High-precision drills for reliable, high-throughput metalworking
Drills provide the fundamental rotating cutting solution for producing accurate cylindrical holes in materials such as structural steel, high-alloy stainless steel, cast iron, non-ferrous metals and engineering plastics, delivering consistent hole quality and extended tool life in CNC machining and turning centres. This category covers everything from classic twist drill made from high-speed steel for general machining to solid carbide drill optimised for high cutting speeds and long run times, offering advanced coatings and internal coolant options for improved heat management. By using optimised point geometries and split points the tools reduce thrust, prevent walking at the start of the cut and ensure superior surface finish, which benefits sectors from general mechanical engineering to automotive component manufacture.
3.7mm HSS Twist Drill DIN 338 ,short, roll forged, black, Type N - MetavCUT
Twist Drill — Type N short HSS drill, 3.7 mm, 118°, black, DIN 338 The Twist Drill Type N is a short HSS metalworking drill designed for precision drilling in steel and non-ferrous metals using a compatible Drilling Machine. Short HSS design for stable drilling Conforms to DIN 338 for short twist drills 118° tip for improved centring on curved surfaces Type N normal spiral optimized for metalworking Flute length 39 mm and overall length 70 mm for rigidity Exceptional material performance for demanding metalwork This short HSS Twist Drill with a diameter of 3.7 mm delivers high wear resistance and toughness for standard metal drilling tasks. Made from High Speed Steel, the bit is manufactured to provide elasticity that reduces breakage risk when drilling holes below 6 mm. The HSS composition supports reliable cutting in alloyed and unalloyed steel, cast iron, non-ferrous metals and many plastics while allowing easier resharpening compared with coated alternatives. The compact geometry reduces vibration and ensures consistent hole quality. Built for stability and machine compatibility Conforming to DIN 338, this short Twist Drill is specified for use with a cylindrical shank on rotating stationary or portable machines. The Type N normal spiral is the classic geometry for metal and steel applications and therefore well suited to a wide range of Drilling Machines. The 118° point angle eases initial penetration and improves centring on slightly curved or work-hardened surfaces; for harder materials, a different point geometry may be preferred. The combination of Flute Length 39 mm and Overall Length 70 mm minimises overhang and reduces the risk of deflection during operation. Who benefits and where to use it Workshops, maintenance technicians and professionals who require reliable standard metal drills will find this short Twist Drill particularly useful for precision tasks. Its compact length makes it ideal for confined setups and for maintaining concentricity in deep or blind-hole drilling up to moderate depths. For users uncertain about compatibility with specific machines or materials, METAV Werkzeuge offers expert guidance to match the drill to the task and tooling. Practical advantages: handling, resharpening and life cycle The short design increases stiffness and improves hole accuracy while simplifying handling in jigs and fixtures. The Type N spiral is straightforward to regrind, extending service life and lowering total tooling cost for frequent users. Because the point geometry reduces the cross-cut area at the tip, cutting forces and friction are decreased, which in turn reduces required feed forces and improves centring during start-up. For routine maintenance and professional use, this drill strikes a balance between performance and long-term economy. We recommend the MetavCUT Twist Drill Type N for reliable, precise metalworking; for personalised advice or additional technical data contact METAV Werkzeuge by email at info@metav-werkzeuge.com, by phone at +49 2822 7131930 or via WhatsApp at +49 170 2837271 Twist Drill Marke: MetavCUT SKU: 40037-FDA Diameter: 3.7 mm Tip angle: 118° Execution: short Material: HSS (High Speed Steel) Standard: DIN 338 Type: Type N For Drilling Machine: Drilling Machine Flute Length: 39 mm Overall Length: 70 mm Colour: black Application: Drills for metal Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the Twist Drill Type N used for and which materials suit it best? The MetavCUT Twist Drill Type N is primarily used for drilling metal; it is especially applied when machining alloyed and unalloyed steel, cast iron, non-ferrous metals and many plastics. The short HSS design makes it robust for standard metalworking tasks and reduces breakage risk on smaller diameters. Which three drill types exist and how does the Twist Drill fit in? Common drill categories are metal drills, wood drills, and masonry/concrete drills. The MetavCUT Twist Drill Type N belongs to the metal-drill group, offering the classic normal spiral geometry optimised for steel and similar materials.
3.7mm HSS-E Twist Drill DIN 338 ,short, 5% cobalt-alloyed, Type N - MetavCUT
Twist Drill — Type N, Diameter 3.7 mm, 135° Point Angle, Short Execution, 5% Cobalt-Alloyed, HSS‑E, DIN 338, Fully Ground Shaft (Standard Line) by MetavCUT The Twist Drill is a short Type N metal drill designed for precise drilling in hard materials with a 135° point angle and a 3.7 mm diameter, ideal for use in a Drilling Machine. Short design for greater stability and precision HSS‑E with 5% cobalt for higher heat resistance Fully ground shaft for excellent runout accuracy Conforms to DIN 338 for short twist drills Optimised for metal drilling and hard materials Precision and stability for demanding metalwork The short Twist Drill design reduces overhang and vibration, which directly improves drilling accuracy and tool life. Because the protruding length is smaller, the drill resists bending and chatter, making it especially suitable for precise holes in steel and other hard materials. This short execution is therefore recommended when high concentricity and repeatable results are required in metalworking tasks. Material technology that extends performance Manufactured from HSS‑E and alloyed with 5% cobalt, the drill offers increased hot hardness and wear resistance compared with conventional high-speed steels. The 135° point angle is selected to ease penetration into tough materials and to lower the tendency for the tip to wander. For users unfamiliar with these terms: HSS‑E is a high-speed steel with cobalt additive that maintains hardness at elevated temperatures, while a larger point angle reduces cutting stress on stainless and alloy steels. Ground geometry for cleaner holes and reliable guidance This MetavCUT twist drill is fully ground, meaning the flute geometry and cutting edges are produced by CNC grinding rather than roll forming. The result is sharper cutting lips, improved roundness of holes and a better surface finish in the workpiece. For workshop operators this translates into fewer rework steps and less time spent deburring. The Type N spiral (normal helix) provides a balanced chip evacuation for many metal applications. Conformity and recommended uses Being manufactured to DIN 338 as a short twist drill, this tool is optimised for drilling in alloyed and unalloyed steel, cast iron, non-ferrous metals and many plastics. The short length and robust material composition make it well suited for stationary and portable Drilling Machines when coolant is applied for deep cuts or harder alloys. For diameters under 6 mm the rolled HSS variant can reduce breakage risk in some settings, but the ground HSS‑E offers superior hole quality for precision work. Strong recommendation: Choose the MetavCUT Twist Drill for precise metal drilling tasks where stability and hole quality matter most — METAV Werkzeuge offers expert advice and technical support to ensure the right tool choice for your application. For assistance contact METAV Werkzeuge: info@metav-werkzeuge.com / +49 2822 7131930 / WhatsApp +49 170 2837271 Technical information Designation: Twist Drill Brand: MetavCUT SKU: 47037-FDA Diameter: 3.7 mm Point Angle: 135° Type: Type N Material: HSS‑E Execution: Short Colour/Alloy: 5% cobalt-alloyed Shaft Execution: Fully ground Spiral Length: 39 mm Overall Length: 70 mm Intended For: Drilling Machine Application: Drills for metal Model Series: Standard Line Norm: DIN 338 Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the Twist Drill from MetavCUT best used for? The MetavCUT Twist Drill is primarily used for metalworking: it is designed to drill high-strength materials and larger diameters where stability and precise guidance are required; its short design and material composition allow it to withstand higher stresses during drilling. Can the MetavCUT Twist Drill be used in a handheld drill? The Twist Drill is optimised for Drilling Machines and stationary setups for best results, but it can be used in handheld machines for lighter tasks; however, stable clamping and appropriate feed control are recommended to avoid breakage and to maintain hole quality. What are Twist Drills used for? Twist Drills are mainly applied when machining high-strength materials and larger drill diameters. Their shape allows relatively easy regrinding and they withstand higher loads, making them suitable for demanding metal drilling operations. Which three drill types exist? The three common drill types are: Metal Drill, Wood Drill, and Stone/Concrete Drill. Why are Twist Drills sharpened (pointed)? Pointing reduces the cross-cut at the tip of the Twist Drill, which significantly lowers friction and thus the feed forces required; at the same time the pointed tip centres the drill more accurately in the workpiece. Can you use a metal drill in wood? A metal drill can be used in wood, but guidance may be inferior and the hole finish less clean; metal drills are easier to re-sharpen and have less self-feed, so they behave differently compared with wood-specific bits. For which hole depths is the Twist Drill most commonly used? Twist Drills are the standard tool for through-holes; they are most commonly used for diameters up to 20 mm and drilling depths up to 100 mm, making them the go-to choice for many machining tasks.
3.7mm HSS-G Body Drill ,double sided, bright finished - MetavCUT
Body Drill (Karosseriebohrer) — double-sided HSS-G, 3.7 mm, 135° The Body Drill (Karosseriebohrer) is a double-sided Twist Drill for hand Drilling Machines, designed for precise metalworking and sheet-metal applications with a 3.7 mm diameter and a 135° tip angle. Double-ended design for extended usability HSS-G ground geometry for clean metal holes Reduced feed force and faster drilling performance Bright finished surface for smooth chip evacuation High-efficiency cutting for hard materials The HSS-G ground construction of this Body Drill combines sharp cutting edges with high concentricity, enabling clean, precise holes in a variety of Metals. With a 135° tip angle the drill reduces walking and improves entry in harder materials such as stainless steel and alloyed steel. The fully ground flute geometry produces consistent chips and surface finish, which benefits users who require repeatable, high-quality results. Practical advantage of a double-sided design Thanks to the double-sided execution the tool works like two drills in one: when one tip becomes dull it can be reversed and the other end used, extending the service life in daily workshop use. This shorter, robust format is particularly suited for bodywork and thin-sheet drilling where stability and the option to flip the drill increase uptime. Operators will notice lower downtime and fewer tool changes during repetitive tasks. Optimised handling and recommended operating practice The fully ground shank and flute geometry deliver high roundness and dimensional accuracy, improving guidance in hand Drilling Machines. For best results when drilling tough or heat-sensitive materials, apply appropriate cooling and moderate cutting speeds to avoid embrittlement. Because ground HSS can be harder and more brittle than rolled versions, stationary use with coolant is recommended for sustained durability. Suited users and typical applications This Body Drill is targeted at Automotive Body Shops, Maintenance Technicians and metalworking professionals who need reliable, precise holes in thin to medium-thickness metals. Typical applications include sheet-metal assembly, rivet and fixture preparation and general metal fabrication. The tool is especially effective where clean hole quality and quick tool replacement by flipping the drill are priorities. For professional workshop results choose the MetavCUT Body Drill with HSS‑G ground geometry — and contact METAV Werkzeuge for expert advice and tailored technical support: 📧 info@metav-werkzeuge.com ☎️ +49 2822 7131930 ✔️ WhatsApp +49 170 2837271 Technical Information Designation: Karosseriebohrer / Body Drill Brand: MetavCUT SKU: 58037-FDA Diameter: 3.7 mm Tip angle: 135° Execution: double-sided Colour: bright finished Material: HSS-G Shaft execution: fully ground Total length: 55 mm For drilling machine type: Drilling Machine (Handbohrmaschine) Model series: Standard Line Application: Drills for metal / Bohrer für Metall Packaging unit: 10 Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ For what are Twist Drills used? The Body Drill (Karosseriebohrer) from MetavCUT is a type of Twist Drill primarily applied to machining high-strength materials and larger drill diameters; its form allows for straightforward regrinding and it withstands higher loads, making it suitable for demanding metalworking tasks. Which 3 drill types exist? When choosing tools, consider the main categories: Metal drills (such as the MetavCUT Body Drill), Wood drills and Masonry/Concrete drills, each optimised for the specific material and drilling method.
3.7mm HSS-G Twist Drill DIN 1897 ,extra short, bright finished, Type N - MetavCUT
Twist Drill — Type N · 3.7 mm · 135° Tip · Extra Short · Bright Finished · HSS‑G · DIN 1897 The Twist Drill is an extra‑short Type N drill for Drilling Machines, designed for stable, precise metalworking in confined spaces. Extra‑short design for superior stability 135° tip for harder materials and faster entry HSS‑G material for high wear resistance Cylindrical shank for universal chuck compatibility DIN 1897 standard ensures industrial reliability Faster, more stable drilling in limited spaces The Extra‑Short design reduces flex and the risk of breakage, producing more stable cutting when working in tight or thin components. Because the overall length and flute length are shortened, the cutting forces focus more directly at the tip; this means improved concentricity and less vibration during use. For metalworking tasks where access is limited, the compact geometry offers a practical advantage while maintaining tool life and reliability. Optimised geometry for harder materials Equipped with a 135° tip, this Type N drill is optimised for drilling harder metals such as stainless steel. A larger tip angle reduces the initial bite and shortens lead‑in time, lowering the required thrust and improving centring. For customers unfamiliar with tip geometry: the tip angle influences how aggressively the drill cuts and how well it self‑centres; 135° is commonly chosen for tougher, less ductile materials. High‑speed steel G grade for durable performance Manufactured from HSS‑G, the Twist Drill combines toughness with thermal resistance suitable for continuous metal drilling. Compared with standard HSS, the ground geometry enables up to 40% faster drilling with around 50% less feed force in many cases. This characteristic is particularly beneficial when working on alloys, cast steels, and non‑ferrous metals where consistent cutting performance and regrindability matter. Practical compatibility and application scope The cylindrical shank makes the tool universally compatible with standard three‑jaw chucks on Hand and Angle Drilling Machines. While the round shank is ideal for general clamping, operators should note that very high torque applications may require alternative shank types to avoid slippage. Intended primarily as a metalworking tool, the drill excels in thin materials such as sheets, profiles and plate where a short, stiff geometry is advantageous. Target users and workshop recommendation Designed for professionals and advanced hobbyists tackling precision metal fabrication, the drill suits those needing a compact, resilient cutting tool for confined assemblies and maintenance tasks. The Standard Line model offers dependable repeatability for production or repair work, and its classic Type N flute form provides familiar handling and easy regrinding for workshops that maintain their own tooling. Strong recommendation: Choose the MetavCUT Extra‑Short Twist Drill for demanding metal drilling tasks — for personalised advice or detailed technical data contact METAV Werkzeuge by eMail at info@metav-werkzeuge.com, by phone +49 2822 7131930 or via WhatsApp +49 170 2837271 Twist Drill Brand: MetavCUT SKU: 56037-FDA Diameter: 3.7 mm Tip Angle: 135° Type: Type N Finish: Bright finished Execution: Extra Short Material: HSS‑G Standard: DIN 1897 Suitable for: Drilling Machine (Hand drilling machines and angle drills) Spiral Length: 20 mm Overall Length: 52 mm Shank: Cylindrical Model Series: Standard Line Application: Drills for metal Colour: Bright finished Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the Twist Drill used for and which materials suit it best? The MetavCUT Twist Drill Type N is primarily used for machining high‑strength materials and larger diameters in metalworking. Its extra‑short form is especially useful for drilling thin sheets and profiles, and the HSS‑G grade and ground geometry make it suitable for alloyed and unalloyed steel, cast steel, cast iron and non‑ferrous metals. Which three drill types exist? The main categories of drill bits are metal drills, wood drills and masonry/concrete drills, each optimised for the respective material properties and cutting requirements.
3.7mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Twist Drill — Short Type N, Ø 3.7 mm, 135° tip, Bright finished, HSS‑G, DIN 338 (MetavCUT) A short Twist Drill (Type N) for Drilling Machines that excels in metalworking and precision tasks. Short HSS‑G Twist Drill for hard metals 135° tip for improved entry in stainless steel Fully ground shank for high stability and precision Conforms to DIN 338 for short twist drills Faster metalworking with lower feed force The HSS‑G construction combines hardness and toughness, enabling up to 40% faster drilling and requiring around 50% less feed force compared with conventional HSS bits. This advantage reduces operator fatigue during extended runs and lowers the mechanical load on handheld Drilling Machines. The short design minimises overhang, improving stability and reducing deflection, which is particularly valuable when working with legated and unlegated Steel or Cast Iron. Stable, precise holes in demanding materials Equipped with a 135° point angle, this short Type N bit is optimised for harder materials such as Stainless Steel, where a flatter point shortens the initial breakthrough and improves concentricity. The fully ground shank and flute geometry ensure reliable chip evacuation and repeatable centring, so fewer re‑drills are necessary and part quality is maintained. Explanation: a larger point angle distributes cutting forces and delays work hardening on the surface. Built to DIN 338 for workshop reliability Manufactured to DIN 338, the geometry and dimensions follow the standard for short Twist Drills with cylindrical shanks, allowing predictable performance across batches. This standardisation simplifies tool selection for workshops and ensures compatibility with common tool holders. The Basic Line model focuses on practical robustness rather than cosmetic frills, delivering straightforward performance for professional metalworking environments. Where this drill bit adds the most value The product is designed for precision tasks on metal: steel, cast materials, sintered iron and certain hard plastics. Its shorter length improves handling in tight fixtures and reduces chatter in portable Drilling Machines. For users seeking a reliable, easy‑to‑regrind solution for medium to heavy duty holemaking, this Twist Drill offers a practical balance between cutting speed and tool life, making it suitable for production and maintenance applications. Strong recommendation: Choose the MetavCUT HSS‑G short Twist Drill for demanding metal drilling operations; for tailored technical advice and help selecting the right configuration contact METAV Werkzeuge — Email: info@metav-werkzeuge.com │ Phone: +49 2822 7131930 │ WhatsApp: +49 170 2837271 Technical Specifications Designation: Twist Drill (Short) Brand: MetavCUT SKU: 27037-FDA Diameter: 3.7 mm Total length: 70 mm Spiral length: 39 mm Tip angle: 135° Type: Type N (Normal spiral) Material: HSS‑G Shank finish: Fully ground Surface: Bright finished Intended for: Drills for metal / Bohrer für Metall Conforms to: DIN 338 Model series: Basic Line Shaft execution: geschliffen Application machine: Drilling Machine / Handbohrmaschine Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What are Twist Drills used for? Twist Drills like the MetavCUT Twist Drill are primarily applied to machining high‑strength materials and larger hole diameters. Their geometry makes them straightforward to regrind and capable of withstanding significant loads, so they are well suited for drilling in alloyed and unalloyed Steel, Cast Steel, Cast Iron and hard Plastics. Which 3 drill types are there? There are three common drill categories: Metal drills, Wood drills, and Stone/Concrete drills. These groups reflect typical geometries and point designs optimised for the respective material families. Are you unsure whether this Twist Drill fits specific requirements or need complementary technical data? METAV Werkzeuge offers comprehensive and competent consultation — contact via info@metav-werkzeuge.com, call +49 2822 7131930 or WhatsApp +49 170 2837271.
3.7mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Twist Drill (Type N) — Short HSS‑G, 3.7 mm, 135° Tip, Bright Finished by MetavCUT A Twist Drill (Type N) for precision metal drilling, engineered as a short, bright finished HSS‑G tool for use in handheld Drilling Machines and stationary equipment. Short design for improved stability Ground HSS‑G for sharp edges and clean holes 135° tip for harder materials and reduced burrs Fully ground shank for precise concentricity Maximum precision and proven material technology for metalworking The short design combines a HSS‑G ground geometry with the stability benefits of reduced overhang, delivering more consistent concentricity and less deflection. Conforming to DIN 338, this construction provides sharp cutting edges and high runout accuracy; the ground flutes produce clean, burr‑reduced holes in demanding alloys. One direct advantage is faster drilling progress in hard materials compared with conventional rolled drills, making the tool suitable where repeatable precision is required. Best suited applications and machine compatibility Designed primarily as a metalworking tool, the short Type N geometry excels in drilling alloyed and unalloyed steel, cast steel, cast iron, sintered iron, non‑ferrous metals and hard plastics. The 135° tip reduces initial cutting forces and improves centring in tougher workpieces, while the compact overall length and 39 mm spiral length lower vibration when used in handheld Drilling Machines or on stationary machines. This configuration supports precise hole placement and reduces the risk of wander on hard surfaces. Handling advice and operating recommendations for longer tool life A fully ground shank and precise flute geometry allow secure clamping and accurate runout; use of appropriate coolant and moderate cutting speeds extends tool life and mitigates brittleness inherent to ground HSS variants. The 70 mm overall length and short overhang favour operations with limited reach and high rigidity; where deep holes or interrupted cuts are required, ensure suitable pecking cycles and stable fixturing. If regrinding is needed, the ground form enables straightforward sharpening while maintaining the original cutting geometry. Choose the MetavCUT short HSS‑G Twist Drill for precise, stable metal drilling — for technical questions or personalised advice METAV Werkzeuge provides expert consultation: info@metav-werkzeuge.com • +49 2822 7131930 • WhatsApp +49 170 2837271 Technical Information Designation: Twist Drill Brand: MetavCUT SKU: 45037-FDA Type: Type N Diameter: 3.7 mm Tip angle: 135° Material: HSS‑G Execution: short Colour / Finish: bright finished Shank finish: fully ground Spiral length: 39 mm Overall length: 70 mm Model series: Standard Line Application: Drills for metal For drilling machine: Drilling Machine Norm: DIN 338 Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the primary use of the Twist Drill (Type N) from MetavCUT? The MetavCUT Twist Drill (Type N) is mainly used for machining high‑strength materials and larger drill diameters; its ground geometry and short design make it particularly suitable for precise work in metals where clean holes and high accuracy are required. Which three drill types exist and where does the MetavCUT Twist Drill fit? Commonly distinguished drill types are metal drills, wood drills and stone/concrete drills; the MetavCUT Twist Drill is a metal drill optimised for steel and similar materials. Why are Twist Drills sharpened at the tip? The tip sharpening reduces the cross‑cutting edge at the point, which lowers friction and required feed forces; this improves centring and reduces the operator's effort when using the MetavCUT Twist Drill. Can metal drills be used in wood with the MetavCUT Twist Drill? Metal drills like the MetavCUT Twist Drill can be used in wood, but guidance and finish are typically inferior compared with wood‑specific bits; however, metal drills are easier to re‑sharpen and show less aggressive self‑feed.
3.7mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Twist Drill Profi Line (Type N) – 3.7 mm · 135° Tip · Short · Bright Finished · DIN 338 · HSS‑G The Twist Drill Profi Line is a short Type N metal drill designed for precision drilling in hard materials on drilling machines and hand drills. Short design for increased stability and precision HSS‑G ground geometry for faster, cleaner holes 135° tip angle suited for hard materials Fully ground shank for improved runout accuracy Conforms to DIN 338 for standardised short drills High performance for demanding metalworking with measurable gains The short construction and HSS‑G CNC ground geometry deliver higher stability and precision when machining metal. The reduced overhang minimises bending and chatter, allowing a worker to drill with up to 40% faster advance and requiring about 50% less feed force compared with conventional HSS designs. The result is cleaner holes and reduced rework in applications such as alloyed and unalloyed steel, cast steel and hard plastics. Short design and Type N spiral for reliable centring and durability A shorter overall length means less lateral flex and better concentricity; combined with the Type N normal spiral this design provides dependable chip evacuation for metalworking. The drill is manufactured to DIN 338, the standard for short twist drills with a cylindrical shank, so workshop planning and holder compatibility are simplified. The fully ground flutes produce sharp cutting edges and high roundness, which favours accurate, repeatable holemaking. Suited applications and user groups — who benefits most Craftsmen, maintenance technicians and precision workshops benefit from this short 3.7 mm configuration for controlled drilling in tougher materials. Typical uses include machining on drilling machines, repair work and toolroom operations where small diameters and deep accuracy are required. The combination of short spiral length and 135° point angle reduces walking on start-up and improves performance when penetrating hard surfaces such as stainless steel. Usage tips to extend tool life and ensure best results For best results use adequate coolant and moderate spindle speeds matched to the material; the 135° point reduces entry forces but may require slower speeds on softer metals to avoid work hardening. Because CNC‑ground HSS tools can be slightly more brittle than rolled versions, avoid excessive shock loading and prefer stationary or machine drilling with steady feed. Regrinding is possible; the geometry allows straightforward resharpening while maintaining centring behaviour. Choose the MetavCUT Profi Line short HSS‑G Twist Drill for precision metalworking and contact METAV Werkzeuge for expert support — Email: info@metav-werkzeuge.com · Phone: +49 2822 7131930 · WhatsApp: +49 170 2837271 Designation: Twist Drill Brand: MetavCUT SKU: 48037-FDA Model series: Profi Line Type: Type N Diameter: 3.7 mm Overall length: 70 mm Spiral length: 39 mm Tip angle: 135° Material: HSS‑G Shank: Fully ground Finish: Bright finished Execution: Short For drilling machine: Drilling Machine / Hand drill Norm: DIN 338 Application: Drills for metal Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What materials is the Twist Drill Profi Line suitable for? The MetavCUT Twist Drill Profi Line is optimised for metalworking; its HSS‑G ground geometry and 135° tip make it particularly effective on alloyed and unalloyed steel, cast steel, gusseisen and hard plastics, providing clean holes and reduced tool wear under appropriate speeds and coolant. For what is a Twist Drill primarily used? A Twist Drill is mainly applied to the machining of high‑strength materials and larger drill diameters. The short, ground form is easy to resharpen and withstands high loads, making it suitable for demanding metalworking where stability and precision are required. Which three drill types exist? Commonly distinguished drill types are metal drills, wood drills and stone/concrete drills, each engineered for the specific material properties they encounter.
3.8mm HSS Twist Drill DIN 338 ,short, roll forged, black, Type N - MetavCUT
Twist Drill — Type N, 3.8 mm, 118°, Short, Black, DIN 338, HSS (MetavCUT) A Twist Drill in short HSS design for precision metal drilling with Drilling Machines and hand drills. Short HSS Twist Drill Type N 3.8 mm 118° tip for reliable centring Flute length 43 mm for deep metal holes DIN 338 standard for short drills Suitable for Drilling Machines and hand drills Robust HSS construction for reliable metalworking The short HSS construction of this drill bit provides a resilient combination of hardness and elasticity that reduces breakage risk under typical workshop loads. With a 3.8 mm diameter and a short overall design, the bit delivers improved rigidity compared with longer variants, resulting in more consistent hole geometry and less runout during operation. This makes the tool particularly suited for demanding metalworking tasks where stability matters. Precise geometry for clean starts and accurate holes Thanks to the 118° tip angle and Type N geometry, the drill achieves dependable centring and a controlled cutting action in a wide range of metallic materials. The 43 mm flute length supports effective chip evacuation during through-drilling, lowering heat build-up and preserving cutting performance. These features translate into cleaner hole edges and less rework for fabricators and maintenance technicians. Designed for professional and hobby use in metal shops Targeted at workshops, maintenance teams and hobbyists working with metal, this short Twist Drill excels in applications that require tight tolerances and repeatable results. The Type N normal spiral is optimised for steels and common ferrous materials, while the roll-rolled HSS manufacturing process aids durability when drilling small diameters such as 3.8 mm. For users seeking a dependable general-purpose metal drill bit, this item balances service life and ease of re-sharpening. Standard compliance and handling advantages Manufactured to DIN 338, the drill conforms to expectations for short straight-shank twist drills, ensuring compatibility with standard chucks and fixtures. The reduced overhang of the short version increases positional accuracy and lowers the chance of bit deflection, which is especially beneficial when drilling in jigged or clamped setups. Regular sharpening and correct cutting speeds will maintain performance and extend the working life of the tool. MetavCUT recommends this short HSS Type N Twist Drill for precise metalworking tasks — for further technical advice or application-specific guidance contact METAV Werkzeuge. Email: info@metav-werkzeuge.com — Phone: +49 2822 7131930 — WhatsApp: +49 170 2837271 Designation: Twist Drill Brand: MetavCUT SKU: 40038-FDA Diameter: 3.8 mm Tip angle: 118° Flute length: 43 mm Overall length: 75 mm Type: Type N Material: HSS Standard: DIN 338 Finish / Version: short Colour: black Application: Drills for metal For drilling machine: Drilling Machine Packaging unit: 10 Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the Twist Drill by MetavCUT used for? The Twist Drill from MetavCUT (Type N) is primarily used for the machining of high-strength materials and larger hole diameters in metal. Its short HSS design is easier to re-sharpen, withstands greater loads and therefore reduces the risk of breakage, making it suitable for extensive metalworking tasks. Which three drill types exist? The main drill categories are metal drills, wood drills and stone/concrete drills. The MetavCUT Twist Drill belongs to the metal drill group and is optimised for metals and similar materials.
3.8mm HSS-E Twist Drill DIN 338 ,short, 5% cobalt-alloyed, Type N - MetavCUT
Twist Drill — Type N short, 3.8 mm, 135° point, 5% cobalt-alloyed, HSS‑E, fully ground shank, DIN 338 by MetavCUT The Twist Drill Type N short is a precision metalworking drill bit designed for stable, high‑accuracy drilling in hard materials using a Drilling Machine. Short design for improved stability 3.8 mm diameter for precise holes 135° point angle for hard materials 5% cobalt‑alloyed HSS‑E for heat resistance Fully ground shank for high concentricity Engineered for stable, accurate metal drilling The short configuration of this Twist Drill delivers a reduced overhang that significantly improves stability and reduces deflection during machining. With a 3.8 mm diameter and a 75 mm overall length including a 43 mm spiral length, the geometry supports precise hole positioning and consistent concentricity. The Type N spiral profile is optimised for metalworking applications, allowing controlled chip evacuation and steady feed rates when used in a suitable Drilling Machine. Material and wear resistance for demanding tasks Manufactured from HSS‑E with a 5% cobalt alloy, this short drill bit offers enhanced hot‑hardness and improved wear resistance compared with plain HSS grades. The 135° point angle reduces thrust during entry into hard materials and is particularly effective on stainless steel and other tough alloys. The fully ground flute geometry ensures sharp cutting edges for clean hole walls, while the cobalt content supports longer tool life under elevated temperatures. Precise manufacturing and conformity to DIN 338 Produced to the DIN 338 specification, the Short Twist Drill features consistent dimensions and dependable interchangeability for industrial use. The fully ground shank and flute finish result in excellent roundness and high runout accuracy, which translates into fewer rejects and faster setup for series production. For tasks requiring repeatability and tight tolerances, this design reduces the need for secondary rework. Practical applications and user guidance This drill is intended primarily for Drills for metal operations including alloyed and unalloyed steels, cast iron, non‑ferrous metals and select plastics. Typical uses include maintenance, fabrication and precision engineering where short, stiff drilling tools are preferred. For best results, use appropriate cutting fluid and moderate spindle speeds to exploit the cobalt alloy’s thermal advantages and to minimise risk of premature wear or breakage. Compatibility and handling recommendations The fully ground cylindrical shank fits standard chucks of portable and stationary drilling equipment and is especially suited to station‑based Drilling Machines. Because ground HSS drills can be more brittle than rolled variants, avoid excessive vibration and ensure secure clamping; cooling or lubrication is recommended for deeper or continuous drilling cycles. The short length makes bit changes quick and reduces operator fatigue in repetitive tasks. Strongly recommended: choose MetavCUT quality for stable, precision metal drilling and contact METAV Werkzeuge for personalised advice — email info@metav-werkzeuge.com, phone +49 2822 7131930, WhatsApp +49 170 2837271 Technical information Designation: Twist Drill Brand: MetavCUT SKU: 47038-FDA Diameter: 3.8 mm Overall length: 75 mm Spiral length: 43 mm Point angle: 135° Type: Type N Execution: short Material: HSS-E Alloy: 5% cobalt-alloyed Shank: fully ground Intended machine: Drilling Machine Application: Drills for metal Standard: DIN 338 Model series: Standard Line Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the primary use of the Twist Drill MetavCUT Type N short? The MetavCUT Twist Drill Type N short is used predominantly for metalworking tasks; it is designed to drill through high‑strength materials and larger diameters where a short, rigid tool provides better precision and reduced bending. Which three drill types are commonly distinguished and where does the Twist Drill fit? Generally, drill types are classified as metal drills, wood drills and stone/concrete drills. The MetavCUT Twist Drill Type N short belongs to the metal drill category and is optimised for machining metals rather than wood or masonry. Why are twist drills sometimes point‑sharpened? Point sharpening reduces the cross‑cut at the tip, lowering friction and thus reducing the required feed forces; a sharper, correctly angled tip also helps centre the drill more reliably in the workpiece. Can a metal twist drill be used to drill wood? A metal drill such as the MetavCUT Twist Drill can be used in wood, but guidance and finish may be inferior to a dedicated wood bit; nevertheless, metal drills are easier to regrind and generally exhibit less self‑feed in softer materials.
3.8mm HSS-G Body Drill ,double sided, bright finished - MetavCUT
Body Drill (Karosseriebohrer) — Double-Sided HSS‑G Twist Drill, 3.8 mm, 135° Tip, Bright Finished Body Drill (Karosseriebohrer) is a precision Twist Drill designed for demanding metalworking tasks with a double-sided configuration and a fully ground shank suitable for use in a Drilling Machine. MetavCUT Body Drill, 3.8 mm diameter Double-sided design for two usable tips HSS‑G fully ground for precise metal holes 135° tip angle for harder materials Bright finished shank, total length 55 mm Faster, cleaner holes in hard metals for reliable results The HSS‑G composition and fully ground geometry deliver sharp cutting edges and high runout accuracy, so each hole is consistently clean. The 135° tip angle reduces burr formation and improves entry on tougher alloys like stainless steel, while the bright finish supports smooth chip evacuation. Users benefit from reduced rework and more predictable hole tolerances when working with sheet metal, cast parts or non-ferrous components. Double-sided design reduces downtime and improves workshop efficiency Because the drill is double-sided, each end has a usable tip, effectively offering two cutting edges in one tool; when one tip dulls it can be reversed, extending tool life and minimizing tool changes. The short, stable geometry makes this drill particularly practical for bodywork and thin-plate drilling where precision and repeatability matter. For workshops aiming to keep cycle times low, the combination of Twist Drill design and robust HSS‑G material supports faster drilling with less feed force. Practical use cases and target users who profit most This Twist Drill is tailored for professionals and advanced hobbyists working on automotive body panels, sheet metal fabrication and machine maintenance. The product excels when creating clean holes for rivets or fasteners in thin to medium-thickness metal sheets. For technicians requiring a compact yet accurate drill for repetitive tasks, this tool balances durability and serviceability, while still being suitable for general metal drilling tasks on various alloys. Care, application tips and simple explanations for non-experts To achieve optimal results, use appropriate cutting speed, steady coolant flow and a stable drilling setup; the HSS‑G material can be more brittle than rolled alternatives and benefits from cooling. The term fully ground means the flutes and geometry are CNC-ground rather than rolled, producing a sharper cutting edge and better concentricity. For hand or machine use in a Drilling Machine, clamp the workpiece and ensure correct feed to avoid chipping. Re-sharpening is possible but should be done by experienced grinding to maintain the 135° geometry. Recommendation: Choose the MetavCUT Body Drill for precise, efficient metal drilling — for technical questions or personalised advice contact METAV Werkzeuge at info@metav-werkzeuge.com, call +49 2822 7131930 or WhatsApp +49 170 2837271. Designation: Body Drill (Karosseriebohrer) Brand: MetavCUT SKU: 58038-FDA Diameter: 3.8 mm Material: HSS‑G Execution: Double-sided Finish: Bright finished Shank: Fully ground Tip angle: 135° Spiral length: 13 mm Total length: 55 mm Suitable for: Drilling Machine / Hand Drills for metal Model series: Standard Line Application: Drills for metal Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What materials is the MetavCUT Body Drill (Karosseriebohrer) best suited for? The MetavCUT Body Drill, a purpose-built Twist Drill, is particularly suited to alloyed and unalloyed steel, cast steel, cast iron, sintered iron, malleable iron, non-ferrous metals and hard plastics; its HSS‑G composition and 135° tip make it effective for harder workpieces and precise metal holes. For what is a Twist Drill used? A Twist Drill is mainly used for machining high-strength materials and larger drill diameters; its form permits easy regrinding and it withstands higher loads. It is widely applied where robust, clean holes are needed in metalworking and bodywork. Which three drill types exist? Common categories are Metal Drill, Wood Drill and Stone/Concrete Drill; the MetavCUT Body Drill belongs to the Metal Drill group and is optimised for that range of applications.
3.8mm HSS-G Twist Drill DIN 1897 ,extra short, bright finished, Type N - MetavCUT
Twist Drill — Type N, 3.8 mm, 135° tip, Extra Short, Bright Finished, HSS‑G, DIN 1897 The Twist Drill (Type N) is an extra short, bright finished HSS‑G metal drill designed for precise work in tight spaces and for use with hand and drilling machines. Extra Short design for improved stability 135° tip angle for harder materials HSS‑G material for high wear resistance Cylindrical shank for standard three‑jaw chucks Conforms to DIN 1897 for robust performance Faster, more controlled metal drilling with HSS‑G performance The Twist Drill from MetavCUT combines HSS‑G construction with a ground flute geometry to enable up to 40% faster drilling while requiring significantly less feed force. This results in less operator fatigue and more consistent holes when working with alloyed and unalloyed steels, cast steels, non‑ferrous metals and hard plastics. For users looking to boost shop productivity, the reduced cutting forces translate directly into smoother operation and fewer rework cycles. Extra short length increases stability and reduces breakage risk Designed to the DIN 1897 extra short specification, this drill’s reduced overall length improves torsional rigidity and lowers the chance of breakage during demanding operations. In confined setups or where minimal overhang is essential—such as thin sheet metal, profiles and tight fixture arrangements—the Extra Short execution gives a decisive handling advantage and steadier guidance through the workpiece. Compatible shank and practical use in hand drills Equipped with a cylindrical shaft, the bit fits common three‑jaw chucks on hand drills and drilling machines, ensuring universal clamping and straightforward replacement. When used in hand drilling, the Type N normal spiral geometry supports reliable chip evacuation in metalworking tasks; apply moderate, steady feed to benefit from the improved centring and reduced tendency to wander. Who benefits and where this drill excels Workshop technicians, maintenance teams and metal fabricators seeking a reliable standard‑spiral metal drill will appreciate the Standard Line quality of this tool. Its 135° tip angle shortens the initial penetration time for harder materials and assists in maintaining concentricity. For less experienced users, the robust design makes it easier to achieve clean results while still allowing sharpening and resharpening when needed. Strong recommendation: Choose MetavCUT’s Extra Short Twist Drill (Type N) for demanding metal applications — METAV Werkzeuge offers expert guidance if unsure which drill best fits your project; contact info@metav-werkzeuge.com or call +49 2822 7131930 or WhatsApp +49 170 2837271 Designation: Twist Drill Brand / Manufacturer: MetavCUT SKU: 56038-FDA Diameter: 3.8 mm Overall length: 52 mm Spiral length: 20 mm Tip angle: 135° Type: Type N Execution: Extra Short Finish / Colour: Bright finished Shank: Cylindrical Material: HSS‑G Standard: DIN 1897 Application: Drills for metal For use in: Drilling Machine / Hand Drill Model series: Standard Line Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What materials can the Twist Drill (Type N) from MetavCUT handle? The MetavCUT Twist Drill Type N is designed primarily for metalworking: it drills alloyed and unalloyed steel, cast steel, cast iron, sintered iron, malleable cast iron, non‑ferrous metals and hard plastics, offering reliable performance across typical workshop materials. Is the MetavCUT Twist Drill suitable for hand drills and machines? Yes, the Twist Drill with a cylindrical shank fits standard three‑jaw chucks and is suitable for use in both hand drills and larger drilling machines; its extra short design improves stability especially in manual or angled operations. For what is a Twist Drill used? A Twist Drill is mainly applied to the machining of high‑strength materials and larger drill diameters. This shape is easy to resharpen and withstands higher loads, making it well suited for demanding metalworking tasks. Which three drill types exist? The three primary drill types are metal drills, wood drills and stone/concrete drills.
3.8mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Kompakte Bauweise und geschliffene HSS-Geometrie sorgen für hohe Stabilität und eine saubere Bohrung in Stahl und Gusswerkstoffen. Der 135° Spitzenwinkel reduziert Anbohrzeiten und verbessert die Schneidwirkung bei härteren Werkstoffen. Bestellen Sie den Spiralbohrer von MetavCUT direkt über Metav Werkzeuge oder fragen Sie unsere Beratung bei Bedarf an. Spiralbohrer HSS-G 3,8 mm (Kurz) von MetavCUT Spiralbohrer HSS-G in kurzer Ausführung für präzise Metallbohrungen auf Hand- und stationären Maschinen Spiralbohrer MetavCUT HSS-G geschliffen Kurzbohrer für hohe Stabilität Spitzenwinkel 135° für harte Stähle Für Handbohrmaschine und stationären Einsatz DIN 338 konform, Serie Standard Line Präzision und Stabilität für Metallbohrungen Die kurze Ausführung des Kurzbohrers reduziert die Auskraglänge und erhöht dadurch die Stabilität beim Bohren in Metall. Diese Bauform minimiert Vibration und Verbiegen, was besonders bei kleinen Durchmessern den Ausschuss reduziert. Die Kombination aus geschliffener Spannutengeometrie und kompakter Länge ermöglicht exakte Bohrungen mit reproduzierbarer Qualität, selbst bei handgeführten Einsätzen in Werkstatt und Montage. Materialqualität und Schneidgeometrie für härteste Anforderungen Der Einsatz von HSS-G (geschliffen) macht den Bohrer widerstandsfähig gegen Verschleiß und sorgt für sehr scharfe Schneiden. Der 135° Spitzenwinkel verringert das Auswuchten beim Anbohren und eignet sich speziell für legierte und unlegierte Stahlarten sowie Gusseisen und Temperguss. Kunden profitieren von schnellerem Vorschub und geringerer Anpresskraft, was die Produktivität bei Serienarbeiten erhöht. Geeignete Anwendungen und Maschinen Der Bohrer wurde für das Bohren in Metall konzipiert und ist sowohl für die Handbohrmaschine als auch für stationäre Säulenbohrmaschinen geeignet. Typische Einsatzfelder sind Reparaturwerkstätten, Maschinenbau und allgemeine Metallbearbeitung. Für präzise Passungen empfiehlt sich das Anpunkten mit einem Zentrierbohrer; für tiefe Bohrungen ist die kurze Ausführung hingegen weniger geeignet, hier lohnt sich mehrstufiges Aufbohren. Anwendungshinweise und Arbeitssicherheit Für optimale Ergebnisse wird Kühlschmierstoff bei Bohrungen in schmiede- oder gehärteten Stählen empfohlen, um Überhitzung zu vermeiden. Bei Verwendung von geschliffenen HSS-Bohrern auf stationären Maschinen sorgt langsame und konstante Vorschubkraft für lange Standzeiten. Das Einhalten von empfohlenen Schnittgeschwindigkeiten und regelmäßiges Nachschleifen oder Austausch verhindern Spanverklebung und Bruchrisiken. Empfehlung: Der geschliffene HSS-G Kurzbohrer von MetavCUT liefert präzise Ergebnisse mit hoher Standzeit – für Beratung und Bestellung wenden Sie sich an Metav Werkzeuge per Email info@metav-werkzeuge.com oder Telefon +49 2822 7131930 Produktmerkmale Artikelnummer: 45038-FDA Marke: MetavCUT Bezeichnung: Spiralbohrer Modellserie: Standard Line Norm: DIN 338 Fakten Durchmesser: 3,8 mm Gesamtlänge: 70 mm Spirallänge: 39 mm Spitzenwinkel: 135° Verpackungseinheit: 10 Besonderheiten Material: HSS-G — Geschliffen, hohe Rundlaufgenauigkeit Schaft-Ausführung: geschliffen (vollständig geschliffener Zylinderschaft) Ausführung: kurz — reduzierte Auskraglänge für Stabilität Für Bohrmaschine: Handbohrmaschine und stationär Typ: Typ N — Normalspirale für Metallbearbeitung DIN 338 — Norm für kurze Spiralbohrer mit Zylinderschaft FAQ Für welche Materialien eignet sich der Spiralbohrer am besten? Der Spiralbohrer von MetavCUT (HSS-G, Typ N, SKU 45038-FDA) eignet sich besonders für legierte und unlegierte Stahlarten, Gussstahl, Gusseisen sowie Nichteisenmetalle und Hartkunststoff. Ist der Kurzbohrer für Handgebrauch sicher einsetzbar? Ja. Die kurze Ausführung des geschliffenen HSS-Bohrers bietet erhöhte Stabilität und eignet sich für die Handbohrmaschine ebenso wie für stationäre Maschinen, solange die Maschine ausreichend Steifigkeit bietet. Welche Vorteile hat der 135° Spitzenwinkel? Der 135° Spitzenwinkel reduziert Anbohrkräfte und erhöht die Kontaktfläche, was die Anbohrzeit bei harten Werkstoffen verkürzt und die Standzeit des Bohrers verbessert. Wie sollte der Bohrer bei harten Materialien gekühlt werden? Bei Bohrungen in gehärteten Stählen empfiehlt sich die Verwendung von Kühlschmierstoff und moderaten Schnittgeschwindigkeiten. Der geschliffene HSS-Bohrer profitiert von kontinuierlicher Kühlung zur Vermeidung von Überhitzung. Worauf ist bei der Auswahl von Bohrmaschinen zu achten? Für präzise Ergebnisse mit dem MetavCUT Spiralbohrer (Standard Line) ist eine ausreichend steife Aufnahme und ein geringer Rundlauf der Spindel wichtig; bei Bedarf vorbohren bzw. anpunkten, um Wanderneigung zu vermeiden.
3.8mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Twist Drill Type N — Short HSS-G Drill, 3.8 mm, 135° Tip, Bright Finished The Twist Drill Type N is a short HSS-G drill designed for precision metalworking on Drilling Machines, offering improved stability and clean bore quality. Short design for higher Stability and precision HSS-G ground for sharp edges and accurate holes 135° tip angle for easier entry in hard materials Complies with DIN 338 for short cylinder-shank drills Fully ground shank for reliable machine seating Exceptional stability for accurate metal holes The Twist Drill from MetavCUT in short execution delivers notably reduced deflection thanks to its shortened projection length. This Short Design minimises bending and vibration during machining, which translates into consistently round, clean holes and longer tool life under comparable conditions. For users working on demanding metal applications, the higher rigidity supports more predictable feed rates and better surface quality. Faster penetration with less applied force A ground HSS-G geometry enables up to 40% faster drilling and requires around 50% less thrust compared with conventional HSS variants, making the tool efficient for serial or workshop tasks. The combination of the short flute length and CNC grinding creates very sharp cutting edges and excellent chip evacuation when used with appropriate cutting fluid, reducing operator effort and cycle times on suitable equipment. Optimised for harder materials and precision With a 135° tip angle and the classic Type N spiral, this short drill is tailored to penetrate harder materials such as alloyed and unalloyed steel, cast steel, cast iron, sintered iron, malleable iron, non-ferrous metals and hard plastics. The larger tip angle shortens the initial bite and improves centring on tougher substrates, which is particularly beneficial when accurate hole position and surface finish matter. Machine compatibility, shank finish and standards Manufactured in accordance with DIN 338, this short cylinder-shank drill is intended primarily for rotating, stationary and mobile machine tools designed for metalworking. The Fully Ground shank and bright finished surface ensure secure clamping and reduce the risk of slippage in the chuck. Key dimensions: Diameter 3.8 mm, Spiral Length 39 mm, Overall Length 70 mm — a compact combination for stable operation. Handling recommendations and best practice Because ground HSS drills can be comparatively brittle, it is advisable to use coolant for extended operations and avoid excessive lateral forces. For best results, select feeds and speeds according to the workpiece material and maintain steady axial pressure; the short geometry inherently improves guidance and reduces tendency to wander. Regular resharpening preserves the cutting geometry and prolongs service life for precision tasks. MetavCUT’s short Twist Drill Type N is recommended for precise metalworking applications — for tailored advice or supplementary technical data contact METAV Werkzeuge: info@metav-werkzeuge.com, Tel +49 2822 7131930, WhatsApp +49 170 2837271 Twist Drill Brand: MetavCUT SKU: 48038-FDA Diameter: 3.8 mm Overall Length: 70 mm Spiral Length: 39 mm Tip Angle: 135° Type: Type N Material: HSS-G Standard: DIN 338 Execution: Short Shank Finish: Fully Ground Colour: Bright Finished For Machine: Drilling Machine Application: Drills for Metal Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What are Twist Drills used for? Twist Drills are primarily applied to the machining of high-strength materials and larger diameters; the MetavCUT Twist Drill in short form is ideal for precision metalworking. The ground geometry is easy to resharpen and retains its cutting edges under higher loads, making it suitable for demanding workshop and industrial tasks. Which 3 drill types are there? Three common drill categories are Metal drills, Wood drills and Masonry/Stone-Concrete drills. The MetavCUT Type N Twist Drill belongs to the metal drill group and is optimised for steel and related materials.
3.8mm HSS-G Twist Drill DIN 340 ,long, bright finished - MetavCUT
Twist Drill — 3.8 mm, 135° point, Long HSS‑G, Bright Finished, DIN 340 (MetavCUT) The Twist Drill is a long HSS‑G metal‑drilling tool for Drilling Machines, engineered for deep holes and hard materials such as alloyed steel. Long design for deep or hard‑to‑reach holes HSS‑G ground geometry for precise, clean bores 135° point angle suited for harder materials Fully ground shank for high concentricity Compliant with DIN 340 for standardized performance Deeper holes with reliable cutting performance This long‑version bit combines HSS‑G material and a ground flute geometry to deliver faster cutting and cleaner hole finishes in metal. The extended Spiral Length of 73 mm and Overall Length of 112 mm allow access to recessed or hard‑to‑reach drilling positions, while the 135° point reduces burr formation in tougher alloys. The CNC grinding process produces sharp cutting edges and consistent flute geometry, which improves chip evacuation and contributes to repeatable accuracy in production and workshop use. Precision and machine compatibility for metalwork Designed for use with a Drilling Machine, the fully ground shank ensures excellent Roundness and secure clamping, reducing runout and vibration. The combination of DIN 340 long design and HSS‑G material makes this tool particularly effective for drilling in alloyed and unalloyed steels, cast irons and certain engineering plastics. For tasks requiring steady feed and cooling—such as deep metal bores—the long HSS‑G version maintains tool life and hole quality when used with appropriate coolant regimes. Practical benefits and working recommendations As a specialist Twist Drill in the Standard Line, the ground HSS construction requires lower axial force and often drills up to 40% faster than conventional HSS bits of rolled geometry. To maximize service life, use steady speeds, adequate lubrication or coolant, and moderate feed—especially when machining higher tensile materials. The Bright Finished surface aids initial centring and allows simple visual inspection for wear; however, the ground geometry is best suited to stationary or machine‑based applications to minimise breakage risk. Who benefits from this tool and typical applications Workshops, toolrooms and professional metalworkers will appreciate the Long HSS‑G bit for tasks such as through‑holes, deep dowel‑holes and repair drilling in ferrous materials. The tool is aimed at users needing precision and depth capability rather than casual or purely wood‑based applications. Because of its hardened geometry and 135° point, it is recommended for machining harder steels where reduced tip penetration and controlled chip formation are required. Strong recommendation: Choose the MetavCUT long HSS‑G Twist Drill for reliable deep‑hole performance and contact METAV Werkzeuge for tailored advice — they provide comprehensive technical consultation and support via email at info@metav-werkzeuge.com, by phone on +49 2822 7131930 or WhatsApp at +49 170 2837271 Designation: Twist Drill Marke: MetavCUT SKU: 53038-FDA Diameter: 3.8 mm Point Angle: 135° Version: long Colour: Bright Finished Suitable for: Drilling Machine Spiral Length: 73 mm Overall Length: 112 mm Shank Finish: Fully Ground Model Series: Standard Line Application: Drills for Metal Material: HSS‑G Norm: DIN 340 Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the primary use of a Twist Drill and which materials suit it best? The MetavCUT Twist Drill is primarily used for machining high‑strength materials and larger drill diameters; it is especially suitable for alloyed and unalloyed steels, cast and sintered irons and certain hard plastics. The long HSS‑G design supports deeper bores and makes the bit easier to resharpen if required. Which three main drill types exist? Typical drill classifications are Metal Drills, Wood Drills and Stone/Concrete Drills; the MetavCUT Twist Drill belongs to the Metal Drills category and is optimised for ferrous and non‑ferrous metalworking tasks. Why are Twist Drills pointed (regrinded) at the tip? The point grinding reduces the cross‑cut at the tip, lowering friction and therefore required feed force; reprofiling the tip also improves centring in the Workpiece and reduces tool wandering during startup. Can a Twist Drill be used to drill wood? A metal Twist Drill like the MetavCUT bit can drill wood, but guidance and finish will be inferior compared with purpose‑made wood bits; metal drills are easier to resharpen and show less self‑feed, yet yield rougher hole edges in timber. For which hole depths is a Twist Drill most commonly used? A full solid bore is typically produced with a Twist Drill. For diameters up to about 20 mm and drilling depths up to around 100 mm, the Twist Drill is the most frequently used tool, especially in metalworking operations. Is HSS or HSSE better? The general belief that HSSE is always superior to HSS is not universally valid. Evaluate working conditions carefully: the higher acquisition cost of HSSE must be justified by thermal or wear demands of the application before choosing it over HSS.
3.9mm HSS Twist Drill DIN 338 ,short, roll forged, black, Type N - MetavCUT
Twist Drill — Type N, Short, Ø 3.9 mm, 118° Point, HSS, Black, DIN 338 (MetavCUT) A short Twist Drill in Type N execution for precise metal drilling with handheld drilling machines. Short HSS twist drill for precise metal drilling Diameter 3.9 mm for fine holework 118° point angle for reliable centring DIN 338 standard: short cylindrical shank Black finish for improved visibility on workpieces Engineered for accurate metal holes and long tool life Built from HSS (High Speed Steel), this short twist drill combines material toughness with elastic resilience for demanding metalworking. The Type N spiral is the classic geometry for metal drilling and is especially suited to alloyed and unalloyed steels, cast iron, non‑ferrous metals and certain plastics. Thanks to the short design, bending and runout are minimised which improves precision when drilling smaller diameters such as 3.9 mm. The result is a consistent hole quality and reduced breakage risk during routine workshop tasks. Geometry that improves centring and reduces effort The 118° point angle is a balanced choice for many softer and medium‑hard materials; it eases initial penetration and helps the bit stay centred on curved or irregular surfaces. Combined with the short flute length specified by DIN 338, this geometry reduces chatter and allows higher feed stability on handheld operations. The practical benefit is fewer re‑drills and a better surface finish of the bore, which saves time during assembly and fitting work. Practical application: who benefits and where to use it Designed as a metalworking tool, this twist drill from MetavCUT is ideal for metalworkers, maintenance technicians and serious hobbyists who need reliable, repeatable holes. Use cases include drilling into steel components, machine parts and non‑ferrous fittings where precise Ø 3.9 mm holes are required. The compact length makes it particularly suitable for confined spaces and fixtures where longer drills would flex or vibrate. Care, sharpening and handling tips for longer service life Regular inspection of the cutting edges and occasional re‑sharpening preserve performance; re‑pointing (Ausspitzen) reduces the cross‑cut at the tip, lowering friction and allowing gentler feed forces while improving centring in the workpiece. Because the short construction minimises overhang, the drill is easier to control and less prone to breakage, and it can be re‑sharpened more easily than longer variants. For best results, operate with stable clamping and moderate feed rates suited to the material being drilled. Choose MetavCUT’s Twist Drill for dependable, workshop‑grade metal drilling — METAV Werkzeuge offers comprehensive advice if unsure whether this tool meets specific requirements: info@metav-werkzeuge.com | Tel: +49 2822 7131930 | WhatsApp: +49 170 2837271 Technical specifications Designation: Twist Drill Brand: MetavCUT SKU: 40039-FDA Diameter: 3.9 mm Point angle: 118° Material: HSS Type: Type N Execution: Short Spiral length: 43 mm Total length: 75 mm For use with: Hand Drill Colour: black Standard: DIN 338 Application: Drills for metal Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ For what is a Twist Drill used? The Twist Drill from MetavCUT in Type N execution is primarily applied when machining high‑strength materials and larger drill diameters; it is easy to re‑grind and withstands greater loads, making it suitable for through‑holes and demanding metalworking tasks. Which three drill types exist? Commonly distinguished drill types are metal drills, wood drills and stone/concrete drills, and the MetavCUT Twist Drill belongs to the metal drill category tailored for steel, cast iron and non‑ferrous metals.
3.9mm HSS-E Twist Drill DIN 338 ,short, 5% cobalt-alloyed, Type N - MetavCUT
Kompakte, kurz ausgeführte Bohrungslösung mit HSS-E-Werkstoff und 135° Spitzenwinkel für stabile, präzise Metallbearbeitung; ideal für präzisionsorientierte Werkstätten. Bestellen direkt über Metav Werkzeuge oder Beratung per eMail info@metav-werkzeuge.com anfragen. Spiralbohrer 3,9 mm HSS-E (kurz) – MetavCUT Standard Line Der Spiralbohrer ist ein kurz ausgeführter, geschliffener HSS-E Bohrer für präzise Metallbohrungen an Handbohrmaschine und stationären Maschinen. Spiralbohrer 3,9 mm HSS-E, geschliffen Kurze Ausführung für hohe Stabilität Spitzenwinkel 135° für harte Werkstoffe Geeignet für Handbohrmaschine und Maschinen Norm DIN 338, Typ N, Standard Line Kompakte Bauweise für zuverlässige Präzision Die kurze Ausführung reduziert die Auskraglänge und erhöht damit die Stabilität bei der Bohrung. Durch die geringere Neigung zum Verbiegen werden Laufgenauigkeit und Bohrbild verbessert, was vor allem bei engen Toleranzen und kleinen Durchmessern relevant ist. Diese Konstruktion ermöglicht kontrollierte Vorschubwerte und minimiert Vibrationen, sodass saubere, maßhaltige Löcher in Metall erzielt werden. Hochwertiges Material sorgt für Schnittfestigkeit Der Einsatz von HSS-E mit 5% kobaltlegiertem Zusatz kombiniert Zähigkeit mit Warmfestigkeit, wodurch die Standzeit beim Bohren in legiertem Stahl steigt. Die geschliffene Schaft- und Spanutengeometrie sorgt für scharfe Schneidkanten und hohe Rundlaufgenauigkeit, was die Bohrqualität verbessert. Bei Durchmessern unter 6 mm verringert die niedrigtemperierte Produktion das Bruchrisiko spürbar. Passende Einsatzfelder und Maschinenempfehlung Als Typ N mit Norm DIN 338 eignet sich das Werkzeug für allgemeine Metallbearbeitung: legierter und unlegierter Stahl, Gusseisen, Nichteisenmetalle und Kunststoffe. Im Cluster der Standard-Durchmesser bietet dieser Bohrer die Balance aus Handhabung und Leistung und kann sowohl in Handbohrmaschine als auch auf Säulenbohrmaschinen eingesetzt werden. Für höchste Genauigkeit empfiehlt sich Anpunkten mit Zentrierbohrer. Einfache Handhabung und sichere Arbeitstechnik Die Kombination aus geschliffenem Schaft und kompakter Länge erleichtert das Handling und reduziert das Risiko von Bohrerbruch bei stationärem Einsatz. Kühlung bei zähen Werkstoffen und moderater Vorschub bei Edelstahl verlängern die Lebensdauer, während passende Drehzahlen und Anbohrhilfe saubere Einläufe sichern. So lassen sich reproduzierbare Ergebnisse mit geringem Nacharbeitaufwand erzielen. Für präzise Metallbohrungen die MetavCUT Standard Line wählen und direkt über Metav beziehen – bei Fragen eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 nutzen Produktmerkmale Artikelnummer: 47039-FDA Marke: MetavCUT Serie: Standard Line Ausführung: kurz Material: HSS-E Fakten Durchmesser: 3,9 mm Gesamtlänge: 75 mm Spirallänge: 43 mm Spitzenwinkel: 135° Verpackungseinheit: 10 Besonderheiten Schaftausführung: geschliffen Norm: DIN 338 Typ: Typ N Zulegierung: 5% kobaltlegiert Geeignet für: Handbohrmaschine FAQ Welche Werkstoffe kann der Bohrer bearbeiten? Der MetavCUT Standard Line Spiralbohrer 3,9 mm (SKU 47039-FDA) eignet sich für legierten und unlegierten Stahl, Gusseisen, Nichteisenmetalle sowie Kunststoffe; bei zähen Werkstoffen Kühlung empfehlen. Ist der Bohrer für Handgebrauch geeignet? Ja, dieser kurz ausgeführte HSS-E Bohrer wurde für den Einsatz an Handbohrmaschine und stationären Maschinen konzipiert und bietet durch die kurze Auskraglänge erhöhte Stabilität. Warum ist der Spitzenwinkel 135° vorteilhaft? Ein Spitzenwinkel von 135° erleichtert das Anbohren harter Werkstoffe und reduziert Wanderneigung, wodurch beim MetavCUT Spiralbohrer die Anbohrzeit und das Ausreißen minimiert werden. Wie verringert die geschliffene Ausführung Bruchrisiken? Die geschliffene Geometrie liefert schärfere Kanten und besseren Rundlauf; in Verbindung mit dem HSS-E Werkstoff und der niedrigen Temperaturfertigung sinkt speziell bei kleinen Durchmessern das Bruchrisiko.
3.9mm HSS-G Body Drill ,double sided, bright finished - MetavCUT
Der Karosseriebohrer von MetavCUT überzeugt durch präzise Schneidleistung und praktische Doppelendausführung; der geschliffene HSS-G sorgt für schnelle Bohrfortschritte und der 135° Spitzenwinkel erleichtert das Anbohren harter Werkstoffe. Für Werkstatt und Karosseriearbeiten kann die Bestellung direkt über Metav Werkzeuge erfolgen oder die Beratung vor dem Kauf in Anspruch genommen werden. Karosseriebohrer von MetavCUT Karosseriebohrer aus der Standard Line für präzise Bohrungen in Metall bei Karosseriearbeiten und Werkstattanwendungen Doppelendbohrer beidseitig einsetzbar Geschliffenes HSS-G für saubere Bohrbilder 135° Spitzenwinkel für härtere Werkstoffe Geeignet für Handbohrmaschine Spirallänge 13 mm, Gesamtlänge 55 mm Schnellere Bohrung durch geschliffene HSS-G-Güte Der geschliffene HSS-G kombiniert hohe Schärfe mit präziser Geometrie, wodurch die Anbohrzeit signifikant reduziert wird. Bei legierten und unlegierten Stahlarten sowie Gusseisen liefert die geschliffene Schneide saubere Bohrlöcher mit geringer Ausrissneigung. Für Anwender bedeutet das weniger Nacharbeit und geringere Anpresskraft, was insbesondere bei Serienkleinteilen Zeit und Aufwand spart. Praktisches Doppelenddesign für kurze Einsätze und hohen Nutzwert Dank der doppelseitigen Ausführung lässt sich der Bohrer beidseitig verwenden, was im Alltag wie zwei Werkzeuge in einem wirkt. Die kompakte Bauform mit Spirallänge 13 mm und Gesamtlänge 55 mm macht den Einsatz an Blechen und Karosserieteilen besonders handlich. Anwender in der Werkstatt profitieren von schneller Verfügbarkeit der Ersatzschneide ohne Maschinenstillstand. Passgenau für Handbohrmaschine und typische Karosserieanwendungen Mit einem Durchmesser von 3,9 mm fällt der Bohrer in den Standard-Bereich und eignet sich somit für Handgeführte Bohrmaschinen, dünne bis mittlere Bleche und Profile. Vorbohren mit einem Zentrierstift verbessert die Rundlaufgenauigkeit bei kritischen Passungen. Die Auslegung vermeidet unnötiges Wandern auf der Oberfläche und erleichtert das Arbeiten an Niet- und Befestigungsbohrungen. Sicherer Einsatz und Hinweise zur Einsatzoptimierung Die geschliffene Schaftausführung verlangt nach sorgsamer Handhabung; stationäre Kühlung oder intermittierendes Arbeiten verlängern die Standzeit der Schneide. Für tiefe Löcher oder gehärtete Materialien empfiehlt sich eine stufenweise Vorgehensweise oder der Einsatz spezialisierter Hartmetallwerkzeuge. Durch die robuste Geometrie ergeben sich zuverlässige Ergebnisse bei typischen Karosseriearbeiten in der Werkstatt. Empfehlung: Den MetavCUT Standard Line Karosseriebohrer für präzise Karosseriearbeiten direkt bei Metav Werkzeuge anfragen per eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930; der Technische Vertrieb berät bei Anwendung und Einsatzparametern. Produktmerkmale Artikelnummer: 58039-FDA Marke: MetavCUT Bezeichnung: Karosseriebohrer Serie: Standard Line Fakten Durchmesser: 3,9 mm Gesamtlänge: 55 mm Spirallänge: 13 mm Spitzenwinkel: 135° Verpackungseinheit: 10 Besonderheiten Material: HSS-G — geschliffen, hohe Schärfe Ausführung: doppelseitig — Doppelendbohrer, beidseitig einsetzbar Schaftausführung: geschliffen Farbe: blank Für Bohrmaschine: Handbohrmaschine Anwendung: Bohrer für Metall FAQ Für welche Materialien eignet sich der Bohrer am besten? Der MetavCUT Karosseriebohrer aus der Standard Line eignet sich besonders für legierten und unlegierten Stahl, Gussstahl und Nichteisenmetalle; die HSS-G-Güte sorgt für saubere Ergebnisse bei typischen Karosseriearbeiten. Ist der Bohrer für den Einsatz in einer Handbohrmaschine geeignet? Ja, der Karosseriebohrer mit 3,9 mm Durchmesser ist für Handgeführte Bohrmaschinen ausgelegt und bietet gute Stabilität bei Blech- und Karosseriearbeiten. Wie wirkt sich der 135° Spitzenwinkel auf das Bohrverhalten aus? Der 135° Spitzenwinkel reduziert das Eindringmoment beim Anbohren harter Werkstoffe und verbessert die Zentrierung, was bei MetavCUT Bohrern zu kontrollierteren Bohrvorgängen führt. Was bedeutet HSS-G in der Praxis? HSS-G beim MetavCUT Karosseriebohrer steht für geschliffen; das heißt höhere Schneidenschärfe und bessere Rundlaufgenauigkeit gegenüber gewalzten Formen, ideal für präzise Metallbohrungen. In welcher Verpackungseinheit wird der Bohrer geliefert? Der Bohrer wird in der Verpackungseinheit von 10 Stück geliefert; die Artikelnummer ist 58039-FDA.
3.9mm HSS-G Twist Drill DIN 1897 ,extra short, bright finished, Type N - MetavCUT
Der extra kurze Spiralbohrer kombiniert HSS-G-Material und 135° Spitzenwinkel für kraftvolles Bohren in Metall; die kurze Bauform reduziert Bruchneigung und erhöht Stabilität, während die geschliffene Geometrie bis zu 40% schnelleres Bohren bei 50% weniger Anpresskraft ermöglicht – bestellen Sie den Bohrer direkt über Metav oder lassen Sie sich vor dem Kauf fachkundig beraten. Spiralbohrer von MetavCUT — HSS-G, Typ N, DIN 1897 (3,9 mm, extra kurz) Der Spiralbohrer ist ein extra kurzer HSS-G Metallbohrer, entwickelt für präzise Bohrungen in legierten und unlegierten Stählen sowie Gusswerkstoffen mit Handbohrmaschine und Winkelbohrmaschinen. Spiralbohrer »Spiralbohrer« von MetavCUT Extra kurz für mehr Steifigkeit beim Bohren HSS-G geschliffen: bis zu 40% schneller arbeiten Spitzenwinkel 135° für harte Werkstoffe Zylinderschaft: universelle Aufnahme im Bohrfutter Stabile Bauform reduziert Bruchrisiko und sorgt für saubere Bohrungen Die extra kurze Ausführung bietet eine deutlich höhere Verdrehungsfestigkeit als Standardlängen und minimiert so Vibration und Bruchneigung bei Handbedienung. Das ist besonders vorteilhaft beim Bearbeiten von dünnwandigen Blechen und Profilen, weil die verkürzte Gesamtlänge die Führung verbessert und die Entstehung von Ausrissen am Austritt reduziert. Anwender profitieren von gleichmäßigeren Bohrbildern und längerer Werkzeugstandzeit. Geschliffenes HSS-G für schnellere, effizientere Metallbearbeitung Dank der geschliffenen Schneide aus HSS-G ermöglicht dieses Spiralwerkzeug eine deutlich höhere Schnittgeschwindigkeit und geringere Vorschubkräfte; Labor- und Praxiswerte zeigen bis zu 40% schnellere Bohrfortschritte bei rund 50% weniger Anpresskraft gegenüber herkömmlichen HSS-Ausführungen. Der 135° Spitzenwinkel wurde gewählt, um Anbohrverhalten in harten Werkstoffen wie Edelstahl zu verbessern und längere Werkzeugstandzeit zu erreichen. Praxisgerechte Einsatzbereiche und Maschinenkompatibilität Mit einem Durchmesser von 3,9 mm gehört dieses Werkzeug in den Standard-Bereich für Alltagsarbeiten. Es eignet sich für Handbohrmaschine und stationäre Geräte, zum Bohren in Baustahl, Aluminium, Gusseisen und Hartkunststoff. Für präzise Passungen empfiehlt es sich, vor dem Endbohren anzupunkten, um Wanderneigung zu vermeiden. Hobbywerkstatt und professionelle Werkstatt profitieren gleichermaßen von der universellen Einsetzbarkeit. Schaft, Maße und Handling: Praktisch und universell einsetzbar Der Zylinderschaft (Rundschaft) sorgt für unkomplizierte Aufnahme in gängige Dreibackenfutter, ohne Spezialaufnahmen zu benötigen. Mit einer Spirallänge 20 mm und einer Gesamtlänge 52 mm ist das Werkzeug kompakt und besonders dann geeignet, wenn wenig Platz für die Bearbeitung vorhanden ist. Die Verpackungseinheit enthält praktische Mengen für Werkstattbedarf und reduziert Logistikaufwand. Empfehlung: Den MetavCUT Standard Line HSS-G Spiralbohrer für extra kurze Anwendungen direkt bei Metav beziehen — per eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930, alternativ WhatsApp +49 170 2837271 für schnelle Rückfragen. Technische Daten Artikelnummer: 56039-FDA Marke: MetavCUT Serie: Standard Line Norm: DIN 1897 Fakten Durchmesser: 3,9 mm Gesamtlänge: 52 mm Spirallänge: 20 mm Spitzenwinkel: 135° Verpackungseinheit: 10 Besonderheiten Material: HSS-G (hohe Verschleißfestigkeit, geschliffen) Ausführung: extra kurz (verbesserte Stabilität, geringere Bruchneigung) Schaftausführung: Zylinder (universelle Aufnahme im Dreibackenfutter) Typ: Typ N (Normalspirale, geeignet für Metall) Farbe: blank (heller, fertig bearbeiteter Schaft) Für Bohrmaschine: Handbohrmaschine (geeignet für handgeführte Anwendungen) FAQ Ist dieser Bohrer für Edelstahl geeignet? Der Spiralbohrer von MetavCUT (Typ N, SKU 56039-FDA) mit 135° Spitzenwinkel eignet sich für viele härtere Werkstoffe einschließlich Edelstahl; bei sehr zähen Edelstählen empfiehlt sich reduzierter Vorschub und Kühlung. Welche Maschinen sind kompatibel mit dem Zylinderschaft? Der Zylinderschaft dieses HSS-G Bohrers passt in alle üblichen Dreibackenfutter, deshalb ist er für die Handbohrmaschine und viele stationäre Bohrmaschinen geeignet. Wie wirkt sich die extra kurze Bauform beim Bohren aus? Die extra kurze Ausführung erhöht die Steifigkeit und verringert Vibrationen, was die Bruchgefahr reduziert und saubere Bohrbilder in dünnwandigen Materialien fördert. Für welche Werkstoffe ist der Typ N Spiralbohrer empfohlen? Der Typ N Normalspirale ist insbesondere für Eisen, Stahl, Gussstahl und Nichteisenmetalle ausgelegt; weiche Materialien wie Holz sind nicht optimal, da die Spiralflanke hier andere Geometrien bevorzugt. Wie tief kann ich mit diesem Durchmesser sicher bohren? Bei einem Durchmesser von 3,9 mm sind normale Bohrtiefen im Bereich der Spirallänge möglich; für sehr tiefe Löcher empfiehlt sich abgestuftes Aufbohren und Spanabfuhrüberwachung.
3.9mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Die Kombination aus kurzer Ausführung, HSS-G-Material und 135° Spitzenwinkel liefert hohe Stabilität und schnelle Bohrfortschritte bei Metallarbeiten; der geschliffene Zylinderschaft sorgt für präzisen Rundlauf. Bestellen Sie den Spiralbohrer direkt über Metav Werkzeuge oder holen Sie sich vorab eine technische Beratung bei Bedarf. Spiralbohrer 3,9 mm HSS-G (Typ N) von MetavCUT Der Spiralbohrer 3,9 mm HSS-G eignet sich als Kurzbohrer für präzise Metallbohrungen in Stahl, Guss und nicht-eisernen Metallen. Kurzbohrerausführung für hohe Stabilität Geschliffen nach DIN 338 für saubere Bohrbilder HSS-G: schnelles Bohren bei geringer Anpresskraft 135° Spitzenwinkel für harte Werkstoffe Kompatibel mit Handbohrmaschine und stationären Maschinen Höhere Präzision durch kurze Auskraglänge Die kurze Ausführung reduziert die Auskraglänge und erhöht damit die Standfestigkeit des Werkzeugs. Bei einem Durchmesser von 3,9 mm führt die verringerte Hebelwirkung zu weniger Vibration und einem besseren Rundlauf, was saubere Bohrlöcher und geringeren Werkzeugverschleiß bedeutet. Der geschliffene Zylinderschaft liefert eine hohe Maßhaltigkeit und wiederholbare Ergebnisse, ideal für Werkstätten, in denen es auf konstant gute Bohrbilder ankommt. Effizienz und Materialkompetenz für Metallbearbeitung Dank des HSS-G-Materials und der speziellen Geometrie lassen sich Bohrungen bis zu 40 % schneller ausführen, während die erforderliche Anpresskraft um etwa 50 % reduziert wird. Der 135° Spitzenwinkel erleichtert das Anbohren harter Werkstoffe wie Edelstahl und Temperguss, da der Bohrer weniger zum Wandern neigt und die Anbohrphase verkürzt wird. Diese Kombination macht das Werkzeug besonders geeignet für häufige Metallbearbeitungen. Passende Anwendungen und Maschineneinsatz Mit 3,9 mm Durchmesser ordnet sich der Bohrer in den Standard-Bereich ein und ist für zahlreiche Werkstattaufgaben prädestiniert: Dünne bis mittlere Bleche, Profile und allgemeine Metallarbeiten. Für handgeführte Akkubohrschrauber ist die kurze Ausführung vorteilhaft, weil sie die Stabilität erhöht; bei hoher Präzision empfiehlt sich ein Anpunkten mit Zentrierbohrer, um exakte Passungen zu erzielen. Für tiefe Löcher oder sehr harte Serienaufgaben sind längere oder spezialisierte Werkzeuge empfehlenswert. Fertigung, Norm und Umgang mit dem Werkstoff Der Bohrer entspricht DIN 338 und ist als geschliffener Spiralbohrer ausgeführt, was sehr scharfe Schneiden und hohe Rundlaufgenauigkeit gewährleistet. Geschliffene Bohrer (HSS-G) bieten saubere Schnittkanten und exakte Bohrbilder, sind jedoch empfindlicher gegenüber Verbiegung und sollten bevorzugt in stationären oder gut geführt eingespannten Maschinen mit geeigneter Kühlung verwendet werden. Bei der Bearbeitung von legierten Stählen und Gusseisen sorgt gezielte Kühlschmierung für längere Standzeiten. Für präzise Metallbohrungen empfehlen wir den HSS-G Kurzbohrer von MetavCUT; bei Bestellwunsch oder technischen Rückfragen erreichen Sie unsere Fachberatung per eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930. Technische Daten Artikelnummer: 45039-FDA Marke: MetavCUT Serie: Standard Line Fakten Durchmesser: 3,9 mm Gesamtlänge: 70 mm Spirallänge: 39 mm Spitzenwinkel: 135° Verpackungseinheit: 10 Besonderheiten Material: HSS-G (Schnellarbeitsstahl, geschliffen) Norm: DIN 338 Schaftausführung: geschliffen (voll geschliffener Zylinderschaft) Typ: Typ N (Normalspirale) Ausführung: kurz Farbe: blank (helles Finish) Für Bohrmaschine: Handbohrmaschine FAQ Wie eignet sich der Bohrer für Edelstahl? Der Spiralbohrer 3,9 mm HSS-G von MetavCUT (Typ N, SKU 45039-FDA) ist mit 135° Spitzenwinkel speziell für härtere Werkstoffe wie Edelstahl geeignet, weil der größere Spitzwinkel das Anbohren erleichtert und das Wandern reduziert. Kann der Bohrer in einer Handbohrmaschine eingesetzt werden? Ja, die kurze Ausführung und der geschliffene Schaft machen den Spiralbohrer 3,9 mm HSS-G von MetavCUT gut geeignet für Handbohrmaschinen; bei besonders präzisen Passungen wird ein Anpunkten empfohlen. Welche Vorteile bietet die geschliffene Fertigung? Geschliffene Spiralbohrer (HSS-G) liefern sehr scharfe Schneiden und hohe Rundlaufgenauigkeit, was zu sauberen Bohrlöchern führt; der Spiralbohrer 3,9 mm HSS-G bietet dadurch bessere Oberflächen und Maßhaltigkeit. Für welche Materialien ist dieser Bohrer besonders geeignet? Der Spiralbohrer 3,9 mm HSS-G von MetavCUT eignet sich für legierte und unlegierte Stähle, Gussstahl, Gusseisen, Sintereisen, Temperguss sowie Nichteisenmetalle und harte Kunststoffe. Warum DIN 338 relevant ist? Die Angabe DIN 338 auf dem Spiralbohrer 3,9 mm HSS-G steht für die Klassifikation kurzer Spiralbohrer mit Zylinderschaft und garantiert, dass Ausführung, Maße und Fertigungsverfahren den Normanforderungen entsprechen.
3.9mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Twist Drill — MetavCUT Type N short HSS-G, Ø 3.9 mm, 135° Point Angle, Bright Finished The Twist Drill Type N short in HSS‑G is a precision metalworking drill for Drilling Machines, engineered for stable, fast and accurate holes in hard materials. Short Design for high stability and low deflection 135° Point Angle for harder materials like Stainless Steel Fully Ground Shank for superior concentricity Compliant with DIN 338 for consistent quality Profi Line manufacture for workshop and industrial use Greater Precision and Reduced Deflection for Metalworking Dank der Short Design reduziert die kürzere Auskraglänge spürbar die Neigung zum Verbiegen, was zu präziseren Bohrungen führt. Dies ist besonders vorteilhaft beim Bohren harter Werkstoffe, da geringere Schwingungen und bessere Führung die Werkzeugstandzeit erhöhen. Die Kombination aus kleinem Auskragmaß und stabiler Konstruktion unterstützt saubere Bohrbilder und minimiert Ausbrüche an der Austrittskante. Faster Penetration and Lower Thrust with Ground Geometry Die HSS-G (Ground) Geometrie sorgt für sehr scharfe Schneidkanten; damit sind bis zu 40% schnelleres Bohren und 50% weniger Anpresskraft möglich als bei herkömmlichen HSS‑Bohrern. Geschliffene Spannuten liefern hohe Rundlaufgenauigkeit und feine Bohroberflächen. Für Anwender bedeutet das: effizientere Arbeitsgänge und geringere Belastung von Maschine und Werkstück. Designed for Tough Materials and Professional Use Dieses Werkzeug wurde für die Bearbeitung von legierten und unlegierten Steel, Gussstahl, Gusseisen, Sintereisen, Temperguss, Nichteisenmetallen und Hartkunststoff konzipiert. Die 135° Point Angle macht das Werkzeug besonders geeignet für zähe Werkstoffe, weil die Anbohrzeit verkürzt und die Zentrierstabilität erhöht wird. Anwender aus Handwerk und Industrie profitieren von reproduzierbarer Präzision bei Serien‑ oder Einzelfertigung. Compatibility, Handling and Recommended Operating Mode Der Fully Ground Shank gewährleistet exakte Spannbarkeit im Futter und sehr guten Rundlauf; die Spiral Length 39 mm und die Overall Length 70 mm sind optimal auf stationäre und bewegliche Drilling Machines abgestimmt. Nach DIN 338 gefertigt, empfiehlt sich der Einsatz mit Kühlung und bei stationärem Bohren zur Minimierung von Bruchrisiken. Bei Bedarf ist die Nutzung in Kombination mit geeigneter Kühlschmierstoffzufuhr ratsam. For precision metalworking choose the MetavCUT Twist Drill from the Profi Line — Metav Werkzeuge provides expert technical advice and personal support: 📧 info@metav-werkzeuge.com ☎️ +49 2822 7131930 ✔️ WhatsApp +49 170 2837271 Twist Drill (Spiralbohrer) Brand: MetavCUT SKU: 48039-FDA Type: Type N Diameter: 3.9 mm Point Angle: 135° Version: short Finish: bright finished Shank Finish: fully ground Material: HSS-G Norm: DIN 338 Spiral Length: 39 mm Overall Length: 70 mm For Drilling Machine: Drilling Machine Application: Drills for metal Model Series: Profi Line Manufacturer: MetavCUT Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is a Twist Drill used for? The Twist Drill from MetavCUT is primarily used for drilling high‑strength materials and large diameters; its short execution provides high stability and is well suited to metalworking tasks where precision and tool life are required. Which three drill types exist? Commonly distinguished drill types are Metal Drill, Wood Drill and Stone/Concrete Drill; the MetavCUT Type N Twist Drill belongs to the Metal Drill category and is optimised for ferrous and non‑ferrous metals. Why are Twist Drills sharpened at the tip? Sharpening the tip reduces the chisel edge width, which lowers friction and decreases required thrust. This improves centring in the workpiece and allows cleaner, more controlled drilling with the MetavCUT Twist Drill. Can a Twist Drill be used to drill wood? A Metal Drill such as the MetavCUT Twist Drill can be used in Wood, but guidance and surface finish are inferior compared with dedicated Wood Drills; the metal drill is easier to resharpen and shows less self‑feeding tendency. For which drilling depths is the Twist Drill most used? A hole drilled through solid stock is commonly performed with a Twist Drill. For diameters up to 20 mm and depths up to 100 mm, the Twist Drill is the most frequently used tool in metalworking applications. What is better, HSS or HSSE? The widespread belief that HSSE steels are categorically superior to HSS is incorrect; decide based on actual working conditions and whether the higher purchase cost of HSSE is justified for the intended application.
30,5mm HSS Spiralbohrer, 118° Spitzenwinkel, Morsekegel, schwarz, gefräst - MetavCUT
Der gefräste HSS-Bohrer kombiniert Präzision, robuste Materialeigenschaften und eine kraftschlüssige Morsekegel-Aufnahme für anspruchsvolle Metallarbeiten; nutzen Sie diese Merkmale für zuverlässig genaue Bohrungen und bestellen Sie den Bohrer direkt über Metav oder fragen Sie unsere Beratung bei Bedarf an. Spiralbohrer von MetavCUT (Morsekegel, HSS, Ø 30,5 mm) Der Spiralbohrer ist ein gefräster HSS-Bohrer, ausgelegt für präzise und stabile Bohrungen in Stahl, Guss und Nichteisenmetallen. Gefräste Spiralgeometrie für präzisen Rundlauf HSS-Material: robust bis ca. 900 N/mm² Morsekegel-Schaft für hohe Drehmomentübertragung Große Bohrung: Ø 30,5 mm, Gesamtlänge 301 mm Norm DIN 345, Standard Line, Einsetzbereit Präzise Fertigung für maßhaltige Bohrungen Die gefräste Spirale sorgt für eine klare Schneidengeometrie und einen verbesserten Rundlauf, was besonders bei großen Durchmessern zu maßhaltigen Bohrungen führt. Durch die Herstellungsart gefräst wird die Wendel aus dem vollen Material heraus gearbeitet, wodurch die Kanten scharf bleiben und der Bohrfortschritt gleichmäßiger ausfällt. Als Vorteil ergibt sich eine erhöhte Standzeit gegenüber einfacheren Fertigungsverfahren, ohne dass die Handhabung komplexer wird. Materialeigenschaften und Einsatzbereiche Das Werkstoffkonzept HSS ermöglicht das Bohren in legierten und unlegierten Stählen sowie in Gusswerkstoffen und Nichteisenmetallen. Für Werkstücke mit Zugfestigkeiten bis etwa 900 N/mm² stellt dieses Material eine wirtschaftliche und belastbare Wahl dar. Für Anwender bedeutet das konkret: weniger Werkzeugwechsel, höhere Prozesssicherheit und konstante Bohrergebnisse bei typischen Industrieanwendungen. Maschinenkompatibilität und Aufnahmevorteil Der Morsekegel-Schaft (MK) erlaubt das direkte Einspannen in passende Aufnahmen von Ständerbohrmaschinen oder Drehmaschinen mit Reitstock. Dadurch wird eine feste Verbindung erreicht, die hohe Drehmomente sicher überträgt und die Rundlaufgenauigkeit unterstützt. Gerade bei Bohrungen im größeren Bereich ist diese Lösung stabiler und zuverlässiger als die Nutzung eines normalen Bohrfutters. Sichere Anwendung bei großen Durchmessern Bei einem Durchmesser über 30 mm empfiehlt sich das beachte der schrittweisen Bearbeitung: mehrstufiges Aufbohren reduziert die Belastung der Querschneide und verbessert Spanabfuhr sowie Kühlung. In der Praxis bedeutet das weniger Vibrationen, geringeres Bruchrisiko und längere Standzeiten des Werkzeugs. Verwenden Sie geeignete Kühlschmierstoffe und passen Sie Vorschub und Drehzahl an das Werkstoffverhalten an. Einsatzempfehlung für Werkstatt und Industrie Dieses Werkzeug ist für stationäre Maschinen konzipiert und eignet sich für den Einsatz im Maschinenbau, in der Instandhaltung und in der Serienfertigung, wo Stabilität und Präzision gefragt sind. Die Kombination aus HSS, gefräster Geometrie und Morsekegel macht den Bohrer zur verlässlichen Wahl für anspruchsvolle Metallbohrungen. Sichern Sie sich den gefrästen MetavCUT HSS-Bohrer mit Morsekegel für schwere Metallarbeiten und kontaktieren Sie unsere technische Beratung per eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 für individuelle Anwendungshinweise. Produktmerkmale Hersteller: MetavCUT Artikelnummer: 51305-FDA Bezeichnung: Spiralbohrer Serie: Standard Line Norm: DIN 345 Daten Durchmesser: 30,5 mm Gesamtlänge: 301 mm Spirallänge: 181 mm Spitzenwinkel: 118° Verpackungseinheit: 1 Besonderheiten Material: HSS Ausführung: gefräst Schaftausführung: Morsekegel (MK) Farbe: schwarz Anwendung: Bohrer für Metall FAQ Für welche Werkstoffe ist dieser Bohrer geeignet? Der MetavCUT Spiralbohrer (Standard Line, SKU 51305-FDA) eignet sich für legierte und unlegierte Stähle, Grauguss, Temperguss sowie für Nichteisenmetalle und Kunststoffe; typisch sind Werkstoffe bis ca. 900 N/mm² Zugfestigkeit. Welche Maschine ist für den Einsatz erforderlich? Dank des Morsekegel-Schafts ist die Aufnahme in Ständerbohrmaschinen oder Maschinen mit passender MK-Aufnahme vorgesehen; der Spiralbohrer ist für stationäre Anwendungen und hohe Drehmomentübertragung ausgelegt. Worin unterscheidet sich die gefräste Ausführung von rollgewalzten Bohrern? Gefräste Bohrer bieten eine präzisere Schneidengeometrie und oft besseren Rundlauf, was die Standzeit und Bohrqualität verbessert; rollgewalzte Ausführungen sind dagegen häufig elastischer und günstiger beim Einsatz sehr kleiner Durchmesser. Wie sollte bei großen Durchmessern vorgebohrt werden? Bei Ø 30,5 mm empfiehlt sich ein mehrstufiges Vorgehen: mit kleineren Durchmessern vorbohren und schrittweise auf das Zielmaß aufbohren, um Querschneidebelastung und Spanprobleme zu vermeiden. Brauche ich spezielle Kühlung beim Bohren mit diesem Bohrer? Für dauerhafte Serienbearbeitung und zähe Werkstoffe ist Einsatz von Kühlschmierstoff empfohlen, um thermische Belastung zu reduzieren und die Standzeit des HSS-Werkzeugs zu erhöhen.
30,5mm Spiralbohrer, 118° Spitzenwinkel, HSS, rollgewalzt, Morsekegelschaft, 181mm Spirallänge - MetavCUT
Der rollgewalzte Spiralbohrer von MetavCUT verbindet hohe Zähigkeit mit stabiler Kraftübertragung und eignet sich besonders für stationäre Maschinen bei anspruchsvollen Metallbohrungen; durch die Morsekonus-Aufnahme bleibt die Welle sicher verankert und der Bohrer ist trotz großer Dimensionen bruchsärmer als geschliffene Varianten. Bestellen Sie den Bohrer direkt bei Metav und kontaktieren Sie uns bei Bedarf für technische Details. Spiralbohrer 30,5 mm HSS mit Morsekegel Der Spiralbohrer ist ein rollgewalzter HSS-Bohrer für robuste Metallbearbeitung auf stationären Bohrmaschinen Für stationäre Maschinen mit Morsekegelaufnahme Rollgewalzte Bauart für erhöhte Bruchsicherheit HSS-Material für Zähigkeit und Wärmebeständigkeit 118° Spitzenwinkel für kontrolliertes Eindringen Gesamtlänge 301 mm, Spirallänge 181 mm Zähigkeit und Eignung für schwere Bohraufgaben Rollgewalzte Werkstoffe erzeugen beim HSS-Spiralbohrer eine höhere Elastizität als geschliffene Ausführungen, was das Bruchrisiko bei großen Durchmessern reduziert. Bei einem Durchmesser von 30,5 mm ist diese Zähigkeit ein klarer Vorteil für das schrittweise Aufbohren in massiven Werkstoffen. Die Fertigungsweise bringt zudem Wirtschaftlichkeit in die Werkstatt, da die Werkzeuge langlebig bleiben und sich für die häufigen Standardbohrungen in Stahl, Guss und NE-Metallen bewähren. Sichere Aufnahme und Kraftübertragung dank Morsekegel Die Morsekegelaufnahme sorgt für eine kraftschlüssige Verbindung zwischen Maschine und Werkzeug; dadurch wird hohes Drehmoment sicher übertragen und der Bohrer läuft stabil. Diese Eigenschaft ist besonders bei größeren Durchmessern entscheidend, da sie die Gefahr von Verkantungen reduziert und gleichmäßige Bohrfortschritte ermöglicht. Für Anwender bedeutet das weniger Nacharbeit und eine höhere Prozesssicherheit bei der Serienbearbeitung. Materialverträglichkeit und Spitzengestaltung Der Bohrer wurde für die Bearbeitung von legiertem und unlegiertem Stahl bis ca. 900 N/mm², Gusseisen sowie Nichteisenmetallen und Kunststoffen ausgelegt. Der 118° Spitzenwinkel unterstützt das kontrollierte Eindringen in weichere Werkstoffe und verbessert das Zentrieren auf gewölbten Oberflächen. Anwender mit wechselnden Werkstoffen profitieren von der Vielseitigkeit des Werkzeugs, ohne ständig wechseln zu müssen. Wirtschaftlichkeit durch richtige Anwendung und Pflege Rollgewalzte Spiralbohrer bieten ein gutes Preis-Leistungs-Verhältnis, da sie zäher und oft günstiger sind als geschliffene Alternativen. Für tiefe oder überdurchschnittlich große Löcher empfiehlt sich ein stufenweises Aufbohren, um die Spanabfuhr zu sichern und thermische Beanspruchung zu minimieren. Regelmäßige Kühlschmierstoffzufuhr und korrekte Spanntechnik verlängern die Standzeit und reduzieren Fertigungsausfälle. Sichern Sie sich den robusten MetavCUT Spiralbohrer mit Morsekegel für langlebige Metallbohrungen; bei Fragen zu Einsatz und Kompatibilität erreichen Sie uns per eMail info@metav-werkzeuge.com oder telefonisch unter +49 2822 7131930 Produktmerkmale Bezeichnung: Spiralbohrer Artikelnummer: 54305-FDA Marke: MetavCUT Serie: Standard Line Ausführung: rollgewalzt Fakten Durchmesser: 30,5 mm Gesamtlänge: 301 mm Spirallänge: 181 mm Spitzenwinkel: 118° Verpackungseinheit: 1 Besonderheiten Material: HSS — hohe Zähigkeit und Verschleißfestigkeit Schaftausführung: Morsekegel — selbsthemmend, hohe Kraftübertragung Norm: DIN 345 Farbe: schwarz Hersteller: MetavCUT FAQ Welche Maschinenaufnahme ist für den Spiralbohrer erforderlich? Für den MetavCUT Spiralbohrer ist eine Aufnahme mit passender Morsekegelaufnahme vorgesehen; dadurch sitzt der Bohrer sicher und überträgt hohe Drehmomente zuverlässig. Für welche Werkstoffe eignet sich der MetavCUT Spiralbohrer besonders? Der MetavCUT Spiralbohrer aus HSS ist geeignet für legierten und unlegierten Stahl bis ca. 900 N/mm², Grauguss, Temperguss, Sphäroguss sowie für Nichteisenmetalle und Kunststoffe. Wie beeinflusst die rollgewalzte Ausführung die Anwendung? Die rollgewalzte Fertigung macht den Bohrer zäher und bruchsicherer, was besonders bei größeren Durchmessern den Werkzeugverschleiß reduziert und die Wirtschaftlichkeit erhöht. Welche Pflege verlängert die Standzeit des Bohrers? Regelmäßige Kühlschmierstoffzufuhr, korrektes Spannen im Morsekegel und stufenweises Aufbohren bei tiefen Löchern tragen maßgeblich zur längeren Standzeit des Bohrers bei.
30mm Spiralbohrer, 118° Spitzenwinkel, HSS, Morsekegel, gefräst, 175mm Spirallänge, schwarz - MetavCUT
Profitieren von der Kombination aus gefräster Wendel, robustem HSS-Material und der sicheren Morsekegelschaft für präzise, standfeste Bohrungen. Nutzen Sie die hohe Standzeit und die verlässliche Geometrie für stabile Serien oder Werkstattaufträge. Bestellen Sie den Spiralbohrer direkt über Metav Werkzeuge oder fragen Sie unsere Beratung bei Bedarf an. Spiralbohrer von MetavCUT – HSS mit Morsekegel Der Spiralbohrer ist ein gefräster HSS-Bohrer mit Morsekegelschaft für präzise Metallbohrungen auf stationären Maschinen Gefräst für präzise Wendelgeometrie HSS-Material für verbesserte Standzeit Morsekegelschaft für spielfreie Aufnahme 30 mm Durchmesser für Maschinenbauaufgaben Spitzenwinkel 118° für einfache Zentrierung Gefräste Geometrie für gleichmäßigen Bohrfortschritt und hohe Rundlaufgenauigkeit Die gefräste Wendel sorgt für eine präzise Spanabfuhr und eine gleichmäßige Schnittführung, was zu rundlaufgenaueren Bohrungen führt. Bei Anwendungen, bei denen Maßhaltigkeit und Oberflächenqualität zählen, bringt die gefräste Herstellung einen spürbaren Vorteil gegenüber rollgewalzten Werkzeugen. Durch die klaren Kanten der Wendel verbessert sich der Bohrfortschritt, was den Arbeitsablauf in Werkstatt und Fertigung effizienter macht. Einsatzbereich und Maschinenempfehlung für den 30 mm Durchmesser Mit einem Durchmesser von 30 mm gehört der Bohrer in den mittleren Bereich und eignet sich besonders für allgemeinen Maschinenbau und Instandsetzungsarbeiten. Die Kombination aus Morsekegelschaft und robuster Ausführung macht ihn ideal für Säulenbohrmaschinen mit MK-Aufnahme, wenn Stabilität und hohe Drehmomentübertragung verlangt werden. Für tiefe oder großvolumige Bohrungen empfiehlt sich stufenweises Aufbohren zur Entlastung der Querschneide. Materialwahl HSS und Werkstoffverträglichkeit Das HSS-Material erlaubt vielseitiges Arbeiten in legiertem und unlegiertem Stahl sowie Gusseisen, Nichteisenmetallen und Kunststoffen. Für Werkstoffe bis etwa 900 N/mm² Festigkeit bietet der Bohrer eine wirtschaftliche Lösung mit guter Standzeit. Die robuste Schneidkante verträgt moderate Kühlschmierstoffe, wodurch Wärmeentwicklung reduziert und Ausschläge im Bohrbild minimiert werden. Praktische Hinweise zur Anwendung und Standzeitoptimierung Für saubere Zentrierung empfiehlt es sich, vor allem bei präzisen Passungen, mit einem Zentrierbohrer anzupunkten. Bei größeren Bohrungsdurchmessern ist mehrstufiges Aufbohren sinnvoll, um Brüche zu vermeiden und die Spanabfuhr zu verbessern. Die Morsekegelschaft gewährleistet feste Aufnahme; zum Lösen den Austreiber gemäß Maschinenanleitung verwenden. Regelmäßige Kontrolle der Schneidengeometrie verhindert Qualitätsverluste und verlängert die Standzeit. Empfehlung: Entscheiden Sie sich für den MetavCUT Spiralbohrer Standard Line mit gefräster Wendel und kontaktieren Sie die Metav Beratung per eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 für technische Abstimmung und schnelle Lieferung. Produktmerkmale Artikelnummer: 51300-FDA Marke: MetavCUT Bezeichnung: Spiralbohrer Modellserie: Standard Line Fakten Durchmesser: 30 mm Gesamtlänge: 296 mm Spirallänge: 175 mm Spitzenwinkel: 118° Verpackungseinheit: 1 Besonderheiten Ausführung: gefräst Material: HSS Schaftausführung: Morsekegel Norm: DIN 345 Farbe: schwarz Hersteller: MetavCUT SKU: 51300-FDA FAQ Was zeichnet den gefrästen Aufbau des Bohrers aus? Der gefräste Aufbau des MetavCUT Spiralbohrers verbessert die Wendelgeometrie und führt zu präziseren, rundlaufgenaueren Bohrungen, was sich besonders bei wiederkehrenden Serienaufgaben auszahlt. Für welche Maschinen ist die Morsekegelschaft geeignet? Die Morsekegelschaft des Spiralbohrers ist für stationäre Säulenbohrmaschinen mit passender MK-Aufnahme ausgelegt und garantiert eine spielfreie, kraftschlüssige Drehmomentübertragung. Welche Werkstoffe lassen sich mit dem HSS-Spiralbohrer bearbeiten? Der HSS-Spiralbohrer von MetavCUT eignet sich für unlegierte und legierte Stähle, Gusseisen sowie Nichteisenmetalle und Kunststoffe bis zu etwa 900 N/mm² Festigkeit. Wie sollte bei großen Durchmessern vorgegangen werden? Bei größeren Bohrungen empfiehlt sich stufenweises Aufbohren und gegebenenfalls Vorbohren, um die Querschneide zu entlasten und Späne sicher abzuführen; so bleibt die Standzeit des MetavCUT Spiralbohrers höher.
30mm Spiralbohrer, 118° Spitzenwinkel, HSS, Morsekegel, rollgewalzt, 175mm Spirallänge, schwarz - MetavCUT
Profitieren Sie von der Kombination aus Zähigkeit, Maßhaltigkeit und sicherer Spannungsübertragung; die rollgewalzte HSS-Ausführung reduziert Bruchrisiken bei Standard-Metallbohrungen, die Morsekegelschaft sorgt für festen Sitz in der Ständerbohrmaschine. Bestellen Sie den MetavCUT Spiralbohrer zuverlässig über Metav und nutzen Sie bei Bedarf die technische Beratung. MetavCUT Spiralbohrer – Spiralbohrer für Metallbearbeitung Der MetavCUT Spiralbohrer ist ein rollgewalzter HSS-Bohrer mit Morsekegelschaft, ausgelegt für zuverlässige Metallbohrungen in Ständerbohrmaschinen. MetavCUT Spiralbohrer für Metallbearbeitung Rollgewalzte HSS-Ausführung bruchsicher Morsekegelschaft für sichere Spannungsübertragung 30 mm Durchmesser für schwere Bohrungen 175 mm Spiralänge für effektive Spanabfuhr Haltbare Fertigung für robuste Metallarbeiten Die rollgewalzte Herstellungsweise macht den Bohrer besonders zäh und widerstandsfähig gegen Bruch, was bei wiederholten Standardbohrungen in Baustahl oder Guss von Vorteil ist. Durch das HSS-Material bleibt die Schneide hitzebeständig und ermöglicht konstante Schnittleistungen; das resultiert in höheren Standzeiten und geringeren Produktionsunterbrechungen. Bei Anwendungen bis etwa 900 N/mm² Zugfestigkeit bietet diese Kombination ein gutes Kosten-Nutzen-Verhältnis gegenüber geschliffenen Varianten, ohne dabei unnötig empfindlich zu sein. Effiziente Spanabfuhr und präzise Schnittgeometrie Die Spiralänge von 175 mm sorgt für sichere Spanabfuhr bei mittleren bis tiefen Bohrungen, reduziert Stau und verhindert vorzeitiges Abstumpfen. Der Spitzenwinkel 118° begünstigt das Zentrieren auf flachen und leicht gewölbten Oberflächen, wodurch Anlaufrutschen minimiert wird. Für Anwender bedeutet das weniger Nacharbeit und gleichmäßigere Bohrbilder, speziell beim Bohren in Aluminium, Neusilber und unlegierten Stählen. Maschinenintegration und sichere Aufnahme Die Morsekegelschaft erlaubt das Einspannen direkt in Morsekegel-Aufnahmen von Ständerbohrmaschinen und Drehmaschinen; die Selbsthemmung sorgt für hohe Drehmomentübertragung und stabilen Lauf. Dadurch eignen sich die Werkzeuge besonders für stationäre Fertigungsumgebungen und Reparaturarbeiten, bei denen Kraftschluss und präzise Führung gefragt sind. Anwender profitieren von einfachem Wechsel und verlässlicher Kraftübertragung ohne separates Bohrfutter. Anwendungsbereiche und Anwendernutzen Dieses Werkzeug ist für allgemeine Metallbearbeitung, Instandsetzungsarbeiten und Serien kleinerer bis mittlerer Losgrößen konzipiert. Es eignet sich für Baustahl, Gusseisen, Temperguss und Nichteisenmetalle sowie für Sintereisen. Der Praxisnutzen zeigt sich in reduzierten Ausfallzeiten, planbaren Standzeiten und einer einfachen Integration in bestehende Maschinenparks; so lassen sich Arbeitsprozesse effizienter planen und Kosten langfristig senken. Empfehlung: Für robuste Metallbohrungen den MetavCUT Spiralbohrer in rollgewalzter HSS-Ausführung wählen und direkt bei Metav anfragen: info@metav-werkzeuge.com oder Telefon +49 2822 7131930 Produktmerkmale Artikelnummer: 54300-FDA Marke: MetavCUT Serie: Standard Line Bezeichnung: Spiralbohrer Norm: DIN 345 Material: HSS Zahlen Durchmesser: 30 mm Gesamtlänge: 296 mm Spiralänge: 175 mm Spitzenwinkel: 118° Verpackungseinheit: 1 Besonderheiten Ausführung: rollgewalzt — zäh, bruchsicher Schaftausfuhrung: Morsekegel — selbsthemmend, hohe Drehmomentübertragung Farbe: schwarz SKU: 54300-FDA FAQ Ist der MetavCUT Spiralbohrer für gehärtete Stähle geeignet? Der MetavCUT Spiralbohrer aus HSS und der Ausführung rollgewalzt ist primär für Stahl bis ca. 900 N/mm² vorgesehen; für höher gehärtete Stähle sind spezielle Vollhartmetallwerkzeuge empfehlenswert. Welche Maschinenaufnahme passt zum Morsekegelschaft? Die Morsekegelschaft des MetavCUT Spiralbohrers ist für Morsekegel-Aufnahmen von Ständerbohrmaschinen und Drehmaschinen ausgelegt und überträgt hohe Drehmomente sicher. Wie wirkt sich der Spitzenwinkel 118° in der Praxis aus? Der Spitzenwinkel 118° des MetavCUT Spiralbohrers erleichtert das Zentrieren und reduziert Anlaufrutschen bei weichen bis mittleren Materialien wie Aluminium und Gusswerkstoffen. Wie lange ist die Spiralänge von 175 mm praktisch nutzbar? Die Spiralänge von 175 mm unterstützt effektive Spanabfuhr bei mitteltiefen Bohrungen; die tatsächliche Nutzbarkeit hängt von Bohrtiefe, Material und Kühlschmierstoff ab. Welche Vorteile hat die rollgewalzte Herstellung gegenüber geschliffenen Bohrern? Rollgewalzte Bohrer wie der MetavCUT Spiralbohrer sind zäher und weniger bruchanfällig, was sie wirtschaftlich für Standardbohrungen macht; geschliffene Varianten bieten hingegen höhere Maßhaltigkeit bei Präzisionsaufgaben.
High-performance drill bits for demanding production
Drill bits designed for industrial manufacturing where precision, repeatability and tool life are decisive. Based on a spectrum from HSS and kobalt-alloyed hss-e for universal use to solid carbide drills for high-speed, high-precision serial production, this range covers applications from general engineering to automotive supplier work.
Why these drill bits are essential in the workshop and on the machining centre
Function and behaviour:
- primary use: creating accurate cylindrical holes
- typical machines: CNC machining centres, lathes and drill presses
- key design aspects: optimised chisel edge, defined point angles, flute geometry for reliable chip evacuation
Technical advantages and process benefits:
- reduced feed forces through optimised point geometry
- improved heat control with advanced coatings and, where specified, internal coolant supply
- extended tool life using solid carbide variants and multilayer coatings such as TiN / TiAlN
- process security on challenging materials thanks to tailored materials and geometries
Concrete benefits that boost productivity and quality
- predictable tool life and fewer tool changes, lowering machine downtime
- stable hole quality and consistent tolerances across long runs
- efficient chip control and thermal management for safe deep-hole and hardened-material drilling
- suitability across a wide material range, reducing the need for multiple specialised tools
Metav as a reliable partner for high-precision tooling
Metav combines decades of sector expertise with a broad, dependable offering from its Emmerich facility. With over 48,000 customers and more than 250,000 products, Metav positions its range of drill bits, twist drills and indexable drills as a practical, quality-first choice for procurement managers and production engineers seeking dependable supply and technical competence.
Technical data (at a glance)
- material: HSS, kobalt-alloyed hss-e, solid carbide
- coatings: TiN, TiAlN, advanced nanocoatings
- coolant option: internal coolant feed where specified
- typical applications: mild steel, high-alloy stainless steel, cast iron, non-ferrous metals, technical plastics, hardened materials (use solid carbide variants)
- tool types available: twist drills, solid carbide drills, indexable drills, centre and pilot drills, step drills
FAQ
What is the difference between hss and solid carbide drill bits?
HSS drill bits offer toughness and resistance to breakage for general machining, while solid carbide drills provide higher wear resistance and are the preferred choice for high-speed, high-volume machining and hardened materials.
Which coatings improve tool life for industrial drilling?
Coatings such as TiN and TiAlN increase surface hardness and thermal stability; when combined with the correct drill geometry and, if available, internal coolant, they significantly extend the service life of drill bits.
Can these drill bits be used on CNC machining centres for deep holes?
Yes. Drill bits designed with optimised flute geometry and internal coolant supply are suited to deep-hole machining on CNC machining centres, ensuring controlled chip evacuation and heat management.
How should I choose between twist drills, solid carbide drills and indexable drills?
Select twist drills for general-purpose drilling, solid carbide drills for high-speed and hardened-material applications, and indexable drills for large-diameter holes where insert changes offer economic advantages.
Why choose Metav for drill bits and drilling solutions?
Metav offers a comprehensive selection of drill bits, twist drills and indexable drills combined with sector expertise, centralised supply from Emmerich and proven reliability across thousands of industrial customers.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com