Precision dial indicators for accurate length and runout checks
Dial indicators and related gauges provide precise measurement of small lengths and deviations, serving applications such as concentricity, flatness and comparison checks on lathes and milling machines, and offering both digital and analog options to suit different measuring ranges. These instruments are used with appropriate accessories for tasks like depth measurement or runout testing and feature hardened contact faces or balls for reliable contact; typical variants include dial indicators, test indicators and depth gauges. Analog types transmit spindle movement via rack and pinion to the pointer and may include a drag pointer to prevent gear damage, while digital versions give straightforward numeric readouts for quick interpretation. Using these gauges improves setup accuracy, process control and the repeatability of measurements in metalworking and workshop environments.
12.7mm Digital Test Indicator With 40mm Bridge And Extensions 10/20/40/70/100mm, mm/inch Display - Metav IndustryLine
Take advantage of precise, high-contrast readout and a versatile measuring bridge with five extensions to inspect small displacements reliably; the compact digital design, with a 0.01 mm resolution and a 125 mm measuring depth, supports repeatable workshop checks and QA tasks. Order the digital dial indicator directly via Metav Werkzeuge or ask our consultants if needed. Digital dial indicator with measuring bridge, 10 mm (M301.051.5) — 0.01 mm resolution, Ø40 mm bridge (Metav IndustryLine) Digital dial indicator with measuring bridge, 10 mm (M301.051.5) provides short-range displacement measurement from a bridge mount and is intended for workshop inspection, jig set-up and precision adjustment tasks High-contrast digital display 0.01 mm resolution Measuring bridge Ø40 mm for stable mounting Extensions 10–100 mm for extended reach Measuring depth 125 mm for deeper features Accurate digital readout that speeds inspection The compact digital display delivers a clear numerical result with an increment of 0.01 mm (0.0005 in), eliminating the ambiguity of analogue scales and reducing reading errors during routine checks. The electronic zeroing and ABS/PRESET functions streamline repeat measurements, while the mm/inch switch simplifies work across different drawing units. Designed for short-range verification, the instrument gives a consistent numeric basis for decisions in set-up and quality control, increasing throughput without compromising traceability. Flexible bridge mounting for confined or recessed checks A Ø40 mm measuring bridge supplies a stable interface for clamping to fixtures or test rigs, and the set of five extensions (10, 20, 40, 70 and 100 mm) extends the working envelope without sacrificing stiffness. This flexibility enables access to recessed bores, grooves and stepped surfaces while maintaining alignment and reproducibility. The compact bridge arrangement is particularly useful where a conventional base would obstruct access, so the gauge can be integrated into assembly jigs or temporary fixtures to support fast, repeatable positioning. Practical depth reach and robust workshop operation With a measuring depth of 125 mm and a lightweight construction (approx. 0.62 kg), the instrument balances reach and manoeuvrability for bench and machine‑side use. The reversible measuring direction feature allows clockwise or anticlockwise indication depending on mounting orientation, making the device adaptable to diverse test set-ups. The device follows a factory standard and is supplied ready for immediate inspection tasks, offering a low-friction introduction to digital metrology for production environments and maintenance teams. Integration, trust and everyday benefits As part of the Metav IndustryLine, this digital indicator supports quick go/no‑go checks and dimensional spot checks that prevent costly rework further down the line. The unit’s straightforward control set (0/ON, ABS/PRESET and mm/inch) reduces operator training time, while the clear 0.01 mm resolution helps to verify tolerances reliably. For workshops that value pragmatic, dependable tools, this indicator combines concise readout, adaptable mounting and measurable depth to keep production moving with confidence. Contact Metav Werkzeuge for tailored advice on the Metav IndustryLine digital dial indicator M301.051.5 or to confirm suitability for a specific measurement task; delivery and technical consultation are available from Emmerich – eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number (SKU): M301.051.5 GTIN: 4054469168067 Manufacturer: Metav IndustryLine Display: 0/ON, ABS/PRESET and mm/inch button Bridge diameter: Ø40 mm Extensions: 10, 20, 40, 70, 100 mm Norm: Werksnorm Facts Measuring range: 0–12.7 mm Resolution / Readout: 0.01 mm (0.0005 in) Measuring depth: 125 mm Weight: 0.62 kg Category: Dial indicators Special features Reversible measuring direction possible Digital unit switching mm/inch ABS/PRESET zeroing function eClass: 21170308 ETIM: EC003591 FAQ What is the measuring range and resolution of this indicator? The digital dial indicator M301.051.5 offers a measuring range of 0–12.7 mm with a readout resolution of 0.01 mm (0.0005 in). Can the bridge-mounted indicator reach into deep features? Yes; the measuring bridge with supplied extensions (10, 20, 40, 70 and 100 mm) and a measuring depth of 125 mm allow access to recessed bores and stepped surfaces. Is the display able to switch between metric and imperial units? The instrument features a mm/inch function, enabling quick switching between metric and imperial readouts for mixed‑unit workflows. How does the reversible measuring direction help in practice? Reversing the measuring direction provides flexibility when the indicator is mounted in non‑standard orientations, ensuring the reading direction matches the fixturing and improves operator ergonomics. Which brand and article number should be quoted for ordering? Reference the Metav IndustryLine digital dial indicator M301.051.5 (GTIN 4054469168067) when requesting the item. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
12.7mm Inductive Digital Dial Gauge 0.01mm Resolution, Bar Graph Display, mm/inch, Data - Metav IndustryLine
Take advantage of a compact measuring instrument that pairs high repeatability with intuitive operation and secure transport: the inductive digital indicator delivers 0.01 mm accuracy with a fine 0.001 mm resolution, and is supplied in a protective case for safe handling. Order the instrument directly via Metav Werkzeuge or ask the consultants for integration advice. Digital dial indicator M301.081 — Inductive, 12.7 mm range, 0.01 mm accuracy (Metav IndustryLine) A Digital dial indicator M301.081 engineered for precise displacement measurement in workshop inspection and machine setup tasks, combining a robust inductive sensing system with a bar‑graph display for rapid visual feedback. Inductive measuring system, 12.7 mm range 0.01 mm accuracy, 0.001 mm resolution mm/inch, PRESET, TOL and DATA functions RB 7 data output and bar‑graph display Reliable precision for repeatable inspection results The inductive measuring system converts lateral probe travel into stable electronic values, avoiding the mechanical wear and backlash common to contact‑based gauges. With a measuring span of 12.7 mm, an indicated accuracy of 0.01 mm and a resolution of 0.001 mm, the instrument is suited to routine quality control and setup operations where consistent results matter. The specified repeatability of 0.004 mm supports reproducible checks on small components and fixtures; this means fewer rechecks and a more predictable inspection flow, which improves throughput without sacrificing measurement integrity. Faster checks through clear indication and data transfer A clear 56 mm dial and an illuminated digital readout with an integrated bar‑graph display provide immediate visual confirmation of deviations, while the multi‑function keypad offers mm/inch switching, PRESET, TOL and DATA commands for flexible use. The built‑in RB 7 data output enables direct capture of readings into a measurement system or SPC software, reducing manual entry errors and simplifying traceability. These features speed up batch inspections and make the instrument practical for both bench work and integration into semi‑automated test rigs. Designed for workshop use and secure handling Weighing approximately 0.3 kg, the instrument is light enough for handheld checks yet robust for everyday shop use. The inductive probe and sealed electronics tolerate standard workshop conditions better than purely mechanical indicators. Delivery includes a protective case to keep the instrument safe during transport and storage, preserving calibration and ensuring the tool is ready whenever it is needed. The combination of dependable sensing, intuitive controls and secure packaging makes it a pragmatic choice for production environments. Contact Metav Werkzeuge for tailored measurement advice and request the Metav IndustryLine digital dial indicator M301.081 with RB 7 output to streamline your inspection processes Technical data Article number: M301.081 GTIN: 4054469113692 eClass: 21170308 ETIM: EC003591 Brand: Metav IndustryLine Facts Measuring range: 0–12.7 mm Display resolution: 0.001 mm Accuracy: 0.01 mm Repeatability: 0.004 mm Dial diameter: 56 mm Weight: 0.3 kg Special features Inductive measuring system Digital display with bar‑graph indicator mm/inch, 0/OFF, PRESET, TOL and DATA keys Data output: RB 7 Supplied in protective case Digital instrument (electronic display) FAQ How large is the measuring span of this indicator and what is it best used for? The indicator offers a measuring span of 12.7 mm and is best suited for displacement checks, fixture setup and routine quality control where compact, repeatable measurements are required. Can readings be recorded automatically from the instrument? Yes, the instrument provides a data output via RB 7 so readings can be captured by inspection software or data loggers for direct processing. What level of repeatability and resolution can be expected? The instrument delivers a resolution of 0.001 mm and a repeatability of 0.004 mm, supporting consistent results across repeated measurements. Is the unit ready for use and how is it protected during transport? The Metav IndustryLine digital dial indicator is supplied in a protective case to ensure safe transport and storage, helping to maintain measurement reliability. Which display and control functions assist fast inspection routines? Integrated features such as the bar‑graph display, mm/inch switching, PRESET and TOL functions speed up checks and reduce interpretation time during inspections. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
120mm Depth Gauge Bridge Flat Measuring Surface For Dial Indicators, H20mm - Käfer Messuhrenfabrik GmbH & Co. KG
Take advantage of a compact, stable measuring aid with a 120 mm bridge length and 20 mm height for repeatable set-ups with dial indicators; order the TB 120 depth measuring bridge directly via Metav Werkzeuge or consult our specialists for application advice. KÄFER TB 120 Depth Measuring Bridge — 120 mm bridge length, 20 mm height KÄFER TB 120 is a precision depth measuring bridge designed to provide a flat reference surface for dial indicators in workshop and inspection environments. 120 mm bridge length 20 mm height Flat measuring surface for dial indicators Compact bench-friendly design Consistent set-up for reliable depth checks The TB 120 delivers a stable reference platform that reduces set-up variability when using dial indicators. The 120 mm span and 20 mm height create a predictable workspace for positioning measuring devices, which shortens preparation time and supports higher throughput in routine inspections. By stabilising the gauge point, the bridge helps reduce measurement scatter and supports reproducible results, a clear advantage in tasks that demand repeatability rather than guesswork. The flat measuring surface for dial indicators simplifies alignment and reduces the need for improvised jigs. Suited to small components and tight fixtures A compact measuring bridge such as this is particularly useful where bench space is limited or where small workpieces require accurate depth referencing. The modest footprint allows straightforward placement alongside other inspection tools without obstructing access. The solid geometry and even top surface permit secure contact with a dial gauge stem or small fixtures, enabling precise readings on steps, recesses and bores. For workshops seeking to streamline inspection workflows, the instrument offers a space-efficient alternative to larger stands while maintaining dependable reference geometry. Practical integration into inspection routines Integration into daily measurement routines is straightforward: the device functions as a fixed reference for a dial indicator, facilitating comparative measurements and quick acceptance checks. The model series TB 120 is compatible with common dial gauge stems and mounting clamps, enabling rapid deployment across multiple fixtures. For production environments that value consistent process control, the bridge supports quicker decision-making by limiting measurement uncertainty inherent to ad hoc setups. If further compatibility details or dimensional clarifications are required, technical support is available at info@metav-werkzeuge.com or by phone. Contact Metav Werkzeuge today for a tailored recommendation or to request further technical details and availability for the TB 120 depth measuring bridge from Metav Werkzeuge in Emmerich Technical Data Article number: 4000851319NW Model series: TB 120 Product type: Depth measuring bridge Label: Tiefenmessbrücke TB 120 Brücken-L.120mm H.20mm ebene Messfl.z.Messuhren KÄFER Manufacturer: Käfer Messuhrenfabrik GmbH & Co. KG Specifications Bridge length: 120 mm Height: 20 mm Packaging unit: 1 Special features Flat measuring surface for dial indicators Compact design suitable for bench use Intended for repeatable placement of dial gauges FAQ What are the exact dimensions of the depth measuring bridge? The TB 120 depth measuring bridge has a bridge length of 120 mm and a height of 20 mm. Which measuring devices are compatible with this bridge? The bridge is designed for use with standard dial indicators; its flat measuring surface accommodates common stem diameters and indicator mounting clamps. Is the TB 120 suitable for tight workshop benches? Yes, the compact arrangement of the depth measuring bridge is intended for bench-level use where space is limited while still providing a stable reference for measurements. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
128 mm Magnetic Stand Central Clamp With Lamellar Magnetic Base, Max Height 15mm - Metav IndustryLine
Take advantage of a compact, workshop‑ready holder that combines a lamellar magnetic base with a firm central clamping system and an easily adjustable rod for repeatable instrument positioning — ideal for inspection benches and mobile measuring tasks. Order the magnetic stand directly via Metav Werkzeuge or ask our consultants for specification support. Magnetic stand with central clamp and lamellar magnetic base – compact 128 mm rod, 60 magnet force (Metav IndustryLine) The Magnetic stand with central clamp and lamellar magnetic base provides rapid, secure mounting of dial indicators and small measuring instruments on ferrous workpieces and machine beds for inspection and setup tasks. Lamellar magnetic base for uneven surfaces Central clamp for quick, rigid fixation Compact 128 mm rod for tight setups Maximum adjustable height 15 mm Secure holding on rough and curved surfaces The lamellar magnetic base is designed to increase contact on irregular or slightly curved ferrous surfaces, improving grip where flat magnets would slip. Combined with the central clamping mechanism, the construction converts magnetic adhesion into a rigid mounting platform that reduces micro‑movement during readings. The base dimensions (75 × 47 × 54 mm) and the rated magnet force: 60 deliver a reliable static hold while the low overall footprint keeps the set‑up unobtrusive on crowded benches. This technical arrangement shortens set‑up time and supports consistent measurement results — an efficiency improvement for repetitive inspection routines. Compact geometry for confined set‑ups and universal mounting A short stem length and compact geometry make this holder suitable where space is limited. The rod measures 128 mm, the overall height is 347 mm, and the unit weighs 2 kg, which together produce a stable yet portable solution for bench and on‑machine use. An M8 threaded interface on the foot enables direct attachment of indicator stems and accessory adaptors commonly used in workshop practice, granting broad compatibility without additional adapters. A maximum adjustable height of 15 mm allows fine levelling of the instrument tip relative to the workpiece, enabling precise contact adjustments without changing the base position. Dependable design for everyday inspection work Engineered for frequent use, the construction emphasises repeatability and straightforward operation. Central clamping secures attachments with minimal lateral play, while the lamellar magnet reduces the need for perfect surface preparation — practical for typical machine‑shop or maintenance environments. Backed by Metav’s focus on accessible precision and dependable supply, this magnetic stand supports process reliability and helps standardise small‑part inspection across multiple workstations. Contact Metav Werkzeuge for ordering and specification matching to ensure the magnetic stand fits the intended inspection routine and mounting requirements Technical Data SKU: M208.118.2 GTIN: 4054469181561 Label: Magnetstativ mit Zentralklemmung und Lamellen-Magnetfuß Gestänge 128 mm Manufacturer: Metav IndustryLine Facts Weight: 2 kg Overall height: 347 mm Rod length (arm): 128 x 105 x 46 mm Foot dimensions: 75 x 47 x 54 mm Thread: M8 Magnet force: 60 Special features Lamellar magnetic base for improved contact on uneven ferrous surfaces Central clamping for rigid fixation of indicators and small tools Maximum adjustable height 15 mm Compact design for confined bench and on‑machine mounting FAQ What types of surfaces will the lamellar magnet adhere to best? The lamellar magnetic base of the magnetic stand adheres best to ferrous surfaces, including slightly uneven or curved machine beds and workpieces, providing improved contact where flat magnets may lose grip. Can the stand accept standard dial indicators and stems? Yes, the central clamp and M8 threaded connection allow mounting of standard dial indicators and indicator stems; the magnetic stand (SKU M208.118.2) is configured for common workshop indicator fittings. How much fine adjustment is possible once the instrument is clamped? The device offers a maximum adjustable height of 15 mm for fine levelling after clamping, enabling precise tip alignment without repositioning the base. Is the unit suitable for mobile inspection tasks? With a compact rod length of 128 mm and a weight of 2 kg, the magnetic stand is easily moved between benches and machines while still providing stable holding force for routine inspection work. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
133mm Magnetic Indicator Stand 10kg Central Force Clamp Permanent Base, Universal - Metav IndustryLine
Small and stable: the compact stand pairs a 10 kg permanent magnet base with a central force clamp and a 133 mm profile to deliver reliable, repeatable positioning for workshop metrology. Order the unit directly via Metav Werkzeuge or consult their specialists for advice on integrating the stand into existing inspection setups. Magnetic Indicator Stand M208.111 — 10 kg permanent base, 133 mm compact profile (Metav IndustryLine) The Magnetic Indicator Stand M208.111 is a compact metrology support for securing fine probes and dial indicators, combining a permanent magnet base with a central force clamp for secure, vibration‑resistant positioning in tight workspaces Compact 133 mm height for tight setups 10 kg permanent holding force Central force clamp for secure locking Ø35 mm foot with M4 mounting thread Stable positioning for repeatable measurements The principal benefit of this compact metrology support is its consistent clamping performance: a 10 kg holding force from the permanent magnet base keeps the stand locked to ferrous surfaces without the need for continuous manual pressure. The central force clamp concentrates the clamping action into a single, controllable movement, which reduces micro‑shifts during fine measurements and therefore improves repeatability. For workshop and quality‑control tasks this translates into fewer re‑measures and a steadier inspection flow, particularly when used with sensitive dial gauges or test probes requiring low lateral movement. Compact design that fits tight workspaces With an overall height of 133 mm and a compact footprint, this magnetic support is designed for confined measurement stations and machine tables where full‑size stands would obstruct access. The small mass and low profile make setup and repositioning straightforward while still offering the rigidity typically expected from larger supports. The lightweight construction does not compromise stability thanks to the strong permanent magnet base, making it a practical choice when space optimization and reliable support are required in assembly jigs, inspection benches or lathe setups. Versatile mounting and probe compatibility The stand is supplied with a Ø35 x 30 mm foot and an M4 mounting thread to accommodate common adaptors and fixtures found in metrology kits. It is specifically suited for fine probes with dovetail guidance, providing secure mechanical engagement for these probe types. The compact clamping mechanism permits quick attachment and release, enabling efficient tool changes and probe alignment. As a universal accessory in measurement equipment ranges, the stand is suitable for inspection, setup and comparative measurement tasks across general workshop and machine‑shop environments. Speak with Metav Werkzeuge for a tailored quotation and delivery options for the Metav IndustryLine magnetic indicator stand M208.111, or request integration advice from their technical consultants Technical data Article number: M208.111 GTIN: 4054469104799 ECLASS: 21170601 Numbers / Core Technical Data Holding force: 10 kg Overall height: 133 mm Weight: 0.35 kg Foot: Ø35 x 30 mm, M4 thread Special features Permanent magnet base Central force clamp Suitable for fine probes with dovetail guidance Universal application Category: Magnetic stands FAQ What holding force does the magnetic indicator stand provide? The Magnetic Indicator Stand M208.111 provides a 10 kg holding force from its permanent magnet base. Is the magnet permanent or switchable? The stand uses a permanent magnet base, which gives reliable holding without a switching mechanism. Which probes and indicators are compatible with this stand? This stand is suitable for fine probes with dovetail guidance and standard dial indicators that can be mounted via the Ø35 mm foot and M4 thread. What are the dimensions and weight of the stand? Overall height is 133 mm and the weight is 0.35 kg, making it compact and easy to position in confined inspection areas. How does the central force clamp benefit measurement tasks? The central force clamp concentrates clamping action into one movement, reducing micro‑shifts and improving repeatability during precision measurements with sensitive gauges. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
13mm Capacitive Linear Probe 0.0001mm Resolution Cable Included - Microtech Metrology
Take advantage of a compact, capacitive linear probe that combines fine-range measurement with digital output and a repeatable ±0.002 mm accuracy; the included 2 m cable and Ø8‑h6 mounting make workshop integration straightforward. Order directly via Metav Werkzeuge or ask our consultants for further technical clarification. Microtech Metrology Probe 120129137P — capacitive linear probe, 0–13 mm, 0.002 mm accuracy The Microtech Metrology Probe 120129137P is a compact, capacitive linear measuring probe designed for short‑range precision checks in workshop and quality‑control applications Capacitive linear measuring principle High resolution 0.002 mm accuracy Compact 0–13 mm measuring range Includes 2 m connection cable Precision where compactness matters Aimed at inspection tasks that demand high fidelity within a small envelope, this capacitive linear sensor provides a 0–13 mm measuring range with an accuracy of 0.002 mm, which positions it in the micro‑range class for fine measurements. The compact form factor and the Ø8‑h6 mounting interface allow the sensor to be installed in tight fixtures or on small carriers without compromising stiffness. For everyday workshop use this means reliable repeatability during short‑stroke checks and minimal intrusiveness when measuring delicate components. Digital measurement and traceable repeatability Equipped for digital readout, the probe delivers a fine display step of 0.0001 mm, supporting precise comparative measurements and small incremental adjustments on production machinery. The quoted accuracy of ±0.002 mm describes the expected deviation under standard conditions, which helps with process control and quality documentation. Because the sensor is specified as a digital device, it integrates smoothly with automated readout systems or data collection units, reducing transcription errors and accelerating inspection throughput. Gentle contact and secure mounting for repeatable results Contact force between 0.6–1 N ensures firm but gentle engagement with measured surfaces, protecting fine finishes while keeping deformation-induced errors low. The standard Ø8‑h6 shank allows precise seating in common adapter blocks and mounting bores, improving alignment and reducing tip run‑out. Where part geometry or surface sensitivity is a concern, the controlled measuring force and compact probe geometry help to preserve component integrity while producing reproducible measurements. Ready for workshop integration and fast setup Supplied with a 2 m connection cable, the probe is prepared for immediate connection to compatible readouts and data loggers; the digital nature of the output simplifies linking to modern inspection stations. The reversal span of 0.5 mm offers a defined operational window for short travel comparisons and comparative gauging tasks. As a practical measuring device it suits both manual bench checks and semi‑automated inspection rigs in machine shops, toolrooms and quality laboratories that require compact, accurate point sensing. For technical advice on the Microtech Metrology capacitive linear probe and guidance on system integration, contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 120129137P GTIN: 4061905457647 Manufacturer: Microtech Metrology Facts Measuring range: 0–13 mm Accuracy: 0.002 mm Display resolution: 0.0001 mm Measuring force: 0.6–1 N Reversal span: 0.5 mm eClass: 21170308 Special features Capacitive and linear measuring principle Digital device (digital output) Mounting: Ø8‑h6 Includes 2 m cable Category: Messuhren (dial indicators / measuring instruments) FAQ What is the effective measuring range of this probe? The probe provides a measuring range of 0–13 mm, suitable for short‑stroke inspection tasks and fine component checks. How accurate are the readings from the probe? The device is specified with an accuracy of 0.002 mm and a display step of 0.0001 mm, offering high repeatability for workshop and quality‑control purposes. Can the probe be mounted in standard fixtures? Yes — the probe uses a Ø8‑h6 shank for secure mounting in common adapter blocks and fixture bores. Is a cable supplied and how long is it? A 2 m connection cable is included for straightforward connection to compatible readouts and data acquisition systems. What contact force does the probe apply to measured surfaces? Contact force ranges from 0.6 to 1 N, providing controlled engagement that limits surface deformation while ensuring reliable contact. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
13mm Digital Dial Gauge With Calculation Function, CR2032 Battery, Aluminium Body, Supplied With 10/20/30/60/100mm Bases - Metav IndustryLine
Take advantage of the combination of precise 0.005 mm resolution, compact aluminium construction and integrated calculation functions for consistent, time‑saving inspections; order the instrument directly via Metav Werkzeuge or consult our specialists for application advice. Digital dial gauge M907.884 — digital indicator with calculation function (Metav IndustryLine) The Digital dial gauge M907.884 is a compact workshop indicator designed for fine dimensional checks and simple on‑board calculations in quality control and precision engineering environments. Digital calculation functions and mm/inch switching High resolution 0.005 mm accuracy Aluminium housing with lightweight design Supplied with five measuring bases Precision tailored to fine mechanical tasks The M907.884 delivers a measurement range of 0–13 mm combined with a reading/accuracy of 0.005 mm, making it suited to fine mechanical and component work where small deviations matter. The compact format keeps the measuring tip and stem stiff under hand use, reducing bending‑induced error and ensuring repeatable readings on small parts. The numeric specification provides a clear basis for inspection planning and process control. Integrated calculation and versatile display simplify workflow Equipped with on‑board calculation functions and a display offering ON/OFF, RESET, HOLD and mm/inch selection, the instrument reduces reliance on external calculators and manual conversion. The digital logic speeds up basic arithmetic operations during series inspections, cutting administrative steps and enabling faster decision cycles. The mm/inch toggle supports mixed‑standard production without interrupting the measurement flow. Lightweight construction for everyday handling and durability A body made from aluminium combines low mass and adequate rigidity for workshop use, while keeping handling fatigue to a minimum during repeated measurements. The device runs on a CR2032 cell for long storage life and simple replacement. Delivered with a set of measuring bases (10, 20, 30, 60 and 100 mm), the gauge is ready to adapt to different test setups without additional purchases, improving first‑time usability on the shop floor. How the specifications support reliable inspection The solid numerical performance — 0.005 mm resolution and compact range — creates a predictable error budget for quality assurance plans and statistical process control. The digital readout and calculation capability lower human transcription errors, while the included bases aid quick fixture setup. For production environments requiring frequent small‑part checks, the combination of accuracy and operational speed delivers measurable efficiency gains. For technical evaluation or to request an order, contact Metav Werkzeuge in Emmerich—email info@metav-werkzeuge.com or call +49 2822 7131930 to arrange application guidance or purchasing via the Metav distribution hub. Technical data SKU: M907.884 GTIN: 4061905041921 Measurement range: 0–13 mm Accuracy / reading: 0.005 mm Display functions: ON/OFF, RESET, HOLD, mm/inch Battery: CR2032 Housing material: Aluminium Accessories: measuring bases 10, 20, 30, 60, 100 mm Key numerical data Measuring range (min–max): 0–13 mm Resolution / reading: 0.005 mm Included measuring bases: 10 mm, 20 mm, 30 mm, 60 mm, 100 mm Battery type: CR2032 Features and functions Digital calculation functions Digital display with unit toggle Lightweight aluminium construction Ready for workshop inspection tasks Category: Indicators / Dial gauges FAQ What measurement range does the instrument cover? The Digital dial gauge M907.884 covers a measuring range of 0–13 mm. How precise is the readout on this indicator? This instrument provides a resolution and accuracy of 0.005 mm, suitable for fine mechanical inspection tasks. Does the display allow unit switching between metric and imperial? Yes, the digital display of the M907.884 includes an mm/inch toggle for quick unit conversion. Are calculation functions built into the device? Yes, the digital indicator features integrated calculation functions to simplify on‑the‑spot arithmetic during inspections. Which power source does the device use? The gauge is powered by a CR2032 battery for easy replacement and dependable shelf life. What accessories are included with delivery? The M907.884 is supplied with measuring bases of 10, 20, 30, 60 and 100 mm to support a range of test set‑ups. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
13mm Tip Probe R0.3 For Dial Indicator With M2.5 Thread - Metav IndustryLine
Benefit from the pinpoint contact of the R0.3 mm tip, the compact 13 mm length for confined measurements and a secure M2.5 threaded connection; order the measuring tip directly via Metav Werkzeuge or request application advice from our consultants. Measuring tip for dial gauge "Point", R 0.3 mm, 13 mm, M2.5 — Metav IndustryLine Measuring tip for dial gauge "Point", R 0.3 mm, 13 mm, M2.5 offers a compact contact solution for precision dial indicators in tight or detailed measurement tasks R0.3 mm precision tip Threaded M2.5 connection 13 mm length for confined spaces Compatible with standard dial gauges Precision where the contact point counts The finely formed R0.3 mm contact radius produces a highly localised contact area that minimises contact uncertainty and reduces measurement averaging on small features. As an accessory for dial indicators, this measuring tip converts the instrument into a specialist probe for pinpoint checks, edge contacts and small-bore inspections. The small contact area is particularly advantageous for repeatability in high-frequency inspection tasks where consistent, reproducible contact geometry directly supports tighter process control and lower scrap rates. The design is targeted at metrology and inspection environments where reliable tactile repeatability is a decisive factor. Secure connection and fast integration into existing setups A standard M2.5 threaded shank ensures mechanical compatibility with a wide range of dial gauges that accept an M2.5 connection, allowing straightforward replacement of worn tips or swapping to task-specific geometries. The threaded interface provides a rigid, vibration-resistant joint that preserves alignment during short-stroke measurements and reduces the risk of slippage during repetitive checks. This connector format is common in industrial metrology, enabling rapid procurement and predictable fitment across many indicator brands and stands, which supports lean tool management in production or quality departments. Compact handling for intricate and confined measurements With an overall length of 13 mm and a stem diameter of 0.6 mm, the component is sized for access into narrow bores, small grooves and close-packed assemblies without compromising tactile control. The short profile reduces cantilever deflection and keeps the contact geometry stable, which is essential when measuring micromechanical parts or when a quick tactile verification is required on busy assembly lines. Supplied as an accessory within the Metav IndustryLine, the item is intended to extend the usability of standard indicators by offering a specialised contact option that blends ease of use with industrial robustness — ideal for workshop metrology and inspection benches. For application-specific advice on the Metav IndustryLine measuring tip (SKU M208.196) or to confirm compatibility with a particular dial indicator, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 for expert guidance and supply. Technical data SKU: M208.196 GTIN: 4054469183619 Weight: 0.1 kg Facts Tip radius: R0.3 mm Overall length: 13 mm Stem diameter: 0.6 mm Thread: M2.5 Special features Compatible with dial gauges with M2.5 connection thread Point-shaped contact for localised measurement Accessory for tactile inspection and small-feature checks Intended for precision metrology tasks FAQ What is the contact radius of the tip? The measuring tip features a radius of 0.3 mm, providing a finely localised contact area suitable for pinpoint checks with dial indicators. Which connection thread is required for this accessory? This accessory uses an M2.5 thread and is compatible with dial gauges that accept an M2.5 connection. How long is the measuring tip and where is it most useful? The overall length is 13 mm, making it especially useful for confined spaces, small bores and detailed inspection points. Is the stem diameter suitable for small-bore contacts? Yes, the 0.6 mm stem diameter and point geometry are designed for reliable contact in narrow features and micromechanical parts. Does the product listing include information about calibration or certification? The product data supplied does not specify a calibration certificate or calibration status for this accessory Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
14.5 mm Ruby Replacement Probe For Fine Probe 18/14.5 Mm, - Metav IndustryLine
Take advantage of a durable ruby contact tip and model compatibility for consistent measurement results; the precision replacement stylus reduces downtime and keeps fine-probe systems ready for production. Order genuine parts via Metav Werkzeuge or consult their specialists for application advice. Ruby replacement stylus M208.002.5 — Fine-probe replacement tip, 14.5 mm (Metav IndustryLine) A ruby replacement stylus for fine-probe contact measurement, compatible with models 208.004.8 and 208.004.9 and suited to tight, high-precision measuring tasks. Ruby contact tip for durable measurement Compatible with models 208.004.8 and 208.004.9 Precision length 14.5 mm for tight spaces Simple replacement for fine probe assemblies Engineered for repeatable contact precision The replacement stylus uses a ruby contact tip, chosen for its wear resistance and stable surface properties, which helps to maintain repeatability over many measurement cycles. In fine-probe applications this means contact conditions remain consistent, reducing drift and rework. The compact geometry, with a nominal length of 14.5 mm, is beneficial when access is limited and a stable contact point is required. This combination of durability and compact design supports reliable inspection workflows and lowers total cost of ownership by extending service intervals. Fits existing fine-probe systems with straightforward replacement Designed specifically as a replacement for the fine-probe family, the stylus is fully compatible with the 208.004.8 and 208.004.9 assemblies, ensuring a direct swap without modification to the probe body. The precision fit preserves the original probe alignment, which is critical for dimensional checks where even small offsets affect results. Using a genuine Metav IndustryLine spare reduces the risk of incorrect seating or electrical contact issues and keeps calibration requirements predictable, so measurement tasks remain efficient and traceable. Practical benefits for workshop and quality-control use For workshop engineers and QC technicians, the main advantages are fast servicing and consistent measurement quality. The ruby tip resists abrasion when measuring hard or slightly rough surfaces, and the stylus geometry allows confident contact on small features. Replacing a worn tip restores the probe’s original performance without the need for instrument replacement. Sourcing authentic parts from a dedicated supplier also simplifies inventory management and helps maintain a clear quality chain in inspection processes. For secure, genuine replacements and application guidance, contact Metav Werkzeuge to arrange the correct Metav IndustryLine stylus and ensure uninterrupted measuring accuracy. Technical data Article number: M208.002.5 GTIN: 4054469103495 Model compatibility: 208.004.8, 208.004.9 Weight: 0.1 kg Length: 14.5 mm Facts Customs tariff number: 90179000 eClass: 21170333 ETIM: EC000029 Special features Ruby contact tip Replacement stylus for fine probe assemblies Accessory category: measuring device accessories Compact geometry for confined measurement points FAQ What models is this replacement stylus compatible with? The replacement stylus is compatible with models 208.004.8 and 208.004.9 and is supplied as the genuine Metav IndustryLine spare M208.002.5. Why is a ruby tip used for this stylus? A ruby tip offers high wear resistance and a stable contact surface, which preserves repeatability and extends the interval between replacements compared with softer materials. What length does the stylus have and when is that useful? The stylus has a nominal length of 14.5 mm, which is suited to tight or recessed measurement points where a compact contact geometry is required. Can the stylus be fitted without special tools? The stylus is designed for straightforward replacement in the corresponding fine-probe assemblies; correct seating maintains probe alignment and measurement integrity. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
140mm Magnetic Indicator Stand With 135mm Cross Arm, 30kg Permanent Base - Metav IndustryLine
Compact magnetic mounting with 30 kg holding capacity and a low 140 mm profile supports reliable indicator work; combine this stability with the permanent magnetic base and adjustable cross arm for consistent measurement set-ups. Order the item directly via Metav Werkzeuge or ask our consultants for application advice. Magnet-Messstativ M208.111.2 – small magnetic stand, 30 kg holding force, 140 mm height (Metav IndustryLine) A compact Magnet-Messstativ M208.111.2 designed to secure dial gauges or test indicators with a dovetail guide; the permanent magnetic base and slim column make it ideal for confined benches and machine-side inspections Compact 140 mm overall height 30 kg magnetic holding force Permanent magnetic base Ø40×30 mm Stable mounting for accurate, repeatable readings The small magnetic stand delivers a stable measuring platform by combining a sturdy permanent magnetic base with a compact column and cross arm. The result is reduced micro‑movement during readings and fewer re‑set operations on the shop floor. Thanks to the dovetail-compatible top, dial gauges and test indicators with a dovetail guide are held securely, which simplifies setup and limits indicator deflection. This dependable clamping reduces measurement variation and speeds up routine quality checks without relying on heavy or cumbersome fixtures. Space-saving design that retains rigidity and accessibility With an overall height of 140 mm and a lightweight construction of 0.5 kg, the stand offers a small footprint while maintaining the rigidity required for repeatable measurements. The base dimensions and arm geometry—including a cross arm and column engineered for minimal flex—allow close placement to workpieces and access to tight machine areas. The compact form factor speeds alignment and repositioning tasks, lowering setup times in production environments where bench space and quick changeovers are valuable. The configuration supports efficient workflows and consistent results. Universal application across inspection and workshop tasks As a universal magnetic stand, this model suits general workshop measuring, machine inspection, and bench‑level quality control. The permanent magnetic base provides trustworthy holding force for magnetic surfaces, and the combination of column and cross arm sizes supports versatile indicator positions. For operations that require frequent indicator changes or multiple measuring points, the stand offers a practical balance between manoeuvrability and stability. The reliable mechanical function, paired with a straightforward mounting interface, makes it suitable for both experienced operators and those new to workshop metrology. For dependable workshop mounting choose the Metav IndustryLine magnetic stand and contact Metav Werkzeuge in Emmerich for tailored advice and supply: info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M208.111.2 GTIN: 4054469159478 Tariff number: 90319000 Facts Overall height: 140 mm Weight: 0.5 kg Magnet strength: 24 Holding capacity (label): 30 kg Special features Permanent magnetic base Foot: Ø40×35, M6 Foot plate / permanent foot: 40 × 30 mm Cross arm: Ø8×135 Column: Ø8×105, M4 Suitable for dial gauge or test indicator with dovetail guide Universal application FAQ What holding force does the magnetic stand provide? The magnetic stand offers a labelled holding capacity of 30 kg and a listed magnet strength value of 24; this ensures secure placement on ferrous surfaces during inspection tasks. Is the magnetic base permanent or switchable? The base is a permanent magnetic base, designed for continuous holding force without a switch mechanism. Which indicators are compatible with the stand? Dial gauges or test indicators with a dovetail guide fit the top mounting; the stand is intended for standard dovetail‑type indicator interfaces. How compact is the stand for machine‑side work? With an overall height of 140 mm and a slim profile, the stand is compact enough for machine‑side measurements and tight bench spaces while still providing stable support. Is this stand suitable for repeated on‑machine inspections? Yes; the combination of permanent magnetic base and adjustable arm geometry allows for quick repositioning and reliable readings across repeated inspection cycles. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
145mm Small Magnetic Stand With 8mm Universal Shank And Central Force Clamp - Metav IndustryLine
Compact dimensions, a central‑force clamp and compatibility with standard 8 mm shank indicators make this stand a practical choice for tight workspaces and repeatable measurement setups; order the small indicator stand directly via Metav Werkzeuge or consult our specialists for tailored advice. Small magnetic indicator stand, 145 mm, 8 mm holder with central‑force clamp (M208.112.S) — Metav IndustryLine The Small magnetic indicator stand, 145 mm, 8 mm holder with central‑force clamp is a compact magnetic post for dial indicators and measuring probes, designed for workshop inspection and precision set‑ups in confined spaces. Compact 145 mm stand for confined spaces Central‑force clamping for secure holding 8 mm cylindrical rod holder Magnetic base with 185 mm overall height Stable repeatability from compact engineering The small magnetic post delivers reliable holding power in a space‑saving package. Thanks to the central‑force clamp, the holding force is applied evenly around the shank, reducing slippage and angular movement during measurement. This results in repeatable readings when working with dial indicators that use an 8 mm shank or a dovetail mount. The balanced design minimises operator‑induced variation and supports efficient gauge checks on production or inspection benches. Designed for tight workplaces and quick set‑ups A compact footprint and lightweight construction make the stand particularly suitable where bench space is limited. The 40 x Ø8 mm receiver accommodates cylindrical indicator stems while the measured 185 mm overall height keeps the centre of gravity low for improved stability. These attributes combine to shorten set‑up time and increase throughput in small‑batch or toolroom environments, providing a tangible increase in daily efficiency without sacrificing measurement quality. Compatibility and universal application The instrument is specified for use with common dial indicators featuring an 8 mm shank or dovetail mount, enabling broad compatibility across legacy and modern gauges. The universal character of the design supports simple integration into existing inspection routines and fixture arrays, reducing the need for multiple specialised stands. For teams prioritising versatility, this stand acts as a reliable single‑item solution for a variety of tasks. Practical handling and transport considerations With a mass of approximately 0.2 kg, the stand is easy to position and reconfigure on the workshop floor, facilitating fast changes between operations. The arm and post dimensions (74 x 55 x 12 mm) provide a compact but rigid support that keeps the indicator aligned during inside, outside and step measurements. The overall build emphasises robust handling and a long service life under routine workshop conditions. For tailored advice on the Metav IndustryLine indicator stand and local supply from Emmerich, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss application fit and delivery options. Technical Data Article number: M208.112.S GTIN: 4054469104812 Category: Magnetstative Manufacturer: Metav IndustryLine Facts Overall height: 185 mm Weight: 0.2 kg Arm dimensions: 74 x 55 x 12 mm Receiver: 40 x Ø8 mm Zolltarifnummer: 90319000 Special features Central‑force clamp for secure holding Universal design for broad compatibility Suited to dial indicators with 8 mm shank and dovetail mount Compact, low‑profile magnetic indicator stand FAQ Which indicators fit this stand most reliably? The small magnetic indicator stand (Metav IndustryLine M208.112.S) is designed for dial indicators with an 8 mm shank and those using a dovetail mount, ensuring secure seating and reliable readings. Is the base magnetic and suitable for metal workbenches? Yes — classified under magnetic stands, the unit features a magnetic base that provides stable attachment on ferrous surfaces for routine inspection tasks. How does the central‑force clamp improve measurements? The central‑force clamp in the M208.112.S applies even pressure around the indicator stem, reducing tilt and slippage so that repeatability and accuracy are improved during repeated measurements. Is the stand convenient to reposition during shop work? At approximately 0.2 kg and with a compact arm, the stand is deliberately lightweight and easy to move, enabling quick re‑setups between operations without excessive handling effort. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm Capacitive Linear Probe Digital, 0.1µm Resolution, Cable Included - Microtech Metrology
Improve inspection throughput by combining 0.0001 mm resolution, ±0.007 mm accuracy and a secure Ø8‑h6 shank interface for repeatable measurements; order the probe directly via Metav Werkzeuge or consult our technical team for application advice. Microtech Metrology Digital Probe – Digital Indicator, 0–150 mm Range The Digital Probe is a compact digital indicator designed for displacement measurement in quality control and shop-floor inspection, offering a balance of sensitivity and robustness for both laboratory and production environments. Digital readout with 0.0001 mm resolution Measurement range 0–150 mm for broad coverage ±0.007 mm accuracy for repeatable results Includes 2 m cable for direct integration High-resolution measurement that stabilises process control With a resolution of 0.0001 mm and an accuracy of ±0.007 mm, this digital instrument delivers the fine discrimination required for precise dimensional checks. The specified figures mean typical deviations are limited to a few micrometres, which helps to reduce false rejects and rework in serial inspection tasks. Using a digital readout reduces reading errors compared with analogue dials and speeds up documentation, supporting faster, data-driven decisions on the production line. Secure mounting and consistent contact for reliable readings The probe uses a conventional Ø8‑h6 shank interface that fits standard indicator holders and inspection stands, ensuring stable positioning during measurement cycles. A controlled measuring force of 3.2–5.2 N provides consistent contact pressure, reducing operator‑dependent variation and improving repeatability between checks. The supplied 2 m cable simplifies wiring to consoles or data loggers and helps integrate the unit into existing test rigs without additional accessories. Practical range and workflow advantages for inspection tasks Covering a 0–150 mm travel, the instrument is suitable for a wide array of workshop and bench inspections, from small components to medium-sized assemblies. The digital format accelerates routine checks and comparative measurements, increasing throughput on incoming inspection and in-process control. As a Microtech Metrology device, the instrument pairs practical robustness with metrology-grade performance, making it a suitable choice where traceable, repeatable results are required. For precision measurement needs with Microtech Metrology’s digital probe, contact Metav Werkzeuge for tailored advice and procurement support. Technical Data Article number: 120129507P GTIN: 4061905458224 Manufacturer: Microtech Metrology Category: Digital indicator / probe Facts Measuring range: 0–150 mm Resolution: 0.0001 mm Accuracy: ±0.007 mm Measuring force: 3.2–5.2 N Shank: Ø8‑h6 Special features Digital instrument Cable included: 2 m Compact design for bench and stand mounting Suited to quality control and process inspection FAQ What resolution and accuracy does the probe offer? The Microtech Metrology digital probe (SKU 120129507P) provides a resolution of 0.0001 mm and an accuracy of ±0.007 mm. Is the probe ready to connect to test equipment? Yes. The instrument is delivered with a 2 m cable for direct connection to measurement consoles or data capture devices. Which mounting interface is required? The probe uses an Ø8‑h6 shank, compatible with standard indicator holders and inspection stands used in workshop and laboratory settings. What measuring range is available for routine inspection? This digital indicator covers a measuring range of 0–150 mm, making it suitable for small to medium component checks. Can the probe help reduce inspection time and errors? By combining a digital readout with fine resolution and controlled measuring force, the device reduces reading errors and improves repeatability, contributing to faster and more reliable inspection cycles. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
150mm Depth Measurement Bridge For Dial Indicator 150 x 17 mm Ø8 mm Mount Matt Chrome, Ground And Lapped - Metav IndustryLine
Combine robust construction, precision-ground measuring faces and a standard 8 mm mounting for fast, repeatable depth checks; order this depth measuring bridge directly via Metav Werkzeuge or contact our consultants for application advice. Depth measuring bridge for dial gauge, 150 x 17 mm — Ø 8 mm mounting (Metav IndustryLine) Depth measuring bridge for dial gauge, 150 x 17 mm, Ø 8 mm *Precision-ground and lapped measuring faces *150 mm span for stable depth measurements *8 mm standard dial gauge mounting *Matt chrome-plated corrosion resistance Robust precision for repeatable depth checks The depth measuring bridge is built for reliable depth measurement in both workshop and laboratory environments. Its matt chrome-plated body resists corrosion while the measuring faces, ground and lapped, provide flatness and low wear, ensuring repeatable contact conditions. With a nominal span of 150 mm and compact cross-section (150 x 17 mm), the accessory reduces set-up time for repetitive depth gauging and stabilises results when paired with a dial gauge. Quick, standardised mounting and compatibility Mounting is straightforward: the bridge accepts any dial gauge with an 8 mm shank, enabling immediate integration with existing indicator sets and reducing tool-change overheads. The precision-machined socket and the moderate overall height (37 mm) keep the gauge axis well aligned, which lowers mechanical misalignment and measurement scatter. The compact mass (approx. 0.3 kg) gives a stable base without being cumbersome to handle or store. Durable design that supports routine metrology workflows Engineered as an accessory for industrial metrology, the bridge’s finish and bearing surfaces minimise friction and long-term wear, translating into sustained accuracy and fewer recalibrations. The combination of a hardened, finished contact area and a corrosion-resistant plating makes it suitable for daily use in production checks, fixture set-up and bench inspections. The accessory is a practical choice where repeatability and ease of mounting are priorities. For application-specific advice or to order this matt chrome-plated depth measuring bridge with an 8 mm mounting, contact Metav Werkzeuge for direct support and delivery arrangements. Technical data Article number: M208.061.2 GTIN: 4061905042591 Manufacturer: Metav IndustryLine Material finish: matt chrome-plated Measuring faces: ground and lapped Suitability: for all dial gauges with 8 mm mounting Category: Accessory — metrology Facts Span: 150 mm Cross-section: 150 x 17 mm Overall height: 37 mm Weight: 0.3 kg Special features Precision ground and lapped contact surfaces Standard 8 mm dial gauge socket Corrosion-resistant matt chrome plating Compact, workshop-suitable geometry FAQ What gauges are compatible with this bridge? The depth measuring bridge is compatible with any dial gauge that has an 8 mm shank; the precision socket secures the gauge for stable depth measurements. How does the finished measuring face affect accuracy? Ground and lapped measuring faces on the bridge provide flat contact surfaces that reduce wear and maintain repeatability for depth checks during series inspections. Is the bridge suitable for use in production environments? Yes, the matt chrome-plated finish and robust machining make the accessory suitable for routine shop-floor use and bench inspections as part of standard metrology workflows. What are the main dimensional features relevant for fixturing? Key dimensions are a span of 150 mm, cross-section 150 x 17 mm and overall height of 37 mm, which facilitate mounting in common test rigs and fixtures. Can the bridge be used to improve measurement throughput? By providing a stable, quick-to-mount platform for a dial gauge, the bridge reduces set-up time and helps achieve consistent checks across repeated operations. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm Dial Indicator Digital With mm/inch, Preset, Hold, Mode, USB, IP65, ISO 17025 Calibrated - Microtech Metrology
Combining IP65 protection with USB data output and ISO 17025 calibration delivers reliable, traceable readings under workshop conditions; the instrument's 0–150 mm range and ±0.02 mm accuracy make it well suited to standard inspection tasks. Order the device directly via Metav Werkzeuge or consult the Metav team for technical advice. Digital indicator by Microtech Metrology — 0–150 mm, IP65, USB The Digital indicator is a robust, workshop-ready measuring instrument for precise dimensional checks and data capture in production and inspection environments. IP65 protection for harsh environments USB data output for traceable recording ISO 17025 calibration certificate included 0.02 mm accuracy with 0.001 mm resolution Consistent, traceable measurements for production control The Microtech Metrology digital indicator combines a fine 0.001 mm display resolution with a verified accuracy of ±0.02 mm, enabling reliable detection of small dimensional deviations during routine inspection. Delivered fully calibrated to ISO 17025, the instrument arrives with a traceable calibration certificate, which simplifies audit processes and supports quality documentation. The specified measuring force of 3–5 N contributes to repeatable contact conditions, reducing operator-induced variation and supporting consistent, comparable results across multiple operators or shifts. Durable construction that withstands everyday workshop use A sealed housing with IP65 rating protects internal electronics from dust and splash water, so the gauge remains operational in machining bays and near coolant mist. Power is supplied by a compact CR2032 3V battery for straightforward replacement and long standby life, while tactile controls (including PRESET, HOLD and MODE) allow quick on-site adjustments and temporary data locking without the need for a computer. The combination of robust sealing and intuitive controls reduces downtime and keeps inspection routines efficient under industrial conditions. Streamlined data transfer and quality workflows Integrated USB data output turns manual readings into digital records suitable for SPC and inspection reports, cutting transcription errors and accelerating trend analysis. The straightforward mm/inch switching and preset functionality allow the instrument to be incorporated into diverse measurement stations and quality plans. For manufacturers and inspection departments seeking demonstrable traceability and faster reporting, the instrument supports both immediate decisions at the machine and systematic data collection for process improvement. Request a detailed quotation from Metav Werkzeuge for the Microtech Metrology digital indicator (SKU 120125952) and benefit from verified ISO 17025 calibration and dependable European dispatch Technical Data Article number: 120125952 GTIN: 4061905453571 Manufacturer: Microtech Metrology Facts Measurement range: 0–150 mm Resolution: 0.001 mm Accuracy: ±0.02 mm Measuring force: 3–5 N Battery: CR2032 3V Protection class: IP65 Features Digital display with mm/inch, PRESET, HOLD and MODE USB data output Delivered fully calibrated to ISO 17025 with certificate Compact, workshop-suitable housing FAQ What measurement range does the indicator cover? The Microtech Metrology digital indicator covers a measurement range of 0–150 mm, suitable for standard workshop inspection tasks. Is the instrument delivered calibrated? Yes — the instrument is supplied fully calibrated to ISO 17025 and includes the corresponding calibration certificate. How is measurement data exported from the device? Data can be exported via the integrated USB data output for direct capture into SPC software or inspection logs. What protection does the housing provide against contaminants? The housing is rated IP65, offering dust-tight construction and protection against water jets for reliable operation in workshop environments. Which battery type is required and how long does it typically last? The gauge uses a CR2032 3V battery; battery life depends on usage patterns, but the cell is a commonly available type allowing quick replacement. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
150mm Dial Test Indicator Digital With mm/inch Display, PRESET/HOLD/MODE, USB, IP65, ISO 17025 Calibrated - Microtech Metrology
Take advantage of precise readings, robust protection and seamless data transfer for dependable inspection and process logging; the combination of 0–150 mm measuring range, 0.01 mm accuracy and USB output supports efficient quality workflows. Order the digital indicator directly via Metav Werkzeuge or ask our consultants if needed. Microtech Metrology Digital Indicator 0–150 mm (IP65, USB) The Digital indicator from Microtech Metrology is a workshop-grade electronic measuring instrument for standard metalworking and inspection tasks, offering reliable 0–150 mm measurement with sealed housing and digital data output. ISO 17025-calibrated delivery incl. certificate IP65 dust and splash protection USB data output for digital recording 0–150 mm range with 0.01 mm accuracy Faster, traceable measurements that reduce rework The electronic gauge delivers highly reproducible readings thanks to its technical balance of readout resolution and specified accuracy. With a reading resolution of 0.001 mm and a stated accuracy of 0.01 mm, the unit separates fine positional changes from routine variation; this means fewer repeat checks and clearer go/no-go decisions during production control. The modest measuring force (3–5 N) minimises deflection at contact points, supporting consistent results on machined surfaces and assemblies while the numeric precision simplifies statistical process control and documentation. Robust design and direct data integration for modern workshops Engineered for everyday shop use, the instrument carries an IP65 rating to resist dust and splash exposure, reducing downtime from accidental contamination. The display offers convenient functions—mm/inch switching, PRESET, HOLD and MODE—for rapid adaptation between tasks. Integrated USB data output enables direct logging to inspection software or spreadsheets, eliminating manual transcription errors and speeding up reporting. Powered by a CR2032 3V cell, the unit balances long stand-by life with compact electrical design suited to bench and portable inspection. Calibrated and classification-aligned for quality assurance Delivered fully calibrated to ISO 17025, the instrument arrives with a traceable calibration certificate, meeting the requirements for formal inspection and audit processes. Classified within the standard measuring class (0–300 mm) and specified here for 0–150 mm, it suits machine shops, toolrooms and quality laboratories that need a compromise of reach and stiffness. The combination of factory calibration, clear digital readout and data export provides both a defensible measurement chain and an immediate fit into documentation procedures used in serial production and incoming inspection. For traceable inspection work, order the Microtech Metrology digital indicator via Metav Werkzeuge — contact our Emmerich consultants for technical advice and delivery arrangements Technical Data Article number: 120125954 GTIN: 4061905453588 Manufacturer: Microtech Metrology Facts Measuring range: 0–150 mm Resolution (reading): 0.001 mm Accuracy: 0.01 mm Measuring force: 3–5 N Protection rating: IP65 Special features Digital display with mm/inch, PRESET, HOLD, MODE USB data output Delivered calibrated to ISO 17025 incl. certificate Battery: CR2032 3V Standard class indicator for workshop inspection FAQ What is the measuring range and typical use for this indicator? The Microtech Metrology digital indicator covers 0–150 mm and is designed for standard workshop and quality-control tasks where a balance of reach and rigidity is required. Does the unit come calibrated for inspection work? Yes; the instrument is supplied fully calibrated to ISO 17025 and includes a traceable calibration certificate suitable for audit and inspection documentation. How is measurement data exported for reporting? Measurement values can be exported directly via the USB data output to logging software or a PC, allowing integration into SPC workflows without manual entry. What protection does the housing provide in a production environment? The housing is rated IP65, offering dust-tight protection and resistance to water jets or splashes commonly encountered in workshop settings. What power source does the indicator use and how long does it last? The unit uses a CR2032 3V battery; actual service life depends on usage patterns and power-saving settings, but the cell type provides compact, replaceable power for portable inspection. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
150mm Dial Test Indicator Digital With mm/inch, Preset, Hold, Mode, USB, IP65, ISO 17025 Calibrated - Microtech Metrology
Take advantage of the combination of repeatable accuracy, robust workshop protection and USB data output for fast, traceable inspection routines. Order this precision instrument directly via Metav Werkzeuge or consult the specialists for integration and calibration advice. Digital Dial Gauge — 0–150 mm range, USB output (Microtech Metrology) The Digital Dial Gauge is a workshop-ready digital indicator for dimensional inspection and quality control in machining and assembly environments, offering USB data transfer and IP65 protection for reliable use at the bench or on the production line. Digital dial gauge, range 0–150 mm Resolution 0.01 mm, accuracy ±0.03 mm USB data output and mm/inch display IP65 protection, robust for workshop use Repeatable precision for daily quality control The gauge delivers high-resolution readings with a display step of 0.01 mm and an indicated accuracy of ±0.03 mm, which suits standard industrial inspection tasks. With a measuring range of 0–150 mm, the instrument classifies as a standard caliper‑class device that balances reach and stiffness for general machining and metalwork. The compact measuring system reduces operator-induced variability and helps maintain consistent tolerances across production batches, supporting quicker acceptance testing and fewer reworks. Reliable data capture and workshop durability Equipped with USB data output, the instrument simplifies data logging and process documentation by feeding measurement values directly into spreadsheets or quality systems. The enclosure meets IP65 protection, shielding electronics from dust and low‑pressure water jets—an advantage in busy workshop environments. Powered by a CR2032 3V cell, the indicator combines low maintenance with an unobtrusive form factor, while the specified measuring force 3–5 N ensures reproducible contact pressure for consistent measurements. Traceable calibration and compliance Delivered fully calibrated and traceable to ISO 17025, the device includes a calibration certificate, providing documented conformity for audit cycles and supplier qualification. This traceability supports formal quality systems and reduces administrative effort when proving measurement capability. For procurement teams and quality managers, the included certificate removes uncertainty about instrument readiness and ensures immediate usability in regulatory or customer-controlled processes. Practical ergonomics and integration features The instrument’s digital display supports mm/inch readout and offers PRESET, HOLD and MODE functions for flexible measurement workflows. PRESET accelerates setpoint entry for go/no-go checks; HOLD freezes unstable readings for easier documentation; MODE toggles measurement behaviours to suit different tasks. The USB interface and straightforward control set mean rapid integration with existing inspection benches or portable data-collection routines, saving operator time and reducing transcription errors. Choose the Microtech Metrology digital dial gauge from Metav Werkzeuge for ISO 17025 traceability and seamless USB data capture — contact Metav Werkzeuge in Emmerich for technical advice at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 120125951 GTIN: 4061905453564 Brand: Microtech Metrology eCl@ss: 21170308 Facts Measuring range: 0–150 mm Resolution (display): 0.01 mm Accuracy: ±0.03 mm Measuring force: 3–5 N Protection class: IP65 Power: CR2032 3V Special features USB data output for direct capture Digital display with mm/inch, PRESET, HOLD, MODE Delivered calibrated to ISO 17025 with certificate Robust construction for workshop environments FAQ What measurement range does this indicator cover? The digital dial gauge from Microtech Metrology covers a measuring range of 0–150 mm, suitable for standard workshop and machine‑shop inspection tasks. Is the instrument supplied calibrated? Yes, the device is delivered fully calibrated to ISO 17025 and includes a calibration certificate for immediate, traceable use in quality control. How are measurement values exported for documentation? Measurement values can be exported via the USB data output to a PC or data logger, enabling direct logging into quality systems or spreadsheets. What level of protection does the housing provide? The instrument is rated IP65, which protects against dust ingress and low‑pressure water jets, making it robust enough for typical workshop conditions. Which display and control functions are available? The indicator features a digital readout with mm/inch switching and PRESET, HOLD and MODE buttons to speed up common inspection routines. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
150mm Digital Dial Indicator Color 2.4" Touchscreen Wireless USB Modbus PLC Connection, 0.008mm Accuracy - Microtech Metrology
Benefit from the combination of high-resolution measurement, a responsive 2.4" colour touchscreen and flexible wireless and USB data export to keep quality control reliable and traceable; order the instrument directly via Metav Werkzeuge or consult our specialists for system integration. Digital Dial Gauge — 0–150 mm range with 2.4" colour touchscreen (Microtech Metrology) Digital Dial Gauge 0–150 mm, designed for precise shop-floor and inspection use, offers fast readings and modern data transfer for seamless process control 0–150 mm measuring range 2.4" colour touchscreen display Wireless and USB data output High reading resolution 0.0001 mm Precision that supports process control A measurement device with a 0–150 mm span and a resolution of 0.0001 mm delivers the repeatability required in production and incoming inspection. The instrument’s stated accuracy of ±0.008 mm positions it for fine tolerance checks where small deviations matter; the specified measurement force 3.2–5.2 N contributes to repeatable contact conditions and reduces variation caused by manual probing. These technical values translate into fewer rejected parts and more consistent process data when control limits are tight. Effortless data capture and traceability Integrated Wireless and USB outputs enable direct transfer of readings into inspection routines, SPC software or batch reports, removing error-prone manual transcription. The 2.4" colour touchscreen provides immediate visual confirmation of live values and simple menu navigation, which accelerates measurement cycles and shortens training time for new operators. The digital readout combined with reliable data transfer supports fast decision-making and smoother documentation for audit trails. Designed for repeatable measurements on the shop floor The compact, digital construction focusses on robust handling and clear legibility in workshop conditions. Ergonomic controls and a bright display reduce operator strain and make subsequent checks faster; the stable measurement force range helps to maintain reproducible contact across many cycles. Supplied by Microtech Metrology, this dial gauge suits routine in-process checks as well as quality-lab spot verifications, offering a practical link between bench inspection and digital quality management. Contact Metav Werkzeuge today to discuss integration options or request a tailored quotation for the Microtech Metrology digital dial gauge (SKU 120139505M) — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 120139505M GTIN: 4061905453533 ECLASS: 21170308 Manufacturer: Microtech Metrology Facts Measuring range: 0–150 mm Resolution (display): 0.0001 mm Accuracy: ±0.008 mm Display: 2.4" colour touchscreen Measurement force: 3.2–5.2 N Data output: Wireless, USB Special features Digital dial gauge design Colour touchscreen interface Wireless and USB connectivity Suitable for production and inspection tasks Category: Dial gauge (dial indicator) FAQ What measuring range does the instrument cover? The digital dial gauge covers a measuring range of 0–150 mm, suitable for standard workshop and inspection tasks. What accuracy and resolution can be expected? The device offers an accuracy of ±0.008 mm with a display resolution of 0.0001 mm, which supports fine tolerance checks in quality control. How are readings exported for documentation? Readings are exported via Wireless and USB interfaces; the Microtech Metrology dial gauge (SKU 120139505M) is configured for direct transfer into data-collection or SPC systems. Is the display suitable for busy shop-floor conditions? Yes; the 2.4" colour touchscreen provides clear visibility and intuitive navigation, aiding rapid checks even under challenging workshop lighting. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
150mm Digital Dial Indicator With Colour Touchscreen, Wireless/USB Data Output, IP54, ISO 17025 - Microtech Metrology
Combine precise measurement with robust workshop connectivity: ±0.007 mm accuracy, Wireless+USB data output and IP54 protection support reliable inspection cycles and efficient data logging. Order the ISO 17025‑calibrated instrument directly via Metav Werkzeuge or consult our specialists for integration advice. Microtech Metrology digital dial indicator — 2.4″ colour touchscreen, Wireless+USB The digital dial indicator provides high‑resolution displacement measurement for production and inspection tasks, combining a 2.4" colour touchscreen with wireless and USB data capture for streamlined quality workflows. 2.4" colour touchscreen for clear readout Wireless and USB data output for logging IP54 protection against dust and splash Delivered calibrated to ISO 17025 standard High‑precision readings that speed up inspection This digital gauge delivers highly repeatable measurements with an accuracy of ±0.007 mm and a display resolution of 0.0001 mm, enabling confident decisions in incoming inspection and in‑process checks. The touch display presents readings clearly and reduces interpretation errors compared with analogue dials; numeric output and on‑screen menus simplify measurement sequences. The instrument’s measuring force of 3.2–5.2 N is optimised to minimise deformation on small features while maintaining stable contact, which helps to reduce measuring variability and rework. Connectivity and data integrity for modern workflows With Wireless+USB data output, the indicator transfers measured values directly to data acquisition systems and SPC software, removing manual transcription and accelerating traceable documentation. The 2.4" colour touchscreen also supports quick setup and mode selection on the device itself, which shortens cycle time at the bench. Built‑in IP54 protection ensures the electronics remain operational in routine workshop environments where coolant mist or swarf may be present, so uptime and measurement throughput stay high. Calibrated and ready for quality control The instrument is supplied fully calibrated to ISO 17025, with the calibration certificate included, providing a clear metrological basis for audit trails and quality records. This delivered calibration reduces lead time before first use and simplifies compliance with internal control plans. The compact digital design, combined with robust data interfaces and a protective enclosure, makes the gauge suitable as a dedicated inspection tool in laboratory benches and on shop‑floor measuring stations. Contact Metav Werkzeuge for application guidance or to request the ISO 17025‑calibrated Microtech Metrology indicator and technical integration support from our consultants Technical Data Article number: 120139505 GTIN: 4061905453304 Manufacturer: Microtech Metrology ECLASS: 21170308 ETIM: EC003591 Facts Measuring range: 0–150 mm Resolution: 0.0001 mm Accuracy: ±0.007 mm Measuring force: 3.2–5.2 N Protection class: IP54 Special features Colour 2.4" touchscreen display Wireless and USB data output Delivered calibrated to ISO 17025 (certificate included) Digital indicator for production and lab use FAQ What measuring range does the instrument cover? The instrument covers a 0–150 mm range and is therefore suited to standard dimensional checks in workshop and inspection tasks. Is the device suitable for use in a production environment with coolant or oil mist? Yes, the instrument has IP54 protection, which provides resistance to dust ingress and splash, making it suitable for typical workshop conditions. How is traceability ensured for quality documentation? The instrument is supplied fully calibrated to ISO 17025 and includes the calibration certificate for traceable measurement records. Which data interfaces are available for process integration? Measured values can be exported via Wireless+USB, enabling direct connection to SPC systems and data loggers for automated documentation. What is the display type and how does it improve usability? The 2.4" colour touchscreen offers clear numeric readouts and simple menu navigation, reducing setup time and operator error. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
150mm Lever-Type Dial Test Indicator 0.8mm Tip 0.01mm Graduation Swivel Measuring Head - Käfer Messuhrenfabrik GmbH & Co. KG
Take advantage of precise comparative measurement, flexible mounting and switchable lever movement for reliable inspection results; order the gauge directly via Metav Werkzeuge or consult our specialists for application advice. KÄFER Tastboy 0.8 mm lever-type measuring instrument — 0.01 mm graduation, DIN 2270 precision The KÄFER Tastboy 0.8 mm is a compact lever-type measuring instrument designed for high-precision comparative checks and workshop inspection tasks. 0.01 mm graduation DIN 2270 accuracy (5 µm) Switchable lever movement Mountable on Ø 8 mm h6 shank Precise measurement for repeatable quality control Built to support consistent inspection routines, this lever-type gauge combines a 0.01 mm graduation with an effective repeatability of 5 µm according to DIN 2270, which translates into dependable comparative readings on the shop floor. The fine graduation allows visual detection of small deviations, while the standardised accuracy class offers a verifiable basis for acceptance checks and process control. Such clarity reduces rework and helps maintain a steady production flow. Integration and adjustment that suit busy benches Engineered for easy integration into fixtures and stands, the instrument accepts the clamping shank from the top or bottom and fits a Ø 8 mm h6 mount, enabling versatile set-ups in tight inspection rigs. The switchable lever movement and a measuring head that swivels up to 110° ensure ergonomic access to the test point; a 2.3 mm steel ball contact tip provides a durable bearing surface for consistent tactile response. These features simplify repetitive measurements and speed up part verification without compromising accuracy. Compliance, serviceability and everyday robustness The design is inspection-compliant, making it suitable for calibrated control loops and routine verification in quality departments. Parallel-to-dial adjustment of the measuring insert helps align the contact geometry for best readability, while the rotatable scale supports rapid interpretation of results from different angles. Constructed with workshop use in mind, the instrument offers a balance of precision and resilience that reduces downtime and supports long-term measurement stability. Contact Metav Werkzeuge for tailored advice on integrating the Käfer lever-type measuring instrument into inspection processes and secure supply from our Emmerich facility — info@metav-werkzeuge.com / +49 2822 7131930 Technical Data Article number: 4000851646NW Product: Lever-type measuring instrument Tastboy 0.8 mm, 0.01 mm graduation, KÄFER Product type: Feeler lever measuring instrument Packaging unit: 1 UID: 4000851646NW Facts Tip diameter: 0.8 mm Graduation: 0.01 mm Accuracy/Repeatability: 5 µm (DIN 2270) Contact ball: 2.3 mm Shank diameter: Ø 8 mm h6 Measuring head swivel: 110° Special features Switchable lever movement Measuring insert rotatable and tiltable parallel to dial Mounting top or bottom on Ø 8 mm h6 shank Inspection-compliant FAQ What resolution and accuracy can be expected from this gauge? The gauge provides a 0.01 mm graduation and an effective repeatability of 5 µm in accordance with DIN 2270, so it is suitable for fine comparative checks and routine inspection tasks. Can the unit be mounted in different orientations? Yes. The instrument accepts a clamping shank Ø 8 mm h6 at the top or bottom and the measuring head can be swivelled up to 110°, allowing flexible fixture and stand arrangements. What is the contact tip made of and why does that matter? The contact is a 2.3 mm steel ball, chosen for wear resistance and consistent contact geometry, which helps maintain repeatable readings over extended use. Is the instrument suitable for use in a production quality station? Yes. As an inspection-compliant lever-type measuring instrument, the device is designed for bench-level quality checks and integration into calibrated measurement routines. How is the lever movement adapted to different measurement situations? The unit features a switchable lever movement, which allows the operator to change the direction or mode of the feeler action to suit varying part geometries and access constraints. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
15mm Dial Indicator Contact Plate Thread M2.5 Compatible - Metav IndustryLine
Take advantage of a compact accessory that combines a flat 15 mm contact face with a standard M2.5 threaded connection for reliable, repeatable readings on compatible dial indicators. Benefit from a lightweight, precisely machined contact that simplifies retrofitting and replacement in inspection setups; order directly via Metav Werkzeuge or consult the team for application advice. M208.175 Measuring contact – flat 15 mm contact face, M2.5 thread (Metav IndustryLine) A M208.175 measuring contact designed for dial indicators, offering a flat Ø15 mm contact face and an M2.5 connection thread for consistent point contact in workshop and inspection tasks. Flat 15 mm contact face M2.5 threaded connection Compatible with M2.5 dial indicators Lightweight 0.1 kg design Reliable contact geometry for reproducible readings The flat 15 mm contact face provides a defined support area that reduces local deformation and helps maintain repeatable measurement results on flat or slightly curved surfaces. Where consistent tactile feedback matters, the robust contact geometry minimises lateral movement during probing, supporting precise analogue and digital gauge readings. The accessory is produced to industry-compatible dimensions and is suitable for standard inspection routines, contributing to reduced measurement scatter and faster inspection cycles through predictable behaviour. Straightforward compatibility and quick retrofit Designed as an accessory for dial indicators with an M2.5 connection thread, the component ensures direct compatibility with common indicator mounts and extension stems. The M2.5 threaded interface enables rapid replacement or tool-change within existing measuring chains without adapters, saving time during set-up or maintenance. For workshops integrating gauges across several machines, the standard thread and compact form support consistent tool inventory and straightforward stock management. For additional technical clarification, Metav Werkzeuge offers application guidance and specification support. Practical in daily inspection and adaptable across uses Lightweight yet precisely machined, this contact tip suits bench inspection, production sampling and field checks where a defined contact face is required. The small mass (0.1 kg) reduces pendulum effects on delicate indicators and eases handling during frequent changeovers. As a general-purpose accessory in measuring instrument sets, the part complements existing gauge portfolios and helps maintain measurement quality across shifts. Selecting standard, proven interfaces simplifies procurement and keeps measurement chains interoperable across toolrooms and quality labs. Contact Metav Werkzeuge today to specify the M208.175 measuring contact from Metav IndustryLine and secure the precise accessory required for consistent dial indicator performance. Technical data Article number: M208.175 GTIN: 4054469105253 ECLASS: 21170324 Tariff number: 90319000 Facts Weight: 0.1 kg Contact diameter: 15 mm Connection thread: M2.5 Special features Flat contact face, Ø15 mm Threaded connection M2.5 Accessory for dial indicators Category: Measuring instruments – accessories FAQ Is this contact compatible with common dial indicators? The measuring contact is compatible with dial indicators that accept an M2.5 connection thread; it is intended as a direct replacement or accessory for such instruments. What measurement tasks suit a flat 15 mm contact face? A flat 15 mm face is suitable for obtaining stable, repeatable readings on flat or gently curved surfaces where a defined support area reduces local deformation and improves consistency. How is the component mounted to an indicator? Mounting is via the M2.5 threaded interface; the threaded connection allows straightforward replacement without additional adapters on indicators with matching threads. Does the contact affect indicator sensitivity or response? The lightweight, precisely machined contact minimises added mass and lateral play, preserving the indicator’s responsiveness while providing a stable contact area for repeatable results. Can this part be used in production environments? Yes; the design supports frequent changeovers and routine inspection tasks, making it suitable for production sampling, workshop measurements and quality-control benches. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
15mm Digital Dial Gauge With 0.001mm Readout, 270° Rotating Display, USB-C Rechargeable Battery - Metav IndustryLine
Take advantage of the combination of high metrological precision, a 270° rotatable display and convenient USB‑C data transfer for faster inspection cycles and reliable traceability. Order the instrument directly via Metav Werkzeuge or consult our advisors for application-specific advice. Digital dial gauge M301.076 — 0–15 mm, 0.001 mm resolution (Metav IndustryLine) The Digital dial gauge M301.076 is a compact precision indicator for fine inspection tasks in workshops and production, designed for quick readings, reversible measurement and straightforward data capture. 0.001 mm resolution, ±0.003 mm accuracy 270° rotatable display for optimal readability USB‑C data output and rechargeable lithium battery High repeatability of 0.002 mm Precise measurement for routine quality control The instrument delivers 0.001 mm resolution combined with an accuracy of ±0.003 mm, making it suitable for high-precision shop-floor checks and assembly verification. With a repeatability of ±0.002 mm, the gauge provides consistent results when comparing multiple batches or when used in tolerance control. The compact format and modest weight facilitate rapid fixturing while the 60 mm outer ring keeps the visual scale clear; this balance of small footprint and metrological performance supports efficient process control and reduces rework. Ergonomic handling that speeds inspection workflows A 270° rotatable display and compact dial allow the indicator to be read comfortably in confined set-ups or when mounted on standard holders. The device supports measurement reversal and includes a clear digital readout with an analogue bar graph and dedicated keys (ON/OFF/NULL, ABS, SET/TOL, HOLD), which shortens operator interaction time and lowers the chance of transcription errors. The stem with an 8 h6 fitment integrates with common mounting systems, while the overall design aims to minimise handling time during repetitive checks—improving throughput without sacrificing measurement reliability. Modern connectivity and practical power management Equipped with USB‑C data output, the gauge facilitates direct data transfer to inspection software or data loggers for traceable record keeping and reduced manual entry. The unit is powered by a rechargeable lithium battery that is charged via the supplied USB cable, removing the need for frequent cell changes and ensuring continuous availability on the floor. These connectivity and energy features streamline documentation workflows and support digital quality systems by enabling quick export of measurement values for SPC or reporting. Contact Metav Werkzeuge today to discuss how the M301.076 can be integrated into existing inspection routines and to arrange delivery from our Emmerich stock. Technical Data Article number: M301.076 GTIN: 4054469182407 Manufacturer: Metav IndustryLine Category: Dial gauges (Messuhr) Facts Measuring range: 0–15 mm Resolution: 0.001 mm Accuracy: ±0.003 mm Repeatability: 0.002 mm Dial diameter: 60 mm Weight: 0.298 kg Stem diameter / fit: 8 h6 Display rotation: 270° Special features Digital display with analogue bar graph and function keys USB‑C data output for direct transfer Rechargeable lithium battery, USB cable included Reverse measurement possible Compact, lightweight design for tight set-ups Category code: 21170308 FAQ What is the smallest increment the gauge can display? The gauge displays increments of 0.001 mm, enabling very fine resolution for precision checks. How accurate is the instrument in typical use? The device achieves an accuracy of ±0.003 mm with a repeatability of ±0.002 mm, suitable for stringent workshop quality control. Which interface is available for data capture? Data are exported via USB‑C, allowing direct connection to data loggers or inspection software for traceability. Can the display be adjusted for awkward mounting positions? Yes, the display rotates through 270°, providing clear visibility in confined or rotated mounting situations. Is the battery replaceable and how is it charged? The unit uses a rechargeable lithium battery charged via the supplied USB cable; the battery is intended for convenient recharging rather than frequent cell replacement. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
15–35mm Digital Internal Dial With 0.001mm Resolution, Round Tips, IP65, Supplied In Case - Metav IndustryLine
Combine the high 0.001 mm readout with a compact 15–35 mm measuring range and IP65 protection for reliable bore and groove checks; order via Metav Werkzeuge or consult our specialists for application advice. Digital internal indicator M209.232 — 15–35 mm range, 0.001 mm resolution (Metav IndustryLine) The Digital internal indicator M209.232 is a compact digital instrument designed for rapid internal measurements of bores, grooves and similar features in workshop or production environments. High-resolution 0.001 mm readout Measuring range 15–35 mm IP65 dust and splash protection Round measuring tips Ø3×3 Accurate internal measurement for production control The instrument delivers a 0.001 mm resolution combined with a documented industrial-level accuracy of ±0.02 mm, which supports repeatable decisions on acceptance or rework. With a defined measuring span of 15–35 mm, the gauge targets small-to-medium bores and internal features where fine detail matters; the fine resolution reduces interpolation and speeds up pass/fail assessment. The precise readout and documented accuracy enable efficient sampling in quality control routines and minimise downstream rejects by making variation immediately visible. Robust build to withstand shop-floor conditions Constructed for practical use, the device carries an IP65 rating, shielding electronics from dust and water spray during routine inspection cycles. The instrument’s balanced mass (approx. 1.2 kg) and a probe length of 50 mm ensure stable handling while the round measuring tips Ø3×3 provide secure contact in curved bores and grooves. Delivered in a protective case for safe transport and storage, the unit is suited to harsh production settings where durability and repeatability are essential for continuous measurement tasks. Practical digital functions that speed inspection workflows The digital display includes a run bar and selectable mm/inch readout plus convenient keys for zeroing, preset, tolerance comparison and signed deviation ("+/-"), which reduce interpretation time during batch checks. Preset and tolerance functions turn raw measurement into immediate decision support by indicating conformity at a glance, while the run bar aids in smooth probe motion handling. These features help lower cycle time per part and simplify integration into existing inspection procedures without additional measuring devices. Application scope and integration into inspection routines Intended for rapid verification of bores and internal recesses, the indicator fits maintenance, assembly and small-batch production tasks where compact internal measurement is required. The instrument works well as a bench tool for spot checks or as part of a portable inspection kit for in-situ measurements. Its combination of fine resolution, robust enclosure and practical display functionality supports both reactive troubleshooting and scheduled quality audits, delivering a pragmatic balance between laboratory precision and workshop usability. Contact Metav Werkzeuge in Emmerich for tailored application advice or to arrange procurement of the Metav IndustryLine M209.232 internal indicator — phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: M209.232 GTIN: 4054469181578 Manufacturer: Metav IndustryLine IP protection: IP 65 Facts Measuring range: 15–35 mm Resolution / display: 0.001 mm Accuracy: ±0.02 mm Weight: 1.2 kg Probe length: 50 mm Measuring tips: Ø3×3 Special features Digital display with run bar and mm/inch selection 0/off, Preset, Tol and "+/-" keys Suitable for quick measurement of bores and grooves Delivered in protective case for transport and storage FAQ What internal diameters can be measured with this instrument? The instrument measures internal features within the 15–35 mm range; it is therefore suitable for small-to-medium bores and internal grooves. What level of precision does the device provide? The digital internal indicator offers a 0.001 mm readout and an accuracy of ±0.02 mm, allowing fine-resolution checks during production control. Is the device protected against workshop contamination? Yes, the unit has an IP65 rating, which protects electronics from dust ingress and water spray, making it suitable for industrial environments. Which display and comparison functions are available? The digital display on the M209.232 includes a run bar, mm/inch selection and keys for zeroing, Preset, Tol and signed deviations, enabling quick pass/fail assessments. Does the product include measuring tips and a case? The delivery includes round measuring tips Ø3×3 and a protective case for transport and storage, ensuring safe handling between inspection locations. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
16 mm Depth Stop For Dial Indicator With Round Contact Face, 8 mm Shank - Metav IndustryLine
Take advantage of precise depth probing with a compact, robust accessory that ensures repeatable readings and straightforward integration into existing dial gauge setups. The round 16 mm contact face and standard 8 mm mounting shank combine for reliable contact and broad compatibility. Order the depth measuring stop directly via Metav Werkzeuge or consult our specialists for integration advice. Depth measuring stop for dial gauge M208.062.1 — round 16 mm head, 8 mm shank (Metav IndustryLine) Depth measuring stop for dial gauge M208.062.1 provides a compact probing solution for depth checks and stepped feature measurement in confined workspaces, designed as an accessory for workshop and inspection rigs Round contact face, 16 mm diameter 8 mm mounting shank for standard dial gauges Robust design for repeatable measurements Compact 45 mm height for confined spaces Precise depth probing where space is limited The accessory offers a 16 mm round contact surface that distributes contact force evenly, reducing local indentation and stabilising the probe point during measurement. Paired with an 8 mm mounting shank, the unit integrates with dial gauges that have the corresponding receiver, enabling repeatable readings across multiple checks. The short overall height and compact footprint make it particularly suitable for installations where lateral clearance is restricted, while the geometry supports secure seating on flat and lightly contoured surfaces. Seamless compatibility and simple installation Compatibility is a key advantage: the stop fits all dial gauges with an 8 mm mount, permitting rapid changeover between test fixtures without adapters. The standardised mounting diameter ensures a consistent interface with common indicator stems, so the accessory can be used as a permanent stop or a quick-fit probe for ad hoc inspections in the workshop. Its design focus on mechanical simplicity minimises sources of measurement error and shortens setup time during serial checks or occasional verification tasks. Designed for reliable workshop and inspection use Constructed for stable contact and low maintenance, the device supports frequent routine use in production and QA environments. The round contact face reduces lateral slip during engagement, improving measurement stability when probing steps or recesses. Low-maintenance operation combined with a compact form factor contributes to efficient workflows, as measurement tasks can be executed quickly without sacrificing consistency. The accessory complements dial gauge systems for operators seeking a pragmatic balance between precision and operational efficiency. For precise depth probing and practical integration, request Metav Werkzeuge’s specialist advice or order the M208.062.1 depth measuring stop directly from our Emmerich stock. Technical data Article number: M208.062.1 GTIN: 4061905042737 Description: Depth measuring stop for dial gauge, round, 16 mm head, Ø 8 mm shank Manufacturer: Metav IndustryLine Facts Weight: 0.43 kg Overall height: 45 mm Contact face diameter: 16 mm Mounting shank: Ø 8 mm Special features Round contact face Suitable for all dial gauges with 8 mm mounting Category: Measuring devices – accessory Compact design for confined spaces FAQ Is this stop compatible with all dial gauges? The depth measuring stop is compatible with dial gauges that have an 8 mm mounting shank; the M208.062.1 is designed specifically for that standard interface. What is the contact face diameter and why does it matter? The contact face is 16 mm in diameter; the larger, round surface helps distribute contact force and improves stability for depth and step measurements. Can the stop be used for stepped and recessed measurements? Yes, the round contact face and compact geometry of the M208.062.1 are suited to probing steps, recesses and confined features where a stable reference is required. How heavy is the accessory and is it suitable for fixture mounting? At 0.43 kg the unit is compact yet substantial enough for secure fixture mounting and repeatable mechanical engagement. Does the accessory require special adapters for installation? No adapters are necessary when used with dial gauges that accept an 8 mm shank; the standard interface enables direct installation. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
160-250mm Internal Precision Bore Gauge 0.01mm Resolution, 5-Point Probes, Supplied in Case - Metav IndustryLine
Take advantage of precise analogue reading, robust build and deep probing capability to streamline inside‑diameter inspection; order directly via Metav Werkzeuge or request specialist advice from the Metav team. Internal fine-measuring instrument M208.025 — analogue internal gauge, 0.01 mm resolution (Metav IndustryLine) The Internal fine-measuring instrument M208.025 is a compact analogue internal measurement stand for reliable inside‑diameter inspection in workshops and production quality control. Analogue reading with 0.01 mm resolution Measuring range 160–250 mm Repeatability ±0.005 mm Matt chrome device holder for stability High‑precision analogue measurement for reliable quality control This internal gauge combines a clear analogue indication with a fine resolution of 0.01 mm, delivering a measurable advantage for routine inspections and sample checks. The instrument’s documented repeatability of 0.005 mm ensures that repeated measurements remain consistent, which supports reproducible pass/fail decisions on the shop floor. Such technical consistency reduces rework and shortens inspection cycles, making the device a pragmatic choice for small series and batch control. Robust design and probing depth for versatile workshop use Built around a matt‑chrome device holder, the instrument provides mechanical stability during inside‑diameter probing; the assembly weight of 2.9 kg contributes to a steady measuring platform. The unit offers a measuring depth of 400 mm, allowing access to deeper bores and recessed features without auxiliary fixtures. Supplied probe extensions of 50 mm expand reach where required, while the set of gauge shims facilitates quick functional checks and setup. The overall design emphasises day‑to‑day durability and ease of handling in industrial environments. Practical integration into inspection workflows With a measuring span of 160–250 mm, the instrument sits in the standard workshop range for internal checks, supporting common bore sizes found in machining and assembly operations. The analogue dial is intuitive to read and robust against electrical interference, making it suitable for heavy‑duty surroundings where digital electronics may be less desirable. The configuration of probe pins and the included gauge shims enable rapid changeover between nominal diameters, reducing downtime and improving throughput for inspection routines. For direct procurement or technical advice on integrating the Metav IndustryLine M208.025 into production, contact Metav Werkzeuge’s Emmerich team for personalised recommendations and delivery coordination. Technical data Article number: M208.025 GTIN: 4061905042706 Type: analogue internal fine‑measuring instrument Measuring range: 160–250 mm Resolution: 0.01 mm Repeatability: 0.005 mm Measuring depth: 400 mm Weight: 2.9 kg Material: matt chrome‑plated device holder Numerical data Measuring range minimum: 160 mm Measuring range maximum: 250 mm Measuring pins: 8 Probe set configuration: 5× (160/170/180/190/200 ±1.4) Extensions: 50 mm Gauge shims: 0.5 / 1 / 2 / 3 / 6 mm Special features Analogue dial indicator for clear visual reading Robust workshop design for repeated use Suitable for inside‑diameter inspection in production FAQ What measurement range does this instrument cover? The Internal fine‑measuring instrument M208.025 covers the inside‑diameter range from 160 mm to 250 mm. How fine is the instrument’s resolution and repeatability? The device provides a resolution of 0.01 mm and a repeatability of 0.005 mm, which supports consistent shop‑floor inspection results. Is the unit suitable for deep bores? Yes; the instrument offers a measuring depth of 400 mm and includes 50 mm probe extensions to access recessed features. Which components are included for setup and checks? The instrument is supplied with a set of gauge shims (0.5, 1, 2, 3, 6 mm) and the specified probe configuration to facilitate setup and quick functional checks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Precise measurements with dial indicators for workshop and production use
Dial indicators are high-quality measuring devices designed for a variety of measuring ranges and fine-tuning tasks. These instruments, available in digital and analogue versions, enable precise assessment of concentricity, flatness and comparative measurements in confined or critical areas.
How dial indicators work and where they are essential
Analogue dial indicators transmit the linear movement of the probe via a rack-and-pinion mechanism to the pointer, with an additional revolution counter showing extended travel. Many types operate in both compression and tension, so a wide effective measuring range is covered. Lever-type indicators use a lever system instead of a rack, offering a smaller range but finer resolution. Typical workshop applications include runout checks at the lathe, setting up depth on milling tables or circular saws, and comparative checks during series production.
Tangible benefits for everyday production
- Fast, repeatable readings for comparison work, reducing setup and inspection time.
- Stable measuring force and hardened contact tips for reliable, wear-resistant contact and consistent results.
- Broad selection: digital dial indicators, mechanical dial indicators, depth gauges, lever-type test indicators, fine‑point test indicators and thickness gauges cover most shop tasks.
- Reduced risk of measurement error through appropriate instrument choice and accessories, improving first-pass yield.
- Flexible deployment on machines and inspection benches thanks to standardised mounts and probes.
Why choose Metav as your precision partner
Metav stands for the democratisation of precision, combining decades of expertise with a comprehensive inventory for industry, crafts and trade. From Emmerich, Metav operates as a practical quality filter for the European market, supplying over 48,000 satisfied customers and more than 250,000 products. For buyers who prioritise dependability and a single-source approach, Metav’s range of dial indicators and related measuring equipment provides a technically sound and convenient solution.
Core takeaway
Dial indicators deliver precise, repeatable measurements across a variety of specialised tasks; selecting the correct type—whether digital, analogue or lever-type—ensures reliable results and smoother production processes.
FAQ
What is the main difference between analogue and digital dial indicators?
Analogue dial indicators transmit movement via a rack-and-pinion and show mechanical pointer travel, which can be advantageous for visual trend detection; digital dial indicators provide direct numerical readout and often allow data output for logging and analysis, both of which are available from Metav.
When should I use a lever-type test indicator instead of a standard dial indicator?
Use a lever-type indicator when you need finer resolution over a small measuring range or when the probe must access tight spaces; lever-type instruments are particularly useful for checking runout and small surface variations.
How do I avoid damaging an analogue dial indicator’s gearing?
Avoid forcing the probe beyond its travel range; where significant overtravel is possible, choose a model with an appropriate range or a built-in stop. A drag pointer or anti-backlash feature can also reduce the risk of gear damage by preventing delayed pointer return.
Are special contact tips necessary for different materials?
Yes. For consistent results and reduced wear, choose hardened contact tips or balls appropriate to the material and surface finish being measured; Metav’s product range includes a variety of probe tips and accessories for this purpose.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com