16mm Boring Bar For CCMT 0602 Inserts 52mm Cutting Length, 20mm Max Diameter - Teknik Makina
Benefit from precise internal turning with a robust indexable-insert boring tool offering a 16 mm shank and 52 mm cutting length for stable machining; order directly via Metav Werkzeuge or consult our specialists for application advice. Boring tool TKB088TM — 16 mm shank, compatible with WCMX 0302 inserts (Teknik Makina) the boring tool TKB088TM provides a compact, rigid solution for internal turning tasks in production and workshop environments 16 mm shank diameter 52 mm cutting length Compatible with WCMX 0302 inserts 100 mm overall length Rigidity and repeatability for internal machining The design focuses on stability and predictable performance. A 16 mm shank diameter reduces deflection during cuts, while the 52 mm cutting length keeps the centre of cutting forces close to the holder, which improves dimensional repeatability. Where indexable inserts are used, a secure seat and simple clamp mechanism mean fast insert changes and consistent tool geometry; this reduces downtime and contributes to a steady production rhythm. The relatively lightweight construction at 0.176 kg also simplifies handling during tool changes without compromising stiffness. Clear compatibility and practical handling This boring bar is specified for use with WCMX 0302 indexable inserts, which are widely available and easy to fit. The compatibility with standard insert formats enables cost-effective reconditioning of the cutting edge and straightforward inventory management. The tool’s 100 mm overall length and measured dimensions suit many internal turning setups on lathes and CNC turning centres; the maximum cutting diameter of 20 mm defines the working envelope and helps with machine setup and cycle planning. Technical users will appreciate the concise, measurable values that support reliable process planning. How the tool supports workshop productivity By combining a compact form with standard insert compatibility, this boring bar helps maintain cycle times and tool life across batch runs. The indexable-insert system lowers total machining cost by separating the cutting edge from the tool body, while the defined shank and cutting lengths ease repeatable clamping and calibration in toolholders. For procurement and production departments, the tool offers straightforward specification: clear numerical data enables quick comparison and integration into existing tool assortments, supporting efficient workshop logistics and consistent results on steel and similar turning applications. For application-specific advice or to secure supply from our Emmerich location, contact Metav Werkzeuge for expert guidance on using the 16 mm shank boring tool TKB088TM Technical data Article number: TKB088TM Manufacturer: Teknik Makina Designation: Ausbohrwerkzeug (boring tool) Facts Shank diameter: 16 mm Cutting length: 52 mm Maximum cutting diameter: 20 mm Overall length: 100 mm Weight: 0.176 kg Special features Compatible inserts: WCMX 0302 Indexable-insert concept Compact, rigid construction FAQ What insert types fit this boring bar? The boring tool TKB088TM is specified for WCMX 0302 indexable inserts, ensuring compatibility with widely available insert stocks. What is the effective cutting length of the tool? The tool provides a 52 mm cutting length, which determines the depth of internal machining and helps when planning tool reach and clearances. Which shank diameter is required for the toolholder? A 16 mm shank diameter is required; the shank size delivers the rigidity necessary for stable internal turning. What is the maximum bore diameter this tool can machine? The stated maximum cutting diameter is 20 mm, defining the recommended working range for internal turning operations. Is the tool suitable for automated insert changes? The indexable-insert design of the TKB088TM supports rapid insert replacement and repeatable clamping, which is compatible with standard workshop procedures for efficient changeover. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
16mm Boring Tool With 152mm Cutting Length, For WCMX 0302 Inserts - Teknik Makina
Benefit from precise internal machining with an indexable boring solution that combines a 16 mm shank and a maximum cutting diameter of 20 mm for reliable, repeatable results; order directly via Metav Werkzeuge or consult the team for application advice. Boring Bar TKB092TM — Indexable internal boring bar, 16 mm shank, Ø up to 20 mm (Teknik Makina) The Boring Bar TKB092TM is an indexable internal cutting tool designed for precision bore enlarging and finishing in CNC turning and lathe operations *Indexable for WCMX 0302 inserts *16 mm shank diameter *Cutting diameter up to 20 mm *152 mm effective cutting length Accurate internal finishing with indexable inserts The TKB092TM delivers controlled internal cutting by using widely available WCMX 0302 indexable inserts, which simplify tool setup and spare-part logistics. The combination of an exchangeable insert system and a solid tool body reduces downtime: when an insert is worn, replacement is fast and repeatability is restored immediately. This approach lowers overall machining cost per bore while maintaining consistent surface quality and diameter tolerance in series production. Rigidity and chip control for stable performance A 16 mm shank and a 152 mm cutting length provide a balance between accessibility and rigidity to reduce vibration during machining. The tool geometry supports predictable chip evacuation when used with the recommended insert type, which improves tool life and keeps cycle times steady. Specifying suitable clamping and minimising overhang enhances stability, leading to fewer reworks and more reliable batch throughput for production workshops. Simple integration into existing turning workflows Compatibility with WCMX 0302 inserts makes the tool straightforward to integrate into standard toolholders and changeover procedures. The bar’s overall length of 200 mm keeps reach adequate for common internal operations while remaining compatible with typical turret clearances. Choosing this indexable solution reduces inventory complexity compared with full solid-tool options and streamlines maintenance routines for shop-floor teams. Practical applications and productivity gains Optimised for internal boring and light finishing passes, the bar is suited to applications in general engineering, automotive subassemblies and any production requiring precise internal diameters up to 20 mm. The indexable system enables rapid adaptation between roughing and finishing by altering insert grades or geometries, delivering measurable cycle-time savings and consistent part quality across runs. Contact Metav Werkzeuge for tailored advice on deploying the Teknik Cutting Tools boring bar TKB092TM and to confirm stock availability from the Emmerich warehouse Technical Data Article number: TKB092TM Manufacturer: Teknik Makina Facts Cutting diameter max: 20 mm Shank diameter: 16 mm Cutting length (shaft cutting length): 152 mm Overall length: 200 mm Weight: 0.362 kg Special features Indexable boring bar design Compatible with WCMX 0302 inserts Intended for CNC turning/lathe internal operations FAQ What maximum bore diameter can be machined with this bar? The TKB092TM machines up to a 20 mm cutting diameter when fitted with the correct insert geometry and held with adequate rigidity. Which insert type is specified for the tool? Compatibility is provided for WCMX 0302 indexable inserts; the TKB092TM is designed to use this standard for easy replacement and a wide choice of grades. What shank diameter and reach does the bar offer? The boring bar has a 16 mm shank and a total length of 200 mm with a 152 mm effective cutting length, balancing reach and stiffness for internal operations. Is the tool suitable for finishing passes? Yes, the indexable configuration and available insert grades allow the TKB092TM to perform light finishing passes with consistent surface results. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
170-250mm Boring Tool For CCMT 1204 Indexable Inserts, 154mm Overall Length, 40mm Shank - Teknik Makina
Take advantage of a rigid, indexable solution that combines compatibility with CCMT 1204 inserts, a sturdy 40 mm shank and a wide bore capacity for efficient internal machining; order directly via Metav Werkzeuge or contact our consultants for tailored advice. Boring Tool TKB150TM – for CCMT 1204 indexable inserts, 40 mm shank (Teknik Makina) The Boring Tool TKB150TM is engineered for internal turning operations using CCMT 1204 indexable inserts and is suited to bore diameters in the mid-range, providing a compact overall length for confined tooling spaces. Compatible with CCMT 1204 inserts 40 mm shank for secure toolholding Diameter range 170–250 mm Torx T20 clamping screw M5x12 Consistent results through insert compatibility and predictable performance Built to accept CCMT 1204 indexable inserts, the toolholder guarantees repeatable geometry and rapid tool changes, which translates into predictable cycle times and reduced setup complexity. Using standard insert formats simplifies stock management and makes replacement routine straightforward; the result is improved process stability and fewer unexpected interruptions in production. Stable clamping and robust dimensions for uninterrupted machining A 40 mm shank and a compact overall length of 154 mm create a rigid connection to the machine spindle, reducing vibration and enhancing tool life. The clamping system employs a Torx T20 key with an M5x12 screw for positive, reproducible tightening, supporting reliable cutting forces and consistent chip control. The weight of 5.011 kg contributes to inertia that helps maintain cutting stability during internal turning. Faster servicing and lower process overhead The use of standard screw sizes and insert geometry reduces maintenance time and the requirement for special tooling. Quick insert swaps and straightforward torque application with the Torx T20 expedite routine servicing, which supports higher machine availability. This focus on operational efficiency helps workshops lower downtime without compromising the quality of the bore finish. Practical use cases and workshop integration Designed for mid-diameter internal turning, the tool is suitable for production runs and maintenance workshops that require a dependable indexable solution with limited overhang. The defined 170–250 mm diameter capability, combined with the compact profile, allows easy integration into existing tool setups while keeping inventory manageable thanks to standardised inserts and fixings. For reliable supply and specific application guidance on the Teknik Makina TKB150TM boring tool, contact Metav Werkzeuge for tailored recommendations and logistics support via info@metav-werkzeuge.com or telephone +49 2822 7131930 Technical data Article number: TKB150TM Manufacturer: Teknik Makina For inserts: CCMT 1204 Shank diameter: 40 mm Overall length: 154 mm Diameter range: 170–250 mm Weight: 5.011 kg Clamping screw: M5x12 (Torx T20) Core specifications Shank diameter: 40 mm Overall length: 154 mm Diameter range: 170–250 mm Weight: 5.011 kg Features Compatible with CCMT 1204 indexable inserts Torx T20 key interface Clamping screw M5x12 SKU: TKB150TM FAQ Is this tool compatible with CCMT 1204 inserts? Yes. The TKB150TM boring tool from Teknik Makina is designed specifically to accept CCMT 1204 indexable inserts for straightforward insert management. What shank diameter is required for this holder? The holder uses a 40 mm shank diameter, ensuring secure toolholding for internal turning tasks. What bore diameters can be machined with this tool? The tool covers a bore diameter range of 170–250 mm, making it suitable for mid-range internal machining applications. Which screw and key are used for insert clamping? Insert clamping is secured with an M5x12 screw tightened using a Torx T20 key for consistent torque and reproducible clamping. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
170mm Boring Bar For CCMT 1204 Indexable Inserts L208mm, 250mm Max Cut Diameter - Teknik Makina
Take advantage of precise deep-bore performance and reliable insert compatibility to keep production running smoothly; the combination of a 170 mm nominal diameter and a 208 mm overall length supports stable cutting in demanding internal turning operations. Order directly via Metav Werkzeuge or consult our specialists for tailored tooling recommendations. Boring Tool for CCMT 1204 Indexable Inserts — 170 mm Diameter, L208 The boring tool for CCMT 1204 indexable inserts is a heavy-duty internal turning solution intended for CNC lathes and conventional turning centres where wide-diameter boring and repeatable indexing are required. Compatible with CCMT 1204 inserts 170 mm nominal diameter for wide bores 208 mm overall length for deep reach Robust construction for vibration damping Precision and stability for large internal bores The design delivers consistent concentricity across extended bores by combining a substantial nominal diameter with a long shank. The 170 mm nominal size together with the 208 mm overall length provides the necessary reach for deeper internal operations while maintaining tool rigidity. This construction reduces deflection and improves surface finish on the workpiece, making the tool suitable for series production where repeatability is essential. The machining behaviour benefits from a stable cutting geometry that keeps insert engagement predictable, which in turn lowers rework rates and increases throughput. Faster indexable-insert changes and predictable tool life Using standard CCMT 1204 indexable inserts simplifies maintenance cycles and minimises downtime. Indexable inserts allow for quick rotation or replacement without the need to disturb the toolholder setup, which supports short setup times between batches. The system reduces per-part tooling costs because only the worn insert is replaced rather than the entire tool, and predictable insert seating ensures repeatable cutting data. For operations transitioning from conventional tooling, the insert format provides a straightforward route to improved productivity without complex requalification. Integration into workshop and CNC workflows The tool is engineered for straightforward integration with typical turning toolholders and boring assemblies, making it a practical choice for both dedicated machining cells and mixed-production shops. Compatibility with widely used insert geometries simplifies inventory management and aligns with lean tooling strategies. When planning fixture and holder selection, the tool’s dimensions and insert type should be matched to the machine’s turret or tool post to preserve rigidity and enable full utilisation of the tool’s cutting potential. Clear documentation of the tool’s technical parameters supports programming and process validation in industrial environments. Contact Metav Werkzeuge today for a tailored recommendation and availability check for the Teknik Makina boring tool TKB160TM to ensure optimal integration into the machining process. Technical Data Article number: TKB160TM Designation: Boring tool for CCMT 1204 indexable inserts Manufacturer: Teknik Makina Label: 170mm boring tool CCMT 1204 L208mm Eclass: 21181208 Key measurements Nominal diameter: 170 mm Overall length: 208 mm Maximum cutting diameter: 250 mm Special features Compatible inserts: CCMT 1204 Product type: Boring tool SKU: TKB160TM Category: Zerspanen FAQ What insert type does the tool use and why is it advantageous? The tool accepts CCMT 1204 indexable inserts; this insert format enables quick indexing, reduces downtime and simplifies spare-part management for series production. What are the typical applications for a 170 mm boring diameter? A 170 mm nominal bore is suitable for larger internal diameters on components produced on CNC lathes and conventional turning centres where stability and repeatable concentricity are required. Can the tool reach deep bores and still maintain rigidity? Yes, the 208 mm overall length is designed to access deeper internal features while the robust shank geometry helps maintain rigidity and reduce deflection during cutting. Is the tool suitable for automated production environments? The tool’s compatibility with standard insert geometry and predictable tool behaviour make it well suited to automated machining cells and serial production workflows. Manufacturer/Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
170mm Boring Tool CCMT 09T3 Inserts 48mm Cutting Diameter 25mm Shank - Teknik Makina
Benefit from a stable 25 mm shank, a 114 mm cutting length and CCMT 09T3 insert compatibility for reliable internal machining and reduced setup time. Order the (TKB114TM boring bar) directly via (Metav Werkzeuge) or ask our consultants if needed. Teknik Makina TKB114TM Boring Bar — Internal boring tool with CCMT 09T3 compatibility the TKB114TM boring bar is designed for accurate internal machining in production and workshop environments Compatible with CCMT 09T3 inserts Shank Ø25 mm for enhanced rigidity 114 mm cutting length for extended reach Overall length 170 mm for deep bore access Stable internal machining for consistent surface quality A robust shank diameter of 25 mm and a substantial 114 mm cutting length combine to deliver improved rigidity during internal operations. The design reduces vibration and deflection, which results in a more consistent surface finish and fewer rejected parts. By limiting tool movement under load, the holder supports repeatable bore geometry and steadier cycle times, which in turn lowers the need for downstream rework and improves process reliability in serial production. Faster cycles and lower downtime through insert compatibility Compatibility with CCMT 09T3 indexable inserts allows quick insert changes and straightforward re-grading of cutting edges, supporting rapid tool maintenance and minimal machine downtime. The tool’s 170 mm overall length provides the reach required for many internal bores while the balanced mass of 0.991 kg aids in handling and stability during mounting. Together, these attributes support productivity gains and pragmatic cost-efficiency by shortening changeover time and keeping machining operations moving. Practical handling and workshop integration The boring bar’s form factor is optimised for routine workshop workflows: a clearly defined shank diameter and standard insert interface simplify tool selection and inventory management. The holder fits established insert types, easing procurement and reducing the need for special tooling. Supplied by Teknik Makina and distributed via Metav Werkzeuge, the component arrives ready for integration on compatible tool posts and internal turning setups, backed by an experienced European supply chain. Confidence through trusted supply and service Sourcing via Metav Werkzeuge adds a pragmatic layer of assurance: long-standing distribution expertise, a large stocked range and central logistics from Emmerich support reliable replenishment and quality control. This combination of precise tooling and dependable supply reduces procurement risk and helps maintain continuous production—an advantage for workshops and small series manufacturers seeking affordable precision without compromise. For tailored advice on integrating the Teknik Makina TKB114TM into existing setups or to arrange supply from our Emmerich hub, contact Metav Werkzeuge by email or phone for a fast, expert response. Technical data Article number: TKB114TM Manufacturer: Teknik Makina Weight: 0.991 kg Shank diameter: 25 mm Cutting length: 114 mm Overall length: 170 mm Compatible inserts: CCMT 09T3 Max cutting diameter: 48 mm Numbers / Core technical data Shank Ø: 25 mm Cutting length: 114 mm Overall length: 170 mm Max cutting diameter: 48 mm Weight: 0.991 kg Special features / Versions Indexable insert interface CCMT 09T3 Designed as an internal boring bar Brand: Teknik Makina SKU: TKB114TM FAQ Which inserts fit this boring bar? The TKB114TM accepts CCMT 09T3 indexable inserts; this interface permits fast insert changes and use of standard grades. What reach does the holder provide for internal bores? With an overall length of 170 mm and a cutting length of 114 mm, the bar is suited to many medium-depth internal machining tasks. How does the TKB114TM improve stability during machining? The 25 mm shank diameter increases rigidity, reducing vibration and promoting consistent bore quality when the holder is correctly mounted. Is the TKB114TM available through Metav Werkzeuge? Yes; Teknik Makina tooling including the TKB114TM is supplied via Metav Werkzeuge and supported by their European logistics network. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
180mm Boring Bar for Finish Turning with CCMT 09T3 Indexable Inserts, 0.01mm Resolution - Teknik Makina
Take advantage of precise finishing and secure clamping for reliable internal turning operations; the combination of a 0.01 mm machining capability and compatibility with CCMT 09T3 indexable inserts supports a stable, high-quality production flow. Order directly via Metav Werkzeuge or consult the Metav team for application advice. THB101TM Boring Bar — Finishing Tool for CCMT 09T3 Indexable Inserts (Teknik Makina) A THB101TM boring bar engineered for precision finishing in internal turning, compatible with CCMT 09T3 indexable inserts and optimised for bores from 180 to 240 mm. Precision finish to 0.01 mm Compatible with CCMT 09T3 inserts Shank Ø40 mm for secure clamping Bore range 180–240 mm Achieve consistent tolerances with a tool built for finishing The THB101TM is designed for high-precision internal turning where repeatable results are essential. Its fine-machining capability of 0.01 mm enables the production of components that meet strict dimensional requirements, reducing the need for secondary grinding or rework. By focusing on consistent surface quality and dimensional stability, the tool helps maintain throughput while protecting final part integrity. This stability is especially critical in batch production where every part must match the same specification. Stable clamping and tool geometry for reduced vibration A robust shank Ø40 mm and a total length of 163.7 mm provide a controlled overhang and secure seat in the toolholder, which lowers the risk of chatter during finishing passes. Reduced vibration translates directly into a finer surface finish and longer insert life, delivering measurable productivity benefits. The assembly weight of 5.967 kg contributes to the bar’s inertial stability, supporting clean cuts across the specified bore 180–240 mm range. Fast insert changes and straightforward maintenance Compatibility with CCMT 09T3 indexable inserts keeps tooling costs predictable while offering proven cutting geometries for finishing tasks. The clamping system uses a Torx T15 key and M3.5x9 screw, facilitating secure and repeatable insert fastening with minimal downtime for changeover. Clear, standardised fastenings simplify routine servicing and enable quick restoration of cutting geometry after a tool change, improving overall machine utilisation. Suited to precision-focused workshops and production lines Produced by Teknik Makina, this boring bar targets job shops and production facilities where finish quality and reliable repeatability matter. Sourcing via Metav ties the tool into a broader offering of precision equipment and services, streamlining procurement and after-sales routing. For operations that place a premium on measured outcomes and predictable supply, the THB101TM integrates into process chains that prioritise accuracy and consistent delivery. For a technical quotation or a case-specific machining recommendation for the Teknik Makina THB101TM boring bar, contact Metav Werkzeuge in Emmerich — phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: THB101TM Manufacturer: Teknik Makina Suitable for: CCMT 09T3 indexable inserts Fine machining: 0.01 mm Shank diameter: 40 mm Bore range: 180–240 mm Total length: 163.7 mm Weight: 5.967 kg Torx key: T15 Torx screw: M3.5x9 Facts Shank Ø: 40 mm Fine-machining tolerance: 0.01 mm Length: 163.7 mm Bore diameter range: 180–240 mm Weight: 5.967 kg Special features Designed for finishing operations Compatibility with CCMT 09T3 indexable inserts Torx T15 / M3.5x9 fastening system Robust construction for stable cuts FAQ Which indexable inserts fit this boring bar? The THB101TM boring bar is designed specifically for CCMT 09T3 indexable inserts, providing correct seating and clamping geometry for reliable finishing. What bore diameters can be machined with the tool? The tool is intended for internal turning in a bore range of 180–240 mm, offering a dedicated solution for that diameter window. What clamping and fastening does the bar use? Clamping for the insert employs a Torx T15 key together with an M3.5x9 screw to ensure secure, repeatable fastening of the CCMT insert. What precision can be expected from the finishing passes? The THB101TM is rated for fine machining to 0.01 mm, supporting tight dimensional control suitable for precision components. What are the key dimensions to consider for setup? Important setup values include a shank diameter of 40 mm, total length 163.7 mm, and a weight of 5.967 kg, which inform holder selection and overhang planning. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
180mm Boring Tool for Fine Machining for CCMT 09T3 Indexable Inserts, 40mm Shank Diameter - Teknik Makina
Benefit from improved process reliability through a 40 mm shank that enhances stability and a 240 mm max cutting diameter that extends capability; combined with compatibility for CCMT 09T3 indexable inserts, this results in consistent bore quality and efficient insert changes — order the fine-finishing boring tool directly via Metav Werkzeuge or consult our advisers for application guidance. Fine-finishing boring tool THB111TM – 180 mm, for CCMT 09T3 The fine-finishing boring tool THB111TM is designed for precise internal machining, combining robust shank dimensions with compatibility for CCMT 09T3 indexable inserts to deliver repeatable finishing performance. For CCMT 09T3 indexable inserts Max cutting diameter 240 mm Shank diameter 40 mm for rigidity Cutting height 93.7 mm for deep reach Consistent bore finish with reduced rework The THB111TM is engineered to support high-quality internal finishing by focusing on dimensional repeatability and surface integrity. The combination of a substantial shank diameter (40 mm) and a tool geometry suited to fine finishing minimises vibration during cuts, which reduces chatter and the need for secondary polishing. When paired with CCMT 09T3 indexable inserts, the set-up allows fast index changes while maintaining cutting edge geometry, so cycle times remain predictable and scrap rates fall. This contributes directly to improved production throughput and lower per-part processing costs. Stable machining and straightforward setup for reliable production A key practical advantage is the tool’s capacity to provide stability through its design: the robust connection to the machine and the specified cutting height of 93.7 mm enable deep internal access without compromising stiffness. This stability translates into fewer tool offsets and a reduced requirement for frequent re-calibration. The use of standard CCMT 09T3 inserts simplifies procurement and inventory control, as these inserts are widely available and cost-effective to replace. Technicians with limited experience of fine boring will find the straightforward insert clamping and predictable cutting behaviour helpful when establishing repeatable machining programmes. Practical benefits for workshop efficiency and process control By integrating a boring solution that supports a 240 mm maximum cutting diameter, workshops can avoid multiple tool changes for larger bores, reducing non-cutting time during set-ups. The modular nature of the system — a finishing bar optimised for indexable inserts — enables targeted maintenance: worn edges are replaced, not entire tools. This lowers tooling expenditure and shortens downtime. In addition, the compatibility with established insert geometries ensures a wide choice of grades and coatings can be employed to match workpiece materials and cutting conditions, improving both surface quality and tool life. For precision internal turning tasks, request tailored application advice or arrange procurement through Metav Werkzeuge — discuss the Teknik Makina THB111TM and its suitability for specific production requirements with our specialists. Technical data Article number: THB111TM Eclass: 21041590 Brand: Teknik Makina Label: 180mm Ausdrehwerkzeug für die Feinbearbeitung CCMT 09T3 Facts Diameter: 180 mm Shank diameter: 40 mm Max cutting diameter: 240 mm Cutting height: 93.7 mm Special features For CCMT 09T3 indexable inserts Fine-finishing application Designed for internal boring operations SKU: THB111TM FAQ Which insert type is recommended for this boring tool? The boring tool is designed specifically for CCMT 09T3 indexable inserts; the THB111TM accepts that insert geometry for fine finishing. What is the maximum cutting diameter achievable? Maximum cutting diameter is 240 mm, allowing larger bores to be machined without additional tool changes. How does the shank diameter affect machining performance? The 40 mm shank diameter provides increased rigidity, which improves stability and reduces vibration during precision finishing operations. Is the tool intended for deep internal finishing tasks? Yes, the 93.7 mm cutting height is intended to provide reach for deep internal bores while maintaining the stiffness required for fine finishing. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
19-23mm Boring Tool For WCMX And CCMT Indexable Inserts M10 Thread 70mm Overall Length - Teknik Makina
Reliable machining performance is ensured by compatibility with WCMX and CCMT 0602 indexable inserts and a precise Ø 19–23 mm working range; the M10 thread and compact 70 mm overall length support secure mounting in confined setups. Order directly via Metav Werkzeuge or request specialist advice from the technical team. TKB172TM Boring tool for WCMX and CCMT indexable inserts — Ø 19–23 mm, M10 thread (Teknik Makina) The TKB172TM is a compact boring tool designed for precision turning operations using WCMX and CCMT indexable inserts, intended for use where confined space and reliable insert clamping are required. Compatible with WCMX and CCMT inserts Diameter range 19–23 mm M10 thread for secure mounting Compact overall length 70 mm Stable chip control through standardised insert compatibility The compact boring bar offers consistent chip formation by accepting established indexable inserts, notably CCMT 0602, which are widely available and easy to replace. Because the tool uses standardised insert geometries, set-up times are reduced and tool inventory is simplified; this leads to lower tooling costs and faster job changeovers. The use of indexable cutting edges also means that only the insert needs replacing when wear occurs, preserving the integrity of the holder and ensuring repeatable cutting conditions for each operation. Secure mounting and access for tight workspaces With an M10 thread and a total length of 70 mm, the design focuses on secure attachment and minimised overhang. The limited overall length reduces leverage and deflection, providing greater rigidity and improved surface finish in bore and facing operations. A nominal diameter range of Ø 19–23 mm enables compatibility with a variety of machine tool interfaces and seatings, making the tool suitable for compact tool posts and turret installations where space is at a premium. Practical handling, quick replacement and workshop efficiency Weighing approximately 0.095 kg, the tool is easy to handle and quick to index during insert changes. The straightforward geometry supports standard workshop maintenance routines and limits downtime. For machinists less familiar with indexable systems: an indexable insert is a replaceable cutting tip that is clamped into the holder; once one edge is worn, the insert is rotated or replaced without removing the holder from the machine, which simplifies maintenance and keeps components aligned for accurate repeatability. For confident, compact boring operations choose Teknik Makina's TKB172TM and contact Metav Werkzeuge for specification support or to place an order — eMail info@metav-werkzeuge.com · Tel +49 2822 7131930 Technical data Article number: TKB172TM Name: Ausbohrwerkzeug for WCMX and CCMT Indexable Inserts Manufacturer: Teknik Makina Facts Diameter: 19–23 mm Thread: M10 Overall length: 70 mm Weight: 0.095 kg Special features Compatible insert size: CCMT 0602 Designed for WCMX and CCMT indexable inserts Compact design for confined setups FAQ What type of tool is the TKB172TM and what is it used for? The TKB172TM is a boring tool (boring bar) from Teknik Makina, designed for turning and boring operations that use indexable inserts such as WCMX and CCMT. Which insert size is compatible with this boring tool? Compatibility is specified for CCMT 0602 inserts; the holder also supports WCMX-style indexable inserts as indicated in the product description. What are the key dimensions to consider for installation? Key dimensions are a working diameter range of 19–23 mm, an M10 mounting thread and an overall length of 70 mm; the listed SKU is TKB172TM. Is the design suitable for operations in tight spaces? Yes, the compact overall length of 70 mm and a nominal diameter range of 19–23 mm make the tool appropriate for confined tool posts and tight turret clearances. How does the M10 thread affect clamping stability? The M10 thread provides a standardised, secure connection that reduces movement and vibration at the toolholder interface, contributing to improved surface finish and dimensional accuracy. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
19-23mm Cartridge For Boring Tool CCMT 0602, Precision Fit - Teknik Makina
Take advantage of a secure insert seat and straightforward compatibility to keep turning operations efficient; the cartridge combines precision fit and workshop durability for steady results. Order the part directly via Metav Werkzeuge or consult the technical team for application advice. Cartridge for Boring Tool 19-23 CCMT 0602 – precision insert seat by Teknik Makina Cartridge for Boring Tool 19-23 CCMT 0602 is a precision cartridge designed to accept indexable CCMT 0602 inserts and to mate with boring bars in the 19–23 mm range for reliable turning and finishing tasks. Precision insert seat for CCMT 0602 Fits 19–23 mm boring bar range Durable construction for workshop use OEM compatibility with Teknik Makina Secure seating for consistent cutting performance The cartridge provides a precision insert seat that stabilises the CCMT 0602 insert during cutting, reducing micro‑movement and improving dimensional repeatability. A securely seated insert lowers the risk of chatter and irregular wear, which contributes to consistent surface finish and predictable tool life. This stable mechanical interface is particularly valuable in series production where process reliability is a priority. Faster changeover through standardised fit Designed to match the 19–23 mm boring bar envelope, the cartridge simplifies tool exchanges and shortens set‑up time. The clear compatibility with indexable CCMT geometry enables quick replacement of worn seats or inserts without complex adjustment. Reduced downtime and faster machine restarts lead to more productive machining cycles and a leaner workflow in the workshop environment. Built for regular workshop use Manufactured to industry expectations, the cartridge offers durable workshop fitment that withstands routine handling and installation. As a component from Teknik Makina, it integrates with standard boring tool assemblies and supports everyday turning and finishing operations. Combined with a disciplined maintenance routine, the cartridge helps maintain cutting performance across multiple insert changes. Practical installation and inspection advice Installation requires correct seating of the insert and verification of clamping torque to ensure the cartridge functions as intended. Regular visual inspection for wear or deformation preserves tool integrity and machining quality. If application specifics or dimensional drawings are needed, Metav’s technical advisers provide further documentation and compatibility checks to support integration into existing setups. For availability, technical compatibility checks or bespoke advice on Teknik Makina cartridges, contact Metav Werkzeuge – phone +49 2822 7131930 or e‑mail info@metav-werkzeuge.com; consultations are available from our Emmerich centre. Technical data Article number: KR098TM Designation: Kartusche (Cartridge) for Boring Tool 19-23 CCMT 0602 Manufacturer: Teknik Makina Numbers / Core technical data Boring range: 19–23 mm Compatible insert: CCMT 0602 Special features Suitable for boring tool 19–23 CCMT 0602 OEM-compatible cartridge Robust workshop fit FAQ What insert type does this cartridge accept? The cartridge accepts CCMT 0602 indexable inserts and is configured for the insert geometry associated with that designation. Which boring bar sizes are compatible with this cartridge? Compatibility is specified for a 19–23 mm boring bar range; the cartridge is intended for installations within that envelope. Is this a genuine Teknik Makina part and how is quality ensured? This is a Teknik Makina cartridge (SKU KR098TM); parts are distributed via Metav Werkzeuge, which acts as the responsible distributor to ensure quality and traceability. How often should the cartridge be inspected in workshop use? Inspection frequency depends on cycle time and cutting conditions; regular checks after insert changes are recommended to confirm seat integrity and clamping condition. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
190mm Boring Bar for Fine Machining for CCMT 09T3 Indexable Inserts, L220mm - Teknik Makina
Benefit from the combination of high rigidity, broad insert compatibility and extended cutting reach to improve finish quality and reduce tool changes; order the tool directly via Metav Werkzeuge or consult our specialists for application advice. Boring tool for fine finishing – 190 mm diameter, for CCMT 09T3 (Teknik Makina) Boring tool for fine finishing designed for internal turning and fine internal profiling with standard CCMT 09T3 indexable inserts, suited to precision workshops and CNC turning centres. 190 mm nominal diameter Compatible with CCMT 09T3 inserts Overall length L220 mm Max cutting diameter 250 mm Stable rigidity for superior surface finish The design delivers stable rigidity across the machining span, which reduces chatter and improves surface quality on delicate internal profiles. With a 190 mm nominal diameter and a robust shank geometry, the tool maintains cutting conditions even when working close to the maximum cutting reach. This stability translates into fewer rejected parts and lower rework times, supporting a more predictable production flow for finishing operations. Efficient compatibility reduces tooling complexity Acceptance of CCMT 09T3 indexable inserts means broad availability of grades and edge geometries, enabling quick adaptation to varied materials and cutting conditions. The option to fit industry-standard inserts keeps consumable management simple and cost-effective; spare parts sourcing is straightforward and changeover times are short, making the tool a pragmatic choice for mixed-batch production and maintenance of consistent process parameters. Extended reach and cutting height for deep features With an overall length L220 mm and a cutting height of 150 mm, the boring bar is configured for applications that demand deeper internal access without compromising rigidity. The combination of length and a max cutting diameter of 250 mm allows finishing of bore sections and internal contours in a single setup where possible, reducing handling and aligning with lean machining strategies. The result is measurable time saving on multi-stage operations. Workshop-ready design and handling benefits The tool’s geometry and interface have been conceived for easy mounting in standard toolholders and for secure clamping on CNC lathes. Reduced set-up complexity and clear insert indexing support faster commissioning of jobs. Where process documentation is required, the tool’s compatibility with common industry inserts and the clear dimensional references simplify standard operating procedures and training for operators. For precise application guidance or to request a specification sheet for the Teknik Makina THB131TM, contact Metav Werkzeuge for tailored advice and procurement support. Technical Data Article number: THB131TM SKU: THB131TM ECLASS: 21041590 Label: 190mm Ausdrehwerkzeug für die Feinbearbeitung CCMT 09T3 L220mm Data Nominal diameter: 190 mm Overall length: 220 mm Max cutting diameter: 250 mm Cutting height: 150 mm Special features Product type: Boring tool for fine finishing Compatible with: CCMT 09T3 indexable inserts Manufacturer: Teknik Makina UID: THB131TM FAQ What inserts are compatible with this boring tool? The boring tool accepts CCMT 09T3 indexable inserts; THB131TM is designed to fit the standard pocket and clamp for that insert geometry. Can this tool reach deep internal bores? Yes, with an overall length of L220 mm and a cutting height of 150 mm, the tool is intended for deeper internal finishing tasks while maintaining stability. Is the THB131TM suitable for CNC lathes? The design of the THB131TM supports mounting in common toolholders used on CNC turning centres and is optimised for machine-based finishing operations. How does use of CCMT 09T3 inserts benefit tool management? CCMT 09T3 inserts are widely available in multiple grades and chipformers, which simplifies stockkeeping and enables rapid adaptation to different workpiece materials. Where can further technical documentation be obtained? Detailed specification sheets and cutting data can be requested via Metav Werkzeuge; reference the Teknik Makina THB131TM when enquiring. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
200mm Boring Tool CCMT 0602 Insert Holder 23mm Cut Diameter 16mm Shank - Teknik Makina
Combining a rigid 16 mm shaft, a long 152 mm cutting length and compatibility with CCMT 0602 indexable inserts, this boring bar delivers stable internal machining and efficient insert changes; order the TKB098TM directly via Metav Werkzeuge or consult our specialists for application advice. TKB098TM Boring Bar – indexable internal boring tool with 16 mm shaft and 152 mm cutting length (Teknik Makina) The TKB098TM Boring Bar offers a compact, precision-focused solution for internal turning operations, designed as an indexable tool holder compatible with CCMT 0602 inserts for straightforward insert replacement and repeatable results 16 mm shaft for secure clamping 152 mm effective cutting length for deep bores Compatible with CCMT 0602 indexable inserts 200 mm overall length for extended reach Delivering consistent bore accuracy and vibration control The combination of a 16 mm shaft and an extended 152 mm cutting length provides a balance between reach and rigidity that helps maintain concentricity during internal machining. Where stability is essential, the toolholder’s design reduces chatter and supports repeatable diameters across batch runs. Specified tolerances are achieved more reliably when the holder is clamped correctly in a standard toolpost or boring bar adaptor, making the unit suitable for precision-focused turning tasks. The use of indexable inserts reduces setup variability compared with brazed or solid tooling, translating directly into predictable part quality. Faster insert changes and predictable uptime for production Designed for CCMT 0602 indexable inserts, the boring bar reduces maintenance downtime through quick insert indexing and simple replacement without specialised fixtures. The low mass of 0.401 kg contributes to easier handling during tool changes and reduces spindle overhang effects when re‑mounting, while the insert system supports both finishing and light roughing passes depending on the chosen grade. This pragmatic approach to tooling lowers process interruptions and helps sustain machine uptime during medium-length production cycles. Integrates into CNC turning workflows with extended reach With a 200 mm overall length, the tool provides the reach required for many internal machining applications while remaining compatible with common CNC turret and toolpost arrangements. As an indexable boring bar, it fits established workshop processes, allowing straightforward inventory management by pairing the holder with widely available CCMT plates. The design supports operators and planners aiming to harmonise tooling across multiple machines, enabling a consistent approach to tooling procurement and faster tool set-up times on the shop floor. The robust construction supports steady cutting conditions and consistent part outcomes. Discuss machining requirements and procure the Teknik Makina TKB098TM via Metav Werkzeuge for reliable supply from Emmerich; for specification checks or a tailored quote contact info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: TKB098TM Manufacturer: Teknik Makina Description: Boring tool / indexable boring bar Compatible inserts: CCMT 0602 Numbers / Core technical data Shaft diameter: 16 mm Cutting length (cutting part): 152 mm Overall length: 200 mm Weight: 0.401 kg ECLASS: 21181208 Special features For indexable inserts CCMT 0602 Intended for internal boring operations Solid construction for stable machining Compact design for straightforward handling FAQ What insert type does the tool accept? The TKB098TM accepts CCMT 0602 indexable inserts; this standard format allows easy sourcing and fast replacement during production. Which machines is the boring bar suited to? The indexable boring bar is suitable for conventional and CNC turning centres equipped with compatible toolholders; the 200 mm overall length offers extended reach for internal operations. How does the shaft diameter affect performance? The 16 mm shaft provides secure clamping and contributes to reduced vibration, supporting consistent bore accuracy when mounted correctly. Is the tool intended for heavy roughing or finishing? Paired with the appropriate CCMT insert grade, the holder supports finishing and light to moderate roughing; insert selection should match the intended cut and workpiece parameters. How heavy is the tool for handling and set-up? The tool weight is 0.401 kg, which facilitates handling during set-up and reduces tool overhang impact when mounted. Manufacturer/Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
22-32mm Cartridge for Boring Tool CCMT 09T3, T15/M3.5x8.5 Torx - Teknik Makina
Take advantage of precise clamping, broad adjustability and simple insert replacement to streamline internal turning operations; order supply via Metav Werkzeuge or consult our technical team for tailored recommendations. Cartridge THB05TM — 22–32 mm for boring tool set (Teknik Makina) A Cartridge THB05TM designed for secure clamping in adjustable boring heads, intended for internal turning and finishing tasks in metalworking environments Adjustable 22–32 mm clamping range Accepts CCMT 09T3 indexable inserts Torx T15 key and M3.5×8.5 screw spec Robust cartridge for boring tool sets Consistent clamping for accurate bore results The cartridge is engineered to deliver repeatable concentricity across the 22–32 mm range, which reduces rework and improves process stability. Its compatibility with CCMT 09T3 indexable inserts ensures a familiar cutting geometry for many turning operations, while the adjustable clamping range permits one holder to replace several fixed shanks. For workshops seeking predictable cycle times and reduced set-up variance, this holder provides a solid technical basis for improved part quality. Maintenance and insert change made efficient Fast insert exchange is supported by a standard Torx T15 drive and an M3.5×8.5 retaining screw, allowing controlled removal and replacement of cutting tips without special tooling. The straightforward fastening arrangement helps shorten tool-change intervals and simplifies inventory of spare parts. Where downtime minimisation and clear maintenance procedures are priorities, the cartridge’s familiar hardware and indexed insert fit support reliable, low-complexity servicing. Clear technical benefits for process planning Using a single cartridge that covers 22–32 mm reduces the number of holders required and streamlines tooling lists, which benefits procurement and setup logistics. The acceptance of widely used CCMT 09T3 inserts means cutting data and edge preparations remain standardised across machines. For planners and operators, this translates into fewer tool variants, simpler tool presetting routines and more consistent finish quality on internal bores. Practical applications and workshop integration The unit is intended for integration into boring tool sets for internal turning, fine finishing and diameter adjustment tasks in conventional and CNC lathes. Its design supports flexible adaptation to differing bore sizes without the need for multiple dedicated holders, thereby saving bench space and lowering tooling complexity. In mixed-production environments where changeovers are frequent, the cartridge contributes to a leaner tooling system and helps maintain machining throughput. Contact Metav Werkzeuge for tailored supply and technical advice on the Teknik Makina cartridge THB05TM; call +49 2822 7131930 or email info@metav-werkzeuge.com for reliable delivery from Emmerich. Technical data Article number: THB05TM Manufacturer: Teknik Makina Description: Cartridge 22–32mm for boring tool set Facts Clamping range: 22–32 mm Torx key size: T15 Screw: M3.5×8.5 eCl@ss: 21041590 Special features For CCMT 09T3 indexable inserts Intended for boring tool sets SKU: THB05TM FAQ Which indexable inserts fit this cartridge? The cartridge THB05TM accepts CCMT 09T3 indexable inserts and is configured for the common CCMT insert geometry used in internal turning. What clamping range does the holder cover? The clamping range is 22–32 mm, enabling a single holder to accommodate a variety of internal diameters within that span. How is the insert secured and changed? Insert retention is via an M3.5×8.5 screw tightened with a Torx T15 driver; the cartridge THB05TM permits controlled replacement following standard workshop procedures. For which operations is this cartridge suitable? Designed for integration into boring tool sets, the cartridge is suitable for internal turning and finishing tasks where adaptable diameter control and repeatable clamping are required. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
23-28mm Boring Tool For WCMX And CCMT Indexable Inserts, M12 Thread, 72mm Overall Length - Teknik Makina
Take advantage of a compact, purpose-built boring tool that accepts widely available CCMT 0602 indexable inserts and covers a practical bore range of Ø 23–28 mm; order the tooling directly via Metav Werkzeuge or consult the specialists for application advice. Boring tool TKB174TM – Internal boring tool for WCMX and CCMT indexable inserts, Ø 23–28 mm, M12 thread (Teknik Makina) A Boring tool TKB174TM designed for internal turning and finishing where a short overhang and reliable insert clamping are required, compatible with CCMT 0602 indexable inserts for flexible workshop stocking Ø 23–28 mm cutting diameter range M12 mounting thread Compatible with CCMT 0602 inserts 72 mm total length Precise compatibility that reduces tooling variety and downtime The tool is built around a standard insert format, accepting CCMT 0602 indexable inserts and WCMX-style options, which gives an immediate logistical benefit: commonly stocked inserts can be used across multiple holders, reducing inventory complexity. The compatibility with established insert geometries ensures repeatable edge positioning and predictable wear patterns, which simplifies process planning and lowers effective tooling cost over time. Using a standard insert also enables rapid replacement and minimal spindle idle time, supporting continuous shop-floor throughput. Compact design for improved rigidity and concentricity A short overall length of 72 mm combined with an M12 mounting thread reduces cantilever and improves stability during internal operations. The reduced overhang lowers vibration potential and supports closer tolerances in bored features, which is particularly useful in confined bores where tool deflection would otherwise degrade finish and roundness. At a mass of 0.145 kg, the holder is easy to handle and quick to change while imposing minimal additional load on turrets or adaptors, helping to maintain cycle consistency in production runs. Practical integration, serviceability and workshop benefits The holder’s Ø 23–28 mm application window covers a useful span of small- to mid-diameter bores, making it suitable as a standardiser for multiple jobs. The TKB174TM accepts readily available inserts, so maintenance routines become straightforward and spare parts procurement is simplified. The M12 thread offers secure seating and straightforward replacement; the result is predictable clamping repeatability and reduced set-up time. For operations seeking to balance flexibility, tool life and straightforward maintenance, this holder provides a pragmatic solution without unnecessary complexity. Discuss machining requirements with Metav Werkzeuge’s tooling specialists in Emmerich for tailored recommendations on the TKB174TM; email info@metav-werkzeuge.com or call +49 2822 7131930 to align tool selection with specific applications. Technical data Article number: TKB174TM Manufacturer SKU: TKB174TM Measurements & weights Cutting diameter range: 23–28 mm Total length: 72 mm Thread: M12 Weight: 0.145 kg Compatibility & features Compatible with CCMT 0602 indexable inserts For use with WCMX and CCMT indexable inserts Application: internal boring / finishing FAQ What insert types fit this boring holder? The holder is compatible with CCMT 0602 inserts and WCMX-style indexable inserts, allowing use of standard ground geometries for finishing and light roughing. What bore sizes are covered by this tool? This boring tool accommodates bores in the Ø 23–28 mm range and is intended for internal turning tasks within that span. How is the tool mounted to the turret or adaptor? Mounting is achieved via an M12 thread, offering secure clamping and straightforward replacement during tool changes. Is the TKB174TM suitable for heavy-depth cuts? The TKB174TM is optimised for compact installations where rigidity is required; specific cutting depths depend on machine setup, insert grade and workpiece material. How heavy is the holder and how does that affect handling? The holder weighs 0.145 kg, which supports easy handling and minimal additional load on turrets or adaptors during index changes. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
235mm Boring Bar CCMT 0602 Insert Holder 28mm Cutting Diameter, 20mm Shank - Teknik Makina
Benefit from a sturdy 20 mm shank, a long 185 mm cutting length and compatibility with CCMT 0602 indexable inserts for reliable internal machining and reduced cycle times. Order the internal boring bar directly via Metav Werkzeuge or ask the consultants if needed. Internal boring bar TKB104TM — 20 mm shank, CCMT 0602 compatible (Teknik Makina) The internal boring bar TKB104TM is designed for controlled internal turning with indexable CCMT 0602 inserts, delivering stable bore finishing and straightforward insert changes for small to medium production runs 20 mm shank for stable clamping Compatible with CCMT 0602 inserts 185 mm cutting length for deep bores Total length 235 mm Engineered rigidity for repeatable bore results A robust 20 mm shank is provided to maintain concentricity and minimise vibration during internal turning, so runout is reduced and surface quality is improved. The tool body is balanced for stable rotation and the moderate weight (0.682 kg) supports safe handling while remaining rigid in the tool post. These design choices translate into fewer scrapped parts and more consistent first-pass quality on turned bores. Fast indexability and controlled chip flow Compatibility with CCMT 0602 indexable inserts enables rapid, cost-efficient insert replacement and flexible grade selection for different workpiece materials. The long 185 mm cutting length gives access to medium-depth bores without frequent tool changes. Insert geometry fosters predictable chip formation, which minimises interruptions and helps maintain steady cycle times on CNC lathes and manual turning centres. Precision where it matters — process stability The geometry and shank specification are chosen to support accurate bore diameters and repeatable finishes. The tool is suited for finishing and light-medium stock removal where dimensional stability is required. Where operators demand reproducible outcomes, the boring bar’s construction reduces the need for corrective passes, improving productivity and lowering overall machining costs. Simple integration and low-maintenance operation The boring bar is compatible with standard tool holders and is supplied for use with industry-standard CCMT 0602 inserts, simplifying inventory and maintenance routines. Routine upkeep is limited to insert changes and basic clamping checks; no specialised service tools are necessary. The tool’s total length of 235 mm allows straightforward setup in common lathe configurations, making it a practical choice for mixed-shop environments and contract workshops. Contact Metav Werkzeuge to discuss how the Teknik Cutting Tools TKB104TM boring bar with a 20 mm shank and 185 mm cutting length can streamline internal turning processes — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: TKB104TM Manufacturer: Teknik Makina eClass: 21181208 Files: 62de7eef0f56dbb4de4dbf60, 62de7e6333927e49dbf32755 Facts Shank diameter: 20 mm Cutting length: 185 mm Total length: 235 mm Weight: 0.682 kg Special features For indexable inserts CCMT 0602 SKU: TKB104TM Suitable for internal turning applications FAQ What insert type does this boring bar take? The boring bar is compatible with CCMT 0602 indexable inserts; these inserts can be selected in grades appropriate for steel, alloyed materials or finishing tasks. Is the tool suitable for deep bore machining? With a cutting length of 185 mm and a total length of 235 mm, the bar is designed for medium-depth internal machining and provides good access within common lathe envelopes. How is concentricity and vibration control achieved? Concentricity and vibration damping are achieved through the 20 mm shank and the bar’s balanced construction, which together improve surface finish and repeatability. Can the boring bar be mounted in standard tool holders? Yes, the bar is intended for use with standard turning tool holders compatible with a 20 mm shank and indexable insert systems, facilitating easy integration. What routine maintenance is required? Routine maintenance is limited to periodic insert replacement and verification of clamping torque; no specialised maintenance is required for normal workshop use. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
23mm Boring Tool CCMT 0602 Indexable Inserts, 16mm Shank 52mm Cutting Length - Teknik Makina
Take advantage of a compact, indexable solution that balances rigidity and insert compatibility for efficient internal machining. The combination of a shank Ø16 mm with a 52 mm effective cutting length supports stable boring cycles and predictable repeatability — order supply via Metav Werkzeuge or request an individual tooling recommendation from our consultants. TKB094TM Boring Bar – indexable boring tool, Ø19 mm nominal, CCMT 0602 compatible A TKB094TM boring bar designed for internal turning and reboring operations in CNC setups, optimised for use with CCMT 0602 indexable inserts and compact tool layouts Indexable CCMT 0602 compatibility Nominal diameter Ø19 mm Shank diameter Ø16 mm for rigid clamping 52 mm cutting length for deeper bores Engineered rigidity for repeatable internal machining The design focuses on delivering consistent, measurable results through rigid clamping and balanced geometry. With a shank Ø16 mm, the bar reduces vibration and tool deflection compared with slimmer alternatives, which improves bore roundness and surface finish. The nominal Ø19 mm profile and a modest mass of 0.192 kg help to maintain tool stability during interrupted cuts, making this tool suitable for short- to medium-length internal machining tasks where repeatability and control are priorities. Insert system that simplifies tooling logistics Compatibility with CCMT 0602 indexable inserts streamlines procurement and reduces inventory complexity. Indexable inserts allow economical edge changes: worn cutting edges are replaced rather than the entire tool, lowering operating costs and shortening downtime. For less experienced staff, an indexable system also simplifies set-up because insert seating and clamping angles are standardised; the result is quicker insert replacement and consistent cutting geometry across multiple tool holders. Integration into CNC workflows and measurable productivity gains The bar’s 52 mm cutting length and 100 mm overall length are balanced for accessible reach in most turning centres while keeping overhang minimal. The maximum cutting diameter 23 mm provides a clear performance envelope for process planning. Reduced set-up time and fewer full-tool replacements translate into higher effective machine availability and a predictable cycle time — a rational benefit for production planning and cost accounting in small-batch and serial manufacturing environments. Contact Metav Werkzeuge for a tailored technical recommendation and supply of the Teknik Cutting Tools TKB094TM boring bar, directly from our Emmerich hub. Technical data Article number: TKB094TM Manufacturer: Teknik Makina Name: Boring bar Accepts: CCMT 0602 inserts Weight: 0.192 kg Facts Nominal diameter: 19 mm Maximum cutting diameter: 23 mm Shank diameter: 16 mm Cutting length: 52 mm Overall length: 100 mm Special features For indexable CCMT 0602 inserts Shank Ø16 mm for rigid clamping Nominal Ø19 mm profile 52 mm effective cutting length Compact 100 mm overall length FAQ What insert type does this boring bar accept? The TKB094TM boring bar is specified for CCMT 0602 indexable inserts, providing standardised seating and cutting geometry for quick insert changes. What are the key dimensional limits for planning a process? Key values for planning with this boring bar are a nominal diameter of 19 mm, maximum cutting diameter 23 mm, cutting length 52 mm and overall length 100 mm. Which shank diameter is required for secure clamping? Secure clamping requires a holder or arbor compatible with the shank Ø16 mm dimension to ensure the required rigidity. How does the TKB094TM support shop-floor efficiency? By using indexable inserts and a compact geometry, the TKB094TM reduces downtime for tool changes and helps keep overhang low, contributing to steadier cycle times and less rework. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
23mm Boring Tool For CCMT 0602 Inserts 50mm Cutting Length, 20mm Shank - Teknik Makina
Benefit from the combination of precise insert compatibility, a stable 20 mm shank and a 50 mm effective cutting length to secure repeatable internal bores; order directly via Metav Werkzeuge or consult our specialists for application advice. Boring Tool TKB100TM (Teknik Makina) — 20 mm shank, for CCMT 0602 inserts Boring Tool TKB100TM is a precision internal boring holder designed for CNC lathes and milling machines, optimised for CCMT 0602 indexable inserts and medium-reach operations. CCMT 0602 insert compatibility 20 mm solid shank for stable clamping 50 mm effective cutting length Max cutting diameter 28 mm Accurate insert compatibility for consistent bore quality The holder is engineered for CCMT 0602 indexable inserts, which makes tool changes fast and repeatable. With a 50 mm effective cutting length and a maximum cutting diameter of 28 mm, the system is suitable for mid-range internal machining tasks where dimensional consistency is essential. Indexable inserts reduce downtime for tool regrinds and provide a measurable cost advantage in batch production, while established insert grades preserve edge life under varying cutting conditions. Stable shank and reach that reduce vibration A 20 mm shank provides a secure clamp interface that helps to maintain concentricity and reduce runout during cutting. The combination of a compact 100 mm overall length and a low mass of 0.298 kg limits overhang-induced deflection, which in turn improves surface finish and dimensional accuracy. These mechanical characteristics are particularly important when tight tolerances are required; the holder’s geometry is thereby designed to support efficient chip evacuation and minimise chatter during machining. Practical advantages for workshop and production environments The modular approach with indexable inserts simplifies inventory management and lowers per-part tooling costs in small-batch and series production. The tool’s compact design supports flexibility on conventional and CNC machines, enabling quick set-up and predictable cycle times. Metav’s position as a quality filter for Europe ensures reliable supply and technical guidance, offering purchasers the confidence that precision components are backed by experienced consultancy and a comprehensive product range. Contact Metav Werkzeuge today to discuss the Teknik Makina TKB100TM and secure a precision boring solution tailored to the application, delivered from our Emmerich stock and supported by our technical consultants. Technical Data Article number: TKB100TM Manufacturer: Teknik Makina Product: Boring tool Cutting diameter max: 28 mm Shank diameter: 20 mm Effective cutting length: 50 mm Overall length: 100 mm Weight: 0.298 kg Compatible insert type: CCMT 0602 Indexable insert holder design Compact, low-mass construction FAQ Which insert type fits this tool? The tool accepts CCMT 0602 indexable inserts; Teknika Makina’s TKB100TM is configured for this common insert geometry to simplify sourcing and changeover. What machines is the holder suited for? The holder is suitable for CNC lathes and milling machines where a 20 mm shank and a 100 mm overall length meet the required toolholder interface and reach. How does the shank diameter affect performance? A 20 mm shank improves clamping stability and reduces runout, which helps to maintain bore accuracy and surface finish during operations with the TKB100TM. Is this tool a good choice for small-batch production? Yes; the use of indexable inserts and the tool’s compact geometry make the TKB100TM a cost-effective solution for small-batch and repeatable production tasks. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
240-300mm Boring Tool For Finish Machining, For CCMT 09T3 Inserts, 0.01mm Resolution - Teknik Makina
Take advantage of the combination of high-precision finishing and a robust Ø 240–300 mm working range for consistent bore quality. The tool’s 40 mm holder and 0.01 mm fine-machining capability deliver repeatable results in production; order directly via Metav Werkzeuge or consult our specialists for application guidance. Ausdrehwerkzeug THB102TM — Internal boring tool for finishing with CCMT 09T3 inserts, Ø 240–300 mm Ausdrehwerkzeug THB102TM is an internal boring tool designed for accurate finishing operations with CCMT 09T3 indexable inserts in medium-to-large bore applications. Finishing accuracy 0.01 mm Compatible with CCMT 09T3 inserts Ø 240–300 mm working range Holder diameter 40 mm Precise finishing that stabilises process capability This boring tool is engineered for consistent surface quality in finishing passes. With a fine-machining tolerance of 0.01 mm, the design reduces rework and minimises downstream inspection effort. The tool geometry and clamping arrangement support stable chip control when fitted with CCMT 09T3 indexable inserts, which helps to maintain repeatable roundness and surface finish across batches. For production environments, this translates into shorter cycle variation and improved first-pass yield. Robust construction for secure set-up and vibration damping A 40 mm toolholder diameter provides a rigid connection to the machine spindle, lowering the risk of chatter in larger bores. The tool’s mass (approximately 7 kg) and overall length of 163.7 mm combine to give a balanced assembly for stable cutting dynamics. The sturdy build supports predictable tool life for the inserts and reduces the need for frequent re-adjustments, which is especially valuable when processing longer runs or when high reproducibility is required. Simple assembly and reproducible clamping Fitting and securing the cutting insert is straightforward: the clamping screw is specified as M3.5x9 and the required Torx key size is T15, ensuring a consistent torque setting during assembly. Clear mechanical specifications make tool changes faster and reduce the chance of incorrect mounting. The design focuses on practical workshop handling so that set-up times are minimised while maintaining secure insert retention, helping to keep machining throughput high. Applications and material considerations for finishing operations This tool is primarily intended for finishing internal bores within the Ø 240–300 mm range using CCMT 09T3 inserts. It is suited to standard turning centres and boring mills where fine surface tolerance and concentricity are important. Typical uses include final sizing of castings, turned components and rework tasks that demand a controlled surface texture. When paired with appropriate inserts and cutting parameters, the assembly supports a wide range of finishing operations without compromising form accuracy. For precision finishing tasks with the THB102TM from Teknik Makina, contact Metav Werkzeuge for tailored application advice and procurement assistance. Technical data Article number: THB102TM Manufacturer: Teknik Makina Facts Working diameter: Ø 240–300 mm Overall length: 163.7 mm Holder diameter: 40 mm Fine machining tolerance: 0.01 mm Weight: 7 kg Special features Compatible with CCMT 09T3 indexable inserts Torx key: T15 Torx screw: M3.5x9 For finishing/internal boring applications FAQ What insert type is required for this boring tool? The boring tool is designed for CCMT 09T3 indexable inserts; these inserts provide the geometry and clearance necessary for the THB102TM to achieve its specified finishing performance. What is the achievable tolerance when finishing with this tool? When correctly set up, the tool achieves a fine-machining tolerance of 0.01 mm, assuming appropriate machine rigidity and cutting parameters. Which machines are suitable for mounting the boring tool? The THB102TM is compatible with lathes or boring mills that accept a 40 mm holder interface and can accommodate the tool’s overall length of 163.7 mm. How is the insert secured and what torque tool is required? Insert clamping uses an M3.5x9 screw tightened with a T15 Torx key to ensure consistent and secure retention. Is this tool intended for roughing operations? This tool is optimised for finishing; although it may be used for light stock removal, its principal strength lies in delivering precise surface quality and dimensional accuracy during finishing passes. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
240-350mm Boring Tool for CCMT 1204 Indexable Inserts, 154mm Overall Length, 40mm Shank - Teknik Makina
Take advantage of a high-stability boring solution that combines precise insert compatibility and a robust 40 mm shank to keep cycle times predictable and setups secure — order or request tailored advice via Metav Werkzeuge. TKB152TM Boring Tool — for CCMT 1204 indexable inserts, Ø 240–350 mm, 40 mm shank (Teknik Makina) A reliable TKB152TM boring tool engineered for heavy-duty machining where repeatable geometry and secure clamping are essential for medium-to-large diameter boring tasks. 40 mm shank diameter for stable clamping Compatible with CCMT 1204 indexable inserts Cutting diameter range 240–350 mm Sturdy 154 mm overall length, 8.294 kg mass Stable clamping for consistent bore quality The design focuses on repeatability: the 40 mm shank and robust body mass deliver reduced vibration and improved surface finish when boring in demanding applications. Stability directly affects tool life and part quality, so the heavier construction and firm shank connection help maintain concentricity over longer runs. For workshops seeking predictable tolerances, this reduces scrap rates and minimises rework, while the CCMT 1204 insert compatibility simplifies tooling logistics by using a widely available insert format. Fewer setups, clearer process control With a cutting diameter range of 240–350 mm and an overall length of 154 mm, the tool is intended to cover a broad set of machining conditions without frequent tool changes. The modular insert interface enables quick insert replacement using the supplied fasteners (Torx screw M5x12) and standard key (T20), which shortens downtime and helps maintain process efficiency. Explaining the reason: indexable inserts separate cutting geometry from the toolholder, so the holder remains unchanged while inserts are swapped to restore cutting performance — a cost-efficient strategy for production environments. Compatibility that streamlines workshop inventory Supporting CCMT 1204 indexable inserts means compatibility with many grades and coatings offered across suppliers, making it easier to choose coated or uncoated grades for specific materials. The tool’s specification is deliberately simple: a defined shank diameter, clear diameter range and standardised fixing method; this lowers procurement complexity and helps buyers consolidate items. That practical clarity benefits procurement managers and shopfloor planners aiming for fewer SKUs and better stock rotation. Practical assembly and maintenance advantages Assembly and clamping use common torque interfaces and a Torx head screw, which reduces the need for specialised tools. Routine maintenance is limited to insert changes and periodic inspection of the Torx fastener seating, so machine downtime is minimised. The combination of a substantial tool mass (8.294 kg) and standardised insert fixing enhances resistance to chatter when cutting tougher sections, translating into longer insert life and fewer interrupted cycles. Contact Metav Werkzeuge for tailored technical advice, availability checks and compatible insert recommendations for the Teknik Makina TKB152TM boring tool Technical Data Article number: TKB152TM Manufacturer: Teknik Makina Eclass: 21181208 For inserts: CCMT 1204 Shank diameter: 40 mm Overall length: 154 mm Diameter range: 240–350 mm Weight: 8.294 kg Torx key: T20 Torx screw: M5x12 Data Shank diameter: 40 mm Overall length: 154 mm Diameter range: 240–350 mm Weight: 8.294 kg Special features Compatible with CCMT 1204 indexable inserts Torx M5x12 fixing Torx key T20 required SKU: TKB152TM Eclass 21181208 FAQ What insert type does this tool accept? The tool accepts CCMT 1204 indexable inserts; Teknik Makina designed the TKB152TM specifically for that insert format to ensure correct seat geometry and secure fixing. What shank diameter is required for the toolholder? The boring tool uses a 40 mm shank diameter, which provides the clamping stability needed for bore diameters from 240–350 mm. How long is the tool overall and what does that mean for setup? Overall length is 154 mm, a compact but rigid length that simplifies fixturing and reduces overhang to help maintain concentricity during machining. Which fasteners and keys are needed for insert changes? Insert clamping uses an M5x12 Torx screw, tightened with a T20 Torx key; this standardised approach reduces the need for specialist tooling. Is the tool suitable for high-speed cutting? The tool is intended for stable, medium-to-heavy boring applications where insert selection determines cutting speed; choose insert grades and coatings suited to the material and desired surface finish. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
240mm Boring Bar For Fine Turning For CCMT 09T3 Indexable Inserts, 93.7mm Cut Height - Teknik Makina
Combine robust rigidity, large-diameter capability and established insert compatibility to achieve consistent finishing results; order the tool directly via Metav Werkzeuge or consult our specialists for application advice. Fine Boring Tool for CCMT 09T3 Indexable Inserts — 240 mm nominal diameter, 40 mm shank — Teknik Makina The Fine Boring Tool for CCMT 09T3 Indexable Inserts is a purpose-built finishing tool intended for precision boring and internal profiling with indexable carbide inserts. 240 mm nominal cutting diameter Compatible with CCMT 09T3 indexable inserts 40 mm shank diameter for rigid mounting 93.7 mm cutting height for extended reach Achieve consistent finishing with large-diameter stability The tool is designed for precision finishing operations where repeatable bore quality matters. With a 240 mm nominal cutting diameter and a geometry optimised for fine stock removal, the head delivers stable cutting conditions that reduce vibration and surface waviness. The 40 mm shank provides a secure interface with standard toolholders, improving run-out control; this results in a measurable improvement in roundness and surface finish compared with less rigid solutions. For machinists looking to maintain tight tolerances, the combination of diameter and shank rigidity translates directly into fewer rework cycles and higher first-pass yield. Secure clamping and extended reach for versatile machining The assembly’s 93.7 mm cutting height gives extended reach into deeper bores without compromising stiffness. Extended reach components can often introduce deflection; this tool mitigates that through a robust profile and correct centre of mass, helping to maintain cutting geometry under load. In practice, this means operators can perform finishing passes in one set-up where previously multiple tools were required. The result is reduced handling time, fewer tool changes and improved throughput on medium to large boreings. Indexable-carbide compatibility that reduces tooling costs Compatibility with CCMT 09T3 indexable inserts means the tool accepts a widely used, readily available carbide grade and geometry. Indexable inserts allow for rapid edge changes and the selection of grades optimised for steel, cast iron or non-ferrous materials. Because the insert pocket and seat conform to established standards, workshop inventory is simplified and tooling downtime is minimised. The pragmatic economics of indexable tooling—lower per-edge cost and straightforward regrinding policies for holders—support sustained production runs and predictable operating budgets. Practical applications and operational advantages Engineered for finishing operations in general engineering and toolroom environments, the boring head is suitable for internal machining tasks where surface integrity and dimensional consistency are priorities. Typical applications include bearing seats, precision housings and stepped bores. The design supports proven machining strategies such as light depth-of-cut finishing passes at controlled feeds to deliver the desired Ra values while preserving insert life. For procurement and process engineers, the combination of Teknik Makina build quality and straightforward insert replacement provides a reliable element in production tooling assortments. Discuss specific application requirements with Metav Werkzeuge for tailored machining recommendations or to request a detailed quotation for the Teknik Makina THB112TM — contact our Emmerich team at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data SKU: THB112TM Manufacturer: Teknik Makina Product: Fine boring tool for finishing Label: 240mm Ausdrehwerkzeug für die Feinbearbeitung CCMT 09T3 Core technical data Diameter: 240 mm Shank diameter: 40 mm Max cutting diameter: 300 mm Cutting height: 93.7 mm ECLASS: 21041590 Special features Compatible with CCMT 09T3 indexable inserts Designed for precision finishing SKU: THB112TM FAQ Which inserts fit this fine boring tool? The tool accepts CCMT 09T3 indexable inserts; Tek nika Makina’s THB112TM is furnished for this standard insert geometry. What bore range can be finished with this tool? The head is specified for a 240 mm nominal cutting diameter, with an indicated maximum cutting diameter of 300 mm, suitable for medium-to-large internal finishing. How does the 40 mm shank affect machining performance? A 40 mm shank provides a stiffer connection to the toolholder, reducing run‑out and deflection for improved surface finish and dimensional control when using the THB112TM. Is the tool suitable for deep bores? The 93.7 mm cutting height offers extended reach for deeper internal features; use conservative feeds and finishing passes to maintain insert life and bore quality. Can the tool be used for different materials? Compatibility with CCMT inserts allows selection of carbide grades tailored to steels, cast iron or non‑ferrous materials, enabling the head to be adapted to common finishing tasks. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
240mm Boring Tool for CCMT 1204 Indexable Inserts L208mm - Teknik Makina
Take advantage of the combination of large cutting capacity, simple insert compatibility and robust build for reliable bore production. Order the tool directly via Metav Werkzeuge or contact our consultants for specification matching. Boring tool for CCMT 1204 indexable inserts — 240 mm diameter, 208 mm overall length — Teknik Makina A robust boring tool for CCMT 1204 indexable inserts, designed for medium-to-large bore machining in conventional and CNC turning centres. Ø240 mm tool body for large bores Compatible with CCMT 1204 indexable inserts Overall length 208 mm for stable setup Consistent bore geometry and production repeatability The design provides a solid platform for producing uniform bores: a 240 mm tool body paired with a maximum cutting diameter of 350 mm ensures the machine load is distributed over a large contact area, improving rigidity and reducing vibration during machining. This results in better surface finish and dimensional repeatability across production runs. For operations where bore tolerance and surface integrity are critical, the combination of a wide tool body and controlled overhang reduces the need for repeated rework and supports stable cycle times. Fast insert handling and economic tool life Compatibility with CCMT 1204 indexable inserts simplifies service routines: inserts are widely available and can be indexed or replaced rapidly when wear occurs. The use of indexable inserts minimises downtime compared with solid-tool resharpening and permits cost-effective maintenance strategies for batch and continuous production. Clear insert seating and standard insert geometry mean replacement intervals are predictable, supporting inventory planning and minimising unplanned stoppages. Stable set-up and wide machine compatibility With an overall length of 208 mm, the tool is optimised to balance accessibility and stiffness for a variety of machines. The shorter overhang compared with longer heads improves dynamic behaviour in both manual lathes and CNC turning centres, aiding repeatable set-up and reducing the risk of chatter in deep or interrupted cuts. Manufactured by Teknik Makina, the component is intended for integration into standard tooling systems and is suitable where a sturdy, indexable cutter is required for internal or external bore work. Contact Metav Werkzeuge for a tailored technical consultation on the Teknik Makina boring tool TKB161TM and to confirm stock and delivery from our Emmerich warehouse — email info@metav-werkzeuge.com or call +49 2822 7131930. Technical data Article number: TKB161TM Product type: Boring tool Designation: Boring tool for CCMT 1204 indexable inserts Core dimensions Diameter: 240 mm Overall length: 208 mm Max cutting diameter: 350 mm eClass: 21181208 Compatibility & features Compatible with CCMT 1204 indexable inserts Label: 240mm Ausbohrwerkzeug CCMT 1204 L208mm Brand: Teknik Makina FAQ Which inserts fit this tool? The tool accepts CCMT 1204 indexable inserts; this standard geometry is compatible with the boring tool and allows straightforward indexing or replacement. What is the maximum cutting diameter that can be machined? The maximum cutting diameter is 350 mm when the boring tool is set up according to machine and process parameters. Is the tool suitable for CNC turning centres? Yes — the boring tool from Teknik Makina is intended for use in conventional and CNC turning centres where stable set-up and reduced overhang are required. How does insert replacement affect production? Using CCMT 1204 indexable inserts enables quick replacement or indexing, reducing downtime and keeping cycle times predictable. Which product code should be referenced when ordering? Reference SKU TKB161TM for this boring tool when enquiring or ordering via Metav Werkzeuge Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
25-32mm Boring Tool for CCMT 0602 Indexable Inserts, M12 Thread, 72mm Overall Length - Teknik Makina
Take advantage of robust compatibility and tight finishing capability for a reliable internal boring cycle; the combination of a CCMT 0602 indexable insert system, a diameter range of Ø25–32 mm and a compact overall length of 72 mm supports stable, repeatable results in steel turning. Order directly via Metav Werkzeuge or consult the technical team for application-specific advice. Boring tool for CCMT 0602 indexable inserts (THKB102TM) — Ø25–32 mm, M12 by Teknik Makina The Boring tool for CCMT 0602 indexable inserts is an internal boring bar engineered for precision steel machining and finishing across a 25–32 mm diameter band Compatible with CCMT 0602 indexable inserts Diameter range Ø25–32 mm Fine finishing capability 0.02 mm M12 mounting, overall length 72 mm High-precision finishing for repeatable tolerances This boring bar is designed to deliver consistent surface quality and dimensional accuracy when working on steel components. With a declared fine finishing capability of 0.02 mm, the tool enables tight tolerance attainment in finishing passes; the specification indicates the achievable surface control rather than a guaranteed single-cycle tolerance, and is best interpreted within a defined machining strategy (cutting data, insert geometry, clamping and machine rigidity). The use of indexable inserts reduces set-up time and keeps process repeatability high: worn edges can be replaced without regrinding the holder, maintaining productivity while controlling cost per part. The focus on measurable finishing performance supports planning for downstream processes such as heat treatment or assembly. Secure mounting and flexible application range The holder accepts standard CCMT 0602 inserts and is engineered for secure attachment via an M12 thread, providing a rigid connection that limits vibration and improves tool life. The tool’s effective working span covers Ø25–32 mm, which makes it suitable for common internal boring diameters encountered in component manufacturing. Shorter overhang and a compact 72 mm overall length reduce leverage at the cutting edge, lowering the risk of chatter and enabling higher surface quality at typical cutting speeds for steel. For workshops employing indexable turning systems, the component simplifies inventory by aligning with widely used insert types and geometries. Built for stable steel turning with efficient handling Constructed for demanding steel machining tasks, the holder balances rigidity with a low mass—its listed weight of 0.194 kg contributes to easier handling during tool changes while preserving stability during cuts. The indexable insert concept means faster recovery from tool wear and straightforward insert replacement, which supports continuous operation on production lines and small-batch shops alike. Where attention to cycle time and part quality is required, the combination of compatible insert format and compact geometry allows process optimisation: fewer tool change interruptions and predictable finishing outcomes support higher overall throughput and lower scrap rates. For application-specific recommendations or to procure the Teknik Makina boring tool THKB102TM through Metav Werkzeuge, request a tailored machining consultation from the Emmerich team or arrange purchase via the Metav Werkzeuge sales desk. Technical data Article number: THKB102TM Manufacturer: Teknik Makina ECLASS: 21041590 Facts Diameter range: Ø25–32 mm Overall length: 72 mm Thread: M12 Fine finishing: 0.02 mm Weight: 0.194 kg Special features Compatible with CCMT 0602 indexable inserts Suitable for steel machining Indexable insert system for fast edge changes Compact design for reduced overhang FAQ What insert type fits this boring holder? The holder is compatible with CCMT 0602 indexable inserts; the design accepts the standard CCMT insert geometry used in turning and finishing applications. Which diameter range is covered by the tool? Internal machining across Ø25–32 mm is supported, making the tool suitable for medium-diameter bore finishing and turning operations. What is the declared finishing capability? A fine finishing capability of 0.02 mm is specified, which refers to achievable control during finish passes under appropriate machining conditions with correct insert geometry and machine rigidity. How is the tool secured in the spindle or adapter? Mounting is provided via an M12 thread, offering a rigid connection that reduces vibration and supports stable cutting performance. Is this tool suitable for heavy roughing operations? The design is optimised for finishing and internal boring where indexable inserts and reduced overhang are advantageous; for heavy roughing, a holder with a larger cross-section or specific roughing geometry is generally recommended. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
250mm Boring Tool For Fine Finishing CCMT 09T3 L212mm - Teknik Makina
Take advantage of a compact, purpose-built boring solution that combines precision finishing, compatibility with CCMT 09T3 indexable inserts and a robust overall length for stable setups; order directly via Metav Werkzeuge or consult their specialists for specification matching and delivery from Emmerich. Finishing Boring Bar THB132TM — Ø250 mm, for CCMT 09T3 indexable inserts (Teknik Makina) Finishing Boring Bar THB132TM is a purpose-designed internal turning tool for high-precision finishing operations in metalworking, optimised for CCMT 09T3 indexable inserts and compact machine configurations. Precision internal finishing tool Compatible with CCMT 09T3 inserts Compact 212 mm overall length Suitable for up to Ø310 mm cutting diameter High-precision finishing for internal bores The THB132TM is engineered for fine machining of internal diameters where consistent surface quality and tight tolerances are required. Its compatibility with CCMT 09T3 indexable inserts enables reproducible results and economical insert changes. In practise, the combination of a stable tool body and proven insert geometry reduces vibration and helps achieve uniform surface finish, which in turn minimises secondary operations and rework. Compact design that improves machine accessibility With an overall length of 212 mm and a nominal tool diameter of 250 mm, this boring bar is designed for use in restricted or short overhang applications. The reduced projection helps maintain rigidity, lowering the risk of chatter and improving tool life. For setups where space is limited, the compact profile provides the pragmatic advantage of enhanced accessibility without sacrificing the cutting envelope, which reaches up to Ø310 mm. Clear productivity gains with indexable technology Using standard CCMT inserts, the tool delivers fast, repeatable index changes and consistent geometry across production batches. Indexable inserts mean lower downtime for tool management and predictable cost control per part. The THB132TM’s design supports straightforward insert clamping and replacement, enabling efficient process planning and a measurable uplift in throughput for finishing operations. Practical suitability across common finishing tasks The boring bar is suitable for precision turning tasks on components requiring fine internal surfaces and form accuracy. Its geometry and insert compatibility make it well suited to finishing cast and machined workpieces where tight dimensional stability is critical. The specification emphasises operational reliability and straightforward integration into existing turning centres, helping maintain production continuity and part quality. Contact Metav Werkzeuge for a tailored delivery and technical match from Emmerich for Teknik Cutting Tools' THB132TM finishing boring bar Technical data Article number: THB132TM Label: 250mm Ausdrehwerkzeug für die Feinbearbeitung CCMT 09T3 L212mm Description: Finishing boring tool for CCMT 09T3 indexable inserts eClass: 21041590 Facts Diameter: 250 mm Total length: 212 mm Maximum cutting diameter: 310 mm Cutting height: 142 mm Special features Compatible with CCMT 09T3 indexable inserts Product type: Finishing boring tool Manufacturer: Teknik Makina SKU: THB132TM UID: THB132TM FAQ Is this boring bar suitable for finishing internal diameters on small lathes? The THB132TM is designed for compact setups and, with its 212 mm overall length and Ø250 mm body, is well suited to smaller turning centres where rigidity and reach are balanced. Which inserts are required for correct operation? This tool is specified for CCMT 09T3 indexable inserts; using the recommended insert geometry ensures the intended finishing performance and surface quality. What maximum bore can be machined with this tool? The tool supports a maximum cutting diameter of Ø310 mm, allowing a broad finishing range within that envelope. How does the design help reduce vibration during finishing cuts? The compact projection and robust body increase rigidity, which reduces chatter and helps achieve a consistent surface finish with the selected CCMT inserts. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
25mm Boring Tool For Fine Finishing 0.02mm Resolution, CCMT 0602 Compatible - Teknik Makina
The combination of precision finishing (0.02 mm), a rigid 25 mm shank and compatibility with CCMT 0602 inserts delivers consistent bore quality and efficient tool changes; order the boring tool directly via Metav Werkzeuge or ask our consultants if needed Boring Tool for Fine Machining — Precision boring holder, CCMT 0602 compatible, Ø25 mm shank by Teknik Makina The Boring Tool for Fine Machining is a precision holder engineered for finishing operations on machined bores; it is optimised for indexable insert turning and compact workshop integration Precision finish tolerance 0.02 mm Compatible with CCMT 0602 inserts 25 mm shank diameter Cutting diameter up to 32 mm Delivering repeatable precision for finishing operations Engineered for fine finishing, this boring holder is specified for a 0.02 mm finish tolerance, which means that consistent bore geometry is achieved with each pass. The tight tolerance is particularly valuable where surface quality and dimensional consistency determine part acceptance. The toolholder design minimises deflection during light cuts and allows predictable machining results, so finishing cycles can be planned with confidence and inspection intervals reduced. The role of indexable tooling is explained by its ability to restore a fresh cutting edge quickly; the use of standardised inserts supports fast reconditioning of the cutting edge. Rigidity and geometry that reduce vibration and improve surface quality A substantial 25 mm shank and an overall length of 156 mm provide the necessary stiffness for finishing bores while keeping overhang controlled. The combination of shank diameter and effective cutting length (shank cutting length 100 mm) reduces chatter and contributes to superior surface finishes. By limiting elastic deflection, the holder supports finer feed settings and lower cutting forces, which translates into improved roundness and a more uniform lay on the machined surface. For workshop planning, this means predictable cycle times and fewer secondary operations. Insert system that speeds up production and simplifies tool logistics The holder accepts CCMT 0602 indexable inserts, a widely available format that allows rapid blade changes and economical rotation of edges. Indexable inserts make it straightforward to switch grades for different materials and to maintain production flow by stocking a limited number of insert grades rather than complete solid tools. The tool supports cutting diameters of up to Ø32 mm, offering flexibility across a range of finishing applications. Lightweight at 0.57 kg, the holder is easy to handle during setup without compromising stability on the machine. Practical integration into workshop and production environments Designed for use on turret lathes and CNC turning centres, this boring holder is targeted at precision job shops and production departments requiring reliable finishing performance. The compact footprint and standard insert interface make it simple to incorporate into existing tool inventories and tool magazines. Inspection results are made more consistent by the holder’s geometry, helping to reduce rework. For customers seeking supply reliability and technical advice, Metav Werkzeuge provides local stock and expertise to support specification and procurement decisions. Contact Metav Werkzeuge in Emmerich for tailored advice on Teknik Makina finishing tools or to arrange a supply; eMail: info@metav-werkzeuge.com — Tel: +49 2822 7131930 Technical data Article number: THKB122TM Manufacturer: Teknik Makina SKU: THKB122TM Facts Fine machining tolerance: 0.02 mm Max cutting diameter: 32 mm Shank diameter: 25 mm Effective cutting length: 100 mm Overall length: 156 mm Weight: 0.57 kg Special features Compatible with CCMT 0602 inserts Designed for fine finishing of bores Indexable-insert holder for fast tool changes FAQ What inserts fit the boring holder? The boring holder accepts CCMT 0602 indexable inserts; this format is compatible with a wide range of grades and geometries for flexible finishing. What accuracy can be expected with this tool? The tool is specified for a 0.02 mm finish tolerance, enabling repeatable bore quality when set up and used under appropriate machining conditions. Which shank size and overall dimensions are provided? The holder features a 25 mm shank diameter and an overall length of 156 mm, with an effective cutting length of 100 mm. What is the maximum cutting diameter for finishing? The holder supports cutting operations up to Ø32 mm, suitable for a variety of finishing bore diameters. Is the Teknik Makina boring tool suitable for automated tool magazines? Yes, the indexable-insert format and compact design allow the Teknik Makina boring tool (SKU THKB122TM) to be integrated into turret and magazine systems where the shank and length match the machine’s toolholders. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
25mm Boring Tool Precision Fine Finishing 0.02mm, CCMT 0602 - Teknik Makina
Take advantage of a compact, rigid design that delivers fine finishing to 0.02 mm, supports economical indexable inserts and reduces rework in high-precision turning operations; order directly via Metav Werkzeuge for reliable supply and expert advice. Boring tool for fine machining — CCMT 0602 compatible, Ø32 mm by Teknik Makina The Boring tool for fine machining is a precision internal boring bar engineered for tight-tolerance finishing in CNC turning centres and toolroom lathes. Precision fine finishing to 0.02 mm Compatible with CCMT 0602 inserts Ø32 mm max cutting diameter 25 mm shank diameter for stable clamping Consistent fine finishing with minimal rework This boring bar is designed to deliver repeatable surface quality on finishing passes. The specified machining capability of 0.02 mm means that the tool is optimised for close-tolerance internal bore work, reducing the need for secondary operations. Using an indexable insert system such as CCMT 0602 provides cost-effective tool life: worn edges can be indexed or replaced quickly, which keeps machine downtime low and production flow steady. Rigidity and handling that improve process stability A robust 25 mm shank and a 50 mm effective cutting length ensure stable clamping and reduced vibration during machining. The combination of a 25 mm shank, 50 mm cutting length and an overall length of 106 mm gives a compact footprint that improves accessibility in confined bores while maintaining the rigidity required for high-quality finishes. The tool’s 0.402 kg mass contributes to controlled dynamics without adding unnecessary weight to the turret or toolpost. Simple integration into workshop routines The tool accepts common CCMT 0602 indexable inserts, which simplifies procurement and tool management. Compatibility with widely used inserts makes it straightforward to service and replenish consumables. For operations aiming to streamline tooling, this solution aligns with standard insert stocks and shortens changeover times. Metav Werkzeuge’s presence in Emmerich acts as a quality filter and reliable distribution point for Teknik Makina products, supporting uninterrupted workshop supply. For precision finishing with Teknik Makina tools, request the THKB120TM from Metav Werkzeuge — Metav’s specialists in Emmerich can advise on insert selection and delivery: info@metav-werkzeuge.com · +49 2822 7131930 Technical data Article number: THKB120TM Manufacturer: Teknik Makina Product: Boring tool for fine machining Compatible inserts: CCMT 0602 ECLASS: 21041590 Facts Max cutting diameter: 32 mm Shank diameter: 25 mm Cutting length: 50 mm Overall length: 106 mm Fine machining capability: 0.02 mm Weight: 0.402 kg Special features Indexable insert holder for economical use Compact, rigid design for finishing passes Suited to CNC turning centres and toolroom lathes Fast insert change and low downtime FAQ Which inserts fit this boring bar? The THKB120TM accepts CCMT 0602 indexable inserts; Teknik Makina designed the holder to suit this common insert format for ease of procurement and cost-effective indexing. What finish tolerance can be expected? For finishing operations the tool is specified for 0.02 mm capability, enabling tight internal bore control when set up with appropriate feeds and speeds. Is the tool suitable for use in CNC turning centres? Yes — the boring bar is tailored for internal finishing in CNC turning centres and similar machines where stable clamping and short overhangs are achievable. How are inserts replaced on this holder? Inserts for THKB120TM are replaced in the standard manner for indexable systems: secure the tool, remove the clamp screw, replace or index the CCMT 0602 insert, and re-torque to the specified value for reliable clamping. What clamping recommendations apply? Clamp the 25 mm shank securely in the turret or toolholder and minimise overhang to preserve rigidity; the design aims to reduce vibration and maintain surface quality during finishing cuts. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com