Precision calipers for reliable industrial measurement
Precision calipers and their variants provide fast, repeatable outside, inside, depth and step measurements to ensure component conformity and process control on the shopfloor, combining mechanical robustness with digital data handling for traceable results. Designed for use in industrial quality assurance and manufacturing, these calipers serve applications from rough workshop environments to precision inspection, with options such as analogue vernier calipers for durable, battery‑free operation and digital calipers offering clear displays and data output to speed up quality workflows. Specialist formats, including workshop calipers with extended ranges and built‑in mounting calipers for machine or fixture monitoring, extend capability to long strokes and embedded measurement tasks, while bespoke models handle deep grooves, pipe wall thicknesses and three‑point or other complex geometries. The range emphasises highest accuracy and process integration, featuring high‑end touchscreen models with integrated microcomputers, wireless data transfer and Industry 4.0 compatibility to modernise measurement and quality data capture.
500mm Workshop Caliper Without Jaw Tip For External, Internal And Step Measurement, 0.02mm Scale, Fine Adjustment, Hardened Stainless Steel, Supplied In Case - Metav IndustryLine
Take advantage of a robust hardened stainless steel construction and a 0–500 mm measuring range to bridge bench work and larger assembly checks with consistent repeatability; the built‑in fine‑adjustment screw and precise vernier reading ensure reliable, reproducible results across external, internal and step measurements. Order the M201.315 directly via Metav Werkzeuge or consult our specialists for specification matching. M201.315 Workshop Caliper — analogue vernier, 0–500 mm, 0.02 mm The M201.315 is an analogue workshop caliper designed for medium‑range measuring tasks in metalworking and assembly environments, suitable for external, internal and step measurements where mechanical stability and readable precision are essential. Hardened stainless steel with matt‑chrome scale Precise vernier: 1/50 mm (0.02 mm) resolution Fine‑adjustment screw for gentle, exact closing Delivered in a transport case for safe handling Reliable medium‑range performance for workshop workflows This caliper covers a 0–500 mm measuring span, placing it in the medium category that balances reach and stiffness for everyday machine‑shop use. The monoblock construction reduces flex and improves repeatability when measuring larger fixtures, housings or workpieces compared with shorter, less rigid tools. The hardened stainless steel body and matt‑chrome scale resist wear and reduce reflection under bright workshop lighting, so the scale remains legible over long service intervals. These characteristics translate directly into fewer rechecks and more consistent production throughput. Readable, mechanical accuracy without electronics As an analogue vernier instrument, this caliper provides a tactile, battery‑free measurement method appreciated for its reliability in harsh or oil‑contaminated environments. The vernier system offers a 1/50 mm (0.02 mm) reading step on the metric scale and an imperial scale of 1/1000 inch for cross‑reference; this combination supports mixed‑unit documentation without the need for conversion tools. The tool conforms to the factory Werksnorm, giving a predictable baseline for in‑house quality procedures and routine checks, while the fine resolution suits careful workshop quality control where mechanical accuracy is expected. Designed for precise handling in daily use Ergonomics and fine control are central to the caliper’s design: a dedicated fine‑adjustment screw makes incremental closing smooth and prevents overshoot when setting jaws on delicate surfaces. The 150 mm jaw length provides ample contact area for stable external measurements, while the slender jaw tips allow confident internal and step measurements. Supplied in a dedicated transport case, the instrument is protected during storage and transit, reducing the risk of shock or corrosion that can compromise a workshop’s measurement standard. For teams standardising measurement tools across benches, this caliper offers straightforward handling and consistent results. Built for durability and practical workshop standards The combination of a hardened stainless steel frame, matt‑chrome graduation and monoblock design keeps maintenance demands low and service life high, supporting continuous shop use. The caliper’s capability for external, internal and step measurement consolidates three common functions in one robust instrument, reducing tool changes and saving time between operations. Supplied under the Werksnorm production standard and distributed through Metav IndustryLine, the instrument suits workshops that require dependable, no‑frills measuring equipment that performs under daily service conditions. Contact Metav Werkzeuge today to discuss specification matching, ordering and delivery of the Metav IndustryLine M201.315 workshop caliper, supplied with transport case and factory standard documentation. Technical Data Article number: M201.315 GTIN: 4054469101347 Brand: Metav IndustryLine Type: Analogue vernier caliper Facts Measuring range: 0–500 mm Resolution: 0.02 mm Vernier scales: 1/50 mm and 1/1000 inch Jaw length: 150 mm Tariff number: 90173000 Special features Material: stainless steel, hardened; matt‑chrome scale Monoblock construction Fine‑adjustment screw Suitable for external, internal and step measurements Delivery in transport case Factory standard: Werksnorm FAQ How precise is the caliper for workshop checks? The M201.315 provides a mechanical reading step of 0.02 mm via its vernier scale (1/50 mm), placing it in the high‑precision bracket for analogue calipers used in machine‑shop quality checks. Can the caliper measure internal and step dimensions as well as external ones? Yes; the design supports external, internal and step measurements, making the tool versatile for common workshop tasks without the need for multiple instruments. Is the instrument supplied ready for use or does it require initial calibration? The instrument is supplied to Werksnorm (factory standard). If a specific accredited calibration certificate is required, please discuss options with Metav Werkzeuge prior to purchase. What makes the caliper suitable for daily shop use? Durable hardened stainless steel, a monoblock frame and a fine‑adjustment screw combine to deliver stable, repeatable contact and easy handling under routine workshop conditions. Does the delivery include protection for transport and storage? The caliper is supplied in a dedicated transport case, which protects the measuring faces and scale during shipment and storage, reducing the risk of damage and preserving accuracy. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
500mm Workshop Caliper Without Point 250mm Jaws 0.05mm Vernier Fine Adjustment Monoblock Stainless Steel Matt Chrome Scale, in Case - Metav IndustryLine
Take advantage of the combination of robust monoblock construction, precise fine adjustment and a 0–500 mm measuring range for reliable workshop measurement tasks; order the caliper directly via Metav Werkzeuge or consult the team for application advice. Workshop Vernier Caliper M201.325.2 — 0–500 mm range, hardened stainless steel (Metav IndustryLine) The Workshop Vernier Caliper M201.325.2 is an analogue caliper intended for medium‑range workshop measurements up to 500 mm, offering a rigid monoblock design and a fine‑adjustment mechanism for controlled, repeatable readings. Hardened stainless steel construction 0–500 mm measuring range Fine‑adjustment thumb screw Monoblock for high rigidity Reliable accuracy for everyday workshop control Built for frequent use, this analogue caliper combines a monoblock frame with hardened stainless steel to limit flex and wear during repeated handling. The vernier arrangement provides a clear 0.05 mm resolution, which aligns with common workshop tolerances and supports reliable go/no‑go decisions on the production floor. The fine adjustment ensures the jaws close smoothly, reducing overshoot and operator‑induced error; this makes the instrument particularly suitable where steady, reproducible contact is required without resorting to electronic instruments. Medium‑range capability for larger assemblies Classified in the Medium category (measuring range 300–500 mm), the caliper bridges the gap between compact gauges and long‑reach instruments. The 0–500 mm span and jaw length 250 mm allow secure contact on larger fixtures, housings and assemblies while keeping handling manageable for a single operator. Conformity to DIN 862 is observed for shorter jaw variants, and for the longer jaw geometry this unit is manufactured to the works standard to preserve reliable measuring characteristics across the full range. Practical features that speed daily workflows The analogue vernier includes a dual reading arrangement (top and bottom scales) that supports imperial and metric cross‑checks in workshops that still reference both systems. The matt‑chrome scale reduces glare under workshop lighting and supports fast reading, while the sturdy thumb screw fine‑adjustment offers micro‑control during closing and setting operations—translating directly into fewer remeasures and faster cycle times. The overall design prioritises robustness and serviceability, making it a pragmatic choice for production, maintenance and jobbing shops where straightforward, dependable measurement is required. Discuss the Metav IndustryLine caliper with Metav Werkzeuge for tailored advice — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: M201.325.2 GTIN: 4054469101514 Brand: Metav IndustryLine Facts Measuring range: 0–500 mm Resolution: 0.05 mm Jaw length: 250 mm Vernier: 1/128" top; 1/20 mm bottom Special features Material: hardened stainless steel with matt‑chrome scale Monoblock construction Fine‑adjustment thumb screw Compliance: DIN 862 up to 200 mm; from 250 mm according to works standard Analogue vernier caliper for workshop use FAQ What measuring range does the caliper cover? The M201.325.2 caliper covers a 0–500 mm measuring range, placing it in the Medium category for workshop use. What resolution and reading increment does the instrument offer? Resolution is 0.05 mm, provided by the analogue vernier arrangement with dual scales for practical workshop readings. Is the caliper suitable for heavy everyday use? Yes. The monoblock construction and hardened stainless steel material are specified to withstand routine workshop handling and maintain dimensional stability. Does the caliper comply with recognised standards? The design follows DIN 862 for shorter jaw lengths; for the longer jaw geometry of this model, production is carried out to the manufacturer’s works standard to ensure consistent behaviour across the full range. How is fine positioning achieved during measurement? A dedicated fine‑adjustment thumb screw is integrated to allow controlled jaw movement and repeatable clamping pressure, reducing operator error during setting. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
500mm Workshop Caliper Without Point Fine Adjustment Monoblock Stainless Steel 0.05mm Resolution DIN 862 - Metav IndustryLine
Reliable workshop precision meets robust construction: the combination of a hardened stainless steel monoblock frame, a fine-adjustment screw and a vernier readout with 0.05 mm resolution ensures stable, repeatable medium-range measurement. Order the caliper directly via Metav Werkzeuge or consult the technical advisors for specification matching. Workshop Vernier Caliper M201.325.1 — 0–500 mm, Monoblock, Fine Adjustment (Metav IndustryLine) The Workshop Vernier Caliper M201.325.1 is a medium-range measuring instrument designed for general machine‑shop use, offering a stiff monoblock frame and precise mechanical adjustment for reliable everyday inspection. Hardened stainless steel construction Precise fine-adjustment screw Monoblock frame for improved stiffness Vernier readout with 0.05 mm resolution Durable construction for consistent shop-floor performance The caliper’s hardened stainless steel body with a matt‑chromed scale is engineered to resist wear and minimise surface reflections, supporting long service life under regular workshop conditions. The monoblock design increases profile stiffness so that measurements remain stable across the full 0–500 mm range; this classifies the instrument as a medium-range caliper, which is particularly useful where reach and rigidity must be balanced. The integrated fine-adjustment mechanism allows controlled closing of the jaws for repeatable contact force and faster setup of routine checks. Mechanical accuracy explained for dependable results As an analogue vernier instrument, the caliper provides a reading accuracy determined by its vernier graduations: the lower scale corresponds to a metric vernier giving 0.05 mm increments, while a secondary vernier on the upper jaw runs to 1/128 inch for imperial reference. The instrument meets DIN 862 specifications for jaw lengths up to 200 mm; longer jaw versions from 250 mm are manufactured to the supplier’s factory standard. For workshop metrology this means straightforward, traceable readings from a robust mechanical instrument without reliance on electronics, making it ideal for environments where simplicity and serviceability matter. Practical handling, protection and lifecycle benefits The caliper is supplied as a ready-to-use workshop tool and is delivered in a transport case to protect the measuring faces during storage and transit. A jaw length of 200 mm provides practical access to a wide variety of components, while the overall mass and construction contribute to steady handling during measurement. The matt‑chromed scale eases visual reading and reduces glare under shop lighting; routine care—keeping the sliding surfaces clean and lightly oiled—maintains accuracy and extends service intervals. The combination of robust materials and mechanical fine adjustment supports efficient inspection routines and dependable repeatability on the shop floor. For precise medium-range measurement rely on Metav IndustryLine’s monoblock caliper; contact Metav Werkzeuge in Emmerich for product matching or ordering at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M201.325.1 GTIN: 4054469101507 Manufacturer: Metav IndustryLine Numbers / Core technical data Measuring range: 0–500 mm Max measuring range: 500 mm Jaw length: 200 mm Weight: 4.3 kg Resolution: 0.05 mm Design / Special features Material: hardened stainless steel, matt‑chromed scale Monoblock frame construction Fine‑adjustment screw Vernier scales: 1/128" (top) and 1/20 mm (bottom) Compliance: DIN 862 up to 200 mm; factory standard from 250 mm Supplied in a transport case Without pointed jaw tips Analogue (mechanical) vernier readout FAQ What measuring range does this caliper cover? The instrument covers a 0–500 mm span, placing it in the medium‑range category suitable for many machine‑shop and fixture tasks; product SKU: M201.325.1. What resolution and vernier graduations are provided? Resolution is 0.05 mm, derived from the metric vernier; the caliper also carries a secondary vernier of 1/128 inch for imperial reference. What is the caliper made from and how durable is it? The caliper is manufactured from hardened stainless steel with a matt‑chromed scale, offering corrosion resistance and wear durability for workshop use. Is a protective case included with delivery? Yes, the tool is supplied in a transport case to safeguard the measuring faces and sliding surfaces during storage and transport. Which environments and applications suit this caliper best? This monoblock, fine‑adjustment caliper is intended for general machine shop inspection, jig and fixture checking, and routine quality control where a robust, repeatable mechanical measurement is required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
500mm Workshop Digital Caliper Long Jaw, Colour 2.4" Touchscreen, ISO 17025 Calibrated - Microtech Metrology
Benefit from fast integration into digital workflows and factory traceability thanks to ISO 17025 calibration and a reliable Wireless+USB data path; the long 100 mm jaw and 0–500 mm measuring range ensure versatile mid‑range coverage for production and fixture work. Order the workshop caliper directly through Metav Werkzeuge or consult our advisors for tailored specifications. Workshop Caliper by Microtech Metrology — 0–500 mm, 2.4" Touchscreen The Workshop Caliper is a digital measuring instrument for medium‑range workshop and toolroom tasks, designed to combine fast data capture with traceable calibration for production use. Digital colour 2.4" touchscreen display 0–500 mm medium-range measuring capacity ISO 17025 calibrated with certificate Wireless + USB data output for traceability Traceable precision that speeds inspection This instrument delivers industrially relevant resolution of 0.01 mm, combined with ISO 17025 calibration and an included certificate, which removes uncertainty during incoming inspection and quality control. The certified calibration documents traceability to national standards, making the device suitable for parts validation and audit trails. With a defined measurement force 1–20 N, the caliper provides consistent contact pressure that reduces operator variability and supports repeatable measurements over time. Greater reach for larger components with workshop comfort Classified as a medium range instrument (maximum measuring length up to 500 mm), the tool closes the gap between compact shop gauges and large‑format instruments. The 100 mm long measuring jaw extends reach into deeper recesses and over larger flanges, while the robust build absorbs everyday handling in fixture and mould work. Handmade measuring jaws provide precise contact geometry, improving stability on both external and step measurements and ensuring longer service life in a busy workshop. Seamless digital data capture for modern production Equipped with a Colour 2.4" touchscreen and Wireless+USB data output, the caliper integrates into digital measurement routines effortlessly. Measurements can be transmitted directly to inspection software or logged via USB, reducing transcription errors and accelerating reporting. The responsive display and tactile interface speed up batch measurements and make read‑outs clear even in varied lighting conditions, improving throughput in quality checks. Built and documented for professional workflows The instrument combines practical durability with documentation that meets professional expectations: a factory ISO 17025 calibration certificate is supplied, confirming the device is ready for formal use in traceable measurement chains. The solid construction and carefully finished jaws support repeated inside, outside and step measurements without quick wear, while the digital electronics keep the workflow contemporary and auditable. For workshops seeking dependable tools that tie into statistical process control, this caliper offers a balance of reach, repeatability and digital connectivity. Contact Metav Werkzeuge in Emmerich for specification matching, delivery options and documentation queries — Metav’s advisors can confirm suitability for specific applications and arrange purchase or technical briefing via info@metav-werkzeuge.com Technical data Article number: 141005216 GTIN: 4061905038808 Manufacturer: Microtech Metrology Facts Measurement range: 0–500 mm Resolution: 0.01 mm Measurement force: 1–20 N Jaw length: 100 mm Display size: 2.4" colour touchscreen Special features Data output: Wireless + USB Handmade measuring jaws Delivered with ISO 17025 calibration certificate Digital caliper suitable for workshop and production use Category: Medium range caliper (300–500 mm) FAQ Is the caliper supplied ready for traceable measurement? Yes. The Workshop Caliper from Microtech Metrology is delivered fully calibrated with an ISO 17025 certificate, enabling immediate use in traceable inspection procedures (SKU 141005216). Which interfaces are available for data transfer? Measurements can be exported via the Wireless+USB outputs; the instrument supports direct USB logging and wireless transfer to compatible inspection systems. What measurement accuracy and resolution can be expected? The device provides a 0.01 mm resolution. Combined with the supplied ISO 17025 calibration, this gives reliable repeatability for standard workshop quality checks. Can the caliper measure inside, outside and step dimensions? Yes. The caliper is a multi‑function instrument capable of inside, outside and step measurements using its precisely finished jaws. Is the jaw design suitable for heavy‑duty workshop use? The caliper features handmade measuring jaws, designed for robust contact geometry and improved longevity in regular workshop operations. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
500mm Workshop Precision Caliper With Pointed Jaws, Fine Adjustment, Monoblock, 0.05mm - Metav IndustryLine
Take advantage of the combination of robust monoblock construction, a 500 mm measuring range and precise fine adjustment to secure reproducible workshop measurements; order directly via Metav Werkzeuge or consult the technical team for application guidance. Metav IndustryLine Workshop Caliper M201.335 — 500 mm, Fine Adjustment, Monoblock The M201.335 workshop caliper is an analogue vernier caliper designed for workshop use and medium-format component measurement, providing sturdy handling and metric/imperial vernier reading. 500 mm measuring range for larger assemblies Hardened stainless steel with matt chrome scale Precise fine-adjustment thumb screw Vernier dual-scale: 1/128" and 1/20 mm Robust measurement reach with controlled stiffness The caliper's 500 mm measuring range places it in the medium class for workshop calipers, offering the reach required for larger fixtures and housings while retaining manageable stiffness and handling. The monoblock frame reduces torsion and flex during measurement, translating the operator's movement into stable contact conditions. A hardened stainless-steel construction with a matt-chrome scale ensures long-term legibility and resistance to workshop environments, so measurements stay consistent over repeated use. Precise setting and readable vernier scales Equipped with a fine adjustment mechanism, the instrument enables controlled approach to the measuring faces for repeatable results, particularly useful when small positional changes matter. The analogue vernier combination provides both imperial and metric reference: a top scale at 1/128" and a bottom scale at 1/20 mm, yielding an effective nominal resolution of 0.05 mm. These characteristics make the caliper well suited to general machine‑shop tasks where robust, easily interpreted measurement data is required rather than laboratory-level submicron resolution. Workshop-oriented features that simplify handling The caliper is supplied with pointed measuring tips to aid access to grooves and recesses, while the 150 mm jaw length improves reach into deeper bores and steps without sacrificing control. Compliance with DIN 862 for the applicable jaw length confirms that the measuring faces and nonius meet recognised workshop standards for form and function. Delivery includes a protective case for transport, reducing the risk of damage in daily workshop use and supporting repeatable, reliable readings across the production chain. For reliable shop metrology and ordering information, contact Metav Werkzeuge — eMail: info@metav-werkzeuge.com or Tel: +49 2822 7131930 for technical advice and supply options Technical data Article number: M201.335 GTIN: 4054469101736 Brand: Metav IndustryLine Measuring range: 0–500 mm Jaw length: 150 mm Resolution / vernier: 0.05 mm (1/20 mm) and 1/128" Material: stainless steel, hardened, matt-chrome scale Norm: DIN 862 (valid for the given jaw length) Facts Measuring range (numeric): 500 mm Jaw length (numeric): 150 mm Resolution (numeric): 0.05 mm Zolltarifnummer: 90173000 Special features Monoblock single-piece construction Fine-adjustment thumb screw Pointed measuring jaws for grooves and steps Analogue vernier (metric and imperial scales) Protective transport case included FAQ What measuring tasks are best suited to this caliper? The M201.335 workshop caliper from Metav IndustryLine is intended for medium‑format workshop tasks such as measuring housings, spacers and fixtures where a 500 mm reach and robust handling are required. Does the caliper meet recognised standards? Yes. The caliper's design and measuring faces conform to DIN 862 for the applicable jaw length, ensuring workshop‑grade tolerances and interchangeability. Which materials is the caliper suitable for inspecting? The caliper is a general‑purpose measuring tool for dimensional checks on metal and engineered components; material compatibility is determined by the inspection task rather than the caliper itself. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
50mm Brake Disc Gauge 80mm Jaw Matt Chrome Nonius 0.1mm, Stainless Steel - Metav IndustryLine
Take advantage of a compact, purpose-built inspection tool that combines stainless-steel durability, a 0–50 mm measuring range and an 80 mm jaw length for reliable brake-disc thickness checks; order directly via Metav Werkzeuge or consult our specialists for application advice. M201.182 Brake-disc Gauge — Analogue caliper with vernier 0.1 mm (Metav IndustryLine) The M201.182 Brake-disc Gauge is a compact analogue caliper engineered for quick, repeatable thickness checks on rotors and brake discs in workshop and maintenance settings Stainless-steel, matt chrome finish Vernier scale 0.1 mm resolution 0–50 mm range with 80 mm jaws Compact precision for routine inspection Built for compact, repeatable measurements, this analogue caliper delivers straightforward vernier reading at 0.1 mm and an indicated accuracy of 0.2 mm, making it suited to visual inspection and basic quality-control tasks. The tool’s stainless-steel construction and matt chrome finish resist workshop wear and light corrosion, so measurement geometry remains stable over frequent use. Classified within the micro-range (measuring capacity under 100 mm), it combines reach and stiffness appropriate for precise thickness checks without excess bulk, helping maintain production flow and reduce rework. Robust construction that supports uptime The caliper’s stainless build and solid jaw geometry provide tactile stability during clamping and reading, reducing operator-induced variation. With 80 mm jaws, it can bridge typical rotor profiles while keeping deformation minimal; this benefits repeatability on stepped surfaces. The analogue vernier system avoids battery dependence and simplifies field inspections, delivering a low-maintenance solution for service bays and maintenance shops. The result is a durable measuring instrument that supports continuous workshop operation with minimal downtime for upkeep. Ergonomic handling for faster checks Designed for rapid use, the tool’s compact frame and clear vernier layout speed up routine checks and assembly inspections. The non-slip finish and balanced jaw length permit confident one-handed control for fast pass/fail assessment during maintenance rounds. Supplied in a protective case for transport, it is ready for bench or mobile workshops and easy to store between shifts. For teams that prioritise straightforward, dependable instruments, this caliper reduces complexity while keeping measurement practice consistent. For practical, workshop-ready measuring tools and ordering support for the M201.182 Brake-disc Gauge, contact Metav Werkzeuge in Emmerich for tailored advice and procurement assistance Technical data Article number: M201.182 GTIN: 4054469100975 Material: stainless steel (INOX) Measuring range: 0–50 mm Jaw length: 80 mm Scale type: vernier (Nonius) 0.1 mm Type: analogue caliper Finish: matt chrome Tariff number: 90173000 Category: caliper / Messschieber eClass: 21170344 Packaging: supplied in protective case Facts Reading / resolution: 0.1 mm Indicated accuracy: 0.2 mm Measuring range min: 0 mm Measuring range max: 50 mm Jaw length: 80 mm Special features Analogue vernier scale Micro-range caliper (compact, high stiffness) Corrosion-resistant stainless-steel construction Matt chrome surface treatment Supplied in a transport case Suitable for routine brake-disc thickness checks FAQ Is this caliper suitable for measuring brake-disc thickness? Yes. The M201.182 brake-disc gauge is designed for rotor and disc thickness inspections within a 0–50 mm range and is suitable for routine workshop checks. What resolution and accuracy does the instrument offer? The instrument uses a vernier scale with a resolution of 0.1 mm and an indicated accuracy of 0.2 mm, providing reliable readings for standard maintenance and inspection tasks. Is the measuring tool corrosion-resistant? The caliper is manufactured from stainless steel with a matt chrome finish, offering enhanced resistance to workshop environments and extended service life. Does the product include a case for transport? Yes. The gauge is supplied in a protective case suitable for transport and storage, ensuring the instrument remains protected between uses. Can this analogue caliper replace digital gauges in a workshop? For basic thickness checks and quick pass/fail inspections, the M201.182 analogue gauge provides a low-maintenance, battery-free alternative that is robust and simple to use. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
50mm Brake Disc Gauge Three-Point, Stainless Steel Matt Chrome Vernier 0.1mm, Supplied in Case - Metav IndustryLine
Benefit from a robust stainless-steel build, a 0–50 mm measuring range with Vernier 0.1 mm reading, and a protective transport case for secure handling. Combine reliable mechanical measuring performance and workshop-ready durability for consistent inspection results. Order the brake-disc gauge directly via Metav Werkzeuge or consult our specialists for technical advice. M201.180 Brake-disc gauge (stainless steel, Vernier 0.1 mm) — Metav IndustryLine The M201.180 Brake-disc gauge is a compact mechanical caliper designed for quick thickness and run‑out checks on small brake discs and rotors in workshop and inspection environments. Robust stainless steel construction Vernier scale, 0.1 mm resolution Measuring range 0–50 mm Delivered in protective transport case Reliable readings for routine inspection tasks The caliper delivers a practical combination of precision and simplicity: a Vernier scale with 0.1 mm reading ensures repeatable measurements for everyday quality checks, while an industrial accuracy class of 0.2 mm provides a trustworthy error margin for workshop inspection. Its compact measuring span of 0–50 mm makes it especially suitable where short-range checks are frequent, for example assessing disc thickness or checking minimal run‑out on rotors. The mechanical design avoids electronic dependencies and is therefore resilient to harsh shop-floor conditions. Built to withstand workshop use and protect the instrument Constructed from stainless steel (INOX) with a matte chrome finish, the gauge resists corrosion and maintains dimensional stability under regular handling. A 50 mm jaw length offers sufficient contact area for disc edge and surface measurements while keeping the tool manoeuvrable in confined spaces. Delivery in a protective transport case reduces the risk of damage during storage or transit and keeps the caliper ready for immediate use. These characteristics combine to reduce downtime and help maintain measurement reliability across repeated checks. Practical tool for fast decision-making on the shop floor As an analog mechanical Vernier caliper, this inspection gauge provides tactile feedback and an intuitive readout that experienced technicians value for quick assessments. The instrument is optimised for brake-disc applications and similar rotating components where fast pass/fail decisions are needed. Its straightforward operation supports efficient process control and helps integrate measurements into established workshop routines without additional training or software. For teams prioritising robust, no-frills reliability, this gauge offers a dependable means to verify component condition during maintenance and assembly. For workshop-ready precision from Metav IndustryLine, request technical guidance or arrange delivery from Metav Werkzeuge at our Emmerich location via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: M201.180 GTIN: 4054469100944 eClass: 21170344 Tariff number: 90173000 Facts Measuring range: 0–50 mm Resolution / reading: 0.1 mm Accuracy: 0.2 mm Jaw length: 50 mm Special features Material: stainless steel (INOX) Finish: matte chrome-plated Scale type: Vernier (nonius) Delivery: protective transport case Type: analog mechanical caliper FAQ What measurements can this gauge perform? The M201.180 brake-disc gauge performs external thickness checks and run‑out assessments across a 0–50 mm range using a Vernier scale for 0.1 mm reading. Is the instrument suitable for workshop use on vehicle brake discs? Yes, the caliper is designed for routine workshop inspections and is robust enough for repeated use on small brake discs and similar components. How is the gauge delivered to protect it during transport? Delivery includes a protective transport case to prevent damage and to keep the instrument ready for immediate use. Does the instrument require batteries or calibration equipment? The gauge is an analogue mechanical Vernier caliper and does not require batteries; calibration information is available on request from Metav Werkzeuge. Can the caliper measure internal features as well as external thickness? The mechanical design allows standard external and internal checks appropriate to the specified measuring range for inspection tasks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
50mm Digital Brake Disc Caliper With 50mm Beak, Hold Function, Stainless Hardened Steel, 0.01mm Resolution - Metav IndustryLine
Take advantage of a hardened stainless steel construction, a specialised 50 mm beak for brake-disc inspection and 0.01 mm display resolution to secure fast, repeatable thickness checks. Order directly via Metav Werkzeuge or consult the team for application advice. M240.180 Digital Brake-Disc Caliper – 0–50 mm, 50 mm beak (Metav IndustryLine) The M240.180 is a purpose-made digital caliper for brake-disc measurement, combining a compact 0–50 mm measuring range with a long beak and intuitive hold function for reliable workshop checks. Hardened stainless steel construction 50 mm beak for brake-disc measurement Digital display with HOLD and mm/inch selection RB 2 data output for process documentation Accurate measurement where it matters This caliper delivers a clear 0.01 mm resolution on a digital readout, providing the precision needed for brake-disc thickness checks and safety-critical maintenance. The instrument belongs to the micro measuring class (range up to 100 mm), which is ideal when short, stiff jaws and fine control are required. The combination of small measuring range and high display resolution reduces measurement uncertainty and speeds up decision-making in routine inspections. Robust build for everyday workshop use The slider and jaws are manufactured from hardened stainless steel, giving corrosion resistance and long-term wear stability in busy workshop environments. At approximately 0.33 kg, the tool offers a reassuring feel without being cumbersome, enabling steady, single-handed operation during repeated measurements. The robust construction translates directly into fewer rework cycles and lower long-term maintenance costs. Practical display and data handling for efficient workflows A concise digital interface provides ON/OFF, mm/inch, HOLD and ZERO functions so readings can be locked, converted and zeroed quickly. The device also offers RB 2 data output for integration into documentation or statistical process control; this supports traceable records and smoother quality audits. Inch resolution is 0.0005 in, allowing compatibility with drawings and suppliers that use imperial units. Compact dimensions, clear application advantages With a 50 mm beak specifically shaped for brake-disc measurement, the caliper reaches into recesses and measures thickness profiles that standard jaws cannot. Its compact design suits frequent spot checks, post-service inspections and production-line sampling where rapid, repeatable readings are essential. The tool thus serves technicians, maintenance teams and quality inspectors who need a focused, dependable instrument. Contact Metav Werkzeuge for delivery details, application guidance and to discuss how this caliper fits into existing inspection routines Technical Data Article number: M240.180 GTIN: 4054469112961 Weight: 0.33 kg Facts Measuring range: 0–50 mm Resolution: 0.01 mm / 0.0005 in Beak length: 50 mm Data output: RB 2 Special features Hardened stainless steel construction Digital display with ON/OFF, mm/inch, HOLD and ZERO Specialised for brake-disc measurement Compact micro-range caliper for fine tasks FAQ What measuring range and resolution does the M240.180 offer? The M240.180 caliper measures from 0 to 50 mm with a display resolution of 0.01 mm (0.0005 in), suitable for fine workshop inspections. Is this caliper suitable for brake-disc thickness checks? Yes — the instrument features a 50 mm beak specifically designed for brake-disc measurement, enabling reliable thickness readings in service and inspection tasks. Can measurement data be exported for quality documentation? Measurement values can be transmitted via the RB 2 data output, allowing the caliper to feed results into documentation systems or SPC workflows. What material is the caliper made from and how durable is it? The caliper is manufactured from hardened stainless steel, offering corrosion resistance and long-term mechanical stability for frequent use. Which display functions assist with workshop handling? The digital readout includes ON/OFF, mm/inch conversion, ZERO and a HOLD function to lock values; these make reading, comparing and recording measurements straightforward. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
50mm Digital Radius Caliper With 0.01mm Display, Stainless Steel, 3V Power, Supplied In Case - Metav IndustryLine
Take advantage of precise radius measurement, robust stainless construction and a compact digital display for reliable inspection results in fine mechanical work; order the instrument directly via Metav Werkzeuge or consult the team for application advice. M240.091.N Digital Radius Caliper (3–50 mm) — Stainless hardened steel, digital readout A M240.091.N Digital Radius Caliper designed for precise measurement of arcs and radii in inspection and workshop environments, combining a compact profile with a clear digital readout for repeatable results. Digital display with ON/ZERO/UNIT/HOLD Resolution 0.01 mm and 0.0005 in reading Hardened stainless steel construction Includes protective transport case Precise results where small radii matter The instrument provides a measuring range of 3–50 mm, making it part of the Micro category for calipers (measuring range max 10–100 mm). This class is aimed at fine mechanical and watchmaking tasks where short jaws reduce torsion and improve repeatability. With a 0.01 mm resolution and an inch readout at 0.0005 in, the digital readout gives immediate, unambiguous values; the standard push-button set (ON/ZERO/UNIT/HOLD) supports quick switching between units and temporary value retention, which speeds up routine inspections while reducing transcription errors. Built for workshop durability and repeatable handling Manufactured from hardened stainless steel with a robust metal housing, the gauge withstands everyday workshop conditions while maintaining measurement stability. The relatively low weight of 0.4 kg and compact form factor support single-handed operation during assembly checks and tooling set-up. Delivered in a protective case, the instrument is protected during transport and storage, preserving calibration and surface finish so that measurement drift is kept to a minimum and service intervals can be planned reliably. Data compatibility and practical operation Equipped with an RB 5 data output, the caliper can be integrated into data-collection workflows where traceability and electronic logging are required; the simple electrical supply via a 3 V system keeps replacement straightforward. The digital display and unit toggle accelerate measurement cycles, contributing to a more efficient quality-control process—particularly important in small-batch production or laboratory environments that demand documented measurement records. Application focus and user benefits As a specialist radius gauge, this tool excels in tasks such as checking fillet radii on machined parts, verifying bend radii on formed components and inspecting small rounded features on serial parts. The compact jaws and clear digital feedback reduce operator uncertainty and speed up decision-making during inspection rounds. For workshops seeking to democratise precision—high accuracy without complex handling—this caliper offers a pragmatic blend of usability and technical performance. Contact Metav Werkzeuge for tailored application advice and to arrange supply of the Metav IndustryLine M240.091.N radius caliper directly from Emmerich Technical data Article number: M240.091.N GTIN: 4054469160405 Weight: 0.4 kg Facts Measuring range: 3–50 mm Resolution: 0.01 mm / 0.0005 in Power: 3 V Special features Material: hardened stainless steel, metal housing Display: ON / ZERO / UNIT / HOLD buttons Data output: RB 5 Delivered in protective case FAQ What measuring range and resolution does this caliper cover? The caliper covers 3–50 mm with a resolution of 0.01 mm (0.0005 in), suitable for fine-radius inspection with clear digital readout for rapid assessment. Is the instrument suitable for workshop use and transport? Yes; the hardened stainless steel construction and included protective case provide durability for regular workshop handling and safe transport. Can measurement data be transferred to a PC or data logger? Yes, the device features an RB 5 data output for integration into electronic data-collection processes and traceability systems. What power supply does the caliper require and how is it operated? The caliper operates from a 3 V system and is controlled via the digital display using ON, ZERO, UNIT and HOLD functions for easy operation and unit changes. For which types of tasks is this radius caliper best suited? This gauge is optimised for small radii and arc checks in fine mechanical work, component inspection and quality control where compact jaws and repeatable readings are required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
50mm Digital Twist Drill Caliper 118° Cut Angle, 3V Power, Data Output RB5, Stainless Hardened Body, Supplied in Case - Metav IndustryLine
Benefit from a combination of precise digital measurement, a compact 50 mm measuring range and a hardened stainless-steel build for dependable workshop performance; order directly via Metav Werkzeuge or ask our consultants if needed. Digital Twist‑Drill Caliper M240.145 — 50 mm range, 118° twist‑drill measurement (Metav IndustryLine) The Digital Twist‑Drill Caliper M240.145 is a dedicated digital caliper for measuring the cutting length and geometry of twist drills with 118° (and compatible 130°) point angles, designed for toolrooms and routine quality checks Compact 50 mm measuring range for fine tool measurement Hardened stainless‑steel construction with metal housing Digital display with ON/OFF, ZERO, UNIT and HOLD keys RB 5 data output for process integration Precise, compact measurement that speeds up quality checks Built for tasks where repeatable small‑length measurements matter, this instrument combines a 50 mm measuring range with a robust hardened stainless‑steel frame to deliver steady results on short cutting edges. The compact design reduces lever‑action and twist on the jaws, improving reproducibility during repeated checks. The result is faster inspection cycles and fewer rejects in batch tool production, while the moderate weight (approx. 0.4 kg) eases handling in a busy metrology bench. Accurate digital readout and simple operation for reliable data The integrated digital display provides direct numerical readout and the usual control keys (ON/OFF, ZERO, UNIT, HOLD) for straightforward operation and rapid transfer of results into documentation. The measuring electronics run from a 3 V supply and the instrument features an RB 5 data output to connect to data loggers or a PC, reducing transcription errors and enabling faster reporting in quality assurance workflows. This combination supports measurable process improvements and traceable records. Designed specifically for twist‑drill inspection and workshop use Engineered to assess the cutting length of twist drills, the gauge is suited to toolshops, maintenance departments and production quality control where angle and edge length must be checked quickly. The metal housing protects the electronics in daily use, while hardened measuring faces resist wear, maintaining performance over time. Delivery includes a protective case for transport and storage to keep the instrument ready for on‑bench use. Practical partner for routine inspection and integration The caliper is classified in the micro range of workshop calipers, offering the ideal balance of reach and rigidity for small‑part metrology. Integration via the RB 5 interface streamlines data capture and supports digital traceability in production documentation. As part of Metav IndustryLine, the instrument benefits from a supplier network that emphasises consistent availability and a transparent supply chain, supporting uninterrupted inspection routines in industrial and craft environments. For RB 5 connectivity and compact precision from Metav IndustryLine, contact Metav Werkzeuge for ordering and application advice — eMail: info@metav-werkzeuge.com or Tel: +49 2822 7131930 Technical data Article number: M240.145 GTIN: 4054469168951 Brand: Metav IndustryLine Category: Twist‑drill caliper / digital caliper Facts Measuring range: 0–50 mm Weight: 0.4 kg Power supply: 3 V Customs tariff number: 90173000 Special features Material: hardened stainless steel, metal housing Digital display with ON/OFF, ZERO, UNIT, HOLD Data output: RB 5 Suitable for twist drills with 118° (compatible with 130°) point angles Delivered in a protective plastic/wooden case FAQ How does the interface transfer measurement data? The caliper uses an RB 5 data output for wired transfer to data loggers or PC systems, allowing direct capture of results from the device M240.145 into inspection software. What resolution and readout behaviour can be expected? The instrument features a standard digital readout suitable for workshop control; typical digital caliper resolution is 0.01 mm, and the display functions (ZERO, UNIT, HOLD) assist repeatable documentation. Is the caliper suitable for measuring drill cutting length only? No, the tool is intended primarily for twist‑drill cutting‑length and point geometry checks but can also be used for other small internal, external and step measurements within the 0–50 mm range. What protects the electronics and measuring faces during daily use? A metal housing shields the electronics and hardened measuring faces resist wear; the protective case supplied supports safe transport and storage between uses. Which environments and users benefit most from this instrument? The device is ideal for toolrooms, production quality control and maintenance workshops where compact, repeatable drill‑bit measurements and digital data output improve inspection efficiency. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
50mm Digital Twist Drill Caliper For 118°/130° Cutting Edge Measurement, With On/Off Null Unit Hold, RB5 Output - Metav IndustryLine
Take advantage of a compact measuring solution that combines precision, a 130° twist‑drill point measurement and a 50 mm measuring range for consistent workshop results; the instrument’s stainless steel construction and RB 5 data output support robust use and traceable data capture. Order the instrument via Metav Werkzeuge or consult our advisers for integration advice and supply from Emmerich. Digital Twist-Drill Caliper M240.146 – 130° point measurement, 50 mm range (Metav IndustryLine) The Digital Twist-Drill Caliper M240.146 is a compact workshop caliper designed to measure twist‑drill cutting length and point geometry precisely, offering a focused solution for drill sharpening and quality checks in production and maintenance environments 50 mm measuring range for micro work 130° point measurement for twist drills RB 5 data output for external logging Accuracy and build for precise drill measurement The instrument is designed for reliable measurement of twist‑drill cutting lengths and point geometry: a fixed 130° measuring angle combined with a 50 mm measuring range places the tool firmly in the Micro class (ideal for fine mechanical and toolroom work). The hardened stainless steel construction and metal display housing ensure dimensional stability and resistance to workshop wear, supporting repeatable results. This focus on robust materials reduces drift and contributes to consistent part quality during daily inspection routines. Fast digital capture and data integration for process control Equipped with a user‑friendly digital display, the caliper features ON/OFF, ZERO, UNIT and HOLD keys for rapid measurements and simple unit changes; power is supplied by a 3 V system. The dedicated RB 5 data output provides a direct path for recorded values to external loggers or SPC systems, accelerating documentation and reducing transcription errors. The combination of quick digital readout and data export supports productivity gains and tighter process control in production or service shops. Practical handling and workshop convenience With a jaw arrangement of 150/30 mm and a weight of 0.4 kg, the instrument delivers a steady grip and easy manoeuvrability for frequent checks at the bench. The compact form factor and clear ergonomics make repetitive measurement tasks less fatiguing, while the metal housing protects the electronics from knocks. The caliper is supplied in a transport case for secure handling and storage, simplifying workshop logistics and safeguarding the instrument between uses. For dependable drill‑making and sharpening inspection, contact Metav Werkzeuge to arrange supply of the Metav IndustryLine Digital Twist‑Drill Caliper M240.146 from Emmerich—call +49 2822 7131930 or e‑mail info@metav-werkzeuge.com for technical guidance and order handling Technical Data Article number: M240.146 GTIN: 4054469168968 ECLASS: 21170344 TARIC/HS code: 90173000 Data output: RB 5 Core Measurements Measuring range: 0–50 mm Weight: 0.4 kg Jaw length: 150/30 mm Power: 3 V Design & Features Material: hardened stainless steel, metal housing Measurement angle: 130° for twist drills Digital display with ON/OFF, ZERO, UNIT, HOLD Supplied in transport case FAQ What does the RB 5 data output allow? The RB 5 data output on the Digital Twist‑Drill Caliper M240.146 enables direct transmission of measured values to external data loggers or SPC systems for traceable documentation and simplified process control. Is the caliper suitable for workshop use and frequent checks? Yes. The M240.146 combines a hardened stainless steel build and a metal display housing with a compact weight of 0.4 kg, making it robust and practical for regular bench and shop‑floor measurements. Which drill geometries can be checked with this instrument? The instrument is configured for 130° point measurement typical of many twist drills; it is ideal for checking cutting length and point geometry on standard twist drills used in machining and maintenance. Does the caliper come with protective packaging? The caliper is supplied in a secure transport case to protect the instrument during storage and transit and to simplify workshop handling. How does the digital display support measurement workflow? The digital display includes ON/OFF, ZERO, UNIT and HOLD functions for quick set‑up, unit switching and stable readout capture, which reduces measurement time and operator error when documenting results. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
50mm Digitaler Hochpräziser Messschieber, 0,001mm, IP 67, Force Control, Kalibriert nach ISO 17025 - Microtech Metrology
Die Kombination aus Auflösung 0,001 mm, IP67-Schutz und gut ablesbarer Digitalanzeige 9 mm sorgt für zuverlässige Messergebnisse im Labor und in der Werkstatt; bestellen Sie den digitalen Messschieber direkt über Metav Werkzeuge oder fragen Sie unsere Beratung bei Bedarf an. Messschieber von Microtech Metrology Der Messschieber ist ein digitaler Präzisionsschieber für Feinmechanik, Labor und Werkstatt, der kleine Bauteile mit hoher Auflösung schnell und sicher erfasst. Digitaler Messschieber von Microtech Metrology Messbereich 5–50 mm, ideal für Mikroaufgaben Auflösung 0,001 mm für feine Toleranzen IP67: Schutz gegen Staub und zeitweiliges Untertauchen Gut ablesbare Digitalanzeige, Ziffernhöhe 9 mm Präzision, die Messaufgaben vereinfacht Die hohe Auflösung 0,001 mm ermöglicht Messungen im Mikrometerbereich und reduziert die Messunsicherheit bei anspruchsvollen Prüfaufgaben. Für Anwender im Feinmechanik‑Bereich bedeutet das, dass enge Toleranzen sicher geprüft und dokumentiert werden können. Die präzise Ablesbarkeit spart Zeit bei wiederholten Kontrollen und verbessert die Prozessstabilität in der Fertigung. Robustheit und sichere Nutzung unter rauen Bedingungen Mit der Schutzart IP67 ist das Gerät gegen eindringenden Staub und zeitweiliges Untertauchen geschützt, was die Einsatzmöglichkeiten in schwierigen Werkstattumgebungen erweitert. Die Digitalanzeige mit 9 mm Ziffernhöhe sorgt für schnelle Ablesbarkeit, auch bei schwächerer Beleuchtung. Dieser Kombination aus Schutz und Ergonomie reduziert Fehlerquellen bei der täglichen Nutzung. Klassifikation: Mikro‑Messschieber für feine Bauteile Aufgrund des maximalen Messbereichs von 50 mm gehört das Gerät zur Mikro‑Klasse und ist damit speziell für feinmechanische Arbeiten, Uhrmacheraufgaben und Laborprüfungen geeignet. Die kompakte Bauform bietet ein gutes Verhältnis aus Reichweite und Führbarkeit, sodass Messungen mit einer Hand möglich bleiben und wiederholbare Resultate erzielt werden. Einsatzvorteile für Anwender und Qualitätsprüfungen Die digitale Anzeige und die feine Auflösung machen das Werkzeug zur sinnvollen Ergänzung in Qualitätskontrollen und Prototypenprüfungen. Die einfache Handhabung reduziert Schulungsaufwand, während die Verlässlichkeit der Messwerte die Entscheidungssicherheit bei Fertigungsfreigaben erhöht. Kleine Bauteile lassen sich präzise erfassen, dokumentieren und in Prüfprotokolle übernehmen. Empfehlung: Für präzise Mikro‑Messungen die klare Wahl ist der digitale Messschieber von Microtech Metrology – bei Fragen oder technischer Beratung kontaktieren Sie Metav Werkzeuge per eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930, alternativ WhatsApp +49 170 2837271 Produktmerkmale Artikelnummer: 142025006 GTIN: 4061905455599 Marke: Microtech Metrology Bezeichnung: Messschieber Daten Ablesung: 0,001 mm Messbereich: 5–50 mm Besonderheiten IP Schutz: IP 67 Digitalanzeige: Digital, Höhe 9 mm Digital: true eClass: 21170344 FAQ Wie fein lässt sich mit diesem Messschieber messen? Der digitale Messschieber von Microtech Metrology erreicht eine Ablesung von 0,001 mm, sodass Mikrometer‑genaue Prüfungen möglich sind und enge Toleranzen sicher kontrolliert werden können. Für welche Anwendungen eignet sich der Messschieber mit 5–50 mm Messbereich am besten? Der Messbereich von 5–50 mm macht den Schieber ideal für Feinmechanik, Uhrmacherarbeiten und Laboranwendungen, bei denen kleine Bauteile und enge Passungen geprüft werden müssen. Ist das Gerät gegen Staub und Feuchtigkeit geschützt? Ja, der Messschieber verfügt über die Schutzart IP67, wodurch er gegen Staub und zeitweiliges Untertauchen geschützt ist und sich gut für den Werkstatteinsatz eignet. Hersteller: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
520mm Digital Caliper With Swiss Digit Display, IP67, Includes Ø20/Ø35mm Measuring Cones, ISO 17025 Calibrated - Microtech Metrology
Take advantage of a robust, large-range measuring solution that combines ISO 17025 traceability, IP67 ingress protection and a wide measuring span for reliable shop-floor control; order the calibrated instrument directly via Metav Werkzeuge or consult our specialists for integration advice. Digital Precision Caliper by Microtech Metrology — IP67, ISO 17025 calibrated Digital Precision Caliper for versatile workshop and fixture measurements, designed for robust use on large components with a measuring span up to 520 mm ISO 17025 calibrated and certified Robust IP67 dust and water protection Measuring range up to 520 mm Swiss Digit 11 mm high-contrast display Traceable accuracy for quality assurance The caliper is delivered fully ISO 17025 calibrated with an accompanying certificate, providing documented traceability for quality systems and audits. With a stated accuracy of ±0.03 mm and a digital resolution of 0.01 mm, the unit supports precise acceptance checks and in-process controls where documented measurement uncertainty matters. This level of verification reduces rework and supports consistent production decisions in regulated or serial manufacturing environments. Built to withstand industrial conditions Constructed for everyday shop use, the instrument carries an IP67 rating for dust-tight protection and temporary immersion resistance, which helps maintain reliability in coolant-prone or dusty workstations. The measuring span reaches 520 mm, placing the caliper in the large-range category suitable for sizeable fixtures, housings and assembly jigs where a long, rigid beam is required for reproducible readings across a component’s length. Readability and practical accessories for efficient workflows A high-contrast Swiss Digit readout with 11 mm digits ensures quick value capture at the bench or on the shop floor, speeding up measurement routines and reducing transcription errors. The package includes two measuring anvils (Ø20 mm and Ø35 mm), allowing immediate adaptation to bore and spacing measurements without auxiliary fixturing. Digital operation simplifies logging and limits manual interpretation, improving throughput in routine inspection tasks. Operational benefits and supplier confidence Sourcing this caliper through Metav Werkzeuge ties the instrument to a clear supply chain: stock held and quality filtered in Emmerich supports fast replenishment and consistent standards across orders. The product from Microtech Metrology combines practical robustness with metrological transparency, making it appropriate for maintenance shops, toolrooms and quality departments that require both durability and certified measurement performance. Contact Metav Werkzeuge today to discuss how the Microtech Metrology digital precision caliper (SKU 141730513) can be integrated into existing inspection procedures and to secure an ISO 17025‑calibrated instrument from Emmerich. Technical data Article number: 141730513 GTIN: 4061905452529 Manufacturer: Microtech Metrology Facts Measuring range: 20–520 mm Resolution: 0.01 mm Accuracy: ±0.03 mm Display: Swiss Digit, 11 mm Protection class: IP 67 Special features Delivered ISO 17025 calibrated, certificate included Included measuring anvils: Ø20 mm and Ø35 mm Digital readout SKU: 141730513 FAQ What level of calibration is supplied with the caliper? The instrument is supplied fully calibrated to ISO 17025 standards; the Microtech Metrology digital precision caliper (SKU 141730513) is delivered with the official calibration certificate. Is the caliper suitable for wet or coolant-rich environments? Yes — the caliper has an IP67 rating, which provides dust-tight protection and resistance to temporary immersion, making it suitable for coolant-exposed benches. What is the usable measuring range and for which components is it intended? The measuring span covers 20–520 mm, which places the tool in the large-range class for measuring sizeable fixtures, housings and long components where extended reach is required. Which display and resolution does the instrument offer? The unit features a Swiss Digit display with 11 mm high digits and a digital resolution of 0.01 mm, supporting clear readings and fine incremental measurement. Are additional measuring tips included for bore or spacing checks? Yes — the delivery contains measuring anvils with diameters Ø20 mm and Ø35 mm for immediate use on bore and pitch measurements with the Microtech Metrology caliper. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
520mm Digital Precision Caliper With Bore Probe Ø20/Ø35mm, Color 2.4" Display, IP54, ISO 17025 - Microtech Metrology
Take advantage of ISO 17025 traceability, wireless data transfer and a 20–520 mm measuring range for reliable, workshop-ready measurements; order the Microtech Metrology precision digital caliper directly via Metav Werkzeuge or ask our consultants if needed. Microtech Metrology Precision Digital Caliper — Wireless data output & 2.4" colour display The Microtech Metrology precision digital caliper is a large-range, workshop and inspection instrument designed for repeatable dimensional checks and process data capture across mechanical and production environments. ISO 17025 calibrated with certificate Wireless + USB data output 2.4" colour digital display IP54 splash-protected design Measuring range 20–520 mm Traceable accuracy for quality control The instrument arrives ISO 17025 calibrated and supplied with a calibration certificate, ensuring measurement results are auditable and acceptable in formal quality workflows. With a stated accuracy of ±0.03 mm and a display resolution of 0.01 mm, this digital caliper meets standard workshop tolerances while providing the documentation required for traceable inspection. The delivered calibration removes uncertainty about initial conformity and supports first-off inspection and incoming goods verification. Data transfer and handling tailored to production Equipped with Wireless and USB data outputs and a 2.4" colour display, the caliper integrates into digitalised measurement routines without interrupting operator flow. Wireless transfer simplifies logging to inspection software or coordinate-measuring systems, while USB provides a direct connection for secure data export. The IP54 rating protects the electronics from dust and water spray, preserving uptime on the shop floor and reducing the risk of measurement interruptions during routine production use. Wide range, robust probes and operator control Covering 20–520 mm, this caliper sits in the large-range category suitable for medium to sizable components where stiffness over length matters. Included measuring probes Ø20 mm and Ø35 mm expand application flexibility for hole and bore distance checks. The adjustable measuring force range of 1–20 N allows adaptation to delicate parts or heavier fixtures, reducing measurement bias from operator pressure. The result is a versatile instrument that balances reach, repeatability and ergonomic handling for assembly, toolmaking and maintenance tasks. For traceable, production-ready measurement with Microtech Metrology, contact Metav Werkzeuge in Emmerich for tailored advice and procurement: info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 141730517 GTIN: 4061905452338 Manufacturer: Microtech Metrology Facts Measuring range: 20–520 mm Resolution (display): 0.01 mm Accuracy: ±0.03 mm Measuring force: 1–20 N Protection class: IP54 Special features ISO 17025 calibration with certificate Data output: Wireless + USB Display: 2.4" colour digital display Included measuring probes: Ø20 mm, Ø35 mm Digital caliper for workshop and inspection use FAQ Is this caliper delivered calibrated and with documentation? Yes. The Microtech Metrology precision digital caliper is delivered fully calibrated with an ISO 17025 calibration certificate. Which data interfaces are available for integration? The instrument provides Wireless and USB outputs for direct logging to inspection software or data-collection systems. What measuring range and accuracy can be expected? The caliper covers 20–520 mm with a display resolution of 0.01 mm and an accuracy of ±0.03 mm. Is the device suitable for use in industrial shop-floor conditions? With an IP54 rating and ruggedised electronics, the caliper is designed for typical production and workshop environments. Are measuring probes included for bore or hole measurements? Yes. The delivery includes measuring probes Ø20 mm and Ø35 mm for bore-distance applications. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
530mm Digital Einbaumessschieber waagerecht, 0,01mm, DIN 862 - Metav IndustryLine
Die exzellenten Bewertungen von Metav Werkzeuge stehen für 42.000 glückliche Kunden. Mache Deine eigenen Erfahrungen und shoppe bei metav-shop.de.! HIGHLIGHTS waagerecht Messbereich: bis 400mm Ablesung: 0,01mm Material: Messschiene aus Aluminium (30x7,9mm) Ausführung: digital Datenausgang: RB 5 Groß gedacht, sauber gemessen Mit bis 400mm Reichweite gelingen Messungen auch dort, wo Bauteile breiter, länger oder bereits montiert sind. So lassen sich Rahmen, Führungen und Platten bequem über ganze Längen vergleichen, ohne die Position zu verändern. Das sorgt für gleichmäßige Ergebnisse und ein verlässliches Gefühl für Maßhaltigkeit – besonders nützlich bei Formeinsätzen, Spannvorrichtungen und Gehäusen. Die zusätzliche Spannweite schafft Sicherheit an Kanten, Falzen und über Bohrbilder hinweg und unterstützt einen zügigen, störungsfreien Ablauf in Werkstatt und Montage. Wir haben uns Gedanken gemacht, wie wir die einzelnen Messbereiche der Messschieber Klassifizieren können. Klassifizierung Messbereiche beim Messschieber. Verlässliche Präzision durch Fertigung nach DIN 862 Unser Einbaumessschieber basiert vollständig auf den Richtlinien der DIN 862. Dies betrifft sämtliche Produktionsschritte und Kalibrierverfahren ebenso wie die eingesetzten Materialien. Die so gewährleistete Maßhaltigkeit und Wiederholgenauigkeit sorgt für einheitliche Qualitätsstandards und internationale Vergleichbarkeit – ein entscheidender Vorteil bei Audits und Kundenfreigaben. Die Messwerkzeuge von Metav IndustryLine werden von unseren Experten für Messwerkzeuge empfohlen. Metav IndustryLine steht für Premium Messwerkzeuge zu einem unschlagbaren Preis. Alle Messwerkzeuge werden nach der Produktion gestestet. Technische Daten: Marke: Metav IndustryLine Bezeichnung: Einbaumessschieber Bestellnummer: M218.357 Zahlen / Daten: Messbereich: 0-400mm Gewicht: 0,4kg Norm: DIN 862 Ablesung: 0,01mm Datenausgang: RB 5 Ablesung in Inch/Zoll: 0,0005 Genauigkeit: 0,04mm Länge: 530mm Ausführungen Ausführung: digital Material: Messschiene aus Aluminium (30x7,9mm) Anzeige: mit EIN/AUS-, mm/inch- und NULL-Taste Messsystem: kapazitiv waagerecht Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com
53x82x31 mm Modbus RTU Data Box IP40, RS‑485 Microtech Metrology
Compact industrial gateway converts USB‑C metrology outputs to Modbus RTU over RS‑485, with configurable serial settings and an IP40 enclosure — ideal for integrating laboratory-grade measuring instruments into process control. Benefit from reliable protocol compatibility and a small footprint; order the module directly via Metav Werkzeuge or consult the Metav specialists for integration advice. Modbus RTU Data Box (Microtech Metrology) — RS‑485 gateway for DataMet instruments The Modbus RTU Data Box links Microtech DataMet instruments to industrial controllers and SCADA environments, providing a robust serial bridge for continuous data transfer and machine‑level integration. Modbus RTU protocol for industrial integration RS‑485 4‑wire interface (A, B, GND, 5–24 V) Compact IP40 enclosure, 53 × 82 × 31 mm Seamless system integration for process control This Modbus RTU interface simplifies the transfer of measurement values from laboratory instruments into automation systems, enabling direct connection to PLCs and data loggers via RS‑485. With a hardwareised serial bridge designed for deterministic communication, commissioning time is reduced: the default 9600 bps setting offers immediate compatibility with many legacy systems while the configurable baud rate ensures adaptation to faster networks. The result is a predictable, industrial‑grade data path that supports traceable processes and reduces manual transcription. Small footprint, industrial robustness Housed in a compact enclosure of 53 × 82 × 31 mm, the unit occupies minimal panel space while delivering the mechanical stability required for measurement setups. The IP40 rating and specified operating range keep the interface suitable for indoor workshop and laboratory environments where protection against coarse particles and controlled humidity is sufficient. The lightweight construction (approx. 0.15 kg) aids neat mounting and tidy cable routing without adding bulk to measurement stations. Clear serial parameters for dependable transfers Serial communications are framed to industry norms: default 9600 bps, 8 data bits, 1 stop bit and no parity, which together provide a standardised data format that simplifies protocol stacks on PLCs and SCADA systems. Clear, documented settings reduce ambiguity during integration and help maintain data integrity across longer RS‑485 bus runs. The four‑wire RS‑485 connection (power line plus A/B pair and ground) supports stable signalling for multi‑drop topologies. Built to fit metrology workflows Designed specifically for use with Microtech measurement equipment, the module accepts USB‑C input from DataMet instruments and converts that stream into a field‑ready Modbus RTU signal. The unit is supplied without a measuring tool and therefore complements existing instrument fleets rather than replacing them. Rated for operation between 5–40 °C and up to 70 % relative humidity, the interface is tailored to the ambient conditions typical of inspection benches and machine shops, helping to extend the utility of precision instruments into live production monitoring. Discuss integration and delivery options with Metav Werkzeuge — our specialists can advise on wiring, protocol mapping and compatibility for Microtech installations; eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 141077071 Label: Modbus RTU data box Type: Modbus RTU data box Manufacturer: Microtech Metrology Facts Dimensions: 53 × 82 × 31 mm Weight: 0.15 kg Working temperature: 5–40 °C Humidity: up to 70 % Water protection: IP40 Default baud rate: 9600 bps (configurable) Data bits: 8 Stop bits: 1 Parity: None Special features Protocol: Modbus RTU Interface: RS‑485, 4‑wire (5–24 V, GND, A, B) Connection to Microtech DataMet instruments via USB‑C Delivery without measuring tool Designed for integration into PLC/SCADA systems FAQ Is Modbus RTU the only supported protocol? The Modbus RTU data box from Microtech Metrology supports the Modbus RTU protocol for industrial integration; it is designed specifically to provide a Modbus RTU output from compatible DataMet instruments (SKU 141077071). Can the module be connected directly to a PLC RS‑485 port? Yes; the device provides a four‑wire RS‑485 interface (A, B, GND, and a 5–24 V supply line) for direct connection to PLC fieldbus ports or RS‑485 gateways using standard cabling. Is the unit suitable for outdoor use or wet environments? No; the enclosure is rated IP40, which protects against solid objects but is not intended for wet or outdoor locations. The product is intended for controlled indoor environments. Are the serial settings changeable on site? Yes; the default 9600 bps can be reconfigured where required, and standard framing parameters (8 data bits, 1 stop bit, no parity) are provided to ensure compatibility with most automation systems. Does the delivery include a measuring instrument or calibration certificate? The Modbus RTU data box is supplied without a measuring tool; it operates as an interface for Microtech DataMet instruments and does not include calibration documentation for measuring devices. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
53x82x31mm Modbus RTU Data Box With RS-485 Output, IP40 - Microtech Metrology
Integrate reliable Modbus RTU connectivity with compact IP40 protection and configurable serial settings for direct industrial connection; order this interface module directly via Metav Werkzeuge or request technical advice from our consultants. Modbus ASCII data box — Industrial Modbus RTU gateway with RS‑485 and USB‑C The Modbus ASCII data box offers a compact interface for connecting Microtech DataMet instruments to industrial networks, converting USB‑C output to a stable RS‑485 Modbus RTU link for data acquisition and process control. MODBUS RTU output via RS‑485 4‑wire USB‑C connection for Microtech DataMet instruments Configurable 9600 bps baud rate Compact IP40 enclosure 53×82×31 mm Seamless industrial data integration for measurement systems This compact industrial gateway translates instrument output into Modbus RTU, providing deterministic serial communication for PLCs, SCADA systems and data loggers. By offering an RS‑485 4‑wire interface it preserves signal integrity over long cable runs, while the USB‑C link keeps the connection simple for Microtech DataMet devices. The predictable transfer characteristics, including a default 9600 bps rate, reduce integration time and support automated logging and quality control routines, so measurement data can be consumed directly by production systems without custom converters. Reliable operation within standard workshop environments Engineered for everyday industrial conditions, the unit operates between 5–40 °C and up to 70% relative humidity, with an IP40 enclosure that protects against solid ingress in guarded installations. The small footprint ( 53×82×31 mm ) and low mass ( 0.15 kg ) ease panel or enclosure placement where space is at a premium. Supplied without a measuring instrument, the module is intended as a communications accessory to augment existing metrology hardware rather than a standalone gauge, simplifying inventory and allowing the integration of certified instruments already in use. Simple serial configuration and robust protocol support Configuration follows established serial conventions: 8 data bits, 1 stop bit, and no parity, with the baud rate configurable (default 9600 bps) to match existing field devices. The RS‑485 interface accepts the common 4‑wire wiring (5–24 V, GND, A, B), enabling straightforward connection to industrial masters. These well‑known settings minimise engineering adjustments and ensure reliable cyclic polling or event‑driven reporting, which helps maintain measurement traceability and reduces the risk of communication errors during production runs. Suited to metrology workflows and automated data collection As a purpose‑built interface for Microtech instruments, the module supports streamlined data capture and archival in quality systems and MES layers. Its compact design and standardised protocol support lower cabling complexity and make it easier to centralise readings from distributed gauges. For facilities seeking to digitise routine inspection and monitoring tasks, the device provides a practical, low‑effort route to feed laboratory‑grade measurements into control and reporting stacks, improving process transparency and decision reliability. For tailored advice on integrating Microtech instruments via this Modbus gateway, contact Metav Werkzeuge for compatibility checks and ordering from our Emmerich stock; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 141077072 Type: Modbus ASCII data box Protocol: Modbus RTU Device compatibility: Microtech DataMet instruments (USB‑C) Delivery: without measuring instrument Numeric data Working temperature: 5–40 °C Humidity: 70% IP rating: IP40 Baud rate: 9600 bps (configurable) Data bits: 8 Stop bits: 1 Dimensions: 53×82×31 mm Weight: 0.15 kg Features & connections RS‑485 4‑wire connection (5–24 V, GND, A, B) USB‑C interface for instrument connection Modbus RTU protocol support Compact enclosure for panel or enclosure integration FAQ Is this data box compatible with Microtech DataMet instruments? Yes. The Modbus ASCII data box is designed to interface with Microtech DataMet instruments via USB‑C and to present their output as Modbus RTU over RS‑485 (SKU 141077072). What are the operating limits for temperature and humidity? The module is specified to operate between 5–40 °C and up to 70% relative humidity, with IP40 protection for typical workshop and industrial environments. Can the communication speed be adapted to existing systems? The device uses a configurable baud rate with a default of 9600 bps; serial settings include 8 data bits, 1 stop bit and no parity to match common industrial masters. What wiring is required for the RS‑485 connection? Wiring follows a 4‑wire RS‑485 scheme (power range 5–24 V, GND, A, B) to ensure robust differential signalling for industrial distances. Is a measuring instrument included with delivery? No. Delivery is without a measuring instrument; the data box is an interface accessory intended to connect with existing Microtech measurement devices. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
542mm Digitaler Messschieber, 0,01mm Auflösung, IP 67, drahtlos, ISO 17025 kalibriert - Microtech Metrology
Der Messschieber überzeugt durch die Kombination aus präziser Ablesbarkeit, robuster Schutzart und rückverfolgbarer Kalibrierung; die 0,01 mm Ablesung und die ISO 17025 Kalibrierung sorgen für verlässliche Messdaten, die direkt in Prüfprozesse übernommen werden können. Bestellen Sie den Artikel bequem über Metav Werkzeuge oder fragen Sie unsere technische Beratung bei Bedarf an. Messschieber von Microtech Metrology — Digitaler Messschieber 45–542 mm Der Messschieber ist ein digitaler Messschieber mit Wireless‑Datenausgang und IP‑67 Schutz für großformatige Messaufgaben. Bis 542 mm Messbereich für große Bauteile Auflösung 0,01 mm für genaue Ablesung Wireless Datenausgang zur Prozessintegration IP 67 Schutz gegen Staub und Wasser ISO 17025 Kalibrierzeugnis inklusive Präzise Reichweite für großformatige Bauteile und stabile Handhabung Der Schiebelade bietet einen Messbereich von 45–542 mm, wodurch er in die Kategorie Mit Gross fällt und sich besonders für großformatige Komponenten wie Gehäuse, Spannmittel oder Rohrverbindungen eignet. Die Kombination aus 0,01 mm Ablesung und einer angegebenen Genauigkeit von 0,05 mm ermöglicht eine effiziente Prüfung großer Bauteile, weil weniger Nachmessungen erforderlich sind und Messvorgänge schneller dokumentiert werden können. Anwender profitieren von einer guten Balance aus Reichweite und Steifigkeit, die reproduzierbare Ergebnisse über die gesamte Messlänge unterstützt. Robustheit und Rückverfolgbarkeit für den Fertigungsalltag Die Schutzart IP 67 sichert den Einsatz auch in rauen Werkstattumgebungen, indem sie das Gerät gegen Staub und zeitweiliges Untertauchen schützt. Besonders wichtig für qualitätsorientierte Prozesse ist die ISO 17025 Kalibrierung: Das Werkzeug wird mit laufender Kalibrierung ausgeliefert und enthält ein Kalibrierzeugnis, das die Nachvollziehbarkeit der Messergebnisse gegenüber Prüfstellen und Kunden gewährleistet. Dadurch lassen sich interne Prüfprozesse effizienter gestalten und Auditanforderungen leichter erfüllen. Schnittstellen und Ablesekomfort zur Reduzierung von Fehlerquellen Die Digitalanzeige Big Screen Swiss Electronics sorgt für schnelle und sichere Ablesungen, während der Wireless Datenausgang die direkte Übertragung von Messwerten in Prüfsoftware oder Datenlogger erlaubt. Diese Verbindung reduziert Übertragungsfehler und beschleunigt Dokumentationsprozesse, weil manuelle Notizen entfallen. Für Prüflinge im Maschinenbau und in der Qualitätssicherung bedeutet das: weniger Medienbrüche und eine sauberere Datenkette von der Messung bis zur Produktionsfreigabe. Zielgruppenfokus und Einsatzszenarien in Werkstatt und Produktion Dieses Messmittel richtet sich an Fertigungsbetriebe, Prüfstellen und Werkstätten, die große Bauteile messen und gleichzeitig hohe Anforderungen an Prozesssicherheit und Dokumentation stellen. Der digitale Schieber eignet sich für Serienprüfungen genauso wie für stichprobenartige Kontrolle großer Komponenten. Durch die robuste Auslegung und die Messbereichsgröße bietet sich das Gerät als universelles Messmittel an, das Standardmessaufgaben ebenso zuverlässig abdeckt wie spezielle Prüfaufgaben in der Vorrichtungs‑ und Formenbauumgebung. Empfehlung: Für rückverfolgbare Präzision und unkomplizierte Prozessintegration den Microtech Metrology Messschieber mit ISO‑17025‑Kalibrierung über Metav Werkzeuge beziehen; technische Fragen gern per E‑Mail an info@metav-werkzeuge.com oder telefonisch unter +49 2822 7131930 klären. Produktmerkmale Artikelnummer: 141305144 Marke: Microtech Metrology Bezeichnung: Messschieber GTIN: 4061905452628 Fakten Messbereich: 45–542 mm Ablesung: 0,01 mm Genauigkeit: 0,05 mm IP Schutz: IP 67 Besonderheiten Datenausgang: Wireless Digitale Anzeige: Big Screen Swiss Electronics ISO 17025 Kalibrierung: Kalibrierzeugnis wird mitgeliefert FAQ Wie groß ist der Messbereich dieses Messgeräts? Der Messbereich liegt bei 45–542 mm, somit eignet sich der Microtech Metrology Messschieber besonders für großformatige Bauteile im Bereich Formenbau und Rohrbearbeitung. Welche Ablesegenauigkeit bietet die Digitalanzeige? Die Anzeige bietet eine Auflösung von 0,01 mm, was eine feine Ablesung ermöglicht und zusammen mit der angegebenen Genauigkeit von 0,05 mm reproduzierbare Messergebnisse gewährleistet. Ist eine Kalibrierung im Lieferumfang enthalten? Ja, der Messschieber wird mit einer nach ISO 17025 durchgeführten Kalibrierung ausgeliefert; ein entsprechendes Kalibrierzeugnis liegt bei. Wie kann man Messergebnisse vom Gerät übertragen? Der Schieber verfügt über einen Wireless Datenausgang, der die Übertragung direkt in Prüfsoftware oder Datenerfassungssysteme ermöglicht und damit Medienbrüche reduziert. Eignet sich das Gerät für den Einsatz in rauer Umgebung? Durch die Schutzart IP 67 ist das Messgerät gegen Staub und zeitweiliges Untertauchen geschützt, wodurch es für anspruchsvolle Werkstattbedingungen geeignet ist. Hersteller: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine; tool@microtech.tools
542mm Digitaler Messschieber, 0,01mm Auflösung, IP 67, kalibriert nach ISO 17025 - Microtech Metrology
Kombination aus hoher Präzision, robuster Schutzklasse und vollumfänglicher Kalibrierung sorgt für verlässliche Messprozesse. Mit ISO 17025 Kalibrierschein und einer Ablesung von 0,01 mm eignet sich das Werkzeug für Qualitätskontrolle und Fertigungsprüfung. Bestellung und technische Beratung direkt über Metav Werkzeuge möglich. Messschieber 141305143 von Microtech Metrology – Digitaler Messschieber Messschieber 141305143 ideal für präzise Außen-, Innen- und Stufenmessungen in der Fertigung und Werkstatt Digitaler Messschieber mit großem Display ISO 17025 Kalibrierung inklusive Zertifikat IP 67 Schutzklasse für nasse und staubige Umgebungen Messbereich bis 542 mm für größere Bauteile Ablesung 0,01 mm für feine Messungen Präzision und Kalibrierung für messbare Qualität Der Messschieber bietet eine Auflösung von 0,01 mm und eine Genauigkeit von 0,05 mm, was ihn für Standard‑Qualitätskontrollen im Maschinenbau prädestiniert. Die mitgelieferte ISO 17025 Kalibrierung sorgt dafür, dass Messergebnisse dokumentiert und rückverfolgbar sind, was Prüfprozesse vereinfacht und Auditanforderungen erfüllt. Dadurch entstehen eindeutige Vergleichsgrößen für Prüfpläne und Serienkontrolle. Schutz und Lesbarkeit für den Werkstattalltag Dank der IP 67 Schutzklasse ist das Gerät gegen Staub und zeitweiliges Untertauchen geschützt, was den Einsatz unmittelbar an Fertigungsstraßen und in feuchten Umgebungen erlaubt. Die Big Screen Swiss Electronics Anzeige erleichtert das Ablesen auch bei schlechten Lichtverhältnissen, wodurch Messvorgänge schneller und weniger fehleranfällig werden. Die kompakte Bauform unterstützt den schnellen, wiederholbaren Einsatz. Reichweite für größere Bauteile: Mit Gross Klasse Mit einem Messbereich bis 542 mm fällt der Schieber in die Kategorie Mit Gross, die für größere Spannmittel, Aufnahmen und Gehäuse konzipiert ist. Diese Längenklasse bietet ein gutes Verhältnis aus Reichweite und Profilsteifigkeit, sodass Messungen über die gesamte Länge reproduzierbar bleiben. Anwender profitieren von erhöhter Flexibilität bei der Prüfteileauswahl ohne Einbußen bei der Führung. Bedienkomfort und Einsatzempfehlung Die handliche Bedienung kombiniert digitale Präzision mit robustem Aufbau; die Schnabellänge von 150xØ1 unterstützt stabile Auflage bei Innen‑ und Außenmessungen. Das Gerät ist damit für Werkstatt, Vorrichtungsbau und Fertigungslinien geeignet, die zuverlässige Messwerte für Montagefreigaben oder Wareneingangsprüfung benötigen. Die dokumentierte Kalibrierung vereinfacht die Integration in bestehende Qualitätsprozesse. Microtech Messschieber mit ISO 17025 Kalibrierschein direkt bei Metav Werkzeuge für präzise Produktionskontrolle anfragen: info@metav-werkzeuge.com, Telefon +49 2822 7131930 Produktmerkmale Artikelnummer: 141305143 GTIN: 4061905452536 Marke: Microtech Metrology Bezeichnung: Messschieber Digital Anzeige: Big Screen Swiss Electronics Daten Genauigkeit: 0,05 mm Ablesung: 0,01 mm Messbereich Min: 45 mm Messbereich Max: 542 mm Messbereich: 45-542 Besonderheiten IP Schutz: IP 67 — Staub‑ und Wasserdicht ISO 17025 Kalibrierung: Kalibrierzeugnis wird mitgeliefert Digitale Funktion: Digitale Messung vorhanden Schnabellänge: 150xØ1 eClass: 21170344 FAQ Ist der Messschieber kalibriert und wird eine Bescheinigung geliefert? Ja, der Messschieber 141305143 von Microtech Metrology wird vollständig kalibriert ausgeliefert; das ISO 17025 Kalibrierzeugnis liegt bei und ermöglicht die sofortige Einbindung in Prüfverfahren. Für welche Einsatzbereiche eignet sich das Gerät mit 542 mm Messbereich? Der Messschieber 141305143 ist für den Maschinen‑ und Formenbau sowie Vorrichtungsbau geeignet, wenn Bauteile bis in den Bereich von 542 mm vermessen werden müssen; die Kategorie Mit Gross bietet hierfür die passende Reichweite und Stabilität. Wie genau liest das Display und wie zuverlässig sind die Werte? Die Anzeige erlaubt eine Ablesung von 0,01 mm, die Genauigkeit des Geräts beträgt 0,05 mm, was den Anforderungen der Standard‑Qualitätskontrolle im Industrieeinsatz entspricht. Ist das Gerät für den Einsatz in feuchten Werkstätten geeignet? Ja, die IP 67 Schutzklasse macht den Messschieber 141305143 resistent gegen Staub und zeitweiliges Untertauchen, was den Einsatz an Fertigungsstationen mit Spritzwasser oder in feuchter Umgebung ermöglicht. Lässt sich das Gerät für Innen‑ und Außenmessungen gleichermaßen verwenden? Der Messschieber 141305143 ist als digitaler Allrounder konzipiert und eignet sich für Innen‑, Außen‑ und Stufenmessungen; die Schnabellänge von 150xØ1 unterstützt dabei stabile Messauflagen. Hersteller: Microtech, Nizhneyurkovska str., 45a; 04080 Kyiv; Ukraine; tool@microtech.tools
550mm Built-In Digital Caliper Color 2.4" Touchscreen Wireless USB ISO 17025 Calibrated, Includes HD Microscope 7" LED Display - Microtech Metrology
Taking advantage of ISO 17025 factory calibration, a 0–550 mm measuring range and 0.001 mm resolution, this built-in caliper delivers repeatable large-format measurements with industry-ready data connectivity; order the unit directly via Metav Werkzeuge or consult the technical team for integration support. Built-in caliper (Einbaumessschieber) – 0–550 mm, 0.001 mm resolution, Microtech Metrology The built-in caliper is a panel-mounted measuring system designed for large-range component checks and automated measurement cells in production environments. Built-in design for machine integration Measuring range 0–550 mm for large components Resolution 0.001 mm for high-precision checks Wireless + USB data output for automation Seamless integration and automated data flow The unit is engineered for direct installation into fixtures and production equipment, offering a true built-in form factor that reduces installation footprint and wiring complexity. The combination of wireless and USB data outputs enables straightforward connection to PLCs, inspection software and data-loggers, simplifying traceable measurement workflows. The 2.4" colour touchscreen provides local status and quick parameter review, while the compact interface supports automated reporting and reduces cycle times in quality-control stations. Large-range measurement with laboratory-grade resolution Classified for the "Mit Gross" measurement class, the caliper covers a 0–550 mm range suited to sizeable workpieces such as housings, fixtures and medium-sized shafts where profile stiffness and measurement reproducibility matter. The fine 0.001 mm reading resolution allows step-up from routine shop checks to high-precision dimensional control without replacing existing gauges. Delivery includes a full factory calibration performed to ISO 17025, and a calibration certificate is supplied with the instrument to support quality documentation and traceability. Robust construction and practical inspection accessories Constructed from aluminium for a favourable stiffness-to-weight ratio, the device balances rigidity with manageable handling during installation. The package contains an HD microscope with 7" LED display, enabling visual inspection and magnified alignment at the measuring site, which is particularly useful when positioning jaws or checking small features prior to measurement. The digital electronics, industrial data outputs and solid mechanical design combine to reduce rework and accelerate first-pass yield in production and workshop applications. Contact Metav Werkzeuge for tailored integration advice and secure a factory-calibrated Microtech Metrology built-in caliper (SKU 142505158) with ISO 17025 certificate and full wireless/USB data support from our Emmerich distribution centre Technical Data Article number: 142505158 GTIN: 4061905036897 Brand: Microtech Metrology Material: Aluminium Display: Colour 2.4" touchscreen Data output: Wireless + USB Calibration: Supplied calibrated to ISO 17025 with certificate Included accessory: HD microscope with 7" LED display Facts Measuring range: 0–550 mm Resolution / reading: 0.001 mm Digital: yes SKU: 142505158 Special features Built-in / panel-mounted design Factory calibration to ISO 17025 included Wireless connectivity for Industry 4.0 applications USB data interface for direct logging HD microscope with integrated display for visual inspection FAQ What measuring range does this caliper cover? The built-in caliper offers a measuring range of 0–550 mm, making it suitable for medium to large components and jigs; the unit is listed as SKU 142505158. Is a calibration certificate supplied with the instrument? Yes, the device is delivered fully calibrated to ISO 17025 standards and includes a calibration certificate to support quality management and traceability. How is measurement data exported from the caliper? Measurement data can be exported via the built-in wireless interface or through the USB port for direct connection to PCs, PLCs or data-collection systems. Does the package include any inspection accessories? The delivery contains an HD microscope with a 7" LED display, which assists with visual checks and alignment during setup and measurement. Can this caliper be integrated into an automated production cell? The built-in design, combined with wireless and USB data outputs, is intended for straightforward integration into automated inspection stations and production cells. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
55° Thread Measurement Adapter BSF 55° Thread Gauge Attachment - Microtech Metrology
Benefit from accurate BSF 55° thread profile inspection combined with effortless instrument integration and robust repeatability; the accessory supports consistent quality control and smooth production workflows. Order the unit directly via Metav Werkzeuge or contact our consultants for application advice. Measuring attachment — Thread measuring head, BSF 55° for precise thread inspection by Microtech Metrology Measuring attachment for targeted verification of Whitworth-type threads, offering a compact solution for workshop and inspection stations where reliable thread form assessment is required BSF 55° thread profile measurement Precision accessory for thread inspection Integrates with Microtech metrology instruments Robust build for repeatable readings Accurate profile verification to secure thread conformity The BSF 55° head is engineered for the controlled assessment of Whitworth-style threads, delivering a clear geometric reference for profile inspections. By reproducing the standard 55° flank angle, this accessory simplifies the comparison between a workpiece and the nominal form, reducing subjective interpretation during checks. The targeted design converts the measured geometry into a repeatable result, supporting traceable quality routines and minimising rework. Straightforward instrument integration for faster inspection cycles Designed as an accessory for precision measuring devices, the head mounts without complex adaptations and aligns with common metrology interfaces. Integration with established inspection setups shortens set-up time and increases throughput in the measuring process. The compact interface and uncluttered geometry enable fast switching between measuring tasks, which contributes to efficient shop‑floor workflows and a lower total inspection time per batch. Consistent measurements through stable construction and repeatability A robust construction maintains flank contact and alignment during measurement, which improves repeatability across multiple checks. The accessory's geometry emphasises stability to limit measurement scatter; this benefits quality assurance by producing comparable readings across shifts and operators. Durable materials and a design that resists deformation help to reduce the need for frequent recalibration, supporting longer intervals between service actions. Practical benefits for workshop and inspection environments Using a dedicated thread measurement head reduces interpretation errors and standardises inspection protocols, especially where Whitworth-derived profiles are common. The accessory is particularly useful for workshops and service centres that handle maintenance or small-series production of classic thread forms. Clear mechanical references and a simple mechanical interface make it a pragmatic tool for both bench inspection and integration into existing metrology fixtures. Contact Metav Werkzeuge today for a tailored recommendation on integrating this Microtech Metrology thread measuring head into existing inspection processes and to discuss compatibility with current instruments Technical data Article number: 141377212T GTIN: 4061905458682 Manufacturer: Microtech Metrology Facts Thread angle: 55° Pitch: 10 Special features For thread measurement BSF 55° Accessory for precision measuring instruments Category: Accessory (Zubehör) FAQ What thread form does this accessory check? The accessory checks Whitworth-derived profiles using the BSF 55° form; the head reproduces the standard 55° flank angle for reliable profile comparison. Which instruments is the head compatible with? The head is designed as a precision accessory and integrates with standard metrology interfaces; compatibility should be verified against the specific measuring instrument make and model before ordering. Is the accessory supplied calibrated? No specific calibration certificate is stated in the product data; calibration status should be confirmed if a traceable certificate is required for quality documentation. Can the head be used for production sampling? Yes. The accessory is intended for routine inspection and sampling workflows where repeatable, comparable measurements of BSF thread profiles are needed. What information identifies this product for reordering? Use SKU 141377212T and GTIN 4061905458682 when reordering or enquiring about the Microtech Metrology thread measuring head. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
55° Thread Measurement Adapter BSF For Thread Gauging - Microtech Metrology
Take advantage of the combination of 55° included angle, targeted BSF thread compatibility and compact accessory design to improve thread inspection reliability; order directly via Metav Werkzeuge or consult our specialists for integration advice. Measuring Attachment — 55° BSF thread profile, Microtech Metrology A Measuring Attachment designed to verify 55° BSF thread profiles in metrology setups and inspection routines. 55° included angle for BSF thread checks Accessory for measuring instruments Precision-ground profile for reliable checks SKU 141377213T · GTIN 4061905458699 Accurate verification of BSF thread profiles The accessory is engineered for precise assessment of BSF thread geometry by matching the classic 55° included angle, enabling straightforward profile comparisons against reference standards. When used alongside a suitable inspection instrument, the attachment converts geometric form into a reproducible contact condition, which supports faster pass/fail decisions and reduces rework. The clear specification of pitch 9 assists in recognising the intended thread spacing during evaluation and in documenting inspection results. Smooth integration into measurement setups for consistent results As a metrology accessory from Microtech Metrology, this attachment is intended for simple incorporation into existing gauge heads and inspection rigs that accept threaded or mounted probes. Its precision-ground profile provides repeatable contact conditions, which contributes to consistent readings when the primary measuring device is within its calibration window. The accessory format makes it suitable for batch checks and sample inspections on the shop floor or in the quality lab, improving throughput without complex retrofit work. Practical benefits for workshop and inspection use Compact and purpose-built, the attachment supports efficient threading checks where a dedicated thread gauge would be impractical. The design focuses on practical advantages: clear geometric conformity to the 55° Whitworth-type profile, compatibility as a supplementary measuring element in metrology workflows and straightforward identification via SKU: 141377213T and GTIN: 4061905458699. This combination helps standardise thread inspections across multiple machines and operators, increasing process reliability and traceability during production control. For consistent BSF thread inspections, choose the Microtech Metrology measuring attachment and contact Metav Werkzeuge for procurement and technical guidance via info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data SKU: 141377213T GTIN: 4061905458699 Manufacturer: Microtech Metrology Product: Measuring Attachment Facts Included angle: 55° Pitch: 9 Category: Measuring instruments > Accessory Special features For BSF thread profile checks Accessory for metrology instruments Assets: product images available FAQ What is the primary purpose of this measuring attachment? The measuring attachment is used to verify the 55° profile of BSF threads, allowing comparison of thread geometry against standards during inspection. Which thread standard is covered by this accessory? This accessory is matched to the BSF / Whitworth-type profile with a 55° included angle, making it suitable for fine Whitworth thread checks. Can the attachment be used without a measuring instrument? The attachment is an accessory intended for use with a compatible measuring instrument or gauge head; evaluation relies on the primary device to record and interpret contact results. How should the pitch value be interpreted? The listed pitch 9 refers to the thread spacing characteristic assigned to this item; it assists in identifying the correct thread form during inspection planning. How is the product identified for ordering and documentation? Identification is via SKU 141377213T and GTIN 4061905458699, which should be quoted in purchasing and quality documentation. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
55° Thread Measurement Adapter BSW 55° Angle - Microtech Metrology
Benefit from precise BSW 55° profiling and a defined pitch 4 mm for consistent thread inspection; the compact accessory delivers repeatable results for metrology benches and inspection rigs. Order the Measuring Attachment directly via Metav Werkzeuge or ask our consultants if needed. Measuring Attachment (BSW 55°) — Thread measurement accessory, Microtech Metrology The Measuring Attachment (BSW 55°) is a precision accessory for thread profile inspection, designed for metrology use where the British Standard Whitworth 55° form and a pitch of 4 mm must be verified reliably. BSW 55° thread profile compatibility Pitch reference 4 mm for consistent checks Compact metrology accessory for inspection benches Microtech Metrology manufactured quality Reliable measurement of Whitworth thread form The attachment is engineered to reference the BSW 55° profile directly, so thread angles are measured against a standard geometry rather than inferred from related dimensions. This approach reduces interpretation error and makes the accessory suitable for repeatable inspections where the 55° flank angle is critical. The primary benefit is clear: faster pass/fail assessments of Whitworth-threaded components while maintaining traceability to a defined profile. Clear pitch reference for efficient inspection routines With a specified pitch 4 mm, the unit provides an immediate physical reference for thread pitch checks, simplifying routine control procedures in production or quality assurance. Integrating this accessory into a measuring setup shortens setup time and lowers the risk of incorrect pitch interpretation, which contributes to a smoother workflow and fewer rework cycles. The measurable pitch value means inspection records can be correlated directly to the part specification. Compact format that supports standard metrology workflows Designed as an accessory for inspection equipment, the component’s compact footprint keeps the setup stable without requiring extensive fixture changes. The modest dimensions assist in retaining instrument rigidity during contact measurement and help maintain reproducible probe engagement. This results in reliable single-operator checks and consistent data capture across multiple parts or inspection rounds. Built for dependable use in workshop and laboratory environments Manufactured by Microtech Metrology, the accessory emphasises durability and dimensional fidelity. The construction focuses on maintaining the reference geometry under routine handling and integration, which supports long-term measurement stability. The moral appeal here is straightforward: a component made to professional standards that helps reduce uncertainty and supports quality assurance processes across small and larger-scale production settings. Contact Metav Werkzeuge for tailored advice on integrating the Microtech Metrology measuring attachment into existing inspection setups and to confirm delivery from Emmerich—email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 141377207T GTIN: 4061905458804 Name: Measuring Attachment Manufacturer: Microtech Metrology Category: Accessory (metrology instruments) Facts Angle: 55° Pitch: 4 mm Special features Designed for BSW 55° thread profile measurement Intended as an accessory for inspection and metrology benches Compact reference geometry for repeatable checks FAQ What thread profile does this attachment support? The Measuring Attachment supports the British Standard Whitworth profile with a 55° flank angle, providing a direct geometric reference for BSW inspections. How is pitch specified for this accessory? The unit carries a defined pitch 4 mm reference, enabling straightforward verification of thread pitch during inspection routines. Can the attachment be integrated into existing metrology setups? Integration is intended for common inspection benches and metrology instruments; the accessory from Microtech Metrology is compact and designed for straightforward adaptation into established workflows. Is this accessory suitable for production control and laboratory use? Yes. The Measuring Attachment is manufactured to meet the durability and dimensional fidelity expected in both workshop production control and laboratory inspection contexts. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
55° Thread Measurement Adapter BSW 55°, - Microtech Metrology
Take advantage of a purpose-built measuring accessory that ensures reliable inspection of Whitworth profiles through its 55° geometry and defined pitch 8 specification; the combination of repeatable profile matching, compact handling and simple integration supports consistent quality control workflows. Order directly via Metav Werkzeuge or consult the team for compatibility advice. Measuring attachment BSW 55° — Thread measuring accessory by Microtech Metrology A compact measuring attachment, Measuring attachment BSW 55°, designed for precision inspection of Whitworth (BSW) thread profiles and suitable for use in metrology setups and accessory stations. BSW 55° geometry for Whitworth threads Precision 55° thread angle Designed for precision measuring setups Precise thread profile verification for consistent results The attachment is engineered to reproduce the classic BSW 55° flank geometry, enabling clear profile verification in standardised inspections. By matching the nominal thread angle, the device simplifies comparative checks against reference gauges and drawing data, reducing interpretation errors during visual or optical inspection. The compact design supports easy mounting and stable positioning in accessory holders, which contributes to consistent repeatability in routine checks and small-batch quality control. Streamlined inspection workflow for thread production and maintenance Integration of this accessory into an inspection station reduces handling steps compared with manual profile templates. The defined pitch 8 specification clarifies the nominal thread spacing to be inspected and assists in selecting the correct comparator or measuring procedure, shortening setup time and lowering the chance of incorrect gauge selection. The attachment is therefore well suited to environments where efficiency and traceability matter, for example workshop testing, incoming goods inspection and on-machine verification tasks. Built for metrology compatibility and traceable documentation As an accessory classified for metrology use, the unit is supplied with clear identification data that supports traceability within inspection protocols. Compatibility with established accessory interfaces allows the measuring attachment to be combined with optical comparators and standardised inspection stands, delivering a pragmatic solution for laboratories and industrial workshops that require documented, verifiable checks of Whitworth thread forms. The straightforward feature set keeps calibration and routine checks manageable within existing quality systems. For precision Whitworth thread inspection and integration support, contact Metav Werkzeuge in Emmerich for technical advice and procurement assistance from the local Metav team Technical data Article number: 141377202T GTIN: 4061905458613 Manufacturer: Microtech Metrology Model name: Messaufsatz BSW 55° Measurements / Core data Thread angle: 55° Pitch: 8 Category: Accessory SKU: 141377202T Special features / Application Designed for Whitworth (BSW) thread profile inspection Compact accessory for metrology and inspection setups Intended for integration with measuring stations and comparators FAQ What thread standard is this attachment designed for? The measuring attachment is configured for the Whitworth profile (BSW) with a 55° flank angle, allowing direct profile comparison and inspection. Can the accessory be used for threads other than BSW? Measurements are optimised for the BSW 55° geometry; using the unit for other thread standards would require verification that the flank angle and pitch are compatible. Which pitch does the attachment correspond to? The device is specified for pitch 8, which should be matched to the component thread before inspection to ensure correct assessment. Is this part supplied by the manufacturer Microtech Metrology? Yes, the attachment is provided by Microtech Metrology and is listed under article number 141377202T for identification and traceability. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
Precision calipers for accurate, repeatable measurement
Calipers are the indispensable length-measuring tools for industry and workshop environments, enabling fast and exact external, internal, depth and step measurements. Our professional range of precision calipers, including vernier calipers, dial calipers and digital calipers, combines mechanical robustness with modern data handling to support consistent quality assurance.
How these calipers work and where they help most
Analogue vernier calipers deliver reliable, autarkic operation via the vernier scale and are best suited to heavy-duty workshop use where durability matters. Digital calipers provide a contrast-rich display, minimise reading errors and speed up inspection routines through functions such as zero setting and data output. At the high end, touchscreen calipers from Microtech feature an integrated microcomputer, colour touch display, built-in error-tolerance checks and wireless data transmission, making them suited for Industry 4.0 workflows. Workshop calipers with extended measuring ranges offer optional fine adjustment and rounded tips for interior measurements, while in-built calipers can be mounted directly to machines or test rigs to monitor travel. Specialty calipers cover tasks such as deep grooves, pipe wall thickness, brake disc inspection, three-point measurements and bespoke geometries.
Tangible benefits that improve production performance
- Faster throughput: digital calipers with data output reduce manual entry and accelerate quality checks.
- Higher repeatability: robust mechanical design and error-tolerance controls raise measurement consistency.
- Flexible integration: wireless data transmission and touchscreen operation simplify digitisation to existing systems.
- Reduced downtime: workshop and in-built variants with fine adjustment minimise rework and set-up time.
- Application coverage: specialty calipers adapt to complex geometries, from three-point checks to deep-niche measurements.
Microtech and metav — quality and supply you can rely on
For high-end, touchscreen-equipped instruments, Microtech represents the technological benchmark thanks to its integrated controls and wireless capabilities. As a precision partner, Metav complements this with decades of experience and a comprehensive offering: more than 250,000 products, a European quality filter in Emmerich and the trust of over 48,000 customers, making Metav a sensible central source for calipers and measuring equipment.
Quick summary
Calipers — from analogue vernier to touchscreen digital — deliver the measurement accuracy and data connectivity modern production demands while reducing inspection time and improving repeatability.
FAQ
What are the main differences between analogue and digital calipers?
Analogue vernier calipers rely on a vernier scale and are prized for ruggedness and independence from power, whereas digital calipers provide a contrast display, zero setting and data output to eliminate readout errors and speed up quality processes.
Can calipers be integrated into a digital inspection workflow?
Yes. Many digital calipers and touchscreen models support data output and wireless data transmission, enabling direct transfer of measurements into quality-management systems or statistical process control.
Which caliper type is best for large measuring ranges in a workshop?
Workshop calipers with extended measuring ranges and optional fine adjustment are designed for large components; they maintain mechanical stability and are available with rounded interior jaws for safer internal measurements.
Are there calipers for specialised geometries like deep grooves or brake discs?
Specialty calipers are explicitly engineered for such tasks. They feature tailored measuring faces for deep-niche measurements, pipe wall thicknesses, brake-disc checks and three-point or flexible geometries.
How do touchscreen calipers from Microtech improve quality control?
Microtech touchscreen calipers combine an integrated microcomputer, colour touch display and built-in error-tolerance checks with wireless data transmission, allowing immediate verification, reduced human error and seamless digitisation in line with Industry 4.0 practices.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com