Precision calipers for reliable industrial measurement
Precision calipers and their variants provide fast, repeatable outside, inside, depth and step measurements to ensure component conformity and process control on the shopfloor, combining mechanical robustness with digital data handling for traceable results. Designed for use in industrial quality assurance and manufacturing, these calipers serve applications from rough workshop environments to precision inspection, with options such as analogue vernier calipers for durable, battery‑free operation and digital calipers offering clear displays and data output to speed up quality workflows. Specialist formats, including workshop calipers with extended ranges and built‑in mounting calipers for machine or fixture monitoring, extend capability to long strokes and embedded measurement tasks, while bespoke models handle deep grooves, pipe wall thicknesses and three‑point or other complex geometries. The range emphasises highest accuracy and process integration, featuring high‑end touchscreen models with integrated microcomputers, wireless data transfer and Industry 4.0 compatibility to modernise measurement and quality data capture.
310mm Digital Precision Caliper for Bore Distance Measurement Swiss Digital Display, IP67, ISO 17025 Calibrated - Microtech Metrology
Take advantage of the combination of reliable ISO 17025 calibration, robust IP67 protection and wireless data output to speed up inspection workflows and reduce traceability effort; order the instrument via Metav Werkzeuge or consult our specialists for technical matching. Precision Caliper — Microtech Metrology (Digital, Wireless, IP67) A Precision Caliper designed for workshop and metrology tasks, offering a clear Swiss digital readout, wireless data transfer and rugged IP67 protection for demanding environments Swiss digital display, 11 mm height Wireless data output for seamless logging IP67 protection for dust and water resistance ISO 17025 calibrated with certificate High confidence through laboratory-grade calibration and repeatable readings This instrument arrives fully ISO 17025 certified and calibrated, supplying a traceable calibration certificate that documents measurement quality. The digital readout with a resolution of 0.01 mm supports consistent recording of dimensional data, which shortens inspection cycles and reduces rework. By combining laboratory-grade calibration with a clearly legible Swiss digital display, the caliper aids reliable decision-making on the shop floor and in quality-control stations alike. Built for tough environments and reliable data capture With an IP67 rating, the caliper withstands dust ingress and temporary immersion, making it suitable for production areas where contamination or coolant exposure is a risk. The wireless data output eliminates manual transcription and accelerates data collection into inspection software or measurement logs, reducing clerical errors and boosting throughput. Handcrafted measuring jaws ensure stable contact geometry, while the 10–310 mm measuring range classifies this tool as a medium-range caliper, ideal for components and assemblies that require more reach without sacrificing stiffness. Ergonomic handling, low maintenance and consistent results Self-lubricating slides and refined jaw geometry lower maintenance intervals and support consistent closure force for repeatable measurements. The instrument's combination of tactile quality and digital convenience enhances daily productivity in machine shops, fixture production and incoming goods inspection. The robust construction and precision finish deliver dependable long-term repeatability, so inspection routines remain fast and documented, supporting continuous process control. Contact Metav Werkzeuge for a technical consultation on integrating the Microtech Metrology Precision Caliper with existing inspection systems — phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data SKU: 141730304 GTIN: 4061905037023 Manufacturer: Microtech Metrology Facts Measuring range: 10–310 mm Resolution: 0.01 mm Display: Swiss digital, 11 mm height Protection class: IP67 Special features Wireless data output ISO 17025 calibration with certificate Handcrafted measuring jaws Self-lubricating slide Digital display (Swiss) FAQ Is the caliper delivered with a calibration certificate? Yes. The Precision Caliper from Microtech Metrology (SKU 141730304) is supplied fully calibrated to ISO 17025 and includes the corresponding calibration certificate. Can the wireless output be connected to inspection software? The caliper supports wireless data transfer; the Microtech Metrology device can be integrated into data-logging workflows to reduce manual entry and improve traceability. What environments is the instrument suitable for? With IP67 protection, the instrument tolerates dusty conditions and temporary immersion, making it suitable for many production and workshop settings where contamination or coolant exposure occurs. Which measurement tasks suit the 10–310 mm range? The 10–310 mm range places this caliper in the medium-range category, suitable for larger assemblies, fixture components and parts that require more reach while maintaining stiffness and ease of handling. How are the measuring jaws made and why does it matter? The measuring jaws are handcrafted to ensure consistent contact geometry; this increases repeatability and improves reliability for recurring dimensional checks. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
310mm Digital Precision Caliper For Bore-to-Bore Measurements, Swiss Digital 11mm Display, IP67, ISO 17025 Calibrated - Microtech Metrology
Take advantage of accurate, shop‑ready measurement with a calibrated, dust‑ and water‑resistant instrument that combines a 10–310 mm measuring range, 0.01 mm resolution and an ISO 17025 calibration certificate for immediate use in quality control. Order directly via Metav Werkzeuge or contact their consultants for technical guidance. Digital Precision Caliper 10–310 mm by Microtech Metrology (IP67, ISO 17025) A Digital Precision Caliper 10–310 mm designed for medium‑range workshop and inspection tasks, offering a robust IP67 housing and a factory calibration to ISO 17025 for traceable results. High‑resolution 0.01 mm display IP67 dust‑ and water‑resistant construction ISO 17025 calibrated with certificate Hand‑finished measuring jaws for repeatability Accurate reach for fixtures and medium assemblies The caliper covers a 10–310 mm measuring range, placing it in the medium measuring range class that balances reach with stiffness — ideal for vices, larger components and moulded parts where repeatable guidance is essential. With a display resolution of 0.01 mm, the instrument suits standard workshop quality control and component inspection; the fine digital step reduces reading uncertainty and supports efficient pass/fail decisions in production and incoming‑goods checks. Built to withstand the shopfloor A robust IP67 enclosure and self‑lubricating slide surfaces ensure reliable operation where coolant, dust or occasional splashes are present. The clear Swiss Digital readout, with 11 mm high digits, speeds up measurement cycles and minimises transcription errors, while hand‑finished jaws deliver consistent contact geometry for external and step measurements. These features reduce downtime and maintenance needs, improving throughput in daily metrology tasks. Traceable calibration for quality assurance Delivered fully calibrated to ISO 17025, the instrument includes a calibration certificate that documents traceability and measurement uncertainty. This certified status removes an initial verification step for internal quality systems and supports audits or supplier acceptance procedures. The included documentation helps integrate the caliper into formal inspection routines and reduces the administrative burden associated with new measuring equipment. Practical handling and workshop integration Ergonomic sizing and a medium‑length beam make the instrument easy to handle for single‑operator checks while retaining the stiffness required for reproducible readings. The combination of robust protection, precise readout and hand‑finished contact faces supports confident decision‑making across toolrooms, maintenance departments and quality labs. Metav’s distribution offers a practical supply channel and additional technical advice to align the tool with production workflows. Choose Microtech Metrology’s calibrated caliper for dependable medium‑range measurement and contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or +49 2822 7131930 for tailored ordering and technical consultation Technical data Article number: 141730303 GTIN: 4061905037016 Manufacturer: Microtech Metrology Digital display: Swiss Digital, digit height 11 mm Protection class: IP67 Calibration: ISO 17025 (certificate included) Facts Measuring range: 10–310 mm Display resolution: 0.01 mm Diameter of measuring cone: 10 mm Special features Hand‑finished measuring jaws Self‑lubricating slide Digital instrument suitable for workshop and inspection use Delivered calibrated with ISO 17025 certificate FAQ Is the caliper delivered ready for inspection use? Yes. The Digital Precision Caliper is supplied fully calibrated to ISO 17025 and includes the calibration certificate for immediate integration into inspection routines. What does IP67 protection mean for everyday use? IP67 indicates dust tightness and protection against temporary immersion; this caliper resists splash and coolant exposure common on the shopfloor without compromising the electronics. Can the instrument measure internal, external and step features? The instrument is equipped with hand‑finished jaws and appropriate probe geometry to perform external, internal and step measurements reliably for medium‑range components. What resolution and readability can be expected? The caliper provides a digital resolution of 0.01 mm and a Swiss Digital display with 11 mm high digits for clear, fast readings in busy environments. Which measuring tasks is the caliper best suited to? Designed for medium‑range tasks, the caliper is well matched to fixtures, moulded parts and assembly components where a combination of reach and stiffness is required; it supports routine quality control and workshop measurements. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
315x145x20mm Wooden Case With Foam Insert For Calipers Up To 300mm - Metav IndustryLine
Take advantage of robust protection and compact storage: the wooden case with a precision foam insert cushions measuring instruments and prevents movement during handling, while its compact 315 x 145 x 20 mm footprint saves bench and drawer space. Suitable for calipers up to 300 mm, it combines careful design with practical workshop use — order this case directly via Metav Werkzeuge or consult our team for application advice. Wooden case 315 x 145 x 20 mm for calipers — Wooden case with foam insert for calipers up to 300 mm (Metav IndustryLine) Wooden case 315 x 145 x 20 mm for calipers is a compact storage solution designed to protect precision measuring tools in workshops and metrology cabinets. Wooden case with foam insert Fits calipers up to 300 mm Compact dimensions 315 x 145 x 20 mm Protective storage for workshop and transport Reliable protection for precision tools The robust wooden case with a tailored foam insert offers secure seating for a precision measuring instrument and reduces the risk of shock and abrasion during transport or storage. The close-fit cavity keeps the gauge immobilised so that sliding surfaces and jaws remain clean and undamaged, preserving measurement performance. With an outer size of 315 x 145 x 20 mm, the case provides protection without occupying excessive bench space, allowing efficient organisation of a tool drawer or metrology shelf. This balance of compact design and cushioning safeguards instruments used in routine inspection and maintenance tasks. Practical storage that suits standard workshop calipers Designed to accommodate calipers up to 300 mm, the case matches the typical Standard range used in machine shops and metalworking: lengths such as 150, 200 and 300 mm are common because they combine reach with stiffness and single‑hand handling. The inner foam layout simplifies insertion and extraction and helps to prevent accidental contact with the measuring faces. For businesses that store several sets, the slim profile allows neat stacking or drawer storage, supporting orderly workflow and quick retrieval during inspection cycles. Durable materials and trusted supply chain Made from natural wood with a fitted foam lining, the product offers a robust, repairable casing that withstands workshop conditions while remaining lightweight. The choice of wood keeps handling comfortable and helps absorb minor impacts; the foam insert protects delicate surfaces and maintains instrument alignment. Supplied under the Metav IndustryLine, this accessory benefits from Metav’s focus on accessible precision and reliable European distribution: a quality filter and warehouse in Emmerich ensure consistent availability and predictable delivery. The combination of practical construction and a reputable supply channel reduces the risk of accidental damage and supports ongoing measurement reliability. Contact Metav Werkzeuge for availability and advice on matching cases to workshop requirements — Metav IndustryLine stock is dispatched from Emmerich for reliable supply to industry and trade. Technical Data Article number: M836.437 Dimensions: 315 x 145 x 20 mm Material: Wood with foam insert Suitable for calipers up to 300 mm Facts SKU: M836.437 Label: Holzetui 315x145x20mm für Messschieber Image: M836416-main.jpg Special features Foam lining for secure hold Compact design for bench storage Compatible with standard calipers (up to 300 mm) FAQ What size of caliper fits this case? This wooden case fits calipers up to 300 mm and is intended for the common standard lengths used in workshops. Is the foam insert removable or replaceable? The foam insert is fitted to hold the caliper securely; it can be replaced if necessary to renew the protective fit. Can the case be stored in a tool drawer or on a shelf? Yes, the compact 315 x 145 x 20 mm footprint is suitable for drawer storage, workbench organisation and metrology cabinets. Does the case protect the measuring faces from damage? The tailored foam seating prevents movement and contact that could damage measuring jaws, helping to preserve calibration and surface condition. Is the product part of a wider accessory range? The case is supplied under the Metav IndustryLine and complements standard metrology storage and transport solutions. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
33-300mm Digital Internal Groove Caliper With Preset, Stainless Hardened Body, Plastic Case - Metav IndustryLine
The combination of precise 0.01 mm readout, a 33–300 mm measuring span and robust stainless construction makes this instrument a dependable choice for workshop quality control; its RB 5 data output streamlines process documentation. Order the Digital internal-groove caliper M240.038.N directly via Metav Werkzeuge or ask our consultants if needed Digital internal-groove caliper M240.038.N — Metav IndustryLine, 33–300 mm, hardened stainless The Digital internal-groove caliper M240.038.N is a workshop-class digital caliper engineered for repeatable measurement of internal grooves and slots across a 33–300 mm span, combining easy readability with industrial robustness *Digital display with ON/OFF and zero/preset *33–300 mm range for standard workshop needs *Hardened stainless steel with metal housing *RB 5 data output for measurement integration Reliable measurement for everyday workshop tasks Classified in the Standard range, the instrument covers the most common workshop requirements with a 33–300 mm measuring span that balances reach and stiffness for routine machine‑shop inspections. The caliper provides a 0.01 mm display increment, the established resolution for digital workshop calipers and suitable for typical quality checks and production control. The relatively compact jaw length of 110 mm helps to access grooves while keeping the measuring faces stable, reducing user‑induced error and improving repeatability in serial tasks. Digital convenience and process integration The digital readout is equipped with ON/OFF and zero/preset functions to speed setup and reduce cycle times when comparing features or transferring reference points. The integrated RB 5 data output enables straightforward connection to inspection systems or data loggers, supporting traceable documentation and faster downstream analysis. Powered by a 3 V measuring system, the device is ready for immediate use and preserves readings during brief interruptions; the preset function further shortens the time-to-measure by eliminating manual recalculation or conversion. Durable construction for industrial environments Constructed from hardened stainless steel with a protective metal housing, the caliper resists corrosion and everyday workshop wear, ensuring long service life and consistent measurement geometry. The robust build also supports frequent handling and reduces the risk of deformation under regular use. Supplied to works standard, the instrument is aimed at machine shops, toolrooms and production lines where reliable, low-maintenance measuring tools contribute to predictable process control and less downtime. Contact Metav Werkzeuge today to specify the Metav IndustryLine M240.038.N for precise internal groove measurement and receive tailored advice from our specialists at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: M240.038.N GTIN: 4054469159942 Label: Digital-Innen-Nuten-Messschieber, 33-300 mm, 3 V mit Preset, INOX, Werksnorm Manufacturer: Metav IndustryLine Facts Measuring range: 33–300 mm Resolution (reading): 0.01 mm Weight: 1.05 kg Jaw length: 110 mm Tariff number: 90173000 Special features Material: hardened stainless steel, metal housing Display: digital with ON/OFF and zero/preset button Data output: RB 5 Measuring system: 3 V Supplied to works standard FAQ What types of measurements can this caliper perform? The caliper performs internal groove and slot measurements as its primary function; the design is optimised for internal features and tight recesses. Is the readout suitable for quality-control documentation? Yes. The device offers a 0.01 mm resolution and an RB 5 data output to support measurement logging and integration into quality workflows. Which materials is the caliper intended for use with? The caliper measures geometry, not material properties, and is suitable for measuring components across typical workshop materials where internal grooves need verification. How does the preset function benefit measurement routines? The zero/preset function reduces setup time by allowing quick reference setting and repeat checks without manual recalculation, improving throughput during serial inspections. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
35-300mm Internal Groove Caliper 0.05mm Reading Matt Chrome Inox, Supplied In Case - Metav IndustryLine
Robust measurement performance meets workshop practicality: the combination of a 35–300 mm measuring range, 0.05 mm vernier reading and a matt‑chrome stainless finish ensures reliable internal groove inspection and repeatable results. Order the internal groove caliper directly via Metav Werkzeuge or contact our consultants for tailored advice. Internal groove caliper M201.138 — Vernier 0.05 mm, 35–300 mm (Metav IndustryLine) The internal groove caliper M201.138 is a vernier measuring instrument designed for precise internal groove and slot measurement in general workshop and machine‑shop environments. Internal groove caliper 35–300 mm range Vernier reading 0.05 mm resolution Matt chrome finish on stainless steel Locking screw for repeatable positioning Supplied in protective case Precise internal measurements for standard workshop use This vernier instrument delivers a clear 0.05 mm reading via a classic vernier scale, making it suitable for routine control tasks where analogue robustness is preferred. Classified as a standard caliper (measuring range up to 300 mm), it balances reach and stiffness so that measurements of internal grooves, slots and narrow bores remain reproducible. The simple mechanical scale avoids battery dependencies while providing a dependable visual reference for production checks. Built to resist workshop wear and keep settings stable Constructed from stainless steel with a matt chrome surface, the instrument resists corrosion and abrasion in everyday shop conditions. A dedicated locking screw secures the sliding jaw at the measured position, supporting repeatable measurement cycles and easier transfer of values to inspection records. Delivery in a protective case simplifies storage and transport between workstations, keeping the caliper ready for frequent use without unnecessary downtime. Practical handling and measurement technique explained The vernier caliper uses its internal jaws to reach into grooves and narrow recesses; these jaws are shaped to engage groove bottoms and shoulder surfaces reliably. The analogue scale requires reading the vernier line against the main scale—an operation that, once familiar, provides fast and unambiguous results even for experienced operators. The mechanical design offers a tactile feel during measurement and a consistent feedback loop that supports quick quality decisions on the shop floor. A pragmatic choice for production and routine quality control Opting for this instrument supports efficient workflow: the combination of a widely used measuring range, clear resolution and durable finish reduces sources of rework and measurement interruption. For departments that prefer tried‑and‑tested analogue tools, the caliper provides a low‑complexity solution that integrates seamlessly into inspection routines and documentation practices, helping to maintain throughput without sacrificing measurement integrity. For procurement or technical clarification, contact Metav Werkzeuge GmbH in Emmerich — order the Metav IndustryLine internal groove caliper M201.138 or request application advice at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M201.138 GTIN: 4054469100692 ECLASS: 21170344 Tariff number: 90173000 Manufacturer: Metav IndustryLine Core specifications Measuring range: 35–300 mm Reading (vernier): 0.05 mm Accuracy: 0.15 mm Type: analogue vernier caliper Locking screw: yes Materials & features Material: stainless steel (inox) Finish: matt chrome Packaging: supplied in protective case Application: internal groove and slot measurement FAQ What measuring range does this caliper cover? The instrument measures from 35 to 300 mm and is intended for standard workshop tasks; the item is Metav IndustryLine caliper M201.138. What is the display resolution and scale type? This is an analogue vernier with a 0.05 mm reading; the mechanical scale provides a straightforward visual readout. Is the caliper suitable for regular shop‑floor use? Yes. The stainless steel construction with matt‑chrome finish and the locking screw make the caliper robust enough for routine production checks. Is a protective case included with the product? Yes. The caliper is supplied in a protective case for safe transport and storage between workstations. What accuracy can be expected from this vernier caliper? The specified accuracy is 0.15 mm, suitable for general inspection and workshop measurement tasks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
3500mm Digital Precision Caliper Colour 2.4" Touchscreen Wireless/USB ISO 17025 Calibration, Aluminium Body - Microtech Metrology
Take advantage of the combination of an extra‑long 3,500 mm measuring range, a 2.4" colour touchscreen with Wireless + USB data transfer and full ISO 17025 calibration with certificate for dependable large‑format measurement. Order the Precision Caliper directly via Metav Werkzeuge or ask our consultants for application advice. Precision Caliper — Microtech Metrology (extra‑long, digital with touchscreen) The Precision Caliper is a digital, extra‑long measuring instrument designed for reproducible measurements of large components in heavy machining, fixture and vessel manufacture. Extra‑long 3,500 mm measuring range Colour 2.4" touchscreen display Wireless + USB data interface Supplied with ISO 17025 calibration certificate Measure large components with repeatable stiffness and reach The caliper’s 3,500 mm measuring range classifies it in the extra‑long category, suited for large flanges, housings and pipe sections where single‑piece measurement is required. Constructed from aluminium, the beam balances low weight with adequate profile stiffness to keep deflection manageable over long spans; the extended jaw length 1,000 mm improves contact options for deep or irregular geometries. This design reduces handling time compared with multiple short measurements and helps maintain reproducibility on heavy workpieces. Traceable accuracy and calibrated readiness for inspection Delivered fully calibrated to ISO 17025 with a calibration certificate, this instrument supports documented quality processes and audit trails. The stated accuracy of ±0.24 mm and the specified measuring force 1–20 N set clear expectations for tolerance planning on large assemblies. Because the tool arrives with an accredited certificate, metrology departments and quality managers can integrate it into inspection routines immediately without additional calibration steps. Faster inspections through digital readout and data transfer The 2.4" colour touchscreen provides clear numeric and function feedback, while the Wireless + USB data output enables direct logging to measurement software or production databases. This digital workflow minimises transcription errors and accelerates SPC or first‑article reporting. Intuitive controls reduce training time for operators and the digital interface helps connect the instrument with traceability systems in modern workshops and Industry 4.0 environments. Built for workshop use and long‑term reliability Aluminium construction and robust carriage components ensure the caliper tolerates regular handling in heavy‑duty environments. The extra‑long format is specifically intended for large‑scale fabrication tasks where fewer setups and fewer handoffs reduce cumulative measurement uncertainty. Supplied as a calibrated measuring instrument, it supports both production control and incoming inspection with documented credibility from delivery. For measurement tasks that demand long reach and documented precision, choose Microtech Metrology’s extra‑long solution and contact Metav Werkzeuge in Emmerich for tailored supply and application support: info@metav-werkzeuge.com / +49 2822 7131930 Technical data Article number: 142135102 GTIN: 4061905037207 Manufacturer: Microtech Metrology Material: Aluminium Display: Colour 2.4" touchscreen Data output: Wireless + USB Facts Measuring range: 0–3,500 mm Accuracy: ±0.24 mm Measuring force: 1–20 N Jaw length: 1,000 mm Digital: yes Special features ISO 17025 calibration and certificate included Extra‑long format for large components Wireless data transmission and USB connection Colour touchscreen for intuitive operation Suitable for workshop and inspection use FAQ Is this caliper suitable for measuring large housings and flanges? Yes. The Precision Caliper from Microtech Metrology, SKU 142135102, is designed for large housings and flanges with its 3,500 mm measuring range and extended jaws. Does the instrument arrive calibrated for immediate use in inspection? Yes. The tool is delivered fully calibrated to ISO 17025 and includes a calibration certificate for immediate integration into quality processes. How is measurement data captured and exported? Measurement values can be exported via the built‑in Wireless interface or through the USB port for direct logging into inspection software. What level of handling force is appropriate for reliable readings? The caliper specifies a measuring force range of 1–20 N; maintaining consistent force within this range helps achieve the stated accuracy of ±0.24 mm. Is the device suitable for everyday workshop conditions? The aluminium construction and robust carriage design make the instrument appropriate for regular workshop use, particularly where long‑span measurements are required. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
3500mm Digital Precision Caliper Colour 2.4" Touchscreen, Wireless USB, ISO 17025 Calibrated - Microtech Metrology
Taking advantage of an extra‑long 0–3500 mm measuring range, integrated Wireless+USB data output and full ISO 17025 calibration, this instrument delivers reproducible, traceable measurements for large components; order directly through Metav Werkzeuge or consult our advisors for specification matching. Digital Caliper 0–3500 mm by Microtech Metrology — extra‑long range with 2.4″ colour touchscreen and Wireless+USB The Digital Caliper is an extra‑long measuring instrument designed for large assemblies and workshop metrology, combining a broad 0–3500 mm range with a compact aluminium profile for manageable handling and precise data capture. Extra‑long 0–3500 mm measuring range 2.4″ colour touchscreen display Wireless+USB data output for SPC Delivered calibrated to ISO 17025 Measure large structures with repeatable precision The extra‑long measuring capability of 0–3500 mm addresses applications in heavy machining, large‑format assemblies and pipe or vessel work where standard calipers fall short. An aluminium beam keeps the instrument lightweight relative to its span, reducing operator fatigue and helping preserve alignment during extended measurements. The long jaw length 600 mm provides practical reach into recesses and across broad faces, while the construction focuses on profile stiffness to maintain reproducibility over the full travel. For production environments this means fewer transfers to other gauges and faster inspection cycles without sacrificing consistency. Capture reliable digital readings and integrate seamlessly Equipped with a 2.4″ colour touchscreen and Wireless+USB outputs, the caliper simplifies manual reading and direct machine‑data transfer for statistical process control. The display shows clear numeric values and simple menus for zeroing and unit selection, while the digital interface enables direct logging into measurement software or spreadsheets. Resolution is 0.01 mm, which supports typical workshop tolerances, and the stated nominal accuracy of 0.16 mm should be considered when planning inspection strategies; resolution and accuracy are distinct—resolution defines the smallest display step, accuracy denotes the expected deviation. Full traceability is ensured by delivery with an ISO 17025 calibration certificate, making the readings suitable for formal quality documentation. Designed for workshop efficiency and reliable procurement Beyond individual measurements, the instrument is built to reduce cycle time and documentation overhead. Wireless transmission removes repetitive manual entry, lowering transcription errors and speeding reporting; USB provides a dependable wired option where wireless is restricted. The robust touchscreen and corrosion‑resistant aluminium finish support everyday shopfloor use, while the extended span reduces the need for multiple instruments. For buyers seeking validated measurement solutions, the combination of long range, digital interfacing and accredited calibration creates a pragmatic balance between reach, data quality and operational efficiency — a clear fit for toolrooms, fixture builders and large‑component inspectors. Contact Metav Werkzeuge today to discuss how this ISO 17025‑calibrated extra‑long digital caliper with Wireless+USB can be integrated into production measurement routines and to arrange delivery from Emmerich. Technical data SKU: 142135162 GTIN: 4061905455704 Manufacturer: Microtech Metrology Core specifications Measurement range: 0–3500 mm Resolution (reading): 0.01 mm Accuracy (nominal): 0.16 mm Jaw length: 600 mm Special features Aluminium construction Colour 2.4″ touchscreen display Wireless+USB data output Delivered calibrated to ISO 17025 with certificate FAQ What measurement range does this caliper cover? The digital caliper from Microtech Metrology covers a measuring range of 0–3500 mm, making it suitable for extra‑long components and assemblies. Is the instrument supplied with official calibration? Yes — the instrument is delivered fully calibrated to ISO 17025 and includes a calibration certificate for quality documentation. How are readings exported for SPC? Data can be exported via Wireless+USB; the caliper supports direct transfer to inspection software or spreadsheets for statistical process control. What resolution and accuracy can be expected? The display resolution is 0.01 mm; the nominal accuracy is specified as 0.16 mm; users should plan tolerances accordingly for final verification steps. Which material is the caliper made from and why does that matter? The beam and frame are aluminium, which reduces weight over the long span while maintaining sufficient stiffness for repeatable measurements. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
3500mm Digital Precision Caliper Colour 2.4" Touchscreen, Wireless USB, ISO 17025 Calibrated - Microtech Metrology
Take advantage of the extra‑long measuring range, integrated wireless and USB data transfer, and factory calibration for a consistent, auditable measuring workflow; order via Metav Werkzeuge or consult Metav's specialists for integration support. Digital Caliper — extra‑long 3,500 mm range with 2.4″ colour touchscreen (Microtech Metrology) The Digital Caliper is an extra‑long measuring instrument for large‑format component inspection, designed for workshop and production environments Extra‑long 3,500 mm measuring range 2.4″ colour touchscreen display Wireless and USB data output Supplied fully calibrated to ISO 17025 Reliable measurement for large components Designed for shop floors and measurement benches, the 3,500 mm extra‑long caliper delivers the reach required for shafts, pipes and large housings while keeping handling practical. The lightweight aluminium beam reduces transport weight and, combined with a 400 mm jaw length, preserves stiffness along the measuring length to maintain repeatable readings. This scale length is classified as an extra‑long caliper and is particularly suitable where single‑piece control of long components avoids stitch‑measuring and assembly errors. Fast data capture and clear readout Measurements appear on a 2.4″ colour touchscreen with a resolution of 0.01 mm, improving legibility and reducing interpretation errors compared with analogue readouts. The unit offers both Wireless and USB data outputs so measured values can be logged directly to inspection software or spreadsheets, cutting paperwork and the risk of transcription mistakes. Integrated digital output streamlines quality checks and supports traceable data collection for process control. Traceable calibration and workshop readiness The instrument is supplied fully calibrated to ISO 17025 and includes a calibration certificate, providing documented traceability for audits and incoming inspection. Stated repeatability and systematic deviation are within ±0.12 mm, a tolerance level suited to large‑format dimensional checks and machining set‑up tasks. Robust electronics and construction minimise operator influence and help maintain consistent measurement conditions across shifts. For assistance selecting the right Microtech Metrology caliper for large‑format inspection or to arrange purchase and delivery via Metav Werkzeuge, contact Metav Werkzeuge GmbH at +49 2822 7131930 or info@metav-werkzeuge.com Technical Data Article number: 142135142 GTIN: 4061905455698 Manufacturer: Microtech Metrology Digital display: Colour 2.4" touchscreen Facts Measuring range: 0–3,500 mm Resolution: 0.01 mm Accuracy / repeatability: ±0.12 mm Jaw length: 400 mm Special features Material: Aluminium Data output: Wireless + USB Delivered calibrated to ISO 17025 Extra‑long digital caliper for large components FAQ What maximum length can be measured with this caliper? The caliper measures up to 3,500 mm in a single pass; the extra‑long range is intended for large shafts, pipes and housings and is supplied under SKU 142135142. Is the instrument delivered ready for traceable inspection work? Yes — the device is supplied fully calibrated to ISO 17025 and includes a calibration certificate for audit and quality‑assurance purposes. How are measurement values transferred to a PC or SPC system? Values can be exported by Wireless or USB connection; the touchscreen display and digital outputs support direct logging into inspection software and spreadsheets. What resolution and accuracy does the device provide? The display resolution is 0.01 mm and the stated repeatability/systematic deviation is ±0.12 mm, a specification suitable for large‑format workshop checks. Which materials suit this caliper's application range? The aluminium beam and extra‑long design are optimised for measurements on large metallic components, assemblies and pipework where single‑pass length coverage reduces handling and alignment errors. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
3500mm Precision Caliper Built‑In Wireless+USB Color 2.4" Touchscreen, ISO 17025 Calibrated, HD Microscope Included - Microtech Metrology
Take advantage of the combination of traceable calibration, long‑range capability and modern data connectivity for reliable large‑format measurement. Order the built‑in precision caliper directly via Metav Werkzeuge or consult our specialists for integration advice. Built‑in Precision Caliper — 3,500 mm range, 2.4" colour touchscreen (Microtech Metrology) The built‑in precision caliper is a digital measuring system designed for extra‑long components and fixture inspection in production and quality control environments. ISO 17025‑calibrated on delivery 3,500 mm extra‑long measurement range Wireless and USB data output 2.4" colour touchscreen readout Traceable accuracy for dependable quality control Delivered fully calibrated to ISO 17025, this instrument supports documented traceability for audit‑grade measurements. The digital readout with a resolution of 0.001 mm provides a high‑precision basis for process decisions, while the calibration certificate included with the product removes uncertainty at hand‑over. Combining certified accuracy with a robust digital system reduces rework and shortens quality‑control loops. Streamlined data flow to speed up inspection cycles Equipped with wireless and USB connectivity and a 2.4" colour touchscreen, the caliper integrates easily into digital workflows. Measurement values can be transferred directly to inspection software, avoiding transcription errors and saving operator time. The touchscreen facilitates quick menu access and clear value presentation, making data capture both efficient and auditable for statistical process control and traceability purposes. Extra‑long performance with manageable handling Classified for extra‑long measurement tasks, the instrument covers a maximum range of 3,500 mm while balancing rigidity and weight through its aluminium construction. Roller support has been incorporated to aid smooth longitudinal movement, ensuring reproducible readings along the full length. This combination of range and handling is especially suitable for large housings, long shafts and fixture components where repeatable linear measurement is essential. Supplied ready for visual inspection and setup The package includes an HD microscope with 7" LED display, enabling close‑up visual checks of edges, reference points and measurement marks without separate equipment. Together with the digital caliper, this allows rapid setup verification and helps to confirm measurement locations before committing to an inspection sequence. The integrated kit reduces procurement complexity and accelerates commissioning on the shop floor. For traceable, extra‑long measurement capability from Microtech Metrology—contact Metav Werkzeuge for procurement and application support at info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: 142535158 GTIN: 4061905037245 Manufacturer: Microtech Metrology Material: aluminium Measurement range: 0–3,500 mm Display: Colour 2.4" touchscreen Data output: Wireless and USB Calibration: ISO 17025 certificate included Accessory: HD microscope with 7" LED display Digital: yes Facts Measurement range: 0–3,500 mm Resolution: 0.001 mm Touchscreen size: 2.4 inch colour Microscope display: 7 inch LED Special features ISO 17025 calibration certificate included Roller support for long‑range measurements Wireless and USB connectivity HD microscope supplied for visual inspection Aluminium design for stiffness and reduced weight Digital colour touchscreen readout FAQ Is the instrument delivered calibrated? Yes. The Microtech Metrology built‑in precision caliper is supplied fully calibrated with an ISO 17025 certificate. What measurement range and resolution are available? The device covers up to 3,500 mm and offers a resolution of 0.001 mm for high‑precision linear measurement. Which data interfaces does the caliper support? Data export is available via wireless and USB connections, enabling direct integration into inspection and QC systems. For which applications is this caliper best suited? It is intended for large‑format components such as long shafts, housings and fixtures where extra‑long, reproducible linear measurement is required. Is a microscope included with the measuring system? Yes. An HD microscope with a 7" LED display is included to support visual checks and precise positioning during inspection. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
4-40mm Three-Point Precision Calliper Matt Chrome Stainless Steel 0.05mm Vernier, Supplied in Case - Metav IndustryLine
Compact, corrosion-resistant and optimised for micro bores: the matt-chrome, stainless steel 3-point caliper M201.130 combines a precise analogue vernier with a 4–40 mm measuring range and a 0.05 mm graduation for reliable repeatability. Order the 3-point caliper directly via Metav Werkzeuge or ask our consultants if needed. 3-point caliper M201.130 — analogue caliper, 4–40 mm, matt chrome stainless The 3-point caliper M201.130 is an analogue internal measuring instrument for precise inspection of small bores and fine mechanical components in workshops and toolrooms. Matt-chrome finish, corrosion-resistant stainless steel Measurement range 4–40 mm for micro bores Vernier scale with 0.05 mm graduation Delivered in protective case for transport Accurate internal measurement for micro components The three-jaw geometry provides a stable contact around a bore and reduces alignment error compared with two-point probes; this makes the instrument especially suited to small-diameter work where concentricity and repeatability matter. Classified in the micro range (4–40 mm), the device delivers an analogue 0.05 mm graduation on a traditional vernier scale, a level that corresponds to standard industrial tolerances. The design is therefore ideal for assembly checks, fit verification and simple quality control tasks where a mechanical reading is preferred over electronic displays. Durable finish and straightforward handling A matt chrome finish over stainless construction ensures long-term resistance to corrosion and light workshop wear while keeping reflective glare low during measurement. The analogue layout keeps maintenance straightforward: no batteries, no electronics to fault, and simple cleaning preserves accuracy. A protective transport case is supplied, securing the instrument during storage and transit and supporting routine workshop logistics without additional packaging. Workshop fit, classification and practical benefits Designed as a compact internal measuring tool, this caliper bridges hand measuring and bench metrology: it is easy to handle for repetitive checks and compact enough for tight workspaces. The vernier system supports quick readings and immediate decisions on pass/fail limits, providing a highly pragmatic solution for machining and inspection stations. Supplied by Metav IndustryLine, the instrument complements a broad workshop toolkit and fits well where robust, low-maintenance gauges are required. For reliable micro-bore measurement and workshop-ready precision, choose the Metav IndustryLine 3-point caliper and contact Metav Werkzeuge in Emmerich for tailored advice and prompt supply Technical data Article number: M201.130 GTIN: 4054469100623 ECLASS: 21170329 Category: Messschieber Application: 3-point measurement Material: stainless steel (inox) Finish: matt chrome Type: analogue vernier caliper Delivered in protective case Core specifications Measurement range: 4–40 mm Resolution / graduation: 0.05 mm Tariff number: 90173000 Special features 3-point measuring jaws for internal diameters Analogue vernier reading Corrosion-resistant stainless construction Protective case for transport FAQ What measuring range does the caliper cover? The 3-point caliper M201.130 measures internal diameters from 4–40 mm and is classified for micro-range applications. How precise is the reading on this instrument? Readings are taken on an analogue vernier with a 0.05 mm graduation, providing standard industrial-level precision for workshop checks with the Metav IndustryLine caliper. Is the caliper suitable for internal diameter measurements of small bores? Yes, the three-jaw design is intended for internal diameter measurement and gives stable, repeatable contact around small bores. Does the instrument come with protective packaging? The caliper is supplied in a protective transport case to safeguard the instrument during storage and movement. Can the caliper be used in daily workshop inspection routines? The analogue vernier layout and robust stainless finish make this caliper well suited for regular inspection tasks and simple go/no-go checks within a production environment. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
4000mm Built-In Digital Caliper Color 2.4" Touchscreen, Wireless USB, IP54 - Microtech Metrology
Take advantage of the combination of an extra‑long measuring range, reliable wireless and USB data transfer and robust IP54 protection for reproducible measurements on large components; order directly via Metav Werkzeuge or consult our product specialists for integration advice. Embedded digital caliper (Einbaumessschieber) — Microtech Metrology, 0–4000 mm, touchscreen Embedded digital caliper (Einbaumessschieber) for long‑range, workshop‑grade linear measurement with integrated data transfer and a colour touchscreen Wireless and USB data output for seamless capture Colour 2.4" touchscreen for fast readout and operation IP54 protection for dusty and damp environments Accurate large‑format measurement for production and assembly The extra‑long measuring range up to 4,000 mm places this instrument in the heavy‑duty class for large components and assemblies. Designed as an embedded linear measuring system, it reduces fixturing complexity and keeps the measurement axis aligned over long spans. With a reading resolution of 0.01 mm and a stated accuracy of 0.1 mm, the unit provides a clear cost‑effective trade‑off between reach and repeatability, suited to tasks such as long rail checks, pipe runs and fixture alignment where reproducible linear data is essential. Reliable digital readout and data handling to speed workflows A 2.4" colour touchscreen delivers a clear, tactile interface for immediate results, while wireless and USB outputs eliminate manual transcription and the associated error risk. The combination of display and data ports supports in‑line quality control and offline documentation alike; measured values can be exported directly to spreadsheets or inspection software, reducing administrative overhead and accelerating process feedback loops on the shop floor. Built for the workshop: protection and embedded installation The instrument’s embedded design allows flush installation into measuring stations or machine frames, saving bench space and protecting the scale from incidental knocks. The IP54 rating guards against dust ingress and splashes, extending service intervals in harsher environments. Mechanical build quality focuses on stable profile stiffness over long spans, which helps to keep deflection and repeatability within practical limits during routine measurement cycles. Integration benefits and practical advantages Installation as an in‑line device supports automated or semi‑automated processes; the clear numeric output and standard interfaces simplify connection to PLCs, data collectors or inspection databases. The device is classified for extra‑long range work, making it a pragmatic choice where traditional short‑range calipers would require multiple measurements or additional handling. This reduces cycle time and improves consistency across serial inspections. Contact Metav Werkzeuge today for application support and to discuss configuration options for the Embedded digital caliper from Microtech Metrology Technical data Article number: 142540140 GTIN: 4061905458972 Manufacturer: Microtech Metrology Measuring range: 0–4000 mm Display: Colour 2.4" touchscreen Data output: Wireless and USB Protection rating: IP54 Resolution (display): 0.01 mm Accuracy: 0.1 mm Facts Measuring range max: 4000 mm Reading resolution: 0.01 mm Accuracy: 0.1 mm Display size: 2.4 inches Protection class: IP54 SKU: 142540140 Special features Embedded / built‑in design for integration Digital caliper (messschieber digital) category Wireless and USB connectivity Colour touchscreen interface Suited to large‑format and heavy‑duty measurement tasks FAQ How long is the measuring range and what class does it belong to? The instrument measures from 0 to 4,000 mm and is classified as an extra‑long measuring solution suitable for large components and assemblies. What interfaces are available for data capture? The caliper offers both wireless and USB data output for direct transfer of measured values to inspection software or data loggers. What resolution and accuracy can be expected? The display provides a resolution of 0.01 mm while the specified measuring accuracy is 0.1 mm, making it suitable where long reach and reproducibility are required. Is the device suitable for workshop use under dusty or damp conditions? Yes, the unit has an IP54 protection rating, offering resistance to dust ingress and water splashes typical in workshop environments. Can the embedded design be integrated into automated inspection stations? Yes, the embedded format and standard data outputs facilitate integration into automated or semi‑automated inspection setups where continuous linear data is needed. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
4000mm Digitaler Messschieber, 0,01mm, IP 67, ISO 17025 Kalibrierung - Microtech Metrology
Kompakte Extra‑Lang Reichweite, kabellose Datenausgabe und ISO 17025-Kalibrierung sorgen für reproduzierbare Messungen und hohe Nachvollziehbarkeit; profitieren Sie von der Kombination aus robuster Bauweise, großer Messreichweite und sofort einsatzbereiter Kalibrierung über Metav Werkzeuge oder lassen Sie sich fachkundig beraten. Messschieber Digitaler Messschieber von Microtech Metrology (141073415) Der Messschieber liefert präzise Längenmessungen über große Strecken und eignet sich speziell für großformatige Komponenten in Werkstatt und Fertigung. Extra‑Lang: Messreichweite bis 4000 mm Digitale Anzeige: Swiss electric Digit Höhe 14 mm Kabellose Datenübertragung per Wireless IP 67 Schutz gegen Staub und zeitweiliges Untertauchen Lieferumfang mit Kalibrierzeugnis nach ISO 17025 Präzision und Rückverfolgbarkeit für großformatige Messaufgaben Das Instrument wurde für Anwendungen mit großer Reichweite konstruiert und adressiert damit den Bedarf an stabilen, reproduzierbaren Messwerten bei langen Messstrecken. Die Messreichweite von 4000 mm kombiniert mit einem groß dimensionierten Schenkelquerschnitt sorgt für erhöhte Steifigkeit und reduziert durchbiegungsbedingte Messfehler. Anwender profitieren von klaren Messergebnissen, die sich ohne aufwendige Nachbearbeitung in Prüfprotokolle übernehmen lassen. Messdatenverarbeitung und Laborbereitschaft Die integrierte Swiss electric Anzeige mit 14 mm Höhe ermöglicht eine schnelle Ablesung auch bei ungünstigen Lichtverhältnissen, während die Wireless-Schnittstelle die Datenaufnahme in Messprotokolle und Prüfsoftware vereinfacht. Die Lieferung erfolgt inklusive Kalibrierung nach ISO 17025 und beiliegendem Kalibrierzeugnis, sodass das Gerät sofort für abnahmefähige Prüfungen eingesetzt werden kann. Das reduziert Einrichtungszeiten und erhöht die Planungssicherheit in der Produktion. Robustheit und Praxistauglichkeit im Arbeitsalltag Mit dem Schutzgrad IP 67 ist das Gerät gegen Staub geschützt und verträgt zeitweiliges Untertauchen, wodurch die Lebensdauer in rauen Fertigungsumgebungen steigt. Die robuste Konstruktion und die überdimensionierten Messschenkel verbessern die Handhabung bei großen Werkstücken; dadurch sinkt der Zeitaufwand pro Messung und die Effizienz in der Fertigung steigt. Einsatzbereiche und Zielgruppe Das Gerät richtet sich an Anwender im Vorrichtungs‑ und Formenbau, in der Schwerzerspanung sowie an Messlabore, die großdimensionierte Bauteile prüfen. Durch die Kombination aus Extra‑Langem Messbereich, digitaler Anzeige und kalibrierter Auslieferung ist das Instrument besonders geeignet für Prüffelder, die Nachvollziehbarkeit und industrielle Messprotokolle verlangen. Jetzt die Präzisionskompetenz von Microtech Metrology nutzen: Für verlässliche Messungen mit großer Reichweite empfehlen wir die Bestellung über Metav Werkzeuge. Bei Fragen zur Einsatzfähigkeit oder zur Integration in Ihre Prüfprozesse steht der technische Vertrieb gerne zur Verfügung – per eMail: info@metav-werkzeuge.com oder Telefon: +49 2822 7131930, WhatsApp: +49 170 2837271. Produktmerkmale Artikelnummer: 141073415 Marke: Microtech Metrology ECLASS: 21170344 Messsystem: ABS Digitalanzeige: Swiss electric Digit Höhe 14 mm Messbereich: 0-4000 mm Querschnitt: 53x8 Daten Ablesung: 0,01 mm Genauigkeit: 0,13 mm Messbereich Min: 0 mm Messbereich Max: 4000 mm Schnabellänge: 300 mm Besonderheiten IP 67: Schutz gegen Staub und zeitweiliges Untertauchen Datenausgang: Wireless (kabellose Datenübertragung) Digitale Anzeige: gut ablesbare 14 mm Ziffern ISO 17025: Kalibrierung nach ISO 17025, Kalibrierzeugnis liegt bei Digital: für einfache Datenübernahme in Prüfprozesse FAQ Welche Messgenauigkeit erreicht das Gerät bei langen Messstrecken? Die Genauigkeit liegt bei ±0,13 mm, gemessen an den technischen Angaben des Microtech Metrology digitalen Messgeräts (Artikelnummer 141073415), wodurch es für viele Fertigungs‑ und Prüfaufgaben mit großem Messbereich einsetzbar ist. Ist die Kalibrierung für abnahmefähige Prüfungen ausreichend? Ja, der Messschieber von Microtech Metrology wird kalibriert nach ISO 17025 ausgeliefert; das beiliegende Kalibrierzeugnis bestätigt die Labornachweisführung und erleichtert die Integration in Prüfabläufe. Wie werden Messdaten aus dem Gerät übernommen? Der Datenausgang erfolgt Wireless, sodass Messwerte direkt in Prüfsoftware oder Datenerfassungssysteme übertragen werden können; die digitale Anzeige mit 14 mm Ziffern unterstützt zusätzlich die schnelle manuelle Erfassung. Für welche Anwendungen eignet sich das Instrument besonders? Das Gerät ist speziell für großformatige Bauteile konzipiert und empfiehlt sich für Vorrichtungsbau, Formenbau und Schwerzerspanung, wo lange Messstrecken und robuste Handhabung gefragt sind. Hersteller: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
4000mm Lang-Messschieber, digitale Swiss Electric Anzeige 11mm, IP 67, ISO 17025 kalibriert, ABS Messsystem - Microtech Metrology
Der Microtech Metrology Messschieber überzeugt durch seinen Extra‑Langen Messbereich von 4.000 mm und die werkstattgerechte Robustheit mit IP 67 Schutz sowie durch die ISO 17025 Kalibrierung mit Kalibrierzeugnis; diese Kombination liefert verlässliche Messergebnisse und erleichtert die Integration in Qualitätsprozesse. Bestellen Sie das Gerät direkt über Metav Werkzeuge oder fragen Sie unsere Beratung bei technischen Details an. Messschieber – Digitaler Messschieber von Microtech Metrology Der Messschieber ist ein digitaler, robust ausgelegter Präzisionsschieber für großformatige Messaufgaben mit hohem Anspruch an Lesbarkeit und Rückführbarkeit. Extra‑Langes Messspektrum bis 4.000 mm IP 67 Schutz für nasse und staubige Umgebungen ISO 17025 Kalibrierung mit Kalibrierzeugnis Swiss electric Digit Anzeige, Höhe 11 mm, gut ablesbar ABS Messsystem für sofortige Positionsinformation Große Reichweite und stabile Bauweise für schwere Teile Der Schieber richtet sich an Anwender, die wiederholbare Messungen an großformatigen Bauteilen benötigen. Der Messbereich 4.000 mm macht dieses Instrument zur passenden Wahl für Rohr‑ und Behälterbau, Schwerzerspanung oder Vorrichtungsbau, wo lange Messwege gefragt sind. Durch den Querschnitt von 53 × 8 mm und eine Schnabellänge von 300 mm bleibt die Tiefenführung stabil, was die Reproduzierbarkeit von Aussen‑ und Stufenmessungen verbessert. Diese Ausführung ist auf robuste Praxisbedingungen ausgelegt und erleichtert das Handling großer Komponenten. Messgenauigkeit, Ablesbarkeit und Kalibrierung erklärt Zur Messwertinterpretation sind Ablesung 0,01 mm und Genauigkeit 0,13 mm zentrale Kenngrößen: Die Ablesung beschreibt die Auflösung des Displays, die eine Differenzierung von Hundertsteln ermöglicht, die Genauigkeit gibt die zu erwartende Messabweichung an. Dank ISO 17025 Kalibrierung wird das Werkzeug mit einem Kalibrierzeugnis ausgeliefert, das Rückführbarkeit und Prüfnachweis für Qualitätsmanagementsysteme gewährleistet. Die digitale Anzeige vom Typ Swiss electric Digit mit 11 mm Höhe sorgt für ergonomische Ablesbarkeit auch bei anspruchsvoller Werkstattbeleuchtung. Geeignet für industrielle Anwendungen und klare Zielgruppen Dieses Messgerät ist konzipiert für Fertigungsbetriebe, Qualitätssicherung und Werkzeugbau, die große Maßstäbe verifizieren müssen. Anwender profitieren von der Kombination aus Reichweite, Schutzklasse und Kalibrierbarkeit, wodurch der Schieber in Prüfplänen und Fertigungsdokumentationen direkt einsetzbar ist. Für Laboranwendungen mit extremen Präzisionsanforderungen empfiehlt sich die Prüfung der geforderten Fehlergrenzen; für viele Werkstattaufgaben bietet dieses Gerät eine praktikable Lösung. Bedienkomfort, Messsystem und Schutzmerkmal Das ABS‑Messsystem liefert sofortige Positionsdaten ohne erneutes Referenzfahren, was Zeit spart und Bedienfehler reduziert. Die Digitalanzeige ist großformatig ausgeführt, sodass Messergebnisse schnell und sicher abgelesen werden. Mit IP 67 Schutz ist der Schieber gegen Eindringen von Staub und zeitweiliges Untertauchen geschützt, wodurch er sich in rauen Umgebungen bewährt. Die robuste Fertigung und die ISO‑Kalibrierung unterstützen die Integration in Prüfprozesse und sorgen für langfristige Einsatzfähigkeit. Empfehlung: Der Microtech Metrology Messschieber mit 4.000 mm Messbereich und ISO 17025 Kalibrierung bietet die zuverlässige Grundlage für großformatige Messaufgaben – bestellen Sie direkt bei Metav Werkzeuge oder kontaktieren Sie unsere Technische Beratung per E‑Mail info@metav-werkzeuge.com. Produktmerkmale Artikelnummer: 141073405 Marke: Microtech Metrology Bezeichnung: Messschieber GTIN: 4061905454516 Messsystem: ABS Daten Messbereich: 0–4.000 mm Messbereich maximal: 4.000 mm Ablesung: 0,01 mm Genauigkeit: 0,13 Schnabellänge: 300 mm Querschnitt: 53×8 mm Anzeigehöhe: 11 mm Besonderheiten IP 67: Schutz gegen Staub und zeitweiliges Untertauchen ISO 17025 Kalibrierung: Kalibrierzeugnis liegt bei Swiss electric Digit: Digitale Anzeige, 11 mm Höhe ABS: Absolutmesssystem, sofortige Positionsinformation Extra‑Lang: Messbereichskategorie für 2.000–5.000 mm, geeignet für großformatige Komponenten FAQ Wie genau ist der Messschieber in der Praxis? Der Messschieber von Microtech Metrology (SKU 141073405) verfügt über eine Ablesung von 0,01 mm und eine angegebene Genauigkeit von 0,13, wodurch er für viele industrielle Anwendungen mit mittlerer bis großer Messlänge verlässliche Ergebnisse liefert. Wird das Gerät kalibriert geliefert? Ja, der Microtech Metrology Messschieber wird nach ISO 17025 kalibriert ausgeliefert; das Kalibrierzeugnis liegt dem Lieferumfang bei und erlaubt die direkte Nutzung in rückführbaren Messabläufen. Für welche Einsätze ist der Schieber mit 4.000 mm geeignet? Mit seinem Extra‑Langen Messbereich eignet sich das Gerät besonders für Rohr‑ und Behälterbau, Schwerzerspanung und Vorrichtungsbau, also überall dort, wo lange Messstrecken reproduzierbar erfasst werden müssen. Wie wetterfest ist das Messgerät? Der Schieber ist mit IP 67 klassifiziert, das schützt vor Eindringen von Staub und erlaubt zeitweiliges Untertauchen, wodurch der Einsatz in nassen oder staubigen Produktionsbereichen möglich ist. Welche Vorteile bietet das ABS Messsystem? Das ABS‑Messsystem von Microtech Metrology liefert sofortige Positionsinformationen ohne Referenzfahrt, was den Bedienaufwand reduziert und die Messzyklen beschleunigt. Hersteller: Microtech, Nizhneyurkovska str., 45a; 04080 Kyiv; Ukraine; tool@microtech.tools
4000mm Ultra‑Langer Digitaler Einbaumessschieber, 0,01mm Auflösung, IP 67, Big Screen Swiss Electronics - Microtech Metrology
Die Kombination aus Extra‑Langem Messbereich, robuster Schutzart und hoher Auflösung sorgt für präzise, reproduzierbare Ergebnisse auch bei großformatigen Bauteilen; nutzen Sie die Messgenauigkeit und die robuste Bauweise für zuverlässige Fertigungsprüfungen. Bestellen Sie das Einbaumessschieber direkt über Metav Werkzeuge oder fragen Sie unsere Beratung bei Bedarf an. Einbaumessschieber von Microtech Metrology Einbaumessschieber mit digitaler Anzeige für großformatige Längenmessungen im Industriellen Umfeld Einbaumessschieber für große Bauteile Messbereich bis 4000 mm für Extra‑Lang‑Messungen Auflösung 0,01 mm mit Big Screen Anzeige Schutzart IP 67 schützt vor Staub und Strahlwasser Für Einbau in Messsysteme und Prüfstände geeignet Lange Reichweite für großdimensionierte Bauteile und Produktionslinien Der Messbereich bis 4000 mm klassifiziert dieses Gerät als Extra‑Lang und macht es zur idealen Wahl für Anwendungen im Rohr‑ und Behälterbau sowie in der Schwerzerspanung. Durch die ausgelegte Länge lassen sich große Spannmittel und Gehäuse direkt in Prüfstände integrieren, ohne aufwändige Mehrfachmessungen. Die Konstruktion des Einbaumessschieber reduziert Durchbiegungseffekte, was die Reproduzierbarkeit von Serienprüfungen erhöht. Die Big Screen Swiss Electronics Anzeige erleichtert das Ablesen über große Entfernungen und in Produktionsumgebungen mit wechselnden Blickwinkeln. Präzision und Schutzart für belastbare Messdaten im Alltag Mit einer Ablesung von 0,01 mm und der angegebenen Genauigkeit von 0,11 mm liefert das Messgerät verlässliche Resultate für Fertigungsprüfungen. Die Auflösung beschreibt die kleinste unterscheidbare Schrittweite des Displays, die hier feine Differenzen sicher darstellt. Die Schutzart IP 67 sorgt dafür, dass das Instrument gegen Eindringen von Staub geschützt ist und zeitweiliges Untertauchen in Wasser verträgt, was den Einsatz direkt an Bearbeitungsmaschinen und in rauen Werkstattumgebungen ermöglicht. Einfache Integration und praxisorientierte Anwendung in Prüfständen Als digitaler, für den Einbau konzipierter Schieber lässt sich das Instrument platzsparend in Messvorrichtungen einbauen und mit konventionellen Prüfplänen kombinieren. Die Big Screen Anzeige vereinfacht die Ablesung bei stationären Anlagen, während das Gerät gleichzeitig als zuverlässige Langmesslösung für Serienkontrollen fungiert. Zielgruppen sind besonders Formenbauer, Vorrichtungsbauer und die Qualitätssicherung in der Serienfertigung, die eine großdimensionierte, wiederholbare Längenmessung benötigen. Verlässliche Partnerschaft: Microtech Metrology trifft auf Metav Die Kombination aus technischer Expertise von Microtech Metrology und der logistischen Stärke von Metav macht den Unterschied für Produktionsbetriebe, die Präzision und Versorgungssicherheit erwarten. Metav steht für eine breite Produktverfügbarkeit und praxisnahe Beratung, sodass die Beschaffung von Spezialwerkzeugen wie diesem Einbaumessschieber planbar und sicher erfolgt. Vertrauen auf bewährte Partnerschaften reduziert Beschaffungsrisiken und sichert durchgängige Messqualität in der Fertigung. Empfehlung: Für großformatige Längenmessungen die Microtech Metrology Einbaumessschieber mit Big Screen Anzeige wählen und die Bestellung über Metav Werkzeuge abwickeln; bei Rückfragen erreichbar per E‑Mail info@metav-werkzeuge.com oder Telefon +49 2822 7131930. Produktmerkmale Artikelnummer: 142540147 Marke: Microtech Metrology Bezeichnung: Einbaumessschieber GTIN: 4061905459788 Daten Messbereich: 0–4000 mm Ablesung: 0,01 mm Genauigkeit: 0,11 mm Besonderheiten Digitalanzeige: Big Screen Swiss Electronics Schutzart: IP 67 Digitales Messgerät ECLASS: 21170344 FAQ Wie groß ist der Messbereich dieses Einbaumessschieber? Der Messbereich beträgt 0–4000 mm, sodass der Einbaumessschieber von Microtech Metrology für Extra‑Lang‑Messungen und großformatige Bauteile geeignet ist. Welche Auflösung und Genauigkeit bietet das Gerät? Die Ablesung liegt bei 0,01 mm, die angegebene Genauigkeit beträgt 0,11 mm; diese Kombination liefert praxisnahe Präzision für Serienprüfungen. Ist das Gerät gegen Staub und Wasser geschützt? Ja, der Einbaumessschieber verfügt über die Schutzart IP 67 und eignet sich damit für Einsatzbedingungen mit Schmutz und zeitweiligem Wasserkontakt. Wie erfolgt die Ausgabe der Messwerte und ist das Display für Produktionsumgebungen geeignet? Die Anzeige erfolgt über die Big Screen Swiss Electronics Digitalanzeige, die für gute Lesbarkeit in Produktionsbereichen ausgelegt ist und die Integration in Prüfstände erleichtert. Hersteller: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
4000mm Workshop Digital Caliper 300mm Long Jaw, Colour 2.4" Touchscreen, Wireless/USB, ISO 17025 Calibrated - Microtech Metrology
Combine the 4,000 mm measuring range, ISO 17025 traceable calibration and Wireless + USB data output to secure repeatable, long‑span measurements; order the workshop caliper directly via Metav Werkzeuge or ask our consultants if needed. Workshop caliper — extra‑long digital caliper, 4,000 mm range (Microtech Metrology) The Workshop caliper is an extra‑long digital measuring instrument designed for large components and robust workshop metrology, offering a colour touchscreen and both wireless and USB data transfer for seamless documentation. Extra‑long 4,000 mm measuring range ISO 17025 calibration with certificate Wireless and USB data output Colour 2.4" touchscreen display Precision across large dimensions For measurement tasks that extend well beyond conventional bench work, the 4,000 mm measuring range and extra‑long design deliver clear practical benefits: extended reach without repeated setups and reduced fixturing time. The instrument’s construction balances stiffness and weight to keep deflection minimal over long spans, while the hand‑finished jaws and integrated fine adjustment enable controlled, repeatable contact. Those factors combine to reduce measurement scatter and improve process reliability when inspecting housings, large shafts or welded assemblies. Traceable results and seamless data capture Reliable documentation is essential for production control. The caliper comes with ISO 17025 traceable calibration and a certificate, ensuring that results meet audit and quality‑management demands. Digital output via Wireless and USB supports direct data collection to measuring software or SPC systems, eliminating manual transcription errors and speeding up reporting cycles. The on‑board Colour 2.4" touchscreen presents readings clearly and simplifies configuration for batch tasks, so instrument integration into standard workflows is straightforward. Repeatable contact and ergonomic handling Controlled measuring force is crucial for comparability across operators. With a measurement force range of 1–20 N and tactile fine‑adjustment, the instrument reduces operator‑induced variation and makes one‑person handling viable even on large parts. The ergonomics of the long jaw and the instrument’s user interface are designed for routine workshop use: quick clamping, gentle approach and a robust frame for daily handling. The result is faster inspection cycles with consistent outcomes. Built for the workshop — durability and serviceability Materials and finishing focus on a long service life under industrial conditions. The device includes hand‑finished measuring faces to reduce wear and maintain contact geometry, while the robust electronics and sealed interfaces protect the core measuring system. Fine‑tuning and maintenance are simplified by accessible adjustment features, and the wireless/USB outputs future‑proof data exchange. Supplied and supported via Metav Werkzeuge, the product is positioned for reliable supply and practical post‑sales support. For traceable, long‑span metrology with integrated data transfer and ISO 17025 calibration, contact Metav Werkzeuge in Emmerich for tailored advice and prompt supply. Technical data SKU: 141040256 GTIN: 4061905038839 Manufacturer: Microtech Metrology Facts Measuring range: 0–4,000 mm Resolution/reading: 0.01 mm Measuring force: 1–20 N Jaw length: 300 mm Display: Colour 2.4" touchscreen Special features Digital output: Wireless and USB Fine adjustment included Hand‑finished measuring jaws Delivered calibrated to ISO 17025 with certificate Extra‑long design for large components Suitable for robust workshop use FAQ Is the instrument delivered calibrated? Yes. The Workshop caliper (Microtech Metrology, SKU 141040256) is supplied fully calibrated to ISO 17025 and includes the calibration certificate for traceable documentation. What accuracy can be expected over the full measuring range? The instrument combines stable mechanics and controlled measuring force to ensure repeatable results across the 4,000 mm span; refer to the ISO 17025 certificate for specific uncertainty figures for the supplied unit. How is measurement data transferred to a PC or inspection system? Data transfer is provided via Wireless and USB outputs; the caliper’s digital interface and colour touchscreen simplify direct export to data‑collection or SPC software. Which workshop tasks suit this caliper best? The caliper is intended for large components such as housings, shafts and welded assemblies where extended reach and traceable measurements are required; its extra‑long design reduces repositioning and fixturing time. Does the caliper support fine control during measurement? Yes. The instrument features a fine‑adjustment mechanism and a controlled measuring force range (1–20 N) to reduce operator‑related variation and improve repeatability. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
400mm Digital Built-In Caliper Bidirectional Measurement, Capacitive System, DIN 862 - Metav IndustryLine
Combine a capacitive measuring system, a 400 mm range and DIN 862 conformity to secure repeatable medium‑range measurements; order the Digital embedded caliper directly via Metav Werkzeuge or consult our team for application advice. Digital embedded caliper M218.257 — 400 mm capacitive measuring system — Metav IndustryLine The Digital embedded caliper M218.257 is a vertical, stainless embedded measuring instrument designed for precise medium‑range workshop and production measurements, supplied with a comprehensive digital display and simple integration options. Capacitive measuring system for reliable readings 400 mm measurement range for medium assemblies DIN 862-compliant precision for workshop use Bidirectional measurement capability Consistent readings through a capacitive measuring principle The instrument uses a capacitive measuring system, which reduces mechanical wear and keeps readings stable over repeated cycles; with a standard display resolution of 0.01 mm and a nominal accuracy of 0.04 mm, the device provides a dependable basis for quality control and routine inspection. This measuring principle minimises friction and contact degradation compared with purely mechanical slides, so measurement scatter is reduced and recalibration intervals can be extended — a rational advantage for production environments that prioritise uptime and reproducibility. Practical range and digital integration for production workflows With a 400 mm measuring span the caliper falls into the medium category for shop use, offering the reach required for fixtures, housings and larger components while remaining manageable for single‑operator use. Compliance with DIN 862 ensures familiar operating semantics and traceable results. The embedded design features a full digital display with ON/OFF, mm/inch selection, zero/ABS, tolerance and hold functions, and an RB 5 data output for straightforward integration into data capture systems or statistical process control routines, supporting faster documentation and fewer manual transcription errors. Built for workshop durability and predictable operation Constructed for vertical, embedded installation in stainless material, the caliper resists typical workshop environments and keeps critical surfaces protected. The product supports bidirectional measurement, allowing both closing and opening directions to be recorded for consistent part inspection. These features translate into lower maintenance effort and reduced process variability, which benefits production planners and quality engineers seeking measurable improvements in first‑pass yield and auditability. The Metav IndustryLine offering aligns with the company’s practical approach to democratising precision for workshops and specialist suppliers. For medium‑range precision with easy integration, choose the Metav IndustryLine embedded caliper and contact Metav Werkzeuge for technical consultation or ordering at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M218.257 GTIN: 4054469111889 Label: Digital embedded caliper, 400 mm, vertical, stainless; DIN 862 Facts Measuring range: 0–400 mm Resolution: 0.01 mm Accuracy: 0.04 mm Measuring system: capacitive Data output: RB 5 Standard: DIN 862 Digital display functions: ON/OFF, mm/inch, 0/ABS, TOL, DIR, HOLD Special features Vertical embedded design Stainless construction Bidirectional measurement capability eClass: 21170344 Digital instrument FAQ What accuracy can be expected from this caliper? The caliper offers a nominal accuracy of 0.04 mm with a display resolution of 0.01 mm, which is suitable for standard workshop and quality control tasks with medium‑sized components. Can the instrument be integrated into data acquisition systems? Yes, the M218.257 provides an RB 5 data output for straightforward connection to data loggers or SPC systems, enabling automated recording of measured values. Is the instrument suitable for production use on larger assemblies? The 400 mm range places this caliper in the medium category, making it appropriate for medium‑sized fixtures, housings and assemblies frequently encountered in workshop and small‑series production. Does the caliper support measurements in both directions? Yes, the device allows bidirectional measurement so that readings taken while opening or closing the jaws remain consistent and comparable. What display and control functions are available? The embedded digital display includes ON/OFF, mm/inch conversion, zero/ABS reference, tolerance checks, direction indicator and a hold function for stable value capture. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
400mm Digital Einbaumessschieber senkrecht, 0,01mm, DIN 862 - Metav IndustryLine
Der 1989 gegründete Traditionsvertrieb von Messwerkzeugen steht mit seiner Eigenmarke Metav IndustryLine für Premium-Messwerkzeuge zu einem hervorragenden Preis. Mehr Reichweite, weniger Umspannen Mit einem Messbereich von 0 bis 400mm bleiben selbst ausgedehnte Werkstücke überschaubar. Große Flächen, lange Kanten und weit gesetzte Bohrungen lassen sich strukturiert abfahren, ohne das Bauteil zu drehen oder umzusetzen. Das erleichtert das Prüfen von Formplatten, Trägern, Profilen und Rahmenbauteilen im Vorrichtungs‑ und Formenbau. Der Vorteil zeigt sich im Ablauf: Du bleibst im Takt, behältst den Bezug und kommst schneller zu belastbaren Ergebnissen. Wir haben uns Gedanken gemacht, wie wir die einzelnen Messbereiche der Messschieber Klassifizieren können. Klassifizierung Messbereiche beim Messschieber. DIN 862 Unser Messwerkzeug wird vollständig nach den einschlägigen DIN-Normen gefertigt – sämtliche Materialien, Fertigungs- und Kalibrierverfahren entsprechen den Anforderungen der DIN 862. Damit sind Maßhaltigkeit und Wiederholgenauigkeit garantiert, Prüfzertifikate sind international kompatibel, und Audits oder Kundenfreigaben lassen sich deutlich schneller durchlaufen. Die DIN-Konformität sichert konstante Qualität, erleichtert die weltweite Einsetzbarkeit und stärkt das Vertrauen in jedes einzelne Messergebnis. Profi-Empfehlung: Führe Messungen immer unter gleichen Bedingung aus. Im Idealfall im einem Messlabor, das 20° Celsius vorhält. Sie sind unsicher, ob das Werkzeug für Ihre Anwendung geeignet ist? Oder benötigen Sie weitere technische Informationen? Kein Problem – sprechen Sie uns gerne an! 📧 eMail: info@metav-werkzeuge.com ☎️ Telefon: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Produktdetails: Marke: Metav IndustryLine Bezeichnung: Einbaumessschieber Bestellnummer: M218.457 Fakten zum Werkzeug: Messbereich: 0-400mm Gewicht: 0,4kg Norm: DIN 862 Ablesung: 0,01mm Datenausgang: RB 5 Ablesung in Inch/Zoll: 0,0005 Genauigkeit: 0,04mm Länge: 530mm Besonderheiten Ausführung: digital Material: Messschiene aus Aluminium (30x7,9mm) Anzeige: mit EIN/AUS-, mm/inch- und NULL-Taste Messsystem: kapazitiv senkrecht Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com Worauf man beim Kauf eines Messschiebers achten sollte: Die zusätzliche Ausstattung, darunter Datenausgänge und Messkraftkontrollen, erlangt neben der Genauigkeit und dem Messbereich erhebliche Bedeutung. Im Umfeld der Qualitätssicherung und in Laboreinrichtungen ist ein Messschieber mit kontrollierter Anwendungskraft besonders hilfreich. Zusätzlich sollten man darauf Achten, ob man einen kalibrierten Messschieber braucht. Das Kalibrierungsverfahren kann sofort bei Lieferung initiiert werden und bedarf für die Gewährleistung der Prozessstabilität einer jährlichen Wiederholung. Pflegehinweis - damit Sie lange etwas von Ihrem Messwerkzeug von Metav IndustryLine haben: Einbaumessschieber leben viele Jahrzehnte, wenn du sie sauber, leicht eingeölt, korrekt gelagert und regelmäßig geprüft hälst. Vermeide aggressive Lösungsmittel oder dicke Ölschichten, wische nach jedem Einsatz mit einem fusselfreien Tuch nach, schütze die Führungen mit einem Mikrofilm aus Instrumentenöl (z. B. Starrett M-1), lagere das Werkzeug trocken in seinem Etui mit leicht geöffneten Messflächen – am besten mit einem Silicagel-Beutel – und überprüfe Nullpunkt, Messflächen und Gleitspiel nach ISO-Temperaturnorm (20 °C).
400mm Digital Flush-Mount Caliper Horizontal 0.01mm Resolution DIN 862 Stainless Steel, 3V - Metav IndustryLine
Take advantage of the combination of robust shop‑floor durability, reliable 0.04 mm accuracy and a generous 400 mm measuring range for consistent production checks; order directly via Metav Werkzeuge or consult their specialists for system integration advice. Digital built-in caliper M218.157.N — 400 mm range, stainless hardened, DIN 862 Digital built-in caliper M218.157.N provides horizontal, embedded measurement capability for machine‑integrated and workshop environments. 400 mm measuring range Stainless hardened measuring jaws DIN 862 standard compliance Digital display with ON/ZERO/UNIT/HOLD Accurate readings for production control and QA This inset, electronic slide gauge is designed to deliver dependable shop‑floor measurement with a declared 0.04 mm accuracy and a 0.01 mm display resolution. The combination of a wide 400 mm measuring range and hardened stainless steel construction supports repeatable checks on medium‑sized components while resisting corrosion in industrial environments. Conformity with DIN 862 ensures the instrument meets established metrology conventions, which simplifies traceability and documentation for incoming inspection and in‑process quality control. Clear indications and secure data transfer for traceable results The instrument features a compact digital display with dedicated ON/OFF, ZERO, UNIT and HOLD keys for straightforward operation and quick unit changes. A dedicated RB 5 data output enables remote readout or connection to data collection systems, supporting automated logging without manual transcription. The small housing and horizontal mounting arrangement are optimised for embedded installation in fixtures or machine frames, preserving a low profile while allowing direct electronic interrogation of measured values. Built for workshop integration and long service life Constructed from stainless hardened steel, the gauge withstands daily handling and offers longevity under routine use. The built‑in design reduces external protrusions and protects the measuring system when installed in guarded stations or measuring fixtures. For production environments that require a balance between reach and stiffness, this caliper sits in the medium‑range class — offering sufficient span for larger subassemblies while remaining manageable for single‑operator tasks and fixture integration. Contact Metav Werkzeuge for tailored advice on integrating the M218.157.N into existing inspection rigs or to arrange prompt delivery from Emmerich — phone +49 2822 7131930 or e‑mail info@metav-werkzeuge.com Technical Data Article number: M218.157.N GTIN: 4054469160795 Manufacturer: Metav IndustryLine Standard: DIN 862 Weight: 0.8 kg Data Measuring range: 0–400 mm Resolution: 0.01 mm Readability (inch): 0.0005 in Accuracy: 0.04 mm Power: 3 V Tariff number: 90173000 Special features Material: stainless hardened steel Digital display with ON/OFF, ZERO, UNIT, HOLD Data output: RB 5 Small housing for built‑in horizontal mounting Category: precision caliper FAQ Is the caliper suitable for machine‑mounted measurement tasks? Yes. The built‑in design and small housing make the M218.157.N suitable for horizontal, embedded installation in fixtures and machine frames, allowing direct measurement within production equipment. What accuracy and resolution can be expected from this instrument? The caliper provides a display resolution of 0.01 mm and a stated measurement accuracy of 0.04 mm, appropriate for medium‑range workshop QC and integration tasks. Which materials can be measured with this caliper? The device measures dimensional features on a wide range of materials; the stainless hardened steel measuring faces ensure durability when used on common workshop metals and components. How is measurement data transferred from the caliper? Measurement values can be exported via the RB 5 data output, enabling connection to readout systems or data‑logging equipment for traceable records. Does the instrument comply with recognised metrology standards? Yes. The unit is built to comply with DIN 862, supporting standardised measurement practice and easier inclusion in documented quality procedures. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
400mm Digital Messschieber mit langem Messschnabel, 0,01mm, IP 67 - Microtech Metrology
Bereits im Jahr 2014 wurde von Microtech Metrology der Messschieber mit Messkraftkontrolle eingeführt. Seit dem besteht die Marktführerschaft und stetige Innovation in dem Bereich. HIGHLIGHTS für 400mm Messschieber von Microtech Metrology mit langem Messschnabel Messbereich: bis 400mm Ablesung: 0,01mm Ausführung: digital Datenausgang: Ohne Groß gedacht, sauber gemessen0 bis 400mm Bis 400mm Messbereich bedeutet: Bauteile dürfen ruhig größer sein, der Messfluss bleibt einfach. Längere Strecken, breite Auflager, weit auseinanderliegende Kanten – alles lässt sich direkt und nachvollziehbar prüfen. Ideal für Vorrichtungen, Formrahmen und Prüflehren, bei denen es auf wiederholbare Abstände und klare Bezugspunkte ankommt. Das Ergebnis: weniger Handgriffe, weniger Unterbrechungen, mehr Orientierung entlang der Linie – von der ersten Anlegekante bis zur letzten Kontrolle. Unsere Definition der EInteilung der Messbereiche. Klassifizierung Messbereiche beim Messschieber. Expertenhinweis: Wie stelle ich planparallelen Kontakt sicher? Messschenkel müssen vollständig anliegen; kippt der Schieber, entsteht ein systematischer Kippfehler. Bei Innenmessungen zusätzlich prüfen, ob beide Kreuzschnäbel anliegen. Produktmerkmale zumdigitalen Messschieber von Microtech Metrology: Bestellnummer: 141072411 Messbereich: 0 bis 400mm Marke: Microtech Metrology Bezeichnung: Messschieber Ausführung: digital Schnabellänge: 100mm Ablesung: 0,01mm Anzeige: Swiss electric Digit Höhe 11mm Datenausgang: Ohne Messsystem: ABS Genauigkeit: 0,03mm IP-Schutz: IP 67 mit langem Messschnabel mit ISO 17025 Kalibrierzertifikat Querschnitt: 17x5mm Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com Worauf beim Erwerb eines Messschiebers Wert gelegt werden sollte: Während der Genauigkeit und dem Messbereich Beachtung geschenkt werden muss, sind auch Funktionen wie Dateneingabe-Optionen und Kontrolle der Messkraft von maßgeblicher Relevanz. Der Einsatz eines Messschiebers mit kontrollierter Messkraft ist besonders in der Qualitätssicherung und in Laborumgebungen vorteilhaft. Ebenso sollte man überlegen, ob die Kalibrierung des Messschiebers erforderlich ist. Man kann die Kalibrierung bei Lieferung vornehmen und aus Gründen der Prozesskontinuität alle 12 Monate erneuern.
400mm Digitaler Messschieber, 0,01mm Auflösung, IP 67, Wireless, Swiss electric Display, ISO 17025 Kalibriert - Microtech Metrology
Die Kombination aus ISO 17025‑Kalibrierung, robustem Querschnitt und kabelloser Datenübertragung sorgt für verlässliche Messergebnisse und reibungslose Prozessintegration; bei Bedarf berät Metav Werkzeuge gern persönlich und liefert das Messwerkzeug direkt an Ihre Werkbank. Messschieber Digital von Microtech Metrology Der Messschieber Digital von Microtech Metrology bietet präzise Werkstatt‑ und Prüfmesstechnik für den Mittelbereich und eignet sich für vielseitige Messaufgaben im Maschinenbau und Formenbau. Microtech Metrology Messschieber Digital mit Wireless Datenübertragung Mittelbereich: 0–400 mm Reichweite, gute Steifigkeit Auflösung 0,01 mm, Messgenauigkeit 0,03 mm Swiss electric Anzeige, Ziffernhöhe 14 mm für klare Ablesung ISO 17025 Kalibrierung inklusive Prüfzeugnis Robuste Bauweise für reproduzierbare Messungen Dank des Querschnitts 17x5 und der langen Backen mit 100 mm Schnabellänge bleibt das Messgerät verwindungsarm und stabil in der Handhabung. Diese Konstruktion reduziert Messfehler bei Außen‑ und Stufenmessungen und ermöglicht reproduzierbare Ergebnisse auch bei wiederholten Prüfabläufen. Für Anwender im Vorrichtungs‑ und Formenbau bedeutet das: weniger Nacharbeit und bessere Maßtreue. Präzision, Ablesbarkeit und Messsicherheit Die Kombination aus Ablesung 0,01 mm und einer dokumentierten Genauigkeit 0,03 mm sorgt für eine belastbare Basis in der Qualitätskontrolle. Die Swiss electric Anzeige mit 14 mm Ziffernhöhe unterstützt schnelles Ablesen bei wechselnden Lichtbedingungen. So lassen sich sowohl Einzelmessungen als auch serielle Prüfungen effizient dokumentieren, ohne aufwendige Nachmessungen durchführen zu müssen. Moderne Schnittstellen und Schutz für den Werkstatteinsatz Mit der Wireless Datenausgabe können Messwerte direkt an Datenerfassungssysteme übermittelt werden, was manuelle Fehler beim Übertragen reduziert und Messprozesse automatisiert. Der IP 67 Schutz erhöht die Einsatzsicherheit in staubiger oder feuchter Umgebung und macht das Messgerät tauglich für anspruchsvolle Fertigungsbedingungen. Kalibrierungsnachweis und Einsatzempfehlung für Prüfprozesse Das Messwerkzeug wird mit ISO 17025‑Kalibrierung ausgeliefert, inklusive Kalibrierzeugnis, wodurch Prüfprozesse nachvollziehbar und auditfähig bleiben. Dadurch eignet sich das Gerät sowohl für firmeninterne Prüfmittelüberwachungen als auch für Lieferantenprüfungen, bei denen ein offizieller Kalibrierschein verlangt wird. Empfehlung: Für präzise Messaufgaben in Produktion und Labor den Microtech Metrology Messschieber mit ISO 17025‑Kalibrierung und Wireless Datenübertragung wählen; bei technischen Fragen oder Bestellwunsch erreichen Sie Metav Werkzeuge per E‑Mail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 Produktmerkmale Artikelnummer: 141072491 Marke: Microtech Metrology Bezeichnung: Messschieber GTIN: 4061905454608 Fakten Messbereich: 0–400 mm Ablesung: 0,01 mm Genauigkeit: 0,03 mm Schnabellänge: 100 mm Querschnitt: 17x5 Besonderheiten Datenausgang: Wireless Messsystem: ABS IP Schutz: IP 67 (Staubdicht, Schutz gegen zeitweiliges Untertauchen) Digital Anzeige: Swiss electric, Ziffernhöhe 14 mm ISO 17025 Kalibrierung: Kalibrierzeugnis inklusive FAQ Wie genau ist die Messung mit dem Messschieber von Microtech Metrology? Der Messschieber von Microtech Metrology erreicht eine Ablesung von 0,01 mm und eine angegebene Genauigkeit von 0,03 mm, womit er für viele Qualitätskontrollen im Maschinenbau und Formenbau geeignet ist. Wird der Messschieber kalibriert geliefert? Ja, der Microtech Metrology Messschieber wird mit ISO 17025‑Kalibrierung und zugehörigem Kalibrierzeugnis ausgeliefert, sodass die Prüfmittelverwaltung direkt dokumentierbare Nachweise erhält. Ist die Anzeige auch in schlecht beleuchteten Bereichen gut ablesbar? Die Swiss electric Anzeige mit 14 mm Ziffernhöhe sorgt für gute Lesbarkeit auch bei weniger optimaler Beleuchtung, was die Ablesesicherheit in Werkstattumgebungen erhöht. Kann man Messdaten direkt in ein Datenerfassungssystem übertragen? Der Messschieber verfügt über Wireless Datenübertragung, wodurch Messwerte einfach an Datenerfassungssysteme weitergeleitet werden können und manuelle Übertragungsfehler vermieden werden. Für welchen Messbereich ist dieses Gerät am besten geeignet? Mit einem Messbereich bis 400 mm gehört das Gerät in die Mittelklasse und eignet sich besonders für Werkstatt‑ und Fertigungsaufgaben, bei denen Reichweite und Handhabung gleichermaßen wichtig sind. Hersteller: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine; tool@microtech.tools
400mm Precision Caliper Monoblock Fine Adjustment Stainless Steel Matt Chrome Scale, DIN 862, Supplied in Case - Metav IndustryLine
Take advantage of the combination of monoblock hardened stainless steel, a 0–400 mm measuring range and a fine-adjustment thumb screw for repeatable, workshop-grade results; order the caliper directly via Metav Werkzeuge or consult our specialists for application advice. Workshop Caliper M201.324 — Monoblock stainless caliper, 0–400 mm range, fine-adjustment (Metav IndustryLine) The Workshop Caliper M201.324 is an analogue slide caliper designed for medium-range workshop measurement tasks, combining a rigid single-piece frame with a precise Vernier scale for repeatable dimensional control. 0–400 mm measuring range for medium components Monoblock hardened stainless steel construction Fine-adjustment thumb screw for precise setting Vernier scales: 1/20 mm (0.05 mm) and 1/128" reading Robust construction for repeatable workshop measurement A rigid monoblock frame and hardened stainless steel material give this slide caliper durability and rigidity where it matters: across the full 0–400 mm range. Classified as a medium-range instrument (300–500 mm category), it balances reach and stiffness, reducing deflection during routine checks on larger fixtures, housings and assembly components. The matt-chrome graduated scale resists glare and wear, so legibility and long-term traceability of marks are preserved in daily use. Mechanical Vernier accuracy with fine, controllable positioning The analogue Vernier arrangement combines a metric nonius of 1/20 mm (equivalent to 0.05 mm resolution) with an inch scale reading via 1/128", enabling cross-referenced measurements without electronics. Conformity to DIN 862 is specified up to the shorter jaw lengths; above 250 mm the instrument is supplied according to the manufacturer's workshop standard, which maintains practical tolerance for heavy-duty use. The integrated fine-adjustment thumb screw simplifies precise jaw alignment, so single-handed, repeatable readings are faster and less error-prone. Engineered for everyday workshop workflows Surfaces are finished for resilience: the measuring faces are hardened to preserve accuracy under frequent contact, while the matt-chrome scale reduces reflections in bright workshop lighting. The 100 mm jaw length provides a good balance between bite depth and access for stepped measurements or profiles. As a sturdy analogue gauge, this caliper is low-maintenance and readily serviceable, making it a pragmatic choice for production inspection, toolroom checks or quality control stations. Backed by Metav’s quality filter, the instrument meets the expectations of industrial users seeking dependable workshop tools. For application guidance, stock checks or to source the Metav IndustryLine Workshop Caliper M201.324 for your workshop, contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or call +49 2822 7131930 for personalised advice and availability. Technical Data Article number: M201.324 GTIN: 4054469101453 Manufacturer: Metav IndustryLine Facts Measuring range: 0–400 mm Jaw length: 100 mm Vernier / nonius: 1/20 mm (0.05 mm) Vernier (inch): 1/128" Special features Material: hardened stainless steel with matt-chrome scale Construction: monoblock design Fine-adjustment thumb screw Conforms to DIN 862 up to designated jaw lengths; above 250 mm supplied to factory standard FAQ What measuring range does this caliper cover? The Workshop Caliper M201.324 covers a measuring range of 0–400 mm, placing it in the medium-range category suitable for larger workshop assemblies. What resolution and reading method does the instrument offer? Readings are mechanical via a Vernier: the metric nonius provides 0.05 mm resolution (1/20 mm) and an inch scale is available via a 1/128" vernier. Is the caliper corrosion-resistant and robust for shop use? Yes; the caliper is manufactured from hardened stainless steel with a matt-chrome graduated scale to improve durability and reduce surface glare during repeated use. Does the instrument comply with recognised standards? The caliper is specified against DIN 862 for applicable jaw lengths; for sizes above the stated limit it is supplied according to the manufacturer's workshop standard, ensuring practical suitability for heavy-duty tasks. What feature assists with precise jaw alignment? A fine-adjustment thumb screw is integrated to allow controlled, repeatable jaw positioning for accurate single-handed measurements. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
400mm Workshop Caliper With 150mm Depth Probe, 0.05mm Resolution, Fine Adjustment, Monoblock, Stainless Steel, Supplied In Case - Metav IndustryLine
Take advantage of the combination of monoblock stability, fine adjustment and a clear analogue scale for reliable workshop measurement; order directly via Metav Werkzeuge or consult our specialists for specification advice. Workshop Caliper M201.334.2 – 400 mm analogue caliper with fine adjustment (Metav IndustryLine) The Workshop Caliper M201.334.2 is an analogue, monoblock stainless-steel caliper designed for medium-range workshop measurement tasks, offering precise external, internal and step measurement with fine adjustment. Monoblock stainless-steel construction Fine-adjustment for precise positioning 400 mm measuring range with 150 mm jaws Matt-chromed scale for clear reading Built for repeatable shop-floor accuracy The caliper is engineered as a monoblock instrument from hardened stainless steel, giving a stable measuring beam that resists torsion and wear in daily workshop use. The analogue nonius provides a reading step of 0.05 mm, matching common industrial tolerance bands for mechanical workshops; this makes the tool suitable for general quality control and setup tasks where rapid, robust checks are required. The integrated fine adjustment mechanism enables controlled closing of the jaws for reproducible contact, reducing reading scatter when comparing multiple components. Medium-range reach without compromising stiffness Classified as medium range (measuring range up to 300–500 mm), this caliper balances reach and rigidity: the 400 mm span covers larger fixtures and housings while the 150 mm jaws retain sufficient profile stiffness for accurate measurements across the full range. This combination is particularly useful for jigs, mould components and medium-sized castings where single-handed guidance and reliable repeatability are valued. The construction reduces elastic deflection and supports consistent measurement procedures across workshop batches. Clear analogue operation and durable scale Reading is supported by a clear matt-chromed scale and a dual nonius: 1/128" on the top and 1/20 mm on the bottom, the latter corresponding to the 0.05 mm division. The simple, mechanical operation requires no batteries and is straightforward to integrate into existing inspection routines; training time is minimal for staff familiar with conventional calipers. The instrument complies with DIN 862 requirements for the applicable jaw length, underlining its suitability for standardised workshop measurement protocols. For a technical consultation on the Metav IndustryLine caliper and to confirm fit for specific measuring tasks, contact Metav Werkzeuge for personalised advice and procurement support. Technical data Article number: M201.334.2 GTIN: 4054469101712 ECLASS: 21170344 Tariff number: 90173000 Numbers / Core technical data Measuring range: 0–400 mm Jaw length: 150 mm Resolution (nonius): 0.05 mm Analogue nonius: 1/128" (top) and 1/20 mm (bottom) Conformity reference: DIN 862 (jaw length ≤ 200 mm) Designs / Special features Monoblock construction Hardened stainless steel with matt-chromed scale Fine-adjustment mechanism Pointed jaws for extended access Analogue operation, no power required FAQ How precise is the measurement on this caliper? The caliper delivers a reading step of 0.05 mm via its analogue nonius; this aligns with the industrial standard for mechanical workshop calipers and supports routine quality checks. Can the caliper be used for internal and step measurements? Yes, the instrument is designed for external, internal and step measuring tasks and the pointed jaws assist access to narrow or recessed features. Is the instrument compliant with recognised norms? The caliper meets the DIN 862 requirements applicable to its jaw length and workshop use, providing a familiar reference for inspection and documentation. What advantages does the monoblock design provide? Monoblock construction increases rigidity and reduces deformation under load, improving repeatability when measuring larger components across the 400 mm span. Does the caliper require batteries or electronics? No; this is an analogue caliper with mechanical nonius reading and a fine-adjustment screw, designed for maintenance-light workshop use. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
400mm Workshop Caliper With Pointed Jaws 0.05mm Resolution Fine Adjustment Monoblock In Stainless Steel, Delivered In Case - Metav IndustryLine
Combining a hardened stainless-steel frame, a 0–400 mm measuring range and a precise fine-adjustment control, this workshop caliper delivers steady, repeatable results on medium-sized components. Order the device directly via Metav Werkzeuge or contact our advisers for application-specific guidance. M201.334.3 Workshop caliper — 0–400 mm, hardened stainless steel, analogue with fine adjustment The M201.334.3 is a robust workshop caliper intended for reliable external, internal and step measurements on medium-format components, featuring pointed jaws and a monoblock construction for enhanced stability. Hardened stainless-steel frame 0–400 mm measuring range Fine-adjustment thumbwheel Monoblock construction for rigidity Pointed jaws for narrow features Consistent rigidity for repeatable results The monoblock construction and hardened stainless-steel beam reduce flex and thermal distortion, ensuring that measurements stay consistent over repeated cycles. With a 200 mm jaw length and a measuring span of 0–400 mm, the instrument falls into the medium class for calipers — a practical compromise between reach and stiffness for machine‑shop and fixture work. Compliance with DIN 862 is maintained for the jaw geometry at the specified jaw length, supporting standardised measurement practice on common workshop parts. Precise control and clear analogue readout Equipped with a dual nonius — 1/128" on the upper scale and 1/20 mm on the lower scale — the caliper offers traditional analogue reading suitable for metric and imperial workflows. The fine-adjustment thumbwheel enables cautious approach and micro‑positioning of the jaws, reducing overshoot when handling delicate features. For many industrial applications the metric nonius (1/20 mm → 0.05 mm) provides the expected mechanical resolution for everyday quality control while remaining robust under workshop conditions. Designed for workshop versatility and serviceability Pointed measuring jaws provide access to narrow grooves and small bore edges that standard tips cannot reach, widening the instrument’s practical use on assemblies and small components. The matt‑chromed scale improves legibility by reducing glare, while the stainless construction is hardened for wear resistance and longevity in a working environment. The caliper's functional layout supports quick, confident measurement tasks without the need for electronic systems, making it a durable choice for production floors and maintenance benches. Secure the M201.334.3 from Metav Werkzeuge for dependable medium-range measuring capability; contact Metav Werkzeuge for advice on integration into existing inspection workflows. Technical data Article number: M201.334.3 GTIN: 4054469101729 Brand: Metav IndustryLine Facts Measuring range: 0–400 mm Jaw length: 200 mm Graduation: 1/20 mm (0.05 mm) and 1/128" Construction: Monoblock Special features Material: hardened stainless steel, matt‑chromed scale Fine adjustment: yes Analogue nonius: dual scale Pointed jaws included Standard: DIN 862 (applicable at jaw length 200 mm) FAQ What measuring tasks is this caliper best suited to? The M201.334.3 workshop caliper is optimised for medium‑range tasks where a balance of reach and stiffness is required, such as measuring housings, fixtures and mid‑sized machined parts. How precise is the analogue graduation on the caliper? The caliper uses a metric nonius at 1/20 mm (equivalent to 0.05 mm) together with a 1/128" imperial scale, providing the mechanical resolution typical for workshop analogue instruments. Does the caliper meet recognised standards? Yes, the jaw geometry for the stated jaw length conforms to DIN 862, ensuring standardised form and dimensional properties for routine inspection. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
400mm Workshop Caliper With Pointed Jaws Fine Adjustment Monoblock Hardened Stainless Steel 0.05mm Resolution - Metav IndustryLine
The combination of hardened stainless steel construction, a 400 mm measuring range and precise fine adjustment ensures reproducible workshop measurements for medium‑sized components; benefit from robust rigidity and clear scale contrast for faster inspection cycles. Order directly via Metav Werkzeuge or consult our specialists for application advice. Workshop Caliper M201.334 – 400 mm, hardened stainless steel, fine adjustment (Metav IndustryLine) Workshop Caliper M201.334 is a medium‑range analogue caliper designed for accurate external, internal and step measurements in machine shops and maintenance environments. Hardened stainless steel construction 400 mm measuring range (medium class) Precise fine adjustment for repeatable settings Monoblock frame for increased rigidity Matt‑chrome scale for clear reading Precision where reach meets rigidity This caliper is built for repeatable dimensional checks across larger workpieces: the 400 mm range places it in the medium‑range category, offering a practical balance between reach and stiffness for jig, fixture and housing measurements. The analogue vernier provides a 0.05 mm reading step, enabling routine workshop tolerances to be checked reliably while the fine adjustment wheel allows controlled contact force and precise positioning. This reduces rework and speeds up inspection loops. Durable construction for everyday workshop use Manufactured from hardened stainless steel with a matt‑chrome scale, the instrument resists corrosion and wear while maintaining legibility under bright workshop lighting. The monoblock design increases profile stiffness and preserves zero‑setting over time, which supports consistent results during repetitive measuring tasks. Pointed jaw tips improve access to grooves and narrow features without compromising the overall jaw stability. Readable vernier and compliant design The vernier arrangement offers imperial and metric references—1/128" on the upper scale and 1/20 mm on the lower—so conversions and cross‑checks are straightforward on the shop floor. Normative notes are observed: jaw length guidelines follow DIN 862 for shorter snabs, with factory standards applied for larger lengths as indicated in the product specification. Being an analogue instrument, it requires no power supply and is immediately ready for direct measurement work. Practical handling and application benefits Ergonomics and handling are tuned for frequent use: the fine adjustment assists in achieving repeatable contact without sudden jumps, while the robust frame tolerates daily workshop handling. The caliper is ideal for machinists, toolmakers and service technicians needing dependable medium‑range checks on shafts, housings and assembled components. For specialised measuring tasks, Metav’s technical advisors can help match the instrument to a specific quality workflow. For reliable medium‑range measurements, choose the Metav IndustryLine caliper M201.334—contact Metav Werkzeuge in Emmerich for tailored advice and order assistance at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data Article number: M201.334 GTIN: 4054469101699 EClass: 21170344 Customs tariff number: 90173000 Measurements & accuracy Measuring range: 0–400 mm Resolution/reading step: 0.05 mm Vernier: 1/128" (top) and 1/20 mm (bottom) Jaw length: 100 mm Standard: DIN 862 (jaw length rules), factory norm for larger lengths Materials & features Material: hardened stainless steel, matt‑chrome scale Monoblock frame construction Fine adjustment (feineinstellung) Analogue vernier caliper (nonius) Pointed jaw tips (mit Spitzen) Designed for workshop and machine‑shop use FAQ What measuring range does the caliper cover? The caliper covers a measuring range of 0–400 mm, classifying it as a medium‑range instrument suitable for many machine‑shop tasks; refer to the specification for jaw length and handling notes. What resolution and reading system are provided? The instrument gives a 0.05 mm vernier reading; the dual vernier scales (1/128" and 1/20 mm) allow metric and imperial cross‑checks on the workshop floor. Is the caliper ready to use out of the box for workshop checks? Yes, the analogue caliper is delivered ready for use; the fine adjustment enables controlled contact and quick repeatability for routine inspection operations. Which materials and environments is the caliper suited to? Constructed from hardened stainless steel with a matt‑chrome scale, the caliper tolerates regular workshop exposure and is suitable for general metalwork and maintenance measurement tasks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Precision calipers for accurate, repeatable measurement
Calipers are the indispensable length-measuring tools for industry and workshop environments, enabling fast and exact external, internal, depth and step measurements. Our professional range of precision calipers, including vernier calipers, dial calipers and digital calipers, combines mechanical robustness with modern data handling to support consistent quality assurance.
How these calipers work and where they help most
Analogue vernier calipers deliver reliable, autarkic operation via the vernier scale and are best suited to heavy-duty workshop use where durability matters. Digital calipers provide a contrast-rich display, minimise reading errors and speed up inspection routines through functions such as zero setting and data output. At the high end, touchscreen calipers from Microtech feature an integrated microcomputer, colour touch display, built-in error-tolerance checks and wireless data transmission, making them suited for Industry 4.0 workflows. Workshop calipers with extended measuring ranges offer optional fine adjustment and rounded tips for interior measurements, while in-built calipers can be mounted directly to machines or test rigs to monitor travel. Specialty calipers cover tasks such as deep grooves, pipe wall thickness, brake disc inspection, three-point measurements and bespoke geometries.
Tangible benefits that improve production performance
- Faster throughput: digital calipers with data output reduce manual entry and accelerate quality checks.
- Higher repeatability: robust mechanical design and error-tolerance controls raise measurement consistency.
- Flexible integration: wireless data transmission and touchscreen operation simplify digitisation to existing systems.
- Reduced downtime: workshop and in-built variants with fine adjustment minimise rework and set-up time.
- Application coverage: specialty calipers adapt to complex geometries, from three-point checks to deep-niche measurements.
Microtech and metav — quality and supply you can rely on
For high-end, touchscreen-equipped instruments, Microtech represents the technological benchmark thanks to its integrated controls and wireless capabilities. As a precision partner, Metav complements this with decades of experience and a comprehensive offering: more than 250,000 products, a European quality filter in Emmerich and the trust of over 48,000 customers, making Metav a sensible central source for calipers and measuring equipment.
Quick summary
Calipers — from analogue vernier to touchscreen digital — deliver the measurement accuracy and data connectivity modern production demands while reducing inspection time and improving repeatability.
FAQ
What are the main differences between analogue and digital calipers?
Analogue vernier calipers rely on a vernier scale and are prized for ruggedness and independence from power, whereas digital calipers provide a contrast display, zero setting and data output to eliminate readout errors and speed up quality processes.
Can calipers be integrated into a digital inspection workflow?
Yes. Many digital calipers and touchscreen models support data output and wireless data transmission, enabling direct transfer of measurements into quality-management systems or statistical process control.
Which caliper type is best for large measuring ranges in a workshop?
Workshop calipers with extended measuring ranges and optional fine adjustment are designed for large components; they maintain mechanical stability and are available with rounded interior jaws for safer internal measurements.
Are there calipers for specialised geometries like deep grooves or brake discs?
Specialty calipers are explicitly engineered for such tasks. They feature tailored measuring faces for deep-niche measurements, pipe wall thicknesses, brake-disc checks and three-point or flexible geometries.
How do touchscreen calipers from Microtech improve quality control?
Microtech touchscreen calipers combine an integrated microcomputer, colour touch display and built-in error-tolerance checks with wireless data transmission, allowing immediate verification, reduced human error and seamless digitisation in line with Industry 4.0 practices.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com