High-precision drills for reliable, high-throughput metalworking
Drills provide the fundamental rotating cutting solution for producing accurate cylindrical holes in materials such as structural steel, high-alloy stainless steel, cast iron, non-ferrous metals and engineering plastics, delivering consistent hole quality and extended tool life in CNC machining and turning centres. This category covers everything from classic twist drill made from high-speed steel for general machining to solid carbide drill optimised for high cutting speeds and long run times, offering advanced coatings and internal coolant options for improved heat management. By using optimised point geometries and split points the tools reduce thrust, prevent walking at the start of the cut and ensure superior surface finish, which benefits sectors from general mechanical engineering to automotive component manufacture.
3.5mm HSS Twist Drill DIN 338 ,short, roll forged, black, Type N - MetavCUT
Twist Drill — Type N, 3.5 mm, 118°, short, black, HSS, DIN 338 (MetavCUT) The Twist Drill Type N is a compact metal-drilling bit designed for precise work with a Drilling Machine or Hand Drill, offering a 3.5 mm diameter and a 118° tip angle for reliable centring and clean holes. HSS construction for durable metal drilling Short design per DIN 338 for high stability 118° tip angle for better centring on curved surfaces 3.5 mm diameter for precise, small-diameter holes Suitable for use with a Hand Drill and Drilling Machine Precision and Material Strength for Consistent Results The HSS composition delivers a combination of durability and elasticity that reduces breakage risk during typical metalworking tasks. With the 3.5 mm diameter and a 118° tip angle, the bit penetrates smoothly while maintaining accurate centring. Compliance with DIN 338 ensures consistent geometry and reliable production tolerances, making this short Twist Drill a trustworthy choice for repeatable hole quality in demanding shop environments. Short Geometry for Maximum Stability and Accuracy A short overall length and a reduced protrusion from the chuck minimise bending and vibration, improving concentricity and hole accuracy. The 39 mm spiral length and 70 mm overall length are optimised to reduce runout when used in a Drilling Machine or Hand Drill, especially for smaller diameters. This means less rework, faster setup and more precise holes when working on components where tight tolerances matter. Optimised for Metalworking — Versatile Application Range The Type N spiral profile is the classic choice for metal; the High Speed Steel manufacturing makes the bit suitable for alloyed and unalloyed steel, cast iron, non-ferrous metals and many plastics. For small diameters under 6 mm the roll-formed HSS construction reduces the chance of breakage and supports steady drilling performance. Users benefit from a tool engineered to handle standard metal-processing tasks efficiently and with predictable tool life. Who Benefits and Where to Use It This Twist Drill is aimed at professional workshops, maintenance technicians and precision hobbyists who require reliable, short-length metal-drilling performance. The compact design is especially advantageous in confined setups or on jigged components where minimal overhang is critical. Backed by the MetavCUT brand, customers gain access to technical guidance and support through METAV Werkzeuge for any application questions or complex requirements. For precision metalworking choose the MetavCUT Twist Drill Type N — for tailored advice and expert consultation contact METAV Werkzeuge at info@metav-werkzeuge.com, +49 2822 7131930 or WhatsApp +49 170 2837271 Designation: Twist Drill Brand: MetavCUT SKU: 40035-FDA Diameter: 3.5 mm Spiral length: 39 mm Overall length: 70 mm Tip angle: 118° Material: HSS (High Speed Steel) Type: Type N Execution: short Colour: black Application: Drills for metal / For Drilling Machine (Hand Drill) Standard: DIN 338 Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What materials is the Twist Drill Type N from MetavCUT suitable for? The MetavCUT Twist Drill Type N is intended primarily for metalworking; its HSS composition allows drilling in alloyed and unalloyed steel, cast iron, non-ferrous metals and many plastics while offering dependable wear resistance and consistent hole quality. How does the short execution of this MetavCUT Twist Drill improve drilling results? A short Twist Drill from MetavCUT reduces overhang and bending, which increases stability and concentricity during drilling, resulting in cleaner holes and less tool deflection when used in a Drilling Machine or Hand Drill. For what is a Twist Drill used? A Twist Drill is mainly applied to the machining of high-strength materials and for larger drill diameters. Its shape is easy to sharpen and withstands greater loads, making it suitable for demanding metalworking tasks. Which three drill types exist? The three common drill types are metal drills, wood drills and masonry/concrete drills. Why are Twist Drills sharpened at the tip? Sharpening reduces the cross-cut at the tip of the Twist Drill, which lowers friction and required feed forces; this also improves centring of the tip in the workpiece. Can a Twist Drill be used to drill wood? A metal Twist Drill can be used in wood, but guidance and finish are inferior compared with wood-specific bits; however, metal bits are easier to resharpen and show less self-feeding tendency. For which drilling depths is the Twist Drill most commonly used? Solid drilling is typically executed with a Twist Drill. For diameters up to 20 mm and drilling depths up to 100 mm, the Twist Drill is the most frequently used tool. Is HSS or HSSE better? The general belief that HSSE is always superior to HSS is incorrect; choose based on actual working conditions and whether the performance justifies higher cost.
3.5mm HSS-E Twist Drill DIN 338 ,short, 5% cobalt-alloyed, Type N - MetavCUT
Twist Drill – Short Type N, 3.5 mm, 135°, 5% Cobalt-Alloyed, HSS‑E, Fully Ground, DIN 338 (MetavCUT) The Twist Drill is a short Type N drill designed for precise metalworking in hand drills and drilling machines. Short design for high stability and precision 3.5 mm diameter for fine, precise holes 135° tip for harder materials like stainless steel 5% cobalt-alloyed HSS‑E for increased wear resistance Fully ground flutes for clean, accurate holes Engineered for precise metal drilling with reduced flex This short Twist Drill is optimised for metal applications where dimensional accuracy matters. With a 3.5 mm diameter and a 135° point angle, it reduces walking on hard surfaces and shortens the pilot time when entering stainless steel or other tough alloys. The geometry follows DIN 338, which classifies short HSS drills with a cylindrical shank. As a result, users benefit from repeatable hole position and improved concentricity when working on both stationary and portable machines. Short length and fully ground construction for stability The reduced overall length and shorter overhang translate into less deflection and improved control during drilling. The 39 mm spiral length and 70 mm overall length keep the cutting forces close to the chuck, while the Fully Ground flute geometry ensures a sharp cutting edge and excellent roundness of the hole. This combination is particularly helpful for precision tasks and reduces the risk of chattering when drilling through thicker or harder sections of metal. Material selection and wear resistance for demanding tasks Manufactured from HSS‑E with 5% cobalt-alloyed composition, this short spiral drill offers enhanced red hardness and wear resistance compared with standard HSS. The cobalt addition supports higher cutting temperatures and extends tool life in continuous or interrupted cutting conditions. Being a Type N (normal spiral) geometry, it is primarily aimed at metalworking; the flute design facilitates reliable chip evacuation for cast iron, alloyed and unalloyed steel, and many non‑ferrous metals. Practical recommendations for safe, accurate use For best results clamp the workpiece securely, select appropriate spindle speeds and use coolant for stainless and other heat‑resistant alloys. The short design suits precise workshop tasks, maintenance and production runs where hole quality and repeatability are priorities. A short spiral drill is less suitable for deep, through‑holes beyond its flute capacity; for deeper holes consider a longer, purpose‑designed drill. MetavCUT's short design is ideal for users seeking controlled, clean holes with reduced breakage risk when used with adequate support and cooling. We recommend MetavCUT's short Twist Drill for demanding metalworking — for tailored technical advice contact METAV Werkzeuge: info@metav-werkzeuge.com | Phone: +49 2822 7131930 | WhatsApp: +49 170 2837271. Technical Information Designation: Twist Drill Brand: MetavCUT SKU: 47035-FDA Type: Type N Diameter: 3.5 mm Point angle: 135° Spiral length: 39 mm Overall length: 70 mm Execution: Short Shaft finish: Fully Ground Material: HSS‑E Cobalt content / Colour: 5% cobalt-alloyed For machine: Drilling Machine / Hand Drill Model series: Standard Line Norm: DIN 338 Application: Drills for metal Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What materials is the Twist Drill by MetavCUT (Type N) suitable for? The MetavCUT Twist Drill (Type N) is primarily intended for metalworking; its HSS‑E composition with 5% cobalt‑alloying makes it suitable for alloyed and unalloyed steel, cast iron and many non‑ferrous metals. For stainless steel or other heat‑resistant materials use cutting fluid and moderate speed to preserve tool life. Which three drill types exist? Common categories are metal drills, wood drills and stone/concrete drills. The MetavCUT Twist Drill belongs to the metal drill group and is optimised for metal applications rather than woodworking or masonry.
3.5mm HSS-G Body Drill ,double sided, black finished without margin - MetavCUT
Bestellen sie den Karosseriebohrer für präzise Blech- und Stahlbohrungen mit geschliffener HSS‑G Geometrie und 135° Spitzenwinkel; die doppelseitige Ausführung erlaubt schnelles Umdrehen bei stumpfer Spitze und reduziert Stillstandzeiten, die kompakte Gesamtlänge sorgt für stabile Führung in Handbohrmaschine-Anwendungen. Bestellen sie den Karosseriebohrer direkt über Metav Werkzeuge oder fragen sie unsere Beratung bei Bedarf an. Karosseriebohrer von MetavCUT (Profi Line) Der Karosseriebohrer ist ein geschliffener HSS‑G Doppelendbohrer für präzise Blech‑ und Stahlbohrungen bei Handbohrmaschine Einsätzen Doppelendbohrer: Zwei Bohrspitzen in einem Werkzeug Geschliffenes HSS‑G für präzise Metallbohrungen 135° Spitzenwinkel für harte Werkstoffe geeignet Geeignet für Handbohrmaschine und Blecharbeiten Kompakte Länge 55 mm mit 13 mm Spirallänge Hohe Schnittqualität durch geschliffene HSS‑G Geometrie Die geschliffene HSS‑G Geometrie gewährleistet sehr scharfe Schneiden und hohe Rundlaufgenauigkeit, was saubere Bohrlöcher in Legierungen und unlegiertem Stahl bewirkt. Durch den 135° Spitzenwinkel reduziert sich das Ausbrechen an der Austrittskante bei harten Werkstoffen, sodass weniger Nacharbeit nötig ist. Ein weiterer Vorteil ist die bessere Spanbildung bei kurzen Spiralen, was die Standzeit bei stationärer Kühlung verlängert. Praktischer Nutzen der doppelseitigen Ausführung Als Doppelendbohrer bietet das Werkzeug zwei nutzbare Enden, wodurch ein schneller Wechsel bei stumpfer Spitze entfällt und die Produktivität in Serien‑ oder Montagearbeiten steigt. Die kompakte Bauform unterstützt stabile Führung auf dünnen Blechen und sorgt für weniger Verkantungen in der Handbohrmaschine, was insbesondere bei Niet‑ und Karosseriearbeiten relevant ist. Einsatzbereiche und Maschinenkompatibilität Der Karosseriebohrer ist für Bohrungen in Temperguss, Gusseisen, Nichteisenmetalle und Hartkunststoff geeignet und wurde für den Einsatz mit der Handbohrmaschine konzipiert. Die 13 mm Spirallänge bei 55 mm Gesamtlänge eignet sich besonders für Durchgangsbohrungen in dünnen bis mittleren Blechen. Bei tieferen oder hochwertigen Werkstücken empfiehlt sich stationäre Kühlung und Vorbohren gemäß Werkstoffanforderung. Handhabung, Pflege und Anwendungsempfehlungen Für optimale Ergebnisse sollte mit moderater Vorschubkraft und passender Kühlschmierstoffzufuhr gearbeitet werden; die geschliffene Schaftausführung erhöht die Steifigkeit, verlangt aber sorgfältige Positionierung vor dem Anbohren. Bei wiederholtem Einsatz in harten Werkstoffen empfiehlt sich regelmäßige Überprüfung der Schneidengeometrie und gegebenenfalls Nachschärfen oder Austausch, um Bruchgefahr zu minimieren. Die MetavCUT Profi Line Karosseriebohrer empfehlen wir für präzise Blecharbeiten; Bestellungen und technische Beratung per eMail info@metav-werkzeuge.com oder telefonisch +49 2822 7131930 Produktmerkmale Bezeichnung: Karosseriebohrer Marke: MetavCUT Serie: Profi Line SKU: 59035-FDA Fakten Durchmesser: 3,5 mm Gesamtlänge: 55 mm Spirallänge: 13 mm Spitzenwinkel: 135° Besonderheiten Material: HSS‑G Ausführung: doppelseitig (Doppelendbohrer) Schaft: geschliffen Farbe: schwarz ohne Fase Verwendung: Handbohrmaschine Verpackungseinheit: 10 Stück Anwendung: Bohrer für Metall FAQ Für welche Materialien eignet sich der Karosseriebohrer am besten? Der MetavCUT Karosseriebohrer mit HSS‑G Geometrie eignet sich besonders für unlegierten Stahl, legierten Stahl, Gusseisen, Nichteisenmetalle und Hartkunststoff; die Kombination aus 135° Spitzenwinkel und geschliffener Schneide sorgt für saubere Bohrlöcher in diesen Werkstoffen. Kann der Karosseriebohrer in einer Handbohrmaschine verwendet werden? Ja, die Ausführung des Karosseriebohrers ist auf die Verwendung in einer Handbohrmaschine ausgelegt; durch die kompakte Gesamtlänge von 55 mm und die geschliffene Schaftgeometrie erhält die Bohrung zusätzliche Stabilität bei Handbetrieb. Was bedeutet doppelseitig beim Karosseriebohrer und welchen Vorteil bringt das? Doppelseitig bedeutet, dass der Karosseriebohrer an beiden Enden eine Bohrspitze hat, was einem schnellen Umdrehen bei stumpfer Spitze gleichkommt und damit Ausfallzeiten reduziert; dieses Merkmal ist besonders nützlich in Montage‑ und Karosserieanwendungen. Wie wirkt sich der Spitzenwinkel von 135° auf die Bohrleistung aus? Der 135° Spitzenwinkel des MetavCUT Karosseriebohrers verringert das Einbruchrisiko an der Austrittskante und eignet sich daher besser für härtere Werkstoffe, wodurch die Nacharbeit an der Bohrstelle reduziert wird. Welche Pflegehinweise sind für den Karosseriebohrer empfohlen? Für lange Standzeiten sollte der Karosseriebohrer trocken gehalten und bei Bedarf mit Kühlschmierstoff verwendet werden; regelmäßige Sichtprüfung der Schneiden und gegebenenfalls Nachschärfen verlängern die Einsatzzeit und reduzieren Bruchrisiko.
3.5mm HSS-G Body Drill ,double sided, bright finished - MetavCUT
Karosseriebohrer (Body Drill) — 3.5 mm, 135° Tip, Double‑Sided, Bright Finished, Fully Ground, HSS‑G The Karosseriebohrer is a precision Body Drill designed for metalworking applications, offering a 3.5 mm Diameter, 135° Point Angle and a double‑sided execution with a bright finished surface and fully ground shaft for reliable performance. Double‑ended design for extended tool life Fully ground HSS‑G for precise, clean holes 135° Point Angle optimised for harder metals Suitable for Drilling Machine and Hand Drill use Compact overall length of 55 mm for confined spaces Maximum cutting performance with fully ground HSS‑G The fully ground HSS‑G construction delivers a clear benefit: faster penetration and improved hole quality in metal. CNC grinding creates sharp cutting edges and high concentricity, which reduces wobble and produces clean, round holes. For users requiring precise results in alloyed or unalloyed Steel, Cast Steel, Cast Iron or non‑ferrous Metals, this basis of construction reduces the needed feed force and raises productivity without sacrificing accuracy. Double‑ended design for practical durability in bodywork A double‑sided, short Twist Drill is particularly practical in sheet‑metal and body applications: when one tip becomes blunt, the tool can simply be reversed, offering effectively two operational ends. This space‑saving and cost‑efficient solution is well suited for work on thin sheets, rivet holes and repair operations where quick tool change and robustness matter. 135° point for harder materials and stable centring The 135° Point Angle reduces walking and offers better centring on harder materials like stainless Steel; a larger tip angle shortens the time to engage the workpiece. When paired with the ground flute geometry, this Karosseriebohrer achieves lower friction at the tip and more consistent chip evacuation. For demanding drilling tasks, combine coolant and moderate speeds to balance performance and tool life. Designed for professionals in confined and metalworking environments With an overall length of 55 mm and a 3.5 mm Diameter, this tool from the Standard Line by MetavCUT is aimed at metalworkers, bodyshop technicians and maintenance professionals who require compact, reliable Twist Drills for production and repair. The bright finished surface supports smooth insert and removal, while the robust geometry keeps cycle times short and hole quality high. Choose the MetavCUT Karosseriebohrer with 135° Point Angle for dependable metal drilling — for tailored advice or specification support METAV Werkzeuge provides expert consultation by eMail at info@metav-werkzeuge.com, by Phone +49 2822 7131930 or via WhatsApp +49 170 2837271 Designation: Karosseriebohrer Marke: MetavCUT SKU: 58035-FDA Diameter: 3.5 mm Overall Length: 55 mm Spiral Length: 13 mm Point Angle: 135° Execution: Double‑sided Shaft Finish: Fully ground Material: HSS‑G For Machine: Drilling Machine / Hand Drill Colour: Bright finished Model Series: Standard Line Application: Drills for Metal Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the Karosseriebohrer Twist Drill used for? The Karosseriebohrer from MetavCUT is a Twist Drill primarily used for machining high‑strength materials and larger drill diameters in metalworking. Its double‑ended design and ground HSS‑G geometry make it suitable for bodywork, thin‑sheet holes and tasks that demand quick reversal of a blunt tip while maintaining precision. Which 3 drill types are there? There are three common drill categories: Metal drills, Wood drills and Stone/Concrete drills. The MetavCUT Karosseriebohrer is classified as a Metal drill (Twist Drill) tailored to metal applications rather than wood or masonry.
3.5mm HSS-G Twist Drill DIN 1869 ,extra long, bright finished - MetavCUT
Die Kombination aus HSS-G-Geschliff, Gesamtlänge 165 mm und Tieflochspirale ermöglicht präzise und tiefe Bohrungen in Stahl und Gusswerkstoffen; die geschliffene Ausführung reduziert Anpresskraftbedarf und verbessert die Rundlaufgenauigkeit. Bestellen Sie den Spiralbohrer direkt über Metav Werkzeuge oder fragen Sie unsere Beratung bei Bedarf an. Spiralbohrer 3,5 mm (MetavCUT) – extra lang Der Spiralbohrer ist für tiefe Bohrungen in Metall konzipiert und eignet sich für Handbohrmaschine und stationäre Anwendungen, insbesondere bei legierten und unlegierten Stählen. Geschliffener HSS-G für saubere Bohrlöcher Extra lange Gesamtlänge 165 mm für tiefe Bohrungen 135° Spitzenwinkel für harte Werkstoffe Tieflochspirale für verbesserte Spanabfuhr Geeignet für Handbohrmaschine und stationäre Maschinen Präzision und Materialeigenschaften für saubere Bohrlöcher Der geschliffene HSS-G-Schaft sorgt für sehr scharfe Schneiden und eine hohe Rundlaufgenauigkeit, was saubere und maßhaltige Bohrlöcher in Stahl, Gussstahl und Gusseisen ermöglicht. Die CNC-geschliffene Geometrie reduziert das Wandern beim Anbohren und erhöht die Standzeit unter kontrollierten Bedingungen. Für das Bohren in schwer zerspanbaren Werkstoffen empfiehlt sich die Verwendung von Kühlschmierstoff, um Hitzeentwicklung zu minimieren und die Bruchgefahr bei geschliffenen Kanten zu verringern. Tiefe Bohrungen sicher und wirtschaftlich ausführen Mit einer Gesamtlänge 165 mm und einer Spirallänge 115 mm ist dieser Spiralbohrer speziell für extra tiefe Bohrungen ausgelegt, bei denen Standardlängen nicht ausreichen. Die Tieflochspirale verbessert die Spanabfuhr auch bei längeren Bohrungen, reduziert Nacharbeit und erhöht die Prozesssicherheit. Bei sehr tiefen Löchern empfiehlt sich die schrittweise Bohrung und regelmäßige Spanableitung, damit die effiziente Schnittfähigkeit erhalten bleibt. Optimierte Geometrie für harte Werkstoffe Der 135° Spitzenwinkel verkürzt die Anbohrphase in harten Werkstoffen und reduziert den Vorschubbedarf; das resultiert in bis zu 40 % schnellerem Bohren und bis zu 50 % weniger Anpresskraft im Vergleich zu herkömmlichen HSS-Varianten unter ähnlichen Bedingungen. Diese Vorteile machen den Bohrer zur wirtschaftlichen Wahl für anspruchsvolle Metallbearbeitung, insbesondere wenn saubere Passungen und genaue Bohrmaße gefordert sind. Praxisempfehlung für Werkstatt und Montage Der Durchmesser positioniert den Bohrer im Standard-Bereich, ideal für den Alltag in Werkstatt, Montage und DIY-Projekten. Vor dem Bohren wird punktuelles Anreißen empfohlen, um das Wandern zu vermeiden; bei legierten Stählen ist Kühlschmierstoff sinnvoll. Für stationäre Arbeiten liefert die Kombination aus geschliffener Schaftausführung und stabiler Aufnahme die beste Performance, während bei Handbohrmaschine auf ruhige Führung und angemessene Drehzahl geachtet werden sollte. Empfehlen wir: Den MetavCUT Spiralbohrer als solide Lösung für tiefe Metallbohrungen direkt über Metav Werkzeuge bestellen oder unsere technische Beratung per eMail info@metav-werkzeuge.com kontaktieren Produktmerkmale Artikelnummer: 32035-FDA Marke: MetavCUT Bezeichnung: Spiralbohrer Ausführung: extra lang Modellserie: Standard Line Daten Durchmesser: 3,5 mm Gesamtlänge: 165 mm Spirallänge: 115 mm Spitzenwinkel: 135° Verpackungseinheit: 10 Besonderheiten Material: HSS-G (geschliffen, hohe Schärfe) Norm: DIN 1869 Schaftausführung: geschliffen Farbe: blank Für Bohrmaschine: Handbohrmaschine Anwendung: Bohrer für Metall SKU: 32035-FDA FAQ Für welche Materialien eignet sich der Bohrer am besten? Der MetavCUT Spiralbohrer mit HSS-G-Material und 135° Spitzenwinkel eignet sich besonders für legierten und unlegierten Stahl, Gussstahl, Gusseisen und Nichteisenmetalle sowie Hartkunststoff; bei zähen Werkstoffen wird Kühlschmierstoff empfohlen. Ist der Bohrer für Handgebrauch geeignet? Ja, der Bohrer ist für die Verwendung mit Handbohrmaschine geeignet, da der Durchmesser in den Standard-Bereich fällt; dennoch empfiehlt sich bei tiefen Bohrungen eine stationäre Führung oder ruhige Handhabung zur Vermeidung von Verkantung. Welche Vorteile bringt die geschliffene Ausführung? Die geschliffene Schaftausführung des Spiralbohrers sorgt für sehr scharfe Kanten und hohe Rundlaufgenauigkeit, was präzisere Bohrlöcher und eine effizientere Spanabfuhr ermöglicht; als Trade-off ist eine kontrollierte Anwendung und Kühlung ratsam. Wie tief darf ich mit diesem Bohrer sicher bohren? Dank der Tieflochspirale und der langen Arbeitslänge sind extra tiefe Bohrungen möglich; für sehr tiefe Löcher empfiehlt sich schrittweises Aufbohren und regelmäßige Spanableitung, um Verstopfungen zu vermeiden. Worauf ist bei der Drehzahl und dem Vorschub zu achten? Bei härteren Werkstoffen wie legiertem Stahl reduziert der 135° Spitzenwinkel die Anbohrzeit, dennoch sollten Drehzahl und Vorschub materialgerecht angepasst werden und Kühlschmierstoff eingesetzt werden, um die Standzeit zu erhöhen.
3.5mm HSS-G Twist Drill DIN 1869 ,extra long, bright finished - MetavCUT
Twist Drill — HSS‑G Extra Long, 3.5 mm, 135° (Bright Finished, Fully Ground Shank, DIN 1869) The Twist Drill is an extra‑long HSS‑G metal drill designed for deep, precise holes in hard materials when used with a Drilling Machine. Extra‑long design for deep hole drilling HSS‑G for high performance in hard metals 135° Point Angle for stainless steel and alloys Fully ground shank for concentricity and precision DIN 1869 standard for demanding industrial use Faster penetration and lower feed force for efficient machining The Twist Drill from MetavCUT combines an HSS‑G material composition with a ground flute geometry that enables up to 40% faster drilling and requires approximately 50% less feed force compared with conventional HSS drills. This efficiency reduces operator effort and tool wear during repetitive Metalworking tasks, making it particularly suitable for workshops and maintenance operations where throughput matters. The performance advantage translates directly into shorter cycle times and more predictable production. Precise holes thanks to CNC grinding and optimised point geometry A fully ground shank and flutes produce a very sharp cutting edge and excellent run‑out behaviour, resulting in cleaner, more accurate holes in tough materials. The 135° Point Angle is optimised for harder materials such as Stainless Steel and alloyed Steels, shortening initial entry time and improving centring. For users unfamiliar with grinding terminology: “fully ground” means the flutes are shaped by CNC grinding rather than rolled, which yields higher concentricity and superior hole finish at the cost of higher brittleness under misuse. Built for deep and hard‑to‑reach drilling applications With an Overall Length of 210 mm and a Spiral Length of 145 mm, this extra‑long design is intended for deep hole drilling and access into recessed or hard‑to‑reach areas. The geometry follows DIN 1869 for deep‑hole twist drills and is frequently employed for diameters up to 20 mm and depths approaching 100 mm in many metalworking scenarios. Users should employ adequate clamping and coolant when drilling deep holes to preserve tool life and maintain hole quality. Clear suitability and targeted user groups This tool addresses the needs of professional machinists, maintenance technicians, toolroom staff and industrial workshops that require reliable metal drilling performance. The combination of HSS‑G material, sharp CNC grinding and a specialised point angle makes it a good choice for drilling Legated and Unlegated Steel, Cast Iron, Sintered Iron and certain Non‑Ferrous Metals. For hobbyists, the drill can be used in a bench or hand Drilling Machine when setup and coolant are applied correctly. For demanding deep‑hole metalworking we recommend MetavCUT’s extra‑long Twist Drill — for individual technical advice and application support contact METAV Werkzeuge via info@metav-werkzeuge.com, phone +49 2822 7131930 or WhatsApp +49 170 2837271 Designation: Twist Drill Brand: MetavCUT SKU: 33035-FDA Model Series: Standard Line Diameter: 3.5 mm Overall Length: 210 mm Spiral Length: 145 mm Point Angle: 135° Material: HSS‑G Standard: DIN 1869 Execution: Extra long Shank Finish: Fully ground Finish / Colour: Bright finished For Machine: Drilling Machine (Hand Drill) Application: Drills for Metal Packaging Unit: 10 Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the MetavCUT Twist Drill used for? The MetavCUT Twist Drill is primarily applied in the machining of high‑strength materials and when larger drill diameters are required; its form is easy to sharpen and it withstands substantial loads, which makes it suitable for demanding Metalworking tasks. Which three basic drill types exist? For general use, drill types are categorised as Metal Drill, Wood Drill and Stone/Masonry Drill; the MetavCUT Twist Drill belongs to the Metal Drill category and is optimised for metals. Why are Twist Drill tips often re‑ground? Re‑grinding the tip of a MetavCUT Twist Drill reduces the cross‑cut at the tip, lowering friction and thus the required feed force while improving centring and drilling control. Can a Metal Twist Drill be used for Wood? A Metal Drill such as the MetavCUT Twist Drill can be used in Wood, but guidance and finish are inferior compared with dedicated Wood Drills; however, Metal Drills are easier to re‑sharpen and show less self‑feeding tendency.
3.5mm HSS-G Twist Drill DIN 1869 ,extra long, bright finished - MetavCUT
Der MetavCUT Spiralbohrer in HSS-G-Ausführung kombiniert hohe Schnittgeschwindigkeit, extra lange Bauform und präzisen CNC-Schliff zu einer Lösung für tiefe Metallbohrungen; die geschliffene Geometrie sorgt für saubere Bohrbilder und die Tieflochspirale nach DIN 1869 ermöglicht sichere Spanabfuhr unter erschwerten Bedingungen, bei Bedarf technische Beratung direkt über Metav anfordern. Spiralbohrer von MetavCUT, HSS‑G, 3,5 mm Spiralbohrer von MetavCUT für Metallbohrungen, extra lange Ausführung für tiefe und schwer zugängliche Löcher MetavCUT HSS‑G Ausführung für Stahl und Guss Extra lange Bauform, Gesamtlänge 265 mm Geschliffene Schaftausführung für hohe Rundlaufgenauigkeit Tieflochspirale nach DIN 1869 für bessere Spanabfuhr Spitzenwinkel 135° optimiert für härtere Werkstoffe Mehr Leistung bei anspruchsvollen Metallbohrungen Die HSS-G-Legierung bietet deutlich reduzierte Anpresskraft und ermöglicht laut Hersteller ein bis zu 40 % schnelleres Bohren bei gleichzeitig 50 % geringerer Anpresskraft im Vergleich zu herkömmlichen HSS-Varianten. Für Anwender bedeutet das messbar kürzere Taktzeiten und weniger Ermüdung beim Bohren in legiertem und unlegiertem Stahl sowie in Gusswerkstoffen. Die Kombination aus geschliffener Geometrie und Tieflochspirale liefert saubere, präzise Bohrbilder und erleichtert das Nachbearbeiten. Präzision und Handhabung durch geschliffene Verarbeitung Die voll geschliffene Schaft- und Spiralgeometrie resultiert in scharfen Schneiden und hoher Rundlaufgenauigkeit, was besonders bei Passungsbohrungen relevant ist. Diese Qualität bietet Vorteile in der Serienfertigung und bei anspruchsvollen Einzelteilen. Wegen der höheren Sprödigkeit geschliffener Werkzeuge empfiehlt sich der Einsatz mit geeigneter Kühlung und, wo möglich, eine Spannvorrichtung oder stationäre Aufnahme, um die Lebensdauer zu maximieren. Extra lange Bauform für tiefe Bohrungen Mit einer Gesamtlänge 265 mm und einer Spirallänge 180 mm ist die Ausführung speziell für tiefe Bohrungen ausgelegt, bei denen Standardlängen an ihre Grenzen stoßen. Die Tieflochspirale nach DIN 1869 verbessert die Spanabfuhr deutlich und reduziert die Gefahr von Verstopfungen in langen Bohrgängen. Für sichere Ergebnisse empfehlen sich moderate Vorschübe, ausreichende Kühlung und bei sehr langen Bohrtiefen schrittweises Aufbohren. Einsatzzwecke und Zielgruppe Die Ausführung richtet sich an Werkstätten, Metallbauer und anspruchsvolle Heimwerker, die präzise Bohrungen in Grauguss, legierten und unlegierten Stahl bis 1000 N/mm², Gusseisen sowie Nichteisenmetalle und Hartkunststoffe ausführen müssen. Die Kombination aus MetavCUT-Qualität und Standard Line Verarbeitung macht den Bohrer zur praktischen Wahl für Anwender, die auf Verlässlichkeit und lange Einsatzfähigkeit setzen. Empfehlung: Auf die extra lange MetavCUT HSS‑G Ausführung setzen und für tiefe Metallbohrungen direkt über Metav beziehen — telefonisch +49 2822 7131930 oder per eMail info@metav-werkzeuge.com; SKU 34035‑FDA verfügbar. Produktmerkmale Artikelnummer: 34035-FDA Marke: MetavCUT Serie: Standard Line Bezeichnung: Spiralbohrer Daten Durchmesser: 3,5 mm Gesamtlänge: 265 mm Spirallänge: 180 mm Spitzenwinkel: 135° Verpackungseinheit: 10 Besonderheiten Material: HSS-G Norm: DIN 1869 Ausführung: extra lang Schaftausführung: geschliffen Farbe: blank Für Bohrmaschine: Handbohrmaschine FAQ Ist der Bohrer für Edelstahl und gehärtete Werkstücke geeignet? Der MetavCUT Spiralbohrer HSS‑G 3,5 mm (SKU 34035‑FDA) ist für gehärtete Werkstoffe bis etwa 1000 N/mm² ausgelegt; durch den Spitzenwinkel 135° lässt sich die Anbohrung bei härteren Materialien verbessern, Kühlung und angepasste Schnittparameter sind jedoch erforderlich. Kann der Bohrer mit einer Handbohrmaschine verwendet werden? Ja, die Ausführung erlaubt den Einsatz mit einer Handbohrmaschine, allerdings empfiehlt das Standard Line Werkzeug bei der extra langen Bauform eine stabile Führung oder Spannvorrichtung, um Ablenkungen und Bruchrisiken zu minimieren. Was bedeutet geschliffen im Vergleich zu gewalzt? Bei geschliffenen Spiralbohrern wie dem MetavCUT Modell erfolgt die Formgebung der Spannuten durch CNC‑Schliff; das Ergebnis sind scharfe Kanten und hohe Rundlaufgenauigkeit, allerdings mit höherer Sprödigkeit im Vergleich zu gewalzten Bohrern. Wie tief lassen sich Löcher mit dieser Ausführung bohren? Die Gesamtlänge 265 mm und die Spirallänge 180 mm sind für tiefe Bohrungen ausgelegt; für besonders tiefe oder kritische Anwendungen empfiehlt sich schrittweises Aufbohren und kontinuierliche Kühlung, um Spanbildung und Erwärmung zu vermeiden. In welcher Verpackungsgröße wird der Bohrer geliefert? Der MetavCUT Spiralbohrer HSS‑G 3,5 mm wird in der Verpackungseinheit 10 geliefert (SKU 34035‑FDA), geeignet zur Versorgung von Werkstattarbeitsplätzen und für kleinere Serien.
3.5mm HSS-G Twist Drill DIN 1897 ,extra short, bright finished, Type N - MetavCUT
Twist Drill Type N — extra short, Ø 3.5 mm, 135°, bright finished, HSS‑G, DIN 1897 The Twist Drill Type N is an extra short HSS‑G drill bit designed for precision metalworking with hand Drilling Machines in confined spaces. Extra short HSS‑G design for high stability 135° point angle for hard materials Cylindrical shank for universal chuck fit Ideal for hand and angle Drills in tight spaces Conforms to DIN 1897 for consistent quality Faster, more controlled drilling for demanding metalwork The extra short geometry reduces flex and breakage risk when working with metal, delivering a more stable cutting action compared with standard lengths. The ground HSS‑G cutting edges enable up to a 40% faster drilling speed and require about 50% less axial force, which translates into reduced operator fatigue and more reliable hole quality. This makes the bit particularly suitable where precision and repeatability are required. Robust tip and geometry for hard materials A 135° point angle combined with the Type N normal spiral provides better centring and reduced walking in harder steels and stainless alloys. The blunter tip shortens the initial penetration time and distributes cutting loads, so drilling into tougher materials like tempered or alloyed steels becomes more efficient. This geometry helps to extend tool life while maintaining consistent hole geometry. Universal fit and practical handling in confined spaces The drill features a cylindrical shank that fits standard three‑jaw chucks, offering broad compatibility with typical hand and angle Drilling Machines. With a total length of 52 mm and a spiral length of 20 mm, the compact form factor is ideal for shallow holes, sheet metal, profiles and situations where access is limited. The bright finished surface aids chip evacuation and makes bit handling straightforward on the bench. Application focus and recommended uses Manufactured to DIN 1897 from HSS‑G, this Twist Drill is designed for drilling Alloyed and Unalloyed Steel, Cast Steel, Cast Iron, Sintered Iron and Non‑Ferrous Metals, as well as Hard Plastics. The extra short design is particularly advantageous when working with thin‑walled components or when the setup cannot accommodate longer tools. Users seeking a robust, easy‑to‑control solution for metal drilling will find reliable performance with this geometry and material combination. We recommend the MetavCUT Type N extra short Twist Drill for precision metalworking; for product advice or technical data contact METAV Werkzeuge — Email: info@metav-werkzeuge.com — Phone: +49 2822 7131930 — WhatsApp: +49 170 2837271 Technical Information Designation: Twist Drill Brand: MetavCUT SKU: 56035‑FDA Diameter: 3.5 mm Point angle: 135° Type: Type N Material: HSS‑G Execution: extra short Colour: bright finished Shank execution: cylindrical Spiral length: 20 mm Total length: 52 mm Norm: DIN 1897 Model series: Standard Line Application: Drills for metal For drilling machine: Drilling Machine Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the MetavCUT Twist Drill Type N mainly used for? The MetavCUT Twist Drill Type N is primarily used for drilling in high‑strength materials and larger diameters; its extra short design is well suited to metalworking tasks where stability and reduced breakage are important. Can the MetavCUT Twist Drill Type N be used with a hand Drilling Machine? Yes, the MetavCUT Twist Drill Type N with a cylindrical shank is intended for use in common hand Drilling Machines and angle drills, offering universal chuck compatibility for workshop and on‑site applications. What are Twist Drills used for? Twist Drills are mainly applied to the machining of high‑strength materials and larger drill diameters; their form is easy to re‑grind and they withstand considerable loads. Which three drill types are there? The three main drill types are metal drills, wood drills and stone/concrete drills. Why are Twist Drills sharpened? Sharpening reduces the cross‑cut at the tip of the Twist Drill, which lowers friction and therefore reduces the required feed forces while improving centring in the workpiece. Can a metal drill be used to drill wood? A metal drill can be used in wood, but guidance and finish are inferior compared with dedicated wood drills; metal drills are easier to re‑grind and have less self‑feeding action.
3.5mm HSS-G Twist Drill DIN 338 ,fully ground, silver - MetavCUT
Twist Drill — HSS-G, 3.5 mm, 118° point, Hexagonal Shank, Fully Ground, Silver, DIN 338 (MetavCUT) The Twist Drill delivers precise metal drilling for portable and stationary Drilling Machines with a 3.5 mm diameter and a 118° point angle, designed for demanding machining tasks. Fully Ground geometry for precise holes Hexagonal Shank for secure bit holders Optimised for metal: HSS-G material Conforms to DIN 338 for short twist drills Compatible with Hand and portable Drilling Machines Durable HSS-G Material for Reliable Metalworking This twist drill uses HSS-G (high-speed steel, ground), a material chosen for strength and cutting performance when machining metals. The ground flute geometry produces very sharp cutting edges and high concentricity, which helps achieve clean, precise holes in alloyed and unalloyed steel, cast materials and non-ferrous metals. Because the cutting edges are produced by CNC grinding rather than rolling, the tool cuts more efficiently, reducing the required feed force and improving surface finish for subsequent operations. Efficient Cutting Geometry that Saves Effort Engineered with a 118° point angle and fully ground flutes, the bit centres easily and penetrates softer metals and mixed materials with controlled chip evacuation. The specific grind reduces friction and can enable up to faster drilling rates compared with roll-formed equivalents while requiring less axial force. For professionals working on production or maintenance tasks, this means more consistent hole quality and reduced operator strain during repetitive drilling. Fast, Secure Changeover with Hexagonal Shank A Hexagonal Shank design ensures form-fit torque transmission in quick-change holders and bit chucks commonly found on cordless drivers and workshop holders. This improves resistance to cam-out and simplifies tool changes without compromising compatibility with standard chucks. The fully ground finish and silver surface also aid visibility of wear, assisting timely tool inspection and maintenance. Optimised Dimensions and Machine Compatibility With a 3.5 mm diameter, Flute Length 39 mm and Total Length 90 mm, this twist drill is dimensioned for through-holes and moderate-depth bores in metalworking tasks. Conformity to DIN 338 classifies this as a short twist drill suitable for both stationary machine tools and portable use, depending on application and coolant provision. For best results, use appropriate speeds, feeds and cooling when drilling hard materials to extend tool life. Strong recommendation: For precise metal drilling tasks, choose the MetavCUT Twist Drill with Fully Ground geometry; METAV Werkzeuge offers expert consultation if you are unsure whether this tool suits your application — eMail: info@metav-werkzeuge.com — Tel: +49 2822 7131930 — WhatsApp: +49 170 2837271 Designation: Twist Drill / Spiralbohrer Brand: MetavCUT SKU: 57035-FDA Diameter: 3.5 mm Point angle: 118° Material: HSS-G (ground high-speed steel) Finish / Version: fully ground (geschliffen) Colour: Silver Shank: Hexagonal Flute length: 39 mm Total length: 90 mm Application: Drills for metal / Bohrer für Metall Model series: Standard Line Norm: DIN 338 For use in: Handbohrmaschine / Drilling Machine Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What are Twist Drills used for? Twist Drills from MetavCUT are primarily applied to machining high-strength materials and larger drill diameters; their ground geometry is easy to resharpen and withstands higher loads, which makes them suitable for demanding metalworking tasks. Which 3 drill types exist? Common drill categories are Metal drills, Wood drills and Masonry/Concrete drills; the MetavCUT Twist Drill belongs to the metal drill family and is optimised for use in metalworking. Is the MetavCUT Twist Drill suitable for cordless drills? The MetavCUT Twist Drill with a Hexagonal Shank is compatible with quick-change holders and many cordless drivers, offering secure torque transmission; however, for heavy-duty metalwork a stationary Drilling Machine or proper cooling is recommended for best tool life. Why choose a fully ground MetavCUT Twist Drill over rolled versions? A fully ground Twist Drill from MetavCUT provides sharper edges and higher runout accuracy, leading to cleaner holes and often faster drilling with less feed force, though careful handling and cooling are advised to avoid brittle fracture.
3.5mm HSS-G Twist Drill DIN 338 ,left cutting - MetavCUT
Twist Drill – Left‑Cutting HSS‑G, 3.5 mm, 135° (DIN 338) | MetavCUT Profi Line The Twist Drill is a left‑cutting HSS‑G metal drill designed for use in Drilling Machines and Hand Drills for efficient extraction and machining of high‑strength materials. MetavCUT Profi Line Twist Drill Left‑cutting geometry for screw extraction HSS‑G material for high wear resistance 135° tip angle for hard metals like stainless steel Conforms to DIN 338 for short twist drills Engineered for faster, lower‑force metal drilling The Twist Drill from MetavCUT delivers a measurable Productivity advantage: the specially ground Left‑cutting geometry enables up to 40% faster drilling while requiring 50% less axial force compared with conventional HSS variants. This means less operator fatigue and more consistent hole quality when working with challenging materials. The 135° Tip Angle reduces initial skiving and shortens plunge time in hard substrates, making the tool particularly suited for demanding Metalworking tasks. Designed for extraction and tough applications Left‑cutting design is particularly effective when removing broken or seized screws because the counter‑rotation can engage and withdraw lodged fasteners. The MetavCUT Profi Line Twist Drill is recommended for a wide range of metals including Alloyed and Unalloyed Steel, Cast Steel, Cast Iron, Sintered Iron, Temperguss, Non‑Ferrous Metals and Hard Plastics. Use in a Drilling Machine with left‑hand rotation allows the special grind to perform as intended and increases the chance of extracting screw remnants during drilling. Material choice and what it means for longevity Constructed from HSS‑G (High‑Speed Steel, ground), this Twist Drill offers a balance between edge retention and re‑sharpenability for metalworking. Ground HSS enables a consistently sharp cutting geometry that supports higher feed rates and improves surface finish in the workpiece. For users who require repeatable performance and straightforward maintenance, the HSS‑G construction simplifies resharpening while maintaining cutting stability under continuous use. Compliance with standards and practical guidance The tool adheres to DIN 338, the specification for short Twist Drills with cylindrical shank produced from High‑Speed Steel; this ensures dimensional consistency and interchangeability in professional settings. The 3.5 mm Diameter and 135° Tip Angle are tailored for applications where centred start and reduced skidding are required on hard materials such as stainless steel. If unsure whether left‑cutting geometry fits your machine or task, METAV Werkzeuge offers competent technical advice and application support to confirm suitability before purchase. We strongly recommend the MetavCUT Profi Line Twist Drill for professional metalworking tasks and for operations requiring left‑cutting performance; for personalised technical guidance contact METAV Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 (WhatsApp +49 170 2837271) Twist Drill Brand: MetavCUT SKU: 60035-FDA Diameter: 3.5 mm Tip angle: 135° Execution: Left‑cutting (linksschneidend) Material: HSS‑G Norm: DIN 338 For use in: Drilling Machine / Hand Drill Application: Drills for metal Model series: Profi Line Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is a Twist Drill used for? A MetavCUT Twist Drill (Twist Drill, metal drill) is mainly used for machining high‑strength materials and for larger bore diameters where robust cutting geometry is required. The left‑cutting variant is especially helpful when extracting broken or jammed screws, because the counter‑rotation often helps to turn out the screw remnant while drilling. The ground HSS design also supports faster drilling with lower feed forces. Which three drill types exist? Three common drill categories are: Metal Drills, Wood Drills, and Stone/Concrete Drills. The MetavCUT Twist Drill belongs to the Metal Drill category and is optimised for metalworking applications in both stationary and portable Drilling Machines. Can the MetavCUT Twist Drill be used in a hand drill? Yes, the MetavCUT Twist Drill is suitable for use in a Hand Drill as long as the machine supports left‑hand rotation for the left‑cutting execution; when used properly, it delivers reliable hole quality and can assist in screw extraction tasks. If unsure about compatibility, METAV Werkzeuge provides expert consultation to match tool and machine.
3.5mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Twist Drill — Type N Short HSS‑G, 3.5 mm, 135°, Bright Finished The Twist Drill short Type N is a precision metalworking drill for Drilling Machines and hand drilling tasks, offering a 3.5 mm diameter and a 135° point angle for reliable performance in harder materials. High‑speed Cutting with HSS‑G for faster drilling Short design per DIN 338 for greater rigidity Fully ground shank for precise clamping and runout 135° point angle optimised for stainless and hard steels Bright finished surface for easy chip evacuation Precision and Faster Cutting for Demanding Metals The HSS‑G material delivers significantly improved cutting performance: up to 40% faster drilling and about 50% less feed pressure compared with conventional HSS drills. This reduces operator effort and lowers tool wear when machining alloyed and unalloyed steel, cast steel, cast iron, sintered iron, non‑ferrous metals and hard plastics. The Type N normal spiral geometry ensures effective chip removal and consistent hole quality in metallic workpieces, so users achieve reproducible results even in tougher applications. Stable Short Design for Accurate Holes Designed according to DIN 338 as a short Twist Drill, the reduced overhang makes the tool far less prone to deflection and chatter. The shorter working length results in enhanced stability and improved concentricity, particularly when used in chucking Drilling Machines. The fully ground shank guarantees secure clamping and minimal run‑out, translating into straighter holes, longer tool life and fewer reworks. Application Focused for Metalworking Professionals This Twist Drill is intended primarily for metal drilling tasks and performs best in stationary and portable drilling setups. It is especially suitable for workshops, maintenance departments and production lines where consistent hole accuracy in steel and similar materials is required. The geometry and finish mean the drill is also relatively easy to resharpen, allowing economical use across many cycles. Tip Geometry and Practical Advantages The 135° point angle reduces walking on flat or curved surfaces and shortens the time to break through hard materials. A blunter tip like this distributes cutting forces over a larger area, which helps when centring on stainless steel or tempered components. For users unfamiliar with drill point geometry: a larger tip angle generally improves tip life and reduces the tendency to dig in aggressively, making it a pragmatic choice for robust metalworking. Strong recommendation: Choose MetavCUT quality for demanding metal drilling and contact METAV Werkzeuge's expert team for personalised advice — they provide comprehensive technical consultation and after‑sales support. For assistance email info@metav-werkzeuge.com or call +49 2822 7131930, WhatsApp +49 170 2837271 Designation: Twist Drill short, Type N, 3.5 mm, 135° Marke: MetavCUT SKU: 27035-FDA Diameter: 3.5 mm Overall length: 70 mm Spiral length: 39 mm Point angle: 135° Typ: Type N Material: HSS‑G Shank finish: Fully ground Surface finish: Bright finished Standard: DIN 338 Application: Drills for metal For drilling machine: Drilling Machine Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the Twist Drill used for? The Twist Drill by MetavCUT is primarily used for machining high‑strength materials and larger hole diameters; it is particularly suited to metalworking where durability and load tolerance are required. The short design and robust geometry make this Twist Drill easy to resharpen and able to withstand greater stresses during operation. Which three drill types exist? There are three main drill categories: metal drills, wood drills and stone/concrete drills. The MetavCUT Twist Drill belongs to the metal drill group and is optimised for cutting steels and similar materials. Is the MetavCUT Twist Drill suitable for stainless steel? Yes, the MetavCUT Twist Drill with a 135° point angle and HSS‑G composition is well suited for stainless steel and other harder alloys; the geometry reduces walking and improves tip life for cleaner, more consistent holes. Can the Twist Drill be resharpened? The MetavCUT Twist Drill can be resharpened; the HSS‑G material and the normal Type N spiral make it straightforward to regrind, extending service life and offering cost advantages for frequent users. Sind Sie sich nicht sicher, ob dieses Werkzeug Ihre Anforderungen erfüllt? Oder benötigen Sie ergänzende technische Daten? Kein Problem – wir stehen Ihnen gerne zur Verfügung. 📧 info@metav-werkzeuge.com ☎️ +49 2822 7131930 ✔️ WhatsApp +49 170 2837271
3.5mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Kombinieren Sie Stabilität und Präzision durch die kurze Ausführung und die geschliffene HSS-G-Geometrie für schnellere, saubere Metallbohrungen. Profitieren Sie von effizienter Zerspanung und geringer Anpresskraft bei anspruchsvollen Einsätzen; bei Bedarf steht Metav für Beratung und Lieferung bereit. Spiralbohrer von MetavCUT – HSS-G Kurzspiralbohrer (Typ N) Der Spiralbohrer von MetavCUT ist ein kurz ausgeführter, geschliffener HSS-G Metallbohrer für präzise Bohrungen in Stahl und Guss Kurz-Ausführung für höhere Stabilität Geschliffen für hohe Rundlaufgenauigkeit Spitzenwinkel 135° für harte Werkstoffe Geeignet für Handbohrmaschine und stationäre Maschinen DIN 338 Klassifizierung, Profi Line Ausführung Robuste Schneidgeometrie für harte Materialien Die geschliffene HSS-G-Geometrie sorgt für sehr scharfe Schneiden und eine hohe Rundlaufgenauigkeit, was besonders beim Bohren in legierten und unlegierten Stahl Vorteile bringt. Durch die kurze Ausführung reduziert sich die Auskraglänge, wodurch Vibrationen und Verbiegen minimiert werden; das Ergebnis sind präzise, gratarme Bohrlöcher und eine längere Standzeit der Schneide unter kontrollierten Kühlbedingungen. Effizienz und Bedienkomfort bei der Arbeit Dank der speziellen Geometrie kann bis zu 40 % schneller gebohrt werden und es ist bis zu 50 % weniger Anpresskraft erforderlich als bei herkömmlichen HSS-Bohrern. Das sorgt für geringere Belastung von Werkzeug und Maschine und ermöglicht ein gleichmäßigeres Vorschubverhalten bei Handgeführten Bohrmaschinen sowie stationären Säulenbohrmaschinen. Anwender profitieren von kürzeren Zykluszeiten und konsistenter Bohrqualität. Praktische Einsatzbereiche und Materialverträglichkeit Der Bohrer eignet sich gezielt für das Bohren in legierten und unlegierten Stahl, Gussstahl, Gusseisen, Sintereisen, Temperguss sowie Nichteisenmetalle und Hartkunststoffe. Die Auslegung als Typ N mit Normalspirale macht ihn zur verlässlichen Wahl für allgemeine Metallbearbeitung in Werkstatt, Montage und Instandsetzung, insbesondere wenn Stabilität und Präzision im Vordergrund stehen. Verarbeitung, Normen und Anwendungsratschläge Die Fertigung gemäß DIN 338 und die geschliffene Schaftausführung bieten Vorteile bei Rundlaufgenauigkeit und Formtreue. Für beste Ergebnisse empfiehlt sich Kühlung bei Dauerbelastung und das Anpunkten bei größeren Durchmessern; bei stationärem Einsatz reduziert die kürzere Auskraglänge das Risiko von Werkzeugbruch. Profi Line-Qualität von MetavCUT gewährleistet eine konsistente Fertigungsqualität. Empfehlung: Mit dem MetavCUT Profi Line HSS-G Kurzspiralbohrer gezielt Präzision und Effizienz erreichen; bei offenen Fragen Beratung per eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 nutzen Produktmerkmale Artikelnummer: 48035-FDA Marke: MetavCUT Bezeichnung: Spiralbohrer Modellserie: Profi Line Norm: DIN 338 Daten Durchmesser: 3,5 mm Gesamtlänge: 70 mm Spirallänge: 39 mm Spitzenwinkel: 135° Verpackungseinheit: 10 Besonderheiten Material: HSS-G Schaftausführung: geschliffen Ausführung: kurz Typ: Typ N Farbe: blank Einsatzgebiet: Bohrer für Metall Geeignet für: Handbohrmaschine FAQ Ist der Bohrer für Edelstahl geeignet? Der MetavCUT Spiralbohrer (Profi Line, SKU 48035-FDA) mit Spitzenwinkel 135° ist für härtere Werkstoffe wie Edelstahl besser geeignet als 118°-Spitzen; Kühlung und angepasste Schnittwerte werden empfohlen. Kann der Bohrer in einer Handbohrmaschine verwendet werden? Ja, die kurze Ausführung und die stabile Geometrie machen den Spiralbohrer von MetavCUT für den Einsatz mit Handbohrmaschinen geeignet, wobei ruhiger Anlauf und geeignete Kühlung die Standzeit verlängern. Wie unterscheidet sich die geschliffene Ausführung von gewalzten Bohrern? Geschliffene HSS-G-Bohrer bieten schärfere Kanten und höhere Rundlaufgenauigkeit, was besonders bei Metallbohrungen präzisere Ergebnisse liefert; sie sind jedoch empfindlicher gegen Kippbeanspruchung. Welche Vorteile bietet die kurze Ausführung konkret in der Praxis? Die kürzere Auskraglänge reduziert Vibrationen und Verformungen, führt zu weniger Werkzeugbruch bei anspruchsvollen Bohrungen und verbessert die Bohrgenauigkeit insbesondere in stationären Anwendungen. Wofür steht die Norm DIN 338 bei diesem Bohrer? DIN 338 klassifiziert kurze Spiralbohrer mit Zylinderschaft aus Schnellarbeitsstahl und definiert Fertigungsformen und Toleranzen, was für die Austauschbarkeit und Planbarkeit in der Werkstatt wichtig ist.
3.5mm HSS-G Twist Drill DIN 338 ,short, TIN-coated - MetavCUT
Twist Drill (Short) — HSS‑G, 3.5 mm, 118°, TIN‑coated, DIN 338 The Twist Drill short HSS‑G bit for Drilling Machine metalwork combines increased stability with extended tool life for precision workshop applications. Short design for high stability and precision TIN‑coated surface for reduced wear and longer life Fully ground shank for fast, low‑force drilling Conforms to DIN 338 for consistent dimensions and quality Greater Precision and Longer Tool Life for Metal Drilling Deriving real benefit from a compact geometry, the short Twist Drill reduces overhang and vibration to deliver more accurate holes in demanding tasks. The HSS‑G substrate provides high red hardness and wear resistance, while the TIN‑coated finish lowers friction and extends life under metalworking conditions. For users who require repeatable results, the combination of shortened flute length and the precise grind yields cleaner holes and fewer rejects. Ideal Choice When Stability Matters When the priority is rigidity rather than reach, the short format stands out: less cantilever means minimal deflection and better concentricity when drilling in steel or cast materials. This Twist Drill is particularly suited for workshop settings where a Drilling Machine or handheld drill is used with appropriate clamping. Use of coolant further reduces heat build‑up and preserves the coating, enabling consistent performance on alloyed and unalloyed steel. Simple Terms: What HSS‑G, TIN and Fully Ground Mean The designation HSS‑G indicates a ground high‑speed steel bit — grinding creates very sharp cutting edges and high run‑out accuracy. A TIN‑coated (Titanium Nitrid) surface acts as a solid lubricant layer that lowers friction and wear. A fully ground shank and flute geometry reduce cutting forces by up to 50% compared with conventional HSS bits, which means faster penetration and less operator effort. The 118° tip angle offers a compromise between centring ability and cutting strength, suitable for many metal applications. Applications and Who Benefits Most This short Twist Drill is designed for professional metalworkers, toolrooms and advanced hobbyists who require reliable holes in materials such as Tempered Steel, Gusseisen, Sintereisen, Neusilber, Kupfer, Bronze and Hartkunststoff. Its robustness and reduced tendency to chatter make it a sound choice for tasks that demand repeatability rather than deep through‑holes. For larger diameters or deeper drilling, consider longer geometries or stepped approaches. Strong recommendation: Choose the MetavCUT short TIN‑coated HSS‑G Twist Drill for precise metal drilling — for technical advice and tailored recommendations METAV Werkzeuge provides expert consultation via email info@metav-werkzeuge.com, phone +49 2822 7131930 and WhatsApp +49 170 2837271 Technical Data Designation: Twist Drill Brand: MetavCUT SKU: 28035-FDA Diameter: 3.5 mm Overall Length: 70 mm Spiral Length: 39 mm Tip Angle: 118° Execution: Short Shank Execution: Fully ground Coating/Colour: TIN‑coated Material: HSS‑G Application: Drills for Metal For Machine Type: Drilling Machine Standard: DIN 338 Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What are Twist Drills used for? The MetavCUT Twist Drill is primarily applied to machining high‑strength materials and larger hole diameters; its geometry is easy to resharpen and it withstands substantial loads while maintaining performance in metalworking tasks. Which three drill types exist? Commonly distinguished drill types are metal drills, wood drills and stone/concrete drills, with the MetavCUT Twist Drill belonging to the metal drill category and optimized for metal applications.
3.5mm HSS-G Twist Drill DIN 338 ,short, TIN-coated, Type N - MetavCUT
Twist Drill — Type N short, 3.5 mm, 135° point angle, TIN-coated, HSS‑G, DIN 338 The Twist Drill Type N short is a TIN‑coated HSS‑G metal drill designed for precise, stable drilling in hard materials with a 3.5 mm diameter and a 135° point angle. Short design for enhanced stability TIN-coated for extended tool life Fully ground shaft for high precision Optimised for hard metals such as steel Conforms to DIN 338 manufacturing standard Engineered for precision and longer tool life The short HSS‑G construction delivers high rigidity and precise hole quality even under tougher conditions. The TIN‑coating reduces friction and wear, which significantly extends the tool life when drilling metals. With a 3.5 mm diameter and a 135° point angle, the geometry is specifically suited to reduce walking on hard surfaces and to penetrate stainless and alloyed steels more effectively. This design helps achieve cleaner holes with less burr formation while maintaining long‑term performance. Best use cases in workshop and industry Choose this short Type N twist drill for demanding metalworking tasks on stationary drilling machines or robust hand drills where high stiffness and repeatable accuracy matter. The reduced overhang makes it ideal for short, deep plunge operations and for applications that require excellent concentricity. It is particularly recommended for alloyed and unalloyed steel, cast iron, copper, bronze and hard plastics where the combination of HSS‑G material and coating provides proven results. Faster drilling with lower effort and improved runout Thanks to the fully ground flute geometry, drilling can be up to 40% faster and require up to 50% less axial force compared with conventional untreated HSS tools in comparable conditions. The ground manufacture yields sharp cutting edges and excellent runout accuracy, which translates into superior surface finish and dimensional consistency. For workshop efficiency this means less rework and higher throughput on repetitive metal drilling tasks. Practical handling, cooling and resharpening guidance To maximise lifetime and safety, use appropriate coolant or cutting fluid; the TIN‑coating combined with cooling considerably reduces thermal load and wear. The 135° point angle shortens initial penetration time in harder materials, but the ground flute design can be more brittle than rolled variants—avoid excessive vibration and side loads. Re‑grinding is possible and practical: the tool geometry is straightforward to resharpen, restoring cutting edges and maintaining performance when required. Strong recommendation: For consistent professional results choose MetavCUT’s Twist Drill Type N short (HSS‑G, TIN‑coated) and contact METAV Werkzeuge for expert advice at info@metav-werkzeuge.com or by phone +49 2822 7131930 (WhatsApp +49 170 2837271). Technical Data Designation: Twist Drill Marke: MetavCUT Diameter: 3.5 mm Point Angle: 135° Type: Type N Execution: short Coating: TIN‑coated Shaft: fully ground Material: HSS‑G Spiral Length: 39 mm Overall Length: 70 mm Application: Drills for metal For Use With: Drilling machine / hand drill compatible Standard: DIN 338 Series: Standard Line Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the Twist Drill used for and which materials suit it best? The Twist Drill from MetavCUT, Type N, is used primarily for machining high‑strength materials and larger drill diameters; its short design and high‑quality HSS‑G construction make it suitable for alloyed and unalloyed steel, temper castings, cast iron, sintered iron, copper, bronze and hard plastics. This form is easy to resharpen and withstands higher loads. Which three drill types exist? Commonly distinguished drill types are: Metal drill (such as the MetavCUT Twist Drill), Wood drill, and Stone/Concrete drill. Why are twist drills resharpened? The Tip is reshaped to reduce the cross cutting edge at the point. Resharpening lowers friction forces so that less axial feed is required and improves centring of the drill in the workpiece, which enhances performance and hole quality. Can a Twist Drill be used to drill wood? A metal Twist Drill from MetavCUT can be used in wood, but guidance and finish are inferior compared with dedicated wood drills. Metal drills are easier to resharpen and have lower self‑feeding tendencies, yet they deliver less clean, well‑guided holes in timber.
3.5mm HSS-G Twist Drill DIN 338 ,short, TIN-coated, Type N - MetavCUT
Twist Drill — Type N short HSS‑G, 3.5 mm, 135° tip, TiN‑coated (DIN 338) by MetavCUT The Twist Drill Type N short is a precision HSS‑G drill designed for accurate metalworking on drilling machines and hand drills, offering a 135° tip and TiN coating for reduced wear. Short design for increased stability and precision TiN coating reduces friction and extends tool life HSS‑G ground geometry enables faster cutting 135° tip angle for improved centring in hard metals Fully ground shank for high concentricity and clean holes Stable, precise drilling even in demanding metals The short geometry of this HSS‑G drill reduces the unsupported length outside the chuck, which noticeably increases stability and lowers the risk of bending or vibration when working on tough materials. For a 3.5 mm diameter tool the reduced overhang results in more consistent hole position and less runout, so users achieve precise results with lower scrap rates. This makes the short design especially suitable for applications where tight tolerances matter. Longer tool life thanks to TiN coating and ground geometry A TiN‑coated surface combined with HSS‑G (ground high‑speed steel) reduces friction at the cutting edge and helps dissipate heat, which extends service life during continuous metal drilling. The ground flute geometry produces sharper cutting edges and a more efficient chip removal path, allowing up to 40% faster penetration in many ferrous materials while requiring significantly less feed force compared with conventional HSS drills. Broad metal compatibility and machine use Designed as a Type N normal‑spiral drill to DIN 338, this short twist drill is intended primarily for metal: alloyed and unalloyed steel, cast and sintered iron, bronze, copper and hard plastics. Its 135° tip angle improves entry and centring in harder workpieces such as stainless steel and temper castings. The tool is suitable for use in both stationary drilling machines and suitable hand drilling setups, provided correct clamping and coolant are used. Practical advantages for workshop productivity The fully ground shank and precise CNC grinding process yield high concentricity, which reduces vibration and produces cleaner holes with better surface finish. Because the short variant minimises deflection, higher feed rates can be applied safely on appropriate machines. For everyday workshop tasks that demand repeatable quality and minimal rework, this tool offers a measurable improvement in process reliability. Recommendation: For demanding metal drilling tasks, choose the MetavCUT short TiN‑coated Twist Drill for reliable precision and extended tool life — and if you are unsure whether this tool meets your requirements or need additional technical data, METAV Werkzeuge offers expert advice by email at info@metav-werkzeuge.com, by phone at +49 2822 7131930 or via WhatsApp at +49 170 2837271. Designation: Twist Drill (short, Type N) Brand: MetavCUT SKU: 41035-FDA Diameter: 3.5 mm Overall length: 70 mm Spiral length: 39 mm Tip angle: 135° Material: HSS‑G (ground high‑speed steel) Coating / Colour: TiN‑coated Shank: fully ground For machine: Drilling Machine / Hand Drill Application: Drills for metal Standard: DIN 338 Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What are Twist Drills used for and which materials suit the MetavCUT Type N short? The MetavCUT Twist Drill Type N short is primarily used for drilling high‑strength metals and larger diameters where a stable, precise cut is required; its short form and TiN coating make it suitable for alloyed and unalloyed steel, cast iron, copper, bronze and hard plastics while delivering long tool life under correct cooling. Which three drill types exist and how does the MetavCUT Twist Drill fit in? There are three common drill families: metal drills, wood drills and masonry/concrete drills; the MetavCUT Twist Drill belongs to the metal drill group (Type N normal spiral) and is optimised for metalworking applications.
3.5mm HSS-G Twist Drill DIN 338 - MetavCUT
Twist Drill — HSS‑G Metal Drill, 3.5 mm, 135° tip, DIN 338, Spezial Series (with multi‑bevel cutting edge) The Twist Drill is a precision metalworking drill bit designed for demanding drilling tasks in alloyed and unalloyed steels and other metals, offering fast, centered starts and compatibility with standard Drilling Machines. High drilling speed with reduced thrust 135° tip for harder materials and stainless steel HSS‑G construction for metalworking applications Multi‑bevel cutting edge for clean, burr‑free holes Conforms to DIN 338 short spiral drill standard High performance for fast, efficient metalworking The HSS‑G composition and the specially ground geometry deliver notably faster drilling in a wide range of metals. Thanks to the multi‑bevel cutting edge, the tool achieves up to 40% faster progress while requiring up to 50% less feed force compared with conventional HSS bits. This efficiency reduces operator effort and machine load when working in steel, cast materials, non‑ferrous metals and technical plastics. For workshop environments where throughput and repeatable results matter, this cutting tool is engineered to increase productivity. Cleaner starts and better hole quality for tough materials A 135° tip angle is optimised for harder workpiece materials and helps prevent wandering on entry, producing clean, burr‑reduced hole edges. The reduced cross‑cut at the point lowers friction and the need for high feed forces, which improves centring and surface finish. For users who require precise hole geometry in stainless or tempered steels, this geometry reduces rework and downstream finishing, giving consistently better end results. Built for professional machines and demanding applications Designed according to DIN 338 for short spiral drills with cylindrical shank, this tool is intended primarily for metalworking on rotating stationary or mobile Drilling Machines. The Spezial series execution targets workshops and mechanical engineering settings where repeatability and tool life are required. If uncertainty exists about machine compatibility or the optimal drill for a specific alloy, METAV Werkzeuge provides expert technical support and application advice to ensure the correct tool choice. Standards, durability and practical use explained The designation HSS‑G denotes a high‑speed steel grade suited to metal drilling; it balances wear resistance and grindability for professional use. The DIN 338 reference identifies this as a short spiral drill with cylindrical shank and clarifies manufacturing and dimensional expectations. The included shaft execution — with multi‑bevel cutting edge, without triangular shank — ensures compatibility with standard chucks and quick change holders while maintaining precise cutting action. For users less familiar with drill geometry, the 135° tip simply means better performance and less walking in harder materials. We recommend the MetavCUT Twist Drill for precision metalworking where speed and clean hole quality are decisive — for application advice or technical questions contact METAV Werkzeuge at info@metav-werkzeuge.com, by phone +49 2822 7131930 or WhatsApp +49 170 2837271 Designation: Twist Drill Marke: MetavCUT SKU: 55035-FDA Diameter: 3.5 mm Tip angle: 135° Material: HSS‑G Model series: Spezial Shank execution: with multi‑bevel cutting edge, without triangular shank Spiral length: 39 mm Overall length: 70 mm Standard: DIN 338 Application: Drills for metal / suitable for Drilling Machine use Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is a Twist Drill used for and which materials suit the MetavCUT Twist Drill? The MetavCUT Twist Drill is primarily used for metalworking and is suitable for alloyed and unalloyed steels, cast materials, non‑ferrous metals and hard plastics; its geometry and HSS‑G construction make it effective for demanding drilling tasks in workshop and industrial settings. For what is a spiral drill (Twist Drill) typically applied? A Twist Drill is mainly applied to the machining of high‑strength materials and larger drill diameters; it is easy to regrind and withstands higher loads, which makes it especially useful for drilling steels and other demanding workpiece materials. Which three drill types are there? Common categories are metal drills, wood drills and masonry/concrete drills; the MetavCUT Twist Drill belongs to the metal drill category and is optimised for metalworking performance.
3.5mm HSS-G Twist Drill DIN 340 ,long, bright finished - MetavCUT
Twist Drill (Spiralbohrer) – HSS‑G Twist Drill, 3.5 mm, 135°, long, bright finished, fully ground, DIN 340 by MetavCUT The Twist Drill is a long HSS‑G metal drilling tool designed for deep and hard‑material drilling with a 3.5 mm Diameter and a 135° Point Angle, suitable for use with a Drilling Machine. CNC‑ground HSS for faster, cleaner metal drilling Long DIN 340 design for deep or hard‑to‑reach holes 135° Point Angle optimised for harder materials Fully ground Shank for high concentricity and precision Bright finished surface for improved rust resistance Precision Grinding for Faster, Cleaner Holes High‑speed‑steel HSS‑G and CNC Grinding deliver clearly measurable benefits: the Ground Geometry produces very sharp Cutting Edges and excellent Roundness, which enables up to 40% faster drilling and requires significantly less Feed Force than conventional HSS drills. This means less heat buildup and fewer burrs when working in Alloyed and Unalloyed Steel, Cast Steel and Non‑Ferrous Metals. For users with limited technical background: HSS‑G stands for a Ground High‑Speed Steel variant offering superior Edge Sharpness and Hole Quality compared with rolled drills. Deep Drilling Capability with Reduced Friction The Long Execution in accordance with DIN 340 provides extended Overall Length and Spiral Length to reach deeper Bore Positions and recessed Holes. The 135° Point Angle reduces initial Cutting Forces and improves Centring in harder Workpieces such as Stainless Steel, while the Bright Finished surface helps reduce Friction at entry. Because Ground drills can be more brittle than rolled types, stationary use or steady Cooling is recommended when drilling deep or at high Speeds to avoid chipping. Designed for Professional Metalworking and Maintenance Tasks Target Groups include Workshops, Maintenance Teams and Precision Mechanics who require repeatable, high‑quality Holes in Metal. The Fully Ground Shank supports low Runout in hand‑held and bench Drilling Machines, delivering uniform Hole Diameter and longer Tool Life under correct operating conditions. For best results, use appropriate Cutting Fluid, moderate Speed and steady Feed. METAVCUT’s Standard Line aims to combine Reliability and economical Performance for everyday industrial demands. MetavCUT’s HSS‑G Twist Drill is recommended for demanding metal drilling tasks; for personalised technical advice or application support contact METAV Werkzeuge: info@metav-werkzeuge.com • Tel: +49 2822 7131930 • WhatsApp: +49 170 2837271 Designation: Twist Drill (Spiralbohrer) Brand: MetavCUT SKU: 53035-FDA Diameter: 3.5 mm Point Angle: 135° Execution: long (DIN 340 long execution for deeper holes) Overall Length: 112 mm Spiral Length: 73 mm Colour / Finish: Bright finished Shank Execution: Fully ground (geschliffen) Material: HSS‑G Application: Drills for Metal / Bohrer für Metall Model Series: Standard Line For Use With: Drilling Machine (Handbohrmaschine) Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is a Twist Drill used for and which materials is it suitable for? The Twist Drill by MetavCUT is primarily used for machining high‑strength materials and larger diameters; it is especially suitable for alloyed and unalloyed Steel, Cast Steel, Sintered Iron and Hard Plastics. Its Ground Geometry is easy to resharpen and withstands higher Loads while delivering precise Holes. Which three main drill types exist? The three main Drill Types are Metal Drills, Wood Drills and Stone/Concrete Drills; MetavCUT’s Twist Drill belongs to the Metal Drill category and is optimised for metalworking conditions.
3.6mm HSS Twist Drill DIN 338 ,short, roll forged, black, Type N - MetavCUT
Twist Drill — Type N short HSS, 3.6 mm, 118°, black, DIN 338 A compact Twist Drill in Type N design for precise metal drilling with Hand and Drilling Machines. Short Type N HSS for stable metal drilling 3.6 mm Diameter for precise holemaking 118° Tip Angle for quick centring Conforms to DIN 338 for short twist drills Black finish for easy identification Precision and stability for metalworking results The short HSS construction provides higher rigidity and reduces deflection during machining, so users benefit from consistent hole geometry and lower breakage risk. With a 3.6 mm Diameter and a Total Length of 70 mm, the flute Length of 39 mm keeps the working length compact, improving run-out behaviour when used in Hand or Drilling Machines. For workshops that require repeatable, accurate holes in alloyed and unalloyed steel, this geometry supports reliable, repeatable performance. Designed for reliable centring and fast penetration A 118° Tip Angle balances centring and cutting speed: it enables easier initial penetration on slightly curved or coated surfaces while maintaining efficient chip removal. The Type N normal spiral profile is optimised for metalworking, which means that this short Twist Drill is particularly suited to jobs where guidance and straightness matter most. For less experienced users, the combination of tip geometry and short overhang reduces the need for complex fixturing. Durable material, easy to re-sharpen and maintain Manufactured from High Speed Steel (HSS), this short Twist Drill delivers elasticity under load and can be re-sharpened when wear occurs, extending useful life. The HSS composition lowers the risk of brittle fracture for Diameters under 6 mm, making it a pragmatic choice for general metal drilling. Conformity with DIN 338 ensures standardised dimensions and interchangeability with common chucks and holders used in many metalworking environments. Typical applications and the right users for the tool This Twist Drill is intended for Drilling for metal tasks such as steel, cast iron, non‑ferrous metals and certain plastics; it is a practical choice for professional Workshops, maintenance teams and skilled hobbyists who need robust, repeatable performance. The short execution supports operations on bench drills and portable drills where stability is a priority. For projects requiring deeper or specialised holes other geometries or lengths should be considered. Why choose this MetavCUT short twist drill Choosing this MetavCUT short Twist Drill Type N means opting for a tool that emphasises stability, serviceability, and standard compliance. The compact design reduces vibration and improves surface finish in typical metalworking contexts. If there is uncertainty whether this Twist Drill matches a specific machine or material, METAV Werkzeuge offers expert consultation to help select the correct geometry and material treatment for the task. Strong recommendation: Choose the MetavCUT short HSS Twist Drill Type N for precise metal holes — for technical advice or assistance contact METAV Werkzeuge: 📧 info@metav-werkzeuge.com ☎️ +49 2822 7131930 ✔️ WhatsApp +49 170 2837271 Technical specifications Designation: Twist Drill Brand: MetavCUT SKU: 40036-FDA Type: Type N Material: HSS (High Speed Steel) Diameter: 3.6 mm Tip angle: 118° Execution: short Flute/Spiral length: 39 mm Total length: 70 mm Colour: black Suitable for: Drilling Machine / Hand Drilling Machine Application: Drills for metal Standard: DIN 338 Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the MetavCUT Twist Drill Type N mainly used for? The MetavCUT Twist Drill Type N is primarily used for machining high-strength materials and larger drill diameters; its form is easy to re-sharpen and withstands significant loads, which makes it suitable for demanding metalworking tasks and ensures reliable performance in many workshop applications. Which three drill categories exist? Drill types are commonly divided into metal drills, wood drills, and masonry/concrete drills; the MetavCUT Twist Drill Type N belongs to the metal drill group and is optimised for steel, cast iron and non‑ferrous metals. Why are Twist Drills sharpened at the tip? The tip sharpening reduces the cross‑cut at the drills' point, which lowers friction and therefore requires less feed force; for the MetavCUT Twist Drill this sharpening also improves centring and helps achieve a cleaner hole entry with reduced walking. Can the MetavCUT Twist Drill be used for drilling wood? A metal drill such as the MetavCUT Twist Drill can be used in wood, but guidance is inferior and hole finish is less clean compared with purpose‑made wood drills; however, metal drills are easier to re-sharpen and have less self‑feed tendency.
3.6mm HSS-E Twist Drill DIN 338 ,short, 5% cobalt-alloyed, Type N - MetavCUT
Twist Drill short HSS‑E, 3.6 mm, 135°, Type N, 5% cobalt-alloyed, fully ground, DIN 338 The Twist Drill short (Type N) is a HSS‑E metal drill designed for precise, stable drilling in hard materials using a Drilling Machine. Short design for high stability 135° point angle for hard metals 5% cobalt-alloyed HSS-E material Fully ground shank for precision Complies with DIN 338 standard Greater Precision through a Short, Rigid Design A shorter cutting length reduces overhang and bending, delivering higher stability and more accurate hole positioning. The short configuration of this Twist Drill is especially effective when tight tolerances are required, since the reduced length minimizes chatter and deflection. For operators aiming to improve repeatability on metal components, this design leads directly to fewer rejects and less rework. Heat-resistant Material and Sharp, Clean Cutting Built from HSS‑E with 5% cobalt-alloyed composition, this Twist Drill offers enhanced hot hardness and wear resistance during interrupted cuts or higher cutting speeds. The fully ground geometry creates very sharp cutting edges and excellent runout accuracy, producing cleaner holes in ferrous and non-ferrous metals. Users should be aware that ground variants can be less ductile than rolled types and benefit from appropriate coolant to extend tool life. Optimised for Metalworking and Hard Materials With a 135° point angle and classic Type N spiral, the tool penetrates tough materials more effectively and reduces walking on the surface. This geometry is tailored to workpieces such as alloyed and unalloyed steel, cast iron, non‑ferrous metals and certain engineering plastics. The 3.6 mm diameter and corresponding flute length support applications where compact, precise holes are required on stationary or mobile drilling equipment. Who benefits and how to integrate it into the workflow This Twist Drill from MetavCUT is aimed at machinists, toolroom staff and maintenance professionals who need a reliable, precise metal drill for production and repair tasks. Use with steady clamping and recommended cooling to avoid premature wear. Compliance with DIN 338 ensures standardized dimensions and interchangeability for workshop setups that require consistent tool geometry. Choose MetavCUT's Twist Drill short Type N for demanding metal drilling tasks — for detailed technical advice or help selecting the right drill please contact METAV Werkzeuge: info@metav-werkzeuge.com • Tel +49 2822 7131930 • WhatsApp +49 170 2837271 Twist Drill Marke: MetavCUT SKU: 47036-FDA Type: Type N Diameter: 3.6 mm Point angle: 135° Overall length: 70 mm Spiral length: 39 mm Execution: short Shaft finish: fully ground Material: HSS-E Colour: 5% cobalt-alloyed For: Drilling Machine Application: Drills for metal Norm: DIN 338 Model series: Standard Line Bezeichnung (English): Twist Drill Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the Twist Drill short Type N best used for? The MetavCUT Twist Drill short Type N is best used for precision drilling in metal, particularly alloyed and unalloyed steel, cast iron and non‑ferrous metals where a short, rigid drill reduces deflection and improves hole quality. Is coolant recommended when using the Twist Drill short from MetavCUT? Yes, using coolant is recommended with the MetavCUT Twist Drill short to lower cutting temperatures, extend tool life and achieve cleaner holes, especially when drilling harder materials at higher speeds. What are Twist Drills used for? They are primarily applied to the machining of high‑strength materials and larger bore diameters; the Twist Drill design is relatively easy to resharpen and withstands higher loads. Which 3 drill types exist? The three main drill categories are metal drills, wood drills and stone/concrete drills. Why are Twist Drills point‑sharpened? Point sharpening reduces the cross‑cut at the tip, significantly lowering friction and required feed forces while improving the drill’s centring in the workpiece. Can metal drills be used for wood drilling? Metal drills can be used in wood, but they typically provide poorer guidance and a less clean finish compared with wood drills; they are easier to resharpen and have less self‑feed tendency. For which drilling depths is the Twist Drill most used? A through-hole in solid material is commonly produced with a Twist Drill; this tool is most frequently used for diameters up to 20 mm and drilling depths up to 100 mm. What is better, HSS or HSSE? The common belief that HSSE is always superior to HSS is incorrect; selection should consider actual working conditions to determine whether the higher cost of HSSE is justified.
3.6mm HSS-G Body Drill ,double sided, bright finished - MetavCUT
Kompakter Karosseriebohrer mit HSS-G und 135° Spitzenwinkel für präzise Blech- und Stahlbohrungen; die doppelseitige Ausführung reduziert Ausfallzeiten, und die geschliffene Schaftgeometrie sorgt für exakten Rundlauf. Nutzen Sie die Kombination aus schneller Schneidleistung und robuster Bauweise für effiziente Werkstattprozesse. Bestellen Sie das Werkzeug direkt über Metav Werkzeuge oder fragen Sie die Beratung bei Bedarf an. Karosseriebohrer von MetavCUT Der Karosseriebohrer ist ein doppelseitiger HSS-G Bohrer für präzise Metallbearbeitung in Werkstatt und Karosserie, geeignet für Handbohrmaschine und stationäre Einsätze. Karosseriebohrer »58036-FDA« von MetavCUT Geschliffenes HSS-G für saubere Metallbohrungen Doppelseitig: zwei Spitzen in einem Bohrer 3,6 mm Durchmesser, kurze Bauform für Blecharbeiten Für Handbohrmaschine und Werkstattmaschinen geeignet Schnelle, präzise Bohrungen in harten Werkstoffen Dank HSS-G (geschliffen) ergibt sich eine deutlich schärfere Schneidkante, die saubere Bohrbilder in legierten und unlegierten Stahl, Gussstahl sowie in Nichteisenmetallen ermöglicht. Der 135° Spitzenwinkel reduziert das Anbohren und verteilt die Schnittkräfte, sodass die Bohrung schneller entsteht und weniger Anpresskraft erforderlich ist. Diese Eigenschaft führt zu messbarer Effizienzsteigerung bei wiederkehrenden Bohraufgaben, ohne die Standzeit unnötig zu beeinträchtigen. Doppelseitige Konstruktion reduziert Werkzeugwechsel Die doppelseitige Ausführung funktioniert wie zwei Bohrer in einem: Wenn eine Spitze stumpf geworden ist, kann der Bohrer gewendet und die zweite Spitze verwendet werden. Diese Lösung ist besonders praktisch im Karosseriebau und bei Dünnblecharbeiten, weil sie Rüstzeiten reduziert und die Kosten pro Bohrung senkt. Durch die kurze, stabile Bauform eignet sich das Werkzeug besonders für Nietlöcher und präzise Blechverbindungen. Kompatibilität, Handhabung und Anwendungsbedingungen Die geschliffene Schaftgeometrie sorgt für Rundlaufgenauigkeit und sichere Kraftübertragung, sowohl bei Handgeführten Bohrmaschinen als auch bei stationären Säulenbohrern. Mit einer Spirallänge von 13 mm und einer Gesamtlänge von 55 mm eignet sich der Bohrer für flache bis mitteltiefe Bohrungen. Wegen der höheren Sprödigkeit von geschliffenen HSS-Werkzeugen empfiehlt sich der Einsatz von Kühlschmierstoff und moderater Drehzahl, um Bruchrisiken zu minimieren und die Standzeit zu optimieren. Für wen dieses Werkzeug entwickelt wurde Dieses Werkzeug richtet sich an Fachbetriebe im Karosseriebau, Fahrzeuginstandsetzung und allgemeine Werkstätten sowie an anspruchsvolle Heimwerker, die präzise Metallarbeiten ausführen. Durch die Kombination aus robustem Material und durchdachter Bauart profitieren Anwender von reduzierten Stillstandzeiten und konstanter Bohrqualität, besonders bei seriennahen Reparatur- und Montagearbeiten. Empfehlung: MetavCUT HSS-G Karosseriebohrer für präzise Blecharbeiten direkt bei Metav anfragen; technische Beratung und Bestellhilfe per E‑Mail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 verfügbar. Produktmerkmale Artikelnummer: 58036-FDA Marke: MetavCUT Bezeichnung: Karosseriebohrer Serie: Standard Line Ausführung: doppelseitig Material: HSS-G Farbe: blank Daten Durchmesser: 3,6 mm Gesamtlänge: 55 mm Spirallänge: 13 mm Spitzenwinkel: 135° Verpackungseinheit: 10 Besonderheiten Material: HSS-G (G = geschliffen, für scharfe Kanten) Schaftmaterial/-ausführung: geschliffen Für Bohrmaschine: Handbohrmaschine Ausführung: doppelseitig Einsatzgebiet: Karosserie und Dünnblech FAQ Ist der Bohrer für Edelstahl geeignet? Der MetavCUT Karosseriebohrer aus HSS-G mit 135° Spitzenwinkel ist für viele legierte Stähle geeignet; bei hochlegierten oder besonders zähen Edelstählen empfiehlt sich eine spezielle Schneidstoffwahl oder reduzierte Schnittgeschwindigkeit. Welche Maschinen sind kompatibel mit diesem Bohrer? Der Karosseriebohrer wurde für Handbohrmaschine und stationäre Werkstattmaschinen konstruiert; bei Handgebrauch empfiehlt sich kontrollierte Drehzahl und Kühlschmierstoff zur Minimierung von Wärme- und Bruchschäden. Wie tief kann mit dem Bohrer sicher gebohrt werden? Mit einer Spirallänge von 13 mm und einer Gesamtlänge von 55 mm sind flache bis mitteltiefe Bohrungen vorgesehen; für starke Tiefen oder Vollmaterial sollte stufenweise vorgebohrt werden. Wie verhält sich die doppelseitige Ausführung in der Praxis? Die doppelseitige Bauform ermöglicht zwei Einsatzseiten pro Werkzeug, wodurch Rüstzeiten reduziert werden; der MetavCUT Karosseriebohrer ist dadurch wirtschaftlich bei wiederkehrenden Blecharbeiten. Gibt es Besonderheiten bei der Anwendung von HSS-G? Geschliffene HSS-G Bohrer liefern sehr scharfe Kanten und präzise Bohrbilder, können aber spröder sein; daher empfiehlt MetavCUT den Einsatz mit Kühlung und kontrollierter Vorschubrate, speziell bei empfindlichen Einsätzen.
3.6mm HSS-G Twist Drill DIN 1897 ,extra short, bright finished, Type N - MetavCUT
Die Kombination aus Extra Kurzer Bauform, HSS-G-Schneide und Zylinderschaft sorgt für stabile, schnelle und vielseitige Metallbohrungen; profitieren Sie von geringerer Bruchneigung und erhöhter Bohrgeschwindigkeit und bestellen Sie den Spiralbohrer direkt über Metav oder kontaktieren Sie unsere Beratung bei Fragen. Spiralbohrer 3,6 mm von MetavCUT (Typ N) Spiralbohrer 3,6 mm für präzise Metallbohrungen in dünnen Blechen und Profilen, extra kurz und robust für Hand- und Winkelbohrmaschinen. Extra kurze Bauform für mehr Stabilität HSS-G: schnelleres Bohren in Stahl und Guss Spitzenwinkel 135° für harte Werkstoffe Zylinderschaft, passend für Dreibackenfutter DIN 1897 Standard, Typ N Standardspirale Mehr Stabilität bei beengten Platzverhältnissen und dünnen Werkstücken Die Extra Kurze Ausführung reduziert die Hebelwirkung und minimiert die Bruchneigung, was insbesondere beim Bohren in dünnen Blechen oder engen Bohrpositionen entscheidend ist. Durch die kürzere Spirallänge verbessert sich die Rundlaufgenauigkeit, sodass weniger Nacharbeit erforderlich wird. Anwender profitieren von einer bis zu 40 % schnelleren Bohrleistung und einem um 50 % reduzierten Anpressdruck gegenüber herkömmlichen HSS-Varianten, was die Bedienung mit Handbohrmaschinen deutlich erleichtert. Materialqualität und Schneidwinkel für harte Metalle Der Einsatz von HSS-G sorgt für hohe Verschleißfestigkeit und thermische Belastbarkeit beim Bohren in legierten und unlegierten Stählen, Guss und Hartkunststoffen. Der Spitzenwinkel 135° reduziert das Ausbrechen beim Anbohren harter Werkstoffe und verkürzt die Anbohrzeit, weil die Schneide flacher auftrifft. Als Typ N mit Normalspirale eignet sich der Bohrer besonders für metallische Werkstoffe, wobei die Schneidengeometrie ein ausgewogenes Vorschubverhalten und zuverlässige Spanabfuhr gewährleistet. Kompatibilität mit Werkstatt- und Handmaschinen für den Alltag Die Zylinderschaft macht den Bohrer universell einsetzbar in gängigen Dreibackenfuttern von Handbohrmaschinen und Winkelschleifern mit Bohrfutter. Für den Durchmesser im Standard-Bereich (2,0 mm–13,0 mm) ist dieses Werkzeug ideal geeignet für Werkstattarbeiten, Montage und DIY‑Projekte; bei höherer Präzision empfiehlt sich vorheriges Anpunkten mit einem Zentrierbohrer. Die extra kurze Ausführung ist speziell dann von Vorteil, wenn wenig Platz für Ausklinkungen oder Innenbearbeitung vorhanden ist. Praktische Anwendungstipps für saubere Bohrresultate Vor dem Bohren sollte die Bohrstelle entgratet und, falls möglich, mit Schneidöl leicht geschmiert werden, um Standzeit und Oberflächenqualität zu verbessern. Für saubere Passungen gilt: Anbohren über ein Zentrierloch erhöht die Präzision; bei tiefen Löchern ist Mehrstufiges Aufbohren ratsam, um die Querschneide zu entlasten. Beachten Sie die maximale effektive Bohrtiefe im Verhältnis zum Durchmesser; bei diesem Durchmesser reichen gewöhnlich direkte Bohrungen aus, solange die Maschine stabil gespannt ist. Nutzen Sie die hohe Stabilität und Schnittgeschwindigkeit des MetavCUT Spiralbohrers (SKU 56036-FDA) für exaktere Metallbohrungen und bestellen Sie direkt bei Metav – bei technischen Fragen: info@metav-werkzeuge.com Produktmerkmale Artikelnummer: 56036-FDA Marke: MetavCUT Bezeichnung: Spiralbohrer Serie: Standard Line Typ: Typ N Norm: DIN 1897 Material: HSS-G Farbe: blank Schaftausführung: Zylinder Gesamtlänge: 52 mm Spirallänge: 20 mm Spitzenwinkel: 135° Ausführung: extra kurz Anwendung: Bohrer für Metall Verpackungseinheit: 10 Daten Durchmesser: 3,6 mm Gesamtlänge: 52 mm Spirallänge: 20 mm Spitzenwinkel: 135° Verpackungseinheit: 10 Besonderheiten HSS-G: Hochleistungs-Schnellstahl, verschleißfest DIN 1897: Standard für Spiralbohrer, Maß- und Formtreue Zylinder: Rundschaft, passend für Dreibackenfutter Typ N: Normalspirale, geeignet für Metall und Stahl Extra kurz: Kürzere Gesamtlänge und Arbeitslänge für höhere Stabilität Anwendung: geeignet für Handbohrmaschine und Winkelbohrmaschinen FAQ Wie geeignet ist der Bohrer für Edelstahl und gehärtete Stähle? Der MetavCUT Spiralbohrer (Typ N, SKU 56036-FDA) mit Spitzenwinkel 135° ist für härtere Werkstoffe deutlich besser geeignet als spitzere Bohrer; bei sehr gehärteten Stählen empfiehlt sich jedoch spezialisierter Bohrerwerkstoff. Kann der Bohrer in einer Handbohrmaschine verwendet werden? Ja, die Zylinderschaft macht den Spiralbohrer kompatibel mit gängigen Dreibackenfuttern von Handbohrmaschinen; bei hohem Drehmoment ist auf sicheren Sitz im Bohrfutter zu achten. Für welche Werkstoffe ist dieser Bohrer am besten geeignet? Der HSS-G Spiralbohrer ist optimiert für legierten und unlegierten Stahl, Gussstahl, Gusseisen, Sintereisen, Temperguss sowie Nichteisenmetalle und Hartkunststoffe. Wie verhindert man Bruch bei der Nutzung des extra kurzen Bohrers? Kurze Bohrerlängen reduzieren die Bruchgefahr; zusätzlich helfen korrekt gewählter Vorschub, moderate Drehzahlen und Einsatz von Schneidöl, die Standzeit zu erhöhen. Worin besteht der Vorteil der extra kurzen Ausführung gegenüber Standardlängen? Die Extra Kurze Bauform erhöht die Verdrehungsfestigkeit, verringert das Risiko des Verkippens und ermöglicht präzise Bohrungen in engen Bauteilen.
3.6mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
MetavCUT Twist Drill (Spiralbohrer) — Type N, 3.6 mm, 135°, Short, Bright Finished, HSS‑G, DIN 338 The MetavCUT Twist Drill (Spiralbohrer) is a short, fully ground Type N drill bit designed for precision metalworking and stationary or portable drilling machines. Short, short design for higher stability Fully ground HSS‑G for clean, precise holes 135° tip optimized for hard materials Conforms to DIN 338 for short twist drills Bright finished shank for secure clamping Durable HSS‑G construction for metalworking efficiency The HSS‑G composition of this short twist drill combines high hardness with a ground geometry that produces clean, accurate holes in a range of metals. Because the flutes and cutting edges are produced by CNC grinding rather than rolling, the result is a sharp cutting edge and excellent runout accuracy, which reduces the need for rework. For operations in alloyed and unalloyed steel, cast steels and non‑ferrous metals, this material and finish deliver reliable performance and predictable tool life. Short length for greater rigidity and precision A reduced overall length and short flute length lower the unsupported overhang, increasing rigidity and reducing vibration during drilling. This design characteristic leads to improved hole quality and less tool deflection when machining harder materials. In practice, shorter drill geometry is particularly advantageous when using the drill in demanding machining tasks or in setups where concentricity and surface finish are critical. 135° tip and Type N spiral for hard materials The 135° tip angle of this twist drill reduces the initial tendency to wander and distributes cutting forces over a larger area, which is beneficial when penetrating tougher materials such as stainless steel. As a Type N (normal spiral) geometry, the flute pitch and helix are optimised for metalworking, offering a balance between chip evacuation and cutting stability. For users unfamiliar with tip geometry: a larger tip angle shortens the entry time and improves centring on hard workpieces. Fully ground shaft and bright finish for secure clamping The fully ground shank ensures consistent diameter and concentricity, making the tool easier to clamp securely in standard chucks and toolholders. The bright finished surface facilitates smooth insertion and removal while minimising corrosion during storage. Together these features enhance setup reliability and reduce downtime caused by tool slippage or misalignment. Applications and recommended use This short twist drill is intended primarily for metal drilling on both stationary and portable drilling machines. Typical applications include holes in alloyed and unalloyed steels, cast materials, sintered and tempered irons, non‑ferrous metals and hard plastics. Due to its ground geometry and material properties, the drill is best used with adequate coolant and in setups where rigidity can be maintained to avoid premature breakage. For technical advice or to verify if this MetavCUT Twist Drill matches specific machining conditions, METAV Werkzeuge offers expert consultation — contact info@metav-werkzeuge.com or call +49 2822 7131930, WhatsApp +49 170 2837271 Designation: Twist Drill (Spiralbohrer) Marke: MetavCUT SKU: 45036-FDA Type: Type N Diameter: 3.6 mm Tip angle: 135° Execution: Short Flute length: 39 mm Overall length: 70 mm Shank execution: Fully ground Material: HSS‑G Finish/Colour: Bright finished For drill machine: Drilling Machine (Hand Drill) Application: Drills for metal Standard/Norm: DIN 338 Model series: Standard Line Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the primary use of the MetavCUT Twist Drill (Spiralbohrer) and where is it best applied? The MetavCUT Twist Drill (Spiralbohrer), a Type N short HSS‑G drill, is mainly applied for machining high‑strength materials and larger diameters in metalworking; its ground geometry makes it especially suitable for precise holes in alloyed and unalloyed steel, cast steel and other hard materials. Which three drill types exist and how does the MetavCUT Twist Drill relate to them? There are three main drill categories: metal drills, wood drills and masonry/concrete drills. The MetavCUT Twist Drill belongs to the metal drill category and is optimised for metalworking rather than wood or stone applications.
3.6mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Twist Drill (Type N) – 3.6 mm, 135°, HSS‑G, short, bright finished The Twist Drill (Type N) is a short, fully ground HSS‑G metal drill designed for drilling machines and precision work in hard materials Short design for higher stability and precision 3.6 mm Diameter for precise metal drilling 135° Tip angle for hard materials like stainless steel HSS‑G Fully ground for sharpness and accuracy Suitable for Drilling Machines and demanding metalwork Precision and performance for demanding metalwork Der kurze Twist Drill überzeugt durch seine kompakte Bauweise, die eine deutlich höhere Stability und geringere Neigung zum Verbiegen ermöglicht. Die geschliffene HSS‑G-Geometrie sorgt für scharfe Schneidenflanken und eine gleichmässige Schnittführung, was in der Praxis zu saubereren Bohrlöchern führt. Dank der kürzeren Spiral‑Auskragung ist die Bohrung stabiler, Materialausbrüche werden minimiert und die Effizienz beim Bohren in legierten und unlegierten Stählen erhöht. Optimised for hard materials and machine use Die Kombination aus 135° Tip angle und der Norm DIN 338 macht diesen Bohrer zur idealen Wahl für härtere Werkstoffe wie Edelstahl, Gussstahl und Hartkunststoffe. Als Typ N (Normalspirale) ist der Bohrer speziell für Metallbohrungen konzipiert und arbeitet zuverlässig in stationären oder mobilen Bohrmaschinen. Anwender profitieren von einer schnelleren Vorschubaufnahme und einer besseren Zentrierung beim Anbohren, insbesondere bei präzisen Metallbearbeitungen. Target groups and safe handling tips Fertigungstechniker, Maschinenbediener und anspruchsvolle Handwerker profitieren gleichermaßen von der Profi Line Ausführung. Für ein langlebiges Ergebnis empfiehlt sich beim Einsatz Kühlung und eine geeignete Schnittgeschwindigkeit; geschliffene HSS‑Bohrer können bei falscher Handhabung spröde reagieren, daher gehört eine ruhige Maschinenführung zur sicheren Anwendung. Bei Unsicherheiten zu Einsatzparametern oder kompatiblen Maschinen steht METAV Werkzeuge mit kompetenter Beratung zur Seite. Strong recommendation: Choose the MetavCUT Profi Line short Twist Drill for precise metal drilling — for expert advice or technical queries contact METAV Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930, WhatsApp +49 170 2837271 Technical Details Designation: Twist Drill Brand: MetavCUT SKU: 48036-FDA Type: Type N Diameter: 3.6 mm Tip Angle: 135° Material: HSS‑G Overall Length: 70 mm Spiral Length: 39 mm Shank Execution: Fully ground Execution: Short Finish Colour: Bright finished Intended Use: Drills for metal / Drilling Machine Series: Profi Line Norm: DIN 338 Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is a Twist Drill mainly used for and what makes the MetavCUT Type N suitable? A Twist Drill from MetavCUT, Type N, is primarily applied to the machining of high‑strength materials and larger drill diameters; the short, fully ground HSS‑G design is easy to resharpen and withstands higher loads, making it particularly suited for reliable metalworking tasks. Which three drill types exist? The three main drill types are metal drills, wood drills and stone/concrete drills, with the MetavCUT Twist Drill belonging to the metal drill category and optimised for steel and similar materials.
3.75mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Twist Drill (Spiralbohrer) — Short HSS-G Type N, 3.75 mm, 135°, Bright Finished, Fully Ground, DIN 338 — MetavCUT A Twist Drill (Spiralbohrer) Type N designed for Drilling Machine use, offering a short, rigid HSS-G construction for precise metalworking in hard materials. Short design for improved rigidity and accuracy HSS-G ground geometry for clean, precise holes 135° point angle suited to hard metals and stainless steel Fully ground shank for excellent runout accuracy Conforms to DIN 338 for short twist drills Maximum Precision from Ground HSS for Demanding Metalworking The short HSS-G construction provides a significant increase in Stability compared with longer drills, reducing deflection and enabling more accurate hole placement. This ground variant produces very sharp cutting edges and high Roundness of the bore, which is particularly advantageous when machining alloys and tempered steels. The Type N spiral is the classic metalworking geometry, optimised for consistent chip removal and reliable centring in stationary drilling setups. Faster, Lower-Force Drilling with Reduced Wear Engineered to cut with less effort, the ground HSS geometry can deliver up to 40% faster drilling and requires markedly lower feed forces versus conventional HSS products. The 135° Point Angle decreases initial breakthrough stress on the workpiece and is therefore recommended for harder materials such as stainless steel and cast components. This combination reduces tool wear and supports longer life when used with appropriate cooling and feed rates. Ideal Applications and Target Users Designed for professional workshops and industrial users, this short Twist Drill excels in precision metal fabrication, maintenance and toolroom tasks. Suitable materials include alloyed and unalloyed steel, cast steel, cast iron, sintered iron, non-ferrous metals and hard plastics. The short overhang makes the tool particularly well suited to tasks requiring dimensional accuracy and minimal runout on drilling machines and dedicated fixtures. Handling, Regrinding and Machine Compatibility A ground HSS drill should be used primarily in stationary or rigidly supported drilling machines with appropriate coolant to avoid brittle failure. The fully ground shank ensures consistent chucking stability; regrinding is straightforward for experienced users, preserving cutting geometry. Conformity to DIN 338 ensures predictable dimensions and compatibility with standard toolholders and collets. For precision metalworking choose the MetavCUT Twist Drill — contact METAV Werkzeuge for tailored technical advice and support at info@metav-werkzeuge.com or call +49 2822 7131930, WhatsApp +49 170 2837271 Detailed Specifications for Machine Compatibility Designation: Twist Drill (Spiralbohrer) Brand: MetavCUT SKU: 450375-FDA Type: Type N Diameter: 3.75 mm Overall Length: 70 mm Spiral Length: 39 mm Point Angle: 135° Execution: short Shank Finish: fully ground Material: HSS-G Standard: DIN 338 Colour: bright finished For Machine: Drilling Machine Application: Drills for metal Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the best use for the MetavCUT Twist Drill (Spiralbohrer) Type N? The MetavCUT Twist Drill (Spiralbohrer) Type N is primarily used for machining high-strength materials and larger drill diameters; its short, ground design makes it ideal for precise work in alloyed and unalloyed steels, cast components and hard plastics, delivering clean holes and high runout accuracy. How should the MetavCUT Twist Drill be maintained for longest life? Regular use with suitable coolant and correct feed rates preserves the sharp HSS-G geometry of the MetavCUT Twist Drill; regrinding should be performed by trained personnel to maintain the original point angle and flute geometry for consistent drilling performance. For what is a Twist Drill used? A Twist Drill is mainly applied in the machining of high-strength materials and for larger drill diameters; its geometry is easy to regrind and it withstands significant loads while providing reliable cutting behaviour. Which three drill types exist? The three primary drill types are metal drills, wood drills and stone/concrete drills.
High-performance drill bits for demanding production
Drill bits designed for industrial manufacturing where precision, repeatability and tool life are decisive. Based on a spectrum from HSS and kobalt-alloyed hss-e for universal use to solid carbide drills for high-speed, high-precision serial production, this range covers applications from general engineering to automotive supplier work.
Why these drill bits are essential in the workshop and on the machining centre
Function and behaviour:
- primary use: creating accurate cylindrical holes
- typical machines: CNC machining centres, lathes and drill presses
- key design aspects: optimised chisel edge, defined point angles, flute geometry for reliable chip evacuation
Technical advantages and process benefits:
- reduced feed forces through optimised point geometry
- improved heat control with advanced coatings and, where specified, internal coolant supply
- extended tool life using solid carbide variants and multilayer coatings such as TiN / TiAlN
- process security on challenging materials thanks to tailored materials and geometries
Concrete benefits that boost productivity and quality
- predictable tool life and fewer tool changes, lowering machine downtime
- stable hole quality and consistent tolerances across long runs
- efficient chip control and thermal management for safe deep-hole and hardened-material drilling
- suitability across a wide material range, reducing the need for multiple specialised tools
Metav as a reliable partner for high-precision tooling
Metav combines decades of sector expertise with a broad, dependable offering from its Emmerich facility. With over 48,000 customers and more than 250,000 products, Metav positions its range of drill bits, twist drills and indexable drills as a practical, quality-first choice for procurement managers and production engineers seeking dependable supply and technical competence.
Technical data (at a glance)
- material: HSS, kobalt-alloyed hss-e, solid carbide
- coatings: TiN, TiAlN, advanced nanocoatings
- coolant option: internal coolant feed where specified
- typical applications: mild steel, high-alloy stainless steel, cast iron, non-ferrous metals, technical plastics, hardened materials (use solid carbide variants)
- tool types available: twist drills, solid carbide drills, indexable drills, centre and pilot drills, step drills
FAQ
What is the difference between hss and solid carbide drill bits?
HSS drill bits offer toughness and resistance to breakage for general machining, while solid carbide drills provide higher wear resistance and are the preferred choice for high-speed, high-volume machining and hardened materials.
Which coatings improve tool life for industrial drilling?
Coatings such as TiN and TiAlN increase surface hardness and thermal stability; when combined with the correct drill geometry and, if available, internal coolant, they significantly extend the service life of drill bits.
Can these drill bits be used on CNC machining centres for deep holes?
Yes. Drill bits designed with optimised flute geometry and internal coolant supply are suited to deep-hole machining on CNC machining centres, ensuring controlled chip evacuation and heat management.
How should I choose between twist drills, solid carbide drills and indexable drills?
Select twist drills for general-purpose drilling, solid carbide drills for high-speed and hardened-material applications, and indexable drills for large-diameter holes where insert changes offer economic advantages.
Why choose Metav for drill bits and drilling solutions?
Metav offers a comprehensive selection of drill bits, twist drills and indexable drills combined with sector expertise, centralised supply from Emmerich and proven reliability across thousands of industrial customers.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com