Twist Drill Bits for Professionals: Quality You Can Rely On

Twist Drill — short Type N, 3.2 mm, 135°, TIN-coated, HSS-G, DIN 338 (MetavCUT Profi Line) The Twist Drill short Type N is a precision metalworking drill for Drilling Machines, designed for stable, high-performance holemaking in a wide range of metals. Short design for increased stability and precision TIN-coated surface for reduced friction and longer tool life Fully ground HSS-G for cleaner holes and faster drilling 135° point angle optimised for harder materials Complies with DIN 338 for short cylindrical shank drills Precision and efficiency for demanding metalwork The Twist Drill combines a HSS-G substrate with a fully ground geometry to deliver measurable performance benefits when machining metals. The shortened overall length and reduced overhang minimise deflection, which translates into cleaner holes and improved repeatability. Thanks to the grinding process, the flute geometry produces sharp cutting edges and excellent runout behaviour. For hard or alloyed steels the 135° point angle reduces wandering at the start of the cut and shortens the approach time, so the tool performs reliably under higher loads. Surface engineering that extends service life A TIN-coated finish lowers friction and heat generation at the cutting edge, so wear is reduced when used with appropriate cooling. The coating supports longer tool life during continuous metalworking applications and improves resistance to abrasive wear on non-ferrous materials. When combined with coolant, the Titanium Nitride layer helps maintain cutting geometry over a larger number of holes, reducing downtime for tool changes and ensuring consistent hole quality. Geometry and form for stable, accurate holes The drill’s fully ground flute geometry and short spiral length offer better centring and decreased thrust force during penetration. With a Spiral Length of 36 mm and an Overall Length of 65 mm for a 3.2 mm diameter, the construction minimises chatter and bending moments typical of longer tools. The fully ground shaft enables up to 40% faster drilling rates and requires significantly less axial force compared with conventional HSS drills, making it particularly suitable for stationary and portable Drilling Machines when precision is crucial. Who benefits and when to seek expert help This tool is aimed at professional metalworkers, tool rooms and maintenance technicians who need repeatable, high-quality bores in materials such as alloyed and unalloyed steel, cast iron, sintered metals and non-ferrous metals. If uncertainty remains about suitability for a particular application or required coolant strategy, METAV Werkzeuge provides extensive and competent advice to ensure the correct tool choice and cutting parameters. Their guidance helps avoid tool breakage and optimises process reliability. We recommend the MetavCUT Twist Drill short Type N for precision metalworking and encourage you to contact METAV Werkzeuge for personalised, expert advice — eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 | WhatsApp: +49 170 2837271 Technical details Designation: Twist Drill Marke: MetavCUT SKU: 41032-FDA Diameter: 3.2 mm Point angle: 135° Type: Type N Execution: short Colour / Coating: TIN-coated Shank execution: fully ground Spiral length: 36 mm Overall length: 65 mm Material: HSS-G Standard: DIN 338 Application: Drills for metal For Drilling Machine: Drilling Machine Model series: Profi Line Packaging unit: 10 Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What are Twist Drills mainly used for? Twist Drills from MetavCUT, short Type N, are primarily used for machining high-strength materials and for larger drill diameters; their form allows relatively easy regrinding and they withstand elevated loads, making them suitable for demanding metalworking tasks. Which three drill types exist? The three main drill categories are metal drills, wood drills and stone/concrete drills, with the MetavCUT Twist Drill belonging to the metal drill group optimised for ferrous and non-ferrous alloys. Why are Twist Drills point-ground? Point grinding reduces the cross-cut at the tip of the Twist Drill, significantly lowering friction forces and thus the required feed. This sharpening also improves centring of the drill tip in the workpiece. Can a metal drill be used in wood? A metal drill such as the MetavCUT Twist Drill can be used in wood but offers poorer guidance and a less clean result compared with wood-specific bits; however, metal drills are easier to regrind and present lower self-feed tendencies. For what drilling depths is the Twist Drill most commonly used? A through-hole in solid material is often executed with a Twist Drill; for diameters up to 20 mm and drill depths up to 100 mm the Twist Drill is the most frequently used tool. Is HSS or HSSE better? The common assumption that HSSE steels are inherently superior to standard HSS is not universally true; evaluate working conditions carefully to decide if the higher purchase cost of HSSE is justified for your application.

Twist Drill Spiralbohrer (HSS‑G, 3.2 mm, 135°, long) — MetavCUT, DIN 340, Bright Finished, Fully Ground The Twist Drill Spiralbohrer is a long HSS‑G metal drill designed for deep and hard‑material drilling with a 135° point angle for use in drilling machines. Long HSS‑G design for deep hole drilling 3.2 mm diameter for precise pilot and through holes 135° tip for improved centring in hard materials Fully ground shank for high concentricity and clean holes Deeper holes with reliable stability For tasks that require depth and precision, this long Twist Drill delivers a clear advantage. The extended overall length and longer Spiral Length allow reaching recessed or less accessible drilling points without extensions. Thanks to the HSS‑G material and DIN 340 specification, the drill maintains cutting performance when penetrating thicker sections, while the bright finished surface reduces friction. This results in fewer tool changes and consistent hole quality for metalworking operations. Designed for harder materials and fast cutting A 135° point angle reduces the initial bite and improves centring on tough substrates such as alloyed and unalloyed steel, cast materials and sintered metals. The ground geometry achieved by CNC grinding creates sharp cutting edges that contribute to up to 40% faster drilling and lower required feed force compared with conventional HSS drills. This combination supports more efficient machining and a smoother feed, especially when used with appropriate cooling. High concentricity and precise results The fully ground shank and ground flutes ensure excellent runout characteristics and produce cleaner, more accurate holes. Reduced vibration and improved concentricity protect both the tool and the workpiece, which is particularly beneficial when producing tight‑tolerance bores. Users will notice less burr formation and better surface finish, making subsequent processing steps easier and reducing rework. Practical use and target applications This Spiralbohrer is optimised for use in drilling machines and is primarily intended for metalworking: drilling in alloyed steel, cast iron, temper cast and non‑ferrous metals as well as hard plastics. The long version is especially suited to workshops and industrial settings where deeper bores are frequent. For occasional home or light workshop use, ensure appropriate clamping, speed and coolant to benefit from the drill’s properties. We recommend choosing MetavCUT tools when deep, precise metal drilling is required — for further advice METAV Werkzeuge provides expert consultation: info@metav-werkzeuge.com, Tel +49 2822 7131930, WhatsApp +49 170 2837271 Designation: Twist Drill Spiralbohrer Brand: MetavCUT SKU: 53032-FDA Diameter: 3.2 mm Overall length: 106 mm Spiral length: 69 mm Point angle: 135° Version: long Shank finish: fully ground Material: HSS‑G Standard: DIN 340 Colour: bright finished Application: Drills for metal For drilling machine: Drilling Machine Model series: Standard Line Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What materials is the Twist Drill Spiralbohrer by MetavCUT suitable for? The MetavCUT Twist Drill Spiralbohrer is intended primarily for metalworking and performs well in alloyed and unalloyed steel, Cast Steel, Gusseisen, Sintered Iron, Tempered Cast materials, non‑ferrous metals and hard plastics when used with proper machining parameters. How should the MetavCUT Twist Drill Spiralbohrer be used to maximise tool life? When using the MetavCUT Twist Drill Spiralbohrer, apply suitable cutting speeds, coolant and clamping; the fully ground HSS‑G geometry benefits from controlled feed and cooling to avoid chipping and to maintain concentricity for consistent hole quality. For what are Twist Drills used? The Twist Drill Spiralbohrer from MetavCUT is mainly used for machining high‑strength materials and large drill diameters; its shape is easy to grind and withstands higher loads. Which 3 drill types exist? Regarding common types, there are Metal drills (such as the MetavCUT Twist Drill Spiralbohrer), Wood drills, and Stone/Concrete drills.

Twist Drill (Type N) — 3.3 mm, HSS, short, 118° point, black, DIN 338 by MetavCUT A compact Twist Drill (Type N) designed for precision metalworking in hand drills and drilling machines, offering a short, stable geometry and a 118° point for reliable centring. Short HSS design for higher stability 118° point angle for improved centring Type N normal spiral optimised for metal DIN 338 specification for consistent quality Black finish with 65 mm overall length Outstanding Stability and Precision for Metalworking The Twist Drill in short HSS execution delivers enhanced stability thanks to its reduced protruding length and a stiffer design. This configuration reduces deflection during machining, resulting in cleaner holes and better repeatability when drilling metal. Short drills are particularly suitable for operations where rigidity and accuracy matter, such as jig or fixture work and reworking on portable equipment. Material and Manufacturing Advantages that Matter Manufactured from HSS (High Speed Steel) and produced according to DIN 338, this short twist drill combines toughness and wear resistance for typical metal applications. HSS offers elasticity that reduces breakage risk on small diameters and permits straightforward resharpening. The Type N normal spiral is the classic choice for steel, cast iron and non-ferrous metals, ensuring a balance between cutting action and tool life. Design Features That Improve Workflow Equipped with a 118° point angle and a conventional flute geometry, the tool provides reliable chip evacuation and easy centring on flat or slightly curved surfaces. The short overall length (65 mm) and flute length (36 mm) make the drill less prone to vibration, which shortens cycle times by reducing the need for rework. The black surface finish supports identification and handling in busy tool sets. Who Benefits Most from This Twist Drill This product is aimed at workshop professionals and maintenance technicians who require a robust, easy-to-sharpen drill for metal fabrication and repair. The combination of HSS material, Type N geometry and DIN 338 conformity makes it a practical choice for everyday metal drilling tasks on portable and stationary drilling equipment. For specialist materials or deeper holes, alternative geometries may be preferable. Strong recommendation: For reliable, precision metal drilling choose the MetavCUT Twist Drill (Type N) — METAV Werkzeuge offers expert consultation and comprehensive technical support; contact via eMail: info@metav-werkzeuge.com, Phone: +49 2822 7131930 or WhatsApp: +49 170 2837271 Designation: Twist Drill Brand: MetavCUT SKU: 40033-FDA Diameter: 3.3 mm Point Angle: 118° Type: Type N Material: HSS (High Speed Steel) Execution: short Standard: DIN 338 Colour: black Overall Length: 65 mm Spiral (Flute) Length: 36 mm Application: Drills for metal / suitable for Drilling Machine (Hand Drill) Packaging Unit: 10 Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is a Twist Drill used for and which materials suit the MetavCUT Twist Drill (Type N)? The MetavCUT Twist Drill (Type N) is primarily intended for machining metal; it is suitable for alloyed and unalloyed steel, cast iron, non-ferrous metals and many plastics. Its HSS construction provides elasticity and resistance, making it a dependable choice for standard metal drilling tasks with hand and machine tools. Which three drill types exist? Commonly distinguished drill types are metal drills, wood drills and masonry/concrete drills. The MetavCUT Twist Drill belongs to the metal drill category and is optimised for metalworking applications.

Body Drill (Karosseriebohrer) — MetavCUT HSS-G, 3.3 mm, 135° double-sided, black finished, fully ground shaft Body Drill (Karosseriebohrer) is a double-ended HSS-G Twist Drill designed for precision metal drilling in demanding applications, combining a 3.3 mm diameter and 135° point angle for reliable results in hard materials. Double-ended design for extended tool life HSS-G fully ground for precise metal holes 3.3 mm diameter with 135° point for tough steels Short robust shank for stable drilling Black finished without margin for minimal burrs Faster, cleaner holes thanks to precision ground HSS-G Because the HSS-G geometry is produced by CNC grinding rather than rolling, the drill achieves very sharp cutting edges and high run-out accuracy. This results in cleaner holes and improved surface quality when working with Steel, Cast Iron or Non-Ferrous Metals. For workshop environments where repeatable precision matters, the fully ground shank helps reduce vibration and ensures consistent centring when used with a hand or bench Drilling Machine. Double-ended design reduces downtime and material waste A double-sided configuration makes this Twist Drill effectively "two tools in one": if one tip becomes blunt, the part can be reversed to use the other end. This feature is particularly advantageous in sheetmetal and bodywork applications where quick tool changes are costly. Users benefit from longer service intervals and fewer interrupted jobs, while the short, robust form offers higher stability for drilling holes for rivets and thin-sheet fastenings. Optimised geometry for hard materials and reduced feed effort The 135° point angle is chosen specifically for harder materials, improving the initial penetration and increasing tool life under elevated loads. The specially ground geometry allows up to 40% faster drilling and requires about 50% less thrust compared with conventional HSS drills, making operations less strenuous and more efficient. For tasks requiring accurate centring and reduced burr formation, this Body Drill offers tangible productivity gains. Who benefits most — versatile use in metalworking This drill is aimed at professionals and serious hobbyists in Automotive, Fabrication and Repair workshops who need a compact, reliable Twist Drill for metal operations. The 3.3 mm diameter and 46 mm overall length make it suitable for common fastening and hole-preparation tasks in alloyed and unalloyed steel, cast materials and engineering plastics. The black finished surface reduces adhesion of chips and helps maintain cutting performance in repeated cycles. Choose the MetavCUT double-ended HSS-G Body Drill as a robust Twist Drill for precision metalwork and contact METAV Werkzeuge for personalised technical advice via info@metav-werkzeuge.com, phone +49 2822 7131930 or WhatsApp +49 170 2837271 Designation: Body Drill (Karosseriebohrer) Brand: MetavCUT SKU: 59033-FDA Material: HSS-G Diameter: 3.3 mm Point angle: 135° Overall length: 46 mm Spiral length: 10 mm Execution: double-sided Shank finish: fully ground Colour: black finished without margin For machine: Drilling Machine Application: Drills for metal Model series: Profi Line Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the MetavCUT Body Drill (Twist Drill) mainly used for? The MetavCUT Body Drill (Twist Drill) is primarily applied to machining high-strength materials and larger drill diameters; its design is suited for operations in Alloyed and Unalloyed Steel, Cast Steel, Cast Iron and Hard Plastics, where durability and precise holes are required. Which three drill types should be known for general work? For most workshops, the three basic drill categories are Metal Drills (like the MetavCUT Body Drill), Wood Drills and Masonry/Concrete Drills; each type is optimised in geometry and material for its intended substrate. Why are Twist Drills sharpened? Twist Drills are sharpened to reduce the cross-edge at the tip, which lowers friction and therefore reduces the required feed force; sharpening also improves centring and cutting efficiency so the MetavCUT Body Drill penetrates more easily and produces cleaner holes. Can you use a metal Twist Drill in wood? A Metal Twist Drill such as the MetavCUT Body Drill can be used in wood, but steering is less precise and the finish may be rougher; these drills are easier to re-sharpen and show less aggressive self-feed than specialised wood bits. For which hole depths is the Twist Drill most commonly used? A through-hole in solid material is typically made with a Twist Drill; for diameters up to about 20 mm and hole depths up to roughly 100 mm, the Twist Drill is the most frequently used tool in metalworking and maintenance tasks. Is HSS or HSSE better for workshop drills? The common belief that HSSE is always superior to HSS is not universally valid; when selecting a drill—for example the MetavCUT Body Drill in HSS-G—you should consider specific working conditions to decide whether the higher cost of HSSE is justified.

Karosseriebohrer — Body Drill (Diameter 3.3 mm · 135° Point Angle · Double-sided · Bright Finished · Fully Ground · HSS‑G) The Karosseriebohrer Body Drill is a compact Twist Drill designed for precision drilling in metal using a drilling machine, ideal for thin sheets, bodywork and industrial applications. Double-sided design for extended usability HSS‑G fully ground for precise, clean holes 135° point angle for harder materials Bright finished surface for smooth chip evacuation Faster, more controlled metal drilling for demanding tasks The fully ground HSS‑G geometry of this Body Drill delivers a noticeable increase in efficiency: compared with rolled HSS drills, the ground flute and cutting edges provide up to 40% faster drilling while requiring lower feed forces. This means less operator fatigue and more consistent results when working on alloyed and unalloyed steel, cast materials and hard plastics. The 135° point angle reduces walking on tough surfaces and improves centring, making it especially suitable for stainless steel and other harder workpieces. Reliable double-ended design for workshop flexibility Thanks to the double-sided (double‑ended) configuration, the Karosseriebohrer functions like two drills in one: if one tip becomes blunt, the drill can be reversed and used again, extending tool life and reducing downtime. The short, sturdy design commonly used in bodywork and sheet-metal work offers stable handling in hand drills and bench machines, while the bright finish aids chip flow and visual inspection of the cutting geometry. Application focus — engineered for metal and thin-sheet work This Body Drill is optimised for drilling in metal: legged and unlegged steels, cast steel, cast iron, sintered iron, malleable castings, non-ferrous metals and hard plastics. For best results in industrial or workshop use, pair the drill with appropriate coolant and secure clamping. When used in a hand drilling machine, the ground shank and precision flute geometry promote steadier running and cleaner hole quality even at higher spindle speeds. Practical advantages for professional users The fully ground shaft and precise CNC-style grind deliver high runout accuracy and sharply defined cutting edges, translating into clean, burr‑reduced holes and less rework. Shorter penetration time and reduced thrust mean more efficient production cycles. Users who value repeatable hole quality in bodywork, repair or manufacturing environments will benefit from the drill’s combination of durability and cutting performance. For precision metalworking choose the MetavCUT Karosseriebohrer Body Drill with HSS‑G grind — METAV Werkzeuge offers expert consultation to ensure this Twist Drill matches your application needs; contact us by eMail at info@metav-werkzeuge.com or by phone +49 2822 7131930 and WhatsApp +49 170 2837271 Designation: Karosseriebohrer / Body Drill Brand: MetavCUT Type: Double-sided (double‑ended) Diameter: 3.3 mm Point Angle: 135° Colour: Bright finished Execution: Double-sided Shaft Execution: Fully ground Material: HSS‑G Spiral Length: 10 mm Total Length: 46 mm For Drilling Machine: Drilling Machine (Hand drill) Application: Drills for metal Model Series: Standard Line Packaging Unit: 10 Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ Is the Karosseriebohrer Body Drill suitable for handheld drilling machines? The MetavCUT Karosseriebohrer Body Drill is designed to be used with drilling machines including hand drills; its short, stable double‑ended form and fully ground shank support accurate running in portable equipment, though for maximum tool life and safety a secure clamp and appropriate speed/coolant are recommended. What are Twist Drills used for? Twist Drills, like the Karosseriebohrer Body Drill, are mainly used for machining high‑strength materials and larger diameters; they are easy to regrind and withstand significant stresses. The ground HSS geometry typically enables faster cutting and lower feed forces compared with rolled drills. Which 3 drill types exist? The three primary drill types are: metal drills, wood drills and stone/concrete drills. MetavCUT produces drills optimised for metalworking, such as this Body Drill tailored to sheet and body applications.

Spiralbohrer (Typ N) – 3,3 mm, 135°, extra kurz, blank, HSS-G, DIN 1897, Zylinder Der Spiralbohrer ist ein extra kurzer HSS-G-Bohrer für Metallbohrungen in Handbohrmaschinen und bietet hohe Stabilität bei beengten Platzverhältnissen. Extra kurze Bauart für erhöhte Stabilität 135° Spitze für zähe Werkstoffe HSS-G für bessere Warmfestigkeit Zylinderschaft für normales Bohrfutter Geeignet für Stahl, Guss und Nichteisen Mehr Stabilität auf engem Raum Die extra kurz Ausführung reduziert die Hebelwirkung und erhöht dadurch die Stabilität beim Bohren in beengten Bereichen. Durch die verkürzte Gesamtlänge und kürzere Spirallänge verringert sich die Bruchneigung, was insbesondere bei dünnwandigen Teilen und Profilen von Vorteil ist. Die Bauform nach DIN 1897 macht dieses Werkzeug robust und praxistauglich für Werkstatt und Montage, ohne dass spezielle Aufnahmen erforderlich sind. Effizientes Bohren in hartem Material Der Bohrer mit 135° Spitzenwinkel dringt leichter in härtere Werkstoffe ein und reduziert das Auslaufen beim Anbohren. Die HSS-G-Legierung erlaubt höhere Schnittgeschwindigkeiten und sorgt laut Herstellerangaben für bis zu 40 % schnelleres Bohren bei gleichzeitig bis zu 50 % geringerer Anpresskraft, was die Arbeit mit Handmaschinen deutlich erleichtert. Dadurch ergeben sich spürbare Zeit- und Kraftvorteile bei Legierungsstählen, Gusseisen und Temperguss. Universell einsetzbar und leicht handhabbar Mit dem Zylinderschaft passt das Werkzeug in gängige Dreibackenfutter und eignet sich damit für Handbohrmaschinen und Winkelbohrer im Standardbereich. Als Typ N Normalspirale ist der Bohrer optimal für Metall, Eisen und Stahl konzipiert; bei sehr weichen Werkstoffen kann ein Spezialbohrer vorteilhafter sein. Die Abmessungen von 3,3 mm Durchmesser, 16 mm Spirallänge und 46 mm Gesamtlänge machen den Bohrer zur passenden Wahl für allgemeine Montagearbeiten, Reparaturen und präzise Werkstattaufgaben. Empfehlung: MetavCUT Spiralbohrer (Typ N) für stabile, effiziente Metallbohrungen wählen; bei Fragen oder Bedarf an technischer Beratung steht METAV Werkzeuge gern zur Verfügung – eMail: info@metav-werkzeuge.com, Telefon: +49 2822 7131930 Technische Daten Bezeichnung: Spiralbohrer Marke: MetavCUT SKU: 56033-FDA Durchmesser: 3,3 mm Spitzenwinkel: 135° Typ: Typ N Material: HSS-G Norm: DIN 1897 Ausführung: extra kurz Farbe: blank (bright finished) Schaftausführung: Zylinder Gesamtlänge: 46 mm Spirallänge: 16 mm Für Bohrmaschine: Handbohrmaschine Modellserie: Standard Line Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ Für welche Materialien eignet sich der Spiralbohrer von MetavCUT (Typ N)? Der Spiralbohrer von MetavCUT (Typ N) eignet sich besonders für legierte und unlegierte Stähle, Gussstahl, Gusseisen, Sintereisen, Temperguss sowie Nichteisenmetalle und Hartkunststoff; bei sehr weichen Werkstoffen kann eine andere Bohrersorte besser geeignet sein. Kann der Spiralbohrer von MetavCUT ohne Zentrierbohrer in Handbohrmaschinen verwendet werden? Ja, der Spiralbohrer von MetavCUT ist für den Standard-Einsatz in Handbohrmaschinen vorgesehen und kann direkt gebohrt werden; bei maximaler Präzision empfiehlt sich vor dem Endbohren ein kurzes Anpunkten. Wie erhöht die extra kurz Ausführung die Standzeit und Sicherheit bei der Arbeit? Die extra kurz Ausführung des MetavCUT Spiralbohrers reduziert die Hebelwirkung und Vibration, was Bruchneigung verringert und die Standzeit des Werkzeugs bei anspruchsvollen Metallbohrungen erhöht. Welches Bohrfutter ist für den Zylinderschaft des Spiralbohrers von MetavCUT ideal? Ein gängiges Dreibackenfutter ist ideal für den Zylinderschaft des MetavCUT Spiralbohrers; bei sehr hohen Drehmomenten sollte auf feste Spannung geachtet werden, um Durchrutschen zu vermeiden. Bietet METAV Werkzeuge technische Beratung zur Auswahl des richtigen Bohrers an? Ja, METAV Werkzeuge bietet umfassende Beratung für die Auswahl und Anwendung von Bohrern; bei Unsicherheit können technische Daten angefragt oder die Beratung per eMail an info@metav-werkzeuge.com bzw. telefonisch unter +49 2822 7131930 in Anspruch genommen werden. {"@context":"https://schema.org","@graph":[{"@type":"Product","@id":"#56033-FDA","sku":"56033-FDA","mpn":"56033-FDA","name":"Spiralbohrer 56033-FDA","description":"Spiralbohrer Typ N, 3,3 mm Durchmesser, 135° Spitzenwinkel, extra kurz, blank, HSS-G, DIN 1897, Zylinderschaft; extra kurze Bauart für mehr Stabilität bei beengten Platzverhältnissen; geeignet für Handbohrmaschinen und Metallanwendungen wie Stahl, Guss und Nichteisen.","image":["https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741b/logo-metav-1200-1200.png","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741e/logo-metav-1200-900.png"],"additionalProperty":[{"@type":"PropertyValue","name":"Bezeichnung","value":"Spiralbohrer"},{"@type":"PropertyValue","name":"Durchmesser","value":"3,3 mm"},{"@type":"PropertyValue","name":"Spitzenwinkel","value":"135°"},{"@type":"PropertyValue","name":"Typ","value":"Typ N"},{"@type":"PropertyValue","name":"Farbe","value":"blank (bright finished)"},{"@type":"PropertyValue","name":"Ausführung","value":"extra kurz"},{"@type":"PropertyValue","name":"Norm","value":"DIN 1897"},{"@type":"PropertyValue","name":"Material","value":"HSS-G"},{"@type":"PropertyValue","name":"Schaftausführung","value":"Zylinder"},{"@type":"PropertyValue","name":"Spirallänge","value":"16 mm"},{"@type":"PropertyValue","name":"Gesamtlänge","value":"46 mm"},{"@type":"PropertyValue","name":"Für Bohrmaschine","value":"Handbohrmaschine"},{"@type":"PropertyValue","name":"Modellserie","value":"Standard Line"},{"@type":"PropertyValue","name":"Hersteller","value":"MetavCUT"}],"skuProperty":[{"@type":"PropertyValue","name":"uid","value":"56033-FDA"}]},{"@type":"FAQPage","mainEntity":[{"@type":"Question","name":"Für welche Materialien eignet sich der Spiralbohrer von MetavCUT (Typ N)?","acceptedAnswer":{"@type":"Answer","text":"Der Spiralbohrer von MetavCUT (Typ N) eignet sich besonders für legierte und unlegierte Stähle, Gussstahl, Gusseisen, Sintereisen, Temperguss sowie Nichteisenmetalle und Hartkunststoff; bei sehr weichen Werkstoffen kann ein anderer Bohrer besser geeignet sein."}},{"@type":"Question","name":"Kann der Spiralbohrer von MetavCUT ohne Zentrierbohrer in Handbohrmaschinen verwendet werden?","acceptedAnswer":{"@type":"Answer","text":"Ja, der Spiralbohrer von MetavCUT ist für den Standard-Einsatz in Handbohrmaschinen vorgesehen und kann direkt verwendet werden; bei maximaler Präzision empfiehlt sich vor dem Endbohren ein kurzes Anpunkten."}},{"@type":"Question","name":"Wie erhöht die extra kurz Ausführung die Standzeit und Sicherheit bei der Arbeit?","acceptedAnswer":{"@type":"Answer","text":"Die extra kurz Ausführung des MetavCUT Spiralbohrers reduziert die Hebelwirkung und Vibration, wodurch die Bruchneigung verringert und die Standzeit des Werkzeugs bei anspruchsvollen Metallbohrungen erhöht wird."}},{"@type":"Question","name":"Welches Bohrfutter ist für den Zylinderschaft des Spiralbohrers von MetavCUT ideal?","acceptedAnswer":{"@type":"Answer","text":"Ein gängiges Dreibackenfutter ist ideal für den Zylinderschaft des MetavCUT Spiralbohrers; bei sehr hohen Drehmomenten sollte auf feste Spannung geachtet werden, um Durchrutschen zu vermeiden."}},{"@type":"Question","name":"Bietet METAV Werkzeuge technische Beratung zur Auswahl des richtigen Bohrers an?","acceptedAnswer":{"@type":"Answer","text":"Ja, METAV Werkzeuge bietet umfassende Beratung für die Auswahl und Anwendung von Bohrern; technische Daten und Beratung sind per E-Mail an info@metav-werkzeuge.com oder telefonisch unter +49 2822 7131930 erhältlich."}}]},{"@type":"ItemPage","url":"https://metav-shop.de/spiralbohrer-56033-FDA","dateModified":"2026-05-04T12:00:00+01:00","author":{"@type":"Person","name":"Stephan Bayer","url":"https://www.linkedin.com/in/stephan-bayer/"},"publisher":{"@type":"Organization","name":"Metav Werkzeuge GmbH","url":"https://metav-shop.de","logo":{"@type":"ImageObject","url":"https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png","width":1200,"height":675},"address":{"@type":"PostalAddress","streetAddress":"Parkring 45","postalCode":"46446","addressLocality":"Emmerich","addressCountry":"DE"},"telephone":"+49 2822 7131930","email":"info@metav-werkzeuge.com"},"about":[{"@type":"Thing","name":"Spiralbohrer Typ N"},{"@type":"Thing","name":"Extra kurz Bauart"},{"@type":"Thing","name":"HSS-G für Metallbohrungen"}],"mentions":[{"@type":"Thing","name":"Zylinderschaft Dreibackenfutter kompatibel"},{"@type":"Thing","name":"DIN 1897 Norm"},{"@type":"Thing","name":"Anwendung: Handbohrmaschine und Winkelbohrer"}]}]}

Spiralbohrer HSS‑G 3,3 mm, geschliffen, 118°, Sechskant, DIN 338, Silber — MetavCUT Standard Line Der Spiralbohrer HSS‑G 3,3 mm geschliffen ist ein präziser Metallbohrer für Handbohrmaschine und Werkstattanwendungen. Geschliffener HSS‑G Bohrer für präzise Metallbohrungen Sechskantschaft für sicheren Kraftschluss im Akkuhalter Spitzenwinkel 118° für gute Zentrierung in weichen Metallen Spiral‑ und Gesamtlänge: 35 mm / 85 mm für Standardanwendungen Norm DIN 338: Kurzer Spiralbohrer mit Zylinderschaft Hohe Schneidleistung durch geschliffene HSS‑Geometrie Der Einsatz von HSS‑G in geschliffener Ausführung sorgt für scharfe Schneidkanten und eine hohe Rundlaufgenauigkeit. Das geschliffene Profil ermöglicht ein schnelleres Bohren bei gleichzeitig geringerem Anpressdruck, wodurch der Arbeitsaufwand in der Werkstatt reduziert wird. Für die Bearbeitung von legierten und unlegierten Stählen sowie Nichteisenmetallen bietet diese Ausführung eine ausgewogene Kombination aus Standzeit und Schnittqualität. Optimiert für Handbohrmaschine und typische Metallaufgaben Bei einem Durchmesser von 3,3 mm fällt der Bohrer in den Standard‑Bereich und ist ideal für Werkstatt, Montage und DIY‑Projekte geeignet. Die Kombination aus Spiral‑ und Gesamtlänge macht den Bohrer geeignet für dünne bis mittlere Bleche und Profile. Für saubere Ergebnisse empfiehlt sich vorheriges Anpunkten bei höherer Präzision; so wird ein Abwandern des Bohrers reduziert und die Bohrung exakt geführt. Technische Erläuterung zum Schleifverfahren und praktische Hinweise Beim Begriff „geschliffen“ handelt es sich um einen CNC‑Schliff, bei dem die Spannuten und Geometrie in den Rohling eingeschnitten werden. Das Ergebnis sind saubere Bohrlöcher und eine präzise Schneidkante. Gleichzeitig kann ein geschliffener Bohrer empfindlicher gegenüber Stoßbelastungen sein; daher ist Kühlung und ein stationärer Einsatz oder eine ruhige Spannaufnahme bei anspruchsvollen Materialien empfehlenswert. Passform, Schaft und Einsatzempfehlung für Anwender Der Sechskantschaft erlaubt formschlüssigen Kraftschluss in Bit‑Haltern und Schnellwechselaufnahmen, was den Werkzeugwechsel beschleunigt und Durchdrehen verhindert. Die Ausführung nach DIN 338 kennzeichnet die kurze Spiralform mit Zylinderschaft und richtet sich an Anwender, die in der Metallbearbeitung zuverlässige, standardisierte Werkzeuge benötigen. Geeignet für Handwerker, Wartungsteams und Hobbyanwender mit dem Fokus auf präzise Metallbohrungen. Empfehlung: Den geschliffenen MetavCUT HSS‑G Spiralbohrer 3,3 mm für präzise Metallbearbeitung verwenden; bei technischen Fragen oder zur Beratung steht METAV Werkzeuge gerne per E‑Mail unter info@metav-werkzeuge.com oder telefonisch unter +49 2822 7131930 zur Verfügung Bezeichnung: Spiralbohrer Marke: MetavCUT SKU: 57033-FDA Durchmesser: 3,3 mm Material: HSS‑G Ausführung: geschliffen Spitzenwinkel: 118° Farbe: silber Schaftausführung: Sechskant Spirallänge: 35 mm Gesamtlänge: 85 mm Norm: DIN 338 Für Bohrmaschine: Handbohrmaschine Modellserie: Standard Line Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ Welche Materialien lassen sich mit dem Spiralbohrer von MetavCUT gut bearbeiten? Der MetavCUT Spiralbohrer HSS‑G 3,3 mm eignet sich besonders für legierten und unlegierten Stahl, Gusswerkstoffe, Nichteisenmetalle und harte Kunststoffe, wobei die geschliffene Geometrie saubere Bohrbilder liefert. Kann der Spiralbohrer HSS‑G 3,3 mm in Akkuschraubern verwendet werden? Ja, der Sechskantschaft des MetavCUT Spiralbohrers erlaubt die Nutzung in Bit‑Haltern und vielen Akkuschraubern, wodurch ein schneller Werkzeugwechsel möglich ist. Brauche ich bei der Arbeit mit dem Spiralbohrer spezielle Kühlung? Bei anspruchsvolleren oder zähen Werkstoffen empfiehlt sich Kühlung; der geschliffene MetavCUT HSS‑G Bohrer erreicht die beste Standzeit bei kontrollierter Kühlung und ruhiger Spannaufnahme. Wie vermeide ich das Wandern des Bohrers bei kleinen Durchmessern? Mit einem Zentrierbohrer anpunktieren oder eine Anlaufrille setzen hilft, den MetavCUT Spiralbohrer 3,3 mm präzise zu führen und das Wandern auf der Oberfläche zu minimieren. {"@context":"https://schema.org","@graph":[{"@type":"Product","@id":"#57033-FDA","sku":"57033-FDA","mpn":"57033-FDA","name":"Spiralbohrer 57033-FDA","description":"Spiralbohrer HSS‑G 3,3 mm, geschliffen, 118°, Sechskant, DIN 338, Silber. Präziser Metallbohrer für Handbohrmaschine und Werkstattanwendungen; geschliffene Geometrie für scharfe Schneidkanten und hohe Rundlaufgenauigkeit; geeignet für legierte und unlegierte Stähle sowie Nichteisenmetalle.","image":["https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741b/logo-metav-1200-1200.png","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741e/logo-metav-1200-900.png","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png"],"additionalProperty":[{"@type":"PropertyValue","name":"Bezeichnung","value":"Spiralbohrer"},{"@type":"PropertyValue","name":"Marke","value":"MetavCUT"},{"@type":"PropertyValue","name":"SKU","value":"57033-FDA"},{"@type":"PropertyValue","name":"Durchmesser","value":"3,3 mm"},{"@type":"PropertyValue","name":"Material","value":"HSS‑G"},{"@type":"PropertyValue","name":"Ausführung","value":"geschliffen"},{"@type":"PropertyValue","name":"Spitzenwinkel","value":"118°"},{"@type":"PropertyValue","name":"Farbe","value":"silber"},{"@type":"PropertyValue","name":"Schaftausführung","value":"Sechskant"},{"@type":"PropertyValue","name":"Spirallänge","value":"35 mm"},{"@type":"PropertyValue","name":"Gesamtlänge","value":"85 mm"},{"@type":"PropertyValue","name":"Norm","value":"DIN 338"},{"@type":"PropertyValue","name":"Für Bohrmaschine","value":"Handbohrmaschine"},{"@type":"PropertyValue","name":"Modellserie","value":"Standard Line"},{"@type":"PropertyValue","name":"Hersteller","value":"Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com"}]},{"@type":"FAQPage","mainEntity":[{"@type":"Question","name":"Welche Materialien lassen sich mit dem Spiralbohrer MetavCUT HSS‑G 3,3 mm bearbeiten?","acceptedAnswer":{"@type":"Answer","text":"Der MetavCUT Spiralbohrer HSS‑G 3,3 mm eignet sich besonders für legierten und unlegierten Stahl, Gusswerkstoffe, Nichteisenmetalle und harte Kunststoffe und liefert dank geschliffener Geometrie saubere Bohrbilder."}},{"@type":"Question","name":"Kann der Spiralbohrer MetavCUT HSS‑G 3,3 mm in Akkuschraubern verwendet werden?","acceptedAnswer":{"@type":"Answer","text":"Ja, der Sechskantschaft des MetavCUT Spiralbohrers erlaubt die Nutzung in Bit‑Haltern und vielen Akkuschraubern für schnellen Werkzeugwechsel und formschlüssige Drehmomentübertragung."}},{"@type":"Question","name":"Brauche ich für den MetavCUT Spiralbohrer HSS‑G 3,3 mm spezielle Kühlung?","acceptedAnswer":{"@type":"Answer","text":"Bei anspruchsvolleren oder zähen Werkstoffen empfiehlt sich Kühlung; der geschliffene MetavCUT HSS‑G Bohrer erreicht die beste Standzeit bei kontrollierter Kühlung und ruhiger Spannaufnahme."}},{"@type":"Question","name":"Wie vermeide ich das Wandern des MetavCUT Spiralbohrers 3,3 mm bei kleinen Durchmessern?","acceptedAnswer":{"@type":"Answer","text":"Zum Vermeiden des Wanderns den MetavCUT Spiralbohrer 3,3 mm vorbohren oder mit einem Zentrierbohrer anpunktieren und ruhige Spannaufnahme verwenden."}}]},{"@type":"ItemPage","url":"https://metav-shop.de/produkt/57033-FDA","dateModified":"2026-05-04T12:00:00+01:00","author":{"@type":"Person","name":"Stephan Bayer","url":"https://www.linkedin.com/in/stephan-bayer/"},"publisher":{"@type":"Organization","name":"Metav Werkzeuge GmbH","url":"https://metav-shop.de","logo":{"@type":"ImageObject","url":"https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png","width":1200,"height":675},"address":{"@type":"PostalAddress","streetAddress":"Parkring 45","postalCode":"46446","addressLocality":"Emmerich","addressCountry":"DE"},"telephone":"+49 2822 7131930","email":"info@metav-werkzeuge.com"},"about":[{"@type":"Thing","name":"Spiralbohrer HSS‑G"},{"@type":"Thing","name":"Bohrer für Metall"},{"@type":"Thing","name":"DIN 338 Kurzer Spiralbohrer"}],"mentions":[{"@type":"Thing","name":"Sechskantschaft für Bit‑Halters"},{"@type":"Thing","name":"Geschliffene HSS‑Geometrie"},{"@type":"Thing","name":"Einsatz in Handbohrmaschine"}]}]}

Twist Drill — Short HSS‑G Type N for Drilling Machines, Ø 3.3 mm, 135°, DIN 338, Bright Finished The Twist Drill short Type N from MetavCUT is a precision metal‑working drill designed for drilling machines, offering a 3.3 mm diameter and a 135° tip angle for demanding steel and cast‑metal applications. Short HSS‑G Type N for high stability 3.3 mm diameter for precise pilot holes 135° tip angle for hard materials Fully ground shank for accurate centring Conforms to DIN 338 for metalworking Faster metalworking thanks to ground HSS geometry The HSS‑G construction of this Twist Drill provides a measurable performance advantage: the ground geometry enables up to 40% faster drilling while requiring approximately 50% less feed force than conventional HSS drills. For professionals working with legated and unlegated steels, cast steel and non‑ferrous metals, this means shorter cycle times and less operator effort. The result is more efficient machining without compromising hole quality. Increased stability and precision from the short design Because this tool follows DIN 338 as a short twist drill, the reduced overall length improves stiffness and reduces bending under load. Shorter overhang leads to better concentricity and less chatter, which is especially beneficial when producing tight tolerance holes in hard materials. The compact design therefore supports consistent, repeatable results and reduces scrap rates in workshop environments. Reliable centring and tip design for hard materials The 135° tip angle is optimised for harder workpieces such as stainless steel, reducing walking and improving initial contact. The drill’s Type N normal spiral is the classic metal spiral geometry, suited primarily for metalworking rather than soft timber. A fully ground shank ensures excellent clamping fit and centring in the chuck, while the bright finished surface promotes smooth chip evacuation and visual inspection of wear. Built for professional drilling machines and demanding tasks Compatible with standard drilling machines, this short HSS‑G metal drill is intended for users who require dependable performance when machining steel, castings and technical plastics. Workshops, maintenance crews and metal fabricators benefit from the balance of hardness and toughness offered by the HSS‑G material, making it a practical choice for production and repair tasks where precision and tool life matter. Strong recommendation: choose the MetavCUT HSS‑G short Type N Twist Drill for demanding metalwork—METAV Werkzeuge provides expert, personalised advice if you are unsure whether this tool meets your requirements; contact us by eMail at info@metav-werkzeuge.com, by phone at +49 2822 7131930 or via WhatsApp at +49 170 2837271 Designation: Twist Drill (Spiralbohrer) Brand: MetavCUT SKU: 27033-FDA Type: Type N Material: HSS‑G Diameter: 3.3 mm Tip angle: 135° Overall length: 65 mm Spiral length: 36 mm Execution: short Shaft execution: fully ground Colour / Finish: bright finished Application: Drills for metal For drilling machine: Drilling Machine Model series: Basic Line Norm: DIN 338 Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the Twist Drill used for and which materials is it suitable for? The MetavCUT Twist Drill short Type N is mainly used for machining high‑strength materials and larger diameters; it performs particularly well in legated and unlegated steel, cast steel, cast iron, sintered iron, tempered castings, non‑ferrous metals and hard plastics. Its ground design is easier to sharpen and withstands higher loads. Which three main drill types exist and where does this product fit? There are three principal drill types: Metal Drill, Wood Drill and Stone / Concrete Drill. The MetavCUT Twist Drill is a metal drill (Type N), optimised for metal applications rather than timber or masonry.

Twist Drill — Short Type N Metal Drill, 3.3 mm, 135°, HSS‑G, Bright Finished The Twist Drill is a short Type N metal drill designed for precise drilling in hard materials with a 3.3 mm diameter and a 135° tip angle for industrial Drilling Machine applications. Short design for higher stability Sharp CNC‑ground geometry for clean holes 135° tip angle for hard materials Fully ground shank for excellent concentricity Stability and faster machining for demanding metalwork A short design reduces the unsupported length and significantly increases Stability during drilling, which results in less bending and more precise holes in steels and other hard materials. The HSS‑G ground geometry enables up to 40% faster penetration while requiring about 50% less feed force than conventional HSS variants, so machining cycles are shorter and operator effort is reduced. This makes the tool particularly suitable where repeatable, tight‑tolerance holes are required. Built for hard materials with an optimised tip geometry The combination of a 135° tip angle and the classic Type N spiral is optimised for tougher workpieces such as stainless steels and cast materials. A larger tip angle shortens the time to break through the surface and improves centring on hard substrates. The term HSS‑G indicates a ground flute geometry produced by CNC grinding, which creates very sharp cutting edges and high roundness accuracy—advantages that pay off when working with alloyed and unalloyed steels. Dimensions and machine compatibility for practical workshop use With a 3.3 mm diameter, a Spiral Length of 36 mm and an Overall Length of 65 mm, this short twist drill fits standard chucks on conventional Drilling Machines and is the right choice where lateral rigidity is essential. The Fully Ground Shank ensures excellent concentricity in the chuck, reducing run‑out and vibration. The bright finished surface aids chip evacuation and visual inspection of the cutting geometry. Who benefits and where to deploy this professional tool Metalworkers, maintenance teams and precision toolrooms appreciate the Profi Line quality of this MetavCUT product when producing repeatable holes in metal components. The short, ground design is ideal for stationary or portable Drilling Machine operations where stability, hole quality and efficient cycle times matter. For tasks demanding high edge quality and consistent diameter, this twist drill provides the right balance of toughness and sharpness. Choose the MetavCUT Profi Line Twist Drill for reliable, high‑precision metal drilling and contact METAV Werkzeuge for personalised technical advice at info@metav-werkzeuge.com or phone +49 2822 7131930 Designation: Twist Drill Brand: MetavCUT SKU: 48033-FDA Diameter: 3.3 mm Spiral Length: 36 mm Overall Length: 65 mm Tip Angle: 135° Type: Type N Execution: Short Material: HSS‑G Shank Execution: Fully Ground Surface Finish: Bright Finished Application: Drills for Metal Model Series: Profi Line For Drilling Machine: Drilling Machine Norm: DIN 338 Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ For what is the Twist Drill used? The MetavCUT Twist Drill (Type N) is primarily applied to machining high‑strength materials and larger drilling diameters in metalworking. This short, ground form is easy to re‑grind and withstands higher loads, which makes it suitable for steels, cast irons and non‑ferrous metals while delivering clean, precise holes. Which 3 drill types exist? In general drill categorisation there are three main types: metal drills, wood drills and stone/concrete drills. The MetavCUT Twist Drill (Type N) belongs to the metal drill category and is optimised for machining metals rather than timber or masonry.

Twist Drill — Type N short, Diameter 3.3 mm, 135° tip, TiN-coated, HSS-G, short, DIN 338 The Twist Drill short Type N TiN-coated is a precision drill for use in a Drilling Machine, designed for accurate metalworking in demanding shop and industrial environments. Short design for higher drilling stability 135° tip angle for hard metal entry TiN-coated for extended tool life Fully ground HSS-G for precise, clean holes Conforms to DIN 338 for short solid shank drills Outstanding accuracy and faster metalworking thanks to reduced overhang A short Twist Drill with a reduced overhang minimises bending and vibration, delivering higher stability and significantly improved concentricity when drilling metals. The shorter projection from the chuck helps to achieve clean, round holes even at higher spindle speeds. For tasks where precision matters — such as component fitting or pilot-hole preparation — this compact geometry reduces the risk of chatter and tool breakage while enabling more consistent hole diameters. Coating and material that extend lifetime under load The combination of HSS-G substrate and TiN coating offers a clear performance advantage when machining steels and non-ferrous alloys. HSS-G (ground high-speed steel) provides sharp cutting edges and excellent edge retention, while the TiN (Titanium Nitride) surface reduces friction and wear, improving heat resistance. In practice, this means longer intervals between regrinds and more holes per tool in both alloyed and unalloyed steel, cast materials and hard plastics when used with appropriate cooling. Designed application and who benefits most from this tool Manufacturers, toolrooms and maintenance workshops that require reproducible, accurate holes will value the short Type N geometry and fully ground Shank for dependable performance. This Twist Drill is particularly suitable for drilling into legierten und unlegierten Stahl, Gusseisen, Kupfer, Bronze und Hartkunststoff when paired with adequate coolant. Users seeking a balance of service life and re-sharpenability will appreciate the ability to resharpen ground flutes while maintaining excellent runout characteristics on stationary and portable machines. Practical advantages explained: tip angle, grind and standards A 135° tip angle is optimised for harder materials and reduces the initial cutting forces needed to penetrate tough surfaces, improving centering and lowering the chance of walk-off. The designation fully ground (HSS-G) indicates that the flutes and geometry were produced by CNC grinding rather than rolling, resulting in sharper edges and superior hole finish — albeit with a slightly increased brittleness that recommends stationary setups and coolant use. Compliance with DIN 338 assures standardised lengths and tolerances for short solid shank drills, simplifying tool selection and stocking. Strong recommendation: MetavCUT precision short Twist Drill for metalworking tasks where stability and lifetime matter — if uncertain whether this tool matches specific requirements, METAV Werkzeuge offers expert advice and application support; contact via email at info@metav-werkzeuge.com, by phone +49 2822 7131930, or WhatsApp +49 170 2837271 for personalised guidance and technical consultation. Technical data Designation: Twist Drill (Short) Brand: MetavCUT SKU: 46033-FDA Diameter: 3.3 mm Overall length: 65 mm Spiral length: 36 mm Tip angle: 135° Type: Type N Material: HSS-G Shank execution: Fully ground Coating/Colour: TiN-coated For drilling machine: Drilling Machine Model series: Standard Line Norm: DIN 338 Application: Drills for metal Ausführung: short Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the MetavCUT Twist Drill (Type N) primarily used for? The MetavCUT Twist Drill Type N is primarily used for drilling metal; it excels in machining alloyed and unalloyed steel, cast irons and non-ferrous metals when employed in a Drilling Machine with suitable cooling to reduce wear. What is a Twist Drill used for? A Twist Drill is mainly applied to the machining of high-strength materials and larger drill diameters. This shape is easy to regrind and withstands higher loads. When used with appropriate coolant the TiN-coated HSS-G variant significantly reduces friction and wear, extending tool life. Which three drill types exist? The three primary drill types are Metal drills, Wood drills and Masonry/Concrete drills. The MetavCUT Twist Drill belongs to the Metal drill category and is optimised for metalworking applications.

Introducing the Twist Drill — Short Type N, 3.3 mm, TIN-coated, HSS-G, 135° (MetavCUT) The Twist Drill short Type N is a precision metalworking drill designed for use with a Hand Drill or Drilling Machine and ideal for accurate holes in alloyed and unalloyed steel. Short design for higher stability and precision TIN-coated surface for reduced wear and friction Fully ground HSS-G shank for faster cutting 135° point angle for hard materials such as stainless steel Conforms to DIN 338 for short twist drills Higher precision through reduced overhang and robust geometry A shorter overall length delivers tangible benefits during machining: the short Twist Drill minimises cantilever action and therefore reduces vibration and tool deflection. This results in more concentric holes and improved surface finish when drilling metal. For users who require consistent hole quality in demanding jobs, the reduced length directly translates into fewer reject parts and less rework. Longer tool life and reduced friction thanks to TIN coating The TIN-coated surface (Titanium Nitride) lowers friction and increases thermal resistance during cutting, which slows wear on the cutting edges. Combined with the HSS-G substrate, this coating is particularly effective when drilling alloyed and unalloyed steel, cast iron and copper alloys. The result is extended tool life under appropriate cooling and the ability to maintain cutting performance for longer production runs. Faster penetration with a fully ground geometry Because the flute geometry is produced by precision grinding, the fully ground HSS-G Twist Drill offers sharper cutting edges and higher runout accuracy than rolled variants. This enables up to 40% faster drilling rates and requires significantly less thrust force, improving machine and operator efficiency when working with tougher materials. For workshop and industrial environments, this means higher throughput with less operator fatigue. Application range and recommended use Designed as a Type N (normal spiral) drill, this short Twist Drill is optimised for metalworking operations on materials such as steel, cast iron, sintered iron, copper, bronze and hard plastics. The 135° point angle reduces initial entry forces and improves centring for hard workpieces like stainless steel. Use with adequate cooling and secure clamping is recommended to prevent premature tool wear or breakage. Strong recommendation: Select the MetavCUT Twist Drill in HSS-G with TIN coating for reliable, precision metal drilling — for tailored technical advice contact METAV Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930, WhatsApp +49 170 2837271 Designation: Twist Drill (Short) Brand: MetavCUT SKU: 41033-FDA Diameter: 3.3 mm Point angle: 135° Type: Type N Colour/Coating: TIN-coated Execution: Short Shank finish: Fully ground Material: HSS-G Spiral length: 36 mm Overall length: 65 mm For drilling machine: Drilling Machine / Hand Drill Standard: DIN 338 Packaging unit: 10 pieces Applications: Drills for metal Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What are Twist Drills used for and which materials suit this MetavCUT Twist Drill? Twist Drills like the MetavCUT Twist Drill are primarily used for machining holes in metal; this short Type N HSS-G drill with TIN coating is suitable for alloyed and unalloyed steel, Tempered Cast Iron, Gusseisen, Neusilber, Copper, Bronze and Hard Plastics, offering good lifetime under appropriate cooling. Which three drill types are commonly distinguished? Common drill categories include Metal drill bits, Wood drill bits and Masonry/Concrete drill bits; the MetavCUT Twist Drill belongs to the metal drill class and is optimised for that application.

Twist Drill — Long HSS‑G 3.3 mm, 135° tip, Bright Finished (DIN 340) by MetavCUT The Twist Drill is a long‑version HSS‑G drill designed for precise, deep hole drilling in metal and for use with Drilling Machines and hand drills. Long design for deep or recessed holes HSS‑G ground for sharp, precise cutting 135° tip angle for harder materials DIN 340 long‑version geometry Suitable for Drilling Machines and hand drills Durable HSS‑G material for demanding metal work The long‑version HSS‑G construction provides a robust combination of hardness and cutting performance for machining steels and other metal materials. With the DIN 340 specification the drill is intended for deeper holes where stability and axial runout resistance matter. The ground flute geometry yields cleaner holes and improved concentricity, which reduces rework and ensures consistent fits for dowels, bushings or threaded inserts. Long format for deep or hard‑to‑reach bores A longer overall length with a spiral length of 69 mm and Total Length 106 mm enables access to bores that standard drills cannot reach without extensions. This extended design makes the tool especially suitable when the drilling point is recessed or the workpiece geometry limits straight‑in access. The reduced need for extensions or auxiliary tooling speeds up setup and keeps the machining process more efficient. Optimised geometry and tip for harder materials With a 135° tip angle the tool penetrates tougher materials with less tendency to wander and provides a flatter tip shape that suits stainless and alloyed steels. The fully ground shank and flute geometry support higher precision and surface quality in the hole. As a result, feed forces can be lower and tool life improved under appropriate cooling and machining parameters. Target users and typical applications Engineers, workshop technicians and maintenance professionals benefit from the long HSS‑G design when drilling in legated and unlegated steel, cast materials and hard plastics where clean holes and accurate positioning are required. The MetavCUT long Twist Drill suits fabrication shops, toolrooms and repair operations needing reliable drills for medium‑to‑deep metal bores. Choose the MetavCUT long HSS‑G Twist Drill for dependable deep‑hole performance and contact METAV Werkzeuge for tailored technical advice — eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 | WhatsApp: +49 170 2837271 Technical Specifications Designation: Twist Drill Brand: MetavCUT SKU: 53033-FDA Diameter: 3.3 mm Tip angle: 135° Execution: long Colour: Bright finished Material: HSS‑G Standard: DIN 340 Total length: 106 mm Spiral length: 69 mm Shank finish: fully ground Model series: Standard Line Application: Drills for metal Suitable for: Drilling Machine / Hand Drill Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the MetavCUT Twist Drill used for? The MetavCUT Twist Drill (Twist Drill) is primarily applied to machining high‑strength materials and larger drill diameters; its design allows straightforward resharpening and it endures higher loads, making it suitable where robust, repeatable metal drilling is required. Which three drill types exist? Drill types commonly distinguished are Metal drills, Wood drills and Stone/Concrete drills; the MetavCUT Twist Drill belongs to the Metal drill category and is optimised for metalworking tasks.

Spiralbohrer Ø 3,4 mm, 118° Spitzenwinkel, Typ N — kurzer HSS-Bohrer, schwarz, DIN 338 Der Spiralbohrer ist ein kurzer HSS-Spiralbohrer Typ N mit Ø 3,4 mm für Metallbohrungen, geeignet für Handbohrmaschine und stationäre Maschinen. Kurze Ausführung nach DIN 338 für höhere Stabilität HSS rollgewalzt reduziert Bruchrisiko bei kleinen Durchmessern Typ N Normalspirale speziell für Metallbearbeitung 118° Spitzenwinkel für sicheres Anbohren und Zentrieren Höhere Stabilität und geringeres Bruchrisiko bei Metallbohrungen Der kurze HSS-Bohrer bietet durch die verkürzte Auskraglänge eine deutlich bessere Stabilität und reduziert das Risiko von Verbiegen oder Ausschlagen. Die rollgewalzte Fertigung macht den Bohrer elastischer und verringert insbesondere bei Durchmessern unter 6 mm das Bruchrisiko, sodass saubere und wiederholbare Bohrungen in legierten und unlegierten Stahl sowie in Gusseisen, Nichteisenmetallen und Kunststoffen erzielt werden können. Die kompakte Bauart erleichtert die Handhabung an mobilen Handbohrmaschinen und an stationären Säulenbohrmaschinen gleichermaßen. Vielseitigkeit im Standardbereich für Werkstatt und Montage Mit Ø 3,4 mm fällt der Bohrer in den Standard-Bereich für den Alltagsgebrauch und eignet sich besonders für schnelle Bohrungen in dünnen bis mittleren Blechen, Profilen und Flachstählen. Die Normalspirale (Typ N) sorgt für zuverlässige Spanabfuhr bei typischen Metallanwendungen. Für besonders präzise Passungen empfiehlt sich vorheriges Anpunkten mit einem Zentrierbohrer; bei tieferen Löchern über das Fünffache des Durchmessers wird mehrstufiges Aufbohren empfohlen, um die Spanabfuhr sicherzustellen und die Langlebigkeit des Werkzeugs zu erhöhen. Normkonforme Ausführung und praxisnahe Einsatzempfehlung Die Produktion nach DIN 338 garantiert eine einheitliche Qualität und Kompatibilität mit gängigen Zylinderschaft-Aufnahmen. Der 118° Spitzenwinkel erleichtert das Anbohren und ist ein guter Kompromiss für allgemeine Metallarbeiten; für sehr harte Werkstoffe kann ein größerer Winkel sinnvoll sein. Anwender in Profi-Werkstätten und ambitionierten Heimwerkstätten profitieren von der robusten Verarbeitung und der Möglichkeit, den Bohrer sowohl in Handgeräten als auch in stationären Maschinen einzusetzen. Bei Unsicherheit hinsichtlich Einsatz und Werkstoff berät METAV Werkzeuge kompetent und praxisorientiert. Empfehlung: Für präzise Metallbohrungen empfehlen wir den MetavCUT kurzen HSS-Bohrer Typ N mit Ø 3,4 mm; bei technischen Fragen steht METAV Werkzeuge per E‑Mail unter info@metav-werkzeuge.com oder telefonisch unter +49 2822 7131930 gern zur Verfügung Bezeichnung: Spiralbohrer Marke/Hersteller: MetavCUT SKU: 40034-FDA Durchmesser: 3,4 mm Spiralänge: 39 mm Gesamtlänge: 70 mm Spitzenwinkel: 118° Typ: Typ N Ausführung: kurz Material: HSS Farbe: schwarz Norm: DIN 338 Für Bohrmaschine: Handbohrmaschine Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ Wie eignet sich der Spiralbohrer von MetavCUT für Metallarbeiten und welche Materialien sind möglich? Der MetavCUT kurzer HSS-Spiralbohrer Typ N mit Ø 3,4 mm eignet sich gut für legierten und unlegierten Stahl, Gusseisen sowie für Nichteisenmetalle und Kunststoffe; bei sehr harten Werkstoffen ist eine geeignete Schnittgeschwindigkeit und Kühlung empfehlenswert. Kann der Spiralbohrer von MetavCUT mit einer Handbohrmaschine verwendet werden? Ja, der MetavCUT kurzer HSS-Spiralbohrer Typ N wurde für den Einsatz an Handbohrmaschine und an stationären Maschinen konzipiert; die kurze Ausführung erhöht die Stabilität bei handgeführten Anwendungen. Wie beeinflusst der 118° Spitzenwinkel die Bohrleistung des MetavCUT Spiralbohrers? Der 118° Spitzenwinkel des MetavCUT kurzen HSS-Spiralbohrers Typ N erleichtert das Zentrieren und reduziert die Anbohrzeit bei üblichen Metallarbeiten; für besonders harte Werkstoffe kann ein größerer Winkel vorteilhaft sein. Brauche ich Vorbohrungen, wenn ich den MetavCUT Spiralbohrer einsetze? Bei Ø 3,4 mm ist Direktbohren im Standardbereich möglich; für präzise Passungen empfiehlt sich jedoch ein Zentrierbohrer oder eine kleine Vorbohrung, um Wandern und Ausrisse zu vermeiden. {"@context":"https://schema.org","@graph":[{"@type":"Product","@id":"#40034-FDA","sku":"40034-FDA","mpn":"40034-FDA","name":"Spiralbohrer 40034-FDA","description":"Kurzer HSS-Spiralbohrer Typ N Ø 3,4 mm, 118° Spitzenwinkel, schwarz, kurze Ausführung nach DIN 338; geeignet für Metallbohrungen in legiertem und unlegiertem Stahl, Gusseisen, Nichteisenmetallen und Kunststoffen; erhöhte Stabilität durch verkürzte Auskraglänge und rollgewalzte Fertigung.","image":["https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741b/logo-metav-1200-1200.png","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741e/logo-metav-1200-900.png","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png"],"additionalProperty":[{"@type":"PropertyValue","name":"Bezeichnung","value":"Spiralbohrer"},{"@type":"PropertyValue","name":"Marke/Hersteller","value":"MetavCUT"},{"@type":"PropertyValue","name":"Durchmesser","value":"3,4 mm"},{"@type":"PropertyValue","name":"Spiralänge","value":"39 mm"},{"@type":"PropertyValue","name":"Gesamtlänge","value":"70 mm"},{"@type":"PropertyValue","name":"Spitzenwinkel","value":"118°"},{"@type":"PropertyValue","name":"Typ","value":"Typ N"},{"@type":"PropertyValue","name":"Ausführung","value":"kurz"},{"@type":"PropertyValue","name":"Material","value":"HSS"},{"@type":"PropertyValue","name":"Farbe","value":"schwarz"},{"@type":"PropertyValue","name":"Norm","value":"DIN 338"},{"@type":"PropertyValue","name":"Für Bohrmaschine","value":"Handbohrmaschine"},{"@type":"PropertyValue","name":"Anwendung","value":"Bohrer für Metall"}]},{"@type":"FAQPage","mainEntity":[{"@type":"Question","name":"Wie eignet sich der MetavCUT Spiralbohrer für Metallarbeiten und welche Materialien sind möglich?","acceptedAnswer":{"@type":"Answer","text":"Der MetavCUT kurze HSS-Spiralbohrer Typ N Ø 3,4 mm eignet sich für legierten und unlegierten Stahl, Gusseisen sowie für Nichteisenmetalle und Kunststoffe; bei sehr harten Werkstoffen empfiehlt sich angepasste Schnittgeschwindigkeit und Kühlung."}},{"@type":"Question","name":"Kann der MetavCUT Spiralbohrer mit einer Handbohrmaschine verwendet werden?","acceptedAnswer":{"@type":"Answer","text":"Ja, der MetavCUT kurze HSS-Spiralbohrer Typ N wurde für den Einsatz an Handbohrmaschine und an stationären Maschinen konzipiert; die kurze Ausführung erhöht die Stabilität bei handgeführten Anwendungen."}},{"@type":"Question","name":"Wie beeinflusst der 118° Spitzenwinkel die Bohrleistung des MetavCUT Spiralbohrers?","acceptedAnswer":{"@type":"Answer","text":"Der 118° Spitzenwinkel des MetavCUT kurzen HSS-Spiralbohrers Typ N erleichtert das Zentrieren und reduziert die Anbohrzeit bei üblichen Metallarbeiten; für besonders harte Werkstoffe kann ein größerer Winkel vorteilhaft sein."}},{"@type":"Question","name":"Brauche ich Vorbohrungen, wenn ich den MetavCUT Spiralbohrer einsetze?","acceptedAnswer":{"@type":"Answer","text":"Bei Ø 3,4 mm ist Direktbohren im Standardbereich möglich; für präzise Passungen empfiehlt sich jedoch ein Zentrierbohrer oder eine kleine Vorbohrung, um Wandern und Ausrisse zu vermeiden."}}]},{"@type":"ItemPage","url":"https://metav-shop.de/produkt/40034-FDA","dateModified":"2026-05-04T12:00:00+01:00","author":{"@type":"Person","name":"Stephan Bayer","url":"https://www.linkedin.com/in/stephan-bayer/"},"publisher":{"@type":"Organization","name":"Metav Werkzeuge GmbH","url":"https://metav-shop.de","logo":{"@type":"ImageObject","url":"https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png","width":1200,"height":675},"address":{"@type":"PostalAddress","streetAddress":"Parkring 45","postalCode":"46446","addressLocality":"Emmerich","addressCountry":"DE"},"telephone":"+49 2822 7131930","email":"info@metav-werkzeuge.com"},"about":[{"@type":"Thing","name":"Spiralbohrer"},{"@type":"Thing","name":"HSS Kurzbohrer"},{"@type":"Thing","name":"DIN 338 Kurze Ausführung"}],"mentions":[{"@type":"Thing","name":"MetavCUT"},{"@type":"Thing","name":"Typ N Normalspirale"},{"@type":"Thing","name":"118° Spitzenwinkel"},{"@type":"Thing","name":"Rollgewalzte Fertigung"}]}]

Body Drill (Karosseriebohrer) — 3.4 mm, 135° Tip, HSS-G, Double‑Sided, Bright Finished The Body Drill is a double‑sided Twist Drill by MetavCUT for metalworking in Drilling Machines, designed for precise holes in sheet and solid materials. Body Drill 3.4 mm Diameter for metal applications Double‑Sided design for continued use when one tip dulls HSS‑G Material for sharp cutting and high roundness Fully ground shank for accurate runout and precise holes 135° Tip Angle optimized for harder materials like stainless steel High performance through advanced HSS‑G geometry This Twist Drill uses HSS‑G Material and a 135° Tip Angle, delivering a clear benefit: reduced bit walking and improved centring on hard surfaces. The Ground flute geometry produces very sharp cutting edges and excellent Roundness, which supports faster, cleaner holes in Steel and Cast Iron. For users who demand repeatable precision, this configuration minimises rework and improves hole quality with less manual alignment. Durable, practical design for workshop use A Double‑Sided execution means the tool functions like two bits in one: if one tip becomes blunt, the bit can be reversed and the second tip used immediately. The Fully Ground Shank ensures low runout in Chucks and improved concentricity, which is particularly useful for bodywork and sheet‑metal tasks. This short, stable design is well suited to operations where compactness and rigidity reduce vibration and improve finish. Targeted applications and material suitability Engineered for metalworking, the drill is recommended for alloyed and unalloyed Steel, Cast Iron, Non‑Ferrous Metals and Hard Plastics. Its geometry makes it a reliable choice for technicians working on automotive body panels, fabrication shops and maintenance tasks. When the task demands clean holes in tougher substrates, this Twist Drill offers the necessary cutting geometry and rigidity to meet professional expectations. Handling advice to maximise tool life and hole quality To achieve optimal results with this Body Drill, apply appropriate cutting fluid and moderate feed to avoid excessive heat; the Ground construction yields sharp edges but can be more brittle than rolled tools. Using a Drill Press or stable Drilling Machine is advisable for deeper or critical holes. The 135° Tip reduces initial penetration forces and improves centring on hard materials, so adjusting feed and speed to the workpiece increases lifetime and hole quality. We recommend MetavCUT’s Body Drill for demanding metalwork — for personalised technical advice or to check suitability for specific applications please contact METAV Werkzeuge: info@metav-werkzeuge.com | +49 2822 7131930 | WhatsApp +49 170 2837271 Bezeichnung: Body Drill Marke: MetavCUT SKU: 58034-FDA Label: Karosseriebohrer Ausführung: double sided Farbe: bright finished Für Bohrmaschine: Drilling Machine Spiral Length: 10 Spitzenwinkel: 135° Durchmesser: 3,4 Gesamtlänge: 46 Material: HSS-G Schaft Ausführung: fully ground Modellserie: Standard Line Anwendung: Drills for metal Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the best use for the Body Drill from MetavCUT and which machines suit it? The MetavCUT Body Drill (Twist Drill) is designed primarily for metalworking and is best used in a stable Drilling Machine or Drill Press; it performs well on sheet and solid metal components and offers improved centring due to its geometry. Can the MetavCUT Body Drill (Twist Drill) be used for different metals and plastics? Yes, the MetavCUT Body Drill is suitable for alloyed and unalloyed Steel, Cast Iron, Non‑Ferrous Metals and Hard Plastics; its HSS‑G construction and 135° Tip Angle are chosen to handle a variety of tougher materials effectively. For what is a Twist Drill used? A Twist Drill is mainly applied when machining high‑strength materials and larger diameters. The design is relatively easy to grind and withstands higher loads, making it suitable for bodywork and thin‑sheet holes. Which three drill types exist? There are Metal Drills, Wood Drills and Stone/Concrete Drills, each optimised in geometry and cutting edge for their respective material groups. Why are Twist Drills sharpened at the tip? Sharpening the tip reduces the cross‑cut at the point of the Twist Drill, significantly lowering friction and the required feed force while improving the bit’s ability to centre in the workpiece. Can you drill wood with a Twist Drill? A Metal Drill can be used in wood, but guidance and finish are inferior compared with dedicated Wood Drills. Metal Drill bits are easier to resharpen and have lower self‑feed tendencies. For which drilling depths is the Twist Drill the most used tool? A solid bore is typically made with a Twist Drill. For diameters up to 20 mm and drilling depths up to 100 mm, the Twist Drill is the most frequently used tool. Is HSS or HSSE better? The common assumption that HSSE steels are inherently superior to standard HSS is incorrect; the decision should be based on actual working conditions and whether they justify the higher price of HSSE for the intended application.

Twist Drill Type N — 3.4 mm, 135° Point Angle, Extra Short, Bright Finished, HSS‑G (DIN 1897) by MetavCUT The Twist Drill Type N is an extra‑short HSS‑G drill bit designed for Hand Drilling Machines, optimised for precise metalworking in tight spaces. Extra‑short design for greater stability 135° point angle for Harder Materials HSS‑G: up to 40% faster drilling Cylindrical shank fits standard chucks DIN 1897 compliant for consistent fit Faster metal drilling with lower feed force The Twist Drill delivers high efficiency when working with alloyed and unalloyed Steel, Cast Steel, Cast Iron, Sintered Iron, Tempered Iron, Non‑Ferrous Metals and Hard Plastics. Thanks to its HSS‑G material and the ground geometry, drilling can be performed up to 40% faster while requiring significantly less axial force. This means shorter cycle times and reduced operator fatigue when performing repetitive holes in demanding materials. Extra‑short geometry increases stability and reduces breakage The extra‑short execution offers a shorter overall length and reduced flute length compared with standard DIN 1897 bits, which improves torsional resistance and lowers the risk of breakage. This design is particularly advantageous for drilling in thin‑walled components or when working in confined setups where a long tool would be impractical. The compact geometry supports controlled chip evacuation and steadier hole starts. 135° point angle and Type N spiral explained A 135° point angle is suited for harder workpiece materials because it reduces the tendency to wander and shortens the initial bite time. The Type N designation denotes the classic normal spiral for metalworking; it is designed for efficient chip removal in metal and stable machining of tougher alloys. For users less familiar with these terms: the point angle determines entry behaviour, and a larger angle generally improves centring and reduces required thrust for hard materials. Universal shank and compatibility with hand drills The cylindrical shank ensures compatibility with standard three‑jaw chucks, offering universal clamping for workshop and maintenance applications. As a result, the bit is well suited to Hand Drilling Machines and Angle Drills. Note that a smooth round shank can be more prone to slipping under very high torque compared with keyed or hex shanks; use appropriate chuck clamping to prevent slippage. Who benefits from this short HSS metal drill This short Twist Drill is aimed at technicians, mechanics and maintenance personnel who need reliable, fast holes in metal under space constraints. It is a practical choice for fabricators working with sheet metal, profile sections and machine repair tasks where a robust, short tool reduces vibration and breakage risk. For hobbyists, it offers easier handling when access to the workpiece is restricted. MetavCUT recommends this Type N Twist Drill for precision metalworking in confined setups — for expert guidance and to confirm suitability contact METAV Werkzeuge: 📧 info@metav-werkzeuge.com; ☎️ +49 2822 7131930; ✔️ WhatsApp +49 170 2837271 Designation: Twist Drill Marke: MetavCUT SKU: 56034-FDA Diameter: 3.4 mm Point Angle: 135° Execution: Extra short Colour / Finish: Bright finished Material: HSS‑G Type: Type N Shaft Design: Cylindrical shank Overall Length: 46 mm Spiral Length / Flute Length: 16 mm Applicable Machine: Hand Drilling Machine (Drilling Machine) Application: Drills for metal Standard: DIN 1897 Model Series: Standard Line Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What materials is the MetavCUT Twist Drill Type N best suited for? The MetavCUT Twist Drill Type N is primarily intended for metalworking and performs well in alloyed and unalloyed Steel, Cast Steel, Cast Iron, Sintered Iron, Tempered Iron, Non‑Ferrous Metals and Hard Plastics; its HSS‑G composition and Type N spiral optimise chip removal and tool life in these materials. Can the Twist Drill be used in an angle drill or only in straight hand drills? The Twist Drill with a cylindrical shank is designed to be clamped in standard three‑jaw chucks, so it is compatible with both straight Hand Drilling Machines and many Angle Drills; ensure secure clamping to avoid slippage under higher torque. For what is a Twist Drill used? It is mainly applied to the machining of high‑strength workpieces and larger drill diameters. The Twist Drill geometry is easy to regrind and withstands higher loads. Which three drill types exist? There are Metal drills, Wood drills and Stone/Concrete drills. Why are Twist Drills sharpened (pointed)? Sharpening reduces the cross‑cut at the tip of the Twist Drill, which significantly lowers friction and therefore requires lower feed forces while improving centring in the workpiece. Can you drill wood with a Twist Drill? A Metal drill can be used in wood, but guidance is poorer and the hole finish is less clean; however, such bits are easier to resharpen and show lower self‑feeding tendency. For which drill depths is the Twist Drill most used? A through hole in solid material is typically performed with a Twist Drill. For diameters up to 20 mm and drill depths up to 100 mm, the Twist Drill is the most frequently used tool. Is HSS or HSSE better? The common belief that HSSE steels are categorically superior to standard HSS is incorrect; consider your working conditions carefully to decide whether the higher cost of HSSE is justified.

Spiralbohrer 3,4 mm, HSS-G, kurz (DIN 338) – Typ N, 135°, blank, geschliffener Schaft von MetavCUT Der Spiralbohrer ist ein kurzer HSS-G Kurzbohrer für präzise Metallbohrungen an Handbohrmaschine und stationären Maschinen. Hohe Stabilität durch kurze Ausführung Schnelleres Bohren dank geschliffener Geometrie Optimiert für legierte und unlegierte Stähle 135° Spitze für bessere Anbohrbarkeit bei Edelstahl Materialqualität für lange Standzeit und saubere Bohrbilder Aus besonders hartem HSS-G gefertigt, bietet dieser Kurzbohrer eine hohe Schnittfestigkeit und eine dauerhaft scharfe Schneidkante. Die geschliffene Ausführung sorgt für sehr genaue Spannuten und eine gleichmäßige Spanabfuhr, wodurch saubere Bohrbilder entstehen. Für Anwender bedeutet das weniger Nacharbeit und höhere Ausbringung bei der Bearbeitung von Stahl, Gusseisen und anderen Metallen. Präzision und Einsatzgebiet für den Werkstattalltag Im Standard-Bereich mit 3,4 mm Durchmesser eignet sich der Bohrer besonders für allgemeine Werkstattarbeiten, Montage und DIY-Projekte. Die kurze Auskraglänge erhöht die Steifigkeit, reduziert Vibrationen und minimiert das Wandern beim Anbohren. Deshalb ist der Kurzbohrer ideal für Bohrungen in dünnen bis mittleren Blechen sowie für das Bohren an Handbohrmaschine und stationären Säulenbohrmaschinen. Technische Anpassungen und Arbeitshinweise für bessere Ergebnisse Die 135° Spitze ist speziell für härtere Werkstoffe ausgelegt und reduziert das Durchlaufen beim Anbohren. Bei hoher Werkstückhärte empfiehlt sich eine Kühlung und ein moderater Vorschub, um die Lebensdauer des Werkzeugs zu schonen. Ferner wird das Vorzentrieren mit einem Zentrierbohrer empfohlen, um die Rundlaufgenauigkeit zu erhöhen und die Querschneide zu entlasten. Für wen dieser Bohrer entwickelt wurde und welchen Nutzen er stiftet Die Profi Line richtet sich an Anwender, die Wert auf Präzision, Standzeit und Wiederholgenauigkeit legen. Betriebe, Werkstätten und ambitionierte Heimwerker profitieren gleichermaßen von der Stabilität der kurzen Ausführung, die besonders bei anspruchsvollen Metallarbeiten Zeit spart und die Qualität der Bohrungen verbessert. Die klare Normierung nach DIN 338 stellt Kompatibilität mit gängigen Aufnahmen sicher. Empfehlung: Den MetavCUT Profi Line Kurzbohrer für präzise Metallbohrungen wählen — bei Fragen oder für technische Beratung wenden Sie sich bitte an METAV Werkzeuge per eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 Bezeichnung: Spiralbohrer Marke: MetavCUT SKU: 48034-FDA Durchmesser: 3,4 mm Spitzenwinkel: 135° Typ: Typ N (Normalspirale) Material: HSS-G (geschliffen) Ausführung: kurz Schaft Ausführung: geschliffen (Zylinderschaft) Farbe: blank Gesamtlänge: 65 mm Spirallänge: 36 mm Für Bohrmaschine: Handbohrmaschine und stationäre Maschinen Norm: DIN 338 Modellserie: Profi Line Anwendung: Bohrer für Metall, geeignet für legierte und unlegierte Stahlarten, Gussstahl, Gusseisen, Sintereisen, Temperguss, Nichteisenmetalle und Hartkunststoff Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ Welche Materialien lassen sich mit dem MetavCUT Spiralbohrer 3,4 mm zuverlässig bearbeiten? Der MetavCUT Spiralbohrer 3,4 mm aus HSS-G ist ausgelegt für die Bearbeitung von legiertem und unlegiertem Stahl, Gussstahl, Gusseisen, Sintereisen, Temperguss sowie Nichteisenmetallen und Hartkunststoff und liefert bei angepasster Kühlung und Vorschub saubere Ergebnisse. Eignet sich der MetavCUT Spiralbohrer 3,4 mm für Handbohrmaschine oder nur für stationäre Maschinen? Der MetavCUT Spiralbohrer 3,4 mm ist für den Einsatz an Handbohrmaschine und an stationären Maschinen geeignet; aufgrund der kurzen Ausführung empfiehlt sich bei Handbetrieb eine ruhige Führung und gegebenenfalls ein geringerer Vorschub für längere Standzeit. Wie beeinflusst die 135° Spitze die Bohrleistung des MetavCUT Spiralbohrers 3,4 mm? Die 135° Spitze des MetavCUT Spiralbohrers 3,4 mm verkürzt die Anbohrzeit bei härteren Werkstoffen und verbessert die Zentrierwirkung, wodurch das Durchlaufen reduziert und die Bohrqualität erhöht wird. Brauche ich spezielles Kühlmittel für den MetavCUT Spiralbohrer 3,4 mm bei Edelstahl? Für Edelstahl empfiehlt sich beim Einsatz des MetavCUT Spiralbohrers 3,4 mm eine geeignete Kühlung oder Schneidöl, um Wärmeentwicklung zu reduzieren und die Lebensdauer des Bohrers zu erhöhen. Wer bietet Unterstützung, wenn technische Fragen zum MetavCUT Spiralbohrer 3,4 mm auftreten? METAV Werkzeuge bietet kompetente Beratung zu diesem MetavCUT Spiralbohrer 3,4 mm; bei Unsicherheiten erreichen Sie den Kundendienst per eMail info@metav-werkzeuge.com, Telefon +49 2822 7131930 oder WhatsApp +49 170 2837271. {"@context":"https://schema.org","@graph":[{"@type":"Product","@id":"#48034-FDA","sku":"48034-FDA","mpn":"48034-FDA","gtin13":"","name":"Spiralbohrer 3,4 mm, HSS-G, kurz, Typ N, 135°, blank","description":"Kurzspiralbohrer 3,4 mm aus HSS-G, geschliffener Zylinderschaft, Kurz-Ausführung nach DIN 338, Typ N (Normalspirale) mit 135° Spitzenwinkel; geeignet für legierte und unlegierte Stähle, Gussstahl, Gusseisen, Sintereisen, Temperguss, Nichteisenmetalle und Hartkunststoff; ideal für Handbohrmaschine und stationäre Maschinen; Profi Line von MetavCUT.","image":["https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741b/logo-metav-1200-1200.png","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741e/logo-metav-1200-900.png","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png"],"additionalProperty":[{"@type":"PropertyValue","name":"Bezeichnung","value":"Spiralbohrer"},{"@type":"PropertyValue","name":"Durchmesser","value":"3,4 mm"},{"@type":"PropertyValue","name":"Spitzenwinkel","value":"135°"},{"@type":"PropertyValue","name":"Typ","value":"Typ N (Normalspirale)"},{"@type":"PropertyValue","name":"Material","value":"HSS-G (geschliffen)"},{"@type":"PropertyValue","name":"Ausführung","value":"kurz"},{"@type":"PropertyValue","name":"Schaft Ausführung","value":"geschliffen (Zylinderschaft)"},{"@type":"PropertyValue","name":"Farbe","value":"blank"},{"@type":"PropertyValue","name":"Gesamtlänge","value":"65 mm"},{"@type":"PropertyValue","name":"Spirallänge","value":"36 mm"},{"@type":"PropertyValue","name":"Für Bohrmaschine","value":"Handbohrmaschine und stationäre Maschinen"},{"@type":"PropertyValue","name":"Norm","value":"DIN 338"},{"@type":"PropertyValue","name":"Modellserie","value":"Profi Line"},{"@type":"PropertyValue","name":"Anwendung","value":"Bohrer für Metall, geeignet für legierte und unlegierte Stahlarten, Gussstahl, Gusseisen, Sintereisen, Temperguss, Nichteisenmetalle und Hartkunststoff"},{"@type":"PropertyValue","name":"Hersteller","value":"MetavCUT"}],"offers":{}},{"@type":"FAQPage","mainEntity":[{"@type":"Question","name":"Welche Materialien lassen sich mit dem MetavCUT Spiralbohrer 3,4 mm zuverlässig bearbeiten?","acceptedAnswer":{"@type":"Answer","text":"Der Spiralbohrer 3,4 mm von MetavCUT aus HSS-G eignet sich für legierten und unlegierten Stahl, Gussstahl, Gusseisen, Sintereisen, Temperguss, Nichteisenmetalle und Hartkunststoff; bei harten Werkstoffen empfiehlt sich Kühlung und angepasster Vorschub."}},{"@type":"Question","name":"Eignet sich der MetavCUT Spiralbohrer 3,4 mm für Handbohrmaschine oder nur für stationäre Maschinen?","acceptedAnswer":{"@type":"Answer","text":"Der MetavCUT Spiralbohrer 3,4 mm ist sowohl für Handbohrmaschine als auch für stationäre Maschinen geeignet; die kurze Ausführung erhöht die Stabilität, bei Handbetrieb ist ruhige Führung und moderater Vorschub empfehlenswert."}},{"@type":"Question","name":"Wie beeinflusst die 135° Spitze die Bohrleistung des MetavCUT Spiralbohrers 3,4 mm?","acceptedAnswer":{"@type":"Answer","text":"Der 135° Spitzenwinkel des MetavCUT Spiralbohrers 3,4 mm verkürzt die Anbohrzeit bei härteren Werkstoffen, verbessert die Zentrierwirkung und reduziert das Durchlaufen, wodurch die Bohrqualität steigt."}},{"@type":"Question","name":"Brauche ich spezielles Kühlmittel für den MetavCUT Spiralbohrer 3,4 mm bei Edelstahl?","acceptedAnswer":{"@type":"Answer","text":"Bei Edelstahl empfiehlt sich beim MetavCUT Spiralbohrer 3,4 mm der Einsatz geeigneter Kühlung oder Schneidöl, um Wärmeentwicklung zu reduzieren und die Lebensdauer des Bohrers zu erhöhen."}},{"@type":"Question","name":"Wer bietet Unterstützung, wenn technische Fragen zum MetavCUT Spiralbohrer 3,4 mm auftreten?","acceptedAnswer":{"@type":"Answer","text":"Metav Werkzeuge bietet technische Beratung zum MetavCUT Spiralbohrer 3,4 mm; Kontakt per E-Mail info@metav-werkzeuge.com, Telefon +49 2822 7131930 oder WhatsApp +49 170 2837271."}}]},{"@type":"ItemPage","url":"https://metav-shop.de/product/48034-FDA","dateModified":"2026-05-04T12:00:00+01:00","author":{"@type":"Person","name":"Stephan Bayer","url":"https://www.linkedin.com/in/stephan-bayer/"},"publisher":{"@type":"Organization","name":"Metav Werkzeuge GmbH","url":"https://metav-shop.de","logo":{"@type":"ImageObject","url":"https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png","width":1200,"height":675},"address":{"@type":"PostalAddress","streetAddress":"Parkring 45","postalCode":"46446","addressLocality":"Emmerich","addressCountry":"DE"},"telephone":"+49 2822 7131930","email":"info@metav-werkzeuge.com"},"about":[{"@type":"Thing","name":"Kurzspiralbohrer nach DIN 338"},{"@type":"Thing","name":"Metallbohrungen in Stahl und Guss"},{"@type":"Thing","name":"Profi Line von MetavCUT"}],"mentions":[{"@type":"Thing","name":"Geschliffener Zylinderschaft"},{"@type":"Thing","name":"135° Spitzenwinkel"},{"@type":"Thing","name":"Typ N Normalspirale"},{"@type":"Thing","name":"Anwendung: Handbohrmaschine und stationäre Maschinen"}]}]}

Twist Drill — Type N, 3.5 mm, 118°, short, black, HSS, DIN 338 (MetavCUT) The Twist Drill Type N is a compact metal-drilling bit designed for precise work with a Drilling Machine or Hand Drill, offering a 3.5 mm diameter and a 118° tip angle for reliable centring and clean holes. HSS construction for durable metal drilling Short design per DIN 338 for high stability 118° tip angle for better centring on curved surfaces 3.5 mm diameter for precise, small-diameter holes Suitable for use with a Hand Drill and Drilling Machine Precision and Material Strength for Consistent Results The HSS composition delivers a combination of durability and elasticity that reduces breakage risk during typical metalworking tasks. With the 3.5 mm diameter and a 118° tip angle, the bit penetrates smoothly while maintaining accurate centring. Compliance with DIN 338 ensures consistent geometry and reliable production tolerances, making this short Twist Drill a trustworthy choice for repeatable hole quality in demanding shop environments. Short Geometry for Maximum Stability and Accuracy A short overall length and a reduced protrusion from the chuck minimise bending and vibration, improving concentricity and hole accuracy. The 39 mm spiral length and 70 mm overall length are optimised to reduce runout when used in a Drilling Machine or Hand Drill, especially for smaller diameters. This means less rework, faster setup and more precise holes when working on components where tight tolerances matter. Optimised for Metalworking — Versatile Application Range The Type N spiral profile is the classic choice for metal; the High Speed Steel manufacturing makes the bit suitable for alloyed and unalloyed steel, cast iron, non-ferrous metals and many plastics. For small diameters under 6 mm the roll-formed HSS construction reduces the chance of breakage and supports steady drilling performance. Users benefit from a tool engineered to handle standard metal-processing tasks efficiently and with predictable tool life. Who Benefits and Where to Use It This Twist Drill is aimed at professional workshops, maintenance technicians and precision hobbyists who require reliable, short-length metal-drilling performance. The compact design is especially advantageous in confined setups or on jigged components where minimal overhang is critical. Backed by the MetavCUT brand, customers gain access to technical guidance and support through METAV Werkzeuge for any application questions or complex requirements. For precision metalworking choose the MetavCUT Twist Drill Type N — for tailored advice and expert consultation contact METAV Werkzeuge at info@metav-werkzeuge.com, +49 2822 7131930 or WhatsApp +49 170 2837271 Designation: Twist Drill Brand: MetavCUT SKU: 40035-FDA Diameter: 3.5 mm Spiral length: 39 mm Overall length: 70 mm Tip angle: 118° Material: HSS (High Speed Steel) Type: Type N Execution: short Colour: black Application: Drills for metal / For Drilling Machine (Hand Drill) Standard: DIN 338 Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What materials is the Twist Drill Type N from MetavCUT suitable for? The MetavCUT Twist Drill Type N is intended primarily for metalworking; its HSS composition allows drilling in alloyed and unalloyed steel, cast iron, non-ferrous metals and many plastics while offering dependable wear resistance and consistent hole quality. How does the short execution of this MetavCUT Twist Drill improve drilling results? A short Twist Drill from MetavCUT reduces overhang and bending, which increases stability and concentricity during drilling, resulting in cleaner holes and less tool deflection when used in a Drilling Machine or Hand Drill. For what is a Twist Drill used? A Twist Drill is mainly applied to the machining of high-strength materials and for larger drill diameters. Its shape is easy to sharpen and withstands greater loads, making it suitable for demanding metalworking tasks. Which three drill types exist? The three common drill types are metal drills, wood drills and masonry/concrete drills. Why are Twist Drills sharpened at the tip? Sharpening reduces the cross-cut at the tip of the Twist Drill, which lowers friction and required feed forces; this also improves centring of the tip in the workpiece. Can a Twist Drill be used to drill wood? A metal Twist Drill can be used in wood, but guidance and finish are inferior compared with wood-specific bits; however, metal bits are easier to resharpen and show less self-feeding tendency. For which drilling depths is the Twist Drill most commonly used? Solid drilling is typically executed with a Twist Drill. For diameters up to 20 mm and drilling depths up to 100 mm, the Twist Drill is the most frequently used tool. Is HSS or HSSE better? The general belief that HSSE is always superior to HSS is incorrect; choose based on actual working conditions and whether the performance justifies higher cost.

Twist Drill – Short Type N, 3.5 mm, 135°, 5% Cobalt-Alloyed, HSS‑E, Fully Ground, DIN 338 (MetavCUT) The Twist Drill is a short Type N drill designed for precise metalworking in hand drills and drilling machines. Short design for high stability and precision 3.5 mm diameter for fine, precise holes 135° tip for harder materials like stainless steel 5% cobalt-alloyed HSS‑E for increased wear resistance Fully ground flutes for clean, accurate holes Engineered for precise metal drilling with reduced flex This short Twist Drill is optimised for metal applications where dimensional accuracy matters. With a 3.5 mm diameter and a 135° point angle, it reduces walking on hard surfaces and shortens the pilot time when entering stainless steel or other tough alloys. The geometry follows DIN 338, which classifies short HSS drills with a cylindrical shank. As a result, users benefit from repeatable hole position and improved concentricity when working on both stationary and portable machines. Short length and fully ground construction for stability The reduced overall length and shorter overhang translate into less deflection and improved control during drilling. The 39 mm spiral length and 70 mm overall length keep the cutting forces close to the chuck, while the Fully Ground flute geometry ensures a sharp cutting edge and excellent roundness of the hole. This combination is particularly helpful for precision tasks and reduces the risk of chattering when drilling through thicker or harder sections of metal. Material selection and wear resistance for demanding tasks Manufactured from HSS‑E with 5% cobalt-alloyed composition, this short spiral drill offers enhanced red hardness and wear resistance compared with standard HSS. The cobalt addition supports higher cutting temperatures and extends tool life in continuous or interrupted cutting conditions. Being a Type N (normal spiral) geometry, it is primarily aimed at metalworking; the flute design facilitates reliable chip evacuation for cast iron, alloyed and unalloyed steel, and many non‑ferrous metals. Practical recommendations for safe, accurate use For best results clamp the workpiece securely, select appropriate spindle speeds and use coolant for stainless and other heat‑resistant alloys. The short design suits precise workshop tasks, maintenance and production runs where hole quality and repeatability are priorities. A short spiral drill is less suitable for deep, through‑holes beyond its flute capacity; for deeper holes consider a longer, purpose‑designed drill. MetavCUT's short design is ideal for users seeking controlled, clean holes with reduced breakage risk when used with adequate support and cooling. We recommend MetavCUT's short Twist Drill for demanding metalworking — for tailored technical advice contact METAV Werkzeuge: info@metav-werkzeuge.com | Phone: +49 2822 7131930 | WhatsApp: +49 170 2837271. Technical Information Designation: Twist Drill Brand: MetavCUT SKU: 47035-FDA Type: Type N Diameter: 3.5 mm Point angle: 135° Spiral length: 39 mm Overall length: 70 mm Execution: Short Shaft finish: Fully Ground Material: HSS‑E Cobalt content / Colour: 5% cobalt-alloyed For machine: Drilling Machine / Hand Drill Model series: Standard Line Norm: DIN 338 Application: Drills for metal Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What materials is the Twist Drill by MetavCUT (Type N) suitable for? The MetavCUT Twist Drill (Type N) is primarily intended for metalworking; its HSS‑E composition with 5% cobalt‑alloying makes it suitable for alloyed and unalloyed steel, cast iron and many non‑ferrous metals. For stainless steel or other heat‑resistant materials use cutting fluid and moderate speed to preserve tool life. Which three drill types exist? Common categories are metal drills, wood drills and stone/concrete drills. The MetavCUT Twist Drill belongs to the metal drill group and is optimised for metal applications rather than woodworking or masonry.

Karosseriebohrer von MetavCUT — 3,5 mm, 135°, doppelseitig, schwarz ohne Fase, HSS-G, geschliffen Der Karosseriebohrer ist ein doppelseitiger HSS-G Bohrer für präzise Metallbohrungen mit Handbohrmaschine und eignet sich besonders für Karosserie- und Blecharbeiten. Karosseriebohrer von MetavCUT Doppelseitiger Doppelendbohrer für beidseitigen Einsatz Geschliffenes HSS-G für saubere, präzise Bohrlöcher 135° Spitzenwinkel für härtere Werkstoffe Kurz und steif mit 13 mm Spirallänge, 55 mm Gesamtlänge Hohe Schneidleistung für Stahl und Guss gewährleisten schnelle Ergebnisse Der Bohrer nutzt HSS-G Werkzeugstahl in geschliffener Ausführung und kombiniert hohe Schnitthaltigkeit mit sauberen Bohrbildern. Durch den 135° Spitzenwinkel lässt sich die Anbohrzeit bei härteren Werkstoffen reduzieren, weil die Spitze kontrollierter eintritt und das Wandern minimiert wird. Diese Kombination sorgt für einen spürbaren Vorteil bei legiertem und unlegiertem Stahl sowie Gusseisen, ohne übertriebene Vorschubkräfte einsetzen zu müssen. Geschliffene Schaftgeometrie sorgt für Präzision und Rundlauf Die voll geschliffene Schaft- und Spannutengeometrie erhöht die Präzision und den Rundlauf, was besonders bei feineren Bohrungen wichtig ist. Geschliffene Bohrer bieten schärfere Schneiden und genauere Bohrdurchmesser als gewalzte Varianten, weshalb sie bevorzugt für saubere Passungen in Metall verwendet werden. Anwender profitieren von weniger Nacharbeit und gleichmäßigeren Bohrbildern, wenn die Maschine einen guten Rundlauf liefert. Konzipiert für Handbohrmaschine und typische Blechanwendungen Dieses Werkzeug ist dem Standard-Bereich zuzuordnen und deshalb ideal für den Einsatz mit Handbohrmaschinen bei dünnen bis mittleren Blechen und Profilen. Die doppelseitige Ausführung erlaubt schnellen Austausch der Bohrspitze durch Umdrehen, was in der Karosserie- und Blechbearbeitung Zeit spart. Für sehr tiefe Löcher oder gehärtete Serienbauteile sollte auf spezialisierte Werkzeuge ausgewichen werden. Praktische Hinweise zur Anwendung und zur Lebensdauer Für längere Standzeiten empfiehlt sich der Einsatz von Schneidöl oder Kühlmittel und moderates Vorschubverhalten, insbesondere bei zähen Materialien. Die kurzbauweise mit 13 mm Spirallänge reduziert Durchbiegung und fördert stabile Bohrbedingungen. Bitte darauf achten, vor dem Bohren anzupunkten und bei Bedarf schrittweise aufzubohren, um die Querschneide zu entlasten und Bruchrisiken zu minimieren. Empfehlung von MetavCUT: Für präzise Karosserie- und Blechbohrungen diesen Karosseriebohrer verwenden; bei Unsicherheiten oder technischen Fragen steht METAV Werkzeuge gern zur Verfügung, erreichbar per eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 Bezeichnung: Karosseriebohrer Marke: MetavCUT SKU: 59035-FDA Durchmesser: 3,5 mm Spitzenwinkel: 135° Ausführung: doppelseitig (Doppelendbohrer) Farbe: schwarz ohne Fase Material: HSS-G Schaft Ausführung: geschliffen Gesamtlänge: 55 mm Spirallänge: 13 mm Für Bohrmaschine: Handbohrmaschine Modellserie: Profi Line Verpackungseinheit: 10 Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ Ist der Karosseriebohrer von MetavCUT für Edelstahl geeignet? Der Karosseriebohrer von MetavCUT ist durch den 135° Spitzenwinkel für härtere Werkstoffe besser geeignet als flachere Spitzen; dennoch empfiehlt sich vorab ein Materialtest und gegebenenfalls Kühlung für zähe Edelstähle. Kann der Karosseriebohrer von MetavCUT in einer Handbohrmaschine eingesetzt werden? Ja, der Karosseriebohrer von MetavCUT ist für den Einsatz mit Handbohrmaschine im Standard-Bereich konzipiert und bietet bei korrekter Maschinenwahl und Anwendung zuverlässig saubere Bohrlöcher. Wie verlängere ich die Lebensdauer des Karosseriebohrers von MetavCUT? Zur längeren Standzeit den Karosseriebohrer von MetavCUT mit Schneidöl oder Kühlmittel verwenden, moderaten Vorschub wählen und bei Bedarf anpunktieren, um die Schneidkante zu entlasten. Was bringt die doppelseitige Ausführung beim Karosseriebohrer von MetavCUT? Die doppelseitige Bauweise des Karosseriebohrers von MetavCUT erlaubt das schnelle Umdrehen bei Verschleiß, was Ausfallzeiten reduziert und ersetzt praktisch zwei Einzelbohrer. {"@context":"https://schema.org","@graph":[{"@type":"Product","@id":"#59035-FDA","sku":"59035-FDA","mpn":"59035-FDA","name":"Karosseriebohrer 3,5 mm 135° doppelseitig schwarz HSS-G","description":"Karosseriebohrer von MetavCUT, 3,5 mm Durchmesser, 135° Spitzenwinkel, doppelseitig (Doppelendbohrer), schwarz ohne Fase, Material HSS-G, Schaft geschliffen, Gesamtlänge 55 mm, Spirallänge 13 mm; konzipiert für Handbohrmaschine und Blechanwendungen; geschliffene Geometrie für präzise Bohrbilder.","image":["https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741b/logo-metav-1200-1200.png","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741e/logo-metav-1200-900.png","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png"],"additionalProperty":[{"@type":"PropertyValue","name":"Bezeichnung","value":"Karosseriebohrer"},{"@type":"PropertyValue","name":"Marke","value":"MetavCUT"},{"@type":"PropertyValue","name":"Durchmesser","value":"3,5 mm"},{"@type":"PropertyValue","name":"Spitzenwinkel","value":"135°"},{"@type":"PropertyValue","name":"Ausführung","value":"doppelseitig (Doppelendbohrer)"},{"@type":"PropertyValue","name":"Farbe","value":"schwarz ohne Fase"},{"@type":"PropertyValue","name":"Material","value":"HSS-G"},{"@type":"PropertyValue","name":"Schaft Ausführung","value":"geschliffen"},{"@type":"PropertyValue","name":"Gesamtlänge","value":"55 mm"},{"@type":"PropertyValue","name":"Spirallänge","value":"13 mm"},{"@type":"PropertyValue","name":"Für Bohrmaschine","value":"Handbohrmaschine"},{"@type":"PropertyValue","name":"Modellserie","value":"Profi Line"},{"@type":"PropertyValue","name":"Verpackungseinheit","value":"10"},{"@type":"PropertyValue","name":"Anwendung","value":"Bohrer für Metall"},{"@type":"PropertyValue","name":"Typ","value":"Doppelendbohrer"}]},{"@type":"FAQPage","mainEntity":[{"@type":"Question","name":"Ist der Karosseriebohrer von MetavCUT für Edelstahl geeignet?","acceptedAnswer":{"@type":"Answer","text":"Der Karosseriebohrer von MetavCUT mit 135° Spitzenwinkel eignet sich besser für härtere Werkstoffe; vor Einsatz an Edelstahl empfiehlt sich ein Materialtest und gegebenenfalls Kühlung."}},{"@type":"Question","name":"Kann der Karosseriebohrer von MetavCUT in einer Handbohrmaschine eingesetzt werden?","acceptedAnswer":{"@type":"Answer","text":"Ja, der Karosseriebohrer von MetavCUT ist für den Einsatz mit Handbohrmaschine konzipiert und liefert bei korrekter Anwendung saubere Bohrlöcher in dünnen bis mittleren Blechen."}},{"@type":"Question","name":"Wie verlängere ich die Lebensdauer des Karosseriebohrers von MetavCUT?","acceptedAnswer":{"@type":"Answer","text":"Zur längeren Standzeit den Karosseriebohrer von MetavCUT mit Schneidöl oder Kühlmittel verwenden, moderaten Vorschub wählen und vor dem Bohren anpunktieren."}},{"@type":"Question","name":"Was bringt die doppelseitige Ausführung beim Karosseriebohrer von MetavCUT?","acceptedAnswer":{"@type":"Answer","text":"Die doppelseitige Ausführung des Karosseriebohrers von MetavCUT erlaubt das schnelle Umdrehen bei Verschleiß und ersetzt praktisch zwei Einzelbohrer, was Ausfallzeiten reduziert."}}]},{"@type":"ItemPage","url":"https://metav-shop.de/karosseriebohrer-59035-FDA","dateModified":"2026-05-04T12:00:00+01:00","author":{"@type":"Person","name":"Stephan Bayer","url":"https://www.linkedin.com/in/stephan-bayer/"},"publisher":{"@type":"Organization","name":"Metav Werkzeuge GmbH","url":"https://metav-shop.de","logo":{"@type":"ImageObject","url":"https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png","width":1200,"height":675},"address":{"@type":"PostalAddress","streetAddress":"Parkring 45","postalCode":"46446","addressLocality":"Emmerich","addressCountry":"DE"},"telephone":"+49 2822 7131930","email":"info@metav-werkzeuge.com"},"about":[{"@type":"Thing","name":"Karosseriebohrer"},{"@type":"Thing","name":"HSS-G geschliffen"},{"@type":"Thing","name":"Doppelseitiger Doppelendbohrer"}],"mentions":[{"@type":"Thing","name":"Handbohrmaschine empfohlen"},{"@type":"Thing","name":"Einsatz in Blechanwendungen"},{"@type":"Thing","name":"Kurzbauweise für stabile Bohrbedingungen"}]}]}

Karosseriebohrer (Body Drill) — 3.5 mm, 135° Tip, Double‑Sided, Bright Finished, Fully Ground, HSS‑G The Karosseriebohrer is a precision Body Drill designed for metalworking applications, offering a 3.5 mm Diameter, 135° Point Angle and a double‑sided execution with a bright finished surface and fully ground shaft for reliable performance. Double‑ended design for extended tool life Fully ground HSS‑G for precise, clean holes 135° Point Angle optimised for harder metals Suitable for Drilling Machine and Hand Drill use Compact overall length of 55 mm for confined spaces Maximum cutting performance with fully ground HSS‑G The fully ground HSS‑G construction delivers a clear benefit: faster penetration and improved hole quality in metal. CNC grinding creates sharp cutting edges and high concentricity, which reduces wobble and produces clean, round holes. For users requiring precise results in alloyed or unalloyed Steel, Cast Steel, Cast Iron or non‑ferrous Metals, this basis of construction reduces the needed feed force and raises productivity without sacrificing accuracy. Double‑ended design for practical durability in bodywork A double‑sided, short Twist Drill is particularly practical in sheet‑metal and body applications: when one tip becomes blunt, the tool can simply be reversed, offering effectively two operational ends. This space‑saving and cost‑efficient solution is well suited for work on thin sheets, rivet holes and repair operations where quick tool change and robustness matter. 135° point for harder materials and stable centring The 135° Point Angle reduces walking and offers better centring on harder materials like stainless Steel; a larger tip angle shortens the time to engage the workpiece. When paired with the ground flute geometry, this Karosseriebohrer achieves lower friction at the tip and more consistent chip evacuation. For demanding drilling tasks, combine coolant and moderate speeds to balance performance and tool life. Designed for professionals in confined and metalworking environments With an overall length of 55 mm and a 3.5 mm Diameter, this tool from the Standard Line by MetavCUT is aimed at metalworkers, bodyshop technicians and maintenance professionals who require compact, reliable Twist Drills for production and repair. The bright finished surface supports smooth insert and removal, while the robust geometry keeps cycle times short and hole quality high. Choose the MetavCUT Karosseriebohrer with 135° Point Angle for dependable metal drilling — for tailored advice or specification support METAV Werkzeuge provides expert consultation by eMail at info@metav-werkzeuge.com, by Phone +49 2822 7131930 or via WhatsApp +49 170 2837271 Designation: Karosseriebohrer Marke: MetavCUT SKU: 58035-FDA Diameter: 3.5 mm Overall Length: 55 mm Spiral Length: 13 mm Point Angle: 135° Execution: Double‑sided Shaft Finish: Fully ground Material: HSS‑G For Machine: Drilling Machine / Hand Drill Colour: Bright finished Model Series: Standard Line Application: Drills for Metal Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the Karosseriebohrer Twist Drill used for? The Karosseriebohrer from MetavCUT is a Twist Drill primarily used for machining high‑strength materials and larger drill diameters in metalworking. Its double‑ended design and ground HSS‑G geometry make it suitable for bodywork, thin‑sheet holes and tasks that demand quick reversal of a blunt tip while maintaining precision. Which 3 drill types are there? There are three common drill categories: Metal drills, Wood drills and Stone/Concrete drills. The MetavCUT Karosseriebohrer is classified as a Metal drill (Twist Drill) tailored to metal applications rather than wood or masonry.

Spiralbohrer 3,5 mm, 135°, extra lang, blank, HSS-G, DIN 1869 von MetavCUT Der Spiralbohrer von MetavCUT ist ein extra langer HSS‑G‑Bohrer nach DIN 1869 und wurde für tiefe Metallbohrungen in legierten und unlegierten Stählen sowie Gusswerkstoffen entwickelt. Extra lange Bauart für tiefe Bohrungen Geschliffener HSS-G Schaft für saubere Bohrbilder 135° Spitzenwinkel für harte Werkstoffe DIN 1869 mit Tieflochspirale für Metall Gesamtlänge 165 mm, Spirallänge 115 mm Schnelle und präzise Schnittleistung bei harten Materialien Beim Einsatz in Stahl und Gusswerkstoffen zeigt der HSS‑G‑Schliff seine Stärke: Die geschliffene Geometrie sorgt für sehr scharfe Schneiden und eine hohe Rundlaufgenauigkeit, wodurch saubere und maßhaltige Bohrungen erzielt werden. Durch den 135° Spitzenwinkel wird das Anbohren in härteren Werkstoffen erleichtert und die Anbohrzeit verkürzt. Anwender profitieren von reduziertem Kraftaufwand und gleichmäßigem Spanabtransport, was insbesondere bei stationärer Bearbeitung die Effizienz erhöht. Extra lange Ausführung für schwer erreichbare Stellen und tiefe Löcher Die extra lange Ausführung mit Gesamtlänge 165 mm und Spirallänge 115 mm ermöglicht das Bohren tiefer Durchgänge und das Erreichen von schwer zugänglichen Bohrpositionen. Diese Bauform ist ideal, wenn Standardlängen nicht ausreichen und eine längere Arbeitslänge erforderlich ist. Dabei empfiehlt sich der Einsatz in stabilen, stationären Maschinen oder mit stark aufspannbaren Werkstückaufnahmen, um Verkantungen und Bruchrisiken zu minimieren. Vielseitige Einsatzgebiete im Standard‑Bereich für Handwerk und Werkstatt Mit einem Durchmesser von 3,5 mm fällt dieses Bohrmaß in den Standard‑Bereich und eignet sich hervorragend für Werkstatt‑, Montage‑ und DIY‑Arbeiten. Geeignete Anwendungen sind dünne bis mittlere Bleche, Profile und Flachstahl sowie Arbeiten in Aluminium und Hartkunststoff. Für präzise Passungen empfiehlt sich vor dem Endbohren ein Zentrierbohrer, damit der Bohrer nicht „wandert“ und die Maßhaltigkeit gewährleistet bleibt. Praxisgerechte Hinweise für Lebensdauer und beste Ergebnisse Weil geschliffene Ausführungen feiner und spröder als gewalzte Varianten sind, empfiehlt sich die Verwendung mit Kühlmittel und moderater Vorschubkraft, um Überhitzung und Bruch zu vermeiden. Beim Bohren in zähen Werkstoffen reduziert regelmäßiges Nachschmieren die Temperaturbelastung und verlängert die Standzeit. Für tiefe Bohrungen die Späne regelmäßig kontrollieren und gegebenenfalls mehrstufiges Aufbohren erwägen, um die Querschneide zu entlasten. Empfehlung: Für zuverlässige Tiefbohrungen in Stahl und Guss empfehlen wir den Einsatz des MetavCUT Spiralbohrers in HSS‑G‑Ausführung; bei Fragen zur Anwendung steht Metav Werkzeuge per E‑Mail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 sowie WhatsApp +49 170 2837271 gern beratend zur Seite Bezeichnung: Spiralbohrer 3,5 mm extra lang Marke/Hersteller: MetavCUT SKU: 32035-FDA Durchmesser: 3,5 mm Material: HSS-G Ausführung: extra lang Schaft Ausführung: geschliffen Farbe: Blank Norm: DIN 1869 Spitzenwinkel: 135° Gesamtlänge: 165 mm Spirallänge: 115 mm Für Bohrmaschine: Handbohrmaschine Modellserie: Standard Line Anwendung: Bohrer für Metall Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ Welche Materialien lassen sich mit dem Spiralbohrer von MetavCUT bearbeiten? Der Spiralbohrer von MetavCUT in HSS‑G‑Ausführung eignet sich zum Bohren in legierten und unlegierten Stählen, Gussstahl, Gusseisen, Temperguss sowie in Nichteisenmetallen und Hartkunststoffen. Ist der Spiralbohrer von MetavCUT für Handgeführte Bohrmaschinen geeignet? Ja, der Spiralbohrer von MetavCUT mit 3,5 mm ist für den Einsatz in Handbohrmaschinen im Standard‑Bereich geeignet, allerdings sollte bei längeren, tieferen Bohrungen auf stabile Aufspannung geachtet werden, um Bruch zu vermeiden. Wie erhöhe ich die Standzeit des MetavCUT Spiralbohrers? Um die Standzeit des MetavCUT Spiralbohrers zu erhöhen, sollten Kühlschmiermittel verwendet, moderater Vorschub angewendet und bei tiefen Löchern mehrstufig vorgebohrt werden. Was bedeutet „geschliffen“ beim Spiralbohrer von MetavCUT? Geschliffen bedeutet, dass die Geometrie und Spannuten präzise durch Schleifen gefertigt wurden; beim MetavCUT Spiralbohrer führt das zu scharfen Kanten, hoher Rundlaufgenauigkeit und sauberem Bohrbild, erfordert aber schonende Anwendung. {"@context":"https://schema.org","@graph":[{"@type":"Product","@id":"#32035-FDA","sku":"32035-FDA","mpn":"32035-FDA","name":"Spiralbohrer 3,5 mm extra lang","description":"Extra langer Spiralbohrer 3,5 mm, 135° Spitzenwinkel, blank, HSS-G, DIN 1869; Geschliffener Schaft und Tieflochspirale für tiefe Metallbohrungen in legierten und unlegierten Stählen sowie Gusswerkstoffen; Gesamtlänge 165 mm, Spirallänge 115 mm.","image":["https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741b/logo-metav-1200-1200.png","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741e/logo-metav-1200-900.png","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png"],"additionalProperty":[{"@type":"PropertyValue","name":"Bezeichnung","value":"Spiralbohrer 3,5 mm extra lang"},{"@type":"PropertyValue","name":"Marke/Hersteller","value":"MetavCUT"},{"@type":"PropertyValue","name":"Durchmesser","value":"3,5 mm"},{"@type":"PropertyValue","name":"Material","value":"HSS-G"},{"@type":"PropertyValue","name":"Ausführung","value":"extra lang"},{"@type":"PropertyValue","name":"Schaft Ausführung","value":"geschliffen"},{"@type":"PropertyValue","name":"Farbe","value":"Blank"},{"@type":"PropertyValue","name":"Norm","value":"DIN 1869"},{"@type":"PropertyValue","name":"Spitzenwinkel","value":"135°"},{"@type":"PropertyValue","name":"Gesamtlänge","value":"165 mm"},{"@type":"PropertyValue","name":"Spirallänge","value":"115 mm"},{"@type":"PropertyValue","name":"Für Bohrmaschine","value":"Handbohrmaschine"},{"@type":"PropertyValue","name":"Modellserie","value":"Standard Line"},{"@type":"PropertyValue","name":"Anwendung","value":"Bohrer für Metall"},{"@type":"PropertyValue","name":"Eigenschaften","value":"Tieflochspirale, geschliffene Geometrie, hohe Rundlaufgenauigkeit"}]},{"@type":"FAQPage","mainEntity":[{"@type":"Question","name":"Welche Materialien lassen sich mit dem Spiralbohrer von MetavCUT bearbeiten?","acceptedAnswer":{"@type":"Answer","text":"Der Spiralbohrer 3,5 mm von MetavCUT in HSS‑G‑Ausführung eignet sich zum Bohren in legierten und unlegierten Stählen, Gussstahl, Gusseisen, Temperguss sowie in Nichteisenmetallen und Hartkunststoffen."}},{"@type":"Question","name":"Ist der Spiralbohrer von MetavCUT für handgeführte Bohrmaschinen geeignet?","acceptedAnswer":{"@type":"Answer","text":"Ja, der Spiralbohrer 3,5 mm von MetavCUT ist für den Einsatz in Handbohrmaschinen im Standard‑Bereich geeignet; bei tiefen oder sehr langen Bohrungen wird eine stabile Aufspannung empfohlen, um Bruch zu vermeiden."}},{"@type":"Question","name":"Wie erhöhe ich die Standzeit des MetavCUT Spiralbohrers?","acceptedAnswer":{"@type":"Answer","text":"Um die Standzeit des Spiralbohrers 3,5 mm von MetavCUT zu erhöhen, sollten Kühlschmiermittel verwendet, moderater Vorschub angewendet und bei tiefen Löchern mehrstufig vorgebohrt werden."}},{"@type":"Question","name":"Was bedeutet „geschliffen“ beim Spiralbohrer von MetavCUT?","acceptedAnswer":{"@type":"Answer","text":"Geschliffen bedeutet beim Spiralbohrer 3,5 mm von MetavCUT, dass Geometrie und Spannuten präzise durch Schleifen gefertigt wurden; dies führt zu scharfen Kanten, hoher Rundlaufgenauigkeit und sauberem Bohrbild, erfordert aber schonende Anwendung und Kühlung."}}]},{"@type":"ItemPage","url":"https://metav-shop.de/produkt/32035-FDA","dateModified":"2026-05-04T12:00:00+01:00","author":{"@type":"Person","name":"Stephan Bayer","url":"https://www.linkedin.com/in/stephan-bayer/"},"publisher":{"@type":"Organization","name":"Metav Werkzeuge GmbH","url":"https://metav-shop.de","logo":{"@type":"ImageObject","url":"https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png","width":1200,"height":675},"address":{"@type":"PostalAddress","streetAddress":"Parkring 45","postalCode":"46446","addressLocality":"Emmerich","addressCountry":"DE"},"telephone":"+49 2822 7131930","email":"info@metav-werkzeuge.com"},"about":[{"@type":"Thing","name":"Spiralbohrer 3,5 mm extra lang"},{"@type":"Thing","name":"HSS-G geschliffen"},{"@type":"Thing","name":"DIN 1869 Tieflochspirale"}],"mentions":[{"@type":"Thing","name":"Anwendung: Bohrer für Metall"},{"@type":"Thing","name":"Einsatz in Handbohrmaschine empfohlen mit stabiler Aufspannung"},{"@type":"Thing","name":"Empfohlenes Zubehör: Kühlmittel, Zentrierbohrer"}]}]}

Twist Drill — HSS‑G Extra Long, 3.5 mm, 135° (Bright Finished, Fully Ground Shank, DIN 1869) The Twist Drill is an extra‑long HSS‑G metal drill designed for deep, precise holes in hard materials when used with a Drilling Machine. Extra‑long design for deep hole drilling HSS‑G for high performance in hard metals 135° Point Angle for stainless steel and alloys Fully ground shank for concentricity and precision DIN 1869 standard for demanding industrial use Faster penetration and lower feed force for efficient machining The Twist Drill from MetavCUT combines an HSS‑G material composition with a ground flute geometry that enables up to 40% faster drilling and requires approximately 50% less feed force compared with conventional HSS drills. This efficiency reduces operator effort and tool wear during repetitive Metalworking tasks, making it particularly suitable for workshops and maintenance operations where throughput matters. The performance advantage translates directly into shorter cycle times and more predictable production. Precise holes thanks to CNC grinding and optimised point geometry A fully ground shank and flutes produce a very sharp cutting edge and excellent run‑out behaviour, resulting in cleaner, more accurate holes in tough materials. The 135° Point Angle is optimised for harder materials such as Stainless Steel and alloyed Steels, shortening initial entry time and improving centring. For users unfamiliar with grinding terminology: “fully ground” means the flutes are shaped by CNC grinding rather than rolled, which yields higher concentricity and superior hole finish at the cost of higher brittleness under misuse. Built for deep and hard‑to‑reach drilling applications With an Overall Length of 210 mm and a Spiral Length of 145 mm, this extra‑long design is intended for deep hole drilling and access into recessed or hard‑to‑reach areas. The geometry follows DIN 1869 for deep‑hole twist drills and is frequently employed for diameters up to 20 mm and depths approaching 100 mm in many metalworking scenarios. Users should employ adequate clamping and coolant when drilling deep holes to preserve tool life and maintain hole quality. Clear suitability and targeted user groups This tool addresses the needs of professional machinists, maintenance technicians, toolroom staff and industrial workshops that require reliable metal drilling performance. The combination of HSS‑G material, sharp CNC grinding and a specialised point angle makes it a good choice for drilling Legated and Unlegated Steel, Cast Iron, Sintered Iron and certain Non‑Ferrous Metals. For hobbyists, the drill can be used in a bench or hand Drilling Machine when setup and coolant are applied correctly. For demanding deep‑hole metalworking we recommend MetavCUT’s extra‑long Twist Drill — for individual technical advice and application support contact METAV Werkzeuge via info@metav-werkzeuge.com, phone +49 2822 7131930 or WhatsApp +49 170 2837271 Designation: Twist Drill Brand: MetavCUT SKU: 33035-FDA Model Series: Standard Line Diameter: 3.5 mm Overall Length: 210 mm Spiral Length: 145 mm Point Angle: 135° Material: HSS‑G Standard: DIN 1869 Execution: Extra long Shank Finish: Fully ground Finish / Colour: Bright finished For Machine: Drilling Machine (Hand Drill) Application: Drills for Metal Packaging Unit: 10 Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the MetavCUT Twist Drill used for? The MetavCUT Twist Drill is primarily applied in the machining of high‑strength materials and when larger drill diameters are required; its form is easy to sharpen and it withstands substantial loads, which makes it suitable for demanding Metalworking tasks. Which three basic drill types exist? For general use, drill types are categorised as Metal Drill, Wood Drill and Stone/Masonry Drill; the MetavCUT Twist Drill belongs to the Metal Drill category and is optimised for metals. Why are Twist Drill tips often re‑ground? Re‑grinding the tip of a MetavCUT Twist Drill reduces the cross‑cut at the tip, lowering friction and thus the required feed force while improving centring and drilling control. Can a Metal Twist Drill be used for Wood? A Metal Drill such as the MetavCUT Twist Drill can be used in Wood, but guidance and finish are inferior compared with dedicated Wood Drills; however, Metal Drills are easier to re‑sharpen and show less self‑feeding tendency.

Spiralbohrer 3,5 mm (HSS-G) – extra lang, DIN 1869, blank, Spitzenwinkel 135° Der Spiralbohrer ist ein extra langer HSS-G Bohrer für präzise Metallbohrungen, entwickelt für tiefe Löcher und den Einsatz mit Handbohrmaschine oder stationärer Aufnahme. Spiralbohrer von MetavCUT Extra lange Bauart für tiefe Bohrungen HSS-G geschliffen für präzise Metallbohrungen DIN 1869 Tieflochspirale reduziert Spänefluss 135° Spitzenwinkel ideal für harte Werkstoffe Tiefe Bohrungen sicher erreichen dank extra langer Bauart Die extra lang ausgeführte Konstruktion bietet mit Gesamtlänge 265 mm und Spirallänge 180 mm eine deutlich größere Reichweite gegenüber Standardbohrern, sodass tiefe Bohrungen ohne Verlängerungen möglich sind. Durch die Kombination aus längerer Arbeitslänge und der HSS-G-Qualität wird der Vorschub effizienter, was Arbeitszeit spart. Der Hauptvorteil liegt in der Möglichkeit, schwer zugängliche Bereiche zu erreichen, ohne zusätzliche Adapter einzusetzen, was die Prozesskette vereinfacht und Rüstzeiten reduziert. Schnellere Schnitte und Materialverträglichkeit für anspruchsvolle Werkstoffe Mit dem geschliffenen HSS-G-Material lässt sich unter Einsatz von Kühlschmierstoff bis zu 40 % schneller bohren und es ist gleichzeitig 50 % weniger Anpresskraft erforderlich als bei herkömmlichen HSS-Werkzeugen. Der 135° Spitzenwinkel wurde gewählt, um das Anbohren in härtere Werkstoffe zu erleichtern; die Konstruktion eignet sich für legierten und unlegierten Stahl, Gussstahl, Gusseisen, Sintereisen, Temperguss, Nichteisenmetalle und Hartkunststoff bis ca. 1000 N/mm². Dadurch bietet die Ausführung sowohl Geschwindigkeit als auch eine hohe Standzeit bei geeigneter Anwendung. Präzision durch geschliffene Geometrie und Praxistipps für die Anwendung Der geschliffene Schaft und die durch Schleifen erzeugte Geometrie (oft als CNC-Schliff bezeichnet) sorgen für scharfe Schneiden und hohe Rundlaufgenauigkeit, was saubere, präzise Bohrbilder in Metall ermöglicht. Für beste Ergebnisse empfiehlt sich bei hoher Genauigkeitsanforderung das Anpunkten mit einem Zentrierbohrer, bei Handgebrauch eine stabile Spannvorrichtung und bei längeren Einsatzzeiten eine Kühlung. Die geschliffene Bauweise bringt bessere Bohrbilder, verlangt aber kontrollierte Einsatzbedingungen, da die Sprödigkeit bei unstetem Vorschub zu Bruch führen kann. Geeignete Einsatzfelder und Hinweise zur sicheren Nutzung Mit einem Durchmesser von 3,5 mm fällt der Bohrer in den Standard-Bereich und ist damit ideal für Werkstatt, Montage und allgemeine Metallbearbeitung. Die DIN 1869 Ausführung mit Tieflochspirale erlaubt das Ablängen des Späneabtrags auch bei tieferen Bohrungen, dennoch ist auf ausreichende Steifigkeit der Maschine und geeignete Kühlung zu achten. Für besonders tiefe Löcher empfiehlt sich das schrittweise Arbeiten und die Nutzung stationärer Maschinen, um die Lebensdauer des Werkzeugs zu maximieren und die Bohrqualität stabil zu halten. Empfehlung: Für kontrollierte, extra tiefe Metallbohrungen empfehlen wir den MetavCUT HSS-G Spiralbohrer der Standard Line mit 135° Spitzenwinkel und extra langer Bauart; bei technischen Fragen steht METAV Werkzeuge gern per eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 zur Verfügung Bezeichnung: Spiralbohrer Marke: MetavCUT SKU: 34035-FDA Durchmesser: 3,5 mm Spitzenwinkel: 135° Material: HSS-G Norm: DIN 1869 Ausführung: extra lang Farbe: blank Gesamtlänge: 265 mm Spirallänge: 180 mm Schaft Ausführung: geschliffen Für Bohrmaschine: Handbohrmaschine Modellserie: Standard Line Verpackungseinheit: 10 Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ Brauche ich bei Edelstahl einen speziellen Bohrer, oder reicht der Spiralbohrer von MetavCUT? Der Spiralbohrer von MetavCUT in HSS-G Ausführung mit 135° Spitzenwinkel ist für härtere Werkstoffe wie Edelstahl geeignet; bei sehr zähen Edelstählen empfiehlt sich jedoch langsame Schnittgeschwindigkeit, geeignete Kühlung und gegebenenfalls die Nutzung von Werkzeugen mit spezieller Beschichtung. Wie tief kann ich mit dem Spiralbohrer von MetavCUT sicher bohren? Dank der extra lang Bauart und der Tieflochspirale nach DIN 1869 erlaubt der Spiralbohrer von MetavCUT deutlich tiefere Bohrungen; für konstant gute Späneabfuhr und Werkzeugstandzeit sollten Maschine und Kühlung an die Bohrtiefe angepasst werden. Ist der Spiralbohrer von MetavCUT für Handbohrmaschine geeignet? Der Spiralbohrer von MetavCUT ist für den Einsatz mit Handbohrmaschine vorgesehen und eignet sich für viele Alltagsanwendungen; bei sehr tiefen oder hochgenauen Bohrungen wird jedoch eine stationäre Maschine empfohlen, um Verkantung und Bruchrisiko zu minimieren. Wie unterscheidet sich der geschliffene Schaft beim Spiralbohrer von MetavCUT von gewalzten Bohrern? Der Spiralbohrer von MetavCUT mit geschliffen Schaft weist durch CNC-Schliff schärfere Kanten und bessere Rundlaufgenauigkeit auf, was zu saubereren Bohrlöchern führt; gleichzeitig ist die Sprödigkeit höher, weshalb kontrollierte Vorschub- und Kühlbedingungen wichtig sind. Sind Sie sich nicht sicher, ob dieses Werkzeug Ihre Anforderungen erfüllt? Oder benötigen Sie ergänzende technische Daten? Kein Problem – wir stehen Ihnen gerne zur Verfügung. 📧 eMail: info@metav-werkzeuge.com ☎️ Telefon: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 {"@context":"https://schema.org","@graph":[{"@type":"Product","@id":"#34035-FDA","sku":"34035-FDA","mpn":"34035-FDA","name":"Spiralbohrer 3,5 mm (HSS-G) – extra lang","description":"Spiralbohrer 3,5 mm, HSS-G, extra lang (Gesamtlänge 265 mm, Spirallänge 180 mm), blank, Spitzenwinkel 135°, DIN 1869 Tieflochspirale; geeignet für tiefe Metallbohrungen in legiertem und unlegiertem Stahl, Gussstahl, Gusseisen, Sintereisen, Temperguss, Nichteisenmetallen und Hartkunststoff bis ca. 1000 N/mm²; geschliffener Schaft (CNC‑Schliff) für hohe Rundlaufgenauigkeit und präzise Bohrbilder; empfohlen für Handbohrmaschine und stationären Einsatz mit Kühlung.","image":["https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741b/logo-metav-1200-1200.png","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741e/logo-metav-1200-900.png","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png"],"additionalProperty":[{"@type":"PropertyValue","name":"Bezeichnung","value":"Spiralbohrer"},{"@type":"PropertyValue","name":"Marke","value":"MetavCUT"},{"@type":"PropertyValue","name":"SKU","value":"34035-FDA"},{"@type":"PropertyValue","name":"Durchmesser","value":"3,5 mm"},{"@type":"PropertyValue","name":"Spitzenwinkel","value":"135°"},{"@type":"PropertyValue","name":"Material","value":"HSS-G"},{"@type":"PropertyValue","name":"Norm","value":"DIN 1869"},{"@type":"PropertyValue","name":"Ausführung","value":"extra lang"},{"@type":"PropertyValue","name":"Farbe","value":"blank"},{"@type":"PropertyValue","name":"Gesamtlänge","value":"265 mm"},{"@type":"PropertyValue","name":"Spirallänge","value":"180 mm"},{"@type":"PropertyValue","name":"Schaft Ausführung","value":"geschliffen"},{"@type":"PropertyValue","name":"Für Bohrmaschine","value":"Handbohrmaschine"},{"@type":"PropertyValue","name":"Modellserie","value":"Standard Line"},{"@type":"PropertyValue","name":"Verpackungseinheit","value":"10"},{"@type":"PropertyValue","name":"Hersteller","value":"Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com"}],"author":{"@type":"Person","name":"Stephan Bayer","url":"https://www.linkedin.com/in/stephan-bayer/"},"publisher":{"@type":"Organization","name":"Metav Werkzeuge GmbH","url":"https://metav-shop.de","logo":{"@type":"ImageObject","url":"https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png","width":1200,"height":675},"address":{"@type":"PostalAddress","streetAddress":"Parkring 45","postalCode":"46446","addressLocality":"Emmerich","addressCountry":"DE"},"telephone":"+49 2822 7131930","email":"info@metav-werkzeuge.com"},"about":[{"@type":"Thing","name":"Bohrer für Metall"},{"@type":"Thing","name":"Tieflochspirale nach DIN 1869"},{"@type":"Thing","name":"HSS-G geschliffen"}]},{"@type":"FAQPage","mainEntity":[{"@type":"Question","name":"Brauche ich bei Edelstahl einen speziellen Bohrer, oder reicht der Spiralbohrer von MetavCUT?","acceptedAnswer":{"@type":"Answer","text":"Der Spiralbohrer 3,5 mm (HSS-G) von MetavCUT mit 135° Spitzenwinkel eignet sich für härtere Werkstoffe wie Edelstahl; bei zähen Edelstählen werden langsame Schnittgeschwindigkeit, geeignete Kühlung und gegebenenfalls beschichtete Werkzeuge empfohlen."}},{"@type":"Question","name":"Wie tief kann ich mit dem Spiralbohrer von MetavCUT sicher bohren?","acceptedAnswer":{"@type":"Answer","text":"Der Spiralbohrer 3,5 mm von MetavCUT in extra langer Ausführung mit DIN 1869 Tieflochspirale erlaubt deutlich tiefere Bohrungen; für konstante Späneabfuhr und Werkzeugstandzeit sollten Maschine und Kühlung an die Bohrtiefe angepasst werden."}},{"@type":"Question","name":"Ist der Spiralbohrer von MetavCUT für Handbohrmaschine geeignet?","acceptedAnswer":{"@type":"Answer","text":"Der Spiralbohrer 3,5 mm (HSS-G) von MetavCUT ist für den Einsatz mit Handbohrmaschine vorgesehen und eignet sich für viele Alltagsanwendungen; bei sehr tiefen oder hochgenauen Bohrungen wird eine stationäre Maschine empfohlen."}},{"@type":"Question","name":"Wie unterscheidet sich der geschliffene Schaft beim Spiralbohrer von MetavCUT von gewalzten Bohrern?","acceptedAnswer":{"@type":"Answer","text":"Der Spiralbohrer 3,5 mm von MetavCUT mit geschliffenem Schaft (CNC‑Schliff) bietet schärfere Schneiden und bessere Rundlaufgenauigkeit für saubere Bohrbilder; im Vergleich zu gewalzten Bohrern ist die Sprödigkeit höher, weshalb kontrollierte Vorschub‑ und Kühlbedingungen wichtig sind."}}]},{"@type":"ItemPage","url":"https://metav-shop.de/produkt/34035-FDA","dateModified":"2026-05-04T12:00:00+01:00","author":{"@type":"Person","name":"Stephan Bayer","url":"https://www.linkedin.com/in/stephan-bayer/"},"publisher":{"@type":"Organization","name":"Metav Werkzeuge GmbH","url":"https://metav-shop.de","logo":{"@type":"ImageObject","url":"https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png","width":1200,"height":675},"address":{"@type":"PostalAddress","streetAddress":"Parkring 45","postalCode":"46446","addressLocality":"Emmerich","addressCountry":"DE"},"telephone":"+49 2822 7131930","email":"info@metav-werkzeuge.com"},"about":[{"@type":"Thing","name":"Spiralbohrer Standard Line"},{"@type":"Thing","name":"Extra lange Bauart für tiefe Bohrungen"}],"mentions":[{"@type":"Thing","name":"DIN 1869 Tieflochspirale"},{"@type":"Thing","name":"CNC‑Schliff geschliffener Schaft"},{"@type":"Thing","name":"135° Spitzenwinkel"}]}]}

Twist Drill Type N — extra short, Ø 3.5 mm, 135°, bright finished, HSS‑G, DIN 1897 The Twist Drill Type N is an extra short HSS‑G drill bit designed for precision metalworking with hand Drilling Machines in confined spaces. Extra short HSS‑G design for high stability 135° point angle for hard materials Cylindrical shank for universal chuck fit Ideal for hand and angle Drills in tight spaces Conforms to DIN 1897 for consistent quality Faster, more controlled drilling for demanding metalwork The extra short geometry reduces flex and breakage risk when working with metal, delivering a more stable cutting action compared with standard lengths. The ground HSS‑G cutting edges enable up to a 40% faster drilling speed and require about 50% less axial force, which translates into reduced operator fatigue and more reliable hole quality. This makes the bit particularly suitable where precision and repeatability are required. Robust tip and geometry for hard materials A 135° point angle combined with the Type N normal spiral provides better centring and reduced walking in harder steels and stainless alloys. The blunter tip shortens the initial penetration time and distributes cutting loads, so drilling into tougher materials like tempered or alloyed steels becomes more efficient. This geometry helps to extend tool life while maintaining consistent hole geometry. Universal fit and practical handling in confined spaces The drill features a cylindrical shank that fits standard three‑jaw chucks, offering broad compatibility with typical hand and angle Drilling Machines. With a total length of 52 mm and a spiral length of 20 mm, the compact form factor is ideal for shallow holes, sheet metal, profiles and situations where access is limited. The bright finished surface aids chip evacuation and makes bit handling straightforward on the bench. Application focus and recommended uses Manufactured to DIN 1897 from HSS‑G, this Twist Drill is designed for drilling Alloyed and Unalloyed Steel, Cast Steel, Cast Iron, Sintered Iron and Non‑Ferrous Metals, as well as Hard Plastics. The extra short design is particularly advantageous when working with thin‑walled components or when the setup cannot accommodate longer tools. Users seeking a robust, easy‑to‑control solution for metal drilling will find reliable performance with this geometry and material combination. We recommend the MetavCUT Type N extra short Twist Drill for precision metalworking; for product advice or technical data contact METAV Werkzeuge — Email: info@metav-werkzeuge.com — Phone: +49 2822 7131930 — WhatsApp: +49 170 2837271 Technical Information Designation: Twist Drill Brand: MetavCUT SKU: 56035‑FDA Diameter: 3.5 mm Point angle: 135° Type: Type N Material: HSS‑G Execution: extra short Colour: bright finished Shank execution: cylindrical Spiral length: 20 mm Total length: 52 mm Norm: DIN 1897 Model series: Standard Line Application: Drills for metal For drilling machine: Drilling Machine Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the MetavCUT Twist Drill Type N mainly used for? The MetavCUT Twist Drill Type N is primarily used for drilling in high‑strength materials and larger diameters; its extra short design is well suited to metalworking tasks where stability and reduced breakage are important. Can the MetavCUT Twist Drill Type N be used with a hand Drilling Machine? Yes, the MetavCUT Twist Drill Type N with a cylindrical shank is intended for use in common hand Drilling Machines and angle drills, offering universal chuck compatibility for workshop and on‑site applications. What are Twist Drills used for? Twist Drills are mainly applied to the machining of high‑strength materials and larger drill diameters; their form is easy to re‑grind and they withstand considerable loads. Which three drill types are there? The three main drill types are metal drills, wood drills and stone/concrete drills. Why are Twist Drills sharpened? Sharpening reduces the cross‑cut at the tip of the Twist Drill, which lowers friction and therefore reduces the required feed forces while improving centring in the workpiece. Can a metal drill be used to drill wood? A metal drill can be used in wood, but guidance and finish are inferior compared with dedicated wood drills; metal drills are easier to re‑grind and have less self‑feeding action.