Digital calipers for fast, reliable dimensional control
Digital calipers and precision calipers deliver fast, repeatable length measurements for metalworking, woodworking and electronics applications, reducing rework and speeding up inspection workflows. Designed with robust stainless steel bodies, high-resolution digital displays and capacitive sensors, these measuring tools provide high accuracy, easy data output and mm/inch conversion for seamless integration into quality processes. Suitable for production, workshop and lab use, they offer durable performance and intuitive operation to support consistent tolerance control.
300mm Digital Precision Caliper With mm/inch Display, ABS/INC, Depth Gauge, Locking Screw, Battery CR2032, Supplied In Case - Filetta
Compact, accurate and easy to operate: rely on 0.01 mm resolution, ±0.03 mm accuracy and an integrated depth gauge for consistent workshop results. Benefit from a robust thumb wheel and locking screw for repeatable positioning. Order the Filetta instrument directly via Metav Werkzeuge or contact our specialists for application advice. Digital caliper MS910.470 — Filetta, 0–300 mm, 0.01 mm resolution The Digital caliper MS910.470 is a workshop-grade measuring instrument designed for general machine and metalworking tasks, providing fast linear measurement up to 300 mm with both absolute and incremental modes. 0.01 mm resolution, 0.03 mm accuracy Measuring range 0–300 mm Integrated depth gauge and 60 mm jaws Thumb wheel and locking screw for control Faster, traceable quality control with reliable metrology The combination of 0.01 mm display resolution and a verified ±0.03 mm accuracy makes this digital tool suitable for routine inspection and shop‑floor quality checks where repeatability matters. The electronic readout supports mm/inch switching and ABS/INC modes, so dimensional data can be recorded in the preferred unit or used for stepwise measuring tasks. The clear digital display reduces interpretation errors compared with a purely mechanical scale, shortening inspection time and improving throughput in small-series production. Practical handling that reduces measurement variation Operation focuses on repeatable results: a fine-adjustment thumb wheel enables smooth approach to a measured surface while the locking screw secures the slide for transfer measurements. The instrument also includes a depth gauge and 60 mm jaws for common internal, external and step measurements, covering the majority of workshop needs. Classified in the Standard range (measuring span up to 300 mm), this caliper balances reach and stiffness for day-to-day tasks in metalworking and machine assembly, giving users a familiar, one‑hand workflow. Built for everyday use and integration into workflows Power is supplied by a single CR2032 battery for long service life, and the simple control cluster — on/off, unit switch and reset — keeps training time minimal. The tool’s design emphasises functionality: robust slide components and a practical jaw geometry for general-purpose measurements. As part of a pragmatic metrology approach, the instrument supports measurable process improvement on the shop floor, enabling rapid decisions during setup and first‑article inspections while fitting into an orderly quality regimen. For purchasing advice on the Filetta MS910.470 or to discuss suitability for a specific application, contact Metav Werkzeuge in Emmerich by phone +49 2822 7131930 or e‑mail info@metav-werkzeuge.com to arrange a tailored quotation and delivery details. Technical Data Article number: MS910.470 Manufacturer: Filetta Core technical data Measuring range: 0–300 mm Resolution (display): 0.01 mm Accuracy: ±0.03 mm Jaw length: 60 mm Battery: 1x CR2032 Special features Digital display with mm/inch, ABS/INC and reset Depth gauge for deeper measurements Thumb wheel for fine positioning Locking screw for repeatable measuring Digital absolute and incremental measurement FAQ What accuracy can be expected from this caliper? The Filetta digital caliper MS910.470 specifies an accuracy of ±0.03 mm, suitable for standard workshop inspection and production control. Can the instrument measure internal and external dimensions plus depths? Yes. The MS910.470 supports internal, external and depth measurements and is equipped with a depth gauge and 60 mm jaws for typical workshop tasks. What is the display resolution and unit flexibility? The display provides a 0.01 mm resolution and can be switched between millimetres and inches using the mm/inch function on the digital readout. How is fine positioning achieved during measurement? Fine positioning is assisted by the integrated thumb wheel and can be fixed with the locking screw to ensure repeatable readings with the MS910.470. Is the caliper suitable for everyday machine‑shop use? Yes. With a 0–300 mm measuring range, the instrument falls into the Standard class suited for general machine and metalwork inspections. Manufacturer / Responsible: Schut Geometrische Meettechniek bv; Duinkerkenstraat 21; 9723 BN Groningen; The Netherlands; +31 50 5877877; schutnl@schut.com
300mm Digital Precision Caliper With Preset Function, 11mm Display, IP54, USB - Microtech Metrology
Take advantage of precise shop-floor measurement with robust dust and splash protection and convenient data transfer. The combination of 0–300 mm range, 0.03 mm accuracy and USB output ensures reproducible results and fast documentation. Order the caliper directly via Metav Werkzeuge or ask the consultants for tailored advice. Precision Caliper by Microtech Metrology — 0–300 mm, USB data output, IP54 The Precision Caliper is a digital measuring instrument designed for workshop and quality‑control tasks, offering a standard measuring range up to 300 mm and reliable performance in busy production environments. Digital readout with 11 mm high digits USB data output for traceable transfers IP54 splash and dust protection PRESET function for quick zeroing Reliable measurements even in the workshop Built for repeatable results, this digital instrument combines a measuring range of 0–300 mm with an accuracy of 0.03 mm, making it suitable for everyday tasks in machining and metalworking. The caliper's classification as a standard‑range tool reflects the best compromise between reach and stiffness: typical 150/200/300 mm sizes cover the majority of workshop needs while remaining easy to handle. The IP54 rating reduces the risk of contamination from coolant mist or fine dust, so measurements stay consistent across shifts and workstations. Fast documentation and simple operation Workflows benefit from the USB data output, which enables rapid transfer of readings to a PC or measurement logging system for traceability and statistical evaluation. The 11 mm display offers high legibility, speeding up checks on the shop floor and reducing transcription errors. The built‑in PRESET function allows a quick zero reference, supporting comparative checks and fixture setups. With a standard resolution of 0.01 mm, the device provides the clarity required for routine quality‑control tasks while keeping operation straightforward for technicians. Practical design for everyday use The instrument includes a depth gauge and robust measuring jaws, supporting inside, outside, depth and step measurements typical for calipers. The digital electronics and pragmatic ergonomics make this caliper a time‑saving tool for production, assembly and incoming inspection. Supplied by Microtech Metrology, the instrument reflects a focus on dependable metrology components integrated into everyday workshop practice. Combined with Metav's quality filter and broad product range, this caliper helps bring high precision into regular use without unnecessary complexity. Contact Metav Werkzeuge today to discuss the Microtech Metrology Precision Caliper with USB output and secure the right configuration for your measurement tasks Technical data Article number: 141081312 GTIN: 4061905455711 Manufacturer: Microtech Metrology Facts Measuring range: 0–300 mm Accuracy: 0.03 mm Resolution (display): 0.01 mm Digit height: 11 mm Jaw lengths: 60/20 Special features Digital display USB data output PRESET function Depth gauge included IP54 splash and dust protection FAQ Is the instrument suitable for shop-floor use? The caliper is designed for workshop environments; the IP54 rating provides splash and dust resistance suitable for production and inspection areas. Can measurements be exported directly to a computer? Yes, the device features USB data output for direct transfer of readings to PCs and data‑collection systems. What accuracy and display resolution does the caliper offer? The caliper provides an accuracy of 0.03 mm with a display resolution of 0.01 mm and 11 mm high digits for clear reading. Does the instrument support depth and step measurements? Depth and step measurements are supported; the tool includes a depth gauge alongside standard inside and outside measuring functions. What is the product identification for ordering or reference? The product is listed as Precision Caliper (Microtech Metrology), SKU 141081312, GTIN 4061905455711. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
300mm Digitaler Messschieber mit Force Control, 0,005mm Auflösung, IP54, ISO17025 Kalibrierzertifikat - Microtech Metrology
Caliper — Digital Caliper with Measuring Force Control and Microcomputer by Microtech Metrology The Caliper with measuring force control and microcomputer enables precise, repeatable length measurements for workshop, inspection and production tasks. 0–300 mm measuring range for versatile use 0.005 mm resolution for high-precision results E-Force control 1–20 N with AUTO-Force and colour feedback Wireless and USB data transfer to PC and mobile devices IP54 protection and carbide jaws for robust shop use Precision and repeatability for critical measurements This instrument delivers reliable measurement data thanks to its 0.005 mm selectable resolution and the integrated E-Force control. The measuring force can be set manually between 1–20 N, and values are recorded only when the preset force is reached, ensuring reproducible results independent of operator pressure. The Force module offers AUTO-Force, visual colour indication and force readout so operators can maintain consistent measurement technique without second-guessing. Simplified data handling to speed up workflows Microtech Metrology’s data transfer approach is intentionally straightforward: for PC operation a single dongle receives the data, while direct transfers to iPhone, iPad and Android devices are possible from the instrument itself; this design is simpler than the U-WAVE technology by Mitutoyo. The caliper supports Wireless HID modes, Wireless to the MDS app (Windows, Android, iOS, MacOS), and USB HID with dot/comma configuration, allowing seamless integration into data capture routines and quality systems. Robust construction and traceable calibration for shop reliability Manufactured from stainless steel with hand-finished measuring surfaces (Ra<0.32 μm) and equipped with upper and lower carbide jaws, the unit resists wear in everyday use. The housing meets IP54 for splash protection. A rechargeable Li-Pol 300 mAh battery with USB‑C charging/data socket keeps downtime low. Each instrument includes a calibration certificate ISO17025 (Ilac MRA) so results can be traced into formal inspection records. Designed roles, memory and practical functions for integration With a 0–300 mm measuring range this model fits the “extended (>150–300 mm)” class while remaining suitable for standard workshop tasks. The onboard memory manager stores 1,000 values and offers statistics and folder organisation, while functions such as Go/NoGo, Max/Min, Formula, Timer, Linear and Temperature Correction, Resolution Selection and Peak provide direct in-tool data processing. These features reduce manual transcription and support faster decision making on the shop floor. Highly recommended: Select Microtech Metrology’s Digital Caliper for precise, repeatable measurement workflows — METAV Werkzeuge offers expert consultation and support. For questions or technical advice contact METAV Werkzeuge via eMail info@metav-werkzeuge.com, Phone +49 2822 7131930 or WhatsApp +49 170 2837271 Technical Information Caliper with Measuring Force Control and Microcomputer Brand: Microtech Metrology SKU: 141077030C Measuring Range: 0–300 mm Resolution / Reading: 0.005 mm (selection 0.005 / 0.01 / 0.1 mm) Measuring Force: 1–20 N, Manual selection and AUTO-Force mode, Force indication Data Output: Wireless + USB Digital Display: Colour 1.5" Touchscreen Memory: 1000 values with folders, Statistics mode, Memory data transfer Functions: Go/NoGo, Max/Min, Formula, Timer, Resolution Selection, Peak, Limits, Manual Temperature Compensation, Linear Error Compensation, Preset, Graphic, FW update E-Force control module: Force selection 1–20 N, AUTO-Force, Colour indication Measuring Surfaces: Upper and Lower carbide jaws Surface Finish: Measuring surfaces Ra < 0.32 μm Battery: Rechargeable 300 mAh Li-Pol, USB‑C charging/data socket Calibration: Calibration certificate ISO17025 (Ilac MRA) included IP Protection: IP54 Patents: US10184772, UA174949, UA126928 Manufacturer: MICROTECH Private Scientific Manufacturing Enterprise; 04080, Ukraine, Kyiv; Nizhneyurkovska str., 45a; tool@microtech.tools FAQ How does the Microtech Metrology Caliper ensure consistent measurement pressure? The Microtech Metrology Caliper features an adjustable E-Force control allowing manual selection from 1–20 N; measurements are recorded only when the set force is reached, which guarantees consistent measurement pressure and repeatable results across users. Can I transfer measurement data from the Microtech Metrology Caliper to mobile devices? Yes, the Microtech Metrology Caliper supports Wireless transfer to the MDS app on Windows, Android, iOS and MacOS and also Wireless HID modes; for PC a single dongle is used, offering a simpler workflow than the U-WAVE technology by Mitutoyo. Is the Microtech Metrology Caliper suitable for shop floor use and traceable inspection? The Caliper is built from Stainless Steel with Carbide Jaws, meets IP54, and includes an ISO17025 (Ilac MRA) calibration certificate, making it appropriate for robust shop use and traceable quality processes. What memory and evaluation functions are available on the Microtech Metrology Caliper? Onboard Memory stores up to 1000 values with folder support and statistics; available functions include Go/NoGo, Max/Min, Formula, Timer, Resolution Selection and Linear Error Compensation to support immediate evaluation without external tools.
300mm Digitaler Messschieber, 0,005mm Auflösung, IP54, Force Control 1–20N, ISO17025 kalibriert, Wireless+USB - Microtech Metrology
Caliper with Force Control and Microcomputer — Digital Caliper The Caliper with Force Control and Microcomputer is a digital caliper designed for precise workshop and production measurements up to 300 mm, combining force‑controlled measuring, reliable data transfer and a compact colour touchscreen. 5 μm reading resolution selectable E‑Force control 1–20 N for reproducible force Wireless and USB data transfer modes Stainless Steel body with fine‑finished jaws Calibration certificate ISO 17025 included Exceptional precision and measurement reliability The Caliper with Force Control and Microcomputer delivers a 5 μm reading resolution with selectable display steps (0.005 / 0.01 / 0.1 mm), making it suitable for fine mechanical work and QA tasks. Its Stainless Steel construction and hand‑finished measuring faces (Ra < 0.32 μm) ensure repeatable contact geometry and long‑term stability. A factory Calibration Certificate (ISO 17025) is supplied, supporting traceability and quality assurance in manufacturing and inspection environments. Consistent results through controlled measuring force Thanks to the integrated E‑Force control module the caliper allows manual force selection between 1 and 20 N, an AUTO‑Force mode and clear colour force indication. Measuring values are captured only when the preset force is reached, which prevents operator‑dependent variations and improves reproducibility on different materials. This feature is especially valuable on soft or coated parts where lower measuring pressure reduces deformation and maintains part integrity. Seamless connectivity for Industry 4.0 workflows Equipped with Wireless and USB HID transmission modes, the instrument sends data directly to the MDS app (Windows, Android, iOS, MacOS) or acts as a keyboard input to any application. Microtech’s approach to data transfer removes the need for multiple connectors and senders: a single dongle is sufficient for PC reception, while direct wireless output to iPhone, iPad and Android devices is possible from the tool itself. For comparison, this simplification contrasts with the U‑WAVE technology from Mitutoyo. The internal memory manages 1000 values with folders and statistics, enabling offline data collection and later transfer. Designed for everyday workshop and production use With a measuring range of 0–300 mm, the caliper spans both standard and extended workshop needs, from routine part checks to larger assembly measurements. The compact 1.5" colour touchscreen provides clear numeric readout and menu access for functions such as Go/NoGo, Max/Min, Formula input, Timer, linear and temperature correction. An IP54 rating protects against splash and dust in typical industrial environments, while the rechargeable Li‑Pol battery (300 mAh) and USB‑C socket ensure convenient charging and data connectivity on the bench. Strong recommendation: For demanding metrology tasks, choose this Microtech Metrology caliper with force control — for personalised advice and application support contact METAV Werkzeuge: 📧 info@metav-werkzeuge.com ☎️ +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Bezeichnung: Caliper with Force Control and Microcomputer Marke: Microtech Metrology SKU: 141077030A Measuring Range: 0–300 mm Resolution / Readout: 0.005 mm (5 μm) selectable to 0.01 / 0.1 mm Measuring Force: 1–20 N, manual selection, AUTO‑Force mode, force indication Data Output: Wireless + USB HID (Wireless HID+MAC option available) Display: Colour 1.5" Touchscreen Memory Manager: 1000 values with folders and statistics, memory data transfer Functions: Go/NoGo, Max/Min, Formula, Timer, Linear correction, Temperature correction, Resolution selection, Peak, Limits, Firmware update E‑Force Control: Force selection, AUTO‑Force, colour force feedback Body Material: Stainless Steel with hand finished measuring faces (Ra <0.32 μm) Battery: Rechargeable Li‑Pol battery 300 mAh, USB‑C charging/data socket IP Rating: IP54 Calibration: Calibration certificate included (ISO 17025, Ilac MRA) Patents: US10184772, UA174949, UA126928 digital: true Manufacturer: MICROTECH Private Scientific Manufacturing Enterprise; 04080, Ukraine, Kyiv; Nizhneyurkovska str., 45a; tool@microtech.tools FAQ What is the advantage of the force control on the Caliper with Force Control and Microcomputer by Microtech Metrology? The force control on the Caliper with Force Control and Microcomputer allows setting a consistent measuring pressure between 1 and 20 N so readings are taken only when the preset force is reached, reducing operator variability and protecting delicate surfaces. Can the Caliper with Force Control and Microcomputer connect to my PC and smartphone? Yes, the Caliper with Force Control and Microcomputer by Microtech Metrology supports Wireless to the MDS app (Windows, Android, iOS, MacOS) and USB HID modes so it can transmit data directly to PCs and mobile devices without complex adapters. Is the Caliper with Force Control and Microcomputer supplied with a traceable calibration? The Caliper with Force Control and Microcomputer includes an ISO 17025 calibration certificate, providing documented traceability suitable for quality systems and inspection records. How long does the battery last and how is it charged on the Caliper with Force Control and Microcomputer? The Caliper with Force Control and Microcomputer uses a rechargeable Li‑Pol battery (300 mAh) and is charged via a USB‑C socket that also supports data transfer, allowing quick and convenient recharging at the workstation. Not sure if this caliper meets your requirements or need additional technical data? METAV Werkzeuge offers comprehensive, expert advice for complex measuring tools; please contact METAV Werkzeuge for personalised support: 📧 info@metav-werkzeuge.com ☎️ +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271
300mm Digitaler Präzisionsmessschieber, 0,01mm, ISO 17025 kalibriert - Microtech Metrology
Der Präzisionsmessschieber von Microtech Metrology bietet eine kombinierte Lösung aus digitaler Ablesung 0,01 mm, gehärteten Messflächen und vollständiger ISO 17025‑Kalibrierung, was ihn besonders für qualitätskritische Werkstätten und Fertigungsprüfungen geeignet macht. Nutzen Sie die geprüfte Genauigkeit und die robuste Verarbeitung für zuverlässige Messprozesse und fragen Sie bei Bedarf die Beratung oder Lieferung über Metav Werkzeuge an. Präzisionsmessschieber – Digitaler Messschieber 0–300 mm von Microtech Metrology Der Präzisionsmessschieber ist ein digitaler Werkstatt‑Und Prüf‑Messschieber mit Messbereich 0–300 mm für Standardanwendungen im Maschinen‑ und Metallbau. Kalibrierung nach ISO 17025 inklusive Kalibrierzeugnis Digitale Anzeige mit Ablesung 0,01 mm, Displayhöhe 11 mm Messbereich 0–300 mm, Werkstatt‑Standard Gehärtete Messflächen und handgefertigte Messbacken Tiefenmaß und Feineinstellung für präzise Messführung Präzise Messwerte für den Werkstattalltag und die Produktionskontrolle Der Präzisionsmessschieber liefert mit der digitalen Anzeige eine Ablesung von 0,01 mm, womit typische Werkstatt‑ und Prüfaufgaben zuverlässig abgearbeitet werden können. Bei digitalen Messschiebern dieses Messbereichs ist eine typische Fehlergrenze von bis zu ±0,03 mm anzusetzen (nach DIN 862), was den Schieber zur geeigneten Wahl für Serienprüfungen, Einstellarbeiten und Qualitätskontrollen macht. Der direkte Nutzen für Anwender liegt in schnell verfügbaren, reproduzierbaren Messungen, die die Nacharbeit reduzieren und die Prozesssicherheit erhöhen. Robuste Verarbeitung und ergonomische Bedienung für wiederholte Messungen Gehärtete Messflächen und handgefertigte Messbacken sorgen für eine verschleißarme Kontaktfläche und lange Messgenauigkeit auch bei häufiger Nutzung. Die Feineinstellung ermöglicht kontrolliertes Annähern an das Werkstück, während das integrierte Tiefenmaß zusätzliche Messfunktionen ermöglicht. Dieser Aufbau reduziert Messfehler durch falsche Handhabung und erhöht die Lebensdauer des Werkzeugs, was für Werkstätten mit regelmäßigem Messbedarf wirtschaftliche Vorteile bringt. Kalibrierung, Nachweis und Qualitätssicherung Das Gerät wird vollständig kalibriert ausgeliefert; eine ISO 17025‑Kalibrierung mit Kalibrierzeugnis liegt bei. Damit eignet sich der Schieber für Prüfprozesse, die dokumentierte Rückverfolgbarkeit verlangen. Für Anwender bedeutet das: Messwerte können in Prüfberichten herangezogen werden, interne Qualitätskontrollen sind einfacher nachweisbar, und Reklamationszeiten verkürzen sich durch nachvollziehbare Kalibrierdaten. Einsatzbereiche und Anwendernutzen Mit einem Messbereich von 0–300 mm gehört das Messgerät zur Standardklasse für Maschinenbau, Metallbearbeitung und Werkzeugbau. Es richtet sich an Montage‑ und Prüfpersonal, Qualitätslabore und Fachbetriebe, die auf wiederholbare und dokumentierbare Ergebnisse angewiesen sind. Die Kombination aus digitaler Messung, robusten Messflächen und ISO‑Zertifikat reduziert Stillstandszeiten, minimiert Nacharbeit und erhöht die Planbarkeit von Fertigungsprozessen. Für geprüfte Präzision: Den kalibrierten Präzisionsmessschieber von Microtech Metrology (ISO 17025‑Zertifikat) direkt über Metav Werkzeuge anfragen – E‑Mail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 Produktmerkmale Artikelnummer: 141072322C Marke: Microtech Metrology Bezeichnung: Präzisionsmessschieber GTIN: 4061905200601 Daten Messbereich: 0–300 mm Ablesung: 0,01 mm Digitalanzeige Höhe: 11 mm Schnabellänge: 60/21 Besonderheiten Handgefertigte Messbacken Messflächen: gehärtet Tiefenmaß Digitale Anzeige ISO 17025 Kalibrierung (Kalibrierzeugnis beiliegend) FAQ Wie genau lässt sich mit dem Messschieber messen? Die digitale Anzeige des Präzisionsmessschiebers von Microtech Metrology ermöglicht eine Ablesung von 0,01 mm; für den Messbereich bis 300 mm ist eine übliche Messfehlergrenze von bis zu ±0,03 mm nach DIN 862 zu berücksichtigen. Die ISO 17025‑Kalibrierung des Geräts (SKU 141072322C) dokumentiert die tatsächliche Messgüte. Wird der Messschieber kalibriert geliefert? Ja, der Präzisionsmessschieber von Microtech Metrology (Artikelnummer 141072322C) wird mit vollständiger ISO 17025‑Kalibrierung und Kalibrierzeugnis ausgeliefert, sodass Messergebnisse sofort in Prüfprozessen verwendet werden können. Für welche Anwendungen ist das Gerät am besten geeignet? Der Messbereich 0–300 mm macht den Schieber ideal für Maschinen‑ und Metallbau, Werkzeugmontage und seriennahe Qualitätskontrollen. Der Präzisionsmessschieber von Microtech Metrology eignet sich besonders dort, wo reproduzierbare, dokumentierte Messergebnisse erforderlich sind. Welche zusätzlichen Messfunktionen sind verfügbar? Neben Außen‑ und Innenmessungen ermöglicht der Schieber das Messen mit integriertem Tiefenmaß sowie präzise Einstellung über die Feineinstellung, was das Handling bei wiederkehrenden Messaufgaben vereinfacht. Wie pflege ich die Messflächen am besten? Messflächen und handgefertigte Messbacken des Präzisionsmessschiebers von Microtech Metrology sollten trocken und sauber gehalten werden; leichte Schmierung mit geeignetem Korrosionsschutz und das Vermeiden von Stößen verlängern die Präzision und Lebensdauer. Hersteller: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine; tool@microtech.tools
300mm Precision Caliper Digital 0.005mm Readout 9mm Display IP67 ISO 17025 Calibrated - Microtech Metrology
Benefit from high-resolution measurement, robust IP67 protection and a full ISO 17025 calibration certificate for traceable results — order the Microtech Metrology precision caliper directly via Metav Werkzeuge or contact our consultants for detailed application advice. Precision Caliper – Digital caliper with 0–300 mm range and IP67 protection (Microtech Metrology) Precision Caliper is a workshop and quality-control instrument for dimensional inspection across standard machine‑shop applications, offering a rugged, digitally readable solution for repeatable measurements. 0–300 mm standard measuring range Resolution 0.005 mm for fine readings IP67 protection for workshop conditions ISO 17025 calibration certificate included Traceable accuracy for quality assurance The caliper delivers 0.005 mm resolution combined with an overall accuracy of ±0.03 mm, matching expectations for a standard 0–300 mm measuring class. This balance of fine resolution and predictable tolerance supports formal quality control and process documentation. The instrument is supplied with an ISO 17025 calibration certificate, which ensures traceability of results and simplifies acceptance into inspection routines. Such documented calibration reduces audit effort and integrates the gauge directly into existing measuring procedures. Built to withstand workshop environments A sealed housing rated IP67 protects the electronics against dust and temporary immersion, reducing downtime from contamination or coolant exposure. The sizeable 9 mm display improves legibility on the shop floor, while the robust construction and tactile slider deliver a durable feel during repetitive use. These characteristics make the gauge suitable for production benches where resilience and clear readout are required for fast decision-making and repeatable checks over many cycles. Precision contact and handling for reliable readings Handmade measuring jaws provide a fine contact surface and consistent seating on measured parts, which helps to reduce contact-related variation. The integrated depth gauge extends utility beyond simple outside measurements, enabling depth and step checks without additional tools. Together, these features support accurate, multi-purpose measuring tasks in a compact format that remains easy to handle and calibrate within a workshop environment. Practical advantages for machine shops and inspection Classified in the Standard (100–300 mm) category, the instrument is optimised for everyday use in metalworking and general mechanical engineering. The combination of fine resolution, protective enclosure and certified calibration makes it a practical choice for component inspection, incoming material checks and first-off verification. The instrument’s digital interface accelerates readout while limiting transcription errors, contributing to faster throughput and improved process reliability. Discuss specification and calibration options with Metav Werkzeuge: contact our Emmerich team at info@metav-werkzeuge.com or call +49 2822 7131930 to confirm suitability and delivery of the Microtech Metrology digital precision caliper (SKU 141085312) Technical Data Article number: 141085312 GTIN: 4061905038242 Brand: Microtech Metrology Product type: Digital precision caliper Measuring range: 0–300 mm Facts Resolution: 0.005 mm Accuracy: ±0.03 mm Display height: 9 mm Protection class: IP67 Calibration: ISO 17025 certificate included Special features Handmade measuring jaws Integrated depth gauge Standard class instrument for 0–300 mm measurements Robust housing suitable for workshop use FAQ Is the caliper delivered calibrated? Yes. The Microtech Metrology precision caliper (SKU 141085312) is delivered with a full ISO 17025 calibration certificate, enabling immediate use in traceable inspection tasks. What level of protection does the instrument provide against dust and liquids? The device is rated IP67, which protects the electronics from dust ingress and temporary immersion, making it suitable for typical workshop conditions. Can the caliper measure depth and steps as well as outside dimensions? Yes. The instrument includes an integrated depth gauge and is suitable for outside, inside and depth measurements in standard inspection workflows. Is the displayed resolution the same as the measurement accuracy? No. The display resolution is 0.005 mm, while the overall measurement accuracy for the 0–300 mm range is ±0.03 mm; the resolution improves readability, the accuracy defines tolerance to be expected. Who is this caliper aimed at? The caliper is aimed at machine shops, maintenance departments and quality-control labs that require a robust, digitally readable measuring instrument with certified calibration for process control. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
300mm Precision Caliper Digital 0.01mm Resolution, Force Control 8N, IP67, ISO 17025 Calibrated - Microtech Metrology
Consistent measurement force, robust ingress protection and traceable calibration combine to deliver reproducible workshop results. The device pairs an 8 N bidirectional measuring force with a clear Swiss Digital readout and an ISO 17025 calibration certificate for documented quality assurance. Order the Precision Caliper directly via Metav Werkzeuge or ask consultants if needed. Precision Caliper – Digital caliper, 0–300 mm, ISO 17025 (Microtech Metrology) Precision Caliper with bidirectional 8 N measuring force, Swiss Digital display and IP67 rating for workshop and laboratory use ISO 17025 calibration with certificate IP67 water and dust protection 0–300 mm measuring range (standard) Swiss Digital display, 11 mm height Traceable calibration for verifiable results The instrument is supplied fully calibrated to ISO 17025 and includes a calibration certificate, which documents measurement traceability and supports quality audits. This level of verification is particularly relevant for service shops and quality departments that require documented proof of conformity. With the certificate, records for incoming inspection or production control are straightforward to compile and present. Reproducible measurements through controlled contact force A bidirectional 8 N measuring force with integrated force control reduces variation caused by differing operator pressure and improves repeatability on serial checks. The controlled contact ensures that thin-walled components and delicate surfaces are measured without deformation, while still providing a consistent tactile feedback for manual operation. This results in fewer re-measures and a faster throughput in inspection routines. Designed for the shop floor: robust, readable and practical Rated IP67, the caliper resists dust ingress and temporary immersion, making it suitable for harsher workshop environments as well as clean laboratory benches. The Swiss Digital display with 11 mm high digits offers clear legibility at a glance, and the instrument’s resolution of 0.01 mm enables standard fine measurements across the full 0–300 mm span. Hardened measuring faces contribute to long service life and stable contact geometry under frequent use, so the tool maintains its performance over time. Practical handling and workplace efficiency The combination of compact ergonomics and dedicated jaw geometry (jaw lengths 60/21 mm) supports both external and internal measurements without changing tools. The instrument’s classification as a standard-range caliper makes it a versatile choice for general machine‑shop tasks: it balances reach, stiffness and single‑hand operation for rapid checks on assemblies, fixtures and components. Integration into regular quality workflows is therefore straightforward, with less downtime for measurement changeovers. For traceable workshop measurement, contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or +49 2822 7131930 to arrange supply and technical advice for the Microtech Metrology precision caliper calibrated to ISO 17025 Technical Data Article number: 141078322C GTIN: 4061905036682 Brand: Microtech Metrology Display: Swiss Digital, height 11 mm Protection rating: IP 67 Facts Measuring range: 0–300 mm Resolution: 0.01 mm Measuring force: 8 N Jaw length: 60/21 mm Special features ISO 17025 calibration with certificate Hardened measuring faces Digital caliper design IP67 protection FAQ What calibration documentation is supplied with the caliper? The caliper is delivered with an ISO 17025 calibration certificate, documenting traceability and measurement results for audit and quality records. What accuracy can be expected across the 0–300 mm range? With a display resolution of 0.01 mm and standard digital-caliper tolerances for this range, the device provides stable readings suitable for workshop quality control and inspection routines. How does the 8 N measuring force benefit repetitive checks? A consistent 8 N contact force reduces operator-induced variation and improves repeatability during serial measurements, making results more reliable across multiple operators. Is the caliper suitable for use in a production environment? Yes — the IP67 rating and hardened measuring faces make the instrument robust enough for typical shop-floor conditions while maintaining precise measurement capability. Which measurement tasks does the jaw length support? The jaw geometry (60/21 mm) is designed to handle both external and internal measurements efficiently, reducing the need to switch instruments for common inspection tasks. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
300mm Precision Caliper Digital Display 0.01mm Resolution Force-Control 8N, IP67, ISO 17025 Calibrated - Microtech Metrology
Take advantage of traceable ISO 17025 calibration, a robust IP67 protection rating and a clear Swiss Digital readout to ensure reliable, repeatable measurements in production and quality control. Order the caliper directly through Metav Werkzeuge or consult the Metav team for technical advice. Precision Caliper 0–300 mm by Microtech Metrology — Digital, IP67 The Precision Caliper from Microtech Metrology is a digitally read measuring instrument for workshop and laboratory use, combining robust ingress protection with high-resolution readout for standard industrial measurement tasks. ISO 17025 calibrated with certificate Swiss Digital display, 11 mm height IP67 protection for workshop use 0–300 mm measuring range, 0.01 mm resolution Traceable accuracy for dependable quality control The caliper delivers measurable benefits through its calibrated status: supplied with an ISO 17025 calibration certificate, the instrument ensures laboratory-grade traceability that supports internal audits and external quality checks. With a 0–300 mm measuring range and a display resolution of 0.01 mm, it suits the typical needs of machine shops and standard quality-control stations. The combination of certified calibration and fine resolution reduces uncertainty in pass/fail decisions and simplifies documentation of measurement processes. Robust design that endures workshop conditions Protected to IP67, the instrument resists dust ingress and temporary immersion, improving uptime in harsher production environments. The sealed electronics paired with a sturdy gauge construction make the caliper a practical choice where coolant splash, dust or intermittent wetting occur. The specified 8 N measuring force, applied in both directions, helps to standardise contact pressure and minimise operator-induced variation, which in turn enhances reproducibility across repeated measurements. Clear digital readout and ergonomic handling A Swiss Digital display with an 11 mm character height provides quick legibility on the shop floor, speeding up inspection cycles and reducing transcription errors. The digital interface, offering a standard 0.01 mm step, supports fast readings and straightforward transfer into inspection logs. The jaw geometry (60/21 mm) is designed to assist stable contact on small and medium components, making the instrument efficient for internal, external and step measurements common in day-to-day metrology work. Designed for the workshop — versatile applications Classified as a Standard-range caliper, this unit covers the most common measurement tasks in metalworking, fabrication and general engineering where a balance of reach and stiffness is required. Its combination of certified calibration, water and dust resistance, and a pronounced digital display positions it as a reliable tool for incoming inspection, routine quality checks and assembly control. The documented calibration and rugged protection also support traceability demands in regulated industries. For traceable accuracy from Microtech Metrology, contact Metav Werkzeuge in Emmerich for purchasing and technical guidance at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data Article number: 141078322 GTIN: 4061905036606 Brand: Microtech Metrology Display: Swiss Digital, height 11 mm Facts Measuring range: 0–300 mm Resolution: 0.01 mm Measuring force: 8 N Protection class: IP67 Special features Digital caliper, bi-directional measuring force Delivered calibrated to ISO 17025 with certificate Jaw length: 60/21 mm FAQ Is the caliper supplied with a calibration certificate? Yes. The Precision Caliper from Microtech Metrology is delivered with an ISO 17025 calibration certificate for traceable measurements. What measurement accuracy and resolution can be expected? The instrument provides a display resolution of 0.01 mm and is designed for standard workshop accuracy requirements across its 0–300 mm range. Can the caliper be used in damp or dusty environments? The caliper is rated IP67, offering protection against dust and temporary immersion, making it suitable for many workshop conditions. What does the 8 N measuring force mean in practice? An 8 N measuring force, applied in both directions, helps to standardise contact pressure and reduces variation from manual handling during measurement. Which measurement tasks is this caliper best suited for? As a Standard-range caliper, it is ideal for routine internal, external and step measurements in machine shops, assembly inspection and general quality-control workflows. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
300mm Precision Caliper Digital Display 12.5mm Height Micro-USB, ISO 17025 Calibrated, Hardened Measuring Faces, Handmade Jaws - Microtech Metrology
Benefit from traceable measurement results thanks to ISO 17025 calibration, a clear digital display and a workshop‑proven 0–300 mm measuring range; order via Metav Werkzeuge or consult the technical team for application advice. Microtech Precision Digital Caliper (0–300 mm) — Digital display, ISO 17025 calibrated The Microtech Precision Digital Caliper (0–300 mm) is a calibrated workshop instrument for precise external, internal and depth measurements in production and quality control environments. ISO 17025 calibrated, certificate included Digital display, 12.5 mm high digits Measurement range 0–300 mm, workshop standard Micro‑USB data output and thumb roller Traceable precision for routine quality control The caliper combines a 0.01 mm reading with laboratory traceability, making it suitable for inspection stations and incoming‑goods checks where documentation matters. The delivery includes an ISO 17025 calibration and a calibration certificate, which provides the documented evidence needed for internal audits and supplier quality records. With this level of verification, the instrument supports consistent decision‑making in production planning and batch release procedures. Robust measuring geometry for repeatable results Hand‑finished jaws and hardened contact faces ensure dimensional stability over time; the hand-crafted measuring jaws and hardened measuring faces reduce wear and keep repeatability high in daily workshop use. The integrated depth gauge and smooth thumb roller permit controlled, single‑hand measurements on assemblies and machined components, reducing operator variation and improving throughput in repetitive tasks. Efficient data capture and clear readout A high‑contrast digital display (12.5 mm) improves legibility under workshop lighting, while the Micro‑USB output enables straightforward transfer of measured values into SPC spreadsheets or measuring software, cutting transcription errors and speeding up documentation. The electronic interface and robust readout simplify traceable data collection in serial production and small‑batch inspection, supporting faster cycle times and better process control. Designed for everyday workshop demands Classified in the standard range for calipers, the instrument's 0–300 mm span balances reach and rigidity for general engineering tasks — from component measurement to fixture set‑up. The combination of a compact, durable slider and precise electronics delivers a practical tool for metalworking, toolrooms and quality laboratories that require reliable, documented measurements without specialist training. For traceable precision backed by ISO 17025, request the Microtech precision caliper from Metav Werkzeuge in Emmerich or consult the technical team via info@metav-werkzeuge.com / +49 2822 7131930 Technical Data Article number: 141083312C GTIN: 4061905200793 Manufacturer: Microtech Metrology Facts Measurement range: 0–300 mm Resolution / reading: 0.01 mm Digital display height: 12.5 mm Jaw length: 60/21 mm Special features ISO 17025 calibrated, certificate included Micro‑USB data output Hand‑crafted measuring jaws Hardened measuring faces Depth gauge integrated Thumb roller for controlled feed FAQ How is the caliper delivered with regard to calibration? The instrument is supplied fully calibrated to ISO 17025 standards and includes a calibration certificate for traceability. What measurement resolution can be expected from this digital caliper? This digital caliper provides a 0.01 mm reading, suitable for standard workshop metrology and quality checks. Can measurement data be exported electronically? Yes; the caliper features a Micro‑USB data output for direct transfer of values to data collection systems. Is the caliper suitable for general machine‑shop use? The 0–300 mm range places it in the standard category for everyday engineering tasks, balancing reach and stiffness for workshop inspection. Which design details improve long‑term repeatability? Hand‑crafted jaws and hardened measuring faces reduce wear and maintain contact geometry, supporting consistent measurements over extended use. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
300mm Precision Caliper Digital Display 12.5mm Micro-USB ISO 17025 Calibrated, Hand-Finished Jaws - Microtech Metrology
Take advantage of fully traceable ISO 17025 calibration, a clear digital display with 0.01 mm resolution and reliable Micro‑USB data output to streamline quality checks; order directly via Metav Werkzeuge or consult our advisers for integration and delivery. Precision Caliper — Microtech Metrology, Digital 0–300 mm, ISO 17025-calibrated A precision caliper designed for workshop and quality-control tasks, combining a large digital readout with traceable calibration and robust, hand-finished measuring faces for repeatable results. Large 12.5 mm digital display ISO 17025-calibrated with certificate included Micro‑USB data output for measurement logging Hand-finished measuring jaws and depth gauge Faster, traceable measurements for production control The large digital display (12.5 mm) with 0.01 mm resolution reduces read-off errors and speeds up inspection routines, making process control more efficient. With a clear numerical readout and a robust slider, this digital measuring instrument supports rapid sequence checks and hand‑held sampling without sacrificing clarity. The Micro‑USB interface simplifies data transfer to spreadsheets or inspection software, which cuts manual transcription and reduces risk of entry mistakes — a practical benefit for shops that log results or run traceability protocols. Accuracy assured by certified calibration and workshop suitability Delivered complete with an ISO 17025 calibration certificate, the device arrives ready for use in formal quality workflows and internal audits. The 0–300 mm measurement range places the tool firmly in the standard range (0–300 mm) category, which is optimised for everyday mechanical and metalworking tasks — a balance of reach, stiffness and one‑hand handling that fits most bench and shop requirements. Hand‑finished jaws improve contact repeatability on mating surfaces, while the integrated depth gauge extends usefulness for stepped and recess features, providing reliable single‑tool inspection for many components. Built for integration and dependable workshop service Constructed for routine use, the caliper pairs practical ergonomics with data capability so measurement becomes part of the process rather than a separate chore. The combination of hand-finished jaws and calibrated electronics yields measurement results that can be trusted for pass/fail decisions and incoming inspection. Connectivity via Micro‑USB supports digital archiving, and the compact footprint suits busy benches and inspection stations. As a component in a pragmatic quality strategy, this caliper reduces rework and supports consistent output — helping to keep production on schedule. Discuss application details or booking from Metav Werkzeuge in Emmerich for quick delivery and professional advice on integration and calibration traceability Technical Data Article number: 141083312 GTIN: 4061905037986 Manufacturer: Microtech Metrology Core data Measurement range: 0–300 mm Display resolution: 0.01 mm Display height: 12.5 mm Jaw length: 60/21 mm Special features Digital display (12.5 mm) Micro‑USB data output ISO 17025 calibration with certificate included Hand-finished measuring jaws Integrated depth gauge Digital readout FAQ Is the caliper delivered with an official calibration certificate? Yes. The precision caliper from Microtech Metrology is supplied fully calibrated to ISO 17025 and includes the calibration certificate. What is the measurement resolution and suitability for workshop QC? The instrument offers 0.01 mm resolution, suitable for standard machine‑shop quality control across the 0–300 mm range. Can measurement data be exported to inspection software? Yes. The device provides a Micro‑USB data output for straightforward transfer of readings into spreadsheets or measurement systems. Which measurements can be performed with this caliper? The caliper supports outside and inside measurements as well as depth checks, making it versatile for general inspection tasks. What is the article number for ordering or referencing? The SKU for this Microtech Metrology precision caliper is 141083312. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
300mm Precision Caliper Digital Display 14mm Height Micro‑USB Output IP54, ISO 17025 Calibrated - Microtech Metrology
Taking advantage of ISO 17025 calibration, robust IP54 protection and reliable digital data transfer, this instrument combines traceable accuracy with practical workshop integration — order directly via Metav Werkzeuge or consult our specialists for application advice. Microtech Precision Caliper 0–300 mm — digital caliper with Micro‑USB and ISO 17025 calibration The Microtech Precision Caliper is a digital measuring instrument designed for workshop inspection and quality control, offering depth measurement and Micro‑USB data output for straightforward documentation and process integration. ISO 17025 calibration included 0.01 mm resolution, ±0.03 mm accuracy Micro‑USB data output for traceable records IP54 splash and dust protection Reliable measurement for everyday workshop use Built for the Standard range (0–300 mm), this digital instrument delivers a practical balance between reach and rigidity suited to metalworking and machine construction. With a display resolution of 0.01 mm and a stated accuracy of ±0.03 mm, repeatable results are achieved for standard inspection tasks; the numerical precision reduces interpretation errors common to analogue scales, and the 14 mm display ensures readings are visible under busy shopfloor lighting. Data capture and process integration made straightforward Equipped with Micro‑USB output and a clear digital readout, the caliper supports rapid logging of measurements into inspection routines and measurement software, eliminating transcription steps and saving time. The integrated depth measurement function and dual jaw geometry (approx. 60/20 mm) extend versatility to internal, external and depth checks, enabling a compact instrument to serve multiple control points within a production sequence. Calibrated traceability that supports quality systems Delivered with an ISO 17025 calibration and accompanying calibration certificate, the instrument is ready for use in documented quality processes and audits. IP54 protection helps maintain functionality in a production environment by guarding against dust and splashes, sustaining measurement confidence between calibration intervals and supporting consistent inspection outcomes. Practical benefits for workshop workflows The digital format, compact slider and pronounced digit height combine to reduce measurement time while improving ergonomics and readability. As a digitally enabled caliper, it supports streamlined documentation and fewer interruptions to the production flow, helping to maintain throughput without compromising on accuracy or traceability. Contact Metav Werkzeuge in Emmerich for tailored advice on integrating this ISO 17025‑calibrated Microtech precision caliper into inspection routines; call +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data Article number: 141083311 GTIN: 4061905455261 Manufacturer: Microtech Metrology Facts Measuring range: 0–300 mm Resolution: 0.01 mm Accuracy: ±0.03 mm Display digit height: 14 mm Jaw lengths: 60/20 mm Protection class: IP54 Special features Digital display, Micro‑USB data output Depth measurement function included ISO 17025 calibration and calibration certificate included Suitable for workshop inspection and quality control FAQ Is the instrument supplied calibrated? Yes. The Microtech Precision Caliper is delivered with an ISO 17025 calibration and an accompanying calibration certificate. What level of accuracy can be expected with this caliper? The instrument offers a resolution of 0.01 mm and an accuracy of ±0.03 mm for the stated measuring range, suitable for standard workshop inspection tasks. Can measurement data be exported automatically? Yes. The caliper provides a Micro‑USB data output for direct transfer of readings to documentation systems. Does the caliper include a depth gauge? It does. The integrated depth measurement extends the caliper’s functionality beyond internal and external checks. Is the instrument protected for shopfloor use? The unit is rated IP54, offering resistance against dust ingress and splash water typical of production environments. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
300mm Precision Caliper Digital Swiss Display 11mm, Force Control 8N, IP67, ISO 17025 Calibrated - Microtech Metrology
Benefit from ISO 17025 traceability, wireless data transfer and IP67 protection for uninterrupted workshop measurement routines — a combination that supports consistent quality and efficient data capture. Order the precision caliper directly via Metav Werkzeuge or consult our specialists for application advice. Precision Caliper — Microtech Metrology, wireless data output and ISO 17025-calibrated The Precision Caliper is a digital measuring instrument for workshop and laboratory use, offering a 0–300 mm measuring range with an IP67 rating for robust use in demanding environments IP67 dust and water protection ISO 17025 calibration certificate supplied Wireless data output for process integration Swiss Digital 11 mm display for clear readings Dependable accuracy for everyday production control The instrument delivers a 0–300 mm measuring range classified as a standard caliper, which balances reach with rigidity for typical machine‑shop and metalworking tasks. With a display resolution of 0.01 mm, the digital readout supports routine inspection and setup work; the device complies with the expectations for digital calipers under DIN 862, where a measurement error limit of around ±0.03 mm applies up to 300 mm. The relatively high measuring force (8 N) contributes to stable contact and repeatable results across successive measurements, reducing variability when checking batches or mating parts. Faster data flow to improve process efficiency Equipped with wireless data output, the instrument removes a manual hand‑off step between measurement and documentation. Direct transfer of values into tables, SPC systems or measurement software shortens cycle time and lowers transcription errors, which is critical for production environments seeking better throughput without sacrificing control. The Swiss Digital 11 mm display provides immediate legibility at the bench, while the wireless link enables centralised logging for traceability and quality records. Built to withstand workshop conditions The caliper’s IP67 rating ensures reliable performance where coolant mist, swarf or temporary immersion might otherwise interrupt measurements. A robust slider and corrosion‑resistant finish keep guide surfaces smooth for long‑term stability, while the compact jaw geometry supports access to smaller features without compromising stiffness. These mechanical characteristics mean the instrument remains serviceable in daily use and preserves the factory calibration over extended intervals. Traceable calibration and quality assurance This measuring instrument is delivered fully calibrated to ISO 17025 and includes a calibration certificate, enabling immediate use in quality‑assured workflows and audits. The certificate documents the traceability chain and measurement uncertainty, supporting internal quality control and supplier verification. For workshop environments that require demonstrable measurement competence, the supplied calibration removes the delay and uncertainty of external verification, letting the instrument enter production control duties straight away. Contact Metav Werkzeuge to secure this Microtech Metrology precision caliper (SKU 141078392) with ISO 17025 calibration and wireless output for traceable, integrated measurement workflows Technical Data Article number: 141078392 GTIN: 4061905036699 Manufacturer: Microtech Metrology Facts Measuring range: 0–300 mm Resolution: 0.01 mm Measuring force: 8 N Display height: 11 mm Special features Digital: yes Digital display: Swiss Digital, 11 mm Data output: Wireless Protection class: IP 67 Calibration: ISO 17025 certificate included FAQ What measuring range does the caliper cover? The precision caliper covers a measuring range of 0–300 mm, suitable for standard machine‑shop and assembly measurements. Is a calibration certificate included with the instrument? Yes, the device is delivered calibrated to ISO 17025 and supplied with a calibration certificate for traceability and audit purposes. How is measurement data transferred to inspection software? Measurement values are sent via the caliper’s wireless data output, enabling direct capture into inspection systems and SPC software. What resolution and accuracy can be expected? The instrument has a display resolution of 0.01 mm; typical digital caliper error limits are in the order of ±0.03 mm up to 300 mm in line with DIN 862 guidance. Can the caliper be used in damp or dusty environments? With an IP67 rating, the caliper is protected against dust ingress and temporary immersion, making it suitable for harsh workshop conditions. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
300mm Precision Caliper Digital Swiss Display 11mm, Low Measuring Force 0.8N, IP67 - Microtech Metrology
Take advantage of the combination of IP67 protection, a Swiss Digital display and a low measuring force of 0.8 N for consistent workshop results; order the Precision Caliper directly via Metav Werkzeuge or ask our consultants if needed. Precision Caliper — Digital caliper with IP67 protection and Swiss display (Microtech Metrology) The Precision Caliper is a digital measuring instrument intended for machine shops and industrial quality control, offering a standard measuring range up to 300 mm and a robust design for everyday workshop use. Swiss digital display, 11 mm height IP67 dust and water protection Low measuring force 0.8 N for repeatable readings Measuring range 0–300 mm, workshop standard Consistent measurement performance for routine quality checks The caliper’s low measuring force (0.8 N) reduces variation caused by operator pressure, improving repeatability when measuring medium-sized components. With a readable Swiss Digital display and a clear 0.1 mm readout step, the instrument supports fast go/no-go decisions and production control tasks. Designed for the standard workshop range, the device balances reach and stiffness across 0–300 mm, making it a practical tool for general machining and inspection applications. Built to withstand the workshop environment Sealed to IP67, the instrument tolerates dust and temporary immersion, which lowers downtime in demanding shop-floor conditions. The Swiss Digital display with an 11 mm digit height increases readability under workshop lighting, so measurements can be confirmed quickly without auxiliary tools. Rugged construction and a sealed slider help preserve measuring surfaces and electronics, reducing maintenance intervals and ensuring reliable operation across long shifts. Ergonomic handling and integration into shop processes Jaw geometry and slim slider construction enable confident one-handed operation, while the modest jaw length supports access to tight features. The combination of robust protection and straightforward digital readout facilitates integration into established inspection routines and documentation workflows. For questions about suitability for specific tasks or process integration, Metav’s technical advisors provide practical guidance to match measurement strategy to production needs. Choose Microtech Metrology instruments via Metav Werkzeuge for workshop-ready precision and practical advice from our team in Emmerich; contact Metav Werkzeuge for tailored recommendations and order support Technical Data Article number: 141077353 GTIN: 4061905036811 Manufacturer: Microtech Metrology Facts Measuring range: 0–300 mm Readout / resolution: 0.1 mm Measuring force: 0.8 N Display digit height: 11 mm Jaw length: 60/21 Special features Swiss Digital display Protection class IP67 Digital operation with workshop focus SKU: 141077353 FAQ What measuring range does the caliper cover? The Precision Caliper covers a measuring range of 0–300 mm, suitable for standard workshop and machine‑shop tasks. How fine is the readout and how does that affect accuracy? The instrument provides a 0.1 mm readout step; combined with a low measuring force of 0.8 N this improves repeatability for routine inspections using the Precision Caliper. Is the caliper suitable for harsh or damp workshop conditions? Yes, the device is rated IP67, which protects against dust ingress and temporary immersion, making the caliper appropriate for demanding shop environments. What makes the display easier to read during production work? The Swiss Digital display has an 11 mm digit height for increased legibility under typical workshop lighting, helping speed up checks and reduce reading errors. Which manufacturer produces this caliper and what is the SKU? This caliper is supplied by Microtech Metrology and is listed under SKU 141077353 for ordering and inventory purposes. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
300mm Precision Caliper Double-Jaw E-Ink Display 0.005mm Resolution IP54 ISO 17025 Calibrated - Microtech Metrology
Take advantage of the combination of shop‑floor robustness, traceable calibration and easy data transfer to keep inspection processes efficient and auditable; the 0–300 mm measuring range with 0.02 mm accuracy and the included ISO 17025 calibration certificate ensure reliable results. Order the instrument directly via Metav Werkzeuge or consult our experts for application advice. Precision Caliper 141093321F — Digital E‑Ink 2.13" display, IP54 rating (Microtech Metrology) The Precision Caliper with double jaws and depth gauge, designed for standard workshop and laboratory measurement tasks across the 0–300 mm range E‑Ink 2.13″ display for low‑power legibility IP54 protection for shop floor use ISO 17025 calibration certificate included 0.02 mm accuracy, 0–300 mm measuring range Precision that supports documented quality control This digital measuring instrument delivers laboratory‑grade traceability thanks to the supplied ISO 17025 calibration certificate and an intrinsic accuracy of 0.02 mm. The measuring device is classified in the standard caliper category (0–300 mm), which balances reach and stiffness and is ideal for routine machine‑shop inspections and component checks. The certified calibration and stable measurement behaviour reduce uncertainty in acceptance decisions and provide a documented audit trail for quality systems. Reliable readings and straightforward data capture on the shop floor An E‑Ink 2.13" display ensures clear, glare‑free readings with very low power consumption, while the IP54 enclosure protects sensitive electronics against dust and splashes, making the caliper suitable for industrial environments. Measurement values can be exported via Wireless + USB, enabling fast transfer into inspection logs or SPC software and eliminating manual transcription errors. This connectivity supports efficient documentation and shortens the time from measurement to corrective action. Versatile measuring geometry that reduces rework The instrument features double jaws with a 60/40 mm jaw length split and a dedicated depth gauge, enabling consistent external, internal and step measurements within one tool. The double measuring force concept (external 8 N / internal 4 N) promotes reproducible contact conditions for different measurement orientations, which lowers operator‑induced variation. These design choices simplify measurement workflows and reduce the need for repeated checks. Traceability, brand quality and integration into inspection routines Manufactured by Microtech Metrology, this caliper is delivered ready for use with a calibration certificate and clear identification (GTIN included), supporting traceable inventory and quality records. The combination of robust protection, low‑power display technology and wired or wireless data output makes the instrument a practical choice for both bench‑top quality control and connected manufacturing environments. Integration into regular inspection routines helps maintain consistent product quality and faster decision‑making. For a traceable measuring solution from Microtech Metrology, contact Metav Werkzeuge in Emmerich to discuss procurement and application suitability — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 141093321F GTIN: 4061905457371 Brand: Microtech Metrology Digital display: E‑Ink 2.13" Facts Measuring range: 0–300 mm Accuracy: ±0.02 mm Reading: 0.005 mm Jaw lengths: 60 / 40 mm Measuring force: external 8 N / internal 4 N Protection class: IP54 Special features ISO 17025 calibration certificate included Data output: Wireless + USB Depth measurement function included Double jaws for internal and external measurement Low‑power E‑Ink display for clear legibility FAQ Is the caliper delivered calibrated? Yes. The Precision Caliper 141093321F from Microtech Metrology is supplied fully calibrated to ISO 17025 and includes the calibration certificate for traceability. What measuring range and accuracy does the instrument offer? The instrument covers 0–300 mm with an accuracy of 0.02 mm, making it suitable for standard workshop and laboratory inspections. Can measurement values be exported to inspection software? Yes. Measurement data can be transferred via Wireless + USB interfaces for direct logging into SPC systems or inspection spreadsheets. Is the device suitable for use in a production environment? The caliper’s IP54 rating and robust design make it appropriate for shop‑floor use while the E‑Ink display ensures readable values under varying light conditions. What measurement functions are available with this tool? The tool supports external and internal measurements, depth gauging and step measurements, aided by double jaws and a depth probe geometry. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
300mm Precision Caliper E-Ink Display, Wireless+USB, IP54, ISO 17025 Calibrated - Microtech Metrology
Take advantage of ISO 17025 traceability, a low‑power E‑Ink 2.13" display and dual Wireless + USB data output for rapid, reliable inspection results; order the instrument directly via Metav Werkzeuge or consult the team for application advice. Microtech Metrology Precision Caliper 141093321B — E‑Ink display, Wireless + USB The Precision Caliper from Microtech Metrology is a digital measuring instrument for workshop and quality control, designed for standard‑range dimensional checks up to 300 mm. E‑Ink 2.13" display for clear readings Delivered with ISO 17025 calibration certificate Wireless + USB data output for fast logging IP54 protection for shop‑floor resilience Reliable, traceable accuracy for production and quality control The digital instrument delivers an accuracy of 0.015 mm, supported by a full ISO 17025 calibration and accompanying certificate. This level of performance places the tool above common workshop standards, making it suitable for precise machining verification and incoming inspection. The 0–300 mm measuring range corresponds to the Standard class of calipers, which is recognised for the best balance of reach, stiffness and one‑hand operability in machine and metalworking environments. The documented calibration ensures measurement traceability and reduces uncertainty in QA processes. Fast data capture and seamless integration with inspection systems Equipped with both Wireless and USB outputs, the caliper allows immediate transfer of measurement data into SPC or QMS systems, cutting transcription errors and speeding up reporting. The E‑Ink 2.13" display provides excellent contrast and long battery life, while the IP54 rating protects sensitive electronics against dust and water splashes on the shop floor. A defined measuring force (1–20 N) specification helps achieve repeatable contact conditions, and the asymmetric 60/40 mm jaw lengths improve access to internal and external features. The integrated depth gauge expands the range of measurable geometries without extra tools. Designed for everyday workshop use with practical handling benefits Built as a standard‑range digital caliper, the device is optimised for common workshop tasks such as component checks, fixture set‑up and maintenance inspections. The robust construction and readable E‑Ink interface reduce operator strain and measurement time, while the compact jaw geometry suits confined spaces. As a calibrated instrument delivered with documentation, it fits directly into accredited inspection routines and internal audits, supporting consistent quality outcomes and straightforward audit trails. Contact Metav Werkzeuge for delivery from Emmerich, advice on integration into existing QA workflows and options for batch calibration and documentation. Technical Data Article number: 141093321B GTIN: 4061905457364 Manufacturer: Microtech Metrology Display: E‑Ink 2.13" Data output: Wireless + USB Facts Measuring range: 0–300 mm Accuracy: 0.015 mm Measuring force: 1–20 N Jaw length: 60/40 mm Protection class: IP54 Special features Digital caliper with depth gauge Delivered calibrated to ISO 17025 with certificate Low‑power E‑Ink display for long service life Wireless and USB interfaces for data logging FAQ Is the instrument supplied calibrated? Yes. The Microtech Metrology precision caliper (SKU 141093321B) is delivered fully calibrated to ISO 17025 and includes the calibration certificate. Which measurement range does this caliper cover? The device covers 0–300 mm, placing it in the Standard category suitable for general machine‑shop and metalworking tasks. How are measurement results exported? Measurement data can be exported via the built‑in Wireless connection or through the USB interface for direct capture into inspection software. Is the caliper suitable for use on the shop floor? Yes. With IP54 protection and an E‑Ink display designed for readability, the caliper is built to withstand typical workshop conditions. Does the instrument include a depth gauge? Yes. The caliper includes an integrated depth gauge for measuring recesses and step depths. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
300mm Precision Caliper E‑Ink 2.13" Wireless USB, ISO 17025 Calibrated - Microtech Metrology
High-precision measurement, ISO 17025 traceability and convenient Wireless+USB data transfer combine to deliver fast, reliable inspection results for everyday workshop use; order the instrument directly via Metav Werkzeuge or ask our consultants for tailored advice. Microtech Metrology Precision Caliper 0–300 mm with E‑Ink 2.13" display and Wireless+USB A Microtech Metrology Precision Caliper designed for standard workshop and quality‑control applications, offering ISO 17025 calibration and straightforward digital data capture ISO 17025 calibrated with certificate E‑Ink 2.13" display for clear readings Wireless and USB data output 0.01 mm resolution, 0.02 mm accuracy Traceable accuracy for reliable quality control This digital precision caliper is supplied with full ISO 17025 calibration and a traceable certificate, making it a dependable choice for routine inspection where documented accuracy matters. Classified in the Standard range (measuring span 0–300 mm), the instrument balances reach and rigidity to suit general machining and metalworking tasks. With a repeatable 0.02 mm accuracy and a display resolution of 0.01 mm, the device delivers measurable improvements in process consistency compared with non‑calibrated tools, supporting clear acceptance criteria in production control. Seamless data capture to speed workflows Equipped with Wireless and USB data outputs and a low‑power E‑Ink 2.13" display, the caliper simplifies digital documentation and reduces transcription errors. Wireless transmission and direct USB export enable rapid integration with inspection software or a shop‑floor data logger, which supports statistical process control and traceability without additional manual steps. The low‑contrast, high‑legibility display remains readable under variable lighting and conserves battery life, so transfer tasks proceed efficiently and measurement logs stay consistent. Robust handling and practical measurement features Built for everyday use in workshops, the instrument includes hardened measuring faces and a dedicated depth measurement probe for added versatility. These hardened faces resist wear over repetitive use, preserving measuring integrity, while the depth gauge opens applications to grooves, bores and step checks. The digital readout and stable slider mechanics reduce operator influence on readings, improving throughput in QA routines and workshop set‑ups. The instrument’s straightforward controls support rapid familiarisation for technicians and inspectors. Contact Metav Werkzeuge today for expert guidance or to acquire the Microtech Metrology precision caliper with ISO 17025 calibration and reliable Wireless+USB data transfer Technical Data Article number: 141093030C GTIN: 4061905100208 Manufacturer: Microtech Metrology Facts Measuring range: 0–300 mm Resolution: 0.01 mm Accuracy: ±0.02 mm Display: E‑Ink 2.13" Special features Wireless and USB data output Depth measurement probe Hardened measuring faces Delivered calibrated to ISO 17025 with certificate FAQ Is the caliper delivered with a calibration certificate? Yes. The Microtech Metrology precision caliper is supplied fully calibrated to ISO 17025 and includes the associated certificate for traceable documentation. What measuring range and accuracy can be expected? The instrument covers 0–300 mm and provides resolution of 0.01 mm with an accuracy of ±0.02 mm, making it suitable for standard workshop and QA tasks. How can measurement data be exported? Measurement values can be transferred via the caliper’s wireless interface or through USB, enabling direct capture into inspection systems or data loggers without manual entry. Does the caliper include depth and step measurement capability? Yes. A dedicated depth gauge is integrated and the geometry supports internal, external and step measurements for versatile shop usage. Are the measuring faces wear‑resistant for frequent use? The caliper features hardened measuring faces designed to resist wear under regular workshop conditions, helping to maintain measurement reliability. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
300mm Precision Caliper E‑Ink 2.13" Wireless USB, ISO 17025 Calibrated - Microtech Metrology
Taking advantage of the ISO 17025 calibration, 0.01 mm resolution and wireless data transfer ensures consistently reproducible results and smooth integration into digital workflows; order the precision caliper directly via Metav Werkzeuge or ask our consultants if needed Precision caliper by Microtech Metrology — digital E‑Ink readout, Wireless + USB data transfer The Precision caliper is a digital workshop instrument designed for standard workshop and machine‑shop tasks, offering a clear E‑Ink display and both wireless and USB data output for seamless measurement capture Digital E‑Ink display 2.13" Wireless + USB data transfer 0.01 mm resolution, ±0.02 mm accuracy Delivered calibrated to ISO 17025 with certificate Consistent, workshop‑grade accuracy for everyday tasks The instrument delivers ±0.02 mm measurement accuracy with a 0.01 mm display resolution, a combination that meets the expectations of modern production control and metrology routines. Classified as Standard range (0–300 mm), this size balances reach and rigidity for common workshop components, such as mounting faces, shafts and housings. The measured precision reduces rework and supports reliable pass/fail decisions during incoming inspection and shop‑floor quality checks. Designed for integration into measurement protocols, the caliper’s technical specification provides a verifiable basis for traceable measurements. Clear readings and practical data handling for efficient workflows An E‑Ink display 2.13" ensures high contrast and stable legibility in varied lighting conditions, while the Wireless + USB data interface removes manual transcription errors by enabling digital capture of readings. The instrument stores metrology values in a consistent numerical format, suitable for direct import into spreadsheets or quality management systems. This reduces administrative overhead and accelerates data flow from the bench to the production control system, supporting faster decision cycles and fewer interruptions to machining or assembly operations. Calibrated to laboratory standard and ready for official use Delivered with a full ISO 17025 calibration certificate, the caliper arrives ready for formal inspection tasks and compliance checks. The certificate documents traceability and measurement uncertainty, giving purchasing and quality managers a documented assurance of performance. A built‑in depth gauge extends the tool’s utility beyond simple inside and outside measurements to include step and depth measurements, reducing the need for additional gauges. Together, calibration and multi‑function capability support consistent results in both routine checks and audit situations. Designed for robust daily use and integration Construction and electronics are optimised for the shop environment: the digital readout and data interfaces are arranged for simple one‑hand operation and repeated handling. The device’s Standard range format offers the best compromise between reach and stiffness for single‑operator workflows, while the digital output format minimises data handling errors. By combining proven measurement characteristics with practical data transfer, the instrument supports lean inspection processes and continuous data collection across production shifts. Contact Metav Werkzeuge for ordering and technical advice on integrating the Microtech Metrology precision caliper into existing quality routines, or request a consultation to discuss calibration documentation and data‑capture options Technical Data Article number: 141093030B GTIN: 4061905100192 Brand: Microtech Metrology Facts Measurement range: 0–300 mm Resolution: 0.01 mm Specified accuracy: ±0.02 mm Display: E‑Ink 2.13" Data output: Wireless + USB Special features Delivered with ISO 17025 calibration certificate Depth gauge included for step and depth measurements Digital caliper format suitable for workshop and QC use Digital display type and wireless interface for data capture FAQ What measurement range does the caliper cover? The instrument covers a 0–300 mm range, classifying it as a Standard caliper suitable for typical machine‑shop and workshop tasks. Is the caliper supplied calibrated and traceable? Yes, the caliper is supplied fully calibrated to ISO 17025 and includes the calibration certificate with the delivery. How are readings transferred to a PC or quality system? Readings can be transmitted via Wireless + USB, enabling direct data capture from the digital display to inspection software or spreadsheets. Does the device support depth and step measurements? Yes, the caliper includes a depth gauge function for depth and step measurements in addition to inside and outside dimensions. Which brand and model is this instrument? This is a Precision caliper by Microtech Metrology, article number 141093030B Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
300mm Precision Caliper Force Control 8N Bidirectional, Swiss Digital 11mm Display, IP67, ISO 17025 Calibration - Microtech Metrology
Benefiting from ISO 17025 calibration, robust IP67 protection and wireless data transfer, this caliper delivers traceable, workshop-ready measurement for production and quality control. Combine 0–300 mm range, hardened measuring faces and a clear Swiss display for efficient inspection workflows; order directly via Metav Werkzeuge or request specialist advice from their consultants. Precision Caliper — digital caliper, ISO 17025-calibrated and IP67 (Microtech Metrology) A Precision Caliper built for standard workshop and laboratory tasks, offering a 0–300 mm measuring range, 8 N bidirectional measuring force and wireless data output for streamlined measurement logging ISO 17025 calibrated traceable accuracy IP67 protection for wet or dusty environments Wireless data output for remote logging Swiss 11 mm digital display, 0.01 mm resolution Traceable results that integrate with quality systems Delivered with an ISO 17025 calibration certificate, the instrument guarantees traceability for audit-sensitive environments and quality assurance processes. The factory calibration is documented and supplied with the caliper, which means readings can be relied on during acceptance tests and internal audits. Certification under this standard is important where documented measurement uncertainty is required, and the included certificate facilitates immediate use in quality control chains without additional calibration delays. Robust engineering for everyday workshop reliability Engineered for practical use, the device features IP67 protection and hardened measuring faces, which reduce wear and safeguard accuracy in harsher production settings. The construction balances stiffness and handling comfort for the standard 0–300 mm class, a size that offers the best compromise between reach and rigidity for general mechanical and metalworking tasks. This combination reduces the need for frequent rework and keeps inspection processes smooth across shifts. Precise electronics and seamless data capture With a 0.01 mm display resolution shown on a Swiss 11 mm digital display and a consistent 8 N measuring force applied in both directions, the instrument supports repeatable measurements and low operator influence. The wireless data output simplifies integration with data loggers and inspection software, removing transcription errors and speeding up documentation. For production lines and labs that collect measurement data digitally, this connectivity shortens cycle times and improves traceability. Practical benefits for workshop and laboratory workflows The caliper serves as a reliable primary measuring tool for machining, assembly inspection and incoming goods checks, where reproducible results and rapid logging are priorities. Its balanced feature set—robust protection, certified calibration and straightforward digital output—makes it suitable as a calibrated reference in small to medium-sized quality systems. Metav’s stock handling in Emmerich ensures consistent supply and a quality filter for the European market, supporting uninterrupted measurement operations. For traceable, workshop-ready measurement backed by Microtech Metrology’s ISO 17025 calibration, contact Metav Werkzeuge in Emmerich for procurement and technical consultation via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 141078392C GTIN: 4061905036705 Manufacturer: Microtech Metrology Facts Measuring range: 0–300 mm Resolution: 0.01 mm Display height: 11 mm Measuring force: 8 N Protection class: IP67 Calibration: ISO 17025 Special features Swiss digital display Wireless data output Hardened measuring faces Bidirectional measuring force 8 N Digital readout, wireless data interface FAQ Is a calibration certificate included with the caliper? Yes. The Precision Caliper is supplied fully calibrated with an ISO 17025 calibration certificate, making it suitable for immediate use in traceable quality processes. What accuracy and resolution can be expected from this instrument? The caliper provides a display resolution of 0.01 mm and is calibrated to produce reproducible measurements consistent with its specification for standard inspection tasks. Can the device be used in humid or dusty production areas? The instrument’s IP67 rating ensures protection against dust ingress and temporary immersion, so it is well suited to harsher workshop environments. How is measurement consistency achieved between operators? A defined measuring force of 8 N applied in both directions, together with hardened measuring faces, reduces operator-induced variation and improves repeatability. Which interfaces are available for data collection? This model is equipped with a wireless data output for integration with data loggers and inspection software, enabling direct transfer of measured values into digital records. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
300mm Precision Caliper Low Measurement Force, Swiss Digital Display 11mm, IP67 Wireless - Microtech Metrology
Benefit from robust wireless data transfer and IP67 protection together with a clear Swiss digital display for reliable shop‑floor measurement and fast documentation; order the Precision Caliper directly via Metav Werkzeuge or request consultation from our technical advisers. Precision Caliper — digital caliper with wireless data and IP67 protection by Microtech Metrology Precision Caliper provides rapid, traceable measurements across the standard workshop range and is designed for industrial quality control and day‑to‑day metrology tasks Wireless data output for direct transfer IP67 protection for harsh environments Swiss 11 mm digital display for easy reading Measuring range 0–300 mm for standard tasks Reliable data transfer for traceable records The caliper's wireless data output simplifies logging and reduces transcription errors in quality documentation, enabling direct transfer to data collection systems. With a Swiss digital display (height 11 mm) the readout remains legible even under workshop lighting, which speeds up inspection cycles and reduces handling time. This combination supports a more efficient quality workflow by linking measurement results to production records without manual re‑entry. Robust construction tuned for workshop use Built to withstand regular use, the instrument carries an IP67 rating for dust and water resistance, so it remains operational during routine cleaning or in humid environments. The robust jaw geometry (jaw lengths 60/21 mm) and a calibrated measuring force of 0.8 N reduce variation from operator handling, improving repeatability across shifts. Classified in the Standard (100–300 mm) category, it balances reach and stiffness for general machining and assembly tasks where a reliable, easy‑to‑handle tool is required. Accuracy and readability designed for quality control The digital caliper offers a clear reading increment of 0.1 mm, displayed on a Swiss module that prioritises contrast and digit height for quick verification. Its digital electronics remove the ambiguity of analogue scales, supporting faster decision‑making on the production line. For procurement and inspection planning, the instrument represents a pragmatic choice when traceability, ease of documentation and ruggedness are weighted equally. Contact Metav Werkzeuge to arrange a technical discussion about the Microtech Metrology Precision Caliper with wireless output and IP67 protection, or to confirm suitability for specific inspection tasks. Technical data Article number: 141077393 GTIN: 4061905036828 Manufacturer: Microtech Metrology eClass: 21170344 Facts Measuring range: 0–300 mm Reading increment: 0.1 mm Measuring force: 0.8 N Display height: 11 mm Jaw length: 60/21 mm Protection class: IP 67 Special features Wireless data output Digital caliper Swiss digital display Digital: true FAQ What measuring range does the instrument cover? The instrument covers a measuring range of 0–300 mm, placing it in the standard category for workshop and machine‑shop inspections. How is measurement data transferred from the caliper? Measurement data is transmitted via the caliper's wireless data output for direct capture in inspection software and documentation systems. Is the display easy to read on the shop floor? Yes; the caliper uses a Swiss digital display with 11 mm character height to ensure clear legibility under typical workshop lighting. Does the caliper offer protection for use in harsher environments? The caliper is rated IP67, providing protection against dust ingress and temporary immersion, suitable for environments that require regular cleaning. Who manufactures this caliper and how is it identified? The caliper is manufactured by Microtech Metrology and is listed under article number 141077393. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
300mm Precision Digital Caliper 0.01mm Resolution, 9mm Display, IP67, ISO 17025 Calibrated - Microtech Metrology
Take advantage of a tough, shop-floor ready digital caliper that combines a 0–300 mm measuring range, 0.01 mm resolution and IP67 protection with full traceability via an ISO 17025 calibration certificate; order directly through Metav Werkzeuge or consult our advisors for tailored delivery and documentation. Precision Caliper — Digital, IP67 protected, ISO 17025 calibrated (Microtech Metrology) The Precision Caliper is a digital measuring instrument for workshop and quality-control applications, offering a 0–300 mm measuring range, a clear 9 mm digit display and full ISO 17025 calibration for traceable results Digital display with 9 mm digits Resolution 0.01 mm, high readout clarity IP67 dust and water protection Delivered fully ISO 17025 calibrated Precision and traceability for quality assurance This digital measuring instrument covers the standard workshop range of 0–300 mm, delivering a fine 0.01 mm display step and a stated accuracy of ±0.03 mm, which aligns with established workshop tolerances for calibrated instruments. Supplied fully calibrated to ISO 17025, the unit arrives with a calibration certificate, ensuring measurement results are traceable and suitable for internal quality control or supplier declarations. The documented calibration removes uncertainty in audits and supports reproducible inspection routines. Built for the workshop: robust protection and reliable operation With an IP67 rating, the device is sealed against dust ingress and temporary immersion, so electronics remain protected in harsher production environments. The sealed construction reduces the risk of downtime from coolant or particulate contamination, while the integrated depth gauge extends functionality to depth measurements without additional tools. This combination of protection and multi‑function capability optimises plant-floor uptime and simplifies inspection workflows. Clear readout and ergonomic handling to speed inspection A high-contrast digital display with 9 mm digits provides excellent legibility at typical bench distances, reducing reading errors and speeding up routine checks. The caliper’s control layout and measurement functions have been designed for efficient operation by shop-floor personnel and quality inspectors, so measurement cycles are faster and less error-prone than manual vernier reading. The instrument’s straightforward interface supports consistent results across multiple operators. Traceable supply and service from a dedicated partner Distributed through Metav Werkzeuge, the caliper benefits from a supplier focused on making precision accessible for industry and craft alike. Metav’s European presence ensures reliable dispatch from Emmerich and a documented quality filter for incoming goods. Backed by thousands of satisfied customers and an extensive product range, Metav supports integration of calibrated measuring tools into standardised workflows and production documentation. Contact Metav Werkzeuge in Emmerich for expert advice on integrating this ISO 17025 calibrated digital caliper into inspection routines and for information on delivery and documentation options Technical Data Article number: 141085302 GTIN: 4061905451492 Brand: Microtech Metrology Digital display: yes Digit height: 9 mm Facts Measuring range: 0–300 mm Resolution: 0.01 mm Display accuracy: ±0.03 mm Protection rating: IP67 Special features Depth gauge included Delivered calibrated to ISO 17025 with certificate Classification: Standard (100–300 mm range) eClass: 21170344 FAQ Is this caliper suitable for general workshop quality control? Yes. The Precision Caliper with a 0–300 mm range, 0.01 mm resolution and ±0.03 mm accuracy is designed for standard machine‑shop and metalworking inspection tasks and aligns with typical workshop quality-control requirements. What does the supplied ISO 17025 calibration include? The delivery includes a full calibration performed to ISO 17025 standards and a calibration certificate, documenting traceability and measurement performance for audit and quality records. Can the instrument be used at the machine or in coolant-prone areas? The IP67 protection rating indicates the caliper is sealed against dust and temporary immersion, making it suitable for controlled use near machines and in areas where occasional splash or coolant exposure may occur. Does the caliper measure depths as well as internal and external dimensions? Yes. The caliper features an integrated depth gauge for depth measurements in addition to standard internal and external dimensions. Which brand and article number should be quoted when ordering or requesting documentation? Please quote Microtech Metrology and Article number 141085302 when enquiring about specifications, calibration records or ordering. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
30mm Precision Gauge Block Set With 41.3mm And 131.4mm Blocks, 4mm & 25mm Setting Rings, DIN EN ISO 3650/1 Wooden Case - Metav IndustryLine
Take advantage of Grade 1 accuracy, factory calibration certificates and a hardened special steel construction for reliable caliper verification; order directly via Metav Werkzeuge or consult the team's experts for application advice. Kalibriersatz für Messschieber, 5-tlg. – Parallel end-gauge set (Grade 1) »Metav IndustryLine« Kalibriersatz für Messschieber provides a compact verification solution for workshop and inspection use as a parallel gauge set for calipers and similar measuring tools. Grade 1 accuracy to DIN EN ISO 3650 Includes factory calibration certificates Hardened special steel construction Supplied in a wooden transport case Ensure measurement certainty with Grade 1 verification The parallel end-gauge set is designed to give a clear, certifiable reference for caliper checks and adjustments. Built to Grade 1 and tested according to DIN EN ISO 3650/1, the set provides a documented basis for verifying measuring jaws and overall caliper linearity. The included calibration certificates allow traceability in the inspection chain and support quality documentation. As a consequence, calibration intervals can be planned with confidence and measuring uncertainty reduced during routine checks. Practical content for workshop verification and setting tasks This kit contains precise parallel gauges in the most useful sizes for caliper inspection: 30 mm, 41.3 mm and 131.4 mm, plus two setting rings (4 mm and 25 mm) for quick function checks and zero-verification. The combination of these elements covers common reference points used in metalworking and maintenance workflows, enabling both inner and outer jaw cross-checks as well as step measurements. The compact design of the set keeps handling efficient while maintaining the stiffness required for repeatable readings. Durable construction and ready-to-use calibration documentation Manufactured from special steel, which is aged and hardened, the components resist wear over repeated use and preserve surface flatness—an important factor for repeatable contact between gauge faces and caliper jaws. Each end gauge and setting ring is supplied with a factory calibration certificate (AQRAT) that confirms conformity with VDI/VDE/DGQ 2618 inspection procedures. The set is supplied in a wooden case for secure transport and protected storage, making it suitable for both the workshop bench and the inspection room. Contact Metav Werkzeuge to arrange delivery of this Grade 1 calibration set or to discuss which verification solution best fits the measurement routine in the workshop Technical data Article number: MK.318.204.N Label: 5-teiligen Kalibriersatz für Messschieber inkl. Werkskalibierschein (AQRAT) Category: End gauges Weight: 1 kg Pieces per set: 5 Tariff number: 90173000 Quality: Grade 1 Parallel end-gauge set for calipers up to 200 mm Contents: end gauges 30 mm, 41.3 mm, 131.4 mm Includes setting rings 4 mm and 25 mm Material: special steel, aged and hardened Standards: DIN EN ISO 3650 and VDI/VDE/DGQ 2618 All items supplied with factory calibration certificates Supplied in a wooden transport case FAQ What is included in the calibration set? The calibration set includes three parallel end gauges (30 mm, 41.3 mm, 131.4 mm) and two setting rings (4 mm and 25 mm), all delivered with factory calibration certificates. Is the set suitable for routine caliper checks in a machine shop? Yes, the parallel gauge set is designed for verification of calipers up to 200 mm and covers the common reference lengths used in general machine‑shop and metalworking checks. Are the gauges supplied with calibration documentation? All end gauges and setting rings in this kit are supplied with factory calibration certificates (AQRAT) confirming conformity to the stated standards. Which standards govern the set's accuracy? Accuracy and production follow DIN EN ISO 3650/1 and the inspection procedure VDI/VDE/DGQ 2618, ensuring Grade 1 conformity. What material are the gauges made from and why does that matter? The gauges are made from special steel, aged and hardened to resist wear and to retain flatness for repeatable contact with caliper jaws. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
40mm Groove Measuring Insert Flat Measuring Face 8×4×0.5mm For Digital Uni Caliper Series 240.201–240.204 - Metav IndustryLine
Take advantage of a slim, purpose-made measuring insert that combines a flat measuring face with corrosion‑resistant construction and direct compatibility with the Digital‑Uni caliper series 240.201–240.204; order supply or request advice through Metav Werkzeuge for fast technical support. M240.261 — Measuring insert for groove measurement, flat measuring face, 40 mm (Metav IndustryLine) The M240.261 is a 40 mm stainless steel measuring insert designed for precise groove measurement on Digital‑Uni calipers series 240.201–240.204, offering a flat contact surface and slim profile for narrow access. Flat measuring face for parallel contact Slim profile for confined grooves Stainless steel, corrosion‑resistant Accurate groove measurements where space is limited The slim measuring tip and flat measuring face provide a reliable contact geometry for narrow grooves and shoulder features, reducing measurement scatter and supporting repeatable readings. With a contact area of 8×4×0.5 mm, the insert stabilises the probe-to-workpiece interface and helps produce consistent results when checking slot widths or internal recesses. This focused design is particularly useful in routine workshop inspections and small-series quality control, where efficient, verifiable measurements increase throughput without compromising traceability. Robust material and low maintenance for daily use Constructed from stainless steel, the insert resists corrosion and wear in typical shop environments, which reduces downtime for replacement and maintenance. The solid build and compact 40 mm length deliver a stable feel during handling while remaining light at 0.1 kg, easing repetitive use. These attributes translate into lower total cost of ownership through fewer tool changes and reliable long‑term service life in metalworking and assembly contexts. Seamless integration with Digital‑Uni calipers to speed workflows Engineered for direct fitment to the Digital‑Uni caliper series 240.201–240.204, the insert simplifies tool swaps and reduces setup time on the shop floor. Compatibility with the caliper family ensures measured values remain traceable within existing metrology equipment chains and allows teams to maintain a consistent measuring strategy across different stations. The short installation time and standardised interface support lean inspection processes and quicker decision cycles. Practical handling and application benefits At 40 mm overall length and with a narrow contact geometry, the insert reaches into grooves, steps and recesses that standard jaws cannot access, facilitating internal measurements without complex fixtures. The modest dimensions and corrosion‑resistant surface make cleaning and visual inspection straightforward, aiding calibration routines and keeping inspection intervals efficient. Marked repeatability and the clear contact specification help technicians interpret results with confidence and document quality checks for audits. Choose the Metav IndustryLine M240.261 for dependable groove measurements and contact Metav Werkzeuge in Emmerich for technical advice or to arrange supply at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M240.261 SKU: M240.261 GTIN: 4061905053863 Manufacturer: Metav IndustryLine Facts Measuring face: 8 x 4 x 0.5 mm Length: 40 mm Weight: 0.1 kg Special features Flat measuring face For groove measurement and internal recesses Compatible with Digital‑Uni calipers series 240.201–240.204 Corrosion‑resistant stainless steel construction FAQ How does the insert fit the caliper? The M240.261 is designed for direct compatibility with Digital‑Uni calipers (series 240.201–240.204) and connects via the caliper’s accessory interface for straightforward installation. What are the contact area dimensions? The measuring face measures 8 x 4 x 0.5 mm, providing a defined, flat contact for groove checks with the M240.261 insert. Is the insert suitable for use in humid or oily environments? Yes — the stainless steel construction of the insert offers corrosion‑resistant properties that make it suitable for typical workshop and production environments. Can this insert access very narrow slots? The slim profile and 40 mm length enable access into confined grooves and recesses where standard jaws are unsuitable, supporting internal groove and step measurement tasks. Is the insert repeatable for quality control tasks? The flat contact geometry and defined measuring face support repeatable readings, making the insert appropriate for routine inspection and traceable quality checks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
42mm Precision Caliper Outside Measuring Insert 7x4mm Ball Tip, 70mm Length - Metav IndustryLine
Take advantage of the combination of a ball-ended measuring face, a defined Ø4 mm contact and 70 mm reach to achieve reproducible external measurements; the stainless steel construction adds corrosion resistance for reliable workshop use. Order the part directly via Metav Werkzeuge or ask our consultants for compatibility details. M240.232 External measuring jaw insert — ball-ended Ø4 mm, 70 mm reach (Metav IndustryLine) The M240.232 external measuring jaw insert is an accessory for extending the external measuring capability of Digital Uni calipers, providing a ball-shaped contact for precise measurements from 42 mm and above on the associated caliper series. Ball-ended contact for defined contact point Ø4 mm contact diameter for small features 70 mm reach for extended measuring access Stainless steel for corrosion resistance Defined contact for reproducible external measurements The ball-shaped contact provides a defined contact that reduces variability when measuring edges or slightly curved surfaces. With a Ø4 mm contact diameter and a clear single-point interface, the insert gives repeatability that is superior to blunt or uneven contacts; this helps to reduce measurement scatter during routine quality checks and supports faster decision-making on shop-floor tolerances. The measured contact geometry also minimises indentation on softer finishes, preserving part integrity. Robust design that extends caliper functionality without compromise Made from stainless steel, the insert resists corrosion and stands up to regular workshop handling. The 70 mm reach of the measuring face adds measurable access without compromising stiffness, making the component suitable when the standard jaws cannot reach recessed features. Compatibility with the Digital Uni Calipers series 240.201–240.205 allows a straightforward retrofit: the part extends existing instruments with a reliable, metal contact that keeps calibration intervals predictable and maintenance simple. Practical benefits for production and inspection workflows Fitting the insert increases the versatility of a single caliper, reducing the need for multiple specialised gauges and supporting leaner toolsets in inspection stations. The defined ball contact improves measurement confidence on edges, grooves and rounded profiles, which is particularly useful in small-batch production or repair work where repeatable checks are essential. For queries about fitment or to ensure the right configuration for a particular application, Metav’s technical team is available to advise on integration and best practice handling. Contact Metav Werkzeuge for bespoke advice on integrating the M240.232 into existing calipers and to confirm compatibility with specific measuring tasks; consultants in Emmerich will assist with technical details and dispatch options. Technical data Article number: M240.232 GTIN: 4061905053771 Material: stainless steel Weight: 0.08 kg Compatible with: Digital Uni Calipers series 240.201–240.205 Contact diameter: 4 mm Measuring face length: 70 mm Facts Contact diameter: 4 mm Measuring face length: 70 mm Weight: 0.08 kg SKU: M240.232 Special features Ball-shaped measuring face For external measurements from 42 mm Stainless steel construction Designed for retrofit to caliper series 240.201–240.205 FAQ How does the ball-ended face affect measurement results? The ball-ended face on the M240.232 creates a single, defined contact point that improves repeatability and reduces surface indentation compared with flat contacts, making it suitable for edges and slightly curved profiles. Which calipers are compatible with this insert? This insert is designed for the Digital Uni Calipers series 240.201–240.205 and is supplied as SKU M240.232 for direct identification during ordering. What material is used for the measuring face and how durable is it? The M240.232 is manufactured from stainless steel, offering corrosion resistance and mechanical robustness for routine workshop use. From which internal dimension can this insert be used for external measurement? The measuring jaw is intended for external measurements starting at an internal reference of 42 mm on the corresponding caliper configuration. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
44mm Interior Measuring Insert Flat 10 x 1.5mm Faces L80 For Digital Uni Caliper Series 240.201-240.205 - Metav IndustryLine
Taking advantage of a flat measuring face (10 x 1.5 mm) and a compact stainless steel body, this internal measuring insert delivers precise groove and recess checks from 44 mm internal diameter; order the M240.215 insert directly via Metav Werkzeuge or consult our technical team for application guidance. M240.215 internal measuring insert for Digital‑Uni calipers — flat measuring face 10 x 1.5 mm M240.215 is an internal measuring insert designed for precise groove and recess measurement, compatible with the Digital‑Uni caliper series 240.201–240.205. Flat measuring face 10 x 1.5 mm for groove checks Internal measurement from 44 mm onward Stainless steel construction for corrosion resistance Compatible with Digital‑Uni calipers series 240.201–240.205 Accurate groove measurement for quality assurance The insert provides a flat measuring face that is 10 x 1.5 mm, specifically shaped to access narrow grooves and slots with repeatable contact. By concentrating the contact area, the design reduces tilting and measurement scatter, which translates into more consistent internal diameter readings. This targeted geometry benefits workshop and production environments where quick verification of recesses is required without swapping to specialist gauges. Durable stainless‑steel design for reliable results Manufactured from stainless steel, the insert resists corrosion and maintains its geometry through frequent use. The material choice supports stable thermal behaviour and eases cleaning after exposure to cutting fluids or shop contaminants, thereby safeguarding long‑term accuracy. With a compact mass of 0.1 kg and robust construction, the accessory remains rigid during measurement, helping to reduce operator‑induced variability and maintain process control. Fast integration into existing caliper workflows Engineered for straightforward mounting on the Digital‑Uni calipers (series 240.201–240.205), this insert simplifies tool changes and minimises downtime. The insert’s 80 mm active length and compatibility mean the caliper can be adapted quickly from external to internal groove measurement without additional instruments, supporting a more efficient inspection routine and a reduced error budget. This integration supports lean inspection flows and helps keep throughput steady. For precise groove and recess checks, request the M240.215 internal measuring insert from Metav Werkzeuge in Emmerich or get tailored advice from our technical consultants via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M240.215 SKU: M240.215 GTIN: 4061905053726 Material: stainless steel Facts Weight: 0.1 kg Overall length: 100 mm Measuring face: 10 x 1.5 mm Insert active length L: 80 mm Internal measurement from: 44 mm Special features Compatibility: Digital‑Uni calipers series 240.201–240.205 Application: groove and recess measurement Construction: flat measuring face for stable contact Finish: corrosion‑resistant stainless steel FAQ Is this insert suitable for measuring narrow grooves? Yes. The M240.215 insert features a flat measuring face (10 x 1.5 mm) that is specifically intended for groove and slot measurement, allowing stable contact and repeatable internal readings. Which calipers does the insert fit? The insert is compatible with the Digital‑Uni caliper series 240.201–240.205 and mounts to those units to enable internal groove and recess checks without additional adapters. What material is the insert made from and why does that matter? The insert is made from stainless steel, chosen for corrosion resistance and dimensional stability; this supports long‑term accuracy under normal workshop conditions. From what internal diameter can this insert be used? The design allows internal measurement from 44 mm onwards, making it suitable for medium‑sized bores, recesses and grooves within that range. Can this insert be used for external measurements? This accessory is designed for internal applications; external measurement capability is provided by the caliper body when fitted with the standard external jaws. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
why digital calipers accelerate accurate measurement
A digital caliper is a precise length-measuring instrument that captures measurements electronically and shows them on an LCD display, making read‑out immediate and error‑free. Compared with analogue calipers it delivers higher accuracy, faster operation and the option to store or transfer measurements, which speeds up inspection and reduces rework. Metav supplies digital calipers from leading manufacturers, ready for industry, workshop and laboratory use.
how digital calipers are used in industrial settings
Digital calipers work by converting linear displacement into an electronic signal via a capacitive sensor, with a clear LCD display and a zero function at any position. Many models allow switching between mm/inch and provide data output for direct integration into measurement systems. Construction in stainless steel and optional protection ratings such as IP54 make them robust enough for shop‑floor tasks. Typical measuring ranges include 0–150 mm and 0–300 mm, covering most component inspection needs.
key performance benefits that improve your workflow
- Rapid, error‑free readings thanks to the LCD display and direct digital output, reducing inspection time.
- Consistent repeatability with a resolution commonly of 0.01 mm, which minimises corrective work.
- Flexible operation with zero at any position and quick conversion between mm/inch, speeding setup and measurement changes.
- Durable design (stainless steel housing, optional IP54) for low maintenance and long service life.
- Seamless data handling where data output is available, enabling faster documentation and process control.
metav industryline and chosen manufacturers as practical options
Metav IndustryLine provides precise, dependable measuring tools designed for everyday use in production and quality assurance. For users seeking cutting‑edge electronics and enhanced connectivity, Microtech offers innovative digital calipers with advanced data features; Filetta supplies robust, economical alternatives for routine workshop tasks. Metav combines its product range with local stock and expertise: more than 48,000 customers trust Metav, and the company offers over 250,000 products from its Emmerich location, acting as a quality filter for the european market.
concise summary
digital calipers deliver fast, repeatable and easily transferable measurements for metalworking, plastics and electronics, with common specifications such as 0.01 mm resolution, 0–150 mm / 0–300 mm ranges and data output options. Metav’s range, including Metav IndustryLine, Microtech and Filetta, covers both high‑precision and cost‑effective needs.
FAQ
what measuring range should i choose for digital calipers?
Choose the measuring range based on the largest dimension you need to check; common options are 0–150 mm for general components and 0–300 mm for larger parts. digital calipers with an appropriate range avoid unnecessary repositioning and speed up inspection.
how precise are digital calipers for repeat measurements?
Digital calipers typically offer a resolution of 0.01 mm and, with a capacitive sensor and solid construction, provide high repeatability suitable for quality control and assembly tasks.
can i connect digital calipers to a pc or measurement system?
Yes. Models with data output support direct transfer of measurements to a pc or data logger, simplifying traceability and statistical process control when used in inspection workflows.
are digital calipers suitable for workshop environments?
Many digital calipers feature a stainless steel housing and protection ratings such as IP54, making them durable enough for the workshop while remaining easy to maintain.
what is the difference between metav industryline, microtech and filetta calipers?
Metav IndustryLine focuses on reliable, well‑manufactured tools for everyday precision; Microtech targets advanced functionality and connectivity for demanding applications; Filetta provides robust, value‑oriented instruments for routine workshop use. Metav packages these choices with local stock and industry expertise from Emmerich.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com