workshop measurement. The combination of a matt chrome scale and hardened stainless steel surfaces resists wear while maintaining clear, low‑glare graduations for repeatable readings. The integrated fine‑adjustment spindle allows smooth, minute closing control so incremental positioning is adjusted without over‑tightening; this preserves both accuracy and operator ergonomics. The dual vernier notation (1/128" top and 1/20 mm bottom) supports cross-referencing values in inch and metric contexts. Durable features for everyday workshop handling The caliper is supplied with dedicated measuring tips and extended jaws (200 mm jaw length) that aid access into deeper recesses and maintain contact stability on larger profiles. Delivery in a protective case ensures safe transport between workstations and helps protect the instrument against shock and contamination during handling. The design follows the DIN 862 guidance for jaw geometry up to 200 mm, with longer lengths manufactured to workshop standard to preserve measuring integrity across the instrument’s span. Practical use, maintenance and workshop benefits This instrument suits tasks such as checking long rails, fixture set-ups, bearing journals and casing assemblies where a long travel and rigid guideway are decisive. Routine care — wiping the guide surfaces clean, avoiding impacts and storing the caliper in its case after use — preserves the matt chrome scale and hardened surfaces. The simple mechanical construction makes on‑site adjustments straightforward and reduces dependency on batteries or electronics, supporting continuous operation in production environments. Contact Metav Werkzeuge in Emmerich for detailed specification advice and to discuss how the 2,000 mm monoblock caliper can be integrated into workshop inspection routines — phone +49 2822 7131930 or eMail info@metav-werkzeuge.com Technical data Article number: M201.341 GTIN: 4054469101880 eClass: 21170344 Facts Measuring range: 2,000 mm Resolution: 0.05 mm Jaw length: 200 mm Vernier: 1/128" (top), 1/20 mm (bottom) Norm: DIN 862 (jaw length up to 200 mm; from 250 mm to workshop standard) Special features Monoblock construction Hardened stainless steel with matt chrome scale Fine‑adjustment spindle Measuring tips (points) Supplied in protective transport case FAQ What measurement range does the caliper cover and how is it classified? The instrument provides a 2,000 mm measuring range and is classified as a Long workshop caliper, designed for large-format components and assemblies. What level of precision can be expected from this analogue caliper? The analogue vernier offers a resolution of 0.05 mm, an industrial standard suitable for routine workshop inspection and reliable dimensional checks. Is the caliper suitable for deep or recessed measurements? Yes. The extended jaws (200 mm jaw length) and pointed measuring tips facilitate access to deeper recesses and help maintain stable contact on larger parts. How does the fine‑adjustment spindle improve measurement reliability? The fine‑adjustment spindle enables controlled closing and micro‑positioning, reducing the risk of overpressure and operator-induced variability during setting and locking. How is the caliper protected during transport? The instrument is delivered in a protective case to guard against impact and contamination while moving between workstations or sites. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
2000mm Workshop Caliper Without Tips Monoblock Fine Adjustment 0.05mm Jaw Length 300mm Stainless Hardened Matt Chrome Scale, DIN 862 - Metav IndustryLine
Combine the monoblock construction, a fine‑adjustment screw and the extended 0–2000 mm measuring range to achieve reliable, repeatable long‑span measurements in workshop environments. Order the instrument directly via Metav Werkzeuge or contact our consultants for specification advice and delivery options. Workshop Caliper without Tips M201.381 – Long‑range 0–2000 mm, 300 mm jaws (Monoblock) A Workshop Caliper without Tips built for long‑span measurements and heavy workshop use, featuring a monoblock beam and a fine‑adjustment mechanism for precise incremental positioning. Monoblock hardened stainless steel beam Fine‑adjustment screw for precise positioning Transport case included for safe handling Accurate long‑span measurement for heavy workshop parts The caliper’s 0–2000 mm measuring range addresses large components that standard workshop instruments cannot reach. Its monoblock beam design increases profile stiffness so that measurements remain reproducible over long spans; this reduces deflection and improves repeatability when handling sizeable castings, housings or fixtures. The result is a dependable long‑range tool that bridges the gap between routine shop calipers and specialised length‑measuring systems. Simple, reliable vernier operation with fine adjustment This instrument is an analogue vernier caliper with a dual scale arrangement: Vernier 1/128" (upper) and 1/20 mm (lower), offering a practical readable division and a nominal 0.05 mm resolution for workshop control tasks. The integrated fine‑adjustment screw enables controlled approach and exact seating of the jaws before reading, which reduces user‑induced error and speeds up repetitive measuring cycles. For users familiar with vernier technique, the mechanical design gives fast, tactile feedback without electronics. Designed for workshop handling and transport safety Constructed from hardened stainless steel with a matt‑chromed scale, the caliper stands up to workshop conditions and resists corrosion while keeping scale legibility high. The 300 mm jaws provide deep reach where longer jaw geometry is needed, and the instrument is supplied in a transport case (plastic or wooden) for secure handling and storage—note that wooden cases for tools of this size are intended primarily for transport. The combination of robust materials and protective packaging supports daily use on the shop floor. Standards, scope and practical benefits The caliper is dimensioned and marked in accordance with recognised workshop practices; the declared norm is DIN 862 for shorter jaw lengths, while units with extended jaw lengths follow the manufacturer’s workshop standard when jaw length exceeds 250 mm. This long‑range solution delivers practical traceability for workshop inspection routines and, together with Metav’s product range, simplifies procurement and stock‑keeping for machines and jigs. The SKU M201.381 identifies the specific long‑span variant for ordering and inventory purposes. For application advice or to request a tailored quote for the Metav IndustryLine M201.381 long‑range caliper, contact Metav Werkzeuge in Emmerich—our specialists will advise on integration, delivery and packaging options. Technical Data Article number: M201.381 GTIN: 4054469102054 ECLASS: 21170344 Facts Measuring range: 0–2000 mm Jaw length: 300 mm Resolution: 0.05 mm Vernier: 1/128" (upper) / 1/20 mm (lower) Special features Material: hardened stainless steel with matt‑chromed scale Monoblock beam construction Fine‑adjustment screw Delivery in transport case (plastic or wooden) Conforms to DIN 862 up to 200 mm; >250 mm according to factory standard Category: Long‑range caliper (workshop) FAQ What measuring range does this caliper cover? The caliper covers 0–2000 mm, making it suitable for long‑span workshop measurements and large assemblies. Is the instrument suitable for heavy workshop use? Yes. The M201.381 features a monoblock hardened stainless‑steel beam and matt‑chromed scale designed for robust, repeated use in workshop conditions. How precise is the reading on this vernier caliper? The instrument provides a practical workshop resolution of 0.05 mm, with the vernier arrangement of 1/128" (upper) and 1/20 mm (lower) to aid fast, reliable readings. Does the caliper come protected for transport? The caliper is supplied in a transport case (plastic or wooden) to ensure safe handling during delivery; wooden cases for larger tools are primarily intended for transport rather than permanent storage. Which standard applies to this caliper? Shorter jaw variants follow DIN 862; for this long‑jaw version (300 mm jaws) the device is produced according to the manufacturer’s workshop standard for extended jaw lengths. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
2000mm Workshop Digital Caliper 2.4" Colour Touchscreen, Wireless/USB, ISO 17025 Calibration - Microtech Metrology
Take advantage of the combination of a 2,000 mm measurement range, colour touchscreen with wireless and USB data output, and full ISO 17025 calibration for immediate use in traceable quality control. Order the Workshop Caliper directly via Metav Werkzeuge or ask our consultants for application advice. Workshop Caliper by Microtech Metrology — 2,000 mm range, 2.4" colour touchscreen The Workshop Caliper is a long-range digital caliper engineered for precise measurement of large components in workshops and toolrooms, combining robust handling with traceable calibration. 2,000 mm measurement range Colour 2.4" touchscreen display Wireless and USB data output Delivered fully calibrated to ISO 17025 Accurate measurements for large components Classified as Long (measurement range up to 2,000 mm), this instrument is designed for measurements of sizeable workpieces where stiffness and repeatability matter. The extended span permits inspection of large housings, fixtures and assemblies while the construction balances reach with usability to keep handling straightforward. The specified measurement force 1–20 N helps to maintain consistent contact pressure across different measurement tasks, reducing variability and improving reproducibility for routine quality checks. Seamless digital workflow and documented traceability Equipped with a 2.4" colour touchscreen and both Wireless and USB data interfaces, the caliper integrates into modern measurement routines and supports direct data capture to inspection software or spreadsheets. The unit is supplied fully calibrated to ISO 17025, with a calibration certificate included, enabling immediate use in documented inspection processes and simplifying audits. These features minimise transcription errors and support a clear audit trail for production control. Workshop-ready design and repeatable operation Built for regular workshop use, the caliper features handcrafted measuring jaws and a fine adjustment mechanism for controlled closing action, improving tactile feedback and alignment when measuring edges or steps. The combination of robust materials and careful finishing reduces wear at the contact faces and sustains measurement quality over time. Ergonomic aspects and straightforward controls make the instrument suitable for machinists and quality technicians who need reliable, repeatable readings without complex setup. For a detailed specification and to discuss the Microtech Metrology workshop caliper with its ISO 17025 calibration, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 to arrange a technical consultation or tailored quotation Technical data Article number: 141020216 GTIN: 4061905038983 Manufacturer: Microtech Metrology Facts Measurement range: 0–2,000 mm Measuring force: 1–20 N Jaw length: 150 mm Display: 2.4" colour touchscreen Special features Digital data output via Wireless and USB Fine adjustment mechanism Handcrafted measuring jaws Delivered calibrated to ISO 17025 with certificate FAQ What measurement range does the caliper cover? The workshop caliper covers a measuring range of 0–2,000 mm, making it suitable for large-format components. Is a calibration certificate included with delivery? Yes, the instrument is delivered fully calibrated to ISO 17025 and includes the calibration certificate for traceability. How can measurement data be exported from the caliper? Data can be transferred wirelessly or via USB to inspection software or data logging systems for seamless documentation. Are the measuring faces robust enough for regular workshop use? The caliper features handcrafted measuring jaws designed for durability and consistent contact geometry in daily inspection tasks. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
200mm Digital Caliper 75mm Jaws Fine Adjustment 0.01mm Display Stainless Steel In Plastic Case - Metav IndustryLine
Take advantage of a hardened stainless-steel construction combined with a precise digital display and a smooth fine adjustment for reliable workshop measurements; the factory tolerance of 0.03 mm ensures consistent repeatability. Order the device directly via Metav Werkzeuge or consult the Metav team for application-specific advice. Digital Caliper M217.050.N — 200 mm, fine adjustment (Metav IndustryLine) The Digital Caliper M217.050.N is a 200 mm workshop caliper with digital readout, fine adjustment and hardened stainless-steel construction, designed for routine precision measurement in metalworking and maintenance environments. 200 mm measuring range for workshop use Hardened stainless-steel construction Fine adjustment for smooth, precise positioning Digital display with ON/ZERO/UNIT/HOLD Reliable reach and repeatable accuracy for the workshop The caliper sits in the Standard class (measuring range up to 100–300 mm) and provides a balanced combination of reach and stiffness that suits general machining and quality-control tasks. With a measuring span of 200 mm and a display resolution of 0.01 mm (0.0005 in), the instrument delivers repeatable readings that speed up routine checks and reduce rework. The declared factory standard 0.03 mm gives a transparent performance expectation for incoming inspection and first-article checks, supporting efficient decision-making on the shop floor. Faster measurement cycles with a clear, usable display A tactile fine adjustment mechanism permits controlled jaw movement for delicate positioning, while the digital display with ON/OFF, ZERO, UNIT and HOLD functions simplifies readout and recording. Inch/metric switching is available, with the inch resolution shown as 0.0005 in, so mixed-measurement workflows are supported without conversion errors. The instrument includes a 3 V power system for stable operation and a dedicated RB 5 data output for straightforward digital transfer to collection systems, reducing manual transcription and improving traceability in production logs. Durable build for everyday industrial use Manufactured from fully hardened stainless steel, the caliper resists wear and maintains alignment under repetitive use; the 75 mm jaw length provides secure contact for general external and internal measurements while the design omits a scribing tip for straightforward handling. At approximately 0.8 kg, the tool balances robustness with manoeuvrability, making it suitable for bench use and carried inspection rounds. The construction and controls were chosen to lessen operator influence on results and to provide a dependable measuring routine across shifts. For dependable everyday precision, specify the Metav IndustryLine Digital Caliper M217.050.N — contact Metav Werkzeuge GmbH in Emmerich for technical consultation or a tailored offer via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M217.050.N GTIN: 4054469159720 Label: Digital caliper, 200 x 75 mm, without scribe, 3 V INOX, fine adjustment, factory standard 0.03 mm Core specifications Measuring range: 0–200 mm Resolution: 0.01 mm / 0.0005 in Jaw length: 75 mm Weight: 0.8 kg Factory tolerance: 0.03 mm Power supply: 3 V Special features Material: fully hardened stainless steel Fine adjustment for precise jaw positioning Digital display with ON/OFF, ZERO, UNIT, HOLD Data output: RB 5 No scribing tip FAQ What accuracy can be expected from this caliper? The instrument carries a factory standard of 0.03 mm; combined with the 0.01 mm display resolution this provides dependable repeatability for standard workshop quality control. Is the display able to switch between metric and imperial units? Yes — the caliper’s digital readout supports unit switching; imperial readings show a resolution of 0.0005 in. Does the caliper support data transfer to a PC or measuring system? The device includes an RB 5 data output for digital transfer, enabling straightforward capture of measurements into compatible systems. What is the benefit of the fine-adjustment feature? Fine adjustment permits controlled, slow movement of the jaws, improving contact positioning and reducing measurement scatter when measuring small or delicate features. Is this instrument suitable for routine shop-floor inspections? Yes — the hardened stainless-steel construction and balanced 200 mm reach make it well suited to everyday inspection and workshop use. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200mm Precision Caliper For Outside, Inside And Step Measurements, Hardened Stainless Steel, Fine Adjustment, DIN 862 - Metav IndustryLine
Take advantage of a workshop-grade tool that combines robust monoblock construction, hardened stainless steel and a finely tuned vernier for dependable everyday measuring. Choose direct procurement via Metav Werkzeuge or consult Metav’s specialists for specification support. M201.310 Workshop caliper — 200 mm analogue caliper with fine-adjustment (Metav IndustryLine) The M201.310 Workshop caliper is an analogue measuring instrument designed for general machine‑shop and metalwork tasks, offering a 200 mm measuring range and a fine‑adjustment carriage for controlled, repeatable measurement. 200 mm workshop caliper range Analogue vernier, fine-adjustment carriage Hardened stainless steel, matt-chromed scale Designed for external, internal and step measurements Dependable workshop precision for everyday control Built to the DIN 862 workshop standard, this caliper delivers the range and stiffness that workshops need for routine quality checks. The 200 mm measuring span represents the practical balance between reach and rigidity, making the instrument well suited to general machine‑building and metal‑working tasks. The monoblock construction increases resistance to twist and wear, which improves repeatability for cyclical measurements and reduces setup time during production runs. Clear mechanical graduation and controlled sliding action The analogue vernier arrangement gives mechanically verifiable graduations: a dual-scale configuration (upper scale 1/1000" and lower scale 1/50 mm) provides fine reading capability with a bottom-scale resolution equivalent to 0.02 mm, the recognised industrial standard for mechanical verniers. The fine‑adjustment carriage allows small, smooth movements so measurements can be taken without overshoot, improving consistency when gauging fits, diameters or step heights. Durable materials and workshop‑ready finishing Manufactured from hardened stainless steel with a matt‑chromed scale, the caliper resists corrosion and keeps reflective glare to a minimum for easier reading under workshop lighting. The material selection and surface finish reduce long‑term wear on the measuring faces and the scale, preserving accuracy and minimising maintenance interventions over the product life cycle. Versatile measuring functions for common shop tasks Configured for external, internal and step measurements, the instrument covers the four essential caliper operations required in daily shop work. The straightforward mechanical design makes interpretation immediate and training minimal, so workers can focus on process control rather than instrument complexity. Where mechanical vernier evidence is preferred over electronic readouts, this type keeps data interpretation transparent and audit‑friendly. For robust, workshop‑grade precision from Metav IndustryLine, contact Metav Werkzeuge for tailored advice and direct procurement from Emmerich. Technical data SKU: M201.310 GTIN: 4054469101309 Brand: Metav IndustryLine Standard: DIN 862 Numbers / Core technical data Measuring range: 0–200 mm Jaw length: 60 mm Vernier / nonius: top 1/1000", bottom 1/50 mm Customs tariff number: 90173000 Special features / Design Monoblock design Hardened stainless steel, matt-chromed scale Fine-adjustment carriage Analogue vernier (mechanical) No pointed measuring tip (without tip) Suitable for external, internal and step measurements FAQ What measuring range does this caliper cover? The M201.310 workshop caliper covers a measuring range of 0–200 mm, making it a standard workshop instrument for general machine‑building measurements. How precise is the analogue graduation on this caliper? The instrument uses a dual vernier: the lower scale corresponds to a 1/50 mm graduation (≈0.02 mm), aligning with common mechanical vernier precision in industrial use. Is the caliper suitable for internal and step measurements? Yes; the design is intended for external, internal and step measurements, so it handles the typical set of shop measurement tasks. What material is used for the measuring faces and scale? The caliper is made from hardened stainless steel with a matt‑chromed scale to enhance durability and reduce glare during reading. Does the M201.310 include a fine‑adjustment mechanism? Yes; a fine‑adjustment carriage is fitted to permit controlled sliding and precise setting of the jaws during measurement. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200mm Precision Caliper Without Probe Fine Adjustment Hardened Stainless Steel 0.05mm Resolution, Supplied in Case - Metav IndustryLine
Robust, low‑maintenance shop measurement with hardened stainless steel construction and a fine‑adjustment slide for repeatable results; combine 0–200 mm reach with 0.05 mm vernier precision for reliable everyday inspection. Order the workshop caliper directly via Metav Werkzeuge or request application advice from our consultants. Workshop caliper M201.320 — analogue vernier, 0–200 mm, hardened stainless steel The Workshop caliper M201.320 is an analogue vernier caliper designed for universal shop use, offering a compact jaw length and a fine‑adjustment mechanism for controlled, repeatable measurements in standard workshop environments. Hardened stainless steel construction 0–200 mm measuring range Analogue vernier, 0.05 mm resolution Fine‑adjustment screw for exact sliding Dependable measurement range for everyday workshop tasks The M201.320 is classified in the Standard size class thanks to its 0–200 mm range, which makes it a versatile instrument for general engineering, metalwork and maintenance tasks. The combination of compact jaw geometry and monoblock construction reduces flexing during handling, delivering consistent readings across typical shop workpieces. This design balances reach with handling comfort, supporting efficient throughput in repetitive inspection routines while maintaining robust mechanical stability. Vernier system and fine adjustment for repeatable readings Equipped with an analogue vernier that features a 1/20 mm bottom scale, the caliper provides a practical 0.05 mm reading increment suitable for standard quality control. The additional 1/128" inch scale allows cross‑referencing in mixed‑unit environments. The integrated fine‑adjustment screw permits controlled sliding for careful closing on features, reducing reading variability caused by hand pressure. Together these elements make the instrument suitable for machinists who require clear, repeatable measurements without electronic dependency. Hardened materials and workshop durability Constructed from hardened stainless steel with a matt‑chromed scale, the caliper resists corrosion and wear from daily shop use while keeping scale legibility high. The monoblock slide and robust jaw geometry are engineered for frequent operation, reducing maintenance cycles and downtime. Conformity with DIN 862 (for jaw lengths up to 200 mm) ensures the tool meets recognised mechanical measurement standards, supporting traceable inspection procedures and predictable performance in industrial settings. Practical handling and application focus The instrument’s modest jaw length and balanced form factor make it straightforward to handle during repetitive checks of shafts, housings and assembled fixtures. As an analogue workshop caliper, it requires no batteries or electronics, which simplifies storage and long‑term reliability under workshop conditions. The clear vernier layout and tactile fine‑adjustment help technicians achieve reproducible results during incoming inspection, set‑up verification and routine maintenance tasks. For dependable shop‑floor precision choose the Metav IndustryLine caliper M201.320 — contact Metav Werkzeuge for tailored advice, specification checks or to request delivery via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: M201.320 GTIN: 4054469101408 Manufacturer: Metav IndustryLine Category: Calipers Facts Measuring range: 0–200 mm Resolution: 0.05 mm (vernier 1/20 mm) Vernier: 1/128" (top), 1/20 mm (bottom) Jaw length: 60 mm Tariff number: 90173000 Special features Material: hardened stainless steel with matt‑chromed scale Monoblock construction Fine‑adjustment screw included Analogue vernier with inch and mm scales Complies with DIN 862 for jaw length up to 200 mm FAQ How precise is the reading on this caliper? The workshop caliper M201.320 delivers 0.05 mm resolution via its vernier (1/20 mm) and is intended for standard shop‑floor precision checks. Is the instrument suitable for both inside and outside measurements? Yes, the M201.320 is designed for outside, inside and step measurements using the appropriate jaws and the analogue vernier scale. Does the caliper meet a recognised standard? The caliper conforms to DIN 862 for jaw lengths up to 200 mm, ensuring standardised mechanical measurement characteristics. What advantages does the fine‑adjustment provide? The fine‑adjustment screw on the M201.320 enables controlled sliding and repeatable contact pressure, improving measurement consistency during repetitive inspection tasks. Can the vernier be read in inches and millimetres? The instrument includes both a 1/128" inch scale and a 1/20 mm vernier, allowing cross‑reference between imperial and metric readings. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200mm Werkstatt-Messschieber, 0,05mm, Werksnorm - Metav IndustryLine
Der von Ludwig Josef Bayer 1989 gegründete Traditionsvertrieb von Messwerkzeugen steht mit seiner Eigenmarke Metav IndustryLine für Premium-Messwerkzeuge zu einem kleinem Preis. HIGHLIGHTS Messbereich: bis 200mm Ablesung: 0,05mm Material: rostfreier Stahl, Skala und Nonius mattverchromt leichte Ausführung Im Fluss messen Der Messbereich von 0 bis 200mm bringt die nötige Reichweite für typische Bauteile auf den Punkt. Prüfungen gelingen direkt am Werkstück, auch wenn Formen variieren. Im allgemeinen Maschinen- und Metallbau sorgt dieser Bereich für eine sichere Orientierung über den gesamten Prozess. Die Ergebnisse bleiben nachvollziehbar und konsistent. Das reduziert Nacharbeit und unterstützt saubere Übergaben zwischen Arbeitsschritten. Schauen Sie hier, wie wir die Messbereiche klassifiziert haben. Klassifizierung Messbereiche beim Messschieber.. Ausführung Werksnorm Verlassen Sie sich auf Präzision, die weltweit Standards setzt: Unser Metav IndustryLine Werkstatt-Messschieber erfüllt die Anforderungen der Werksnorm in jedem Detail – von der Materialauswahl über die Fertigung bis hin zur Kalibrierung. Damit garantieren wir exakte Messergebnisse, internationale Zertifikate und höchste Akzeptanz bei Audits und Kundenabnahmen. Qualität, der Sie vertrauen können. Ausführungsdetails für Werkstatt-Messschieber von Metav IndustryLine: Marke: Metav IndustryLine Bezeichnung: Werkstatt-Messschieber leichte Ausführung Bestellnummer: M201.373 Zahlen zum Werkzeug: Messbereich: 0-200mm Gewicht: 0,8kg Norm: Werksnorm Schnabellänge: 60/36mm Ablesung: 0,05mm Ablesung in Inch/Zoll: 1/128 Ausführungen Ausführung: analog Material: rostfreier Stahl, Skala und Nonius mattverchromt leichte Ausführung Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com Worauf es beim Messschieberkauf ankommt: Zusatzfunktionen wie Datenausgangsoptionen oder die Regelung der Messkraft sind neben der Genauigkeit und dem Messbereich essenziell. Der Gebrauch eines Messschiebers mit präzise abgestimmter Messkraft erweist sich insbesondere im Bereich der Qualitätssicherung und innerhalb von Laboren als vorteilhaft. Ferner darf man nicht vergessen zu prüfen, ob der Messschieber schon kalibriert sein muss. Die Möglichkeit zur Kalibrierung besteht unmittelbar bei Entgegennahme; zur Sicherstellung der Prozessstabilität sollte regelmäßig jährlich neu kalibriert werden.
200mm Werkstatt-Messschieber, 0,05mm, Werksnorm - Metav IndustryLine
Das 1989 gegründete Traditionsunternehmen für den Vertrieb von Messwerkzeugen steht mit seiner Eigenmarke Metav IndustryLine für hevorragende Messwerkzeuge zu einem überzeugenden Preis. Im Fluss messen: 0 bis 200mm 200mm schaffen genau die Reichweite, die im Alltag am häufigsten gebraucht wird. Von der Vormontage bis zur Endprüfung bleibt der Zugriff auf relevante Maße erhalten. Der Bereich passt zu den Anforderungen im Maschinen- und Metallbau und sorgt für gleichmäßige Qualität. Messfolgen bleiben übersichtlich und planbar. Das reduziert Stillstände und hält Projekte auf Kurs. Schauen Sie hier, wie wir die Messbereiche klassifiziert haben. Klassifizierung Messbereiche beim Messschieber.. Werksnorm Unser Werkstatt-Messschieber wird vollständig nach den einschlägigen DIN-Normen gefertigt – sämtliche Materialien, Fertigungs- und Kalibrierverfahren entsprechen den Anforderungen der Werksnorm. Damit sind Maßhaltigkeit und Wiederholgenauigkeit garantiert, Prüfzertifikate sind international kompatibel, und Audits oder Kundenfreigaben lassen sich deutlich schneller durchlaufen. Die DIN-Konformität sichert konstante Qualität, erleichtert die weltweite Einsetzbarkeit und stärkt das Vertrauen in jedes einzelne Messergebnis. Profi-Empfehlung: Führe Messungen immer unter gleichen Bedingung aus. Im Idealfall im einem Messlabor, das 20° Celsius vorhält. Sie sind unsicher, ob das Werkzeug zu Ihrer Anwendung passt?? Oder es fehlen Ihnen noch technische Daten?? Kein Problem, sprechen Sie uns an!! 📧 eMail: info@metav-werkzeuge.com, ☎️ Telefon: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Eigenschaften für Werkstatt-Messschieber von Metav IndustryLine: Marke: Metav IndustryLine Bezeichnung: Werkstatt-Messschieber leichte Ausführung Bestellnummer: M201.370 Fakten: Messbereich: 0-200mm Gewicht: 0,7kg Norm: Werksnorm Schnabellänge: 60mm Ablesung: 0,05mm Ablesung in Inch/Zoll: 1/128 Besonderheiten Ausführung: analog Material: rostfreier Stahl, Skala und Nonius mattverchromt leichte Ausführung Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com Zu beachtende Faktoren beim Erwerb eines Messschiebers: Zugleich mit der Präzision und dem Messbereich sind die Berücksichtigung von Features wie Datenexport und Messkraftkontrolle unerlässlich. Der Gebrauch eines Messschiebers mit präzise abgestimmter Messkraft erweist sich insbesondere im Bereich der Qualitätssicherung und innerhalb von Laboren als vorteilhaft. Ferner darf man nicht vergessen zu prüfen, ob der Messschieber schon kalibriert sein muss. Bereits bei der Zustellung ist eine Kalibrierung möglich, und für die Garantie der Prozesssicherheit sollte diese jährlich wiederholt werden. Pflegehinweis - damit Sie lange etwas von Ihrem Werkstatt-Messschieber haben: Werkstatt-Messschieber leben viele Jahrzehnte, wenn du sie sauber, leicht eingeölt, korrekt gelagert und regelmäßig geprüft hälst. Vermeide aggressive Lösungsmittel oder dicke Ölschichten, wische nach jedem Einsatz mit einem fusselfreien Tuch nach, schütze die Führungen mit einem Mikrofilm aus Instrumentenöl (z. B. Starrett M-1), lagere das Werkzeug trocken in seinem Etui mit leicht geöffneten Messflächen – am besten mit einem Silicagel-Beutel – und überprüfe Nullpunkt, Messflächen und Gleitspiel nach ISO-Temperaturnorm (20 °C).
200mm Workshop Caliper With Pointed Jaws 0.05mm Resolution Fine Adjustment Monoblock, Hardened Stainless Steel, Supplied In Case - Metav IndustryLine
Take advantage of the combination of 200 mm measurement range, hardened stainless-steel construction and a smooth fine-adjustment screw for reliable, repeatable workshop measurements; order the caliper directly via Metav Werkzeuge or ask our consultants for tailored technical advice. M201.330 Workshop Caliper — 200 mm, hardened stainless steel, fine-adjustment (Metav IndustryLine) A M201.330 workshop caliper designed for standard workshop tasks up to 200 mm, offering vernier precision for external, internal and step measurements. 200 mm measurement range, workshop standard Hardened stainless steel with matt-chrome scale Fine-adjustment screw for precise positioning Monoblock design for enhanced rigidity Precision that suits everyday workshop control The 200 mm measurement span places this instrument firmly in the standard class of calipers, balancing reach and stiffness for general mechanical and metalworking tasks. The analogue vernier provides a practical reading resolution of 0.05 mm, which corresponds to the established industrial expectation for mechanical calipers and supports reliable dimensional checks on components, fixtures and assemblies. Where quick verification and straightforward repeatability matter, the scaled vernier and clear graduation reduce interpretation errors and keep inspection loops efficient. Built for durability and readability in production environments A hardened stainless-steel body with a matt-chrome scale resists wear and reduces glare, improving legibility under harsh workshop lighting. The monoblock construction increases structural stiffness so that measurements remain consistent during everyday handling and moderate knocks. Pointed measuring tips extend the tool’s usefulness for fine contact points and narrow grooves, while the overall build supports long-term durability and lower maintenance compared with plated or softer materials. Smooth handling increases measurement confidence The integrated fine-adjustment screw allows controlled closure of the jaws and precise positioning on the workpiece, preventing overrun and unwanted pressure that can distort readings. Dual vernier readings (imperial on the upper scale, metric on the lower) combine flexibility with clarity: the instrument carries a 1/128" indication on the upper vernier and 1/20 mm on the lower, making conversion-free checks possible when imperial and metric references are mixed. Conformity with DIN 862 for jaw length up to 200 mm ensures production compatibility and adherence to familiar workshop standards. Contact Metav Werkzeuge for specialised advice on the M201.330 workshop caliper — our Emmerich-based precision experts will help match the instrument to application requirements or provide supplementary technical documentation Technical Data Article number: M201.330 GTIN: 4054469101637 EClass: 21170344 Tariff number: 90173000 Brand: Metav IndustryLine Facts Measurement range: 0–200 mm Jaw length: 60 mm Resolution: 0.05 mm Vernier: 1/128" (upper) / 1/20 mm (lower) Special features Hardened stainless steel with matt-chrome scale Monoblock construction Fine-adjustment screw Pointed measuring tips Complies with DIN 862 for jaw length up to 200 mm Analogue mechanical vernier FAQ How precise is the M201.330 for routine workshop measurements? The M201.330 provides a vernier resolution of 0.05 mm and is built to deliver consistent repeatability for standard workshop control tasks up to 200 mm. Which measurement types can this caliper perform? It supports external, internal and step measurements, with specialised pointed tips for accessing narrow features. Is the scale readable in bright workshop lighting? Yes, the matt-chrome scale minimises reflection and, together with the hardened stainless-steel body, keeps graduations legible over extended use. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200mm Workshop Caliper Without Tip 60mm Jaw 0.05mm Vernier Stainless Steel, DIN 862 - Metav IndustryLine
Benefit from the combination of stainless‑steel durability, precise 0.05 mm vernier reading and a compact 200 mm measuring range for smooth workshop control; order the caliper directly via Metav Werkzeuge or consult our advisors for specification support. Workshop Vernier Caliper M201.390 – 200 mm, 0.05 mm vernier (Metav IndustryLine) The Workshop Vernier Caliper M201.390 is a robust analogue caliper for everyday machine‑shop measurements up to 200 mm, designed for fast, repeatable checks in production and maintenance environments. Analogue vernier with 0.05 mm resolution Stainless steel body, matt chrome scale and vernier 200 mm measuring range for workshop applications 60 mm long jaws for stable external clamping Reliable workshop accuracy for everyday measurement The M201.390 delivers workshop‑grade precision with a vernier resolution of 0.05 mm (also readable as 1/128 inch), which aligns with common industrial practice for mechanical calipers. As a standard‑range instrument it covers the typical needs of machine shops and metalworking tasks without compromising stiffness or handling. Compliance with DIN 862 ensures that readings are comparable to established metrology expectations, so measurements taken for setup, in‑process checks or maintenance feed directly into quality control workflows with minimal interpretation required. Robust construction for daily workshop use A body of stainless steel with a matt‑chrome scale and vernier provides corrosion resistance and clear contrast for long service life. The 60 mm jaw length increases contact area for stable external measurements, reducing tilt and local deformation on softer workpieces. At approximately 0.7 kg, the caliper balances feel and solidity, making one‑handed operation comfortable while maintaining the stiffness needed for reproducible results. These construction choices lower the need for frequent replacement and support reliable production throughput. Simple vernier operation speeds routine checks Being an analogue, non‑electronic tool, the caliper avoids dependency on batteries or electronics and is immediately available for rapid checks. The vernier scale principle converts fine graduations into a readable fractional scale—readable to 0.05 mm—so routine dimensional checks can be executed quickly without menu navigation. This directness translates into time savings for repetitive inspection tasks and a lower lifecycle cost compared with battery‑powered alternatives, while still offering the precision expected in everyday quality control. Practical benefits for workshop workflows Integrating this caliper into workshop routines improves first‑article checks, quick go/no‑go examinations and fitting tasks through its combination of reach and robustness. The 200 mm measuring range is the workshop standard that balances reach with rigidity, making it suitable for components, housings and assemblies commonly encountered in mechanical engineering and maintenance. The straightforward design facilitates operator training and consistent measurement technique, which supports traceable processes and reduces scrap from incorrect fits. Contact Metav Werkzeuge for personalised advice on the Metav IndustryLine 200 mm vernier caliper and secure dependable delivery from Emmerich Technical Data SKU: M201.390 GTIN: 4054469102085 Label: Werkstatt-Messschieber ohne Spitze 200x60x0,05mm rostfrei Facts Measuring range: 0–200 mm Resolution: 0.05 mm (1/128 inch) Weight: 0.7 kg Jaw length: 60 mm Tariff number: 90173000 Special features Material: stainless steel; scale and vernier matt chrome plated Type: Analogue vernier caliper Standard: DIN 862 Design: without tip (no spike) Brand: Metav IndustryLine FAQ How precise is the caliper for general workshop use? The M201.390 provides a vernier resolution of 0.05 mm, which corresponds to the industrial standard for analogue calipers and is suitable for most machine‑shop and workshop measurements. Can this caliper be used for internal and external measurements? Yes, the analogue vernier caliper design supports internal and external measurements as well as depth checks within its 0–200 mm range. Is a calibration certificate supplied with the tool? This workshop caliper is not listed as delivered with an ISO 17025 certificate; standard factory specification applies unless an explicitly calibrated variant is requested. What makes the construction suitable for workshop environments? The stainless‑steel construction with matt‑chrome scale and vernier offers corrosion resistance and visual contrast, while the 60 mm jaws and overall stiffness ensure reproducible contact during daily use. How does the analogue vernier compare to a digital caliper in a production setting? Analogue vernier calipers like the M201.390 require no batteries, offer immediate readability for trained staff and provide a durable option for routine checks; digital calipers can offer finer resolution and data output but add complexity and maintenance. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200mm Workshop Precision Caliper With Pointed Jaws 0.05mm Resolution, DIN 862 - Metav IndustryLine
Take advantage of a workshop instrument that combines robust stainless steel construction, a practical 200 mm measuring range and a reliable 0.05 mm vernier resolution for consistent routine control. The caliper’s matt‑chrome scale and DIN 862 compliance support reproducible readings and reduced rework. Order the M201.393 directly via Metav Werkzeuge or consult our specialists for application advice. M201.393 Workshop Vernier Caliper — 200 mm, 0.05 mm resolution (Metav IndustryLine) M201.393 is a purpose-built workshop caliper for everyday mechanical measuring tasks, offering analogue vernier precision and durable stainless‑steel construction. Robust stainless steel construction 200 mm measuring range 0.05 mm vernier resolution Conforms to DIN 862 Reliable measurement for everyday workshop tasks The M201.393 is engineered as a practical workshop caliper that balances reach and stiffness with a 200 mm measuring range appropriate for typical machine‑shop and metalworking tasks. The analogue vernier system provides a clear 0.05 mm graduation, which aligns with industrial expectations for mechanical calipers and supports rapid, repeatable checks during production. Because the scale and vernier are matt chrome plated, reflections are minimised and legibility is improved in workshop lighting, reducing reading errors and speeding up inspection routines. Durable design that tolerates rough handling Constructed from stainless steel, the slide and jaws resist corrosion and stand up to the knocks of daily use. The asymmetric jaw lengths (60/40) combine firm external‑measuring faces with compact internal jaws for confined spaces; the 60/40 jaws improve access to shoulders and grooves without sacrificing stability. The instrument’s mass contributes to steady handling — lightweight enough for single‑handed work yet substantial enough to dampen vibration during measuring. This robust build translates into lower replacement frequency and fewer production interruptions. Precision aligned with recognised standards Compliance with DIN 862 characterises the M201.393 as suitable for workshop quality control rather than laboratory certification. The 0.05 mm vernier resolution corresponds to standard mechanical accuracy classes and is adequate for routine dimensional checks on machined parts, fixtures and assemblies. The analogue format keeps the measuring principle simple and serviceable: wear can be assessed visually and adjustment made in situ, which preserves long‑term reliability in a busy production environment. Clear, practical features for faster workflows The matt‑chrome scale and the clearly graduated vernier reduce interpretation time and support faster decisions on the shop floor. The balanced jaw geometry and robust slide enable steady contact pressure for consistent readings; this is important where repeatability matters more than submicron resolution. The caliper’s workshop focus makes it a straightforward choice when a dependable, easy‑to‑maintain measuring tool is required for daily inspection and fitting tasks. Secure reliable measurements with Metav IndustryLine’s stainless‑steel M201.393 — contact Metav Werkzeuge in Emmerich for tailored advice and prompt supply: info@metav-werkzeuge.com | +49 2822 7131930 Technical Data Article number: M201.393 GTIN: 4054469102122 Label: Werkstatt-Messschieber mit Spitze 200x60x0,05mm rostfrei Manufacturer: Metav IndustryLine Facts Measuring range: 0–200 mm Resolution: 0.05 mm Inch resolution: 1/128 in Weight: 0.8 kg Jaw length: 60/40 mm Special features Material: stainless steel Scale and vernier: matt chrome‑plated Analogue vernier caliper Conforms to DIN 862 FAQ What measuring range does this caliper cover? The M201.393 covers a measuring range of 0–200 mm, making it suitable for standard workshop tasks and routine dimensional checks. What is the smallest graduation and typical accuracy of this analogue caliper? The vernier provides a 0.05 mm graduation; this class of mechanical caliper is intended for workshop accuracy consistent with DIN 862. Is the instrument suitable for corrosive environments? The M201.393 is made from stainless steel, which increases resistance to corrosion compared with plain carbon steel and is appropriate for typical workshop atmospheres. Can the caliper measure internal and external diameters? Yes, the design of the jaws allows both external and internal measurements; the 60/40 jaw geometry also facilitates measurements in confined spaces. Does this caliper include a certification or calibration report? This listing does not indicate an ISO 17025 calibration certificate; the M201.393 is supplied as a workshop instrument conforming to DIN 862. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
2500mm Digital Precision Caliper Colour Touchscreen Wireless USB ISO 17025 Calibration Roll Case - Microtech Metrology
Take advantage of the combination of an extra‑long 0–2,500 mm measuring range, integrated colour touchscreen and wireless + USB data output for consistent large‑format measurement and faster data capture; delivered fully calibrated to ISO 17025 for traceable quality control. Order the caliper directly via Metav Werkzeuge or ask our consultants for application advice. Messschieber — Extra‑long precision caliper with colour touchscreen and wireless + USB Messschieber is an extra‑long, digitally equipped precision caliper intended for large‑format components and quality control applications in industrial metrology. Extra‑long 0–2,500 mm measuring range Colour 2.4" touchscreen display Wireless and USB data output Delivered calibrated with ISO 17025 certificate Built for reproducible measurement of large components Designed as an extra‑long measuring instrument, this caliper covers a measuring range up to 2,500 mm, making it suitable for large assemblies, housings and pipe work where long, straight measurements are required. The aluminium construction keeps the gauge manageable while maintaining profile stiffness over its length; the 1,000 mm jaw length gives a practical contact area that helps secure stable measurements. This balance of reach and rigidity reduces the need for repeated setups and supports reproducible results across extended surfaces. Digital output and streamlined data capture for production workflows Equipped with a colour 2.4" touchscreen and both wireless and USB data transfer, the device integrates measurement capture directly into inspection routines and digital quality systems. The display provides clear numerical read‑out and straightforward menus, while the 0.01 mm resolution enables standard digital precision for logging and SPC. A controlled measuring force (1–20 N) range supports consistent contact pressure, reducing operator‑induced variation and simplifying data collection in repeated production checks. Calibrated and traceable for certified quality processes This measuring instrument is supplied fully calibrated in accordance with ISO 17025, including a calibration certificate for traceability and documentation within formal quality systems. The delivered certification supports audit readiness and lets the instrument be used immediately in inspection plans that require documented measurement capability. The stated accuracy of 0.14 mm should be considered in relation to application tolerances when specifying the caliper for critical dimensions. Practical handling and workshop compatibility The digital, aluminium body is engineered to be both robust and portable for workshop use, offering easier handling compared with heavier long‑span gauges. The integrated data interfaces remove manual transcription errors and accelerate hand‑over into measurement software or spreadsheets. As a digitally enabled precision instrument, it serves as a practical bridge between bench metrology and production line inspection, reducing administrative effort and supporting systematic quality control. For assistance selecting the right extra‑long caliper for a specific application or for ordering calibrated units from Microtech Metrology, contact Metav Werkzeuge to arrange a technical consultation and secure immediate delivery from Emmerich. Technical data SKU: 142125102 GTIN: 4061905037146 Manufacturer: Microtech Metrology Facts Measuring range: 0–2,500 mm Resolution (display): 0.01 mm Accuracy: 0.14 mm Measuring force: 1–20 N Jaw length: 1,000 mm Special features Material: Aluminium Display: Colour 2.4" touchscreen Data output: Wireless + USB Digital instrument Delivered calibrated to ISO 17025 FAQ Is this caliper suitable for measuring large assemblies and housings? The Messschieber from Microtech Metrology (SKU 142125102) is designed for extra‑long measurements up to 2,500 mm and is suitable for large assemblies where extended reach and reproducibility are required. What accuracy and resolution can be expected? The instrument provides a display resolution of 0.01 mm and the specified accuracy is 0.14 mm, values that should be matched against the tolerance requirements of the inspection task. How are measurement results exported for documentation? Measurement values can be exported via the built‑in Wireless interface or through USB, enabling straightforward transfer to quality management software or spreadsheets. Is a calibration certificate included with delivery? Yes — the caliper is supplied fully calibrated to ISO 17025 and includes the corresponding calibration certificate for traceability and audit purposes. What advantages does the aluminium construction provide? The aluminium design reduces weight for better handling over long lengths while providing sufficient stiffness for reproducible measurements and easier workshop use. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
2500mm Digital Precision Caliper With 2.4" Colour Touchscreen, Wireless/USB, ISO 17025 Calibrated - Microtech Metrology
Take advantage of the combination of an extra‑long 0–2500 mm measuring range, colour 2.4" touchscreen operation and Wireless + USB data output for efficient inspection of large components; the instrument is delivered fully calibrated to ISO 17025 with certificate. Order the digital caliper directly via Metav Werkzeuge or ask the consultants for application support. Digital Caliper by Microtech Metrology — 0–2500 mm, 2.4" Colour Touchscreen, Wireless + USB The Digital Caliper from Microtech Metrology is an extra‑long measuring instrument designed for large‑format inspection and workshop metrology, combining extended reach with traceable calibration and modern data connectivity. Extra‑long 0–2500 mm measuring range Colour 2.4" touchscreen display Wireless and USB data output Delivered calibrated to ISO 17025 Measure large components with repeatable precision This extra‑long instrument covers a 0–2500 mm measuring span, classifying it as an extra‑long caliper suitable for large shafts, pipes and assembly fixtures. The extended jaw geometry, with a 400 mm jaw length, gives the reach required for sizeable parts while the aluminium construction reduces handling weight and lowers operator fatigue during extended inspections. The specified accuracy of ±0.09 mm reflects design choices that favour robust, reproducible measurements across the full length; this makes the caliper well suited to heavy‑duty workshop tasks where reproducibility and manageable handling are priorities. Fast data capture and intuitive operation for workflow efficiency Equipped with a 2.4" colour touchscreen, the instrument provides a clear readout that improves legibility under workshop lighting and simplifies unit switching and zeroing. Data transfer is handled via wireless connectivity and USB, enabling direct logging into quality systems or handheld data collectors and reducing transcription errors. These features accelerate measurement cycles and strengthen process control, delivering a tangible efficiency gain for inspection routines and statistical process control. Traceable calibration and ready‑to‑use delivery The instrument is supplied fully calibrated and accompanied by an ISO 17025 calibration certificate, ensuring measurement traceability and easing incorporation into formal inspection procedures. Calibration to ISO 17025 supports acceptance in regulated environments and provides documented confidence for audits. With that certificate and robust connectivity, the caliper is ready for immediate integration into production quality checks or mobile inspection teams. Contact Metav Werkzeuge to discuss integrating the Microtech Metrology Digital Caliper with its extra‑long 0–2500 mm range and ISO 17025 calibration into existing measurement processes and to request technical advice or ordering details Technical data Article number: 142125142 GTIN: 4061905455650 Brand: Microtech Metrology Category: Digital caliper Key figures Measuring range: 0–2500 mm Accuracy: ±0.09 mm Jaw length: 400 mm Display: Colour 2.4" touchscreen Data output: Wireless + USB Features and materials Material: Aluminium Delivery: Supplied calibrated to ISO 17025 Digital display: Yes Suitable for large‑format workshop inspection FAQ What measuring range does this caliper cover? The Digital Caliper from Microtech Metrology covers a measuring range of 0–2500 mm, which places it in the extra‑long class for large components. Is the instrument delivered calibrated? Yes, the caliper is supplied fully calibrated and includes an ISO 17025 calibration certificate for traceable measurements and audit readiness. How is measurement data transferred from the caliper? Data can be exported wirelessly or via USB, allowing direct capture into inspection software or data loggers for faster quality control. What material is the caliper made from and why does it matter? The frame is made from aluminium, offering a balance of stiffness and lower weight to ease handling during long measurement tasks. Can this caliper be used for production quality control on large parts? Yes, the extra‑long reach, repeatable accuracy and direct data output make the instrument suitable for production inspection of large shafts, pipes and assemblies. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
2500mm Precision Caliper Digital Color 2.4" Touchscreen, Wireless/USB, ISO 17025 Calibrated - Microtech Metrology
Take advantage of the combination of an extra‑long 2,500 mm measuring range, a colour 2.4" touchscreen and full ISO 17025 calibration for reliable, traceable inspections of large assemblies; order the digital caliper directly via Metav Werkzeuge or ask our consultants if needed. Microtech Metrology digital caliper — extra‑long 2,500 mm range, colour 2.4" touchscreen The digital caliper is an extra‑long measurement instrument designed for large components and workshop integration, offering wireless and USB data transfer for streamlined inspection workflows. Extra‑long 2,500 mm measuring range Colour 2.4" touchscreen display Wireless and USB data output Delivered calibrated to ISO 17025 Aluminium frame with 600 mm jaw length Reliable measurement for large components An extra‑long range instrument provides the reach required for large flanges, housings and assemblies while preserving repeatability along the entire span. The instrument’s 2,500 mm measuring capability combined with a robust aluminium profile reduces bending and helps maintain alignment during long measurements. For production and quality control this means fewer measurement set‑ups and a lower risk of handling error, translating directly into time savings and consistent part acceptance. Fast integration and documented traceability Equipped with a colour 2.4" touchscreen and both Wireless and USB outputs, the caliper supports rapid data capture and plug‑and‑play connection to inspection software or data loggers. The tool is supplied fully calibrated according to ISO 17025, including a calibration certificate for traceable documentation. This combination shortens process chains, simplifies batch documentation and reduces manual transcription errors — a practical advantage for traceable quality records and audit requirements. Practical design for everyday workshop use The instrument balances reach and handling: a long jaw length of 600 mm provides access to recessed features while the lightweight aluminium construction keeps the device manageable on large parts. Controls are intuitive via the touchscreen, allowing operators to focus on measurement quality rather than menu navigation. Built for regular industrial use, the device supports efficient inspection routines and lower operator fatigue, which in turn helps reduce measurement variation over repetitive tasks. For reliable, large‑scale measurement and traceable results, contact Metav Werkzeuge to discuss the Microtech Metrology digital caliper (SKU 142125162) and arrange procurement or technical advice directly with our consultants. Technical data Article number: 142125162 GTIN: 4061905455667 Manufacturer: Microtech Metrology Core measurements Measuring range: 0–2,500 mm Resolution: 0.01 mm Display: Colour 2.4" touchscreen Jaw length: 600 mm Accuracy: 0.105 mm Special features Aluminium construction Wireless + USB data output Delivered calibrated to ISO 17025 Extra‑long range suitable for large components FAQ What measurement range does the caliper cover? The digital caliper covers a measuring range of 0–2,500 mm, making it suitable for large parts and assemblies (Microtech Metrology, SKU 142125162). Is the device delivered calibrated and traceable? Yes, the caliper is supplied fully calibrated to ISO 17025 and includes a calibration certificate for traceability and audit purposes. How can measurement data be transferred to inspection systems? Data transfer is available via Wireless and USB outputs; the colour touchscreen provides simple configuration for data export and integration. What material is the caliper made from and why does it matter? The frame is made from aluminium, which offers a favourable stiffness‑to‑weight ratio for long‑span measurements and easier handling on large components. Is this caliper suitable for routine workshop quality control? The combination of an extra‑long range, intuitive touchscreen and traceable ISO 17025 calibration makes it well suited for production quality control of large workpieces. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
Precision measurement for heavy components with workshop calipers
Workshop calipers, also described as heavy-duty calipers or industrial vernier calipers, are engineered for exact external and internal measurement on large workpieces. Designed for shipbuilding, rail vehicle manufacture and heavy plant assembly, these calipers deliver stable, repeatable readings even across extreme spans up to 10,000 mm (10 metres).
How these calipers perform in industrial practice
Built with an extremely distortion-free frame of hardened or weight-optimised special steel, workshop calipers maintain alignment across long reaches and heavy contact forces. They measure shafts, flanges and housings by combining robust jaws with optional measuring-force-limiting systems, fine micrometric slider adjustment and rounded internal measuring faces to reduce damage and measurement error. Available in analogue form with a fine vernier scale or as a digital variant with data output for direct integration into quality assurance systems.
Practical advantages that improve production
- Proven metrological stability for large components thanks to distortion-free construction.
- Hands-on ergonomics through measuring-force-limiting and precision fine adjustment, reducing operator error.
- Flexible data handling with digital data output for seamless quality documentation.
- Materials and design that withstand heavy workshop environments: hardened special steel or weight-optimised alternatives.
- Measurement range scalability up to 10,000 mm (10 metres) for XXL applications.
Why Metav is the sensible partner for these tools
Metav stands for the democratisation of precision and acts as a quality filter for the European market from its base in Emmerich. With over 48,000 customers and a portfolio exceeding 250,000 products, Metav combines long-standing expertise with a comprehensive range that simplifies procurement for industry and trade. In the field of workshop calipers, Metav’s assortment is positioned as the optimal choice, offering both analogue vernier solutions and modern digital models suitable for integration into industrial measurement workflows.
Core takeaway
For reliable dimensional control of oversized components, workshop calipers deliver measurable gains in repeatability, ergonomics and process integration—making them indispensable in heavy industry.
FAQ
What measuring ranges are available for workshop calipers?
Workshop calipers are offered for extreme tasks, with models covering spans up to 10,000 mm (10 metres) to accommodate large shafts, flanges and housings.
Can these calipers connect to quality assurance systems?
Yes. Many industrial vernier calipers are available with digital data output, enabling direct transfer of measurement values into QA systems for traceable documentation.
Which design features reduce operator-induced error?
Features such as a measuring-force-limiting system, a precise fine-adjustment mechanism and rounded internal measuring faces reduce variability and the risk of damaging components during measurement.
What materials ensure long-term stability for large-scale measurement?
Metav’s workshop calipers use hardened special steel or weight-optimised variants to ensure minimal distortion and lasting dimensional stability even under heavy use.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com