High-precision drills for reliable, high-throughput metalworking
Drills provide the fundamental rotating cutting solution for producing accurate cylindrical holes in materials such as structural steel, high-alloy stainless steel, cast iron, non-ferrous metals and engineering plastics, delivering consistent hole quality and extended tool life in CNC machining and turning centres. This category covers everything from classic twist drill made from high-speed steel for general machining to solid carbide drill optimised for high cutting speeds and long run times, offering advanced coatings and internal coolant options for improved heat management. By using optimised point geometries and split points the tools reduce thrust, prevent walking at the start of the cut and ensure superior surface finish, which benefits sectors from general mechanical engineering to automotive component manufacture.
3.00mm Twin-Ended HSS Body Drill Short Spiral Cross-Cut Cylindrical Shank, Ground Profile - TECWERK
Take advantage of the combination of durable HSS construction, a cross-ground tip and a short spiral for fast, clean holes in thin sheet metal; order the double-ended drill bit directly via Metav Werkzeuge or ask our consultants if needed. Double-ended drill bit D 3 mm HSS — cross-ground tip, short spiral (TECWERK) Double-ended drill bit D 3 mm HSS designed for efficient drilling of thin materials and bodywork applications with hand drills. Double-ended for quick tool changes Cross-ground tip for clean entry Short spiral suited to thin sheet metal Cylindrical shank, 3 mm diameter Precision and productivity for sheet-metal operations The double-ended design delivers immediate backup for reduced downtime: when one cutting end wears, the opposite end is ready for continued use. Made from HSS, the bit provides a reliable hardness and toughness balance that supports repeated drilling cycles in light-duty production. The 3 mm diameter and short spiral restrict chip build-up in thin materials, resulting in more consistent hole quality compared with long-flute bits. Clean entry and stable cutting performance A cross-ground tip ensures precise centring and lower thrust force at the start of the cut, which is particularly advantageous when working with thin or flexible panels. The right-hand cutting geometry and profile-ground flutes enable smooth chip evacuation over the short 9.5 mm flute length, reducing the risk of tearing or distortion in the workpiece. This combination translates into faster cycle times and fewer reworks in series and repair tasks. Practical handling and compatibility with hand tools The bit is supplied with a cylindrical shank matching the 3 mm shank diameter, making it compatible with standard chucks on hand-held drills. The bright, uncoated finish provides visible wear cues for timely replacement, while the double-ended layout minimises inventory requirements for small workshops. Best suited for sheet-metal and thin-material drilling, the tool is optimised for manual operations and small-scale industrial use. Supply reliability and workshop integration Packaged in units of 10, the items support predictable replenishment for maintenance and repair workshops. The overall length of 46 mm balances reach and rigidity, avoiding excessive flex during handheld drilling. Sourced from TECWERK and distributed through Metav’s European supply channel, the product fits into a streamlined procurement process that prioritises availability and consistent quality. For ordering or technical clarification, contact Metav Werkzeuge with reference 2000860129NW at info@metav-werkzeuge.com or call +49 2822 7131930 to secure swift supply from Emmerich. Technical data Article number: 2000860129NW Brand: TECWERK Product type: Double-ended drill bit Material: HSS Diameter: 3.00 mm Facts Overall length: 46 mm Spiral length: 9.50 mm Shank diameter: 3 mm Packaging unit: 10 Special features Profile-ground Cross-ground tip Short spiral Bright/uncoated finish Cylindrical shank Right-hand cutting Best suited for thin materials and sheet-metal with hand drills FAQ What materials is this drill bit suitable for? The TECWERK double-ended drill bit is specified for drilling thin materials and sheet metal and is designed primarily for hand-drill operations. How does the double-ended design benefit workshop routines? A double-ended layout halves the effective tool change intervals: when one end shows wear, the opposite end can be used immediately, extending usable life per item and simplifying small-batch stocks. Is the shank compatible with standard hand drills? Yes, the cylindrical shank with a 3 mm diameter fits standard drill chucks commonly used in workshop and repair environments. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
3.10mm Double-Ended Body Drill HSS Profile-Ground Short Spiral Cross Point Right-Hand Cylindrical Shank - TECWERK
Take advantage of a cost-effective, durable drill solution that combines HSS strength with a profile-ground geometry for consistent hole quality in thin materials; order through Metav Werkzeuge or consult the team for application advice. Double-ended bodywork drill D.3.10 mm HSS (TECWERK) — profile-ground, short spiral for sheet-metal work Double-ended bodywork drill D.3.10 mm HSS — a compact drill designed for clean, fast holes in thin panels and general sheet-metal applications with hand-held or bench-mounted drills HSS material for durable cutting Profile-ground with cross grind Short spiral for thin sheets Cylindrical shank, 3.10 mm dia Faster, cleaner holes in thin sheet materials With a HSS cutting edge and a profile-ground point, this double-ended bodywork drill delivers reliable chip formation and reduced burr on thin panels. The cross grind enhances centring and minimises walking when starting holes in sheets, so hole position is preserved without time-consuming pilot steps. Short spiral geometry ensures rapid evacuation of short chips typical for thin materials, resulting in shorter cycle times and improved hole finish for fabrication and repair tasks. Compact geometry built for portable and workshop drilling The drill’s overall length of 49 mm and a spiral length of 9.50 mm make it especially suitable for use with hand-held drills and light-duty machines where accessibility and manoeuvrability matter. The cylindrical shank with a 3.10 mm diameter fits common chucks without special adaptors, enabling straightforward tool changes and minimal setup. Right-hand cutting direction supports standard rotation conventions and consistent cutting behaviour across equipment fleets. Robust design that keeps production moving Manufactured in HSS and finished bright, the tool combines wear resistance with a geometry that resists chipping during common sheet-metal operations. The double-ended concept offers practical redundancy: when one end wears, the second tip remains available, extending effective tool life in busy workshops. This configuration reduces downtime for replacement and supports steady throughput in light assembly, bodyshop repair, and maintenance contexts. Application clarity and practical benefits Intended primarily for drilling thin materials and sheet metal, the drill’s short flute and point design reduce material distortion and heat build-up, preserving part integrity. Its simple, proven format suits straightforward maintenance routines in industrial and craft settings: predictable behaviour, easy storage, and uncomplicated replacement. For tasks requiring fast, repeatable holes in thin stock, the tool provides an economical mix of precision and durability without complex tooling requirements. For reliable sheet-metal drilling with TECWERK quality, contact Metav Werkzeuge in Emmerich for tailored advice or to order the D.3.10 mm HSS double-ended drills — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: 2000860130NW Product: Double-ended bodywork drill Manufacturer: TECWERK Facts Diameter: 3.10 mm Overall length: 49 mm Spiral length: 9.50 mm Shank diameter: 3.10 mm Special features Material: HSS Profile-ground point Cross grind Short spiral design Cylindrical shank Right-hand cutting Bright (uncoated) finish Suitable for thin materials and sheet-metal drilling FAQ What materials is this drill suitable for? This double-ended bodywork drill (TECWERK) is designed primarily for thin materials and sheet metal, as indicated by its short spiral and profile-ground point. Can the D.3.10 mm HSS drill be used in hand-held drills? Yes, the 3.10 mm cylindrical shank and compact 49 mm overall length make the TECWERK double-ended drill compatible with standard hand-held chucks and light-duty workshop machines. How does the cross grind affect drilling performance? The cross grind improves centring and reduces walking at hole entry, so the TECWERK bodywork drill produces cleaner starts and more accurate hole placement in thin panels. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
3.15mm Centre Drill DIN 333 Form A 60° HSS Left-Hand Cut, 8mm Shank - TECWERK
Combine the robust HSS construction with a 60° Form A tip to create reliable centre holes to DIN 332; the compact design and left-hand cutting make the tool especially suited to repetitive workshop use. Order or enquire via Metav Werkzeuge for secure supply and technical guidance. TECWERK centre drill DIN 333 Form A Ø 3.15 mm HSS left-hand cut — 60° centring tip A TECWERK centre drill (DIN 333, Form A, Ø 3.15 mm, HSS, left-hand cut) engineered for precise centre-hole production in general workshop and light industrial applications. HSS construction for durability and sharpness DIN 333 Form A geometry, 60° centring tip Left-hand cutting for chip evacuation and reaming Feed in steel up to 800 N: 0.03 mm/rev Accurate starts for turning and drilling setups The Form A geometry with a 60° tip ensures that centre holes are formed consistently to the relevant standard, allowing reliable chucking and reduced run-out in subsequent turning operations. Made from HSS, the tool retains cutting edge integrity during repeated use and resharpening cycles. The nominal diameter of 3.15 mm produces compact, precise centres suitable for small to medium workpieces; the controlled geometry reduces the need for corrective finishing and supports predictable positioning on the lathe or drilling machine. Built for dependable workshop performance A sturdy 8 mm shank and an overall length of 50 mm provide rigidity and ease of handling in standard collets and three-jaw chucks. The left-hand cut assists chip control in specific machining sequences, and the specified feed of 0.03 mm/rev in steel up to 800 N gives a reliable starting parameter for process planning. Because the material is HSS, the tool offers a balance between toughness and hardness, making it suitable for everyday centring tasks without fragile performance under moderate loads. Seamless integration into production routines The DIN-compliant design simplifies tool selection and inventory management across multiple workstations; compatibility with common holders and quick-change systems shortens setup time. As the tool is intended for general use, it adapts well to a range of ferrous materials when used with the recommended feed. Clear technical parameters enable straightforward process documentation and repeatability, which supports quality control procedures and reduces scrap due to incorrect centring. Suitable choice for precision-minded workshops For professional workshops aiming to democratise precision without compromise, this centre drill delivers dependable centring, straightforward resharpening and consistent results across batches. The compact geometry and proven material choice reduce downtime and maintain dimensional accuracy for subsequent operations, offering a practical balance of performance and economy for day-to-day metrology and turning preparations. Contact Metav Werkzeuge to confirm availability of the TECWERK centre drill and to discuss application details — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 2000861573NW Product type: Centre drill Brand: TECWERK Material: HSS Facts Nominal diameter: 3.15 mm Shank diameter: 8 mm Overall length: 50 mm Tip angle: 60° Feed in steel up to 800 N: 0.03 mm/rev Cutting direction: Left-hand cutting Norm: DIN 333 Form: A Packaging unit: 5 Special features DIN 333 Form A geometry For centre holes to DIN 332 without countersink General workshop use Left-hand cutting for chip control Suitable for resharpening FAQ What materials is this centre drill suitable for? The TECWERK centre drill DIN 333 Form A Ø 3.15 mm (SKU 2000861573NW) is designed for general workshop use and is specified with a feed rate for steel up to 800 N; HSS construction supports a range of common ferrous materials. How does the 60° tip affect centring? A 60° centring tip produces standard centre holes per DIN 332, ensuring correct seating for live centres and tailstocks and improving concentricity in subsequent turning operations when using the TECWERK centre drill. Why choose a left-hand cut on a centre drill? Left-hand cutting aids chip flow in specific setups and can assist safe chip evacuation during interrupted cuts; the left-hand configuration is incorporated into this centre drill to suit varied machining strategies. Can the centre drill be resharpened? Yes, the HSS material and classic Form A geometry allow for resharpening; the tool is designed for workshop maintenance to extend service life and maintain precision. Is this tool compatible with standard collets and chucks? The 8 mm shank and 50 mm overall length make the centre drill compatible with common collets and three-jaw chucks, enabling straightforward integration into existing tool holdings. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
3.15mm Centre Drill DIN 333 Form A 60° HSS Right-Hand Shank 8mm, Pack of 5 - TECWERK
Take advantage of the combination of HSS durability, DIN 333 Form A geometry and a compact 50 mm overall length for fast, accurate preparation of centre holes; order the centre drill directly via Metav Werkzeuge or consult our advisors for application support. Centre drill DIN 333 Form A 3.15 mm HSS by TECWERK — 60° countersink angle, 50 mm overall length A Centre drill DIN 333 Form A 3.15 mm HSS designed for accurate centre-hole formation and reliable pilot guidance in general workshop and production settings HSS construction for extended tool life DIN 333 Form A for standardised centring 60° countersink angle for precise alignment 8 mm shank for stable clamping Precision centring that reduces rework and runout The combination of DIN 333 Form A geometry and HSS material provides a robust solution for producing accurate centre holes prior to drilling. The integrated 60° countersink angle ensures exact axial positioning, which reduces drill wander and subsequent rework. With a nominal diameter of 3.15 mm and an overall length of 50 mm, this centre tool offers a compact footprint while maintaining the rigidity needed for consistent centring operations. Geometry tuned for efficient machining and chip control A short piloted profile and right‑hand cutting direction enable reliable engagement and predictable chip formation during the initial operation. The tool’s geometry is optimised for quick entry and stable cutting, supporting a recommended feed of 0.03 mm/rev in steel up to 800 N. These parameters help to shorten cycle times and improve first-pass accuracy when preparing components for further machining. Easy integration with common workshop equipment The 8 mm shank is suitable for most standard chucks and collet systems, ensuring straightforward tool changes and secure clamping. Conformity to DIN 333 means compatibility with established centring procedures and fixtures, so integration into existing workflows is seamless. As a general‑purpose centre drill, it works well in maintenance, prototyping and production environments where reliable centring is a routine requirement. Supply reliability and expert support for industrial use Sourced from TECWERK and available through Metav Werkzeuge, this centre drill benefits from a supply chain geared towards industry: stock held in Emmerich, technical competence and a broad range of workshop consumables. Metav’s approach to precision democratisation offers access to a wide product range, consistent quality controls and transparent order handling, supporting steady production without surprise shortages. Contact Metav Werkzeuge for availability, technical guidance and to request stock information for TECWERK centre drills with SKU 2000861807NW Technical data Article number: 2000861807NW Label: Zentrierbohrer DIN 333 Form A D.3,15mm HSS re.TECWERK Facts Nominal diameter: 3.15 mm Overall length: 50 mm Shank diameter: 8 mm Countersink angle: 60° Standard: DIN 333 (Form A) Material: HSS Cutting direction: right‑hand Feed in steel ≤ 800 N: 0.03 mm/rev Packaging unit: 5 Special features For producing centre holes to DIN 332 without spotting General workshop and production use Short piloted design for accurate positioning Suitable for standard chucks and collets FAQ What is the primary purpose of this centre drill? The TECWERK centre drill DIN 333 Form A 3.15 mm HSS (SKU 2000861807NW) is intended to produce accurate centre holes and pilot starts for subsequent drilling operations. Which shank size is required for mounting? A shank diameter of 8 mm is specified; the tool fits standard chucks and collets that accept an 8 mm shank for secure clamping. What cutting parameters are recommended for steel? A feed of 0.03 mm/rev is recommended when machining steel with tensile strength up to 800 N, as stated for this centre drill. Does the tool conform to industry standards? Yes, the geometry complies with DIN 333 Form A, ensuring standardised centring behaviour and compatibility with established procedures. Is this centre drill suited to production and maintenance environments? The compact overall length of 50 mm, HSS construction and standard shank make it suitable for both production and workshop maintenance applications. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
3.15mm Centre Drill DIN 333 Form A 60° HSS-Co, Right-Hand Cutting - TECWERK
Take advantage of a durable HSS‑Co construction and classic DIN 333 Form A geometry for reliable centring in demanding production environments; order via Metav Werkzeuge or contact our consultants for application advice. Centre drill DIN 333 Form A 3.15 mm (HSS‑Co) by TECWERK — 60° tip, 8 mm shank A centre drill DIN 333 Form A 3.15 mm HSS‑Co designed to produce accurate centre holes for machining and turning, especially in high‑strength and corrosion‑resistant steels HSS‑Co construction for high wear resistance DIN 333 Form A geometry for precise centring 60° tip angle for standard centre holes 8 mm shank, Ø 3.15 mm, overall length 50 mm Durable alloy for high‑strength machining Manufactured from HSS‑Co, this centre drill is engineered for components with elevated strength requirements. The cobalt‑alloy composition increases red hardness and wear resistance, which supports continuous operation under higher temperatures and tougher cutting conditions. Designed for materials exceeding 800 N/mm² and CrNi (stainless) steels, the tool offers a consistent cutting performance where standard high‑speed cutters might accelerate wear. The specification also cites a recommended feed of 0.03 mm/rev for steels up to 800 N/mm², allowing purchasers to plan machining parameters with predictable tool life. Geometry that ensures repeatable, conforming centre holes The DIN 333 Form A profile and 60° tip produce centre holes compliant with DIN 332 standards without a protective countersink, giving a clean, concentric start for subsequent turning or drilling operations. The short, rigid point inherent to Form A minimises deflection and chatter, resulting in precise centre holes and reduced rework. With an 8 mm shank and a nominal diameter of 3.15 mm, the design suits common collet and chuck systems and supports safe, repeatable seating of workpieces on centres. Production‑ready handling and workshop benefits Right‑hand cutting and a 50 mm overall length make the tool straightforward to integrate into standard drill holders and tool changers. Packaged in sets of five, the item supports small batch replenishment and shop‑floor availability. The combination of standardised DIN geometry and robust material choice delivers a low‑risk option for purchasing managers seeking durable, easy‑specified centring tools that reduce downtime and maintain process stability in serial production. For assured centring performance in high‑strength and stainless steels, contact Metav Werkzeuge for stock information and technical guidance on the TECWERK centre drill (SKU 2000861582NW) Technical data Article number: 2000861582NW Product type: Centre drill Manufacturer: TECWERK Standard: DIN 333 Form: A Material: HSS‑Co Design: without protective countersink Core specifications Diameter: 3.15 mm Shank diameter: 8 mm Overall length: 50 mm Tip/countersink angle: 60° Cutting direction: Right‑hand cutting Recommended feed in steel (≤ 800 N/mm²): 0.03 mm/rev Packaging unit: 5 Applications / special features For production of centre holes according to DIN 332 without protective countersink Suitable for materials > 800 N/mm² and for corrosion‑, acid‑ and heat‑resistant CrNi steels DIN 333 Form A geometry for rigid, repeatable centring Right‑hand cutting for standard machining set‑ups FAQ What materials can this centre drill machine? The TECWERK centre drill (centre drill DIN 333 Form A 3.15 mm HSS‑Co, SKU 2000861582NW) is specified for materials with tensile strengths above 800 N/mm² and for corrosion‑resistant CrNi (stainless) steels. Is the tip angle suitable for standard lathe centres? Yes. The 60° tip conforms to common centre geometry and is intended to produce centre holes that match DIN 332 requirements for turning and supporting workpieces. What is the recommended feed rate when drilling steel? A recommended feed of 0.03 mm/rev is indicated for steel up to 800 N/mm²; this offers a balance between tool life and machining efficiency for the specified materials. Which holders or collets are compatible with the shank? The tool’s 8 mm shank is compatible with standard 8 mm collets and drill holders; confirm holder clamping tolerances on the machine side before mounting. How is the tool supplied and arranged for stock control? The item is supplied in a packaging unit of 5, facilitating straightforward inventory management for production and maintenance planning. Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund
3.15mm Centre Drill DIN 333 Form A 60° Tip Solid Carbide Right-Hand, For High-Strength Steels - TECWERK
Achieve reliable pilot holes with solid carbide construction and DIN 333 Form A geometry; the 60° countersink ensures repeatable centres in challenging materials while the compact shank simplifies toolholding. Order the centre drill directly via Metav Werkzeuge or ask the consultants if additional technical details are required. TECWERK Centre Drill DIN 333 Form A – 3.15 mm, Solid Carbide, 60° The centre drill DIN 333 Form A is a short, rigid centring tool designed to create precise pilot centres for turning and drilling operations across a wide range of engineering materials. *Solid carbide construction for long life *DIN 333 Form A centring geometry *60° countersink angle for standard centring *Right‑hand cutting for conventional machining Precision centring for consistent pilot holes The combination of DIN 333 Form A geometry and a 60° countersink angle delivers consistently accurate pilot holes that reduce runout at subsequent drilling or turning operations. The short, rigid design concentrates cutting forces at the tip, improving concentricity and repeatability in serial production. As a result, process stability is increased and the risk of rework is minimised, which supports dependable cycle times on both manual and CNC machines. Engineered for tough materials and extended tool life Manufactured from solid carbide, this centring tool offers high wear resistance and thermal stability, making it suitable for machining high‑strength steels, various cast irons and many non‑ferrous alloys. The right‑hand cutting orientation ensures conventional chip flow and predictable performance in standard machining setups. By choosing a carbide centring drill, tool change frequency is reduced and cutting-edge integrity is maintained under higher cutting loads, supporting uninterrupted workshop throughput. Compact dimensions for seamless integration into production With a diameter of 3.15 mm, shank 8 mm and an overall length of 50 mm, the tool fits common collets and chucks without the need for special adaptors. The design is supplied without protective countersink, keeping the tool true to Form A specification and suitable for producing centre holes to DIN 332. Recommended operating data includes a feed of 0.1 mm/rev in steel up to 800 N, which balances cutting engagement and tool life for repeatable results across batches. Contact Metav Werkzeuge today for availability and technical advice on the TECWERK centre drill 3.15 mm and to arrange prompt supply from Emmerich. Technical data Article number: 2000861993NW Product type: Centre drill Brand: TECWERK Form: A Facts Diameter: 3.15 mm Overall length: 50 mm Shank diameter: 8 mm Countersink angle: 60° Feed in steel up to 800 N: 0.1 mm/rev Cutting direction: right‑hand Special features Material: solid carbide Standard: DIN 333 For producing centre holes to DIN 332 Supplied without protective countersink Applications: high‑strength steels, steel castings, grey cast iron, hard cast iron, manganese‑hard steel, CrNi steels, light and non‑ferrous metals, fibre‑reinforced plastics and other thermosets FAQ Which materials can be machined with this centre drill? The TECWERK centre drill DIN 333 Form A 3.15 mm is specified for high‑strength steels, steel castings, grey and hard cast irons, manganese‑hard steel, CrNi steels, light and non‑ferrous metals, and fibre‑reinforced plastics as stated in the product data. What feed and cutting direction are recommended? A feed of 0.1 mm/rev in steel up to 800 N is indicated for stable machining; the tool is right‑hand cutting, suitable for conventional spindle rotation and standard toolholders. Will the tool fit common chucks and collets? Yes. The 8 mm shank and 50 mm overall length make the centring drill compatible with typical 8 mm collets and drill chucks used in workshops and small production cells. What does “Form A without protective countersink” mean for the workshop? Form A denotes a short, rigid centre drill profile intended for accurate centre holes; “without protective countersink” means the tip is supplied in the standard Form A geometry without an added protective chamfer, ensuring true centring for machining to DIN 332. Which standards apply to this centring tool and how is it identified? The tool conforms to DIN 333 (Form A) and is intended for producing centre holes per DIN 332; identification is by SKU 2000861993NW and the TECWERK brand. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund
3.15mm Centre Drill DIN 333 Form B With Countersink 60/120° HSS, Right-Hand Cutting - TECWERK
Combining HSS durability, DIN 333 Form B conformity and a protective countersink, this centre drill delivers accurate, repeatable centring for workshop and production use; order the TECWERK tool directly via Metav Werkzeuge or contact our consultants for technical guidance. TECWERK centre drill DIN 333 Form B, Ø 3.15 mm, HSS with protective countersink TECWERK centre drill DIN 333 Form B, Ø 3.15 mm, HSS with protective countersink is a purpose-built centring tool for creating standard centre holes before turning or drilling operations HSS construction for durable cutting DIN 333 Form B for standard centre holes Protective countersink for reliable centring Right‑hand cutting, Ø 3.15 mm, 60/120° angle Accurate starts reduce rework and machine time The primary advantage of a dedicated centre drill lies in consistent, vibration‑free starts that prevent tool walking and misalignment. Manufactured to DIN 333 and matched to centre‑hole requirements in DIN 332 Blatt 1 Form B, this HSS tool produces repeatable pilot seats for subsequent drills or lathe centres. The combination of 3.15 mm tip diameter and a 60/120° countersink angle ensures a defined contact point, while the right‑hand cutting geometry supports smooth engagement at the start of the cut. These characteristics translate directly into reduced setup time and fewer scrapped components. Robust construction for dependable workshop performance Built from HSS, the drill balances toughness and wear resistance for general workshop environments. The tool’s protective countersink limits burr formation and protects the pilot during handling, preserving the cutting edges and extending service intervals. With an overall length of 60 mm and a shank diameter of 11.2 mm, the tool seats securely in standard chucks and holders, improving concentricity. For steel applications up to 800 N the recommended feed is 0.03 mm/rev, which optimises the cutting conditions and contributes to long‑term tool life. Easy integration into standard production workflows Adopting a standard‑compliant centre drill simplifies process planning: the geometry is compatible with common turning and drilling routines, and repeatable centring reduces setup checks. The right‑hand cutting direction and familiar dimensions make the tool suitable for tool cabinets across production and maintenance shops, supporting efficient batching and rapid changeovers. The clear technical specification and industry standard form factor help with procurement planning and inventory coherence, reinforcing stable supply chains when sourced via Metav Werkzeuge. For reliable centring and consistent workshop results, secure the TECWERK centre drill through Metav Werkzeuge — available from Emmerich with expert consultancy and dependable delivery Technical data Article number: 2000861633NW Product type: Centre drill Manufacturer: TECWERK Label: Zentrierbohrer DIN 333 Form B D.3,15mm HSS m.Schutzsenkung re.TECWERK Facts Diameter: 3.15 mm Overall length: 60 mm Shank diameter: 11.2 mm Countersink angle: 60/120° Feed in steel ≤ 800 N: 0.03 mm/rev Cutting direction: Right‑hand Special features Material: HSS Form: B Standard: DIN 333 With protective countersink For making centre holes to DIN 332 Blatt 1 Form B Packaging unit: 1 FAQ What material is the centre drill made from? The TECWERK centre drill (DIN 333 Form B, SKU 2000861633NW) is manufactured from HSS, chosen for its combination of toughness and wear resistance. Which dimensions and angles does this tool have? This centre drill has a 3.15 mm tip diameter, an overall length of 60 mm, a shank of 11.2 mm and a countersink angle of 60/120°, matching DIN specifications. Is the tool suitable for workshop steel applications? Yes, the TECWERK centre drill is intended for general workshop use and is specified with a recommended feed in steel up to 800 N of 0.03 mm/rev. How does the protective countersink benefit the process? The protective countersink helps to centre reliably on the workpiece, reduces burrs and protects the pilot geometry, improving repeatability and reducing rework when using the TECWERK centre drill. Which standard does the centre hole conform to? The tool is designed in accordance with DIN 333 and is suitable for producing centre holes to DIN 332 Blatt 1 Form B as part of standard preparation for turning or drilling. TECWERK: Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund
3.15mm Centre Drill DIN 333 Form R Radius, HSS Right-Hand 60° - TECWERK
Precise centre bores are achieved with a HSS construction, DIN 333 Form R radius tip and a 60° countersink angle, delivering repeatable results for turning preparation and general workshop drilling. Order the centre drill directly via Metav Werkzeuge or ask our consultants if needed. Centre drill DIN 333 Form R Ø3.15 mm, HSS – TECWERK A Centre drill DIN 333 Form R Ø3.15 mm HSS engineered to produce accurate centre holes for metalworking, lathe preparation and general workshop use. HSS construction for durability DIN 333 Form R with radius tip 60° countersink angle for standard centres 8 mm shank, 50 mm overall length Consistent centre holes for reliable machining starts The combination of HSS material and the Form R geometry ensures a balance of toughness and edge retention, reducing breakouts when preparing lathe centres. The 60° countersink angle matches conventional centre standards, so the centring operation produces stable seating for workpieces. For steel applications up to 800 N a feed of about 0.03 mm/rev is recommended, which helps maintain concentricity while avoiding excessive axial loads on the tool. Versatile use across workshop tasks Designed for general-purpose workshop applications, this centring tool performs well when preparing holes for turning, facing and repositioning operations. The radius tip of Form R gives a controlled cutting entry that eases alignment and reduces the risk of wandering on curved or uneven surfaces. Where a precise start is required before drilling or reaming, the centring tool provides a reliable pilot that improves subsequent tool life and component quality. Practical handling and toolholder compatibility With an 8 mm shank and 50 mm overall length, the tool fits standard 8 mm collets and chucks used in drills and lathe tailstocks. The right-hand cutting orientation is compatible with typical spindle rotation, permitting straightforward programme integration and manual use. The absence of a protective countersink (no pilot countersink fitted) keeps the geometry simple, making it straightforward to seat the tool in conventional holders and to inspect the cutting tip. Supply reliability and workshop support Delivered in a compact pack, the centring drills are supplied in a pack size of 5, suitable for replenishment in busy workshops. Metav’s procurement and logistics centre in Emmerich acts as a quality filter for the European market, combining extensive product range with consistent availability and clear order handling. For questions on application or to confirm compatibility with a specific machine setup, technical advice is available from Metav Werkzeuge’s consultants. Contact Metav Werkzeuge for application advice or to secure stock of the TECWERK centre drill and benefit from expert guidance and direct supply from Emmerich. Technical Data Article number: 2000861953NW Manufacturer: TECWERK Product type: Centre drill Design: Form R (with radius) Standard: DIN 333 Material: HSS Version: without protective countersink Facts Diameter: 3.15 mm Overall length: 50 mm Shank diameter: 8 mm Countersink angle: 60° Feed in steel (up to 800 N): 0.03 mm/rev Cutting direction: right-hand Special features For centre holes according to DIN 332 Sheet 1 Form R Radius tip for reliable lathe starts General workshop use Pack size: 5 pieces FAQ What advantage does Form R offer over a standard centre point? Form R provides a radius tip that gives a gentler entry and improved stability when creating centre bores; the TECWERK centre drill with Form R reduces wandering and supports reliable turning starts. Which feed and cutting direction are recommended for this tool? A feed of approximately 0.03 mm/rev in steel up to 800 N is recommended, and the tool is designed with a right-hand cutting orientation for standard spindle rotation. What holder size is required for this centre drill? The tool has an 8 mm shank, which fits common 8 mm collets and drill chucks used in workshop drills and tailstocks. Is this centre drill suitable for preparing lathe centres and pilot holes? Yes, the geometry and 60° countersink angle make the tool suitable for preparing lathe centres and pilot holes according to conventional centre standards. How is the product supplied and how can it be identified? The TECWERK centre drill is supplied in packs of five and can be identified by the article number 2000861953NW. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
3.1mm HSS Twist Drill DIN 338 ,short, roll forged, black, Type N - MetavCUT
Twist Drill (Type N) — 3.1 mm, 118° tip, HSS, short, black, DIN 338 — MetavCUT The Twist Drill (Type N) is a short HSS metalworking drill designed for precise drilling in steel and non‑ferrous metals with handheld or machine tools. Short design for higher drilling stability 3.1 mm diameter for precise metal holes 118° tip for improved centring on curved work Type N HSS for reliable metal machining Compliant with DIN 338 for consistent quality Greater Precision and Durability through HSS and Short Design A compact HSS construction combined with a short profile delivers enhanced rigidity and reduced deflection during drilling, which directly improves hole accuracy. The Type N geometry is optimised for metalworking, offering a balance between cutting performance and tool life. This design reduces vibration and ensures that each hole stays consistent, making the drill ideal for precision tasks where repeatable results matter. Easier Start and Better Concentricity with a 118° Tip Thanks to the 118° tip angle, the drill achieves reliable centring and a controlled entry into softer and medium‑hard materials, helping to avoid wandering on curved or slightly uneven surfaces. When used with a Drilling Machine or a well‑controlled handheld drill, the tip geometry minimises the need for pilot operations and supports clean chip evacuation for continuous drilling in metals. Suited for Workshops, Maintenance and Fabrication This short twist drill is intended for technicians, maintenance professionals and metal fabricators who need dependable performance on steel, cast iron and non‑ferrous alloys. The tool excels in applications requiring stable cutting behaviour and easy regrinding, so it is a practical choice for both small repair jobs and repetitive production tasks in a workshop environment. Conformity to DIN 338 and Practical Handling Advice Manufactured to DIN 338, this short twist drill follows established dimensional and quality standards for short cylindrical‑shank drills. For best results, use cutting oil when drilling steel and maintain moderate feed to avoid overheating; regular resharpening keeps the tip geometry accurate. The robust HSS material enables straightforward resharpening while preserving cutting performance over many cycles. MetavCUT supports consistent manufacturing tolerances to match workshop expectations. Strong recommendation: Choose the MetavCUT short HSS twist drill for demanding metalwork and consult METAV Werkzeuge for tailored advice — they offer comprehensive, expert support via email, phone or WhatsApp at info@metav-werkzeuge.com | +49 2822 7131930 | +49 170 2837271 Designation: Twist Drill Brand: MetavCUT SKU: 40031-FDA Diameter: 3.1 mm Tip angle: 118° Spiral length: 36 mm Overall length: 65 mm Execution: Short Type: Type N Material: HSS Colour: Black For drill machine: Drilling Machine Application: Drills for metal Norm: DIN 338 Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the Twist Drill used for and which materials is it intended to work with? The MetavCUT Twist Drill Type N is primarily used for drilling in metal; it is designed for machining steel, cast iron and many non‑ferrous metals, offering stability and suitability for workshop and maintenance applications. Which three drill types are commonly distinguished? Common drill categories are metal drills, wood drills and stone/concrete drills; the MetavCUT Twist Drill belongs to the metal drill group and is optimised accordingly. What is a Twist Drill used for? A Twist Drill is mainly applied when working on high‑strength materials and for larger hole diameters; this form is easy to resharpen and withstands higher loads during machining. Why are twist drills point‑sharpened? Point sharpening reduces the cross‑cut at the tip, which lowers friction and therefore requires less feed force; additionally, sharpening improves centring of the drill tip in the workpiece.
3.1mm HSS-G Body Drill ,double sided, black finished without margin - MetavCUT
Body Drill — Twist Drill for Drilling Machine, Diameter 3.1 mm, 135° Tip, HSS‑G, Double‑Sided, Black Finished A Body Drill twist drill designed for metalworking, combining a 3.1 mm diameter and 135° tip angle for reliable performance in demanding sheet and plate applications. Profi Line HSS‑G for metal drilling Double‑sided design for extended use 3.1 mm diameter with 135° tip angle Fully ground shank for precise runout Black finish for improved corrosion resistance High‑performance geometry for harder materials and faster results The fully ground HSS‑G geometry and the 135° tip angle are optimised for tougher materials such as stainless and alloyed steels. This geometry reduces cutting forces and improves centring on metals, so the twist drill penetrates with less tendency to wander. The design yields cleaner holes and can shorten drilling time compared with conventional rolled flutes. For users requiring dependable metalworking performance, this results in fewer re‑drills and higher process efficiency. Precision and stability from the ground shank and compact length A fully ground shank provides superior concentricity and lower runout, which directly benefits hole quality when operated in a Drilling Machine. The compact overall length of 46 mm and the shortened flute make the tool inherently rigid, improving straightness in thin sheets and small holes. Because the ground geometry is achieved by CNC grinding, expected outcomes are consistent hole diameters and reduced burr formation, an advantage for quality‑sensitive applications. Practical double‑sided concept for workshop productivity The double‑sided execution means the tool serves as two cutting ends in one: when one tip wears, the twist drill can be reversed to use the other, extending service life. This doppelseitig arrangement is particularly useful in bodywork and thin‑sheet applications where short, stable drills excel. The configuration reduces downtime and keeps tool inventories lean, offering a simple efficiency gain for repair shops and metal fabricators. Intended users and recommended working conditions Designed by MetavCUT for metalworking professionals, the tool suits technicians, bodyshop mechanics and workshop operators who use handheld or bench Drilling Machines for rivet and thin‑plate holes. The black finished surface improves surface protection and handling visibility. For best results, use adequate cooling and moderate speeds for hardened materials; note that ground HSS‑G drills achieve high precision but may require careful handling to avoid shock or bending. Strong recommendation: For reliable metal drilling performance choose the MetavCUT Profi Line Body Drill with its HSS‑G ground geometry and double‑sided design — METAV Werkzeuge offers expert, personalised advice and order support, contact via info@metav-werkzeuge.com or call +49 2822 7131930, WhatsApp +49 170 2837271 Designation: Body Drill (Karosseriebohrer) Brand: MetavCUT SKU: 59031‑FDA Diameter: 3.1 mm Tip angle: 135° Material: HSS‑G Execution: Double‑sided Colour: Black finished without margin Shank execution: Fully ground For machine type: Drilling Machine Spiral length: 10 mm Overall length: 46 mm Model series: Profi Line Application: Drills for metal Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is a twist drill used for? The MetavCUT Body Drill twist drill is primarily applied to machining high‑strength materials and larger drill diameters; its shape is easy to re‑grind and it withstands greater loads, making it especially suitable for sheet‑metal and bodywork holes. Which three drill types exist? A practical distinction is: Metal drills, Wood drills and Masonry/Concrete drills — the MetavCUT Body Drill belongs to the metal drills category and is optimised for steel and similar materials. Can the MetavCUT Body Drill be used with a handheld drilling machine? Yes, the Body Drill is compatible with handheld Drilling Machines for tasks in metalworking, though best hole quality is achieved with steady feeds and, when possible, a bench or column drill and appropriate cooling. Why are twist drills sharpened at the tip? Sharpening reduces the cross‑cut at the tip of a twist drill; by lowering friction the required feed forces decrease and the drill centres better in the workpiece, which is why the 135° tip on the MetavCUT Body Drill improves performance in harder materials.
3.1mm HSS-G Body Drill ,double sided, bright finished - MetavCUT
Karosseriebohrer (Body Drill) — Double-Sided HSS-G Twist Drill, 3.1 mm, 135° Tip, Bright Finished, Fully Ground Shank The Karosseriebohrer (Body Drill) is a double-sided Twist Drill designed for precision metalworking in portable drilling machines, combining HSS-G cutting performance with a 135° tip for demanding materials. Double-sided design for extended service life HSS-G grinding for fast, clean drilling 135° tip for hard and stainless steels Fully ground shank for high concentricity Bright finish reduces material adhesion Precision cutting performance for tough metals The MetavCUT Karosseriebohrer is manufactured from HSS-G, a ground high-speed steel that delivers high cutting speed and precise hole quality. The CNC grinding process produces sharp cutting edges and excellent roundness, which reduces vibration and produces clean bores in alloyed and unalloyed steels. This results in faster advance rates and lower operator effort compared with rolled designs, making the tool particularly effective where consistent hole quality is required. Optimised geometry for hard materials and tight holes With a 135° tip angle, this Twist Drill is configured to penetrate tougher materials—such as stainless steel—more reliably than steeper tips. The double-ended layout offers two working tips in one short, rigid body: when one end dulls, invert the drill and resume without interruption. This compact, stable geometry is ideal for sheet-metal work, rivet and thin‑plate holes and applications where runout control matters. Practical handling for workshop and on-site use Designed for use in a Drilling Machine or compatible hand drills, the Karosseriebohrer balances rigidity and accessibility: its short overall length lessens bending in portable setups while the fully ground shank ensures high concentricity in chucks. For best results in stationary work and when machining hard alloys, use appropriate cooling and moderate speeds to reduce thermal stress and the risk of breakage. Clean finishing and application-specific advantages The bright finished surface reduces chip adhesion and simplifies chip evacuation in many metalworking tasks, supporting cleaner holes and less post‑processing. The Standard Line model delivers a compact solution for metal drilling tasks with an overall length engineered for stability. Use this drill where precision, short overhang and reliable centring are priorities. Strongly recommend the MetavCUT Karosseriebohrer for precise metal drilling tasks — for personalised technical advice contact METAV Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 (WhatsApp +49 170 2837271) Bezeichnung: Karosseriebohrer Marke: MetavCUT SKU: 58031-FDA Type: double-sided (Doppelseitig) Material: HSS-G Diameter: 3.1 mm Tip angle: 135° Spiral length: 10 mm Overall length: 46 mm Shaft execution: fully ground (geschliffen) Colour: bright finished (blank) Suitable for: Drilling Machine / Hand Drills; application: Drills for metal Model series: Standard Line Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the main use of a Twist Drill? The Twist Drill like the MetavCUT Karosseriebohrer (Body Drill) is primarily used for machining high‑strength materials and larger diameters; its design allows efficient material removal in metals and provides an easily regrindable edge that withstands substantial loads. Which three drill types exist? The main categories are metal drills, wood drills, and masonry/concrete drills; the MetavCUT Karosseriebohrer belongs to the metal drill group and is optimised for steel and non‑ferrous metals. Why are Twist Drills pointed? The pointing reduces the cross‑cut at the tip of a Twist Drill, as with the MetavCUT Karosseriebohrer, lowering friction and required feed forces while improving centring accuracy in the workpiece. Can a metal Twist Drill be used for wood? A metal drill such as the MetavCUT Karosseriebohrer (Body Drill) can be used in wood, but it generally provides poorer guidance and a less clean finish than dedicated wood drills; however, metal drills are easier to resharpen and tend to have lower self‑feeding tendency. For which drilling depths is a Twist Drill most used? A solid through‑hole is commonly made with a Twist Drill; for diameters up to about 20 mm and drilling depths up to roughly 100 mm, the Twist Drill—such as the MetavCUT Karosseriebohrer—is the most frequently used tool. What is better, HSS or HSSE? The common assumption that HSSE is categorically superior to HSS is not always correct; assess working conditions carefully to decide whether the additional cost of HSSE over an HSS‑grade tool like the MetavCUT Karosseriebohrer is justified for your application.
3.1mm HSS-G Twist Drill DIN 1897 ,extra short, bright finished, Type N - MetavCUT
Twist Drill 3.1 mm — Type N, Extra Short, Bright Finished, 135° Tip, HSS‑G, DIN 1897 (MetavCUT) The Twist Drill MetavCUT Type N extra short is a robust metalworking drill designed for use with Drilling Machines and hand-held drills, offering high stability and precise performance for demanding metal applications. Extra-short design for increased stability 135° tip for harder materials like stainless steel Ground HSS‑G for faster drilling and less pressure Cylindrical shank for universal chuck compatibility Faster, more efficient metal drilling for professional results The HSS‑G ground geometry of this Twist Drill reduces cutting forces and enables up to 40% faster drilling while requiring significantly less feed pressure, which is especially beneficial when working with alloyed and unalloyed steels. The 135° tip angle is optimised for harder materials such as Stainless Steel and Cast Iron, shortening lead-in time and improving centring. For workshops that prioritise productivity, this drill converts technical features into measurable time savings. Stable, compact design for tight spaces and thin materials An Extra Short length improves rigidity and reduces the risk of breakage when compared with standard-length drills, making it ideal for drilling in thin-walled components, sheet metal and profiles. The Cylindrical Shank fits conventional three-jaw chucks, offering universal compatibility and quick tool changes. These design choices translate into greater confidence when operating in confined or awkward positions where control and stability matter most. Suited applications and intended users This Twist Drill Type N is intended for metalworkers, fabricators, maintenance engineers and ambitious hobbyists who need a reliable solution for drilling in steel, castings, non‑ferrous metals and hard plastics. MetavCUT engineered the drill to perform consistently in workshop and on-site conditions, providing a solid tool choice when precise, repeatable holes in demanding materials are required. Compliance, handling and practical guidance for use Manufactured to DIN 1897, the drill meets recognised standards for dimensions and performance, ensuring predictable results and interchangeability. The Extra Short format makes sharpening and re-grinding straightforward, while the Type N normal spiral geometry remains the classic choice for metal drilling. For best performance use appropriate cutting speeds and cooling when drilling stainless or hardened steels to prolong tool life and maintain hole quality. We strongly recommend the MetavCUT Twist Drill for demanding metalworking tasks — for personalised technical advice and application support contact METAV Werkzeuge by eMail at info@metav-werkzeuge.com or by phone at +49 2822 7131930 (WhatsApp +49 170 2837271) Designation: Twist Drill Brand: MetavCUT SKU: 56031-FDA Diameter: 3.1 mm Total Length: 46 mm Spiral Length: 16 mm Tip Angle: 135° Type: Type N Execution: Extra Short Colour: Bright Finished Shank Design: Cylindrical Material: HSS‑G Standard: DIN 1897 Application: Drills for Metal Model Series: Standard Line Suitable For: Drilling Machine (hand-held drills) Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the Twist Drill used for? The MetavCUT Twist Drill Type N is mainly used for machining high‑strength materials and larger hole diameters; it is particularly suitable for alloyed and unalloyed Steel, Cast Steel, Cast Iron, Sintered Iron, Tempered Castings, non‑ferrous metals and hard plastics. Its Extra Short design also makes it well suited to drilling thin materials and applications with limited space. Which three drill types exist? In general use three main drill types are distinguished: Metal drills, Wood drills and Stone/Concrete drills. The MetavCUT Twist Drill belongs to the classic Metal drill group and is optimised for metalworking tasks. Why are Twist Drills pointed? The point grinding reduces the cross‑cut at the drill tip; by re‑pointing the Twist Drill the friction forces are significantly lowered so that reduced feed forces are needed and the tip centres better in the workpiece, improving accuracy and lowering the risk of walking. Can the Twist Drill be used for wood? A Metal drill such as the MetavCUT Twist Drill can be used in Wood, but guidance and hole quality are inferior compared with dedicated Wood drills. Metal drills are easier to re‑sharpen and show less “self‑feeding”, yet they provide less precise guidance and a rougher finish when used in timber.
3.1mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Twist Drill — Short Type N, 3.1 mm, 135°, HSS‑G, Bright Finished, DIN 338 The Twist Drill (Short Type N) is a precision metalworking drill bit designed for drilling machines, offering high stability and efficient cutting for alloyed and unalloyed steels in demanding workshop applications. Short Type N HSS‑G twist drill for metal 3.1 mm diameter with 135° tip angle Fully ground shank for precise centring Bright finished surface for corrosion resistance Conforms to DIN 338 for short twist drills Faster drilling with lower feed force for productive workshops The HSS‑G ground construction reduces required feed force significantly, enabling up to 40% faster drilling and roughly 50% less thrust compared with conventional HSS bits. This design converts into shorter cycle times and less operator fatigue in serial or repair work. The combination of a short overall length and a robust geometry increases rigidity, which improves hole quality in hard materials and reduces chatter on portable and stationary Drilling Machines. Greater stability and cleaner holes through short design and 135° tip A short configuration per DIN 338 reduces overhang and bending, delivering higher positional accuracy when working on components with tight tolerances. The 135° tip angle is optimised for harder materials such as stainless steel, because it slows the initial penetration and reduces grabbing, while the Type N normal spiral is the classic metal-cutting flute geometry. For users unfamiliar with these terms: the tip angle controls how the bit enters material, and a larger angle helps when drilling tough alloys by distributing cutting forces over a broader edge. Suited applications and intended users for consistent workshop results This Twist Drill in HSS‑G is intended for professionals in metal fabrication, maintenance and toolrooms who require dependable performance on steel, cast iron, sintered materials, non‑ferrous metals and hard plastics. The fully ground shank ensures accurate clamping and repeatable concentricity in chucks, making it suitable for both hand-held Drilling Machines and bench or CNC setups where short, precise holes up to typical depths are needed. Quality features that save time and simplify handling The bright finished surface offers improved corrosion resistance and eases chip evacuation, while the ground shaft reduces slippage and improves centring during sequential operations. Because these drills are produced to the DIN 338 specification, users benefit from consistent dimensions and compatibility with standard holders and chucks, which simplifies tool inventory and replacement planning. Strong recommendation: For precision metal drilling choose the MetavCUT short HSS‑G Type N Twist Drill for reliable performance and reduced operator effort — METAV Werkzeuge provides expert technical advice and application support if required, contactable via eMail info@metav-werkzeuge.com, phone +49 2822 7131930 or WhatsApp +49 170 2837271 Designation: Twist Drill / Spiralbohrer Brand: MetavCUT SKU: 27031-FDA Type: Type N Diameter: 3.1 mm Tip angle: 135° Overall length: 65 mm Spiral length: 36 mm Material: HSS‑G Execution: Short Shank finish: Fully ground Surface finish: Bright finished For machine: Drilling Machine / Handbohrmaschine Application: Drills for metal Series: Basic Line Norm: DIN 338 Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the Twist Drill used for and which materials is it intended to cut? The MetavCUT Twist Drill Type N is primarily used for drilling metal and is especially suitable for alloyed and unalloyed steel, cast steel, cast iron, sintered iron, non‑ferrous metals and hard plastics. Its short, rigid design supports precise holes in demanding workshop and maintenance tasks. Which three drill types are commonly distinguished? The three common drill types are metal drills, wood drills, and stone/concrete drills. The MetavCUT Twist Drill falls into the metal drill category and is optimised for machining metallic materials.
3.1mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Der kurze MetavCUT Profi Line Spiralbohrer überzeugt durch seine HSS-G-Geschliffene Ausführung und den 135° Spitzenwinkel, die stabile, präzise Bohrungen in Stahl ermöglichen; profitieren Sie von schnellerem Vorschub und geringerem Anpressdruck und bestellen Sie den Bohrer direkt über Metav oder fragen Sie unsere Beratung bei Bedarf an. MetavCUT Profi Line Spiralbohrer — Spiralbohrer für Metall Der MetavCUT Profi Line Spiralbohrer ist ein kurzer, geschliffener HSS-G Spiralbohrer für präzise Metallbohrungen an stationären und handgeführten Maschinen. Kurze Ausführung für erhöhte Stabilität Geschliffener HSS-G für saubere Bohrlöcher Spitzenwinkel 135° für harte Werkstoffe Geeignet für Handbohrmaschine und Bohrständer DIN 338 Klassifizierung, Profi Line Ausführung Präzision bei Metallbearbeitung dank kurzer Bauart Die kurze Bauart reduziert die Auskraglänge und minimiert dadurch Vibrationen sowie Verbiegen bei hohem Vorschub. Das Resultat ist eine deutlich verbesserte Präzision und eine längere Standzeit des Werkzeugs bei der Bearbeitung von Stahl. Für Anwender bedeutet das weniger Ausschuss und nachgearbeitete Bohrungen. HSS-G Geschliffene Geometrie für saubere Schnittkanten Die geschliffene HSS-G-Geometrie sorgt für sehr scharfe Schneidkanten und hohe Rundlaufgenauigkeit. Dadurch entstehen saubere und maßhaltige Bohrlöcher in legierten und unlegierten Stahlgüten sowie Gusswerkstoffen. Für weniger erfahrene Anwender: Geschliffene Bohrer sind besonders scharf, sollten stationär oder mit geeigneter Kühlung eingesetzt werden, um Brüche zu vermeiden. Optimiert für harte Werkstoffe durch 135° Spitzenwinkel Der 135° Spitzenwinkel reduziert das Anbohrverhalten bei harten Werkstoffen und verringert das "Wandern" auf der Oberfläche. Dadurch ist ein kontrollierter Einstechvorgang möglich, was besonders bei Edelstahl und hartem Temperguss von Vorteil ist. Anwender profitieren von schnellerem Vorschub und saubereren Löchern bei reduziertem Krafteinsatz. Einsatzgebiet und Zielgruppe Dieser Spiralbohrer richtet sich an Werkstätten, Industrie und ambitionierte Heimwerker, die Metall präzise bearbeiten wollen. Die Kombination aus kurzer Ausführung und geschliffener Spannut macht das Werkzeug ideal für präzise Reparaturarbeiten, Montageaufgaben und das Arbeiten an Bauteilen mit engen Toleranzen. Verarbeitung und Materialvorteile Der Bohrer besteht aus HSS-G (Schnellarbeitsstahl, geschliffen) und weist eine robuste Oberfläche in blanker Ausführung auf. Die Ausführung nach DIN 338 garantiert standardisierte Maße und Kompatibilität mit gängigen Zylinderschaft-Aufnahmen. Die kurze Länge unterstützt die Stabilität bei Verwendung in Handbohrmaschinen oder Bohrständern. Sichern Sie sich den MetavCUT Profi Line Spiralbohrer als verlässliches Präzisionswerkzeug und kontaktieren Sie Metav für persönliche Beratung per E‑Mail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 Produktmerkmale Artikelnummer: 48031-FDA Marke: MetavCUT Serie: Profi Line Daten Durchmesser: 3,1 mm Gesamtlänge: 65 mm Spirallänge: 36 mm Spitzenwinkel: 135° Verpackungseinheit: 10 Besonderheiten Ausführung: kurz Material: HSS-G Schaftausführung: geschliffen Norm: DIN 338 Typ: Typ N Farbe: blank Für Bohrmaschine: Handbohrmaschine FAQ Für welche Materialien ist dieser Bohrer geeignet? Der MetavCUT Profi Line Spiralbohrer aus HSS-G ist besonders geeignet für legierten und unlegierten Stahl, Gusswerkstoffe und Nichteisenmetalle sowie für Hartkunststoff. Kann der Bohrer in einer Handbohrmaschine verwendet werden? Ja, die kurze Ausführung und die stabile Zylinderschaft machen den Spiralbohrer für den Einsatz in Handbohrmaschinen ebenso geeignet wie für stationäre Bohrständer. Warum ist der Spitzenwinkel von 135° vorteilhaft? Der 135° Spitzenwinkel vermindert das Anbohren bei harten Werkstoffen und ermöglicht einen ruhigeren Vorschub sowie sauberere Bohrlochkanten. Wie unterscheidet sich die geschliffene Variante von einer gewalzten Ausführung? Ein geschliffener HSS-G Bohrer bietet schärfere Kanten und höhere Rundlaufgenauigkeit, eignet sich daher besonders für Metall und präzise Bohrungen, benötigt aber sorgfältigen Einsatz und Kühlung. Welche Norm und Serie hat der Bohrer und was bedeutet das? Der Bohrer entspricht DIN 338 und gehört zur Profi Line von MetavCUT; das sichert standardisierte Abmessungen, hohe Qualität und Kompatibilität mit gängigen Aufnahmen.
3.1mm HSS-G Twist Drill DIN 338 ,short, TIN-coated, Type N - MetavCUT
Die kurze Ausführung und die TIN-beschichtung gewährleisten hohe Stabilität und reduzierte Abnutzung bei Metallbohrungen; kombiniert mit dem geschliffenen HSS-G ergibt sich eine präzise und langlebige Lösung für Werkstatt und Industrie. Bestellen Sie den Spiralbohrer direkt über Metav Werkzeuge oder fragen Sie unsere Beratung bei Bedarf an. Spiralbohrer kurz »Standard Line« von MetavCUT Der Spiralbohrer kurz für präzise Metallbearbeitung, geeignet für legierten und unlegierten Stahl sowie Nichteisenmetalle. Kurze Ausführung für höhere Stabilität und geringes Ausschlagen TIN-beschichtung reduziert Reibung und erhöht Lebensdauer HSS-G geschliffen für scharfe Kanten und hohen Rundlauf 135° Spitzenwinkel für harte Werkstoffe optimiert Passend für Handbohrmaschine und stationäre Maschinen Mehr Stabilität, mehr Präzision beim Metallbohren Die kurze Bauform reduziert die Auskraglänge und minimiert Vibrationen, was die Stabilität und die Lochqualität erhöht. Für Anwender bedeutet das weniger Ausschlag beim Anbohren und gleichmäßigere Bohrbilder bei dünnen bis mittleren Werkstücken. Durch den geschliffenen Schaft wird der Rundlauf verbessert, sodass Werkstattmaschinen und handgeführte Geräte präziser arbeiten können. Schnelleres Arbeiten dank Beschichtung und Schneidgeometrie Die TIN-beschichtung verringert Reibung und Hitzeentwicklung, wodurch die Standzeit des Werkzeugs steigt. Die geschliffene Geometrie sorgt für scharfe Schneiden, die das Bohren um bis zu 40 % beschleunigen und gleichzeitig etwa 50 % weniger Anpresskraft erfordern. Das resultiert in höherer Effizienz und geringerer Ermüdung bei wiederkehrenden Arbeitsgängen. Vielseitigkeit bei verschiedenen Metallwerkstoffen Dieser Spiralbohrer eignet sich für legierten und unlegierten Stahl, Temperguss, Gusseisen, Sintereisen, Neusilber, Kupfer, Bronze sowie Hartkunststoff. Anwender profitieren von einer breiten Einsatzspanne, weil ein einzelnes Werkzeug mehrere Materialarten sicher und sauber bearbeiten kann. Bei anspruchsvollen Werkstücken ermöglicht der 135° Spitzenwinkel ein kontrolliertes Eindringen. Praxistipps für sicheren Einsatz und lange Lebensdauer Für beste Ergebnisse Kühlung einsetzen, um Hitze und Verschleiß zu reduzieren. Beim Bohren in sehr harten Werkstoffen empfiehlt sich langsame Vorschubgeschwindigkeit. Da geschliffene Bohrer bei unsachgemäßer Handhabung spröde reagieren können, ist eine stationäre oder stabil geführte Maschine vorteilhaft. Für exakte Positionen vorher anpunkten, speziell bei hohen Anforderungen an Passgenauigkeit. Für wen dieses Werkzeug entwickelt wurde Der Spiralbohrer richtet sich an Werkstätten, Instandhaltung, Montage und ambitionierte Heimwerker, die Wert auf präzise Metallbearbeitung legen. MetavCUT kombiniert mit der Standard Line ein robustes Fertigungsprofil, das sowohl in Serienprozessen als auch bei Einzelanfertigungen verlässliche Bohrresultate liefert. MetavCUT empfiehlt diesen Spiralbohrer für anspruchsvolle Metallarbeiten; bei technischen Fragen steht die Metav-Beratung per eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 zur Verfügung Produktmerkmale Artikelnummer: 46031-FDA Marke: MetavCUT Serie: Standard Line Bezeichnung: Spiralbohrer Norm: DIN 338 Fakten Durchmesser: 3,1 mm Gesamtlänge: 65 mm Spirallänge: 36 mm Spitzenwinkel: 135° Verpackungseinheit: 10 Stück Besonderheiten Material: HSS-G — geschliffen, hohe Schärfe Farbe: TIN-beschichtet — reduziert Reibung und Verschleiß Typ: Typ N — Normalspirale für Metall Ausführung: kurz — erhöhte Stabilität Für Bohrmaschine: Handbohrmaschine FAQ Wie eignet sich dieser Bohrer für Edelstahl? Der Spiralbohrer von MetavCUT in der Standard Line mit 3,1 mm Durchmesser und 135° Spitzenwinkel eignet sich für harte Werkstoffe; die TIN-beschichtung reduziert Reibung, wobei langsame Vorschubgeschwindigkeiten empfohlen werden. Kann der Bohrer in einer Handbohrmaschine verwendet werden? Ja, die kurze Ausführung ist für den Einsatz an Handbohrmaschine geeignet, da die geringere Auskraglänge die Stabilität verbessert und das Wandern auf der Oberfläche vermindert. Welches Material hat der Bohrer und was bedeutet das? Der Bohrer ist aus HSS-G gefertigt; das heißt geschliffen mit hoher Schärfe und guter Rundlaufgenauigkeit, ideal für präzise Metallbohrungen, aber vorsichtig bei Schlagbeanspruchung zu handhaben. Was steckt hinter der Kennung 46031-FDA? Die Artikelnummer 46031-FDA ist die SKU für den Spiralbohrer MetavCUT Standard Line und dient der eindeutigen Identifikation in Bestellungen und Lagerverwaltung. Brauche ich Kühlung beim Bohren mit diesem Bohrer? Bei Metallbearbeitung erhöht ein geeignetes Kühlsystem die Lebensdauer; insbesondere bei härteren Werkstoffen sorgt Kühlung in Kombination mit der TIN-beschichtung für geringere Reibung und weniger Verschleiß.
3.1mm HSS-G Twist Drill DIN 340 ,long, bright finished - MetavCUT
Der Spiralbohrer von MetavCUT kombiniert HSS-G-Material, eine lange Ausführung nach DIN 340 und einen 135° Spitzenwinkel zu einer Lösung für präzise Tiefbohrungen in Metall. Nutzen Sie die hohe Schneidfähigkeit und die längere Spirallänge für schwer zugängliche Bohrstellen oder tiefe Durchgangs- und Sacklochbohrungen; bei Bedarf steht die Metav-Beratung zur Klärung technischer Fragen bereit. Spiralbohrer HSS-G Langausführung (DIN 340) Der Spiralbohrer von MetavCUT ist eine lange, geschliffene HSS-G-Ausführung für präzise Metallbohrungen mit 135° Spitzenwinkel und 69 mm Spirallänge. HSS-G geschliffen für saubere Bohrbilder Lange Ausführung nach DIN 340 für Tiefbohrungen Spitzenwinkel 135° für härtere Werkstoffe Spirallänge 69 mm für schwer zugängliche Stellen Geeignet für Handbohrmaschine und Werkstattbetrieb Hohe Präzision und längere Standzeit für Metallarbeiten Der HSS-G-Werkstoff gewährleistet scharfe Schneiden und hohe Rundlaufgenauigkeit, was saubere Bohrbilder in Stahl, Gusseisen und Nichteisenmetallen ermöglicht. Die geschliffene Schaftausführung sorgt für konstante Formtreue und ermöglicht eine kontrollierte Spanabfuhr, besonders wichtig bei tiefen Bohrungen. Durch die Kombination aus 135° Spitzenwinkel und präziser Geometrie lässt sich die Anbohrung in harten Werkstoffen sicherer durchführen, sodass weniger Nacharbeit erforderlich ist und die Produktionszeit reduziert wird. Tiefbohrungen sicher und effizient ausführen Die lange Ausführung nach DIN 340 mit einer Gesamtlänge von 106 mm und einer Spirallänge von 69 mm erlaubt das Erreichen tieferer Bohrpunkte, ohne sofort mit Spezialwerkzeug arbeiten zu müssen. Die reduzierte Anpresskraft durch den geschliffenen Schliff verringert die Belastung von Handbohrmaschine und Werkstück, was die Arbeitseffizienz erhöht. Bei tiefen Löchern empfiehlt sich die Nutzung von Kühlung und regelmäßiger Spanabfuhr, um Bruchrisiken zu minimieren und gleichbleibende Bohrqualität zu sichern. Zielgruppen und typische Einsatzfelder Der Spiralbohrer richtet sich an Werkstätten, Instandhaltungsbetriebe und ambitionierte Heimwerker, die zuverlässige Bohrleistungen in legierten und unlegierten Stählen sowie in Gusswerkstoffen benötigen. Typische Anwendungen sind Maschinenbau-Reparaturen, Montagearbeiten und das Nachbohren vorhandener Bohrungen. Die Verpackungseinheit mit 10 Stück macht die Lösung wirtschaftlich für Serienarbeiten und wiederholte Einsätze im Alltagsbetrieb. Handhabung, Sicherheit und Pflegehinweise Beim Einsatz empfiehlt sich eine passende Bohrgeschwindigkeit, abgestimmt auf Material und Durchmesser, sowie die Nutzung von Schneidöl bei Stahl und Guss, um Wärmeentwicklung zu reduzieren. Die geschliffene Ausführung begünstigt scharfe Kanten, daher ist der Bohrer mit stationären oder gut geführten Handbohrmaschinen am sichersten einzusetzen. Regelmäßige Sichtprüfung auf Abnutzung und gezielte Nachschleifungen verlängern die Lebensdauer und erhalten die Bohrpräzision. Empfehlung: Den Spiralbohrer von MetavCUT in HSS-G für tiefe Metallbohrungen über Metav beziehen; bei technischen Fragen steht das Team in Emmerich per eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 zur Verfügung Produktmerkmale Artikelnummer: 53031-FDA Bezeichnung: Spiralbohrer Marke: MetavCUT Serie: Standard Line Norm: DIN 340 Daten Durchmesser: 3,1 mm Gesamtlänge: 106 mm Spirallänge: 69 mm Spitzenwinkel: 135° Besonderheiten Material: HSS-G (Hochleistungs-Schnellstahl, geschliffen) Schaftausführung: geschliffen (full ground für hohe Rundlaufgenauigkeit) Ausführung: lang (DIN 340, verlängerte Arbeitslänge für tiefe Bohrungen) Für Bohrmaschine: Handbohrmaschine Farbe: blank Verpackungseinheit: 10 FAQ Für welche Werkstoffe eignet sich der Bohrer besonders? Der Spiralbohrer MetavCUT HSS-G eignet sich besonders für legierte und unlegierte Stähle, Temperguss, Grauguss sowie Nichteisenmetalle; die Kombination aus HSS-G-Material und 135° Spitzenwinkel reduziert Anbohrkräfte und erzielt saubere Bohrbilder. Ist der Bohrer für tiefe Sacklochbohrungen geeignet? Ja, die lange Ausführung nach DIN 340 mit 69 mm Spirallänge wurde für tiefere Bohrungen entwickelt; beim Einsatz des Spiralbohrer MetavCUT HSS-G (SKU 53031-FDA) empfiehlt sich jedoch die Nutzung von Kühlung und kontrollierter Spanabfuhr. Kann der Bohrer in einer Handbohrmaschine verwendet werden? Der Spiralbohrer ist für Handbohrmaschine ausgelegt und eignet sich für Werkstatt- und Montagearbeiten; bei sehr tiefen oder präzisen Bohrungen ist die Nutzung einer stationären Maschine empfehlenswert, um Rundlaufabweichungen zu vermeiden. Wie wird die Standzeit verbessert? Die geschliffene HSS-G-Geometrie bietet scharfe Kanten und hohe Rundlaufgenauigkeit, was die Standzeit erhöht; zusätzlich verlängert die richtige Schnittgeschwindigkeit und der Einsatz von Schneidöl die Lebensdauer des Bohrers. In welcher Verpackungseinheit wird der Bohrer geliefert? Der Spiralbohrer MetavCUT Standard Line wird in einer Verpackungseinheit zu 10 Stück geliefert, was die Organisation von Ersatzteilen und Serienarbeiten vereinfacht.
3.20mm Double-Ended Body Drill HSS Profile-Ground Cross Point Short Spiral Cylindrical Shank Right-Hand - TECWERK
Benefit from the combination of HSS cutting performance, a double-ended design for rapid changeovers and a short spiral that clears chips in thin sheet work; order directly via Metav Werkzeuge or consult our advisors for application guidance. Double-ended drill D 3.2 mm — TECWERK double-ended HSS bodywork drill, short spiral A double-ended drill D 3.2 mm by TECWERK for efficient drilling of thin materials and sheet-metal work with hand drills HSS construction for sustained hardness Double-ended design for quick tool changes Profile-ground with cross point for clean starts Short spiral ideal for thin sheet metal Fast, clean holes in thin sheet metal The double-ended design and HSS construction combine to deliver economical, repeatable performance when working on vehicle body panels and other thin metals. The short flute geometry and cross point reduce walking on smooth surfaces, producing clean holes from the first pass. For workshop routines where speed and hole quality matter, this tool minimises rework by providing a reliable centre and consistent chip evacuation on thin materials, making it well suited for portable drilling operations. Reduced downtime and straightforward handling A profile-ground cutting geometry and cylindrical shank allow secure clamping in standard chucks and rapid rotation changes between the two cutting ends. The double-ended layout effectively doubles utilisation per item and lowers inventory complexity for frequent small-diameter drilling tasks. The bright finish and precision grind mean predictable wear behaviour, so maintenance cycles are easy to plan and tool replacement becomes a simple, low-effort process that supports steady production flow. Application notes and practical guidance for workshops Right-hand cutting and a short spiral (spiral length 9.50 mm) make the tool especially effective in thin-sheet applications where chip control is essential. The overall length of 49 mm and a nominal diameter of 3.2 mm match common hand-drill setups while the Zylinderschaft (cylindrical shank) fits standard chucks without adapters. Packaged in units of 10, this double-ended format supports both small repair shops and larger service bays. Careful clamping, moderate feed and stable workpiece support will extend service life and preserve hole quality when working with delicate sheet materials. Contact Metav Werkzeuge today for TECWERK double-ended drills and advice from Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitable assortments and delivery options Technical data Article number: 2000860131NW Manufacturer: TECWERK Product type: Double-ended drill Product name: Double-ended drill D 3.2 mm — TECWERK Packaging unit: 10 Core measurements Diameter: 3.20 mm Overall length: 49 mm Spiral length: 9.50 mm Shank diameter: 3.2 mm Design and special features Material: HSS Profile-ground cutting geometry Cross-ground point Short spiral — optimised for thin materials Right-hand cutting direction Cylindrical shank Bright (blank) finish FAQ What materials is this drill suitable for? The TECWERK double-ended bodywork drill is intended primarily for thin metals and sheet-metal applications; the HSS construction suits typical bodywork materials. How does the double-ended design benefit workshop operations? A double-ended drill provides two usable cutting ends per item, reducing tool changes and inventory while maintaining consistent performance across repetitive tasks. What size and length does the drill have? The tool has a nominal diameter of 3.20 mm, an overall length of 49 mm and a spiral flute length of 9.50 mm. Can the drill be used in standard hand drills? Yes — the cylindrical shank is compatible with standard chucks commonly found on portable hand drills. Does the cross-ground point prevent walking on sheet surfaces? The cross-ground geometry improves centring and reduces walking on smooth sheet materials, supporting more accurate starts without a pilot. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
3.25mm HSS Twist Drill DIN 338 ,short, roll forged, black, Type N - MetavCUT
Spiralbohrer von MetavCUT – HSS Kurzspiralbohrer Der Spiralbohrer von MetavCUT in kurzer Ausführung eignet sich für präzise Metallbohrungen mit Handbohrmaschine und stationären Maschinen. HSS-Kurzbohrer nach DIN 338 Typ N Normalspirale für Metallbohrungen Spitzenwinkel 118° für einfache Zentrierung Hohe Stabilität dank kurzer Auskragung Zylinderschaft für Handbohrmaschine geeignet Hohe Stabilität für präzise Metallbohrungen Dank der kurzen Bauform ergibt sich eine deutlich geringere Auskragung und damit mehr Stabilität beim Bohren in Stahl und Gusseisen. Diese Eigenschaft reduziert Vibrationen und verbessert die Rundlaufgenauigkeit, was insbesondere bei Durchmesser um 3,25 mm spürbar ist. Für Anwender bedeutet das weniger Nacharbeit durch Ausrisse und sauberere Passungen. In Werkstatt und Montage sorgt die kompakte Bauweise für verlässliche Ergebnisse bei Handgeführten sowie stationären Maschinen. Materialeigenschaften: Warum HSS bei Standardaufgaben überzeugt Der Einsatz von HSS (Schnellarbeitsstahl) bietet eine hohe Elastizität und dadurch ein vermindertes Bruchrisiko, besonders bei Bohrungen unter 6 mm. Rollgewalzte Fertigung erhöht die Zähigkeit des Werkstoffs, während die Oberfläche in Schwarz geschützt ist. Dieses HSS-Werkzeug eignet sich für legierten und unlegierten Stahl, Nichteisenmetalle und Kunststoffe. Der unmittelbare Kundennutzen ist eine längere Standzeit und geringere Ausfallzeiten durch Brüche. Anwendungsbereich und Maschinenauswahl Mit einem Durchmesser von 3,25 mm fällt der Bohrer in den Standard-Bereich und ist daher ideal für alltägliche Werkstattarbeiten, Montage und DIY-Projekte. Die Ausführung mit Zylinderschaft passt in handelsübliche Spannfutter von Handbohrmaschine ebenso wie in stationäre Säulenbohrer. Für tiefe Sacklochbohrungen oder sehr harte Werkstoffe ist Vorsicht geboten; bei Bohrtiefen über das Fünffache des Durchmessers empfiehlt sich eine abgestufte Vorgehensweise oder spezielles Vollhartmetall. Designmerkmale und Tipps für den Einsatz Die Normalspirale (Typ N) bietet eine ausgewogene Spanabfuhr und ist optimiert für Metall. Der Spitzenwinkel 118° erleichtert das Anbohren und ist vielseitig einsetzbar; für besonders harte Werkstoffe kann ein größerer Winkel vorteilhaft sein. Für saubere Ergebnisse empfiehlt sich Anpunkten vor dem Bohren und angepasste Schnittgeschwindigkeit, um Überhitzung zu vermeiden. Die kurze Spirallänge unterstützt die Führungsstabilität und reduziert das Risiko von Verkantungen. MetavCUT empfiehlt den HSS Kurzspiralbohrer für präzise Metallbohrungen in Werkstatt und Produktion; Bestellungen und technische Rückfragen gerne an info@metav-werkzeuge.com oder telefonisch unter +49 2822 7131930 Technische Daten Artikelnummer: 400325-FDA Marke: MetavCUT Bezeichnung: Spiralbohrer Ausführung: kurz Typ: Typ N Norm: DIN 338 Daten Durchmesser: 3,25 mm Gesamtlänge: 65 mm Spirallänge: 36 mm Spitzenwinkel: 118° Verpackungseinheit: 10 Besonderheiten Material: HSS (Schnellarbeitsstahl) Farbe: schwarz Zylinderschaft: passend für Handbohrmaschine DIN 338: kurze Spiralbohrer mit Zylinderschaft Typ N: Normalspirale, geeignet für Metall FAQ Ist dieser Bohrer für Handbohrmaschine geeignet? Ja, der MetavCUT Spiralbohrer in kurz-Ausführung mit Zylinderschaft ist für Handbohrmaschine geeignet und bietet durch die geringe Auskragung erhöhte Stabilität. Für welche Materialien eignet sich der HSS-Bohrer? Der HSS-Bohrer von MetavCUT eignet sich für legierten und unlegierten Stahl, Gusseisen, Nichteisenmetalle sowie Kunststoffe dank der elastischen Eigenschaften von Schnellarbeitsstahl. Was bedeutet Typ N bei diesem Bohrer? Typ N steht für Normalspirale; diese Spirale ist für allgemeine Metallbohrungen optimiert und sorgt für eine ausgewogene Spanabfuhr beim MetavCUT Spiralbohrer. Wann sollte ein anderer Spitzenwinkel gewählt werden? Bei sehr harten Werkstoffen oder Edelstahl kann ein größerer Spitzenwinkel als 118° sinnvoll sein, der MetavCUT Spiralbohrer mit 118° ist hingegen sehr vielseitig für Standardmetalle. Welche Vorteile bringt die kurze Ausführung nach DIN 338? Die kurze Ausführung nach DIN 338 reduziert die Neigung zum Verbiegen, erhöht die Präzision und eignet sich besonders für belastete Bohrungen in Stahl und Gusseisen.
3.25mm HSS-G Body Drill ,double sided, bright finished - MetavCUT
Der MetavCUT Karosseriebohrer überzeugt durch HSS‑G‑Geschliff und die doppelseitige Ausführung: präzise Bohrlöcher bei reduziertem Kraftaufwand und die Möglichkeit, den Bohrer bei Stumpfwerden sofort zu wenden. Nutzen Sie die Kombination aus hoher Rundlaufgenauigkeit, robustem Kurzschaft und dem Spitzenwinkel 135° für anspruchsvolle Metallarbeiten. Bestellen Sie den Bohrer direkt über Metav oder fragen Sie unsere Beratung bei Bedarf an. MetavCUT Karosseriebohrer — Kurzschaft‑Doppelendbohrer für Metall Der MetavCUT Karosseriebohrer ist ein doppelseitiger, geschliffener HSS‑G Bohrer, konzipiert für präzise Bohrungen in legierten und unlegierten Stählen sowie Nichteisenmetallen. Doppelseitiger Doppelendbohrer für effizienten Einsatz HSS‑G geschliffen für hohe Präzision in Metall Spitzenwinkel 135° für harte Werkstoffe Geeignet für Handbohrmaschine und stationäre Geräte CNC‑geschliffene Geometrie für saubere Bohrlöcher Präzision und Schnittigkeit durch geschliffene HSS‑Geometrie Die HSS‑G‑Ausführung sorgt dafür, dass die Spannuten und Schneiden durch Schleifen ausgeformt wurden, was eine deutlich höhere Rundlaufgenauigkeit und sehr scharfe Kanten liefert. In der Praxis heißt das: schnelleres Eindringen, sauberere Bohrlöcher und geringerer Vorschubbedarf. Durch den Spitzenwinkel 135° reduziert sich die Anbohrzeit bei harten Werkstoffen, wodurch das Arbeiten in Karosserie und Blechbau effizienter wird. Verwenden Sie Kühlschmierstoffe bei längerem Einsatz, um Standzeit und Qualität zu erhalten. Praktische Vorteile der doppelseitigen Konstruktion im Alltag Die doppelseitige Bauform bietet zwei Schneiden in einem Werkzeug, was Ausfallzeiten reduziert: Ist eine Seite abgenutzt, kann der Bohrer umgedreht werden. Der kurze, geschliffene Schaft erhöht die Stabilität bei handgeführten Maschinen und verhindert Schwingungen. Beachten Sie jedoch, dass geschliffene HSS‑Bohrer bei extremen Vorschubkräften spröder reagieren können; für tiefe oder sehr harte Anwendungen empfiehlt sich die Nutzung an stationären Maschinen mit Kühlung. Anwendungsbereich, Zielgruppe und Einsatzempfehlung Mit einem Durchmesser von 3,25 mm gehört dieses Werkzeug in den Standard‑Bereich und ist ideal für Werkstätten, Karosseriebau und präzise Montagearbeiten. Es eignet sich zum Bohren in legierte und unlegierte Stähle, Gusswerkstoffe sowie Hartkunststoffe. Zur besten Ergebnisqualität empfiehlt sich vorheriges Anpunkten bei genauer Lage, niedrige Zustellung bei Edelstahl und konstante Schmierung. Diese Kombination aus Stabilität und Präzision macht den Bohrer besonders geeignet für Fachbetriebe und ambitionierte Heimwerker. Empfehlung: Für präzise Blech‑ und Karosseriearbeiten empfehlen wir den MetavCUT Karosseriebohrer mit HSS‑G‑Schliff — Bestellanfrage und technische Beratung per eMail an info@metav-werkzeuge.com oder telefonisch +49 2822 7131930 Produktmerkmale Artikelnummer: 580325-FDA Marke: MetavCUT Bezeichnung: Karosseriebohrer Modellserie: Standard Line Fakten Durchmesser: 3,25 mm Gesamtlänge: 46 mm Spirallänge: 10 mm Spitzenwinkel: 135° Besonderheiten Material: HSS‑G (geschliffen; scharfe Kanten, hohe Präzision) Ausführung: doppelseitig (Doppelendbohrer; beidseitig einsetzbar) Schaftausführung: geschliffen (volle Konstruktion für Rundlauf) Farbe: blank Für Bohrmaschine: Handbohrmaschine Verpackungseinheit: 10 Hersteller: MetavCUT FAQ Für welche Materialien ist dieser Bohrer geeignet? Der MetavCUT Karosseriebohrer mit HSS‑G eignet sich für legierte und unlegierte Stähle, Gussstahl, Gusseisen, Sintereisen, Temperguss, Nichteisenmetalle und Hartkunststoffe; die Geometrie ist für Metallanwendungen optimiert. Ist der Bohrer auch für den mobilen Einsatz mit Akkubohrschraubern geeignet? Ja, die Kurzschaft‑Konstruktion und die Eignung für Handbohrmaschinen erlauben den Einsatz mit mobilen Geräten; bei sehr harten Werkstoffen sollte die Drehzahl und Kühlung angepasst werden. Wie verlängere ich die Standzeit des geschliffenen Bohrers? Verwenden Sie geeignete Kühlschmierstoffe, senken Sie die Vorschubkraft bei harten Materialien und vermeiden Sie übermäßige Seitendrücke; das erhöht die Lebensdauer des geschliffenen Werkzeugs. Warum ist ein Spitzenwinkel von 135° vorteilhaft? Ein Spitzenwinkel von 135° reduziert die Anbohrzeit und verringert das Ausreißen bei harten Werkstoffen, somit entstehen sauberere Löcher bei Stahl und Edelstahl. Was bedeutet "doppelseitig" praktisch für die Werkstatt? Doppelseitig heißt, der Bohrer ist an beiden Enden schneidend; das ermöglicht ein sofortiges Umdrehen bei Stumpfwerden und wirkt wie zwei Werkzeuge in einem, was Stillstandzeiten reduziert.
3.2mm HSS Twist Drill DIN 338 ,short, roll forged, black, Type N - MetavCUT
Twist Drill — Type N short HSS, 3.2 mm, 118° tip, black, DIN 338, MetavCUT The Twist Drill is a short Type N HSS metal-drilling bit designed for hand drilling machines, delivering precise, stable holes in a wide range of ferrous and non-ferrous metals. Short HSS design for high stability Optimised 118° tip for reliable entry Complies with DIN 338 for short shank drills 3.2 mm diameter with 65 mm overall length Suitable for use in Drilling Machine applications Greater precision through a short DIN 338 design A short configuration according to DIN 338 reduces overhang and improves rigidity, which directly benefits hole accuracy. The short shaft length and reduced tendency to bend mean less radial runout and more consistent concentricity when working on plates or assemblies. For machinists and workshop technicians, this stability translates into fewer rejected parts and less rework, especially when producing small-diameter holes where precision is critical. Durable HSS construction for reliable metalworking Manufactured from High Speed Steel (HSS), this short Type N twist drill balances elasticity and hardness to resist breakage during typical metal drilling tasks. The roll-rolled HSS production method increases toughness, lowering the risk of fracture when drilling holes under 6 mm in diameter. This makes the bit particularly suitable for alloyed and unalloyed steel, cast iron, non-ferrous metals and many plastics, offering both longevity and consistent cutting behaviour. Practical handling and clear application benefits With a 3.2 mm diameter, 36 mm spiral length and 65 mm overall length, the bit is tailored for handheld and stationary drilling setups where manoeuvrability and control matter. The 118° tip angle provides good centring and smooth penetration on many metals; for very hard stainless steels a different geometry may be preferred. The black finish aids visual contrast and handling in workshop lighting, and the Type N geometry represents the proven classic for general metal drilling tasks. We recommend the MetavCUT Twist Drill (Type N) for precise metalworking applications — for technical guidance or to confirm suitability for specific materials please contact METAV Werkzeuge: info@metav-werkzeuge.com | Tel: +49 2822 7131930 | WhatsApp: +49 170 2837271 Bezeichnung: Twist Drill (kurze Ausführung), Type N, 3.2 mm Durchmesser Marke: MetavCUT SKU: 40032-FDA Durchmesser: 3.2 mm Spiralänge: 36 mm Gesamtlänge: 65 mm Spitzenwinkel: 118° Material: HSS (High Speed Steel) Norm: DIN 338 Ausführung: short / kurz Farbe: black / schwarz Für Bohrmaschine: Drilling Machine / Handbohrmaschine Anwendung: Drills for metal / Bohrer für Metall Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the best use for the Twist Drill from MetavCUT (Type N)? The MetavCUT Twist Drill (Type N) is primarily intended for drilling metals; it performs well on alloyed and unalloyed steel, cast iron and non-ferrous metals. Its short design gives added stability for precise work in workshop and production environments. Can the MetavCUT Twist Drill (Type N) be used in handheld drilling machines? Yes, the Twist Drill is suitable for use in handheld drilling machines and stationary Drilling Machine setups; its short overall length reduces deflection and improves handling during manual drilling operations. For what is a Twist Drill used? A Twist Drill is mainly applied when machining high-strength materials and for larger drill diameters. Its form makes it relatively easy to resharpen and it withstands higher loads. Which three drill types are there? There are Metal drills, Wood drills and Masonry/Concrete drills. Why are twist drills pointed? Pointing reduces the cross-edge at the tip of the twist drill. By pointing, friction forces are significantly lowered which reduces the required feed force and improves centring of the drill tip in the workpiece. Can a metal twist drill be used to drill wood? A metal twist drill can be used in wood, but guidance and hole finish are typically inferior compared with dedicated wood drills. Metal bits are easier to resharpen and show less aggressive self-feeding. For which drilling depths is the twist drill most used? Solid drilling is commonly performed with a twist drill. For diameters up to 20 mm and drilling depths up to 100 mm, the twist drill is the most frequently used tool. Is HSS or HSSE better? The common assumption that HSSE is categorically superior to HSS is not correct. Assess whether the specific working conditions justify the higher cost of HSSE before deciding.
3.2mm HSS-G Body Drill ,double sided, black finished without margin - MetavCUT
Body Drill — Double‑Sided HSS‑G Twist Drill, 3.2 mm, 135° The Body Drill is a double‑sided Twist Drill from MetavCUT Profi Line designed for precise metal drilling with a 3.2 mm Diameter and a 135° Point Angle for harder materials. Body Drill MetavCUT Profi Line 3.2 mm Reversible double‑ended design for extended use HSS‑G fully ground for precise, clean holes 135° point angle for harder steels and stainless Fully ground shank for high concentricity Faster, more precise metal drilling with HSS‑G cutting geometry The fully ground HSS‑G cutting geometry delivers very sharp edges and high running accuracy, so each hole is clean and consistent. For many workshop applications this means up to 40% faster drilling combined with about 50% less feed force compared with conventional HSS drills, which reduces operator effort and machine load. The 135° Point Angle is optimised for harder materials such as stainless steel and cast components, helping the Twist Drill to start reliably and to resist wandering on the workpiece. Practical double‑ended design reduces downtime Thanks to the double‑sided (double‑ended) execution, the tip can be reversed when one end becomes blunt, effectively offering two cutting edges in a compact format. This construction is particularly suited to sheet‑metal and bodywork tasks where short, stable drills are required. The configuration minimises tool changes and keeps productivity high in repetitive tasks while maintaining hole quality in thin and medium‑thickness metal sheets. Suited applications and recommended users This Twist Drill is intended for drilling in alloyed and unalloyed steel, cast steel, cast iron, sintered iron, temper cast, non‑ferrous metals and hard plastics. It is aimed at professional users in automotive bodywork, sheet‑metal fabrication and maintenance workshops who require a compact, robust drill for machine‑ or hand‑held drilling operations. The combination of short overall length and high concentricity makes it a reliable choice for precision repair and fabrication tasks. Handling advice and machining recommendations The fully ground Shank and precise geometry support excellent concentricity in chucks and collets. For best performance the Twist Drill benefits from appropriate coolant or lubricant and moderate spindle speeds suitable for HSS tools; avoid aggressive pecking in brittle conditions. Note that ground HSS variants can be more brittle than rolled designs, so the tool performs best under controlled feeds and when clamped securely rather than under extreme impact. Choose the MetavCUT Profi Line Body Drill for reliable, professional metal drilling and contact METAV Werkzeuge for expert advice and technical support — Email: info@metav-werkzeuge.com Phone: +49 2822 7131930 WhatsApp: +49 170 2837271 Technical Data Designation: Body Drill (Karosseriebohrer) Brand: MetavCUT SKU: 59032-FDA Diameter: 3.2 mm Point Angle: 135° Execution: Double‑sided Colour: Black finished without margin Material: HSS‑G Spiral Length: 10 mm Overall Length: 46 mm Shank Execution: Fully ground For Drilling Machine: Drilling Machine / Hand drill compatible Application: Drills for metal Model Series: Profi Line Manufacturer: MetavCUT Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is a Twist Drill used for? The MetavCUT Body Drill (Twist Drill) is mainly applied when machining high‑strength materials and for larger drill diameters; its form allows easy regrinding and it withstands higher loads, making it suitable for precise metalwork and bodyshop holes. Which three drill types exist? Typical distinctions are Metal Drill, Wood Drill and Stone/Concrete Drill; the MetavCUT Body Drill belongs to the metal drill category and is optimised as a Twist Drill for metalworking tasks. Why are Twist Drills point‑ground? Point‑grinding reduces the cross‑cut at the tip of the Twist Drill; by point‑grinding the friction forces are significantly lowered, which reduces required feed forces and improves centring of the tip in the workpiece. Can a metal Twist Drill be used for wood? A metal drill such as the MetavCUT Body Drill can be used in wood, but guidance is worse and the hole finish is less clean; however these drills are easier to regrind and show lower self‑feed compared with specialised wood drills. For which drilling depths is the Twist Drill most commonly used? A through hole in solid material is commonly executed with a Twist Drill. For diameter ranges up to 20 mm and drill depths up to 100 mm the Twist Drill is the most frequently used tool in many workshops. What is better, HSS or HSSE? The common belief that HSSE steels are universally superior to HSS is not correct; the decision should be based on actual working conditions and whether those conditions justify the higher initial cost of HSSE. The MetavCUT Body Drill specified as HSS‑G offers a balance of regrindability and performance for many metalworking tasks.
3.2mm HSS-G Body Drill ,double sided, bright finished - MetavCUT
Body Drill (Twist Drill) — 3.2 mm, 135°, Double-sided, Bright Finished, HSS‑G The Body Drill Twist Drill is a precision metalworking tool designed for Drilling Machines and hand drills, delivering clean, repeatable holes in demanding sheet and plate applications. Double-sided design for extended usability HSS‑G ground geometry for faster, cleaner drilling 3.2 mm diameter for precise small-diameter bores 135° tip angle optimised for harder materials Fully ground shank for excellent concentricity Faster, cleaner holes with ground HSS geometry The Body Drill from MetavCUT uses HSS‑G material and a CNC-ground flute geometry to achieve sharp cutting edges and high running accuracy. This results in cleaner holes and reduced burr formation when drilling metals. The 3.2 mm diameter combined with a 135° tip angle shortens penetration time in harder steels and helps maintain hole geometry. For precision operations, the ground manufacturing method produces a consistently high surface finish, which is particularly beneficial when hole quality matters more than raw removal rate. Double-ended design for practical workshop efficiency A double-sided or double-ended Twist Drill offers practical advantages: when one tip becomes blunt, the drill can be reversed and the other cutting end used, effectively providing two cutting edges in one tool. The fully ground shaft and HSS‑G construction enable up to 40% faster drilling with approximately 50% less feed force compared with conventional HSS drills under the same conditions. These features make the tool well suited to repetitive tasks in sheet metal, where changing tools frequently interrupts workflow and increases downtime. Suited materials and recommended machining guidance The MetavCUT Body Drill is intended primarily for metalworking and performs well in legierte und unlegierte Stähle, Gussstahl, Gusseisen, Sintereisen, Temperguss, Nichteisenmetalle and harder plastics. For best results in tougher alloys, use appropriate coolant and moderate cutting speeds; the 135° tip angle assists centring and reduces wandering on hard surfaces. Because the drill is ground rather than rolled, it offers superior concentricity and a precise hole finish, though care should be taken to avoid excessive shock loading to reduce the risk of breakage. Practical tips, target users and on-site advice Workshop professionals, sheet-metal fabricators and maintenance technicians benefit most from this compact Twist Drill design: its short overall length and robust double-ended layout make it ideal for tight or repeatable operations. When using handheld Drilling Machines, clamp workpieces securely and use cutting fluid for longer tool life. If uncertain whether the MetavCUT Body Drill meets specific production requirements or for guidance on speeds, feeds and coolant, METAV Werkzeuge offers comprehensive technical advice and application support to assist with selection and setup. MetavCUT's Body Drill with HSS‑G ground geometry is recommended for precision metal drilling—contact METAV Werkzeuge for expert guidance at info@metav-werkzeuge.com, by phone +49 2822 7131930 or via WhatsApp +49 170 2837271 Designation: Body Drill (Twist Drill) Brand: MetavCUT SKU: 58032-FDA Diameter: 3.2 mm Tip angle: 135° Spiral length: 10 mm Total length: 46 mm Material: HSS‑G Execution: double sided Colour: bright finished Shank finish: fully ground For machine: Drilling Machine Model series: Standard Line Application: Drills for metal Packaging unit: 10 Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What materials can the MetavCUT Body Drill (Twist Drill) machine effectively cut? The MetavCUT Body Drill designed as a Twist Drill is primarily intended for metalworking and is suitable for alloyed and unalloyed steel, cast steel, cast iron, sintered iron, malleable iron, non‑ferrous metals and hard plastics; users should apply appropriate cutting fluid for best life and hole quality. Is the MetavCUT Body Drill suitable for handheld Drilling Machines? The MetavCUT Body Drill can be used in handheld Drilling Machines, provided the workpiece is securely clamped and feed pressure is controlled; the double-sided design and fully ground shank help maintain concentricity in portable setups. For what is a Twist Drill used? A Twist Drill, such as the MetavCUT Body Drill, is mainly used in the machining of high‑strength materials and for larger hole diameters; its form allows easy regrinding and it withstands higher loads, making it common in bodywork and sheet-metal drilling. Which three drill types are there? There are three principal drill types: metal drills, wood drills and stone/concrete drills; the MetavCUT Body Drill belongs to the metal drill category and is optimised for metalwork. Why are Twist Drills sharpened (pointed)? Sharpening reduces the cross‑cutting edge at the tip of a Twist Drill. By sharpening, frictional forces are significantly lowered, requiring less feed force while improving the drill’s centring in the workpiece. Can a metal drill be used to drill wood? A metal drill like the MetavCUT Body Drill can be used in wood, but guidance and finish are inferior compared with purpose‑made wood drills; metal drills allow easier resharpening and show less self‑feeding tendency. At which drilling depths is the Twist Drill most used? A full‑bore hole is commonly executed with a Twist Drill; for diameters up to 20 mm and drilling depths up to 100 mm, the Twist Drill is the most frequently used tool. Which is better, HSS or HSSE? The general belief that HSSE steels are intrinsically superior to HSS is not universally correct; the higher cost of HSSE must be justified by specific working conditions, so evaluate whether your application requires HSSE before choosing over HSS.
3.2mm HSS-G Twist Drill DIN 1869 ,extra long, bright finished - MetavCUT
Twist Drill — 3.2 mm, Extra Long, HSS‑G Twist Drill (DIN 1869), 135° Point, Bright Finished, Fully Ground Shank The Twist Drill extra long HSS‑G is a precision metal‑working drill designed for deep drilling tasks in demanding materials and for use with drilling machines. Extra‑long design for deep boreholes HSS‑G material for precise, fast metal drilling 135° Point angle for hard materials Fully ground shank for high runout accuracy Bright finished surface for reduced adhesion Outstanding cutting performance with HSS‑G for metalworking The HSS‑G (high‑speed steel, ground) composition provides a clear benefit: a sharper cutting edge and high thermal resistance that supports continuous metal drilling. This design enables up to a 40% faster drilling rate and requires roughly 50% less feed force compared with conventional HSS tools, which reduces operator strain and shortens cycle times. For workshops that value fast, repeatable results, this delivers measurable efficiency while maintaining hole quality. Extra‑long geometry and 135° point for deep, centered holes Featuring a 3.2 mm Diameter, an Overall Length of 155 mm and a Spiral Length of 105 mm, this extra long variant is tailored for deep drilling where standard lengths fall short. The 135° Point Angle improves centring and reduces walking on the surface when entering harder materials, so the tool starts cleanly and progresses steadily. In practice, that means fewer re‑setups and more consistent hole geometry for production and repair work. Clean cuts and precise runout from the fully ground shank A Fully Ground Shank (CNC ground flutes and geometry) yields superior concentricity and very sharp cutting lips compared with rolled counterparts. The Bright‑Finished surface reduces material adhesion and aids chip evacuation. Ground drills can be more brittle, so their best use is in controlled conditions with sufficient cooling or in stationary drilling machines; under those conditions they produce very accurate, burr‑reduced holes in metals. Optimised for metal: applications and target users Compliant with DIN 1869, this Twist Drill is aimed at professional metalworkers, toolrooms and industrial maintenance teams who drill alloyed and unalloyed Steel, Cast Iron, Sintered Iron, Non‑Ferrous Metals and hard Plastics. The tool’s combination of extra length, hardened geometry and a 135° point makes it especially suitable for deep boreholes and challenging components that demand repeatable precision rather than general woodworking use. For precision deep‑hole metalwork, choose the MetavCUT extra‑long Twist Drill and contact METAV Werkzeuge for expert, personal advice: 📧 info@metav-werkzeuge.com ☎️ +49 2822 7131930 ✔️ WhatsApp +49 170 2837271 Designation: Twist Drill Brand: MetavCUT SKU: 32032-FDA Diameter: 3.2 mm Overall Length: 155 mm Spiral Length: 105 mm Point Angle: 135° Execution: Extra Long Shank Execution: Fully Ground Material: HSS‑G Finish/Colour: Bright Finished Suitable For: Drilling Machine Application: Drills for Metal Model Series: Standard Line Norm: DIN 1869 Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the Twist Drill by MetavCUT used for? The Twist Drill from MetavCUT is primarily applied to the machining of high‑strength materials and larger diameters; its extra long design and ground geometry make it suitable for deep boreholes and for work in alloyed and unalloyed Steel, Cast Iron and similar metals. The shape is easy to re‑grind and withstands higher loads. Which three drill types exist and how does the MetavCUT Twist Drill fit in? Common drill categories are Metal Drills, Wood Drills and Stone/Concrete Drills. The MetavCUT Twist Drill belongs to the Metal Drill family and is optimised for metallic materials rather than timber or masonry. Why are Twist Drills sharpened (ausgespitzt)? The sharpening reduces the cross‑cutting edge at the tip of the Twist Drill, which lowers friction and therefore requires less feed force; sharpening also improves tip centring in the Workpiece and enhances overall drilling accuracy. Can the MetavCUT Twist Drill be used to drill wood? A Metal Drill such as the MetavCUT Twist Drill can be used in wood, but guidance and finish will be inferior compared to a dedicated Wood Drill. Metal drills offer easier re‑grinding and lower self‑feed action, yet they provide less precise guidance and a rougher hole in timber. At what drilling depths is a Twist Drill most commonly used? A solid‑material bore is typically produced with a Twist Drill. For diameters up to 20 mm and drilling depths up to 100 mm, the Twist Drill is the most frequently used tool; the extra long MetavCUT variant extends that capability for deeper holes. What is better, HSS or HSSE for my application with a MetavCUT Twist Drill? There is no universal superiority of HSSE over HSS. Evaluate working conditions carefully: HSSE can be advantageous under specific high‑temperature or sticky material situations but may not justify the higher cost for standard steel drilling. Choose the MetavCUT HSS‑G grade when sharp cutting and precise holes are the priority.
3.2mm HSS-G Twist Drill DIN 1869 ,extra long, bright finished - MetavCUT
Kompakt, leistungsfähig und für tiefe Metallbohrungen ausgelegt: Der geschliffene HSS‑G Spiralbohrer mit 3,2 mm Durchmesser und extra langer Bauform ermöglicht präzise, saubere Bohrlöcher in legiertem und unlegiertem Stahl bis 1000 N/mm² und reduziert die Anpresskraft um bis zu 50 % bei einem bis zu 40 % schnelleren Vorschub; für Einkauf und technische Beratung direkt bei Metav anfragen Spiralbohrer 3,2 mm (MetavCUT Standard Line) Der Spiralbohrer in extra langer Ausführung für präzise Metallbohrungen und tiefe Sacklochbohrungen Extra lange Bauform 200 mm Gesamtlänge Geschliffene HSS‑G Geometrie für saubere Bohrlöcher Für Stahl bis 1000 N/mm² geeignet Spirallänge 135 mm für tiefe Bohrungen Spitzenwinkel 135° für harte Werkstoffe Höhere Produktivität durch geschliffene HSS‑Geometrie Die HSS‑G Ausführung sorgt für sehr scharfe Schneidkanten und hohe Rundlaufgenauigkeit, was saubere und wiederholbare Bohrungen in Metall ermöglicht. Durch den CNC‑Schliff entsteht eine Geometrie, die den Spanabtransport unterstützt und so das Vorschubverhalten verbessert; das Ergebnis ist ein spürbar schnellerer Arbeitsfortschritt bei gleichzeitig geringerem Kraftaufwand. Dieses Merkmal reduziert Nacharbeit und erhöht die Effizienz in Werkstatt und Produktion. Extra lange Bauform für schwer zugängliche Stellen Mit einer Gesamtlänge von 200 mm und 135 mm Spirallänge eignet sich der Bohrer speziell für tiefe Bohrungen oder beschränkte Zugänglichkeit. Anwender profitieren davon, weil weniger Zwischenschritte und Aufbohrvorgänge nötig sind; das spart Rüstzeit und minimiert Fehlerquellen beim Positionieren. Die extra lange Bauform ist damit besonders nützlich bei Instandsetzungsarbeiten und beim Bohren in Baugruppen. Praxiseinsatz im Standard‑Bereich für Metall Der Durchmesser von 3,2 mm ordnet den Bohrer dem Standard‑Bereich zu und macht ihn ideal für allgemeine Werkstattarbeiten, Montage und DIY‑Projekte in Metall. Für saubere Ergebnisse empfiehlt sich bei hoher Präzision das Anpunkten mit einem Zentrierbohrer und der Einsatz von Kühlschmierstoff bei längeren Bohrungen. Diese Vorgehensweise verlängert die Lebensdauer und verhindert Überhitzung bei anspruchsvollen Werkstoffen. Materialverträglichkeit und Anwendungshinweise Dank der Kombination aus HSS‑G Material und Spitzenwinkel 135° ist der Bohrer geeignet für legierten und unlegierten Stahl, Gussstahl, Gusseisen sowie Nichteisenmetalle und Hartkunststoff. Aufgrund der geschliffenen Ausführung empfiehlt sich die Nutzung in stationären oder leistungsfähigen Handmaschinen mit Kühlung, um erhöhte Standzeiten zu erzielen. Die konstruktive Auslegung nach DIN 1869 unterstützt reproduzierbare Fertigungsprozesse. Verpackung, Serie und Zielgruppe Als Teil der Standard Line von MetavCUT wird der Bohrer in praktischer Verpackungseinheit geliefert und richtet sich an Handwerk, Industrie und versierte Heimwerker, die tiefe und präzise Bohrungen in Metall benötigen. Die Kombination aus Materialwahl, Geometrie und Abmessungen macht das Werkzeug zur zuverlässigen Wahl für Werkstätten, Montagebetriebe und Instandhaltungsabteilungen. Empfehlung: Metav empfiehlt die MetavCUT HSS‑G Ausführung für anspruchsvolle Tiefbohrungen in Metall — für Bestellung und persönliche Fachberatung schreiben an info@metav-werkzeuge.com oder telefonisch unter +49 2822 7131930 Produktmerkmale Artikelnummer: 33032-FDA Marke: MetavCUT Serie: Standard Line Bezeichnung: Spiralbohrer Ausführung: extra lang Daten Durchmesser: 3,2 mm Gesamtlänge: 200 mm Spirallänge: 135 mm Spitzenwinkel: 135° Verpackungseinheit: 10 Besonderheiten Material: HSS-G Norm: DIN 1869 Schaftausführung: geschliffen Farbe: blank Für Bohrmaschine: Handbohrmaschine FAQ Für welche Werkstoffe eignet sich der Bohrer besonders gut? Der MetavCUT Spiralbohrer in HSS‑G Ausführung eignet sich besonders für legierten und unlegierten Stahl, Gussstahl, Gusseisen sowie Nichteisenmetalle und Hartkunststoff; durch den Spitzenwinkel von 135° sind auch härtere Werkstoffe gut bearbeitbar. Ist die extra lange Ausführung für Handbohrmaschinen geeignet? Die extra lange Ausführung wurde für tiefe Bohrungen konzipiert und kann mit leistungsfähigen Handbohrmaschinen verwendet werden; bei längeren Einsätzen und harten Werkstoffen empfiehlt sich jedoch eine stationäre Maschine und Kühlung. Wie verbessert der CNC‑Schliff die Bohrergebnisse? Der geschliffene Schaft und die präzise Geometrie führen zu sehr scharfen Kanten und besserem Rundlauf, wodurch Bohrlöcher sauberer ausfallen und die Spanabfuhr effizienter funktioniert; das reduziert Nacharbeit und erhöht Standzeit. Welche Vorteile bietet die Tieflochspirale laut DIN 1869? Die Tieflochspirale unterstützt den Spanabtransport bei extra tiefen Bohrungen und reduziert das Verstopfungsrisiko, wodurch zuverlässig präzise Bohrungen auch unter erschwerten Bedingungen möglich sind. Wie ist der Bohrer verpackt und wie viele Stück sind in einer Einheit? Der Bohrer wird in der Verpackungseinheit von 10 Stück geliefert, was sich für Werkstätten und Produktionsumgebungen eignet, die mehrere Werkstücke bearbeiten oder Ersatz vorrätig halten wollen.
High-performance drill bits for demanding production
Drill bits designed for industrial manufacturing where precision, repeatability and tool life are decisive. Based on a spectrum from HSS and kobalt-alloyed hss-e for universal use to solid carbide drills for high-speed, high-precision serial production, this range covers applications from general engineering to automotive supplier work.
Why these drill bits are essential in the workshop and on the machining centre
Function and behaviour:
- primary use: creating accurate cylindrical holes
- typical machines: CNC machining centres, lathes and drill presses
- key design aspects: optimised chisel edge, defined point angles, flute geometry for reliable chip evacuation
Technical advantages and process benefits:
- reduced feed forces through optimised point geometry
- improved heat control with advanced coatings and, where specified, internal coolant supply
- extended tool life using solid carbide variants and multilayer coatings such as TiN / TiAlN
- process security on challenging materials thanks to tailored materials and geometries
Concrete benefits that boost productivity and quality
- predictable tool life and fewer tool changes, lowering machine downtime
- stable hole quality and consistent tolerances across long runs
- efficient chip control and thermal management for safe deep-hole and hardened-material drilling
- suitability across a wide material range, reducing the need for multiple specialised tools
Metav as a reliable partner for high-precision tooling
Metav combines decades of sector expertise with a broad, dependable offering from its Emmerich facility. With over 48,000 customers and more than 250,000 products, Metav positions its range of drill bits, twist drills and indexable drills as a practical, quality-first choice for procurement managers and production engineers seeking dependable supply and technical competence.
Technical data (at a glance)
- material: HSS, kobalt-alloyed hss-e, solid carbide
- coatings: TiN, TiAlN, advanced nanocoatings
- coolant option: internal coolant feed where specified
- typical applications: mild steel, high-alloy stainless steel, cast iron, non-ferrous metals, technical plastics, hardened materials (use solid carbide variants)
- tool types available: twist drills, solid carbide drills, indexable drills, centre and pilot drills, step drills
FAQ
What is the difference between hss and solid carbide drill bits?
HSS drill bits offer toughness and resistance to breakage for general machining, while solid carbide drills provide higher wear resistance and are the preferred choice for high-speed, high-volume machining and hardened materials.
Which coatings improve tool life for industrial drilling?
Coatings such as TiN and TiAlN increase surface hardness and thermal stability; when combined with the correct drill geometry and, if available, internal coolant, they significantly extend the service life of drill bits.
Can these drill bits be used on CNC machining centres for deep holes?
Yes. Drill bits designed with optimised flute geometry and internal coolant supply are suited to deep-hole machining on CNC machining centres, ensuring controlled chip evacuation and heat management.
How should I choose between twist drills, solid carbide drills and indexable drills?
Select twist drills for general-purpose drilling, solid carbide drills for high-speed and hardened-material applications, and indexable drills for large-diameter holes where insert changes offer economic advantages.
Why choose Metav for drill bits and drilling solutions?
Metav offers a comprehensive selection of drill bits, twist drills and indexable drills combined with sector expertise, centralised supply from Emmerich and proven reliability across thousands of industrial customers.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com