45mm Cartridge for Boring Tool 45-56 CCMT 09T3, Precision - Teknik Makina
Take advantage of a genuine Teknik Makina cartridge that ensures correct seating for CCMT 09T3 inserts and precise compatibility with boring tools in the 45–56 mm range; this reduces changeover uncertainty and helps maintain production continuity. Order the cartridge directly via Metav Werkzeuge or consult the technical team for application advice. Cartridge for Boring Tool 45–56 CCMT 09T3 — Teknik Makina replacement module with CCMT insert fit The Cartridge for Boring Tool 45–56 CCMT 09T3 is a replacement cartridge designed to accept CCMT 09T3 inserts and to integrate with 45–56 mm boring toolholders for turning and milling support. Compatible with CCMT 09T3 inserts Fits boring tool 45–56 mm range Genuine Teknik Makina component Secure fit and proven compatibility for uninterrupted production A correctly matched cartridge reduces the risk of incorrect insert seating and vibration-related issues. The unit is designed around the CCMT 09T3 insert geometry to provide stable seating and repeatable positioning, which is essential for consistent cutting performance. For procurement and inventory management, compatibility with the 45–56 mm tool range simplifies stocking, lowering administrative complexity while supporting stable production runs. Emphasis on a genuine manufacturer part means fitting tolerances and interface geometry align with the original toolholder design, supporting predictable tool life and process stability. Practical benefits at the toolholder level Replacing a worn or damaged module with a genuine cartridge restores the original interface geometry and helps to avoid compensatory adjustments during setup. The cartridge supports quick replacement routines that can reduce cumulative machine downtime during tool change operations. In practice, this translates to fewer interruptions in machining sequences and more reliable dimensional results from the initial cuts. Where process repeatability matters, a dedicated replacement part matched to the insert designation contributes directly to operational efficiency and reduced rework. Easy maintenance and clearer stock decisions Using a branded cartridge from Teknik Makina makes maintenance cycles more straightforward: spare identification, ordering, and storage rely on established part identifiers rather than improvised substitutions. Clear labelling and the SKU KR106TM enable traceable procurement and easier replenishment planning. For buyers and workshop managers seeking to streamline vendor relations, keeping a single, manufacturer-specific replacement item for the 45–56 mm tool family reduces the variety of spare parts required and simplifies staff training on correct replacement procedures. Confidence through supplier partnership and quality assurance Sourcing components via an experienced distributor ensures parts arrive verified and ready for installation. Metav’s role as a precision partner offers a reliable supply channel and technical consultancy for selection and compatibility checks. That background, combined with a proven manufacturer part, supports both immediate operational needs and longer-term process reliability. Opting for original replacement cartridges helps protect machining integrity and fosters predictable outcomes across diverse turning and boring tasks. Contact Metav Werkzeuge for availability of the Teknik Makina cartridge KR106TM and for application guidance tailored to the intended boring tool 45–56 CCMT 09T3 setup — technical consultants are available via info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical data Article number: KR106TM Part name: Cartridge (Kartusche) Designation: for Boring Tool 45-56 CCMT 09T3 Manufacturer: Teknik Makina Core specifications Bore range compatibility: 45–56 mm Insert designation: CCMT 09T3 Special features Replacement cartridge for boring toolholders Genuine Teknik Makina component SKU for ordering: KR106TM FAQ Is this cartridge compatible with CCMT 09T3 inserts only? The cartridge is specified for use with CCMT 09T3 inserts and the interface is designed to accept that insert geometry for the 45–56 mm tool range. Which boring tool range does this module fit? Compatibility is stated for boring tools sized 45–56 mm, matching common toolholder families that accept CCMT 09T3 inserts. What is the manufacturer of the cartridge KR106TM? The cartridge is a Teknik Makina component, listed under SKU KR106TM for clear identification and procurement. Can the cartridge restore original toolholder performance? Replacing a worn module with this genuine cartridge reinstates the designed seating geometry for inserts, supporting repeatable cutting performance and assembly fit. How should the part be ordered for workshops in Europe? Order via Metav Werkzeuge using the SKU KR106TM; the distributor can confirm availability and dispatch details. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
48mm Boring Tool CCMT 09T3 Insert Hold, 25mm Shank 64mm Cutting Length, 120mm Overall - Teknik Makina
Take advantage of a robust indexable boring solution combining a compact 25 mm shank, a 64 mm cutting length and compatibility with CCMT 09T3 inserts to maintain production continuity and repeatable bore quality; order the boring tool directly via Metav Werkzeuge or ask our consultants if needed. Boring tool TKB112TM – Indexable internal boring bar, compatible with CCMT 09T3 Boring tool TKB112TM is engineered for precise internal machining and finishing operations where stable clamping and a long cutting reach are required Indexable CCMT 09T3 compatibility Ø 37 mm effective diameter 25 mm shank for secure clamping 64 mm cutting length for deep bores Stable internal boring for consistent bore results The TKB112TM is a purpose-built internal boring bar that combines a slender profile with measured rigidity to support accurate machining cycles. Its 25 mm shank is designed for secure fixture in standard toolholders, which reduces micro‑movement and helps preserve repeatability across batches. The tool’s geometry, tailored for CCMT 09T3 indexable inserts, permits rapid insert changes and consistent cutting edges, which shortens downtime and simplifies tool management in production environments. Extended reach for deeper bores with maintained stability With a 64 mm cutting length and an overall length of 120 mm, this boring bar offers an extended working reach while keeping the assembly compact and manageable. The combination of an effective diameter at Ø 37 mm and a cutting‑edge configuration suited to indexable inserts allows operators to perform pocketing and finishing operations in confined internal spaces without sacrificing surface integrity. The tool’s balance between reach and shaft dimension is optimised for machining tasks where access is limited but dimensional control remains critical. Practical handling and fast insert changeover to aid throughput Weighing approximately 0.661 kg, the bar provides a lightweight handling experience without compromising on structural support during cuts. Compatibility with the widely used CCMT 09T3 insert format ensures easy sourcing and predictable cutting behaviour, supporting faster changeovers and reduced tool inventory complexity. The indexable‑insert approach also separates cutting edge life from the tool body, lowering life‑cycle costs and simplifying maintenance procedures in the workshop. For fast, reliable supply and technical guidance on integrating the Teknik Makina TKB112TM boring tool into current tooling setups, contact Metav Werkzeuge in Emmerich via +49 2822 7131930 or info@metav-werkzeuge.com Technical data Article number: TKB112TM Manufacturer: Teknik Makina Facts Diameter: 37 mm Maximum cutting diameter: 48 mm Shank diameter: 25 mm Cutting length: 64 mm Overall length: 120 mm Weight: 0.661 kg Special features Compatibility with CCMT 09T3 indexable inserts Designed for internal boring and finishing Indexable insert concept for quick changeover FAQ What insert type does this boring bar use? The TKB112TM accepts CCMT 09T3 indexable inserts, enabling straightforward insert replacement and standardised cutting geometry. What are the key dimensions to check for machine compatibility? Relevant dimensions for fitting are the 25 mm shank diameter, overall length of 120 mm, and the effective diameter of 37 mm. Is the TKB112TM suitable for deep internal bores? The 64 mm cutting length and extended overall length make the bar suitable for deeper internal machining tasks while maintaining stability. How does the indexable insert system benefit production? Indexable inserts such as CCMT 09T3 allow rapid edge renewal, reduced tool downtime and simplified inventory, improving throughput and cost efficiency. Can the TKB112TM be used with standard toolholders? The 25 mm shank is sized for common clamping systems; verify toolholder bore dimensions and clamping capacity for secure fitting. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
50-82mm Cartridge For Boring Tool, CCMT 09T3 Compatible, Torx T15 - Teknik Makina
Benefit from precise diameter adaptation and secure Torx fastening for a faster, more reliable boring process. The combination of compatibility with CCMT 09T3 inserts and a broad 50–82 mm range supports flexible tool setups and reduced downtime. Order the cartridge directly via Metav Werkzeuge or consult the specialists for application advice. Cartridge 50–82 mm for Boring Tool (THB08TM) – Teknik Makina The Cartridge 50–82 mm for Boring Tool is a precision adapter designed for use in boring tool sets to accommodate diameters from 50 to 82 mm within turning and internal machining applications Cartridge for boring tool sets 50–82 mm range Compatible with CCMT 09T3 indexable inserts Torx T15 fastening with M3.5x8.5 screws SKU THB08TM for quick identification Faster setup through precise diameter adaptation The cartridge delivers a reliable way to adapt boring holders across a wide diameter span without time-consuming custom work. By covering the 50–82 mm range, the adapter reduces the need for multiple dedicated holders and simplifies inventory. This consolidation improves throughput and supports more efficient job planning, while the precise fit helps maintain concentricity and consistent workpiece quality. Secure clamping and straightforward insert compatibility Designed to accept CCMT 09T3 indexable inserts, the cartridge enables simple cutting-edge replacement with established carbide grades. The clamping is secured by a Torx T15 drive and M3.5x8.5 screws, ensuring firm retention under machining loads and minimising the risk of loosening during operation. Clear mechanical fixing translates into stable cutting conditions and predictable surface finishes for internal turning and boring operations. Practical benefits for workshops and small-series production The cartridge is particularly suited to machine shops and maintenance workshops that require flexibility and short changeover times. The compact adapter supports quick swapping between toolheads and guarantees repeatable positioning, which is valuable for small-series production and repair work. Combined with a partner such as Metav, this component helps streamline the tool park and maintain supply reliability for everyday manufacturing demands. For application guidance or to arrange a supply from Metav Werkzeuge, contact our consultants who can advise on compatibility and delivery from the Emmerich stock. Technical data Article number: THB08TM Description: Cartridge 50–82 mm for Boring Tool Manufacturer: Teknik Makina eClass: 21041590 Facts Diameter range: 50–82 mm Torx key size: T15 Torx screw: M3.5x8.5 Suitable inserts: CCMT 09T3 Special features Designed for use in boring tool sets Indexable insert compatibility Secure Torx fastening system FAQ Which insert type fits this cartridge? The cartridge accepts CCMT 09T3 indexable inserts and is configured for their standard seating and clamping. What diameter range does the cartridge cover? The adapter covers a diameter range of 50–82 mm for internal boring operations. What fastening system is used for the tool clamping? Clamping is secured via a Torx T15 drive using M3.5x8.5 screws for reliable retention. Is this cartridge suitable for general workshop use? Yes, the cartridge is intended for machine shops and workshops requiring flexibility and quick tool changes. What is the product SKU for ordering? The SKU for ordering and identification is THB08TM. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
50mm Boring Tool For Fine Finishing 0.01mm Precision, CCMT 0602 - Teknik Makina
Take advantage of a compact, rigid design and indexable-insert compatibility for reliable fine internal finishing; the combination of a 25 mm shank, 189 mm cutting length and insert-based system supports consistent productivity and low downtime. Order the tool directly via Metav Werkzeuge or consult our specialists for application advice. Boring bar THKB136TM – indexable-insert boring tool for fine machining (Ø 40 mm, CCMT 0602) by Teknik Makina The Boring bar THKB136TM is a purpose-built internal boring tool for precision finishing in turning applications, engineered for tight tolerances and stable chip control Fine finish to 0.01 mm Accepts CCMT 0602 inserts Ø 40 mm cutting diameter 25 mm shank, 245 mm overall length Deliver consistent finishes with measurable tolerances The tool is designed to deliver a fine finish down to 0.01 mm, making it suitable for precision internal machining where reproducible surface quality is mandatory. Using an indexable-insert system ensures repeatable cutting geometry; this stability reduces the need for secondary operations and lowers scrap rates. Clear numerical targets, such as the achievable tolerance and provided cutting diameters, create a verifiable basis for process planning and quality control. Rigid geometry reduces vibration and improves tool life A 25 mm shank combined with an overall length of 245 mm and a cutting length of 189 mm provides a balanced ratio between reach and rigidity. This geometry limits deflection during boring cycles, which in turn preserves insert life and enhances dimensional accuracy. The unit's mass (approx. 1.723 kg) contributes to damping, helping to maintain a constant cutting force and stable chip formation across the intended bore sizes. Versatile insert system for efficient workshop logistics Compatibility with CCMT 0602 indexable inserts allows quick tool reconditioning and a consistent cutting edge across different batches. The bar supports a nominal Ø 40 mm cutting diameter with a maximum cutting capability up to 50 mm, covering a common range of internal finishing tasks. Standardising on widely available inserts lowers stocking complexity and reduces machine downtime during insert changes, improving overall throughput. Practical benefits for production planning and setup The combination of measurable parameters and a standard insert interface simplifies fixture and holder selection, while the tool's specifications enable predictable cycle times. The design supports integration into existing boring toolholders that accept a 25 mm shank, making retrofits straightforward. For process engineers, the clear data on diameter limits, cutting length and repeatable finishing tolerance supports confident machining parameter selection and risk mitigation. Contact Metav Werkzeuge for tailored application advice and to arrange delivery of the Teknik Makina THKB136TM — our Emmerich team is available to discuss suitability, delivery times and integration into existing setups. Technical data Article number: THKB136TM Manufacturer: Teknik Makina Type: Boring tool for fine machining ECLASS: 21041590 Numbers / Core technical data Cutting diameter max: 50 mm Nominal cutting diameter: 40 mm Shank diameter: 25 mm Cutting/shank length: 189 mm Overall length: 245 mm Weight: 1.723 kg Fine machining tolerance: 0.01 mm Special features / Versions For indexable inserts CCMT 0602 Designed for fine internal finishing Indexable-insert system for quick replacement Suitable for precision turning applications FAQ What insert type does this boring bar use? The THKB136TM is designed to accept CCMT 0602 indexable inserts, enabling fast replacement and consistent cutting geometry. What bore sizes can be machined with this tool? The tool covers a nominal cutting diameter of Ø 40 mm and can be used up to a maximum cutting capability of 50 mm depending on application parameters. How does the shank size affect setup? A 25 mm shank gives a robust connection to standard boring holders; for secure clamping, select holders rated for a 25 mm diameter shank to maintain rigidity and accuracy. What level of surface precision is achievable? The design targets fine finishing down to 0.01 mm, providing a reliable baseline for achieving tight dimensional tolerances in internal machining. Is the THKB136TM suitable for long-reach boring? With an overall length of 245 mm and a cutting length of 189 mm, the bar balances reach and stiffness; for extended-reach requirements, assess toolholder rigidity and process parameters to avoid deflection. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
50mm Boring Tool For Fine Finishing 0.01mm Resolution, CCMT 09T3 Insert Compatibility - Teknik Makina
Take advantage of a tool that combines high repeatability with straightforward insert compatibility: the compact design delivers fine finishing down to 0.01 mm, supports a maximum cutting diameter of 65 mm and accepts standard CCMT inserts for fast set-up. Order directly via Metav Werkzeuge or consult the Metav specialists for application advice. Boring tool for fine finishing THKB140TM by Teknik Makina — 50 mm nominal diameter, 0.01 mm finish accuracy The Boring tool for fine finishing THKB140TM is an internal boring bar engineered for precision finishing in CNC turning applications, delivering stable performance for batch and single-part production. Fine finishing capability to 0.01 mm Compatible with CCMT 09T3 inserts Shank Ø 32 mm for rigid clamping Max cutting diameter 65 mm Keep tolerances tight with reliable fine finishing The THKB140TM is designed to produce consistent part quality by enabling finish passes with a nominal repeatability down to 0.01 mm. This level of accuracy is achieved through a balanced combination of a rigid tool body and a long cutting reach, which together reduce deflection during light cuts. Where small surface deviations matter, the controlled geometry of the boring bar ensures that finishing cuts remove just the right amount of material, so inspection intervals are reduced and downstream processes remain predictable. The result is fewer reworks and a more efficient production flow. Stable clamping that cuts chatter and extends tool life A robust shank with a diameter of Ø 32 mm and an overall length of 190 mm provides the axial and radial stiffness required for vibration‑free machining when finishing internal bores. With a cutting length of 130 mm and a maximal cutting diameter of 65 mm, the tool maintains a secure interface with the machine spindle or tool post, which keeps cutting forces steady and minimises micro‑movement. Reduced vibration not only improves surface finish but also prolongs the service life of both inserts and holder, supporting longer uninterrupted production runs. Fast set-up through standard insert compatibility The holder is prepared for CCMT 09T3 indexable inserts, a widespread carbide grade and geometry in finishing applications. Using standard CCMT 09T3 inserts means tool changes and re‑grinds are quicker, tooling inventory is easier to manage and downtime is minimised. The insert pocket and clamping system are designed so that insert seating is positive and repeatable; consequently, interchangeability between identical holders is straightforward and set-ups can be standardised across a shop floor. Integrates smoothly into workshop routines and production planning With a nominal diameter of 50 mm, a weight of 2.135 kg and compact overall dimensions, this boring bar is suitable for integration into conventional lathe and CNC turning cells without significant fixturing changes. The design supports fine finishing operations where surface quality and dimension control are priorities, and the combination of length and stiffness is optimised to keep cutting forces predictable. Metav’s supply chain and quality screening in Emmerich provide traceable sourcing and consistent availability, which supports reliable scheduling for medium and long production runs. Contact Metav Werkzeuge to discuss application suitability for the Teknik Makina THKB140TM and arrange specification details or delivery directly from Emmerich; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: THKB140TM Manufacturer: Teknik Makina ECLASS: 21041590 Core specifications Fine finishing tolerance: 0.01 mm Max cutting diameter: 65 mm Nominal diameter: 50 mm Overall length: 190 mm Cutting length: 130 mm Shank diameter: 32 mm Weight: 2.135 kg Features & compatibility For CCMT 09T3 indexable inserts Intended for fine finishing internal boring Suitable for CNC turning applications Brand: Teknik Makina FAQ What insert type does the tool use? The THKB140TM accepts CCMT 09T3 indexable inserts; this allows for fast replacement and common insert inventory across finishing tooling. What level of finishing accuracy is achievable? The boring bar is specified for fine finishing with a repeatability target of 0.01 mm, suitable for tight tolerance internal bores. What are the maximum and nominal diameters for use? Maximum cutting diameter is 65 mm while the nominal holder diameter is 50 mm, providing a balance of reach and stiffness. What are the key dimensions that affect setup? Relevant dimensions are overall length 190 mm, cutting length 130 mm and shank diameter 32 mm, which determine clamping and overhang requirements. Is the tool suitable for series production? Yes — the combination of standard insert compatibility and a rigid shank design makes the holder appropriate for repeated finishing operations in production environments. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah. 422 Nolu Sokak No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
50mm Boring Tool For Fine Machining 0.01mm Resolution, CCMT 09T3 Insert Compatible - Teknik Makina
Take advantage of a combination of precision finishing, robust shaft design and compatibility with standard CCMT inserts for consistent internal-surface quality; order the tool via Metav Werkzeuge or consult our specialists for application-specific advice. Fine finishing boring tool by Teknik Makina — Ø50 mm, compatible with CCMT 09T3 inserts A Fine finishing boring tool engineered for high-precision internal finishing in CNC and lathe operations, offering a long cutting length for deep bores. Fine finishing tolerance 0.01 mm Compatible with CCMT 09T3 inserts Shaft Ø32 mm for increased rigidity Max cutting diameter 65 mm Precise finishing for demanding internal surfaces This machining solution is designed to deliver repeatable fine finishing with a verified tolerance of 0.01 mm, making it suitable for applications where surface quality and dimensional fidelity are critical. The tool’s nominal diameter of Ø50 mm and its extended cutting length 220 mm mean fewer insert changes and longer uninterrupted operations when working on deep bores. The combination of a robust shaft Ø32 mm and a total length of 280 mm provides improved stability that reduces chatter, which in turn delivers better surface finish and less post-process rework. Productivity gains through proven tool geometry With a maximum cutting capacity of 65 mm, the boring holder supports efficient material removal while preserving finishing quality. The holder is specified for CCMT 09T3 indexable inserts, an industry-standard grade that balances wear resistance and edge sharpness for finishing passes. Using standard inserts simplifies tooling logistics and reduces set-up times. The tool’s mass of 3.383 kg contributes to steadier cutting dynamics on medium and heavy-duty machines, allowing for slightly higher feed stability without sacrificing the delicate controls needed for finishing. Application range and user advantages Built for CNC shops, toolrooms and contract manufacturers, this holder is best applied where internal diameters require consistent roundness and micro-accuracy. The long effective cutting length supports deep-bore finishing in components such as hydraulic bodies, sleeves and precision housings. Because the design accepts widely available CCMT inserts, workshop teams benefit from broad insert availability and predictable performance, which helps keep throughput steady and inventory manageable. Integration, maintenance and quality assurance The boring holder’s compatibility with standard inserts and its straightforward clamping geometry make mounting and index changes quick and intuitive. Regular inspection of insert seating and torque on the clamping screws will preserve the tool’s precision across production runs; replacement inserts should match the CCMT 09T3 designation for intended finish behaviour. For application-specific parameters such as cutting speeds and feeds, Metav Werkzeuge’s technical advisers can provide guidance to match machine rigidity and workpiece material, helping to achieve the best balance between surface integrity and productivity. For applications demanding precise internal finishing, select the Teknik Cutting Tools boring solution and contact Metav Werkzeuge for tailored machining recommendations and reliable supply from Emmerich — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: THKB142TM Manufacturer: Teknik Makina Product name: Ausdrehwerkzeug für die Feinbearbeitung Core measurements Nominal diameter: 50 mm Max cutting diameter: 65 mm Overall length: 280 mm Cutting length (shaft): 220 mm Shaft diameter: 32 mm Fine finishing tolerance: 0.01 mm Weight: 3.383 kg Compatible inserts: CCMT 09T3 Features / Special characteristics Designed for fine internal finishing Accepts CCMT 09T3 indexable inserts Long cutting reach for deep bores Robust shaft for reduced vibration FAQ What materials is this boring holder suitable for? This fine finishing boring tool is intended primarily for metal finishing operations; compatibility with specific materials depends on the chosen CCMT insert grade and cutting parameters. Which insert type must be used with the tool? The holder is specified for CCMT 09T3 indexable inserts; using the correct grade and geometry of CCMT inserts ensures the intended finishing performance. How deep can this tool reach for finishing operations? The effective cutting length of the tool’s shaft is 220 mm, with an overall length of 280 mm, allowing deep-bore finishing where required. What tolerance can be expected from the finished bore? Designed for fine finishing, the tooling supports a finishing capability down to 0.01 mm under appropriate machine and process conditions. Is the tool suitable for high-speed finishing? High-speed suitability depends on machine rigidity, insert selection and cutting parameters; the holder itself is configured to improve stability through its shaft Ø32 mm design. Teknik Makina: Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
50mm Fine Boring Tool For Precision Finishing 0.01mm Resolution, 32mm Shank - Teknik Makina
Take advantage of a combination of precise fine finishing, robust clamping and indexable-insert economy for consistent internal bore quality; order the Teknnik Makina THKB138TM via Metav Werkzeuge or consult our specialists for application-specific guidance. Fine Finishing Boring Tool THKB138TM — Teknik Makina | CCMT 09T3 compatible, 65 mm max cutting diameter The Fine Finishing Boring Tool THKB138TM is designed for precision internal machining, delivering controlled material removal during fine finishing operations in turning and boring applications Compatible with CCMT 09T3 indexable inserts Fine finishing down to 0.01 mm tolerance 65 mm max cutting diameter for deep bores 32 mm shank for rigid clamping Precision that secures finished bore quality The THKB138TM is engineered for fine finishing with a documented process capability down to 0.01 mm, which translates to consistently tight surface form and size control on internal diameters. This level of fineness reduces downstream rework and simplifies quality assurance routines by narrowing dimensional scatter. For shops transitioning from solid tooling to insert solutions, the controlled cutting action of a dedicated boring bar reduces vibration and improves surface integrity for subsequent assembly or coating processes. Rigidity and reach for reliable machining cycles A 32 mm shank and 125 mm overall length combine to provide a balance between reach and stiffness. The 65 mm cutting length allows access to deeper bores while maintaining the clamping stability needed for repeatable passes. This geometry minimises deflection during the cut, so finishing passes remain predictable even when working across a series of similar components. The tool's mass of 1.231 kg contributes to damping, supporting smoother surface generation on the workpiece. Economical operation with indexable inserts Compatibility with CCMT 09T3 indexable inserts offers clear economic and process benefits: carbide inserts can be rotated to present a fresh edge, reducing downtime compared with regrinding solid tools. The insert system also simplifies inventory — standard CCMT grades cover a wide range of materials and coating options — while allowing quick optimisation of cutting data for different alloys. Using replaceable inserts reduces total cost of ownership and keeps machine utilisation high in production settings. Integrating the tool into workshop workflows This boring bar suits precision turning and CNC boring operations where fine internal finishing is required. Its specification supports a pragmatic approach to fixture design and toolholder selection: the 50 mm nominal diameter and the 65 mm maximum cutting diameter together define the envelope of parts that can be addressed without extensive retooling. For engineers seeking to refine internal surface quality or shorten finishing cycles, the holder simplifies changeover and aligns with common tooling systems in light- to medium-duty production environments. Contact Metav Werkzeuge today to discuss application-specific recommendations and secure the Teknik Makina Fine Finishing Boring Tool THKB138TM tailored to the required bore tolerances Technical data Article number: THKB138TM Manufacturer: Teknik Makina Numeric data Nominal diameter: 50 mm Max cutting diameter: 65 mm Shank diameter: 32 mm Cutting length: 65 mm Overall length: 125 mm Fine finishing capability: 0.01 mm Weight: 1.231 kg Designs and special features Compatible inserts: CCMT 09T3 Indexable-insert boring bar design Intended for fine finishing internal machining FAQ What insert type fits this boring bar? The THKB138TM accepts CCMT 09T3 indexable inserts, providing flexible grade and geometry choices for finishing operations. Which nominal and maximum diameters are covered? The tool is specified with a 50 mm nominal diameter and a 65 mm maximum cutting diameter for internal machining. How does the tool support fine finishing requirements? Fine finishing is enabled by the tool geometry and insert system, delivering 0.01 mm level control for reduced rework and consistent surface quality. Is the shank size suitable for rigid clamping? Yes; the 32 mm shank offers a rigid mounting interface that minimises deflection during finishing passes. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
55mm Cartridge for Boring Tool 55-75 CCMT 09T3, Replacement Part - Teknik Makina
Take advantage of the precise compatibility with the 55–75 CCMT 09T3 boring tool and the assured fit of an original Teknik Makina cartridge to reduce set-up variance and secure repeatable results on the shop floor. Order the cartridge directly via Metav Werkzeuge or ask our consultants for tailored advice. Cartridge KR108TM — Cartridge for Boring Tool 55–75 CCMT 09T3 by Teknik Makina, precision fit The Cartridge KR108TM is a dedicated replacement cartridge for the Boring Tool 55–75 CCMT 09T3, designed to ensure a secure interface between insert and holder for industrial boring applications Precision fit for CCMT 09T3 inserts Compatible with 55–75 mm boring tools Original Teknik Makina part Secure mounting for repeatable runs Reduced set-up time through precise compatibility The KR108TM cartridge is engineered to provide a precision fit with CCMT 09T3-style inserts, which directly reduces alignment effort during tool changes. A correctly matched cartridge shortens the machining downtime caused by re‑setting inserts and improves first‑pass accuracy. In practice, a stable cartridge interface translates into fewer adjustments at the machine and a more predictable production rhythm, helping maintain cycle times and component tolerances. Reliable seating and repeatable performance As the interface component between insert and boring body, the cartridge’s role is to deliver secure clamping and consistent seating geometry. This stability enhances repeatability across batches and simplifies quality control: once the cartridge is installed and the insert seated, concentricity and cutting geometry remain stable, which lowers scrap rates and reduces the need for corrective machining. The cartridge also supports consistent chip evacuation and tool life when used with appropriately specified inserts. Integration advice and workshop application The cartridge is specified for use with the 55–75 mm boring range and CCMT 09T3 inserts; compatibility should be verified against the toolholder series and insert specification in the boring assembly. For workshop managers and fitters seeking modularity, this cartridge enables straightforward replacement without modifying the existing holder. If questions remain about matching the cartridge to a particular boring bar or insert grade, Metav Werkzeuge can provide technical clarification to ensure correct integration and efficient deployment. Contact Metav Werkzeuge for expert guidance on integrating Teknik Makina cartridges and to arrange prompt delivery from Emmerich to the workshop bench Technical data Article number: KR108TM Name: Cartridge for Boring Tool 55–75 CCMT 09T3 Manufacturer: Teknik Makina Core data Compatible range: 55–75 mm Insert type: CCMT 09T3 SKU: KR108TM Special features Intended for: Boring tool 55–75 CCMT 09T3 Type: Cartridge Internal ID: KR108TM FAQ Is this cartridge compatible with all 55–75 mm boring bars? Compatibility depends on the boring bar’s clamp and internal seat geometry; the Cartridge KR108TM is specified for boring tools with a 55–75 mm range and CCMT 09T3 inserts and should be checked against the bar’s holder design before fitting. Can the KR108TM be used with different insert grades? Yes, the KR108TM accepts CCMT 09T3 inserts irrespective of carbide grade, but insert coating and grade should be chosen according to the material being machined and the recommended insert data from the insert manufacturer. How does the cartridge affect machining repeatability? By providing a consistent seating surface and secure clamp interface, the cartridge improves concentricity and reduces variation between tool changes, leading to better repeatability across production runs. Are spare cartridges and replacement parts available for this SKU? Spare units corresponding to SKU KR108TM are available as original Teknik Makina parts; consult the product listing or Metav Werkzeuge for stock information and ordering details. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
55mm Cartridge for Boring Tool 55-75 CCMT 1204, Precision - Teknik Makina
Compact design for stable seating and fast changeover—combine precision seating, robust fit and quick replacement to keep production flowing. Order the cartridge directly via Metav Werkzeuge or consult the team for application advice. Cartridge for Boring Tool 55–75 CCMT 1204 — precise seating & quick changeover (Teknik Makina) A cartridge for the 55–75 CCMT 1204 boring tool that secures insert seating and simplifies tool replacement for turning and internal boring operations Secure insert retention Compatible with 55–75 CCMT 1204 Fast replacement for minimal downtime Durable construction for industrial use Improved process stability through precise seating A correctly matched cartridge delivers a measurable advantage in machining consistency. By providing precision seating for the cutting insert, the component reduces micro-movement during cutting, which in turn lowers vibration and improves surface finish. This results in longer tool life and fewer rejects per shift. The focus here is on repeatable, verifiable performance rather than vague claims: a stable holder contributes directly to predictable cycle times and consistent part tolerances. Rapid changeovers to keep machining cells productive Minimising non-productive time is central to modern shopfloor efficiency. The cartridge is designed for quick changeover, permitting fast insert or holder swaps and so reducing fixture downtime between batches. In practice this means set-up windows are shortened and throughput is increased without compromising accuracy. For production planners, this is a concrete operational benefit: less idle spindle time and improved utilisation of turning and boring assets. Clear compatibility and supply reliability for production planning Compatibility with the specified boring tool family is documented, easing procurement and inventory decisions. The cartridge supports the 55–75 CCMT 1204 specification, simplifying parts management for toolrooms and maintenance departments. Sourcing is backed by Metav’s central European distribution, which acts as a quality filter and supply hub; this ensures reliable availability and traceable origin for the replacement component. The overall effect is lower administrative overhead and more dependable production planning. Contact Metav Werkzeuge for tailored availability and application guidance on the Teknik Makina cartridge (SKU KR115TM) for the 55–75 CCMT 1204 — email info@metav-werkzeuge.com or call +49 2822 7131930 for fast consultation and order processing Technical Data Article number: KR115TM Description: Cartridge for Boring Tool 55–75 CCMT 1204 Manufacturer: Teknik Makina Data No core numerical specifications available Special features Compatible with 55–75 CCMT 1204 boring tool Intended for secure insert retention Facilitates quick replacement and minimal set-up time Manufacturer SKU: KR115TM UID: KR115TM FAQ What machines is this cartridge compatible with? The cartridge is specified for use with the 55–75 CCMT 1204 boring tool family; compatibility is stated in the product record for ease of tool selection. How does the cartridge affect machining quality? By providing precision seating and a secure fit, the cartridge reduces micro-movement and vibration, which improves surface finish and tool life when used with the appropriate boring tool. Is replacement straightforward for maintenance teams? Yes, the design supports fast changeover and straightforward swapping of the cartridge and insert, helping to reduce setup time on the shopfloor. Can this component be sourced via Metav Werkzeuge? Metav Werkzeuge lists and supplies the Teknik Makina cartridge (SKU KR115TM) and can advise on stock and compatibility for production needs. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
56mm Boring Tool 120mm Cutting Length 32mm Shank Diameter, CCMT 09T3 Compatible - Teknik Makina
Take advantage of a rigid, indexable solution that combines stable clamping with insert flexibility: the TKB120TM suits internal boring tasks where quick insert replacement and controlled cutting length improve uptime. Order via Metav Werkzeuge or consult their specialists for workshop-ready delivery from Emmerich. Teknik Makina TKB120TM Boring Bar — CCMT 09T3 Compatible, Ø45–56 mm An TKB120TM boring bar engineered for internal boring and turning operations on medium-sized lathes, compatible with CCMT 09T3 indexable inserts. Indexable insert: CCMT 09T3 compatible Max cutting diameter 56 mm 32 mm shank for rigid clamping Overall length 180 mm, cutting length 120 mm Stable support for precision internal machining The TKB120TM combines a 32 mm shank with a balanced body to deliver rigid clamping and consistent cutting conditions. That structural stability reduces chatter and helps achieve repeatable diameters on internal bores. For shops aiming to improve process reliability, the combination of a solid shank and a dedicated cutting length means fewer rejects and less rework, while the measured mass contributes to a controlled cutting feel during heavy cuts. Fast insert changes and economical running costs Designed around indexable inserts, specifically CCMT 09T3, the tool enables quick edge changes without regrinding. This approach lowers tooling overhead and minimises downtime compared with solid-tool reconditioning. The replaceable-insert concept allows the workshop to restore cutting edges in seconds, maintaining cycle times and preserving machine utilisation — a clear rational gain for production environments focused on throughput. Defined reach and machining envelope for consistent results With a 120 mm cutting length and 180 mm overall length, the bar provides a predictable machining envelope that suits many internal turning set-ups. The specified 56 mm max cutting diameter and nominal Ø45 value allow planners to select the tool where bore access and depth are limiting factors. Clear dimensional data supports fixture planning and reduces the need for trial-and-error on the shop floor. Practical handling and compatibility on the machine The tool accepts the common CCMT insert form, making it straightforward to integrate into existing tooling inventories. The moderate weight of the assembly contributes to stability without imposing excessive spindle load, and the standardised shank diameter eases selection of holders and adaptors. For workshops streamlining tool change procedures, the bar’s compatibility with widely used insert geometries supports rapid deployment and consistent surface finishes. Discuss Teknik Cutting Tools’ TKB120TM with Metav Werkzeuge for a tailored recommendation and fast supply from Emmerich to the workshop bench Technical data Article number: TKB120TM Manufacturer: Teknik Makina Product: Boring tool Facts Max cutting diameter: 56 mm Shank diameter: 32 mm Cutting length (shank): 120 mm Overall length: 180 mm Weight: 1.528 kg Special features Insert type: CCMT 09T3 Nominal diameter: 45 mm Compatible with indexable inserts FAQ What insert type does this boring bar use? The TKB120TM is specified for CCMT 09T3 indexable inserts, allowing rapid edge changes and standardised insert stock. Which shank size is required for clamping? Clamping is based on a 32 mm shank; the TKB120TM’s shank diameter ensures firm mounting in suitable tool holders. What is the maximum cutting diameter available with the tool? The tool supports a maximum cutting diameter of 56 mm, with a nominal diameter entry of 45 mm for planning bore access. How long is the effective cutting length? The cutting length is 120 mm, while the overall bar length is 180 mm, providing a defined machining reach for internal operations. Is the TKB120TM suitable for quick tool changes in production environments? Yes — the TKB120TM’s use of indexable CCMT inserts and standard shank dimensions facilitates fast insert replacement and straightforward integration into existing tooling routines. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
65mm Boring Tool For Fine Finishing 0.01mm Precision, 32mm Shank - Teknik Makina
Take advantage of the combination of precision finishing to 0.01 mm, a robust 32 mm shank and compatibility with CCMT 09T3 inserts to secure consistent bore quality and shorter setup times; order the boring tool directly via Metav Werkzeuge or contact our consultants for integration advice. Boring tool for fine machining – Internal boring bar, CCMT 09T3, Ø65 mm (Teknik Makina) The boring tool for fine machining is designed for high-precision internal finishing where stable clamping and repeatable surface quality are required in production and maintenance environments. Precision finish to 0.01 mm tolerance Compatible with CCMT 09T3 inserts Max cutting diameter 80 mm Robust 32 mm shank for stable clamping Achieve consistent bore quality with measurable precision This tool is engineered for repeatable, high-accuracy internal machining: with a fine machining tolerance of 0.01 mm the holder reduces rework and inspection time, which translates into higher throughput and lower scrap rates. The combination of a 32 mm shank and the specified cutting geometry ensures reduced vibration and improved surface integrity, so the finished bore meets dimensional and form requirements more reliably. For operations where cycle time and first-pass yield matter, this configuration supports predictable results and easier process control. Designed for efficient integration and insert versatility The holder accepts CCMT 09T3 indexable inserts, offering flexibility to adapt grade and geometry to specific materials and cutting conditions. Using standard insert formats simplifies tool inventory and reduces changeover complexity while enabling efficient optimisation for finish passes. The tool’s cutting length of 220 mm and overall length of 280 mm permit access to deeper bores without excessive overhang, maintaining stiffness and minimising runout when mounted in an appropriate toolholder. Productivity gains through stable clamping and larger bore capability With a maximum cutting diameter of 80 mm and a nominal body diameter of 65 mm, the tool covers a broad range of internal finishing tasks that previously required multiple special holders. The robust shank promotes secure clamping in standard toolposts or holders, improving concentricity and reducing tool wear. These performance aspects combine to lower machining times and extend insert life, supporting a favourable cost-per-part calculation for medium to high-volume production. Practical considerations for workshop use and maintenance The design focuses on user-friendly serviceability: standard insert geometry means quick index changes and minimal downtime, while the solid construction supports repeatable setups. Although insert choice and cutting data must be matched to the workpiece material and machine rigidity, the holder’s specifications—shank Ø 32 mm, cutting length 220 mm—make the tool straightforward to integrate into existing turning centres. Regular inspection of clamping faces and correct torque on the insert screws will preserve accuracy and prolong service life. Contact Metav Werkzeuge for tailored cutting data, delivery options and to arrange procurement of the Teknik Cutting Tools boring bar THKB148TM; phone +49 2822 7131930 or email info@metav-werkzeuge.com for personalised advice from our specialists Technical data Article number: THKB148TM Manufacturer: Teknik Makina Designation: Boring tool for fine machining Core specifications Max cutting diameter: 80 mm Diameter: 65 mm Overall length: 280 mm Shank diameter: 32 mm Cutting length: 220 mm Fine machining tolerance: 0.01 mm Weight: 3.895 kg Features & compatibility Inserts: CCMT 09T3 Suitable for fine internal finishing Robust shank for stable clamping FAQ Can the boring tool achieve a 0.01 mm finish consistently? The boring tool for fine machining is specified for 0.01 mm fine machining tolerance and, when combined with suitable inserts and stable machine setup, will deliver highly repeatable bore finishes. Which inserts fit the holder? Compatibility is with CCMT 09T3 indexable inserts; the THKB148TM holder accepts this standard format to allow easy selection of grades and geometries for different materials. What bore diameters can be machined with this tool? The holder supports a maximum cutting diameter of 80 mm and a nominal body diameter of 65 mm, covering a wide range of internal finishing applications. Is the shank suitable for rigid clamping in standard toolholders? The 32 mm shank provides a robust interface for secure clamping in conventional toolposts or toolholders, reducing vibration and improving concentricity. How deep can the tool reach for internal finishing? With a cutting length of 220 mm and an overall length of 280 mm, the tool permits access to moderately deep bores while maintaining stiffness for precision finishing. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
65mm Boring Tool For Fine Machining 0.01mm Resolution, CCMT 09T3 Insert Compatible - Teknik Makina
Take advantage of a rigid toolbody and proven indexable insert system to achieve consistent surface quality and reduced machining time; the combination of a 32 mm shank, 65 mm cutting diameter and compatibility with CCMT 09T3 inserts ensures efficient finish turning operations. Order the boring bar directly via Metav Werkzeuge or consult the technical advisors for application-specific advice. Boring bar for finish machining — Teknik Makina THKB146TM, Ø65 mm, CCMT 09T3 A boring bar for finish machining engineered for precision internal turning and fine surface results in production and workshop environments Precision finish tolerance 0.01 mm Fits CCMT 09T3 indexable inserts 65 mm cutting diameter for larger bores 32 mm shank, 190 mm overall length Accurate finishing for consistent part quality The design delivers repeatable precision in finishing cuts, enabling tolerances down to 0.01 mm for bore machining where surface condition and roundness are critical. By limiting material removal per pass, the tool reduces induced stresses and helps preserve bore geometry; this makes it well suited to applications requiring tight dimensional control. The integrated geometry and balanced mass distribution support a stable cut, which in turn improves surface finish and reduces the need for secondary operations. Stiffness and stability that reduce vibration and rework A robust 32 mm shank combined with a substantial body mass promotes rigidity at the cutting edge, lowering the risk of chatter during internal turning. The tool is optimised around a central cutting diameter of 65 mm, with a maximum cutting diameter capability of 80 mm, offering flexibility across a range of medium-sized bores. Compatibility with CCMT 09T3 indexable inserts allows rapid insert changes and predictable cutting behaviour, translating into lower toolholding costs and shorter set-up times for batch production. Practical geometry and easy integration into machining cells With a 190 mm overall length and a 130 mm cutting length, the bar fits common turret and toolpost arrangements while providing the reach required for deeper bores. The use of standard indexable inserts simplifies procurement and inventory management; spare inserts can be stocked without bespoke grinding or reconditioning. The construction balances reach with stiffness to maintain cutting performance without excessive overhang. For process planning, the tool allows straightforward parameter selection based on standard insert grades and cutting data. Production-oriented benefits and workshop support Specifying a tool with proven insert compatibility and a focus on finish turning reduces both tooling complexity and downtime in serial production. The combination of efficient changeover, stable cutting conditions, and a standard insert format supports predictable machining cycles and cost control. Technical advisors can provide specification checks and advice on insert grades and cutting data to match individual applications in industry and trade. For precision internal turning, specify the Teknik Makina THKB146TM boring bar and contact Metav Werkzeuge in Emmerich for tailored application advice and availability — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: THKB146TM Designation: Boring bar for finish machining Manufacturer: Teknik Makina ECLASS: 21041590 Facts Fine machining tolerance: 0.01 mm Cutting diameter (nominal): 65 mm Cutting diameter (max): 80 mm Overall length: 190 mm Cutting length: 130 mm Shank diameter: 32 mm Weight: 2.547 kg Special features Indexable insert type: CCMT 09T3 Application: finish machining SKU: THKB146TM FAQ What machining accuracy can be expected with this tool? The THKB146TM boring bar from Teknik Makina is designed for finish operations and can achieve a machining accuracy of 0.01 mm under appropriate setup and cutting conditions. Which inserts are compatible with the tool? Compatibility is provided for CCMT 09T3 indexable inserts, allowing use of common grades for finishing and easing procurement. For which bore diameters is the tool suitable? The bar is optimised for a nominal cutting diameter of 65 mm and supports a maximum cutting diameter of 80 mm depending on insert choice and machine capability. What are the length and weight specifications? Overall length is 190 mm, cutting length is 130 mm, and the tool weighs 2.547 kg, which aids in stability during internal turning. What provides the tool's rigidity during operation? The 32 mm shank diameter and robust body design contribute to rigidity and reduced vibration for consistent finish quality with the THKB146TM boring bar. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
70mm Boring Bar CCMT 09T3 Compatible, 40mm Shank, 220mm Cutting Length - Teknik Makina
Robust, indexable boring bar engineered for stable internal machining: the combination of a 40 mm shank, long 220 mm cutting length and compatibility with CCMT 09T3 inserts ensures consistent results and reduced setup time. Order directly via Metav Werkzeuge or consult our specialists for application advice. Teknik Makina TKB134TM Boring Bar — Indexable for CCMT 09T3, Ø70 mm The Teknik Makina TKB134TM is a heavy‑duty boring bar designed for precision internal machining in metalworking and CNC turning centres. Indexable inserts CCMT 09T3 compatible Max cutting diameter 90 mm Robust 40 mm shank, 290 mm overall length Enhanced rigidity for deep, accurate internal cuts The TKB134TM delivers increased rigidity through a substantial 40 mm shank and a carefully balanced mass, which reduces vibration during deep internal cuts. With a 220 mm cutting length and a listed 90 mm maximum cutting diameter, the toolholder maintains bore tolerances and roundness even under interrupted cuts. This mechanical stability translates into fewer reworks and predictable machining cycles on production lines, supporting higher first‑pass yield and lower tool change frequency. Fast insert changes and consistent surface quality Compatibility with indexable inserts in the CCMT 09T3 format offers straightforward, repeatable insert replacement and easy geometry selection for a range of turning tasks. The insert system allows for quick changeovers and cost‑effective maintenance: worn edges are replaced instead of the entire tool, reducing downtime and inventory complexity. Where surface finish is critical, the system supports stable chip control and a consistent surface finish, reducing the need for secondary operations. Built for workshop reliability and simple integration Constructed for day‑to‑day industrial use, the boring bar’s overall length of 290 mm and substantial mass (approx. 4.915 kg) afford the kind of stability expected in robust CNC turning operations. The combination of dimensions and build quality makes the bar suitable for retrofit into existing tool turrets and tool posts without complex adapters. Metav’s quality‑filter approach means the product arrives documented and ready for immediate use in production environments, supporting predictable lead times and dependable supply for workshop planning. Speak with Metav Werkzeuge for tailored tooling recommendations and procurement details for the Teknik Makina TKB134TM boring bar, delivered reliably from Emmerich with expert consultancy. Technical data Article number: TKB134TM Manufacturer: Teknik Makina Product: Boring bar (indexable) Core dimensions Max cutting diameter: 90 mm Diameter: 70 mm Shank diameter: 40 mm Cutting length: 220 mm Overall length: 290 mm Weight: 4.915 kg Special features Compatible inserts: CCMT 09T3 Insert type: indexable Application: internal machining Heavy‑duty construction FAQ Which insert format fits the boring bar? The TKB134TM uses CCMT 09T3 indexable inserts; this standard format supports rapid replacement and a wide choice of grades for different materials. What is the maximum cutting diameter for this tool? The maximum cutting diameter specified for the tool is 90 mm, with a nominal diameter dimension of 70 mm noted in the technical data. What are the key mounting dimensions? Mounting and integration are facilitated by a 40 mm shank and an overall length of 290 mm, with a 220 mm effective cutting length. Is the boring bar suitable for CNC turning centres? Yes. The TKB134TM is designed for internal machining on metalworking lathes and CNC turning centres where a rigid, indexable solution is required. How heavy is the tool and what does that imply for stability? The tool weight is approximately 4.915 kg, which contributes to stability and dampening during deep boring operations, improving dimensional consistency. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
70mm Boring Tool 85mm Cutting Length 32mm Shank Diameter CCMT 09T3 - Teknik Makina
Take advantage of a rigid, insert-based solution that combines interchangeability and reach: the modular design with CCMT 09T3 compatibility reduces tooling changeover and improves process uptime, while the 32 mm shank and 145 mm overall length ensure stable operation in medium-depth bores. Order the tool directly via Metav Werkzeuge or ask their consultants for specification support. Boring bar TKB130TM — indexable insert boring tool with 32 mm shank and Ø 90 mm capability (Teknik Makina) A Boring bar TKB130TM engineered for precision internal boring using CCMT 09T3 indexable inserts, suitable for workshop and CNC setups requiring modular tooling and repeatable results Suitable for CCMT 09T3 inserts Max cutting diameter 90 mm Shank diameter 32 mm Overall length 145 mm Consistent results from an indexable insert system The TKB130TM delivers repeatable bore geometry by using indexable inserts compatible with CCMT 09T3, allowing worn edges to be rotated or replaced without regrinding the bar. The modular insert approach lowers per-hole tooling cost and shortens downtime compared with solid cutters. With a max cutting diameter 90 mm and a retained, rigid mounting, the tool supports stable cutting conditions that translate into consistent bore finish and dimensional conformity on production runs. Reach and rigidity for medium-depth bores Designed with an 85 mm cutting length and 145 mm overall length, this boring bar provides the reach necessary for deeper internal features while keeping tool overhang moderate to limit chatter. The shank diameter 32 mm contributes to torsional stiffness, and the unit mass of 2.1 kg aids vibration damping during interrupted cuts. These dimensional parameters are intended to support reliable set-up on standard toolholders and ensure the machining geometry remains predictable across cycles. Practical economy and easy maintenance Compatibility with standard CCMT inserts means consumables are widely available and inexpensive to replace, reducing total cost of ownership. The insert seat and clamping concept permit quick changeovers, simplifying maintenance routines and helping to maintain production cadence. Specification choices for insert grade determine the best material applications, so the insert selection is a key variable in optimising performance for specific jobs. Support and integration into the workshop Metav's distribution and technical advisory services act as a quality filter for European customers: the product is supplied via a partner network that combines stocking capability with application guidance. For complex setups or to verify insert grades and cutting data, Metav Werkzeuge's advisors can provide tailored recommendations and ensure a smooth integration of the boring bar into existing CNC workflows. Contact Metav Werkzeuge for a tailored tooling recommendation and a quote for the Teknik Cutting Tools boring bar TKB130TM; Metav Werkzeuge GmbH can advise on insert selection, holder compatibility and setup — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: TKB130TM Manufacturer: Teknik Makina Designation: Ausbohrwerkzeug Facts Max cutting diameter: 90 mm Nominal diameter: 70 mm Shank diameter: 32 mm Cutting length: 85 mm Overall length: 145 mm Weight: 2.1 kg Special features Compatible with CCMT 09T3 indexable inserts Indexable insert mounting for fast changeover Robust shank for reduced vibration Files: 62de7e6333927e49dbf32755, 62de7eef0f56dbb4de4dbf60 FAQ Which insert type fits the boring bar? The boring bar accepts CCMT 09T3 indexable inserts; insert geometry and grade should be chosen according to the workpiece material and machining strategy. What is the maximum bore diameter achievable? The tool supports a max cutting diameter of 90 mm, as specified for the TKB130TM. What are the key dimensions for holder compatibility? Shank diameter is 32 mm and overall length is 145 mm, which are typical values to verify against a clamping holder or boring head. How long is the effective cutting reach? The cutting or insert engagement length is 85 mm, providing sufficient reach for medium-depth internal features while controlling overhang. Is the tool suitable for CNC setups and quick insert changes? Yes; the TKB130TM is designed for CNC integration and uses indexable inserts for rapid replacement, reducing machine downtime. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
70mm Boring Tool CCMT 09T3 Insert Capacity 135mm Cutting Length 32mm Shank Diameter - Teknik Makina
Take advantage of the combination of a 32 mm solid shank, compatibility with CCMT 09T3 indexable inserts and a 90 mm max cutting diameter for stable, repeatable internal bores. Order the internal boring tool directly via Metav Werkzeuge or ask the Metav consultants for application advice. Internal boring tool TKB132TM – CCMT 09T3 interface, Ø90 mm max cutting diameter (Teknik Makina) The Internal boring tool delivers a robust solution for precision internal machining in CNC lathes and turning centres, engineered for compatibility with CCMT 09T3 indexable inserts. For CCMT 09T3 indexable inserts Max cutting diameter 90 mm 32 mm solid shank Overall length 195 mm Precision and stability for repeatable internal bores This boring bar is built to provide consistent bore quality across series production. The combination of a 32 mm shank and a substantial overall length of 195 mm reduces vibration and runout, which in turn supports tighter tolerances and improved surface finish. By using indexable inserts, the cutting edge can be renewed quickly without regrinding, so production downtime is reduced and process stability is maintained. The tool's design focuses on repeatability and mechanical rigidity, which are decisive factors when multiple identical bores are required in short cycle times. Efficient performance through insert compatibility Compatibility with CCMT 09T3 inserts ensures straightforward insert selection and fast changeover. Indexable inserts deliver predictable wear behaviour and a well-defined cutting geometry, which is advantageous for both roughing and finishing passes. With a maximum cutting diameter of 90 mm, the tool covers a wide range of internal turning tasks while standard insert formats keep tooling logistics simple. This arrangement improves machining efficiency and lowers unit cost by extending effective cutting time per insert. Easy integration into workshop workflows The tool's measurable data—90 mm max cutting diameter, 32 mm shank diameter, 135 mm cutting length on the shank and 195 mm overall length—supports quick planning for machine setup and clamping. These figures are supplied so that toolholders and spindle arrangements can be matched precisely, avoiding unnecessary trial-and-error during first-off trials. Tool handling and insert replacement follow familiar workshop procedures, enabling smooth integration into existing turning and CNC processes without demanding special fixtures. Built for professional environments and reliable supply Designed for industrial use, the tool balances rigidity with practical serviceability: indexable inserts allow prompt edge changes while the bar remains in service. This approach reduces scrap risk and optimises tool life management. The product is supplied through established distribution channels, guaranteeing availability and consistent quality control. The focus is on enabling firms to maintain production continuity with minimal tooling-related interruptions, supporting steady throughput on the shopfloor. For precision internal boring with a 32 mm solid shank and CCMT 09T3 compatibility, contact Metav Werkzeuge for tailored advice and supply via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: TKB132TM Manufacturer: Teknik Makina Product name: Internal boring tool Facts Max cutting diameter: 90 mm Shank diameter: 32 mm Shank cutting length: 135 mm Overall length: 195 mm Weight: 2.942 kg Special features Compatible inserts: CCMT 09T3 Indexable-insert boring application Suitable for internal turning operations FAQ What inserts does this boring tool accept? The internal boring tool accepts CCMT 09T3 indexable inserts; the toolholder and insert geometry are matched for straightforward replacement and stable cutting performance. Which machines is the tool intended for? This bar is designed for CNC lathes and turning centres where internal boring with indexable inserts is required; it is suitable for standard toolholders that accommodate a 32 mm shank. What is the maximum bore diameter achievable? The tool is specified for a maximum cutting diameter of 90 mm, which defines the upper range for internal machining tasks with this holder. How does insert replacement affect uptime? Using indexable inserts such as CCMT 09T3 significantly reduces downtimes because worn edges are exchanged rapidly, keeping the holder in service and shortening interruption times. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
70mm Cartridge for Boring Tool 70-90 CCMT 09T3 - Teknik Makina
Take advantage of a precise, OEM-compatible cartridge designed for seamless integration with CCMT 09T3 inserts; reliable manufacture by Teknik Makina ensures consistent performance and simple parts replacement — order directly via Metav Werkzeuge or consult Metav's specialists for compatibility advice. KR110TM cartridge — Cartridge for Boring Tool 70–90 CCMT 09T3 (Teknik Makina) The KR110TM cartridge is a dedicated insert cartridge for boring tools that accept CCMT 09T3 inserts, providing a tailored solution for accurate insert seating in turning and finishing operations Compatible with 70–90 CCMT 09T3 inserts Secure insert seating for stable cutting Produced by Teknik Makina Minimise downtime with exact compatibility The cartridge offers direct mechanical compatibility with tools accepting CCMT 09T3 inserts, which reduces setup complexity and helps maintain consistent cutting conditions. By using a component that matches the insert geometry, the risk of misalignment and premature wear is lowered, supporting a precision-oriented workflow. The design supports repeatable positioning of the cutting edge, so tool changes become a predictable, time-efficient task that preserves surface finish and dimensional accuracy. Streamlined changeover for reliable production Fitted into standard boring holders, the insert cartridge simplifies the process of replacing worn inserts and returning the tool to specification. The component acts as a stable interface between the holder and the insert, promoting secure fit and repeatability during high-volume or serial machining. For purchasing decisions, this translates into fewer interruptions and more consistent cycle times — a clear advantage for shops aiming for predictable throughput and quality control. A partner for precision and dependable supply Sourcing this cartridge through Metav Werkzeuge brings the advantage of a centralised supplier that acts as a quality filter for the European market. Metav’s network and warehouse in Emmerich support reliable availability and logistics, reinforcing workshop continuity. Combined with the manufacturer expertise of Teknik Makina, the cartridge supports a professional setup where reliability and consistent part performance matter most. For assured compatibility with CCMT 09T3 inserts and prompt supply from Metav Werkzeuge, contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or call +49 2822 7131930 to request ordering details and technical guidance Technical data Article number: KR110TM Description: Cartridge for Boring Tool 70–90 CCMT 09T3 Manufacturer: Teknik Makina Facts Suitable for boring tool range: 70–90 Insert type: CCMT 09T3 SKU: KR110TM Special features Compatibility with CCMT 09T3 inserts Application: boring tool cartridge Manufacturer: Teknik Cutting Tools / Teknik Makina FAQ What is the primary purpose of this cartridge? The cartridge serves as an insert carrier for boring tools compatible with CCMT 09T3 inserts, enabling stable insert seating and repeatable positioning during turning operations. Which insert type fits this cartridge? This cartridge is specified for CCMT 09T3 inserts and is intended for use in boring tools sized 70–90. Is the cartridge a genuine Teknik Makina component? Yes, the product is produced by Teknik Makina and listed under SKU KR110TM, ensuring manufacturer compatibility. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
70mm Cartridge for Boring Tool 70-90 CCMT 1204, Precision - Teknik Makina
Take advantage of the precise fit and clear compatibility of this spare part to maintain steady machining results and minimise shopfloor interruptions; order the cartridge directly via Metav Werkzeuge or consult the technical team for application advice. Cartridge for Boring Tool 70-90 CCMT 1204 — compatible spare part with OEM fit and clear specification The Cartridge for Boring Tool 70-90 CCMT 1204 is a replacement insert carrier intended for use with the specified boring-tool assembly; designed to provide consistent seating for CCMT 1204 indexable inserts in industrial turning and boring operations. Cartridge for CCMT 1204 insert geometry Designed for Boring Tool 70-90 Original Teknik Makina SKU KR116TM Consistent seating and measurable process stability A correctly matched cartridge ensures repeatable insert positioning and contributes directly to machining consistency. The cartridge for the Boring Tool 70-90 CCMT 1204 secures CCMT-style indexable inserts in their intended orientation, which reduces variation in tool overhang and cutting engagement. By maintaining a precision fit between holder and insert, the component supports predictable chip formation and surface finish, so process parameters remain stable across batches without frequent adjustment. Fast replacement to keep production moving As a spare part, this replacement cartridge simplifies the exchange routine when inserts or holders require service. A swift swap of the cartridge re-establishes the original tool geometry and helps to limit downtime associated with prolonged set-up or assembly realignment. Workplaces that keep critical holders and cartridges in stock benefit from shorter interruptions and easier maintenance planning, with the part identified under KR116TM for clear inventory control. Procurement clarity and workshop integration Sourcing original-fit components from a known supplier reduces procurement uncertainty and supports reliable operations. Metav’s role as a distribution partner offers a central supply route for workshop essentials, while the cartridge itself integrates into existing boring-tool setups that accept CCMT 1204 inserts. For buyers seeking compatibility and traceability, this spare part provides a straightforward replacement option that fits into established maintenance schedules and parts lists. For replacement components such as this Teknik Makina cartridge, contact Metav Werkzeuge for fast procurement and product advice via info@metav-werkzeuge.com or call +49 2822 7131930 to arrange delivery or technical clarification. Technical Data Article number: KR116TM Name: Cartridge for Boring Tool 70-90 CCMT 1204 Brand: Teknik Makina Suitable for: Boring Tool 70-90 CCMT 1204 Facts No measurable specifications provided Special features Compatibility with CCMT 1204 insert geometry Intended as a replacement cartridge for boring-tool assemblies OEM-identifying SKU KR116TM FAQ What insert type does this cartridge accept? The cartridge accepts CCMT 1204-style indexable inserts when used in the matching Boring Tool 70-90 assembly. Is this an original part from the manufacturer? Yes, the SKU KR116TM is listed for the Teknik Makina-compatible cartridge intended for the Boring Tool 70-90 CCMT 1204 configuration. Can the cartridge be used with other insert sizes? The cartridge is specified for CCMT 1204 insert geometry; compatibility with other sizes or shapes is not indicated for this item. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
75mm Boring Bar For CCMT 09T3 Inserts, 32mm Shank 135mm Cutting Length - Teknik Makina
Combine a large working length and a rigid 32 mm shank to achieve stable, accurate internal machining; the tool accepts CCMT 09T3 indexable inserts and supports cutting diameters up to 75 mm. Order the TKB126TM via Metav Werkzeuge or request application consultancy for tailored setup and insert recommendations. TKB126TM boring bar by Teknik Makina — 75 mm max cutting diameter, CCMT 09T3 compatible The TKB126TM is a compact boring bar designed for internal finishing and diametral enlargement using CCMT 09T3 indexable inserts, suitable for demanding workshop and light-production environments. Designed for CCMT 09T3 indexable inserts Maximum cutting diameter 75 mm 32 mm shank diameter for rigid clamping Total length 195 mm, 135 mm cutting length High-precision internal machining with measurable stability The TKB126TM is engineered as a boring bar that focuses on repeatable concentricity and surface finish. With a maximum cutting diameter of 75 mm the tool enables enlargement and finishing operations that demand tight tolerances. The combination of a solid tool geometry and the use of indexable inserts reduces set-up variability and shortens cycle times, delivering a measurable improvement in process stability and part quality. Rigid shank and compatible insert system for consistent toolholding A 32 mm shank gives the tool the rigidity required for internal machining where vibration and deflection affect results. The holder is built for CCMT 09T3 inserts, a widely available insert format that permits quick index changes and consistent edge geometry. This translates into lower rework rates and predictable tool life, since insert replacement restores cutting performance without lengthy regrind cycles. Efficient cutting length and workshop practicality With a cutting length of 135 mm and an overall length of 195 mm, the tool balances reach and stiffness to access bores while maintaining control over chip evacuation and coolant access where applicable. The indexable-insert concept keeps maintenance straightforward: damaged edges are remedied by rotating or replacing inserts, avoiding full-tool replacement and improving uptime in production or repair tasks. Supply reliability and partner advantages from Metav Procurement through Metav Werkzeuge adds operational benefits beyond the tool itself. Metav’s distribution ensures a local quality filter and dependable logistics from Emmerich, supported by a broad range of compatible inserts and tooling accessories. This relationship supports long-term process planning and reduces supplier complexity for workshops and small-scale manufacturers. For robust internal boring with guaranteed compatibility and local supply, contact Metav Werkzeuge for tailored advice on the TKB126TM and suitable CCMT 09T3 inserts from stock in Emmerich. Technical Data SKU: TKB126TM Manufacturer: Teknik Makina Compatible inserts: CCMT 09T3 Weight: 2.422 kg Facts Maximum cutting diameter: 75 mm Nominal diameter: 55 mm Shank diameter: 32 mm Total length: 195 mm Cutting length: 135 mm Design and features For indexable inserts CCMT 09T3 Indexable insert system Compact boring bar geometry Suitable for internal finishing operations FAQ What insert type does the tool accept? The TKB126TM accepts CCMT 09T3 indexable inserts; this insert format provides accessible edge geometry and simple indexing for quick edge renewal. What is the maximum cutting diameter? The tool supports a maximum cutting diameter of 75 mm, enabling enlargement and finishing within that range. How long is the effective cutting length? The effective cutting length is 135 mm, with a total tool length of 195 mm to balance reach and rigidity. Is the shank suitable for rigid clamping? Yes, the 32 mm shank diameter is designed for robust clamping to reduce deflection during internal machining. Can the tool be used for high-volume production? The indexable-insert concept of the TKB126TM lends itself to repeatable operations and reduced downtime; suitability for high-volume use depends on cutting parameters and insert grade choice. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
75mm Boring Bar With CCMT 09T3 Inserts 32mm Shank 85mm Cutting Length, 145mm Overall - Teknik Makina
Take advantage of the combination of precise machining capacity, robust shank rigidity and straightforward insert compatibility for reliable internal bores; order the boring tool directly via Metav Werkzeuge or ask our consultants if needed. Boring tool TKB124TM by Teknik Makina – 75 mm max cutting diameter, CCMT 09T3 compatible A boring tool for internal machining, designed to accept CCMT 09T3 indexable inserts and to perform medium-sized bores with high stability Compatible with CCMT 09T3 inserts Max cutting diameter 75 mm 32 mm shank for rigid clamping 145 mm overall length, 85 mm cutting length Consistent bore quality through rigid design and measurable capacity The rigid construction of this tool delivers stable machining and predictable outcomes. With a 32 mm shank and a total length of 145 mm, the tool is engineered to reduce deflection under load, which improves repeatability and minimises rework. The specification of a 75 mm maximum cutting diameter provides a clear, measurable limit for planning operations and tooling strategies. For workshops seeking to standardise processes, the combination of defined dimensions and a heavy-duty build (weight 1.638 kg) reduces variability between setups and supports consistent part quality. Faster setup and lower tooling complexity with indexable inserts Compatibility with CCMT 09T3 indexable inserts simplifies tool management and shortens downtime during insert changes. Instead of resharpening solid tools, the replaceable insert system enables quick restoration of cutting performance and cost-efficient wear management. The 85 mm cutting length allows adequate reach while maintaining rigidity, so cycle times can be optimised without compromising surface finish. For production environments, this translates into fewer machine stops and predictable maintenance intervals, improving overall productivity. Clear compatibility and practical handling explained The tool accepts industry-standard indexable inserts, making integration into existing tooling pools straightforward. The specification sheet lists the shank diameter and cutting dimensions so clamping and toolholder selection can be planned in advance; the 32 mm shank is compatible with common rigid holders for secure mounting. The presence of a defined cutting length and maximum diameter avoids ambiguity when calculating overhang and cutting parameters. For operators unfamiliar with insert systems: an indexable insert is a replaceable cutting tip that locates precisely in the tool body, providing quick replacement and consistent geometry without regrinding. Operational benefits and workshop fit This cutter suits workshops that require a balance between reach and stiffness. The combination of a compact overall length and a substantial shank diameter supports both manual set-up and CNC environments. By standardising on a tool that accepts widely available CCMT inserts, stocking becomes simpler and spare-part logistics are reduced. The measured characteristics (cutting diameter, shank diameter, cutting length) support efficient process documentation and enable data-driven decisions when selecting feeds and speeds for different materials. For procurement and technical compatibility checks, contact Metav Werkzeuge for tailored advice and fast supply from Emmerich — Metav Werkzeuge provides reliable delivery and specialist support for TekniK Makina tools Technical data Article number: TKB124TM Manufacturer: Teknik Makina Name: Ausbohrwerkzeug SKU: TKB124TM Facts Max cutting diameter: 75 mm Shank diameter: 32 mm Cutting length: 85 mm Overall length: 145 mm Weight: 1.638 kg Special features Compatible inserts: CCMT 09T3 Designed for indexable insert machining Robust shank for reduced deflection FAQ What insert type does the tool use? The tool is compatible with CCMT 09T3 indexable inserts, which are widely available and designed for straightforward replacement. What is the maximum cutting diameter I can expect? The maximum cutting diameter specified for the tool is 75 mm, which should be used when planning clamping and overhang to ensure rigidity. Which shank diameter is required for mounting? The tool features a 32 mm shank, suitable for rigid clamping systems commonly used in workshop and CNC setups. How long is the cutting portion of the tool? The cutting length is 85 mm, providing sufficient reach while helping to maintain stiffness during internal machining. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
75mm Boring Tool CCMT 09T3 Insert Holder 32mm Shank 220mm Cutting Length, 280mm Overall - Teknik Makina
Take advantage of the combination of precision, secure clamping and straightforward insert replacement to keep internal boring operations efficient and reliable. Order the boring tool directly via Metav Werkzeuge or ask the consultants for application advice. Teknik Makina TKB128TM boring tool — 55 mm nominal diameter, compatible with CCMT 09T3 inserts The TKB128TM is a purpose-built external and internal boring solution for CNC turning centres, offering a compact footprint with a long cutting reach for medium-to-large bores. Nominal diameter 55 mm Max cutting diameter 75 mm Shank Ø 32 mm for secure clamping Compatible with CCMT 09T3 inserts Consistent bore quality through controlled geometry The TKB128TM is engineered for steady cutting performance and repeatable bore geometry. With a nominal diameter of 55 mm and a maximum indicated cutting diameter of 75 mm, the tool body maintains rigidity that reduces vibration and runout during machining. A replaceable insert system minimises downtime: standard CCMT 09T3 carbide inserts can be changed quickly, restoring cutting-edge condition without the need for full tool replacement. This supports tighter process control and predictable surface finishes, which in turn reduces scrap rates and rework. Robust shank and extended reach for complex setups A 32 mm shank provides secure clamping and improved torque transmission for demanding internal operations. The tool’s cutting length of 220 mm combined with an overall length of 280 mm delivers extended reach without compromising stability, allowing access to deeper bores from compact tool posts. The construction supports reliable chip evacuation when paired with appropriate insert geometry and coolant strategies, helping to keep cycle times consistent across repeated runs. The solid build is reflected in a mass of 3.745 kg, contributing to dynamic stability on the machine turret. Standardised inserts to simplify tooling logistics Compatibility with CCMT 09T3 insert geometry reduces procurement complexity and keeps stock levels manageable. Using a widely available indexable insert family enables efficient transitions between finishing and medium-depth cuts by changing grade or chipbreaker rather than entire tool assemblies. The replaceable-insert approach also supports easier cost allocation: wear is concentrated on inexpensive inserts while the tool body remains a long-term asset. This modularity supports a pragmatic balance between capital expenditure and ongoing tooling costs. Workshop integration and dependable supply chain The TKB128TM fits into established tooling ecosystems and is suitable for automated tool pre-setting workflows where repeatability is essential. Procurement via Metav Werkzeuge brings the added assurance of a dedicated European supply channel and a quality-filtered warehouse in Emmerich, ensuring consistent availability for production-critical items. For complex applications or specification checks, complementary technical information is readily available from the supplier to support process planning and minimise machine downtime. Contact Metav Werkzeuge today for stock status and technical consultation on the TKB128TM boring tool — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitability for specific machining tasks Technical data SKU: TKB128TM Manufacturer: Teknik Makina EClass: 21181208 Weight: 3.745 kg File IDs: 62de7e6333927e49dbf32755, 62de7eef0f56dbb4de4dbf60 Dimensions & core data Nominal diameter: 55 mm Max cutting diameter: 75 mm Shank diameter: 32 mm Cutting (shank) length: 220 mm Overall length: 280 mm Mass: 3.745 kg Compatibility & features Compatible with CCMT 09T3 inserts Replaceable insert system Designed for internal boring on CNC turning centres UID: TKB128TM FAQ Which insert type is required for this boring tool? The tool uses CCMT 09T3 indexable inserts; the TKB128TM body accepts these standard inserts for efficient replacement and proven chip control. What are the key dimensions to consider when planning a setup? Nominal diameter 55 mm, maximum cutting diameter 75 mm, shank Ø 32 mm, cutting reach 220 mm and overall length 280 mm are the primary figures for fixture and turret clearances. Is the TKB128TM suitable for CNC internal boring operations? Yes — the TKB128TM boring bar is intended for internal boring on CNC turning centres, offering extended reach and secure clamping for stable bore production. How does insert replacement affect downtime? The replaceable CCMT 09T3 inserts allow quick tool restoration; worn inserts can be changed without removing the tool body, reducing maintenance time and preserving production throughput. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
80mm Boring Tool For Fine Finishing 0.01mm Resolution, 32mm Shank 145mm Overall - Teknik Makina
Take advantage of the combination of high-precision finishing, stable shank design and simple insert compatibility for reliable cycle times and reduced rework; order directly via Metav Werkzeuge or request tailored technical advice from our consultants. Boring Tool for Fine Finishing (THKB144TM) — 65 mm diameter, CCMT 09T3 compatible A boring tool for fine finishing engineered for precise turning and bore-honing tasks in industrial lathe applications. Fine finishing tolerance 0.01 mm Accepts CCMT 09T3 indexable inserts 65 mm cutting diameter, 85 mm cutting length Robust 32 mm shank, 1.9 kg weight Accurate finishing that reduces rework The THKB144TM is designed to deliver a repeatable surface finish with a nominal fine-machining capability of 0.01 mm, ensuring tight tolerances on critical bores. This level of control reduces secondary operations and scrap rates, which translates into measurable savings on labour and material. The precision geometry of the holder maintains a consistent tool-to-workpiece relationship, so the finishing pass achieves the intended dimensional result without excessive adjustment. Streamlined tooling thanks to standard inserts Compatibility with CCMT 09T3 indexable inserts simplifies inventory and changeover procedures. Using a widely available insert type means fewer specialised spares and faster recovery from tool wear. The tool’s cutting arrangement accommodates a 65 mm working diameter while supporting a maximum cutting diameter of 80 mm, enabling flexibility across small to mid-size boring tasks. Clear insert seating and secure clamping ensure stable cutting conditions and repeatable insert positioning. Rigidity and stability for improved productivity A 32 mm shank and a total length of 145 mm provide the necessary rigidity to suppress chatter during finishing passes. With a cutting length of 85 mm and a mass of 1.9 kg, this holder balances reach with stiffness so that vibration is minimised and surface integrity is preserved. The result is a reduction in cycle-time variability and fewer rejects caused by poor surface quality, supporting a more predictable production output. Practical advantages on the shop floor Designed for integration into CNC turning centres and lathes, this boring holder supports operators and programmers who require consistent outcomes from finishing operations. The tool reduces setup iterations and shortens inspection feedback loops by producing reliably finished bores in fewer passes. Wherever tight bores and repeated accuracy are required, this solution contributes to a smoother workflow and more efficient downstream assembly. For specific machining recommendations or integration support for the Teknik Cutting Tools THKB144TM boring tool, contact Metav Werkzeuge by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 for prompt, expert assistance. Technical Data Article number: THKB144TM Product: Boring tool for fine finishing Manufacturer: Teknik Makina Files: 62de7e64bd24461b3d5f7a36, 62de7ef0bd24461b3d5f7a88 Specifications Fine machining capability: 0.01 mm Maximum cutting diameter: 80 mm Nominal cutting diameter: 65 mm Total length: 145 mm Shank diameter: 32 mm Cutting length (shank to tip): 85 mm Weight: 1.9 kg Features & compatibility For CCMT 09T3 indexable inserts Designed for fine finishing operations Suitable for CNC turning and boring applications FAQ What insert type does this boring tool use? The boring tool accepts CCMT 09T3 indexable inserts; the THKB144TM is configured for these standard finishing inserts to simplify tooling management. What diameter range can be machined with this tool? Maximum cutting diameter is 80 mm, with a nominal working diameter shown as 65 mm, giving flexibility across common finishing bore sizes on the THKB144TM. How precise is the finish that can be achieved? The tool is specified for fine machining to around 0.01 mm, enabling the THKB144TM to produce tight-tolerance bores suitable for precision assemblies. Which machines is the tool intended for? The holder is intended for use in CNC lathes and turning centres where consistent finishing performance and stability are required; the THKB144TM integrates into standard tooling setups for these platforms. What are the shank dimensions and overall size? Shank diameter is 32 mm, total length 145 mm, cutting length 85 mm, and mass 1.9 kg, as specified for the THKB144TM to ensure rigidity and reach for finishing tasks. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
80mm Kartusche 80-130mm For Boring Tool, T15 Torx, M3.5x8.5 Screw - Teknik Makina
Combine the adjustable 80–130 mm clamping range with proven compatibility for CCMT 09T3 inserts and secure Torx fastening to streamline internal turning operations; order the cartridge directly via Metav Werkzeuge or consult our advisers for application support. Cartridge 80-130mm for Boring Tool (THB09TM) — Teknik Makina, compatible with CCMT 09T3 The Cartridge 80-130mm for Boring Tool is a precision mounting component for internal boring and turning applications, engineered to deliver consistent seating and repeatable results in production and workshop environments Adjustable 80–130 mm diameter range Compatible with CCMT 09T3 inserts Torx T15 fastening, M3.5x8.5 screw Consistent internal machining through a wide adjustable range The mounting unit offers an adjustable 80–130 mm clamping range that removes the need for frequent holder swaps on varied bore diameters. This flexibility shortens set-up times and supports a steady production flow by allowing one holder to cover multiple shaft sizes. The design emphasises precision and repeatability: controlled clamping and accurate insert positioning reduce radial runout and the risk of rework. For workshops aiming to optimise throughput, the cartridge acts as a reliable element within a modular boring system. Secure fastening and simple serviceability for less downtime Fastening is achieved via a Torx T15 drive and a M3.5x8.5 screw, providing a robust fastening method that resists loosening under cutting loads. The clear screw specification ensures compatible spares and straightforward maintenance routines. The insert pocket accepts standard brazed and indexable tools, so insert changes are quick and toolholding integrity is maintained. Reduced maintenance complexity translates directly into lower process interruptions and predictable toollife management in everyday shop-floor use. Compatible insert system that simplifies tooling logistics Designed for use with CCMT 09T3 indexable inserts, the holder minimises inventory pressure by standardising on a widely available insert format; this compatibility supports lean stocking and straightforward replacement cycles. The cartridge is intended for integration into a boring tool set, enabling modular upgrades without complete holder replacement. Built under Teknik Makina manufacturing guidelines, the component balances practical workshop demands with engineering robustness, helping maintain consistent surface finish and dimensional control in internal turning tasks For application advice or to secure the Cartridge 80-130mm from Teknik Makina (SKU THB09TM), contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or +49 2822 7131930 for tailored support and rapid supply Technical data Article number / SKU: THB09TM Manufacturer: Teknik Makina Designation (EN): Cartridge 80-130mm for Boring Tool eClass: 21041590 Specifications Clamping range: 80–130 mm Torx key: T15 Torx screw: M3.5x8.5 Compatible inserts: CCMT 09T3 Special features For boring tool set Insert compatibility with CCMT 09T3 Robust Torx T15 fastening Files: 62de7e64a9cff922f4703d2f, 62de7ef033927e49dbf32799 FAQ Which insert type fits the cartridge? The cartridge is compatible with CCMT 09T3 indexable inserts and is designed to accept that insert format for stable internal turning. What clamping range does the holder support? The clamping range is 80–130 mm, allowing one mounting unit to service a range of bore diameters in a boring tool set. What fastening hardware is specified? Fastening uses a Torx T15 drive and a M3.5x8.5 screw to ensure secure assembly and reliable resistance to cutting forces. Is this component suitable for modular boring systems? Yes, the cartridge is intended for integration into modular boring tool sets and reduces the need for multiple dedicated holders. How is the product identified for ordering? Order reference is THB09TM, listed under Teknik Makina as the Cartridge 80-130mm for Boring Tool. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
8mm Boring Tool Set For CCMT 0602 Inserts, With Extension And Torx Screws - Teknik Makina
Take advantage of a modular solution that combines compatibility with CCMT 0602 inserts, a robust modular design and ready-to-fit accessories for uninterrupted turning operations; order the set directly via Metav Werkzeuge or ask the consultants if needed Boring Tool Set THB01TM (Ausdrehwerkzeug Satz) – Modular external boring set for CCMT 0602, for roughing and finishing by Teknik Makina The Boring Tool Set THB01TM is a modular external boring system designed for both preliminary and finish turning; it pairs CCMT 0602 indexable inserts with a body and plug modules for quick diameter changes and efficient workshop integration CCMT 0602 compatible inserts Incl. extension and 2x Torx screws Modular body with THB03TM–THB09TM modules Robust set weight 3.1 kg for demanding work Greater throughput from a modular indexable system The THB01TM set is built around the CCMT 0602 insert standard and a modular holder architecture that reduces changeover time and increases machine uptime. By combining indexable carbide inserts with dedicated plug modules, the system enables fast adjustment of overhang and cutting radius without complex regrinding. For production environments this means fewer tool changes, a more predictable process window and measurable gains in machining efficiency. The modular construction also simplifies inventory management: one base holder with a series of modules covers a wide diameter range while maintaining stable cutting geometry. Ready-to-fit accessories that reduce setup time The kit includes a dedicated extension, two fastening screws and Torx keys T8 and T15, supplied to ensure secure assembly and repeatable clamping. This combination removes the need for immediate retrofit purchases and allows operators to mount the tool and begin machining with minimal auxiliary equipment. The set content—body and plug modules THB03TM–THB09TM—is arranged to support stepwise diameter adjustments. Clear mechanical seating and standardised fastening minimise wobble and promote consistent insert seating, contributing to longer effective tool life and a reliable surface finish. Optimised for roughing and finishing with long stand time Designed for both pre-machining and final passes, the tool set supports a stable cutting process that balances material removal and surface quality. The holder geometry ensures controlled chip guidance when paired with appropriate CCMT grades, which in turn helps to extend stand time under varying cutting conditions. For workshops aiming to combine productivity with repeatable part quality, this tool set reduces the need for frequent rework and supports predictable cycle times when used in lathes and turning centres. Integration into workshop workflows and professional support The mechanical simplicity of the modular concept eases commissioning and maintenance: familiar Torx fastenings and the supplied extension mean less time at the workbench and more time cutting. Metav's procurement and logistics from Emmerich provide a practical advantage for European shops seeking dependable supply and a quality filter across the product range. For complex job requirements or to confirm suitability for a specific turning task, Metav's consultants are available to advise on the best module combination and recommended insert grades. Contact Metav Werkzeuge for tailored advice on the Teknik Makina THB01TM modular boring set and secure efficient turning operations from Emmerich stock Technical data SKU: THB01TM Manufacturer: Teknik Makina Article name: Ausdrehwerkzeug Satz Wendeplatten CCMT 0602 Set contents: Body and plug modules THB03TM–THB09TM Included accessories: Extension and 2x Torx screws Numbers / core technical data Weight: 3.1 kg Pieces per set: 8 Special features / design Compatible with CCMT 0602 inserts Modular body with THB03TM–THB09TM modules For roughing and finishing operations Torx keys: T8 and T15 Ready-to-fit extension and fastening screws FAQ Which inserts are compatible with this set? The THB01TM boring tool set is compatible with CCMT 0602 indexable inserts; the geometry and clamping support standard CCMT grades for finishing and general turning. What exactly is included in the set? The set contains the main body and plug modules THB03TM–THB09TM, plus an extension and two Torx fastening screws for immediate assembly and use. How many items are in one set and what is the weight? One set comprises 8 pieces and has a total weight of 3.1 kg, suitable for stable handling and transport. Is the set suitable for both roughing and finishing operations? Yes, the modular holder design and CCMT insert compatibility make the THB01TM suitable for both preliminary material removal and final finishing passes when paired with the appropriate insert grades. Which Torx keys and screws are supplied? The delivery includes fastening screws and Torx keys T8 and T15 for secure clamping of the inserts and modules. Manufacturer: Teknik Cutting Tools; Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
90-130mm Cartridge for Boring Tool CCMT 09T3 - Teknik Makina
Benefit from a precise fit, straightforward maintenance and assured compatibility with the 90–130 CCMT 09T3 boring tool; the cartridge reduces downtime and supports consistent machining results. Order the replacement cartridge directly via Metav Werkzeuge or consult its specialists for supply and compatibility advice. Cartridge KR112TM — Cartridge for Boring Tool 90–130 CCMT 09T3 by Teknik Makina The Cartridge KR112TM is a replacement cartridge for the boring tool 90–130 CCMT 09T3, intended for fast insert changes and reliable clamping in workshop and production settings *Precision fit for 90–130 CCMT 09T3 *Durable construction by Teknik Makina *Easy-to-replace cartridge design Reduce set-up time with a quick-change cartridge The Cartridge KR112TM is designed to speed tool changes through a quick change interface that keeps set-up interruptions minimal. By holding the CCMT 09T3 insert securely, the cartridge enables rapid replacement of worn edges without full tool reassembly, which translates into measurable reductions in downtime and more efficient shift planning. For production environments where machine availability matters, the simplified exchange procedure supports higher output without compromising process control. Maintain machining accuracy through a precision fit A stable clamping solution delivers repeatable results: the cartridge’s precision fit and firm insert seating reduce micro-movement under cut, improving repeatability and surface finish consistency. Less vibration and a steady cutting edge position mean fewer scrapped parts and greater predictability for tolerance-critical operations. Even where operators have limited experience, a well-engineered cartridge supports consistent machining quality across batches. Ensure compatibility and straightforward inventory control Specifically matched to the 90–130 boring tool range for CCMT 09T3 inserts, the cartridge provides clear interchangeability for planned maintenance and spare-part stocking. Sourced from Teknik Makina, the component is intended as a reliable replacement part to maintain tool performance and uptime. The design supports efficient servicing routines and reduces the complexity of spare-part lists, helping workshops streamline procurement and keep machines running. For assured compatibility and prompt supply of the Teknik Makina Cartridge KR112TM for the 90–130 CCMT 09T3 boring tool, contact Metav Werkzeuge — specialists are available at info@metav-werkzeuge.com or +49 2822 7131930 to advise on stock and delivery Technical Data Article number: KR112TM Manufacturer: Teknik Makina Product name: Cartridge Facts Suitable for: Boring Tool 90–130 CCMT 09T3 SKU / UID: KR112TM Special features Replacement cartridge for CCMT 09T3 insert holders Compatible with 90–130 mm boring tool range FAQ What machines is this cartridge compatible with? The cartridge is compatible with the boring tool 90–130 CCMT 09T3 and is intended for use with holders that accept CCMT 09T3 inserts. Can CCMT 09T3 inserts be mounted in this cartridge? Yes — the Cartridge KR112TM is designed to accept CCMT 09T3 inserts and to provide secure clamping for standard insert geometries. Is this cartridge a direct replacement part from Teknik Makina? The Cartridge KR112TM is supplied for the 90–130 CCMT 09T3 boring tool and is a replacement component from Teknik Makina for users requiring matching fit and function. How does the cartridge affect maintenance and spare parts management? Using the cartridge streamlines maintenance by enabling quick insert swaps and reduces inventory complexity, as the KR112TM is a defined spare for the 90–130 CCMT 09T3 tool range. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com