High-precision drills for reliable, high-throughput metalworking
Drills provide the fundamental rotating cutting solution for producing accurate cylindrical holes in materials such as structural steel, high-alloy stainless steel, cast iron, non-ferrous metals and engineering plastics, delivering consistent hole quality and extended tool life in CNC machining and turning centres. This category covers everything from classic twist drill made from high-speed steel for general machining to solid carbide drill optimised for high cutting speeds and long run times, offering advanced coatings and internal coolant options for improved heat management. By using optimised point geometries and split points the tools reduce thrust, prevent walking at the start of the cut and ensure superior surface finish, which benefits sectors from general mechanical engineering to automotive component manufacture.
2mm Centre Drill DIN 333 Form A 60° Countersink Angle HSS - TECWERK
Take advantage of HSS quality and DIN 333 geometry for repeatable centre holes, combined with a defined 60° countersink for precise seating and improved runout control; order directly via Metav Werkzeuge or consult the Metav team for application advice. Zentrierbohrer DIN 333 Form A D.2mm HSS li. — Centre drill, 60° tip, HSS Zentrierbohrer DIN 333 Form A D.2mm HSS li. is a high-speed steel centre drill designed to produce accurate centre holes to DIN 332 standards for general workshop use HSS, DIN 333 Form A 60° centre/countersink angle Creates centre holes to DIN 332 Efficient feed: 0.02 mm/rev in steel Accurate centre geometry for reliable machining starts The centre drill combines the standardised DIN 333 Form A geometry with a defined 60° tip to produce precise centring points that stabilise subsequent drilling or turning operations. The design eliminates the need for a protective countersink when producing centring holes to DIN 332, so the resulting seat and axis alignment are consistent and repeatable. This reduces setup time and helps maintain concentricity during follow-up machining, which is especially valuable when accuracy is required across multiple identical components. Durable high-speed steel for everyday workshop use Manufactured from HSS, the tool delivers the toughness and heat resistance expected for general-purpose centring. The combination of material and geometry is suited to standard production and maintenance tasks where resilience and predictable wear behaviour matter. A recommended feed of 0.02 mm per revolution in steel up to 800 N gives a practical starting point for process design, balancing tool life with cycle time in common ferrous applications. The small 2 mm diameter provides a compact, rigid pilot that is easy to position for fine centring work. Improves process reliability and downstream accuracy Using a purpose-made centre drill reduces radial runout before primary drilling or live-centre turning, which can lower scrap rates and rework. The standardised tip angle ensures that mating centres, lathe centres and drill guides make intimate contact, improving torque transmission and reducing chatter. For batch processes or repair work, the consistent seat geometry helps achieve repeatable results across components, supporting quality assurance protocols and minimising measurement variance. Practical handling and workshop integration The tool is suitable for routine workshop workflows and integrates straightforwardly into common chucks and tailstock arrangements. Its general-purpose specification makes it adaptable across a range of machines without elaborate tooling changes. For complicated assemblies or unusual material conditions, consult the Metav technical team to confirm feed strategy and clamping recommendations; documented feed guidance assists in selecting the correct speeds and feeds for stable cutting and predictable tool life. For precise centring with proven DIN-compliant geometry, request the TECWERK centre drill through Metav Werkzeuge or contact Metav Werkzeuge for tailored advice at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 2000861571NW Manufacturer: TECWERK Packaging unit: 5 Facts Material: HSS Standard: DIN 333 Form A Tip angle: 60° Diameter: 2 mm Feed in steel up to 800 N: 0.02 mm/rev Special features For producing centre holes to DIN 332 without protective countersink General-purpose centring application Defined tip geometry for improved runout control FAQ What size is the centre drill and for which standard is it intended? The centre drill is a 2 mm diameter tool specified to DIN 333 Form A and intended to produce centre holes in accordance with DIN 332. Which material is the tool made from and what are the benefits? The tool is made from HSS; this provides toughness and heat resistance for reliable general-purpose centring in workshop environments. What feed should be used when centre-drilling steel? A feed of 0.02 mm per revolution is indicated for steel up to 800 N, offering a practical compromise between tool life and productivity for the TECWERK centre drill. Can this centre drill be used without a protective countersink? Yes; the geometry is designed to produce centre holes to DIN 332 without an additional protective countersink, which simplifies the machining sequence. What advantages does a standardised 60° tip give in production? A 60° tip ensures consistent seat geometry for subsequent drilling or turning, reducing runout and improving the repeatability of downstream processes. TECWERK: Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
2mm Centre Drill DIN 333 Form A 60° For High‑Strength Steels And Cast Irons Solid Carbide 0.09mm/rev - TECWERK
Take advantage of solid carbide construction, a 60° countersink geometry and precise feed control for repeatable centre holes in demanding materials; order the centre drill directly via Metav Werkzeuge or ask the consultants for application advice. Centre Drill DIN 333 Form A, 2 mm – Solid Carbide, Right-hand Cutting (TECWERK) A 2 mm centre drill DIN 333 Form A designed for producing precise centre holes and light countersinks across a broad range of metals and duroplasts Solid carbide body for high rigidity and wear resistance DIN 333 Form A geometry for standard-compliant centre holes Right-hand cutting with 60° countersink angle Suitable for high-strength steels and non-ferrous metals High-performance results ensured by solid carbide design The solid carbide construction delivers consistent rigidity and thermal stability, which reduces chatter and tool deflection during centre-drilling operations. By combining a compact diameter with a DIN 333 Form A geometry, this tool produces accurate locating holes and light countersinks in one operation. The 60° countersink profile conforms to established standards and ensures precise seating for live centres and centre punches. For process planners, the result is improved runout control and repeatability when preparing workpieces for subsequent turning or drilling. Efficient machining of demanding materials with defined feed parameters Designed for use in a wide material spectrum — from high-strength steels and steel castings to light metals and fibre-reinforced plastics — the tool is optimised for controlled chip formation and stable cutting performance. The specified feed of 0.09 mm/rev in steel up to 800 N gives a practical reference for setting spindle and feed values; this allows machinists to balance cycle time and tool life reliably. Where higher static loads are expected, the carbide body and right-hand cutting geometry maintain edge integrity, so centring operations remain stable even under repetitive use. Practical integration and production benefits The centred geometry for producing holes according to DIN 332 (without protective countersink) simplifies setup and reduces the need for secondary operations. The right-hand cutting orientation is compatible with standard toolholders and conventional lathe or mill spindle directions, facilitating seamless integration into existing processes. By reducing handling steps and producing accurate seatings in one pass, the tool contributes directly to shorter cycle times and fewer reworks, supporting leaner production workflows and lower total cost of ownership for precision applications. For reliable centre drilling in hard and mixed materials, contact Metav Werkzeuge for tailored advice and ordering: eMail info@metav-werkzeuge.com or call +49 2822 7131930 — Metav Werkzeuge offers application support and fast supply from Emmerich. Technical data Article number: 2000861991NW SKU: 2000861991NW Manufacturer: TECWERK Facts Diameter: 2 mm Countersink angle: 60° Feed in steel up to 800 N: 0.09 mm/rev Standard: DIN 333 Form A Special features Material: solid carbide Application: centre holes to DIN 332 (without protective countersink) Cutting direction: right-hand cutting Suitable for: high-strength steels; steel castings; grey and hardened cast iron; manganese-hardened steel; CrNi steels; light and non-ferrous metals; fibre-reinforced plastics; other duroplasts FAQ What materials can be machined with this centre drill? The centre drill is suitable for high-strength steels, steel castings, grey cast iron, hardened cast iron, manganese-hardened steel, CrNi steels, light and non-ferrous metals, and various fibre-reinforced plastics and duroplasts. Is the diameter and geometry standard-compliant? Yes, the tool follows DIN 333 Form A and is intended for producing centre holes in accordance with DIN 332 without a protective countersink. What feed should be used for drilling in steel? A reference feed of 0.09 mm/rev is specified for steel at static loads up to 800 N; this provides a guideline for achieving reliable chip formation and tool life. Does the centre drill come with a coating? No specific coating is stated for this item; the tool is supplied as a solid carbide centre drill with the described geometry. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
2mm Centre Drill DIN 333 Form A 60° HSS, Feed 0.02mm/rev - TECWERK
Take advantage of the precise centring, HSS durability and the 60° countersink geometry for consistent pilot holes and reliable subsequent drilling. Order directly via Metav Werkzeuge or consult our specialists for application-specific advice. Centre drill DIN 333 Form A, 2.0 mm – HSS, 60° countersink – TECWERK A Centre drill DIN 333 Form A, 2.0 mm HSS designed for precise centring and the manufacture of centre holes to DIN 332 in general workshop and production environments HSS centre drill, DIN 333 Form A 60° countersink angle for accurate centring For centre holes to DIN 332 without spotfacing Feed 0.02 mm/rev in steel up to 800 N High-precision centring for repeatable drilling results The small-diameter centre drill combines the hardened cutting geometry of HSS with the standardised form of DIN 333, delivering consistent pilot holes that improve concentricity and reduce run-out for subsequent operations. The 60° countersink angle ensures a correct seat for lathe centres and tailstock points, reducing burr formation and the need for secondary alignment. This predictable starting point minimises rejected workpieces and raises overall process reliability. Optimised cutting performance and material compatibility Designed for general workshop use, the tool offers a controlled feed characteristic: 0.02 mm/rev in steels up to 800 N, which helps to avoid chatter and ensures a clean entry even with small diameters. The right-hand cutting design provides conventional rotation compatibility with standard drill chucks and tailstocks. Where operators require a stable starting bore for turning or drilling, this tool delivers a balance of cutting edge life and reproducible results without complicated machining parameters. Practical handling that speeds up set-up and inspection The small footprint of the 2.0 mm centring tool simplifies clamping and indexation, reducing set-up time on both manual and CNC equipment. Packaged in a compact unit, the set is suited to inventory strategies that prioritise fast replacement. The standardised geometry means inspection and acceptance can be based on familiar DIN references, simplifying quality control and documentation for production records and audits. Proven conformity and dependable workshop performance By following recognised standards and applying robust HSS metallurgy, this centring drill supports a predictable production flow with fewer interruptions. The standard form and angle reduce operator decision-making at the machine, helping to maintain cycle time and throughput. For operations that require repeatable accuracy and compatibility with existing tooling, the combination of DIN conformity and practical cutting data provides a solid, low-risk choice from a recognised cutting-tool supplier. Consult Metav Werkzeuge for tailored advice on integrating this TECWERK HSS centre drill into existing workflows and for recommendations on batch supply and usage practices. Technical data Article number: 2000861805NW Designation: Centre drill DIN 333 Form A, 2.0 mm, HSS, right-hand Manufacturer: TECWERK Packaging unit: 5 Facts Diameter: 2.0 mm Countersink angle: 60° Feed in steel up to 800 N: 0.02 mm/rev Standard: DIN 333 Packaging unit: 5 pieces Special features Material: HSS Form: A (DIN 333) Intended use: Manufacture of centre holes to DIN 332 without spotfacing Cutting direction: Right-hand FAQ What materials can this centre drill be used on? The centre drill is specified for general use; its cutting data highlights performance in steels up to 800 N, and it is suitable for typical workshop materials where an HSS tool is appropriate. What does Form A indicate for this tool? Form A refers to the standardised geometry under DIN 333; the shape and 60° countersink angle ensure correct seating for centres and consistent pilot-hole profiles. How important is the 0.02 mm/rev feed value? The 0.02 mm/rev feed in steel up to 800 N gives guidance for stable entry and minimal burr formation; it helps maintain concentricity when using the centre drill DIN 333 Form A, 2.0 mm HSS. Is this tool suitable for use in CNC and manual machines? Yes, the right-hand design and standardised form make the tool compatible with both manual tailstocks and CNC spindles that accept centre drills of this diameter. How is quality and conformity documented for this product? The tool's compliance with DIN 333 and its defined cutting data support traceable acceptance criteria and simplify integration into existing inspection routines. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
2mm Centre Drill DIN 333 Form A HSS TiN-Coated 60° Tip, Right-Hand - TECWERK
Take advantage of a compact cutting solution that combines HSS strength with a TiN coating and a true DIN 333 Form A geometry for fast, repeatable centring; order via Metav Werkzeuge or consult our team for application advice. TECWERK centre drill DIN 333 Form A Ø 2.0 mm (HSS, TiN) TECWERK centre drill DIN 333 Form A Ø 2.0 mm (HSS, TiN) is a precision centre drill designed for producing 60° centring holes to DIN standards in general workshop and industrial applications HSS with TiN coating DIN 333 Form A geometry 60° centring tip Feed 0.02 mm/rev in steel Precise centring for reliable downstream machining The TECWERK centre drill DIN 333 Form A Ø 2.0 mm delivers a defined 60° seat that simplifies subsequent turning or drilling operations. The combination of HSS and TiN coating maintains a sharp tip for longer, reducing the chance of misaligned starts and scrapped parts. Conformity to DIN 333 ensures interchangeability with industry-standard toolholders and fixtures, which helps maintain process stability and reduces setup time on repeated production runs. Consistent cutting performance and extended tool life A TiN coating lowers friction and improves heat resistance, extending service life compared with uncoated high-speed steel. The specified feed of 0.02 mm/rev in steel up to 800 N gives a practical reference for setting speeds and feeds in mixed-shop environments, so technicians achieve consistent holes without overloading the drill. The right-hand cutting geometry supports standard lathe and drilling-mill rotations, making the tool straightforward to align within existing manufacturing processes. Time-saving standard compliance and process benefits Using a centring tool that produces holes to the DIN standard eliminates extra pilot-countersinking steps: the geometry is intended for centre holes according to DIN 332 without a separate pilot countersink. That direct approach reduces cycle time and minimises tool changes, which contributes to leaner workflows and fewer handling errors. For production planners, the clear specification aids process documentation and quality assurance. Practical use cases and workshop compatibility Suitable for general workshop and industrial applications, this centre drill is best deployed where reliable starting points are required prior to turning or deep drilling. The tool is compatible with common collet and chuck systems; maintenance is limited to periodic inspection and regrinding when wear becomes measurable. For bespoke setups or unfamiliar materials, specialist advice can clarify whether alternative grades or diameters are preferable. Choose the TECWERK HSS centre drill with TiN coating for dependable centring performance and contact Metav Werkzeuge for order placement or technical consultation at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 2000861589NW Designation: Zentrierbohrer DIN 333 Form A D.2mm HSS TiN re.TECWERK Manufacturer: TECWERK Packaging unit: 5 UID: 2000861589NW Core data Diameter: 2.0 mm Tip angle: 60° Feed in steel up to 800 N: 0.02 mm/rev Form: A (DIN 333) Special features Material: high-speed steel (HSS) Coating: TiN coating Right-hand cutting For producing centre holes to DIN 332 without pilot countersink Intended for general workshop use and standard toolholders FAQ What material is the drill made from and how does that affect use? The tool is manufactured from high-speed steel (HSS); this gives good toughness for centring operations and, with the TiN coating, improved wear resistance and reduced friction during use. Is the tip angle standardised for subsequent operations? Yes — the 60° tip complies with DIN specifications for centring seats, enabling reliable alignment for turning or drilling that follows. Can this centre drill be used directly for hard steels? The specified feed value refers to steels up to 800 N; for hardened materials or specialised alloys, consult machining data or Metav Werkzeuge for alternative grades and recommendations. Does the drill require a pilot countersink before use? No — the geometry is intended to produce centring holes according to DIN 332 without a separate pilot countersink, reducing setup steps. How is the tool best maintained to ensure repeatable results? Inspect the tip regularly for wear and regrind when necessary; the TiN coating helps extend service life but does not eliminate the need for routine checks and correct feed/speed settings. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
2mm Centre Drill DIN 333 Form A HSS-Co 60° Countersink, Right-Hand - TECWERK
Take advantage of precise centring from a DIN 333 geometry combined with the wear resistance of HSS‑Co for dependable centre holes in hard and stainless steels; order the TECWERK centre drill directly via Metav Werkzeuge or consult our specialists for application advice. TECWERK centre drill DIN 333 Form A, Ø 2 mm — HSS‑Co, 60° countersink A TECWERK centre drill DIN 333 Form A Ø 2 mm designed to produce standard centre holes for follow‑up drilling in high‑strength and stainless steels. DIN 333 Form A geometry for accurate centring HSS‑Co construction for durability in tough materials 60° countersink angle for standard centre holes Right‑hand cutting, suitable for high‑strength steels Reduced runout for consistent follow-up drilling The DIN 333 Form A geometry of this centre drill ensures a precise centre hole that stabilises subsequent machining operations. By creating a consistent seat for a twist drill, the risk of wobble and lateral offset is minimised, which improves hole accuracy and tool life. The 60° countersink profile matches common standards, allowing machines and fixtures to repeatably position components without additional rework. This precision leads to fewer rejects and a smoother workflow in production environments. Wear resistance and performance on demanding materials Constructed from HSS‑Co (cobalt high‑speed steel), the tool is optimised for cutting into high‑strength steels and CrNi (stainless, acid‑ and heat‑resistant) alloys. Cobalt content increases red‑hardness and abrasion resistance, so the centre drill maintains geometry under elevated contact temperatures and abrasive workpiece surfaces. For workshops facing mixed batches of harder steels, this material choice reduces downtime caused by premature tool wear and contributes to reproducible hole quality across production runs. Practical application and machining parameters The tool is configured for right‑hand cutting and is intended to form centre holes to the DIN 332 specification without a protective countersink, enabling direct centring where permitted by process design. For steels up to 800 N/mm² a recommended feed is 0.02 mm/rev, which balances cutting forces and surface quality. Use the centre hole to guide a subsequent twist drill for best results; correct centring reduces vibration and extends the service life of both the drill and the workpiece fixture. The straightforward geometry makes the tool easy to integrate into standard machining sequences. For reliable centring in hard and stainless steels, contact Metav Werkzeuge to discuss TECWERK centre drills and receive tailored advice on integration and supply — eMail: info@metav-werkzeuge.com · Tel: +49 2822 7131930 Technical data Article number: 2000861580NW Description: Centre drill DIN 333 Form A, Ø 2 mm, HSS‑Co, right‑hand Manufacturer: TECWERK UID: 2000861580NW Core technical data Diameter: Ø 2 mm Countersink angle: 60° Feed in steel up to 800 N/mm²: 0.02 mm/rev Packaging unit: 5 Special features HSS‑Co material DIN 333 Form A geometry Right‑hand cutting Produces centre holes per DIN 332 without protective countersink Suitable for materials >800 N/mm² and CrNi (stainless, acid‑ and heat‑resistant) steels FAQ What materials can the centre drill process reliably? The TECWERK centre drill is made of HSS‑Co and is suitable for materials with strength above 800 N/mm², including CrNi stainless and heat‑resistant steels as specified in the technical description. Is this tool compatible with standard twist drills for pilot guidance? Yes, the centre hole produced by this DIN 333 Form A tool is intended to guide a subsequent twist drill, improving concentricity and reducing runout for the drilling operation. What cutting direction and geometry does the tool have? The tool is right‑hand cutting with a 60° countersink angle, matching commonly used centre hole standards and enabling predictable seating for follow‑up machining. What feed should be used for steel up to 800 N/mm²? The recommended feed for steel up to 800 N/mm² is 0.02 mm/rev, which offers a balance between cutting load and hole quality for the specified materials. Which SKU identifies this centre drill for ordering? This item is listed under SKU 2000861580NW and described as a centre drill DIN 333 Form A, Ø 2 mm, in HSS‑Co by TECWERK. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund
2mm Centre Drill DIN 333 Form A Oversized Length 60° Countersink Angle HSS-Co, Short-Run Steel Feed 0.02mm/rev - TECWERK
High-precision centre holes result from the combination of HSS‑Co cutting material, DIN 333 Form A geometry and an extra‑long design for deeper reach; this configuration delivers consistent centring in steel with a recommended feed of 0.02 mm/rev. Order the centre drill directly via Metav Werkzeuge or contact the Metav consultants for tailored application advice. TECWERK CENTRE DRILL DIN 333 Form A, 2 mm (HSS‑Co, extra‑long, right‑hand) A TECWERK CENTRE DRILL DIN 333 Form A, 2 mm for producing precise centre holes to DIN 332, suited to general workshop and industrial applications HSS‑Co for enhanced heat resistance DIN 333 Form A for standardised centring Extra‑long shank for deep reach 60° countersink angle for accurate centre holes Precise centring that meets industry standards The DIN 333 Form A geometry ensures reliable production of centre holes that conform to DIN 332 without the need for a protective countersink. The defined 60° countersink angle provides a standard bearing surface for centres and lathe centres, reducing runout during subsequent machining. Conformance to these recognised standards simplifies process planning and quality control in production environments, making the tool predictable and easy to integrate into existing workflows. Robust cobalt high‑speed construction for steady productivity Constructed from HSS‑Co (cobalt high‑speed steel), the drill offers improved heat resistance and wear performance compared with standard high‑speed grades. The material choice supports higher cutting temperatures and extends tool life under continuous centre‑drilling tasks. With a specified feed in steel up to 800 N of 0.02 mm/rev, the tool delivers repeatable penetration and reliable chip formation; this translates into fewer reworks and steadier cycle times on both manual and CNC machines. Extra reach and stable cutting for versatile workshop use The extra‑long configuration increases working reach for deeper or awkward setups while the right‑hand cutting direction provides conventional chip flow and compatibility with standard drilling setups. The elongated design balances accessibility with axial stability to maintain precision at depth; for applications requiring consistent centre preparation before turning or drilling, this geometry reduces setup time and improves alignment. The combination of length, material and standardised geometry suits general workshop and industrial uses where repeatability matters. For reliable centring with TECWERK's extra‑long HSS‑Co centre drill, contact Metav Werkzeuge for product selection and supply direct from Emmerich. Technical data Article number: 2000861978NW SKU: 2000861978NW Label: Zentrierbohrer DIN 333 Form A D.2mm HSS‑Co re.ü.-lang TECWERK Facts Diameter: 2 mm Countersink angle: 60° Feed in steel up to 800 N: 0.02 mm/rev Length: extra‑long Special features Material: HSS‑Co (cobalt high‑speed steel) Standard: DIN 333 Form A Cutting direction: right‑hand Application: producing centre holes to DIN 332 without protective countersink FAQ What standard does this centre drill comply with? The centre drill follows DIN 333 Form A geometry and is designed to produce centre holes to DIN 332, ensuring compatibility with standard centre‑drilling and turning operations. Which material is recommended for use with this drill? The tool is made from HSS‑Co and is specified for general workshop use; the documented feed of 0.02 mm/rev applies to steel up to 800 N, supporting consistent performance in common ferrous alloys. What advantage does the extra‑long design provide? The extra‑long shank provides extended reach for deeper setups or awkward fixturing while maintaining axial stability for precise centring operations. Is this a right‑hand or left‑hand cutting tool? This centre drill is right‑hand cutting, compatible with standard drilling directions and conventional toolholders. How is chip control and alignment aided by the geometry? The defined 60° countersink angle creates a reliable seating for centres and improves chip evacuation and centring repeatability during subsequent machining steps. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund
2mm Centre Drill DIN 333 Form B With Countersink 60/120° HSS, Right-Hand - TECWERK
Take advantage of HSS construction and the integrated protective countersink to ensure precise, repeatable centring operations; the right‑hand cutting geometry and specified feed for steel (0.02 mm/rev at up to 800 N) deliver consistent performance in routine machining. Order the TECWERK centre drill directly via Metav Werkzeuge or request detailed technical advice if required. TECWERK centre drill DIN 333 Form B D.2 mm — HSS with protective countersink The TECWERK centre drill DIN 333 Form B D.2 mm is a precision centring tool designed for preparing secure locating points in turning and milling operations, featuring a protective countersink and right‑hand cutting geometry. HSS, DIN 333 Form B centre drill Protective countersink 60/120° Right‑hand cutting for stable machining Feed in steel up to 800 N: 0.02 mm/rev Precision centring for reliable setup and concentricity A solid HSS construction combined with the DIN 333 Form B geometry provides a robust basis for exact centre holes. The integrated protective countersink reduces the risk of tool walking at the start of the cut and protects the primary cutting edges, which helps to maintain concentricity between subsequent operations. In practical terms, this means fewer rejected parts and reduced time spent correcting misaligned setups. The protective countersink also simplifies the transition from pilot to full centre, so centring is faster and more predictable. Predictable cutting data and material performance The tool is specified with a dual countersink angle of 60/120° and a recommended feed in steel up to 800 N of 0.02 mm/rev, which enables controlled chip formation and consistent entry into the workpiece. Right‑hand cutting geometry contributes to smooth evacuation of chips and steady axial forces, particularly on lathes and smaller milling machines. These measurable parameters allow process planners to reproduce results across batches and to calculate cycle times with confidence — a clear productivity advantage for serial work and mixed production runs. Workshop durability and standards compliance Designed for general use and conformity with recognised centre‑drilling standards, the centring tool is suitable for routine workshop tasks where repeatability matters. The HSS material offers a favourable balance of toughness and wear resistance for common steel applications, while the protective countersink reduces edge chipping during initial engagement. Packaged for convenience in a pack of 5, the drills integrate easily into tool cabinets and storage systems, making inventory management straightforward for small and medium workshops. Compliance with DIN specifications supports quality assurance and simplifies procurement. For precision centring with proven geometry, choose TECWERK HSS centre drills and contact Metav Werkzeuge for product availability or specific technical clarification at info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical data Article number: 2000861631NW Designation: TECWERK centre drill DIN 333 Form B D.2 mm Brand: TECWERK Pack unit: 5 Core data Diameter: 2 mm Countersink angle: 60/120° Feed in steel up to 800 N: 0.02 mm/rev Geometry: DIN 333 Form B Cutting direction: right‑hand Features Material: HSS With protective countersink For producing centre holes to DIN 332 Sheet 1 Form B General workshop use FAQ What applications suit this centre drill best? The TECWERK centre drill DIN 333 Form B D.2 mm is intended for creating precise centre holes on lathes and milling machines, suitable for general steel work where standard centring to DIN 332 is required. What does the dual countersink angle mean in practice? A 60/120° countersink provides flexibility for different chamfer depths and seating conditions; the TECWERK centre drill’s design helps form a reliable seat for live or dead centres while protecting the primary cutting edges. Is the feed rate critical for performance? Yes — the specified feed in steel up to 800 N of 0.02 mm/rev supports consistent chip formation and entry behaviour; following this guideline for the TECWERK tool helps ensure repeatable results. How many drills are supplied per pack? The product is supplied in a pack of 5, which simplifies small‑batch replenishment and workshop stocking for routine centring tasks. Does this drill conform to recognised standards? The centring drill is produced to match DIN 333 Form B geometry and is suitable for producing centre holes according to DIN 332 Sheet 1 Form B. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
2mm Centre Drill DIN 333 Form R 60° HSS Right-Hand - TECWERK
Take advantage of precise centring, robust HSS construction and a standard 60° countersink angle for repeatable centre holes; order directly via Metav Werkzeuge or consult the specialists for technical matching. TECWERK 2 mm HSS centre drill, DIN 333 Form R — 60° countersink A TECWERK 2 mm HSS centre drill (DIN 333, Form R) designed for reliable preparation of centre holes in general metalworking and workshop applications HSS construction for long tool life DIN 333 Form R compliance 60° countersink angle for standard centres 0.02 mm/rev feed in steel up to 800 N Reliable, repeatable centring for production workflows The centre drill delivers consistently accurate centre holes, reducing setup time and improving repeatability in subsequent turning or drilling operations. Manufactured to DIN 333 and intended for centre holes to DIN 332 Sheet 1 Form R, the geometry with a 60° countersink ensures correct seating for live centres and dead centres. The compact 2 mm point supports precision alignment of small-diameter workpieces, which is particularly valuable where concentricity influences final tolerances. This leads to measurable productivity gains in medium- to high-volume shop work. Robust high-speed steel design for general use Made from HSS, the tool offers a favourable balance of toughness and wear resistance for a wide range of materials encountered in workshops. The right-hand cutting geometry provides conventional chip formation and predictable engagement. This combination yields extended service life under normal workshop feeds and reduces the frequency of tool changes, supporting continuous operation. The design is intended for general-purpose use rather than specialised high-speed carbide applications, giving dependable performance where flexibility and cost-effectiveness are required. Clear machining data for process planning and integration Process planning benefits from explicit machining data: tool diameter 2 mm, countersink angle 60° and recommended feed 0.02 mm/rev in steel up to 800 N. The specified feed rate allows integration into standard drilling or centre-drilling cycles without extensive trial runs, and the compliance with recognised DIN standards simplifies tooling lists and quality documentation. The Form R profile (with radius) produces the required seat geometry without a protective pre-countersink, streamlining operations that follow centre drilling. For dependable centring with the TECWERK 2 mm HSS centre drill, contact Metav Werkzeuge in Emmerich for stock information and technical advice at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 2000861951NW Description: TECWERK centre drill DIN 333 Form R, D 2 mm, HSS, right-hand cutting Brand: TECWERK Packaging unit: 5 Facts Diameter: 2 mm Countersink angle: 60° Feed in steel up to 800 N: 0.02 mm/rev Packaging unit: 5 Special features Material: HSS (high-speed steel) Standard: DIN 333, Form R Cutting direction: right-hand cutting Application: for centre holes to DIN 332 Sheet 1 Form R with radius, without protective countersink Intended use: general workshop and industrial metalworking FAQ What diameter and geometry does this centre drill have? The TECWERK centre drill is specified as 2 mm diameter with a Form R geometry and a 60° countersink angle, suitable for standard centre-hole preparation. Which material is recommended for use with this centre drill? The centre drill is made from HSS and is intended for general machining in steels and comparable workshop materials; the feed guidance is 0.02 mm/rev in steel up to 800 N. Is this centre drill compliant with any industry standards? Yes, the tool is manufactured to DIN 333 and is designed to produce centre holes conforming to DIN 332 Sheet 1 Form R. What cutting direction does the tool use and why does that matter? The tool has a right-hand cutting geometry, which is the conventional configuration for most turning and drilling machines and ensures predictable chip flow and engagement. How is the tool supplied for assembly into workshop operations? The article is supplied in a packaging unit of 5, allowing easy stocking and straightforward replacement in production settings. TECWERK: Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
2mm HSS Twist Drill DIN 338 ,short, roll forged, black, Type N - MetavCUT
Twist Drill Type N — HSS short, 2 mm, 118° (DIN 338), black, MetavCUT The Twist Drill Type N by MetavCUT is a short HSS metal drill designed for precise work with hand drills and drilling machines. Short HSS construction for high stability Type N normal spiral optimised for metal 118° tip for reliable centring on many metals Short overall length reduces flex for precise holes Precision and efficiency for metalworking tasks The Twist Drill from MetavCUT delivers a focused solution for metal drilling where accuracy matters. With a 2 mm diameter and a 118° tip angle, this short drill offers quick engagement and consistent centring on flat and slightly curved surfaces. The compact design minimises overhang, which reduces vibration and run-out; that yields cleaner holes and less rework. For tradespeople and skilled hobbyists who require repeatable results, the combination of a short geometry and the Type N spiral provides a reliable balance of cutting action and stability. Durable High Speed Steel built for routine stresses Constructed from HSS (High Speed Steel), the MetavCUT Twist Drill resists wear and retains hardness at elevated temperatures, making it suitable for alloyed and unalloyed steels as well as non-ferrous metals and some plastics. The roll‑formed HSS production reduces the risk of brittle failure, especially for smaller diameters under about 6 mm, and gives the tool a degree of elasticity that helps prevent breakage during standard drilling operations. For users seeking long tool life on repetitive metalwork, HSS offers an efficient compromise between cost and durability. Suited applications and user groups This short Twist Drill is intended primarily as a metal drill for use with both hand drills and drilling machines, making it appropriate for workshop technicians, maintenance engineers and experienced DIYers. The compact length and DIN 338 short‑drill specification make it particularly useful in situations with limited clearance or where rigidity is essential, such as fixture work or stepwise manufacturing tasks. Users benefit from improved control and less chatter, translating to higher first‑pass success rates and reduced time spent on deburring. Conformity to standards and practical tip guidance Manufactured according to DIN 338, the drill conforms to the standard for short spiral drills with cylindrical shank, ensuring dimensional consistency and interchangeability. The 118° tip angle is a versatile choice: it eases centring on softer metals and aluminium while keeping reasonable sharpness for general steel work. For harder materials, a larger tip angle may be preferable, but for general metalworking the selected geometry offers a pragmatic compromise between penetration speed and positional accuracy. Understanding tip geometry helps operators choose the right drill for each material and avoid excessive feed forces. We recommend the MetavCUT Twist Drill Type N as a dependable choice for precision metal drilling; if unsure whether this tool fits specific requirements or for further technical details, METAV Werkzeuge provides comprehensive advice — email info@metav-werkzeuge.com, call +49 2822 7131930 or message via WhatsApp +49 170 2837271 Technical data Designation: Twist Drill Brand: MetavCUT SKU: 40020-FDA Diameter: 2 mm Spiral length: 24 mm Overall length: 49 mm Tip angle: 118° Type: Type N For drill machine: Drilling Machine / Hand Drill Colour: black Execution: short Standard: DIN 338 Material: HSS Application: Drills for metal Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is a Twist Drill used for? The MetavCUT Twist Drill Type N is used primarily for drilling metal; it excels in machining high-strength materials and larger hole diameters where a resilient, easy-to-sharpen geometry is required. This form is relatively simple to grind and withstands substantial loads. Which three drill types exist? Common categories are metal drills, wood drills and stone/concrete drills; the MetavCUT Twist Drill belongs to the metal drill group and is optimised for ferrous and non-ferrous materials. Why are Twist Drills point‑sharpened? The Tip sharpening reduces the cross‑edge at the point of the Twist Drill, which significantly lowers friction forces and therefore requires less feed force. At the same time, a sharpened tip centres better in the workpiece, improving hole precision. Can a metal drill be used for wood? A metal drill such as the MetavCUT Twist Drill can be used in wood, but guidance and finish are often inferior compared with dedicated wood drills. Metal drills are easier to regrind and have less self‑pulling action, which can be an advantage or disadvantage depending on the application.
2mm HSS-E Twist Drill DIN 338 ,short, 5% cobalt-alloyed, Type N - MetavCUT
Twist Drill — Type N, 2 mm, short, 118°, 5% cobalt-alloyed, HSS‑E, fully ground, DIN 338 (MetavCUT) The Twist Drill Type N is a short HSS‑E metal drill designed for precise drilling in steels and non‑ferrous metals with high stability and clean hole quality. Short design for higher Stability 2 mm Diameter for precise Holes 118° Tip angle for improved Penetration 5% Cobalt‑alloyed HSS‑E for increased Wear resistance Fully ground Shank for excellent Concentricity Durable alloy construction for reliable metalworking Built from HSS‑E with a 5% cobalt alloy, this short drill offers elevated hardness and heat resistance compared with standard HSS. The cobalt enrichment improves wear resistance during prolonged cutting and helps maintain a sharp cutting edge under higher temperatures. Conforming to DIN 338, the design targets machining of metal where consistent tool life and repeatable results are required. Short geometry for higher stiffness and precise holes The reduced overall length and shorter projecting flute give the tool exceptional rigidity, minimizing deflection in demanding operations. A fully ground flute geometry produces sharp cutting lips and high roundness, resulting in clean holes with reduced burr formation. The combination of short design and ground manufacturing is particularly advantageous for precision drilling tasks on machine tools and drilling machines. Optimised for metal applications and professional use With its Type N normal spiral geometry, the drill is purpose‑engineered for metalworking: suitable for alloyed and unalloyed Steel, Cast Iron, non‑ferrous Metals and Plastics. The compact execution makes it well suited to workshop environments where tight tolerances and repeatable hole quality matter, making it a practical choice for professional technicians and advanced hobbyists alike. Practical handling and recommended machining practice The 118° tip angle balances penetration and centring, and when paired with the Type N geometry it remains effective for metal cutting while easing start‑up into the workpiece. For best results, employ appropriate cutting speeds and cooling/lubrication, especially when drilling harder materials; this reduces heat build‑up and extends tool life. The short, robust shape also lowers the risk of breakage for small diameters, particularly under careful machining conditions. Choose the MetavCUT Standard Line Twist Drill for dependable precision in metalworking — for technical advice or to confirm suitability for your application, contact METAV Werkzeuge: info@metav-werkzeuge.com | +49 2822 7131930 | WhatsApp +49 170 2837271 Designation: Twist Drill Brand: MetavCUT SKU: 47020-FDA Diameter: 2 mm Tip angle: 118° Type: Type N Execution: short Colour: 5% cobalt‑alloyed Material: HSS‑E Spiral length: 24 mm Overall length: 49 mm Shank execution: fully ground Norm: DIN 338 Model series: Standard Line For drilling machine: Drilling Machine / Hand Drilling Machine Application: Drills for metal Packaging unit: 10 Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the Twist Drill used for and which materials is it suited to? The MetavCUT Twist Drill Type N is primarily used for machining metal; it is suitable for alloyed and unalloyed steel, cast iron, non‑ferrous metals and certain plastics. The tool’s short HSS‑E construction with 5% cobalt offers improved heat and wear resistance, making it appropriate for demanding metal drilling tasks. Which three drill types are commonly distinguished? In workshop practice the three main drill categories are: metal drills, wood drills and stone/concrete drills. The MetavCUT Twist Drill falls into the metal drill group and is optimised for metalworking applications.
2mm HSS-G Twist Drill DIN 1869 ,extra long, bright finished - MetavCUT
Twist Drill — Drill for Metal, Diameter 2 mm, 135° Point Angle, Extra Long, Bright Finished, HSS‑G, DIN 1869, Fully Ground Shank (MetavCUT) The Twist Drill is an extra‑long Drilling Machine bit for metal, designed for deep, precise holes in steel, cast parts and hard plastics. Extra‑long design for deep, hard‑to‑reach holes HSS‑G material for precise, clean metal drilling 135° point angle optimised for harder workpieces Fully ground shank for high concentricity and accuracy Conforms to DIN 1869 for deep‑hole performance Deep holes with reliable precision The extra‑long design delivers a clear benefit when access is limited or when drilling deep bores: longer working length reduces the need for extensions and maintains tool stability. Made from HSS‑G, this bit provides high edge sharpness and excellent runout characteristics thanks to CNC grinding of the flutes. For users who require consistent hole geometry in metalworking, the fully ground geometry ensures cleaner chips and a more accurate finish compared with rolled alternatives. Faster cutting with less force Thanks to the ground spiral and optimized geometry, the tool drills when less axial force is applied, improving operator comfort and machine load. The use of HSS‑G enables up to 40% faster penetration in many steels and reduces required feed force by roughly 50% compared with conventional HSS bits. This means shorter cycle times in production and fewer stalled starts when working in alloys, sintered materials and non‑ferrous metals. Suited for demanding materials and tough conditions The 135° point angle is chosen specifically for harder materials such as stainless steel and tempered alloys; a larger point angle shortens the initial bite and improves centring on difficult surfaces. The tool’s geometry and the DIN 1869 specification make it particularly appropriate for deep drilling under adverse conditions, including cast iron and higher strength steels up to 1000 N/mm². When used with appropriate cooling, the drill maintains edge life and hole quality in industrial environments. Practical benefits for workshops and professionals This Twist Drill is ideal for machinists, maintenance technicians and toolroom staff who demand precise, repeatable holes without frequent regrinding. The fully ground shank supports accurate chucking and improved concentricity on hand and bench Drilling Machines, while the bright finished surface simplifies inspection and handling. For repeat operations, this bit reduces rework and scrap by delivering predictable chips and hole diameters. How the technology works — explained simply Grinding the flutes rather than rolling them creates sharper cutting edges and tighter tolerances. In practice, a fully ground HSS bit produces cleaner bore walls and better centring; the trade‑off is slightly higher brittleness, so cooling and steady clamping are recommended. The term DIN 1869 denotes the standard for deep‑hole twist drills and signals that the geometry is designed to evacuate chips reliably over long axial distances. Highly recommended: choose the MetavCUT Twist Drill for demanding deep‑hole metalworking tasks and contact METAV Werkzeuge for tailored advice — they offer expert consultation on applications and material pairings; email info@metav-werkzeuge.com or call +49 2822 7131930 for technical support Designation: Twist Drill Brand: MetavCUT SKU: 32020-FDA Diameter: 2 mm Point Angle: 135° Execution: Extra long Finish / Colour: Bright finished Material: HSS‑G Standard: DIN 1869 Overall Length: 125 mm Spiral Length: 85 mm Shank Execution: Fully ground Application: Drill for Metal Model Series: Standard Line For Drilling Machine: Drilling Machine Packaging Unit: 10 Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the Twist Drill used for and which materials suit it best? The MetavCUT Twist Drill for Metal is primarily used for machining high‑strength materials and larger diameters; its extra‑long form is designed for deep holes and locations that are hard to reach. The HSS‑G construction and ground spiral make it suitable for legated and unlegated steel, cast iron, sintered iron, non‑ferrous metals and hard plastics. Which three main drill types exist? In general the main categories are metal drills, wood drills, and masonry/concrete drills. The MetavCUT Twist Drill belongs to the metal drill category and is optimised for metalworking tasks. Why are Twist Drills pointed and what does that achieve? The point geometry reduces the cross‑cut at the tip, lowering friction and therefore the required feed force. By re‑sharpening or pointing the MetavCUT Twist Drill the cutting action improves, centring becomes better and drilling starts more reliably in the workpiece. Can the MetavCUT Twist Drill be used for wood? A metal drill like the MetavCUT Twist Drill can be used in wood, however guidance and finish are reduced compared with purpose‑made wood bits. The result is less precise hole edge quality and guidance, but easier resharpening and lower self‑feed tendency. For which drill depths is the Twist Drill most commonly used? The extra‑long Twist Drill is the preferred tool for through holes and deep bores. For diameters up to 20 mm and drilling depths up to 100 mm a twist drill is the most frequently used tool in metalworking. If unsure whether this tool meets specific requirements or if additional technical data is needed, METAV Werkzeuge provides comprehensive and competent advice. 📧 info@metav-werkzeuge.com ☎️ +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271
2mm HSS-G Twist Drill DIN 1869 ,extra long, bright finished - MetavCUT
Der Spiralbohrer von MetavCUT überzeugt durch HSS-G Materialqualität, eine extra lange Gesamtlänge von 160 mm und eine Tieflochspirale nach DIN 1869 – ideal für präzise, tiefe Bohrungen in legierten und unlegierten Stahl bis 1000 N/mm². Nutzen Sie die Kombination aus schneller Bohrleistung und reduzierter Anpresskraft für effizientere Fertigungsprozesse. Bestellen Sie den Spiralbohrer direkt über Metav Werkzeuge oder fragen Sie unsere Beratung bei Bedarf an. Spiralbohrer von MetavCUT – HSS-G extra lang Der Spiralbohrer ist ein extra langer, geschliffener HSS-G Bohrer für tiefe Metallbohrungen und anspruchsvolle Anwendungen in Werkstatt und Industrie. HSS-G geschliffen für scharfe Schnittkanten Extra lange Gesamtlänge 160 mm für tiefe Bohrungen Spirallänge 110 mm für zuverlässigen Spanabtransport Spitzenwinkel 135° für harte Werkstoffe DIN 1869 Tieflochspirale für erschwerte Bedingungen Präzise Schnitte bei harten Werkstoffen dank geschliffener Geometrie Die geschliffene Schaftausführung sorgt für hohe Rundlaufgenauigkeit und saubere Bohrlöcher. Durch den CNC-Schliff entstehen scharfe Kanten, die das Anbohren erleichtern und die Qualität der Bohrung erhöhen. Dies bedeutet für die Fertigung weniger Nacharbeit und bessere Passgenauigkeit bei Bauteilen aus Stahl oder Guss. Tieflochfähigkeit und Spanabfuhr für lange Bohrwege Mit einer Spirallänge von 110 mm und der extra langen Gesamtlänge von 160 mm ist dieser Bohrer speziell für tiefe Bohrungen ausgelegt. Die Tieflochspirale nach DIN 1869 verbessert den Spanabtransport und reduziert das Verstopfungsrisiko, wodurch längere, gleichmäßige Bohrungen möglich werden. Das Resultat ist eine höhere Prozesssicherheit bei komplexen Bohrvorgängen. Effizientes Bohren mit reduziertem Kraftaufwand Der geschliffene HSS-G Werkstoff erlaubt ein bis zu 40 % schnelleres Bohren bei bis zu 50 % geringerer Anpresskraft im Vergleich zu herkömmlichen HSS-Bohrern. Dadurch werden Motorbelastung und Werkzeugverschleiß reduziert, was besonders bei Serienfertigung und stationären Maschinen zu Kostenvorteilen führen kann. Vielseitigkeit bei Materialwahl und Anwendung Der Bohrer eignet sich für legierten und unlegierten Stahl, Gussstahl, Gusseisen, Sintereisen, Temperguss, Nichteisenmetalle und Hartkunststoff. Durch den Spitzenwinkel 135° dringt der Bohrer kontrollierter in harte Werkstoffe ein und minimiert Ausrisse an der Austrittskante. Das macht ihn zur geeigneten Wahl für anspruchsvolle Werkstücke in Werkstatt und Industrie. Sicherheitshinweise und empfohlene Einsatzweise Bei Verwendung in Handbohrmaschinen ist auf stabile Führung und geeignete Kühlung zu achten, weil geschliffene Bohrer empfindlicher gegen Verkantung sind. Bei stationärem Einsatz wird eine konstante Kühlschmierstoffzufuhr empfohlen, um Standzeit und Prozessstabilität zu erhöhen. ZENTRIERBOHREN bei hohen Durchmessern oder kritischen Passungen empfiehlt sich zur Verbesserung der Ergebnisqualität. Empfehlung: Den MetavCUT Spiralbohrer der Standard Line mit HSS-G für tiefe Metallbohrungen wählen und technische Details bei Bedarf per eMail an info@metav-werkzeuge.com oder telefonisch unter +49 2822 7131930 klären Produktmerkmale Artikelnummer: 33020-FDA Marke: MetavCUT Serie: Standard Line Bezeichnung: Spiralbohrer Daten Durchmesser: 2 mm Gesamtlänge: 160 mm Spirallänge: 110 mm Spitzenwinkel: 135° Verpackungseinheit: 10 Besonderheiten Material: HSS-G (Geschliffen, CNC-Schliff) Ausführung: extra lang Schaftausführung: geschliffen Norm: DIN 1869 (Tieflochspirale) Farbe: blank Für Bohrmaschine: Handbohrmaschine FAQ Für welche Materialien ist der Spiralbohrer geeignet? Der MetavCUT Spiralbohrer mit HSS-G eignet sich für legierten und unlegierten Stahl, Gussstahl, Gusseisen, Sintereisen, Temperguss, Nichteisenmetalle und Hartkunststoff und bietet damit hohe Vielseitigkeit in der Werkstatt. Ist der Bohrer für Handbohrmaschinen geeignet? Ja, die Ausführung erlaubt den Einsatz in Handbohrmaschinen, wobei der geschliffene Schaft eine sorgfältige Führung und gegebenenfalls Kühlung empfiehlt, um Bruchrisiken zu minimieren. Welche Vorteile bringt die DIN 1869 Tieflochspirale? Die Tieflochspirale erhöht den Spanabtransport bei tiefen Bohrungen und reduziert Verstopfungsrisiken, was bei der MetavCUT Standard Line Ausführung besonders bei langen Bohrwegen vorteilhaft ist. Was bedeutet HSS-G und warum ist das wichtig? HSS-G steht für geschliffenen Hochgeschwindigkeitsstahl; beim MetavCUT Spiralbohrer sorgt der CNC-Schliff für scharfe Kanten und hohe Rundlaufgenauigkeit, was zu sauberen Bohrlöchern führt. Wie beeinflusst der Spitzenwinkel die Bohrung? Der Spitzenwinkel von 135° ist für harte Werkstoffe optimiert und reduziert das Ausreißen an der Austrittskante, wodurch präzisere und saubere Bohrungen erzielt werden.
2mm HSS-G Twist Drill DIN 1869 ,extra long, bright finished - MetavCUT
Der extra lange Spiralbohrer von MetavCUT kombiniert HSS‑G Geschliffen, Tieflochspirale und einen Spitzenwinkel von 135° für schnelle, präzise Bohrungen in Stahl und Guss; die geschliffene Geometrie sorgt für hohe Rundlaufgenauigkeit, während die längere Arbeitslänge tiefe Bohrungen ermöglicht. Für Beratung und Bestellung stehen Metav Werkzeuge und die Fachberatung in Emmerich zur Verfügung. Spiralbohrer — HSS‑G Extra lang (MetavCUT Standard Line) Der Spiralbohrer ist ein extra langer, geschliffener HSS‑G Bohrer nach DIN 1869 für tiefe Bohrungen in legierten und unlegierten Stahl sowie Gusswerkstoffe Extra lange Ausführung für tiefe Bohrungen HSS‑G geschliffen für hohe Rundlaufgenauigkeit Spitzenwinkel 135° für harte Werkstoffe Gesamtlänge 200 mm, Spirallänge 135 mm Geeignet für Handbohrmaschine und stationären Einsatz Höhere Effizienz durch geschliffene HSS‑Geometrie Die HSS‑G Ausführung mit CNC‑Schliff ermöglicht sehr scharfe Schneiden und damit bis zu 40 % schnelleres Bohren bei deutlich geringerem Anpressdruck. Durch die präzise gefertigte Spannutengeometrie entsteht eine bessere Spanabfuhr und saubere Bohrlöcher, was Nachbearbeitung reduziert. Anwender profitieren von kürzeren Bearbeitungszeiten und stabileren Prozessbedingungen bei legierten Stählen und Gusseisen. Extra lange Bauform für tiefe und schwer zugängliche Bohrungen Die Ausführung Extra lang mit einer Gesamtlänge von 200 mm und einer Spirallänge von 135 mm ist speziell für tiefe Bohrungen und schwer zugängliche Bereiche konzipiert. Bei tiefen Bohrungen verbessert die Tieflochspirale die Spanführung und verringert Verstopfungen. Für beste Ergebnisse empfiehlt sich kühlmittelführung und stationärer Halt der Bohrmaschine, um die Gefahr von Bruch durch die geschliffene, etwas sprödere Ausführung zu minimieren. Praxistipps und Einsatzbereich für den Werkstattalltag Für den Durchmesser 2 mm empfiehlt sich die Einstufung in den Standard‑Bereich: Direktes Bohren ist möglich, bei hoher Präzision vorher mit einem Zentrierbohrer anpunkten. Der Spiralbohrer eignet sich für Handbohrmaschine und stationäre Säulenmaschinen gleichermaßen, wobei bei Verwendung an mobilen Geräten eine ruhige Führung und moderate Vorschubgeschwindigkeit die Standzeit erhöht. Kühlung verlängert die Lebensdauer besonders bei höheren Zugfestigkeiten. Materialverträglichkeit und präzise Anwendungsempfehlung Der Bohrer ist ausgelegt für legierte und unlegierte Stähle, Gussstahl, Gusseisen, Sintereisen, Temperguss, Nichteisenmetalle und harte Kunststoffe. Der Spitzenwinkel 135° reduziert das Anlaufen in harten Werkstoffen und verbessert das Anbohrverhalten bei Edelstahl und gehärteten Werkstoffen. Für großvolumige Serien in gehärtetem Stahl empfiehlt sich jedoch Hartmetallwerkzeug; dieses Produkt punktet bei universellen Metallaufgaben mit hoher Präzision. Für präzise Tieflochbohrungen empfiehlt MetavCUT den Einsatz dieses HSS‑G Spiralbohrers über Metav Werkzeuge; bei Fragen zur Anwendung kontaktieren Sie unsere Fachberatung per E‑Mail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 Produktmerkmale Artikelnummer: 34020-FDA Marke: MetavCUT Serie: Standard Line Bezeichnung: Spiralbohrer Norm: DIN 1869 (Spiralbohrer‑Norm) Fakten Durchmesser: 2 mm Gesamtlänge: 200 mm Spirallänge: 135 mm Spitzenwinkel: 135° Besonderheiten Material: HSS-G Schaft Ausführung: geschliffen Ausführung: extra lang Für Bohrmaschine: Handbohrmaschine Farbe: blank Verpackungseinheit: 10 SKU: 34020-FDA UID: 34020-FDA FAQ Welche Werkstoffe lassen sich mit dem Bohrer bearbeiten? Der MetavCUT Spiralbohrer (HSS‑G, Standard Line, SKU 34020-FDA) ist geeignet für legierte und unlegierte Stähle, Gussstahl, Gusseisen, Sintereisen, Temperguss, Nichteisenmetalle und harte Kunststoffe; bei sehr gehärteten Werkstoffen empfiehlt sich auf Hartmetall umzusteigen. Ist der Bohrer für Handgeführte Bohrmaschinen geeignet? Ja, der Spiralbohrer von MetavCUT wurde für den Einsatz an Handbohrmaschinen und stationären Maschinen konstruiert; bei mobiler Anwendung auf gute Führung und Kühlung achten, um Bruchrisiken zu minimieren. Wann ist der Spitzenwinkel 135° sinnvoll? Der 135° Spitzenwinkel des MetavCUT Spiralbohrers reduziert Anlaufprobleme und eignet sich besonders bei härteren Werkstoffen wie Edelstahl oder gehärtetem Stahl, da er die Anbohrzeit verkürzt und das Wandern reduziert. Warum ist der Bohrer geschliffen und was bedeutet das praktisch? Geschliffene Spannuten (HSS‑G) beim Spiralbohrer sorgen für sehr scharfe Schneiden und hohe Rundlaufgenauigkeit; das erhöht Präzision und Oberflächenqualität, verlangt aber vorsichtigere Handhabung und Kühlung, da die Werkzeuge spröder sein können. Wie viel tiefer kann man mit der extra langen Ausführung bohren? Die extra lange Bauform des MetavCUT Spiralbohrers ermöglicht tiefe Bohrungen dank verlängerter Arbeitslänge und Tieflochspirale; für sehr tiefe Löcher empfiehlt sich zusätzlich eine abgestufte Bohrfolge zur Entlastung der Querschneide.
2mm HSS-G Twist Drill DIN 1897 ,extra short, bright finished, Type N - MetavCUT
Twist Drill — Type N, 2 mm, 118° Tip, Extra Short, Bright Finished, HSS‑G, DIN 1897 (MetavCUT) The Twist Drill Type N is a compact HSS‑G metal drill bit engineered for precise hand drilling in confined spaces and thin materials. Extra‑short design for improved stability and less breakage Ground HSS‑G for up to 40% faster drilling 118° tip for better centring on curved surfaces Cylindrical shank fits standard three‑jaw chucks Greater Stability and Faster Drilling for Metalworking The Extra Short geometry reduces overhang and increases rigidity, so the bit resists bending and breakage during demanding operations. The ground HSS‑G cutting edges allow up to 40% faster drilling while requiring about 50% less feed force compared with conventional HSS bits, which delivers measurable efficiency gains for production and repair work. Conforming to DIN 1897, this format is optimised for Hand Drills and Angle Drills where space is limited or access is restricted. Clean Holes in a Wide Range of Materials With Type N spiral geometry and a 118° Tip, this bit is designed primarily for metal applications including alloyed and unalloyed steel, cast steel, cast iron, sintered iron, tempered cast, non‑ferrous metals and hard plastics. The tip angle improves centring on slightly curved surfaces and eases entry into softer metals such as aluminium. For users less familiar with drilling technology: the tip angle determines how sharply the bit cuts into the Workpiece—a larger angle reduces tipping and provides steadier guidance. Universal Shank, Practical Limitations, and Best Practices The Cylindrical Shank (round shank) ensures universal compatibility with standard three‑jaw chucks and quick change between typical Hand Drills. For applications with high torque, clamping should be checked as round shanks can slip under extreme loads compared with hex or triangular shanks. The extra‑short overall length (Total length 38 mm, Spiral length 12 mm) is particularly advantageous when drilling thin sheet metal, profiles or components in confined assemblies where a standard‑length bit would be impractical. Who benefits and why this bit stands out Maintenance technicians, metal fabricators and skilled hobbyists will value the combination of compact design and robust HSS‑G performance. As part of the Standard Line from MetavCUT, the bit offers a reliable compromise between cutting speed and durability, delivering reproducible hole quality in everyday workshop scenarios. The relatively small 2 mm diameter and extra short execution make it a specialist choice when precision and low vibration are required. For precision metal drilling choose MetavCUT’s Twist Drill Type N — METAV Werkzeuge offers comprehensive technical advice and application support via eMail: info@metav-werkzeuge.com, Phone: +49 2822 7131930, WhatsApp: +49 170 2837271 Designation: Twist Drill (Spiralbohrer) Marke: MetavCUT SKU: 56020-FDA Diameter: 2 mm Tip Angle: 118° Type: Type N Execution: Extra short Finish / Colour: Bright finished Material: HSS-G Spiral Length: 12 mm Total Length: 38 mm Shank Execution: Cylindrical Suitable For: Drilling Machine (Hand Drill) Application: Drills for metal Model Series: Standard Line Norm: DIN 1897 Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ For what is a Twist Drill used? The Twist Drill from MetavCUT (Type N) is mainly applied to machining high‑strength materials and larger bore diameters; its form is easy to resharpen and stands up to greater loads, making it suitable for demanding metalworking where robust performance is required. Which three drill types exist? In general classification there are Metal Drills, Wood Drills and Stone/Concrete Drills; the MetavCUT Twist Drill belongs to the Metal Drill group and is optimised for ferrous and non‑ferrous metals. Why are Twist Drills pointed (regrinded)? MetavCUT Twist Drill bits are pointed to reduce the cross‑cut at the tip; this lowers friction significantly, reducing required feed forces and improving centring of the tip in the Workpiece. Can a Twist Drill be used to drill wood? A metal Twist Drill (Type N) can be used in wood, but the MetavCUT metal drill offers poorer guidance and a less clean finish compared with dedicated Wood Drills; however it is easier to resharpen and has lower self‑feeding tendencies. At which drilling depths is the Twist Drill most used? A full‑bore hole is typically executed with a Twist Drill; for diameters up to 20 mm and drilling depths up to 100 mm the Twist Drill is the most commonly used tool. What is better, HSS or HSSE? The common belief that HSSE steels are always superior to standard HSS is incorrect; when choosing between HSS and HSSE for a MetavCUT Twist Drill, assess whether the working conditions justify the higher purchase cost of HSSE.
2mm HSS-G Twist Drill DIN 338 ,fully ground, silver - MetavCUT
Die Kombination aus HSS-G, geschliffener Geometrie und Sechskantschaft sorgt für präzise Metallbohrungen bei reduziertem Kraftaufwand; die Konstruktion ermöglicht schnelleres Bohren und einfache Werkzeugwechsel. Bestellen Sie den Bohrer direkt über Metav oder fragen Sie unsere Beratung bei Bedarf an. Spiralbohrer 2 mm (HSS-G) – MetavCUT Standard Line Der Spiralbohrer ist ein geschliffener Kurzspiralbohrer für präzise Metallbohrungen mit Handbohrmaschine und stationären Maschinen Geschliffener HSS-G für saubere Metallbohrungen Sechskantschaft 6,3 mm für sicheren Bithalter DIN 338 Kurzspiralbohrer für vielseitigen Einsatz 2 mm Durchmesser für präzise Vorbohrungen Bis zu 40 % schnelleres Bohren bei geringer Anpresskraft Höchste Präzision durch geschliffene Geometrie Der geschliffene HSS-G sorgt für sehr scharfe Schneidkanten und eine hohe Rundlaufgenauigkeit, wodurch saubere Bohrloch-Kanten entstehen. Diese Ausführung erlaubt bis zu 40 % schnelleres Bohren bei deutlich reduziertem Anpressdruck, was insbesondere in der Serienvorbereitung und bei wiederkehrenden Metallarbeiten Zeit spart. Nur ein Vorteil wird hier fokussiert: Effizienz bei gleichbleibender Qualität. Optimaler Einsatz im Standard-Bereich für 2 mm Für den Durchmesser 2 mm fällt die Anwendung in den Standard-Bereich, ideal für Werkstatt, Montage und DIY-Projekte. Der Bohrer eignet sich zum Bohren in dünne bis mittlere Bleche, Profile und Flachstahl sowie in Aluminium und Kunststoffe, sofern vor dem Bohren angesenkt oder angepunktet wird. Ein klarer Nutzen: Schnelle und wiederholbare Ergebnisse bei handgeführten Geräten und stationären Maschinen. Sechskantschaft für schnellen Werkzeugwechsel Der integrierte Sechskantschaft ermöglicht formschlüssige Drehmomentübertragung in Bit-Haltern und verhindert Durchrutschen im Schnellwechsel. Deshalb geht der Wechsel zwischen Akkuschrauber und Bohrfutter schnell und sicher vonstatten, wodurch Rüstzeiten reduziert werden. Ein praktischer Vorteil: weniger Unterbrechungen im Arbeitsablauf. Normgerechte Kurzspiralbohrer nach DIN 338 Die Einhaltung von DIN 338 bestätigt die Klassifizierung als kurzer Spiralbohrer mit Zylinderschaft aus Schnellarbeitsstahl. Die geschliffene Ausführung bedeutet CNC-Schliff der Spannuten und damit präzise Geometrie, die besonders bei legierten und unlegierten Stählen glänzt. Daraus resultiert Verlässlichkeit beim Bohren und bessere Wiederholgenauigkeit. Praxistipps für Langlebigkeit und saubere Bohrbilder In der Praxis empfiehlt sich ein zentrales Anpunkten vor dem Bohren sowie die Nutzung von Kühlschmierstoff bei anspruchsvollen Materialien. Der Spitzenwinkel 118° unterstützt das Zentrieren auf ebenen Flächen und reduziert Ausrisse bei dünnen Blechen. Durch diese einfache Arbeitsweise bleibt die Standzeit hoch und das Ergebnis reproduzierbar. Empfehlung: Für präzise Metallbohrungen empfiehlt MetavCUT die Standard Line Ausführung mit geschliffener HSS-G-Geometrie; bei Fragen zur Anwendung oder zur passenden Packungsgröße wenden Sie sich bitte an Metav – E‑Mail: info@metav-werkzeuge.com, Telefon: +49 2822 7131930, WhatsApp: +49 170 2837271 Produktmerkmale Artikelnummer: 57020-FDA Marke: MetavCUT Serie: Standard Line Bezeichnung: Spiralbohrer Daten Durchmesser: 2 mm Gesamtlänge: 70 mm Spirallänge: 24 mm Spitzenwinkel: 118° Besonderheiten Material: HSS-G Ausführung: geschliffen Schaft Ausführung: sechskant Norm: DIN 338 Für Bohrmaschine: Handbohrmaschine Verpackungseinheit: 10 Farbe: silber FAQ Ist der Bohrer für Handbohrmaschinen geeignet? Ja, der Spiralbohrer von MetavCUT (Standard Line, SKU 57020-FDA) ist für den Einsatz in Handbohrmaschinen vorgesehen und eignet sich besonders für dünne bis mittlere Metallbleche. Welches Material hat der Bohrer und welche Vorteile bietet es? Der Bohrer besteht aus HSS-G; die geschliffene Geometrie liefert scharfe Kanten und hohe Rundlaufgenauigkeit, wodurch saubere Bohrlöcher in Stahl und Guss erzielt werden. Welchen Spitzenwinkel hat der Bohrer und was bedeutet das? Der Spiralbohrer hat einen Spitzenwinkel von 118°, was das Zentrieren erleichtert und Ausrisse bei dünnen Blechen reduziert. Für welche Metalle ist der Bohrer geeignet? Der Spiralbohrer eignet sich für legierte und unlegierte Stähle, Gussstahl, Gusseisen, Sintereisen, Temperguss sowie Nichteisenmetalle und Hartkunststoffe. Wie viele Stück sind in einer Verpackungseinheit? Die Verpackungseinheit umfasst 10 Stück, wie in den Produktdaten angegeben.
2mm HSS-G Twist Drill DIN 338 ,left cutting - MetavCUT
Twist Drill – Left-Cutting HSS‑G, 2 mm, 135° (DIN 338) A Twist Drill from MetavCUT designed as a left-cutting metalworking drill for drilling machines, ideal for removing broken screws and precision metal drilling. Precision 2 mm diameter for tight tolerances 135° tip for harder materials like stainless steel Left-Cutting grind for screw extraction tasks High-speed HSS‑G material for long tool life Complies with DIN 338 for short twist drills Durable HSS‑G Construction for Consistent Performance Built from HSS‑G, this Twist Drill delivers a combination of toughness and wear resistance required for industrial metalworking. The alloyed high-speed steel provides a stable cutting edge and extended service life, so fewer tool changes are needed during workshop routines. This results in predictable performance and reduced downtime when processing materials such as steel, cast iron and non‑ferrous metals. Faster Penetration and Lower Feed Force for Hard Materials When working with tougher materials, the 135° tip geometry and the left‑cutting grind enable a more controlled entry and a flatter cutting action, which is particularly effective for stainless steel. The specially ground left‑cutting design can reduce required thrust and, according to manufacturer data, can achieve significantly faster drilling rates while lowering operator effort — a clear advantage in repetitive or demanding drilling tasks. Practical Use Cases: Repair, Extraction and Precision Drilling In repair and maintenance contexts the left‑cutting execution proves especially useful for backing out broken or seized fasteners, because the reverse rotation often helps remove screw remnants. The short cylindrical shank is suited for mounting in conventional drilling machines and ensures stable clamping. MetavCUT’s Profi Line aims at tradespeople and workshops that require reliable tools for metal fabrication, maintenance and engineering tasks. Compliance, Care and Compatibility for Industrial Workflows Complying with DIN 338, this short twist drill is specified for cylindrical shank drills made of high‑speed steel and is suitable for machine use on stationary or portable drilling machines with left rotation. The geometry also makes re‑grinding straightforward, so sharpening and reconditioning are practical in a workshop setting. For users unsure about compatibility with a specific machine or material, METAV Werkzeuge provides expert guidance and technical support. Choose the MetavCUT Profi Line Twist Drill for dependable left‑cutting performance in metalworking; METAV Werkzeuge offers comprehensive advice and technical support — email info@metav-werkzeuge.com, call +49 2822 7131930 or contact via WhatsApp +49 170 2837271 Designation: Twist Drill Brand: MetavCUT SKU: 60020-FDA Model Series: Profi Line Execution: Left-Cutting For Drilling Machine: Drilling Machine Tip Angle: 135° Diameter: 2 mm Material: HSS-G Norm: DIN 338 Application: Drills for Metal Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is a Twist Drill used for? Twist Drills from MetavCUT are used primarily for machining high‑strength materials and larger drill diameters; this type of Twist Drill is slightly easier to re‑sharpen and withstands higher loads, making it suitable for extracting broken screws and demanding metalworking operations. Which 3 drill types are there? The main categories are Metal Drills, Wood Drills and Masonry/Concrete Drills; MetavCUT supplies Twist Drills specifically designed for metalworking applications.
2mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Twist Drill (Spiralbohrer) — 2 mm • 135° • Type N • Bright Finished • Short • DIN 338 • HSS-G • Fully Ground Shank — MetavCUT The Twist Drill by MetavCUT is a short Type N drilling tool designed for precision metalworking on drilling machines, offering fast penetration and high stability for hardened and alloyed steels. Short Type N design for stable drilling High-performance HSS-G material for demanding metals 135° tip angle for harder workpieces Fully ground shank for precise concentricity Conforms to DIN 338 for short twist drills Faster, more efficient metalworking thanks to HSS-G technology The HSS-G construction reduces drilling time and operator effort by up to 40% compared with conventional HSS tools while requiring less axial force. This advantage is particularly relevant when working with Alloyed Steel, Cast Steel or Hard Plastics, where higher cutting speeds and consistent results matter. The short geometry minimises deflection, so holes stay concentric and rework is reduced. Greater stability and precision for demanding applications A 135° tip angle improves centring and reduces walking on curved or hardened surfaces, which means fewer pilot operations are needed. Combined with the fully ground shank, this Twist Drill delivers tighter runout and better tool grip in the chuck of a drilling machine, enhancing hole quality and extending tool life under elevated cutting forces. Designed for professional metalworkers and workshops Engineered for industrial and trade users, this short Type N twist drill suits tasks where stiffness and repeatable accuracy are required. It is ideal for machinists, maintenance technicians and metal fabrication shops that need reliable performance on stainless steel, non-ferrous metals and cast components without frequent tool changes. DIN 338 compliance explained and practical tip Built to DIN 338 specifications for short twist drills with cylindrical shanks, this product follows standardised lengths and tolerances to ensure interchangeability and predictable behaviour in production setups. For best results, use appropriate cutting fluid and moderate feed for larger diameters; this preserves the sharpened geometry and sustains the advantage of the reduced axial force. Strong recommendation: Choose the MetavCUT Twist Drill for precision metal drilling and contact METAV Werkzeuge for tailored technical advice — eMail: info@metav-werkzeuge.com — Phone: +49 2822 7131930 — WhatsApp: +49 170 2837271 Designation: Twist Drill (Spiralbohrer) Brand: MetavCUT SKU: 27020-FDA Type: Type N Diameter: 2 mm Tip Angle: 135° Material: HSS-G Execution: Short Colour: Bright Finished Shank: Fully Ground Spiral Length: 24 mm Total Length: 49 mm Standard: DIN 338 Application: Drills for metal For Drilling Machine: drilling machine Model Series: Basic Line Packaging Unit: 10 Manufacturer: MetavCUT Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What materials can I reliably drill with the Twist Drill by MetavCUT (Type N)? The MetavCUT Twist Drill (Type N) made from HSS-G is especially suited for alloyed and unalloyed steels, cast steel, cast iron, sintered iron, temper-cast materials, non-ferrous metals and hard plastics; it offers improved penetration and wear resistance compared with conventional HSS. Is the MetavCUT Twist Drill suitable for use in a hand-held drill? Although primarily intended for use on a drilling machine, the MetavCUT Twist Drill can be used in hand-held drills for less demanding tasks; however, the short design and fully ground shank deliver optimal accuracy and reduced runout when clamped in a machine chuck. For what is a Twist Drill mainly used? A Twist Drill is primarily applied for machining high-strength materials and larger diameters; this form is easy to resharpen and withstands greater loads, making it the standard choice for metalworking and tough materials. Which three drill types exist? The three main categories are metal drills, wood drills and stone/concrete drills.
2mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Twist Drill (Type N) — MetavCUT Profi Line, 2 mm, short, HSS‑G, DIN 338, bright finished The MetavCUT Profi Line Twist Drill is a short Type N metalworking bit designed for precise drilling in metals using a Drilling Machine, featuring a 2 mm Diameter, 118° Point Angle, fully ground Shaft and HSS‑G material MetavCUT Profi Line Twist Drill Short design for increased Stability Fully ground shaft for high Precision HSS‑G for fast metal drilling 118° point angle for easier Centring Precise metalworking with higher stability and control The short Twist Drill construction improves Stability by reducing the overhang from the Chuck, which lowers the tendency to flex and deflect during drilling. This compact geometry specifically benefits work in confined set‑ups and on drilling machines where rigidity matters. As a result, users achieve cleaner holes and extended tool life when compared to longer bits under the same conditions. Faster cutting and lower feed thanks to HSS‑G A HSS‑G (ground High Speed Steel) geometry offers sharper cutting edges and a consistently precise flute profile. For the MetavCUT Profi Line Twist Drill this translates into up to 40% faster drilling and around 50% less thrust compared with conventional HSS variants, making the tool especially effective on alloyed and unalloyed Steel, Cast Steel, Gusseisen and other hard substrates. Ground drills deliver superior runout accuracy which is vital for repeatable, professional results. Why the 118° point and Type N matter for metal Using a 118° Point Angle helps the MetavCUT Twist Drill to centre reliably on flat and slightly curved surfaces while providing a balanced entry into many metals. The designation Type N identifies the Normal spiral geometry – the classic choice for metalworking – optimised for chip evacuation and steady feed rates. For workshop operators this combination reduces wandering at the start of the hole and supports consistent hole quality. Practical handling and recommended applications The fully ground Shaft Finish improves grip in the Chuck and enhances concentricity, which benefits precision drills in production or maintenance. Due to its short overall length and robust profile, this Twist Drill is recommended for demanding operations on Drilling Machines and stationary equipment. Cooling or intermittent pecking is advised for deeper holes or tougher alloys to avoid overheating and premature wear. We recommend the MetavCUT Profi Line Twist Drill for precision metalworking and invite you to contact METAV Werkzeuge for tailored technical advice — eMail: info@metav-werkzeuge.com · Phone: +49 2822 7131930 · WhatsApp: +49 170 2837271 Twist Drill Brand: MetavCUT SKU: 48020-FDA Diameter: 2 mm Point Angle: 118° Type: Type N Execution: short Colour: bright finished Shaft Finish: fully ground Material: HSS‑G Model Series: Profi Line Spiral Length: 24 mm Overall Length: 49 mm For Machine: Drilling Machine Standard: DIN 338 Application: Drills for metal Packaging Unit: 10 Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the MetavCUT Twist Drill best used for? The MetavCUT Twist Drill (Type N) is primarily used for machining high‑strength materials and larger drill diameters in metalworking; its ground geometry is easy to re‑grind and withstands high loads while providing clean, precise holes. Which three drill types exist? Common drill categories are Metal Drills, Wood Drills and Masonry/Concrete Drills; the MetavCUT Twist Drill falls into the Metal Drill category and is optimised for steel and similar materials. Why are Twist Drills sharpened? Sharpening reduces the cross‑cutting edge at the tip of the Twist Drill, which lowers friction and therefore the required feed forces, while also improving centring of the drill tip in the workpiece. Can a metal Twist Drill be used to drill wood? A metal drill such as the MetavCUT Twist Drill can be used in Wood, but guidance and finish are generally inferior compared with dedicated Wood Drills; metal bits are easier to re‑grind and typically have less self‑pulling action.
2mm HSS-G Twist Drill DIN 338 ,short, TIN-coated - MetavCUT
Introducing Twist Drill — Short HSS‑G Twist Drill (Ø 2 mm, 118° Tip, TiN‑coated, DIN 338) from MetavCUT The Twist Drill is a short HSS‑G drill designed for precision metalworking in drilling machines, offering stability and fast chip evacuation for demanding metal applications. Short Twist Drill for precision metal drilling TiN‑coated surface for extended tool life Fully ground shank for fast, stable drilling 118° Tip for reliable centring Conforms to DIN 338 for short HSS drills Greater Stability for Precision Metalworking This short HSS‑G Twist Drill (Ø 2 mm, Total Length 49 mm, Spiral Length 24 mm) delivers enhanced stability thanks to its reduced overhang. The shorter projection from the chuck minimises vibration and deflection, which results in cleaner holes and improved repeatability when working with Steel, Cast Iron or Non‑Ferrous Metals. Use in stationary or machine drilling operations yields the best accuracy, especially for tight tolerances. Durable Surface and Faster Cutting Performance The TiN‑coating significantly reduces friction and increases wear resistance, extending tool life under metal‑cutting conditions. The fully ground (HSS‑G) geometry provides very sharp cutting edges and high concentricity; this enables up to 40% faster drilling and requires noticeably less feed force than conventional HSS drills. For optimum results and prolonged life, employ appropriate coolant to further reduce heat and abrasion during machining. Practical Tip Geometry and Application Guidance With a 118° Tip, this short twist drill balances entry behaviour and centring; the angle supports reliable positioning on slightly curved surfaces and aids initial penetration. Although 118° tips are commonly recommended for softer materials like Aluminium and Wood, this short HSS‑G version is engineered to perform reliably in a wide range of metals when used with suitable cutting parameters. For very hard alloys, consider adjusting feed or selecting a different tip geometry. Conformity, Handling and Recommended Use Manufactured to DIN 338 as a short spiral drill with cylindrical shank, this tool features a ground flute profile that provides clean chip formation and precise hole quality. The fully ground shank simplifies clamping and improves run‑out accuracy. Due to the ground production method, occasional increased brittleness is possible; therefore, secure clamping and steady feeds are advised. Ideal for professional workshops, maintenance departments and precision metalworking tasks. Choose the MetavCUT short Twist Drill for reliable, high‑precision metal drilling — for expert advice and application support contact METAV Werkzeuge; Email: info@metav-werkzeuge.com · Phone: +49 2822 7131930 · WhatsApp: +49 170 2837271 Designation: Twist Drill Marke: MetavCUT SKU: 28020-FDA Diameter: 2 mm Total length: 49 mm Spiral length: 24 mm Tip angle: 118° Execution: short Colour/Surface: TiN‑coated Shank execution: fully ground Material: HSS‑G Application: Drills for metal Model series: Basic Line For use in: Drilling Machine Standard: DIN 338 Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the Twist Drill used for and which materials does it suit? The MetavCUT Twist Drill (short HSS‑G) is mainly applied to the machining of high‑strength materials and larger hole diameters; its short design improves stability and precision, making it suitable for alloyed and unalloyed Steel, Cast Iron, Copper, Bronze and Hard Plastics when used on drilling machines with appropriate cutting parameters. Which three drill types exist? The three common drill families are Metal drills, Wood drills and Stone/Concrete drills; each is optimised in geometry and coating for its target material and application.
2mm HSS-G Twist Drill DIN 338 ,short, TIN-coated, Type N - MetavCUT
Der kurze Spiralbohrer von MetavCUT verbindet hohe Stabilität durch die kurze Auskraglänge mit langlebiger TIN-Beschichtung und geschliffener HSS-G-Geometrie; das Ergebnis sind präzise Bohrungen in Stahl und NE-Metallen bei reduziertem Verschleiß. Bestellen Sie den Spiralbohrer direkt über Metav Werkzeuge oder kontaktieren Sie unsere Beratung für technische Details und Anwendungsfragen. Spiralbohrer HSS-G kurz von MetavCUT Der Spiralbohrer HSS-G kurz eignet sich für präzise Metall-Bohrungen mit Handbohrmaschine und stationären Maschinen Kurze Ausführung für höhere Stabilität HSS-G geschliffen für präzise Metallbohrungen TIN-Beschichtung reduziert Reibung und Verschleiß 118° Spitze für einfache Zentrierung DIN 338 Norm, Zylinderschaft, SKU 46020-FDA Stabilität und Präzision bei metallbearbeitung Die kurze Ausführung sorgt für eine deutlich geringere Auskraglänge und damit für bessere Stabilität und weniger Durchbiegung bei Bohrungen in harten Werkstoffen. Durch die geschliffene HSS-G-Geometrie entstehen sehr scharfe Schneiden und eine hohe Rundlaufgenauigkeit, was saubere, passgenaue Bohrlöcher ermöglicht. Für Anwender bedeutet das geringeren Nacharbeitsaufwand und höhere Wiederholgenauigkeit bei Serien und Einzelteilen. Beschichtung, Verschleißreduzierung und Lebensdauer Die TIN-Beschichtung (Titan-Nitrid) reduziert die Reibung an der Schneide und verbessert die Wärmebeständigkeit während des Bohrens. In der Praxis führt das zu einer spürbar längeren Lebensdauer des Werkzeugs und zu weniger Verformung bei hohen Schnittgeschwindigkeiten. Bei Verwendung einer geeigneten Kühlung werden thermische Belastungen weiter reduziert, sodass die Bohrleistung in legiertem und unlegiertem Stahl konstant bleibt. Geeignete Materialien und Maschinentypen Der Bohrer ist für die Bearbeitung von legiertem und unlegiertem Stahl, Temperguss, Gusseisen, Sintereisen sowie Nichteisenmetallen wie Kupfer, Bronze und Neusilber sowie Hartkunststoff ausgelegt. Die Konstruktion mit Zylinderschaft macht ihn kompatibel mit Handbohrmaschine und stationären Bohrmaschinen; bei kleinen Durchmessern empfiehlt sich besonders eine hohe Drehzahl und saubere Spannaufnahme, um Bruchrisiken zu minimieren. Schneidgeometrie, Spitzenwinkel und Anwendungspraktiken Der Spitzenwinkel von 118° ist optimal für klassische Metallbearbeitung und erleichtert das Zentrieren auf geraden und leicht gewölbten Flächen. Geschliffene Bohrer bieten schärfere Kanten als gewalzte Varianten, sind jedoch empfindlicher gegenüber seitlicher Belastung; daher empfiehlt sich kontrollierter Vorschub und, bei Bedarf, Vorbohren bei dickeren Werkstoffen. Die geschliffene Ausführung ermöglicht bis zu 40 % schnellere Vorschübe bei gleichzeitig bis zu 50 % reduzierter Anpresskraft im Vergleich zu konventionellen HSS-Bohrern. Zielgruppe und typische Einsatzszenarien Dieser Bohrer ist ideal für Werkstätten, Montagebetriebe und Fachhandwerker, die präzise Metallbohrungen verlangen, aber keine überlange Auskraglänge benötigen. Die Kombination aus Stabilität, Beschichtung und geschliffener Präzision macht ihn zur passenden Wahl für Reparaturarbeiten, Maschinenbau-Einzelteile und feine Serien in der Werkstattumgebung. Empfehlung: Für anspruchsvolle Metallbearbeitung die MetavCUT Ausführung mit TIN-Beschichtung wählen und direkt bei Metav Werkzeuge anfragen per eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 Produktmerkmale Artikelnummer: 46020-FDA Marke: MetavCUT Bezeichnung: Spiralbohrer Modellserie: Standard Line Norm: DIN 338 Ausführung: kurz Typ: Typ N Material: HSS-G Schaft: geschliffen Farbe/Beschichtung: TIN-beschichtet Daten Durchmesser: 2 mm Gesamtlänge: 49 mm Spirallänge: 24 mm Spitzenwinkel: 118° Verpackungseinheit: 10 Besonderheiten TIN-Beschichtung reduziert Reibung und erhöht Lebensdauer Geschliffen (HSS-G) sorgt für hohe Schneidpräzision Zylinderschaft für Handbohrmaschine und stationäre Aufnahmen DIN 338: kurze Spiralbohrer mit Zylinderschaft, geeignet für Metallbearbeitung FAQ Für welche Werkstoffe ist der Bohrer geeignet? Der MetavCUT Spiralbohrer HSS-G kurz ist geeignet für legierten und unlegierten Stahl, Temperguss, Gusseisen, Sintereisen sowie Nichteisenmetalle wie Kupfer und Bronze und für Hartkunststoff. Kann der Bohrer mit einer Handbohrmaschine verwendet werden? Ja, der Zylinderschaft und die kurze Ausführung sind auf den Einsatz mit Handbohrmaschine ausgelegt; bei stationärem Einsatz erhöht sich die Präzision weiter. Was bedeutet geschliffen bei diesem Bohrer? Geschliffen bedeutet, dass die Spirale und Schneiden per Schleifen hergestellt wurden, was sehr scharfe Kanten und hohe Rundlaufgenauigkeit erzeugt; das erhöht die Bohrqualität, macht das Werkzeug aber empfindlicher gegen seitliche Belastung. Wie wirkt sich die TIN-Beschichtung aus? Die TIN-Beschichtung reduziert Reibung und Wärmeeintrag, erhöht die Standzeit des Bohrers und ermöglicht gleichbleibende Schnittbedingungen bei höheren Drehzahlen. Wie viele Bohrer sind in einer Verpackungseinheit? Die Verpackungseinheit enthält 10 Stück; die SKU für dieses Produkt lautet 46020-FDA.
2mm HSS-G Twist Drill DIN 338 ,short, TIN-coated, Type N - MetavCUT
Twist Drill — Short, Type N, 2 mm, 118°, TIN-coated, HSS-G, DIN 338 by MetavCUT A short Twist Drill Type N designed for precision metalworking with drilling machines, combining TIN coating and HSS-G ground geometry for increased speed and tool life. Short design for increased stability TIN-coated surface for reduced wear HSS‑G ground for up to 40% faster drilling Conforms to DIN 338 for short spiral drills Higher efficiency and longer tool life for metalworking The TIN-coated HSS‑G geometry reduces friction at the cutting edges and, when used with an appropriate cooling system, significantly lowers wear. This results in a measurable increase in service life and enables the short spiral drill to maintain cutting performance in demanding tasks. The ground flute geometry allows up to 40% faster drilling and requires about 50% less thrust than conventional HSS drills, delivering clear productivity gains in workshop environments. Precision and stability for toughest conditions A shorter overall length and reduced overhang provide markedly higher rigidity, minimising deflection and improving hole accuracy in metal components. The Type N normal spiral profile and 118° tip angle support reliable centring and consistent chip evacuation during use on rotating drilling machines. For operations requiring high concentricity and repeatable hole quality, the short spiral design is the practical choice. Suitable materials and recommended use This short spiral drill is made from HSS-G and is intended primarily for metal applications such as alloyed and unalloyed steel, cast steel, cast iron, sintered iron, copper, bronze and hard plastics. The TIN coating is particularly effective when combined with external cooling, as it reduces friction and thermal wear. Given the ground manufacturing process, the drill offers sharp edges and clean bore surfaces but benefits from stationary or well-supported drilling setups to avoid breakage. For professionals who demand reliability and service Designed for professional workshops, maintenance teams and precision manufacturers, the Profi Line short drill balances speed, accuracy and durability. Its compliance with DIN 338 ensures standardised dimensions and quality for short cylindrical‑shank twist drills. Choosing a TIN-coated, fully ground drill reduces tool changes and downtime, supporting more efficient workflows and a more sustainable tool usage pattern. Strong recommendation: Rely on MetavCUT quality and METAV Werkzeuge’s expert advisory service for application‑specific selection and technical support. Contact METAV Werkzeuge for personalised guidance via info@metav-werkzeuge.com or by phone +49 2822 7131930; WhatsApp +49 170 2837271 Designation: Twist Drill Brand: MetavCUT SKU: 41020-FDA Diameter: 2 mm Tip angle: 118° Type: Type N Length of spiral: 24 mm Overall length: 49 mm Shank design: fully ground Execution: short Coating / Colour: TIN-coated Material: HSS-G Model series: Profi Line For drilling machine: drilling machine Application: Drills for metal Standard: DIN 338 Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is a Twist Drill used for and which materials suit it best? A MetavCUT Twist Drill (Type N, HSS‑G, TIN‑coated) is primarily used for machining metal; it is suitable for alloyed and unalloyed steel, cast iron, copper, bronze and hard plastics. The combination of a short design and hard coating makes it especially effective for precise metal drilling tasks. Which three drill types exist? The main categories are metal drills, wood drills and masonry/concrete drills; each is optimised in geometry and tip design for the intended material and machining demands.
2mm HSS-G Twist Drill DIN 338 - MetavCUT
Twist Drill – Drill Bit for Metal, 2 mm, 135° Point Angle, HSS‑G, DIN 338 The Twist Drill is a precision metalworking drill bit designed for drilling machines and hand drills, offering a 2 mm diameter, 135° point angle and HSS‑G construction for reliable, fast metal drilling. Twist Drill 2 mm for metal 135° Point Angle for harder materials HSS‑G for high wear resistance Conforms to DIN 338 standard Up to 40% faster drilling with less force Exceptional Durability from HSS‑G Construction The Twist Drill is made from HSS‑G (High Speed Steel with enhanced grinding), which provides improved wear resistance and thermal stability compared with standard HSS. This material choice reduces tool wear during repeated metal drilling operations and extends service life, so fewer replacements are needed. The robust construction is particularly advantageous when working with alloyed and unalloyed steels, cast steels and non‑ferrous metals. Faster, Cleaner Holes with a 135° Point A 135° point angle optimises entry into harder materials by reducing chipping and improving centering on stainless steels and hardened surfaces. The specially ground tip ensures clean starting and produces holes with reduced burr formation. According to the product specification, the design enables up to 40% faster drilling and requires significantly less feed force, which makes bench and portable drilling more efficient and reduces operator fatigue. Designed for Metalworking and Versatile Use This Twist Drill is intended primarily as a Drill for Metal, suitable for cast iron, steels, aluminium and certain plastics. The geometry and material mean it also performs acceptably in mixed‑material workshops where quick tool changes and reliable centring are required. For cordless or portable applications, check shank compatibility on your Drilling Machine before use; if in doubt, METAV Werkzeuge offers expert guidance to select the right bit for the power tool. Standards, Dimensions and Practical Details Manufactured to DIN 338 for short twist drills with cylindrical shank, the bit measures 2 mm in diameter with a total length of 49 mm and a spiral (cutting) length of 24 mm. The provided shank execution information indicates the absence of a multi‑bevel W‑point and a triangular shank variant, so users should verify chuck compatibility on their equipment before use. These specifications support predictable performance in production and workshop settings where reproducible hole quality is required. We recommend the MetavCUT HSS‑G Twist Drill for precision metal drilling — for tailored technical advice or help choosing the right drill for your machine, contact METAV Werkzeuge: info@metav-werkzeuge.com • +49 2822 7131930 • WhatsApp +49 170 2837271 Bezeichnung: Twist Drill (Spiralbohrer) Marke: MetavCUT SKU: 55020-FDA Durchmesser: 2 mm Spitzenwinkel: 135° Material: HSS‑G Norm: DIN 338 Gesamtlänge: 49 mm Spirallänge: 24 mm Anwendung: Drill for Metal Für Bohrmaschine: Handbohrmaschine / Drilling Machine Schaft Ausführung: without multi-bevel cutting edge and trianglular shank Modellserie: Spezial Verpackungseinheit: 10 Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the Twist Drill used for and which materials does it suit? The MetavCUT Twist Drill is primarily a Drill for Metal and is used for machining alloyed and unalloyed steel, cast steel, cast iron, non‑ferrous metals and hard plastics; its geometry and HSS‑G material make it suitable for workshop and machine shop applications where clean, precise holes are required. Which three main drill types exist? Common drill categories are Metal drills, Wood drills and Stone/Concrete drills; the MetavCUT Twist Drill falls into the Metal drill category and is optimised for metalworking. Why are Twist Drills point‑sharpened? The tip sharpening reduces the cross‑cut at the drill tip, which lowers friction and therefore requires less feed force; the sharpened point of the MetavCUT Twist Drill also improves centring and reduces walking on the workpiece. Can a Twist Drill be used for wood? A Metal drill such as the MetavCUT Twist Drill can be used in Wood but will typically give poorer guidance and a less clean finish compared with dedicated wood drills; metal drills are easier to regrind and have less self‑feeding tendency. For which hole depths is the Twist Drill most commonly used? Twist Drills are typically used for drilling through solid material; for diameters up to around 20 mm and drilling depths up to approximately 100 mm, the Twist Drill is the most common tool for such operations. Is HSS or HSSE better? The widespread assumption that HSSE is universally superior to HSS is incorrect; the choice depends on working conditions and cost justification — evaluate whether the specific operating environment warrants the higher investment before choosing HSSE over HSS.
2mm HSS-G Twist Drill DIN 340 ,long, bright finished - MetavCUT
Nutzen Sie die Kombination aus HSS-G geschliffener Oberfläche und langer Ausführung für sicheres, tiefes Bohren in Stahl und Guss; die hohe Schneidschärfe reduziert Anpresskraft und beschleunigt den Arbeitsfluss. Bestellen Sie direkt bei Metav oder klären Sie technische Fragen per eMail oder Telefon. Spiralbohrer von MetavCUT – HSS-G, lange Ausführung Der Spiralbohrer ist ein geschliffener HSS-G Bohrer in langer Ausführung, entwickelt für tiefe und schwer zugängliche Bohrungen in Metall. Ideal für Handwerk und Werkstatt bei Stahl und Guss Geschliffene Spirale nach DIN 340 für präzise Bohrbilder Lange Ausführung: bessere Erreichbarkeit bei tiefen Bohrungen Material HSS-G: hohe Schnittgeschwindigkeit und Standzeit Verpackungseinheit 10 Stück für konstante Versorgung Präzise Schneidegeometrie für saubere Bohrlöcher Der Bohrer arbeitet mit einer geschliffenen Geometrie, die scharfe Schneiden und hohen Rundlauf gewährleistet. Durch den CNC-Schliff werden Spannuten exakt ausgeformt, was saubere Spanabfuhr und genauere Bohrbilder zur Folge hat. Der Einsatz von HSS-G sorgt für gute Wärmebeständigkeit und ermöglicht schnelleres Bohren bei reduziertem Kraftaufwand, was die Ergonomie bei Serienarbeiten verbessert. Lange Ausführung für tiefe und schwer zugängliche Bohrungen Die lange Ausführung macht das Werkzeug besonders geeignet, wenn die Bohrstelle weit innen liegt oder tiefe Sacklöcher gefertigt werden müssen. Die verlängerte Spirallänge unterstützt die Spanabfuhr über größere Tiefen und reduziert das Verhaken. Anwender profitieren von gesteigerter Reichweite ohne zusätzliche Verlängerungen, was Arbeitsabläufe in der Montage und Instandhaltung vereinfacht. Einsatzbereiche, Materialwahl und Anwendungsempfehlung Der Bohrer ist ausgelegt für legierten und unlegierten Stahl, Grauguss, Temperguss sowie Nichteisenmetalle. Für beste Ergebnisse empfiehlt sich die Nutzung mit Kühlschmierstoff und eine stationäre Aufnahme bei hohen Vorschubkräften, um Bruchrisiken zu minimieren. Für allgemeine Werkstattarbeiten in dünnen bis mittleren Blechen ist das Werkzeug ebenso geeignet wie für präzisere Montagearbeiten. Für wen dieses Werkzeug gemacht ist und praktische Hinweise Dieses Werkzeug richtet sich an Handwerk, Instandhaltung und produzierende Betriebe, die zuverlässige, wiederholgenaue Bohrungen benötigen. Vor dem Bohren ist ein Anpunkten mit einem Zentrierbohrer ratsam, um Wandern zu vermeiden; bei tiefen Löchern sollte die Bohrfolge bedacht gestaffelt werden. Die Standardausführung nach DIN 340 bietet eine bewährte Basis für vielseitige Anwendungen. Profitieren Sie von der Leistungsfähigkeit des HSS-G Spiralbohrers von MetavCUT aus der Standard Line und fordern Sie Muster oder technische Details direkt per eMail an: info@metav-werkzeuge.com oder telefonisch unter +49 2822 7131930 Produktmerkmale Artikelnummer: 53020-FDA Marke: MetavCUT Serie: Standard Line Bezeichnung: Spiralbohrer Fakten Durchmesser: 2 mm Gesamtlänge: 85 mm Spirallänge: 56 mm Spitzenwinkel: 118° Verpackungseinheit: 10 Besonderheiten Material: HSS-G (geschliffener Schnellarbeitsstahl) Schaftausführung: geschliffen Ausführung: lang Für Bohrmaschine: Handbohrmaschine Norm: DIN 340 Farbe: blank Modellserie: Standard Line FAQ Für welche Materialien ist dieser Spiralbohrer geeignet? Der MetavCUT Spiralbohrer aus der Standard Line mit Material HSS-G eignet sich für legierten und unlegierten Stahl, Grauguss, Temperguss sowie Nichteisenmetalle. Bei harten Werkstoffen empfiehlt sich Kühlung und angepasste Schnittgeschwindigkeit. Ist der Bohrer für Handgeführte Bohrmaschinen geeignet? Ja, der Spiralbohrer ist für Handbohrmaschine einsetzbar; bei hoher Belastung oder tieferen Bohrungen wird jedoch eine stationäre Aufnahme empfohlen, um Bruchrisiken des geschliffenen HSS-G Werkzeugs zu minimieren. Welche Vorteile bietet die lange Ausführung gegenüber Standardlänge? Die lange Ausführung der MetavCUT Spiralbohrer erlaubt das Erreichen tiefer oder schlecht zugänglicher Bohrstellen, verbessert die Spanabfuhr und reduziert den Bedarf an Verlängerungen bei Montagearbeiten. Wie viele Stück sind in einer Verpackungseinheit? Die Verpackungseinheit des MetavCUT Spiralbohrers (SKU 53020-FDA) enthält 10 Stück, was eine konstante Versorgung für Werkstatt und Montage sicherstellt. Wie groß ist der Spitzenwinkel und was bedeutet das für die Anwendung? Der Spiralbohrer hat einen Spitzenwinkel von 118°, der sich bewährt für allgemeine Metallbearbeitung und gutes Zentrierverhalten in üblichen Werkstoffen.
2mm Karrosseriebohrer, doppelseitig geschliffen schwarz ohne Fase, 38mm Gesamtlänge, Spirallänge 7,5mm, VE 10 - Metav IndustryLine
Karrosseriebohrer von Metav Werkzeuge — 2 mm, doppelseitig geschliffen, schwarz ohne Fase, Gesamtlänge 38 mm, Spirallänge 7,5 mm Der Karrosseriebohrer ist ein spezialisiertes Schneidwerkzeug für präzise Bohrungen in Karosserieblech und Montagearbeiten mit Akkubohrschrauber oder Säulenbohrmaschine. 2 mm Durchmesser für feine Bohrungen Doppelseitig geschliffen für hohe Standzeit Spirallänge 7,5 mm für sauberen Spantransport Geeignet für Karosserieblech, Aluminium und Kunststoffe Präzise Ergebnisse bei dünnen bis mittleren Blechen Mit einem Durchmesser von 2 mm und einer Spirallänge von 7,5 mm erzielt dieses Werkzeug gezielte, saubere Bohrungen in Karosserieblech und vergleichbaren Materialien. Die kompakte Gesamtlänge von 38 mm ermöglicht kontrolliertes Arbeiten auch an engen Stellen und in Blechteilen mit begrenzter Auflagefläche. Anwender profitieren von geringem Wanderverhalten bei korrektem Ansetzen, was die Nachbearbeitung reduziert und die Einbaulogistik im Montageprozess vereinfacht. Höhere Lebensdauer durch doppelseitigen Schliff Der doppelseitige, fein geschliffene Schneidrand sorgt für eine symmetrische Spanbildung und gleichmäßige Belastung beider Schneiden. Die Ausführung schwarz ohne Fase minimiert unerwünschte Reflexionen beim Ansetzen und trägt zu konstantem Kontakt beim Erstkontakt bei. In der Praxis bedeutet das längere Standzeit und weniger Werkzeugwechsel in der Werkstatt, was die Effizienz bei Serien- oder Einzelarbeiten erhöht. Vielseitige Einsatzmöglichkeiten und klare Grenzen Dieses Werkzeug ist besonders geeignet für Werkstatt, Montage und DIY-Anwendungen; ideal für dünne bis mittlere Stähle, Aluminium und gängige Kunststoffe. Als Vertreter des Standard-Bereichs empfiehlt sich der Einsatz mit handgeführten Akkubohrschraubern oder stationären Bohrmaschinen. Für hochpräzise Passungen empfiehlt sich zusätzliches Zentrieren mit einem Zentrierbohrer oder das Anpunkten; bei sehr tiefen Löchern empfiehlt sich mehrstufiges Aufbohren, da die Spannableitung sonst eingeschränkt sein kann. Anwendungshinweise, Pflege und Beratung Für beste Ergebnisse mit kleinen Durchmessern werden hohe Drehzahlen und moderater Vorschub empfohlen; starker Vorschub erhöht die Wärmeentwicklung und kann die Schneidkante vorzeitig abstumpfen. Regelmäßiges Entfernen von Spänen, gegebenenfalls Einsatz von Kühlschmierstoff bei zähen Materialien, und sachgerechtes Einspannen erhöhen die Lebensdauer des Werkzeugs. Bei Unsicherheit, ob dieser Karrosseriebohrer Ihre Anforderungen erfüllt, bietet Metav Werkzeuge kompetente Beratung per eMail oder Telefon an. Empfehlung: Den Metav Karrosseriebohrer 2 mm für präzise Karosserie- und Montagearbeiten verwenden; bei Fragen zur Anwendung oder zur Auswahl des passenden Schneidwerkzeugs kontaktieren Sie Metav Werkzeuge per eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 Technische Informationen und Spezifikationen Bezeichnung: Karrosseriebohrer Marke/Hersteller: Metav Werkzeuge SKU: 59020-FDA GTIN: 4041957590202 Produkttyp: SINGLE Durchmesser: 2 mm Gesamtlänge: 38 mm Spirallänge: 7,5 mm Ausführung: doppelseitig, geschliffen, schwarz ohne Fase Verpackungseinheit: 10 Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ Für welche Materialien ist der Karrosseriebohrer von Metav Werkzeuge geeignet? Der Karrosseriebohrer von Metav Werkzeuge eignet sich primär für Karosserieblech, Aluminium und übliche Kunststoffe; diese Kombination aus Durchmesser und Spirallänge unterstützt sauberen Spanabtransport bei dünnen bis mittleren Werkstückstärken. Kann der Karrosseriebohrer von Metav Werkzeuge in einem Akkubohrschrauber verwendet werden? Ja, der Karrosseriebohrer wurde für den Einsatz mit handgeführten Akkubohrschraubern und stationären Bohrmaschinen im Standard-Bereich konzipiert; bei hoher Präzision empfiehlt Metav Werkzeuge zusätzliches Zentrieren. Wie verlängere ich die Standzeit des Karrosseriebohrers von Metav Werkzeuge? Regelmäßiges Entfernen von Spänen, moderater Vorschub, hohe Drehzahl bei diesem Durchmesser und gegebenenfalls Kühlschmierstoff bei zähen Materialien tragen zur Verlängerung der Standzeit des Karrosseriebohrers bei. Was ist zu beachten, wenn sehr tiefe Löcher gebohrt werden sollen? Für sehr tiefe Bohrungen empfiehlt Metav Werkzeuge mehrstufiges Aufbohren oder speziell dafür ausgelegte Werkzeuge; der angebotene Karrosseriebohrer ist für kurze bis mittlere Bohrtiefen im Standard-Einsatz optimiert. {"@context":"https://schema.org","@graph":[{"@type":"Product","@id":"#59020-FDA","sku":"59020-FDA","mpn":"59020-FDA","gtin13":"4041957590202","name":"Karrosseriebohrer 59020-FDA","description":"Karrosseriebohrer, 2 mm Durchmesser, doppelseitig geschliffen, schwarz ohne Fase, Gesamtlänge 38 mm, Spirallänge 7,5 mm; Spezialwerkzeug für präzise Bohrungen in Karosserieblech, Aluminium und Kunststoffe; geeignet für Akkubohrschrauber und Säulenbohrmaschinen.","image":["https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741b/logo-metav-1200-1200.png","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741e/logo-metav-1200-900.png","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png"],"additionalProperty":[{"@type":"PropertyValue","name":"Bezeichnung","value":"Karrosseriebohrer"},{"@type":"PropertyValue","name":"Durchmesser","value":"2 mm"},{"@type":"PropertyValue","name":"Spirallänge","value":"7,5 mm"},{"@type":"PropertyValue","name":"Gesamtlänge","value":"38 mm"},{"@type":"PropertyValue","name":"Ausführung","value":"doppelseitig, geschliffen, schwarz ohne Fase"},{"@type":"PropertyValue","name":"Produkttyp","value":"SINGLE"},{"@type":"PropertyValue","name":"Verpackungseinheit","value":"10"},{"@type":"PropertyValue","name":"Material","value":"geeignet für Karosserieblech, Aluminium, Kunststoffe"}]},{"@type":"FAQPage","mainEntity":[{"@type":"Question","name":"Für welche Materialien ist der Karrosseriebohrer geeignet?","acceptedAnswer":{"@type":"Answer","text":"Der Karrosseriebohrer von Metav Werkzeuge eignet sich für Karrosserieblech, Aluminium und übliche Kunststoffe; Durchmesser 2 mm und Spirallänge 7,5 mm unterstützen sauberen Spanabtransport bei dünnen bis mittleren Werkstückstärken."}},{"@type":"Question","name":"Kann der Karrosseriebohrer in einem Akkubohrschrauber verwendet werden?","acceptedAnswer":{"@type":"Answer","text":"Ja, der Karrosseriebohrer von Metav Werkzeuge wurde für den Einsatz mit handgeführten Akkubohrschraubern und stationären Bohrmaschinen konzipiert; bei hoher Präzision empfiehlt Metav Werkzeuge zusätzliches Zentrieren."}},{"@type":"Question","name":"Wie verlängere ich die Standzeit des Karrosseriebohrers?","acceptedAnswer":{"@type":"Answer","text":"Regelmäßiges Entfernen von Spänen, moderater Vorschub, hohe Drehzahl bei diesem Durchmesser und gegebenenfalls Einsatz von Kühlschmierstoff bei zähen Materialien verlängern die Standzeit des Karrosseriebohrers von Metav Werkzeuge."}},{"@type":"Question","name":"Was ist zu beachten bei sehr tiefen Löchern?","acceptedAnswer":{"@type":"Answer","text":"Für sehr tiefe Bohrungen empfiehlt Metav Werkzeuge mehrstufiges Aufbohren oder speziell dafür ausgelegte Werkzeuge; der Karrosseriebohrer ist für kurze bis mittlere Bohrtiefen im Standard-Einsatz optimiert."}}]},{"@type":"ItemPage","url":"https://metav-shop.de/produkt/59020-FDA","dateModified":"2026-05-04T12:00:00+01:00","author":{"@type":"Person","name":"Stephan Bayer","url":"https://www.linkedin.com/in/stephan-bayer/"},"publisher":{"@type":"Organization","name":"Metav Werkzeuge GmbH","url":"https://metav-shop.de","logo":{"@type":"ImageObject","url":"https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png","width":1200,"height":675},"address":{"@type":"PostalAddress","streetAddress":"Parkring 45","postalCode":"46446","addressLocality":"Emmerich","addressCountry":"DE"},"telephone":"+49 2822 7131930","email":"info@metav-werkzeuge.com"},"about":[{"@type":"Thing","name":"Karrosseriebohrer Serie"},{"@type":"Thing","name":"Standard-Bereich Bohrer 2 mm"},{"@type":"Thing","name":"Einsatz: Werkstatt und Montage"}],"mentions":[{"@type":"Thing","name":"Spirallänge 7,5 mm"},{"@type":"Thing","name":"Ausführung doppelseitig geschliffen"},{"@type":"Thing","name":"Schwarz ohne Fase"}]}]}
High-performance drill bits for demanding production
Drill bits designed for industrial manufacturing where precision, repeatability and tool life are decisive. Based on a spectrum from HSS and kobalt-alloyed hss-e for universal use to solid carbide drills for high-speed, high-precision serial production, this range covers applications from general engineering to automotive supplier work.
Why these drill bits are essential in the workshop and on the machining centre
Function and behaviour:
- primary use: creating accurate cylindrical holes
- typical machines: CNC machining centres, lathes and drill presses
- key design aspects: optimised chisel edge, defined point angles, flute geometry for reliable chip evacuation
Technical advantages and process benefits:
- reduced feed forces through optimised point geometry
- improved heat control with advanced coatings and, where specified, internal coolant supply
- extended tool life using solid carbide variants and multilayer coatings such as TiN / TiAlN
- process security on challenging materials thanks to tailored materials and geometries
Concrete benefits that boost productivity and quality
- predictable tool life and fewer tool changes, lowering machine downtime
- stable hole quality and consistent tolerances across long runs
- efficient chip control and thermal management for safe deep-hole and hardened-material drilling
- suitability across a wide material range, reducing the need for multiple specialised tools
Metav as a reliable partner for high-precision tooling
Metav combines decades of sector expertise with a broad, dependable offering from its Emmerich facility. With over 48,000 customers and more than 250,000 products, Metav positions its range of drill bits, twist drills and indexable drills as a practical, quality-first choice for procurement managers and production engineers seeking dependable supply and technical competence.
Technical data (at a glance)
- material: HSS, kobalt-alloyed hss-e, solid carbide
- coatings: TiN, TiAlN, advanced nanocoatings
- coolant option: internal coolant feed where specified
- typical applications: mild steel, high-alloy stainless steel, cast iron, non-ferrous metals, technical plastics, hardened materials (use solid carbide variants)
- tool types available: twist drills, solid carbide drills, indexable drills, centre and pilot drills, step drills
FAQ
What is the difference between hss and solid carbide drill bits?
HSS drill bits offer toughness and resistance to breakage for general machining, while solid carbide drills provide higher wear resistance and are the preferred choice for high-speed, high-volume machining and hardened materials.
Which coatings improve tool life for industrial drilling?
Coatings such as TiN and TiAlN increase surface hardness and thermal stability; when combined with the correct drill geometry and, if available, internal coolant, they significantly extend the service life of drill bits.
Can these drill bits be used on CNC machining centres for deep holes?
Yes. Drill bits designed with optimised flute geometry and internal coolant supply are suited to deep-hole machining on CNC machining centres, ensuring controlled chip evacuation and heat management.
How should I choose between twist drills, solid carbide drills and indexable drills?
Select twist drills for general-purpose drilling, solid carbide drills for high-speed and hardened-material applications, and indexable drills for large-diameter holes where insert changes offer economic advantages.
Why choose Metav for drill bits and drilling solutions?
Metav offers a comprehensive selection of drill bits, twist drills and indexable drills combined with sector expertise, centralised supply from Emmerich and proven reliability across thousands of industrial customers.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com