Digital calipers for fast, reliable dimensional control
Digital calipers and precision calipers deliver fast, repeatable length measurements for metalworking, woodworking and electronics applications, reducing rework and speeding up inspection workflows. Designed with robust stainless steel bodies, high-resolution digital displays and capacitive sensors, these measuring tools provide high accuracy, easy data output and mm/inch conversion for seamless integration into quality processes. Suitable for production, workshop and lab use, they offer durable performance and intuitive operation to support consistent tolerance control.
200mm Digital Caliper Antimagnetic Stainless Steel Round Depth Rod, 4‑Function Measurement, DIN 862 - Metav IndustryLine
Combine a 200 mm measuring range, non-magnetic stainless steel construction and a clear digital display for dependable workshop measurements and faster inspection routines. Order the (Digital caliper M216.176) directly via (Metav Werkzeuge) or ask our consultants if needed. 200 mm measuring range for standard workshop tasks Non-magnetic stainless construction Digital display with ON/OFF, ZERO, UNIT, HOLD Four measuring functions: inside, outside, depth, step Durable, anti‑magnetic construction for repeatable results The body is made from non-magnetic stainless steel, an advantage where magnetic interference or corrosion resistance matters for consistent readings. This robust build reduces the risk of distortion during daily use and supports long service life; combined with compliance to DIN 862, the instrument gives a reliable baseline for routine quality checks and assembly tasks. Fast readings and simple controls for efficient inspection A clear digital display with ON/OFF, ZERO, UNIT, HOLD functions speeds up pass/fail checks and reduces interpretation errors compared with analogue scales. The unit selection lets operators switch between millimetres and inches quickly, while the 3 V power supply ensures low-maintenance operation. Integrated RB 5 data output enables straightforward transfer of measured values into traceability systems or SPC workflows. Practical range and four measuring modes for universal use Classified in the Standard (100–300 mm) category, the 200 mm range covers most workshop and machine‑shop applications by balancing reach and rigidity. The instrument offers four measuring functions — external, internal, depth and step — and includes a round depth gauge for reliable measurements in recesses and stepped parts. This versatility reduces the need for multiple separate gauges during layout and inspection. Built for day‑to‑day accuracy and process integration At roughly 0.3 kg, the caliper remains handheld and manageable for repeated one‑person checks, while its design supports fast positioning and stable measurement. The digital interface and data output option help integrate the tool into documented inspection routines, increasing throughput and easing audit preparation. For workshops seeking consistent measurement data without complex setup, this instrument delivers repeatable results with minimal training. Contact Metav Werkzeuge for application advice and quick delivery of the Metav IndustryLine digital caliper M216.176 to ensure the right measuring solution for the workshop. Technical data SKU: M216.176 Manufacturer: Metav IndustryLine GTIN: 4054469168227 Tariff number: 90173000 Key measurements Measuring range: 0–200 mm Weight: 0.3 kg Jaw length: 50/24 Power: 3 V Data output: RB 5 Special features Material: non-magnetic stainless steel Antimagnetic Digital display with ON/OFF, ZERO, UNIT, HOLD Four measuring functions: external, internal, depth, step Round depth gauge included Complies with DIN 862 FAQ What measuring functions does this caliper offer? The instrument provides external, internal, depth and step measurements; the 4‑function capability is implemented on the Digital caliper M216.176 for versatile inspection work. Is the material suitable for corrosive environments? Yes, the Digital caliper M216.176 is made from non‑magnetic stainless steel, which improves resistance to corrosion compared with plain carbon steels. Can measurement data be exported to a computer? Yes, the caliper includes an RB 5 data output for transferring measured values into inspection software or data‑collection systems. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200mm Digital Caliper Inductive System 0.01mm Resolution IP67, Data/Bluetooth, Four-Function, Hardened Stainless Steel - Metav IndustryLine
Reliable 200 mm measuring range, an inductive system and Bluetooth data output combine to deliver repeatable results and streamlined logging for production and inspection tasks. With IP67 protection and a 0.01 mm display, this caliper keeps measurements stable in workshop conditions. Order directly via Metav Werkzeuge or consult our advisors for application-specific guidance. Digital caliper M216.187 — 200 mm, IP67, Bluetooth The Digital caliper M216.187 is a 200 mm digital measuring instrument with an inductive sensing system, intended for standard workshop measurement and quality-control tasks. Inductive measuring system (DIN 862) IP67 protection for washdown conditions Bluetooth data output for traceable records 0.01 mm resolution and mm/inch display Precision and reliability for everyday metrology The caliper uses an inductive system matched to DIN 862, offering a robust sensing principle that is less sensitive to contamination than many contact sensors. With a measuring range of 200 mm and a 0.01 mm display step, the instrument suits the Standard category of calipers commonly used in machine and metalworking environments, where reach, stiffness and one‑hand operability are balanced. The construction from hardened stainless steel and the integrated locking screw assist in keeping measurements reproducible during handling, so routine checks and batch inspections run with consistent outcomes. Seamless data transfer to speed inspection workflows Equipped with Bluetooth data output and a digital interface with mm/inch selection and MODE controls, this caliper reduces manual logging and transcription errors, supporting faster quality documentation. The wireless data stream enables direct input into measuring software or data collection systems, improving throughput in inspection routines. Traceability is strengthened when measurement values are captured electronically, helping to integrate the instrument into statistical process control and production reports without manual re‑entry. Built for workshop conditions and versatile measurement An IP67 rating and robust materials make the instrument tolerant of coolant splash and dusty environments typically found at the bench or on the shop floor. The device's modest mass (0.4 kg) and balanced jaw geometry support confident handling for inside, outside, depth and step measurements — the four-way measurement capability expands its utility across component geometries. The combination of protective design and practical ergonomics provides a dependable tool for everyday dimensional control. Contact Metav Werkzeuge for tailored advice and to secure this Metav IndustryLine 200 mm digital caliper with Bluetooth data output Technical data SKU: M216.187 Brand: Metav IndustryLine GTIN: 4054469146386 Norm: DIN 862 Facts Measuring range: 0–200 mm Resolution: 0.01 mm Resolution (in): 0.0005 in Weight: 0.4 kg Protection class: IP67 Special features Inductive measuring system Bluetooth data output Digital display with MODE, mm/inch and 0/ON/OFF Locking screw Hardened stainless steel construction Four-way measurement capability DIN 862 compliance FAQ What measurement resolution and repeatability does the caliper offer? The caliper provides a display resolution of 0.01 mm; for a 200 mm instrument the standard digital caliper accuracy reference is typically expressed with a measurement uncertainty in the same class used for workshop inspection. Is the instrument suitable for use in wet or dusty production areas? Yes, the IP67 protection rating and stainless steel construction make the device resistant to splash and ingress from dust, supporting reliable use in typical workshop conditions. Can this caliper record internal, external, depth and step measurements? Yes, the instrument supports four-way measurement (inside, outside, depth and step), which extends its usefulness across a wide range of component checks. How are measured values exported for documentation? Measured values are transmitted via Bluetooth data output and can be captured by compatible data collection or inspection software for direct documentation and traceability. Does the caliper conform to a recognised standard? The design and measuring concept comply with DIN 862, indicating adherence to the conventional specifications for calipers used in industrial metrology. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200mm Digital Caliper Inductive System IP67, 0.01mm Resolution, Four-Function, Supplied in Case - Metav IndustryLine
Benefit from a rugged, shopfloor-ready caliper that combines a sealed IP67 enclosure with an inductive measuring system and centimetre-grade reach — ideal for reliable dimensional control in production. Order the device directly via Metav Werkzeuge or consult our advisors for procurement and delivery options. Digital Caliper M216.182 – 200 mm, IP67, inductive system (Metav IndustryLine) The Digital Caliper M216.182 is a 200 mm, DIN 862‑compliant measuring instrument with an IP67‑sealed inductive measuring system, designed for robust, everyday workshop and quality‑control applications. IP67 dust- and water-resistant construction Inductive measuring system for stable readings 0.01 mm resolution with mm/inch quick toggle Hardened stainless steel construction Reliable measurement on the shopfloor The sealed construction with IP67 rating protects internal electronics from coolant, dust and splash exposure, reducing downtime caused by contaminated instruments. The inductive measuring system resists signal loss from chips or fluids and offers consistent performance cycle after cycle. Classified in the Standard measuring range (0–300 mm), this 200 mm instrument balances reach and rigidity for most machine‑shop tasks, ensuring reproducible checks of components, fixtures and assemblies in daily production. Clear readouts and versatile measuring modes With a 0.01 mm display step and a quick mm/inch toggle, the instrument supports rapid conversion and high‑resolution inspection. The integrated keys (MODE, mm/inch, 0/ON/OFF) simplify workflow changes and the lock screw secures a measurement for transfer or documentation. The caliper also provides four measuring functions — external, internal, depth and step — so a single tool covers multiple checking tasks, reducing tool changes and speeding up quality routines. Robust build for long service life and traceable results Constructed from hardened stainless steel, the device resists wear and corrosion, preserving jaw geometry and measurement integrity over time. The compact digital module is designed for dependable operation while adding only around 0.4 kg of handling mass, which aids manoeuvrability during repetitious inspections. Supplied to industry tolerances under DIN 862, this instrument supports stable metrology routines; combined with Metav’s distribution, it benefits from local stock and a European quality filter that keeps logistics and spare parts straightforward. For IP67‑rated precision from Metav IndustryLine and procurement assistance from Metav Werkzeuge in Emmerich, contact sales at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss delivery and suitability for current inspection routines Technical data Article number: M216.182 GTIN: 4054469146348 Category: Calipers (digital) Core specifications Measuring range: 0–200 mm Resolution: 0.01 mm Readability (inch): 0.0005 in Protection class: IP67 Weight: 0.4 kg Jaw length: 50/24 mm Materials & features Material: hardened stainless steel Measuring principle: inductive system Standard: DIN 862 Display: digital with MODE, mm/inch, 0/ON/OFF keys Lock screw for fixed measurements Four measuring functions: external, internal, depth, step FAQ Is this caliper suitable for use near coolants and oils? Yes. The device features an IP67 enclosure and an inductive measuring system, so the Digital Caliper M216.182 is designed to withstand splashes and contaminants common on the shopfloor. What measurement resolution and accuracy can be expected? The display provides 0.01 mm resolution and a readability of 0.0005 in; the instrument conforms to DIN 862 for digital calipers in its class. Can the caliper measure inside and depth dimensions? Yes. The instrument supports four measuring functions — external, internal, depth and step — making it versatile for a range of inspection tasks. Does the caliper offer quick unit conversion? The caliper includes a dedicated mm/inch toggle for immediate conversion between metric and imperial readings. Who supplies this caliper and where is procurement handled? This product is part of the Metav IndustryLine offering and is distributed through Metav Werkzeuge with stock and logistics managed from Emmerich. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200mm Digital Caliper Large LCD Display Removable Roller, Metal Body, DIN 862, ISO 17025 Calibrated Certificate, Plastic Case - Metav IndustryLine
The combination of stainless-steel, hardened construction and a large LCD readout ensures reliable daily use and clear readings on the shop floor; the integrated RB 5 data output supports digital traceability and process documentation. Order the digital caliper directly via Metav Werkzeuge or consult our specialists for application advice. Digital caliper 200 mm — Metav IndustryLine, removable roller & large LCD Digital caliper 200 mm is a workshop-ready measuring instrument for general machining and quality control tasks, designed for robust handling and accessible data transfer. Digital readout with ZERO/UNIT/HOLD keys Hardened stainless steel frame with glass scale Removable roller for cylindrical measurements Four measurement modes: inside/outside/depth/step Accurate range for everyday workshop use The instrument covers a 0–200 mm measuring range, which places it in the standard workshop category ideal for the majority of machine‑shop and metalworking tasks. This span balances reach and rigidity, allowing confident single‑hand operation when measuring parts such as housings, shafts and fixtures. Built to DIN 862, the caliper supports routine dimensional checks and quality-control processes where consistent repeatability matters. The combination of a robust frame and a protected scale reduces the risk of measurement drift under normal workshop conditions. Robust build protects electronics and improves readability A hardened stainless‑steel body and a glass scale provide long‑term wear resistance while the metal‑cased electronics shield the display and circuitry from knocks and contamination. The unit features a large LCD with dedicated ON/OFF, ZERO, UNIT and HOLD controls, making it quick to read and simple to operate even in busy production environments. The metal housing contributes to mechanical stability, which helps maintain reliable sensor contact and supports steady measurements over repeated use. Practical functions for production measurement tasks This caliper supports fourfold measurement — external, internal, depth and step — so one instrument replaces several separate gauges in daily workflows. A removable drive roller is supplied, enabling easier measurement of cylindrical components and enabling use with or without the roller depending on the task; the roller interface is provided as a fitting component in the set. For digital integration, the RB 5 data output allows connection to data loggers and inspection software, supporting traceable documentation and simplified batch reporting. Designed for straightforward handling and workshop integration With a compact jaw geometry (jaw length 50/24 mm) and a weight of approximately 0.52 kg, the caliper is easy to position and manoeuvre on most workpieces. The robust construction keeps calibration intervals realistic for heavy use while the clear controls reduce operator error. Delivered ready for immediate use, the instrument suits quality departments, toolrooms and maintenance workshops that require reliable, documented measurements and a straightforward route to digital data capture. Contact Metav Werkzeuge today for tailored advice on integrating this Metav IndustryLine caliper into production or inspection workflows and to arrange supply from our Emmerich facility. Technical data Article number: M216.126.N GTIN: 4054469159683 Weight: 0.52 kg Measuring range: 0–200 mm Material: stainless steel, hardened; scale with glass slide; electronics in metal housing Standard: DIN 862 Data output: RB 5 Power supply: 3 V Jaw length: 50/24 mm Digital display: ON/OFF, ZERO, UNIT, HOLD Removable roller supplied Four measurement modes: external, internal, depth, step Core specifications Measuring principle: digital caliper Measurement span category: standard (100–300 mm) Housing: metal‑encased electronics Scale type: glass slide Operating battery: 3 V Weight: 0.52 kg Special features Removable drive roller for cylindrical parts Large, easy‑to‑read LCD Conforms with DIN 862 Robust, hardened stainless‑steel construction Suitable for workshop and quality‑control use FAQ What measuring functions does this caliper provide? The digital caliper 200 mm offers fourfold measurement: external, internal, depth and step measurements are all supported for versatile workshop use. Can measurement data be transferred to inspection software? Yes, the caliper features an RB 5 data output that enables connection to data collection devices and inspection systems for traceable measurement recording. Is the instrument suitable for general machine‑shop work? Conforming to DIN 862 and covering a 0–200 mm range, the caliper is designed for standard machine‑shop and metalworking tasks where balanced reach and rigidity are required. Does the caliper include any accessories for measuring shafts? A removable drive roller is supplied with the caliper to simplify measurement of cylindrical components; the roller can be fitted or removed depending on the measurement task. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200mm Digital Caliper Large LCD Display, mm/inch Reset, Depth Rod, Locking Screw, CR2025 Battery, DIN 862 - Filetta
Take advantage of 0.01 mm resolution together with USB data output for fast, reliable documentation and consistent workshop results; order the Filetta digital caliper directly via Metav Werkzeuge or contact our consultants for application advice. Digital Caliper M909.441 — 0–200 mm, 0.01 mm resolution, USB (Filetta) Digital Caliper M909.441 is a precise 0–200 mm measuring instrument for workshop and quality-control tasks, equipped with a large LCD, depth gauge and USB data output for seamless process integration 0.01 mm resolution for fine measurements USB data output for digital logging Large LCD with mm/inch and reset Locking screw and integrated depth gauge Accurate measurements where it matters The caliper delivers a 0.01 mm resolution while conforming to DIN 862, providing a trustworthy baseline for routine checks in production and inspection. Its 0–200 mm span places it in the standard workshop category, offering a balanced reach with sufficient stiffness for machining and metalworking tasks. A 50 mm jaw length supports secure clamping of small to medium components and the locking screw fixes readings during transfer, reducing the risk of error and rework. Faster data capture and fewer transcription errors Equipped with a USB data output and a large LCD, the instrument streamlines documentation: measurements can be exported to spreadsheets or quality software without manual re-entry. The display provides mm/inch switching and a reset function, while the integrated on/off control conserves battery life. Powered by a CR2025 cell, the caliper is ready for immediate use and simple battery replacement, making it a practical choice for busy inspection stations wanting to improve traceability and throughput. Practical handling for everyday workshop routines The design focuses on reliable operation rather than complexity: this version is supplied without ABS absolute-position functionality, which keeps zeroing straightforward via the reset key. The caliper includes a built-in depth gauge for bore or recess checks and a clear, high-contrast display for quick readouts under workshop lighting. Robust construction and intuitive controls support consistent results during repetitive tasks, while the combination of digital readout and mechanical features ensures measurements remain reproducible across shifts. For precise measurement and seamless data handling, contact Metav Werkzeuge in Emmerich to discuss the Filetta Digital Caliper M909.441 or to request advice by e‑mail at info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical data Article number: M909.441 GTIN: 4061905448836 Brand: Filetta Category: Calipers / Measuring instruments Numbers / Core technical data Measuring range: 0–200 mm Resolution: 0.01 mm Jaw length: 50 mm Battery: 1 × CR2025 Display type: Large LCD Special features USB data output Digital display with mm/inch and reset functions On/off switch Locking screw for fixed readings Integrated depth gauge Conforms to DIN 862 Supplied without ABS absolute-position system FAQ What measuring range does this caliper cover? The caliper covers a measuring range of 0–200 mm, making it suitable for standard workshop and machine-shop dimensions. What resolution and standard compliance can be expected? Resolution is 0.01 mm and the instrument conforms to DIN 862, providing industrially recognised tolerances for routine inspection. How are measurements transferred to a PC? Measurements are output via USB, enabling direct logging into spreadsheets or quality software from the caliper. Which power source does the instrument use and is battery replacement straightforward? The unit runs on a CR2025 battery; replacement is simple and designed for low downtime in the workshop. Can the caliper measure depth and steps as well as outside dimensions? Yes, the integrated depth gauge supports depth checks, and the jaw geometry allows reliable outside and step measurements. Manufacturer / Responsible: Schut Geometrische Meettechniek bv; Duinkerkenstraat 21; 9723 BN Groningen; The Netherlands; +31 50 5877877; schutnl@schut.com
200mm Digital Caliper LCD With Moment Lock, mm/inch, 0.01mm Resolution, Four-Function Measurement, Plastic Case - Metav IndustryLine
Benefit from the combination of hardened stainless-steel construction, a 200 mm measuring range and a repeatable moment lock for consistent, workshop-ready results; order the caliper directly via Metav Werkzeuge or contact our consultants for application advice. M216.082 Digital Caliper — 200 mm, hardened stainless steel, moment-lock (Metav IndustryLine) The M216.082 Digital Caliper is a 200 mm workshop-grade digital caliper designed for precise external, internal, depth and step measurements across mechanical engineering and precision workshops. Hardened stainless-steel construction 200 mm measuring range, DIN 862 compliant Digital display with mm/inch and zero Moment-lock for reproducible contact pressure Consistent accuracy for everyday quality control The instrument delivers a resolution of 0.01 mm (0.0005 in) and complies with DIN 862, making it suitable for standard machine‑shop tolerances and routine inspection tasks. The combination of a hardened stainless‑steel beam and a moment‑locking mechanism reduces operator‑induced variation by fixing the contact pressure once the jaws are set; this yields reproducible readings and shortens inspection cycles. The caliper is therefore a practical choice where traceable, repeatable linear measurements are required without the overhead of specialist metrology equipment. Robust design built for workshop handling Constructed from hardened stainless steel, the tool balances stiffness and corrosion resistance for long service life in a production environment. The measured mass of 0.6 kg gives a reassuring feel while remaining manageable for single‑hand operation. The carefully proportioned jaw geometry (jaw length 50/24 mm) maintains rigidity for external and internal measurements, helping to avoid deflection on medium-sized components. As a result, the instrument performs well on bench work and in mobile inspection routines within fabrication and assembly areas. Intuitive digital readout and reproducible measurement routine The clear digital display features ON/OFF, ZERO and mm/inch switching for rapid setup and format changes, while the device includes a standardised data output (RB 1) for downstream logging or SPC integration. The moment lock enables a defined contact force to be set and held, reducing variable pressing force as a source of measurement error. These attributes shorten operator training time and improve first‑pass yield in repetitive measurement tasks, offering a measurable productivity gain in production and quality assurance workflows. Four measurement functions for versatile applications Equipped for external, internal, depth and step measurements, the caliper covers most everyday workshop needs without the need to swap instruments. The fourfold measurement capability streamlines inspection sequences and reduces handling errors when moving between features on a single component. Certified to the DIN standard, the instrument is a versatile metrology tool that supports routine quality control, incoming inspection and setup checks on machine tools and fixtures. For guaranteed precision and prompt delivery from Metav Werkzeuge, request a technical quote for the Metav IndustryLine M216.082 digital caliper by emailing info@metav-werkzeuge.com or calling +49 2822 7131930 Technical data Article number: M216.082 GTIN: 4054469168388 Manufacturer: Metav IndustryLine Weight: 0.6 kg Material: hardened stainless steel Facts Measuring range: 0–200 mm Resolution: 0.01 mm / 0.0005 in Norm: DIN 862 Jaw length: 50/24 mm Data output: RB 1 Special features Digital display with ON/OFF, ZERO and mm/inch Moment‑lock for reproducible contact pressure Fourfold measurement: external, internal, depth, step FAQ What accuracy and resolution does this caliper provide? The M216.082 digital caliper offers a resolution of 0.01 mm (0.0005 in) and is designed to meet the accuracy expectations defined by DIN 862 for workshop calipers. Can the instrument measure internal and depth dimensions? Yes, the caliper supports fourfold measurement—external, internal, depth and step—which makes it suitable for a wide range of workshop inspection tasks. Is the caliper suitable for routine production use? The hardened stainless‑steel construction, moment‑lock and clear digital readout make the M216.082 appropriate for repeated use in production and quality control environments. Does the caliper support data output for process control? The device includes a data output (RB 1) that can be used for logging or integration into SPC workflows. Which standard does the caliper comply with? The instrument is manufactured to conform with DIN 862, ensuring it meets common workshop and inspection standards. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200mm Digital Caliper Preset Removable Roller, 4‑Function, Stainless Steel, DIN 862 - Metav IndustryLine
Benefit from the combination of preset zeroing, a removable drive roller and hardened stainless steel construction for reliable, repeatable readings in production and inspection. Order the digital caliper directly via Metav Werkzeuge or ask our consultants if needed. Metav IndustryLine Digital caliper M216.126.P — 200 mm, preset & removable roller A Digital caliper 200 mm (preset) for workshop and quality-control use, fitted with a removable drive roller and metal-housed electronics for robust data acquisition Preset function with SET/PRESET button Removable drive roller for versatile measuring Hardened stainless steel with glass scale Four measuring modes for all measurement types Rapid, repeatable readings for production workflows The Digital caliper 200 mm, preset delivers quick, actionable measurements that integrate easily into existing workflows. The preset feature enables fast zeroing or reference-setting via the SET/PRESET control, reducing cycle time for repeat checks and avoiding manual re-zero errors. An integrated RB 5 data output allows transfer of readings to data-collection systems, supporting traceable documentation and simple quality-data capture. With a modest mass of 0.52 kg, the instrument remains easy to manipulate during repetitive tasks while providing steady contact between jaws and component. Durability that suits the workshop environment Construction from hardened stainless steel and a glass scale gives the caliper resilience against wear, while the electronics are protected within a metal housing for improved longevity under workshop conditions. The removable drive roller is supplied as a practical option for measuring round or profiled parts without changing the measuring technique, and the jaw lengths of 50/24 mm give stable contact geometry for external and internal measurements. Compliance with DIN 862 ensures the tool fits recognised workshop standards and integrates with established inspection routines. Practical handling and quality-assurance support Classified in the standard range for hand calipers, this instrument covers the typical workshop span up to 200 mm, offering the balance between reach and rigidity that most metalworking tasks require. Four measuring functions—internal, external, depth and step—are available, enabling one instrument to replace multiple simple gauges. The digital display is operated with an ON/OFF and SET/PRESET interface, simplifying everyday use and reducing operator training time. Data transfer via RB 5 supports automated logging and helps to maintain consistent documentation for production or incoming inspection. Contact Metav Werkzeuge for personalised advice on the Metav IndustryLine digital caliper M216.126.P, request further technical details or discuss integration options by phone or e‑mail Technical Data Article number: M216.126.P GTIN: 4054469167893 Tariff number: 90173000 Category path: Messgeräte › Messschieber Facts Measurement range: 0–200 mm Weight: 0.52 kg Power supply: 3 V Data output: RB 5 Standard: DIN 862 Special features Material: hardened stainless steel; glass scale; electronics in metal housing Preset function with SET/PRESET and ON/OFF Removable drive roller included Four measuring modes: internal, external, depth, step Jaw lengths: 50/24 mm FAQ What measuring tasks is this caliper best suited to? The Metav IndustryLine digital caliper M216.126.P is aimed at standard workshop and machine-shop tasks up to 200 mm, covering external, internal, depth and step measurements. How is zeroing handled on this instrument? Zeroing and reference setting are performed using the SET/PRESET button; the preset function on the M216.126.P allows quick establishment of a measurement baseline. Can measurement values be exported to a PC or data-collection system? Yes, the caliper provides an RB 5 data output for connection to data-collection devices, enabling straightforward transfer of readings for documentation. Is the caliper robust enough for daily shop-floor use? With a hardened stainless steel construction, glass scale and metal-housed electronics, the instrument is built to withstand regular workshop handling. Does the caliper meet recognised standards? The tool conforms to DIN 862, aligning it with common workshop and inspection standards in mechanical engineering. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200mm Digital Caliper With Carbide Measuring Faces, Removable Roller, 4‑Function, DIN 862, Supplied In Case - Metav IndustryLine
Take advantage of the combination of a 200 mm measuring range, hardened stainless-steel construction with carbide measuring faces and integrated data output for reliable workshop measurement and traceable documentation. Order the instrument directly via Metav Werkzeuge or consult the Metav technical team for specification matching. Digital Caliper 200 mm, with carbide measuring faces and removable roller (DIN 862) A Digital Caliper 200 mm designed for workshop and quality-control use, offering hardened stainless-steel construction, a clear digital readout and DIN 862 conformity for dependable dimensional checks. Carbide measuring faces for durability 200 mm range, compliant with DIN 862 Fourfold measurement: inside, outside, depth, step RB 5 data output; ON/ZERO/UNIT/HOLD display Robust range and workshop suitability for everyday quality control The caliper sits in the Standard class (measuring range up to 300 mm), which balances reach and stiffness for most machine‑shop and metal‑working tasks. The 0–200 mm range provides sufficient coverage for typical components while keeping the instrument compact and easy to handle during repetitive checks. Conformity with DIN 862 guarantees that dimensional routines and inspection records meet recognised workshop standards, supporting consistent process control and straightforward integration into existing quality procedures. Durable measuring faces and clear digital operation for repeatable results Equipped with carbide measuring faces and a hardened stainless-steel beam with a glass scale, the instrument maintains contact geometry under frequent use and resists wear that would otherwise affect accuracy. The digital display includes ON/OFF, ZERO, UNIT and HOLD functions, providing quick unit changes and temporary value retention for hands‑free documentation. The combination of robust materials and simple display controls reduces rework caused by worn jaws or ambiguous readings, improving inspection throughput and reproducibility. Practical handling features that speed up shop workflow A removable roller and a jaw arrangement with a jaw length of 50/24 mm support measurements in confined or recessed areas and simplify cleaning after use. The caliper’s fourfold measurement capability—outside, inside, depth and step—covers the most common dimensional tasks with a single instrument, cutting the need to change tools during an inspection sequence. Delivered in a protective transport case, the device is protected during storage and transit, so it arrives on the workbench ready for immediate use. Data capture and traceability for modern production environments The instrument provides an RB 5 data output for straightforward transfer of readings to logging systems or data collectors, helping to reduce transcription errors and to build inspection traceability. For workshops seeking to document process capability or to feed measurement values into SPC routines, the digital interface facilitates connectivity. The compact design and clear ergonomics make this caliper a practical choice for bench inspection, jig‑set checks and in‑process control. For reliable workshop precision from Metav IndustryLine and tailored advice on integrating the caliper into existing inspection routines, contact Metav Werkzeuge for detailed technical guidance and order support. Technical data Article number: M216.098.N GTIN: 4054469159669 Norm: DIN 862 Label: Digital Caliper 200 mm, with carbide measuring faces, removable roller Facts Measuring range: 0–200 mm Weight: 0.5 kg Jaw length: 50/24 mm Power supply: 3 V Tariff number: 90173000 Special features Carbide measuring faces (HM) Hardened stainless-steel construction; scale with glass beam Fourfold measurement: outside / inside / depth / step Digital display with ON/OFF, ZERO, UNIT, HOLD keys RB 5 data output for measurement transfer Delivered in a protective case for transport FAQ What inspection tasks is this caliper best suited for? The Digital Caliper 200 mm (Metav IndustryLine, SKU M216.098.N) is intended for general workshop and quality‑control tasks where a 0–200 mm range and robust measuring faces are required; typical uses include component checks, jig set‑ups and incoming inspection. Does the instrument comply with recognised standards? Yes, the caliper is manufactured to DIN 862, ensuring it meets commonly accepted dimensional and functional requirements for mechanical workshop measuring tools. Can measurement values be transferred to a data logger? The caliper features an RB 5 data output, enabling direct transfer of readings to compatible data loggers or SPC systems to support traceable documentation and to reduce manual entry errors. What is the benefit of the carbide measuring faces and glass scale? Carbide faces reduce wear at the contact points, extending service life and maintaining measurement accuracy under frequent use; the glass scale supports precise, stable guidance of the slider and contributes to repeatable results. Is the roller necessary and what does removable roller enable? The removable roller allows flexible handling for specific geometries and simplifies cleaning and maintenance of the measuring faces; when not required, it can be removed to ease access in tight measurement situations. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200mm Digital Caliper With Carbide Tips, IP67, Square Depth Rod 3.7×1.3mm, Four‑Point Measuring, Supplied In Case - Metav IndustryLine
Combine carbide measuring faces with IP67 protection for reliable, repeatable measurements on the production floor; the hardened stainless‑steel construction adds long service life. Order the digital caliper directly via Metav Werkzeuge or ask our consultants if needed. Digital caliper M216.159.N — 200 mm, carbide jaws, IP67 The Digital caliper M216.159.N is a 200 mm workshop caliper for general machine‑shop inspection and production control, equipped with carbide measuring faces and a square depth gauge for robust multi‑purpose use. Robust IP67 protection Carbide measuring jaws 200 mm measuring range 0.01 mm digital resolution Four‑function measurement capability Precision and repeatability that supports production control The instrument delivers a 0.01 mm display resolution and an accuracy of ±0.03 mm, making it suitable for standard quality control tasks in metalworking and mechanical assembly. Constructed from hardened stainless steel, the gauge maintains dimensional stability under everyday workshop stresses and complies with DIN 862, the established benchmark for caliper metrology. These specifications translate into predictable measurement results that reduce rework and speed up inspection cycles, so production planning and batch release can proceed with confidence. Built to withstand shop‑floor conditions and reduce downtime With IP67 sealing and carbide jaws, the caliper resists coolant, chips and light immersion, allowing measurement close to the machining centre without sacrificing tool life. The digital display with MODE and SET keys enables quick unit changes and zeroing, while the instrument’s robust build reduces the frequency of replacements. The result is a pragmatic balance of durability and handling efficiency that keeps measurement routines flowing and lowers the total cost of ownership for inspection tools. Practical measurement range and versatile functions for everyday workshops Classified in the Standard range (measuring span up to 300 mm), the device offers the familiar reach expected in machine shops while remaining easy to handle for single‑operator use. The square depth gauge (3.7 × 1.3 mm) and a 50 mm beak length extend measurement versatility to narrow grooves and stepped components. Thanks to the four‑function measurement setup, the caliper covers inside, outside, depth and step measurements without attachment changes, reducing cycle time and limiting operator handling errors. Clear numerical data and easy integration into workflows Numeric details are straightforward: a 0–200 mm measuring range, 0.01 mm display resolution, and ±0.03 mm stated accuracy. The instrument’s weight (0.5 kg) and robust construction make it a familiar, ergonomic tool for repeated use. The combination of these measurable values helps procurement and quality teams compare instruments objectively and select the solution that fits their tolerance budgets and handling preferences. Choose the Metav IndustryLine digital caliper for dependable IP67 performance and carbide durability, and contact Metav Werkzeuge for expert advice and reliable supply at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: M216.159.N GTIN: 4054469178882 Tariff code: 90173000 Facts Measuring range: 0–200 mm Resolution: 0.01 mm (0.0005 in) Accuracy: ±0.03 mm Weight: 0.5 kg Depth gauge: 3.7 × 1.3 mm Beak length: 50 mm Special features IP67 protection Hardened stainless steel body Carbide measuring faces Digital display with MODE and SET keys Four‑function measurement (inside, outside, depth, step) Complies with DIN 862 eCl@ss: 21170344 FAQ What accuracy can be expected for routine checks with this caliper? The M216.159.N provides a stated accuracy of ±0.03 mm, which suits standard workshop inspection and quality control tasks in line with DIN 862. Can the caliper be used on the shop floor near coolant and chips? Yes. The IP67 rating and durable construction allow operation close to machining processes where liquid exposure and particulate contamination occur. Which measurement tasks does the instrument cover? The caliper supports four‑function measurement: external, internal, depth and step measurements are all possible without additional attachments. Are the measuring faces wear‑resistant for long‑term use? The device features carbide measuring faces, chosen for their abrasion resistance and longevity in contact with harder materials. Is this instrument suitable for calibration and traceable inspections? The caliper meets DIN 862 requirements; for traceable calibration options and certificates, please consult Metav Werkzeuge for available calibration services and documentation. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200mm Digital Caliper With Fraction Display 0.01mm/0.0005" 1/128" Four-Function, Stainless Steel, Case - Metav IndustryLine
Take advantage of precise, repeatable readings and a robust, corrosion‑resistant build to streamline quality checks on the workshop floor; the digital display with 0.01 mm resolution and the four measurement functions ensure fast decisions and fewer re-measures. Order the instrument directly via Metav Werkzeuge or consult the Metav team for application advice. M216.172 digital caliper – 200 mm, fraction and inch display, hardened stainless steel The M216.172 is a digital caliper designed for standard workshop and machine‑shop applications, offering a 0–200 mm measuring range with decimal and fraction readouts for flexible inspection tasks. Digital readout mm/inch/fraction 0.01 mm Hardened stainless steel construction Four measurement functions: inside/outside/depth/step RB 6 data output for external recording Accurate readings that speed up quality control The instrument delivers a 0.01 mm resolution on the decimal display and offers an inch resolution of 0.0005" / 1/128", making it suitable for typical metrology and production‑control tasks. The digital electronics include ON/OFF, ZERO and mm/inch/F functions for immediate switching between units and fraction display modes; this reduces conversion errors and accelerates inspection cycles. With a clear digital readout and a data output labelled RB 6, the device supports documented measurements and easier transfer into statistical process control workflows, enhancing traceability in serial production. Robust construction for reliable workshop use Built from hardened stainless steel, the caliper resists daily wear and corrosion while maintaining jaw alignment and repeatability. The 200 mm measuring range places the tool in the standard class of calipers, a practical compromise between reach and stiffness that suits general engineering tasks such as component inspection, fixture set‑up and maintenance checks. The hardened material and solid construction reduce deformation under normal handling, which supports consistent measurement results across the shift and lowers the incidence of rework. Flexible measuring modes and smooth integration into workflows Four‑way measurement capability covers external, internal, depth and step measurements, so fewer instruments are required at the bench and setups remain compact. The fraction display option simplifies work with legacy drawings or parts specified in imperial fractions, while the digital zeroing function enables quick comparative checks. The combination of clear unit switching and an external RB 6 connector makes the caliper an efficient tool for shopfloor tasks where speed, documentation and compatibility with data collection systems matter. For tailored advice on using the Metav IndustryLine M216.172 in specific inspection routines and to check availability from Metav Werkzeuge in Emmerich, contact the Metav team for prompt handling and delivery. Technical Data Article number: M216.172 GTIN: 4054469169002 Tariff number: 90173000 eClass: 21170344 Manufacturer: Metav IndustryLine Facts Measuring range: 0–200 mm Resolution: 0.01 mm Inch/fraction resolution: 0.0005" / 1/128" Display functions: ON/OFF, ZERO, mm/inch/F Digital: yes Special features Material: hardened stainless steel Measurement modes: outside, inside, depth, step Data output: RB 6 Four‑way measurement capability FAQ What accuracy can be expected from the caliper? The M216.172 provides a display resolution of 0.01 mm and an inch resolution of 0.0005" (1/128"), suitable for standard workshop control; repeatability depends on handling and measuring technique. Which measuring tasks are covered by this caliper? The instrument supports external, internal, depth and step measurements, making it versatile for component inspection, jig set‑up and maintenance verification. Is the caliper suitable for corrosive environments? The caliper is constructed from hardened stainless steel, which improves corrosion resistance compared with untreated alloys; routine cleaning after use will prolong service life. Can measurements be transferred to a PC or SPC system? A data output labelled RB 6 is provided for external recording; compatibility with specific systems depends on the receiving equipment and adapter cables. Does the display show imperial fractions as well as decimals? Yes, the unit offers decimal millimetre/inch switching and a fraction display mode (1/128), simplifying work with imperial specifications. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200mm Digital Caliper With Removable Roller, LCD Display, DIN 862, Four-Function Measurement, Supplied In Case - Metav IndustryLine
Take advantage of a robust combination of workshop‑grade construction and digital convenience: the hardened stainless steel slide with glass scale and the removable roller provide reliable handling and efficient rolling checks, while the integrated data output streamlines measurement logging; order directly via Metav Werkzeuge or consult the technical team for specification matching. Digital caliper M216.096.N — 200 mm, removable roller (Metav IndustryLine) The Digital caliper M216.096.N delivers precise outside, inside, depth and step measurements for metalworking and quality control in production and inspection environments. 200 mm measuring range, workshop standard Hardened stainless-steel construction Removable roller for quick rolling checks Four-function measurement capability Precise, verifiable readings for production control The instrument provides a stable, reproducible measuring solution in the common 0–200 mm category, complying with DIN 862 to match workshop and inspection requirements. The clear digital display features ON/OFF, ZERO, UNIT and HOLD keys, which enable straightforward zeroing and unit selection for repeatable readings. With the RB 5 data output, measured values can be exported to data capture systems for traceable logging, improving quality‑control workflows and reducing transcription errors. The combination of an easy-to-read display and a solid measuring concept supports fast decision making on the shop floor. Durable build and versatile measurement modes Constructed from hardened stainless steel and fitted with a glass scale, this caliper is designed for everyday use in machining and maintenance. The removable roller allows quick rolling checks on cylindrical parts while standard jaws cover external and internal dimensions; the tool also performs depth and step measurements, offering full inspection capability in a single instrument. The jaw geometry (50/24 mm) supports secure contact on a variety of components, and the compact mass ensures comfortable handling during repetitive tasks. Practical integration and workshop readiness Weighing approximately 0.5 kg, the measuring tool is robust yet manageable for routine use and inspection. Its four‑function measurement capability (outside, inside, depth, step) makes it a versatile addition to measuring benches and portable kits alike. The digital readout and RB 5 interface support straightforward data transfer into production records or SPC systems. Compliance with DIN standards and the use of corrosion‑resistant materials underline its suitability for metalworking environments, where dependable, repeatable measurements are essential for process control. For procurement or technical advice on the Metav IndustryLine digital calipers, contact Metav Werkzeuge in Emmerich — phone +49 2822 7131930 or email info@metav-werkzeuge.com. Technical Data Article number: M216.096.N GTIN: 4054469159621 Norm: DIN 862 Manufacturer: Metav IndustryLine Eclass: 21170344 Facts Measuring range: 0–200 mm Weight: 0.5 kg Jaw length: 50/24 mm Tariff code: 90173000 Power: 3 V Special features Stainless steel, hardened; scale with glass slide Digital display with ON/OFF, ZERO, UNIT, HOLD Removable roller (detachable) Data output: RB 5 Four‑function measurement: inside, outside, depth, step FAQ What types of measurement can this caliper perform? The Digital caliper M216.096.N supports inside, outside, depth and step measurements, providing four‑function versatility for inspection and workshop tasks. Which standard does the instrument meet? This Metav IndustryLine digital caliper is manufactured in accordance with DIN 862, ensuring conformity with common workshop and inspection requirements. What materials and construction ensure durability? The caliper is made from hardened stainless steel with a glass scale, giving corrosion resistance and stable measurement surfaces suitable for machining environments. Is data output available for system integration? Yes — the caliper features an RB 5 data output for transfer of measured values to compatible data capture or SPC systems. What is the measuring range and how portable is the device? Measuring range is 0–200 mm; the instrument is compact and weighs about 0.5 kg, making it suitable for bench and portable inspection tasks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200mm Digital Caliper With Square Depth Rod 3.7×1.3mm, 0.01mm Resolution, IP67, Four‑Function, Hardened Stainless Steel - Metav IndustryLine
Take advantage of precise measurement, robust protection and versatile four‑way measuring capability to streamline inspection tasks on the shop floor. The combination of IP67 water‑ and dust resistance and 0.01 mm readout ensures reliable results even in humid or coolant‑exposed environments. Order the caliper directly via Metav Werkzeuge or contact our consultants for application advice. Digital caliper 200 mm (IP67) with rectangular depth rod 3.7 x 1.3 mm — Metav IndustryLine A Digital caliper 200 mm (IP67) designed for workshop and machine‑shop use, offering reliable outside, inside, depth and step measurements with a robust stainless‑steel construction. IP67 protection for dust and water resistance 0.01 mm resolution with MODE and SET functions Hardened stainless steel construction Four‑way measurement: inside, outside, depth, steps Accurate measurement that speeds up inspection The 200 mm digital caliper delivers 0.01 mm resolution on a clear digital display, paired with an industry‑standard accuracy of ±0.03 mm for this measuring range. Compliance with DIN 862 provides an objective baseline for quality control processes, so measurement results can be compared across shifts and suppliers. The precise readout shortens inspection cycles and reduces rework by helping operators make decisive adjustments faster; in production environments the result is improved throughput and fewer stoppages. Built to withstand workshop conditions and simplify handling A hardened stainless steel frame and IP67 ingress protection combine to make this caliper resilient against chips, coolant and light wash‑down. The rectangular depth rod (3.7 x 1.3 mm) permits stable depth measurement in narrow bores and stepped features that round rods struggle to reach. The display includes MODE and SET controls for quick unit changes and zeroing, enabling straightforward one‑person operation even on the shop floor. Robust materials and protected electronics lower downtime and extend service life. Versatile measuring modes and shop‑floor integration This instrument supports four‑way measurement — outside, inside, depth and step — allowing a single tool to replace multiple gauges and reduce tool changes at the bench. Categorised as a standard‑range caliper (measuring range up to 300 mm), it offers the best compromise between reach and stiffness for general machine‑shop tasks. The compact slider and ergonomic thumbwheel allow controlled movement and repeatable contact force, contributing to consistent results across repeated checks. If further technical data or application examples are required, Metav’s consultants can advise on integration into existing inspection routines. For robust, workshop‑ready measurement choose the Metav IndustryLine digital caliper and contact Metav Werkzeuge for tailored advice and ordering assistance. Technical data Article number: M216.152.N GTIN: 4054469178851 Brand: Metav IndustryLine Category: Calipers Standard: DIN 862 Facts Measuring range: 0–200 mm Resolution: 0.01 mm (0.0005 in) Accuracy: ±0.03 mm Weight: 0.5 kg Protection class: IP67 Tariff number: 90173000 Special features Material: hardened stainless steel Depth rod: rectangular 3.7 x 1.3 mm Digital display with MODE and SET buttons Four‑way measurement: inside, outside, depth, steps FAQ What is the measuring accuracy of this caliper? The Digital caliper 200 mm from Metav IndustryLine has an accuracy of approximately ±0.03 mm for the 0–200 mm range, in line with DIN 862 for digital calipers. Can the caliper be used in a wet environment or with coolant exposure? Yes, the instrument is rated IP67, so the digital caliper withstands dust ingress and temporary immersion, making it suitable for use where coolant or splash‑back may occur. Which measurements can be performed with the caliper? The caliper supports four‑way measurement: outside, inside, depth and step measurements, enabling versatile use across common workshop tasks. Is the display easy to operate and switch between units? The digital display includes MODE and SET buttons for rapid switching of units and zeroing, designed for efficient operation during repetitive inspection work. What is the product SKU and which brand supplies it? The product is supplied by Metav IndustryLine and is listed as SKU M216.152.N for ordering and inventory purposes. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200mm Digital Precision Caliper 0.01mm Resolution 50mm Depth Gauge, 0.03mm Accuracy - TECWERK
Combine fine measurement with practical workshop features: the 200 mm range, 0.01 mm resolution and square depth gauge deliver dependable inspection results; order the caliper directly via Metav Werkzeuge or consult our specialists for application advice. TECWERK Precision Caliper DIN 862, 200 mm digital with square depth gauge — 0.01 mm resolution A TECWERK Precision Caliper for standardised linear and depth measurement in workshops and inspection environments, compliant with DIN 862 200 mm measuring range, DIN 862 compliant 0.01 mm resolution for fine readings 0.03 mm accuracy for reliable inspection Square depth gauge and 50 mm jaw length Precision that speeds up inspection and decision-making The TECWERK Precision Caliper combines a 200 mm measuring range with 0.01 mm resolution and a specified 0.03 mm accuracy to support consistent quality checks. Resolution describes the smallest increment shown on the digital readout, while accuracy defines the maximum deviation from the true value; together these figures translate into clear limits for pass/fail decisions on the shop floor. Conformity to DIN 862 ensures measurements are comparable across tools and suppliers, making the instrument suitable for both incoming inspection and in-process sampling. Practical geometry for faster measuring cycles A 50 mm jaw length improves access to larger profiles and provides stable contact on outside dimensions, reducing the need for repeated repositioning. The square depth gauge is designed for reliable depth measurement in slots, recesses and stepped features, avoiding common measuring uncertainties. The digital readout offers immediate numerical values, which reduces interpretation time compared with vernier scales and helps maintain throughput in production and maintenance routines. More reliable processes, fewer reworks Repeatable, traceable readings from this digital caliper contribute directly to process efficiency: shorter inspection times, fewer measurement disputes and more predictable product quality. The mix of precise mechanics and electronic indication supports documented checks for internal audits and supplier control. For customers requiring additional technical information or integration support, detailed datasheets and application advice are available to ensure the instrument fits existing measurement routines. For dependable workshop measurement and consistent inspection results, choose the TECWERK caliper and contact Metav Werkzeuge in Emmerich for tailored advice or to arrange supply: info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: 2000851058NW Product type: Precision caliper Manufacturer: TECWERK Standard: DIN 862 Packaging unit: 1 Core technical data Measuring range: 200 mm Resolution: 0.01 mm Accuracy: 0.03 mm Jaw length: 50 mm Special features Digital measurement Square depth gauge (addition) Addition: square depth gauge UID: 2000851058NW FAQ What is the measuring range of the caliper? The measuring range is 200 mm, as specified for the TECWERK precision caliper (SKU 2000851058NW). How fine are the readings and how accurate are they? Readings are shown at 0.01 mm resolution, with a rated accuracy of 0.03 mm, enabling reliable inspection-level measurements. What does DIN 862 compliance mean for everyday use? Compliance with DIN 862 means the caliper meets established dimensional and functional standards for workshop calipers, ensuring comparability and consistent measuring practice. When is the square depth gauge useful? The square depth gauge is intended for depth measurements in slots, recesses and stepped features where a flat, square contact gives more stable results than small round probes. Is the instrument suitable for production-line sampling? Yes. The combination of digital indication, defined resolution and repeatable contact geometry supports fast sampling and consistent documentation for routine quality checks. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
200mm Digital Precision Caliper Absolute 0.01mm Resolution With TIN Coating, ABS System, Four‑Function Measurement, Supplied In Case - Metav IndustryLine
Combine precise 0.01 mm resolution with a TiN-coated, hardened stainless steel build and the ABS absolute measuring system to ensure repeatable workshop measurements and long service life; order the digital caliper directly via Metav Werkzeuge or ask our consultants if needed. M216.246.N Digital caliper — 200 mm, TiN-coated, ABS absolute system (Metav IndustryLine) The M216.246.N Digital caliper is a 200 mm precision workshop instrument for internal, external, depth and step measurements in metalworking and quality control. 0.01 mm resolution on a clear digital display TiN-coated stainless steel for wear resistance Absolute ABS system with Origin and Zero functions Data output RB 5 for integration into systems Accurate measurement for dependable process control A resolution of 0.01 mm and a clear digital readout provide the measurable accuracy required for everyday production and inspection tasks. The caliper's measuring range classifies it as a standard workshop caliper (up to 300 mm), which balances reach and stiffness for typical machine‑shop work. The ABS absolute system maintains the zero reference after battery changes, reducing setup time and avoiding cumulative errors; this rational advantage accelerates throughput and supports consistent quality checks. Robust construction that reduces downtime Manufactured from hardened stainless steel with a TiN coating on contact surfaces and a glass slide on the scale, the instrument is built to withstand regular workshop use while retaining smooth movement and long wear life. The corrosion-resistant materials and hard coating extend service intervals and preserve measurement integrity under industrial conditions. Because the mechanical design is compact and balanced, handling remains precise even during repeated single‑hand measurements, lowering the risk of user‑induced variance. Versatile measurement functions for practical workflows Equipped for four measurement functions — external, internal, depth and step readings — the caliper covers the most common measuring tasks without tool changes. The jaw geometry (jaw length 50/24 mm) and the absolute measurement mode support quick checks on components, fixtures and housings. The ORIGIN, UNIT, ON/OFF and 0/ABS keys on the display simplify mode changes and conversions between millimetres and inches (0.0005 in resolution), improving convenience and reducing cycle time in mixed‑unit environments. Digital integration and shop-floor efficiency The caliper includes RB 5 data output for digital transfer of measurement values to appropriate data loggers or process systems, enabling traceable records and integration into quality workflows. The low‑power 3 V absolute system cuts battery handling and, together with the simple zeroing function, supports uninterrupted measurement runs. The device's conformity to DIN 862 ensures familiar operation and acceptance in standard inspection routines, making it straightforward to integrate into existing metrology setups. For precise, robust 200 mm measuring capability from Metav IndustryLine, contact Metav Werkzeuge in Emmerich to arrange supply or technical advice on integrating the caliper into production workflows. Technical data Article number: M216.246.N GTIN: 4054469160054 Tariff code: 90173000 Standard: DIN 862 Category: Digital caliper Facts Measuring range: 0–200 mm Resolution: 0.01 mm / 0.0005 in Weight: 0.5 kg Battery: 3 V (absolute system) Data output: RB 5 Special features Material: hardened stainless steel, scale with glass slide Coating: TiN-coated contact surfaces Measurement functions: external, internal, depth, step Display functions: ORIGIN, UNIT, ON/OFF, 0/ABS Jaw length: 50/24 mm Usable with or without drive roller Digital readout, workshop class standard FAQ Is the caliper suitable for workshop quality control? The M216.246.N digital caliper is designed to the DIN 862 workshop standard and offers 0.01 mm resolution, making it well suited for routine quality control and inspection tasks. Which measurement functions are available on this instrument? This instrument supports four functions: external, internal, depth and step measurements, enabling diverse checks without swapping tools. What does the RB 5 data output provide? The caliper's RB 5 output allows numerical values to be transmitted to compatible data acquisition systems for documentation and process integration. How does the ABS system benefit daily use? The ABS absolute system preserves the zero reference after battery changes and provides immediate, reliable readings without re‑homing, which reduces setup time in continuous inspection operations. Can the caliper handle demanding shop environments? With a hardened stainless steel construction and TiN-coated measuring surfaces, the caliper resists wear and corrosion typical of industrial use while maintaining smooth operation. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200mm Digital Precision Caliper Absolute System, Removable Roller, IP54 - Metav IndustryLine
Benefit from the combination of an absolute measuring system, IP54 protection and a removable drive roller to ensure fast, reproducible workshop measurements; order the caliper via Metav Werkzeuge or consult our advisors for specification matching. Digital caliper 200 mm – Absolute system, IP54, removable roller (Metav IndustryLine) The Digital caliper 200 mm – Absolute system, IP54, removable roller is a robust workshop instrument designed for routine quality control and machining tasks, offering an absolute positioning system and a detachable drive roller for flexible operation. Absolute measuring system, no re-zeroing IP54 protection against dust and splashes Removable drive roller for flexible feeding Resolution 0.01 mm with quick inch/mm switching Reliable, traceable readings through absolute positioning The instrument uses an absolute measuring system, which preserves the reference even after switching off, eliminating the need to re-zero before every run. With a resolution of 0.01 mm (0.0005 in) and a digital readout featuring ON/OFF, 0/ABS, mm/inch and ORIGIN functions, the device provides precise numeric feedback that reduces manual interpretation errors. This translates into shorter cycle times in inspection routines and fewer corrective actions on the shop floor, supporting efficient production control without complex setup. Durable construction built for daily industrial use Constructed from stainless hardened steel with a glass scale, the caliper resists wear and retains mechanical stiffness across its 0–200 mm measuring range—classified as a standard length ideal for everyday machining and metalwork. An IP54 rating protects the electronics against dust ingress and water splashes, making the tool suitable for workshop environments where coolant mist or particulate is present. The detachable drive roller adds practical resilience: it enables operation with or without roller feed and simplifies maintenance without compromising measurement repeatability. Flexible measurement modes and data transfer for quality workflows Equipped for the full set of measuring tasks, the caliper supports four measurement modes—external, internal, depth and step—so a single instrument covers common inspection requirements. The display’s intuitive controls allow rapid toggling between millimetres and inches and instant recall of zero or origin points. For automated data capture, the unit provides a RB 6 data output, facilitating connection to data loggers or inspection software and reducing transcription errors during lot documentation. These capabilities aid traceable quality records and smoother integration into digital workflows. Proven partner reliability and workshop-level precision As part of the Metav IndustryLine, the instrument benefits from a supplier ethos that prioritises accessibility and consistency: Metav supplies a broad range of precision tools and acts as a quality filter for the European market. The compact 200 mm format offers the best compromise between reach and stiffness for general mechanical and metalworking applications, keeping handling straightforward while delivering dependable repeatability. Metav’s long-standing customer base and extensive product range underline the practical value of choosing proven metrology equipment for daily operations. Contact Metav Werkzeuge for advice on integrating the Metav IndustryLine digital caliper M216.226 into existing inspection routines and to arrange purchase or tailored delivery from Emmerich Technical data Article number: M216.226 GTIN: 4054469158297 Category: Calipers Manufacturer: Metav IndustryLine Facts Measuring range: 0–200 mm Resolution: 0.01 mm / 0.0005 in Weight: 0.4 kg Protection class: IP54 Special features Material: stainless hardened steel, scale with glass rail Measuring system: Absolute (3 V) Display: ON/OFF, 0/ABS, mm/inch, ORIGIN Data output: RB 6 Removable drive roller for use with or without roller feed Four measurement modes: external, internal, depth, step Delivery: transport case included FAQ What accuracy can be expected from this caliper? The caliper delivers a resolution of 0.01 mm; combined with the absolute measuring system, the instrument from Metav IndustryLine (SKU M216.226) provides stable, repeatable readings suited to standard workshop tolerances. Does IP54 mean the caliper is suitable for coolant-prone environments? IP54 indicates protection against dust ingress and splashing water; the Metav IndustryLine caliper is therefore appropriate for environments with occasional coolant mist or light splashing, though it is not intended for full immersion. Why is the removable drive roller useful? The detachable drive roller allows operation with or without roller feeding, improving adaptability on conveyor or fixture setups and simplifying maintenance for the Metav IndustryLine digital caliper. Can measurement data be exported electronically? Yes. The caliper includes an RB 6 data output, enabling direct capture of readings into compatible loggers or inspection systems to streamline documentation. Which measurement tasks does the caliper cover? The instrument supports external, internal, depth and step measurements, covering the four common measuring functions required in routine mechanical and quality-control work. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200mm Digital Precision Caliper Extra Thin Jaws 0.01mm Resolution 4‑Function Output, Stainless Steel Case - Metav IndustryLine
Take advantage of precise 0.01 mm resolution and a compact 200 mm measuring range to speed up inspection and reduce rework. The combination of slim jaws, robust stainless‑steel construction and an RB 5 data output ensures reliable measurements and seamless data transfer — order the item directly via Metav Werkzeuge or consult our technical team for specification matching. Digital caliper M240.015.N — 200 mm, extra‑thin jaws, 3 V system (Metav IndustryLine) The Digital caliper M240.015.N is a compact, workshop‑grade measuring tool designed for general machine‑shop control and fine component inspection, offering a slim‑jaw design for restricted features and a clear digital display for rapid readings 0.01 mm resolution digital display ±0.03 mm measurement accuracy Extra‑thin jaws for confined features RB 5 data output for traceable transfer Faster, traceable readings that support production control With a resolution of 0.01 mm and a stated accuracy of ±0.03 mm, this instrument delivers the repeatable readings required for routine quality control and set‑up tasks. The numeric resolution means values appear to two decimal places in millimetres (0.01 mm), while the accuracy figure indicates the expected measurement deviation under normal conditions; together these specifications help reduce rejects and shorten inspection loops. The integrated RB 5 data output supports direct transfer of measurements to data loggers or SPC systems, enabling automated documentation and easier process verification. Slim jaws and clear display for confined and complex measurements The caliper’s extra‑thin jaws (50 mm jaw length) allow access into narrow bores and tight part features without sacrificing contact stability. The instrument supports the four standard measuring functions — internal, external, depth and step measurements — so one device covers typical workshop tasks. The digital module is equipped with ON/OFF, ZERO, UNIT and HOLD keys for straightforward operation and temporary value lock; the 3 V power system keeps the electronics compact and energy efficient. Ergonomic balance and a low profile make handling comfortable during repetitive checks, which improves throughput and reduces operator fatigue. Built for everyday workshop use and broad material applications Constructed from hardened stainless steel with a metal housing, the caliper is designed to withstand shopfloor handling while maintaining jaw geometry. The 0–200 mm measuring range places this instrument in the Standard class for calipers, a versatile size that balances reach and stiffness for general metalworking and fixture inspection. At approximately 0.46 kg, the unit remains portable yet stable in use. The device is supplied to factory standard (Werksnorm) and provides the core feature set required for traceable, repeatable measurements in production and quality‑control environments. Contact Metav Werkzeuge for a tailored quotation or technical advice on integrating the M240.015.N into production and inspection workflows — our Emmerich‑based team will guide specification and delivery options Technical data Article number: M240.015.N GTIN: 4054469160290 Customs tariff number: 90173000 Facts Measuring range: 0–200 mm Resolution: 0.01 mm (0.0005 in) Stated accuracy: ±0.03 mm Weight: 0.46 kg Jaw length: 50 mm Power supply: 3 V Data output: RB 5 Special features Digital display with ON/OFF, ZERO, UNIT, HOLD Four measurement modes: internal, external, depth, step Hardened stainless‑steel construction with metal housing Factory standard (Werksnorm) Compact design for confined measurements FAQ What resolution and accuracy does the caliper offer? The caliper provides a resolution of 0.01 mm and a stated accuracy of ±0.03 mm, which is suitable for standard workshop quality control and set‑up verification with repeatable results. Which measuring tasks can this instrument perform? The device supports internal, external, depth and step measurements, allowing the caliper to cover the common measurement needs encountered in machine shops and inspection benches. Is the M240.015.N suitable for tight or narrow features? Yes — the extra‑thin jaws (50 mm length) are designed to access confined bores and narrow part details while maintaining stable contact for reliable readings. Can measurement data be exported for documentation? Yes — the caliper is fitted with an RB 5 data output to enable transfer of measurements to data loggers or SPC systems for traceability and automated documentation. Is the instrument supplied calibrated to an accredited standard? The tool is delivered according to the manufacturer’s factory standard (Werksnorm). It is not supplied with an ISO 17025 calibration certificate unless this is specified separately at the time of order. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200mm Digital Precision Caliper With 5 Pairs Of Measuring Inserts And 30mm Setting Ring, Hardened Stainless Steel – Metav IndustryLine
Compact, durable digital caliper with 0.01 mm readability and a 0–200 mm range, supplied with five pairs of specialised measuring inserts and a 30 mm setting ring; delivered in a transport case for safe handling. Combine accuracy, versatility and robust construction for consistent workshop metrology — order directly via Metav Werkzeuge or consult our specialists for application advice. Digital Universal Caliper 200 mm — Digital Caliper with 5 Insert Pairs and 30 mm Setting Ring (Metav IndustryLine) Digital Universal Caliper 200 mm with five pairs of measuring inserts and a 30 mm setting ring, designed for workshop and production measurement tasks Digital display with ON/OFF and SET/PRESET Hardened stainless steel construction Includes 5 pairs of measuring inserts 30 mm setting ring included Supplied in transport case Consistent, verifiable measurements for daily use The digital display with 0.01 mm readability delivers clear numerical results and reduces reading errors compared with analogue scales. The instrument’s electromechanical system provides rapid, repeatable readings that suit batch inspection and assembly tasks. Built from hardened stainless steel, the body resists wear and remains stable under frequent use, which preserves calibration and reduces downtime for replacements. The caliper’s 200 mm measuring range places it in the Standard class for machine‑shop metrology, offering a balance of reach and rigidity for typical components such as shafts, housings and mounting faces. Versatile measuring options with application‑specific inserts Supplied as a set, the tool includes five pairs of measuring inserts and a 30 mm setting ring that expand its functionality beyond plain external measurement. The insert pairs comprise flat and round groove probes, a dedicated external-contact insert, an M2.5 thread reference insert and a probe for tube‑wall or bore‑diameter checks. These accessories enable accurate internal, external, groove and bore measurements without improvised workarounds, so complex geometries can be measured directly and reproducibly. The practical accessory range reduces the need for multiple gauges and speeds up inspection cycles. Designed for workshop efficiency and safe transport Ergonomic jaw geometry and a positive locking slide make single‑handed operation straightforward while maintaining measuring force control. The tool is supplied in a transport case to protect precision faces and inserts during storage and movement between workstations. Its total weight of 1.25 kg reflects solid construction without compromising manoeuvrability. The combination of durable materials, intuitive controls (ON/OFF and SET/PRESET) and a compact case supports a reliable measurement workflow in busy production environments while simplifying handling and inventory management. For tailored advice or to purchase the Metav IndustryLine digital caliper with comprehensive insert set, contact Metav Werkzeuge for application guidance and order support. Technical Data Article number: M240.280 SKU: M240.280 GTIN: 4061905053788 Facts Measuring range: 0–200 mm Resolution / readability: 0.01 mm Weight: 1.25 kg Special features Material: hardened stainless steel Display: digital with ON/OFF and SET/PRESET Included accessories: 5 pairs of measuring inserts; 30 mm setting ring; transport case Suitable for: internal, external, tube wall and bore diameter measurement Delivered in a transport case FAQ What measurement tasks is this caliper suited for? The Digital Universal Caliper 200 mm is suitable for internal and external measurements, groove and bore checks, and tube‑wall thickness measurement thanks to its dedicated insert set. How precise is the instrument for workshop inspection? The instrument provides a readability of 0.01 mm, offering industry‑standard precision for routine quality control and assembly verification tasks. Which accessories are included with the caliper? The set includes five pairs of measuring inserts (flat and round groove, external contact, M2.5 thread reference, bore/tube probe) and a 30 mm setting ring, all supplied in a transport case. Is the caliper robust enough for frequent use in production? Yes. Constructed from hardened stainless steel and supplied in a protective case, the caliper is designed for durable, repeatable performance in workshop and production settings. Does the kit support specialised thread and groove measurements? Specialised inserts for groove profiles and an M2.5 thread insert are included, enabling direct measurement of these features without improvised tool adaptation. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200mm Digital Precision Caliper With ABS, Large LCD, mm/inch, USB Data Output - Filetta
Combine the 0–200 mm measuring range, 0.01 mm resolution and USB data transfer for consistent, repeatable quality control in the workshop; order the caliper directly via Metav Werkzeuge or consult their advisors for application support. Digital caliper M909.444 — 0–200 mm, 0.01 mm resolution (Filetta) The Digital caliper M909.444 is a workshop-ready precision measuring instrument for general machine‑shop and inspection tasks, offering fast digital readout and secure data export for traceable measurements. 0–200 mm measurement range 0.01 mm digital resolution Large LCD for fast readout USB data output for traceability Locking screw and depth probe Precision and repeatability for daily inspection routines Equipped with an ABS absolute system and a 0.01 mm display step, this caliper delivers the kind of reproducible readings that reduce rework and speed up quality checks. The combination of absolute measurement and an easy-to-read large LCD display means measurements remain stable after power cycles and are simple to verify at a glance. Compliance with DIN 862 places the instrument within recognised metrology practice, so measurements can be reliably used for standard workshop documentation and incoming inspection. Reliable data capture to simplify traceability The integrated USB output enables direct data transfer to a PC or data-logging system, eliminating manual transcription and the errors that follow. The digital interface, coupled with on/off, mm/inch and reset controls, speeds up reporting and supports digital quality workflows. For production environments where documentation matters, the ability to export readings directly from the instrument improves throughput and auditability. Practical design for everyday handling A locking screw secures the slider for repeatable setups while the built-in depth measurement rod and jaw length 50 mm provide practical versatility for depth, inside and outside measurements. The instrument’s construction with the ABS measurement principle ensures a clear reference point and stable zeroing. Battery power is supplied by a single CR2025, keeping maintenance simple and predictable for workshop use. Where this caliper fits in your tooling kit With a measuring range of 0–200 mm, the device belongs to the standard category of calipers that balance reach and stiffness for general machine‑ and metalworking applications. It is suited to bench inspection, process control and assembly checks where a straightforward, robust digital caliper supports efficient operation without the complexity of high‑end laboratory instruments. For dependable workshop measurement choose the Filetta digital caliper with 0–200 mm range — contact Metav Werkzeuge in Emmerich for tailored advice and swift supply via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M909.444 GTIN: 4061905448867 Brand: Filetta Standard: DIN 862 eCl@ss: 21170344 Facts Measuring range: 0–200 mm Resolution: 0.01 mm Jaw length: 50 mm Power supply: 1 × CR2025 Display: Large LCD Data output: USB Digital: yes Special features ABS absolute measuring system mm/inch with on/off and reset functions Depth measurement function Locking screw for repeatability Classified as Standard range caliper (up to 100–300 mm) FAQ What battery does the caliper use and how long does it typically last? The Filetta digital caliper M909.444 runs on one CR2025 battery; typical service life depends on usage and display time but the single-cell design keeps replacement straightforward. Can measurements be exported directly to a PC? Yes — the caliper provides a USB output, allowing readings from the Filetta digital caliper M909.444 to be transferred for logging or inspection records. How accurate is this digital caliper for workshop use? With a 0.01 mm resolution and compliance with DIN 862, the instrument meets standard digital caliper accuracy expectations; typical error bounds for standard digital calipers are in line with industry practice for this class. Which measurement functions does the instrument support? The caliper handles outside, inside and depth measurements and includes a locking screw for setting repeatable positions during checks. Is the caliper suitable for routine production inspections? Yes — the combination of absolute measurement, clear display and USB data transfer makes the Filetta digital caliper M909.444 well suited to regular inspection tasks in production and workshop environments. Manufacturer / Responsible: Schut Geometrische Meettechniek bv; Duinkerkenstraat 21; 9723 BN Groningen; The Netherlands; +31 50 5877877; schutnl@schut.com
200mm Digital Precision Caliper With Depth Rod, 0.01mm Resolution, Locking Screw, Battery CR2032 – Filetta
The compact, battery‑powered caliper delivers a 0–200 mm measuring range with 0.01 mm display resolution and an overall accuracy of ±0.03 mm, making it a reliable choice for routine quality checks and workshop tasks. Benefit from stable handling via the thumbwheel and locking screw, plus clear mm/inch readout and depth measurement capability. Order the instrument directly via Metav Werkzeuge or consult our specialists for procurement and application advice. Digital Caliper MS910.465 — 0–200 mm, 0.01 mm resolution (Filetta) The Digital Caliper MS910.465 is a compact precision measuring instrument designed for standard workshop and quality‑control applications across machining and metalworking environments. Digital mm/inch display with reset and on/off 0–200 mm measuring range for standard workshop use 0.01 mm resolution with ±0.03 mm accuracy Depth gauge, thumbwheel and locking screw Engineered for reliable workshop measurement Built to support dependable dimension control, this precision instrument combines a practical 0–200 mm reach with a fine 0.01 mm display step and an accuracy of ±0.03 mm. The numerical specifications indicate how closely a reading can be expected to match the true value and how finely the device reports changes; the result is a tool that suits routine inspection, setup and first‑article checks where reproducible results are required. Classified as Standard class by measuring range, it strikes the balance between reach, stiffness and one‑hand handling that workshops typically need. Effortless handling for repeated measurements Ergonomics have been considered: the integrated thumbwheel enables smooth, controlled sliding for one‑hand operation, while the locking screw secures the jaw position for stable readings during transfer or marking. The instrument features a clear digital display with a quick mm/inch toggle, plus a Reset function to set reference points. A depth gauge extends the caliper’s usefulness for basic depth checks. All of these handling aids reduce operator influence on results and speed up common measuring sequences on the shop floor. Adapted to common machining and inspection tasks The caliper is aimed at everyday applications in general machining and metalworking, where fast, comparable measurements are needed for components such as shafts, housings and small assemblies. Thanks to its 0–200 mm span it covers the most frequently required sizes without sacrificing rigidity, making it appropriate for production support, maintenance and incoming inspection. The combination of resolution and usable reach provides an efficient alternative to repeatedly using smaller instruments or switching gauges for mid‑sized parts. Clear readout and straightforward maintenance Readability and upkeep are simple: the display increments of 0.01 mm mean that small step changes are clearly shown, while the stated ±0.03 mm accuracy describes the expected deviation under normal use. Power is supplied by a 1x CR2032 cell, and basic cleaning of the slide and jaws with a lint‑free cloth keeps the mechanism operating smoothly. As the product data does not state a supplied calibration certificate, requests for official calibration documentation can be clarified prior to purchase. Discuss Filetta’s MS910.465 with Metav Werkzeuge for tailored supply from Emmerich — phone +49 2822 7131930 or e‑mail info@metav-werkzeuge.com Technical Data Article number: MS910.465 Manufacturer: Filetta Product type: Digital caliper Measuring range: 0–200 mm Display resolution: 0.01 mm Accuracy: 0.03 mm Power supply: 1x CR2032 Display functions: mm/inch, On/Off, Reset Jaw length: 50 mm Thumbwheel drive: yes Locking screw: yes Depth gauge: yes Facts Measuring range (min–max): 0–200 mm Display increment: 0.01 mm Specified accuracy: 0.03 mm Jaw length: 50 mm Special features Digital mm/inch readout with reset and power control Thumbwheel for precise, one‑hand adjustment Locking screw for fixed measurements Integrated depth measurement function Powered by CR2032 cell FAQ What display resolution and accuracy does the instrument provide? The instrument offers a display resolution of 0.01 mm and a stated accuracy of ±0.03 mm, which defines the typical deviation to expect in normal measuring conditions. Which measuring range is covered and how is it classified? The caliper covers 0–200 mm and falls into the Standard measuring‑range class, a common choice for general machine‑shop and inspection tasks. Does the tool include depth measurement and a locking mechanism? Yes — the caliper has an integrated depth gauge and a locking screw to secure the jaw position for stable readings. What power source is required? Power is supplied by a single CR2032 cell; the product data specifies the battery type but does not indicate battery inclusion. Is a calibration certificate supplied with the caliper? The available product information does not state that a calibration certificate is supplied with the caliper Manufacturer / Responsible: Schut Geometrische Meettechniek bv; Duinkerkenstraat 21; 9723 BN Groningen; The Netherlands; +31 50 5877877; schutnl@schut.com
200mm Digital Taschen-Messschieber mit Solarzelle, 0,01mm - Metav IndustryLine
Die überragenden Bewertungen von Metav Werkzeuge stehen für 42.000 zufriedene Kunden. Überzeuge Dich selbst und bestelle bei metav-shop.de! Das wichtigste für den Taschen-Messschieber von Metav IndustryLine mit Solarzelle Messbereich: bis 200mm Ablesung: 0,01mm Material: rostfreier Stahl Ausführung: digital Routinen stärken mit 200mm Mit 0 – 200mm bleibt der Zugriff auf häufige Werkstückdimensionen jederzeit möglich. Kanten, Aussparungen und Flächen lassen sich mühelos erfassen, ohne den Ablauf zu unterbrechen. Der Bereich unterstützt Routinen im Maschinen- und Metallbau und hält Reserven für unterschiedliche Geometrien bereit. Gleichmäßige Messabläufe sparen Zeit und schaffen Verlässlichkeit. So entsteht ein stimmiges Verhältnis aus Reichweite und Präzision. Schauen Sie hier, wie wir die Messbereiche klassifiziert haben. Klassifizierung Messbereiche beim Messschieber.. Vier verschiedene Messarten Dieses Messwerkzeug eignet sich für die so genannte 4-fach Messung, das heisst es können einfach Aussen-, Innen-, Tiefen und Stufenmessungen durchgeführt werden. Das sind die vier Mess-Modi: Außenmessung: Außendurchmesser, Breite, Dicke von Werkstücken mit den großen Messschnäbeln Innenmessung: Innendurchmesser von Bohrungen, Nuten, Rohren – gemessen mit den oberen, kleineren Kreuzschnäbeln Tiefenmessung: Tiefe von Sacklöchern, Nuten oder Abständen bis zu einer Grundfläche – mittels ausfahrender Tiefenmessstange am Schieberende Stufen- oder Absatzmessung: Höhe bzw. Versatz zwischen zwei Ebenen (Absatz an Dreh-/Frästeilen, Bundhöhe, Schrittmaß an Gehäusen) – gemessen über die rechtwinklig geschliffenen Stirnseiten von Schiene und Schieber Fachhinweis: Wie stelle ich planparallelen Kontakt sicher? Messschenkel müssen vollständig anliegen; kippt der Schieber, entsteht ein systematischer Kippfehler. Bei Innenmessungen zusätzlich prüfen, ob beide Kreuzschnäbel anliegen. Ausführungsdetails zumdigitalen Taschen-Messschieber von Metav IndustryLine: Marke: Metav IndustryLine Bezeichnung: Taschen-Messschieber Bestellnummer: M216.192 Zahlen & Fakten: Messbereich: 0-200mm Gewicht: 0,35kg Schnabellänge: 50/21mm Ablesung: 0,01mm Ablesung in Inch/Zoll: 0,0005 für 4-fach Messung Ausführungen Ausführung: digital Material: rostfreier Stahl Lieferung im Kasten Anzeige: mit mm/inch-, ZERO- und ON/OFF-Taste mit Solarzelle Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com Worauf Käufer eines Messschiebers achten sollten: Neben den zentralen Faktoren Genauigkeit und Messbereich gewinnen auch komplette Funktionen wie der Datenausgang oder die Überwachung der Messkraft zunehmend an Bedeutung. Das Arbeiten mit einem Messschieber, der eine exakt eingestellte Messkraft aufweist, ist in der Qualitätssicherung und bei Labortätigkeiten von großem Nutzen. Daneben ist wichtig zu prüfen, ob ein kalibrierter Messschieber benötigt wird. Die Möglichkeit zur Kalibrierung besteht unmittelbar bei Entgegennahme; zur Sicherstellung der Prozessstabilität sollte regelmäßig jährlich neu kalibriert werden.
200mm Digitaler Messschieber mit 0,005mm Auflösung, Force Control, Touchscreen, ISO17025 Kalibrierzertifikat - Microtech Metrology
Caliper with Force Control and Microcomputer by Microtech Metrology The Caliper with Force Control and Microcomputer is a precision digital caliper designed for reproducible measurements up to 200 mm, combining E‑Force measurement control, a colour touchscreen and wireless data transfer for modern workshops and quality labs. Industry 4.0-ready with computerized MICS system E‑Force measurement control, 1–20 N with AUTO mode Wireless + USB data output to MDS app and HID modes Resolution selectable down to 5 µm for fine work Stainless steel body with upper and lower carbide jaws Accuracy and traceability that support production control The Caliper with Force Control and Microcomputer delivers repeatable readings thanks to a selectable resolution of 0.005 mm and a hand‑finished Stainless Steel measuring surface with Ra < 0.32 µm. Included is a Calibration Certificate (ISO17025 / Ilac MRA), which documents traceability for incoming and outgoing inspection. These elements together mean fewer remeasures and clearer evidence in quality audits. Consistent contact pressure for reliable thickness and depth readings An integrated E‑Force control module lets the operator set the measuring force between 1 and 20 N, or use the AUTO‑Force option when consistency is required across many parts. The instrument records values only when the preset measuring force is reached, so operator‑dependent variation is minimised. For materials sensitive to deformation, a lower measuring force preserves the sample while still providing an accurate result. Seamless digital workflows and Industry 4.0 connectivity Equipped with the computerized MICS system and a hi‑res colour touchscreen, this caliper supports modern data flows: wireless transfer to the MDS app (Windows, Android, iOS, MacOS), Wireless HID modes, and USB HID for direct entry into any application. Compared with the U‑WAVE Technologie von Mitutoyo, Microtech’s solution simplifies data transmission: only one dongle is required at the PC, and transfers to iPhone, iPad and Android devices can originate directly from the measuring tool. The built‑in memory manager stores up to 1000 values with statistics and facilitates later data export. Robust construction and practical design for varied workshop tasks Designed for daily use, the caliper features upper and lower carbide jaws, IP54 protection against dust and splash, and a rechargeable Li‑Pol battery (300 mAh) with USB‑C charging and data socket. The instrument’s measuring range 0–200 mm classifies it in the extended (>150–300 mm) category, offering the extra reach needed for assembly and maintenance while remaining compact enough for routine bench work. Useful functions explained simply Functions such as Go/NoGo, Max/Min, Formula, Timer, Linear and Temperature Correction are built into the software to support both simple checks and more complex measurement sequences. Resolution selection allows switching between 0.005, 0.01 and 0.1 mm depending on the task. The E‑Force status is shown by colour indication, helping operators verify correct setup at a glance. Strongly recommended: choose Microtech Metrology’s Caliper with Force Control and Microcomputer for demanding measurement tasks; for personalised advice or extra technical data contact METAV Werkzeuge — Email: info@metav-werkzeuge.com — Phone: +49 2822 7131930 — WhatsApp: +49 170 2837271 Technical specifications Caliper with Force Control and Microcomputer Brand: Microtech Metrology SKU: 141077020C Measuring range: 0–200 mm Resolution / Readout: 0.005 mm (selectable 0.005 / 0.01 / 0.1 mm) Measuring force: 1–20 N, AUTO‑Force mode, Force indication and colour feedback Data output: Wireless + USB (WIRELESS to MDS app; WIRELESS HID; WIRELESS HID+MAC; USB HID) Digital display: Colour 1.5" Touchscreen (hi‑res) Memory: 1000 values with folders and statistics, memory data transfer Functions: Go/NoGo, Max/Min, Formula, Timer, Linear error compensation, Temperature correction, Resolution selection, Connection indication, Peak, Limits, Preset Measuring faces: Hand finished Stainless Steel, Ra < 0.32 µm, Upper and Lower carbide jaws Battery: Rechargeable Li‑Pol 300 mAh, USB‑C charging/data socket Protection class: IP54 Calibration: ISO17025 (Ilac MRA) certificate included Patents: US10184772, UA174949, UA126928 Additional: E‑Force control module, AUTO‑Force, graphic and synchronized device functions, firmware update capable Manufacturer: MICROTECH Private Scientific Manufacturing Enterprise; 04080, Ukraine, Kyiv; Nizhneyurkovska str., 45a; tool@microtech.tools FAQ What measuring range does the Caliper with Force Control and Microcomputer from Microtech Metrology cover? The Microtech Metrology Caliper with Force Control and Microcomputer measures from 0 to 200 mm, placing it in the extended (>150–300 mm) category and offering extra reach while remaining practical for workshop and inspection tasks. How does the force control of the Microtech Metrology caliper work and why is it useful? The caliper’s E‑Force module lets the user set a measuring force between 1 and 20 N or use AUTO‑Force; the Microtech Metrology caliper records values only when the preset force is achieved, ensuring consistent contact pressure and reliable readings for delicate or deformable parts. Can I transfer measurement data directly to my phone or PC with the Caliper with Force Control and Microcomputer? Yes, the Microtech Metrology caliper supports wireless transfer to the MDS app on Windows, Android, iOS and MacOS, as well as Wireless HID modes and USB HID, enabling direct input into spreadsheets or measurement software without additional converters. Is the Microtech Metrology caliper certified and suitable for traceable inspection? The Microtech Metrology Caliper with Force Control and Microcomputer includes an ISO17025 (Ilac MRA) calibration certificate and is built with hand‑finished measuring faces and carbide jaws, making it suitable for traceable quality inspection and calibration‑backed measurements. Need help choosing or more technical details for the Microtech Metrology caliper? If unsure whether the Microtech Metrology Caliper with Force Control and Microcomputer meets specific requirements or if additional technical data is needed, METAV Werkzeuge provides expert advice — Email: info@metav-werkzeuge.com — Phone: +49 2822 7131930 — WhatsApp: +49 170 2837271
200mm Digitaler Messschieber, 0,005mm Auflösung, Force Control 1–20N, IP54, ISO17025 Kalibrierschein, Wireless+USB - Microtech Metrology
Caliper with Force Control and Microcomputer by Microtech Metrology The Caliper with Force Control and Microcomputer is a precision digital measuring instrument designed for workshop and production use, combining force‑controlled repeatability with Industry 4.0 connectivity for efficient quality control. DataMet E‑Force caliper with MICS system Force control 1–20 N with AUTO‑Force mode 5 µm selectable reading resolution Wireless and USB HID data transfer IP54 stainless steel construction and ISO17025 certificate Precision measurement with controlled force for repeatable results The instrument delivers repeatable measurements thanks to the integrated E‑Force control that allows manual Force selection from 1 to 20 N and an AUTO‑Force mode. By setting the desired measuring force, the caliper ensures that the same contact pressure is applied for each measurement; values are recorded only when the preset force is reached. This approach reduces variability on soft or coated parts and improves comparability between operators. The 5 µm selectable resolution supports fine engineering tolerances while keeping operation intuitive for workshop and inspection personnel. Modern connectivity for streamlined data workflows Equipped with the computerized MICS system and DataMet connectivity, the caliper offers multiple transfer modes including Wireless to MDS app (Windows, Android, iOS, MacOS), Wireless HID / HID+MAC, and USB HID. Compared to the U‑WAVE Technologie von Mitutoyo, Microtech’s data handling is simpler: only a single dongle is needed on the PC side, while transfers to iPhone, iPad and Android devices can be performed directly from the measuring instrument. The instrument’s memory holds up to 1000 values with folder structure and statistics, enabling offline data collection and later batch transfer. Durable construction and calibration confidence The caliper is manufactured from Stainless Steel with hand‑finished measuring surfaces (Ra < 0.32 µm) and an IP54 rating for splash and dust resistance in workshop environments. A rechargeable Li‑Pol 300 mAh battery with USB‑C charging/data socket ensures simple charging and connectivity. Each unit comes with an ISO17025 calibration certificate, offering traceability and assurance for laboratory and production acceptance. Who benefits and where to use it This caliper is aimed at quality engineers, maintenance staff and precision technicians who need a dependable portable instrument for component verification, assembly control and incoming inspection. The 0–200 mm measuring range covers the common standard tasks in mechanical workshops and production lines. For applications requiring consistent contact pressure and digital traceability — from prototypes to small series production — this instrument reduces rework and speeds up inspection routines. We recommend the Microtech Metrology DataMet E‑Force caliper for professionals seeking force‑controlled, connected measurements; for expert advice and personalised configuration contact METAV Werkzeuge — Email: info@metav-werkzeuge.com — Phone: +49 2822 7131930 — WhatsApp: +49 170 2837271 Caliper with Force Control and Microcomputer Brand: Microtech Metrology SKU: 141077020A Measuring Range: 0–200 mm Resolution / Readout: 0.005 mm (5 µm) with selectable 0.01 / 0.1 mm options Measuring Force: 1–20 N, AUTO‑Force mode, Force indication and color feedback Display: Color 1.54" Touchscreen (Hi‑res) Data Output: Wireless + USB (WIRELESS to MDS app, WIRELESS HID, WIRELESS HID+MAC, USB HID) Memory: 1000 values with folders and Statistics mode, Memory data transfer Surface Finish: Hand finished measuring surfaces Ra <0.32 µm Battery: Rechargeable Li‑Pol 300 mAh, USB‑C charging/data socket Protection Class: IP54 Certificate: Calibration Certificate ISO17025 (Ilac MRA) included Additional Functions: Go/NoGo, Max/Min, Formula, Timer, Linear correction, Temperature correction, Resolution select, Connection indication, E‑Force control module Material: Stainless Steel Availability: in Stock, Condition: new Manufacturer: MICROTECH Private Scientific Manufacturing Enterprise; 04080, Ukraine, Kyiv; Nizhneyurkovska str., 45a; tool@microtech.tools FAQ What makes the Caliper with Force Control and Microcomputer from Microtech Metrology different from other digital calipers? The Microtech Metrology Caliper with Force Control and Microcomputer integrates an E‑Force control that enforces a consistent measuring pressure (1–20 N) and records values only when the set force is reached, providing higher repeatability than standard calipers and simplifying inspection across operators. Can the Caliper with Force Control and Microcomputer send data directly to smartphones and PCs? Yes, the Microtech Metrology instrument supports Wireless transfer to the MDS app (Windows, Android, iOS, MacOS) as well as Wireless HID and USB HID modes; unlike the U‑WAVE Technologie von Mitutoyo, Microtech requires only a single PC dongle while mobile devices can receive data directly from the caliper. Is the Caliper with Force Control and Microcomputer suitable for workshop environments? The Microtech Metrology caliper is built for workshop use with Stainless Steel construction, hand‑finished jaws (Ra <0.32 µm), an IP54 protection rating and an ISO17025 calibration certificate, making it robust and traceable for regular production inspection tasks. How much data can the Caliper with Force Control and Microcomputer store and how is it exported? The caliper stores up to 1000 values with folders and a Statistics mode; stored data can be transferred via Wireless to the MDS app or exported as HID via Wireless or USB to any host application. Who can help if I need further technical information about the Caliper with Force Control and Microcomputer? METAV Werkzeuge provides comprehensive and competent advice for complex measuring tools — for specific requirements or additional technical data contact METAV Werkzeuge at info@metav-werkzeuge.com, call +49 2822 7131930 or message via WhatsApp +49 170 2837271.
200mm Digitaler Präzisionsmessschieber, 0,01mm Auflösung, Wireless, handgefertigte Messbacken, ISO 17025 Kalibriert - Microtech Metrology
Kompakte Präzision, sofort einsetzbare Dokumentation und nachweisbare Kalibrierung zeichnen diesen Präzisionsmessschieber aus. Die Kombination aus Wireless‑Datenausgang, ISO‑17025‑Kalibrierschein und handgefertigten Messbacken sorgt für reproduzierbare Ergebnisse und langfristige Verlässlichkeit. Bestellen Sie das Gerät direkt über Metav Werkzeuge oder fragen Sie unsere Beratung bei Bedarf an. Präzisionsmessschieber von Microtech Metrology Der Präzisionsmessschieber ist ein digitaler Messschieber für präzise Werkstatt‑ und Qualitätsmessungen mit Wireless‑Datenübertragung. Messbereich 0–200 mm: universelle Werkstattlänge Digitale Anzeige, Höhe 11 mm für klare Ablesung Wireless Datenausgang für einfache Dokumentation ISO‑17025 Kalibriert inkl. Kalibrierschein Handgefertigte Messbacken für langlebige Präzision Präzision und Messperformance für die Qualitätskontrolle Der Messschieber bietet eine Auflösung von 0,01 mm und erfüllt damit die Anforderungen an präzise Werkstattmessungen. Durch das ausgewogene Schenkelverhältnis in der Standardklasse ist die Steifigkeit gewährleistet, wodurch Messungen mit hoher Reproduzierbarkeit möglich sind. Anwender profitieren von konsistenten Ergebnissen bei Innen‑, Außen‑ und Tiefenmessungen, die die Fertigungsprüfung und die Dokumentation technischer Toleranzen vereinfachen. Robuste Konstruktion und einfache Ablesbarkeit Die Ausführung mit handgefertigten Messbacken erhöht die Standzeit und reduziert Einlaufspiel, was die Langzeitstabilität verbessert. Die digitale Anzeige mit 11 mm Höhe sorgt für schnelle und fehlerfreie Ablesung auch unter Werkstattbeleuchtung, während das schlanke Messschlitten‑Design Einhandbedienung und zügiges Arbeiten erlaubt. So wird aus einem präzisen Messinstrument ein praktisches Prüfmittel für den Tagesbetrieb. Standardklasse für Maschinenbau und Werkstatt Mit einem Messbereich von 0–200 mm gehört das Instrument zur Standard‑Klasse und deckt den typischen Alltagsbedarf im Maschinen‑ und Metallbau ab. Diese Längen bieten ein optimales Verhältnis aus Reichweite und Handhabung, weshalb der Schieber besonders für Werkstätten, Instandhaltung sowie die Serien‑ und Einzelteilprüfung geeignet ist. Die Kombination aus Reichweite und Bedienkomfort macht das Gerät zur universellen Werkstattbasis. Kalibrierung und digitale Integration für sichere Prozesse Das Messgerät wird nach ISO‑17025 ausgeliefert und enthält ein Kalibrierzeugnis, sodass Messwerte rückführbar und auditfähig sind. Der Wireless‑Datenausgang ermöglicht die einfache Übertragung von Messdaten in Prüfprotokolle oder Messdaten‑Managementsysteme, was manuelle Übertragungsfehler reduziert und die Dokumentation beschleunigt. Damit eignet sich das Instrument auch für Prüfplätze mit Anbindung an digitale Qualitätssicherung. Empfehlung: Den Microtech Metrology Präzisionsmessschieber mit ISO‑17025‑Kalibrierschein für verlässliche Qualitätskontrolle direkt über Metav Werkzeuge per E‑Mail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 anfragen. Produktmerkmale Artikelnummer: 141072292 GTIN: 4061905038310 Marke: Microtech Metrology Bezeichnung: Präzisionsmessschieber Fakten Messbereich: 0–200 mm Messbereich (max): 200 mm Messbereich (min): 0 mm Auflösung: 0,01 mm Displayhöhe: 11 mm Schnabellänge: 50/18 Besonderheiten Handgefertigte Messbacken Wireless Datenausgang ISO‑17025 Kalibrierschein: Kalibrierung nach Norm Digitale Anzeige: Digital Tiefenmaß FAQ Welche Messgenauigkeit bietet dieses Messgerät? Der Präzisionsmessschieber von Microtech Metrology erreicht eine Auflösung von 0,01 mm; in der Praxis entspricht dies dem geforderten Werkstattstandard für präzise Fertigungs‑ und Prüfaufgaben. Das Modell mit der Artikelnummer 141072292 eignet sich für wiederholgenaue Kontrollen in der Serienfertigung. Für welche Anwendungen ist der Schieber besonders geeignet? Der Schieber ist ideal für Maschinen‑ und Metallbau, Instandhaltung sowie Werkstattprüfungen. Das Gerät von Microtech Metrology (SKU 141072292) deckt mit seinem Messbereich die typischen Anforderungen an Bauteil‑ und Einbaumaße ab. Wie erfolgt die Datenübertragung und Dokumentation? Die Datenübertragung läuft über den integrierten Wireless‑Datenausgang, wodurch Messergebnisse direkt in Prüfprotokolle oder Messsoftware übertragen werden können. Dadurch reduziert der Präzisionsmessschieber manuelle Dokumentationsschritte. Wird das Messgerät kalibriert ausgeliefert? Ja. Der Präzisionsmessschieber wird nach ISO‑17025 ausgeliefert und enthält ein Kalibrierzeugnis, das die Rückführbarkeit und Auditfähigkeit der Messergebnisse dokumentiert. Hersteller: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine; tool@microtech.tools
200mm Digitaler Präzisionsmessschieber, 0,01mm, Digitale Anzeige 11mm, ISO 17025 Kalibrierung - Microtech Metrology
Der Präzisionsmessschieber vereint hohe Messgenauigkeit mit robuster Verarbeitung und praxisgerechter Digitalanzeige; die integrierte ISO 17025 Kalibrierung garantiert sofortige Einsatzfähigkeit in Prüfprozessen, und die handgefertigten Messbacken sorgen für reproduzierbare Ergebnisse bei Innen‑, Außen‑ und Tiefenmaßen. Präzisionsmessschieber von Microtech Metrology Präzisionsmessschieber mit Digitalanzeige, Standard‑Messbereich und feinmechanischer Ausführung für Werkstatt und Qualitätssicherung Digitalanzeige, Höhe 11 mm für klare Ablesung Messbereich 0–200 mm für universelle Werkstattaufgaben Handgefertigte Messbacken für hohe Reproduzierbarkeit Ablesung 0,01 mm für präzise Messwerte Lieferung kalibriert nach ISO 17025 mit Kalibrierzeugnis Präzision, die sich in der Produktion auszahlt Die Schieblehre bietet konstante Messgenauigkeit durch eine Auflösung von 0,01 mm, was den Einsatz in Fertigung und Kontrolle erleichtert. Anwender profitieren von schnellen, verlässlichen Messungen, die als Grundlage für Prozessentscheidungen dienen. Die klare Digitalanzeige mit 11 mm Höhe reduziert Ablesefehler und steigert die Effizienz bei wiederholten Messvorgängen. Robustheit und handwerkliche Fertigung für dauerhafte Nutzung Durch die handgefertigten Messbacken und die sorgfältige Ausführung bleiben Messkontakte über lange Zeit stabil, was Verschleiß und Nacharbeit reduziert. Die Bauweise ist auf Alltagsbeanspruchung in Werkstätten ausgelegt; dadurch sinkt die Notwendigkeit häufiger Nachkalibrierungen, und die Schieblehre bleibt auch unter rauen Bedingungen ein zuverlässiges Werkzeug. Passender Messbereich und Einordnung für den Werkstattalltag Mit einem Messbereich von 0–200 mm fällt dieses Modell in die Standardklasse für Maschinen‑ und Metallbau, die das beste Verhältnis aus Reichweite und Handhabbarkeit bietet. Für typische Werkstattaufgaben sind 150/200/300 mm die bevorzugten Längen, und dieses Gerät deckt damit die häufigsten Messaufgaben ab, ohne an Steifigkeit oder Bedienkomfort einzubüßen. Kalibrierung und Qualitätsnachweis für Prüfprozesse Die Lieferung erfolgt mit vollständiger Kalibrierung nach ISO 17025 und beinhaltet ein Kalibrierzeugnis, sodass der Messschieber sofort in Prüfabläufe integriert werden kann. Dieser Nachweis erleichtert die Dokumentation in internen Prüfberichten und beschleunigt Freigabeprozesse in der Qualitätssicherung. Einsatzbereiche und Zielgruppe Dieses Präzisionsinstrument richtet sich an Fachbetriebe, Feinmechaniker und Prüfstellen, die eine zuverlässige, digital ablesbare Schieblehre benötigen. Die Kombination aus präziser Auflösung, handwerklicher Backenfertigung und ISO‑Kalibrierung macht das Gerät zur geeigneten Wahl für Werkstätten und Labore, die wiederholbare Messergebnisse nachweisen müssen. Mit dem Microtech Metrology Präzisionsmessschieber und der mitgelieferten ISO 17025 Kalibrierung die Messqualität sichern — Direkte Bestellung und technische Beratung über Metav Werkzeuge per eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 Produktmerkmale Artikelnummer: 141072222C Marke: Microtech Metrology Bezeichnung: Präzisionsmessschieber GTIN: 4061905200588 Daten Messbereich: 0–200 mm Ablesung: 0,01 mm Digitalanzeige Höhe: 11 mm Schnabellänge: 50/18 mm Besonderheiten Handgefertigte Messbacken Tiefenmaß integriert Messflächen präzise ausgeführt Digitalanzeige mit hoher Lesbarkeit ISO 17025 Kalibrierung inklusive Kalibrierzeugnis FAQ Welche Genauigkeit kann ich von diesem Präzisionsmessschieber erwarten? Der Microtech Metrology Präzisionsmessschieber (SKU 141072222C) bietet eine Ablesung von 0,01 mm und ist damit für Standard‑Qualitätskontrollen im Maschinenbau geeignet. Ist der Messschieber sofort für Prüfungen verwendbar? Ja, der Präzisionsmessschieber wird mit einer vollständigen Kalibrierung nach ISO 17025 geliefert; das Kalibrierzeugnis liegt bei und ermöglicht die sofortige Einbindung in Prüfprozesse. Für welche Anwendungen eignet sich der Messbereich von 0–200 mm? Der Messbereich 0–200 mm macht die Schieblehre zur geeigneten Wahl für typische Werkstatt‑ und Fertigungsaufgaben im Maschinen‑ und Metallbau, wo Reichweite und Handhabbarkeit gleichermaßen wichtig sind. Welche Vorteile bieten die handgefertigten Messbacken? Handgefertigte Messbacken sorgen beim Microtech Metrology Präzisionsmessschieber für konsistente Kontaktgeometrie und damit für reproduzierbare Messergebnisse über lange Nutzungszeiträume. Ist das Gerät für Innen‑ und Tiefenmessungen geeignet? Ja, der Präzisionsmessschieber verfügt über ein integriertes Tiefenmaß und ist für Innen‑, Außen‑ und Tiefenmessungen in Werkstattumgebungen ausgelegt. Hersteller: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine; tool@microtech.tools
why digital calipers accelerate accurate measurement
A digital caliper is a precise length-measuring instrument that captures measurements electronically and shows them on an LCD display, making read‑out immediate and error‑free. Compared with analogue calipers it delivers higher accuracy, faster operation and the option to store or transfer measurements, which speeds up inspection and reduces rework. Metav supplies digital calipers from leading manufacturers, ready for industry, workshop and laboratory use.
how digital calipers are used in industrial settings
Digital calipers work by converting linear displacement into an electronic signal via a capacitive sensor, with a clear LCD display and a zero function at any position. Many models allow switching between mm/inch and provide data output for direct integration into measurement systems. Construction in stainless steel and optional protection ratings such as IP54 make them robust enough for shop‑floor tasks. Typical measuring ranges include 0–150 mm and 0–300 mm, covering most component inspection needs.
key performance benefits that improve your workflow
- Rapid, error‑free readings thanks to the LCD display and direct digital output, reducing inspection time.
- Consistent repeatability with a resolution commonly of 0.01 mm, which minimises corrective work.
- Flexible operation with zero at any position and quick conversion between mm/inch, speeding setup and measurement changes.
- Durable design (stainless steel housing, optional IP54) for low maintenance and long service life.
- Seamless data handling where data output is available, enabling faster documentation and process control.
metav industryline and chosen manufacturers as practical options
Metav IndustryLine provides precise, dependable measuring tools designed for everyday use in production and quality assurance. For users seeking cutting‑edge electronics and enhanced connectivity, Microtech offers innovative digital calipers with advanced data features; Filetta supplies robust, economical alternatives for routine workshop tasks. Metav combines its product range with local stock and expertise: more than 48,000 customers trust Metav, and the company offers over 250,000 products from its Emmerich location, acting as a quality filter for the european market.
concise summary
digital calipers deliver fast, repeatable and easily transferable measurements for metalworking, plastics and electronics, with common specifications such as 0.01 mm resolution, 0–150 mm / 0–300 mm ranges and data output options. Metav’s range, including Metav IndustryLine, Microtech and Filetta, covers both high‑precision and cost‑effective needs.
FAQ
what measuring range should i choose for digital calipers?
Choose the measuring range based on the largest dimension you need to check; common options are 0–150 mm for general components and 0–300 mm for larger parts. digital calipers with an appropriate range avoid unnecessary repositioning and speed up inspection.
how precise are digital calipers for repeat measurements?
Digital calipers typically offer a resolution of 0.01 mm and, with a capacitive sensor and solid construction, provide high repeatability suitable for quality control and assembly tasks.
can i connect digital calipers to a pc or measurement system?
Yes. Models with data output support direct transfer of measurements to a pc or data logger, simplifying traceability and statistical process control when used in inspection workflows.
are digital calipers suitable for workshop environments?
Many digital calipers feature a stainless steel housing and protection ratings such as IP54, making them durable enough for the workshop while remaining easy to maintain.
what is the difference between metav industryline, microtech and filetta calipers?
Metav IndustryLine focuses on reliable, well‑manufactured tools for everyday precision; Microtech targets advanced functionality and connectivity for demanding applications; Filetta provides robust, value‑oriented instruments for routine workshop use. Metav packages these choices with local stock and industry expertise from Emmerich.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com