Precision calipers for reliable industrial measurement
Precision calipers and their variants provide fast, repeatable outside, inside, depth and step measurements to ensure component conformity and process control on the shopfloor, combining mechanical robustness with digital data handling for traceable results. Designed for use in industrial quality assurance and manufacturing, these calipers serve applications from rough workshop environments to precision inspection, with options such as analogue vernier calipers for durable, battery‑free operation and digital calipers offering clear displays and data output to speed up quality workflows. Specialist formats, including workshop calipers with extended ranges and built‑in mounting calipers for machine or fixture monitoring, extend capability to long strokes and embedded measurement tasks, while bespoke models handle deep grooves, pipe wall thicknesses and three‑point or other complex geometries. The range emphasises highest accuracy and process integration, featuring high‑end touchscreen models with integrated microcomputers, wireless data transfer and Industry 4.0 compatibility to modernise measurement and quality data capture.
600mm Digital Caliper With 150mm Probes, Fine Adjustment, Stainless Hardened, IP65? - Metav IndustryLine
Take advantage of the combination of a 600 mm measuring range, fully hardened stainless steel construction and a precise fine-adjustment thumb roller for reliable workshop measurement; Order the Digital Caliper M217.048 directly via Metav Werkzeuge or ask our consultants if needed Digital Caliper M217.048 — 600 mm range, 150 mm fine jaws by Metav IndustryLine The Digital Caliper M217.048 is a large‑range precision caliper intended for workshop and heavy‑duty machining tasks, combining a 600 mm measuring range with long, fine‑adjustment jaws for controlled positioning 600 mm measuring range, 150 mm fine jaws Hardened stainless-steel construction Digital display with mm/inch, HOLD, TOL, PRESET Fine-adjustment thumb roller for precise positioning RB 5 data output for traceable transfer Reliable large‑range measurement for heavier components Built for tasks that exceed standard shop lengths, this caliper sits in the large measuring‑range class (measuring range up to 500–1,000 mm) and is designed to keep measurements reproducible over extended spans. The 600 mm scale and 150 mm jaws provide reach for larger fixtures, housings and assemblies while retaining handling characteristics that remain practical for one or two operators. The fully hardened stainless steel beam improves wear resistance and maintains straightness so readings remain consistent over time; the tool conforms to the stated factory standard 0.06 mm for workshop tolerance. Precise readout and controlled handling for repeatable results The electronic system delivers a standard display resolution of 0.01 mm, allowing clear comparison of components against tolerances. Combined with the fine-adjustment thumb roller, the instrument supports deliberate, low‑force closing and high repeatability even when working with heavier jaws. With a mass of 1.35 kg, the caliper balances solidity and manoeuvrability to reduce vibration and operator‑induced error, making it a reliable instrument for routine quality checks and workshop metrology tasks where stability matters. Practical digital functions and data transfer for process integration The unit’s digital display provides straightforward controls — mm/inch, HOLD, TOL and PRESET — to speed measurement routines and support quick tolerance checks without manual conversion. Power is supplied by a 3 V cell and data can be exported via the RB 5 interface for traceable recording and integration into inspection workflows. The combination of electronic convenience and mechanical robustness positions this caliper as a pragmatic choice for departments that value clarity of measurement, simple documentation and reduced transcription errors For dependable large‑range measurement from Metav IndustryLine, contact Metav Werkzeuge for a tailored quote on the M217.048 or consult our specialists in Emmerich for application advice Technical data Article number: M217.048 GTIN: 4054469110868 Manufacturer: Metav IndustryLine Facts Measuring range: 0–600 mm Jaw length: 150 mm Resolution: 0.01 mm Weight: 1.35 kg Power: 3 V Data output: RB 5 Special features Material: fully hardened stainless steel Fine-adjustment thumb roller Digital functions: ON/OFF, mm/inch, 0/ABS, HOLD, TOL, PRESET Factory standard: Werksnorm 0.06 mm FAQ Is the caliper suitable for measuring large workshop components? The caliper is designed for larger parts; with a 0–600 mm measuring range the M217.048 fits the large‑range category for workshop and heavy‑duty measurements. What accuracy and resolution can be expected? The instrument provides a display resolution of 0.01 mm and is supplied to a factory standard tolerance of 0.06 mm, making it appropriate for routine industrial quality checks. What material is the body made from and why is that important? The M217.048 is made from fully hardened stainless steel, which increases wear resistance and maintains beam straightness for repeatable readings in workshop environments. Which digital functions are included on the display? The caliper’s digital display includes ON/OFF, mm/inch selection, 0/ABS, HOLD, TOL and PRESET functions to facilitate quick checks and unit conversion. How is measurement data exported for documentation? Measurement values can be transferred via the RB 5 data output, enabling traceable recording and integration into inspection routines. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
600mm Digital Caliper With 200mm Jaw, Inductive System, Fine Adjustment, IP65 - Metav IndustryLine
Take advantage of the combination of a 600 mm measuring range, IP65 protection and an inductive measuring system for reliable shop-floor measurement of large components; order the instrument directly via Metav Werkzeuge or contact the consultants for tailored technical advice. Digital workshop caliper without tip (M217.124.1) — 600 mm range, IP65 protection, Metav IndustryLine The Digital workshop caliper without tip (M217.124.1) is a large-range precision caliper designed for heavy workshop use and measuring sizable components where robustness and repeatable results matter IP65 protection for harsh workshop conditions 600 mm measuring range with 200 mm jaws Inductive measuring system with 0.01 mm readout Fine-adjustment slider for controlled positioning High-accuracy measurement across long ranges The large-range classification for this instrument places it in the large-range caliper category (500–1,000 mm), making it suitable for measurements that require reach without sacrificing reproducibility. With a 600 mm measuring range and an inductive measuring system, the device delivers a clear 0.01 mm display step while its general accuracy is specified as Gen. 0,06 mm, providing a dependable baseline for workshop quality checks. The inductive system reduces susceptibility to surface contamination compared with mechanical readers, which helps maintain consistent readings over longer distances and in demanding environments. Built for workshop durability and precise handling Constructed from fully hardened stainless steel, the instrument combines corrosion resistance with the profile stiffness needed for repeatable long-span measurements. The 200 mm jaw length supports stable contact on larger workpieces, while the integrated fine adjustment slider allows controlled, incremental positioning for delicate aligning tasks. At approx. 1.2 kg, the caliper balances mass and manoeuvrability for single-operator handling and steady measurement work on heavy parts. Seamless data capture and practical display functions Equipped with a digital display that toggles mm/inch and offers HOLD, SET, ON/OFF, 0/INC and DATA functions, the instrument supports standard workshop workflows. The supplied RB 6 data output provides a direct machine-readable feed for compatible data collectors and external loggers, simplifying documentation and process control. The IP65 rating protects the electronics from dust and water jets, so data capture remains reliable even in lubricated or dusty production zones. Applications, suitability and operational benefits This caliper is ideal for toolrooms, fixture construction and heavy machining where extended reach and durability are required: measuring housings, shafts, mounting faces and larger assemblies. The combination of an inductive measuring system and a robust casing reduces measurement noise on the shop floor, while the clear digital functions accelerate routine inspections. Metav IndustryLine’s emphasis on accessible precision means this instrument is offered with the practical service infrastructure of a European logistics and quality filter, supporting straightforward procurement and professional aftercare when needed. For robust, long-range measurement choose the Metav IndustryLine digital workshop caliper — contact Metav Werkzeuge for technical consultation and reliable supply from Emmerich. Technical data Article number: M217.124.1 GTIN: 4054469164816 Manufacturer: Metav IndustryLine Measuring range: 0–600 mm Jaw length: 200 mm Resolution: 0.01 mm Weight: 1.2 kg Protection class: IP65 Material: fully hardened stainless steel Measuring system: inductive Display functions: mm/inch, HOLD, SET, ON/OFF, 0/INC, DATA Data output: RB 6 Fine adjustment: integrated slider FAQ What measuring range and jaw length does the caliper cover? The Digital workshop caliper without tip (M217.124.1) covers a measuring range of 0–600 mm and features a 200 mm jaw length for stable contact on larger components. How precise is the instrument for routine workshop checks? The instrument offers a display resolution of 0.01 mm and a general accuracy indication of Gen. 0,06 mm, combining clear readout with practical repeatability for shop-floor inspection. Is the device suitable for use in dusty or damp workshop conditions? Yes. The caliper is rated IP65, which protects the electronics against dust ingress and water jets, making it suitable for robust workshop environments. What data functions are available for documentation and logging? The caliper provides mm/inch display, HOLD, SET, 0/INC and DATA functions on the screen, together with an RB 6 data output for integration with compatible data collectors. Which materials and usages is the caliper designed for? Built from fully hardened stainless steel, the instrument is intended for general-purpose measurement of large metal components, fixtures and assemblies commonly encountered in machine shops and toolrooms. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
600mm Digital Caliper With 300mm Depth Probes, Hardened Stainless Steel, IP65 RB 5 - Metav IndustryLine
The combination of a large 0–600 mm measuring range, hardened stainless-steel construction and precise fine adjustment supports reproducible measurements across larger components; benefit from clear digital readout and RB 5 data output for streamlined quality documentation. Order the caliper directly via Metav Werkzeuge or consult our specialists for application support. Digital Caliper M217.049 — 0–600 mm, hardened stainless steel, fine adjustment (Metav IndustryLine) The Digital Caliper M217.049 is a robust, large‑range measuring instrument designed for workshop and inspection tasks, offering fine adjustment, data output and corrosion‑resistant hardened stainless‑steel construction for consistent results on moderate to large components. 0–600 mm measuring range Hardened stainless‑steel construction Fine adjustment for precise positioning RB 5 data output; mm/inch and hold functions Large‑range precision for workshop and fixture work This caliper is configured as a large‑range (500–1,000 mm) instrument, making it suitable for measuring medium to large assemblies where reach and stiffness are decisive. The 0–600 mm span bridges the gap between standard workshop calipers and specialist long‑format gauges, so common tasks such as checking housings, fixtures or medium‑sized shafts can be completed with fewer setups. The hardened stainless‑steel beam preserves profile rigidity during use, which reduces measurement variation across the full travel. Clear digital readout and data handling for efficient QC Equipped with a digital display offering 0.01 mm resolution and an inch reading of 0.0005 in, the instrument supplies immediate numeric results that accelerate inspection routines. The display includes On/Off, mm/inch, zero/absolute, hold, tolerance (TOL) and preset functions, enabling quick checks against nominal values and straightforward integration into documented processes. The RB 5 data output simplifies transfer of measured values to logging systems or SPC software, which supports traceable quality workflows and reduces manual transcription errors. Practical features that support repeatable measurement A dedicated fine adjustment mechanism permits careful jaw approach for delicate seating and repeatable contact force, improving positioning on longer jaws and narrow features. The caliper is supplied with pointed measuring faces for specialised contact situations and a 300 mm jaw length that extends internal and depth measurement capability. The tool’s factory standard (Werksnorm) 0.08 mm indicates the production tolerance applied during manufacture, providing a clear reference for inspection acceptance in typical workshop contexts. For reliable large‑range measurement and straightforward data capture request the Metav IndustryLine M217.049 from Metav Werkzeuge — contact our specialists in Emmerich for an application review and tailored delivery details Technical data Article number: M217.049 GTIN: 4054469110882 Weight: 5 kg Material: stainless steel, fully hardened Measuring range: 0–600 mm Jaw length: 300 mm Core technical data Resolution: 0.01 mm Resolution (inch): 0.0005 in Power: 3 V Factory tolerance (Werksnorm): 0.08 mm Display type: digital Special features Fine adjustment mechanism Data output: RB 5 Digital functions: On/Off, mm/inch, zero/ABS, hold, TOL, preset Supplied in protective case Pointed measuring faces for specific contact tasks FAQ What measuring range does this caliper cover? The Metav IndustryLine Digital Caliper M217.049 covers 0–600 mm, providing a large working range for medium‑sized components. What resolution and readout options are available? The instrument offers 0.01 mm resolution on the digital display and 0.0005 in in inch mode, with mm/inch conversion, zero/ABS and hold functions. Is the caliper suitable for use in a production quality system? Yes, the M217.049 includes RB 5 data output for integration into data‑collection and SPC systems, facilitating traceable documentation of measured values. What material is the caliper made from and why does it matter? The caliper is manufactured from fully hardened stainless steel, which maintains beam stiffness and resists corrosion for longer service life under workshop conditions. Does the tool include a case and what type of jaws are fitted? The caliper is supplied in a protective case and fitted with pointed measuring faces and extended 300 mm jaw length for depth and internal measurements. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
600mm Digital Einbaumessschieber waagerecht, 0,01mm, DIN 862 - Metav IndustryLine
Die hervorragenden Bewertungen von Metav Werkzeuge stehen für 42.000 erfreute Kunden. Mache Deine eigenen Erfahrungen und shoppe bei metav-shop.de.! HIGHLIGHTS waagerecht Messbereich: bis 600mm Ablesung: 0,01mm Material: Messschiene aus Aluminium (30x7,9mm) Ausführung: digital Datenausgang: RB 5 Mehr Reichweite 0 bis 600mm schließt die Lücke zwischen kurz und lang. Du kannst lange Profile, Leisten oder Rohre bequem prüfen. So läuft der Ablauf glatt. Ideal für Innenausbau und Fertigung. Schauen Sie hier, wie wir die Messbereiche klassifiziert haben. Klassifizierung Messbereiche beim Messschieber. Die richtige Toleranz einhalten nach DIN 862 Unser Einbaumessschieber wird vollständig nach den einschlägigen DIN-Normen gefertigt – sämtliche Materialien, Fertigungs- und Kalibrierverfahren entsprechen den Anforderungen der DIN 862. Damit sind Maßhaltigkeit und Wiederholgenauigkeit garantiert, Prüfzertifikate sind international kompatibel, und Audits oder Kundenfreigaben lassen sich deutlich schneller durchlaufen. Die DIN-Konformität sichert konstante Qualität, erleichtert die weltweite Einsetzbarkeit und stärkt das Vertrauen in jedes einzelne Messergebnis. Profi-Empfehlung: Welche Messkraft ist richtig? Nur mit Daumendruck schließen – übermäßiges Klemmen biegt die Schenkel zusammen und führt zu „negativen“ Messwerten. Technische Daten für digitalen Einbaumessschieber von Metav IndustryLine: Marke: Metav IndustryLine Bezeichnung: Einbaumessschieber Bestellnummer: M218.359 Fakten zum Werkzeug: Messbereich: 0 bis 600mm Gewicht: 0,5kg Norm: DIN 862 Ablesung: 0,01mm Datenausgang: RB 5 Ablesung in Inch/Zoll: 0,0005 Genauigkeit: 0,06mm Länge: 730mm Besonderheiten Ausführung: digital Material: Messschiene aus Aluminium (30x7,9mm) Anzeige: mit EIN/AUS-, mm/inch- und NULL-Taste Messsystem: kapazitiv waagerecht Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com Worauf es beim Messschieberkauf ankommt: Neben Genauigkeit und Messbereich spielen Zusatzfunktionen wie Datenausgang oder Messkraftkontrolle eine wichtige Rolle. Der Gebrauch eines Messschiebers mit präzise abgestimmter Messkraft erweist sich insbesondere im Bereich der Qualitätssicherung und innerhalb von Laboren als vorteilhaft. Außerdem sollte man untersuchen, ob ein kalibrierter Messschieber sinnvoll ist. Die Kalibrierung kann direkt bei Auslieferung erfolgen und muss für die Prozesssicherheit alle 12 Monate wiederholt werden. Pflegehinweis - damit Sie lange etwas von Ihrem Metav IndustryLine Einbaumessschieber haben: Einbaumessschieber leben viele Jahrzehnte, wenn du sie sauber, leicht eingeölt, korrekt gelagert und regelmäßig geprüft hälst. Vermeide aggressive Lösungsmittel oder dicke Ölschichten, wische nach jedem Einsatz mit einem fusselfreien Tuch nach, schütze die Führungen mit einem Mikrofilm aus Instrumentenöl (z. B. Starrett M-1), lagere das Werkzeug trocken in seinem Etui mit leicht geöffneten Messflächen – am besten mit einem Silicagel-Beutel – und überprüfe Nullpunkt, Messflächen und Gleitspiel nach ISO-Temperaturnorm (20 °C).
600mm Digital Installation Caliper Absolute, External Display 0.01mm Resolution, Steel Beam, Magnetic Back, 2×CR2032 Battery, Cable Included - Metav IndustryLine
Take advantage of the combination of a 600 mm measuring range, a 0.01 mm resolution and a robust steel beam for reliable measurements of larger components; order the instrument directly via Metav Werkzeuge or consult the Metav team for integration advice. Digital Built-in Caliper ABS M218.277 (600 mm) — separate display, 0.01 mm resolution by Metav IndustryLine Digital Built-in Caliper ABS M218.277 is an embedded digital caliper with a separate display, intended for panel or remote mounting in workshop and production environments Separate remote display for panel mounting 0.01 mm resolution for precise readings Steel measuring beam for robust stability Preset and hold function; magnetic rear Precision that supports consistent quality control The instrument combines an absolute measuring system with a fine 0.01 mm display step to deliver repeatable readouts for routine checks and production sampling. The specified accuracy of ±0.05 mm is designed to meet practical workshop tolerances for larger assemblies, so dimensional decisions can be made with documented confidence. The integrated ability to show results in mm, inch and fraction format reduces conversion errors at the point of inspection and speeds decision‑making in mixed‑unit processes. Simple integration and reliable data transfer A separate, panel‑mountable display accommodates visibility where space or ergonomics make a transducer‑mounted readout impractical. The caliper offers digital outputs RB 6 and Micro‑B, enabling direct connection to data loggers or quality software; an approx. 2 m connection cable is supplied to simplify initial installation. Power is provided by 2x CR2032 batteries and remote readout reduces vibration transfer to the measuring head, improving long‑term repeatability when the instrument is incorporated into a test station. Designed for measurements beyond standard shop lengths With a measuring range of 600 mm, this tool falls into the long‑bar category for larger fixtures, housings and tooling components where beam stiffness is crucial for reproducible results. The steel measuring beam increases profile rigidity along the full travel, reducing sag and maintaining alignment across the span. At a practical weight of around 1.6 kg, the unit balances robustness and manageability for fixed installations or occasional manual handling during set‑up. Practical features that speed routine inspection Convenience functions such as measurement preset and hold and a magnetic rear for temporary attachment reduce handling time during repetitive checks. The instrument’s absolute encoder means no homing is required after battery changes, so processes resume quickly and measurement traceability is preserved. Built‑in adaptability—readable in multiple units and compatible with standard data outputs—supports both standalone checks and integration into automated recording workflows, helping to streamline inspection steps on the shop floor. Contact Metav Werkzeuge today to discuss integration options for the M218.277 and secure a production‑ready measuring solution tailored to larger components Technical data Article number: M218.277 GTIN: 4054469163918 ECLASS: 21170344 Display modes: mm / inch / fraction Facts Measuring range: 0–600 mm Resolution: 0.01 mm Accuracy: ±0.05 mm Weight: 1.6 kg Power: 2x CR2032 batteries Special features Separate remote display (panel mounting) Absolute measuring system Steel measuring beam Preset and hold function Rear magnet for temporary fixturing Data output: RB 6 and Micro‑B Connection cable approx. 2 m included FAQ Is this caliper suitable for workshop quality control of larger components? The Digital Built‑in Caliper ABS M218.277 from Metav IndustryLine is specifically configured for larger workshop tasks, offering a 600 mm span and a steel measuring beam to maintain stiffness and repeatability on bigger parts. How precise are the readings and what tolerance can be expected? Readouts are delivered at 0.01 mm resolution with a practical accuracy specification of ±0.05 mm, making the M218.277 appropriate for routine production checks where that level of tolerance is required. Can measurement data be exported to a PC or logger? Yes. The unit provides RB 6 and Micro‑B digital outputs for direct data capture; the package includes an approx. 2 m connection cable to simplify initial connection to data acquisition devices. Does the caliper require homing after battery replacement? The built‑in absolute measuring system in the M218.277 retains the reference position, so no homing cycle is required after battery replacement and measurement continuity is preserved. Which ergonomic or handling aids are included for repeated inspections? The instrument features a preset and hold function and a magnetic rear for temporary attachment, both intended to reduce handling time and increase consistency during repeated measuring tasks with the M218.277. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
600mm Digital Precision Caliper With 150mm Jaws, Inductive Readout, Fine Adjustment, IP65 Protection - Metav IndustryLine
Take advantage of the combination of 600 mm measuring range, robust IP65 protection and a precise fine-adjustment drive for consistent workshop measurement. Order the tool directly via Metav Werkzeuge or contact our consultants for application advice. Digital workshop caliper M217.124 — 600 mm, IP65 (Metav IndustryLine) Digital workshop caliper M217.124 is a large-range digital caliper designed for workshop and industrial measurement tasks up to 600 mm, equipped with an inductive sensor and a fine-adjustment thumb wheel for repeatable, controlled readings 600 mm measuring range for large components IP65 dust and splash protection Inductive measuring system for stable readings Fine-adjustment thumb wheel for precise positioning Consistent, shop-ready measurements for large parts The caliper is built as a large-range instrument (measuring range 0–600 mm) to bridge workshop needs where reach and rigidity are essential. A fully hardened stainless steel beam provides the structural stiffness required for measurements over longer spans, reducing deflection and improving reproducibility. The inductive measuring system delivers stable sensor output even in environments with oil or metal dust, while the stated general accuracy of 0.05 mm ensures dependable indication for routine quality checks. These characteristics translate into fewer re-measurements, less scrap and a smoother production flow. Faster inspections with precise positioning and clear digital output Measurements are read on a clear digital display with mm/inch switching and practical keys (HOLD, SET, ON/OFF, 0/INC, DATA), enabling quick toggling and temporary value freezing during inspection cycles. The integrated fine adjustment thumb wheel permits micro‑positioning of the jaws for reliable contact without overshoot; combined with a jaw length of 150 mm, it is suited to larger features and stepped profiles. The instrument’s resolution of 0.01 mm supports fine tolerance work while the RB 6 data output facilitates logging and traceable data capture in connected measurement routines. Designed for workshop durability and straightforward integration With IP65 ingress protection and a robust, hardened stainless construction, the caliper tolerates typical workshop stresses while remaining low-maintenance. The instrument classifies as a large-range caliper (500–1,000 mm category), meaning it is especially useful for fixtures, housings and larger machined parts. The moderate weight (1.2 kg) balances handling with stability during single-person operation. Supplied as a digital measuring solution, the device is ready for integration into inspection workflows and can be combined with data acquisition systems via the RB 6 interface to support traceability and process control. For specification support or ordering of the Metav IndustryLine digital caliper M217.124, contact Metav Werkzeuge for tailored advice at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: M217.124 GTIN: 4054469146881 Weight: 1.2 kg Material: stainless steel, fully hardened Measuring range: 0–600 mm Core technical values Resolution: 0.01 mm Indicated accuracy: 0.05 mm Jaw length: 150 mm Protection class: IP65 Special features Inductive measuring system Fine-adjustment thumb wheel Digital display with mm/inch, HOLD, SET, ON/OFF, 0/INC, DATA Data output: RB 6 Suited for workshop and industrial inspection FAQ What measuring range does this caliper cover? The digital workshop caliper M217.124 covers a measuring range of 0–600 mm, making it suitable for large components and assemblies. How precise is the digital display? Resolution on the display is 0.01 mm with an indicated general accuracy of 0.05 mm for the M217.124, suitable for standard workshop and metalworking quality checks. Is the caliper suitable for use in oily or dusty environments? Yes. The inductive measuring system combined with IP65 protection means the caliper is resistant to dust and splash water typical of workshop environments. Can measurement data be exported for documentation? Measurement values can be output via the RB 6 data interface and the device offers a DATA key for straightforward data capture. What advantages does the fine-adjustment drive offer? The fine-adjustment thumb wheel provides controlled jaw movement for precise contact and repeatable positioning, reducing operator-induced variation during inspection. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
600mm Digital Precision Caliper With 150mm Probe, Fine Adjustment, Inductive System, IP65, Stainless Steel - Metav IndustryLine
Take advantage of the combination of IP65 protection, a 600 mm measuring range and a precise fine-adjustment mechanism for reliable workshop measurement of long components. Order the caliper directly via Metav Werkzeuge or request assistance from our consultants if further specification is required. Digital workshop caliper M217.134 — 600 mm, IP65, Metav IndustryLine The Digital workshop caliper M217.134 is a robust 600 mm digital caliper with fine adjustment and inductive measurement for workshop and production use. Robust IP65 protection for workshop use Inductive measuring system, accurate readout Fine-adjustment thumb screw for controlled setting Supplied in protective transport case Precision and repeatability for long components The instrument is engineered for demanding measurement tasks on larger parts: with a 600 mm measuring range it falls into the long‑bar category (“Mit Gross”, 500–1,000 mm), offering the reach required for housings, fixtures and longer workpieces while maintaining handling comfort. The inductive measuring system reduces wear on the scale and delivers stable readings; combined with a standard 0.01 mm resolution, the caliper provides repeatable numerical results that serve both workshop quality control and production routines. This technical setup supports faster decision-making on the shop floor and reduces rework by showing exact deviations at a glance. Robust construction for harsh environments Constructed from stainless steel, fully hardened, the instrument resists the mechanical stresses and abrasions common in metalworking environments. The housing and slider are sealed to IP65, ensuring splash and dust protection so that on‑site contamination does not compromise measurements. The robust build gives confidence when measuring in busy production areas or outdoors by the machine, supporting continuous use without frequent readjustments or downtime due to ingress-related faults. Controlled measurement and easy data transfer A dedicated fine‑adjustment thumb screw permits controlled approach and minimal overshoot when setting jaws on the workpiece, which is especially useful when measuring delicate surfaces or tight fits. The digital display offers mm/inch switching together with HOLD, SET, ON/OFF, 0/INC and DATA functions for flexible handling. For integration into data capture systems, the caliper includes an RB 6 data output, enabling collection of measured values for SPC, production logs or QC documentation and thus streamlining traceability in the production chain. Designed for everyday workshop productivity Ergonomic jaw geometry (150 mm tip length) and a weight of approximately 1.2 kg make the instrument practical for single‑operator use on benches and fixtures. Supplied in a protective transport case, the caliper is ready for storage and shipment, reducing risk of transit damage. Combined robustness, clear digital feedback and a reliable data interface position this measuring tool as a pragmatic choice for workshops needing long‑range accuracy without complex setup. For tailored advice on integrating the Metav IndustryLine digital caliper M217.134 into existing inspection routines, contact Metav Werkzeuge for a practical consultation and parts selection. Technical data Article number: M217.134 GTIN: 4054469146911 Manufacturer: Metav IndustryLine Facts Measuring range: 0–600 mm Resolution: 0.01 mm Weight: 1.2 kg Jaw (tip) length: 150 mm Protection class: IP65 Special features Inductive measuring system Digital display with mm/inch, HOLD, SET, ON/OFF, 0/INC, DATA keys Fine‑adjustment thumb screw Fully hardened stainless steel construction Supplied in protective transport case Data output: RB 6 FAQ What measuring range does the caliper cover and how is it classified? The caliper covers 0–600 mm and is classified in the “Mit Gross” range (500–1,000 mm), suited to long‑bar measurements for fixtures and housings. Is the instrument protected against coolant and dust? Yes. The caliper has an IP65 rating, which protects the measuring system and electronics against dust and low‑pressure water jets often encountered in workshop environments. What resolution and accuracy can be expected from the display? The digital display provides a 0.01 mm resolution with stable readings from the inductive measuring system, making it suitable for standard workshop quality control tasks. Does the caliper support data collection for SPC or documentation? Yes. The instrument features an RB 6 data output for connection to data loggers or SPC systems, simplifying documentation and traceability. Is the fine‑adjustment useful for delicate measurements? The fine‑adjustment thumb screw allows controlled positioning of the jaws, which is particularly beneficial when measuring delicate parts or achieving consistent contact force. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
600mm Digital Precision Caliper With Separate Display 0.01mm, Aluminium Beam, Capacitive System - Metav IndustryLine
Take advantage of the combination of a 600 mm aluminium measuring beam, a capacitive measuring system and 0.01 mm resolution for dependable large-range measurements; order directly via Metav Werkzeuge or consult the specialists as required. Digital Built-in Caliper M218.267 — 600 mm aluminium beam, 0.01 mm resolution (Metav IndustryLine) The Digital Built-in Caliper M218.267 is a panel-mountable precision caliper for large-format workshop and fixture measurements, offering a robust aluminium profile beam and a separate readout for flexible installation. 0.01 mm resolution for fine readings 600 mm aluminium measuring beam Capacitive measuring system for stable output Separate display with mm/inch and ABS Long-range measurement capacity for heavy assemblies The instrument is designed as a large-range caliper with a measuring span of 600 mm, placing it in the category of long-beam calipers intended for sizeable components in fixture, mould and heavy metalworking applications. The aluminium measuring beam gives a favourable stiffness-to-weight ratio, helping to keep handling manageable while preserving straightness over the full length. This combination is particularly suited to workshops that require extended reach without a significant increase in tool bulk. Precise digital readout and stable sensing technology Featuring a resolution of 0.01 mm and a stated accuracy of 0.08 mm, the unit uses a capacitive measuring system that delivers repeatable readings in standard workshop environments. The external digital readout includes ON/OFF, ZERO, mm/inch, ABS and SET functions for straightforward operation and quick unit conversion; the inch resolution is 0.0005 in. The capacitive sensor principle reduces susceptibility to mechanical backlash and offers stable, low-drift measurement signals compared with purely mechanical scales. Flexible installation and ergonomic handling As a built-in design with a separate display, the caliper allows the display to be positioned for optimal visibility while the beam remains secured in a machine or fixture. The measuring beam, formed from an aluminium profile, reduces thermal mass and lowers the risk of heat-induced drift during prolonged work cycles; the instrument weight is 0.45 kg, which eases handling during installation. The separate display and compact reader give system integrators freedom to mount the electronics where access and readability are best. Practical application scenarios and lifecycle considerations Typical uses include dimensional checks on large housings, set-up measurement on jigs and fixtures, and inline quality control where a compact readout is required away from the measurement axis. The digital nature of the caliper supports quick changeover between metric and imperial units and fast zeroing for repeat operations, reducing measurement time per part. Routine maintenance is limited to keeping the beam and jaws clean and protecting the display from impacts; the capacitive system minimises mechanical wear compared with sliding-contact solutions. For specification checks, system integration advice or to discuss bulk procurement of the Metav IndustryLine M218.267 built-in caliper, contact Metav Werkzeuge in Emmerich — phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: M218.267 GTIN: 4054469163871 EClass: 21170344 Customs tariff number: 90173000 Numbers / Core technical data Measuring range: 0–600 mm Resolution: 0.01 mm Inch resolution: 0.0005 in Accuracy: 0.08 mm Weight: 0.45 kg Special features / Versions Measuring rod material: aluminium profile Measuring system: capacitive Display: separate external digital readout Display functions: ON/OFF, ZERO, mm/inch, ABS, SET Product type: digital built-in caliper Category: calipers FAQ What is the measuring range of the caliper? The Metav IndustryLine M218.267 has a measuring range of 0–600 mm, suitable for long-beam measurement tasks. What resolution and accuracy does the instrument offer? The caliper provides a resolution of 0.01 mm with a stated accuracy of 0.08 mm for the declared range. Can the readout switch between metric and imperial units? Yes — the separate display on the M218.267 includes a mm/inch function and the inch resolution is 0.0005 in. Is the device intended for built-in or panel mounting? The M218.267 is a built-in design with a separate display, enabling panel or remote mounting of the readout while the aluminium beam is fixed in the measurement position. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
600mm Digital Workshop Caliper Carbon Frame 300mm Jaw Length IP65, Bluetooth, CR2032 Battery, Supplied in Case - Filetta
Take advantage of a robust combination of carbon‑fibre construction, steel measuring faces and reliable data transfer via Digimatic and Bluetooth to speed up workshop measurement tasks and reduce rework. Order the caliper directly via Metav Werkzeuge or consult our specialists for integration advice. Filetta Digital Workshop Caliper M910.344 — carbon body, 0–600 mm, 300 mm jaw length The Filetta Digital Workshop Caliper M910.344 is a long‑range digital caliper designed for large workshop components and industrial measurement tasks, pairing a lightweight carbon‑fibre beam with hardened steel measuring faces for repeatable results. Carbon‑fibre beam with steel faces IP65 protection for harsh environments Digimatic and Bluetooth data output 300 mm long jaws for deep reaches Fine adjustment and locking screw Durable construction for dependable workshop use The long‑span design combines a carbon‑fibre beam with steel measuring faces, which reduces weight without sacrificing the contact rigidity required for repeatable readings. Built to the 500–1,000 mm class of calipers, this instrument is intended for larger components where profile stiffness matters over the full measuring length. An IP65 rating guards electronics and slides against dust and water jets, keeping maintenance overhead low in busy production environments. Fast, traceable measurement workflow with modern outputs Equipped with both Digimatic and Bluetooth data outputs, the instrument supports immediate transfer to data loggers or SPC systems, accelerating quality documentation and minimising transcription errors. The digital display offers mm/inch switching, ABS/INC modes and a Reset/Preset function, while the readout resolution is 0.01 mm, enabling efficient inspection routines. Combining electronic transfer with a mechanical locking screw and fine‑adjustment control keeps measurements stable and reproducible during capture. Practical handling, delivery and operating details The caliper operates with a single CR2032 battery and is tuned for a measuring force of 5–10 N, a range that balances tactile control with consistent contact pressure. Long jaws of 300 mm reach into deeper slots and pockets, while the overall length of 826 mm and weight of 1.5 kg remain manageable for one‑person handling or two‑person tasks where required. Delivery includes a protective transport case and the instrument’s robust sliding mechanism simplifies everyday shop use without constant recalibration. Discuss the Filetta M910.344 with Metav Werkzeuge for a tailored supply and integration plan — contact Metav Werkzeuge in Emmerich to confirm suitability and delivery options Technical data Article number: M910.344 Manufacturer: Filetta Label: Digital‑workshop caliper carbon 0–600 mm and 300 mm jaw length Battery: 1x CR2032 Protection class: IP65 Material: Carbon fibre with steel measuring faces Measuring range: 0–600 mm Total length: 826 mm Weight: 1.5 kg Core specifications Readout resolution: 0.01 mm Accuracy: 0.12 mm Jaw length: 300 mm Measuring force: 5–10 N Features and functions Digital display with mm/inch, ABS/INC, On/Off, Reset/Preset Data output: Digimatic and Bluetooth Fine adjustment mechanism Locking screw for fixed measurements Delivered in protective transport case FAQ What is the measuring range and accuracy of the caliper? The Filetta Digital Workshop Caliper M910.344 measures from 0 to 600 mm with an accuracy of ±0.12 mm and a readout resolution of 0.01 mm. How can measurement data be transferred from the instrument? Data can be output via Digimatic interface or Bluetooth, allowing the Filetta caliper M910.344 to feed measurements directly into SPC or data‑collection systems. Is the instrument suitable for workshop conditions? Yes — the carbon‑fibre beam with steel faces, IP65 protection and a protective transport case make the Filetta M910.344 well suited for workshop and shop‑floor environments. What additional handling features improve measurement consistency? The caliper includes a fine‑adjustment control and a locking screw, and it maintains consistent contact pressure within the 5–10 N measuring force range to reduce operator‑induced variance. Manufacturer / Responsible: Schut Geometrische Meettechniek bv; Duinkerkenstraat 21; 9723 BN Groningen; The Netherlands; +31 50 5877877; schutnl@schut.com
600mm Digital Workshop Caliper With 200mm Pointed Jaws, Fine Adjustment, Inductive System, IP65, Stainless Steel - Metav IndustryLine
Take advantage of the combination of IP65 protection, 600 mm measuring range, and inductive digital readout for reliable workshop measurement; order via Metav Werkzeuge or ask their consultants for tailored advice. Digital workshop caliper M217.134.1 — Metav IndustryLine, 600 mm range, IP65 the Digital workshop caliper M217.134.1 is a robust measuring instrument designed for heavy workshop use and medium-format components, combining a long measuring range with industrial sealing and a fine-adjustment mechanism IP65 dust and splash protection 600 mm measurement range Inductive digital measuring system Hardened stainless-steel construction Robust protection for workshop environments The caliper’s IP65 rating provides dependable resistance to dust ingress and water jets, making it suitable for busy machine shops and on‑site measurement where contamination or coolant spray is common. Thanks to the sealed electronics and the inductive measuring system, the instrument maintains stable readouts even in harsher environments, reducing downtime caused by sensor faults. This robustness supports a continuous production flow and less frequent instrument maintenance, which is particularly valuable for industrial metrology applications. Extended reach with workshop-grade rigidity With a measuring range of 0–600 mm, this instrument sits in the category for larger workshop calipers, ideal for medium assemblies such as housings, fixtures and larger machined parts. The combination of a long measuring span and a hardened stainless‑steel frame preserves straightness and repeatability across the full travel, so measurements remain reproducible. The relatively long jaw length (200 mm) helps when accessing deeper features while maintaining sufficient stiffness to keep results dependable. Precise readout and convenient operation The digital display offers a resolution of 0.01 mm and an inch equivalent readout, providing clear, actionable numbers for quality checks and production records. The display features mm/inch, HOLD, SET, ON/OFF, 0/INC and DATA controls, enabling quick unit changes, temporary freezing of readings and data output for traceable documentation. The fine‑adjustment mechanism grants smooth, controlled motion for exact jaw positioning—especially useful when measuring delicate fits or thin-walled parts—while the inductive system reduces wear-prone mechanical contacts. Practical delivery and data handling The instrument is supplied ready for workshop use in a protective transport case, which simplifies storage and safe handling between job sites. Data output via RB 6 is provided for external logging or integration with inspection software, supporting digital quality workflows and reducing transcription errors. The caliper’s weight of about 1.2 kg balances handheld usability with structural robustness, and the stainless‑steel, fully hardened construction ensures long service life under regular industrial use. Contact Metav Werkzeuge for advice on integrating the Metav IndustryLine caliper into existing inspection routines and to arrange delivery from Emmerich; email info@metav-werkzeuge.com or call +49 2822 7131930 for personalised support Technical data Article number: M217.134.1 GTIN: 4054469164847 Weight: 1.2 kg Material: hardened stainless steel Protection: IP65 Measuring system: inductive Display functions: mm/inch, HOLD, SET, ON/OFF, 0/INC, DATA Facts Measuring range: 0–600 mm Resolution: 0.01 mm Readout (inch): 0.0005 in Jaw length: 200 mm General tolerance: 0.06 mm Special features Fine adjustment mechanism Inductive, non-contact measurement Data output: RB 6 Supplied in transport case Robust workshop design FAQ What measuring range does the caliper cover? The Metav IndustryLine digital workshop caliper covers a measuring range of 0–600 mm, suitable for medium and larger workshop components. Is the instrument protected against coolant and dust? Yes. The caliper is rated IP65, offering protection against dust ingress and low-pressure water jets typical in workshop environments. What resolution and readout options are available? The display provides a resolution of 0.01 mm and an inch readout to 0.0005 in; the display supports mm/inch switching, HOLD, SET, ON/OFF, 0/INC and DATA functions. Can measurements be exported to a PC or data logger? Data output is available via RB 6, allowing recorded values to be transferred for documentation or quality‑control systems. Is the caliper suitable for precision laboratory use? The instrument is engineered for workshop and industrial inspection tasks where durability and practical accuracy are key; for sub‑micron laboratory applications, purpose‑built high‑precision instruments would be more appropriate. What does the transport case include? The caliper is supplied in a transport case to protect the instrument during storage and handling; the case is intended for safe transport rather than long‑term climate‑controlled storage. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
600mm Digitaler Einbaumessschieber, 0,01mm, IP 67, Big Screen Swiss Electronics - Microtech Metrology
Präzise Ablesung, robuste Schutzart und ein großzügiger Messbereich verbinden sich zu einem verlässlichen Einbaumesssystem. Die Kombination aus IP 67, digitaler Anzeige und einer Ablesung von 0,01 mm sorgt für reproduzierbare Messwerte in der Produktion. Bestellen Sie den Einbaumessschieber direkt über Metav Werkzeuge oder fragen Sie unsere technische Beratung bei Bedarf an. Einbaumessschieber von Microtech Metrology Der Einbaumessschieber ist ein einbaufähiger digitaler Messschieber für präzise Längenmessungen und industrielle Einbauanwendungen bis 600 mm. Einbaumessschieber von Microtech Metrology Schutzart IP 67 für raue Umgebungen Big Screen Swiss Electronics Display Messbereich bis 600 mm für Großbauteile Ablesung 0,01 mm, Genauigkeit 0,04 mm Robuste Einbaumontage für wiederholbare Prozesse Der Einbaumessschieber wurde für feste Einbausituationen konstruiert und ermöglicht eine dauerhafte Integration in Messstationen oder Fertigungsautomaten. Durch die Schutzart IP 67 bleibt die Elektronik gegen Staub und zeitweiliges Untertauchen geschützt, was Ausfallzeiten reduziert und die Wartungsintervalle verlängert. Die Einbaumontage gewährleistet zudem eine konstante Lagebeziehung zur Messgeometrie, sodass wiederholbare Messungen über längere Produktionsläufe möglich sind. Diese Eigenschaften machen das Gerät besonders geeignet für Anwendungen, bei denen Messdaten zuverlässig und unter rauen Bedingungen anfallen. Klare digitale Ablesung und nachvollziehbare Genauigkeit Mit einer Ablesung von 0,01 mm und einer angegebenen Genauigkeit von 0,04 mm unterstützt der Einbaumessschieber präzise Prüfabläufe im Qualitätswesen. Die Big Screen Swiss Electronics Anzeige bietet eine gut ablesbare Darstellung von Messwerten, was Fehler bei der Datenaufnahme verringert. Für Anwender ohne spezialisiertes Messlabor erklärt sich die Ablesung als kleinster Anzeigezuwachs auf dem Display, während die Genauigkeit die zu erwartende maximale Abweichung gegenüber dem Referenzwert beschreibt. Dadurch lassen sich Toleranzen besser planen und Nacharbeit reduzieren. Für welche Einsätze dieses Messgerät konzipiert ist Der Messbereich bis 600 mm positioniert den Schieber in der Kategorie Mit Gross, also für großformatige Komponenten und Baugruppen. Typische Anwender sind Fertigungsbetriebe im Maschinenbau, Vorrichtungsbau und Rohrleitungsbau, die Bauteile im mittleren bis großen Maßbereich prüfen müssen. Durch die digitale Schnittstelle und das Einbaukonzept lassen sich Messstationen effizient gestalten; Prüfroutinen werden beschleunigt und dokumentierbar. Somit trägt das Messgerät zur Prozesssicherheit und zur Minimierung von Ausschuss bei. Langlebigkeit, Bedienkomfort und Lieferkette Die Kombination aus robuster Bauart, digitaler Anzeige und bewährter Fertigung bei Microtech Metrology sorgt für einen langlebigen Einsatz im industriellen Alltag. Die Konstruktion ist auf dauerhaftes Einbauen ausgelegt, wobei die Schutzklasse IP 67 einen Schutz gegen Umwelteinflüsse bietet. Durch die klare Anzeige und standardisierte Messwerte lässt sich das Gerät gut in bestehende Prüfprozesse integrieren und mit Peripherie verbinden. Metav Werkzeuge als Vertriebspartner unterstützt die Versorgung mit Ersatzteilen und ergänzt das Angebot durch eine verlässliche Logistik für die Werkstatt und die Produktion. Für präzise Einbaumessungen empfiehlt sich der Einbaumessschieber von Microtech Metrology – Beratung und Lieferung direkt über Metav Werkzeuge, E‑Mail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 Produktmerkmale Artikelnummer: 142506147 Marke: Microtech Metrology Bezeichnung: Einbaumessschieber GTIN: 4061905459696 Digitalanzeige: Big Screen Swiss Electronics Schutzart: IP 67 Fakten Ablesung: 0,01 mm Genauigkeit: 0,04 mm Messbereich: 0–600 mm Messbereich (max): 600 mm Messbereich (min): 0 mm Besonderheiten Digitales Messgerät Einbaufähiges Design Schutzart: IP 67 Big Screen Swiss Electronics Display FAQ Für welche Bauteile eignet sich dieser Messschieber am besten? Der Einbaumessschieber eignet sich für Bauteile und Baugruppen bis 600 mm, besonders in Bereichen des Maschinenbaus und Vorrichtungsbaus, wo ein robuster Einbau und wiederholbare Messungen erforderlich sind. Wie genau sind die Messergebnisse des Geräts? Die Ablesung beträgt 0,01 mm, die angegebene Genauigkeit liegt bei 0,04 mm; mit dieser Kombination liefert der Einbaumessschieber verlässliche Werte für die Fertigungs‑ und Prüfqualität. Ist das Gerät für den Einsatz in staubiger oder feuchter Umgebung geeignet? Ja, durch die Schutzart IP 67 ist die Elektronik gegen eindringenden Staub und zeitweiliges Untertauchen geschützt, wodurch der Einbaumessschieber in rauen Fertigungsumgebungen einsetzbar ist. Kann das Messsystem fest in eine Prüfstation eingebaut werden? Der Einbaumessschieber ist als Einbauausführung konzipiert und lässt sich dauerthaft in Prüfstationen oder Maschinen integrieren, um reproduzierbare Lagebeziehungen und Messabläufe zu gewährleisten. Welche Identifikationsnummer hat dieses Produkt für Bestellungen? Für Bestellungen und Nachfragen wird die Artikelnummer 142506147 verwendet; Hersteller ist Microtech Metrology. Hersteller: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine; tool@microtech.tools
600mm Digitaler Messschieber, 0,01mm Auflösung, IP 67, Wireless, Swiss Electric Display, ISO 17025 Kalibrierung - Microtech Metrology
Die Kombination aus Genauigkeit 0,03 mm, Wireless-Datenübertragung und ISO 17025 Kalibrierschein sorgt für zuverlässige Messergebnisse und dokumentierbare Qualität. Nutzen Sie diese Eigenschaften für standardisierte Prüfprozesse und bestellen Sie das passende Messwerkzeug direkt über Metav Werkzeuge oder fragen Sie bei Bedarf die technische Beratung an. Messschieber — Digitaler Messschieber von Microtech Metrology Der Messschieber ist ein digitaler Messschieber für präzise Außen-, Innen- und Stufenmessungen bis 600 mm mit robuster Bauweise und dokumentierbarer Kalibrierung. Digitalanzeige Swiss electric 14 mm Ablesung 0,01 mm, Genauigkeit 0,03 mm Messbereich 600 mm – Mit Gross Einordnung Wireless-Datenausgang für direkte Dokumentation ISO 17025 Kalibrierzeugnis inklusive Präzise Messergebnisse und nachvollziehbare Qualität Die digitale Anzeige mit einer Ablesung von 0,01 mm und die deklarierte Genauigkeit 0,03 mm ermöglichen reproduzierbare Messwerte für den Maschinenbau und die Produktionskontrolle. Durch das ABS-Messsystem werden Referenzpunkte zuverlässig verwaltet, was Messabläufe vereinfacht und Fehlerquellen reduziert. Für Anwender, die standardisierte Prüfprozesse umsetzen, ist die mitgelieferte ISO 17025 Kalibrierung ein klarer Vorteil, da sie die Rückverfolgbarkeit und die Akzeptanz der Messergebnisse gegenüber Prüfinstanzen und Kunden erhöht. Robuste Bauweise und Schutz für den Einsatz in Werkstattumgebungen Die Konstruktion mit einem Querschnitt von 23 x 6 mm und einer Schnabellänge von 100 mm sorgt für gute Führbarkeit bei längeren Messungen, ohne an Stabilität einzubüßen. Die Schutzklasse IP 67 erlaubt den Einsatz auch unter anspruchsvolleren Bedingungen mit Spritzwasser und kurzzeitigem Eintauchen, wodurch sich die Messtechnik in Fertigungshallen oder auf Montageeinsätzen bewährt. Das langlebige Materialbild und die praxisgerechte Geometrie reduzieren Verschleiß und sorgen für konstante Messbedingungen. Effiziente Datenerfassung und nahtlose Dokumentation Der integrierte Wireless-Datenausgang ermöglicht die sofortige Übertragung von Messwerten in Dokumentationssysteme oder auf mobile Endgeräte, was Nacharbeit reduziert und Prozesszeiten verkürzt. Die gut ablesbare Swiss electric Anzeige mit 14 mm Ziffernhöhe unterstützt die schnelle Kontrolle vor Ort. Für Betriebe, die Messdaten digital speichern und auswerten, bietet diese Funktion einen klaren Effizienzgewinn und erleichtert die Einbindung in Qualitätsmanagement-Prozesse. Einsatzbereich und Einordnung nach Messlänge Mit einem Messbereich von 600 mm gehört dieses Gerät zur Kategorie Mit Gross, die für großformatige Komponenten, Vorrichtungen und Serienbauteile ausgelegt ist. Diese Klasse vereint Reichweite und Profilsteifigkeit, sodass Messungen über die gesamte Länge reproduzierbar bleiben. Das Messgerät eignet sich daher für Werkstätten, Verzahnungsprüfungen und die spanende Fertigung, wo längere Schenkel erforderlich sind, ohne auf Ergonomie und Handhabung verzichten zu müssen. Empfehlung: Für reproduzierbare Prüfprozesse empfiehlt sich der Einsatz des Microtech Metrology Digitalmessschiebers mit ISO 17025 Kalibrierung; bei Fragen zur Anwendung oder zur Datenanbindung steht Metav Werkzeuge gern zur Verfügung — eMail: info@metav-werkzeuge.com, Telefon: +49 2822 7131930. Produktmerkmale Artikelnummer: 141073691 Marke: Microtech Metrology Bezeichnung: Messschieber GTIN: 4061905454639 Messsystem: ABS Fakten Genauigkeit: 0,03 mm Ablesung: 0,01 mm Messbereich: 0-600 mm Schnabellänge: 100 mm Querschnitt: 23x6 Besonderheiten IP 67 Schutzklasse: schutz gegen Eindringen von Staub und zeitweiliges Eintauchen Wireless: kabellose Datenübertragung Digitalanzeige: Swiss electric Ziffernhöhe 14 mm ISO 17025: Kalibrierzeugnis wird mitgeliefert Messbereich-Kategorie: Mit Gross FAQ Welche Genauigkeit liefert dieses Messgerät? Der Microtech Metrology Messschieber (Artikelnummer 141073691) bietet eine deklarierte Genauigkeit von 0,03 mm bei einer Ablesung von 0,01 mm, geeignet für Qualitätskontrollen im Maschinenbau. Ist ein Kalibrierzertifikat enthalten? Ja, der Messschieber von Microtech Metrology wird mit einem ISO 17025 Kalibrierzeugnis ausgeliefert, wodurch die Messergebnisse dokumentierbar und rückverfolgbar sind. Wie werden die Messwerte dokumentiert? Die Übertragung erfolgt per Wireless-Schnittstelle, sodass Messwerte direkt in Dokumentationssysteme exportiert oder mobile Geräte angesteuert werden können. Für welche Messlängen ist das Gerät geeignet? Mit einem Messbereich bis 600 mm ist der Messschieber der Kategorie Mit Gross zuzuordnen und eignet sich für längere Bauteile und Vorrichtungen in Fertigung und Montage. Ist das Gerät gegen Staub und Spritzwasser geschützt? Ja, die Schutzklasse IP 67 ermöglicht den Einsatz unter raueren Bedingungen mit Schutz gegen Staub und zeitweiliges Eintauchen. Hersteller: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine; tool@microtech.tools
600mm Digitaler Messschieber, Swiss Electric Display 0,01mm, IP 67, ISO 17025 Kalibriert - Microtech Metrology
Kombination aus ISO 17025 Kalibrierung, IP 67 Schutz und 0–600 mm Messbereich liefert präzise, reproduzierbare Messergebnisse für den Fertigungsalltag. Die 0,01 mm Ablesbarkeit und das robuste Gehäuse sorgen für dauerhafte Verlässlichkeit bei wiederkehrenden Prüfungen. Bestellen Sie das Gerät direkt über Metav Werkzeuge oder fragen Sie unsere Beratung bei Bedarf an. Messschieber – Digitaler Messschieber von Microtech Metrology Der Messschieber von Microtech Metrology ist ein kalibriertes, digitales Messinstrument mit hohem Schutzgrad und großer Reichweite für präzise Werkstatt‑ und Prüfaufgaben. Digitaler Messschieber mit IP67 Schutz Kalibriert nach ISO 17025 inklusive Kalibrierzeugnis Messbereich 0–600 mm für großformatige Bauteile Swiss electric Display mit 11 mm Ziffernhöhe Langlebigkeit und Schutz für anspruchsvolle Messaufgaben Die Konstruktion bietet IP 67 Schutz, was bedeutet, dass der Schieber staubdicht ist und gegen zeitweiliges Eintauchen geschützt ist. Diese Eigenschaft reduziert Ausfallzeiten durch Feuchtigkeit oder Schmutz in Werkstattumgebungen und verlängert die Standzeit des Geräts. Durch den robusten Querschnitt von 23x6 mm bleibt die Gleitschiene verwindungsarm, was die Reproduzierbarkeit von Messungen auch unter rauen Bedingungen erhöht. Präzision und Kalibrierung für verlässliche Ergebnisse Dank ISO 17025 Kalibrierung wird das Messinstrument mit einem offiziellen Kalibrierzeugnis ausgeliefert, das die Rückführbarkeit der Messergebnisse dokumentiert. Die Ablesbarkeit von 0,01 mm und die angegebene Genauigkeit von 0,03 mm machen das Gerät geeignet für Qualitätskontrolle und Fertigungsprüfung, wo nachvollziehbare Toleranzen erforderlich sind. Anwender profitieren von geringem Prüfaufwand und klaren Messwerten auf dem gut ablesbaren Display. Reichweite und Handhabung für große Werkstücke Mit einem Messbereich bis 600 mm fällt das Produkt in die Kategorie «Mit Gross», ideal für größere Spannmittel, Aufnahmen und Gehäuse. Die lange Schnabellänge von 100 mm erleichtert Greif‑ und Innenmessungen an tiefen Konturen. Das ABS Messsystem sorgt für stabile Nulleinstellungen und dauerhaft reproduzierbare Referenzpunkte, wodurch sich die Effizienz bei wiederholten Messläufen erhöht. Zielgruppenorientierte Einsatzfelder und Praxisnutzen Insbesondere für Maschinenbau, Vorrichtungsbau und Prüflabore ist das Instrument konzipiert, weil es große Bauteile präzise und dokumentiert messbar macht. Kleinere Fertigungsbetriebe profitieren gleichermaßen von der einfachen Ablesbarkeit und der robusten Ausführung, während Kalibrierlaboratorien die Nachweisführung über das mitgelieferte Zertifikat schätzen. Die Kombination aus Reichweite, Schutzklasse und Kalibrierung bietet einen klaren Nutzen für prozesssichere Fertigung. Mit dem kalibrierten Microtech Messschieber die Messsicherheit in Ihrer Fertigung steigern — direkt bei Metav Werkzeuge anfragen: info@metav-werkzeuge.com oder telefonisch +49 2822 7131930 Produktmerkmale Artikelnummer: 141073611 Marke: Microtech Metrology Bezeichnung: Messschieber GTIN: 4061905454875 Daten Messbereich: 0–600 mm Messbereich Max: 600 mm Ablesung: 0,01 mm Genauigkeit: 0,03 mm Schnabellänge: 100 mm Querschnitt: 23x6 mm Digital Anzeige: Swiss electric Digit Höhe 11mm Besonderheiten IP 67 — Staubdicht, Schutz gegen zeitweiliges Eintauchen ISO 17025 — Akkreditierte Kalibrierung, Kalibrierzeugnis liegt bei Messsystem: ABS — Achsbezugssystem für stabile Nullreferenz Digital — mit elektronischer Anzeige für einfache Ablesung FAQ Wie genau ist der Messschieber in der Praxis? Der Microtech Messschieber erreicht eine Ablesbarkeit von 0,01 mm und eine angegebene Genauigkeit von 0,03 mm, wodurch er für die meisten Qualitätskontrollen im Maschinenbau und in Prüflaboren geeignet ist. Wird der Messschieber kalibriert geliefert? Ja, der Messschieber von Microtech Metrology wird vollständig kalibriert ausgeliefert; das ISO 17025 Kalibrierzeugnis liegt dem Gerät bei und dokumentiert die Rückführbarkeit der Messergebnisse. Für welche Anwendungen eignet sich der Messschieber mit 600 mm Reichweite? Der Messbereich bis 600 mm macht das Gerät ideal für größere Komponenten wie Aufnahmen, Gehäuse oder Vorrichtungen im Vorrichtungs‑ und Formenbau sowie in der Serienfertigung. Wie widerstandsfähig ist das Gerät gegenüber Feuchtigkeit und Schmutz? Mit IP 67 Schutz ist das Gerät staubdicht und gegen zeitweiliges Eintauchen geschützt, was es für den robusten Einsatz in Werkstätten prädestiniert. Hersteller: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine; tool@microtech.tools
600mm Workshop Caliper With Pointed Jaws 200mm Depth 0.05mm Vernier Fine Adjustment Monoblock Inox, DIN 862 Box - Metav IndustryLine
Take advantage of a sturdy 600 mm measuring range together with a monoblock, hardened stainless steel frame and precise 0.05 mm vernier measurement for dependable workshop results; order the caliper directly via Metav Werkzeuge or contact our consultants for application advice. M201.336.1 Workshop Caliper with Point — 600 mm measuring range, 0.05 mm vernier — Metav IndustryLine M201.336.1 is a robust workshop caliper designed for large-format measurements in mechanical workshops and toolrooms, combining a long measuring range with a hardened monoblock construction for repeatable results. 600 mm measuring range Monoblock hardened stainless steel Fine-adjustment thumbwheel Dual vernier (1/128" / 1/20 mm) Built for heavy workshop use and reproducible results The long-range design classifies this tool as a large-range caliper (measuring range up to 1,000 mm), making it suitable where profile stiffness and reach matter. The one-piece monoblock frame reduces torsion and improves rigidity compared with multi-part assemblies, which supports consistent measurements across the full 600 mm stroke. The body is manufactured from hardened stainless steel and the scale is matt-chrome finished to reduce glare; together these features increase longevity under daily workshop conditions and lower the risk of corrosion or wear that would affect repeatability. Clear, reliable readings for mixed metric and imperial workflows The mechanical vernier provides a practical 0.05 mm resolution, matching common workshop accuracy expectations and enabling rapid checks without electronics. A dual vernier layout—1/128" on the upper scale and 1/20 mm on the lower—facilitates work on projects that require both imperial and metric references, reducing conversion errors and saving time at the bench. The integrated fine-adjustment thumbwheel allows controlled approach when closing the jaws, improving alignment and reducing overshoot; this combination supports efficient inspection routines and shortens process times in production checks. Practical handling and measurement versatility Pointed jaws extend the caliper’s capability for localised or recessed features, while a 200 mm jaw length gives a secure contact area for larger parts. Compliance with DIN 862 for the specified jaw length confirms that form and tolerances meet recognised workshop standards. The tool is balanced for single-person operation despite its length: the fine-adjustment control and smooth slide action make measured motions deliberate and repeatable, providing confidence when checking assemblies, fittings or machining setups. Contact Metav Werkzeuge for tailored advice on applications that benefit from a 600 mm monoblock caliper — our specialists in Emmerich will recommend the right solution and arrange supply of the M201.336.1. Technical data Article number: M201.336.1 GTIN: 4054469101774 Manufacturer: Metav IndustryLine eCl@ss: 21170344 Facts Measuring range: 600 mm Jaw length: 200 mm Resolution: 0.05 mm Vernier: 1/128" (top) and 1/20 mm (bottom) Customs tariff number: 90173000 Special features Material: hardened stainless steel, matt-chrome scale Monoblock frame construction Fine-adjustment thumbwheel Pointed jaws for localised contact DIN 862 (applicable for the stated jaw length) FAQ How accurate is the caliper for routine workshop checks? The M201.336.1 provides a mechanical resolution of 0.05 mm, which corresponds to standard industrial workshop practice and is well suited to general measurement and quality-control tasks. Can the vernier be used for imperial and metric readings? Yes; the caliper features a dual vernier—1/128" on the upper scale and 1/20 mm on the lower—so the M201.336.1 can be read directly in either system without on-the-fly conversions. Is the caliper suitable for larger components and assemblies? With a 600 mm measuring range the instrument is classified as a large-range caliper and is intended for larger components where reach and profile stiffness are required. Does the caliper meet recognised workshop standards? For the specified jaw length, the M201.336.1 conforms to DIN 862 requirements, ensuring consistent geometric and dimensional characteristics expected in professional environments. What practical advantages does the monoblock design give in everyday use? The monoblock frame reduces flex under load and improves stability over long spans; combined with the fine-adjustment thumbwheel, this leads to more reproducible contact positioning and fewer re-measures. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
600mm Workshop Caliper With Pointed Jaws Fine Adjustment Monoblock 0.05mm, Hardened Stainless Steel, Case - Metav IndustryLine
Take advantage of robust monoblock construction, hardened stainless steel and precise fine adjustment to secure repeatable measurements across a 600 mm range; order the workshop caliper directly via Metav Werkzeuge or consult our technical advisors for application advice. Metav IndustryLine Workshop Caliper M201.336.2 — 600 mm range, fine adjustment The Metav IndustryLine Workshop Caliper M201.336.2 is a heavy‑duty, analogue monoblock caliper with a 600 mm measuring range, engineered for large workshop and machine‑building measurement tasks. 600 mm measuring range Hardened stainless steel construction Fine adjustment mechanism Dual vernier for precise readout Built for robust, long‑range workshop measurement The large‑format design places this instrument in the 500–1,000 mm class of calipers, where profile stiffness and repeatability over the entire length are essential. The monoblock frame minimises play and torsion, so measurements remain stable when handling larger workpieces such as fixtures, housings or long shafts. The hardened stainless steel body with a matt‑chromed scale protects the scale against wear while keeping contrast high for clear readings in busy workshop conditions. Precise analogue reading with vernier and fine feed The instrument combines a traditional vernier readout with a fine adjustment for controlled closing and repeatable positioning. The calibrated resolution of 0.05 mm supports reliable dimensional checks in routine production and maintenance. The vernier arrangement (dual scales) provides quick cross‑checks and familiar operation for technicians accustomed to mechanical callipers, while the fine feed reduces the risk of overshoot on delicate surfaces. Practical handling and measurement versatility Equipped for external, internal and step measurements, the device features pointed tips to reach narrow recesses and a jaw geometry suited to varied workshop tasks. The ergonomic slider and locking option maintain the set reading during transfer between stations, aiding workflow in busy shops. Compliance with DIN 862 for applicable jaw lengths ensures the caliper meets recognised mechanical measuring conventions; where jaw dimensions exceed standard limits, factory specifications apply. Application focus and quality of delivery This analogue caliper is directed at machine shops, toolrooms and maintenance departments that require a resilient instrument for larger components. The combination of a long measuring range, monoblock rigidity and hardened stainless construction makes it a solid choice where durability and repeatable results matter. For commissioning into inspection routines, the instrument integrates easily with existing quality processes thanks to its conventional operation and clear scale. Contact Metav Werkzeuge today to specify the Metav IndustryLine Workshop Caliper M201.336.2 for large‑format measurement tasks — our Emmerich team will advise on suitability and delivery to your site Technical data Article number: M201.336.2 GTIN: 4054469101781 ECLASS: 21170344 Tariff number: 90173000 Facts Measuring range: 0–600 mm Jaw length: 300 mm Resolution: 0.05 mm Analog instrument with vernier scales Special features Material: hardened stainless steel, matt‑chromed scale Monoblock design for increased stiffness Fine adjustment mechanism included Pointed tips for narrow recesses Norm: DIN 862 for specified jaw lengths FAQ What measuring tasks is this caliper best suited for? The Metav IndustryLine Workshop Caliper M201.336.2 is designed for workshop and machine‑building tasks that require a long measuring range and robust construction, such as checking housings, fixtures and long shafts. How precise is the vernier on this caliper? The analogue vernier offers a resolution of 0.05 mm and a dual‑scale arrangement that supports reliable repeatable readings for standard workshop quality control. Is the caliper suitable for internal and step measurements? Yes, the instrument supports external, internal and step measurements and is equipped with pointed tips to reach narrower features. Does the caliper comply with recognised standards? The caliper follows DIN 862 for applicable jaw lengths; for larger jaw configurations the device is supplied according to factory specifications. What materials and finish does the caliper feature? Constructed from hardened stainless steel with a matt‑chromed scale, the caliper is built for durability and high contrast in industrial environments. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
600mm Workshop Caliper With Pointed Jaws, Fine Adjustment, Monoblock, 0.05mm Vernier, Hardened Stainless Steel, Supplied In Case - Metav IndustryLine
Take advantage of the combination of a 600 mm measuring range, a hardened stainless-steel monoblock beam and a precision fine-adjustment screw to measure large workpieces reliably and efficiently. Order the Workshop caliper M201.336 directly via Metav Werkzeuge or contact our consultants for further advice. Workshop caliper M201.336 — 600 mm range, hardened stainless steel monoblock with fine adjustment A workshop caliper designed for large-format components, combining a 600 mm measuring range with a robust monoblock beam and fine-adjustment mechanism for dependable, repeatable readings. 600 mm measuring range Hardened stainless-steel construction Fine-adjustment screw for repeatable settings Monoblock beam for long-length stability Reliable measurement capacity for large components The caliper is built for workshop and fixture applications where reach and stiffness matter: its 600 mm measuring range places it in the large-range category (500–1,000 mm), which is optimised for handling bigger assemblies such as housings, fixtures and medium-sized mould components. The long beam, realised as a monoblock design, reduces flex and ensures measurements taken across the full length remain reproducible. The mechanical vernier arrangement provides an industrial-grade reading step of 0.05 mm, making the instrument suitable for typical machine‑shop tolerances without relying on batteries or electronics. Robust materials and repeatable operation Constructed from hardened stainless steel with a matt‑chromed scale, the caliper withstands shop-floor conditions and keeps its graduations legible even with regular handling. The fine-adjustment screw allows incremental closing and accurate repeat positioning of the jaws, which is especially useful when measuring awkward or heavy components that require careful alignment. Pointed jaw tips are included to reach narrow grooves or internal features; the longer jaw length of 150 mm gives extra reach for particular tasks while the solid build keeps alignment stable during use. Practical standards and workshop compatibility The instrument uses a traditional vernier system (top: 1/128" for inch readout; bottom: 1/20 mm for metric vernier) that combines inch and metric utility on the same scale. Compliance is managed via recognised norms: DIN 862 applies for shorter jaw variants up to 200 mm, while larger sizes are produced to the manufacturer's workshop standard for long-range instruments. The analogue design makes it a robust choice for heavy daily use and for environments where electronic readouts are unsuitable. Choose the Metav IndustryLine caliper M201.336 for long-range workshop measurement tasks and contact Metav Werkzeuge for tailored advice or to arrange a purchase from our Emmerich facility Technical data Article number: M201.336 GTIN: 4054469101767 ECLASS: 21170344 Category: Messschieber (calipers) Facts Measuring range: 600 mm Measuring range (min): 0 mm Jaw length: 150 mm Resolution/step (vernier): 0.05 mm Nonius/vernier: 1/128" (top) and 1/20 mm (bottom) Tariff code: 90173000 Special features Material: stainless steel, hardened, matt‑chromed scale Fine adjustment: yes Monoblock design: yes Particulars: with pointed tips Construction: analogue/vernier caliper Norms: DIN 862 (jaw length ≤ 200 mm) / factory standard for larger sizes FAQ What measuring range does the caliper cover? The caliper covers a measuring range of 600 mm, making it a large-range instrument suited to medium‑sized components and fixtures. Is the caliper suitable for workshop use and rougher environments? Yes. The hardened stainless-steel construction and matt‑chromed scale make the tool durable for daily workshop use. How precise is the vernier on this caliper? The vernier provides a metric step of 0.05 mm (1/20 mm) and an inch reading via 1/128", which matches common industrial tolerance requirements. Does the instrument include a fine-adjustment mechanism? Yes, the caliper is fitted with a fine-adjustment screw to set and repeat jaw positions precisely. Which standards apply to this caliper? Shorter jaw variants are covered by DIN 862 up to 200 mm; larger sizes, such as the 600 mm instrument, are produced to the manufacturer's workshop standard for long-range models. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
600mm Workshop Caliper Without Probe Fine Adjustment Monoblock Stainless Steel 0.05mm, DIN 862 - Metav IndustryLine
Take advantage of a robust 600 mm measuring range, hardened stainless construction and a precise fine-adjustment thumb screw to measure large components reliably; order the instrument directly via Metav Werkzeuge or contact their consultants for implementation advice. Workshop caliper M201.326.1 — 600 mm, fine‑adjustment, Monoblock (Metav IndustryLine) The Workshop caliper M201.326.1 is a heavy‑duty analogue caliper engineered for large‑format measurement tasks in machine shops and fixture production. 600 mm measuring range Hardened stainless steel construction Fine‑adjustment thumb screw Supplied in a protective case Reliable reach for large components The large 600 mm measuring range places this instrument in the category for big components, where repeatable reach and stiffness are decisive. The monoblock frame reduces relative movement between beam and jaw so that measurements remain reproducible across the full span. With a jaw length of 200 mm, the caliper provides secure engagement on large workpieces and offers improved leverage where deeper grips are required. This construction supports efficient workshop workflows by combining reach with manageable handling weight. Accurate workshop readings with mechanical vernier control This analogue caliper uses a dual vernier configuration (noted on the instrument as 1/128" top and 1/20 mm bottom), delivering a practical resolution of 0.05 mm suitable for standard industrial inspection in accordance with DIN 862 where applicable. The vernier layout is straightforward for trained staff and yields quick comparative checks without reliance on electronics, which can be an advantage in robust production environments or at dusty workstations. Durable materials and user‑friendly handling Manufactured from hardened stainless steel with a matt‑chromed scale, the caliper resists corrosion and everyday wear while maintaining legible graduations. The integrated fine‑adjustment thumb screw enables precise closing and positioning of the sliding jaw, reducing hand variability during setting. A solid finish and the monoblock design combine to lower the risk of flexure and maintain measurement integrity over repeated use, which contributes to lower rework rates and steadier production quality. Practical delivery and workshop integration The instrument is supplied in a protective case for secure transport and storage, which simplifies logistics for workshop use and on‑site measurement tasks. As an analogue tool it offers immediate readiness without batteries, and its simple mechanical design ensures straightforward maintenance routines. For applications requiring traceable calibration, Metav can advise on suitable calibration options and intervals to match quality management systems. Contact Metav Werkzeuge for tailored advice on integrating the M201.326.1 workshop caliper into production workflows and to confirm availability from stock in Emmerich Technical Data Article number: M201.326.1 GTIN: 4054469101538 Weight: 4.5 kg Measuring range: 0–600 mm Jaw length: 200 mm Facts Resolution (vernier): 0.05 mm Tariff number: 90173000 Compliance: DIN 862 (applies for jaw length up to 200 mm) Special features Hardened stainless steel; matt‑chromed scale Monoblock construction Fine‑adjustment thumb screw Analogue vernier (1/128" top, 1/20 mm bottom) Supplied in protective case FAQ What measuring range does this caliper cover? The Workshop caliper M201.326.1 covers a measuring range of 0–600 mm, designed for large components and assembly measurements. What accuracy and resolution can be expected? The vernier setup provides a practical resolution of 0.05 mm; in workshop practice this equates to the standard mechanical accuracy range suitable for machine‑shop inspections and routine quality checks. Is the instrument suitable for heavy or large workpieces? Yes — the monoblock frame, 600 mm reach and a 200 mm jaw length make the instrument appropriate for larger components where stiffness and repeatability matter. What materials and finish are used? The caliper is made from hardened stainless steel with a matt‑chromed scale for enhanced durability and clear readability under workshop conditions. What is included in the delivery? Delivery includes the workshop caliper M201.326.1 and a protective case for transport and storage Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
600mm Workshop Caliper Without Probe For Outside, Inside And Step Measurement, Hardened Stainless Steel, Fine Adjustment, Wooden Case - Metav IndustryLine
Combining a hardened stainless-steel construction, a 600 mm measuring range and a fine-adjustment screw provides stable, reproducible results on large workshop components; ideal where rigidity and repeatability matter. Order the caliper directly via Metav Werkzeuge or consult our specialists for application advice. Workshop Caliper M201.316 — 600 mm stainless steel, 0.02 mm vernier (Metav IndustryLine) A Workshop Caliper M201.316 engineered for long-reach external, internal and step measurements in heavy workshop and fabrication settings. 600 mm measuring range for large components Hardened stainless steel construction Fine-adjustment screw for precise setting Vernier scales with 0.02 mm resolution Repeatable precision for large components The caliper’s 600 mm measuring range places it in the long-bar category (500–1,000 mm), making it suitable for sizeable workpieces such as housings, fixtures and large fittings. The monoblock design increases profile stiffness across the entire beam, reducing deflection and helping to keep measurement uncertainty low when working at extended reach. The hardened stainless steel body with a matt‑chromed scale ensures resistance to corrosion and wear, which maintains accurate graduations even after prolonged workshop use. This combination supports consistent results in repetitive quality-control tasks and reduces rework. Engineered for robust workshop use and clear benefits Long jaws (150 mm) and a robust jaw geometry allow secure seating on external and internal edges as well as reliable step measurements; the caliper is specified for external, internal and step measurements. The mechanical construction avoids electronics, offering a maintenance‑free solution where ruggedness is essential. The factory standard (Werksnorm) build focuses on practical longevity: hardened measuring surfaces resist edge wear, while the matt finish minimises glare and simplifies reading under workshop lighting. For production environments that prioritise uptime and traceable routine checks, the tool’s mechanical simplicity and durability translate directly into lower operating risk. Precise analogue measurement with fine adjustment This analogue vernier instrument provides a metric reading resolution of 0.02 mm, derived from the vernier arrangement shown on the scale; the dual-scale arrangement also supports imperial reading via the 1/1000" marking for inch-based checking. The fine-adjustment screw allows the operator to approach the final measurement gently and lock the slider without overshoot, improving repeatability when measuring narrow tolerances. Because the caliper is purely mechanical, it requires no batteries and is immediately available for intermittent or continuous use in both shopfloor inspection and assembly operations. Clear graduations and tactile control make it especially suitable for skilled machinists and maintenance technicians who require direct, dependable measurement feedback. Contact Metav Werkzeuge today on +49 2822 7131930 or info@metav-werkzeuge.com to discuss application details or to secure the Metav IndustryLine 600 mm workshop caliper for in-house measuring tasks Technical Data Article number / SKU: M201.316 GTIN: 4054469101354 ECLASS: 21170344 Norm: Werksnorm Facts Measuring range: 0–600 mm Resolution: 0.02 mm Jaw length: 150 mm Nonius / vernier: 1/1000" (top) and 1/50 mm (bottom) Special features Monoblock design Fine-adjustment screw Hardened stainless steel with matt‑chromed scale Analogue vernier operation Suitable for external, internal and step measurements FAQ What measuring range does this caliper cover? The Workshop Caliper M201.316 covers a measuring range of 0–600 mm, placing it in the long‑bar category for larger components. What resolution and scales are available on the instrument? The caliper features a vernier resolution of 0.02 mm on the metric scale and an imperial reference of 1/1000" for inch‑based checks. Is the caliper suitable for internal and step measurements? Yes — the design is specified for external, internal and step measurements and includes elongated jaws (150 mm) to reach deeper features. Does the instrument require batteries or electronic calibration? No — this is an analogue vernier caliper with mechanical fine adjustment; it operates without batteries and is delivered to factory standard. What material and surface treatment are used for the measuring surfaces? The caliper is manufactured from hardened stainless steel with a matt‑chromed scale to improve wear resistance and readability. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
600mm Workshop Caliper Without Tip 0.05mm Resolution Fine Adjustment Monoblock, Hardened Stainless Steel 150mm Jaws - Metav IndustryLine
Benefit from a robust hardened stainless-steel monoblock design and the 600 mm measuring range with fine adjustment for repeatable workshop measurement results; order the caliper directly via Metav Werkzeuge or consult our advisors for specification support. M201.326 Workshop Vernier Caliper 0–600 mm — Metav IndustryLine, stainless steel, fine adjustment The M201.326 is a workshop vernier caliper designed for long-range dimensional checks in machine shops and fabrication environments, combining a rugged monoblock frame with a fine‑adjustment spindle for controlled positioning. 600 mm measuring range for large components Hardened stainless-steel monoblock construction Fine-adjustment spindle for precise positioning Dual vernier: 1/128" top and 1/20 mm bottom Long reach with workshop-grade stiffness This long-bar instrument offers a 600 mm measuring range that places it in the category for large-format workshop calipers, suitable where extended reach and stable guidance are required. The extended reach is paired with a jaw length 150 mm, which improves clamping contact on deeper workpieces and helps maintain alignment during measurement. Because the scale length is substantial, the design prioritises profile rigidity so measurements remain reproducible across the full span — an important consideration for fixtures, large assemblies and machine components that require consistent checks. Built to resist everyday workshop wear The measuring frame is made from hardened stainless steel with a matt-chrome scale, providing corrosion resistance and long service life under regular use. The monoblock construction reduces flex and wear at the sliding junction, while a precision-machined finish preserves the vernier alignment over time. A fine-adjustment spindle is integrated for small, controlled movements of the jaw, enabling exact seating before reading; this reduces operator-induced variation and speeds up routine inspection. The overall build quality supports frequent use in demanding industrial settings. Clear analogue reading and practical standard compliance The analogue vernier layout provides a clear dual-scale reading — 1/128" on the top and 1/20 mm on the bottom — delivering an effective resolution of 0.05 mm, which aligns with common workshop tolerances. The caliper is supplied to factory standard for sizes above 250 mm (norm reference: DIN 862 up to 200 mm), ensuring the instrument meets established mechanical requirements for vernier instruments while reflecting manufacturing adaptations for larger gauges. The simple, mechanical operation requires no batteries and is straightforward to integrate into existing QA routines where robust, repeatable checks are needed. For dependable long-range measurement with Metav IndustryLine quality, contact Metav Werkzeuge in Emmerich for supply or technical consultation at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M201.326 GTIN: 4054469101521 Manufacturer: Metav IndustryLine Facts Measuring range: 0–600 mm Resolution: 0.05 mm Jaw length: 150 mm Weight: 3.1 kg Scale finish: matt-chrome Nonius/vernier: 1/128" (top); 1/20 mm (bottom) Norm: DIN 862 up to 200 mm; factory standard above 250 mm Special features Monoblock frame Fine-adjustment spindle Hardened stainless-steel construction Analogue vernier caliper for workshop use Designed for large-component measurement FAQ What measurement range does this caliper cover? The M201.326 workshop vernier caliper covers a measuring range of 0–600 mm, suitable for large components and extended checks. What level of resolution and repeatability is provided? With a vernier arrangement that yields a resolution of 0.05 mm, the M201.326 offers workshop-grade repeatability appropriate for standard machine‑shop inspections. Which materials and finishes are used on the caliper? The M201.326 is made from hardened stainless steel with a matt-chrome scale, combining corrosion resistance with durable surface legibility. Is the caliper compliant with recognised standards? The instrument follows DIN 862 for sizes up to 200 mm; for this 600 mm version, the caliper is produced to the manufacturer's standard to ensure suitability for extended lengths. Does the caliper include a fine-adjustment mechanism? Yes, the M201.326 incorporates a fine-adjustment spindle to enable controlled jaw movement and more reliable seating before reading. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
600mm Workshop Precision Caliper Monoblock Fine Adjustment Stainless Steel Matt Chrome Scale, Nonius 1/128" / 1/20mm, DIN 862 - Metav IndustryLine
Take advantage of a robust 600 mm measuring range combined with hardened stainless-steel construction and a fine-adjustment slide for repeatable workshop measurements. Order the device directly via Metav Werkzeuge or ask the technical consultants for application advice. M201.326.2 Workshop caliper — 600 mm, hardened stainless steel with fine adjustment (Metav IndustryLine) The M201.326.2 is a heavy‑duty 600 mm workshop caliper engineered for long‑range component measurement, featuring a monoblock frame and a matt‑chromed scale for clear readings. Hardened stainless‑steel construction 600 mm measuring range Fine adjustment for precise setting Monoblock frame for increased stiffness Robust construction that keeps measurements stable The caliper is built from hardened stainless steel with a matt‑chromed scale, delivering resistance to corrosion and reliable legibility in workshop conditions. The monoblock design reduces flex along the beam, which improves reproducibility when measuring larger parts; this is especially relevant where repeated checks are carried out on fixtures or assemblies. The integrated fine adjustment allows controlled jaw movement for exact positioning, so measurements can be set smoothly without sudden jumps, reducing setup time and scrap rates. Vernier precision and clear standards for traceable results Equipped with a dual vernier — imperial at the top and metric at the bottom — the instrument provides practical, workshop‑grade resolution. The metric vernier corresponds to a 0.05 mm division, which aligns with the common industrial mechanical standard for calipers and supports routine quality control tasks. Compliance follows DIN 862 for jaw lengths up to 200 mm; larger jaw configurations are produced to the factory standard to ensure structural integrity over the full 600 mm range. This combination of vernier readability and normative alignment makes the caliper suitable for repeatable dimensional checks without reliance on electronics. Designed for heavy workshop use and straightforward handling Longer measuring ranges introduce challenges such as bar deflection and handling ergonomics; the M201.326.2 addresses these with a rigid beam profile and a fine‑movement thumbwheel that facilitates single‑handed, precise adjustments. The matt‑chromed scale reduces glare under strong workshop lighting while the robust jaws cope with everyday contact wear. As a long‑bar workshop caliper in the 500–1,000 mm class, it is tailored to measure larger castings, housings and fixtures where stiffness and repeatability matter more than compactness. For robust long‑range measurements rely on the Metav IndustryLine M201.326.2 — contact Metav Werkzeuge in Emmerich for detailed application guidance or to arrange supply via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: M201.326.2 GTIN: 4054469101545 Manufacturer: Metav IndustryLine eClass: 21170344 Norm: DIN 862 (jaw length ≤ 200 mm), factory standard from 250 mm Facts Measuring range: 0–600 mm Maximum measuring length: 600 mm Jaw length: 300 mm Resolution (vernier): 0.05 mm Scale system: Metric vernier (1/20 mm) and imperial vernier (1/128") Special features Material: hardened stainless steel, matt‑chromed scale Monoblock frame construction Fine adjustment (feineinstellung) for controlled jaw travel Analog vernier operation (mechanical) Designed for long‑bar workshop measurements (500–1,000 mm class) Without measuring tip (workshop style jaws) FAQ What accuracy can be expected from this long‑range workshop caliper? The M201.326.2 delivers vernier resolution of 0.05 mm, consistent with industrial mechanical caliper practice, providing reliable repeatability for workshop checks. Is the caliper suitable for both metric and imperial measurements? Yes, the device features a metric vernier (1/20 mm) and an imperial vernier (1/128"), allowing direct reading in both systems. Which materials is the caliper intended for when checking components? The caliper measures metallic and non‑metallic parts dimensionally; its hardened stainless‑steel construction ensures durability when used on typical workshop components such as castings, aluminium housings and machined steel parts. Does the instrument comply with recognised norms? The instrument is manufactured to meet DIN 862 requirements for jaw lengths up to 200 mm; larger jaw configurations conform to the factory standard to maintain beam stiffness over the full 600 mm range. How does the fine adjustment improve measurement workflow? Fine adjustment enables precise positioning of the jaws with minimal overshoot, which speeds up setup and reduces measurement variability when performing repeat checks on assemblies. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
60mm Gauge Insert For M2.5 Dial Indicator Mount, 60x4mm Stainless Steel - Metav IndustryLine
Robust stainless-steel measuring insert for reliable gauge mounting: the compact 60 × 4 mm body with an M2.5 threaded mount provides secure integration into Digital‑Uni caliper systems while keeping mass and thermal influence low. Order the M240.265 directly via Metav Werkzeuge or consult our advisors for application guidance. M240.265 — Precision measuring insert for digital calipers, stainless steel, M2.5 The M240.265 is a measuring insert designed to accept dial‑ or gauge‑type inserts, offering a compact 60 × 4 mm mounting face with an M2.5 threaded connection for use with the Digital‑Uni‑Caliper series 240.201–240.204. Stainless steel construction M2.5 threaded mounting 60 x 4 mm compact mounting face Compatible with Digital‑Uni‑Caliper series 240.201–240.204 Secure mounting for consistent measurement results A stable interface between gauge insert and caliper is essential for repeatable readings; the M240.265 provides precisely machined seating that reduces axial play and wobble. The M2.5 threaded mount secures common indicator inserts used in workshop metrology, which helps maintain contact force and alignment during inside, outside and depth measurements. By eliminating unintended movement at the gauge seat, the insert supports lower measurement scatter and a more reliable quality control process. Compact design that simplifies integration and handling With a nominal face of 60 x 4 mm and a mass of just 0.1 kg, the insert is optimised for compact digital caliper systems where space and balance matter. The small footprint minimises reach‑related deflection, preserving the overall stiffness of the measuring assembly and making it suitable for fine mechanical tasks and routine shop measurements. Low weight and a slim profile also facilitate quick replacement and tool changes in production environments without disturbing the instrument’s ergonomics. Corrosion resistance and long service life Manufactured from stainless steel, the insert resists corrosion and surface wear that can otherwise degrade seating geometry over time. The material choice reduces maintenance intervals and keeps the mating surfaces dimensionally stable even in humid or mildly contaminated workshop atmospheres. For operations that demand durable accessories that remain accurate under frequent use, this accessory contributes to predictable long‑term performance. Designed for practical metrology workflows Intended primarily for the Digital‑Uni‑Caliper family 240.201–240.204, the insert functions as a straightforward accessory to expand the measuring capabilities of existing instruments. The compact mounting face and standard thread allow repair shops, inspection benches and small series production to adapt calipers to specific measurement tasks quickly, supporting efficient setup and reduced downtime while preserving instrument traceability. Contact Metav Werkzeuge today to order the M240.265 or to request application advice from our precision specialists. Technical data Article number: M240.265 GTIN: 4061905053894 Facts Length: 60 mm Diameter: 60 x 4 mm Weight: 0.1 kg Thread: M2.5 Special features Material: stainless steel Compatible with Digital‑Uni‑Caliper series 240.201–240.204 Acceptance for dial/gauge inserts FAQ What is the primary function of this measuring insert? The M240.265 is a mounting insert that accepts dial‑ or gauge‑type inserts, enabling their use with Digital‑Uni‑Caliper series 240.201–240.204 for precise contact measurements. What material is the insert made from? The insert is manufactured from stainless steel, chosen for corrosion resistance and dimensional stability under workshop conditions. What are the key dimensions and thread specification? The mounting face measures 60 x 4 mm, the overall length is 60 mm and the threaded connection is M2.5; weight is 0.1 kg. Is the insert limited to the listed caliper series? The M240.265 is specified for Digital‑Uni‑Caliper series 240.201–240.204; it may also be compatible with other instruments that accept M2.5 gauge inserts, subject to confirmation of mating geometry. How can the part be identified for procurement or traceability? Identification is possible via the article number M240.265 and GTIN 4061905053894 for ordering and stock control. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
60mm Groove Measuring Insert Flat Measuring Face 8x8x0.8mm For Digital Caliper Series 240.201-240.204 - Metav IndustryLine
Compact and robust, the insert pairs a flat measuring face (8×8×0.8 mm) with a narrow beak engineered for precise groove contact, delivering repeatable results on profile and slot measurements. Order the M240.262 measuring insert directly via Metav Werkzeuge or ask our consultants for fitting advice and application support. M240.262 measuring insert for groove measurement — flat 8×8×0.8 mm face, 60 mm (Metav IndustryLine) The M240.262 measuring insert is a precision caliper accessory designed for groove measurement and fine slot inspection, compatible with Digital Uni caliper series 240.201–240.204. Narrow beak for groove measurement Flat measuring face 8×8×0.8 mm Length 60 mm for extended reach Stainless steel construction Precision where grooves matter The M240.262 is crafted to turn a standard caliper into a specialist gauge for slots and grooves. The flat measuring face with dimensions 8×8×0.8 mm ensures a stable contact area that reduces local deflection and improves reproducibility compared with pointed probes. Together with the narrow beak, this geometry grants improved access to tight grooves and narrow recesses, resulting in clearer contact definition and fewer ambiguous readings during quality checks. The design supports consistent alignment against slot shoulders, which aids traceable inspection routines in small-batch production or workshop quality control. Built for reliable workshop use Made from stainless steel, the insert is corrosion-resistant and tolerant to routine workshop environments, helping to maintain measurement integrity over repeated use. At approximately 0.1 kg, the component is lightweight yet stiff enough to avoid significant bending when used for typical hand-held caliper checks. The robust material and simple geometry make cleaning and visual inspection straightforward, which reduces downtime and supports fast changeover between measuring tasks. These attributes contribute to lower maintenance demands and longer service life for the caliper setup. Seamless fit and practical applications Compatibility with the Digital Uni caliper series 240.201–240.204 ensures straightforward integration without special adapters, extending the caliper’s capability to groove and slot inspection. As a caliper accessory, it is well suited to machining shops, tool rooms and component inspection where grooves, keyways or narrow recesses require rapid verification. The insert supports routine dimensional checks as part of in-process control or final inspection, enabling efficient workflows and clearer pass/fail decisions for repetitive features. Choose the Metav IndustryLine M240.262 for dependable groove measurement — contact Metav Werkzeuge in Emmerich for stock status, compatibility guidance and specialist application advice. Technical Data SKU: M240.262 GTIN: 4061905053870 Category: Caliper accessory Facts Length: 60 mm Flat face dimensions: 8×8×0.8 mm Weight: 0.1 kg Material: stainless steel Special features Narrow beak for groove measurement Flat measuring face for stable contact For Digital Uni caliper series 240.201–240.204 Suitable for slot and groove inspection FAQ What is the M240.262 intended to measure? The M240.262 is intended for groove and slot measurement, improving contact stability when inspecting narrow recesses and keyways with a compatible caliper. Which calipers is this insert compatible with? This insert fits the Digital Uni caliper series 240.201–240.204 and converts those instruments into dedicated groove-measurement tools. What material is the insert made from and why is that relevant? The insert is made from stainless steel, offering corrosion resistance and durable contact surfaces that preserve measurement accuracy during regular workshop use. How does the flat measuring face improve results? A flat measuring face of 8×8×0.8 mm increases the contact area against slot shoulders, reducing local deformation and improving the repeatability of readings compared with finer-point probes. Is the insert suitable for production inspection tasks? Yes, the M240.262 is designed for repetitive groove and slot checks in machining and inspection environments, supporting efficient in-process control and quality assurance. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
60mm Large Jaw Measuring Insert 25x20 mm For Digital Caliper Series 240.201–240.204 - Metav IndustryLine
Take advantage of the combination of robust stainless steel construction and large 25 x 20 mm jaws for reliable contact on broader workpieces; the compact insert provides a precise, repeatable fit and straightforward replacement. Order the M240.266 measuring insert directly via Metav Werkzeuge or ask our consultants if needed. M240.266 measuring insert for Digital‑Uni calipers — large jaws, stainless steel A M240.266 measuring insert designed to extend jaw reach and improve contact consistency for Digital‑Uni digital calipers in workshop and quality‑control environments. Large 25 x 20 mm measuring jaws Precision stainless steel construction Compatible with Digital‑Uni series 240.201–240.204 Compact replacement insert, workshop fit Stable contact for larger surfaces and assemblies The large jaw footprint delivers a more secure contact surface when measuring uneven or larger components. The 25 x 20 mm jaw geometry increases contact area, reducing local deformation and lowering the risk of slippage during measurement. Constructed from stainless steel, the insert resists corrosion and retains dimensional stability in workshop conditions, which supports consistent measurement results across repetitive checks. Precision fit that keeps inspections efficient Manufactured to tight tolerances, the insert ensures a repeatable connection with the caliper head and thus predictable measurement behaviour. Low mass and compact geometry improve handling without adding bulk; the item weight of 0.1 kg contributes to ease of use while preserving the rigidity needed for accurate readings. The result is reduced setup time and fewer discarded readings during routine inspections, supporting efficient production and quality workflows. Seamless integration into digital-caliper workflows Compatibility with the Digital‑Uni series 240.201–240.204 allows straightforward replacement and minimal downtime when a specialised jaw profile is required. The insert adapts existing digital calipers for measurements on broader contact faces, enabling technicians to switch between standard and large‑jaw configurations quickly. Clear model compatibility simplifies procurement and ensures the accessory supports established metrology procedures. Contact Metav Werkzeuge today for matching accessories or model advice — Metav IndustryLine components are stocked and quality‑checked in Emmerich to ensure timely delivery and consistent fit Technical data Article number: M240.266 GTIN: 4061905053900 Brand: Metav IndustryLine Facts Weight: 0.1 kg Jaw dimensions: 25 x 20 mm EClass: 21170324 Special features Material: stainless steel Compatible with Digital‑Uni caliper series 240.201–240.204 Intended use: replacement measuring insert for digital calipers Images and technical drawing available FAQ What models is this measuring insert compatible with? The M240.266 measuring insert is compatible with the Digital‑Uni caliper series 240.201–240.204 and is designed for straightforward replacement on those digital caliper heads. Will the stainless steel construction resist workshop corrosion? Yes, the stainless steel material used for the insert ensures good corrosion resistance and long‑term dimensional stability under normal workshop conditions. Can the large jaws be used for precision quality checks on flat surfaces? The larger 25 x 20 mm jaws increase contact area and improve stability on broader flat surfaces, making the insert suitable for repeatable quality checks where a wider contact face is advantageous. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
60mm Round Probe Insert 30x5mm For Digital Uni Caliper Series 240.201‑240.204 - Metav IndustryLine
Take advantage of a corrosion‑resistant stainless steel spare that restores precise contact with a round Ø 5 mm measuring pin and a practical 60 mm pin length, ensuring consistent results when replaced in compatible calipers; order the part directly via Metav Werkzeuge or consult our specialists for installation advice. M240.267 — Measuring insert for Digital‑Uni calipers, Ø 5 mm round pin M240.267 is a stainless steel measuring insert intended as a direct spare for Digital‑Uni calipers series 240.201–240.204, providing a durable, precise contact point for routine workshop measurements. Stainless steel construction Ø 5 mm round measuring pin Compatible with Digital‑Uni 240.201–240.204 Precision restored with a purpose‑made contact tip The exchange insert delivers a clean mechanical interface designed to return a caliper to repeatable measurement behaviour. The Ø 5 mm round pin concentrates contact force on a predictable surface, reducing wobble during small‑diameter checks and helping to maintain measurement stability. Manufactured in stainless steel, the tip resists corrosion and wear, which contributes to sustained precision over many cycles and reduces the need for frequent replacements. Durable materials for workshop conditions Constructed from stainless steel, this spare is specified to withstand typical shop environments where oils, coolants and handling can accelerate wear. The 60 mm pin length is balanced for accessibility without compromising rigidity, translating into fewer re‑checks and faster inspection loops; the modest mass also keeps handling straightforward. Together these properties deliver a reliable, low‑maintenance component that supports production continuity and longer service intervals. Practical spare and simple retrofitting As a purpose‑built measuring insert for the Digital‑Uni series, the component is designed for straightforward replacement with standard workshop tools, enabling fast downtimes and minimal instrument out‑of‑service time. The lightweight construction eases handling during fitment. For customers maintaining a fleet of calipers, stocking this spare part supports predictable maintenance planning and reduces interruptions in quality control procedures. For retrofit parts or technical support on Metav IndustryLine measuring inserts, contact Metav Werkzeuge in Emmerich by phone +49 2822 7131930 or email info@metav-werkzeuge.com to discuss fitment and delivery options Technical Data Article number: M240.267 GTIN: 4061905053917 Material: Stainless steel Weight: 0.1 kg Measuring pin Ø: 5 mm Pin length: 60 mm Overall length: 70 mm Facts Compatible series: Digital‑Uni 240.201–240.204 Measuring range outside: 0‑X Measuring range inside: 10‑X Special features Round measuring pin Corrosion‑resistant stainless steel Lightweight spare part for calipers FAQ What calipers does this insert fit? This insert fits the Digital‑Uni calipers series 240.201–240.204 and is supplied as the Metav IndustryLine spare part M240.267. Is the measuring pin resistant to corrosion? Yes, the measuring pin is made of stainless steel, which provides corrosion resistance suitable for standard workshop conditions. Can this insert be fitted without special tools? The insert is designed for straightforward retrofitting using common workshop tools and can be replaced quickly to minimise instrument downtime. What are the dimensions of the pin and its length? The pin diameter is Ø 5 mm and the contact pin length is 60 mm; the overall part length is 70 mm. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Precision calipers for accurate, repeatable measurement
Calipers are the indispensable length-measuring tools for industry and workshop environments, enabling fast and exact external, internal, depth and step measurements. Our professional range of precision calipers, including vernier calipers, dial calipers and digital calipers, combines mechanical robustness with modern data handling to support consistent quality assurance.
How these calipers work and where they help most
Analogue vernier calipers deliver reliable, autarkic operation via the vernier scale and are best suited to heavy-duty workshop use where durability matters. Digital calipers provide a contrast-rich display, minimise reading errors and speed up inspection routines through functions such as zero setting and data output. At the high end, touchscreen calipers from Microtech feature an integrated microcomputer, colour touch display, built-in error-tolerance checks and wireless data transmission, making them suited for Industry 4.0 workflows. Workshop calipers with extended measuring ranges offer optional fine adjustment and rounded tips for interior measurements, while in-built calipers can be mounted directly to machines or test rigs to monitor travel. Specialty calipers cover tasks such as deep grooves, pipe wall thickness, brake disc inspection, three-point measurements and bespoke geometries.
Tangible benefits that improve production performance
- Faster throughput: digital calipers with data output reduce manual entry and accelerate quality checks.
- Higher repeatability: robust mechanical design and error-tolerance controls raise measurement consistency.
- Flexible integration: wireless data transmission and touchscreen operation simplify digitisation to existing systems.
- Reduced downtime: workshop and in-built variants with fine adjustment minimise rework and set-up time.
- Application coverage: specialty calipers adapt to complex geometries, from three-point checks to deep-niche measurements.
Microtech and metav — quality and supply you can rely on
For high-end, touchscreen-equipped instruments, Microtech represents the technological benchmark thanks to its integrated controls and wireless capabilities. As a precision partner, Metav complements this with decades of experience and a comprehensive offering: more than 250,000 products, a European quality filter in Emmerich and the trust of over 48,000 customers, making Metav a sensible central source for calipers and measuring equipment.
Quick summary
Calipers — from analogue vernier to touchscreen digital — deliver the measurement accuracy and data connectivity modern production demands while reducing inspection time and improving repeatability.
FAQ
What are the main differences between analogue and digital calipers?
Analogue vernier calipers rely on a vernier scale and are prized for ruggedness and independence from power, whereas digital calipers provide a contrast display, zero setting and data output to eliminate readout errors and speed up quality processes.
Can calipers be integrated into a digital inspection workflow?
Yes. Many digital calipers and touchscreen models support data output and wireless data transmission, enabling direct transfer of measurements into quality-management systems or statistical process control.
Which caliper type is best for large measuring ranges in a workshop?
Workshop calipers with extended measuring ranges and optional fine adjustment are designed for large components; they maintain mechanical stability and are available with rounded interior jaws for safer internal measurements.
Are there calipers for specialised geometries like deep grooves or brake discs?
Specialty calipers are explicitly engineered for such tasks. They feature tailored measuring faces for deep-niche measurements, pipe wall thicknesses, brake-disc checks and three-point or flexible geometries.
How do touchscreen calipers from Microtech improve quality control?
Microtech touchscreen calipers combine an integrated microcomputer, colour touch display and built-in error-tolerance checks with wireless data transmission, allowing immediate verification, reduced human error and seamless digitisation in line with Industry 4.0 practices.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com