Digital calipers for fast, reliable dimensional control
Digital calipers and precision calipers deliver fast, repeatable length measurements for metalworking, woodworking and electronics applications, reducing rework and speeding up inspection workflows. Designed with robust stainless steel bodies, high-resolution digital displays and capacitive sensors, these measuring tools provide high accuracy, easy data output and mm/inch conversion for seamless integration into quality processes. Suitable for production, workshop and lab use, they offer durable performance and intuitive operation to support consistent tolerance control.
20mm Interior Measuring Insert Flat Measuring Face 6.5×1mm L30 For Digital Uni Caliper Series 240.201–240.205 - Metav IndustryLine
Take advantage of a precise, durable measuring accessory that extends the capability of existing digital calipers for groove and internal profile inspection. The stainless steel construction and flat measuring face (6.5 × 1 mm, L = 30 mm) provide reproducible contact geometry and long service life. Order the insert directly via Metav Werkzeuge or consult the team for application advice. M240.214 Inside Measuring Insert for Digital‑Uni Calipers – Flat 6.5 × 1 mm, L 30 mm A M240.214 inside measuring insert designed to equip Digital‑Uni calipers for accurate groove and internal profile measurement from 20 mm upwards Flat measuring face 6.5 x 1 mm Compatible with Digital‑Uni series 240.201–240.205 Stainless steel construction for longevity Intended for internal measurements from 20 mm Precise contact geometry optimised for groove measurement The insert features a flat measuring face of 6.5 × 1 mm and an effective contact length of 30 mm, a combination that narrows the contact area to a stable, repeatable surface for groove and slot inspection. This geometry reduces measurement scatter on narrow features and converts the basic caliper into a specialised internal probe for profile checks. The result is improved reproducibility when comparing production parts against drawings or gauges, enabling faster go/no‑go decisions on the shop floor. Robust stainless construction for reliable duty Manufactured from stainless steel, the insert resists corrosion and maintains dimensional stability in typical workshop atmospheres. The material choice supports regular use and cleaning without surface degradation, which preserves the calibrated contact geometry over time. Because the part is small and mechanically simple, wear is limited to contact areas; periodic inspection suffices to confirm ongoing accuracy, making maintenance straightforward and cost‑effective in continuous production environments. Fast retrofit to Digital‑Uni calipers for workflow efficiency Designed specifically for the Digital‑Uni caliper family (series 240.201–240.205), the insert delivers a quick, tool‑free upgrade path for existing instruments. Retrofit capability allows established measuring routines to be extended without purchasing a dedicated specialised gauge, improving resource utilisation and reducing capital expense. The compatibility also preserves the digital readout and data capture workflow of the parent instrument, keeping inspection records consistent and traceable. Practical handling and application benefits in everyday use With a compact overall footprint and a mass of only 0.04 kg, the insert is easy to mount and manoeuvre within assemblies or confined areas. The narrow, flat face gives clear tactile feedback when seating into a groove, translating operator action into a reliable measurement trace. This accessory suits workshop and toolroom tasks where internal features start at 20 mm and precision is required without complex setup. For traceable inspection, the insert is supplied as an accessory for the caliper family and integrates into existing quality routines. Choose the Metav IndustryLine M240.214 insert to extend the capability of Digital‑Uni calipers with a corrosion‑resistant, groove‑optimised contact; contact Metav Werkzeuge for application advice or to request a quotation through the Emmerich quality centre Technical data Article number: M240.214 GTIN: 4061905053719 Weight: 0.04 kg Material: stainless steel Facts Measuring face: 6.5 x 1 mm Insert contact length: 30 mm Overall length: 54 mm Internal measurement start: from 20 mm Special features Compatible with Digital‑Uni calipers series 240.201–240.205 Flat measuring face for groove measurement Corrosion‑resistant construction Compact, light accessory for retrofit FAQ Can this insert be used with any digital caliper? The insert is designed specifically for the Digital‑Uni caliper family (series 240.201–240.205); use with other models may require adaptation or may not provide secure mounting. The M240.214 inside measuring insert is intended to preserve the original caliper fit and function. What types of features is the insert best suited to measure? This accessory is optimised for grooves, narrow slots and internal profiles where a flat measuring face improves contact repeatability. The M240.214 performs best on internal features starting at 20 mm and where a defined contact geometry is required. How does the flat measuring face improve measurement results? The 6.5 × 1 mm flat face concentrates contact to a stable surface, reducing rocking and undefined contact conditions in narrow slots. This yields more reproducible readings compared with blunt or rounded probes when assessing groove widths or profile dimensions. Is a calibration certificate supplied with the insert? The M240.214 is supplied as a measuring accessory; calibration status is managed at the instrument level. If a certified calibration is required for a complete measuring system, please clarify requirements when ordering so the appropriate calibration workflow can be arranged. What material is used and how does it affect longevity? The insert is made from stainless steel, offering corrosion resistance and dimensional stability under normal workshop conditions, which supports sustained accuracy and reduces the need for frequent replacement. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
20mm Internal Measuring Insert, 5×2mm Pin Measuring Faces, L40 For Digital Precision Caliper Series 240.201–240.205 - Metav IndustryLine
Benefit from precise internal measurement starting at 20 mm, a compact 5 × 2 mm pin measuring face and robust stainless‑steel construction for repeatable shop‑floor results; order the insert directly via Metav Werkzeuge or consult our advisors for integration support. Internal measuring insert M240.222 — stainless steel, 5×2 mm pin measuring face for Digital‑Uni calipers The Internal measuring insert M240.222 is an accessory for extending the internal measuring capability of Digital‑Uni calipers in the 240.201–240.205 series, enabling reliable measurement of bores and grooves from 20 mm upwards. Precision pin measuring face 5 x 2 mm Stainless steel construction for wear resistance Fits Digital‑Uni calipers series 240.201–240.205 Confident internal measurement for bores and grooves The insert converts a standard digital caliper into a specialised internal gauge for bores, slots and grooves starting from 20 mm, delivering a controlled contact area with its 5 × 2 mm pin measuring face. The reduced contact footprint permits access to narrow features while maintaining a defined seating point, which reduces measurement variability. Because the accessory is purpose‑made for internal checks, it supports quicker inspection cycles and fewer tool changes, helping to keep production flowing with measurable consistency. Robust stainless‑steel design for repeatable results Manufactured from stainless steel, the insert resists corrosion and abrasion encountered in typical workshop environments, so dimensional stability is preserved over repeated use. The modest mass contributes negligible inertia at the caliper jaws, while the construction ensures that the contact geometry remains intact under normal handling. These attributes together increase repeatability of internal measurements and lower the risk of wear‑induced deviation that otherwise necessitates frequent replacement or rework. Fast retrofit and reliable compatibility with existing calipers Engineered to match the mounting geometry of the Digital‑Uni series 240.201–240.205, the insert installs with minimal adjustment, reducing downtime during tool changes. The compact overall profile and a pin length of 40 mm balance reach and rigidity, while the overall length of 65 mm keeps handling comfortable. For workshops standardising inspection tooling, this accessory offers a pragmatic upgrade route that extends the capability of existing Digital‑Uni calipers without the need for additional dedicated instruments. For advice on integrating the Metav IndustryLine internal measuring insert into inspection routines, or to arrange supply from Metav Werkzeuge, contact info@metav-werkzeuge.com or call +49 2822 7131930 — our specialists will advise on compatibility and delivery. Technical data Article number: M240.222 GTIN: 4061905053740 Weight: 0.05 kg Material: rostfreier Stahl Length (overall): 65 mm Pin length: 40 mm Facts Internal measuring from 20 mm Pin measuring face: 5 x 2 mm Compatible series: 240.201–240.205 Weight: 0.05 kg Special features Stainless‑steel construction Designed for internal bore and groove measurement Retrofit for Digital‑Uni calipers Compact, low‑mass accessory for minimal inertia FAQ What measurement range does the insert cover? The insert enables reliable internal measurement from 20 mm upwards when mounted on the Digital‑Uni caliper series; the defined pin face is intended for bores and narrow grooves. Which calipers are compatible with this accessory? This accessory is made for Digital‑Uni calipers in the 240.201–240.205 range; the mount and dimensions match those models for a secure retrofit. What is the contact geometry of the measuring face? The measuring face on the insert is a 5 x 2 mm pin, offering a small, well‑defined contact area for repeatable internal checks. How durable is the insert in a workshop environment? Constructed from stainless steel, the insert resists corrosion and wear typical of shop use, preserving contact geometry and repeatability over time. How does the insert affect handling and balance of the caliper? With a low mass of 0.05 kg and compact dimensions, the accessory imposes minimal additional inertia, maintaining the caliper’s handling characteristics while extending its function. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
26mm Internal Measuring Insert 7x2mm Ball-Shaped Contact Surface 70mm Length For Digital Caliper Series 240.201-240.205 - Metav IndustryLine
Take advantage of a compact, purpose‑built internal measuring insert that combines durable stainless steel construction with a rounded measuring face for reproducible contact and minimal part damage; the design is optimised for internal measurements starting at 26 mm and integrates directly with the Digital‑Uni caliper family for fast retrofit. Order via Metav Werkzeuge or consult our specialists for compatibility advice. M240.241 internal measuring insert for Digital‑Uni calipers – stainless steel, rounded face The M240.241 is an internal measuring insert designed for internal measurements from 26 mm, offering a 7 x 2 mm profile and a ball‑shaped measuring face for secure contact in confined bores on Digital‑Uni calipers series 240.201–240.205. Internal measuring insert from 26 mm Rounded (ball) measuring face for safe contact Compatible with Digital‑Uni calipers series 240.201–240.205 Consistent internal contact for repeatable results The insert is engineered to provide repeatable internal measurement where restricted access or delicate surfaces demand a gentle touch. The rounded measuring face distributes contact force more evenly than a sharp tip, reducing local indentation and producing more consistent results on bore diameters. Made from stainless steel, the measuring tip resists corrosion and maintains geometric integrity under frequent use, supporting stable measurement routines in workshop and inspection settings. This construction helps the measuring system preserve calibration and reduces downstream rework. Compact geometry that fits tight bores and precision tools With a slender 7 x 2 mm profile and a measuring section specified at 70 mm length, the insert is suited to small‑diameter bores and deep features where standard jaws are impractical. The slim profile enables access without extensive modification to the caliper, so integration into existing measuring setups is efficient. The part’s low mass (approx. 0.08 kg) minimises inertial effects, which supports steady handling and precise positional control during measurement cycles on both manual and semi‑automated inspection stations. Direct compatibility reduces setup time Designed specifically for the Digital‑Uni calipers series 240.201–240.205, this insert allows rapid replacement of existing internal jaws with minimal tooling. Compatibility ensures that digital readout characteristics and mechanical alignment are preserved, so traceability and measurement documentation remain consistent. The insert’s geometry was chosen to match the mounting and guidance of the host calipers, avoiding the need for special adapters and thereby reducing machine downtime during tool changes. Practical benefits for production and quality control The combination of a ball‑shaped contact and stainless material makes the component a reliable choice for repeated internal checks, particularly during in‑process inspection or final quality control. The insert supports precise bore verification without marking, which is beneficial when working with finished surfaces or soft materials. For procurement managers and metrology technicians, this means a straightforward upgrade path to improve measurement coverage while keeping existing instruments in service. Contact Metav Werkzeuge for tailored technical advice and to secure the M240.241 internal measuring insert for seamless integration into the Digital‑Uni caliper family; call +49 2822 7131930 or email info@metav-werkzeuge.com to discuss delivery and compatibility details Technical data Article number: M240.241 GTIN: 4061905053818 Weight: 0.08 kg Material: stainless steel Measuring face length: 70 mm Internal measurement start: 26 mm Compatibility: Digital‑Uni calipers series 240.201–240.205 Core specifications Diameter: 2 mm Profile: 7 x 2 mm Applicable measurement: internal Mass: 0.08 kg Special features Ball‑shaped (rounded) measuring face Corrosion‑resistant stainless steel construction Designed for direct retrofit into listed Digital‑Uni calipers FAQ Is this insert suitable for all Digital‑Uni calipers? The insert is compatible with the Digital‑Uni calipers series 240.201–240.205; compatibility with other models should be confirmed against the caliper’s mounting interface. What is the measuring range for internal measurement? The insert enables internal measurements starting at 26 mm, providing access into bores and recesses beyond that diameter. Will the rounded measuring face mark fragile surfaces? The ball‑shaped measuring face is intended to reduce point loading and therefore lowers the risk of marking compared with sharp tips; material and finish of the workpiece will still influence contact behaviour. Can the insert be used for external measurements? This component is designed as an internal measuring insert; external measurement suitability is not provided and should be handled with purpose‑built external jaws. What material is the insert made from and why does it matter? Constructed from stainless steel, the insert offers corrosion resistance and dimensional stability, which supports longevity and repeatable measuring performance. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
28mm Internal Measuring Insert 7mm Ball End, 70mm Length for Digital Uni Caliper Series 240.201-240.205 - Metav IndustryLine
Take advantage of precise internal contact geometry and robust stainless construction to achieve repeatable readings in confined bores; the ball-shaped measuring face and 70 mm effective length reduce point-load errors for smoother inspection cycles. Order the insert directly via Metav Werkzeuge or ask the consultants for compatibility guidance. M240.242 Internal Measuring Insert — ball-shaped face, 70 mm effective length for Digital‑Uni calipers M240.242 is an internal measuring insert designed for internal measurements from 28 mm and intended for use with the Digital‑Uni calipers series 240.201–240.205. Ball-shaped measuring face for reliable contact 70 mm effective measuring length for internal fits Stainless steel construction for corrosion resistance Compatible with Digital‑Uni calipers 240.201–240.205 Reliable contact geometry for confined bores The ballised tip delivers a defined contact point that reduces sensitivity to minor misalignment during internal measurement, helping to produce repeatable readings in small-diameter bores. By concentrating the contact on a radially curved face, the insert avoids sharp point loading that can skew results; this behaviour is particularly helpful when inspecting bore seats, counterbores or stepped interiors where conventional flat jaws can produce variable contact. The result is faster decision-making in quality checks and fewer retests. Robust stainless design for workshop conditions Manufactured from stainless steel, the measuring insert offers corrosion-resistant performance in mixed workshop environments and resists wear at the contact face for extended service life. The 70 mm effective length balances access into deeper features with sufficient rigidity to limit deflection, which supports stable measurements across repetitive cycles. The compact mass also minimises added inertia to the caliper slider, preserving the instrument’s normal handling characteristics. Seamless integration with Digital‑Uni calipers and inspection workflows Engineered specifically for the Digital‑Uni calipers (series 240.201–240.205), this attachment installs simply onto the existing jaw mount and restores internal measuring capability from 28 mm upwards without complex adjustments. For production lines and bench inspection, the insert streamlines transitions between external and internal checks and reduces set‑up time for small-batch runs. Calibration intervals remain dictated by in‑house procedures; the accessory supports consistent traceability when combined with routine caliper verification. Contact Metav Werkzeuge for personalised compatibility advice or to arrange purchase of the M240.242 insert; our consultants in Emmerich can confirm fitment with existing Digital‑Uni calipers and advise on inspection integration Technical data Article number: M240.242 GTIN: 4061905053825 Weight: 0.08 kg Material: stainless steel Diameter: 4 mm Effective length: 70 mm Internal measurement from: 28 mm Compatible series: 240.201–240.205 Facts ECLASS: 21170324 SKU: M240.242 Special features Ball-shaped measuring face Corrosion-resistant finish Lightweight attachment for caliper slider FAQ What measurement range does the insert cover for internal measurements? The insert enables internal measurements from 28 mm upwards when fitted to the compatible Digital‑Uni calipers in series 240.201–240.205. Is the measuring face designed to reduce measurement variability? Yes, the ball-shaped measuring face of the M240.242 provides a defined contact geometry that reduces point-load effects and improves repeatability in confined bores. Can the insert be used on any caliper brand? The accessory is designed for the Digital‑Uni calipers (series 240.201–240.205); fitment on other brands may require verification — Metav Werkzeuge can advise on cross‑compatibility. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
300 mm Digital Caliper, Carbide Jaws, Square Depth Rod 3.7×1.3 mm, IP67, 0.01 mm Resolution, Four-Function, Stainless Steel - Metav IndustryLine
Take advantage of the combination of IP67 protection, carbide-tipped measuring faces and 0.01 mm resolution for reliable workshop measurements; the robust stainless‑steel construction and protective case keep accuracy consistent in daily use. Order the digital caliper directly via Metav Werkzeuge or contact our consultants for product matching and delivery options. Digital Caliper M216.160.N — 300 mm, carbide-tipped, IP67 (Metav IndustryLine) Digital Caliper M216.160.N — a standard‑range precision measuring instrument for workshop and industrial metrology, featuring carbide measuring faces and a sealed design for use in harsh environments Digital display with MODE and SET buttons Carbide-tipped measuring faces for wear resistance IP67 protection for dust and temporary immersion Delivered in a protective case for transport and storage Reliable accuracy for everyday workshop tasks The caliper is designed to deliver consistent results in production and inspection environments: 0.01 mm resolution combined with a stated accuracy of ±0.03 mm provides measurable confidence for typical machining and assembly tasks. Conformity with DIN 862 ensures that the instrument meets recognised mechanical caliper standards, while the stainless‑steel, hardened frame maintains dimensional stability during repeated use. The numeric readout with MODE and SET simplifies switching between units and functions, reducing measurement time and potential transcription errors. Robust construction and protection that reduce downtime A sealed enclosure with IP67 protection prevents dust ingress and allows temporary immersion, making the caliper suitable for workshops where coolant mist or swarf is present. Carbide-tipped measuring faces give substantially higher wear resistance than plain steel jaws, extending service life in heavy-use applications. The hardened construction and the included protective case reduce the risk of accidental damage during transport and storage, helping to maintain calibration and minimise interruptions to production. Versatile measuring functions for a broad range of tasks This instrument supports 4‑fold measurement capability — outside, inside, depth and step measurements — enabling a single tool to handle the most common dimensional checks. The square depth gauge (3.7 × 1.3 mm) and 60 mm jaw length allow access to confined features and stepped components, bridging workshop convenience with the reach needed for many assemblies. As a standard‑range device (0–300 mm), it occupies the universal middle ground between compact and large calipers, offering a balance of reach, stiffness and one‑hand operation suited to machine shops and maintenance departments. Contact Metav Werkzeuge today for tailored advice on how the Metav IndustryLine Digital Caliper M216.160.N can integrate into existing inspection workflows and for information on delivery from our Emmerich hub Technical Data Article number: M216.160.N GTIN: 4054469178899 Tariff number: 90173000 Brand: Metav IndustryLine Facts Measuring range: 0–300 mm Resolution: 0.01 mm (0.0005 in) Accuracy: ±0.03 mm Weight: 1 kg Jaw length: 60 mm Special features Material: hardened stainless steel Measuring faces: carbide-tipped Protection class: IP67 Standard: DIN 862 Display: digital with MODE and SET buttons Depth gauge: square, 3.7 × 1.3 mm Measuring functions: outside, inside, depth, step Delivered in protective case FAQ What measurement functions does this caliper support? The Metav IndustryLine digital caliper supports outside, inside, depth and step measurements, providing four measurement modes for common workshop tasks. Is the caliper suitable for use in wet or dusty environments? Yes. The caliper’s IP67 rating ensures resistance to dust ingress and temporary immersion, making it suitable for use where coolant spray or fine particles are present. What level of precision can be expected from this instrument? The instrument offers 0.01 mm resolution with a stated accuracy of ±0.03 mm, which is appropriate for standard machining, inspection and assembly operations. Are the measuring faces resistant to wear? Yes. The caliper features carbide-tipped measuring faces, which significantly improve wear resistance compared with plain steel jaws. Does this caliper comply with recognised standards? The device is manufactured according to DIN 862, aligning with established mechanical caliper requirements for workshop use. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
300 mm Digital Caliper, Square Depth Rod 3.7 x 1.3 mm, IP 67, 0.01 mm Resolution, Four-Function, Hardened Stainless Steel
Take advantage of the combination of robust IP67 protection, hardened stainless steel construction and 0.01 mm resolution for reliable shop‑floor quality control. Order the digital caliper directly via Metav Werkzeuge or ask our consultants if technical advice is needed. Digital caliper 300 mm (IP67) — Metav IndustryLine precision caliper with square depth rod A Digital caliper 300 mm designed for workshop and quality‑control use, combining dust‑ and water‑resistance with a square depth rod for accurate depth and step measurements. Robust IP67 protection for harsh environments Accurate 0.01 mm resolution with ±0.03 mm accuracy Hardened stainless steel construction for long life Four measurement functions: inside, outside, depth, step Reliable accuracy for everyday quality control The caliper delivers a 0.01 mm display resolution and an accuracy of ±0.03 mm, values that meet common workshop requirements and align with the DIN 862 standard. Classified in the Standard size range (measurement capacity up to 300 mm), this model hits the balance between reach and rigidity that technicians expect for general‑purpose tasks. The unit’s digital readout simplifies readings and reduces interpretation errors compared with analogue scales, helping to keep inspection times short and reproducibility high. Built to withstand shop conditions and precise handling demands With an IP67 protection rating and a hardened stainless steel body, the instrument resists ingress from coolant, chips and dust while maintaining dimensional stability. The square depth rod (3.7 x 1.3 mm) permits depth and step measurements in narrow recesses where rounded rods would be less reliable. The display features MODE and SET buttons and inch/mm conversion for flexible use across different workflows, while a balanced slider and clear scale deliver ergonomic handling for routine measuring tasks. Streamlined measurement workflow that reduces rework The combination of a clear digital display, quick unit switching and the four supported measurement types (inside, outside, depth, step) makes this caliper a practical tool for production control and first‑article inspection. Integrating this measuring device into shop routines reduces repeat work and accelerates decision making at the machine or bench. For users seeking consistent results across shifts, the caliper’s mechanical build and straightforward controls promote repeatable measurements and faster quality checks. Opt for the Metav IndustryLine digital caliper for dependable, shop‑ready performance and contact Metav Werkzeuge for tailored product guidance via info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data SKU: M216.153.N GTIN: 4054469178868 Label: Digital caliper 300 mm, IP67 with square depth rod 3.7 x 1.3 mm Brand: Metav IndustryLine Norm: DIN 862 Facts Measurement range: 0–300 mm Resolution: 0.01 mm / 0.0005 in Accuracy: ±0.03 mm Depth rod cross section: 3.7 x 1.3 mm Weight: 1 kg Protection class: IP67 Special features Hardened stainless steel construction Digital display with MODE and SET buttons Inch/mm conversion function Four measurement functions: inside, outside, depth, step Compliant with DIN 862 FAQ What measurement functions are available with this caliper? The digital caliper provides four measurement functions — inside, outside, depth and step — enabling flexible inspection tasks with a single instrument. What does IP67 protection mean for workshop use? IP67 indicates dust tightness and temporary immersion resistance, so the caliper tolerates coolant splash and chip exposure typical in metalworking environments. Is the accuracy sufficient for standard machine‑shop control? Yes. With a resolution of 0.01 mm and an accuracy of ±0.03 mm, the caliper meets routine quality‑control needs for components within the standard 0–300 mm range. How does the square depth rod improve depth measurements? The square depth rod (3.7 x 1.3 mm) provides a stable contact surface for narrow recesses and stepped features, improving reproducibility compared with thin or rounded depth probes. Which standard does the instrument comply with? The tool is manufactured to the DIN 862 framework for calipers and general measuring practice. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
300mm Caliper Jaw Adapter For 4mm Max Jaw Thickness, Attachment For Caliper Measuring Tips - Metav IndustryLine
Take advantage of the combination of compatibility with standard calipers (0–300 mm), a maximum jaw thickness allowance of 4 mm, and a lightweight, easy-to-fit design to keep measurement tasks efficient and repeatable on the shop floor. Order the accessory directly via Metav Werkzeuge or consult the team for application advice. Measuring Adapter for Calipers M240.311 — fits 0–300 mm calipers, 4 mm max jaw thickness (Metav IndustryLine) Measuring Adapter for Calipers M240.311 is an attachment that extends the functionality of standard calipers, enabling secure use where jaw thickness or geometry would otherwise limit access Compatible with 0–300 mm calipers Accepts up to 4 mm jaw thickness Lightweight accessory — 0.05 kg Simple attachment for measuring jaws Extend caliper capability while preserving measurement quality The adapter transforms a standard caliper into a more versatile gauging tool without altering the instrument’s core accuracy. Designed for the Standard (0–300 mm) caliper class, the accessory accepts jaws up to 4 mm thick and is intended for direct, repeatable mounting on common analogue calipers. As a result, workshops gain access to otherwise awkward measuring points without the need for specialised instruments, improving throughput and reducing setup time. The compact mass of 0.05 kg minimises added inertia, so handling remains nimble and stable during routine inspection work. Quick fit and reliable handling for everyday workflows Installation emphasises speed and repeatability: the attachment clamps to the caliper measuring jaws and stays secure during typical measuring sequences. Being an analogue accessory it integrates seamlessly with mechanical verniers and digital calipers of compatible jaw thickness, preserving the original measuring functions and ergonomics. The straightforward design reduces training time for operators and supports faster measurement cycles, delivering a clear efficiency gain in production and quality control tasks. The robust fitting prevents slippage, enhancing confidence in measured values under normal workshop conditions. Practical choice for workshops and metrology suppliers As a small but effective accessory from Metav IndustryLine, the M240.311 suits both craft and light industrial environments where adaptability matters. It bridges the gap between specialist gauges and everyday calipers, enabling teams to meet measurement challenges without overcomplicating tool inventories. The accessory complements existing metrology equipment by expanding application range while keeping procurement and storage simple — an economical way to increase capability at the bench or in a service van. For straightforward integration into inspection routines or for advice on compatibility with a specific caliper model, contact Metav Werkzeuge to request the M240.311 measuring adapter or to discuss application specifics — call +49 2822 7131930 or eMail info@metav-werkzeuge.com Technical Data Article number: M240.311 GTIN: 4054469159508 Manufacturer: Metav IndustryLine Core data Suitable for calipers: 0–300 mm Max jaw thickness: 4 mm Weight: 0.05 kg Customs tariff number: 90178090 Special features Attachment for caliper measuring jaws Compatible with common standard calipers Class: Standard (0–300 mm) Analogue accessory FAQ Can this adapter be used on any caliper model? The adapter is compatible with calipers that have a measuring range up to 0–300 mm and jaws no thicker than 4 mm; check jaw geometry against the M240.311 dimensions for secure fit. Will the adapter affect the caliper’s accuracy? The accessory does not change the caliper’s internal measuring mechanism; measurement accuracy remains governed by the caliper itself, while the adapter provides improved access and handling for specific workpieces. Is the material specified for the adapter? The product specification does not list a base material; refer to the technical data or contact Metav Werkzeuge for detailed construction information if material composition is required for a particular application. What types of measurements can be carried out with the adapter fitted? All standard caliper functions remain available; the adapter facilitates improved engagement of the jaws for external or step measurements where jaw thickness or shape would otherwise obstruct access. Is this accessory suitable for regular workshop use? Yes — the adapter is designed for routine use in workshops and small production environments where extending caliper capability is preferable to introducing additional specialised gauges. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
300mm Digital Caliper 0.01mm Resolution Automatic Power-Off, IP67, Stainless Hardened Steel, Four-Point Measurement, Plastic Case - Metav IndustryLine
Take advantage of a robust, workshop-ready digital caliper that combines IP67 protection, a hardened stainless steel body and a precise 0.01 mm resolution to ensure reliable, repeatable measurements on the production floor; order directly via Metav Werkzeuge or consult our specialists for application advice. Digital Caliper M216.163.D (0–300 mm, IP67) — Metav IndustryLine The Digital Caliper M216.163.D is a workshop-grade 0–300 mm measuring instrument designed to meet DIN 862 requirements, offering sealed operation for damp or dusty environments and a clear, function-rich digital readout IP67 protection for harsh environments Resolution 0.01 mm with ±0.03 mm accuracy Hardened stainless steel construction Four measurement functions: in/out/depth/step Reliable precision that fits everyday workshop work The M216.163.D is built as a standard-range caliper (0–300 mm), the size that best balances reach and rigidity for everyday tasks in machining and metalwork. With a resolution of 0.01 mm and a stated accuracy of ±0.03 mm, the instrument delivers measurements compatible with standard inspection routines and quality-control checks according to DIN 862. The hardened stainless steel frame reduces wear and helps retain calibration over repeated use, supporting consistent measurement results across production batches. Sealed design and robust materials reduce downtime Thanks to its IP67 rating, this digital instrument tolerates dust ingress and temporary immersion, allowing safe use in workshop areas where coolant spray or fine particles are present. The corrosion‑resistant, hardened construction minimises susceptibility to surface damage and deformation, which keeps calibration stable and lowers maintenance requirements. The compact weight of 0.6 kg aids handling while the 60 mm jaw length offers secure grip on typical components without compromising accessibility. Practical digital functions for faster inspection The capacious digital display provides intuitive controls for inch/metric conversion, mode selection, data hold and on/off, while an energy-efficient 3 V CR2032 battery powers the unit with an automatic shut‑off to extend battery life. Note that the instrument is supplied without a data output interface, so it is ideal where reliable manual reading and quick documentation are the priority rather than electronic data capture. The device’s straightforward operation reduces time per inspection and helps maintain throughput in shop-floor quality checks. Versatile measurement capability for workshop tasks Equipped for four measurement functions — external, internal, depth and step — the caliper covers the usual inspection needs of design, fixture and component manufacturing. Classified as a standard caliper, it is suitable for workshop preparation, assembly control and maintenance tasks where a balance of reach and rigidity is required. The combination of practical functions and robust design makes it a dependable choice for routine dimensional verification. For application-specific advice or to arrange supply of this Metav IndustryLine caliper, contact Metav Werkzeuge — our consultants will recommend the best option for the operational environment and measurement plan Technical Data Article number: M216.163.D GTIN: 4054469182933 Manufacturer: Metav IndustryLine Category: Digital calipers Standard: DIN 862 Facts Measuring range: 0–300 mm Resolution: 0.01 mm Accuracy: ±0.03 mm Weight: 0.6 kg Jaw length: 60 mm Battery: 3 V CR 2032 Special features Material: stainless steel, hardened Protection class: IP67 Display functions: inch/metric, mode, hold, on/off Auto power-off Four measurement functions: outside, inside, depth, step No data output FAQ What measuring range and accuracy does this caliper offer? The Metav IndustryLine Digital Caliper M216.163.D covers 0–300 mm with a display resolution of 0.01 mm and a declared accuracy of ±0.03 mm, suitable for standard workshop inspections. Can the caliper be used in wet or dusty conditions? Yes. The instrument is rated IP67, permitting use in environments with dust exposure and temporary immersion, which helps protect measuring surfaces and electronics. Does the caliper provide electronic data output for SPC systems? No. The device is supplied without a data output interface and is optimised for manual reading and documentation rather than direct digital transfer. Which measurement tasks are supported by this caliper? The caliper supports four measurement functions — external, internal, depth and step — covering typical workshop and assembly inspection duties. What battery does the caliper use and are there energy-saving features? The unit uses a 3 V CR2032 battery and includes an automatic shut‑off to conserve power during intermittent use. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
300mm Digital Caliper 0.01mm/0.0005" Fraction Display, mm/inch/On-Off-Null Buttons, Four-Point Measurement, Hardened Stainless Steel, Case - Metav IndustryLine
Take advantage of precise, workshop-ready measuring: the combination of 0.01 mm resolution, hardened stainless construction and four measuring functions ensures reliable, repeatable results for routine production and quality control. Order the caliper directly via Metav Werkzeuge or ask the consultants for matching accessories and data interfaces. Digital caliper M216.173 (300 mm) — Digital readout mm/inch/fraction, 0.01 mm The Digital caliper M216.173 is a 300 mm precision measuring instrument for standard workshop and machine‑shop use, offering metric, imperial and fractional readouts for flexible inspection tasks. *Digital display mm/inch/fraction *Resolution 0.01 mm / 0.0005" *Hardened stainless steel construction *Four measuring functions *Delivered in protective transport box Consistent shop-floor accuracy with measurable resolution Equipped with a 0.01 mm resolution and a class‑typical digital readout, this caliper supports dependable tolerance checks across routine production tasks. For the 0–300 mm range the unit sits in the standard class of calipers, which balances reach and rigidity for common metalworking and assembly operations. The high‑contrast digital display reduces reading errors and the fractional mode (1/128") simplifies work with legacy drawings or imperial specifications. These traits make the tool a practical choice where traceable, repeatable measurements help reduce rework and maintain process efficiency. Robust construction for daily workshop handling A hardened stainless steel body gives the instrument resistance to wear and a stable measuring face over long service intervals. The compact mass and balanced feel support single‑hand operation while the included transport box protects the instrument in transit and on busy benches. Together, durability and protected storage minimise downtime and prolong the tool’s useful life, which is particularly valuable where multiple operators or shift work increase handling frequency. Flexible measurement modes for varied inspection needs The caliper offers four measuring functions, enabling outside, inside, depth and step measurements with the same instrument, which streamlines inspection routines and reduces tool changes. The digital electronics provide fast switching between mm, inch and fraction displays, plus convenient zeroing and on/off controls, so measurement cycles are shortened and data remain clear—benefits that translate directly into faster setup times and more consistent quality checks. Integration-ready output and clear product identity A dedicated data output (RB 6) is provided for external capture of measured values, supporting documentation and SPC collection without manual transcription. The instrument is identified by article number M216.173 and GTIN 4054469169019 for inventory and procurement processes. Supplied weight and dimensions make the caliper straightforward to store and integrate into inspection kits, and the hardened jaws ensure long‑term contact reliability for frequent use. Contact Metav Werkzeuge for specification matching and to secure the Metav IndustryLine digital caliper M216.173 for your workshop supply needs Technical data Article number: M216.173 GTIN: 4054469169019 Label: Digital caliper 300 mm, display in mm/inch/fraction Manufacturer: Metav IndustryLine SKU: M216.173 ECLASS: 21170344 Customs tariff: 90173000 Facts Measurement range: 0–300 mm Resolution: 0.01 mm Imperial resolution: 0.0005" / 1/128 Weight: 0.6 kg Special features Digital display with ON/OFF, ZERO and mm/inch/fraction functions Four measuring functions: outside, inside, depth and step Material: hardened stainless steel Data output: RB 6 Delivered in a transport box for protection FAQ What measurement modes are available with this caliper? The instrument supports outside, inside, depth and step measurements via its four measuring functions; values are shown on the digital display in mm, inch or fraction. How precise is the readout on the caliper? The caliper provides a 0.01 mm resolution and an imperial readout equivalent to 0.0005" or 1/128", suitable for standard workshop quality control across the 0–300 mm range. Is the caliper suitable for daily shop use? Yes. The hardened stainless steel construction and supplied transport box make it robust for regular handling and storage in busy production environments. Can measured data be exported to a data logger or PC? A data output interface (RB 6) is available for external capture of values, enabling straightforward transfer to compatible data collection systems. What identifiers help with ordering and inventory? Use article number M216.173 and GTIN 4054469169019 to ensure the correct Metav IndustryLine digital caliper is procured. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
300mm Digital Caliper Absolute ABS, 0.01mm Resolution, Tolerance LED, IP54, Four‑Function Measurement, Delivered in Case - Metav IndustryLine
Take advantage of the combination of IP54 protection, the TOL‑LED tolerance indicator and the ABS absolute measuring system for fast, reliable shop‑floor decisions; order directly via Metav Werkzeuge or consult the team for technical advice. Digital caliper 300 mm M216.223 — IP54, TOL‑LED & ABS absolute system (Metav IndustryLine) The Digital caliper 300 mm is a workshop-grade measuring instrument designed for dimensional checks in metalworking, quality control and general workshop tasks. IP54 protection for dusty workshop environments TOL‑LED for immediate tolerance visualisation ABS absolute system; ORIGIN and MODE functions 0.01 mm resolution with DIN 862 accuracy Four measurement modes: inside/outside/depth/step Faster decisions with visual tolerance control A clear TOL‑LED tolerance indicator shortens inspection time by showing pass/fail results at a glance, which reduces rework and speeds throughput. Combined with a 0.01 mm display resolution and conformity to DIN 862, this tool provides the measurable certainty required in production and incoming inspection. The caliper supports the fundamental measurement tasks—inside, outside, depth and step—so single‑instrument checks replace multiple gauges while keeping traceable numeric output for process documentation. Built to withstand workshop conditions and repeatable use The jaw and beam are made from hardened stainless steel with a glass-reinforced scale, providing long service life and resistance to normal workshop wear. An IP54 rating protects the electronics against dust ingress and splash water, maintaining reliability in harsher environments. The ABS absolute system (3 V) ensures the instrument retains its reference position after power cycles, while ORIGIN, MODE, TOL, HOLD and INC/ON‑OFF controls make operation straightforward during repetitive checks. The robust construction and intuitive controls support consistent results across shifts. Practical integration that saves time on the shop floor The caliper has a resolution of 0.01 mm (0.0005 in) and offers an operation without measurement speed limits, which means faster sliding and less waiting during checks. The instrument’s compact ergonomics and defined jaw geometry (60/26 mm) help maintain repeatability when taking measurements on machined parts or assemblies. Delivery includes a transport case for safe handling and storage, facilitating mobile use between machines or inspection benches. The 4‑mode measuring capability consolidates routine tasks and reduces tool changes, improving overall efficiency. For clear tolerance control and robust workshop performance choose the Metav IndustryLine Digital caliper 300 mm; contact Metav Werkzeuge in Emmerich for ordering or technical consultation at info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: M216.223 GTIN: 4054469164236 Category: Messschieber Weight: 0.4 kg Material: hardened stainless steel; scale with glass beam Protection class: IP54 Facts Measurement range: 0–300 mm Resolution: 0.01 mm / 0.0005 in Jaw length: 60/26 mm System: Absolute (3 V) Four measurement modes: inside / outside / depth / step Special features TOL‑LED tolerance indicator ORIGIN, MODE, TOL, HOLD, INC, ON/OFF controls Conforms to DIN 862 accuracy requirements No measurement speed limitation Delivered in a transport case (plastic/wooden) FAQ What accuracy can be expected from this caliper? The caliper provides a resolution of 0.01 mm and is specified to meet the accuracy criteria of DIN 862, making it suitable for standard workshop and quality‑control tasks. Can the instrument perform inside and depth measurements? Yes, the tool supports four measurement modes—inside, outside, depth and step—so a single instrument covers common dimensional inspections. How does the TOL‑LED function help in production control? The TOL‑LED gives immediate visual feedback on whether a measured value lies within set tolerance limits, enabling faster go/no‑go decisions and reducing manual data interpretation. Is the caliper resistant to workshop dust and coolant splashes? The unit carries an IP54 rating, providing protection against dust and splashing water typical in machining environments. Does the caliper retain its zero after switching off? The ABS absolute system maintains the reference position even after power‑off, removing the need for re‑zeroing before each measurement session. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
300mm Digital Caliper Absolute ABS, Removable Thumb Roller, 0.01mm Resolution, 4‑Function Measuring, DIN 862, Supplied in Case - Metav IndustryLine
Take advantage of precise workshop measurement with a compact, robust instrument: a 300 mm range, 0.01 mm resolution and an ABS absolute system ensure reproducible results across routine inspection and production tasks. Order the caliper directly via Metav Werkzeuge or request further technical advice from our consultants. Digital caliper M216.237.N — 300 mm absolute system with removable thumb roller (Metav IndustryLine) Digital caliper M216.237.N is a workshop-grade measuring instrument for mechanical and metalworking applications, designed for repeatable, easy-to-read measurements in production and quality control. 300 mm measuring range, workshop standard 0.01 mm resolution, precise readout ABS absolute system with removable thumb roller Four measurement modes: inside, outside, depth, step Reliable precision for everyday workshop measurement The instrument is classified as a standard caliper for the 0–300 mm range, which balances reach and stiffness for most machining and assembly tasks. A resolution of 0.01 mm (0.0005 in) combined with the ABS absolute measuring system produces clear, immediate readings and reduces the need for repeated zeroing. Conformance to DIN 862 provides an established frame of reference for accuracy expectations in workshop and quality control environments, making the tool suitable for routine inspection and process checks where reproducibility matters. Versatile handling and fourfold measuring capability Equipped with a removable thumb roller, the caliper is usable with or without the roller to suit ergonomic preferences and handling in tight spaces. The slider integrates an ABS absolute encoder powered at 3 V, while the display offers ORIGIN, UNIT, ON/OFF and 0/ABS functions for straightforward operation. The design supports four measurement modes — outside, inside, depth and step — which reduces the need for separate instruments and speeds up inspection cycles. A dedicated RB 5 data output enables connection to data capture systems for traceable measurement logging. Robust construction for repeatable results The measuring frame is made from hardened stainless steel with a glass scale rail, selected to maintain dimensional stability and resist wear under regular workshop use. The material pairing gives consistent contact geometry and reduces wear at the measuring faces, which helps retain accuracy over time. At 0.7 kg the instrument remains manageable for handheld work while providing sufficient mass for stable operation. Delivery in a transport case protects the instrument during shipment and storage, supporting longevity and secure handling between job sites. Integration and efficiency in quality workflows With a built-in data interface (RB 5) and an absolute measuring system, the caliper can be integrated into batch inspection routines and basic digital quality records without complex setup. The combination of immediate absolute readings and a standard data output reduces manual transcription errors and supports faster throughput in repetitive measurement tasks. Where traceability is required, the instrument’s display functions and digital output simplify documentation of nominal values and deviations for production feedback loops. Contact Metav Werkzeuge for tailored advice on the Metav IndustryLine digital caliper M216.237.N or request detailed datasheets via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: M216.237.N GTIN: 4054469159379 Brand: Metav IndustryLine Measuring range: 0–300 mm Resolution: 0.01 mm / 0.0005 in Measuring system: Absolute (ABS), 3 V Data output: RB 5 Display functions: ORIGIN, UNIT, ON/OFF, 0/ABS Weight: 0.7 kg Standard: DIN 862 Facts Measuring range: 0–300 mm Resolution: 0.01 mm Weight: 0.7 kg Material hardness: hardened stainless steel Data interface: RB 5 Special features Hardened stainless steel with glass scale rail Removable thumb roller; usable with or without drive roller Four measurement modes: outside, inside, depth, step Transport case supplied FAQ What measurement modes are available on this caliper? The caliper supports four measurement modes — outside, inside, depth and step — enabling versatile inspection without additional tools; these functions are available via the slider and clearly indicated on the display of the Metav IndustryLine digital caliper M216.237.N. How accurate is the Metav IndustryLine digital caliper for routine inspections? The instrument provides a resolution of 0.01 mm (0.0005 in) and is manufactured to meet DIN 862 standards, making it suitable for standard industrial quality control and workshop measurement tasks. Can measurement data be exported for documentation? Yes. The caliper features an RB 5 data output for connection to data loggers or PC interfaces, facilitating digital capture of measuring results from the Metav IndustryLine unit. Is the thumb roller fixed or removable? The thumb roller is removable and the caliper is designed to be operated with or without the roller, allowing adaptation to ergonomic preferences and confined measuring situations. What materials and construction ensure durability? Construction uses hardened stainless steel with a glass scale rail, chosen to provide wear resistance and stable measuring geometry under regular workshop use. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
300mm Digital Caliper Absolute Display With On/Off 0/ABS Mm/Inch Origin IP54, Supplied In Case - Metav IndustryLine
Benefit from the combination of IP54 protection, an absolute measuring system and four measuring modes for dependable workshop performance. Order the Digital Caliper M216.257 directly via Metav Werkzeuge or ask our consultants if needed. Digital Caliper M216.257 — 300 mm absolute digital caliper, IP54 (Metav IndustryLine) The Digital Caliper M216.257 is a robust workshop caliper designed for precise linear measurements in machining and quality control, offering an absolute measuring system and a protected enclosure for everyday industrial use Absolute measuring system for stable readings IP54 protection against dust and splashes 4-in-1: inside, outside, depth and step Stainless steel body with glass scale Consistent accuracy for shop-floor measurements The caliper is built around an absolute measuring system that delivers repeatable readings and reduces the need for frequent re-zeroing. With a stated accuracy of 0.03 mm and conformity to DIN 862, the instrument suits standard metrology tasks in machine shops and production control. The 300 mm measuring range classifies this tool as a Standard caliper, offering the best compromise between reach and rigidity for general workshop use. The four measuring modes — external, internal, depth and step — make the instrument polyvalent, simplifying inspection routines and reducing the number of separate gauges required on the bench. Robust construction for industrial environments Durability is addressed through a stainless steel body combined with a glass scale, which together resist wear while keeping the measuring surfaces stable. The enclosure rating IP54 protects the electronics from dust ingress and water splashes, permitting reliable use in tougher shop-floor conditions. A delivery case is included for transport and storage, helping to protect the caliper between shifts. At approximately 0.8 kg, the instrument balances solidity with handling comfort so that repetitive measuring tasks remain straightforward and controlled. Clear display, practical controls and data output The digital display is fitted with practical controls — on/off, 0/ABS, mm/inch and an Origin button — enabling fast switching between functions and measurement systems. Power is supplied by a 3 V CR2032 battery, providing long operating intervals for typical inspection workloads. For traceable data transfer, the caliper offers an RB 6 data output interface, allowing measured values to be recorded directly into data-collection systems or inspection software. The device is also usable with or without a drive roller, increasing compatibility with diverse setup arrangements on measuring stations. Practical fit for production and quality assurance Intended for workshop metrology, the tool supports routine dimensional control, first-article inspections and rework verification. Its combination of standards compliance, multiple measuring functions and secure data output reduces measurement-related downtime and streamlines documentation. The construction and interface choices mean the caliper integrates readily into existing inspection procedures, while the Standard measuring length remains a versatile option across general engineering, maintenance and small-batch manufacturing environments. Contact Metav Werkzeuge to request further technical details or to procure the IP54 Digital Caliper M216.257 directly from our Emmerich stock Technical data Article number: M216.257 GTIN: 4054469182575 Label: Digital Caliper 300 mm, IP54 DIN 862 Manufacturer: Metav IndustryLine Numbers / Core technical data Measuring range: 0–300 mm Accuracy: 0.03 mm Display resolution: 0.03 mm Weight: 0.8 kg Jaw length: 60 mm Battery: 3 V CR2032 Protection class: IP54 Special features / Versions Absolute measuring system Conforms to DIN 862 4-in-1 measurement: external, internal, depth, step Data output: RB 6 Digital display with ON/OFF, 0/ABS, mm/inch, Origin Stainless steel body with glass scale Supplied in transport case Usable with or without drive roller FAQ What measurement range does this caliper cover? The Digital Caliper M216.257 covers a measuring range of 0–300 mm, classifying it as a Standard caliper suitable for general workshop tasks. How accurate is the instrument for daily inspections? The instrument provides an accuracy of 0.03 mm and is manufactured to comply with DIN 862, making it appropriate for standard machine‑shop quality checks. Which measuring functions are available? The caliper supports four functions: external, internal, depth and step measurements, enabling broad use across inspection routines. Is the caliper suitable for dusty or damp shop conditions? Yes, the device carries an IP54 rating, so the electronics are protected against dust and splashing water for reliable shop‑floor operation. How are readings transferred to a PC or data logger? Readings can be exported via the RB 6 data output; the caliper’s digital interface and simple controls facilitate integration with data‑collection systems. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
300mm Digital Caliper Absolute System With Removable Roller, IP54 - Metav IndustryLine
The combination of IP54 protection, an Absolute measuring system and a removable drive roller provides dependable workshop performance and reproducible results; ideal for standard metrology tasks in production. Order the Digital Caliper 300 mm directly via Metav Werkzeuge or ask our consultants if needed. Digital caliper M216.227 – 300 mm, Absolute system, IP54 (Metav IndustryLine) The Digital Caliper M216.227 is a robust, workshop‑ready measuring instrument designed for precise dimensional control in machining and inspection tasks. Absolute measuring system, resolution 0.01 mm IP54 splash protection for workshop use Removable drive roller for continuous measurement Four‑function measurements: inside/outside/depth/step Precision and measurement reliability for routine inspection The Digital Caliper M216.227 combines an Absolute measuring system with a standard resolution of 0.01 mm and inch readout to 0.0005 in, delivering stable, drift‑free position values after power cycles. This technical basis reduces the need for repeated zeroing and supports efficient batch inspection. The caliper’s four‑function measurement capability enables inside, outside, depth and step readings with a single instrument, which shortens process steps and increases throughput when several measurement types are required. Built for the workshop: durability and handling advantages Built from stainless hardened steel with a glass scale, the caliper resists wear while keeping the slide smooth and repeatable. The IP54 rating protects against workshop dust and splash, so measurements remain reliable in harsher environments. The removable drive roller offers flexible operation: measurements can be taken with the roller fitted for continuous surface runs or without it for traditional jaw contact. Classified within the Standard (100–300 mm) range, this instrument balances reach and rigidity for everyday machine‑shop and metalworking tasks. Efficient data flow and user‑oriented operation The device provides a practical digital interface with ON/OFF, 0/ABS, mm/inch and ORIGIN functions, simplifying setup and unit changes on the shop floor. A dedicated RB 6 data output enables secure transfer of measured values into inspection software or data loggers, supporting traceable quality records. Compliance with DIN 862 ensures that measurement behaviour matches established workshop expectations. Together, these features improve measuring chain efficiency and reduce transcription errors during quality control. Contact Metav Werkzeuge to arrange supply of the Metav IndustryLine digital caliper M216.227 with IP54 protection and RB 6 data output for straightforward integration into existing inspection routines. Technical Data Article number: M216.227 GTIN: 4054469158303 Brand: Metav IndustryLine ECLASS: 21170344 Facts Measuring range: 0–300 mm Resolution: 0.01 mm Inch resolution: 0.0005 in Weight: 0.4 kg Protection class: IP54 Special features Absolute measuring system (3 V) Removable drive roller Four‑function measurement (inside/outside/depth/step) Material: hardened stainless steel; scale with glass slide Data output: RB 6 Digital display functions: ON/OFF, 0/ABS, mm/inch, ORIGIN Complies with DIN 862 FAQ Is the caliper suitable for everyday machine‑shop use? The M216.227 is designed for workshop environments with its IP54 protection and hardened stainless construction, making it suitable for routine machining and inspection tasks. Can measurements be recorded automatically? Yes. The caliper provides an RB 6 data output for direct transfer of measured values into inspection systems or data loggers. Which measurement functions are available? The instrument supports four measurement modes: outside, inside, depth and step measurements, enabling versatile use across components. Does this caliper retain its reference after switching off? The Absolute measuring system maintains position information when powered down, so the caliper returns to the correct zero reference on restart. Is the roller always required for measurement? No. The removable drive roller is optional; the caliper can be used with or without the roller depending on the measurement task. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
300mm Digital Caliper Antimagnetic Stainless Steel With Round Depth Rod, Four‑Function Readout, DIN 862 - Metav IndustryLine
Combining an antimagnetic, non‑magnetic stainless‑steel construction with a 0–300 mm measuring range and an RB 5 data output, this caliper delivers reproducible shop‑floor measurements and smooth data transfer for quality control. Order directly via Metav Werkzeuge or consult our specialists for application advice. Digital caliper M216.177 (300 mm) – antimagnetic, stainless steel, RB 5 The Digital caliper M216.177 is a standard‑range precision instrument for general workshop and machine‑shop measurements, offering digital readout and antimagnetic stainless construction for reliable use in mixed‑material environments. Digital display with ON/OFF, ZERO, UNIT, HOLD Antimagnetic, non‑magnetic stainless steel construction Four‑way measurement: inside, outside, depth, step Includes protective transport case Robust precision for daily workshop use The caliper is engineered from non‑magnetic stainless steel, providing corrosion resistance and immunity to magnetic interference where repeatable readings matter. With a 0–300 mm measuring range it falls into the Standard class of calipers, which balances reach, stiffness and one‑hand operation—ideal for routine tasks in machining and metalwork. The compact mass (approx. 0.3 kg) and durable jaw geometry support stable clamping and minimise bending during measurement, so measurements remain consistent across production runs. Digital workflow and reliable data transfer Equipped with a clear digital display and buttons for ON/OFF, ZERO, UNIT and HOLD, the instrument reduces transcription errors and speeds up quality checks. The RB 5 data output allows direct connection to data collection systems or PCs for traceable documentation and statistical process control. Supplied with a 3 V power system, the electronic unit follows industry practice for shop‑grade digital calipers and complies with DIN 862, ensuring the device meets recognised measuring standards and integrates smoothly into existing inspection routines. Versatile measurement capability and secure transport This caliper supports four‑way measurement—inside, outside, depth and step—with a round depth rod for easier engagement in narrow features. The jaw lengths of 60/26 mm permit access to common measuring situations, while the included protective case safeguards the tool during transport and storage. Delivered as a complete set, the instrument is suitable for workshop inspection, maintenance departments and precision assembly lines where dependable, repeatable gauges are required. Choose the Metav IndustryLine digital caliper for robust, shop‑grade measuring performance and contact Metav Werkzeuge in Emmerich for tailored advice and fast supply. Technical Data Article number: M216.177 GTIN: 4054469168234 eClass: 21170344 Customs tariff number: 90173000 Numbers / Core technical data Measuring range: 0–300 mm Maximum measuring range: 300 mm Weight: 0.3 kg Jaw length: 60/26 mm Power supply: 3 V Label: Digital‑Messschieber, 300 mm, antimagnetisch Data output: RB 5 Special features / Versions Antimagnetic design Material: non‑magnetic stainless steel Digital display with ON/OFF, ZERO, UNIT, HOLD Four‑way measurement (inside, outside, depth, step) Round depth gauge Supplied in protective case Conforms to DIN 862 FAQ What measurement range does this caliper cover? The Digital caliper M216.177 covers a measuring range of 0–300 mm, classifying it as a Standard caliper suitable for typical workshop and machine‑shop applications. Is the instrument suitable for work near magnetic fields? Yes. The antimagnetic, non‑magnetic stainless‑steel construction of the M216.177 reduces magnetic influence and is designed for environments where magnetic interference could otherwise affect readings. Can measurement data be exported to a PC or data logger? Yes. The caliper features an RB 5 data output for connection to data acquisition systems, enabling direct transfer of readings for documentation and quality control. Which measurement tasks can be performed with this caliper? The device supports inside, outside, depth and step measurements (four‑way measurement) and includes a round depth rod for access to narrow features, making it versatile for components, housings and assemblies. Does the caliper meet recognised standards? The instrument is manufactured to comply with DIN 862, aligning it with common workshop inspection and quality procedures. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
300mm Digital Caliper Inductive System IP67, 0.01mm Resolution, Three-Point Measurement, Supplied Calibrated with Certificate - Metav IndustryLine
Take advantage of high industrial reliability with the combination of 0.01 mm resolution, IP67 protection and an inductive measuring system for consistent workshop throughput; order via Metav Werkzeuge or contact our consultants for tailored advice. Digital caliper M216.183 — 300 mm, IP67 inductive system (Metav IndustryLine) The Digital caliper M216.183 is a robust 300 mm precision measuring instrument designed for standard workshop metrology and production quality control. Inductive measuring system, DIN 862 compliant 300 mm measuring range for standard workshop use IP67 dust and water protection for harsh environments Stainless hardened steel construction with locking screw Built for dependable, reproducible measurements on the shop floor The instrument uses an inductive system that resists contamination and provides a stable signal for reliable readings; combined with the 0.01 mm resolution this reduces rework and inspection time by delivering repeatable data on each measurement cycle. Conformity with DIN 862 ensures the caliper meets recognised workshop standards, while the IP67 rating protects the electronics during everyday exposure to coolant, chips and dust. The result is a measuring tool that supports faster decision-making on the production line and fewer measurement-related stoppages. Practical handling for multiple measuring tasks Designed as a universal workshop tool, the caliper supports 4‑fold measurement (internal, external, depth and step), so both small components and assembly features can be checked with the same instrument. The MODE mm/inch display and clear digital readout simplify unit conversion and reduce reading errors; a dedicated 0/ON/OFF function speeds start-up and conserves battery life. A locking screw secures the slider for transfer measurements, enabling accurate comparison checks and gauge-setting without slippage. Durable construction that suits everyday industrial use Made from stainless hardened steel, the caliper balances stiffness and corrosion resistance for long-term dimensional stability. At approximately 0.6 kg, the instrument remains manageable in hand while offering the mass and rigidity needed for consistent contact during measurements. As part of the Metav IndustryLine, the tool benefits from a distribution and quality filter based in Emmerich, reflecting the company’s commitment to making precise measuring technology accessible for workshops and industry alike. For reliable workshop measurement choose the Metav IndustryLine digital caliper M216.183 — contact Metav Werkzeuge in Emmerich for product guidance at info@metav-werkzeuge.com or call +49 2822 7131930 for further assistance Technical data Article number: M216.183 GTIN: 4054469146355 Manufacturer: Metav IndustryLine Standard: DIN 862 Core technical data Measuring range: 0–300 mm Resolution: 0.01 mm / 0.0005 in Weight: 0.6 kg Protection class: IP67 Measuring system: inductive Reading/display: MODE, mm/inch, 0/ON/OFF Jaws length: 60/26 mm 4‑fold measurement: internal, external, depth, step Special features Material: stainless hardened steel Locking screw Digital display Norm: DIN 862 FAQ What accuracy and resolution does this caliper provide? The digital caliper M216.183 offers a resolution of 0.01 mm (0.0005 in) and is designed to meet the expectations of DIN 862 for standard workshop measurements. Can this caliper be used in humid or contaminated environments? Yes. The IP67 protection rating and the inductive measuring system make the instrument robust against dust and temporary immersion, suitable for many workshop conditions. Which measuring functions are supported? The caliper performs internal, external, depth and step measurements (fourfold measurement), allowing multiple inspection tasks with a single instrument. How are units switched and readings managed? Unit selection is handled via the MODE function for mm/inch and the digital display includes a 0/ON/OFF key for quick zeroing and power control. Is the caliper suitable for daily production use? The M216.183 is built for standard workshop use with a 300 mm measuring range, hardened stainless construction and a locking screw for stable transfer measurements, making it well suited to routine production checks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
300mm Digital Caliper Inductive System, IP67, Data Output Bluetooth, 0.01mm Resolution, Four-Point Measurement, Hardened Stainless Steel, Case - Metav IndustryLine
Robust IP67 protection, an inductive measuring system and Bluetooth data transfer combine to deliver precise, traceable measurements and efficient data capture for standard workshop applications; order or consult the specialists at Metav Werkzeuge for procurement and application advice. Digital Caliper 300 mm — Metav IndustryLine, IP67 and Bluetooth The Digital Caliper 300 mm is a workshop-grade, inductive precision caliper designed for machine shops, quality control and assembly work where reliable measurements and digital data transfer are required. Inductive measuring system DIN 862 Resolution 0.01 mm / 0.0005 in IP67 protection for harsh environments Bluetooth data output for traceable transfer Consistent precision for everyday quality control The caliper uses an inductive measuring system compliant with DIN 862, offering a resolution of 0.01 mm (0.0005 in) that meets common industrial expectations for digital calipers up to 300 mm. This electronic measuring instrument provides stable readings for routine dimensional checks, while the standardised specification supports reproducible results in serial inspection. The built-in locking screw and hardened sliding surfaces reduce measurement variation caused by handling, improving the reliability of each captured value. Fast, traceable data flows that reduce processing time Equipped with Bluetooth data output and a clear digital display featuring MODE, mm/inch and 0/ON/OFF controls, the caliper enables direct transfer of measured values into inspection software or spreadsheets, eliminating manual transcription and its associated errors. The unit supports the four common measurement modes — inside, outside, depth and step — so data capture can be standardised across different measurement tasks. Integrating the caliper into a digital workflow accelerates documentation and supports traceability in batch production. Built for workshop roughness and ergonomic handling Constructed from hardened stainless steel, the instrument withstands everyday shop use while remaining easy to operate; the weight of 0.6 kg and the jaw geometry (60/26 mm) balance stiffness and manoeuvrability for handheld measurements. With an IP67 rating, the device tolerates dust ingress and temporary immersion, making it suitable for undemanding wet or oily environments often encountered on production floors. Classified as a Standard caliper (measuring range up to 300 mm), it offers the best compromise between reach and rigidity for general mechanical engineering tasks. Practical conformity and workflow advantages Compliance with DIN 862 ensures the caliper fits established inspection routines and is compatible with common measurement standards. The inductive system minimises signal drift and supports repeatable readings during cyclic checks. Bluetooth-enabled data output simplifies logging and audit trails, which is particularly valuable for quality control departments aiming to reduce non-value-adding steps. Together, these attributes boost efficiency and support decision-making based on verifiable measurements. For tailored advice or to procure the Metav IndustryLine Digital Caliper M216.188, contact Metav Werkzeuge in Emmerich — specialists are available to discuss integration into existing measurement processes and to ensure the right configuration for the intended application. Technical data Article number: M216.188 GTIN: 4054469146393 Manufacturer: Metav IndustryLine Standard: DIN 862 Facts Measuring range: 0–300 mm Resolution: 0.01 mm / 0.0005 in Weight: 0.6 kg Jaw length: 60/26 mm Protection class: IP67 Special features Inductive measuring system Digital display with MODE, mm/inch, 0/ON/OFF Bluetooth data output Four measurement functions: inside, outside, depth, step Locking screw Hardened stainless steel construction FAQ What measuring range and resolution does the caliper offer? The Metav IndustryLine digital caliper provides a measuring range of 0–300 mm with a resolution of 0.01 mm (0.0005 in), suitable for standard workshop and quality-control tasks. Is the instrument suitable for damp or dusty workshop environments? Yes, the caliper carries an IP67 rating, ensuring resistance to dust ingress and temporary immersion, which supports use in wet or oily production settings. How are measured values transferred to documentation systems? Measured values are transmitted via Bluetooth from the Metav IndustryLine caliper, enabling direct capture into inspection software or spreadsheets for traceable records. Which measurement modes are supported by this caliper? The device supports the four common measurement modes — inside, outside, depth and step — allowing versatile application across typical measurement tasks. What standards and construction ensure long-term stability? Constructed from hardened stainless steel and designed to DIN 862, the caliper combines robust materials with an inductive measuring system to deliver stable, repeatable readings. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
300mm Digital Caliper Large LCD Display mm/inch Reset, USB Output, CR2025 Battery, Depth Rod, Lock Screw, DIN 862 - Filetta
Take advantage of precise workshop measurement with fast data transfer and a clear display: the Filetta digital caliper combines 0–300 mm measuring range, 0.01 mm resolution and USB output for streamlined quality control. The robust depth gauge and locking screw support repeatable measuring routines. Order the Filetta digital caliper M909.442 directly via Metav Werkzeuge or ask our consultants if needed. Filetta Digital Caliper M909.442 — 0–300 mm, 0.01 mm resolution, USB A Filetta Digital Caliper M909.442 designed for general machine‑shop and metrology tasks, offering digital readout, depth‑gauge functionality and standard workshop reach Large LCD with mm/inch display USB data output for digitisation Resolution 0.01 mm, DIN 862 compliant Depth gauge and locking screw included Reliable accuracy for everyday inspection tasks This caliper delivers a 0.01 mm resolution combined with compliance to DIN 862, making it suitable for standard quality control in mechanical workshops and machine construction. The measurement range of 0–300 mm positions the instrument in the standard class, which balances reach and rigidity for most workshop components. The large LCD provides a clear numeric readout including mm/inch switching and a reset function, reducing interpretation errors and accelerating inspection cycles. As a result, inspection throughput increases without compromising documented repeatability. Faster data capture and fewer transcription errors Equipped with USB data output and a conventional power source (1 × CR2025), the instrument enables direct transfer of readings to inspection software or spreadsheets, eliminating manual entry and associated mistakes. The slide includes a locking screw and a 60 mm jaw length to ensure stable clamping during measurement, while the integrated depth gauge and step measurement features increase functional versatility. These attributes reduce process steps and support traceable digital workflows in production and assembly environments. Built for workshop routine and robust handling Designed for everyday use, the caliper combines ergonomic handling with practical features that matter on the shop floor: a tactile slide, intuitive buttons (on/off, mm/inch, reset) and a large LCD for quick checks. The 0–300 mm range is recognised as the universal workshop basis, offering good stiffness for hand measurements across parts, fixtures and housings. The instrument is ideal where a reliable, easy‑to‑read measuring tool with data output is required, and it integrates simply into inspection protocols and documentation practices. The model M909.442 is a practical choice for teams seeking consistency and digital traceability. Contact Metav Werkzeuge in Emmerich for tailored advice, availability and to secure Filetta digital calipers with dependable delivery from a European precision partner Technical Data SKU: M909.442 GTIN: 4061905448843 Manufacturer: Filetta Standard: DIN 862 Facts Measuring range: 0–300 mm Resolution: 0.01 mm Jaw length: 60 mm Power supply: 1 × CR2025 battery Data output: USB Special features Large LCD display with on/off, mm/inch and reset buttons Depth gauge and step measurement Locking screw for repeatable readings Digital instrument (no ABS absolute system) Compliant with DIN 862 FAQ How precise is the measurement with this caliper? The Filetta digital caliper offers a resolution of 0.01 mm and is manufactured to meet DIN 862 requirements, making it suitable for standard workshop and machine‑shop quality checks. Can readings be exported directly to a PC or QC system? Yes, the caliper supports USB data output so measurements can be captured electronically and imported into inspection software or spreadsheets for documentation. What power source does the caliper use and how is the display operated? The instrument uses a single CR2025 battery and features a large LCD with on/off, mm/inch selection and a reset button for straightforward operation. Is the instrument suitable for depth and step measurements? Yes, the caliper includes an integrated depth gauge and step‑measurement capability, expanding its use beyond external and internal measurements. Which measuring range classification does this caliper belong to? With a 0–300 mm range, the caliper falls into the standard category, which is the universal workshop basis for machine and metalworking tasks. Manufacturer / Responsible: Schut Geometrische Meettechniek bv; Duinkerkenstraat 21; 9723 BN Groningen; The Netherlands; +31 50 5877877; schutnl@schut.com
300mm Digital Caliper Large LCD, Removable Drive Roller, Metal Housing, DIN 862, Four-Function Measurement, Supplied in Case - Metav IndustryLine
Take advantage of precise, workshop-ready measuring: the combination of a stainless, hardened construction, a large LCD with practical control keys, and a removable drive roller ensures reproducible results and flexible handling for everyday production control. Order the digital caliper directly via Metav Werkzeuge or ask our consultants for application advice. Digital Caliper M216.127.N — 300 mm, stainless steel, removable roller (Metav IndustryLine) The Digital Caliper M216.127.N is a 300 mm workshop caliper designed for general machining and quality control, compliant with DIN 862 and equipped for digital data transfer. Large LCD with ON/OFF, ZERO, UNIT, HOLD keys Hardened stainless steel construction Removable drive roller for flexible measuring Four measurement functions for versatile use Reproducible accuracy for routine quality checks The caliper delivers a balanced mix of rigidity and reach that suits everyday machine‑shop tasks. Classified in the Standard range (0–300 mm), it offers the best compromise between measuring span and stiffness, which makes it ideal for 150/200/300 mm workshop practice. The hardened stainless steel beam and a glass slide ensure low wear and consistent guidance over repeated measurements, while the large LCD and tactile control keys simplify read‑out and setting of zero or units. These attributes reduce operator influence and support reliable process control on a production line. Robust design that stands up to workshop use Built with electronics enclosed in a metal housing, the instrument tolerates the demands of a busy bench without compromising functionality. The removable drive roller, supplied with the matching piece, allows the caliper to be used with or without the roller depending on the measuring task, adding handling flexibility for awkward geometries. The combination of sturdy materials and practical design means fewer interruptions for repairs and a lower total cost of ownership for production environments where durability matters. Streamlined data capture for traceability and inspection Equipped with a dedicated RB 5 data output, the caliper supports direct transfer of measured values into inspection software or a data logger, which accelerates documentation and reduces transcription errors. The digital interface, together with practical functions such as HOLD and unit selection, enables concise measurement routines and clear pass/fail decisions. For workshops aiming to tighten quality procedures, this connectivity simplifies logging and shortens inspection cycles while maintaining compatibility with established metrology workflows. Contact Metav Werkzeuge in Emmerich for tailored advice and supply of the Metav IndustryLine digital caliper M216.127.N — technical consultation and delivery arranged from our Emmerich location Technical data Article number: M216.127.N GTIN: 4054469159690 eClass: 21170344 Customs tariff number: 90173000 Standard: DIN 862 Key figures Measurement range: 0–300 mm Power supply: 3 V Data output: RB 5 Digital display functions: ON/OFF, ZERO, UNIT, HOLD System: digital caliper Special features Material: hardened stainless steel Scale: glass slide Electronics: metal housing Removable drive roller; matching piece included Four measurement functions: inside, outside, depth, step Large LCD display Jaw length: 60/26 mm Compliance: INOX FAQ Is the caliper suitable for workshop use on metal components? Yes. The Metav IndustryLine digital caliper M216.127.N is designed for workshop use and its hardened stainless steel construction is suitable for measurement of metal components in routine production checks. Can measured values be transferred to inspection software? Yes. The caliper provides an RB 5 data output for connection to data loggers or inspection systems, enabling direct transfer of readings from the Metav IndustryLine instrument. Which measurement tasks are covered by the instrument? The device supports four measurement functions — inside, outside, depth and step — which makes the caliper versatile for typical workshop measurements and fixture checks. What power source does the caliper use and how are controls arranged? The caliper operates from a 3 V supply and features a clear LCD with ON/OFF, ZERO, UNIT and HOLD keys for straightforward operation of the Metav IndustryLine digital caliper. Does the instrument conform to a recognised standard? Yes. The caliper is manufactured to DIN 862, which defines the general requirements and verification for calipers used in workshop and inspection environments. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
300mm Digital Caliper Removable Roller, 4-Function Measurement, DIN 862, Stainless Hardened Scale, Case Included - Metav IndustryLine
Take advantage of a precise 300 mm digital caliper with a hardened stainless steel construction and removable roller for flexible reach; the combination of robust materials, clear digital functions and DIN 862 compliance supports reliable, repeatable measurements in everyday workshop environments. Order the instrument directly via Metav Werkzeuge or consult our advisors for application guidance. Digital Caliper M217.067.N – 300 mm, hardened stainless steel with removable roller (Metav IndustryLine) The Digital Caliper M217.067.N is a workshop-grade measuring instrument designed for general machine and metalworking tasks, providing straightforward linear measurement with practical digital controls and a glass-guided scale. 300 mm measuring range, workshop standard Hardened stainless steel with glass scale Removable roller for extended reach Digital display with ON/OFF, ZERO, UNIT, HOLD Reliable measurements for everyday workshop tasks This instrument is classified as a standard caliper (measuring range up to 300 mm), which offers an optimum balance of reach and rigidity for most machine‑shop and metalworking applications. The design supports four-way measurement — external, internal, depth and step — enabling inspection of components, fixtures and assemblies without changing tools. The combination of a clear display and straightforward controls simplifies repetitive checks, reducing cycle time in routine quality control while keeping measurement workflows efficient and transparent. Durable construction reduces maintenance and drift Built from hardened stainless steel with a glass-guided scale, the caliper resists wear and maintains alignment across prolonged use, which lowers recalibration frequency and downtime. The robust jaw geometry and measured weight ensure stable handling for consistent results when measuring workpieces or gauge blocks. Compliance with DIN 862 gives a recognised benchmark for mechanical caliper design and performance, helping to integrate the instrument into established inspection processes with confidence. Practical digital functions for accurate readouts Equipped with a digital module that includes ON/OFF, ZERO, UNIT and HOLD controls, the caliper supports quick zeroing and unit switching for rapid inspection tasks. The device also offers an RB 5 data output for process documentation or connection to data collection systems where required. These features streamline data capture and traceability in production or laboratory environments and reduce transcription errors that can occur with manual recording. Efficient choice for mixed workshop environments The removable roller expands practical reach for measurements that require additional clearance without committing to a longer fixed beam, maintaining the benefits of a compact caliper when not needed. The instrument’s finish and guidance system suit regular use in industrial settings where a balance of durability and handling is essential. Selection of this Metav IndustryLine caliper supports a pragmatic approach to everyday metrology: consistent, easy to use and engineered for routine accuracy. For reliable workshop metrology, request the Metav IndustryLine Digital Caliper M217.067.N via Metav Werkzeuge and contact our consultants at info@metav-werkzeuge.com or +49 2822 7131930 for specific application advice Technical data Article number: M217.067.N GTIN: 4054469159638 Norm: DIN 862 Label: Digital-Messschieber, 300 mm, Rolle abnehmbar, 3 V DIN 862 Numbers / Core technical data Measuring range: 0–300 mm Weight: 0.7 kg Battery: 3 V Jaw length: 60/26 mm Special features / Versions Material: hardened stainless steel, scale with glass slide Measurement modes: external, internal, depth, step (four-way measurement) Digital display functions: ON/OFF, ZERO, UNIT, HOLD Data output: RB 5 Removable roller for extended reach Category: caliper (Messschieber) FAQ What measurement tasks can be handled with this caliper? The instrument performs external, internal, depth and step measurements, so it covers common inspection tasks for components, fixtures and assemblies encountered in machine and metalwork. Is the caliper suitable for general workshop and inspection use? Yes. As a standard caliper with a 0–300 mm range, the Metav IndustryLine caliper meets the typical needs of machine shops and quality departments where reach, stiffness and one-handed operation are required. How is wear resistance ensured in daily use? Hardened stainless steel construction together with a glass-guided scale preserves alignment and reduces wear, supporting long-term repeatability and fewer service intervals. Can measurement data be exported for documentation? The caliper is fitted with an RB 5 data output, enabling connection to downstream data collection or SPC systems where supported. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
300mm Digital Caliper With Five Pairs Of Measuring Inserts And 30mm Setting Ring, Stainless Hardened, Case - Metav IndustryLine
Combine reliable 0.01 mm resolution, a 300 mm measuring range and hardened stainless‑steel construction for repeatable shop‑floor accuracy; order the caliper directly via Metav Werkzeuge or consult our specialists for application advice. Digital‑Uni Caliper 300 mm — Digital caliper with 0.01 mm readability and hardened stainless steel (Metav IndustryLine) The Digital‑Uni Caliper 300 mm is a compact digital caliper designed for workshop and inspection tasks, enabling fast internal, external, depth and step measurements across a typical machine‑shop measuring range. Digital display with ON/OFF and SET/PRESET 0.01 mm readability for precise measurements Includes five pairs of measuring inserts Hardened stainless steel construction Precise measurement where it matters The caliper delivers 0.01 mm readability via a clear digital display, which supports ON/OFF and SET/PRESET functions for quick reference and repeatable zeroing. With a measuring range up to 300 mm, this model falls into the standard caliper class used across machine shops and metalworking for a balance of reach and rigidity. The numeric resolution and compact slider reduce reading errors compared with non‑digital vernier units, making it suitable for routine quality checks and faster incoming‑inspection workflows. Built for dependable shop performance Constructed from hardened stainless steel, the device is dimensionally stable and resistant to corrosion, ensuring measurement stability over time. The set includes a 30 mm setting ring and a selection of measuring inserts that extend the instrument’s versatility: groove inserts (flat and round), an insert for external checks, an insert for M2.5 thread measurements and a dedicated insert for pipe‑wall or bore diameter assessment. Delivered in a transport case, the caliper and accessories are protected during shipment and storage, which helps maintain calibration and reduces handling damage. Practical benefits for process control and traceability The instrument supports common shop procedures: rapid presetting speeds up batch checks, while the clear readout reduces transcription mistakes. The package contents allow precise measurement of profiles, bores and threads without frequent tool changes, improving throughput and lowering the risk of rework. For quality documentation, the stable measuring behaviour of the unit assists in consistent pass/fail decisions on the production line and in goods receipt inspections. Choose the Metav IndustryLine digital caliper for reliable workshop measurements — contact Metav Werkzeuge for tailored advice and fast delivery from Emmerich to your bench Technical Data Article number: M240.281 GTIN: 4061905053795 Brand: Metav IndustryLine Facts Measuring range: 0–300 mm Readability: 0.01 mm Weight: 1.25 kg Display: Digital with ON/OFF and SET/PRESET Special features Material: hardened stainless steel Included accessories: 1x caliper, 1x 30 mm setting ring, measuring inserts for grooves (flat and round), insert for external measurement, insert for M2.5 thread, insert for pipe‑wall/bore measurement Suitable for internal, external, pipe‑wall and bore diameter measurements Delivered in a transport case FAQ Is the caliper suitable for internal and external measurements? Yes. The Digital‑Uni Caliper 300 mm is specified for internal and external measurements and includes dedicated inserts for groove, bore and external checks to extend measurement capability. What resolution and repeatability can be expected? The instrument provides 0.01 mm readability on its digital display, appropriate for standard workshop quality control across the 0–300 mm range. Are the additional measuring inserts included? Yes. The set contains a selection of measuring inserts and a 30 mm setting ring as listed in the product contents to support varied measurement tasks. Is the caliper corrosion resistant and durable for shop use? The caliper is made from hardened stainless steel, offering enhanced resistance to wear and corrosion for consistent use in workshop environments. Can the display be preset to a reference value for batch inspection? Yes. The digital display includes SET/PRESET functionality and an ON/OFF control for quick zeroing and repeatable reference settings. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
300mm Digital Caliper With Large LCD, mm/inch, USB Data Output, ABS Frame, CR2025 Battery - Filetta
Take advantage of a 0–300 mm measuring range, 0.01 mm resolution and USB data output for reliable workshop measurement and smooth documentation; the large LCD and ABS absolute system support fast mm/inch switching and repeatable readings. Order the Filetta caliper via Metav Werkzeuge or contact our consultants for tailored advice. Digital Caliper M909.445 — 0–300 mm, 0.01 mm resolution, USB (Filetta) The Digital Caliper M909.445 is a 0–300 mm digital caliper designed for workshop measuring and quality control, combining an ABS absolute encoder with a large LCD and USB data output for efficient measurement transfer 0.01 mm resolution for reliable readings USB data output for digital logging Large LCD display with mm/inch readout Locking screw and depth gauge included Precision and repeatability for everyday quality checks This standard-range caliper, classified for the workshop class with a measuring range up to 300 mm, delivers industrially relevant accuracy thanks to a 0.01 mm display resolution and conformity with DIN 862. The built-in ABS absolute measuring system guarantees immediate reference after switching on, eliminating cumulative zero errors commonly encountered with incremental sensors. A secure locking screw keeps the jaws fixed during transfer, which reduces handling error and increases repeatability when carrying measurements to inspection sheets or CMM inputs. Effortless data capture and traceable measurement records Engineered for straightforward documentation, the instrument features a clear large LCD with mm/inch selection and a reset function, plus USB data output for direct logging into spreadsheets or inspection software. The compact electronics are powered by a CR2025 cell and an on/off switch preserves battery life during intermittent use. This combination of readable display, simple controls and digital export supports faster traceability and reduces transcription errors in production control and incoming inspection. Robust handling and practical workshop ergonomics The slide and jaws are optimised for daily use: a 60 mm jaw length offers tactile control for both fine and general measurements, while the integrated depth gauge extends functionality to basic depth checks. The construction balances stiffness and handling, so one-handed operation remains practicable across typical workshop tasks. Compliance with workshop norms and the inclusion of a locking mechanism make this instrument a reliable choice for machinists and quality staff who need consistent, transferable results without complex setup. For precise measuring with straightforward data export, choose the Filetta caliper and order through Metav Werkzeuge — for product queries or technical clarification contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M909.445 GTIN: 4061905448874 eCl@ss: 21170344 Facts Measuring range: 0–300 mm Resolution: 0.01 mm Jaw length: 60 mm Special features Digital display: Large LCD with mm/inch and reset button Data output: USB Power: 1 × CR2025 battery Standard: DIN 862 Absolute measuring system: ABS Locking screw included Depth gauge integrated FAQ What measurement accuracy can be expected from this caliper? The Filetta digital caliper M909.445 has a display resolution of 0.01 mm; for the 0–300 mm range the practical error band aligns with the DIN 862 expectations for standard digital calipers (commonly ±0.03 mm), making it suitable for routine workshop and inspection tasks. Can measurement data be transferred to a PC or data logger? Yes. The caliper provides a USB data output that enables direct transfer of readings into spreadsheets or inspection software for documentation and statistical process control. Which measurement types are supported by the tool? The instrument covers external and internal dimension checks and includes an integrated depth gauge for depth measurements, providing the basic measurement functions required in general workshop inspection. Does the caliper meet recognised standards? The M909.445 is specified to meet DIN 862, which defines the requirements for vernier and digital calipers used in machining and quality inspection. What power source does the caliper use and how is power managed? The unit is powered by a single CR2025 battery and features an on/off switch to conserve energy between uses. Manufacturer / Responsible: Schut Geometrische Meettechniek bv; Duinkerkenstraat 21; 9723 BN Groningen; The Netherlands; +31 50 5877877; schutnl@schut.com
300mm Digital Caliper With Removable Drive Roller, Preset Buttons, Three-Point Measurement, DIN 862, Supplied In Case - Metav IndustryLine
Take advantage of precise workshop measurement with the preset digital function, a removable drive roller for flexible handling and a hardened stainless steel construction that follows DIN 862 — order the Digital Caliper directly via Metav Werkzeuge or contact our consultants for application advice. Digital Caliper M216.127.P — 300 mm preset with removable roller (Metav IndustryLine) the Digital Caliper M216.127.P is a 300 mm workshop caliper with preset buttons and a removable drive roller, designed for reliable shop‑floor measurement and quality control 300 mm measurement range (standard workshop) Removable drive roller for flexible use Hardened stainless steel frame with glass scale Preset function with SET/PRESET and ON/OFF Reliable accuracy for everyday quality control The caliper offers a 300 mm range that places it in the standard class for machine and metalworking shops, providing the best balance between reach and stiffness for common tasks. As a digital instrument, it operates on a 3 V power system and uses a conventional display configuration with ON/OFF and SET/PRESET keys, enabling quick zeroing and presetting for repetitive checks. Combined with the hardened stainless steel frame and a glass scale, this design reduces wear and keeps measurement stability over repeated use, so routine inspection and assembly work proceed with fewer interruptions. Flexible measuring modes for complete part inspection Equipped for 4‑fold measurement, the caliper supports inside, outside, depth and step measurements, which makes it suitable for a wide range of inspection tasks without changing tools. The included removable drive roller provides an alternative measuring interface for cylindrical and stepped parts, enabling smoother travel on long runs and easier handling when measuring curved surfaces. The preset capability simplifies batch checks: set the reference once and record repeated results consistently, which reduces operator influence and streamlines process control. Robust construction and secure electronics The combination of a hardened stainless steel body, a glass scale and electronics housed in a metal casing protects the instrument in demanding workshop environments. These materials balance durability with dimensional stability; the metal electronic housing shields the sensor from mechanical damage and helps dissipate heat, while the glass scale maintains readable graduation lines. The caliper’s mechanical design — including specified jaw lengths — supports reproducible contact geometry and long service life under normal industrial use. Practical interfacing and documentation The instrument provides a data output RB 5, allowing connection to data collection systems where required. For routine documentation and integration into inspection workflows this output enables fast transfer of measured values into SPC or reporting software. The preset and digital readout speed up setup and reduce transcription errors, supporting a leaner inspection routine and improving traceability in production reporting. Discuss application needs with Metav Werkzeuge GmbH in Emmerich or request product matching for specific assemblies via info@metav-werkzeuge.com / +49 2822 7131930 Technical Data Article number: M216.127.P GTIN: 4054469167909 Label: Digital caliper, 300 mm, preset, removable roller, 3 V with preset buttons Brand: Metav IndustryLine Facts Measuring range: 0–300 mm Weight: 0.7 kg Measuring jaw lengths: 60 mm / 26 mm Power supply: 3 V Customs tariff number: 90173000 Special features Hardened stainless steel body Glass scale Electronics in metal housing Preset function with SET/PRESET and ON/OFF Removable drive roller included Data output: RB 5 Conforms to DIN 862 4‑fold measurement capability (inside, outside, depth, step) FAQ What measurement range does this caliper cover? The caliper covers a measuring range of 0–300 mm and is classified as a standard workshop caliper suitable for most machine‑shop tasks. Does the caliper support inside and depth measurements? Yes. The instrument offers 4‑fold measurement: inside, outside, depth and step measurements are all supported by the caliper’s design. How does the preset function improve inspection work? The preset (SET/PRESET) keys allow a reference value to be stored so repeated checks are faster and more consistent; the preset function on the M216.127.P reduces setup time and operator variation. Is the drive roller included and removable? A removable drive roller is supplied as part of the delivery and can be fitted or removed depending on the measuring task to improve handling of cylindrical or stepped surfaces. What materials protect the measuring components? The caliper uses a hardened stainless steel body and a glass scale, with the electronics mounted in a metal housing to enhance robustness and dimensional stability. Can measured values be exported to a PC or data system? Yes. The caliper provides a data output labelled RB 5 for connection to data acquisition systems or manual recording equipment. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
300mm Digital Precision Caliper E‑Ink 2.13" Wireless USB ISO 17025 Calibrated - Microtech Metrology
Take advantage of the combination of high measurement fidelity, effortless data transfer and full ISO 17025 traceability for consistent quality control. Order the Precision Caliper directly via Metav Werkzeuge or consult their specialists for application advice. Precision Caliper 141093030F — E‑Ink 2.13" display, Wireless + USB Precision Caliper 141093030F is a digital measuring instrument for workshop and laboratory use, offering a 300 mm measuring range and rugged, workflow-friendly integration. E‑Ink 2.13" display for clear readings Wireless and USB data output for integration Calibrated to ISO 17025 with certificate included Dual measuring force 8N external / 4N internal High-accuracy measurement that fits the workshop The caliper belongs to the Standard (0–300 mm) class, which balances reach and stiffness for general machining and metalworking. With a specified accuracy of 0.015 mm and a readout increment of 0.005 mm, the instrument delivers reproducible results suitable for incoming inspection and assembly tasks. The combination of fine resolution and a repeatable contact regime reduces rework and supports process control; the dual measuring force (8N external / 4N internal) helps maintain consistent contact pressure for external and internal dimensions. Fast data capture and integration for efficient processes Equipped with both Wireless and USB data outputs, the caliper simplifies data collection and traceability in digital production environments. The E‑Ink display provides excellent legibility under workshop lighting while keeping power consumption low, which extends time between battery changes and reduces downtime. Seamless transfer of measured values into inspection software or spreadsheets supports quality documentation and speeds up reporting, making the tool a practical choice for structured measurement chains. Calibrated traceability for compliance and confidence The instrument is supplied fully calibrated to ISO 17025 and includes a calibration certificate, ensuring traceability and acceptance in regulated environments. This level of documentation supports internal audits and supplier qualification processes and demonstrates that measurement results meet recognised laboratory standards. The calibration status and certificate reduce administrative effort when integrating the instrument into formal quality systems. Purposeful design for everyday use Beyond numerical performance, the caliper is engineered for routine handling: a robust slide and ergonomic jaws allow stable measurements, while the integrated depth measurement function extends usability to groove and step inspection. The digital interface and clear display shorten measurement cycles and lower the risk of reading errors — a pragmatic contribution to throughput and operator confidence in serial checking tasks. For precise and traceable measurement workflows, contact Metav Werkzeuge for ordering and technical guidance on the Microtech Metrology Precision Caliper 141093030F — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitability for specific applications or integration into inspection routines. Technical data Article number: 141093030F GTIN: 4061905455438 Brand: Microtech Metrology Facts Measuring range: 0–300 mm Accuracy: 0.015 mm Readout increment: 0.005 mm Display: E‑Ink 2.13" Measuring force: 8 N external / 4 N internal Data output: Wireless + USB Digital instrument: yes Special features Calibrated to ISO 17025 with calibration certificate included Depth measurement function integrated Category: Standard (0–300 mm) for workshop and machine shop use Low-power E‑Ink display for long battery life Designed for reproducible contact pressure and stable readings FAQ What measuring range does the caliper cover? The caliper covers a measuring range of 0–300 mm, placing it in the Standard class for general machine‑shop and workshop tasks. Is the instrument delivered calibrated? Yes. The caliper is delivered fully calibrated to ISO 17025 and includes a calibration certificate for traceability. How are measured values exported? Measured values can be exported via Wireless connection or USB for direct transfer into inspection software or spreadsheets. What level of accuracy can be expected in routine use? The instrument specifies an accuracy of 0.015 mm with a readout increment of 0.005 mm, providing reliable results for standard quality control tasks. Does the caliper support depth measurements? Yes. The unit includes an integrated depth measurement function for grooves and steps. Manufacturer / Responsible: Microtech, Nizhneyurkovska str., 45a, 04080 Kyiv, Ukraine, tool@microtech.tools
300mm Digital Precision Caliper With Depth Rod, 0.01mm Resolution, Battery CR2032, Supplied In Case - Filetta
Combine 0.01 mm resolution, a 0–300 mm measuring range and a clear mm/inch display for dependable workshop measurement. The compact design with a 60 mm jaw length and locking screw delivers consistent results for everyday quality control. Order the Filetta MS910.466 digital caliper directly via Metav Werkzeuge or consult the specialists for application advice. Filetta MS910.466 Digital Precision Caliper — 300 mm, 0.01 mm resolution The Filetta MS910.466 is a digital precision caliper for workshop and quality control tasks, offering a 300 mm measuring range with metric/imperial readout for versatile part inspection. *Digital display with mm/inch and reset *300 mm measuring range for workshop tasks *Resolution 0.01 mm, accuracy ±0.03 mm Reliable reach and workshop grading The 300 mm range places this instrument in the Standard class for calipers, providing a practical balance between reach and rigidity that suits general machine‑shop and metalwork applications. Shorter, stiff jaws reduce bending and ensure repeatable external measurements; the 60 mm jaw length is specified for firm clamping on typical components. The integrated locking screw secures the slide for stable transfers and repeat checks, supporting a steady production workflow. Precise digital readout and documented accuracy Equipped with a 0.01 mm display step and an overal declared accuracy of ±0.03 mm, the instrument meets the expectations of standard workshop metrology up to 300 mm. The readout can be switched between mm/inch, and the simple on/off/reset controls keep operation straightforward. Stating resolution and accuracy in this way clarifies measurement capability: resolution indicates the smallest increment shown, while accuracy defines the expected deviation under normal use. Practical measurement functions and handling aids A dedicated depth gauge extends functionality beyond simple external checks, enabling reliable depth measurements from faces and bores. The thumb wheel drive provides smooth, controlled sliding for fine positioning, while the locking screw fixes the slider during transfer or when repeating a measured value. The instrument is therefore well suited to routine inspection tasks, bench setups and assembly checks where straightforward handling reduces cycle time. Low‑maintenance power and shop readiness Power is supplied by a single CR2032 battery that is widely available and user‑replaceable, keeping downtime minimal. The electronic module is optimised for low consumption, and the clear digital display simplifies readings in busy workshop environments. Together with the robust drive and clamp features, this caliper is designed for dependable daily use in production and service contexts. For precise measurement tasks choose the Filetta MS910.466 — contact Metav Werkzeuge to arrange supply or to discuss application suitability via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data SKU: MS910.466 Brand: Filetta Product type: Digital precision caliper Key figures Measuring range: 0–300 mm Resolution: 0.01 mm Accuracy: ±0.03 mm Jaw length: 60 mm Battery: 1x CR2032 Features Digital display with mm/inch, on/off, reset Depth gauge present Locking screw Thumb wheel drive Digital operation FAQ What is the measuring range of the Filetta MS910.466? The Filetta MS910.466 provides a measuring range of 0–300 mm suitable for standard workshop and quality‑control tasks. What resolution and accuracy does the caliper offer? The instrument has a display resolution of 0.01 mm and a declared accuracy of ±0.03 mm for measurements within its 300 mm range. Which measurement types are supported by this caliper? The Filetta MS910.466 performs external and internal measurements with the jaws and includes a depth gauge for depth measurements. What power source does the MS910.466 use? Power is supplied by a single CR2032 battery, which is user‑replaceable. Is the display metric and imperial capable? Yes, the caliper’s digital display can toggle between mm and inch and features on/off and reset controls. Is this caliper suitable for general machine‑shop use? Classified as a Standard range caliper (up to 300 mm), the Filetta MS910.466 is designed for workshop use, offering a balance of reach, stiffness and practical handling features. Manufacturer / Responsible: Schut Geometrische Meettechniek bv; Duinkerkenstraat 21; 9723 BN Groningen; The Netherlands; +31 50 5877877; schutnl@schut.com
why digital calipers accelerate accurate measurement
A digital caliper is a precise length-measuring instrument that captures measurements electronically and shows them on an LCD display, making read‑out immediate and error‑free. Compared with analogue calipers it delivers higher accuracy, faster operation and the option to store or transfer measurements, which speeds up inspection and reduces rework. Metav supplies digital calipers from leading manufacturers, ready for industry, workshop and laboratory use.
how digital calipers are used in industrial settings
Digital calipers work by converting linear displacement into an electronic signal via a capacitive sensor, with a clear LCD display and a zero function at any position. Many models allow switching between mm/inch and provide data output for direct integration into measurement systems. Construction in stainless steel and optional protection ratings such as IP54 make them robust enough for shop‑floor tasks. Typical measuring ranges include 0–150 mm and 0–300 mm, covering most component inspection needs.
key performance benefits that improve your workflow
- Rapid, error‑free readings thanks to the LCD display and direct digital output, reducing inspection time.
- Consistent repeatability with a resolution commonly of 0.01 mm, which minimises corrective work.
- Flexible operation with zero at any position and quick conversion between mm/inch, speeding setup and measurement changes.
- Durable design (stainless steel housing, optional IP54) for low maintenance and long service life.
- Seamless data handling where data output is available, enabling faster documentation and process control.
metav industryline and chosen manufacturers as practical options
Metav IndustryLine provides precise, dependable measuring tools designed for everyday use in production and quality assurance. For users seeking cutting‑edge electronics and enhanced connectivity, Microtech offers innovative digital calipers with advanced data features; Filetta supplies robust, economical alternatives for routine workshop tasks. Metav combines its product range with local stock and expertise: more than 48,000 customers trust Metav, and the company offers over 250,000 products from its Emmerich location, acting as a quality filter for the european market.
concise summary
digital calipers deliver fast, repeatable and easily transferable measurements for metalworking, plastics and electronics, with common specifications such as 0.01 mm resolution, 0–150 mm / 0–300 mm ranges and data output options. Metav’s range, including Metav IndustryLine, Microtech and Filetta, covers both high‑precision and cost‑effective needs.
FAQ
what measuring range should i choose for digital calipers?
Choose the measuring range based on the largest dimension you need to check; common options are 0–150 mm for general components and 0–300 mm for larger parts. digital calipers with an appropriate range avoid unnecessary repositioning and speed up inspection.
how precise are digital calipers for repeat measurements?
Digital calipers typically offer a resolution of 0.01 mm and, with a capacitive sensor and solid construction, provide high repeatability suitable for quality control and assembly tasks.
can i connect digital calipers to a pc or measurement system?
Yes. Models with data output support direct transfer of measurements to a pc or data logger, simplifying traceability and statistical process control when used in inspection workflows.
are digital calipers suitable for workshop environments?
Many digital calipers feature a stainless steel housing and protection ratings such as IP54, making them durable enough for the workshop while remaining easy to maintain.
what is the difference between metav industryline, microtech and filetta calipers?
Metav IndustryLine focuses on reliable, well‑manufactured tools for everyday precision; Microtech targets advanced functionality and connectivity for demanding applications; Filetta provides robust, value‑oriented instruments for routine workshop use. Metav packages these choices with local stock and industry expertise from Emmerich.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com