Precision calipers for reliable industrial measurement
Precision calipers and their variants provide fast, repeatable outside, inside, depth and step measurements to ensure component conformity and process control on the shopfloor, combining mechanical robustness with digital data handling for traceable results. Designed for use in industrial quality assurance and manufacturing, these calipers serve applications from rough workshop environments to precision inspection, with options such as analogue vernier calipers for durable, battery‑free operation and digital calipers offering clear displays and data output to speed up quality workflows. Specialist formats, including workshop calipers with extended ranges and built‑in mounting calipers for machine or fixture monitoring, extend capability to long strokes and embedded measurement tasks, while bespoke models handle deep grooves, pipe wall thicknesses and three‑point or other complex geometries. The range emphasises highest accuracy and process integration, featuring high‑end touchscreen models with integrated microcomputers, wireless data transfer and Industry 4.0 compatibility to modernise measurement and quality data capture.
5000mm Digital Caliper Long Jaw 300mm Touchscreen Colour Wireless USB ISO 17025 Calibrated - Microtech Metrology
Take advantage of the combination of an extra‑long 5,000 mm measuring range, robust hand‑finished jaws and traceable ISO 17025 calibration for reproducible measurements on large components. Order the workshop caliper directly via Metav Werkzeuge or request technical advice from our consultants. Workshop caliper — Microtech Metrology digital caliper with 2.4″ colour touchscreen The Workshop caliper is an extra‑long digital caliper designed for large-format metrology up to 5,000 mm, combining a clear 2.4″ colour touchscreen with Wireless+USB data output for integration into quality workflows. Extra‑long measuring range up to 5,000 mm 2.4″ colour touchscreen for clear readings Wireless+USB data output for traceable logging ISO 17025 calibration and certificate included Measure large components with reproducible precision The extra‑long construction addresses measurements on large workpieces such as heavy housings, long shafts and pipes where profile stiffness and repeatability are critical. With a measuring range reaching 5,000 mm and hand‑finished jaws, the instrument keeps deflection and runout low across its length, so measurements remain comparable even on extended setups. Supplied fully calibrated to ISO 17025, the device is delivered with a traceable calibration certificate, supporting internal audits and a documented quality chain. Reliable numerical output for quality control and process data A resolution of 0.01 mm together with an indicated accuracy of 0.13 mm gives a clear balance between practical workshop requirements and measurable precision. The caliper’s measuring force 1–20 N helps standardise contact pressure to reduce operator‑induced variability, while the Wireless+USB output ensures measurement data can be exported directly to logging systems or SPC software for fast process control. The digital 2.4″ colour touchscreen streamlines reading and reduces transcription errors, improving throughput without compromising the traceability needed in production environments. Built to integrate with workshop routines and large assemblies Long jaw geometry (300 mm jaw length) and rugged construction make this instrument suitable for assembly fixtures and layout benches where reach and durability matter. The large format design is complemented by ergonomic controls and a responsive display for straightforward operation during repetitive checks. Integration into existing documentation routines is simplified by the multiple data interfaces, and the included ISO 17025 certificate removes the immediate need for separate initial calibration, shortening time to first measurement. For heavy‑duty metrology tasks where reproducibility and documented accuracy are required, this caliper is configured to fit directly into shopfloor and inspection workflows. Contact Metav Werkzeuge in Emmerich for a technical quotation or specification matching; email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss integration and delivery options. Technical data SKU: 141050256 GTIN: 4061905454493 Manufacturer: Microtech Metrology Digital display: Colour 2.4″ touchscreen Data output: Wireless+USB Digital: yes ISO 17025 calibration: included Core specifications Measurement range: 0–5,000 mm Resolution (reading): 0.01 mm Accuracy (indicated): 0.13 mm Jaw length: 300 mm Measuring force: 1–20 N Display size: 2.4 inches Features and special functions Hand‑finished jaws Extra‑long caliper for large components Wireless and USB data transfer Delivered with ISO 17025 calibration certificate Suitable for workshop and inspection‑room workflows FAQ What is the maximum measuring range of this caliper? The caliper measures up to 5,000 mm and is designed as an extra‑long instrument for large components; the Microtech Metrology workshop caliper (SKU 141050256) covers this full range. Is the instrument supplied calibrated? Yes, the device is delivered fully calibrated to ISO 17025 with an accompanying calibration certificate for immediate use in traceable quality processes. Which data interfaces are available for integration? Measurement data can be exported via Wireless+USB interfaces to logging or SPC systems for direct documentation of readings. What resolution and accuracy can be expected? The instrument provides a reading resolution of 0.01 mm with an indicated accuracy of 0.13 mm, suited to workshop and inspection tasks where long‑range reproducibility is required. Are the measuring jaws suitable for long‑term shop use? The caliper features hand‑finished jaws and robust construction to withstand repetitive measurements on larger assemblies while maintaining repeatability. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
5000mm Precision In-Built Digital Caliper Colour 2.4" Touchscreen, IP54 Wireless USB - Microtech Metrology
Take advantage of the combination of an extra‑long 5,000 mm measuring range, robust IP54 protection and modern data transfer via Wireless and USB for reliable large‑part measurement. Order the instrument directly via Metav Werkzeuge or consult our advisors for system integration and delivery options. Built-in digital caliper – Extra‑long 5,000 mm range, 2.4" colour touchscreen (Microtech Metrology) A built-in digital caliper for industrial measurement of large components and fixtures, designed for permanent installation where long, repeatable linear measurement is required. Extra‑long 5,000 mm measuring range Colour 2.4" touchscreen display Wireless and USB data output IP54 dust and splash protection Consistent large‑part measurement that reduces set‑ups The instrument’s extra‑long 5,000 mm range streamlines measurement of large assemblies and long shafts, reducing the need for repeated re‑fixturing. Installed directly into a machine bed or fixture, the device maintains a constant reference line which improves repeatability across multi‑point checks. Built for heavy fabrication and segmental measurement tasks, the system’s form factor and mounting provisions maintain profile stiffness so that results remain reproducible over long runs. Traceable data flow for modern quality processes Equipped with Wireless and USB data outputs and a 2.4" colour touchscreen, the device supports fast documentation and transfer of measurement records into inspection software or SPC systems. The display resolution is 0.01 mm, while the practical measurement accuracy 0.11 mm reflects the instrument’s suitability for dimensional control of large parts rather than micrometre‑class bench work. This combination enables quicker decision loops on the shop floor and easier archiving of measurement results for audit trails. Built to withstand workshop conditions and simplify operation With an IP54 protection rating and a ruggedised construction, the instrument tolerates workshop dust and occasional splashes while remaining serviceable with minimal maintenance. The touchscreen and clear numeric readout reduce reading errors and speed up routine inspections, while the fixed installation removes the handling variation associated with portable gauges. Operators benefit from a device that is easy to read, robust in daily use and compatible with existing data collection routines. Designed for industrial integration and reliable supply Classed as Extra‑Long measurement equipment, this solution is aimed at heavy‑duty applications such as pipe, vessel and large housing inspection where measurement length is the limiting factor. Delivered by Metav Werkzeuge with their established logistics and quality‑filter approach for the European market, the instrument fits into a modular inspection workflow and supports consolidated supplier management for workshops and toolrooms seeking dependable delivery and product continuity. Contact Metav Werkzeuge for tailored advice on integrating Microtech Metrology built-in digital calipers with a 5,000 mm range into your measurement setup — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data SKU: 142550140 GTIN: 4061905458989 Manufacturer: Microtech Metrology ECLASS: 21170344 Facts Measuring range: 0–5,000 mm Resolution: 0.01 mm Accuracy: 0.11 mm IP rating: IP54 Special features Colour 2.4" touchscreen Wireless and USB data output Digital instrument Category: Digital calipers FAQ What applications suit this extra‑long built‑in caliper best? The built‑in digital caliper from Microtech Metrology (SKU 142550140) is intended for large‑component inspection such as pipes, housings and long shafts where a fixed, repeatable reference and a 5,000 mm measuring range are required. How is measurement data exported from the device? Measurement values can be transmitted via Wireless or via USB for direct capture into inspection software or SPC systems using the caliper’s standard interfaces. What level of precision can be expected for long‑range checks? The instrument offers a display resolution of 0.01 mm with a practical accuracy of 0.11 mm, suitable for dimensional control tasks on large parts where range and repeatability are priorities. Is the caliper protected against workshop conditions? Yes — the device has an IP54 rating, providing protection against dust ingress and water splashes typical in metalworking environments. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
500mm Brake Drum Caliper 150mm Jaws Stainless Steel For Inside And Outside Measurement, Supplied In Case - Metav IndustryLine
Take advantage of a large-range, corrosion‑resistant caliper that combines practical reach and robust vernier accuracy to keep workshop inspections efficient. The stainless steel construction and precise vernier graduations ensure reliable inside and outside measurements of brake drums and similar components; order directly via Metav Werkzeuge or contact our consultants for application advice. Brake-drum Caliper M201.185 (500×150 mm, stainless steel) — Metav IndustryLine analogue precision caliper for inside and outside measurement A Brake-drum Caliper M201.185 designed for measuring brake drums and large components with sturdy stainless steel construction and vernier accuracy for repeatable workshop control Stainless steel construction for corrosion resistance Measuring range: 0–500 mm external, 50–550 mm internal Vernier: 0.05 mm external, 0.1 mm internal resolution Locking screw for stable and repeatable readings Robust design for demanding workshop measurements The caliper's stainless steel body provides long-term resistance to workshop conditions while keeping the measuring surfaces stable. Built as an analogue vernier caliper, it delivers a reliable balance between mechanical durability and straightforward operation. The robust frame reduces flex over its 500 mm external span, making it suitable where repeatability across larger components is essential. The included locking screw secures the slider for consistent readings during transfer and comparison, which shortens inspection cycles and reduces rework. Precision where it matters: vernier layout and accuracy Equipped with a traditional vernier scale, the tool offers 0.05 mm resolution on external measurements and 0.1 mm resolution for internal measurements, matching common workshop tolerances. The stated nominal accuracy of ±0.15 mm corresponds to a level of performance appropriate for heavy‑duty measurements such as brake drums, housings and cast components where an analogue instrument is preferred. The vernier arrangement is easy to read after a short familiarisation, which supports faster throughput in repetitive quality checks. Practical range for larger components Classified at the threshold of the large‑range category, this caliper covers external measurements up to 500 mm and internal spans from 50 to 550 mm, bridging bench work and larger subassemblies. That reach makes it a pragmatic choice for vehicle service shops, maintenance departments and fixture checks where an extended jaw length (150 mm) is required to access deep bores or drum contours. The combination of reach and stiffness reduces the need for auxiliary gauges, simplifying measurement workflows. Workshop compatibility and everyday benefits As an analogue instrument, the caliper requires no batteries and offers immediate readiness for on‑the‑spot inspections. The stainless construction minimises corrosion risk, and the clear vernier graduations facilitate quick decisions at the bench. Together these attributes support a rational approach to quality control: faster inspections, fewer measurement steps and predictable results that integrate smoothly with existing test plans. Contact Metav Werkzeuge today for tailored advice on integrating the Metav IndustryLine Brake‑drum Caliper M201.185 into workshop workflows and to confirm availability from our Emmerich supply hub. Technical Data Article number: M201.185 GTIN: 4054469101002 eClass: 21170344 Customs tariff code: 90173000 Facts Measuring range external: 0–500 mm Measuring range internal: 50–550 mm Jaw length: 150 mm Vernier resolution: 0.05 mm (external), 0.1 mm (internal) Nominal accuracy: ±0.15 mm Analog instrument (vernier type) Special features Material: stainless steel (inox) Suitable for inside and outside measurement of brake drums and similar parts Locking screw for stable measurement transfer Designed for workshop and maintenance environments FAQ Is this caliper suitable for measuring brake drums and deep bores? Yes. The Brake‑drum Caliper M201.185 is designed for inside and outside measurement with a long jaw length and a measuring range that accommodates brake drums and comparable components. What resolution and accuracy can be expected from this analogue caliper? The instrument provides 0.05 mm resolution for external measurements and 0.1 mm resolution for internal measurements, with a nominal accuracy of ±0.15 mm, appropriate for heavy‑duty workshop checks. Does the caliper require batteries or electronic maintenance? No. Being an analogue vernier caliper, the Metav IndustryLine Brake‑drum Caliper M201.185 operates without batteries and is ready for immediate use after basic calibration verification. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
500mm Brake Drum Caliper 200mm Jaws Stainless Steel for Internal And External Measurement, 1/10mm Internal 1/20mm External, Supplied In Case - Metav IndustryLine
Take advantage of the combination of robust stainless steel construction, clear vernier graduations for internal and external measurements, and a locking screw for reproducible results. Order the caliper directly via Metav Werkzeuge or contact our consultants for application advice. Metav IndustryLine Brake Drum Caliper M201.186 — 500 mm range, stainless steel vernier A Metav IndustryLine Brake Drum Caliper M201.186 designed for accurate internal and external diameter measurement of brake drums and similar workshop components. 500 mm measuring range for large components Stainless steel construction resists corrosion Dual vernier for internal and external reading Reproducible precision for workshop routines This analogue vernier caliper combines a straightforward measuring principle with industrial robustness to support repetitive inspection tasks. The mechanical scale offers a clear dual reading—1/10 mm divisions for internal measurements and 1/20 mm divisions for external measurements—enabling fast comparability against tolerance limits. The specified accuracy of ±0.15 mm and the locking screw help to reduce operator variation and secure measurements while transferring parts or recording values, which in turn shortens inspection cycles and reduces rework. Range and handling tuned to brake-drum work With an external measuring capacity up to 500 mm and an internal measuring span listed as 50–550 mm, this caliper sits in the medium size class for workshop calipers, offering the best compromise between reach and stiffness for components such as brake drums, housings and medium-sized castings. The 200 mm jaw length provides stable contact surfaces for deeper grooves or recesses, so axial alignment is easier and measurement repeatability is improved compared with very short-jawed instruments. Durable materials and ergonomic operation Manufactured from stainless steel (inox), the instrument resists workshop grime and light corrosion, extending service life and reducing maintenance. The analogue design requires no batteries and is immediately serviceable at the bench. A robust frame and smooth sliding action, together with the locking screw, assist in single-handed operation and secure readings during transport. The overall concept is aimed at practical reliability rather than adding unnecessary electronic complexity, which benefits routine quality controls and maintenance checks. For tailored advice or to secure the M201.186 through Metav Werkzeuge — contact our consultants in Emmerich for fast, reliable supply and application guidance Technical Data SKU: M201.186 GTIN: 4054469101026 Tariff code: 90173000 Facts External measuring range: 0–500 mm Internal measuring range: 50–550 mm Jaw length: 200 mm Accuracy: ±0.15 mm Vernier divisions: 1/10 mm (internal), 1/20 mm (external) Special features Material: stainless steel (inox) Analog vernier caliper Locking screw for reproducible readings Suitable for brake drums and similar components Supplied in a protective case FAQ What measuring ranges does the caliper cover? The caliper covers an external range to 500 mm and an internal span of 50–550 mm, making it suitable for medium-sized components such as brake drums. How precise is the vernier reading on this instrument? The analogue vernier provides 1/10 mm divisions for internal measurements and 1/20 mm divisions for external measurements; the instrument's stated accuracy is ±0.15 mm. Is the caliper suitable for workshop use on brake drums? Yes, the M201.186 brake drum caliper is designed for workshop inspection of brake drums and similar parts, combining stainless steel durability with practical jaw geometry. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
500mm Caliper Measuring Jaw Adapter For 5.5mm Jaw Thickness - Metav IndustryLine
Take advantage of a compact, purpose-built accessory that converts standard caliper jaws into a specialised measuring interface: the adapter accepts jaw thicknesses up to 5.5 mm, fits calipers with a measuring range up to 500 mm and mounts on a Ø5 mm fitting for secure attachment. Order the adapter directly via Metav Werkzeuge or consult our specialists for application advice. Caliper jaw adapter (for calipers up to 500 mm) — Metav IndustryLine, Ø5 mounting, 5.5 mm jaw capacity Caliper jaw adapter (for calipers up to 500 mm) is a compact attachment that converts standard caliper jaws into a dedicated measuring interface for medium-range workshop tasks, ideal where quick adaptation is required without changing instruments Fits calipers up to 500 mm Accepts jaw thickness up to 5.5 mm Ø5 mm mounting bore for secure fit Lightweight 50 g for minimal load Consistent precision for medium-range measuring tasks This accessory is engineered as a precision caliper adapter for calipers with a maximum measuring range of 500 mm, placing it in the workshop's medium‑range category. By allowing a defined contact geometry on existing jaws, the adapter reduces variability introduced by improvised fixtures and supports repeatable measurements across production batches. The compact construction and 50 g mass keep the additional load negligible, preserving the instrument's handling and helping to avoid bending or offset errors that can occur with heavier retrofits. Straightforward compatibility and quick fitting The adapter secures onto the caliper jaw via a Ø5 mm mounting interface, a common workshop standard that ensures a tight, concentric fit on compatible jaws. Acceptance of jaw thicknesses up to 5.5 mm means the part suits many standard and robust jaw designs found in industrial and bench calipers. Its role as an attachment for measuring jaws simplifies conversion of an existing analogue instrument into a specialised gauge without the need for new callipers, saving procurement time and reducing downtime in the measuring process. Practical benefits for everyday workshop use Designed as a pragmatic accessory rather than a complete instrument, the adapter enhances workflow by enabling tailored contact forms for specific measurement tasks — for example, reaching into tight grooves or creating a repeatable stop for stepped measurements. The solution supports the shop-floor emphasis on efficiency: one adapted caliper can replace multiple specialised tools, lowering equipment complexity. Traceability and repeatability are improved when the same adapter is used consistently across checks, which is particularly valuable for batch control and fixture set‑ups. Built for durability and predictable handling Although compact, the adapter is manufactured to withstand routine workshop use while maintaining alignment and seat integrity on the caliper jaw. Its low mass minimises influence on the caliper's dynamics during measurement, and the defined mounting geometry reduces play once fitted. As an accessory that complements existing metrology equipment, it contributes to a more organised measurement routine and helps technicians focus on result quality rather than frequent tool changes. Contact Metav Werkzeuge for tailored advice and to obtain the Metav IndustryLine caliper jaw adapter (SKU M240.312) from our Emmerich quality centre Technical data SKU: M240.312 GTIN: 4054469159515 ECLASS: 21131720 Tariff number: 90178090 Weight: 0.05 kg Facts Measuring range compatibility: up to 500 mm Maximum jaw thickness accepted: 5.5 mm Mounting bore: Ø5 mm Mass: 0.05 kg (50 g) Special features Attachment for caliper measuring jaws Suited to analogue calipers Designed for medium-range calipers (up to 500 mm) Compact, lightweight accessory Enables defined contact geometry for repeatable measures FAQ Which calipers are compatible with this adapter? The adapter is compatible with calipers that accept an accessory on a Ø5 mm mounting and have jaw thicknesses up to 5.5 mm; it is intended for calipers with a measuring range up to 500 mm and is supplied as the Metav IndustryLine caliper jaw adapter (SKU M240.312). Can the adapter be used on digital calipers as well as analogue ones? Yes; while the design is intended for analogue calipers, the Metav IndustryLine adapter can be fitted to many digital models provided the jaw geometry and a Ø5 mm mounting are available. Does the adapter affect measurement accuracy? When fitted correctly, the adapter provides a consistent contact geometry that improves repeatability; the low mass (approximately 50 g) minimises influence on the caliper's handling and thus limits additional measurement error. What workshop tasks benefit most from this accessory? The adapter is particularly useful for stepped measurements, internal features accessed via modified jaws and repeat checks where a defined, repeatable contact is required; it adapts standard calipers for medium-range metrology tasks without needing a dedicated gauge. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
500mm Depth Caliper Wireless Digital Display Swiss Digit 11mm, IP67 - Microtech Metrology
Take advantage of robust wireless data transfer and an IP67-rated housing combined with a 0–500 mm measurement range and a clear Swiss Digit display for reliable depth measurements in production and workshop environments. Order the depth caliper directly via Metav Werkzeuge or ask our consultants if needed. Depth Caliper — Digital Depth Gauge, Wireless, IP67 Depth Caliper is a wireless digital depth gauge designed for medium-range workshop and production measurements up to 500 mm, offering clear Swiss Digit readout and durable IP67 protection. Wireless data output for digital logging IP67 protection against dust and immersion 0–500 mm medium-range capacity Swiss Digit display, 11 mm high Precision that keeps production moving The digital depth gauge delivers repeatable results with a resolution of 0.01 mm and a stated accuracy of ±0.04 mm, which makes it suitable for many machining and inspection tasks where depth tolerance is critical. Classified as a medium-range instrument (300–500 mm), the instrument balances reach and rigidity so that measurements across larger components remain reproducible. The measurement certainty supports rational production decisions by reducing rework and minimising scrap rates. Built to integrate with digital workflows Equipped with a wireless data output, the instrument simplifies capture of measurement results for statistical process control and documentation without the hassle of cables. The Swiss Digit display (11 mm height) ensures readings remain legible on busy shop floors, improving throughput by reducing read-and-record time. With an IP67 rating, the unit resists dust ingress and temporary immersion, therefore offering dependable operation in harsher shop conditions and lowering downtime caused by environmental contaminants. Practical handling and typical applications As a dedicated depth gauge, this digital caliper performs depth measurements on pockets, bores and steps where precise axial measurement is required. Its 0–500 mm span covers fixtures, housings and medium-sized components commonly found in toolmaking, jigs and fixture assembly. Compact operation and a straightforward digital interface permit efficient use at inspection benches and inline quality checks, making it a pragmatic choice for workshops seeking measurable productivity gains. Contact Metav Werkzeuge for tailored advice on integrating the Microtech Metrology digital depth caliper into production; phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: 1432030504 GTIN: 4061905459894 Manufacturer: Microtech Metrology Product type: Digital depth caliper Data output: Wireless Facts Measurement range: 0–500 mm Resolution: 0.01 mm Accuracy: ±0.04 mm Display height: 11 mm Protection class: IP67 Special features Wireless data output Swiss Digit display Digital measuring device Medium-range (300–500 mm) classification FAQ Is this depth gauge suitable for workshop use? The Microtech Metrology digital depth caliper (SKU 1432030504) is designed for workshop and production environments, offering a robust IP67 rating and a 0–500 mm range suited to medium-sized components. What measurement precision can be expected? The instrument provides a resolution of 0.01 mm with a stated accuracy of ±0.04 mm, allowing controlled depth measurements for many machining and inspection tasks. How are readings transferred to data systems? Measurement values are sent via the device's wireless data output, enabling integration into data logging and quality control systems without wired connections. Is the display easy to read under workshop lighting? Yes, the device uses a Swiss Digit display with an 11 mm character height, designed for good legibility in busy shop-floor conditions. For which kinds of depth measurements is this caliper intended? This digital depth caliper is optimised for measuring depths of pockets, bores and steps on medium-sized components up to 500 mm, suitable for toolmaking, fixture work and production checks. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
500mm Depth Caliper With Interchangeable Probes, Digital Readout Mm/Inch, ABS, ISO 17025 Calibration, Plastic Case - Filetta
Taking advantage of reliable digital readout, interchangeable probes and a robust transport case supports consistent depth measurement across workshop and fixture tasks. Order the Filetta depth caliper directly via Metav Werkzeuge or consult our specialists for application advice. Filetta Depth Caliper MS910.498 — Digital depth caliper with interchangeable probes, 0–500 mm range The Depth Caliper MS910.498 is a digital depth measuring instrument designed for medium‑range workshop applications such as fixtures, moulds and assembly checks. Digital mm/inch display with ABS/INC Interchangeable probes for diverse recesses 0–500 mm range for medium workshop tasks Supplied in transport case for safe handling Consistent medium-range depth measurement for workshop use The Filetta MS910.498 places medium-range capability at the centre of everyday metrology needs: the 0–500 mm range covers typical machine‑shop and toolroom tasks where reach and stiffness must be balanced. With a clear digital architecture and mechanical design tuned for repeatability, the caliper delivers reliable depth results on components, housings and cavities. The measured values are presented in a straightforward format that supports quality control protocols and reduces rework time. Adaptable probe set for awkward profiles and recesses Interchangeable probes expand the instrument’s practical scope: a hook, double hook, disc probe Ø30 mm and measuring pin Ø3 mm allow measurement of narrow slots, stepped depths, large bore depths and fine grooves respectively. This modular contact system saves time otherwise spent changing tools or adapting fixtures and ensures correct contact geometry for reproducible seating — especially useful when measuring components with mixed detail sizes. Clear digital reading and measurement reliability The electronic system provides mm/inch switching plus ABS/INC modes and Reset/Preset for process control. Key metrological data are 0.01 mm resolution and ±0.03 mm accuracy, which together define the instrument’s capability to resolve fine increments while maintaining industrial‑grade tolerance. The combination of high resolution and stable reading behaviour supports confident decision‑making during inspection and assembly operations. Workshop-ready handling and secure transport A locking screw secures the slider for stable readings and safe handling during transfer between workstations. Power is provided by a single V357 battery, minimising downtime with a common cell type. The depth caliper is supplied in a transport case, protecting the measuring faces and probes in transit and storage. These practical details contribute to dependable uptime and a lower risk of damage in daily workshop use. Contact Metav Werkzeuge to discuss the Filetta MS910.498 and arrange supply from our Emmerich stock — call +49 2822 7131930 or email info@metav-werkzeuge.com to request tailored measurement advice Technical data Article number: MS910.498 Manufacturer: Filetta Product type: Depth caliper Digital display: mm/inch, ABS/INC, Reset/Preset Battery: 1x V357 Facts Measuring range: 0–500 mm Resolution: 0.01 mm Accuracy: ±0.03 mm Display increment: 0.01 mm Special features Interchangeable probes: hook; double hook; disc probe Ø30 mm; measuring pin Ø3 mm Locking screw for stable readings Supplied in transport case for safe handling Digital unit suitable for workshop and inspection use FAQ What measuring range does this caliper cover? The Filetta depth caliper MS910.498 covers a 0–500 mm measuring range, placing it in the medium‑range class for workshop and fixture measurements. Which probe types are included and what are they for? The instrument includes a hook, a double hook, a disc probe (Ø30 mm) and a measuring pin (Ø3 mm); these probes adapt the caliper to measure slots, stepped depths, broad recesses and fine grooves respectively. How precise is the digital readout? The caliper provides a 0.01 mm resolution with an overall stated accuracy of ±0.03 mm, suitable for standard machine‑shop quality control tasks. Is the caliper ready for transport and workshop use? Yes; the device is supplied in a transport case and features a locking screw to secure the slider during movement and storage. What power source does the caliper use? The display is powered by a single V357 battery, which is commonly available and easy to replace. Manufacturer / Responsible: Schut Geometrische Meettechniek bv; Duinkerkenstraat 21; 9723 BN Groningen; The Netherlands; +31 50 5877877; schutnl@schut.com
500mm Depth Gauge Digital With Nail Probe, Swiss Digit Display 11mm, IP67 - Microtech Metrology
Take advantage of robust IP67 protection, a 0–500 mm measuring range and a high-contrast Swiss Digit display to speed up depth measurement tasks while reducing rework; order the depth caliper directly via Metav Werkzeuge or consult our specialists for application advice. Depth Caliper — Digital depth measuring instrument with Swiss Digit display and IP67 protection (Microtech Metrology) The Depth Caliper is a digital measuring instrument designed for medium-range depth measurements in workshop and production environments, offering clear readout and robust environmental protection. Robust IP67 protection for wet and dusty environments 0–500 mm measuring range for medium applications 0.01 mm resolution, 0.04 mm accuracy Swiss Digit display, 11 mm height for clear reading Faster, more reliable depth measurements for production The digital measuring instrument features a Swiss Digit display with an 11 mm character height, providing highly legible figures that reduce interpretation errors on the shop floor. With a resolution of 0.01 mm and a stated accuracy of ±0.04 mm, the instrument supports routine quality checks and reduces the need for repeat measurements. Clear digital output speeds up inspection steps and contributes directly to improved throughput and lower scrap rates. Built for medium-range workshop and toolroom tasks Classified as a medium-range caliper (measuring capacity up to 500 mm), this device balances reach and rigidity for components such as fixtures, housings and larger assemblies. Its design suits machine shops, jigs and mould construction where extended reach meets the need for manageable handling. The combination of reach and stability helps keep measurements reproducible across multiple operators and setups. Protected operation and dependable performance in harsh conditions The unit’s IP67 ingress protection rating ensures dust-tight sealing and immersion resistance, which allows reliable use in harsher workshop environments. The sealed electronics and robust construction limit downtime due to contamination and maintain measurement integrity over longer service intervals. This durability delivers practical savings in maintenance and replacement costs, supporting continuous production. Clear technical advantages that support decision-making The instrument provides digital readout ergonomics that simplify logging and comparison of depth values during inspection routines. The large-display readout and consistent numeric performance make the caliper an effective tool for standardised measuring procedures and quality control documentation. Its specifications align with typical workshop needs where speed, repeatability and clarity are the primary drivers for selecting inspection tools. Speak to Metav Werkzeuge for tailored advice on using Microtech Metrology depth calipers with IP67 protection and a 0–500 mm measuring range; consultants in Emmerich are available by e‑mail at info@metav-werkzeuge.com or by phone at +49 2822 7131930 to discuss suitability for specific applications Technical Data Article number: 1432030503 GTIN: 4061905459818 Manufacturer: Microtech Metrology ECLASS: 21170344 Digital display: Swiss Digit, 11 mm Protection class: IP67 Facts Measuring range: 0–500 mm Resolution: 0.01 mm Accuracy: ±0.04 mm Display height: 11 mm Special features Digital depth caliper Swiss Digit high-contrast display Robust, sealed electronics Suitable for medium-range workshop measurements FAQ What measuring range does the caliper cover? The depth caliper has a measuring range of 0–500 mm, placing it in the medium-range category suitable for larger fixtures and assemblies. What resolution and accuracy can be expected? The instrument provides a resolution of 0.01 mm with a stated accuracy of ±0.04 mm, suitable for standard workshop quality control tasks. Is the caliper protected against dust and liquids? Yes, the device carries an IP67 rating, offering dust-tight protection and water immersion resistance for use in demanding environments. Does the display offer good legibility in the workshop? The Swiss Digit display with 11 mm character height delivers clear, easy-to-read figures to reduce reading errors and speed inspections. Is the instrument supplied with calibration documentation? The product is delivered with standard calibration; ISO 17025 calibration is not indicated for this item. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
500mm Depth Gauge Digital With Nail Tip, Color Touchscreen, Wireless+USB, IP54 - Microtech Metrology
Take advantage of precise depth measurement with reliable data transfer and robust workshop protection; the combination of ±0.03 mm accuracy, 0–500 mm measuring range and Wireless + USB output supports consistent inspection workflows. Order the digital depth caliper directly via Metav Werkzeuge or consult our specialists for application advice. Digital depth caliper by Microtech Metrology — 0–500 mm, Colour Touchscreen The digital depth caliper from Microtech Metrology is a workshop-grade instrument for accurate depth measurement across medium-sized components, designed for integration into inspection and production processes. Colour 1.54" touchscreen display 0–500 mm measuring range Accuracy ±0.03 mm Wireless + USB data output Precision that reduces rework and speeds inspection The caliper delivers repeatable depth values thanks to a reading resolution of 0.005 mm and a specified accuracy of ±0.03 mm, which together narrow measurement uncertainty for standard machine-shop tasks. This precision is particularly valuable when checking bores, recesses and stepped features where consistent depth data avoids rework and ensures parts meet drawing tolerances. The device is categorised in the medium range (300–500 mm) class, offering a balance between reach and rigidity that suits jig, fixture and general machining applications. Streamlined data capture for quality documentation Equipped with Wireless + USB output and a clear colour 1.54" touchscreen, the instrument simplifies data logging and traceability. Wireless transfer supports real‑time collection on inspection software, while USB offers direct export for manual archiving. These connectivity options reduce transcription errors and speed up quality-control loops, so production decisions are based on reliable numeric evidence rather than manual note taking. Integration into existing metrology chains is straightforward thanks to standard digital interfaces. Built to withstand workshop conditions and frequent use The device meets an IP54 protection rating, which guards against dust ingress and splash water typical in a manufacturing environment, and the robust construction holds alignment over routine handling. The logical digital interface and stable measuring carriage support rapid one-handed operation, making the tool well suited to serial checks on the shop floor. Backed by the Metav distribution and logistics network, the instrument is presented as a pragmatic choice for teams seeking industrial usability without specialist maintenance overhead. Contact Metav Werkzeuge for supply from Emmerich and to discuss technical integration of this Microtech Metrology depth caliper into existing quality workflows Technical data Article number: 1432030507 GTIN: 4061905452659 Brand: Microtech Metrology Category: Digital caliper Key figures Measuring range: 0–500 mm Reading resolution: 0.005 mm Accuracy: ±0.03 mm Display: Colour 1.54" touchscreen Protection class: IP54 Special features Wireless + USB data output Digital operation for depth measurements Medium measuring-range class (300–500 mm) Suitable for workshop and machine‑shop inspection FAQ What measuring range does the caliper cover? The digital depth caliper covers a measuring range of 0–500 mm, placing it in the medium class suitable for fixtures, housings and larger components. How precise are measurements with this instrument? Measurements are delivered with a reading resolution of 0.005 mm and a stated accuracy of ±0.03 mm, appropriate for routine workshop quality control. How can measurement data be exported from the caliper? Data can be transmitted via Wireless connection for live logging or exported over USB for direct transfer to inspection software or spreadsheets. Is the caliper suitable for use on the shop floor? Yes. The device is rated IP54, offering protection against dust and splashes, and built for regular handling in manufacturing environments. Which brand and article number should be referenced for ordering or spare parts? Reference Microtech Metrology and article number 1432030507 when enquiring about the digital depth caliper and available accessories. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
500mm Digital Bore Distance Caliper With 20mm Taper And Fine Adjustment, Supplied In Case - Metav IndustryLine
Combine robust hardened stainless steel construction with a wide 20–500 mm measuring range and a clear digital display to ensure dependable bore‑distance readings; order the Digital bore‑distance caliper directly via Metav Werkzeuge or consult our specialists for system integration. Digital bore-distance caliper M240.294 — Digital caliper with 20 mm cone and 500 mm range (Metav IndustryLine) Digital bore‑distance caliper M240.294 is a precision instrument for measuring centre‑to‑centre distances in bores and holes across machine shops and inspection benches. Digital display mm/inch, ABS/INC, preset Hardened stainless steel construction Measuring range 20–500 mm for medium parts RB2 data output for process integration Reliable centre‑to‑centre measurement for medium components This caliper is designed for the workshop length class that bridges handheld convenience and extended reach: the 20–500 mm range suits routine machine‑shop and fixture measurements where reach and rigidity must be balanced. The instrument will access bore depths and centre distances via a 20 mm measurement cone and probe geometry with probe lengths of 61.5 mm and 216.5 mm, making it easier to position the measuring tips inside bores. The built‑in fine adjustment mechanism facilitates controlled closing of the jaws, which reduces operator‑induced error and supports reproducible readings when working on medium‑sized components. Clear digital readout with integration for quality systems A clear digital display provides readings in millimetres or inches and supports ABS/INC and zero/preset functions for quick offsetting and comparative gauging. The display resolution is 0.01 mm (0.0005 inch), which aligns with standard digital caliper practice for workshop metrology and delivers repeatable values suitable for production control. For data capture and process control the unit offers RB2 data output, enabling straightforward connection to SPC or data‑logging devices so measurements can be recorded and analysed without manual transcription. Robust build for shop‑floor durability and metrology quality Constructed from fully hardened stainless steel, the instrument combines corrosion resistance with the profile stiffness required for repeatable measurements over time. At a weight of 3.6 kg the tool has the mass and stability to feel secure during handling while remaining manageable for single‑operator use. Delivered in a protective transport case, the caliper is protected during transit and storage; the factory standard ensures consistent inspection criteria and a ready‑to‑use instrument for daily measurement tasks. Practical benefits for inspection and production workflows As a dedicated bore‑distance measuring device, this caliper reduces setup time for alignments and hole‑pattern verification, shortening inspection loops and lowering the risk of rework. The combination of fine adjustment and digital presetting speeds comparative checks and first‑article inspections, supporting higher throughput in recurring quality routines. Intended for machine shops, toolrooms and quality departments, the instrument provides a balance of accessibility and metrological reliability that helps maintain production momentum. For advice on integrating the M240.294 into inspection processes or to request detailed technical information, contact Metav Werkzeuge in Emmerich by phone or email for a tailored consultation. Technical Data Article number: M240.294 GTIN: 4054469159126 Weight: 3.6 kg Material: hardened stainless steel Factory standard: Werksnorm Numbers / Core technical data Measuring range: 20–500 mm Resolution: 0.01 mm / 0.0005 inch Cone diameter: 20 mm Probe lengths: L1 = 61.5 mm; L2 = 216.5 mm Display functions: mm/inch, ABS/INC, NULL/PRESET Special features Digital display with ON/OFF, mm/inch, ABS/INC, NULL/PRESET Fine adjustment for controlled probing Data output: RB2 for process integration Delivered in protective transport case FAQ What measuring tasks is this caliper best suited for? The caliper is optimised for centre‑to‑centre and bore‑to‑bore distances on medium‑sized components; its 20–500 mm range covers typical machine‑shop and fixture measurements. What accuracy and resolution can be expected from the display? Readings are shown with a resolution of 0.01 mm (0.0005 inch), providing workshop‑level precision suitable for quality‑control and production inspection. How does the RB2 data output support integration? RB2 data output on the instrument allows digital transfer of measured values to data‑collection systems or SPC software, enabling automated logging of results without manual entry. Is the caliper protected against corrosion and heavy use? Yes; the device is manufactured from fully hardened stainless steel, offering both wear resistance and protection against corrosion in typical workshop environments. Does the device include fine adjustment for sensitive measurements? A dedicated fine adjustment control is provided to allow precise approach and secure positioning during bore measurements. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
500mm Digital Caliper 150mm Jaw Length Fine Adjustment Stainless Steel, Factory Standard 0.05mm, With ON/OFF mm/inch Hold Preset - Metav IndustryLine
Benefit from reliable workshop-grade measurement with a 0–500 mm range, a 0.01 mm digital resolution and a hardened stainless‑steel construction that resists wear; the fine‑adjustment thumbwheel ensures repeatable settings for production inspection. Order directly via Metav Werkzeuge or consult our specialists for specification matching. Digital caliper M217.054 — 0–500 mm digital workshop caliper, hardened stainless steel The Digital caliper M217.054 is a medium‑range measuring instrument for accurate external, internal, depth and step measurements in metalworking and general workshop inspection. 0–500 mm measuring range 0.01 mm resolution, digital readout Fine‑adjustment thumbwheel for precise skimming Hardened stainless steel construction Precision and consistency for routine inspection The caliper delivers a clear digital display with a standard 0.01 mm resolution, enabling rapid, verifiable readings that reduce interpretation error compared with analogue scales. The instrument’s fine adjustment thumbwheel controls the sliding action, so each measurement can be positioned consistently; this benefits repetitive tasks such as batch inspection or fixture set‑up. The device is built from hardened stainless steel, improving wear resistance and maintaining geometric stability over extended use, which supports predictable quality control in daily production. Faster workflows with practical digital functions Equipped with an intuitive function set — mm/inch switching, HOLD, PRESET and zeroing at any position — the caliper speeds common shop processes by removing conversion steps and retaining reference points. The concise button set simplifies traceable measurement routines and accelerates go/no‑go checks in assembly lines. Power is supplied by a standard 3 V system, and the display includes on/off and absolute/relative toggles for flexible measurement strategies, improving throughput without sacrificing precision. Designed for real workshop conditions Engineered as a medium‑range instrument, the 0–500 mm format strikes a balance between reach and stiffness: suitable for component work up to sub‑assembly scale while remaining easy to handle for single‑operator tasks. The tool conforms to a factory standard of 0.05 mm, documented on delivery, and comes without a probing tip as specified; the robust construction and ergonomic jaw geometry keep alignment errors low during external and internal checks. The caliper’s concise controls and solid material choice make it a dependable metrology partner for machine shops and maintenance departments. Contact Metav Werkzeuge for application guidance and to secure the Metav IndustryLine digital caliper M217.054 for workshop‑grade precision measurement Technical data Article number: M217.054 GTIN: 4054469110929 Manufacturer: Metav IndustryLine eClass: 21170344 Label: Digital‑Messschieber, 500 x 150 mm, ohne Spitze, Werksnorm 0.05 mm rostfrei, Feineinstellung Facts Measuring range: 0–500 mm Jaw length: 150 mm Resolution: 0.01 mm Power supply: 3 V Factory accuracy: 0.05 mm Digital: yes Special features Material: hardened stainless steel Fine‑adjustment thumbwheel Digital display with ON/OFF, mm/inch, 0/ABS, HOLD, TOL, PRESET Data output: RB 5 Conforms to workshop (Werksnorm) calibration standards FAQ What measuring range does this caliper cover? The caliper covers a 0–500 mm range, making it a medium‑range instrument suitable for most workshop and machine‑shop tasks. What is the display resolution and accuracy? The device provides a 0.01 mm display resolution; the factory standard accuracy is stated as 0.05 mm and is documented on delivery. Is the caliper suitable for repeated production checks? Yes. The combination of hardened stainless steel, a fine‑adjustment thumbwheel and repeatable digital zeroing makes the tool well suited to repeated inspection tasks. Which measurement functions are available on the display? The caliper offers mm/inch switching, HOLD, PRESET, absolute/relative zeroing and an ON/OFF function for flexible measurement workflows. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
500mm Digital Caliper Fine Adjustment Stainless Steel With 200mm Jaw Length, RB 5 Data Output, Supplied In Case - Metav IndustryLine
Benefit from a workshop-ready combination of a 0–500 mm measuring range, fully hardened stainless-steel construction and precise fine adjustment for repeatable results in medium-format measurement tasks. Order the Digital Caliper directly via Metav Werkzeuge or consult their advisors for application guidance. Digital Caliper M217.054.1 — 0–500 mm, fine adjustment (Metav IndustryLine) The Digital Caliper M217.054.1 is a robust, workshop-grade measuring instrument designed for medium-format inspection and layout work, offering precise sliding control and versatile digital readout for machine shops and toolrooms. 0–500 mm measuring range Fully hardened stainless-steel frame Fine-adjustment slide for exact positioning Digital display with mm/inch and TOL functions Precise medium-range measurement for everyday workshop use This caliper is classified for the "Mittel" range, covering up to 500 mm, which makes it especially suitable for general engineering, fixture construction and mould work where reach and rigidity must be balanced. The instrument provides a resolution of 0.01 mm, enabling standard digital accuracy on the shop floor, while the declared factory standard 0.05 mm sets an expected tolerance for routine quality checks. The longer measuring span compared with compact models increases versatility without compromising handling, so single-operator checks on assemblies and housings become efficient and consistent. Faster data capture and operator-friendly functions to speed production Equipped with a clear digital display and multi-function keys (ON/OFF, mm/inch, ABS/0, HOLD, TOL and PRESET), the caliper supports quick conversion and tolerance checks at the point of measurement. A dedicated data output (RB 5) is provided for capturing readings into inspection systems or SPC workflows, simplifying documentation and reducing transcription errors. These features combine to lower cycle time in repetitive measurement tasks and to integrate measurement steps directly into production control. Robust build and controlled contact for repeatable readings The sliding frame is made from fully hardened stainless steel, offering wear resistance and corrosion protection for workshop environments. A fine-adjustment mechanism ensures delicate, reproducible closing of the jaws, while the 200 mm jaw length improves stability on larger workpieces. The instrument runs from a 3 V power source and is supplied to a factory standard; mechanical design and controlled sliding help to minimise operator-induced variation during external, internal and step measurements, so measurements remain trustworthy across shifts. For dependable medium-range precision from Metav IndustryLine, contact Metav Werkzeuge in Emmerich for a suitability check and rapid supply tailored to the workshop’s needs. Technical Data SKU: M217.054.1 GTIN: 4054469110936 eClass: 21170344 Article label: Digital caliper, 0–500 mm, without probe, factory standard 0.05 mm Numbers / Core technical data Measuring range: 0–500 mm Resolution: 0.01 mm Jaw length: 200 mm Power: 3 V Special features / Materials Material: stainless steel, fully hardened Fine adjustment slide Digital readout with ON/OFF, mm/inch, ABS/0, HOLD, TOL, PRESET Data output: RB 5 Norm: factory standard 0.05 mm FAQ Is this caliper suitable for general machine-shop measurement tasks? This caliper is intended for medium-format workshop measurement; the Digital Caliper M217.054.1 offers a 0–500 mm range and features that match common machine-shop and mould-making inspection needs. What accuracy and resolution can be expected from this instrument? The instrument provides a resolution of 0.01 mm and is supplied to a factory standard of 0.05 mm, which defines the typical tolerance for routine checks. Can measurement data be transferred directly to a PC or SPC system? Yes, the caliper includes a data output (RB 5) to enable direct transfer of readings into collection systems or software for traceable records. Does the caliper require a special power supply? The caliper operates from a standard 3 V battery; no special power unit is needed for normal workshop use. What advantages does the fine-adjustment slide provide? The fine-adjustment mechanism permits controlled closing of the jaws for repeatable seating and improved measurement consistency on delicate or precision parts. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
500mm Digital Caliper With 100mm Jaw, Fine Adjustment, Stainless Steel, 0.01mm Resolution, Supplied In Case - Metav IndustryLine
Take advantage of the combination of hardened stainless steel construction, a 0–500 mm measuring range and a 0.01 mm digital resolution for repeatable, workshop-ready measurements. Order the Digital Caliper M217.064 directly via Metav Werkzeuge or contact our consultants for specification advice and stock information. Digital Caliper M217.064 — 0–500 mm, hardened stainless steel, fine adjustment (Metav IndustryLine) The Digital Caliper M217.064 is a medium-range digital caliper engineered for routine and precision tasks in machine and metal workshops, offering a balanced reach with controlled stiffness and a dedicated fine‑adjustment mechanism. Medium-range 0–500 mm measuring span Hardened stainless steel construction Digital display with mm/inch and TOL functions Fine-adjustment thumbwheel for controlled moves Consistent medium-range precision for everyday workshop use This caliper is classified as a medium-range instrument (measuring range up to 300–500 mm) and is aimed at operations that require both reach and rigidity. The 0–500 mm span provides the reach needed for components such as housings, mounting fixtures and medium-sized assemblies while keeping the profile stiff enough for reproducible results. The combination of a robust frame and controlled measuring slides ensures that a single operator can achieve steady readings across typical shop tasks, reducing rework and inspection time. Digital functionality that supports traceability and quick decisions Equipped with a clear digital display and the standard control set (ON/OFF, mm/inch, 0/ABS, HOLD, TOL and PRESET), this measuring instrument converts raw measurement into actionable data quickly. The readout offers 0.01 mm resolution (0.0005 in), enabling detailed checks without complex setups. An RB 5 data output is provided for integration into data-collection workflows, allowing measurement logging with compatible interfaces. The straightforward controls speed up repetitive checks and make pass/fail decisions intuitive on the shop floor. Durable construction and fine‑adjustment for repeatable results Manufactured from hardened stainless steel, the caliper resists wear and remains stable under daily use. The integrated fine-adjustment thumbwheel assists precise jaw positioning, so delicate parts and narrow tolerances are handled without overshoot. The instrument is delivered to factory standard with a factory tolerance of 0.04 mm, which ensures consistent baseline quality for production and inspection tasks. These features together reduce measurement scatter and support stable quality control across batches. Choose the Metav IndustryLine Digital Caliper M217.064 for reliable medium-range measurement; contact Metav Werkzeuge by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 for technical guidance and availability in your region Technical Data Article number: M217.064 GTIN: 4054469111117 ECLASS: 21170344 Category: Calipers Facts Measuring range: 0–500 mm Resolution: 0.01 mm / 0.0005 in Power: 3 V Factory tolerance: 0.04 mm Data output: RB 5 Special features Material: hardened stainless steel Fine-adjustment thumbwheel Digital display with ON/OFF, mm/inch, 0/ABS, HOLD, TOL, PRESET Measuring system: digital FAQ Is the caliper delivered calibrated? The Digital Caliper M217.064 is supplied with factory calibration to a tolerance of 0.04 mm; no ISO 17025 certificate is provided as part of the standard delivery. What resolution and units does the instrument use? The display provides a 0.01 mm resolution and 0.0005 in in imperial mode; unit switching is available via the mm/inch function. What material is the caliper made from and how durable is it? The instrument is made from hardened stainless steel, designed for regular workshop use with high resistance to wear and stable dimensional behaviour. Can measurement data be transferred to a PC or data logger? Measurement values can be output via the unit’s RB 5 data interface; connection requires a compatible cable or interface module for the receiving system. Which applications suit this caliper best? This model is intended for medium-range inspection and measuring tasks in machine and metalworking environments—ideal for fixtures, housings and general workshop quality control using the Digital Caliper M217.064. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
500mm Digital Caliper With 100mm Movable Jaw, Fine Adjustment, Stainless Steel, Plastic Case - Metav IndustryLine
Take advantage of the combination of 500 mm measurement reach, robust stainless hardened construction and a digital interface (RB 2) for streamlined quality documentation; order the instrument directly via Metav Werkzeuge or contact our consultants for tailored advice. Digital Caliper M217.250 — 500 mm range with fine adjustment (Metav IndustryLine) The Digital Caliper M217.250 is a 500 mm digital measuring instrument with a movable 100 mm jaw and fine-adjustment slide, designed for workshop metrology and medium‑sized component inspection. 500 mm measurement range, robust design Fine-adjustment slide for precise positioning Stainless hardened construction for durability Digital display with mm/inch and data output RB 2 Medium-range reach with workshop-grade precision Classified as a medium-range caliper (measuring up to 500 mm), this instrument balances reach and stiffness to deliver reproducible results on larger fixtures, housings and mounting interfaces. The digital readout offers a resolution of 0.01 mm, which is the standard for many inspection routines and provides clear, comparable values for process control. The combination of reach and readable resolution simplifies tasks where longer jaws are required but excessive flex would otherwise reduce repeatability. Fine-adjustment and rugged materials for repeatable handling Equipped with a fine-adjustment slide and a movable 100 mm jaw, the instrument enables controlled approach to contact points and tiny positional corrections without overshoot. Constructed from stainless hardened steel, the caliper resists wear and corrosion while maintaining the profile accuracy of the measuring faces. These design choices reduce measurement variation over time and ensure that routine workshop handling does not degrade the tool’s performance. Digital functions that integrate with quality workflows The instrument’s digital display includes on/off, mm/inch, ZERO (ABS) and PRESET functions for flexible reading and quick set‑ups. For traceable data collection, the caliper provides a RB 2 data interface that can be connected to data loggers or quality‑control software, allowing direct transfer of measured values and reducing transcription errors. The electronic feature set supports efficient documentation and speeds up sampling during incoming inspection or in‑process checks. Factory standard delivery and practical applications Supplied to a factory standard (Werksnorm), the caliper is intended for everyday metrology in machine shops, toolrooms and quality departments where medium‑sized components are common. Typical uses include checking bore spacings on assemblies, verifying external dimensions of housings and setting up fixtures. The robust construction and digital connectivity make the instrument suitable as a workshop reference tool for production and maintenance operations. Contact Metav Werkzeuge in Emmerich to discuss how the Metav IndustryLine M217.250 can be integrated into your inspection process or to arrange supply and technical consultation Technical data Article number: M217.250 GTIN: 4054469111285 SKU: M217.250 Brand: Metav IndustryLine Material: stainless hardened steel Standard: Werksnorm eClass: 21170344 Customs tariff: 90173000 Facts Measurement range: 0–500 mm Resolution (display): 0.01 mm Resolution (inch): 0.0005 in Jaw length: 100 mm Data output: RB 2 Special features Digital functions: on/off, mm/inch, ZERO (ABS), PRESET Fine-adjustment slide for controlled positioning Movable measuring jaw for extended contact geometry Suitable for workshop and toolroom metrology FAQ Is the M217.250 suitable for workshops that require longer measuring ranges? The M217.250 is intended for medium‑range tasks up to 500 mm and combines sufficient reach with stiffness for reliable shop measurements. What resolution and display options does the caliper provide? The instrument offers a display resolution of 0.01 mm and an inch resolution of 0.0005 in; the display supports mm/inch switching, ZERO (ABS) and PRESET operations. Can measurement data be exported directly from the caliper? Yes. The caliper provides a RB 2 data interface for direct transfer of measured values to data loggers or quality systems. What construction materials ensure durability for daily use? The tool is made from stainless hardened steel, offering wear resistance and corrosion protection suited to frequent workshop handling. Is the caliper delivered calibrated to a specific standard? The instrument is supplied to factory standard (Werksnorm); the delivery does not state an ISO 17025 calibration certificate. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
500mm Digital Caliper With 150mm Blade, Cross/Knife Jaws 45mm, Fine Adjustment, Factory Standard 0.05mm - Metav IndustryLine
The combination of a 0–500 mm measurement range, a 0.01 mm digital resolution and a hardened stainless steel construction ensures dependable, repeatable workshop measurements with precise positioning via fine adjustment; order the caliper directly via Metav Werkzeuge or consult our specialists for specification support. Digital caliper M217.024 — 0–500 mm, hardened stainless steel, fine adjustment (Metav IndustryLine) The Digital caliper M217.024 is a workshop-grade 0–500 mm measuring instrument with knife-type jaws and cross points, designed for accurate positioning and versatile measurement tasks in machine and metalwork environments 0–500 mm measurement range 0.01 mm digital resolution Hardened stainless steel construction Fine adjustment for exact positioning Precision that speeds up quality checks and reduces rework The caliper combines a 0.01 mm digital readout with a factory tolerance of 0.05 mm, providing a clear, verifiable basis for everyday inspection and set-up tasks. The high-contrast display and quick mm/inch conversion reduce cycle times during incoming inspection or in-process checks; the 0.01 mm resolution supports standard workshop quality control while the Werksnorm 0.05 mm indicates the expected reproducibility under normal workshop conditions. This makes the instrument an efficient tool for production environments where fast, traceable measurements matter. Robust build and jaw geometry for varied profiles Constructed from hardened stainless steel, the slide and jaws are designed for long-term durability in demanding shop conditions. The combination of knife-type jaws and cross points (45 mm) provides practical versatility: the knife geometry is useful when measuring thin or profiled edges, while the cross points assist with small recesses and grooves. The integrated fine adjustment mechanism allows controlled, reproducible closing of the jaws, lowering the risk of measurement error caused by overshoot and enabling accurate seating on delicate workpieces. Digital functions engineered for integration and repeatability The caliper’s display offers practical functions — mm/inch, 0/ABS, HOLD, TOL and PRESET — which simplify comparative checks, data capture and tolerance inspections at the bench. A dedicated RB 5 data output is provided for connection to data loggers or inspection software, supporting digital documentation and quality traceability. These features combine to reduce manual transcription errors and speed up inspection workflows while keeping measurement records consistent and auditable. Designed for workshop use and backed by Metav competence Classified as a Mittel-range instrument (0–500 mm), this caliper covers the most common workshop tasks while balancing reach and rigidity for reliable single-handed handling. Supplied by Metav IndustryLine, the product is supported by Metav Werkzeuge’s European distribution and quality filter in Emmerich, ensuring consistent supply and specialist advice. Metav’s experience in democratising precision equipment means straightforward access to measurement tools that perform reliably across industry, trade and technical retail. For reliable 0–500 mm workshop measurement and guidance on integrating the caliper into inspection routines, contact Metav Werkzeuge for product advice and local supply from Emmerich Technical data SKU: M217.024 GTIN: 4054469110752 Eclass: 21170344 Customs tariff number: 90173000 Manufacturer: Metav IndustryLine Facts Measurement range: 0–500 mm Resolution: 0.01 mm / 0.0005 in Jaw length: 150 mm Weight: 1.4 kg Factory tolerance / norm: 0.05 mm Special features Material: hardened stainless steel Fine adjustment for precise jaw movement Knife-type jaws and cross points, 45 mm Digital display with ON/OFF, mm/inch, 0/ABS, HOLD, TOL, PRESET Data output: RB 5 FAQ What accuracy can be expected from the caliper in daily use? The caliper offers a display resolution of 0.01 mm and is supplied to a factory tolerance of 0.05 mm, which provides dependable repeatability for standard workshop measurements using the Digital caliper M217.024. Is the instrument suitable for measuring thin-walled or profiled parts? Yes, the knife-type jaws and cross points (45 mm) make the device suitable for thin sections and profiled edges; the fine adjustment helps achieve consistent contact without damaging delicate surfaces. Can measurement data be exported to a PC or data logger? The instrument provides an RB 5 data output for direct connection to compatible data acquisition systems, enabling straightforward digital documentation of measurement results. Does the caliper require a special calibration certificate? The M217.024 is delivered to factory standard with the stated tolerance; if an accredited calibration certificate is required, please consult Metav Werkzeuge for available calibration options and traceability services. What workshop applications is this caliper best suited to? With a 0–500 mm range and robust stainless construction, the caliper is ideal for general machine and metalwork tasks, fixtures and medium‑sized components where reach and stiffness must be balanced. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
500mm Digital Caliper With 150mm Jaw Length, Cross Tips, Fine Adjustment, Stainless Steel, IP54 - Metav IndustryLine
Combining a robust stainless hardened construction, precise fine‑adjustment cross‑point jaws and a 500 mm measuring range, this digital caliper delivers reproducible medium‑range measurements for workshop and fixture work; benefit from clear digital readout and factory standard accuracy of 0.05 mm. Order directly via Metav Werkzeuge or request advice from our consultants for process integration. Digital Caliper M217.034 — 0–500 mm, cross‑point jaws, fine adjustment The Digital Caliper M217.034 is a medium‑range electronic measuring instrument designed for reliable component measurement in machine shops, jig and fixture assembly and quality control tasks. 0–500 mm measuring range for medium parts Fine‑adjustment mechanism for repeatable readings Hardened stainless construction for long life Digital display with mm/inch, ABS and preset Accurate medium‑range measurements for everyday workshop use The 0–500 mm measuring span places this instrument in the medium category, offering the best compromise between reach and stiffness for general machine‑shop use. With a clear digital display and standard 0.01 mm resolution, the caliper supports fast inspection and setting tasks while the factory accuracy of 0.05 mm gives a predictable tolerance band for routine QC. This combination reduces rework and shortens inspection cycles, improving throughput without complex procedures. Electronic functions that support traceability and workflow Equipped with a multi‑function display (mm/inch, ABS/0, HOLD, TOL and PRESET) and RB 5 data output, the instrument facilitates documented measurement and integration into inspection routines. The preset and tolerance features speed up comparative checks, while the HOLD function simplifies reading awkward measurements. These electronic aids convert manual measuring into an efficient, auditable step within a larger production or QA process. Mechanical design focused on reproducibility and durability Manufactured from fully hardened stainless steel, the caliper resists typical workshop wear and preserves jaw geometry over time. The cross‑point jaws provide a defined contact for small grooves and bores, and the fine‑adjustment control allows micro‑corrections without disturbing the setup. Such mechanical decisions ensure that measurements remain reproducible across repeated use, which is essential for assembly and inspection tasks where consistency matters. Practical benefits for procurement and workshop teams As a medium‑range digital caliper, this instrument reduces the number of separate gauges required for parts up to 500 mm, freeing up bench space and simplifying tool management. The electronic readout and data output support modern quality processes, while the hardened construction limits downtime caused by damaged jaws or corrosion. For buyers seeking measurable efficiency gains, this tool represents a pragmatic balance of durability, usability and measuring performance. For process enquiries or to discuss how the M217.034 fits specific workshop requirements, contact Metav Werkzeuge for technical guidance and tailored procurement assistance via info@metav-werkzeuge.com or by phone on +49 2822 7131930. Technical data Article number: M217.034 GTIN: 4054469110783 EClass: 21170344 Facts Measuring range: 0–500 mm Resolution (display): 0.01 mm Display functions: mm/inch, ABS/0, HOLD, TOL, PRESET, ON/OFF Accuracy (factory standard): 0.05 mm Jaw length: 150 mm Data output: RB 5 Material: stainless steel, fully hardened Special features Cross‑point jaws Fine‑adjustment mechanism Digital caliper with multifunction display FAQ Is the caliper delivered with a calibration certificate? The caliper is supplied to factory standard with stated accuracy of 0.05 mm; a factory calibration record accompanies the instrument. What measuring range and resolution are provided? The M217.034 covers 0–500 mm with a display resolution of 0.01 mm and factory accuracy rated at 0.05 mm. Can measurement data be exported to inspection software? Yes — the instrument provides an RB 5 data output suitable for connection to data collection or inspection systems. Are the jaws suitable for internal and depth measurements? The cross‑point jaws and the caliper’s sliding depth function enable internal, external and depth measuring tasks for components within the medium range. Is this caliper suitable for use in a production quality‑control station? Designed for workshop and QC use, the M217.034 offers repeatable readings, digital functions for traceability and a hardened stainless design for durability in production environments. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
500mm Digital Caliper With Top And Bottom Measuring Inserts, 50/100mm Jaws, IP Not Specified - Metav IndustryLine
Taking advantage of a 500 mm measuring range and a 0.01 mm digital resolution, this caliper combines broad reach with fine readout for consistent workshop measurements; the hardened stainless‑steel construction and reversible measuring jaws (50 / 100 mm) ensure robust handling and versatile contact positions. Order the Metav IndustryLine digital universal caliper directly via Metav Werkzeuge or ask the consultants for technical advice. Metav IndustryLine Digital Universal Caliper – 500 mm, 0.01 mm readout The Metav IndustryLine digital universal caliper offers a medium‑range measuring solution for machine shops and fixture makers, combining wide reach with a fine digital display for repeatable, production‑grade measurements 500 mm measuring range 0.01 mm digital resolution Hardened stainless steel frame Reversible jaws 50/100 mm Accurate measurements across medium‑sized components With a 500 mm range and a 0.01 mm resolution, this instrument sits in the medium category suitable for larger assemblies while remaining manageable in daily use. The electronic readout provides quick, unambiguous values in metric or imperial units, reducing transcription errors and speeding up inspection loops. The instrument supports the typical measurement tasks found in general machine‑shop quality control and toolroom work, where a balance of reach and stiffness is required. Using a digital display with standard control keys allows users to switch between mm/inch and select absolute or incremental modes without complex procedures, which keeps throughput consistent in repetitive checks. Built to endure workshop conditions and provide stable contact The caliper is manufactured from hardened stainless steel and fitted with a metal housing for the electronics, which increases resistance to daily knocks, coolant exposure and shop contamination. The robust construction adds mass where it matters, improving contact stability on larger parts and reducing measurement scatter. Two measuring inserts—one shorter (50 mm) and one longer (100 mm)—are provided and can be mounted at either the top or bottom position, creating flexible jaw geometries for external, internal or depth checking without improvisation. This design helps maintain repeatability when measuring stepped features or bore distances on assemblies. Simple digital workflow and traceable data options The unit features a straightforward control set: ON/OFF, mm/inch, ABS/INC and zero/preset functionality for rapid set‑ups and relative measurements. A standard readout resolution of 0.01 mm delivers clear results for general precision tasks, while the available data interface RB 2 supports transfer to data collectors or inspection software to avoid manual logging. Integration into inspection routines shortens cycle times and reduces operator influence on records — a rational improvement that enhances both quality assurance and shop efficiency. Backed by Metav’s commitment to democratising precision, this caliper supports reliable measurement routines across industry, craft and distribution channels. Contact Metav Werkzeuge today for a tailored quotation or a technical clarification on the Metav IndustryLine 500 mm digital universal caliper (M240.203) Technical data Article number: M240.203 GTIN: 4054469158266 Brand: Metav IndustryLine Facts Measuring range: 0–500 mm Readout resolution: 0.01 mm Weight: 2.5 kg Jaw cross‑section: 20 x 15 mm Jaw lengths: top 50 mm, bottom 100 mm Tariff number: 90173000 Special features Material: hardened stainless steel, metal housing Digital functions: ON/OFF, mm/inch, ABS/INC, 0/PRESET Data output: RB 2 Measuring inserts can be mounted both on top and bottom FAQ What measurement accuracy can be expected from this caliper? The Metav IndustryLine digital universal caliper (M240.203) provides a display resolution of 0.01 mm; this readout level suits standard workshop and quality‑control tasks where clear, repeatable values are required. Can the unit switch between metric and imperial units? Yes. The device offers mm/inch selection via the control panel, enabling seamless switching for drawings or processes that use imperial dimensions. Are the measuring jaws suitable for internal and external measurements? The supplied jaw set includes a shorter 50 mm and a longer 100 mm insert, and the design allows mounting on either the top or bottom position to address external, internal and depth applications. Is the caliper suitable for incorporation into a digital inspection routine? Yes. The instrument features a data‑output interface RB 2, which supports connection to data collectors or inspection systems to eliminate manual entry and improve traceability. What makes this model suitable for daily industrial use? The combination of a hardened stainless‑steel frame, metal display housing and practical jaw geometry yields durability and stable contact conditions, making it well suited to regular shop‑floor usage. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
500mm Digital Depth Caliper Colour Touchscreen, Wireless/USB, IP54, ISO 17025 Calibrated - Microtech Metrology
Take advantage of the combination of precise medium-range measuring capability, integrated wireless data transfer and an included ISO 17025 calibration certificate for reliable quality control; order the calibrated depth caliper directly via Metav Werkzeuge or consult our specialists for application support. Depth caliper with microcomputer — 0–500 mm range, colour touch display (Microtech Metrology) The Depth caliper with microcomputer is a precision digital instrument designed for medium-range depth measurements in workshops, toolrooms and quality departments up to 500 mm. 0–500 mm measuring range Colour 1.54" touch display Wireless and USB data output Delivered calibrated to ISO 17025 Accurate medium-range measurement for consistent results This instrument is tailored to the Mittel class of calipers, covering a 0–500 mm range that balances reach and stiffness for everyday machining tasks. With a display resolution of 0.01 mm and a documented accuracy of 0.04 mm, the device delivers repeatable readings that support standard inspection routines and assembly checks. The included ISO 17025 calibration certificate confirms traceable measurement performance, reducing uncertainty in quality reports and simplifying compliance for incoming inspection or production control. Streamlined data capture for faster quality workflows Integrated wireless connectivity alongside USB output and a colour 1.54" touchscreen turns manual readings into digital records quickly, cutting transcription time and lowering the risk of input errors. The digital interface supports efficient logging of depth measurements into inspection software or a spreadsheet, enabling smoother data handling for batch documentation and statistical process control. This technological setup is particularly useful where frequent data transfer and traceability are required. Robust design for shop-floor reliability Built for regular use, the instrument features handcrafted measuring jaws and an IP54 protection rating, offering resistance to dust and splashing liquids commonly encountered in production environments. The construction emphasises tactile quality and longevity, so handling and fixturing remain precise over repeated cycles. These design choices reduce downtime and maintenance needs, helping to keep inspection routines uninterrupted. Ideal deployment and practical benefits in production The caliper suits machine shops, toolmaking and quality laboratories that require dependable depth measurement without the complexity of larger systems. Its combination of medium-range capacity, clear touchscreen readout and digital outputs supports faster part verification, setup checks and incoming goods inspection. For teams aiming to improve throughput and measurement traceability, this instrument provides a pragmatic step towards more efficient metrology at the workbench. Contact Metav Werkzeuge for tailored advice on integrating this ISO 17025‑calibrated depth caliper into existing inspection processes and to arrange purchase or delivery details Technical data Article number: 1432010507 GTIN: 4061905039089 Brand: Microtech Metrology Measurements Measuring range: 0–500 mm Display resolution: 0.01 mm Accuracy: 0.04 mm Display: Colour 1.54" touchscreen Special features Wireless and USB data output Delivered with ISO 17025 calibration certificate IP54 protection class Handcrafted measuring jaws Digital depth measuring instrument (digital caliper) FAQ What calibration documentation is supplied with the depth caliper? The depth caliper is supplied fully calibrated with an ISO 17025 calibration certificate, confirming traceability and documented measurement uncertainty. Which data interfaces are available for measurement transfer? Measurement data can be transferred via wireless connection or through USB, enabling straightforward integration with inspection software or data-collection systems. What accuracy and resolution can be expected in typical use? The instrument provides a resolution of 0.01 mm and an accuracy value of 0.04 mm, suitable for standard workshop and quality-control tasks within the 0–500 mm range. Is the caliper suitable for shop-floor environments? Yes. With an IP54 rating and robust, handcrafted measuring jaws, the device is designed for regular use in production settings where dust and light moisture are present. Which workshop applications is this instrument most suitable for? It is well suited to depth checks on machined components, fixture set-up, incoming inspection and general toolroom measurement where medium-range, repeatable depth data and digital output are required. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
500mm Digital Einbaumessschieber senkrecht, 0,01mm, DIN 862 - Metav IndustryLine
Die erstklassigen Bewertungen von Metav Werkzeuge stehen für viele loyale Kunden. Finde es selbst heraus und bestelle bei metav-shop.de! Souverän prüfen über Kante zu Kante 0–500mm Messbereich bedeutet: Bauteile dürfen ruhig größer sein, der Messfluss bleibt einfach. Längere Strecken, breite Auflager, weit auseinanderliegende Kanten – alles lässt sich direkt und nachvollziehbar prüfen. Ideal für Vorrichtungen, Formrahmen und Prüflehren, bei denen es auf wiederholbare Abstände und klare Bezugspunkte ankommt. Das Ergebnis: weniger Handgriffe, weniger Unterbrechungen, mehr Orientierung entlang der Linie – von der ersten Anlegekante bis zur letzten Kontrolle. Schauen Sie hier, wie wir die Messbereiche klassifiziert haben. Klassifizierung Messbereiche beim Messschieber. Verlässliche Präzision durch Fertigung nach weltweit gültigen Standards Unser Einbaumessschieber Metav IndustryLine wird vollständig nach den einschlägigen DIN-Normen gefertigt – sämtliche Materialien, Fertigungs- und Kalibrierverfahren entsprechen den Anforderungen der DIN 862. Damit sind Maßhaltigkeit und Wiederholgenauigkeit garantiert, Prüfzertifikate sind international kompatibel, und Audits oder Kundenfreigaben lassen sich deutlich schneller durchlaufen. Die DIN-Konformität sichert konstante Qualität, erleichtert die weltweite Einsetzbarkeit und stärkt das Vertrauen in jedes einzelne Messergebnis. Die Messwerkzeuge von Metav IndustryLine werden von unseren Profis für Messwerkzeuge empfohlen. Metav IndustryLine steht für hervorragende Messwerkzeuge zu einem annehmbaren Preis. Alle Messwerkzeuge werden nach der Produktion gestestet. Sie wissen nicht genau, ob dieses Werkzeug zu Ihrer Anwendung passt? Oder Ihnen fehlen noch wichtige technische Details? Kein Problem! Kontaktieren Sie uns – wir beraten Sie gerne. 📧 eMail: info@metav-werkzeuge.com ☎️ Telefon: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Spezifikationen: Marke: Metav IndustryLine Bezeichnung: Einbaumessschieber Bestellnummer: M218.458 Zahlen zum Werkzeug: Messbereich: 0-500mm Gewicht: 0,45kg Norm: DIN 862 Ablesung: 0,01mm Datenausgang: RB 5 Ablesung in Inch/Zoll: 0,0005 Genauigkeit: 0,05mm Länge: 630mm Besonderheiten Ausführung: digital Material: Messschiene aus Aluminium (30x7,9mm) Digitalanzeige: mit EIN/AUS-, mm/inch- und NULL-Taste Messsystem: kapazitiv senkrecht Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com Pflegehinweis - damit Sie lange etwas von Ihrem Einbaumessschieber von Metav IndustryLine haben: Einbaumessschieber leben viele Jahrzehnte, wenn du sie sauber, leicht eingeölt, korrekt gelagert und regelmäßig geprüft hälst. Vermeide aggressive Lösungsmittel oder dicke Ölschichten, wische nach jedem Einsatz mit einem fusselfreien Tuch nach, schütze die Führungen mit einem Mikrofilm aus Instrumentenöl (z. B. Starrett M-1), lagere das Werkzeug trocken in seinem Etui mit leicht geöffneten Messflächen – am besten mit einem Silicagel-Beutel – und überprüfe Nullpunkt, Messflächen und Gleitspiel nach ISO-Temperaturnorm (20 °C).
500mm Digital Einbaumessschieber waagerecht, 0,01mm, DIN 862 - Metav IndustryLine
Das 1989 gegründete Traditionsunternehmen für den Vertrieb von Messwerkzeugen steht mit seiner Eigenmarke Metav IndustryLine für hevorragende Messwerkzeuge zu einem hervorragenden Preis. HIGHLIGHTS waagerecht Messbereich: bis 500mm Ablesung: 0,01mm Material: Messschiene aus Aluminium (30x7,9mm) digitale Ausführung Datenausgang: RB 5 Reichweite, die den Takt hält 0–500mm geben dir den Spielraum, Maße über größere Distanzen zu vergleichen – quer über Baugruppen, entlang von Kanten und zwischen weit entfernten Bohrungen. Das verringert Wechsel, schont den Arbeitsfluss und bringt Ruhe in die Qualitätskontrolle. Besonders im Formen‑ und Vorrichtungsbau zahlt sich das aus: Maßketten bleiben nachvollziehbar, und kritische Abstände lassen sich direkt am aufgebauten Teil prüfen. Unsere Definition der EInteilung der Messbereiche. Klassifizierung Messbereiche beim Messschieber. Gefertigt nach weltweit gültigen Standards Unser Einbaumessschieber wird vollständig nach den einschlägigen DIN-Normen gefertigt – sämtliche Materialien, Fertigungs- und Kalibrierverfahren entsprechen den Anforderungen der DIN 862. Damit sind Maßhaltigkeit und Wiederholgenauigkeit garantiert, Prüfzertifikate sind international kompatibel, und Audits oder Kundenfreigaben lassen sich deutlich schneller durchlaufen. Die DIN-Konformität sichert konstante Qualität, erleichtert die weltweite Einsetzbarkeit und stärkt das Vertrauen in jedes einzelne Messergebnis. Die Premium Messwerkzeuge von Metav IndustryLine werden von unseren Profis für Messwerkzeuge empfohlen. Metav IndustryLine steht für hervorragende Messwerkzeuge zu einem annehmbaren Preis. Alle Messwerkzeuge werden nach der Produktion gestestet. Sind Sie sich nicht sicher, ob dieses Werkzeug Ihre Anforderungen erfüllt? Oder benötigen Sie ergänzende technische Daten? Kein Problem – wir stehen Ihnen gerne zur Verfügung. 📧 eMail: info@metav-werkzeuge.com, ☎️ Telefon: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Produktmerkmale für den digitalen Einbaumessschieber von Metav IndustryLine: Marke: Metav IndustryLine Bezeichnung: Einbaumessschieber Bestellnummer: M218.358 Zahlen: Messbereich: 0 bis 500mm Gewicht: 0,45kg Norm: DIN 862 Ablesung: 0,01mm Datenausgang: RB 5 Ablesung in Inch/Zoll: 0,0005 Genauigkeit: 0,05mm Länge: 630mm Ausführungen Ausführung: digital Material: Messschiene aus Aluminium (30x7,9mm) Anzeige: mit EIN/AUS-, mm/inch- und NULL-Taste Messsystem: kapazitiv waagerecht Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com Wichtige Aspekte beim Erwerb eines Messschiebers: Neben Genauigkeit und Messbereich spielen Zusatzfunktionen wie Datenausgang oder Messkraftkontrolle eine wichtige Rolle. Ein Messschieber mit sorgfältig kalibrierter Messkraft ist speziell für die Qualitätssicherung und die Nutzung in Laboren von Vorteil. Zusätzlich sollten man darauf Achten, ob man einen kalibrierten Messschieber braucht. Die Möglichkeit zur Kalibrierung besteht unmittelbar bei Entgegennahme; zur Sicherstellung der Prozessstabilität sollte regelmäßig jährlich neu kalibriert werden. Pflegehinweis - damit Sie lange etwas von Ihrem Messwerkzeug von Metav IndustryLine haben: Einbaumessschieber leben viele Jahrzehnte, wenn du sie sauber, leicht eingeölt, korrekt gelagert und regelmäßig geprüft hälst. Vermeide aggressive Lösungsmittel oder dicke Ölschichten, wische nach jedem Einsatz mit einem fusselfreien Tuch nach, schütze die Führungen mit einem Mikrofilm aus Instrumentenöl (z. B. Starrett M-1), lagere das Werkzeug trocken in seinem Etui mit leicht geöffneten Messflächen – am besten mit einem Silicagel-Beutel – und überprüfe Nullpunkt, Messflächen und Gleitspiel nach ISO-Temperaturnorm (20 °C).
500mm Digital Messschieber mit langem Messschnabel, 0,01mm, IP 67 - Microtech Metrology
Microtech Metrology aus der Ukraine steht seit dreissig Jahren für höchste Qualität und Innovation. In diesem Zeitraum hat die Firma mehr als 130 weltweite Patentanmeldungen registriert.. Das wichtigste auf einen Blick für Messschieber mit langem Messschnabel Messbereich: bis 500mm Ablesung: 0,01mm digitale Ausführung Datenausgang: Wireless Mehr Überblick auf langen Strecken0 bis 500mm Mit einem Messbereich von 0–500mm bleiben selbst ausgedehnte Werkstücke überschaubar. Große Flächen, lange Kanten und weit gesetzte Bohrungen lassen sich strukturiert abfahren, ohne das Bauteil zu drehen oder umzusetzen. Das erleichtert das Prüfen von Formplatten, Trägern, Profilen und Rahmenbauteilen im Vorrichtungs‑ und Formenbau. Der Vorteil zeigt sich im Ablauf: Du bleibst im Takt, behältst den Bezug und kommst schneller zu belastbaren Ergebnissen. Schauen Sie hier, wie wir die Messbereiche klassifiziert haben. Klassifizierung Messbereiche beim Messschieber. Expertentip: Was ist bei der Reinigung der Messschenkel wichtig? Ein Fussel- oder Ölfilm von wenigen µm reicht, um Zehntel mm zu verfälschen. Deshalb vor jeder Messung die Messflächen mit einem fusselfreien Tuch abwischen. Informationen zur technischen Ausstattung: Marke: Microtech Metrology Bezeichnung: Messschieber Bestellnummer: 141073595 Daten: Messbereich: 0-500mm Schnabellänge: 300mm Ablesung: 0,01mm Datenausgang: Wireless Genauigkeit: 0,04mm IP-Schutz: IP 67 mit ISO 17025 Kalibrierzertifikat Querschnitt: 23x6mm Besonderheiten Ausführung: digital Anzeige: Swiss electric Digit Höhe 14mm Messsystem: ABS mit langem Messschnabel Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com
500mm Digital Outside Caliper Flat Jaw 100mm Beak, Stainless Hardened Metal Housing, mm/inch, Data Output RB2, Case - Metav IndustryLine
Take advantage of the combination of robust construction, a 500 mm measuring range and a clear digital display for efficient dimensional control in the workshop; order directly via Metav Werkzeuge or contact our consultants for further technical guidance. Digital external caliper M240.055 — 500 mm range, 100 mm flat jaws (Metav IndustryLine) The Digital external caliper M240.055 is a medium‑range digital caliper designed for reliable external and recessed measurements, featuring a 500 mm span and 100 mm flat‑tipped jaws for extended reach. 500 mm measuring range 0.01 mm digital resolution Hardened stainless steel construction Supplied in protective transport case Precision and reach for workshop measurement This instrument combines a 500 mm measuring range with a standard 0.01 mm digital resolution, delivering a balance between reach and fine detail suited to general workshop and toolroom use. Classified as a medium‑range caliper (300–500 mm), it offers an optimal compromise of stiffness and handling for components such as housings, fixtures and medium‑sized assemblies. The bright digital readout supports mm/inch switching and absolute/incremental modes, helping to reduce reading errors and speed up repetitive checks. Robust design for repeatable results Manufactured from hardened stainless steel, the frame and jaws resist wear while maintaining measurement stability; the metal housing protects the electronics in daily use. The flat‑tipped jaws with a 100 mm length reach into slots and recesses more easily than standard short jaws, allowing reliable external and groove contact where extended jaw engagement is required. Delivery in a protective transport case ensures secure handling between sites and reduces the risk of transit damage. Digital features and data handling for quality workflows The caliper’s digital electronics include ON/OFF, mm/inch conversion, ABS/INC and 0/PRESET keys for rapid setup and conversion between measuring strategies. A dedicated RB 2 data output is provided for straightforward transfer of measured values to data collectors or inspection systems, simplifying documentation and statistical process control. The combination of clear digital feedback and an interface for data capture supports efficient integration into modern quality routines. For a dependable medium‑range measurement solution, contact Metav Werkzeuge to discuss the Metav IndustryLine M240.055 and its suitability for production or inspection tasks; technical advisors in Emmerich are available to provide further specification and ordering guidance. Technical data Article number: M240.055 GTIN: 4054469112701 Data output: RB 2 Display functions: ON/OFF, mm/inch, ABS/INC, 0/PRESET Digital: yes Facts Measuring range: 0–500 mm Resolution: 0.01 mm / 0.0005 in Jaw length: 100 mm Tariff number: 90173000 Special features Material: hardened stainless steel Housing: metal Supplied in protective transport case for transport Flat‑tipped jaws for extended reach Digital readout with preset and absolute/incremental modes Category: caliper, medium range (300–500 mm) FAQ What resolution and units does the caliper support? The M240.055 provides a resolution of 0.01 mm and can display readings in millimetres or inches (0.0005 in), with selectable absolute and incremental modes for flexible measurement workflows. Is the jaw geometry suitable for measuring grooves and slots? Yes. The flat‑tipped jaws with a 100 mm length are configured to reach into recesses and narrow slots, allowing secure contact for external and shallow groove measurements with improved accessibility. Can measurement values be exported to a PC or data logger? The instrument is equipped with an RB 2 data output to facilitate transfer of readings to compatible data collectors or inspection systems, streamlining documentation and process control. Is the caliper delivered with protective packaging? The caliper is supplied in a protective transport case to prevent damage during shipping and handling, ensuring the tool arrives ready for workshop use. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
500mm Digital Precision Caliper Flush-Mount Capacitive System, Large Body, DIN 862 - Metav IndustryLine
High-resolution capacitive sensing combined with a 500 mm measuring range and a corrosion‑resistant stainless housing delivers dependable medium‑format measurements for fixtures and components; the instrument is supplied with standard digital functions and an RB 2 data output for integration. Order the M218.158 directly via Metav Werkzeuge or consult Metav’s specialists for application support. M218.158 Digital built-in caliper, 500 mm — capacitive measuring, stainless housing (Metav IndustryLine) The M218.158 is a built‑in digital caliper for horizontal mounting, engineered for medium‑range precision measurement tasks in machine shops, jigs and fixtures, and quality control. Capacitive measuring system for stable readings 500 mm range for medium-size components Large housing with digital mm/inch and preset functions Reliable mid-range precision for production measurement The instrument combines a 500 mm measuring range with a capacitive measuring system, offering stable readings across medium‑sized components where both reach and rigidity matter. The device meets DIN 862 requirements and is designed for horizontal installation into machine tables or fixtures, which simplifies repeatable integration into production processes. With a resolution of 0.01 mm and a specified accuracy of 0.05 mm, the caliper provides clear numeric evidence for routine production checks and in‑process control, making it suitable for workshop standard measurements and QA tasks where robustness and repeatability are required. Practical digital functions that speed up inspection Built‑in electronics include a digital display with on/off, mm/inch, ABS/INC, and ZERO/PRESET keys, enabling quick unit changes and reference resets on the shop floor. The capacitive sensor reduces mechanical wear compared with older contact systems and keeps maintenance demands low, while the RB 2 data output allows direct capture of measurements for SPC or machine‑side logging. The combination of a large display housing and standard digital interfaces supports faster inspection cycles and reduces manual transcription errors, improving throughput and traceability in repetitive measurement tasks. Durability and workshop suitability for medium components Constructed for horizontal mounting and finished in stainless materials, the instrument resists corrosion in humid or oily environments common to metalworking shops. At approximately 1.4 kg, the unit strikes a balance between solidity and manageable handling during installation. As a medium‑class caliper (measuring range up to 500 mm), it bridges bench‑top gauges and long‑range instruments, offering sufficient stiffness for components such as housings, fixtures and medium assemblies without the complexity of large‑format systems. The housed electronics protect the readout and controls, providing a durable solution for daily use. For integration advice, delivery options and application suitability speak with Metav Werkzeuge in Emmerich—our specialists will advise on mounting, data capture and batch supply for the M218.158 digital built‑in caliper Technical data Article number: M218.158 GTIN: 4054469111797 Manufacturer: Metav IndustryLine Label: Digital built‑in caliper, 500 mm, horizontal, stainless Standard: DIN 862 Facts Measuring range: 0–500 mm Resolution: 0.01 mm Inch resolution: 0.0005 in Accuracy: 0.05 mm Weight: 1.4 kg Tariff number: 90173000 Special features Capacitive measuring system Digital display with mm/inch, ABS/INC, ZERO/PRESET RB 2 data output for digital integration Large housing for clear readout and secure mounting Horizontal mounting orientation, stainless construction FAQ What accuracy can be expected in routine use? The stated accuracy for the M218.158 is 0.05 mm; combined with the 0.01 mm resolution the instrument suits standard workshop quality checks and in‑process control. Can the display switch between metric and imperial units? Yes, the readout supports mm/inch toggling via the dedicated key, offering fast unit changes for mixed‑standard applications. Is the caliper ready for digital data capture with inspection software? The unit is fitted with an RB 2 data output, enabling connection to compatible data loggers or SPC systems for automatic measurement recording. Which installation orientation is supported by this caliper? This model is designed for horizontal mounting and features a large housing to ease integration into fixtures and machine tables. Is the M218.158 suitable for a harsh workshop environment? The caliper has a stainless housing and a robust capacitive system, making it resistant to typical shop floor conditions and suitable for regular workshop use. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
500mm Digital Precision Caliper Vertical Stainless Steel, Capacitive System, DIN 862 - Metav IndustryLine
Take advantage of the combination of a 500 mm measuring range, a capacitive digital system and DIN 862 compliance for reliable in‑line measurement and straightforward integration; order the unit via Metav Werkzeuge or consult our specialists for system adaptation. Metav IndustryLine Digital built-in caliper M218.258 — 500 mm, capacitive The Digital built-in caliper M218.258 is a vertical, stainless digital caliper designed for medium‑range workshop and machine integration, offering precise, repeatable measurements for components up to 500 mm. 500 mm measuring range for larger components Capacitive digital system with mm/inch toggle Bidirectional measurement capability Compliant with DIN 862 standard Accurate reach for medium assemblies and jigs This caliper falls into the medium range category (measuring range up to 500 mm), which delivers the best compromise between reach and stiffness when inspecting larger assemblies, fixtures or housings. The 0.01 mm resolution provides clear, digital read‑out detail, while the declared ±0.05 mm accuracy gives a predictable error band for routine quality control. These characteristics make the instrument suitable for production checks where traceable, repeatable readings are required without the complexity of sub‑micron laboratory devices. Reliable digital output for traceable workflows Equipped with a capacitive measuring system and a multifunction display, the unit simplifies data capture and process control. The display includes ON/OFF, mm/inch, 0/ABS, TOL, DIR and HOLD functions to support quick mode changes on the shop floor. Data export is provided via RB 5 for integration into SPC and machine control systems, reducing manual transcription and enabling fast feedback loops. The result is a measurable reduction in non‑value time and a more efficient inspection routine. Built for shop‑floor durability and reproducibility The vertical, stainless design supports installation in embedded or built‑in applications where space and orientation are constrained. Bidirectional measurement capability ensures consistent readings whether approaching a dimension from positive or negative travel, improving reproducibility across operators. Compliance with DIN 862 underlines the caliper’s conformity to recognised mechanical standards, and the unit’s construction focuses on longevity and stable performance in industrial environments. Contact Metav Werkzeuge to specify the Metav IndustryLine M218.258 for system integration and supply from Emmerich; our consultants can advise on mounting and data‑capture options. Technical data SKU: M218.258 GTIN: 4054469111896 Manufacturer: Metav IndustryLine Standard: DIN 862 Facts Measuring range: 0–500 mm Resolution: 0.01 mm Resolution (inch): 0.0005 in Declared accuracy: ±0.05 mm eClass: 21170344 HS tariff number: 90173000 Special features Capacitive measuring system Digital display with ON/OFF, mm/inch, 0/ABS, TOL, DIR, HOLD Bidirectional measurement possible Data output: RB 5 Built for vertical, built‑in mounting FAQ What measuring range does this caliper cover? The Digital built‑in caliper M218.258 covers a measuring range of 0–500 mm, placing it in the medium‑range category for inspections of larger components and fixtures. What resolution and accuracy can be expected? The unit provides a 0.01 mm resolution and a declared accuracy of ±0.05 mm, suitable for standard workshop and production quality checks. Which data output is available for integration? Data output is provided as RB 5, enabling connection to compatible SPC systems and machine controllers for automated data collection. Is the caliper suitable for built‑in or vertical installation? Yes — the instrument is a built‑in, vertical design in stainless construction, intended for integration into machines, fixtures or dedicated measuring stations. Does the display support inch measurements and tolerance checks? The digital display includes an mm/inch toggle and TOL functionality, as well as 0/ABS and HOLD modes to support a variety of inspection workflows. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Precision calipers for accurate, repeatable measurement
Calipers are the indispensable length-measuring tools for industry and workshop environments, enabling fast and exact external, internal, depth and step measurements. Our professional range of precision calipers, including vernier calipers, dial calipers and digital calipers, combines mechanical robustness with modern data handling to support consistent quality assurance.
How these calipers work and where they help most
Analogue vernier calipers deliver reliable, autarkic operation via the vernier scale and are best suited to heavy-duty workshop use where durability matters. Digital calipers provide a contrast-rich display, minimise reading errors and speed up inspection routines through functions such as zero setting and data output. At the high end, touchscreen calipers from Microtech feature an integrated microcomputer, colour touch display, built-in error-tolerance checks and wireless data transmission, making them suited for Industry 4.0 workflows. Workshop calipers with extended measuring ranges offer optional fine adjustment and rounded tips for interior measurements, while in-built calipers can be mounted directly to machines or test rigs to monitor travel. Specialty calipers cover tasks such as deep grooves, pipe wall thickness, brake disc inspection, three-point measurements and bespoke geometries.
Tangible benefits that improve production performance
- Faster throughput: digital calipers with data output reduce manual entry and accelerate quality checks.
- Higher repeatability: robust mechanical design and error-tolerance controls raise measurement consistency.
- Flexible integration: wireless data transmission and touchscreen operation simplify digitisation to existing systems.
- Reduced downtime: workshop and in-built variants with fine adjustment minimise rework and set-up time.
- Application coverage: specialty calipers adapt to complex geometries, from three-point checks to deep-niche measurements.
Microtech and metav — quality and supply you can rely on
For high-end, touchscreen-equipped instruments, Microtech represents the technological benchmark thanks to its integrated controls and wireless capabilities. As a precision partner, Metav complements this with decades of experience and a comprehensive offering: more than 250,000 products, a European quality filter in Emmerich and the trust of over 48,000 customers, making Metav a sensible central source for calipers and measuring equipment.
Quick summary
Calipers — from analogue vernier to touchscreen digital — deliver the measurement accuracy and data connectivity modern production demands while reducing inspection time and improving repeatability.
FAQ
What are the main differences between analogue and digital calipers?
Analogue vernier calipers rely on a vernier scale and are prized for ruggedness and independence from power, whereas digital calipers provide a contrast display, zero setting and data output to eliminate readout errors and speed up quality processes.
Can calipers be integrated into a digital inspection workflow?
Yes. Many digital calipers and touchscreen models support data output and wireless data transmission, enabling direct transfer of measurements into quality-management systems or statistical process control.
Which caliper type is best for large measuring ranges in a workshop?
Workshop calipers with extended measuring ranges and optional fine adjustment are designed for large components; they maintain mechanical stability and are available with rounded interior jaws for safer internal measurements.
Are there calipers for specialised geometries like deep grooves or brake discs?
Specialty calipers are explicitly engineered for such tasks. They feature tailored measuring faces for deep-niche measurements, pipe wall thicknesses, brake-disc checks and three-point or flexible geometries.
How do touchscreen calipers from Microtech improve quality control?
Microtech touchscreen calipers combine an integrated microcomputer, colour touch display and built-in error-tolerance checks with wireless data transmission, allowing immediate verification, reduced human error and seamless digitisation in line with Industry 4.0 practices.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com