Precision calipers for reliable industrial measurement
Precision calipers and their variants provide fast, repeatable outside, inside, depth and step measurements to ensure component conformity and process control on the shopfloor, combining mechanical robustness with digital data handling for traceable results. Designed for use in industrial quality assurance and manufacturing, these calipers serve applications from rough workshop environments to precision inspection, with options such as analogue vernier calipers for durable, battery‑free operation and digital calipers offering clear displays and data output to speed up quality workflows. Specialist formats, including workshop calipers with extended ranges and built‑in mounting calipers for machine or fixture monitoring, extend capability to long strokes and embedded measurement tasks, while bespoke models handle deep grooves, pipe wall thicknesses and three‑point or other complex geometries. The range emphasises highest accuracy and process integration, featuring high‑end touchscreen models with integrated microcomputers, wireless data transfer and Industry 4.0 compatibility to modernise measurement and quality data capture.
400mm Workshop Caliper Without Point With Fine Adjustment Monoblock Stainless Steel Matt Chrome Scale - Metav IndustryLine
Combine robust hardened stainless steel construction with a 400 mm measuring range and precise fine adjustment to secure repeatable workshop measurements; order the caliper directly via Metav Werkzeuge or consult our specialists for application advice. Metav IndustryLine Workshop Caliper M201.324.3 — 400 mm range, fine-adjustment monoblock (analogue) The Workshop Caliper M201.324.3 is an analogue measuring instrument for workshop and production use, offering a 400 mm range with fine adjustment and a monoblock frame for reliable everyday measurement tasks. 400 mm measuring range for mid‑size assemblies Hardened stainless steel with matt‑chrome scale Fine‑adjustment screw for repeatable results Analogue vernier with 0.05 mm resolution Durable mid‑range solution for production measurement The instrument is designed as a mid‑range caliper (300–500 mm), giving the reach needed for larger fixtures and housings while remaining manageable for single‑person handling. Its monoblock construction and hardened stainless steel body reduce flexing over the travel, which translates into more reproducible readings and fewer rework cycles. The matt‑chrome scale improves legibility under workshop lighting and resists wear, helping to maintain a stable measuring baseline across repeated use. Precise analogue reading and controlled adjustment Equipped with an analogue vernier offering a reading step of 0.05 mm and an upper/lower vernier arrangement, the instrument supports reliable dimensional checks where digital displays are not required. The integrated fine‑adjustment screw allows the operator to approach the final measure slowly and lock the jaw position without disturbing the setup, reducing operator‑induced scatter and speeding up inspection loops in batch production. This combination supports efficient quality control and consistent part acceptance. Practical measuring modes and workshop compatibility Constructed for external, internal and step measurements, the caliper provides the essential functions for routine workshop inspection and set‑up work on machines and jigs. The delivered norm information notes compliance with DIN 862 for jaw lengths up to 200 mm, with factory standards applied for larger jaw configurations; this gives a clear baseline for traceability and acceptance in standard machine‑shop workflows. Robust materials and a straightforward mechanical layout favour low maintenance and long service intervals. Choose the Metav IndustryLine caliper when robustness and repeatable 400 mm measurement capability are essential, and contact Metav Werkzeuge in Emmerich for product matching and technical clarification via info@metav-werkzeuge.com or +49 2822 7131930. Technical data SKU: M201.324.3 GTIN: 4054469101484 Brand: Metav IndustryLine Facts Measuring range: 0–400 mm Resolution: 0.05 mm (analogue) Jaw length: 200 mm Vernier: 1/128" top and 1/20 mm bottom Tariff number: 90173000 Special features Material: hardened stainless steel, matt‑chrome scale Monoblock frame construction Fine‑adjustment screw included Analogue vernier instrument Conforms to DIN 862 for jaw lengths up to 200 mm FAQ What measuring range does this caliper cover? The caliper covers a measuring range of 0–400 mm, making it suitable for mid‑size workshop components and assemblies. How precise is the analogue reading on the instrument? The instrument provides an analogue resolution of 0.05 mm via the vernier scales, supported by the fine‑adjustment screw for controlled closure. Is the caliper suitable for internal and step measurements? Yes, the caliper is designed for external, internal and step measurements, providing the basic modes required in workshop inspection. What material and finish are used for durability? The body is made from hardened stainless steel with a matt‑chrome scale finish to resist wear and improve long‑term legibility. Does the caliper follow recognised standards? The product references DIN 862 for jaw lengths up to 200 mm, with factory standard procedures applied for larger jaw configurations Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
400mm Workshop Caliper Without Probe Fine Adjustment For External, Internal And Step Measurement, Hardened Stainless Steel In Case - Metav IndustryLine
Take advantage of a robust, hard-wearing instrument that combines precise 0.02 mm scale reading, a 400 mm measuring range and a fine‑adjustment mechanism for repeatable workshop results; order directly via Metav Werkzeuge or consult our specialists for application advice. Workshop Vernier Caliper M201.314 — 400 mm stainless, fine-adjustment The Workshop Vernier Caliper M201.314 is an analogue workshop caliper designed for reliable external, internal and step measurements in metalworking and general fixture work. 400 mm measuring range Hardened stainless steel body Fine-adjustment thumb screw Vernier reading to 0.02 mm Precise measurement where consistency matters The caliper delivers a 400 mm measuring range in a monoblock design that keeps the beam stiff and reduces bending during everyday use. The 0.02 mm scale division provides clearly defined increments for typical workshop tolerances, while the dual Vernier scales (top: 1/1000", bottom: 1/50 mm) support readouts that experienced operators can interpret quickly. For tasks that demand reproducible results — such as setup checks, incoming inspection of components or quick go/no‑go verifications — the instrument balances reach and rigidity so measurements remain reliable over long runs. Durable construction for a harsh workshop environment Manufactured from hardened stainless steel with a matt‑chromed scale, the caliper resists corrosion and wear that shorten tool life in aggressive environments. The jaw length 125 mm and a total weight of approximately 1.2 kg give a tactile sense of robustness without hampering one‑handed use. The integrated fine‑adjustment thumb screw enables controlled closing of the jaws, reducing the influence of operator pressure on the reading and helping to avoid repeated rework. For transport, the instrument is supplied in a protective case suitable for workshop logistics. Versatility that reduces tool stacking and cycle time Configured for external, internal and step measurements, this analogue caliper covers the most common measuring tasks on the shop floor and in jigs and fixtures. The absence of a pointed tip simplifies alignment on broad contact surfaces and reduces the risk of damage when measuring delicate parts. Where users need a single measuring tool to handle multiple checks, this instrument shortens process chains and reduces handling time, giving a measurable productivity advantage in repetitive operations. Practical benefits for production and maintenance teams The simple mechanical design minimises electronic failure modes and keeps maintenance straightforward, while the Vernier reading and visible scale make results immediately verifiable by visual inspection or cross‑checking. The caliper’s monoblock construction and hardened finish mean fewer calibration cycles caused by wear, and the fine‑adjustment control supports consistent measuring force for better repeatability. These characteristics result in lower overall measurement uncertainty and fewer costly adjustments on machines and fixtures. For hands‑on reliability from the Metav IndustryLine, contact Metav Werkzeuge for tailored advice and fast supply: info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M201.314 GTIN: 4054469101330 eClass: 21170344 Numbers / Core technical data Measuring range: 0–400 mm Resolution / scale division: 0.02 mm Jaw length: 125 mm Weight: 1.2 kg TARIC / customs code: 90173000 Special features / Versions Material: hardened stainless steel, matt‑chromed scale Monoblock construction Fine‑adjustment thumb screw Analogue vernier (top 1/1000", bottom 1/50 mm) For external, internal and step measurements Supplied in protective transport case Manufacturing standard: Werksnorm FAQ Is this caliper suitable for general metalworking tasks? The Workshop Vernier Caliper M201.314 is designed for general metalworking and workshop use, covering external, internal and step measurements across typical component sizes. What reading accuracy can be expected from the instrument? The scale division is 0.02 mm and the dual Vernier configuration supports precise analogue readings appropriate for routine workshop tolerances. Does the caliper come ready to use or is calibration required? The instrument is supplied ready for use; it follows the stated manufacturing standard (Werksnorm). A protective case is included for transport and storage. How does the fine‑adjustment help in daily use? The fine‑adjustment thumb screw enables controlled closing of the jaws, reducing variation from operator pressure and improving repeatability of the measure. Which materials and environments is the caliper built for? Constructed from hardened stainless steel with a matt‑chromed scale, the caliper resists corrosion and is suited to workshop environments where durability is required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
400mm Workshop Caliper, 125mm Jaws, 0.05mm Graduation, Rust‑Resistant Hardened Steel, Matt Chrome Scale, Case Included - Metav IndustryLine
Combine robust hardened stainless steel, precise fine-adjustment and a 400 mm measuring range for dependable workshop measuring. Order the Workshop Caliper M201.324.1 directly via Metav Werkzeuge or ask our consultants if needed. Workshop Caliper M201.324.1 — analogue monoblock caliper with fine-adjustment (Metav IndustryLine) The Workshop Caliper M201.324.1 is an analogue monoblock caliper designed for shop and fixture work, offering a 0–400 mm measuring range with a vernier resolution of 0.05 mm for reliable external, internal and step measurements. 0–400 mm measuring range Hardened stainless steel construction Fine-adjustment thumbwheel Monoblock design for rigidity Reliable performance for everyday workshop measurement The monoblock frame and hardened construction deliver consistent stability across the full measuring length. The monoblock construction reduces flex and improves repeatability when measuring larger components, which is particularly important in fixture and toolroom tasks where reproducible results speed up set-up and reduce rework. The integrated fine-adjustment allows controlled clamping of the jaws so that setting to a measurement is smooth and precise. Measuring system and accuracy explained Measurement is achieved via a traditional vernier arrangement with a top scale in inches and a bottom vernier in millimetres: 1/128" at the top and 1/20 mm (equivalent to 0.05 mm) at the bottom, providing clear, mechanical readout without electronics. The caliper is supplied according to the stated standard: DIN 862 applies for shorter jaws up to 200 mm, while lengths from 250 mm follow the manufacturer's factory standards. This combination gives a straightforward accuracy class suitable for robust shop use. Materials and long-term durability in harsh environments Made from hardened stainless steel with a matt‑chromed scale, the instrument resists corrosion and wear in routine industrial environments. The matt finish reduces glare and improves legibility under workshop lighting. The jaw length of 125 mm supports access into recesses and deeper features while the hardened surfaces keep the measuring faces true over extended service life, reducing the need for frequent replacement. Integration into the workshop and dealer support The analogue, mechanical design requires no batteries and is straightforward to maintain, making it a practical choice for production floors and service benches. Metav IndustryLine positions this caliper as a dependable shop tool within its metrology range; Metav’s distribution in Emmerich combines broad product availability with a quality filter for the European market, supporting reliable supply and replacement sourcing when required. For robust, repeatable measurements choose the Metav IndustryLine workshop caliper and contact Metav Werkzeuge in Emmerich for tailored advice at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: M201.324.1 GTIN: 4054469101460 Manufacturer: Metav IndustryLine Category: Calipers / Measuring instruments Facts Measuring range: 0–400 mm Jaw length: 125 mm Resolution: 0.05 mm (vernier 1/20 mm) Nonius: 1/128" (top), 1/20 mm (bottom) Customs tariff number: 90173000 Materials & special features Material: hardened stainless steel, matt‑chromed scale Monoblock construction Fine‑adjustment thumbwheel Analog vernier scale Conformity: DIN 862 up to 200 mm; factory standard from 250 mm FAQ Is this caliper suitable for heavy workshop use? The Workshop Caliper M201.324.1 from Metav IndustryLine is built as a robust shop instrument, with a monoblock frame and hardened stainless steel surfaces that withstand routine industrial handling. What measurement accuracy and resolution can be expected? The bottom vernier provides a resolution of 0.05 mm (vernier 1/20 mm); the mechanical design prioritises repeatability and durability for workshop-level precision. Which standards apply to this caliper? Shorter jaw configurations follow DIN 862; for the 400 mm version, the caliper is produced in line with the manufacturer's factory standard as indicated in the product specification. What types of measurements does it support? The analogue caliper covers standard external, internal and step measurements typical for workshop calipers, aided by the fine-adjustment thumbwheel for exact setting Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
400mm Workshop Precision Caliper With Pointed Jaws, Fine Adjustment, Monoblock, Hardened Stainless Steel - Metav IndustryLine
Take advantage of the combination of monoblock construction, a 400 mm measuring range and a precise fine-adjustment mechanism to secure reliable, repeatable measurements in the workshop. Order the caliper directly via Metav Werkzeuge or ask our consultants for specification support. Workshop caliper M201.334.1 — 400 mm analogue caliper with fine adjustment (Metav IndustryLine) The Workshop caliper M201.334.1 is a medium-range analogue caliper designed for robust shop-floor measurement of components up to 400 mm, featuring a fine-adjustment thumbwheel and hardened stainless-steel construction. 400 mm measuring range for larger components Hardened stainless steel with matt chrome scale Precise fine-adjustment mechanism Monoblock design with 125 mm jaws Dependable medium-range measurement for fixtures and assemblies This caliper is classified in the medium range (measuring range up to 500 mm), making it well suited to general machine‑shop tasks where reach and rigidity must be balanced. The 400 mm span covers typical assembly and component sizes while keeping the instrument manageable for single‑hand operation. The analogue vernier arrangement delivers the industrial standard resolution of 0.05 mm, enabling consistent checks during set‑up and in‑process control that reduce scrap and rework. Built for workshop durability and repeatability Constructed from hardened stainless steel with a matt‑chrome scale, the instrument resists corrosion and maintains legibility under regular use. The monoblock frame increases frame stiffness, so measurements remain reproducible over time and under routine handling. The extended 125 mm jaws provide firm support on deeper features, while the pointed tips allow access to narrow grooves and internal corners. The integrated fine-adjustment wheel ensures rapid, precise positioning of the slider for repeat readings without overshoot. Clear vernier reading and conformity to workshop standards The double vernier layout—top scale 1/128" and lower scale 1/20 mm—facilitates cross‑referencing imperial and metric increments and supports users familiar with both systems. As an analogue instrument the vernier accuracy aligns with the workshop norm of ±0.05 mm under typical conditions, consistent with DIN 862 for jaw lengths up to 200 mm. The mechanical layout is straightforward to read and maintain, making the tool reliable for routine dimensional checks and setup tasks without the need for batteries or electronic interfaces. Practical use and guidance for everyday measurement The instrument is intended for common tasks in metalworking and maintenance: external and internal diameter checks, step measurements and quick on‑machine verifications. Its robust construction tolerates everyday workshop environments while the fine‑adjustment feature speeds up repetitive tasks, improving throughput. For guidance on applying the caliper to specific parts or fixtures, Metav’s technical advisers can provide practical tips tailored to the application. For Metav IndustryLine quality with clear workshop benefits, contact Metav Werkzeuge in Emmerich for personalised advice or to place an order by phone or email. Technical data SKU: M201.334.1 GTIN: 4054469101705 Category: Messschieber Brand: Metav IndustryLine Measurements & accuracy Measuring range: 0–400 mm Jaw length: 125 mm Vernier resolution: 0.05 mm (1/20 mm) Accuracy classification: workshop standard ±0.05 mm Applicable standard: DIN 862 (for jaw length up to 200 mm) Design & special features Material: hardened stainless steel, matt‑chromed scale Monoblock frame construction Fine‑adjustment thumbwheel Pointed measuring tips for narrow features FAQ What is the measuring range of this caliper? The caliper offers a measuring range of 0–400 mm, which places it in the medium class suitable for larger workshop components. How accurate is the vernier on this analogue caliper? The vernier provides a standard workshop resolution of 0.05 mm and corresponds to typical DIN 862 expectations for mechanical calipers. Is the instrument suitable for internal and external measurements? Yes, the Workshop caliper M201.334.1 is designed for external, internal and step measurements, aided by its pointed tips and long jaws. What material is the caliper made from and how does that help in the shop? The body is made from hardened stainless steel with a matt‑chromed scale, offering corrosion resistance and robust durability for daily shop use. Does the caliper include any fine‑adjustment for repeatable readings? Yes, the caliper features a fine‑adjustment thumbwheel that allows controlled slider movement for repeatable positioning. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
400mm Workshop Precision Caliper Without Probe Fine Adjustment Monoblock Hardened Stainless Steel 0.05mm Vernier, DIN 862 - Metav IndustryLine
Take advantage of a robust monoblock design and precise 0–400 mm measuring range paired with a reliable fine adjustment — ideal for repeatable workshop measurements. Order the instrument directly via Metav Werkzeuge or consult the Metav team for guidance on integrating this caliper into existing quality routines. Workshop Caliper M201.324.2 — 0–400 mm stainless steel, fine adjustment (Metav IndustryLine) Workshop Caliper M201.324.2 is a durable analogue caliper built for accurate, repeatable measurements in industrial and workshop environments up to 400 mm. Monoblock stainless hardened construction Fine adjustment for controlled, repeatable setting Nonius: 1/128" top and 1/20 mm bottom scale Delivered in protective transport case Precision and robustness where it matters The 0–400 mm measuring range classifies this instrument in the Medium (300–500 mm) category, which is sized to handle larger assemblies while remaining manageable for single-person tasks. Constructed from hardened stainless steel with a matt‑chromed scale, the caliper resists corrosion and maintains legibility under workshop conditions. The monoblock frame increases profile stiffness, reducing deformation over the measuring length and improving reproducibility of external and internal measurements in routine production checks. Controlled setting for reliable readings Equipped with a fine adjustment mechanism, the caliper allows the operator to close the jaws smoothly and consistently, reducing variability that typically arises from manual nudging. The analogue nonius layout combines a 1/128" scale on the upper edge with a 1/20 mm scale on the lower edge, yielding a readable mechanical resolution of 0.05 mm, which corresponds to the common industrial performance class for workshop calipers. This format is familiar to experienced users and straightforward to interpret during incoming inspection or set‑up checks. Practical design for everyday workshop use A 150 mm jaw length provides sufficient reach for many workpieces while keeping the instrument compact enough for tight fixtures. The matt finish on the scale reduces glare under bright workshop lighting, aiding quick, error‑free readings. Delivery includes a protective transport case, facilitating safe storage and travel between workstations or job sites, and helping to preserve calibration and surface condition over time. Ready for quality workflows and standards Manufactured to comply with DIN 862 for jaw lengths up to 200 mm, this analogue caliper integrates easily into standard QC procedures and documentation practices. The combination of hardened material, a robust monoblock body and fine adjustment supports consistent measurement throughput, making the instrument a practical choice for workshops that require dependable metrology without the overhead of digital data systems. For a dependable workshop caliper with fine adjustment, contact Metav Werkzeuge to request the Metav IndustryLine Workshop Caliper M201.324.2 — eMail: info@metav-werkzeuge.com, Tel: +49 2822 7131930 Technical data Article number: M201.324.2 GTIN: 4054469101477 ECLASS: 21170344 Tariff number: 90173000 Facts Measurement range: 0–400 mm Resolution: 0.05 mm (mechanical) Jaw length: 150 mm Nonius: 1/128" (top) / 1/20 mm (bottom) Conforms to DIN 862 for jaw length ≤ 200 mm Special features Material: hardened stainless steel, matt‑chromed scale Monoblock construction for increased stiffness Fine adjustment for controlled closing Analogue nonius scale (no electronic data output) Delivered in a protective plastic or wooden transport case Classified: Medium (300–500 mm) measurement range FAQ Is the caliper supplied ready for immediate use? The Workshop Caliper M201.324.2 is delivered ready for measurement; routine verification is recommended before critical inspections. What accuracy can be expected from this analogue caliper? With a mechanical resolution of 0.05 mm and the specified nonius scales, the caliper meets the typical workshop accuracy class suitable for general machine‑shop and metalworking tasks. Can the instrument be used for internal and external measurements? Yes, the design of the caliper supports external and internal measurements as well as step measurements, consistent with standard analogue caliper functionality. Does the caliper conform to recognised standards? The device is manufactured in accordance with DIN 862 for jaw lengths up to 200 mm and follows the manufacturer’s norms for longer configurations. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
40mm Groove Measuring Insert Flat Measuring Face 8×4×0.5mm For Digital Uni Caliper Series 240.201–240.204 - Metav IndustryLine
Take advantage of a slim, purpose-made measuring insert that combines a flat measuring face with corrosion‑resistant construction and direct compatibility with the Digital‑Uni caliper series 240.201–240.204; order supply or request advice through Metav Werkzeuge for fast technical support. M240.261 — Measuring insert for groove measurement, flat measuring face, 40 mm (Metav IndustryLine) The M240.261 is a 40 mm stainless steel measuring insert designed for precise groove measurement on Digital‑Uni calipers series 240.201–240.204, offering a flat contact surface and slim profile for narrow access. Flat measuring face for parallel contact Slim profile for confined grooves Stainless steel, corrosion‑resistant Accurate groove measurements where space is limited The slim measuring tip and flat measuring face provide a reliable contact geometry for narrow grooves and shoulder features, reducing measurement scatter and supporting repeatable readings. With a contact area of 8×4×0.5 mm, the insert stabilises the probe-to-workpiece interface and helps produce consistent results when checking slot widths or internal recesses. This focused design is particularly useful in routine workshop inspections and small-series quality control, where efficient, verifiable measurements increase throughput without compromising traceability. Robust material and low maintenance for daily use Constructed from stainless steel, the insert resists corrosion and wear in typical shop environments, which reduces downtime for replacement and maintenance. The solid build and compact 40 mm length deliver a stable feel during handling while remaining light at 0.1 kg, easing repetitive use. These attributes translate into lower total cost of ownership through fewer tool changes and reliable long‑term service life in metalworking and assembly contexts. Seamless integration with Digital‑Uni calipers to speed workflows Engineered for direct fitment to the Digital‑Uni caliper series 240.201–240.204, the insert simplifies tool swaps and reduces setup time on the shop floor. Compatibility with the caliper family ensures measured values remain traceable within existing metrology equipment chains and allows teams to maintain a consistent measuring strategy across different stations. The short installation time and standardised interface support lean inspection processes and quicker decision cycles. Practical handling and application benefits At 40 mm overall length and with a narrow contact geometry, the insert reaches into grooves, steps and recesses that standard jaws cannot access, facilitating internal measurements without complex fixtures. The modest dimensions and corrosion‑resistant surface make cleaning and visual inspection straightforward, aiding calibration routines and keeping inspection intervals efficient. Marked repeatability and the clear contact specification help technicians interpret results with confidence and document quality checks for audits. Choose the Metav IndustryLine M240.261 for dependable groove measurements and contact Metav Werkzeuge in Emmerich for technical advice or to arrange supply at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M240.261 SKU: M240.261 GTIN: 4061905053863 Manufacturer: Metav IndustryLine Facts Measuring face: 8 x 4 x 0.5 mm Length: 40 mm Weight: 0.1 kg Special features Flat measuring face For groove measurement and internal recesses Compatible with Digital‑Uni calipers series 240.201–240.204 Corrosion‑resistant stainless steel construction FAQ How does the insert fit the caliper? The M240.261 is designed for direct compatibility with Digital‑Uni calipers (series 240.201–240.204) and connects via the caliper’s accessory interface for straightforward installation. What are the contact area dimensions? The measuring face measures 8 x 4 x 0.5 mm, providing a defined, flat contact for groove checks with the M240.261 insert. Is the insert suitable for use in humid or oily environments? Yes — the stainless steel construction of the insert offers corrosion‑resistant properties that make it suitable for typical workshop and production environments. Can this insert access very narrow slots? The slim profile and 40 mm length enable access into confined grooves and recesses where standard jaws are unsuitable, supporting internal groove and step measurement tasks. Is the insert repeatable for quality control tasks? The flat contact geometry and defined measuring face support repeatable readings, making the insert appropriate for routine inspection and traceable quality checks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
42mm Precision Caliper Outside Measuring Insert 7x4mm Ball Tip, 70mm Length - Metav IndustryLine
Take advantage of the combination of a ball-ended measuring face, a defined Ø4 mm contact and 70 mm reach to achieve reproducible external measurements; the stainless steel construction adds corrosion resistance for reliable workshop use. Order the part directly via Metav Werkzeuge or ask our consultants for compatibility details. M240.232 External measuring jaw insert — ball-ended Ø4 mm, 70 mm reach (Metav IndustryLine) The M240.232 external measuring jaw insert is an accessory for extending the external measuring capability of Digital Uni calipers, providing a ball-shaped contact for precise measurements from 42 mm and above on the associated caliper series. Ball-ended contact for defined contact point Ø4 mm contact diameter for small features 70 mm reach for extended measuring access Stainless steel for corrosion resistance Defined contact for reproducible external measurements The ball-shaped contact provides a defined contact that reduces variability when measuring edges or slightly curved surfaces. With a Ø4 mm contact diameter and a clear single-point interface, the insert gives repeatability that is superior to blunt or uneven contacts; this helps to reduce measurement scatter during routine quality checks and supports faster decision-making on shop-floor tolerances. The measured contact geometry also minimises indentation on softer finishes, preserving part integrity. Robust design that extends caliper functionality without compromise Made from stainless steel, the insert resists corrosion and stands up to regular workshop handling. The 70 mm reach of the measuring face adds measurable access without compromising stiffness, making the component suitable when the standard jaws cannot reach recessed features. Compatibility with the Digital Uni Calipers series 240.201–240.205 allows a straightforward retrofit: the part extends existing instruments with a reliable, metal contact that keeps calibration intervals predictable and maintenance simple. Practical benefits for production and inspection workflows Fitting the insert increases the versatility of a single caliper, reducing the need for multiple specialised gauges and supporting leaner toolsets in inspection stations. The defined ball contact improves measurement confidence on edges, grooves and rounded profiles, which is particularly useful in small-batch production or repair work where repeatable checks are essential. For queries about fitment or to ensure the right configuration for a particular application, Metav’s technical team is available to advise on integration and best practice handling. Contact Metav Werkzeuge for bespoke advice on integrating the M240.232 into existing calipers and to confirm compatibility with specific measuring tasks; consultants in Emmerich will assist with technical details and dispatch options. Technical data Article number: M240.232 GTIN: 4061905053771 Material: stainless steel Weight: 0.08 kg Compatible with: Digital Uni Calipers series 240.201–240.205 Contact diameter: 4 mm Measuring face length: 70 mm Facts Contact diameter: 4 mm Measuring face length: 70 mm Weight: 0.08 kg SKU: M240.232 Special features Ball-shaped measuring face For external measurements from 42 mm Stainless steel construction Designed for retrofit to caliper series 240.201–240.205 FAQ How does the ball-ended face affect measurement results? The ball-ended face on the M240.232 creates a single, defined contact point that improves repeatability and reduces surface indentation compared with flat contacts, making it suitable for edges and slightly curved profiles. Which calipers are compatible with this insert? This insert is designed for the Digital Uni Calipers series 240.201–240.205 and is supplied as SKU M240.232 for direct identification during ordering. What material is used for the measuring face and how durable is it? The M240.232 is manufactured from stainless steel, offering corrosion resistance and mechanical robustness for routine workshop use. From which internal dimension can this insert be used for external measurement? The measuring jaw is intended for external measurements starting at an internal reference of 42 mm on the corresponding caliper configuration. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
430mm Digital Einbaumessschieber waagerecht, 0,01mm, DIN 862 - Metav IndustryLine
Die außerordentlichen Bewertungen von Metav Werkzeuge stehen für 42.000 hochzufriedene Kunden. Probiere es aus und shoppe auf metav-shop.de.! MESSBEREICH} mm – von der Vorbereitung bis zur Freigabe Der Messbereich von 0 – 300mm bietet spürbare Freiheit bei typischen Bauteilgrößen. Übergänge von grober Kontrolle zu feiner Prüfung gelingen ohne Bruch im Ablauf. Im allgemeinen Maschinen- und Metallbau erweist sich dieser Bereich als tragfähige Basis für konstante Ergebnisse. Die Arbeit bleibt flüssig, weil die relevanten Dimensionen im direkten Zugriff sind. Das schafft Sicherheit in jeder Projektphase. Schauen Sie hier, wie wir die Messbereiche klassifiziert haben. Klassifizierung Messbereiche beim Messschieber.. Immer die richtige Toleranz nach DIN 862 Verlassen Sie sich auf Präzision, die weltweit Standards setzt: Unser Einbaumessschieber erfüllt die Anforderungen der DIN 862 in jedem Detail – von der Materialauswahl über die Fertigung bis hin zur Kalibrierung. Damit garantieren wir exakte Messergebnisse, internationale Zertifikate und höchste Akzeptanz bei Audits und Kundenabnahmen. Qualität, der Sie vertrauen können. Expertenhinweis: Führe Messungen immer unter gleichen Bedingung aus. Im Idealfall im einem Messlabor, das 20° Celsius vorhält. Sie sind unsicher, ob das Werkzeug zu Ihrer Anwendung passt?? Oder es fehlen Ihnen noch technische Daten?? Kein Problem, sprechen Sie uns an!! 📧 eMail: info@metav-werkzeuge.com ☎️ Telefon: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Produktdetails für den digitalen Einbaumessschieber von Metav IndustryLine: Marke: Metav IndustryLine Bezeichnung: Einbaumessschieber Bestellnummer: M218.356 Zahlen & Fakten: Messbereich: 0 bis 300mm Gewicht: 0,35kg Norm: DIN 862 Ablesung: 0,01mm Datenausgang: RB 5 Ablesung in Inch/Zoll: 0,0005 Genauigkeit: 0,04mm Länge: 430mm Ausführungen Ausführung: digital Material: Messschiene aus Aluminium (30x7,9mm) Anzeige: mit EIN/AUS-, mm/inch- und NULL-Taste Messsystem: kapazitiv waagerecht Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com Worauf es beim Messschieberkauf ankommt: Neben Genauigkeit und Messbereich spielen Zusatzfunktionen wie Datenausgang oder Messkraftkontrolle eine wichtige Rolle. Der Einsatz eines Messschiebers mit kontrollierter Messkraft ist besonders in der Qualitätssicherung und in Laborumgebungen vorteilhaft. Ebenfalls beachtenswert ist, ob ein Bedürfnis nach einem kalibrierten Messschieber besteht. Bereits bei der Zustellung ist eine Kalibrierung möglich, und für die Garantie der Prozesssicherheit sollte diese jährlich wiederholt werden. Pflegehinweis - damit Sie lange etwas von Ihrem Einbaumessschieber von Metav IndustryLine haben: Einbaumessschieber leben viele Jahrzehnte, wenn du sie sauber, leicht eingeölt, korrekt gelagert und regelmäßig geprüft hälst. Vermeide aggressive Lösungsmittel oder dicke Ölschichten, wische nach jedem Einsatz mit einem fusselfreien Tuch nach, schütze die Führungen mit einem Mikrofilm aus Instrumentenöl (z. B. Starrett M-1), lagere das Werkzeug trocken in seinem Etui mit leicht geöffneten Messflächen – am besten mit einem Silicagel-Beutel – und überprüfe Nullpunkt, Messflächen und Gleitspiel nach ISO-Temperaturnorm (20 °C).
435x175x20mm Wooden Case With Foam Insert For Calipers Up To 400mm - Metav IndustryLine
Take advantage of a robust storage solution that combines a wooden construction, protective foam insert and precise internal dimensions for calm handling of measuring tools; order the case directly via Metav Werkzeuge or contact specialists for procurement advice. Wooden case for calipers M836.416 — foam-lined protective box for workshop storage A wooden case for calipers M836.416 that protects measuring instruments during transport and storage while keeping a compact footprint suitable for bench and drawer organisation. Protective wooden case with foam insert Fits calipers up to 400 mm Compact external size 435 x 175 x 20 mm Durable storage for workshop transport Secure protection for precision tools and repeatable results The wooden case with a tailored foam insert provides reliable mechanical protection for sensitive measuring instruments, reducing shock and abrasion during handling. The snug interior prevents lateral movement and preserves calibration by avoiding repeated contact between measuring faces and external surfaces. For workshop routines this means fewer interruptions for cleaning or adjustments and a lower risk of accidental damage to measuring equipment. Designed for mid‑range calipers — organised and ready to use Sized to fit calipers up to 400 mm, this case places associated instruments in the medium measuring‑range category typically used in fixture and mould work. The 435 x 175 x 20 mm external dimensions allow simple drawer storage or rack placement while maintaining sufficient clearance for common 150–300 mm models and larger 400 mm types. This balance of reach and handling supports efficient inspection workflows and easier tool access during production tasks. Practical handling and workshop resilience Constructed from wood with an integrated foam insert, the box offers a practical combination of sturdiness and lightweight handling that suits regular transport between benches or jobsites. The natural material gives moderate impact resistance and is simple to label for inventory control. The compact profile supports standard storage systems and reduces the footprint of measuring equipment without compromising the protection required for routine industrial use. Choose the Metav IndustryLine wooden case M836.416 to safeguard calipers during storage and transport — contact Metav Werkzeuge for supply details or tailored advice from Emmerich. Technical data Article number: M836.416 Label: Holzetui 435x175x20mm für Messschieber Material: Wood with foam insert Suitable for calipers up to 400 mm Facts Max. caliper range: 400 mm External dimensions: 435 x 175 x 20 mm Special features Foam-lined interior for instrument protection Compact design for drawer and bench storage Suitable for workshop and transport use Manufacturer brand: Metav IndustryLine FAQ Is this case suitable for a 150 mm dial caliper? Yes. The wooden case M836.416 accepts calipers up to 400 mm and therefore accommodates standard 150 mm dial or digital calipers with room for safe placement. Will the foam insert protect against shocks during transport? The foam insert in the Metav IndustryLine case reduces lateral movement and abrasion, providing basic shock protection appropriate for workshop transit and storage. Can the case be stored in a standard tool drawer? With external dimensions of 435 x 175 x 20 mm, the case is shaped to fit common bench and drawer systems while keeping measuring tools readily accessible. Is this box suitable for long-term storage of precision calipers? The wooden case and foam lining offer physical protection for long‑term storage; periodic checks of the instrument are still recommended to ensure calibration integrity. What is the article number for ordering or reference? The article number is M836.416 and it is listed under the Metav IndustryLine range for workshop measuring accessories. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
44mm Interior Measuring Insert Flat 10 x 1.5mm Faces L80 For Digital Uni Caliper Series 240.201-240.205 - Metav IndustryLine
Taking advantage of a flat measuring face (10 x 1.5 mm) and a compact stainless steel body, this internal measuring insert delivers precise groove and recess checks from 44 mm internal diameter; order the M240.215 insert directly via Metav Werkzeuge or consult our technical team for application guidance. M240.215 internal measuring insert for Digital‑Uni calipers — flat measuring face 10 x 1.5 mm M240.215 is an internal measuring insert designed for precise groove and recess measurement, compatible with the Digital‑Uni caliper series 240.201–240.205. Flat measuring face 10 x 1.5 mm for groove checks Internal measurement from 44 mm onward Stainless steel construction for corrosion resistance Compatible with Digital‑Uni calipers series 240.201–240.205 Accurate groove measurement for quality assurance The insert provides a flat measuring face that is 10 x 1.5 mm, specifically shaped to access narrow grooves and slots with repeatable contact. By concentrating the contact area, the design reduces tilting and measurement scatter, which translates into more consistent internal diameter readings. This targeted geometry benefits workshop and production environments where quick verification of recesses is required without swapping to specialist gauges. Durable stainless‑steel design for reliable results Manufactured from stainless steel, the insert resists corrosion and maintains its geometry through frequent use. The material choice supports stable thermal behaviour and eases cleaning after exposure to cutting fluids or shop contaminants, thereby safeguarding long‑term accuracy. With a compact mass of 0.1 kg and robust construction, the accessory remains rigid during measurement, helping to reduce operator‑induced variability and maintain process control. Fast integration into existing caliper workflows Engineered for straightforward mounting on the Digital‑Uni calipers (series 240.201–240.205), this insert simplifies tool changes and minimises downtime. The insert’s 80 mm active length and compatibility mean the caliper can be adapted quickly from external to internal groove measurement without additional instruments, supporting a more efficient inspection routine and a reduced error budget. This integration supports lean inspection flows and helps keep throughput steady. For precise groove and recess checks, request the M240.215 internal measuring insert from Metav Werkzeuge in Emmerich or get tailored advice from our technical consultants via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M240.215 SKU: M240.215 GTIN: 4061905053726 Material: stainless steel Facts Weight: 0.1 kg Overall length: 100 mm Measuring face: 10 x 1.5 mm Insert active length L: 80 mm Internal measurement from: 44 mm Special features Compatibility: Digital‑Uni calipers series 240.201–240.205 Application: groove and recess measurement Construction: flat measuring face for stable contact Finish: corrosion‑resistant stainless steel FAQ Is this insert suitable for measuring narrow grooves? Yes. The M240.215 insert features a flat measuring face (10 x 1.5 mm) that is specifically intended for groove and slot measurement, allowing stable contact and repeatable internal readings. Which calipers does the insert fit? The insert is compatible with the Digital‑Uni caliper series 240.201–240.205 and mounts to those units to enable internal groove and recess checks without additional adapters. What material is the insert made from and why does that matter? The insert is made from stainless steel, chosen for corrosion resistance and dimensional stability; this supports long‑term accuracy under normal workshop conditions. From what internal diameter can this insert be used? The design allows internal measurement from 44 mm onwards, making it suitable for medium‑sized bores, recesses and grooves within that range. Can this insert be used for external measurements? This accessory is designed for internal applications; external measurement capability is provided by the caliper body when fitted with the standard external jaws. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
44mm Internal Measuring Insert 10×2mm Pin Measuring Faces L80 For Digital Uni Caliper Series 240.201-240.205 - Metav IndustryLine
Take advantage of the precise pin geometry and robust stainless steel construction for reliable groove and bore measurements; compatible with the Digital‑Uni caliper series for quick retrofitting. Order the insert via Metav Werkzeuge or consult the Metav team for application advice. M240.223 Inside measuring insert — pin measuring faces 10 x 2 mm, L=80 The M240.223 is an inside measuring insert designed to extend the inside‑measurement capability of Digital‑Uni calipers 240.201–240.205, ideal for groove and bore checks from 44 mm. Pin measuring faces 10 x 2 mm For inside measurements from 44 mm Stainless steel construction Compatible with Digital‑Uni calipers Precision slot and bore measurement with defined contact geometry The insert provides repeatable precision by using narrow pin measuring faces (10 x 2 mm) that access slots and grooves which standard jaws cannot reach. Fitted to the Digital‑Uni series, the accessory converts a general‑purpose caliper into a specialised inside gauge without altering the instrument’s core accuracy. The narrow contact pads reduce contact area, making it easier to locate and measure small recesses while preserving a stable reference point. Robust material and design for workshop use Made from stainless steel, the attachment resists corrosion and maintains its measuring edges during regular use. The compact mass (approx. 0.1 kg) and the defined insert length (L=80 mm as specified in the article description) ensure stable handling and minimal added flex when mounted. Because the insert is designed for inside measurements starting at 44 mm, it is particularly useful for slot, bore and groove inspection tasks in mechanical engineering and assembly lines where access is limited. Practical compatibility and workflow benefits Integration with the Digital‑Uni calipers series 240.201–240.205 keeps the measurement workflow efficient: no separate gauge set is required and familiar caliper handling is retained. The accessory supports faster inspection cycles and reduces the need for improvised fixtures, helping to cut measurement time while maintaining traceable results. When paired with a digital caliper, readings remain clear and can be recorded according to existing shop procedures. Trust and service from a precision partner Metav IndustryLine supplies this insert with the backing of a broad metrology programme: dependable supply, transparent ordering and expert advice from the Metav team. The product fits Metav’s mission to make precise measurement tools accessible and reliable for workshops and industry alike, supported by a European quality filter and customer service for technical queries. For compatibility checks, application advice or to request the M240.223 inside measuring insert, contact Metav Werkzeuge GmbH — Metav consultants provide practical assistance from Emmerich to keep inspection processes running smoothly. Technical data Article number: M240.223 GTIN: 4061905053757 Label: Inside measuring insert ab 44 mm, pin measuring faces 10 x 2 mm, L=80 for Digital‑Uni calipers series 240.201–240.205 Facts Measuring length L: 80 mm Weight: 0.1 kg Pin measuring faces: 10 x 2 mm Measuring range (inside): from 44 mm Special features Material: stainless steel Compatibility: Digital‑Uni calipers series 240.201–240.205 Intended for groove and bore inside measurements Compact accessory for enhanced caliper functionality FAQ How is the M240.223 attached to a caliper? The M240.223 attaches directly to Digital‑Uni calipers 240.201–240.205 by replacing or mounting on the existing inside jaws according to the series’ accessory interface, creating a secure measuring extension for slots and bores. Which measurements are best suited for this insert? The insert is intended for inside measurements from 44 mm and is optimised for narrow grooves, slots and bores where the 10 x 2 mm pin measuring faces provide a defined contact point and repeatable results. Is the material resistant to workshop conditions? Yes, the M240.223 is made of stainless steel, offering corrosion resistance and durability for routine workshop and production environments. Can the insert affect caliper accuracy? When correctly mounted on the compatible Digital‑Uni caliper series, the insert preserves the instrument’s measuring concept; the defined pin geometry supports repeatable contact without introducing undue flex or uncertainty. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
450mm Electronic Scale With Ø41mm Magnifier, Carbon Body, mm/inch Display, Proximity Output, Battery CR2023, Supplied In Case - Metav IndustryLine
Combine lightweight carbon construction, high 0.01 mm resolution and convenient proximity data output for efficient, reproducible workshop measuring. Order the scale directly via Metav Werkzeuge or consult our specialists for application advice. M838.715 measuring scale — Electronic rule with magnifier, carbon body (0–450 mm), Metav IndustryLine The M838.715 measuring scale is an electronic workshop ruler with an integrated magnifier and proximity data output, designed for precise component measurement and straightforward digital transfer in production and inspection tasks. Electronic scale with integrated Ø41 mm magnifier Carbon construction for reduced weight and high stiffness Dual mm/inch display with Reset/Preset function Proximity data output for efficient data capture Precision where mid-range measurements matter The instrument belongs to the mid measurement class (300–500 mm), making it ideal for medium-sized components in fixture and mould construction. With a nominal measuring range of 0–450 mm, the design balances reach and rigidity: longer than compact rulers yet still manageable as a single-handed tool. The combination of 0.01 mm resolution and a stated accuracy of 0.03 mm allows reliable repeatability for workshop quality control, reducing rework and inspection time. This measurable performance supports faster decision-making on the shop floor and tighter process control. Clear readout and digital-ready workflow A clear digital display with mm/inch selection and Reset/Preset ease repetitive tasks and cross-team communication. The Proximity data output enables non-contact transfer to compatible data loggers or inspection software, streamlining documentation and traceability. Battery operation via 1× CR2023 keeps the instrument mobile; the compact power supply supports intermittent use without bulky cabling. These features make the device a practical bridge between manual measurement practice and digital record-keeping, improving throughput in small-batch and series production. Designed for practical workshop handling Constructed from carbon, the instrument combines low weight with sufficient stiffness for reproducible reading over its length; the overall length of 720 mm and a listed weight of 1 kg keep handling comfortable while preserving stability. The integrated Ø41 mm magnifier enhances readability of fine graduations and decimal values, reducing operator strain and speeding up routine checks. The robust interpretation of scales and tactile ergonomics minimise measurement variability, supporting consistent quality without complex training. Suitability and application benefits This measuring instrument is particularly suited to general machine and metalworking environments where medium-range precision is required: component mounting, sample checks, and inspection of intermediate assemblies. The mix of digital clarity, lightweight carbon construction and proximity output reduces cycle times and aids data capture for SPC or basic automation. For operations seeking to improve documentation and cut manual transcription errors, integration of this rule into existing workflows yields immediate efficiency gains and more reliable quality records. Contact Metav Werkzeuge for a tailored specification check and procurement advice for the carbon measuring scale with proximity output and magnifier Technical data Article number: M838.715 GTIN: 4061905450044 Manufacturer: Metav IndustryLine Material: Carbon Measuring range: 0–450 mm Total length: 720 mm Weight: 1 kg Resolution: 0.01 mm Accuracy: 0.03 mm Display: mm/inch with Reset/Preset Data output: Proximity Power supply: 1× CR2023 Magnifier diameter: Ø41 mm Digital: Yes SKU: M838.715 Core data Measuring range max: 450 mm Measuring range min: 0 mm Total length: 720 mm Weight: 1 kg Resolution: 0.01 mm Accuracy: 0.03 mm Magnifier: Ø41 mm Battery: CR2023 Special features Integrated magnifier for improved readability Dual mm/inch readout with Preset/Reset function Proximity output for non-contact data transfer Carbon construction for low weight and stiffness Suitable for mid-range workshop measurement tasks Digital instrument for straightforward documentation FAQ What is the effective measuring range of this instrument? The rule offers an effective measuring range of 0–450 mm, placing it in the mid-range class suitable for fixtures, housings and medium-sized components. Does the display support imperial units? Yes, the digital readout switches between mm/inch and includes Reset/Preset functions for repeatable workflows. How precise is the measuring result? The instrument provides a 0.01 mm resolution with a stated accuracy of 0.03 mm, suitable for standard workshop quality control. Can measurement data be transferred to a computer or logger? Data is output via a Proximity interface, allowing non-contact transfer to compatible data acquisition systems. What power source does the device use? The instrument is powered by a single CR2023 cell, keeping the unit compact and portable. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
5 000mm Digital Einbaumessschieber, 0,01mm, IP 67, Big Screen Swiss Electronics - Microtech Metrology
Der Einbaumessschieber vereint Reichweite, robuste Schutzart und feine Ablesbarkeit zu einer praxisgerechten Lösung für großformatige Messaufgaben; die Kombination aus Extra‑Langem Messbereich bis 5.000 mm, IP67‑Schutz und Auflösung 0,01 mm sorgt für zuverlässige Messergebnisse selbst unter rauen Betriebsbedingungen. Bestellen Sie das Gerät direkt über Metav Werkzeuge oder fragen Sie unsere Technische Beratung an, wenn Sie individuelle Einbaufragen klären möchten. Einbaumessschieber von Microtech Metrology Der Einbaumessschieber für großformatige Messaufgaben mit robuster Schutzart, großformatiger Anzeige und industrieller Einbaufähigkeit. Einbaumessschieber für Messlängen bis 5.000 mm Digitalanzeige: Big Screen Swiss Electronics Auflösung 0,01 mm für reproduzierbare Messwerte IP 67 Schutz gegen Staub und Strahlwasser Robuste Bauform für industrielle Montage Robuste Bauweise für langfristige Einsätze und Transport Die Konstruktion des Messschiebers ist auf Langlebigkeit und Wiederholgenauigkeit ausgelegt. Durch den Extra‑Langen Messbereich bis 5.000 mm bleibt die Messführung ausreichend steif, sodass auch großformatige Bauteile reproduzierbar vermessen werden können. Die Schutzart IP67 gewährleistet zusätzlichen Schutz gegen Staub und zeitweiliges Untertauchen, was die Einsatzmöglichkeiten in Werkstatt und Fertigung erweitert. Präzision und Messausgabe für industrielle Anwendungen Trotz großer Reichweite bietet das Gerät eine feine Ablesung von 0,01 mm; die angegebene Genauigkeit von 0,12 mm beschreibt die erwartbare Messabweichung unter Normbedingungen. Die Big Screen Swiss Electronics Anzeige sorgt für klare Lesbarkeit und erleichtert die Fehlervermeidung bei wiederholten Messvorgängen. Diese Kombination aus Auflösung und Anzeige unterstützt effiziente Prüfprozesse in der Fertigungskontrolle. Integration, Einbau und Bedienkomfort Die Einbaumontage wurde für feste Einbausituationen konzipiert, so dass sich der Messschieber in bestehende Vorrichtungen und Messstationen nahtlos einfügen lässt. Die digitale Anzeige ist für den Einbau optimiert, wodurch Bedienpersonal schnelle Sichtkontrollen durchführen kann. Zusätzlich erlaubt die robuste Bauart eine sichere Befestigung, die langzeitstabile Messergebnisse fördert. Geeignete Einsatzfelder und Zielgruppen Dieses Messgerät richtet sich an Anwender im Vorrichtungs‑ und Formenbau, in der Rohr‑ und Behälterfertigung sowie an Werkstätten, die großformatige Komponenten vermessen müssen. Durch die Kombination aus Reichweite, Schutzart und digitaler Lesbarkeit eignet sich der Schieber besonders für Produktionsumgebungen, in denen Wiederholgenauigkeit und Belastbarkeit entscheidend sind. Empfehlung: Für präzise und reproduzierbare Langmessungen empfiehlt Microtech Metrology den Einbaumessschieber mit großer Anzeige — bestellen Sie das Gerät bequem über Metav Werkzeuge oder fordern Sie technische Details per E‑Mail an info@metav-werkzeuge.com an. Produktmerkmale Artikelnummer: 142550147 GTIN: 4061905459795 Marke: Microtech Metrology Bezeichnung: Einbaumessschieber Digitalanzeige: Big Screen Swiss Electronics Fakten Messbereich: 0–5.000 mm Ablesung: 0,01 mm Genauigkeit: 0,12 mm UID: 142550147 Besonderheiten IP 67 Schutz — Staubdicht und Schutz gegen zeitweiliges Untertauchen Kategorie: Messschieber Digital Bauform: Einbaumessschieber Messbereich Klassifizierung: Extra‑Lang — ausgelegt für großformatige Komponenten FAQ Welche Messlänge deckt der Einbaumessschieber ab? Der Einbaumessschieber von Microtech Metrology deckt einen Messbereich von 0–5.000 mm ab und ist damit für großformatige Bauteile und Vorrichtungen ausgelegt. Welche Anzeige und Ablesegenauigkeit bietet das Gerät? Die digitale Anzeige Big Screen Swiss Electronics liefert eine Ablesung von 0,01 mm; die in den technischen Daten angegebene Genauigkeit liegt bei 0,12 mm. Ist das Messgerät für raue Umgebungen geeignet? Ja, der Einbaumessschieber verfügt über die Schutzart IP67, wodurch er gegen Staub geschützt ist und kurzfristiges Untertauchen übersteht — geeignet für anspruchsvolle Fertigungsumgebungen. Für welche Anwendungen ist der Schieber besonders geeignet? Der Einbaumessschieber eignet sich besonders für Vorrichtungs‑ und Formenbau, Rohr‑ und Behälterfertigung sowie für Werkstätten, die wiederholbare Langmessungen benötigen. Welche Artikelnummer hat das Produkt für die Bestellung? Für die Bestellung oder Anfrage verwenden Sie bitte die Artikelnummer 142550147; Marke: Microtech Metrology. Hersteller: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine; tool@microtech.tools
5 mm Bore Distance Measuring Insert With Conical Measuring Faces For Digital Uni Caliper Series 240.201–240.205 - Metav IndustryLine
Take advantage of the combination of Ø 5 mm cone measuring faces and stainless-steel durability for fast, repeatable bore‑centre checks; order the accessory directly via Metav Werkzeuge or consult our specialists if required. M240.251 Hole‑distance measuring insert Ø 5 mm — cone measuring faces for Digital Uni calipers (series 240.201–240.205) | Metav IndustryLine M240.251 is a hole‑distance measuring insert with Ø 5 mm cone measuring faces, engineered for precise centre‑to‑centre measurement of bores when used with the Digital Uni caliper series 240.201–240.205. Ø5 mm cone tips for precise bore centres Stainless steel construction for corrosion resistance Compatible with Digital Uni calipers 240.201–240.205 Precise bore‑centre measurement for reliable inspection results The cone geometry with Ø 5 mm tips converts radial contact into a reproducible datum for centre‑to‑centre checks, reducing alignment errors that commonly occur with flat probes. Fitted to a digital caliper, the insert enables rapid verification of hole patterns and pitch, supporting consistent pass/fail decisions on the shop floor. The measured signal is as dependable as the mechanical contact; the shaped faces centre reliably in round bores and minimise lateral play, which improves traceability of measurements across batches. Robust stainless‑steel design that endures workshop conditions Constructed from stainless steel, the accessory resists corrosion and maintains form under regular handling, ensuring sustained accuracy over time. The compact 35 mm length and low mass (approx. 0.04 kg) make the insert easy to mount and manoeuvre without adding appreciable inertia to the caliper, preserving the instrument’s handling characteristics. Long service life and low maintenance reduce downtime and support continuous inspection routines in production or maintenance environments. Seamless integration to speed up measurement workflows Prepared for direct attachment to the Digital Uni calipers (series 240.201–240.205), the insert streamlines setup and reduces cycle times in repetitive checks. By converting a standard caliper into a specialised bore‑distance gauge, the accessory leverages existing tools and removes the need for dedicated jigs, which is a cost‑efficient approach for small to medium production runs. The result is improved throughput and a lower risk of rework thanks to quicker, more repeatable measurements. For precision bore‑centre inspections, choose the M240.251 from Metav Werkzeuge — contact our Emmerich team for tailored advice or compatibility checks via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: M240.251 GTIN: 4061905053832 Brand: Metav IndustryLine Data Diameter: 5 mm Length: 35 mm Weight: 0.04 kg ECLASS: 21170324 Special features Cone measuring faces for bore‑centre measurement Compatible with Digital Uni calipers series 240.201–240.205 Material: stainless steel FAQ How does the insert measure hole distances accurately? The M240.251 uses Ø 5 mm cone measuring faces to centre inside a bore; when mounted on a Digital Uni caliper, it converts radial contact into a stable datum that yields repeatable centre‑to‑centre readings. Which calipers are compatible with this accessory? Compatibility is designed for the Digital Uni caliper series 240.201–240.205; the M240.251 mounts directly to those models to create a calibrated solution for bore‑pitch checks. Is the material suitable for regular workshop use? Yes, the insert is made from stainless steel, offering corrosion resistance and dimensional stability appropriate for frequent handling in production and inspection areas. Can the accessory reduce measuring time in serial inspections? By transforming a general‑purpose caliper into a specialised bore‑distance gauge, the M240.251 shortens setup and measurement cycles, improving throughput for repetitive quality checks. Does the insert affect caliper handling or weight significantly? With a length of 35 mm and a mass of approximately 0.04 kg, the accessory preserves the caliper’s handling characteristics while adding the necessary geometry for reliable bore measurements. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
5 mm Internal Measuring Insert Flat Measuring Faces 1 x 0.4 mm L12 For Digital Uni Caliper, Stainless Steel - Metav IndustryLine
Take advantage of the combination of a flat 1 x 0.4 mm measuring face, corrosion‑resistant stainless steel construction and a compact L = 12 mm tip for reliable groove and slot measurement. Order the accessory directly via Metav Werkzeuge or consult our specialists for application advice and compatibility checks. M240.211 interior measuring insert — flat 1 x 0.4 mm tip for Digital‑Uni calipers The M240.211 interior measuring insert is a precision flat‑faced inside measuring tip intended for accurate slot and groove measurement on Digital‑Uni calipers series 240.201–240.205, suitable for inside measurements starting at 5 mm. Flat 1 x 0.4 mm measuring face Fits Digital‑Uni calipers series 240.201–240.205 Designed for inner measurements from 5 mm Stainless steel construction Precision contact for narrow grooves and slots The insert provides a flat measuring face of 1 x 0.4 mm, enabling stable contact in narrow grooves where a pointed tip would slip or deform the part. The small, flat contact area reduces local deformation and contact uncertainty, which improves repeatability when checking multiple identical features. Manufactured from stainless steel, the tip maintains its geometry under frequent use and resists corrosion, ensuring consistent dimensional control for workshop and inspection tasks. Robust design that keeps measurement workflow efficient A compact tip length of L = 12 mm gives access into confined recesses while keeping the lever arm short to limit bending and play; this improves handling and supports quick, one‑person measurement routines. The modest mass of the insert reduces inertia on the caliper slide, helping to preserve the instrument's original feel and accuracy. Because the accessory is engineered for routine industrial use, the result is fewer re‑measurements and a faster quality control loop. Seamless integration with Digital‑Uni calipers for dependable results The insert is made specifically for the Digital‑Uni calipers series 240.201–240.205, so mechanical fit and alignment are assured and calibration offsets remain minimal after fitting. That compatibility streamlines tool management: the measuring tip becomes a simple, replaceable extension of the caliper's functionality, ideal for workshops that require both general‑purpose and specialised inside measurements without investing in separate gauges. For groove and slot measurement tasks that demand repeatable contact and corrosion resistance, request the Metav IndustryLine M240.211 interior measuring insert from Metav Werkzeuge — contact our Emmerich team by e‑mail at info@metav-werkzeuge.com or by phone on +49 2822 7131930 for technical clarification and delivery options. Technical Data Article number: M240.211 GTIN: 4061905053689 Brand: Metav IndustryLine Facts Weight: 0.04 kg Measuring face: 1 x 0.4 mm Tip length L: 12 mm Inner measurement from: 5 mm Special features Material: stainless steel Flat measuring face for groove measurement Compatible with Digital‑Uni calipers series 240.201–240.205 Intended for inside measurements and slot inspection FAQ What is the primary purpose of this measuring insert? The M240.211 insertion tip is designed for precise groove and slot measurement, providing a flat contact surface that improves stability and repeatability when measuring internal features. Which calipers are compatible with the insert? Compatibility is specified for the Digital‑Uni calipers series 240.201–240.205; the M240.211 is manufactured to fit those models and align with their measuring axis. What material is the insert made from and why does that matter? The insert is made of stainless steel, which preserves tip geometry under repeated use and provides corrosion resistance, helping to maintain consistent measurement results over time. Is a calibration certificate supplied with the insert? The M240.211 is an accessory part; a calibration certificate is not automatically included unless explicitly stated on the product labelling or order documentation. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
50 mm Gauge Insert Ø5 mm With M2.5 Thread For Dial Indicator Mounting - Metav IndustryLine
Take advantage of a compact, stable measuring solution that combines 50 mm reach with a slim Ø 5 mm tip and an M2.5 thread for secure dial gauge mounting; the result is fast installation and reliable repeatability. Order the measuring insert directly via Metav Werkzeuge or consult the specialists for compatibility and delivery. Measuring insert M240.207.A1 — dial gauge adaptor, 50 mm, Ø 5 mm A Measuring insert M240.207.A1 designed as a dial gauge adaptor for integration with caliper mounts 240.207.N–240.209.N, suited to precision inspection and workshop metrology 50 mm reach for controlled probe access Ø 5 mm tip for fine-dimension contact M2.5 thread for secure dial gauge attachment Stable reach for accurate contact measurement A compact probe with a measured 50 mm length gives a reliable extension for repetitive inspection tasks. The modest mass and form factor reduce unwanted deflection, so dimensional checks remain repeatable even when accessing narrow recesses. The slim Ø 5 mm tip provides a small contact area that supports localised probing without masking surrounding geometry, which is particularly useful in assembly and quality control where access is restricted. Secure fastening and straightforward compatibility The integrated M2.5 thread provides a standardised mechanical interface for dial gauge inserts and similar indicators, ensuring a secure connection to the host caliper assembly. Compatibility with caliper models 240.207.N–240.209.N simplifies parts logistics and reduces set-up time on the shop floor. This design emphasis on a standard thread and compact geometry supports efficient changeovers and lowers the risk of measurement error caused by loose or imprecise fittings. Designed for precision workflows and inspection stations Lightweight and purpose-built, the insert supports routine measurement cycles in production and inspection environments where dependability matters. The component’s dimensions and mechanical interface facilitate quick replacement and predictable behaviour in repetitive tasks, improving throughput in measurement routines. When used as part of a calibrated measuring chain, the insert contributes to a clear traceability path and dependable quality documentation. For precise dial gauge mounting and parts compatibility, request the Metav IndustryLine measuring insert M240.207.A1 via Metav Werkzeuge GmbH — contact info@metav-werkzeuge.com or call +49 2822 7131930 for ordering and technical advice Technical data Article number: M240.207.A1 GTIN: 4054469151489 Manufacturer: Metav IndustryLine Weight: 0.3 kg Length: 50 mm Tariff number: 90178090 Core specifications Tip diameter: 5 mm Thread: M2.5 Length: 50 mm Weight: 0.3 kg eClass: 21170613 ETIM: EC002219 Special features Compatible with caliper mounts 240.207.N–240.209.N Intended as a dial gauge insert/adaptor Suited to precision inspection and workshop metrology Compact design for restricted-access measurements FAQ Is this insert compatible with standard dial gauges? The insert is supplied for use as a dial gauge adaptor and features an M2.5 thread to accept many standard gauge fittings; compatibility should be confirmed against the dial gauge spindle dimensions specified for M240.207.A1. Which caliper mounts does this part fit? This measuring insert is designed for use with caliper mounts 240.207.N to 240.209.N and provides a secure mechanical interface for dial gauge installation. What are the physical dimensions of the insert? The insert has a length of 50 mm and a tip diameter of 5 mm; weight is 0.3 kg, as specified for M240.207.A1. Can the insert be used for deep bore measurements? The 50 mm reach is intended for controlled access to confined features; for substantially deeper bores, combined extension strategies should be evaluated to maintain stiffness and measurement integrity. Does the insert include any calibration certificate? No calibration certificate is specified for this measuring insert in the product data; calibration status should be verified with the supplier prior to integration if traceable measurement results are required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
50-300mm Digital Internal Caliper With Preset, Stainless Hardened Steel, RB5 Output, Supplied In Case - Metav IndustryLine
Take advantage of a hardened stainless-steel build and a 50–300 mm measuring range for reliable internal measurements across the workshop. The built-in digital preset and RB 5 data output combine precise readout and traceable data transfer for seamless quality control. Order directly via Metav Werkzeuge or consult the specialists for integration advice. Digital internal caliper M240.033.N — 50–300 mm, INOX hardened The Digital internal caliper M240.033.N is a hardened stainless-steel measuring instrument with digital preset and RB 5 interface, designed for precise internal and groove measurements in standard workshop and production use. Stainless, hardened construction for robust service Measuring range 50–300 mm for standard workshop use Digital preset with 0.01 mm resolution display RB 5 data output for integration and traceability Precision tailored to everyday workshop control This instrument delivers repeatable internal measurements thanks to a clear 0.01 mm display and a factory preset function that speeds up routine checks. Classified in the standard 50–300 mm range, it balances reach and rigidity to cover most machining and inspection tasks without unwieldy handling. The digital preset reduces operator steps: set a reference, perform the measure, and record the result. For quality procedures that demand digital traceability, the RB 5 output enables direct data capture into measuring software or data loggers, improving process documentation and reducing transcription errors. Built to withstand daily use while remaining easy to handle The slide and jaws are made from hardened stainless steel and the instrument features a robust metal housing for the display electronics, making it suitable for the shop floor environment. A jaw length of 86 mm and a total weight of about 0.94 kg provide a reassuring feel without compromising manoeuvrability during internal or groove measurements. The delivery in a protective transport case safeguards the caliper in transit and on busy benches. These construction choices extend tool life and keep calibration intervals predictable, supporting a stable inspection routine. Ready for digital workflows and fast measurement cycles Equipped with a 3 V power system and a compact control layout with on/off, set and incremental buttons, the caliper supports fast measurement cycles and simple operator training. The RB 5 interface is intended for direct connection to data collection systems, enabling immediate transfer of values for SPC or documentation purposes. Where traceability is required, the device integrates into traceable metrology chains without additional adapters, making the tool a practical component of modern production and inspection lines. The combination of a hardened feel, clear digital readout and data output helps reduce measurement uncertainty and speeds up decision-making on the shop floor. Contact Metav Werkzeuge for tailored technical advice and to arrange integration of the Metav IndustryLine digital internal caliper with RB 5 output into existing measurement systems. Technical data Article number: M240.033.N GTIN: 4054469159911 Manufacturer: Metav IndustryLine Facts Measuring range: 50–300 mm Display resolution: 0.01 mm Power supply: 3 V Weight: 0.94 kg Jaw length: 86 mm Tariff number: 90173000 Special features Hardened stainless-steel construction Metal housing for display electronics Digital preset function RB 5 data output for direct integration Delivered in transport case for secure handling Factory standard (Werksnorm) compliance FAQ What types of measurements is this caliper suited for? The caliper is optimised for internal measurements and groove checks; the Digital internal caliper M240.033.N covers internal, step and similar inside-dimension tasks within the 50–300 mm range. How accurate is the readout and what is the resolution? The instrument provides a display resolution of 0.01 mm and a stable digital readout suitable for standard workshop quality control procedures. Can the caliper export measurement data to a PC or logger? Yes, the caliper includes an RB 5 data output that permits direct transfer of measured values to compatible data capture systems for SPC and documentation. Is the instrument protected for workshop use? The hardened stainless-steel construction and metal display housing give robust protection, and the caliper is supplied in a transport case to reduce risk during handling. Does the device include a preset function and how does it help? The built-in digital preset allows a reference value to be set quickly, which speeds repetitive measurement tasks and reduces operator steps when checking multiple components. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
50-300mm Digital Internal Caliper With Probe, Preset Function, Stainless Hardened Body, Supplied In Case - Metav IndustryLine
Take advantage of a hardened stainless‑steel construction and a 50–300 mm measuring range with a clear digital readout and data output; the design ensures repeatable internal and groove measurements for routine quality control. Order the Digital Internal Caliper M240.042.N directly via Metav Werkzeuge or consult the team for application advice. Digital Internal Caliper M240.042.N — stainless, hardened, 50–300 mm range Digital Internal Caliper M240.042.N provides reliable internal and groove measurements for everyday workshop and machine‑shop tasks with a compact probe and preset function. Digital readout with preset and ON/OFF control Hardened stainless steel construction Data output via RB 5 interface Precision that matches workshop demands The Digital Internal Caliper is engineered for the standard workshop class, covering a 50–300 mm measuring range that balances reach and stiffness for consistent one‑hand operation. With a resolution of 0.01 mm on the display, the instrument supports routine quality checks and production sampling where clear numeric feedback speeds decision‑making. The hardened stainless steel profile and metal housing reduce wear and maintain alignment over repeated use, which improves traceability and lowers rework rates in a production environment. Purpose-built for internal and groove measurements A dedicated pin probe enables confident measurement of internal grooves and narrow bores where conventional jaw faces cannot reach. The unit’s preset function and ZERO setting simplify repetitive tasks by allowing quick datum resets, reducing operator time per measurement and improving process throughput. The clear ON/OFF and ZERO/PRESET controls are arranged for efficient operation on the shop floor, so cycle times are shortened while measurement consistency is increased. Durable integration and data capture for quality workflows Durability meets connectivity: the caliper’s metal housing and hardened construction resist workshop impacts, while the RB 5 data output enables capture of measured values for statistical process control or electronic documentation. Powered by a 3 V cell, the instrument is ready for extended inspection shifts without complex power management. At approximately 0.9 kg, the tool is robust yet manageable for routine handling and inspection tasks, smoothing the flow between measuring station and production line. Contact Metav Werkzeuge in Emmerich for tailored advice on integrating the M240.042.N into inspection routines — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: M240.042.N GTIN: 4054469159966 Category: Messschieber Weight: 0.9 kg Facts Measuring range: 50–300 mm Resolution: 0.01 mm Power: 3 V Customs tariff: 90173000 Special features Hardened stainless steel, metal housing Pin probe for internal/groove measurement ON/OFF and ZERO/PRESET buttons Data output: RB 5 Works standard (Werksnorm) FAQ How does this caliper handle groove measurements? The M240.042.N includes a pin probe designed for internal and groove measurements; the instrument’s geometry and hardened stainless‑steel build provide stable contact and repeatable results. Can measured values be exported to a PC or data logger? Yes, the caliper offers a data output via the RB 5 interface for direct value transfer into documentation or SPC systems. What display resolution and typical accuracy can be expected? The instrument provides a display resolution of 0.01 mm, suitable for standard workshop inspections within the designated measuring range. Is the caliper suitable for continuous shop‑floor use? The metal housing, hardened stainless‑steel construction and simple ON/OFF control make the caliper robust enough for regular shop‑floor inspection cycles. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
50-500mm Digital Internal Caliper Preset Button Stainless Steel Metal Housing, With ON/OFF mm/inch - Metav IndustryLine
Take advantage of a wide 50–500 mm measuring range together with a clear 0.01 mm resolution and robust stainless-steel construction to keep internal dimension checks fast and reproducible; order the device directly via Metav Werkzeuge or consult the specialists for integration advice. Digital Inside Caliper M240.035 — 50–500 mm, stainless steel, preset function (Metav IndustryLine) The Digital Inside Caliper M240.035 is a precision instrument for internal measurements in workshop and production settings, designed for medium-range components and repeatable shop-floor inspection. 50–500 mm measuring range 0.01 mm resolution digital display Hardened stainless steel construction Preset / ZERO function and mm/inch selection Consistent precision that speeds up inspection This caliper combines a wide 50–500 mm measuring range with a clear 0.01 mm resolution, enabling quick decisions during routine quality checks. The medium-range design bridges bench and jigs, offering a balance between reach and stiffness that reduces measurement variability on assemblies and fixtures. Built for internal measurement tasks, the instrument shortens inspection cycles while maintaining repeatable results, which supports higher throughput and fewer rejected parts when implemented in standard shop workflows. Reliable digital read-out and data transfer for traceability A large digital display with ON/OFF, mm/inch, ABS/INC and ZERO/PRESET control ensures fast visual readings and the ability to set reference values instantly. The preset function enables predetermined offsets for gauging operations, reducing manual calculation errors. For process documentation, the caliper provides an RB 2 data output suitable for logging measurement sequences or connecting to data-collection devices, helping to integrate shop-floor checks into traceability chains without complex retrofitting. Durable build tailored to everyday workshop use Manufactured from hardened stainless steel with a protective metal housing, the instrument withstands the mechanical demands of production environments and resists corrosion from coolant exposure. The 105 mm jaw length supports deeper internal checks while remaining rigid enough for consistent readings. Classified as a medium-range caliper (measuring range up to 500 mm), it is well suited for mechanical engineering, maintenance and tooling departments that require robust, repeatable internal measurement capability without specialised laboratory equipment. Contact Metav Werkzeuge today for application guidance or to order the M240.035 directly from Metav Werkzeuge GmbH in Emmerich; expert advice and integration support are available by phone or e‑mail Technical data Article number: M240.035 GTIN: 4054469112619 Category: calipers Brand: Metav IndustryLine Facts Measuring range: 50–500 mm Resolution: 0.01 mm (0.0005 in) Jaw length: 105 mm Power: 3 V Data output: RB 2 Special features Material: hardened stainless steel, metal housing Display functions: ON/OFF, mm/inch, ABS/INC, ZERO/PRESET Digital instrument for internal measurements Suitable for medium-range inspection tasks FAQ What accuracy can be expected with this caliper? The caliper provides a resolution of 0.01 mm; combined with stable handling and the hardened construction, this yields repeatable shop-floor accuracy suitable for standard quality control tasks. Is the preset function useful for gauging setups? Yes—the preset/ZERO option allows the M240.035 to be set to a reference value quickly, simplifying comparative measurements and reducing setup time during repetitive gauging. Can measurement data be exported to a PC or data logger? The instrument includes an RB 2 data output which supports external data collection and process documentation when paired with compatible logging equipment. For which applications is the caliper best suited? Designed as a medium-range caliper, it is ideal for internal measurements on components such as housings, bores and fixtures commonly encountered in mechanical engineering and tooling. What maintenance is required to keep measurements stable? Routine cleaning of measuring faces and careful storage minimise wear; the hardened stainless steel surfaces and metal housing help preserve accuracy under normal workshop use. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
500 mm Digital Caliper With 150 mm Jaws, Ø5 mm Holder, Preset Function, Delivered In Case - Metav IndustryLine
Take advantage of the combination of a 500 mm measuring range, 0.01 mm resolution and a robust 150 mm jaw to measure medium‑sized components reliably; order the Digital‑Uni‑MS directly via Metav Werkzeuge or ask our consultants if needed. Digital‑Uni‑MS 500 mm × 150 mm digital caliper – 5 mm mounting bore (Metav IndustryLine) The Digital‑Uni‑MS is a versatile digital caliper designed for medium‑range workshop and production measurements, combining an extended 500 mm measuring range with a compact jaw design and an integrated mounting bore for gauge inserts 500 mm measuring range for mid-size components 0.01 mm resolution digital readout 150 mm jaws with Ø 5 mm mounting bore RB 2 data output and preset functions Accurate mid‑range measurement for production use The instrument delivers a 500 mm measuring range with a standard 0.01 mm display step, making it suitable for many tasks in machine building and toolmaking where reach and stability must be balanced. Classified for medium‑range work, this caliper offers the reach to handle brackets, housings and fixtures while keeping handling and repeatability within practical workshop limits. The combination of extended range and fine resolution supports reliable decisions in incoming inspection and quality control. Fast, traceable digital readings to speed workflows A clear digital interface provides mm/inch switching and ABS/INC operation, while dedicated NULL/PRESET functions allow quick reference setting for comparative measurements. The unit includes RB 2 data output to transfer readings to recording systems or data loggers, reducing transcription errors and accelerating statistical process control. With a concise control layout and smooth slider action, the device reduces cycle time for routine checks and supports traceable measurement protocols. Practical mechanics and functional mounting options The caliper is fitted with 150 mm jaws and a Ø 5 mm mounting bore intended for gauge inserts, enabling flexible fixture or adapter use where repeatable positioning is needed. The construction is conceived for workshop durability while retaining the sensitivity required for precision work; the instrument weighs approximately 3.4 kg, giving it a reassuring feel and stability during longer measurements. Supplied to works standard, the tool is prepared for integration into daily inspection routines without unnecessary complexity. Where this caliper fits into the workflow This digital caliper suits quality inspectors, maintenance workshops and small series production where medium‑sized components are common. Its blend of reach, fine display resolution and data connectivity supports modern inspection routines and reduces manual data handling. Backed by the Metav IndustryLine portfolio, the device benefits from a dependable supply chain and practical documentation for implementation into existing measurement procedures. Contact Metav Werkzeuge for tailored advice on integrating the Metav IndustryLine Digital‑Uni‑MS into measurement processes or to request ordering and logistics information Technical data SKU: M240.210.O GTIN: 4054469151984 Measuring range: 0–500 mm Resolution (display): 0.01 mm Weight: 3.4 kg Jaw length: 150 mm Data output: RB 2 Facts Measuring range max: 500 mm Measuring range min: 0 mm Reading step: 0.01 mm Tariff number: 90173000 Special features Digital display with ON/OFF, mm/inch, ABS/INC and NULL/PRESET buttons Mounting bore Ø 5 mm for gauge inserts Delivered to works standard (without preset inserts) FAQ What measuring range and resolution does the caliper offer? The Digital‑Uni‑MS provides a measuring range of 0–500 mm with a display resolution of 0.01 mm. Can the instrument switch between metric and imperial units? Yes, the caliper supports mm/inch switching via its digital display and includes ABS/INC functionality for flexible measurement modes. What is the RB 2 output used for? RB 2 is the data output interface on the Digital‑Uni‑MS for transferring measured values to data loggers or inspection software, enabling digital record keeping. What does "without inserts preset" mean for delivery? The label indicates the caliper is supplied to works standard and does not include preinstalled measuring inserts; adapter or insert fitting is available separately if required. Is the caliper suitable for workshop and production environments? Yes, the combination of a 500 mm range, robust jaw geometry and digital connectivity makes the instrument well suited to routine workshop inspections and small‑batch production control. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
5000 mm Digitaler Messschieber, 0,01mm Auflösung, IP 67, ISO 17025 Kalibrierzeugnis, lange Backe 300mm - Microtech Metrology
Die Kombination aus Extra‑Langem Messbereich, robuster Schutzart IP67 und werksseitiger ISO‑17025‑Kalibrierung sorgt für verlässliche Messergebnisse auch bei großformatigen Bauteilen; bestellen Sie den kalibrierten Microtech Messschieber direkt über Metav Werkzeuge oder fragen Sie unsere Beratung bei Bedarf an. Messschieber – Digitaler Messschieber von Microtech Metrology Der Messschieber dient für präzise Längenmessungen über große Reichweiten und eignet sich besonders für anspruchsvolle Industrie‑ und Werkstattanwendungen. Extra‑Lang: Reichweite bis 5.000 mm Digitale Anzeige: Swiss Electric, Ziffernhöhe 11 mm Schutzart IP67 für staub‑ und wasserdichten Einsatz Werkseitig kalibriert nach ISO 17025, Kalibrierzeugnis inklusive Messlösungen für großformatige Komponenten und robuste Handhabung Für Messaufgaben in der Schwerzerspanung, im Rohr‑ und Behälterbau oder beim Formenbau ist die Extra‑Lang‑Ausführung ideal, da sie ein optimiertes Verhältnis aus Reichweite und Profilsteifigkeit bietet. Der lange Schenkel und die Schnabellänge 300 mm ermöglichen sichere Ansätze an tiefen oder schwer zugänglichen Messstellen und reduzieren das Nachmessen. Durch die stabile Bauform wird die Reproduzierbarkeit über längere Längen verbessert, sodass weniger Nacharbeit und eine höhere Fertigungsleistung erreicht werden. Präzision, Ablesbarkeit und digitale Komfortfunktionen Die Anzeige arbeitet mit einer Ablesung von 0,01 mm, was feine Abstufungen sichtbar macht, während das Swiss Electric Display mit 11 mm Ziffernhöhe die Ablesbarkeit am Arbeitsplatz erhöht. Das verwendete ABS‑Messsystem sorgt für zuverlässige Nullpunktreferenzen und einfache Umstellung zwischen Einheiten. Dadurch lassen sich Messdaten schneller erfassen und in dokumentationsfähige Ergebnisse überführen, was Prüfprozesse im Fertigungsalltag beschleunigt. Schutz, Kalibrierung und Messsicherheit für den Profi‑Einsatz Der Schieber ist mit IP67 ausgelegt und hält damit Staub und zeitweiliges Untertauchen stand, was den Einsatz unter rauen Bedingungen erlaubt. Das Werkzeug wird vollständig kalibriert ausgeliefert; ein Kalibrierzeugnis nach ISO 17025 liegt bei und dokumentiert die Messrichtigkeit. Diese Kombination aus Robustheit und nachgewiesener Kalibrierung reduziert Unsicherheiten bei Abnahmen und erleichtert die Integration in geregelte Qualitätsprozesse. Einsatzprofil, Zielgruppe und Bedienkomfort Das Produkt richtet sich an Messtechniker, Vorrichtungsbauer und Qualitätsverantwortliche, die lange Messstrecken zuverlässig abdecken müssen. Bedienfreundlichkeit zeigt sich in der klaren Anzeige, dem robusten Querschnitt von 53x8 und der Möglichkeit, Messungen auch an feuchten oder verschmutzten Bauteilen durchzuführen. Für den Einsatz an langen Bauteilen empfiehlt sich der Schieber als Werkzeug für wiederholbare Prüfabläufe, bei denen Zeitersparnis durch klare Ablesung und gesicherte Kalibrierung im Vordergrund steht. Empfehlung: Für präzise Langmessungen und dokumentierte Qualitätskontrolle empfiehlt Metav Werkzeuge den kalibrierten Microtech Messschieber mit IP67‑Schutz; Bestellfragen und technische Beratung: info@metav-werkzeuge.com, Tel. +49 2822 7131930 Produktmerkmale Artikelnummer: 141073505 Marke: Microtech Metrology Bezeichnung: Messschieber GTIN: 4061905454523 Messsystem: ABS Fakten Messbereich: 0‑5000 mm Ablesung: 0,01 mm Genauigkeit: 0,16 Schnabellänge: 300 mm Querschnitt: 53x8 Besonderheiten IP Schutz: IP 67 Digitale Anzeige: Swiss Electric Digit Höhe 11 mm Digital: Ja ISO 17025 Kalibrierung: Kalibrierzeugnis wird mitgeliefert FAQ Welche Längen kann der Schieber messen? Der Microtech Messschieber ist für Messungen von 0 bis 5.000 mm ausgelegt und deckt damit Anwendungen im Rohr‑, Behälter‑ und Formenbau ab. Wie fein ist die Auflösung der Anzeige? Die digitale Anzeige des Messschiebers bietet eine Ablesung von 0,01 mm, kombiniert mit einem gut lesbaren Swiss Electric Display. Ist der Messschieber sofort einsatzbereit für zertifizierte Prüfungen? Ja, der Microtech Messschieber wird werksseitig kalibriert und mit einem Kalibrierzeugnis nach ISO 17025 ausgeliefert, sodass er sich für geregelte Prüfabläufe eignet. Hersteller: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
5000mm Digital Caliper Long Jaw 300mm Touchscreen Colour Wireless USB ISO 17025 Calibrated - Microtech Metrology
Take advantage of the combination of an extra‑long 5,000 mm measuring range, robust hand‑finished jaws and traceable ISO 17025 calibration for reproducible measurements on large components. Order the workshop caliper directly via Metav Werkzeuge or request technical advice from our consultants. Workshop caliper — Microtech Metrology digital caliper with 2.4″ colour touchscreen The Workshop caliper is an extra‑long digital caliper designed for large-format metrology up to 5,000 mm, combining a clear 2.4″ colour touchscreen with Wireless+USB data output for integration into quality workflows. Extra‑long measuring range up to 5,000 mm 2.4″ colour touchscreen for clear readings Wireless+USB data output for traceable logging ISO 17025 calibration and certificate included Measure large components with reproducible precision The extra‑long construction addresses measurements on large workpieces such as heavy housings, long shafts and pipes where profile stiffness and repeatability are critical. With a measuring range reaching 5,000 mm and hand‑finished jaws, the instrument keeps deflection and runout low across its length, so measurements remain comparable even on extended setups. Supplied fully calibrated to ISO 17025, the device is delivered with a traceable calibration certificate, supporting internal audits and a documented quality chain. Reliable numerical output for quality control and process data A resolution of 0.01 mm together with an indicated accuracy of 0.13 mm gives a clear balance between practical workshop requirements and measurable precision. The caliper’s measuring force 1–20 N helps standardise contact pressure to reduce operator‑induced variability, while the Wireless+USB output ensures measurement data can be exported directly to logging systems or SPC software for fast process control. The digital 2.4″ colour touchscreen streamlines reading and reduces transcription errors, improving throughput without compromising the traceability needed in production environments. Built to integrate with workshop routines and large assemblies Long jaw geometry (300 mm jaw length) and rugged construction make this instrument suitable for assembly fixtures and layout benches where reach and durability matter. The large format design is complemented by ergonomic controls and a responsive display for straightforward operation during repetitive checks. Integration into existing documentation routines is simplified by the multiple data interfaces, and the included ISO 17025 certificate removes the immediate need for separate initial calibration, shortening time to first measurement. For heavy‑duty metrology tasks where reproducibility and documented accuracy are required, this caliper is configured to fit directly into shopfloor and inspection workflows. Contact Metav Werkzeuge in Emmerich for a technical quotation or specification matching; email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss integration and delivery options. Technical data SKU: 141050256 GTIN: 4061905454493 Manufacturer: Microtech Metrology Digital display: Colour 2.4″ touchscreen Data output: Wireless+USB Digital: yes ISO 17025 calibration: included Core specifications Measurement range: 0–5,000 mm Resolution (reading): 0.01 mm Accuracy (indicated): 0.13 mm Jaw length: 300 mm Measuring force: 1–20 N Display size: 2.4 inches Features and special functions Hand‑finished jaws Extra‑long caliper for large components Wireless and USB data transfer Delivered with ISO 17025 calibration certificate Suitable for workshop and inspection‑room workflows FAQ What is the maximum measuring range of this caliper? The caliper measures up to 5,000 mm and is designed as an extra‑long instrument for large components; the Microtech Metrology workshop caliper (SKU 141050256) covers this full range. Is the instrument supplied calibrated? Yes, the device is delivered fully calibrated to ISO 17025 with an accompanying calibration certificate for immediate use in traceable quality processes. Which data interfaces are available for integration? Measurement data can be exported via Wireless+USB interfaces to logging or SPC systems for direct documentation of readings. What resolution and accuracy can be expected? The instrument provides a reading resolution of 0.01 mm with an indicated accuracy of 0.13 mm, suited to workshop and inspection tasks where long‑range reproducibility is required. Are the measuring jaws suitable for long‑term shop use? The caliper features hand‑finished jaws and robust construction to withstand repetitive measurements on larger assemblies while maintaining repeatability. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
5000mm Precision In-Built Digital Caliper Colour 2.4" Touchscreen, IP54 Wireless USB - Microtech Metrology
Take advantage of the combination of an extra‑long 5,000 mm measuring range, robust IP54 protection and modern data transfer via Wireless and USB for reliable large‑part measurement. Order the instrument directly via Metav Werkzeuge or consult our advisors for system integration and delivery options. Built-in digital caliper – Extra‑long 5,000 mm range, 2.4" colour touchscreen (Microtech Metrology) A built-in digital caliper for industrial measurement of large components and fixtures, designed for permanent installation where long, repeatable linear measurement is required. Extra‑long 5,000 mm measuring range Colour 2.4" touchscreen display Wireless and USB data output IP54 dust and splash protection Consistent large‑part measurement that reduces set‑ups The instrument’s extra‑long 5,000 mm range streamlines measurement of large assemblies and long shafts, reducing the need for repeated re‑fixturing. Installed directly into a machine bed or fixture, the device maintains a constant reference line which improves repeatability across multi‑point checks. Built for heavy fabrication and segmental measurement tasks, the system’s form factor and mounting provisions maintain profile stiffness so that results remain reproducible over long runs. Traceable data flow for modern quality processes Equipped with Wireless and USB data outputs and a 2.4" colour touchscreen, the device supports fast documentation and transfer of measurement records into inspection software or SPC systems. The display resolution is 0.01 mm, while the practical measurement accuracy 0.11 mm reflects the instrument’s suitability for dimensional control of large parts rather than micrometre‑class bench work. This combination enables quicker decision loops on the shop floor and easier archiving of measurement results for audit trails. Built to withstand workshop conditions and simplify operation With an IP54 protection rating and a ruggedised construction, the instrument tolerates workshop dust and occasional splashes while remaining serviceable with minimal maintenance. The touchscreen and clear numeric readout reduce reading errors and speed up routine inspections, while the fixed installation removes the handling variation associated with portable gauges. Operators benefit from a device that is easy to read, robust in daily use and compatible with existing data collection routines. Designed for industrial integration and reliable supply Classed as Extra‑Long measurement equipment, this solution is aimed at heavy‑duty applications such as pipe, vessel and large housing inspection where measurement length is the limiting factor. Delivered by Metav Werkzeuge with their established logistics and quality‑filter approach for the European market, the instrument fits into a modular inspection workflow and supports consolidated supplier management for workshops and toolrooms seeking dependable delivery and product continuity. Contact Metav Werkzeuge for tailored advice on integrating Microtech Metrology built-in digital calipers with a 5,000 mm range into your measurement setup — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data SKU: 142550140 GTIN: 4061905458989 Manufacturer: Microtech Metrology ECLASS: 21170344 Facts Measuring range: 0–5,000 mm Resolution: 0.01 mm Accuracy: 0.11 mm IP rating: IP54 Special features Colour 2.4" touchscreen Wireless and USB data output Digital instrument Category: Digital calipers FAQ What applications suit this extra‑long built‑in caliper best? The built‑in digital caliper from Microtech Metrology (SKU 142550140) is intended for large‑component inspection such as pipes, housings and long shafts where a fixed, repeatable reference and a 5,000 mm measuring range are required. How is measurement data exported from the device? Measurement values can be transmitted via Wireless or via USB for direct capture into inspection software or SPC systems using the caliper’s standard interfaces. What level of precision can be expected for long‑range checks? The instrument offers a display resolution of 0.01 mm with a practical accuracy of 0.11 mm, suitable for dimensional control tasks on large parts where range and repeatability are priorities. Is the caliper protected against workshop conditions? Yes — the device has an IP54 rating, providing protection against dust ingress and water splashes typical in metalworking environments. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
500mm Brake Drum Caliper 150mm Jaws Stainless Steel For Inside And Outside Measurement, Supplied In Case - Metav IndustryLine
Take advantage of a large-range, corrosion‑resistant caliper that combines practical reach and robust vernier accuracy to keep workshop inspections efficient. The stainless steel construction and precise vernier graduations ensure reliable inside and outside measurements of brake drums and similar components; order directly via Metav Werkzeuge or contact our consultants for application advice. Brake-drum Caliper M201.185 (500×150 mm, stainless steel) — Metav IndustryLine analogue precision caliper for inside and outside measurement A Brake-drum Caliper M201.185 designed for measuring brake drums and large components with sturdy stainless steel construction and vernier accuracy for repeatable workshop control Stainless steel construction for corrosion resistance Measuring range: 0–500 mm external, 50–550 mm internal Vernier: 0.05 mm external, 0.1 mm internal resolution Locking screw for stable and repeatable readings Robust design for demanding workshop measurements The caliper's stainless steel body provides long-term resistance to workshop conditions while keeping the measuring surfaces stable. Built as an analogue vernier caliper, it delivers a reliable balance between mechanical durability and straightforward operation. The robust frame reduces flex over its 500 mm external span, making it suitable where repeatability across larger components is essential. The included locking screw secures the slider for consistent readings during transfer and comparison, which shortens inspection cycles and reduces rework. Precision where it matters: vernier layout and accuracy Equipped with a traditional vernier scale, the tool offers 0.05 mm resolution on external measurements and 0.1 mm resolution for internal measurements, matching common workshop tolerances. The stated nominal accuracy of ±0.15 mm corresponds to a level of performance appropriate for heavy‑duty measurements such as brake drums, housings and cast components where an analogue instrument is preferred. The vernier arrangement is easy to read after a short familiarisation, which supports faster throughput in repetitive quality checks. Practical range for larger components Classified at the threshold of the large‑range category, this caliper covers external measurements up to 500 mm and internal spans from 50 to 550 mm, bridging bench work and larger subassemblies. That reach makes it a pragmatic choice for vehicle service shops, maintenance departments and fixture checks where an extended jaw length (150 mm) is required to access deep bores or drum contours. The combination of reach and stiffness reduces the need for auxiliary gauges, simplifying measurement workflows. Workshop compatibility and everyday benefits As an analogue instrument, the caliper requires no batteries and offers immediate readiness for on‑the‑spot inspections. The stainless construction minimises corrosion risk, and the clear vernier graduations facilitate quick decisions at the bench. Together these attributes support a rational approach to quality control: faster inspections, fewer measurement steps and predictable results that integrate smoothly with existing test plans. Contact Metav Werkzeuge today for tailored advice on integrating the Metav IndustryLine Brake‑drum Caliper M201.185 into workshop workflows and to confirm availability from our Emmerich supply hub. Technical Data Article number: M201.185 GTIN: 4054469101002 eClass: 21170344 Customs tariff code: 90173000 Facts Measuring range external: 0–500 mm Measuring range internal: 50–550 mm Jaw length: 150 mm Vernier resolution: 0.05 mm (external), 0.1 mm (internal) Nominal accuracy: ±0.15 mm Analog instrument (vernier type) Special features Material: stainless steel (inox) Suitable for inside and outside measurement of brake drums and similar parts Locking screw for stable measurement transfer Designed for workshop and maintenance environments FAQ Is this caliper suitable for measuring brake drums and deep bores? Yes. The Brake‑drum Caliper M201.185 is designed for inside and outside measurement with a long jaw length and a measuring range that accommodates brake drums and comparable components. What resolution and accuracy can be expected from this analogue caliper? The instrument provides 0.05 mm resolution for external measurements and 0.1 mm resolution for internal measurements, with a nominal accuracy of ±0.15 mm, appropriate for heavy‑duty workshop checks. Does the caliper require batteries or electronic maintenance? No. Being an analogue vernier caliper, the Metav IndustryLine Brake‑drum Caliper M201.185 operates without batteries and is ready for immediate use after basic calibration verification. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Precision calipers for accurate, repeatable measurement
Calipers are the indispensable length-measuring tools for industry and workshop environments, enabling fast and exact external, internal, depth and step measurements. Our professional range of precision calipers, including vernier calipers, dial calipers and digital calipers, combines mechanical robustness with modern data handling to support consistent quality assurance.
How these calipers work and where they help most
Analogue vernier calipers deliver reliable, autarkic operation via the vernier scale and are best suited to heavy-duty workshop use where durability matters. Digital calipers provide a contrast-rich display, minimise reading errors and speed up inspection routines through functions such as zero setting and data output. At the high end, touchscreen calipers from Microtech feature an integrated microcomputer, colour touch display, built-in error-tolerance checks and wireless data transmission, making them suited for Industry 4.0 workflows. Workshop calipers with extended measuring ranges offer optional fine adjustment and rounded tips for interior measurements, while in-built calipers can be mounted directly to machines or test rigs to monitor travel. Specialty calipers cover tasks such as deep grooves, pipe wall thickness, brake disc inspection, three-point measurements and bespoke geometries.
Tangible benefits that improve production performance
- Faster throughput: digital calipers with data output reduce manual entry and accelerate quality checks.
- Higher repeatability: robust mechanical design and error-tolerance controls raise measurement consistency.
- Flexible integration: wireless data transmission and touchscreen operation simplify digitisation to existing systems.
- Reduced downtime: workshop and in-built variants with fine adjustment minimise rework and set-up time.
- Application coverage: specialty calipers adapt to complex geometries, from three-point checks to deep-niche measurements.
Microtech and metav — quality and supply you can rely on
For high-end, touchscreen-equipped instruments, Microtech represents the technological benchmark thanks to its integrated controls and wireless capabilities. As a precision partner, Metav complements this with decades of experience and a comprehensive offering: more than 250,000 products, a European quality filter in Emmerich and the trust of over 48,000 customers, making Metav a sensible central source for calipers and measuring equipment.
Quick summary
Calipers — from analogue vernier to touchscreen digital — deliver the measurement accuracy and data connectivity modern production demands while reducing inspection time and improving repeatability.
FAQ
What are the main differences between analogue and digital calipers?
Analogue vernier calipers rely on a vernier scale and are prized for ruggedness and independence from power, whereas digital calipers provide a contrast display, zero setting and data output to eliminate readout errors and speed up quality processes.
Can calipers be integrated into a digital inspection workflow?
Yes. Many digital calipers and touchscreen models support data output and wireless data transmission, enabling direct transfer of measurements into quality-management systems or statistical process control.
Which caliper type is best for large measuring ranges in a workshop?
Workshop calipers with extended measuring ranges and optional fine adjustment are designed for large components; they maintain mechanical stability and are available with rounded interior jaws for safer internal measurements.
Are there calipers for specialised geometries like deep grooves or brake discs?
Specialty calipers are explicitly engineered for such tasks. They feature tailored measuring faces for deep-niche measurements, pipe wall thicknesses, brake-disc checks and three-point or flexible geometries.
How do touchscreen calipers from Microtech improve quality control?
Microtech touchscreen calipers combine an integrated microcomputer, colour touch display and built-in error-tolerance checks with wireless data transmission, allowing immediate verification, reduced human error and seamless digitisation in line with Industry 4.0 practices.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com