Precision calipers for reliable industrial measurement
Precision calipers and their variants provide fast, repeatable outside, inside, depth and step measurements to ensure component conformity and process control on the shopfloor, combining mechanical robustness with digital data handling for traceable results. Designed for use in industrial quality assurance and manufacturing, these calipers serve applications from rough workshop environments to precision inspection, with options such as analogue vernier calipers for durable, battery‑free operation and digital calipers offering clear displays and data output to speed up quality workflows. Specialist formats, including workshop calipers with extended ranges and built‑in mounting calipers for machine or fixture monitoring, extend capability to long strokes and embedded measurement tasks, while bespoke models handle deep grooves, pipe wall thicknesses and three‑point or other complex geometries. The range emphasises highest accuracy and process integration, featuring high‑end touchscreen models with integrated microcomputers, wireless data transfer and Industry 4.0 compatibility to modernise measurement and quality data capture.
55° Thread Measurement Adaptor, BSW 55° - Microtech Metrology
Take advantage of a purpose-built accessory that matches the 55° Whitworth profile and the 5 mm pitch for reliable thread verification; the result is fewer rework cycles and faster batch acceptance. Order the matching item directly via Metav Werkzeuge or consult our specialists for integration advice. Measuring attachment — 55° BSW thread profile, 5 mm pitch (Microtech Metrology) The Measuring attachment is a precision accessory for verifying 55° Whitworth (BSW) threads in metrology workflows and inspection stations 55° profile suited to BSW thread measurement Compatible with 5 mm thread pitch Precision accessory for metrology instruments Manufacturer Microtech Metrology Accurate thread-profile verification to reduce rework The accessory provides a defined 55° profile that matches the geometry used for Whitworth (BSW) threads, allowing straightforward verification of flank form and basic pitch conformity. By using a dedicated profile head the inspection task becomes repeatable: a consistent contact geometry lowers the risk of false rejections and shortens decision times in the control loop. The measurable 5 mm pitch is supported directly by the geometry, which helps to identify mismatches between component and specification at an early stage. Designed for integration into inspection routines This accessory has been produced by Microtech Metrology as a metrology spare part and is intended to integrate with instrument-based inspection setups. The defined profile simplifies comparison against thread standards during incoming inspection or in-process checks, enabling faster throughput without sacrificing traceability. Where production flow demands rapid checks, the attachment reduces the need for time-consuming manual gauging while keeping the inspection process comparable and documentable. Support for quality systems and supplier confidence As a component within a calibrated inspection chain, the measuring head contributes to reproducible results and clearer pass/fail decisions. When combined with sound measurement procedures and consistent fixturing, it supports adherence to internal quality plans and external supply requirements. Metav’s positioning as a precision partner means the accessory is supplied via a distributor with broad industry experience and a large catalogue, which helps to streamline procurement and ensures availability for routine operations. Secure the Microtech Metrology 55° BSW measuring attachment through Metav Werkzeuge for reliable thread verification — contact the Emmerich team for technical matching and supply at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 141377205T GTIN: 4061905458781 Manufacturer: Microtech Metrology Facts Profile angle: 55° Thread pitch: 5 mm Category: Metrology accessory Special features Intended for BSW (Whitworth) thread measurement Accessory for metrology instruments SKU: 141377205T FAQ Which thread form does this attachment inspect? The attachment inspects Whitworth (BSW) threads using a defined 55° profile suitable for the specified application and pitch. Is the accessory suitable for the 5 mm pitch? Yes — the geometry of the measuring head corresponds to a 5 mm thread pitch and is intended for verification tasks that reference that pitch. Can this part be used with other metrology systems? The accessory is supplied by Microtech Metrology and is designed as a precision spare for metrology instruments; compatibility depends on the receiving instrument’s accessory interface and fixturing. Does the head replace traditional go/no-go gauges in production? It supplements standard gauging by enabling instrument-based profile checks; when used within a controlled measurement procedure it reduces manual handling and supports faster quality decisions. How does the 55° Whitworth profile differ from metric threads? Whitworth threads use a 55° flank angle, whereas ISO metric threads use a 60° flank angle; this attachment is therefore specific to BSW geometry and not suitable as a substitute for metric thread checks. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
55° Thread Measurement Attachment BSF 55° Angle For Thread Gauging - Microtech Metrology
Take advantage of the combination of accurate flank-angle verification and compact metrology integration for reliable thread inspection; the 55° flank geometry and compatibility with a 6 mm pitch support reproducible checks in production and QA. Order the measuring attachment directly via Metav Werkzeuge or ask the consultants for application advice. Measuring Attachment — Thread Measurement Accessory (55° flank angle, 6 mm pitch) by Microtech Metrology The Measuring Attachment is a compact inspection accessory intended for precise verification of thread profiles with a 55° flank angle, well suited to measuring tasks that require a defined 6 mm pitch. Thread measurement at 55° flank angle Suitable for 6 mm thread pitch Designed for precision metrology instruments Manufactured by Microtech Metrology Accurate verification where flank form matters This attachment performs targeted thread measurement using a defined 55° flank geometry, which is essential when the profile angle determines fit and function. By referencing the flank angle rather than relying on visual gauges, the accessory provides a repeatable datum for comparative checks, reducing subjective interpretation. The clear specification of a 6 mm pitch enables direct assessment of lead and form; in practice, this translates into fewer false rejects and faster decision-making on the shop floor. Fast integration into inspection routines Built as an accessory for metrology setups, the unit is intended for quick mounting and alignment in routine checks, shortening setup times and improving throughput. The measuring head concept keeps handling steps minimal and supports consistent positioning across batches, so inspection cycles become more predictable and efficient. For production-centric environments this means a clearer pass/fail outcome per component and fewer process interruptions. Reliability tailored to workshop conditions Produced under the Microtech Metrology label, the accessory is engineered with industrial use in mind; the construction and tolerances reflect expectations for metrology tooling. Its role as an inspection adaptor ensures that profile checks are repeatable under typical workshop conditions, which helps avoid rework and downstream assembly issues. The focus on precision and robustness supports sustained measurement performance across repeated cycles. Practical benefits for quality assurance Implementing this accessory into a measurement routine provides a measurable contribution to quality assurance: reduced inspection variability and a tighter control of thread geometry mean fewer warranty claims and improved component interchangeability. Used as part of a documented inspection procedure, the measuring head helps demonstrate that thread geometry was verified against a defined flank angle and pitch, strengthening audit evidence and supplier verification processes. Contact Metav Werkzeuge for tailored advice on integrating this Microtech Metrology thread measurement accessory into existing inspection workflows—call +49 2822 7131930 or email info@metav-werkzeuge.com to discuss suitability and delivery options Technical Data Article number: 141377216T GTIN: 4061905458859 Manufacturer: Microtech Metrology Category: Accessory Intended use: Thread inspection Angle: 55° Thread pitch: 6 mm Facts Angle: 55° Pitch: 6 mm SKU: 141377216T GTIN: 4061905458859 Special features Accessory for thread measurement Designed for metrology inspection setups Compact measuring head format Brand: Microtech Metrology FAQ What is the primary use of this accessory? The measuring attachment is intended for thread measurement where a defined 55° flank angle and a 6 mm pitch must be verified; it serves as an inspection adaptor for comparative checks. Which thread pitch does the accessory support? The unit is specified for a 6 mm pitch and for profile verification based on a 55° flank geometry, allowing direct checks of pitch and flank conformity. Which instruments can accept this attachment? The accessory is designed for use in standard metrology inspection setups and with compatible measuring heads and fixtures commonly used in workshop and QA environments. How does this attachment improve inspection reliability? By providing a defined flank-angle reference and consistent positioning, the accessory reduces subjective measurement error, improves repeatability and streamlines pass/fail decisions during quality control. How can the product be identified in procurement and inventory systems? Identification: SKU 141377216T, GTIN 4061905458859, Manufacturer Microtech Metrology Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
55° Thread Measurement Attachment BSW 4–9 TPI Set, 7 Pieces - Microtech Metrology
Take advantage of the precise 55° thread profile, the coverage of 4–9 TPI and the practical set format to speed up in‑process checks and reduce rework. Order the accessory directly via Metav Werkzeuge or consult the Metav specialists for application advice. Measuring Attachment BSW 55° — Thread measurement accessory with 4–9 TPI, set of 7 (Microtech Metrology) The Measuring Attachment BSW 55° is a precision accessory for thread inspection, designed to verify British Standard Whitworth (BSW) profiles across the common 4–9 TPI range in workshop and inspection routines 55° BSW thread profile Covers 4–9 TPI range Supplied as a set of 7 inserts Faster, standard-compliant thread checks that reduce downtime The 55° thread profile built into this insert matches the Whitworth geometry commonly used on imperial fasteners; this ensures measurements reflect the real mating profile rather than an approximation. With a 4–9 TPI range included in the set, the insert bundle covers the most frequently encountered coarse and medium BSW pitches, which streamlines incoming inspection and first‑off checks. By using a dedicated thread measurement insert instead of improvised gauges, the inspection routine becomes more repeatable and less prone to subjective interpretation, lowering the risk of scrap and unscheduled rework. Practical set design for quick exchange and consistent results Delivered as a set of 7, the package supplies a compact selection of inserts that can be rotated or replaced as wear occurs, extending effective service life without complex maintenance. The set format supports efficient shop‑floor workflows: thread checks can be completed faster at the bench or on a measuring instrument, and repeatability is improved because each insert conforms to the same 55° profile. Where traceable records are required, the defined set composition simplifies documentation and parts control in quality management processes. Seamless fit with metrology routines and production quality control As an accessory intended for metrology use, the insert set integrates with standard inspection stations and thread‑measuring fixtures, helping to maintain throughput during batch sampling and final inspection. The clear definition of thread profile and pitch range assists technicians in selecting the correct check quickly, which in turn supports consistent process capability and fewer line stops. For procurement and inventory, the SKU and GTIN support straightforward traceability back to the supplier and batch information. For reliable BSW thread inspection choose Microtech Metrology's Measuring Attachment BSW 55°—order via Metav Werkzeuge or contact their consultants at Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich; phone +49 2822 7131930; info@metav-werkzeuge.com for specification matching and availability Technical data SKU: 141377200T GTIN: 4061905458811 Manufacturer: Microtech Metrology Facts Angle: 55° TPI range: 4–9 TPI Pieces per set: 7 Special features BSW thread profile for Whitworth checks Accessory for thread measurement instruments Supplied as a set of inserts Category: accessory for metrology equipment FAQ What thread pitches are included with the insert set? The insert set covers the 4–9 TPI range, allowing verification of the most common BSW pitches with the Measuring Attachment BSW 55° from Microtech Metrology. Is the insert suitable for Whitworth (BSW) thread forms? Yes, the insert is manufactured to the 55° Whitworth geometry and is intended specifically for BSW thread measurement applications using the measuring attachment. How does the set help in a production quality process? Supplied as a set of 7, the Measuring Attachment BSW 55° allows quick exchange of worn inserts and consistent checks, supporting repeatable inspection results and smoother production sampling. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
55° Thread Measurement Attachment BSW 55° - Microtech Metrology
Take advantage of the combination of dependable thread profiling, a 55° flank angle and a clear pitch value of 9 to standardise inspection routines and reduce rework. Order the accessory directly via Metav Werkzeuge or consult the Metav team for integration advice. Thread measuring attachment BSW 55° – 55° thread profile (Microtech Metrology) The Thread measuring attachment BSW 55° is a precision accessory for inspecting British Standard Whitworth threads with a 55° flank angle, designed for workshop and inspection use 55° flank angle for BSW thread profiles Designed for precise thread assessment Compatible with standard measuring instruments Supplied by Microtech Metrology, reliable Accuracy tailored to BSW inspection The accessory was developed specifically to assess BSW thread geometry by referencing the characteristic 55° flank. Fitting the correct profile ensures that pitch and flank form are checked against the expected geometry rather than inferred from general gauges. This results in more consistent pass/fail outcomes during production checks and shorter calibration cycles for inspection equipment. The clearly defined pitch value of 9 is recorded in the specification, supporting traceable documentation and efficient part classification. Faster metrology workflows through clear compatibility Designed as an add-on for existing thread inspection setups, the attachment integrates with common metrology stands and comparators, enabling quicker sampling and fewer instrument changes. The straightforward profile fit reduces setup time between different thread types and simplifies measurement sequences, which increases throughput in workshop inspection. The practical benefit is reduced process interruptions and a simpler route from measurement to decision, helping teams keep projects on schedule. Built for repeatable workshop performance Constructed to withstand regular use in shop-floor environments, the accessory prioritises dependable contact geometry and handling ergonomics. That durability supports repeatability across multiple checks and operators, so measurement scatter is reduced even in routine inspections. The result is a reliable tool for quality control traces in manufacturing or refurbishment contexts, where reproducible thread assessment is essential for assembly integrity. For purchasing and integrating the Microtech thread measuring attachment, contact Metav Werkzeuge in Emmerich on +49 2822 7131930 or info@metav-werkzeuge.com to discuss delivery options and compatibility with existing inspection equipment Technical Data Article number (SKU): 141377201T GTIN: 4061905458361 Manufacturer: Microtech Metrology Specifications Angle: 55° Pitch: 9 Special features Intended for BSW 55° thread measurement Accessory for thread gauges and measuring instruments Product images and detail files available FAQ What thread form does the attachment check? The thread measuring attachment checks the BSW thread form with a 55° flank angle and is specified for assessment of that profile. Which manufacturer produces this accessory? This attachment is produced by Microtech Metrology and is listed under SKU 141377201T. Is the pitch indicated in the specification? Yes, the specification records a pitch value of 9 for reference when classifying or documenting threads. Can the accessory be used with standard measuring stands? The accessory is designed for compatibility with common measuring instruments and stands used in workshop inspection. What information is provided for traceability? The product listing includes GTIN 4061905458361 and the SKU 141377201T for traceability in procurement and quality records. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
55° Thread Measurement Attachment BSW, For 55° Thread Form - Microtech Metrology
Take advantage of the combination of precise 55° flank geometry, compatibility with standard BSW pitches (4.5 mm) and a compact accessory form that keeps thread checks reproducible and efficient. Order the measuring attachment directly via Metav Werkzeuge or ask our consultants if needed. Measuring attachment — BSW 55° thread measurement accessory by Microtech Metrology Measuring attachment for rapid, repeatable inspection of BSW threads using a 55° flank angle; intended as an accessory for metrology instruments and gauges. Precision 55° flank geometry for BSW threads Compatible with 4.5 mm thread pitch Accessory for metrology instruments Reliable geometry for reproducible thread checks The accessory is engineered around the 55° flank angle required for BSW (British Standard Whitworth) threads, ensuring that contact occurs at the correct flank geometry and that measurement results are consistent across repeated checks. With a defined thread pitch 4.5 mm, the attachment aligns interrogation points so that a measurement system records the effective profile rather than artefacts from misaligned contact. This technical design reduces setup iterations and contributes to faster cycle times in incoming inspection and quality checks. The result is a measurable increase in repeatability and a lower likelihood of false rejects during batch verification. Seamless integration with metrology equipment Designed as an accessory for dial gauges, digital comparators or bench measuring fixtures, the attachment fits into existing inspection workflows without extensive modification. The compact interface and secure mounting promote stable contact during measurement sequences, which is particularly important when integrating with height gauges or bench comparators used in calibration labs and production testing. By providing a dedicated contact geometry for BSW threads, the component removes the need for improvised adapters and helps to standardise procedures for thread verification in the workshop and laboratory environment. This integration capability supports efficient quality assurance and shortens setup times for repeat inspections. Practical advantages for workshop and laboratory use As a specialised metrology accessory, the unit brings clear practical benefits: consistent contact geometry lowers operator influence, a repeatable pitch reference simplifies pass/fail decisions, and the accessory’s form factor keeps handling straightforward during routine checks. The part is best applied where BSW thread forms are present on components that require fast verification during assembly or final inspection. The compromise between focused functionality and simple handling is aimed at service departments, toolrooms and inspection benches that demand dependable results with minimal overhead. Built as a precision accessory by Microtech Metrology, the attachment supports structured inspection routines and contributes to a traceable quality record when used as part of an established measurement process. For precise BSW thread verification trust Microtech Metrology accessories—contact Metav Werkzeuge for procurement and technical consultation via info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 141377206T GTIN: 4061905458798 Manufacturer: Microtech Metrology Facts Angle: 55° Thread pitch: 4.5 mm Category: Accessory for measuring instruments Special features Designed for BSW 55° thread measurement Intended as an accessory for metrology instruments and gauges Supplied as a precision measuring attachment for thread inspection FAQ What thread form is this attachment designed for? This attachment is designed specifically for BSW (British Standard Whitworth) threads using a 55° flank angle, providing the correct contact geometry for reliable checks. Which thread pitch does the accessory match? The accessory aligns to a thread pitch of 4.5 mm, matching common BSW specifications and enabling consistent profile interrogation. Can the accessory be used with digital comparators and height gauges? Yes. The attachment is intended as an accessory for metrology instruments and can be integrated with comparators and gauges used in inspection workflows. Who manufactures this measuring attachment? The measuring attachment is produced by Microtech Metrology and supplied as a precision accessory for thread inspection. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
55° Thread Measurement Attachment For 55° Thread Angle - Microtech Metrology
The combination of a true 55° profile and suitability for BSF/Whitworth threads ensures reliable verification of classic thread forms while reducing rework and inspection time; the attachment is matched to a 4.5 mm pitch for targeted measurements. Order the measuring attachment directly via Metav Werkzeuge or ask our consultants if needed. Measuring Attachment BSF 55° – Thread measuring attachment, 55° profile (Microtech Metrology) The Measuring Attachment BSF 55° is a precision accessory for comparative and profile-based thread inspection, designed to verify 55° BSF/Whitworth thread forms and intended for use with precision comparators and gauges 55° profile for BSF/Whitworth thread measurement Designed for 4.5 mm thread pitch verification Compatible with Microtech Metrology gauges Reliable profile control for classical thread standards The attachment provides a 55° flank geometry that matches the traditional BSF/Whitworth thread form, allowing straightforward verification of profile conformity. By offering a defined contact geometry for the flank faces, the device reduces interpretative errors during visual or comparator-assisted inspection. The controlled contact and dedicated geometry convert profile assessment into a repeatable, comparable measurement, which supports faster decisions in incoming inspection and in-process checks while maintaining documented traceability. Smooth integration with precision comparators and gauges Manufactured to interface with standard comparator fixtures, the accessory ensures simple mechanical compatibility with established measurement rigs from Microtech Metrology and similar systems. The matching to a 4.5 mm pitch makes it suitable for the specific BSF sizes where that pitch applies, avoiding over-generalisation and ensuring that the tool is used where it delivers best accuracy. The design prioritises robust seating and repeatable orientation so that each measurement cycle begins from the same reference, enabling consistent results across shifts and operators. Practical advantages for workshop and quality control applications With a focus on measurement efficiency and trustworthy verification, this thread measuring solution helps to reduce non‑conforming parts progressing through production. The defined profile contact simplifies operator training and shortens inspection times, which benefits both small toolrooms and larger quality departments. Where documentation is required, the attachment supports clear pass/fail decisions and can be combined with comparator readings for recorded evidence. The result is improved process stability and fewer returns or reworks due to thread-profile deviations. Contact Metav Werkzeuge to discuss specification matching or to order the Microtech Metrology measuring attachment with 55° profile for precise BSF thread verification Technical data Article number: 141377218T GTIN: 4061905458873 Brand: Microtech Metrology Numbers / Core technical data Angle: 55° Pitch: 4.5 mm SKU: 141377218T Special features / Applications Application: thread profile measurement (BSF/Whitworth) Function: profile verification for comparator-based inspection Category: accessory for measuring devices FAQ What thread form does this attachment check? The measuring attachment checks the BSF/Whitworth thread form by providing a matched 55° profile for comparator or gauge verification. Which thread pitch is the attachment intended for? This accessory is configured for a 4.5 mm thread pitch, making it suitable for BSF sizes that use that pitch specification. Is the attachment compatible with other gauge systems? The attachment is designed for mechanical compatibility with precision comparators and similar gauge fixtures and is produced by Microtech Metrology for reliable interfacing. Can this attachment be used for production testing and incoming inspection? Yes; the attachment supports both incoming inspection and in‑process profile checks to speed decision making and reduce rework. Which model or article number should be referenced when ordering? Reference article number 141377218T and the Microtech Metrology measuring attachment with 55° profile when enquiring or ordering. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
55° Thread Measurement Attachment For BSF Threads - Microtech Metrology
Take advantage of a compact, purpose-built measuring attachment that delivers precision for thread inspection; the 55° flank angle and defined pitch 5 mm make it a practical accessory to speed up checks and reduce rework. Order the measuring attachment directly via Metav Werkzeuge or consult our specialists for application advice. Measuring attachment BSF 55° — Thread-measuring attachment, 55° angle (Microtech Metrology) The Measuring attachment BSF 55° is a precision accessory for thread inspection, engineered for use with measuring instruments and gauges to assess 55° thread profiles and a nominal pitch of 5 mm. Precision 55° angle for ISO threads Designed for thread measurement applications Accessory compatible with Microtech Metrology devices Robust construction for repeatable readings Accurate flank geometry for reliable thread inspection The attachment provides a defined 55° flank geometry that aligns with common 55° thread profiles, enabling consistent contact with the flank during inspection. By fixing the angle and reference geometry, the component reduces operator-induced variation and supports more reliable pass/fail decisions during visual or tactile checks. This level of precision shortens inspection cycles and lowers the risk of rework caused by ambiguous readings, making the workflow measurably more efficient. Integration into existing metrology processes and improved throughput As an accessory intended for use with established measuring instruments, the head integrates into standard test setups without elaborate adjustments. Its purpose-built form facilitates quick mounting and repeatable positioning, so inspections can be carried out with stable reference points and repeatable readings. The result is an increase in throughput for batch checks and a reduction in cumulative measurement uncertainty, which benefits quality management and production planning by improving first-pass yield. Applications, suitability and assurance for workshop and lab use Suitable for quality control, workshops and metrology departments, this measuring head supports inspection of threaded components where a pitch of 5 mm and a 55° profile are present. The accessory concept is particularly useful where a dedicated thread-measuring head streamlines routine checks and reduces handling time compared with ad‑hoc methods. Combined with Metav’s European distribution and technical support, the solution delivers the reassurance of consistent availability and pragmatic expertise for professional users. For tailored advice or to secure the BSF 55° measuring attachment from Microtech Metrology, contact Metav Werkzeuge in Emmerich via info@metav-werkzeuge.com or +49 2822 7131930 for prompt, expert support Technical data Article number: 141377217T GTIN: 4061905458866 Manufacturer: Microtech Metrology Facts Angle: 55° Pitch: 5 mm Category: Accessory for measuring instruments Special features Intended use: Thread measurement (55° profile) Delivery form: Measuring attachment accessory Application context: Quality control and workshop inspection FAQ What thread profile is the attachment designed for? The attachment is designed for a 55° thread profile and is intended to support thread measurement tasks with that flank geometry. Can the measuring attachment be used with other brands of gauges? The head is supplied by Microtech Metrology as an accessory for measuring instruments; compatibility depends on the instrument interface and mounting provisions of the gauge used. Does the attachment specify a thread pitch? Yes, the accessory is specified with a pitch indication of 5 mm, suitable for components that use this nominal spacing. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
55° Thread Measurement Attachment For Screw Gauge, 55° Profile - Microtech Metrology
Take advantage of precise 55° profile fidelity, compatibility with 11 TPI threads and robust construction for dependable thread inspection; order the measuring attachment directly via Metav Werkzeuge or consult our specialists for tailored advice. Measuring attachment BSF 55° – Thread measuring accessory (Microtech Metrology) A measuring attachment BSF 55° for precise inspection of British Standard Fine threads and routine thread-control tasks on comparators and gauge fixtures BSF 55° thread profile compatibility Suitable for 11 TPI thread pitches Precision metrology accessory for comparators Faster, more reliable thread inspection in production This accessory speeds up inspection routines by providing a dedicated contact geometry for BSF profiles. Fitting a dedicated profile head reduces setup time and eliminates repeated manual alignment, which increases throughput in quality control. The unit’s geometry is designed to reproduce the 55° flank angle consistently, helping to keep measurement scatter low and make pass/fail decisions quicker. Its focus on repeatable contact conditions supports efficient sampling for batch inspection and reduces rework rates in production. Designed specifically for BSF 55° profiles and 11 TPI pitches Engineered to match the British Standard Fine profile, the attachment is tailored for threads with 11 TPI, ensuring the correct flank angle and pitch engagement during measurement. This reduces the risk of misinterpretation that can occur when generic probes are used. The technical adaptation for the 55° form means the accessory can be used as a reliable reference when checking thread form and lead, giving a precise mechanical interface between the workpiece and the measuring instrument. For workshops that inspect British-standard components, this translates into clear, comparable results across multiple parts and operators. Built for integration, traceability and workshop use The accessory is suitable for mounting on common comparator and gauge setups, offering straightforward mechanical integration so inspection lines remain productive. Its robust design supports repeated use in workshop environments while maintaining measurement integrity. Where traceability is required, the accessory can be recorded as part of an inspection setup, aiding process documentation and quality systems. Combining precision geometry with easy fitting improves operator confidence in routine checks and contributes to a steady workflow in both small repair shops and larger inspection departments. Contact Metav Werkzeuge today for specification support and reliable delivery from Emmerich — our specialists will advise on compatibility with existing comparators and gauge systems Technical Data Article number: 141377211T GTIN: 4061905458354 Brand: Microtech Metrology Facts Angle: 55° Pitch: 11 TPI Category: Accessories Special features For thread inspection of BSF 55° profiles Designed for use with comparators and measuring instruments Intended for routine workshop and metrology use FAQ What thread form does this attachment support? The attachment is made for the BSF 55° thread form and reproduces the correct flank angle for reliable inspections. Is this accessory compatible with 11 TPI threads? Yes, the measuring head is specified for 11 TPI pitches and engages the profile accordingly for accurate checks. Can the accessory be mounted on standard comparators? The accessory is designed for integration with common comparator and gauge fixtures used in workshop inspection setups. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
55° Thread Measurement Head Attachment BSW 55° - Microtech Metrology
Take advantage of a purpose-built accessory that combines the 55° thread flank geometry with a 7 mm nominal pitch to deliver consistent thread profile checks; order the measurement attachment directly via Metav Werkzeuge or consult our specialists for application support. Measurement attachment (BSW 55°) — thread measurement accessory by Microtech Metrology Measurement attachment for metrological thread inspection, designed to replicate the 55° Whitworth flank for reliable thread form checks in workshops and inspection benches. 55° Whitworth geometry for thread profiles Designed for 7 mm nominal pitch verification Precision probe for metrological inspection Precise thread-form matching for reliable results The accessory matches the 55° flank angle common to Whitworth-style threads and the 7 mm pitch indicated in the technical data, so the contact geometry corresponds to the standard form rather than approximating it. This direct correspondence reduces interpretation errors during profile checks and makes dimension comparisons more reliable. The result is faster, more objective decisions in production control and quality assurance where repeatability matters. Built to integrate into existing measurement routines As a metrology accessory, the unit is intended for simple integration with thread inspection workflows. Its compact design keeps handling time low and reduces fixturing adjustments, which streamlines throughput in workshop and laboratory environments. By aligning the probe geometry with the thread form, the device shortens inspection sequences and supports consistent logging of inspection outcomes for traceable quality records. Practical choice for workshop and laboratory use The accessory is suited to routine thread verification and batch inspection of components where Whitworth geometry is present. The clear specification of angle and nominal pitch helps planners select the correct probe for the task, avoiding misfits that can cause rework or false rejects. Sourcing the part from an experienced precision partner adds supply reliability and helps maintain a stable inspection capability on the shop floor. For precise Whitworth thread checks, request Microtech Metrology’s 55° thread measurement attachment via Metav Werkzeuge — our team in Emmerich can advise on suitability and deliver quickly; eMail: info@metav-werkzeuge.com • Tel: +49 2822 7131930 Technical data Article number: 141377203T GTIN: 4061905458620 Manufacturer: Microtech Metrology Facts Angle: 55° Nominal pitch: 7 mm Special features Category: Accessory (Zubehör) Application: thread measurement Product name: Measurement attachment FAQ What thread angle does the accessory check? The accessory checks a 55° flank angle, matching the Whitworth-style profile specified for this measurement attachment. Is the attachment suitable for a 7 mm pitch thread? Yes. The device is specified for a 7 mm nominal pitch, making it appropriate for thread forms that use this pitch. Can the accessory be used on standard metrology heads? The accessory is designed as a metrology attachment for thread inspection and is compatible with measurement workflows that accept accessory probes; confirm mounting interface with the measuring head before purchase. What is the item reference for ordering? Order reference: Microtech Metrology measurement attachment, SKU 141377203T, GTIN 4061905458620. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
55° Thread Measurement Head For Three-Point Thread Gauging - Microtech Metrology
Take advantage of the precise BSF 55° profile and defined 4 mm thread pitch to standardise thread checks and shorten inspection cycles; order the adapter directly via Metav Werkzeuge or consult the Metav specialists for integration advice. Measuring attachment — BSF 55° thread measurement adapter by Microtech Metrology (55° angle, 4 mm pitch) A Measuring attachment designed for BSF 55° thread inspection, serving as an accessory for precision measuring instruments and workshop metrology. BSF 55° geometry for accurate thread checks Suitable for 4 mm thread pitch measurements Compatible with Microtech Metrology measuring systems Accurate profile verification without guesswork The measuring head offers a dedicated BSF 55° contact geometry that converts a visual or manual check into a repeatable, measurable action. By matching the thread angle precisely, the adapter reduces ambiguity in profile assessment and helps to maintain consistent inspection criteria across batches. The defined 4 mm pitch further narrows the tolerance band during evaluation, so measurement routines can be standardised and documented for quality control purposes. This focused functionality makes the accessory particularly useful where reliable pass/fail decisions are needed quickly. Designed for straightforward integration and repeatability Engineered as an accessory for established metrology equipment, the adapter mounts cleanly to compatible measuring systems, preserving instrument geometry and minimising setup time. The robust contact design improves positional stability during measurement, which in turn enhances repeatability and reduces operator influence on results. Where traceability and documented inspection routines are important, the adapter supports efficient data capture when used with instruments that accept accessory inputs, thereby contributing to a smoother quality workflow. Benefit-driven performance for production and inspection Implementing a purpose-built thread measurement adapter streamlines inspection sequences and reduces rework by catching non-conforming threads early. The specialised construction targets the critical parameters of BSF-form threads—angle and pitch—so measurements are meaningful for both engineering verification and workshop acceptance. Where throughput matters, this accessory helps to balance speed with technical confidence, enabling teams to maintain output without compromising documented measurement integrity. Practical considerations for workshop use The adapter is supplied as a ready-to-fit accessory from Microtech Metrology and is intended for use in conjunction with compatible measuring devices. Its compact footprint and defined geometry make it suitable for bench-top metrology stations and modular inspection fixtures. Where multiple thread types are present in a production environment, keeping dedicated adapters avoids repeated adjustments and supports a more ergonomic inspection routine for operators. Contact Metav Werkzeuge today for technical matching or to reserve the Microtech Metrology BSF 55° measuring attachment — the Metav team in Emmerich will advise on compatibility and supply options Technical Data Article number: 141377219T GTIN: 4061905458880 Manufacturer: Microtech Metrology Angle: 55° Pitch: 4 mm Category: Accessory (Zubehör) Facts 55° thread profile 4 mm thread pitch SKU: 141377219T Brand: Microtech Metrology Special features BSF 55° geometry for thread measurement Accessory for precision measuring systems Compact measuring head for bench inspection FAQ What thread profile does the adapter check? The adapter is configured for the BSF 55° thread profile and is intended for verification of that specific angle. Which thread pitch is supported by this accessory? The accessory is set up for a 4 mm thread pitch, matching the data supplied for the adapter. Is the adapter compatible with other measuring instruments? The adapter is compatible with measuring systems that accept accessory measuring heads and is supplied by Microtech Metrology for integration with such devices. How does this accessory improve inspection routines? By providing a defined 55° contact geometry and a fixed pitch reference, the adapter increases repeatability and shortens setup time in routine checks. What identification is used for ordering and traceability? Order or reference the adapter using Article number 141377219T and GTIN 4061905458880 for clear traceability. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
55° Thread Measurement Probe BSF For Thread Gauging - Microtech Metrology
Take advantage of a stable 55° thread profile and a defined pitch 8 to secure reproducible BSF thread inspections; combine precise profile control with easy integration into inspection benches for faster throughput. Order the measuring attachment directly via Metav Werkzeuge or consult the Metav team for application advice. Thread measuring attachment "BSF 55°" — 55° profile for BSF threads, pitch 8 — Microtech Metrology The Thread measuring attachment "BSF 55°" is a precision accessory designed to verify 55° BSF (Whitworth) thread profiles in workshop and laboratory measuring setups. 55° BSF profile for accurate thread checks Compatible with pitch 8 measurements Precision accessory by Microtech Metrology Accurate profile verification for BSF threads The attachment provides a fixed 55° profile tailored to the Whitworth/BSF thread form, enabling repeatable profile checks without iterative adjustment. By matching the geometry of the thread form, the accessory reduces measurement variability and supports consistent pass/fail decisions during quality control. The design focuses on precision and straightforward use, so inspection cycles are shorter and results are easier to interpret in production and testing environments. Easy integration with existing measurement equipment Engineered as a retrofittable metrology accessory, the unit offers mechanical compatibility with standard thread inspection fixtures and measuring benches. Installation requires minimal alignment, which accelerates setup and reduces downtime between measurement tasks. The accessory's predictable contact geometry supports automated and manual workflows alike, improving throughput while maintaining traceable inspection routines under a single measurement procedure. Dependable choice for workshop and lab environments Constructed to maintain geometry over repeated use, the accessory delivers repeatability required for serial inspections and incoming goods checks. Its purpose-built form ensures stable seating in measuring fixtures, which helps to avoid false rejects and unnecessary rework. For test benches and quality departments seeking robust thread verification without excessive complexity, this accessory offers a pragmatic balance of accuracy and operational reliability. Contact Metav Werkzeuge for tailored measurement advice and to source the Microtech Metrology thread measuring attachment in Emmerich; email info@metav-werkzeuge.com or call +49 2822 7131930 for application support and procurement guidance Technical data Article number: 141377214T GTIN: 4061905458835 Manufacturer: Microtech Metrology Facts Angle: 55° Pitch: 8 Special features Thread profile: BSF (Whitworth 55° form) Intended use: Thread measurement accessory Category: Measurement accessories FAQ Is the attachment suitable for standard BSF thread inspection? Yes. The Thread measuring attachment "BSF 55°" from Microtech Metrology is designed specifically for BSF (Whitworth) thread profiles and provides the correct 55° geometry for reliable inspections. What pitch sizes does the accessory support? The accessory is specified with a pitch value of 8 and is intended for use where that pitch is applicable; check compatibility with the thread standard required in the inspection plan. Can the attachment be used in automated measuring setups? Yes. The accessory's defined profile and mounting compatibility allow integration into both manual benches and automated inspection fixtures, supporting consistent measurement routines. Which product identifiers should be used when ordering? Refer to article number 141377214T and GTIN 4061905458835 when enquiring or placing an order for the Microtech Metrology thread measuring attachment. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
55° Thread Measuring Attachment BSF For Thread Inspection - Microtech Metrology
Take advantage of precise 55° profile control and compatibility with a 7 mm pitch for reliable thread inspection. Order the measuring attachment directly via Metav Werkzeuge or consult the team for specification matching and procurement. Measuring attachment BSF 55° — thread measurement accessory by Microtech Metrology The Measuring attachment BSF 55° is a precision accessory for thread inspection, engineered for 55° thread profiles and intended as a fitting for comparators and measuring fixtures in quality control environments. Precise 55° thread profile geometry Compatible with 7 mm thread pitch Accessory for comparators and fixtures Supplied as a single measuring attachment Ensure correct profile control for BSF threads Accurate reproduction of the 55° flank angle is essential for repeatable thread assessment; the measuring head replicates that geometry to enable consistent comparisons against go/no-go criteria. By focusing on the defining angle rather than general thread shape, the attachment reduces ambiguity in profile checks and supports faster decision-making during incoming inspections or in-process audits. The clear mechanical reference provided by the measuring geometry leads to fewer false rejections and a more efficient inspection loop, which is particularly valuable in production environments that handle legacy British Standard Fine (BSF) threads. Quick integration into existing metrology setups Designed as an accessory for comparators and measuring fixtures, the attachment interfaces with standard inspection equipment without extensive modification. Its compatibility with a 7 mm pitch makes it suitable for components that share that thread spacing; the concise form factor supports straightforward mounting and alignment, keeping setup time to a minimum. This practical compatibility translates into operational efficiency: fewer adjustments at changeover, quicker measurement cycles and more consistent throughput in routine quality checks. The result is a tangible improvement in throughput where thread verification is a recurring process. Built for dependable inspection routines and traceable inventory Manufactured by Microtech Metrology, the attachment is intended for systematic use in metrology labs and workshop inspection benches where reproducibility matters. As a dedicated accessory rather than a consumable, it supports repeatable checks across batches and production runs, helping to maintain stable statistical process control. Clear labelling with the product identifiers aids traceability in inspection protocols and stock management. When combined with disciplined measuring procedures, the accessory contributes to reduced rework rates and a steadier quality record for threaded components. Contact Metav Werkzeuge today to discuss integrating the Microtech Metrology BSF 55° measuring attachment into existing inspection workflows and to confirm suitability for the intended thread sizes Technical data Article number: 141377215T GTIN/EAN: 4061905458842 Manufacturer: Microtech Metrology Core specifications Thread angle: 55° Pitch: 7 mm Category: Accessory for measuring instruments Features and compatibility Intended for BSF 55° thread inspection Accessory for comparators and measuring fixtures Supplied individually (not a set) Accessory classification: measuring attachment FAQ Which thread form is the attachment designed for? The attachment is designed for BSF 55° thread profiles and reproduces the 55° flank geometry required for reliable inspections. What pitch is supported by this measuring accessory? This measuring attachment is specified for a 7 mm pitch and is intended for threads that match that spacing. Is the product supplied as a set or individually? The item is supplied individually; it is not delivered as a set and is intended as a single measuring attachment for integration into existing fixtures. Which applications are typical for this accessory? Typical applications include comparator-based thread inspection, workshop quality control, and routine verification of threaded components where BSF profiles are used. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
55° Thread Measuring Attachment For 4–11 TPI Threads, Set Of 9 - Microtech Metrology
Take advantage of a compact, workshop-ready solution that combines a true 55° Whitworth profile, coverage for 4–11 TPI and a nine-piece set for quick thread verification; order directly via Metav Werkzeuge or consult the team for application support. Measuring Attachment BSF 55° — thread inspection attachment, 4–11 TPI, 9-piece set (Microtech Metrology) The Measuring Attachment BSF 55° is a compact thread-profile accessory designed for fast verification of BSF/Whitworth threads across the common 4–11 TPI range in production and service environments. 55° Whitworth thread profile for BSF inspection Covers 4–11 TPI range for common fine threads Supplied as a 9-piece precision set Microtech Metrology traceable accessory Faster, repeatable checks for thread inspection This accessory is intended to speed up routine thread checks by offering a dedicated 55° profile that corresponds to the Whitworth-based BSF form; the combination of a discrete 4–11 TPI range and a 9-piece set enables rapid selection of the correct gauge for the workpiece. By using a dedicated profile rather than improvised methods, inspection throughput increases and error sources tied to subjective comparison are reduced. The attachment is suited for inline usage as an accessory to existing measuring stands and comparators, converting a visual or tactile check into a repeatable verification step and supporting consistent production quality. Clear technical basis for decision-making The 55° angle is the defining geometric parameter of the thread form and ensures the profile matches BSF/Whitworth flanks; this alignment removes ambiguity when assessing form fit and thread condition. The designation 4–11 TPI specifies threads per inch, a common imperial metric for fine British threads, and the set of nine discrete sizes covers the typical workshop spectrum. Using the attachment simplifies the check to a go/no‑go style assessment or a profile-match inspection, which shortens measuring cycles and reduces rework through earlier detection of damaged or incorrect threads. Integrates with workshop process and documentation Delivered as a compact set, the accessory fits into routine metrology workflows as a repeatable instrument for production, maintenance and incoming inspection tasks. The form factor and set configuration reduce tool changes and help maintain a tidy inspection bench, while compatibility with established measuring fixtures allows easy retrofitting. Where traceability is required, the accessory can be documented as part of the inspection kit; its clear labelling and SKU simplify inventory management and ordering from stock suppliers. For reliable BSF thread verification, contact Metav Werkzeuge for supply and application advice — Microtech Metrology accessories and the 9-piece BSF 55° set are available from Emmerich; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 141377291T GTIN: 4061905458606 Name: Measuring attachment (BSF 55°) Range: 4–11 TPI Pieces per set: 9 Angle: 55° Set: yes Facts TPI range: 4–11 Pieces: 9 Angle: 55° Special features BSF / Whitworth 55° thread profile Accessory for thread inspection instruments Supplied as a matched nine-piece set FAQ What thread range does the attachment cover? The attachment covers the common BSF range from 4–11 TPI, supplied as a matched nine-piece set for discrete checks. Which thread form is represented by the 55° profile? The 55° profile corresponds to the Whitworth-based BSF thread form; the attachment reproduces the flank angle used for BSF inspection. Is the set suitable for production and workshop use? Yes, the nine-piece set is designed for workshop and production inspection tasks and integrates with standard measuring fixtures as an accessory. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
55° Thread Measuring Attachment For BSW Threads - Microtech Metrology
Take advantage of the clear metrological definition and the precise 55° geometry combined with compatibility for a 6 mm thread pitch to ensure consistent thread inspections. Order the measuring attachment directly via Metav Werkzeuge or ask our consultants if a specific instrument interface is required. Measuring Attachment BSW 55° for Thread Measurement (Microtech Metrology) Measuring Attachment BSW 55° — a compact accessory created for reliable inspection of BSW thread profiles on workshop and laboratory measuring instruments Precision 55° measuring geometry Designed for BSW thread inspection Compatible with 6 mm thread pitch Manufacturer: Microtech Metrology Consistent results through defined thread geometry The attachment provides a 55° profile specifically matched to the BSW (British Standard Whitworth) form, ensuring repeatable reference points when assessing flank angles and crests. Fitting as an accessory to measuring instruments, this component reduces operator interpretation and speeds up standard inspections by delivering a defined contact geometry. The clear mechanical definition is particularly suited to quality control workflows where comparability and traceability are required. Integration and practical benefits for the workshop Designed as a dedicated accessory for thread measurement, the unit is optimised for rapid use on existing measuring stands and comparators, avoiding lengthy fixture changes. The declared 6 mm pitch compatibility streamlines sampling of commonly specified BSW threads and reduces setup time during batch checks. The compact construction supports straightforward handling, and the robust geometry maintains measurement integrity across routine inspection cycles. Why this accessory supports measurement strategy By supplying a defined measuring interface rather than a subjective visual check, the attachment helps convert manual thread inspection into a reproducible metrological task. The accessory complements established measuring equipment, enabling documented inspections that integrate into quality management processes. For workshops seeking to standardise thread checks without replacing instruments, the measuring head offers a cost-effective route to improved consistency. For tailored advice on instrument compatibility or to procure this Microtech Metrology measuring attachment, contact Metav Werkzeuge — info@metav-werkzeuge.com or call +49 2822 7131930 for technical guidance and order support Technical data Article number: 141377204T GTIN: 4061905458774 Manufacturer: Microtech Metrology Facts Angle: 55° Pitch: 6 mm Category: Accessory for measuring instruments Special features For BSW (British Standard Whitworth) thread profiles Accessory for thread inspection workflows Compact, robust measuring geometry FAQ What thread standard is this attachment intended for? This attachment is intended for BSW (British Standard Whitworth) thread profiles and provides the defined 55° flank geometry required for consistent inspections. Which pitch sizes are supported with this accessory? The attachment is specified for a 6 mm thread pitch as indicated in the product data and is suitable for common BSW measurements at that pitch. Can this accessory be used with any measuring instrument? The accessory is designed as an add-on for measuring instruments; compatibility depends on the instrument's mounting interface and the required fixture. Metav Werkzeuge can advise on instrument compatibility. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
575mm Digitaler Messschieber, 0,01mm, IP 67, Wireless, Kalibriert nach ISO 17025 - Microtech Metrology
Produktfazit Der Messschieber von Microtech Metrology verbindet hohe Messgenauigkeit mit praxisgerechter Robustheit und einfacher Datenerfassung. Nutzen Sie die Kombination aus ±0,05 mm Genauigkeit, ISO 17025 Kalibrierung und Wireless Datenausgang für transparente Prüfabläufe und lückenlose Dokumentation. Bestellen Sie das Gerät direkt über Metav Werkzeuge oder fragen Sie unsere Beratung bei Bedarf an. Messschieber digitaler Messschieber von Microtech Metrology Messschieber digitaler Schieber für präzise Längenmessungen mit Wireless Anbindung, Schutzklasse IP67 und Kalibrierzeugnis für Labor- und Werkstatteinsatz. Digitalanzeige Big Screen Swiss Electronics Messbereich bis 575 mm, handliches Langformat Datenausgang Wireless für einfache Dokumentation IP67 Schutz gegen Staub und Feuchtigkeit Kalibriert nach ISO 17025 mit Kalibrierzeugnis Präzision und Nachweisbare Kalibrierung für Qualitätsprüfungen Die Schieblehre liefert eine Ablesung von 0,01 mm und eine ausgewiesene Genauigkeit von ±0,05 mm, was verlässliche Ergebnisse für Standardprüfungen ermöglicht. Die Auslieferung erfolgt kalibriert; das beiliegende Kalibrierzeugnis nach ISO 17025 schafft Nachvollziehbarkeit für Prüfberichte und erleichtert die Integration in Qualitätsmanagement. Anwender profitieren so von reproduzierbaren Messwerten und dokumentierter Messsicherheit. Robustes Konzept für rauen Werkstattalltag und Baustelle Das Gehäuse und die Elektronik sind für den Einsatz unter anspruchsvollen Bedingungen ausgelegt; die Schutzart IP67 erlaubt Messungen in staubiger Umgebung und bei Spritzwasser. Mit einem Messbereich von maximal 575 mm fällt dieses Modell in die Kategorie „Mit Gross“, wodurch es ausreichend Reichweite für größere Baugruppen bietet, ohne an Handhabungskomfort zu verlieren. Die Konstruktion reduziert Verwindung und sorgt für stabile Messergebnisse über die ganze Länge. Effiziente Datenerfassung und sofortige Lesbarkeit Das Displaykonzept Big Screen Swiss Electronics sorgt für klare Ablesbarkeit, während der Wireless Datenausgang die direkte Übertragung an Auswertesoftware oder Messdatenerfassungssysteme erlaubt. Diese Kombination minimiert Übertragungsfehler, beschleunigt Prüfabläufe und reduziert Dokumentationsaufwand. Für Prüfplätze und Fertigungslinien bedeutet das weniger manuelle Eingaben und schnellere Rückmeldung in der Prozesskontrolle. Zielgruppe, Einsatzbereiche und Praxisnutzen Die Schieblehre richtet sich an Maschinenbau, Vorrichtungsbau, Formenbau und Werkstätten, die häufig Komponenten bis in den mittleren Längenbereich prüfen. Durch die Kalibrierung und den dokumentierten Nachweis eignet sich das Messgerät ebenso für Prüfmittelverwaltung und Stichprobenprüfungen in der Qualitätssicherung. Techniker und Messtechniker erhalten ein Werkzeug, das Reichweite, Robustheit und Dokumentationsfähigkeit in einem Gerät vereint. Empfehlung: Für verlässliche Messungen bis 575 mm empfiehlt sich der Microtech Metrology Messschieber mit Wireless Datenausgang und ISO 17025 Kalibrierung — bei Fragen zur Integration oder zur Bestellung wenden Sie sich an Metav Werkzeuge unter info@metav-werkzeuge.com oder telefonisch +49 2822 7131930 Produkteigenschaften Artikelnummer: 141305154 Marke: Microtech Metrology Bezeichnung: Messschieber Daten Auflösung: 0,01 mm Genauigkeit: ±0,05 mm Messbereich min: 75 mm Messbereich max: 575 mm GTIN: 4061905452635 Besonderheiten Datenausgang: Wireless Digitalanzeige: Big Screen Swiss Electronics IP Schutz: IP 67 ISO 17025: Kalibriert, Kalibrierzeugnis Digital: true Schnabellänge: 300xØ3 FAQ Wie genau ist der Messschieber in der Praxis? Der Messschieber von Microtech Metrology erreicht eine Auflösung von 0,01 mm und eine angegebene Genauigkeit von ±0,05 mm, sodass er sich für Routineprüfungen und Werkstattmessungen eignet. Wird das Messgerät kalibriert geliefert? Ja, der Microtech Metrology Messschieber wird nach ISO 17025 kalibriert geliefert und enthält ein Kalibrierzeugnis, das die Dokumentation für Prüfmittelmanagement erleichtert. Welche Datenschnittstellen stehen zur Verfügung? Das Modell bietet einen Wireless Datenausgang, der die kabellose Übertragung von Messwerten an Auswertesoftware und Prüfsysteme ermöglicht. Ist das Gerät für den Einsatz im Freien geeignet? Durch die Schutzart IP67 ist der Schieber gegen Staub geschützt und gegen zeitweiliges Untertauchen dicht, somit kann er auch in anspruchsvolleren Umgebungen eingesetzt werden. Für welche Bauteillängen ist dieser Schieber vorgesehen? Mit einem maximalen Messbereich von 575 mm gehört das Gerät zur Kategorie Mit Gross und ist ideal für größere Bauteile, Spannmittel und Gehäuse im Werkstatt- und Produktionsumfeld. Hersteller: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
5m USB-C Data And Charging Cable For Data Met Microtech Instruments - Microtech Metrology
Take advantage of reliable HID‑mode data transfer, integrated charging and a generous 5 m cable length for flexible workshop use; order the cable via Metav Werkzeuge or consult our advisers for compatibility and delivery. USB data and charging cable for Data Met instruments (5 m, USB‑C) — Microtech Metrology The USB data and charging cable for Data Met instruments is a workshop cable that provides power and HID‑mode data transfer for Microtech Data Met measuring tools, designed for straight‑forward integration into measurement routines. 5 m length for flexible instrument placement USB‑C connector for modern Data Met instruments Charging plus HID‑mode data transfer Stable data capture and integrated power for metrology tools The cable combines data transfer and charging in a single lead, using HID‑mode (keyboard emulation) to stream measured values directly into host software without additional drivers. This behaviour reduces interface complexity in the data chain and supports fast, repeatable logging from digital indicators and measuring instruments. The USB‑C termination ensures a modern connection standard while the combined function keeps instruments charged during long shifts, improving operational uptime and traceability. Workshop reach and practical routing for bench and mobile use A cable length of 5 m enables more flexible positioning of instruments across benches, machines and inspection tables, reducing the need to relocate measuring devices during setups. The extension offers practical reach for busy production environments and laboratory benches alike, allowing stable placement of Data Met instruments while preserving desk organisation. The single‑lead solution reduces clutter and the number of interfaces to manage, supporting efficient process flow. Simple integration into existing measurement workflows Thanks to keyboard‑emulation data output, measured values appear in any application that accepts typed input, simplifying the handover to spreadsheet, inspection or custom logging software. The cable is intended for connection with Microtech Data Met devices fitted with USB‑C ports and is supplied as a ready‑to‑use accessory for data capture and charging. This straightforward integration reduces the time between measurement and documentation, supporting productivity improvements and consistent data capture quality. Contact Metav Werkzeuge today for delivery options of the Microtech USB data and charging cable (5 m, USB‑C) or for advice on integrating the cable with existing metrology systems Technical data Article number: 141077025 Label: USB DATA+CHARGING cable for Data Met instruments 5m USB‑C [duplicated] Manufacturer: Microtech Metrology Facts Cable length: 5 m Connector: USB‑C Mode: HID (keyboard emulation) Special features Function: Charging and data transfer in HID mode Compatible with Microtech Data Met instruments Supplied: cable FAQ What instruments is the cable compatible with? The cable is compatible with Microtech Data Met instruments that feature a USB‑C port; it provides both charging and HID‑mode data transfer for these devices. How does HID‑mode data transfer work in practice? HID‑mode emulates keyboard input so measurement values from the connected instrument are typed directly into the active field of a host application, enabling quick logging without special drivers. Is the cable suitable for bench and mobile use? Yes, the 5 m length is intended to offer flexible placement across benches, machines and inspection areas while maintaining a single‑cable connection for power and data. Does the cable supply power while transferring data? Yes, the cable provides charging power to the connected instrument and simultaneously transfers measurement data in HID mode. Can the cable be used with custom logging software? Any software that accepts typed input can receive values from the cable in HID mode, so integration with spreadsheets and many custom logging solutions is straightforward. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
600mm Brake Drum Caliper 200mm Jaws Stainless Steel Three-Point Readings, Supplied in Case - Metav IndustryLine
Combine robust stainless-steel construction with a wide 600 mm external range and a precise analogue nonius for repeatable brake-drum and large-component checks; order directly via Metav Werkzeuge or consult our specialists for application advice. Brake Drum Caliper M201.187 — 600 mm external range, INOX construction (Metav IndustryLine) The Brake Drum Caliper M201.187 is an analogue, large-format caliper engineered for internal and external measurement of brake drums and other wide components in workshop and industrial environments. Stainless-steel (INOX) construction 600 mm external measuring range 200 mm jaw length for deep grip Analogue nonius: 1/10 mm internal, 1/20 mm external Accurate large-range measuring where it matters The caliper is designed for tasks that require both reach and repeatability: the 600 mm external span and internal capability from 50–650 mm cover typical brake drums and comparable large parts. The analogue nonius provides clear graduations—1/10 mm for internal and 1/20 mm for external readings—permitting reliable manual measurement without dependency on electronics. This configuration reduces downtime in environments where ruggedness and simplicity are priorities and supports a steady production or maintenance flow through consistent, verifiable readings. Readings made straightforward with a familiar nonius An analogue scale remains a robust choice in busy workshops: the nonius layout on this caliper gives fast, intuitive readings and resists the environmental sensitivities of electronic devices. The separate resolutions for internal and external measurements allow technicians to select the most appropriate scale for the task, while the stated accuracy of 0.2 mm reflects the instrument’s practical tolerance for large-format checking. For users less familiar with nonius reading, the scale can be taught quickly and incorporated into standard inspection routines, improving throughput and reducing measurement uncertainty. Built for handling large components and secure clamping Constructed from stainless steel (INOX), the caliper resists corrosion in workshop atmospheres and delivers stable contact on wide surfaces. The 200 mm jaw length gives additional reach for deep bores and drum contours, while the integrated locking screw secures the slide for transfer measurements and datum retention. These features combine to reduce setup repetition and support reproducible checks on assemblies, fixtures or service items where firm, repeatable positioning matters most. Practical workshop integration and transport The instrument is optimised for heavy-duty workshop routines: the long jaw geometry and robust slide provide the stiffness needed for consistent results over the entire measuring length. Delivery includes a protective case to simplify storage and safe transport between the inspection bench and service bay. Classified as a large-range instrument (500–1,000 mm), it fills the niche between standard workshop calipers and specialised long-stroke gauges, making it a pragmatic choice for maintenance shops, inspection stations and toolrooms aiming to consolidate measuring capability. Contact Metav Werkzeuge for tailored advice on specifying the Metav IndustryLine Brake Drum Caliper M201.187 and to arrange procurement or technical clarification—phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data Article number: M201.187 GTIN: 4054469101033 eCl@ss: 21170344 Tariff number: 90173000 Core specifications External measuring range: 600 mm Internal measuring range: 50–650 mm Jaw length: 200 mm Accuracy: 0.2 mm Scale type: Analogue nonius (internal 1/10 mm; external 1/20 mm) Features and materials Material: stainless steel (INOX) Locking screw: yes Delivery: supplied in protective case Category: caliper, large-range instrument Brand: Metav IndustryLine FAQ How large a component can be measured with this caliper? The Brake Drum Caliper M201.187 accommodates external measurements up to 600 mm and internal checks from 50–650 mm, making it suitable for most brake drums and similarly sized parts. What reading resolution does the instrument provide? The analogue nonius delivers 1/10 mm resolution for internal measurements and 1/20 mm for external measurements on the Metav IndustryLine Brake Drum Caliper M201.187. Is the caliper suitable for workshop environments? Yes. The caliper’s stainless-steel construction, robust slide and locking screw are designed for regular workshop use and transport in the supplied protective case. How repeatable are measurements with this caliper? With its large-format design and secure clamping, the instrument offers stable repeatability for heavy-duty checks; the stated accuracy is 0.2 mm for typical workshop applications. Which applications is this caliper intended for? The instrument is intended for brake-drum inspection, service measurements and large-component checks in maintenance, inspection and manufacturing environments; the long jaw and extended internal range support a wide variety of tasks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
600mm Carbon Fibre Digital Caliper 130mm Jaws, IP65, Bluetooth, mm/inch Display, ISO-Calibrated In Case - Filetta
Take advantage of a light yet stiff carbon-fibre beam combined with steel measuring faces and reliable Digimatic/Bluetooth data transfer for fast, error‑reduced documentation and consistent workshop throughput; order via Metav Werkzeuge or consult our specialists for application advice. Filetta Digital Workshop Caliper M910.342 — Carbon‑fibre beam, 0–600 mm, Bluetooth The Filetta M910.342 is a robust digital workshop caliper designed for large‑format measurements in machine shops and fabrication environments, offering a high‑stiffness beam and protected electronics for everyday industrial use. Carbon‑fibre beam with steel measuring faces Measuring range 0–600 mm Digimatic and Bluetooth data output Dust‑ and waterproof to IP65 Stiff, lightweight construction for repeatable results The combination of a carbon‑fibre beam with steel measuring faces keeps mass low while preserving local stiffness at the jaws, resulting in a tool that is easier to handle over long strokes without sacrificing contact reliability. With a 0–600 mm measuring range and a 130 mm jaw, the caliper sits in the large‑range class (500–1,000 mm), making it suitable for measuring larger fixtures, housings and assemblies where beam rigidity and reproducibility are decisive. The overall length of 826 mm and a weight of 1.3 kg balance reach with manoeuvrability, reducing operator fatigue during repeated tasks. Practical precision and convenient handling for workshop control The instrument features a 0.01 mm display resolution and a stated accuracy of ±0.06 mm, which provides dependable workshop tolerances for production and inspection tasks where rapid checks and documented results are required. The slide offers fine adjustment and a locking screw for controlled, repeatable contact pressure; the specified measuring force of 5–10 N helps standardise contact while reducing variation from manual pressure. The digital display supports mm/Inch switching and ABS/INC modes, plus preset and reset functions, simplifying setup for batch work and first‑off inspections. Integrated data transfer and protected electronics for efficient processes Data can be output via Digimatic or Bluetooth, enabling direct capture into measuring software, spreadsheets or quality logs and minimising transcription errors in the production flow. The unit is sealed to IP65, protecting against dust and water jets commonly encountered in workshops, and is powered by a single CR2032 cell for long shelf and operating life. Delivery includes a protective case for safe transport and storage, so the device remains serviceable at the point of use and integrates smoothly into existing shop measurement routines. Contact Metav Werkzeuge for tailored advice on deploying the Filetta carbon‑fibre workshop caliper M910.342 in production and to discuss data integration; email info@metav-werkzeuge.com or call +49 2822 7131930 for proximity support from Emmerich. Technical data Article number: M910.342 Manufacturer: Filetta Name: Digital workshop caliper Carbon 0–600 mm IP protection: IP65 Facts Measuring range: 0–600 mm Resolution: 0.01 mm Accuracy: ±0.06 mm Overall length: 826 mm Jaw length: 130 mm Weight: 1.3 kg Measuring force: 5–10 N Battery: 1× CR2032 Special features Material: carbon‑fibre beam with steel measuring faces Data output: Digimatic and Bluetooth Display functions: mm/Inch, ABS/INC, On/Off, Reset/Preset Fine adjustment and locking screw Delivered in protective case FAQ How precise is this caliper for workshop checks? The Filetta M910.342 provides a display resolution of 0.01 mm with a stated accuracy of ±0.06 mm, suited to typical workshop tolerances and rapid inspection tasks. Can this caliper handle larger components and fixtures? Yes — with a 0–600 mm range and a 130 mm jaw it is classified in the large‑range category (500–1,000 mm) and is intended for measuring sizeable assemblies and machined parts. What options are available for data capture and logging? The instrument supplies measurement data via Digimatic and Bluetooth, allowing direct recording into measuring systems, data loggers or quality software without manual re‑entry. Is the caliper protected against coolant and dust? The unit is rated IP65, offering protection against dust ingress and low‑pressure water jets, suitable for workshop environments. Is a case and battery supplied with the caliper? The caliper is delivered in a protective case and uses one CR2032 battery for the electronics. Manufacturer / Responsible: Schut Geometrische Meettechniek bv; Duinkerkenstraat 21; 9723 BN Groningen; The Netherlands; +31 50 5877877; schutnl@schut.com
600mm Carbon Fibre Digital Caliper 200mm Jaws, IP65, Battery CR2032, Bluetooth - Filetta
The combination of a 600 mm measuring range, lightweight carbon‑fibre construction and integrated Digimatic and Bluetooth outputs ensures efficient measurement of large components with reliable data transfer; order the instrument directly via Metav Werkzeuge or consult our specialists for application advice. Digital Workshop Caliper Carbon 0–600 mm — long‑range digital caliper with carbon‑fibre beam and 200 mm jaws The Digital Workshop Caliper Carbon 0–600 mm is a robust, long‑reach measuring instrument designed for workshop and production environments where extended reach and mobile data capture are required Carbon‑fibre beam with steel measuring faces 600 mm measuring range for large components IP65‑rated dust and water protection Digimatic and Bluetooth data output Measure larger components with repeatable stability The caliper’s 600 mm span places it in the large‑range class (500–1,000 mm), making it suitable for substantial assemblies such as fixtures, housings and long shafts. The carbon‑fibre beam reduces overall mass while preserving profile stiffness; combined with steel measuring faces this yields a favourable stiffness‑to‑weight ratio that supports reproducible measurements along the entire jaw travel. This balance of reach and rigidity reduces the risk of bending‑induced error during hand measurements and simplifies two‑person handling for bulky parts. Accurate digital readout and seamless data capture Equipped with a digital display that reads to 0.01 mm and a stated accuracy of 0.08 mm, the instrument provides clear, machine‑readable values while minimising manual transcription. Dual data outputs—Digimatic and Bluetooth—enable direct connection to data collectors, inspection software or wireless logging systems, supporting streamlined quality control and traceable measurement records. The IP65 protection rating shields the electronics from workshop dust and splashes, extending service life under typical industrial conditions. Workshop ergonomics and secure handling A long 200 mm jaw length and total instrument length of 826 mm are paired with a practical fine‑adjustment wheel and a secure locking screw, allowing controlled closing and stable retention of readings. The caliper’s measured force range of 5–10 N promotes consistent contact pressure, which contributes to repeatability across multiple measures. Power is supplied by a single CR2032 cell for low maintenance, and the tool is delivered in a dedicated transport case to protect the instrument during transfer between job sites or storage. Integration into inspection routines and production flows Designed as a workshop‑grade digital caliper, the model supports quick inclusion into inspection routines thanks to its digital communication options and familiar keypad functions (mm/inch, ABS/INC, On/Off, Reset/Preset). For manufacturing environments that use digital readouts or SPC systems, the combined Digimatic and Bluetooth outputs significantly reduce data entry steps and help maintain consistent documentation. The unit’s construction and feature set make it a pragmatic choice for maintenance shops, jig and fixture assembly, and production lines where longer reach is required without sacrificing handling convenience. Contact Metav Werkzeuge for technical advice and delivery from our Emmerich warehouse on the Filetta carbon‑fibre 0–600 mm caliper (SKU M910.343); email info@metav-werkzeuge.com or call +49 2822 7131930 for tailored assistance Technical data Article number: M910.343 Label: Digital Workshop Caliper Carbon 0–600mm and 200mm jaw length Manufacturer: Filetta Key figures Measuring range: 0–600 mm Maximum measuring range: 600 mm Total length: 826 mm Jaw length: 200 mm Weight: 1.4 kg Reading resolution: 0.01 mm Accuracy: 0.08 mm Measuring force: 5–10 N Protection class: IP65 Battery: 1x CR2032 Special features Carbon‑fibre beam with steel measuring faces Data output: Digimatic and Bluetooth Display functions: mm/inch, ABS/INC, On/Off, Reset/Preset Fine adjustment wheel and locking screw Delivered in a transport case Robust workshop design suitable for long‑range measurements FAQ What measuring range does this caliper cover? The Digital Workshop Caliper Carbon covers a range of 0–600 mm, making it suitable for larger workshop components and fixtures. Which data interfaces are available for measurement collection? This Filetta caliper offers both Digimatic and Bluetooth outputs for wired and wireless data transfer to readout devices and inspection systems. Is the caliper protected against dust and water? The instrument is rated IP65, providing protection against dust ingress and low‑pressure water jets typical in workshop environments. What power source does the caliper use and how long does it last? Power is via a single CR2032 battery; actual service life depends on usage patterns and wireless operation. Does the caliper include a fine adjustment or locking mechanism? Yes, it features a fine‑adjustment wheel for controlled closing and a locking screw to secure measurements. Manufacturer / Responsible: Schut Geometrische Meettechniek bv; Duinkerkenstraat 21; 9723 BN Groningen; The Netherlands; +31 50 5877877; schutnl@schut.com
600mm Digital Built-In Precision Caliper Horizontal Stainless Steel Capacitive System DIN 862, Large Body - Metav IndustryLine
Combine durable stainless construction, a capacitive digital sensor and a 600 mm measuring range for dependable workshop measurement and repeatable results. Order the digital caliper directly via Metav Werkzeuge or consult our specialists for integration advice. Digital built-in caliper M218.159 — 600 mm capacitive, stainless (Metav IndustryLine) The Digital built-in caliper M218.159 is a 600 mm flush-mounted caliper designed for horizontal installation in production fixtures and shop-floor measuring stations. 600 mm measuring range for large components Capacitive digital sensor for stable readings DIN 862 conformity for standardised measurement Large stainless housing with horizontal mounting Reliable reach with workshop-grade protection This instrument delivers a practical compromise between reach and rigidity: the 600 mm range extends inspection capability to larger parts while the large housing and stainless construction protect the scale from swarf and incidental impacts. Classified as a Large-range caliper (500–1,000 mm), it is tailored for applications in machine building, fixture inspection and component assembly where repeatable measurements over longer spans are required. Compliance with DIN 862 ensures familiar dimensional standards and interoperability with established quality procedures. Stable digital measurement and straightforward data handling A capacitive sensor provides a low-wear measurement principle that resists contamination and yields stable outputs. The high-contrast digital display supports mm/inch switching and ABS/INC functionality plus ZERO/PRESET and on/off control, simplifying repetitive checks and unit conversions. Resolution is 0.01 mm while the declared accuracy 0.06 mm gives a predictable tolerance band for mounted measuring tasks. For traceability and automation, an RB 2 data output is provided to feed measurement results into external recording or SPC systems with minimal effort. Built-in design for robust production integration The flush-mounted, built-in format reduces protrusion from fixtures and helps shield the scale from mechanical damage, extending service life and reducing maintenance intervals. At 1.6 kg the instrument combines manageable mass with structural stiffness suitable for installed measuring stations. The caliper’s balance of reach, protection and digital convenience makes it a practical choice for quality departments and production lines that require consistent metrology across larger components. Backed by Metav’s warehouse and quality filter in Emmerich, the unit integrates smoothly into centralised procurement and workshop-supply chains. For dependable large-range measurement and integration support, contact Metav Werkzeuge GmbH at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss the Metav IndustryLine digital built-in caliper M218.159 and compatible system options Technical data Article number: M218.159 GTIN: 4054469111803 Brand: Metav IndustryLine Standard: DIN 862 Facts Measuring range: 0–600 mm Resolution: 0.01 mm Accuracy: 0.06 mm Weight: 1.6 kg Tariff code: 90173000 eClass: 21170344 Special features Capacitive measuring system Digital display with mm/inch, ABS/INC, ZERO/PRESET and ON/OFF RB 2 data output for external recording Stainless construction, horizontal flush-mounted design Large housing for enhanced protection FAQ What is the construction material of the scale and housing? The caliper features a stainless construction; the large housing is designed for workshop resilience and reduced corrosion risk. What measurement accuracy and resolution can be expected? Resolution is 0.01 mm and the declared accuracy is 0.06 mm for the Metav IndustryLine digital built-in caliper M218.159, suitable for mounted measuring applications with defined tolerance bands. Can measurement data be exported to a PC or SPC system? Yes. The instrument provides an RB 2 data output for straightforward connection to external recording or quality documentation workflows. Is this caliper suitable for measuring large assemblies? Yes. As a Large-range device (500–1,000 mm) it is intended for larger components, toolings and fixtures where extended measuring spans and repeatability are required. Which display functions are available on the unit? The digital module supports mm/inch switching, ABS/INC mode, ZERO/PRESET and an on/off control for quick unit changes and preset measurements. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
600mm Digital Caliper 150mm Blade Cross/Knife Tips 45mm Stainless Fine Adjustment Factory Standard 0.08mm - Metav IndustryLine
Benefit from a long-range, workshop-ready measuring tool that combines a 600 mm measuring capacity with hardened stainless steel construction and a precision fine-adjustment mechanism for reproducible results; the instrument supports clear digital read‑out and convenient unit switching. Order the caliper directly via Metav Werkzeuge or consult the technical advisers for application-specific guidance. Digital Caliper M217.028 — 600 mm range, fine-adjustment (Metav IndustryLine) A Digital Caliper M217.028 designed for measurement of large components in the workshop and toolroom, featuring combined cross and blade jaws for versatile external and internal checks. 600 mm measuring range Hardened stainless steel construction Fine-adjustment for reproducible settings Digital display with mm/inch and hold Reliable accuracy for large-format measurement The long-beam design addresses applications where reach and stability are essential: with a 600 mm measuring capacity and fully hardened stainless steel construction, the instrument is intended for reproducible measurement of larger fixtures, housings and assemblies. The integrated fine-adjustment mechanism minimises overshoot when closing the jaws, allowing precise positioning on the workpiece and consistent measurement initiation. Factory calibration to the declared Werksnorm with a tolerance of 0.08 mm establishes a clear quality baseline for incoming inspection and routine shop use. Built for workshop endurance and practical handling Robust materials and considered ergonomics reduce measurement variation over repeated cycles. The hardened stainless steel body resists wear and keeps sliding surfaces true; the extended jaw length of 150 mm supports probing deeper or recessed features while maintaining stiffness. At a weight of 1.4 kg the instrument remains manageable for single-person operation on benches or fixtures, while the long-beam format minimises bending across the useful span. The result is a device that combines reach, rigidity and repeatability for everyday industrial measurement tasks. Digital features that speed up inspection workflows The electronic readout provides immediate numeric values with 0.01 mm resolution and an inch equivalent reading of 0.0005 in, simplifying cross‑unit documentation. Dedicated keys include on/off, mm/inch, zero/ABS, hold, TOL and preset, enabling tolerance checks, temporary zeroing and data capture preparation without additional tools. A defined data output interface (RB 5) allows integration with data collection systems where required, supporting traceable measurement logging and reduced transcription errors during quality control. Contact Metav Werkzeuge to discuss how the Metav IndustryLine M217.028 can be integrated into production or inspection routines and to request a tailored quotation via the Emmerich team Technical data Article number: M217.028 GTIN: 4054469110769 ECLASS: 21170344 Brand: Metav IndustryLine Norm: Werksnorm Numbers / Core technical data Measuring range: 0–600 mm Resolution: 0.01 mm Inch resolution: 0.0005 in Jaw length: 150 mm Weight: 1.4 kg Factory tolerance: 0.08 mm Designs / Special features Material: hardened stainless steel Jaw types: cross point and blade (combined) Fine-adjustment mechanism Digital display with on/off, mm/inch, zero/ABS, hold, TOL, preset Data output: RB 5 Delivery format: workshop instrument (see ordering options) FAQ What measuring range does this caliper cover? The caliper covers a measuring span of 0–600 mm, making the M217.028 suitable for larger workshop components and long-beam measurement tasks. Is the instrument suitable for industrial quality control? Yes, the M217.028 from Metav IndustryLine offers a digital readout with 0.01 mm resolution and a factory tolerance of 0.08 mm, providing reliable values for standard inspection routines. Which materials is the caliper constructed from? The body and jaws are made from fully hardened stainless steel to provide long-term wear resistance and consistent mechanical stability. Can measurements be recorded electronically? A dedicated data output (RB 5) is provided to enable connection to data collection systems for traceable documentation of readings. Does the caliper include functions for tolerance checks? Yes, the display features a TOL function plus preset and hold keys to facilitate quick tolerance verification during repetitive checks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
600mm Digital Caliper 150mm Jaw Depth Rod Fine Adjustment Stainless Steel In Plastic Case - Metav IndustryLine
Combine robust hardened stainless steel construction with a 600 mm measuring range and a precise 0.01 mm display to keep production checks fast and reliable; the fine‑adjustment thumb screw ensures controlled contact for repeatable results. Order the digital caliper directly via Metav Werkzeuge or contact our consultants for application advice. Digital caliper M217.058 – 600 mm range, fine adjustment (Metav IndustryLine) The Digital caliper M217.058 is a large-format workshop instrument designed for industrial measurement tasks up to 600 mm, combining reach, stiffness and a controlled sliding mechanism for reliable shop‑floor use. 600 mm measuring range for large components Hardened stainless steel construction Fine‑adjustment thumb screw for precise contact Digital display with mm/inch, TOL and PRESET Measure large assemblies with controlled precision For operations that require reach without sacrificing repeatability, this large‑format caliper delivers a 600 mm span while maintaining measurement stability. Classified among workshop calipers for the 500–1,000 mm range, the instrument balances reach and rigidity so measurements across a component remain comparable. The 0.01 mm display resolution supports routine quality checks and production control, while the fine adjustment allows technicians to close the jaws smoothly for consistent contact force — a practical way to reduce rework and ensure parts leave the bench within tolerance. Built for workshop durability and predictable handling The sliding parts are machined from hardened stainless steel, providing corrosion resistance and long service life under everyday shop conditions. Extended jaws with a jaw length 150 mm offer secure contact on larger features; the calibrated rack and thumb screw help to reduce operator variation during repetitive checks. The tool is delivered to Werksnorm 0.06 mm, giving a clear factory tolerance for standard inspection routines. The digital display groups functions such as ON/OFF, mm/inch, 0/ABS, HOLD, TOL and PRESET to keep common tasks immediate and error‑free. Integrate measurements into digital workflows The caliper includes RB 5 data output for straightforward transfer of readings to SPC systems or inspection software, speeding documentation and cutting manual transcription errors. Quick toggling between mm/inch, the tolerance alarm function and PRESET support inline checks, while the standard 3 V power supply offers long‑running operation with low maintenance demands. The combination of digital readout and data output makes the instrument suitable for machine shops, quality departments and assembly lines seeking efficient traceability and fast decision making. Contact Metav Werkzeuge for technical details and procurement of the Metav IndustryLine digital caliper M217.058; our Emmerich warehouse supplies and consultants support selection and delivery – info@metav-werkzeuge.com / +49 2822 7131930 Technical data Article number: M217.058 GTIN: 4054469111018 Brand: Metav IndustryLine eClass: 21170344 Norm: Werksnorm Facts Measuring range: 0–600 mm Resolution (mm): 0.01 mm Resolution (inch): 0.0005 in Jaw length: 150 mm Power supply: 3 V Data output: RB 5 Special features Material: fully hardened stainless steel Fine adjustment (thumb screw) Digital display with ON/OFF, mm/inch, 0/ABS, HOLD, TOL, PRESET Large‑format caliper for 500–1,000 mm class Factory tolerance: Werksnorm 0.06 mm Data output interface: RB 5 FAQ Is the caliper suitable for measurement of large components in the workshop? The Digital caliper M217.058 is designed for large‑format tasks up to 600 mm and provides the rigidity and jaw length needed for reliable workshop measurements. What accuracy can be expected during routine checks? Routine readout resolution is 0.01 mm; the instrument is supplied to a factory tolerance of Werksnorm 0.06 mm for standard inspection use. Does the caliper support digital data transfer to inspection systems? Yes. The M217.058 features RB 5 data output for integration with SPC or inspection software to streamline recording and analysis. Which display and operating functions are available? The digital display includes ON/OFF, mm/inch switching, 0/ABS, HOLD, TOL and PRESET to cover common measuring and tolerance workflows. Is the construction suitable for everyday shop use? The caliper is manufactured from fully hardened stainless steel, offering corrosion resistance and durability for regular workshop operation. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
600mm Digital Caliper Fine-Adjustment Stainless Steel IP65 With mm/inch, 0/ABS, Hold, Tolerance, Preset - Metav IndustryLine
Benefit from a 600 mm measuring range, hardened stainless-steel construction and a precise fine adjustment mechanism for consistent large-format measurements; order the instrument directly via Metav Werkzeuge or consult our specialists for application advice. Digital Caliper M217.058.1 — Metav IndustryLine, 600 mm range, fine adjustment The Digital Caliper M217.058.1 is a robust 600 mm digital caliper designed for large-format workshop and production measurement, suited to heavy machining, fixture inspection and component verification. 600 mm measuring range Hardened stainless-steel construction Fine adjustment for precise positioning Digital display with mm/inch & TOL functions Reliable large-format measurement for workshop and production This caliper’s 600 mm range places it in the large‑range class (500–1,000 mm), addressing measurement tasks that exceed the reach of standard workshop calipers while retaining manageable handling and repeatability. The fully hardened stainless-steel beam provides the stiffness needed to minimise deflection over long spans, so measurements taken on sizeable components—such as large housings, clamping fixtures or pipe sections—remain reproducible. The instrument is supplied to the manufacturer's factory tolerance (Werksnorm 0.06 mm), giving a clear, verifiable reference for quality control and process planning. Digital convenience and precise control for efficient inspection Equipped with a high‑contrast digital readout and standard functions (ON/OFF, mm/inch, 0/ABS, HOLD, TOL and PRESET), the caliper delivers the practical features expected on the shop floor. The display resolution of 0.01 mm supports routine dimensional control with clear, comparable values, while the integrated fine adjustment enables smooth, micro‑accurate positioning of the jaws for repeatable contact pressure and improved measurement stability. The instrument includes a data output (RB 5) for streamlined transfer of readings into documentation or inspection systems, supporting faster, error‑reduced workflows. Built for workshop durability and straightforward integration Construction in fully hardened stainless steel gives the caliper a corrosion‑resistant surface and the mechanical resilience required for daily industrial use. The digital measurement electronics run on a 3 V system, ensuring dependable operation with common batteries. The tool’s jaw geometry and a 200 mm jaw length balance contact area and accessibility when addressing deep or awkward features. For traceable baseline checks the caliper adheres to the specified factory standard; further calibration and certification options can be arranged where laboratory traceability is required. Request application advice from Metav Werkzeuge to confirm suitability for specific large-part measuring tasks and secure reliable delivery from our Emmerich quality hub Technical data Article number: M217.058.1 GTIN: 4054469111025 Brand: Metav IndustryLine Material: fully hardened stainless steel Measuring range: 0–600 mm Resolution: 0.01 mm Jaw length: 200 mm Data output: RB 5 Display functions: ON/OFF, mm/inch, 0/ABS, HOLD, TOL, PRESET Measuring system: 3 V Standard: Werksnorm 0.06 mm Facts Measuring range max: 600 mm Resolution (display): 0.01 mm Jaw length: 200 mm Voltage: 3 V GTIN: 4054469111025 Special features Fine adjustment mechanism Digital readout with TOL and PRESET Corrosion‑resistant hardened construction Data output for system integration Supplied to factory tolerance (Werksnorm 0.06 mm) FAQ What is the measuring range of the caliper? The Digital Caliper M217.058.1 offers a measuring range of 0–600 mm, designed for large‑format components within the 500–1,000 mm class. What resolution and display functions are available? This caliper provides a display resolution of 0.01 mm and includes ON/OFF, mm/inch, 0/ABS, HOLD, TOL and PRESET functions for flexible inspection routines. Is the caliper suitable for heavy‑duty workshop use? Yes, the fully hardened stainless‑steel construction of the Digital Caliper M217.058.1 is intended for robust, daily industrial use and large‑part measurement tasks. Does the instrument offer data output for integration with inspection software? The caliper features a data output (RB 5) to facilitate transfer of measurements into compatible inspection systems and documentation workflows. What tolerance or calibration standard applies on delivery? The Digital Caliper M217.058.1 is supplied to the manufacturer's factory tolerance (Werksnorm 0.06 mm); specific calibration certificates can be arranged where laboratory traceability is required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
600mm Digital Caliper With 150mm Depth Rods And Cross Tips, Fine Adjustment, 0.01mm Readout, Factory Standard, Supplied In Case - Metav IndustryLine
Take advantage of the 600 mm measuring range, fine adjustment and a clear digital interface to measure large components with reproducible results; the hardened stainless construction ensures long-term stability in a busy workshop. Order the Metav IndustryLine digital caliper directly via Metav Werkzeuge or ask our consultants for advice. Metav IndustryLine Digital Caliper M217.038 – 600 mm range, hardened stainless steel The Metav IndustryLine M217.038 is a heavy-duty digital caliper designed for larger workshop and fixture measurements, combining a long measuring span with fine adjustment and a multifunctional digital display for traceable results *Large 600 mm measuring range, 150 mm jaw depth *Stainless hardened construction for workshop use *Fine adjustment and precise 0.01 mm resolution Measure larger components with repeatable stability This long-bar caliper sits in the 500–1,000 mm class and is optimised for measurements where reach and stiffness matter. The extended 600 mm span provides the coverage required for castings, housings and larger clamps while the hardened stainless steel beam maintains straightness and wear resistance across long-term use. The benefit for production and inspection is clear: fewer setups, consistent measuring geometry and fewer transfer errors when checking larger assemblies. Confident, traceable readings and convenient data handling A high-contrast digital display equipped with ON/OFF, mm/inch, 0/ABS, HOLD, TOL and PRESET keys gives straightforward control over measurement mode and tolerances; the display uses a standard 0.01 mm resolution and an inch step of 0.0005 in, providing clear numeric guidance for quality checks. The unit also offers a data output RB 5 interface for recording measurements directly into a data-collection workflow, reducing transcription errors and speeding up inspection cycles. The caliper meets the maker's Werksnorm 0.08 mm, ensuring a consistent baseline for everyday workshop accuracy. Precision handling and workshop convenience Fine adjustment allows controlled closing of the jaws for delicate surfaces and repeatable positioning, which reduces influence from hand pressure and improves reproducibility on delicate parts. Cross-point measuring tips expand the application range to reach into grooves and recesses while the overall design keeps common inspection tasks ergonomic and fast. The instrument is supplied in a transport case for secure storage and safe movement between workstations, which supports orderly workflows on the shop floor and protects the gauge between uses. Discuss the suitability of the Metav IndustryLine M217.038 for specific applications with Metav Werkzeuge in Emmerich or request configuration advice by phone or e‑mail Technical Data Article number: M217.038 GTIN: 4054469110806 Manufacturer: Metav IndustryLine ECLASS: 21170344 Facts Measuring range: 0–600 mm Resolution (display): 0.01 mm Inch resolution: 0.0005 in Jaw depth: 150 mm Norm: Werksnorm 0.08 mm Special features Material: stainless, fully hardened steel Fine adjustment for controlled jaw movement Digital display with ON/OFF, mm/inch, 0/ABS, HOLD, TOL, PRESET Data output RB 5 for external logging Cross-point measuring tips for internal and recessed measurements Supplied in a transport case for protection FAQ What accuracy can be expected with this caliper? The Metav IndustryLine M217.038 offers a display resolution of 0.01 mm and is supplied to the manufacturer's Werksnorm 0.08 mm, providing reliable workshop-level accuracy for larger components. Is the caliper suitable for measuring internal grooves and recesses? Yes, the caliper is delivered with cross-point tips and a fine-adjustment mechanism, enabling precise internal and recessed measurements with controlled jaw contact. Can measurement data be exported from the instrument? Measurement data can be exported via the RB 5 data output, allowing direct integration of readings from the Metav IndustryLine caliper into inspection and documentation systems. What material is the beam made from and how does that help in the workshop? The beam and jaws are manufactured from fully hardened stainless steel, which resists wear and maintains straightness over long measuring lengths, ensuring reproducible results in daily shop use. Is the instrument delivered protected for transport between workstations? The caliper is supplied in a protective transport case to keep the instrument secure during movement and storage, helping to preserve calibration and precision. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Precision calipers for accurate, repeatable measurement
Calipers are the indispensable length-measuring tools for industry and workshop environments, enabling fast and exact external, internal, depth and step measurements. Our professional range of precision calipers, including vernier calipers, dial calipers and digital calipers, combines mechanical robustness with modern data handling to support consistent quality assurance.
How these calipers work and where they help most
Analogue vernier calipers deliver reliable, autarkic operation via the vernier scale and are best suited to heavy-duty workshop use where durability matters. Digital calipers provide a contrast-rich display, minimise reading errors and speed up inspection routines through functions such as zero setting and data output. At the high end, touchscreen calipers from Microtech feature an integrated microcomputer, colour touch display, built-in error-tolerance checks and wireless data transmission, making them suited for Industry 4.0 workflows. Workshop calipers with extended measuring ranges offer optional fine adjustment and rounded tips for interior measurements, while in-built calipers can be mounted directly to machines or test rigs to monitor travel. Specialty calipers cover tasks such as deep grooves, pipe wall thickness, brake disc inspection, three-point measurements and bespoke geometries.
Tangible benefits that improve production performance
- Faster throughput: digital calipers with data output reduce manual entry and accelerate quality checks.
- Higher repeatability: robust mechanical design and error-tolerance controls raise measurement consistency.
- Flexible integration: wireless data transmission and touchscreen operation simplify digitisation to existing systems.
- Reduced downtime: workshop and in-built variants with fine adjustment minimise rework and set-up time.
- Application coverage: specialty calipers adapt to complex geometries, from three-point checks to deep-niche measurements.
Microtech and metav — quality and supply you can rely on
For high-end, touchscreen-equipped instruments, Microtech represents the technological benchmark thanks to its integrated controls and wireless capabilities. As a precision partner, Metav complements this with decades of experience and a comprehensive offering: more than 250,000 products, a European quality filter in Emmerich and the trust of over 48,000 customers, making Metav a sensible central source for calipers and measuring equipment.
Quick summary
Calipers — from analogue vernier to touchscreen digital — deliver the measurement accuracy and data connectivity modern production demands while reducing inspection time and improving repeatability.
FAQ
What are the main differences between analogue and digital calipers?
Analogue vernier calipers rely on a vernier scale and are prized for ruggedness and independence from power, whereas digital calipers provide a contrast display, zero setting and data output to eliminate readout errors and speed up quality processes.
Can calipers be integrated into a digital inspection workflow?
Yes. Many digital calipers and touchscreen models support data output and wireless data transmission, enabling direct transfer of measurements into quality-management systems or statistical process control.
Which caliper type is best for large measuring ranges in a workshop?
Workshop calipers with extended measuring ranges and optional fine adjustment are designed for large components; they maintain mechanical stability and are available with rounded interior jaws for safer internal measurements.
Are there calipers for specialised geometries like deep grooves or brake discs?
Specialty calipers are explicitly engineered for such tasks. They feature tailored measuring faces for deep-niche measurements, pipe wall thicknesses, brake-disc checks and three-point or flexible geometries.
How do touchscreen calipers from Microtech improve quality control?
Microtech touchscreen calipers combine an integrated microcomputer, colour touch display and built-in error-tolerance checks with wireless data transmission, allowing immediate verification, reduced human error and seamless digitisation in line with Industry 4.0 practices.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com