High-precision drills for reliable, high-throughput metalworking
Drills provide the fundamental rotating cutting solution for producing accurate cylindrical holes in materials such as structural steel, high-alloy stainless steel, cast iron, non-ferrous metals and engineering plastics, delivering consistent hole quality and extended tool life in CNC machining and turning centres. This category covers everything from classic twist drill made from high-speed steel for general machining to solid carbide drill optimised for high cutting speeds and long run times, offering advanced coatings and internal coolant options for improved heat management. By using optimised point geometries and split points the tools reduce thrust, prevent walking at the start of the cut and ensure superior surface finish, which benefits sectors from general mechanical engineering to automotive component manufacture.
3.2mm HSS-G Twist Drill DIN 1869 ,extra long, bright finished - MetavCUT
Twist Drill – HSS‑G, Ø 3.2 mm, 135° Tip, Extra Long, Bright Finished (for Drilling Machine), DIN 1869 The Twist Drill is an extra‑long HSS‑G drill for Drilling Machines, engineered for deep metal drilling and precise hole creation in demanding workshop and industrial applications. Extra‑long design for deep metal holes 135° tip for hardened and stainless steels HSS‑G fully ground for precise, clean holes Conforms to DIN 1869 for dependable results Bright finished shank with excellent runout accuracy High performance for deep and demanding metal drilling Designed to deliver measurable efficiency gains, this HSS‑G Twist Drill combines Extra Long geometry with a 135° Tip to reduce start wandering and to penetrate harder materials more reliably. The ground spiral geometry lowers feed forces, enabling faster spindle advance and improved chip evacuation for deep holes. As a result, users experience reduced cycle times and less tool chatter when machining legierte and unlegierte steels, cast steels and harder alloys. Precision manufacturing and what it means for workshop use Because the flute geometry is produced by CNC grinding rather than rolling, the Fully Ground shank and flutes offer sharp cutting edges and superior concentricity. This manufacturing method yields cleaner Holes and better surface finish, especially in metalworking. Note that ground HSS tools can be more brittle than rolled equivalents; applying appropriate coolant and avoiding excessive pecking without lubrication helps to extend tool life and maintain dimensional accuracy. Suited materials and practical application scenarios This Twist Drill is intended primarily for metalworking: Grauguss, legierte and unlegierte Steel up to 1000 N/mm², Gusseisen, non‑ferrous Metals and hard Plastics are appropriate workpieces. Its Deep Hole capability makes it a solid choice for toolrooms, maintenance departments and production lines where through‑holes and blind holes with extended depth are required. For portable or stationary Drilling Machines, the extra overall length supports access to recessed areas without sacrificing Hole quality. Tips for selection, handling and storage to maximise life Select the Diameter and the Extra Long variant when hole depth exceeds standard tool reach; shorter drills are still preferable for small blind depths to reduce deflection. Start with a pilot or centre drill for improved centring when working with stainless or hardened materials. Store Twist Drills in a dry, protected rack to prevent edge damage; regrinding is feasible for HSS‑G tools, restoring cutting geometry while preserving the tool blank for further use. Choose MetavCUT quality for precision deep‑hole drilling — METAV Werkzeuge provides comprehensive technical advice if unsure whether this Twist Drill meets specific requirements. Contact METAV Werkzeuge by email at info@metav-werkzeuge.com, by phone at +49 2822 7131930 or via WhatsApp at +49 170 2837271 for tailored support. Designation: Twist Drill Brand: MetavCUT SKU: 34032-FDA Diameter: 3.2 mm Tip Angle: 135° Overall Length: 250 mm Spiral Length: 170 mm Execution: Extra Long Shank Design: Fully Ground Surface Finish: Bright Finished Material: HSS‑G Standard: DIN 1869 For Use With: Drilling Machine Model Series: Standard Line Packaging Unit: 10 Application: Drills for Metal Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the primary use of a Twist Drill? The MetavCUT Twist Drill is mainly used for machining high‑strength materials and larger hole diameters; its design suits deep drilling and tasks where the tool must withstand higher mechanical loads, offering good suitability for steels, cast irons and hard plastics. Which three drill types exist? Common categories are metal drills, wood drills and stone/concrete drills; the MetavCUT Twist Drill belongs to the metal drill group and is optimised for metalworking applications. Why are Twist Drills sharpened at the point? Sharpening reduces the cross‑edge at the tip, which lowers friction and required feed force and improves centring in the workpiece; the MetavCUT Twist Drill benefits from this by achieving more accurate starts and less walking. Can a metal Twist Drill be used to drill wood? A metal Twist Drill can be used in wood, but the MetavCUT metal drill will usually produce less precise guidance and a rougher finish than a dedicated wood bit; the advantage lies in easier resharpening and lower self‑feeding tendency. For which drilling depths is the Twist Drill most used? For solid drilling operations up to diameters around 20 mm and depths up to 100 mm, the Twist Drill is the most commonly used tool; the MetavCUT Extra Long variant is specifically intended where deeper access or extended working length is required. Is HSS or HSSE better for these applications? The general assumption that HSSE is always superior to HSS is not universally correct; evaluate working conditions carefully to determine whether the higher cost of HSSE is justified for the intended MetavCUT Twist Drill application.
3.2mm HSS-G Twist Drill DIN 1897 ,extra short, bright finished, Type N - MetavCUT
Twist Drill — Metal Drill, 3.2 mm, 135°, Type N, Bright Finished, Extra‑Short, HSS‑G, DIN 1897 (by MetavCUT) The Twist Drill is an extra‑short HSS‑G metal drilling tool designed for precise, stable drilling with hand and drilling machines in tight or thin‑walled workpieces. Extra-short HSS-G for improved stability 3.2 mm Diameter for precise metal drilling 135° Tip Angle for harder materials Cylindrical Shank fits standard chucks DIN 1897 Standard, Type N metal twist drill Precision and stability for demanding metalwork This extra‑short HSS‑G drill offers concentrated rigidity that reduces vibration and lowers the risk of breakage during manual or low‑power drilling. The shortened overall length improves torsional resistance, making it possible to apply higher feed without chatter. For work in legated and unlegated Steels, Cast Steel and Non‑Ferrous Metals, the combination of ground flutes and a carefully shaped tip shortens drilling time and reduces required feed force, yielding cleaner holes and longer tool life. Compact design for tight spaces and thin materials With an overall length of 46 mm and a flute length of 16 mm, the short geometry is ideal where access is limited or where only thin plates and profiles are being drilled. The Cylindrical Shank ensures universal compatibility with standard three‑jaw chucks, while the bright finish improves chip evacuation. This configuration suits hand Drilling Machines and angle heads where a standard‑length tool would be impractical, allowing secure clamping and reliable centring in confined assemblies. Tip geometry and spiral type optimised for harder materials The 135° tip angle is engineered to reduce walking and to penetrate harder materials such as stainless steel with less initial force. As a Type N (normal spiral) tool, this drill provides a balanced helix suitable for many metal types, offering robust cutting action without the aggressive self‑pull of specialised wood drills. The tip geometry also facilitates re‑sharpening: by reducing the cross‑cut length, the regrind preserves centring capability and lowers friction during penetration. Who benefits and how this tool improves workflow Maintenance technicians, metal fabricators and installers who frequently drill in sheet metal, profiles or machine parts benefit from the tool’s increased stability and lower feed requirements. Conformity to DIN 1897 and the Standard Line series ensures consistent dimensions and interchangeability, supporting predictable setup times and fewer tool changes. The drill’s robust build and compatibility with common chucks make it a practical choice for everyday metalworking tasks where reliability and repeatability matter. Strong recommendation: choose MetavCUT’s extra‑short Twist Drill for precise, low‑force metal drilling — for expert advice and tailored technical support contact METAV Werkzeuge by eMail at info@metav-werkzeuge.com, by phone at +49 2822 7131930 or via WhatsApp at +49 170 2837271 Bezeichnung: Twist Drill Brand: MetavCUT SKU: 56032-FDA Diameter: 3.2 mm Tip Angle: 135° Type: Type N Execution: Extra short Finish: Bright finished Material: HSS-G Norm: DIN 1897 Flute Length: 16 mm Overall Length: 46 mm Shank: Cylindrical For Drill Machine: Drilling Machine Application: Drills for metal Model Series: Standard Line Packaging Unit: 10 Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the Twist Drill by MetavCUT used for? The MetavCUT Twist Drill (Type N) is primarily used for machining high‑strength and ordinary metals and for larger drill diameters; its extra‑short design improves stability, makes regrinding easier and stands up to higher loads during work in Steel, Cast Iron and other hard materials. Which three drill types are there? There are three main drill categories: Metal drill, Wood drill and Stone/Concrete drill. The MetavCUT Twist Drill belongs to the metal drill group and is optimised for drilling in metal rather than in soft timber or masonry.
3.2mm HSS-G Twist Drill DIN 338 ,fully ground, silver - MetavCUT
Twist Drill — Drill Bit, 3.2 mm, 118° Point, Fully Ground, Silver, HSS‑G, DIN 338 (Hex Shank) by MetavCUT A Twist Drill metal drill bit designed for drilling machines and hand drills, combining a fully ground HSS‑G geometry with a 118° point for precise work in metals. 3.2 mm Diameter for precise holes Fully ground HSS‑G for fast metal drilling 118° Point Angle suited for softer metals Hex Shank (6.3 mm) for secure clamping Complies with DIN 338 for consistent quality Faster metal drilling with precision-ground geometry The fully ground HSS‑G construction delivers markedly improved cutting behaviour compared with roll‑formed variants. Thanks to the grinding process, the flute Geometry and cutting edges are exceptionally sharp, which can result in up to 40% faster drilling and markedly lower feed forces. This makes the bit particularly efficient when machining alloyed and unalloyed steels, cast materials and non‑ferrous metals while producing clean, precise holes and excellent surface quality. Secure clamping and easy tool changes with hex shank Equipped with a Hex Shank, compatible with E6.3 (approx. 6.3 mm) quick‑change bit holders and many cordless driver adapters, the bit offers form‑fit torque transmission and reduced slippage in the chuck. The hex design also speeds up tool changes in everyday workshop routines and allows clamping in standard chucks when required, combining the convenience of portable use with the stability needed for accurate metal drilling. Dimensions and standardisation for reliable machining Manufactured to DIN 338, this bit provides standard dimensions and tolerances: 3.2 mm cutting diameter, 35 mm spiral length and 85 mm overall length, with a 118° point angle optimised for easier entry into softer metals and aluminium. The geometry supports good centring behaviour on slightly curved surfaces and the configuration is intended primarily for use in drilling machines and hand drills when processing metals. Intended users and recommended working conditions Designed for workshop professionals, maintenance technicians and metalworking hobbyists, the bit suits tasks that demand precision and repeatability. While the grinding process gives excellent sharpness and accuracy, ground HSS can be relatively more brittle than rolled equivalents; therefore stationary use with adequate cooling is recommended for heavy‑duty continuous operations. The bit is straightforward to re‑sharpen when needed, extending service life with correct handling. Strong recommendation: Choose MetavCUT quality — the Twist Drill is ideal for precise metalworking tasks; for technical advice or help selecting the right geometry for your application contact METAV Werkzeuge at info@metav-werkzeuge.com, phone +49 2822 7131930 or WhatsApp +49 170 2837271 Designation: Twist Drill (Twist Drill for Metal) Brand: MetavCUT Model Series: Standard Line Material: HSS‑G Execution: Fully ground Colour: Silver Diameter: 3.2 mm Spiral Length: 35 mm Overall Length: 85 mm Point Angle: 118° Shank Execution: Hexagonal (6‑kant), compatible with E6.3 / 1/4" holders Application: Drills for Metal; suitable for Drilling Machine / Hand Drill Standard: DIN 338 Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the Twist Drill used for? The MetavCUT Twist Drill (Twist Drill for Metal) is mainly applied when machining high‑strength materials and larger hole diameters; its ground flute geometry provides sharp cutting edges and high run‑out accuracy, producing clean and precise boreholes even in demanding metalworking tasks. Which 3 drill types exist? In broad terms there are three common drill categories: Metal drills, Wood drills and Stone/Concrete drills; the MetavCUT Twist Drill belongs to the metal drill family and is optimised for machining metals rather than masonry or timber. Why are Twist Drills pointed? The point grind reduces the chisel edge at the tip of the Twist Drill, which significantly lowers friction and thus requires less feed force; at the same time the sharpened tip improves centring in the workpiece for more accurate starts. Can the Twist Drill be used for wood? A metal drill such as the MetavCUT Twist Drill can be used in wood, but guidance and finish are generally inferior compared with a purpose‑designed wood bit; metal drills are easier to re‑sharpen and have less aggressive self‑feeding characteristics.
3.2mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Twist Drill Type N (3.2 mm, 135°) — Short, Bright Finished, HSS‑G, DIN 338 — MetavCUT The Twist Drill Type N is a short HSS‑G drill bit designed for Drilling Machines and metalworking applications, optimised for stable, precise holes in hard materials. HSS‑G for faster cutting and lower feed force Short design for higher stability and less deflection 135° tip angle for hard and stainless materials Fully ground shank for precise clamping and concentricity Conforms to DIN 338 classification for short spiral drills Faster metalworking thanks to HSS‑G technology Equipped with HSS‑G, this short Twist Drill delivers noticeably higher cutting performance while requiring less contact pressure. The hardened material and ground geometry allow the bit to cut more efficiently in alloyed and unalloyed steels, cast steel and non‑ferrous metals. As a direct benefit, cycle times on production and maintenance tasks are reduced and operator fatigue is lowered because less feed force is necessary. Greater stability and accuracy with the short design A Short overall length reduces overhang and improves Stability during drilling operations, which lowers the risk of wander and breakage. The 135° tip angle is optimised for harder materials and supports faster penetration with better centring on curved or tough surfaces. This combination helps achieve cleaner holes and consistent diameters, making the tool suitable for precision assemblies and repeatable workshop work. Designed for Drilling Machines and demanding conditions Made according to DIN 338 and classified as Type N, the bit is intended for use on stationary and portable Drilling Machines where robust metal drilling is required. The Bright Finished surface supports smooth chip evacuation and visual inspection, while the geometry is tuned for common metalworking tasks. Where required, the tool can be used in a variety of machine setups, provided appropriate speeds and feeds are observed. Practical features that support workshop efficiency The Fully Ground shank enables reliable clamping and concentricity in standard chucks, reducing runout and improving hole quality. Combined with the short flute length and the Basic Line design, the bit offers a balance of Precision and ease of resharpening for maintenance routines. For fabrication environments that prioritise repeatable results, this configuration minimises rework and extends usable tool life. Strong recommendation: Choose the MetavCUT HSS‑G Twist Drill Type N for reliable, high‑stability metal drilling; METAV Werkzeuge provides expert consultation if you are unsure about suitability or need additional technical data — Email: info@metav-werkzeuge.com ☎️ +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Technical data Designation: Twist Drill Short Type N Brand: MetavCUT SKU: 27032-FDA Diameter: 3.2 mm Tip Angle: 135° Type: Type N Material: HSS‑G Execution: Short Shank Finish: Fully ground Brightness/Coating: Bright Finished Application: Drill for Metal / Drilling Machine Spiral Length: 36 mm Overall Length: 65 mm Standard: DIN 338 Model Series: Basic Line Colour: Bright finished Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the MetavCUT Twist Drill Type N primarily used for? The MetavCUT Twist Drill Type N is primarily applied to machining high‑strength materials and larger drill diameters in metalworking. Its ground HSS‑G construction enables up to 40% faster drilling with reduced feed forces, making it suitable for alloyed and unalloyed steel, cast materials and hard plastics; the short design also supports greater stability under load. Which three drill types exist? When selecting drill bits, the main categories are metal drills, wood drills and masonry/concrete drills; the MetavCUT Twist Drill Type N belongs to the metal drill group and is optimised for metalworking rather than wood or stone applications.
3.2mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Twist Drill short Type N — 3.2 mm · 135° tip · HSS‑G · DIN 338 · Bright finished · Fully ground shank The Twist Drill short Type N is a precision metalworking drill for Drilling Machine use, 3.2 mm diameter with a 135° tip for stable, accurate holes in hard materials. Short design for improved stability 3.2 mm diameter for precise holes 135° tip for hard materials HSS‑G fully ground for clean cuts Complies with DIN 338 for short drills Higher precision and faster machining thanks to short geometry The short geometry of this HSS‑G Twist Drill reduces the overhang from the Chuck, which noticeably improves Stability and reduces bending during drilling. As a result, users benefit from cleaner holes and longer tool life under the same operating conditions. The fully ground flute geometry provides very sharp cutting edges and high runout accuracy, so the tool can achieve up to 40% faster drilling and requires about 50% less feed force compared with conventional HSS drills when applied under suitable conditions. Optimised for demanding metal applications Designed as a Type N normal‑spiral cutter, the short Twist Drill is particularly suitable for drilling alloyed and unalloyed Steel, Cast Steel, Cast Iron, Sintered Iron, Non‑Ferrous Metals and hard Plastics. Its 135° tip shortens the entry time and improves centring when working with tougher materials such as stainless steel. Use with appropriate cutting fluid and correct speeds to maintain edge quality and to avoid thermal softening when drilling higher strength alloys. Why the DIN 338 and the ground design matter DIN 338 classifies short Twist Drills with cylindrical shanks and defines dimensional and manufacturing characteristics; conformity means predictable interchangeability and performance. A ground (HSS‑G) flute is produced by CNC grinding rather than rolling, which creates very sharp cutting lips and excellent concentricity. This makes the drill ideal where precision is essential, while its production method can make the tool slightly less tolerant to shock loads—best results are achieved in stationary or well‑supported drilling setups. Who benefits and practical handling tips Workshops, toolrooms and professional metalworking environments gain most from the short Type N Twist Drill. The reduced length improves control for bench or machine use and is especially helpful for repetitive precision work. For best outcomes, secure the workpiece, select speeds matched to the material, and use coolant for higher duty cycles. If unsure whether this MetavCUT short Twist Drill suits a specific task or machine, METAV Werkzeuge offers expert, application‑oriented advice to ensure the right tool choice. Strong recommendation: For precise, stable metal drilling choose the MetavCUT short Twist Drill — contact METAV Werkzeuge for expert consultation at info@metav-werkzeuge.com, by phone +49 2822 7131930 or via WhatsApp +49 170 2837271 Technical Information Designation: Twist Drill (Short Spiralbohrer) Brand: MetavCUT SKU: 48032-FDA Diameter: 3.2 mm Overall length: 65 mm Spiral length: 36 mm Tip angle: 135° Type: Type N Execution: short Shank execution: fully ground Colour / Finish: bright finished Material: HSS‑G (ground High Speed Steel) Standard: DIN 338 Application: Drills for metal For drilling machine: Drilling Machine Model series: Profi Line Shaft: cylindrical, ground Packaging unit: 10 Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is a Twist Drill used for? The MetavCUT Twist Drill Type N is primarily used for machining high‑strength workpieces and larger drill diameters; it is well suited to metalworking tasks where a short, stable tool is required. Its ground geometry is easy to sharpen and withstands higher loads, making it a solid choice for precision holes in steel and cast materials. Which three drill types exist? The main categories of drill are Metal drills, Wood drills and Stone/Concrete drills. The MetavCUT Twist Drill Type N falls into the Metal drills group and is optimised for steel and similar materials.
3.2mm HSS-G Twist Drill DIN 338 ,short, TIN-coated - MetavCUT
MetavCUT Twist Drill (Short, 3.2 mm) – HSS‑G, TIN‑coated, 118°, DIN 338 The MetavCUT Twist Drill is a short HSS‑G drilling tool designed for precision metalworking with a 3.2 mm diameter and a 118° point angle for versatile use in Drilling Machines. Short design for higher drilling stability Fully ground shank for accurate concentricity TIN‑coated for reduced friction and longer life Conforms to DIN 338 for short twist drills Optimised for drilling in alloyed and unalloyed steel Consistent Precision and Reduced Runout for Metalworking Short, robust geometry reduces deflection and results in higher accuracy when drilling metal. The shortened overall length and a fully ground shank ensure excellent concentricity in stationary or portable Drilling Machines, producing clean holes with minimal runout. This design is particularly beneficial when working with hard materials where stability directly improves hole quality and tool life. Faster Penetration with Less Feed Force The HSS‑G substrate combined with a sharpened cutting geometry enables up to 40% faster drilling while requiring significantly less axial pressure compared with conventional HSS drills. This efficiency reduces operator fatigue and allows more controlled machining in demanding applications, especially when paired with appropriate coolant to manage heat generation. Titanium Nitride Coating Extends Service Life A TIN‑coating lowers friction between Tool and Workpiece, decreasing wear rates and enhancing resistance to abrasion. With an adequate cooling strategy, the coating helps maintain cutting-edge sharpness and promotes longer intervals between regrinds, which is advantageous for frequent production tasks and for machining mixed non‑ferrous and ferrous materials. Designed for Tough Materials and Diverse Applications With a 118° point angle, this short Twist Drill balances centring and cutting action, making it suitable not only for softer metals but also for harder steels when used under the correct conditions. Typical applications include machining of alloyed and unalloyed steel, cast steels, sintered iron, non‑ferrous metals such as Copper and Bronze, and certain engineering plastics. Practical Handling and Regrindability The ground flute geometry allows easier re‑sharpening and produces consistently sharp cutting edges. Although ground drills can be comparatively more brittle than rolled versions, their exceptional cutting precision and clean chip evacuation make them the preferred choice for accurate metalworking tasks in both workshop and industrial settings. Strongly recommended: For technical queries or support regarding the suitability of the MetavCUT Twist Drill for specific materials or machines, METAV Werkzeuge offers expert consultation – Email: info@metav-werkzeuge.com; Phone: +49 2822 7131930; WhatsApp: +49 170 2837271 Technical Specifications Designation: Twist Drill Brand: MetavCUT SKU: 28032-FDA Diameter: 3.2 mm Overall Length: 65 mm Spiral Length: 36 mm Point Angle: 118° Material: HSS‑G (ground high speed steel) Coating/Colour: TIN‑coated Shank Execution: Fully ground Execution / Type: Short Suitable for: Drilling Machine (Hand Drilling Machines) Application: Drills for Metal Model Series: Basic Line Standard: DIN 338 Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the primary use of the MetavCUT Twist Drill and where does it perform best? The MetavCUT Twist Drill (short, HSS‑G) is primarily used for machining metal and performs best in applications requiring stability and precision, such as drilling alloyed and unalloyed steel, cast iron, and non‑ferrous metals when used with suitable coolant and correct machining parameters. For what is a Twist Drill used? A Twist Drill is mainly applied in the machining of high‑strength materials and for larger bore diameters; its geometry allows relatively simple regrinding and it withstands greater loads, making it suitable for demanding metalworking tasks. Which three drill types are commonly distinguished? The three common drill types are Metal drills, Wood drills, and Masonry/Concrete drills. Why is a Twist Drill pointed? The pointing reduces the cross‑cut at the tip, which significantly lowers friction and therefore the required feed forces; this sharpening also improves the drill’s centring in the Workpiece and helps achieve cleaner, more accurate holes. If you are unsure whether this Twist Drill meets your requirements or need further technical specifications, METAV Werkzeuge provides competent advice and support — please contact us at info@metav-werkzeuge.com or call +49 2822 7131930.
3.2mm HSS-G Twist Drill DIN 338 ,short, TIN-coated, Type N - MetavCUT
Twist Drill Type N — short, TIN-coated HSS‑G, Ø 3.2 mm, 135° (DIN 338) by MetavCUT The Twist Drill Type N is a short HSS‑G metal drill designed for Drilling Machines, offering high stability and long tool life for precision metalworking. Short design for higher stability TIN-coated surface extends tool life Fully ground shank for precise runout 135° tip for hard and stainless steels Conforms to DIN 338 for short HSS drills Superior durability and consistent performance in metalworking This short HSS drill combines a TIN‑coated surface with HSS‑G material to reduce friction and increase service life when drilling metals. The coating lowers wear especially under appropriate cooling, which extends tool life during repetitive production tasks. The Type N geometry ensures reliable chip removal and consistent hole quality in a range of ferrous and non‑ferrous materials, so workshops benefit from fewer tool changes and more uptime. Geometry that improves accuracy and reduces effort A reduced overhang and shorter overall length give this short twist drill noticeably better stability and less tendency to deflect. The fully ground flute geometry reduces cutting forces and enables up to around 40% faster penetration with up to 50% less feed force compared to conventional HSS drills under the right conditions. The 135° point angle is optimised for harder materials and short‑run precision, improving centre‑starting and reducing wander on tough workpieces. Built for demanding applications and practical use Designed primarily for metalworking, the short HSS variant is particularly suitable for precise tasks in toolrooms, maintenance and engineering workshops. Typical use cases include drilling in alloyed and unalloyed steel, temper castings, cast iron, copper, bronze and hard plastics. While compatible with standard Drilling Machines, best results are achieved with steady clamping, correct speeds and the use of coolant for longer life and cleaner holes. Standardised quality and handling notes for reliable results Manufactured to DIN 338, this short twist drill is available with a fully ground shank that provides superior runout accuracy compared with rolled versions. Ground drills deliver cleaner holes and higher concentricity but can be more brittle; therefore, a controlled feed, appropriate speeds and coolant are recommended. The drill’s Type N spiral is the classic metalworking geometry and should be selected when consistent metal drilling performance is required. Strong recommendation: Choose the MetavCUT Twist Drill Type N for workshop precision and contact METAV Werkzeuge for personalised advice and ordering support — reliable guidance and technical consultation are available via eMail info@metav-werkzeuge.com, Phone +49 2822 7131930 and WhatsApp +49 170 2837271 Technical data Designation: Twist Drill Brand: MetavCUT SKU: 46032-FDA Diameter: 3.2 mm Point angle: 135° Overall length: 65 mm Flute length: 36 mm Execution: short Shank finish: fully ground Material: HSS-G Coating: TIN-coated Type: Type N Standard: DIN 338 Application: Drills for metal Model series: Standard Line Suitable for: Drilling Machine Packaging unit: 10 Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What are Twist Drills used for and where does the MetavCUT Type N excel? The MetavCUT Twist Drill Type N is primarily used for machining high‑strength and hard materials; it is especially effective for larger diameters in metal. Its construction and coating make it suitable for precision work in steels, cast materials and non‑ferrous metals where longevity and repeatable hole quality are needed. Which three drill types exist? Commonly differentiated drill types are metal drills, wood drills and stone/concrete drills; the MetavCUT Twist Drill Type N belongs to the metal drill category and is optimised for metalworking tasks. Why are Twist Drills pointed? Pointing reduces the cross‑cut at the tip of the Twist Drill, which significantly lowers friction and thus reduces the required feed force; at the same time a sharpened point improves centring in the workpiece for more accurate starts. Can a Twist Drill be used to drill wood? A metal Twist Drill such as the MetavCUT Type N can be used in wood, but guidance is poorer and the hole finish is less clean compared with purpose‑made wood bits; however, metal drills are easier to re‑sharpen and usually exhibit less self‑feeding. For which drilling depths is the Twist Drill most used? The Twist Drill is the go‑to tool for through holes and solid drilling. For diameters up to about 20 mm and drilling depths up to approximately 100 mm, the Twist Drill is the most commonly used tool. What is better, HSS or HSSE? The general assumption that HSSE is always superior to HSS is not universally correct; choice depends on working conditions and cost‑benefit considerations, so evaluate whether the specific job justifies the higher expense of HSSE over HSS.
3.2mm HSS-G Twist Drill DIN 338 ,short, TIN-coated, Type N - MetavCUT
Twist Drill — short Type N, 3.2 mm, 135°, TIN-coated, HSS-G, DIN 338 (MetavCUT Profi Line) The Twist Drill short Type N is a precision metalworking drill for Drilling Machines, designed for stable, high-performance holemaking in a wide range of metals. Short design for increased stability and precision TIN-coated surface for reduced friction and longer tool life Fully ground HSS-G for cleaner holes and faster drilling 135° point angle optimised for harder materials Complies with DIN 338 for short cylindrical shank drills Precision and efficiency for demanding metalwork The Twist Drill combines a HSS-G substrate with a fully ground geometry to deliver measurable performance benefits when machining metals. The shortened overall length and reduced overhang minimise deflection, which translates into cleaner holes and improved repeatability. Thanks to the grinding process, the flute geometry produces sharp cutting edges and excellent runout behaviour. For hard or alloyed steels the 135° point angle reduces wandering at the start of the cut and shortens the approach time, so the tool performs reliably under higher loads. Surface engineering that extends service life A TIN-coated finish lowers friction and heat generation at the cutting edge, so wear is reduced when used with appropriate cooling. The coating supports longer tool life during continuous metalworking applications and improves resistance to abrasive wear on non-ferrous materials. When combined with coolant, the Titanium Nitride layer helps maintain cutting geometry over a larger number of holes, reducing downtime for tool changes and ensuring consistent hole quality. Geometry and form for stable, accurate holes The drill’s fully ground flute geometry and short spiral length offer better centring and decreased thrust force during penetration. With a Spiral Length of 36 mm and an Overall Length of 65 mm for a 3.2 mm diameter, the construction minimises chatter and bending moments typical of longer tools. The fully ground shaft enables up to 40% faster drilling rates and requires significantly less axial force compared with conventional HSS drills, making it particularly suitable for stationary and portable Drilling Machines when precision is crucial. Who benefits and when to seek expert help This tool is aimed at professional metalworkers, tool rooms and maintenance technicians who need repeatable, high-quality bores in materials such as alloyed and unalloyed steel, cast iron, sintered metals and non-ferrous metals. If uncertainty remains about suitability for a particular application or required coolant strategy, METAV Werkzeuge provides extensive and competent advice to ensure the correct tool choice and cutting parameters. Their guidance helps avoid tool breakage and optimises process reliability. We recommend the MetavCUT Twist Drill short Type N for precision metalworking and encourage you to contact METAV Werkzeuge for personalised, expert advice — eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 | WhatsApp: +49 170 2837271 Technical details Designation: Twist Drill Marke: MetavCUT SKU: 41032-FDA Diameter: 3.2 mm Point angle: 135° Type: Type N Execution: short Colour / Coating: TIN-coated Shank execution: fully ground Spiral length: 36 mm Overall length: 65 mm Material: HSS-G Standard: DIN 338 Application: Drills for metal For Drilling Machine: Drilling Machine Model series: Profi Line Packaging unit: 10 Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What are Twist Drills mainly used for? Twist Drills from MetavCUT, short Type N, are primarily used for machining high-strength materials and for larger drill diameters; their form allows relatively easy regrinding and they withstand elevated loads, making them suitable for demanding metalworking tasks. Which three drill types exist? The three main drill categories are metal drills, wood drills and stone/concrete drills, with the MetavCUT Twist Drill belonging to the metal drill group optimised for ferrous and non-ferrous alloys. Why are Twist Drills point-ground? Point grinding reduces the cross-cut at the tip of the Twist Drill, significantly lowering friction forces and thus the required feed. This sharpening also improves centring of the drill tip in the workpiece. Can a metal drill be used in wood? A metal drill such as the MetavCUT Twist Drill can be used in wood but offers poorer guidance and a less clean result compared with wood-specific bits; however, metal drills are easier to regrind and present lower self-feed tendencies. For what drilling depths is the Twist Drill most commonly used? A through-hole in solid material is often executed with a Twist Drill; for diameters up to 20 mm and drill depths up to 100 mm the Twist Drill is the most frequently used tool. Is HSS or HSSE better? The common assumption that HSSE steels are inherently superior to standard HSS is not universally true; evaluate working conditions carefully to decide if the higher purchase cost of HSSE is justified for your application.
3.2mm HSS-G Twist Drill DIN 340 ,long, bright finished - MetavCUT
Twist Drill Spiralbohrer (HSS‑G, 3.2 mm, 135°, long) — MetavCUT, DIN 340, Bright Finished, Fully Ground The Twist Drill Spiralbohrer is a long HSS‑G metal drill designed for deep and hard‑material drilling with a 135° point angle for use in drilling machines. Long HSS‑G design for deep hole drilling 3.2 mm diameter for precise pilot and through holes 135° tip for improved centring in hard materials Fully ground shank for high concentricity and clean holes Deeper holes with reliable stability For tasks that require depth and precision, this long Twist Drill delivers a clear advantage. The extended overall length and longer Spiral Length allow reaching recessed or less accessible drilling points without extensions. Thanks to the HSS‑G material and DIN 340 specification, the drill maintains cutting performance when penetrating thicker sections, while the bright finished surface reduces friction. This results in fewer tool changes and consistent hole quality for metalworking operations. Designed for harder materials and fast cutting A 135° point angle reduces the initial bite and improves centring on tough substrates such as alloyed and unalloyed steel, cast materials and sintered metals. The ground geometry achieved by CNC grinding creates sharp cutting edges that contribute to up to 40% faster drilling and lower required feed force compared with conventional HSS drills. This combination supports more efficient machining and a smoother feed, especially when used with appropriate cooling. High concentricity and precise results The fully ground shank and ground flutes ensure excellent runout characteristics and produce cleaner, more accurate holes. Reduced vibration and improved concentricity protect both the tool and the workpiece, which is particularly beneficial when producing tight‑tolerance bores. Users will notice less burr formation and better surface finish, making subsequent processing steps easier and reducing rework. Practical use and target applications This Spiralbohrer is optimised for use in drilling machines and is primarily intended for metalworking: drilling in alloyed steel, cast iron, temper cast and non‑ferrous metals as well as hard plastics. The long version is especially suited to workshops and industrial settings where deeper bores are frequent. For occasional home or light workshop use, ensure appropriate clamping, speed and coolant to benefit from the drill’s properties. We recommend choosing MetavCUT tools when deep, precise metal drilling is required — for further advice METAV Werkzeuge provides expert consultation: info@metav-werkzeuge.com, Tel +49 2822 7131930, WhatsApp +49 170 2837271 Designation: Twist Drill Spiralbohrer Brand: MetavCUT SKU: 53032-FDA Diameter: 3.2 mm Overall length: 106 mm Spiral length: 69 mm Point angle: 135° Version: long Shank finish: fully ground Material: HSS‑G Standard: DIN 340 Colour: bright finished Application: Drills for metal For drilling machine: Drilling Machine Model series: Standard Line Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What materials is the Twist Drill Spiralbohrer by MetavCUT suitable for? The MetavCUT Twist Drill Spiralbohrer is intended primarily for metalworking and performs well in alloyed and unalloyed steel, Cast Steel, Gusseisen, Sintered Iron, Tempered Cast materials, non‑ferrous metals and hard plastics when used with proper machining parameters. How should the MetavCUT Twist Drill Spiralbohrer be used to maximise tool life? When using the MetavCUT Twist Drill Spiralbohrer, apply suitable cutting speeds, coolant and clamping; the fully ground HSS‑G geometry benefits from controlled feed and cooling to avoid chipping and to maintain concentricity for consistent hole quality. For what are Twist Drills used? The Twist Drill Spiralbohrer from MetavCUT is mainly used for machining high‑strength materials and large drill diameters; its shape is easy to grind and withstands higher loads. Which 3 drill types exist? Regarding common types, there are Metal drills (such as the MetavCUT Twist Drill Spiralbohrer), Wood drills, and Stone/Concrete drills.
3.3mm Double-Ended HSS Body Drill Short Spiral Cross-Cut Cylinder Shank - TECWERK
Efficient, double-ended design and HSS construction combine to deliver reliable drilling performance in thin sheet materials; the profile-ground cutting edges and short spiral ensure clean holes with minimal burrs. Order the drill directly via Metav Werkzeuge or consult their specialists for selection and supply. Double-ended 3.3 mm HSS body drill by TECWERK — profile-ground, short spiral The Double-ended 3.3 mm HSS body drill is a twin-ended, profile-ground twist drill engineered for clean piercing of thin sheet metal and bodywork applications with hand-held drills. Solid HSS construction Profile-ground for accurate holes Short spiral suited to thin sheets Cylinder shank for secure mounting Consistent hole quality for thin materials The combination of HSS material and a profile-ground point geometry produces consistent, repeatable holes in thin materials such as automotive sheet metal. The 3.3 mm diameter provides a standard pilot size for many fastening operations, while the double-ended layout halves tool changes and increases uptime. Profile grinding refers to the precise shaping of the cutting edges to create a clean entry and controlled chip formation; this reduces heat build-up and limits deformation in delicate panels, which is crucial for maintaining finished-part appearance in bodywork. Design details that aid workshop efficiency A cylinder shank enables secure clamping in standard chucks of hand-held drills, and the short spiral flute promotes rapid chip evacuation when working with thin gauges. The right-hand cutting geometry with cross grind improves stability and centring on the workpiece, reducing walking at the hole start. These design choices favour straightforward workshop handling: compatible with common drilling equipment, the tool supports fast changeover and predictable drilling behaviour, helping to keep production or repair tasks flowing without specialised fixturing. Durable, practical specification for bodywork tasks The plain, uncoated finish offers a clean cutting behaviour and straightforward reconditioning if required. The tool is described as a bodywork drill, optimised for thin materials and sheet-metal applications rather than hardened components; its construction focusses on toughness and edge retention typical of high-speed steel. Technical details such as the cross grind are intended to enhance centring and burr control, while the twin-ended format extends effective usage between tool swaps, contributing to lower process interruptions in busy workshops. For expert advice on TECWERK double-ended drills and reliable supply from Metav Werkzeuge in Emmerich, contact Metav Werkzeuge by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data Article number: 2000860133NW Article name: Double-ended body drill, 3.3 mm, HSS, TECWERK Brand: TECWERK Facts Diameter: 3.3 mm Double-ended Shank type: cylinder Pack size: 10 Special features Material: HSS Profile-ground cutting edges Right-hand cutting Cross grind Short spiral Suitable for thin materials and sheet metal Plain (uncoated) finish Designed for hand-held drills FAQ Is this drill suitable for hand-held drills? The TECWERK double-ended 3.3 mm HSS body drill is designed primarily for use with hand-held drills and offers a cylinder shank for secure chucking. Which materials can be machined with this drill? The tool is intended for thin materials and sheet metal, making it suitable for bodywork and light fabrication tasks; it is not specified for high-hardness steels. What benefits does the profile-ground point provide? Profile-ground cutting edges improve centring and produce cleaner holes with reduced burr formation, which is especially beneficial when working on automotive panels and similar thin-gauge materials. How does the double-ended design affect workshop efficiency? A twin-ended tool effectively doubles the available cutting life per item, reducing the frequency of bit changes and increasing productive uptime for repetitive drilling tasks. TECWERK: Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
3.3mm HSS Twist Drill DIN 338 ,short, roll forged, black, Type N - MetavCUT
Twist Drill (Type N) — 3.3 mm, HSS, short, 118° point, black, DIN 338 by MetavCUT A compact Twist Drill (Type N) designed for precision metalworking in hand drills and drilling machines, offering a short, stable geometry and a 118° point for reliable centring. Short HSS design for higher stability 118° point angle for improved centring Type N normal spiral optimised for metal DIN 338 specification for consistent quality Black finish with 65 mm overall length Outstanding Stability and Precision for Metalworking The Twist Drill in short HSS execution delivers enhanced stability thanks to its reduced protruding length and a stiffer design. This configuration reduces deflection during machining, resulting in cleaner holes and better repeatability when drilling metal. Short drills are particularly suitable for operations where rigidity and accuracy matter, such as jig or fixture work and reworking on portable equipment. Material and Manufacturing Advantages that Matter Manufactured from HSS (High Speed Steel) and produced according to DIN 338, this short twist drill combines toughness and wear resistance for typical metal applications. HSS offers elasticity that reduces breakage risk on small diameters and permits straightforward resharpening. The Type N normal spiral is the classic choice for steel, cast iron and non-ferrous metals, ensuring a balance between cutting action and tool life. Design Features That Improve Workflow Equipped with a 118° point angle and a conventional flute geometry, the tool provides reliable chip evacuation and easy centring on flat or slightly curved surfaces. The short overall length (65 mm) and flute length (36 mm) make the drill less prone to vibration, which shortens cycle times by reducing the need for rework. The black surface finish supports identification and handling in busy tool sets. Who Benefits Most from This Twist Drill This product is aimed at workshop professionals and maintenance technicians who require a robust, easy-to-sharpen drill for metal fabrication and repair. The combination of HSS material, Type N geometry and DIN 338 conformity makes it a practical choice for everyday metal drilling tasks on portable and stationary drilling equipment. For specialist materials or deeper holes, alternative geometries may be preferable. Strong recommendation: For reliable, precision metal drilling choose the MetavCUT Twist Drill (Type N) — METAV Werkzeuge offers expert consultation and comprehensive technical support; contact via eMail: info@metav-werkzeuge.com, Phone: +49 2822 7131930 or WhatsApp: +49 170 2837271 Designation: Twist Drill Brand: MetavCUT SKU: 40033-FDA Diameter: 3.3 mm Point Angle: 118° Type: Type N Material: HSS (High Speed Steel) Execution: short Standard: DIN 338 Colour: black Overall Length: 65 mm Spiral (Flute) Length: 36 mm Application: Drills for metal / suitable for Drilling Machine (Hand Drill) Packaging Unit: 10 Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is a Twist Drill used for and which materials suit the MetavCUT Twist Drill (Type N)? The MetavCUT Twist Drill (Type N) is primarily intended for machining metal; it is suitable for alloyed and unalloyed steel, cast iron, non-ferrous metals and many plastics. Its HSS construction provides elasticity and resistance, making it a dependable choice for standard metal drilling tasks with hand and machine tools. Which three drill types exist? Commonly distinguished drill types are metal drills, wood drills and masonry/concrete drills. The MetavCUT Twist Drill belongs to the metal drill category and is optimised for metalworking applications.
3.3mm HSS-G Body Drill ,double sided, black finished without margin - MetavCUT
Body Drill (Karosseriebohrer) — MetavCUT HSS-G, 3.3 mm, 135° double-sided, black finished, fully ground shaft Body Drill (Karosseriebohrer) is a double-ended HSS-G Twist Drill designed for precision metal drilling in demanding applications, combining a 3.3 mm diameter and 135° point angle for reliable results in hard materials. Double-ended design for extended tool life HSS-G fully ground for precise metal holes 3.3 mm diameter with 135° point for tough steels Short robust shank for stable drilling Black finished without margin for minimal burrs Faster, cleaner holes thanks to precision ground HSS-G Because the HSS-G geometry is produced by CNC grinding rather than rolling, the drill achieves very sharp cutting edges and high run-out accuracy. This results in cleaner holes and improved surface quality when working with Steel, Cast Iron or Non-Ferrous Metals. For workshop environments where repeatable precision matters, the fully ground shank helps reduce vibration and ensures consistent centring when used with a hand or bench Drilling Machine. Double-ended design reduces downtime and material waste A double-sided configuration makes this Twist Drill effectively "two tools in one": if one tip becomes blunt, the part can be reversed to use the other end. This feature is particularly advantageous in sheetmetal and bodywork applications where quick tool changes are costly. Users benefit from longer service intervals and fewer interrupted jobs, while the short, robust form offers higher stability for drilling holes for rivets and thin-sheet fastenings. Optimised geometry for hard materials and reduced feed effort The 135° point angle is chosen specifically for harder materials, improving the initial penetration and increasing tool life under elevated loads. The specially ground geometry allows up to 40% faster drilling and requires about 50% less thrust compared with conventional HSS drills, making operations less strenuous and more efficient. For tasks requiring accurate centring and reduced burr formation, this Body Drill offers tangible productivity gains. Who benefits most — versatile use in metalworking This drill is aimed at professionals and serious hobbyists in Automotive, Fabrication and Repair workshops who need a compact, reliable Twist Drill for metal operations. The 3.3 mm diameter and 46 mm overall length make it suitable for common fastening and hole-preparation tasks in alloyed and unalloyed steel, cast materials and engineering plastics. The black finished surface reduces adhesion of chips and helps maintain cutting performance in repeated cycles. Choose the MetavCUT double-ended HSS-G Body Drill as a robust Twist Drill for precision metalwork and contact METAV Werkzeuge for personalised technical advice via info@metav-werkzeuge.com, phone +49 2822 7131930 or WhatsApp +49 170 2837271 Designation: Body Drill (Karosseriebohrer) Brand: MetavCUT SKU: 59033-FDA Material: HSS-G Diameter: 3.3 mm Point angle: 135° Overall length: 46 mm Spiral length: 10 mm Execution: double-sided Shank finish: fully ground Colour: black finished without margin For machine: Drilling Machine Application: Drills for metal Model series: Profi Line Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the MetavCUT Body Drill (Twist Drill) mainly used for? The MetavCUT Body Drill (Twist Drill) is primarily applied to machining high-strength materials and larger drill diameters; its design is suited for operations in Alloyed and Unalloyed Steel, Cast Steel, Cast Iron and Hard Plastics, where durability and precise holes are required. Which three drill types should be known for general work? For most workshops, the three basic drill categories are Metal Drills (like the MetavCUT Body Drill), Wood Drills and Masonry/Concrete Drills; each type is optimised in geometry and material for its intended substrate. Why are Twist Drills sharpened? Twist Drills are sharpened to reduce the cross-edge at the tip, which lowers friction and therefore reduces the required feed force; sharpening also improves centring and cutting efficiency so the MetavCUT Body Drill penetrates more easily and produces cleaner holes. Can you use a metal Twist Drill in wood? A Metal Twist Drill such as the MetavCUT Body Drill can be used in wood, but steering is less precise and the finish may be rougher; these drills are easier to re-sharpen and show less aggressive self-feed than specialised wood bits. For which hole depths is the Twist Drill most commonly used? A through-hole in solid material is typically made with a Twist Drill; for diameters up to about 20 mm and hole depths up to roughly 100 mm, the Twist Drill is the most frequently used tool in metalworking and maintenance tasks. Is HSS or HSSE better for workshop drills? The common belief that HSSE is always superior to HSS is not universally valid; when selecting a drill—for example the MetavCUT Body Drill in HSS-G—you should consider specific working conditions to decide whether the higher cost of HSSE is justified.
3.3mm HSS-G Body Drill ,double sided, bright finished - MetavCUT
Karosseriebohrer — Body Drill (Diameter 3.3 mm · 135° Point Angle · Double-sided · Bright Finished · Fully Ground · HSS‑G) The Karosseriebohrer Body Drill is a compact Twist Drill designed for precision drilling in metal using a drilling machine, ideal for thin sheets, bodywork and industrial applications. Double-sided design for extended usability HSS‑G fully ground for precise, clean holes 135° point angle for harder materials Bright finished surface for smooth chip evacuation Faster, more controlled metal drilling for demanding tasks The fully ground HSS‑G geometry of this Body Drill delivers a noticeable increase in efficiency: compared with rolled HSS drills, the ground flute and cutting edges provide up to 40% faster drilling while requiring lower feed forces. This means less operator fatigue and more consistent results when working on alloyed and unalloyed steel, cast materials and hard plastics. The 135° point angle reduces walking on tough surfaces and improves centring, making it especially suitable for stainless steel and other harder workpieces. Reliable double-ended design for workshop flexibility Thanks to the double-sided (double‑ended) configuration, the Karosseriebohrer functions like two drills in one: if one tip becomes blunt, the drill can be reversed and used again, extending tool life and reducing downtime. The short, sturdy design commonly used in bodywork and sheet-metal work offers stable handling in hand drills and bench machines, while the bright finish aids chip flow and visual inspection of the cutting geometry. Application focus — engineered for metal and thin-sheet work This Body Drill is optimised for drilling in metal: legged and unlegged steels, cast steel, cast iron, sintered iron, malleable castings, non-ferrous metals and hard plastics. For best results in industrial or workshop use, pair the drill with appropriate coolant and secure clamping. When used in a hand drilling machine, the ground shank and precision flute geometry promote steadier running and cleaner hole quality even at higher spindle speeds. Practical advantages for professional users The fully ground shaft and precise CNC-style grind deliver high runout accuracy and sharply defined cutting edges, translating into clean, burr‑reduced holes and less rework. Shorter penetration time and reduced thrust mean more efficient production cycles. Users who value repeatable hole quality in bodywork, repair or manufacturing environments will benefit from the drill’s combination of durability and cutting performance. For precision metalworking choose the MetavCUT Karosseriebohrer Body Drill with HSS‑G grind — METAV Werkzeuge offers expert consultation to ensure this Twist Drill matches your application needs; contact us by eMail at info@metav-werkzeuge.com or by phone +49 2822 7131930 and WhatsApp +49 170 2837271 Designation: Karosseriebohrer / Body Drill Brand: MetavCUT Type: Double-sided (double‑ended) Diameter: 3.3 mm Point Angle: 135° Colour: Bright finished Execution: Double-sided Shaft Execution: Fully ground Material: HSS‑G Spiral Length: 10 mm Total Length: 46 mm For Drilling Machine: Drilling Machine (Hand drill) Application: Drills for metal Model Series: Standard Line Packaging Unit: 10 Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ Is the Karosseriebohrer Body Drill suitable for handheld drilling machines? The MetavCUT Karosseriebohrer Body Drill is designed to be used with drilling machines including hand drills; its short, stable double‑ended form and fully ground shank support accurate running in portable equipment, though for maximum tool life and safety a secure clamp and appropriate speed/coolant are recommended. What are Twist Drills used for? Twist Drills, like the Karosseriebohrer Body Drill, are mainly used for machining high‑strength materials and larger diameters; they are easy to regrind and withstand significant stresses. The ground HSS geometry typically enables faster cutting and lower feed forces compared with rolled drills. Which 3 drill types exist? The three primary drill types are: metal drills, wood drills and stone/concrete drills. MetavCUT produces drills optimised for metalworking, such as this Body Drill tailored to sheet and body applications.
3.3mm HSS-G Twist Drill DIN 1897 ,extra short, bright finished, Type N - MetavCUT
Der Spiralbohrer überzeugt durch die Kombination aus HSS-G Geschliffenheit, extra kurzer Ausführung und universeller Zylinderschaft, was für mehr Stabilität, geringere Bruchneigung und effizientes Bohren in Metall sorgt; bestellen Sie den Spiralbohrer direkt über Metav Werkzeuge oder fragen Sie unsere Beratung an. Spiralbohrer von MetavCUT — extra kurze HSS-G Ausführung Der Spiralbohrer ist ein extra kurzer, geschliffener HSS-G Bohrer für präzise Metallbohrungen mit hoher Standzeit. Spiralbohrer »56033-FDA« von MetavCUT Extra kurze Ausführung für enge Platzverhältnisse HSS-G geschliffen: Bis zu 40 % schneller Bohren Spitzenwinkel 135° für härtere Werkstoffe Zylinderschaft: Für normale Bohrfutter universell passend Mehr Stabilität und weniger Bruch bei begrenztem Platz Die extra kurze Ausführung reduziert Hebelwirkung und erhöht die Verdrehungsfestigkeit, wodurch die Gefahr von Bruch und Auslauf verringert wird. Gerade in engen Arbeitsbereichen oder bei Winkelbohrungen ermöglicht die kürzere Gesamtlänge eine sauberere Führung. Durch die geschliffene HSS-G Qualität wird die Vorschubkraft reduziert und die Bohrgeschwindigkeit deutlich gesteigert, was Zeitersparnis und weniger Belastung für die Maschine bedeutet. Effizientes Bohren in Stahl, Guss und Nichteisenmetallen Mit einem Spitzenwinkel von 135° und der Typ-N Normalspirale ist der Bohrer speziell für härtere Werkstoffe ausgelegt. Er eignet sich für legierten und unlegierten Stahl, Gussstahl, Gusseisen, Sintereisen, Temperguss sowie für Nichteisenmetalle und Hartkunststoff. Die geschliffene Schneide sorgt für sauberen Spanabtransport und konstante Lochqualität, wodurch Nacharbeit und Gratbildung minimiert werden. Universelle Anwendung und einfache Handhabung Die Zylinderschaft macht den Bohrer kompatibel mit gängigen Handbohrmaschinen und Dreibackenfuttern, sodass er sich problemlos in Werkstatt und Montage einbinden lässt. Wegen der universellen Schaftform empfiehlt sich bei sehr hohem Drehmoment zusätzlich das sichere Spannen im Bohrfutter beziehungsweise der Einsatz eines Spannfutters, um Durchrutschen zu vermeiden. Die extra kurze Bauform ist ideal für dünnwandige Bleche und Profile. Zielgruppe, Einsatzszenarien und Wirtschaftlichkeit Dieser Bohrer wurde für Handwerk, Instandhaltung und industrielle Kleinserien konzipiert, die präzise Metallbohrungen unter Platzbeschränkung benötigen. Die Kombination aus HSS-G Material und extra kurzer Geometrie reduziert Ausfallzeiten und erhöht die Wirtschaftlichkeit, weil weniger Bruch und damit weniger Nachschub erforderlich sind. Sichern Sie sich den präzisen HSS-G Spiralbohrer von MetavCUT über unseren Shop oder kontaktieren Sie die Metav Beratung per E‑Mail an info@metav-werkzeuge.com bzw. telefonisch unter +49 2822 7131930. Produktmerkmale Artikelnummer: 56033-FDA Marke: MetavCUT Serie: Standard Line Bezeichnung: Spiralbohrer Norm: DIN 1897 Fakten Durchmesser: 3,3 mm Gesamtlänge: 46 mm Spirallänge: 16 mm Spitzenwinkel: 135° Verpackungseinheit: 10 Besonderheiten Material: HSS-G (Hochleistungs-Schnellarbeitsstahl, geschliffen) Ausführung: extra kurz (mehr Stabilität, weniger Bruchneigung) Schaftausführung: Zylinder (Rundschaft, universell passend) Typ: Typ N (Normalspirale für Metall) Farbe: blank Für Bohrmaschine: Handbohrmaschine FAQ Für welche Werkstoffe eignet sich der Bohrer am besten? Der MetavCUT Spiralbohrer in HSS-G Ausführung eignet sich besonders für legierten und unlegierten Stahl, Gussstahl, Gusseisen sowie Nichteisenmetalle; die geschliffene Spitze liefert sauberen Spanabtransport und stabile Bohrbilder. Ist der Bohrer für Handbohrmaschinen geeignet? Ja, die Zylinderschaft macht den Spiralbohrer kompatibel mit normalen Dreibackenfuttern an Handbohrmaschine und Winkelbohrmaschinen; bei sehr hohem Drehmoment ist sicheres Spannen zu empfehlen. Welche Vorteile bringt die extra kurze Ausführung in der Praxis? Die extra kurze Bauform des Spiralbohrers reduziert Hebelwirkung, erhöht die Stabilität und verringert die Bruchneigung, was besonders in engen oder schwer zugänglichen Bereichen Zeit und Material spart. Welchen Spitzenwinkel hat der Bohrer und warum ist das wichtig? Der Spiralbohrer hat einen Spitzenwinkel von 135°, was das Anbohren in härtere Werkstoffe erleichtert und die Anbohrzeit reduziert; das Ergebnis sind präzisere und gratärmere Bohrungen. Wie viele Bohrer sind in einer Verpackungseinheit und wie lautet die SKU? Die Verpackungseinheit beträgt 10 Stück und die Artikelnummer beziehungsweise SKU lautet 56033-FDA.
3.3mm HSS-G Twist Drill DIN 338 ,fully ground, silver - MetavCUT
Der Spiralbohrer von MetavCUT überzeugt durch seine geschliffene HSS-G-Geometrie und den formschlüssigen Sechskant Schaft; schnelle, präzise Metallbohrungen bei reduziertem Anpressdruck sind dadurch realisierbar. Nutzen Sie die Kombination aus Standzeit, Leistungsfähigkeit und einfacher Spannbarkeit für saubere Fertigungsergebnisse. Bestellen Sie das Werkzeug direkt über Metav Werkzeuge oder fragen Sie unsere Beratung bei Bedarf an. Spiralbohrer von MetavCUT (HSS-G, geschliffen) Der Spiralbohrer von MetavCUT ist ein geschliffener HSS-G Bohrer für präzise Metallbohrungen und universelle Werkstattanwendungen mit Sechskant Schaft. Geschliffene HSS-G-Geometrie für saubere Bohrlöcher Sechskant Schaft für schnellen Werkzeugwechsel Geeignet für Stahl, Guss und Nichteisenmetalle DIN 338 Normiert: kurze Spiralbohrer mit Zylinderschaft Spirallänge 35 mm für kontrollierte Spanabfuhr Schnelle, präzise Metallbearbeitung mit reduziertem Kraftaufwand Der geschliffene HSS-G Bohrer liefert scharfe Schneiden und hohe Rundlaufgenauigkeit, was zu sauberen Bohrlöchern in legierten und unlegierten Stahl führt. Durch den CNC Schleifprozess wird die Spanform optimiert, sodass das Werkzeug bis zu 40 % schneller arbeiten kann und dabei etwa 50 % weniger Anpresskraft benötigt. Diese Eigenschaften reduzieren Ermüdung bei stationären und mobilen Bohrvorgängen und verbessern den Durchsatz in der Werkstatt. Praktische Kompatibilität für Werkstatt und Handbetrieb Mit Zylinderschaft in Sechskant Ausführung lässt sich der Bohrer sicher in Schnellwechselhaltern von Akkuschraubern und in klassischen Bohrfuttern spannen. Das macht das Werkzeug besonders geeignet für den Einsatz an Handbohrmaschinen und stationären Säulenbohrmaschinen. Die Kombination aus Sechskant Schaft und passender Spirallänge gewährleistet Formschluss beim Drehmoment und zuverlässige Spanabfuhr bei mittleren Bohrtiefen. Materialeigenschaften und Anwendungshinweise für lange Standzeit Das Material HSS-G (geschliffener Schnellarbeitsstahl) bietet eine gute Balance zwischen Zähigkeit und Schneidhaltigkeit für die Bearbeitung von Stahl, Guss und Hartkunststoff. Beachten Sie, dass geschliffene Ausführungen empfindlicher gegenüber Biegung und Verkantung sind; deshalb ist eine ruhige Spannaufnahme und geeignete Kühlschmierung bei harten Werkstoffen empfohlen. Der Spitzenwinkel von 118° unterstützt saubere Zentrierung auf flachen und leicht gewölbten Oberflächen. Zielgruppe und typische Einsatzfälle in Produktion und Reparatur Dieses Werkzeug wurde für Anwender entwickelt, die wiederholt präzise Metallbohrungen benötigen: Werkstätten, Montagebetriebe und ambitionierte Heimwerker mit hochwertiger Ausstattung. Typische Anwendungsfälle sind Montagebohrungen in Blechen, Reparaturarbeiten an Maschinenteilen sowie präzise Bohrungen in Gusseisen und Temperguss. Durch die Normkonformität nach DIN 338 fügt sich der Bohrer leicht in standardisierte Arbeitsprozesse ein. Empfehlung: Den MetavCUT HSS-G Spiralbohrer über Metav Werkzeuge beziehen, Verfügbarkeit per eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 prüfen und für präzise Werkstattprozesse nutzen. Produktmerkmale Artikelnummer: 57033-FDA Marke: MetavCUT Serie: Standard Line Ausführung: geschliffen Material: HSS-G Norm: DIN 338 Daten Durchmesser: 3,3 mm Gesamtlänge: 85 mm Spirallänge: 35 mm Spitzenwinkel: 118° Verpackungseinheit: 10 Besonderheiten sechskant Schaft: für Schnellwechselhalter und formschlüssige Drehmomentübertragung HSS-G: geschliffener Schnellarbeitsstahl, hohe Schneidhaltigkeit DIN 338: kurze Spiralbohrer mit Zylinderschaft, Norm für Austauschbarkeit und Toleranz geschliffen: CNC Schliff für scharfe Kanten und hohe Rundlaufgenauigkeit FAQ Für welche Materialien ist dieser Bohrer geeignet? Der MetavCUT Spiralbohrer aus HSS-G eignet sich besonders für legierte und unlegierte Stahlarten, Gussstahl, Gusseisen sowie Nichteisenmetalle; die geschliffene Geometrie sorgt für saubere Bohrlöcher bei diesen Werkstoffen. Kann der Bohrer in einer Handbohrmaschine verwendet werden? Ja, der Sechskant Schaft des MetavCUT Spiralbohrers erlaubt das einfache Spannen in Schnellwechselhaltern von Akkuschraubern und auch in normalen Bohrfuttern, wobei auf eine ruhige Führung geachtet werden sollte. Wie beeinflusst die geschliffene Ausführung die Anwendung? Geschliffene HSS-G Bohrer bieten schärfere Schneiden und höhere Rundlaufgenauigkeit, was zu schnellerem Fortschritt führt; sie sind jedoch empfindlicher gegenüber Verkantung und profitieren von stationärem Einsatz und Kühlschmierung. Ist der Bohrer nach einer Norm gefertigt? Ja, der Bohrer entspricht der DIN 338, was kurze Spiralbohrer mit Zylinderschaft klassifiziert und Austauschbarkeit sowie Toleranzen sicherstellt. Welche Vorteile bringt der Sechskant Schaft? Der Sechskant Schaft gewährleistet formschlüssige Drehmomentübertragung und schnellen Werkzeugwechsel, was besonders in der Montage und bei wiederholten Bohrvorgängen Zeit spart.
3.3mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Twist Drill — Short HSS‑G Type N for Drilling Machines, Ø 3.3 mm, 135°, DIN 338, Bright Finished The Twist Drill short Type N from MetavCUT is a precision metal‑working drill designed for drilling machines, offering a 3.3 mm diameter and a 135° tip angle for demanding steel and cast‑metal applications. Short HSS‑G Type N for high stability 3.3 mm diameter for precise pilot holes 135° tip angle for hard materials Fully ground shank for accurate centring Conforms to DIN 338 for metalworking Faster metalworking thanks to ground HSS geometry The HSS‑G construction of this Twist Drill provides a measurable performance advantage: the ground geometry enables up to 40% faster drilling while requiring approximately 50% less feed force than conventional HSS drills. For professionals working with legated and unlegated steels, cast steel and non‑ferrous metals, this means shorter cycle times and less operator effort. The result is more efficient machining without compromising hole quality. Increased stability and precision from the short design Because this tool follows DIN 338 as a short twist drill, the reduced overall length improves stiffness and reduces bending under load. Shorter overhang leads to better concentricity and less chatter, which is especially beneficial when producing tight tolerance holes in hard materials. The compact design therefore supports consistent, repeatable results and reduces scrap rates in workshop environments. Reliable centring and tip design for hard materials The 135° tip angle is optimised for harder workpieces such as stainless steel, reducing walking and improving initial contact. The drill’s Type N normal spiral is the classic metal spiral geometry, suited primarily for metalworking rather than soft timber. A fully ground shank ensures excellent clamping fit and centring in the chuck, while the bright finished surface promotes smooth chip evacuation and visual inspection of wear. Built for professional drilling machines and demanding tasks Compatible with standard drilling machines, this short HSS‑G metal drill is intended for users who require dependable performance when machining steel, castings and technical plastics. Workshops, maintenance crews and metal fabricators benefit from the balance of hardness and toughness offered by the HSS‑G material, making it a practical choice for production and repair tasks where precision and tool life matter. Strong recommendation: choose the MetavCUT HSS‑G short Type N Twist Drill for demanding metalwork—METAV Werkzeuge provides expert, personalised advice if you are unsure whether this tool meets your requirements; contact us by eMail at info@metav-werkzeuge.com, by phone at +49 2822 7131930 or via WhatsApp at +49 170 2837271 Designation: Twist Drill (Spiralbohrer) Brand: MetavCUT SKU: 27033-FDA Type: Type N Material: HSS‑G Diameter: 3.3 mm Tip angle: 135° Overall length: 65 mm Spiral length: 36 mm Execution: short Shaft execution: fully ground Colour / Finish: bright finished Application: Drills for metal For drilling machine: Drilling Machine Model series: Basic Line Norm: DIN 338 Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the Twist Drill used for and which materials is it suitable for? The MetavCUT Twist Drill short Type N is mainly used for machining high‑strength materials and larger diameters; it performs particularly well in legated and unlegated steel, cast steel, cast iron, sintered iron, tempered castings, non‑ferrous metals and hard plastics. Its ground design is easier to sharpen and withstands higher loads. Which three main drill types exist and where does this product fit? There are three principal drill types: Metal Drill, Wood Drill and Stone / Concrete Drill. The MetavCUT Twist Drill is a metal drill (Type N), optimised for metal applications rather than timber or masonry.
3.3mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Twist Drill — Short Type N Metal Drill, 3.3 mm, 135°, HSS‑G, Bright Finished The Twist Drill is a short Type N metal drill designed for precise drilling in hard materials with a 3.3 mm diameter and a 135° tip angle for industrial Drilling Machine applications. Short design for higher stability Sharp CNC‑ground geometry for clean holes 135° tip angle for hard materials Fully ground shank for excellent concentricity Stability and faster machining for demanding metalwork A short design reduces the unsupported length and significantly increases Stability during drilling, which results in less bending and more precise holes in steels and other hard materials. The HSS‑G ground geometry enables up to 40% faster penetration while requiring about 50% less feed force than conventional HSS variants, so machining cycles are shorter and operator effort is reduced. This makes the tool particularly suitable where repeatable, tight‑tolerance holes are required. Built for hard materials with an optimised tip geometry The combination of a 135° tip angle and the classic Type N spiral is optimised for tougher workpieces such as stainless steels and cast materials. A larger tip angle shortens the time to break through the surface and improves centring on hard substrates. The term HSS‑G indicates a ground flute geometry produced by CNC grinding, which creates very sharp cutting edges and high roundness accuracy—advantages that pay off when working with alloyed and unalloyed steels. Dimensions and machine compatibility for practical workshop use With a 3.3 mm diameter, a Spiral Length of 36 mm and an Overall Length of 65 mm, this short twist drill fits standard chucks on conventional Drilling Machines and is the right choice where lateral rigidity is essential. The Fully Ground Shank ensures excellent concentricity in the chuck, reducing run‑out and vibration. The bright finished surface aids chip evacuation and visual inspection of the cutting geometry. Who benefits and where to deploy this professional tool Metalworkers, maintenance teams and precision toolrooms appreciate the Profi Line quality of this MetavCUT product when producing repeatable holes in metal components. The short, ground design is ideal for stationary or portable Drilling Machine operations where stability, hole quality and efficient cycle times matter. For tasks demanding high edge quality and consistent diameter, this twist drill provides the right balance of toughness and sharpness. Choose the MetavCUT Profi Line Twist Drill for reliable, high‑precision metal drilling and contact METAV Werkzeuge for personalised technical advice at info@metav-werkzeuge.com or phone +49 2822 7131930 Designation: Twist Drill Brand: MetavCUT SKU: 48033-FDA Diameter: 3.3 mm Spiral Length: 36 mm Overall Length: 65 mm Tip Angle: 135° Type: Type N Execution: Short Material: HSS‑G Shank Execution: Fully Ground Surface Finish: Bright Finished Application: Drills for Metal Model Series: Profi Line For Drilling Machine: Drilling Machine Norm: DIN 338 Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ For what is the Twist Drill used? The MetavCUT Twist Drill (Type N) is primarily applied to machining high‑strength materials and larger drilling diameters in metalworking. This short, ground form is easy to re‑grind and withstands higher loads, which makes it suitable for steels, cast irons and non‑ferrous metals while delivering clean, precise holes. Which 3 drill types exist? In general drill categorisation there are three main types: metal drills, wood drills and stone/concrete drills. The MetavCUT Twist Drill (Type N) belongs to the metal drill category and is optimised for machining metals rather than timber or masonry.
3.3mm HSS-G Twist Drill DIN 338 ,short, TIN-coated, Type N - MetavCUT
Twist Drill — Type N short, Diameter 3.3 mm, 135° tip, TiN-coated, HSS-G, short, DIN 338 The Twist Drill short Type N TiN-coated is a precision drill for use in a Drilling Machine, designed for accurate metalworking in demanding shop and industrial environments. Short design for higher drilling stability 135° tip angle for hard metal entry TiN-coated for extended tool life Fully ground HSS-G for precise, clean holes Conforms to DIN 338 for short solid shank drills Outstanding accuracy and faster metalworking thanks to reduced overhang A short Twist Drill with a reduced overhang minimises bending and vibration, delivering higher stability and significantly improved concentricity when drilling metals. The shorter projection from the chuck helps to achieve clean, round holes even at higher spindle speeds. For tasks where precision matters — such as component fitting or pilot-hole preparation — this compact geometry reduces the risk of chatter and tool breakage while enabling more consistent hole diameters. Coating and material that extend lifetime under load The combination of HSS-G substrate and TiN coating offers a clear performance advantage when machining steels and non-ferrous alloys. HSS-G (ground high-speed steel) provides sharp cutting edges and excellent edge retention, while the TiN (Titanium Nitride) surface reduces friction and wear, improving heat resistance. In practice, this means longer intervals between regrinds and more holes per tool in both alloyed and unalloyed steel, cast materials and hard plastics when used with appropriate cooling. Designed application and who benefits most from this tool Manufacturers, toolrooms and maintenance workshops that require reproducible, accurate holes will value the short Type N geometry and fully ground Shank for dependable performance. This Twist Drill is particularly suitable for drilling into legierten und unlegierten Stahl, Gusseisen, Kupfer, Bronze und Hartkunststoff when paired with adequate coolant. Users seeking a balance of service life and re-sharpenability will appreciate the ability to resharpen ground flutes while maintaining excellent runout characteristics on stationary and portable machines. Practical advantages explained: tip angle, grind and standards A 135° tip angle is optimised for harder materials and reduces the initial cutting forces needed to penetrate tough surfaces, improving centering and lowering the chance of walk-off. The designation fully ground (HSS-G) indicates that the flutes and geometry were produced by CNC grinding rather than rolling, resulting in sharper edges and superior hole finish — albeit with a slightly increased brittleness that recommends stationary setups and coolant use. Compliance with DIN 338 assures standardised lengths and tolerances for short solid shank drills, simplifying tool selection and stocking. Strong recommendation: MetavCUT precision short Twist Drill for metalworking tasks where stability and lifetime matter — if uncertain whether this tool matches specific requirements, METAV Werkzeuge offers expert advice and application support; contact via email at info@metav-werkzeuge.com, by phone +49 2822 7131930, or WhatsApp +49 170 2837271 for personalised guidance and technical consultation. Technical data Designation: Twist Drill (Short) Brand: MetavCUT SKU: 46033-FDA Diameter: 3.3 mm Overall length: 65 mm Spiral length: 36 mm Tip angle: 135° Type: Type N Material: HSS-G Shank execution: Fully ground Coating/Colour: TiN-coated For drilling machine: Drilling Machine Model series: Standard Line Norm: DIN 338 Application: Drills for metal Ausführung: short Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the MetavCUT Twist Drill (Type N) primarily used for? The MetavCUT Twist Drill Type N is primarily used for drilling metal; it excels in machining alloyed and unalloyed steel, cast irons and non-ferrous metals when employed in a Drilling Machine with suitable cooling to reduce wear. What is a Twist Drill used for? A Twist Drill is mainly applied to the machining of high-strength materials and larger drill diameters. This shape is easy to regrind and withstands higher loads. When used with appropriate coolant the TiN-coated HSS-G variant significantly reduces friction and wear, extending tool life. Which three drill types exist? The three primary drill types are Metal drills, Wood drills and Masonry/Concrete drills. The MetavCUT Twist Drill belongs to the Metal drill category and is optimised for metalworking applications.
3.3mm HSS-G Twist Drill DIN 338 ,short, TIN-coated, Type N - MetavCUT
Introducing the Twist Drill — Short Type N, 3.3 mm, TIN-coated, HSS-G, 135° (MetavCUT) The Twist Drill short Type N is a precision metalworking drill designed for use with a Hand Drill or Drilling Machine and ideal for accurate holes in alloyed and unalloyed steel. Short design for higher stability and precision TIN-coated surface for reduced wear and friction Fully ground HSS-G shank for faster cutting 135° point angle for hard materials such as stainless steel Conforms to DIN 338 for short twist drills Higher precision through reduced overhang and robust geometry A shorter overall length delivers tangible benefits during machining: the short Twist Drill minimises cantilever action and therefore reduces vibration and tool deflection. This results in more concentric holes and improved surface finish when drilling metal. For users who require consistent hole quality in demanding jobs, the reduced length directly translates into fewer reject parts and less rework. Longer tool life and reduced friction thanks to TIN coating The TIN-coated surface (Titanium Nitride) lowers friction and increases thermal resistance during cutting, which slows wear on the cutting edges. Combined with the HSS-G substrate, this coating is particularly effective when drilling alloyed and unalloyed steel, cast iron and copper alloys. The result is extended tool life under appropriate cooling and the ability to maintain cutting performance for longer production runs. Faster penetration with a fully ground geometry Because the flute geometry is produced by precision grinding, the fully ground HSS-G Twist Drill offers sharper cutting edges and higher runout accuracy than rolled variants. This enables up to 40% faster drilling rates and requires significantly less thrust force, improving machine and operator efficiency when working with tougher materials. For workshop and industrial environments, this means higher throughput with less operator fatigue. Application range and recommended use Designed as a Type N (normal spiral) drill, this short Twist Drill is optimised for metalworking operations on materials such as steel, cast iron, sintered iron, copper, bronze and hard plastics. The 135° point angle reduces initial entry forces and improves centring for hard workpieces like stainless steel. Use with adequate cooling and secure clamping is recommended to prevent premature tool wear or breakage. Strong recommendation: Select the MetavCUT Twist Drill in HSS-G with TIN coating for reliable, precision metal drilling — for tailored technical advice contact METAV Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930, WhatsApp +49 170 2837271 Designation: Twist Drill (Short) Brand: MetavCUT SKU: 41033-FDA Diameter: 3.3 mm Point angle: 135° Type: Type N Colour/Coating: TIN-coated Execution: Short Shank finish: Fully ground Material: HSS-G Spiral length: 36 mm Overall length: 65 mm For drilling machine: Drilling Machine / Hand Drill Standard: DIN 338 Packaging unit: 10 pieces Applications: Drills for metal Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What are Twist Drills used for and which materials suit this MetavCUT Twist Drill? Twist Drills like the MetavCUT Twist Drill are primarily used for machining holes in metal; this short Type N HSS-G drill with TIN coating is suitable for alloyed and unalloyed steel, Tempered Cast Iron, Gusseisen, Neusilber, Copper, Bronze and Hard Plastics, offering good lifetime under appropriate cooling. Which three drill types are commonly distinguished? Common drill categories include Metal drill bits, Wood drill bits and Masonry/Concrete drill bits; the MetavCUT Twist Drill belongs to the metal drill class and is optimised for that application.
3.3mm HSS-G Twist Drill DIN 340 ,long, bright finished - MetavCUT
Twist Drill — Long HSS‑G 3.3 mm, 135° tip, Bright Finished (DIN 340) by MetavCUT The Twist Drill is a long‑version HSS‑G drill designed for precise, deep hole drilling in metal and for use with Drilling Machines and hand drills. Long design for deep or recessed holes HSS‑G ground for sharp, precise cutting 135° tip angle for harder materials DIN 340 long‑version geometry Suitable for Drilling Machines and hand drills Durable HSS‑G material for demanding metal work The long‑version HSS‑G construction provides a robust combination of hardness and cutting performance for machining steels and other metal materials. With the DIN 340 specification the drill is intended for deeper holes where stability and axial runout resistance matter. The ground flute geometry yields cleaner holes and improved concentricity, which reduces rework and ensures consistent fits for dowels, bushings or threaded inserts. Long format for deep or hard‑to‑reach bores A longer overall length with a spiral length of 69 mm and Total Length 106 mm enables access to bores that standard drills cannot reach without extensions. This extended design makes the tool especially suitable when the drilling point is recessed or the workpiece geometry limits straight‑in access. The reduced need for extensions or auxiliary tooling speeds up setup and keeps the machining process more efficient. Optimised geometry and tip for harder materials With a 135° tip angle the tool penetrates tougher materials with less tendency to wander and provides a flatter tip shape that suits stainless and alloyed steels. The fully ground shank and flute geometry support higher precision and surface quality in the hole. As a result, feed forces can be lower and tool life improved under appropriate cooling and machining parameters. Target users and typical applications Engineers, workshop technicians and maintenance professionals benefit from the long HSS‑G design when drilling in legated and unlegated steel, cast materials and hard plastics where clean holes and accurate positioning are required. The MetavCUT long Twist Drill suits fabrication shops, toolrooms and repair operations needing reliable drills for medium‑to‑deep metal bores. Choose the MetavCUT long HSS‑G Twist Drill for dependable deep‑hole performance and contact METAV Werkzeuge for tailored technical advice — eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 | WhatsApp: +49 170 2837271 Technical Specifications Designation: Twist Drill Brand: MetavCUT SKU: 53033-FDA Diameter: 3.3 mm Tip angle: 135° Execution: long Colour: Bright finished Material: HSS‑G Standard: DIN 340 Total length: 106 mm Spiral length: 69 mm Shank finish: fully ground Model series: Standard Line Application: Drills for metal Suitable for: Drilling Machine / Hand Drill Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the MetavCUT Twist Drill used for? The MetavCUT Twist Drill (Twist Drill) is primarily applied to machining high‑strength materials and larger drill diameters; its design allows straightforward resharpening and it endures higher loads, making it suitable where robust, repeatable metal drilling is required. Which three drill types exist? Drill types commonly distinguished are Metal drills, Wood drills and Stone/Concrete drills; the MetavCUT Twist Drill belongs to the Metal drill category and is optimised for metalworking tasks.
3.4mm HSS Twist Drill DIN 338 ,short, roll forged, black, Type N - MetavCUT
Robuste HSS-Konstruktion, kurze Ausführung nach DIN 338 und ein präziser 3,4 mm Durchmesser sorgen für stabile, wirtschaftliche Metallbohrungen. Bestellen Sie den Spiralbohrer direkt über Metav Werkzeuge oder fragen Sie unsere Beratung bei Bedarf an. Spiralbohrer von MetavCUT (kurzer HSS-Bohrer, Typ N) Der Spiralbohrer ist ein kurzer HSS-Bohrer für präzise Metallbohrungen mit Handbohrmaschine und stationären Werkzeugmaschinen. Kurze Ausführung nach DIN 338 für hohe Stabilität HSS-Material für legierten und unlegierten Stahl 3,4 mm Durchmesser für präzise Metallbohrungen 39 mm Spirallänge für sichere Späneförderung Zylinderschaft, geeignet für Handbohrmaschine Stabilität und Präzision bei Metallbohrungen Die kurze Bauart dieses Bohrers reduziert die Auskragung und erhöht dadurch die Stabilität beim Anbohren. Gefertigt aus HSS bietet der Bohrer eine gute Elastizität und weniger Bruchrisiko bei Bohrungen unter 6 mm, was gerade bei Serienarbeiten Zeit und Ausschuss spart. Die Einhaltung der DIN 338 gewährleistet zudem standardisierte Abmessungen und Kompatibilität mit gängigen Spannfuttern, sodass die Maschineinsatzzeit effektiv genutzt wird. Passende Anwendungen und Maschinenkompatibilität Als Bohrer des Typ N eignet sich das Werkzeug vor allem für Metall wie Stahl, Gusseisen sowie Nichteisenmetalle und Kunststoffe. Durch die kurze Ausführung ist der Einsatz sowohl an stationären Werkzeugmaschinen als auch an handgeführten Bohrmaschinen möglich. Für Anwender bedeutet das: mehr Flexibilität in Werkstatt und Montage, ohne auf Präzision verzichten zu müssen. Die Verarbeitung ist auf Dauerbelastung ausgelegt, was die Wirtschaftlichkeit erhöht. Praxistipps für saubere Ergebnisse und lange Lebensdauer Ein Spitzenwinkel von 118° sorgt für einfaches Zentrieren und sauberen Spanabtrag in den meisten Werkstoffen. Für optimale Ergebnisse empfiehlt sich ein Vorstechen bei glänzenden Oberflächen und angemessene Schnittgeschwindigkeit für 3,4 mm Bohrungen. Kühlung und regelmäßiges Nachschleifen verlängern die Standzeit, während korrektes Spannfutterspiel die Genauigkeit erhält. So lassen sich saubere Bohrbilder bei reduziertem Werkzeugverschleiß erzielen. Verpackung, Abmessungen und Einsatzvorteile Der kurze Spiralbohrer ist in praktischer Verpackungseinheit zu 10 Stück erhältlich und bietet mit einer Gesamtlänge von 70 mm und einer Spirallänge von 39 mm eine gute Balance zwischen Handhabung und Arbeitstiefe. Die schwarze Oberfläche erleichtert die Erkennung im Werkzeugsortiment. Für Einkäufer bedeutet das: einfache Lagerung, schnelle Verfügbarkeit und planbare Nachbestellungen durch klare SKU-Angaben. Empfehlung: Setzen Sie auf den robusten HSS-Kurzspiralbohrer von MetavCUT für präzise Metallarbeiten; bei Fragen zur Auswahl oder zur Anwendung kontaktieren Sie Metav Werkzeuge per Email info@metav-werkzeuge.com oder Telefon +49 2822 7131930. Technische Daten Artikelnummer: 40034-FDA Marke: MetavCUT Bezeichnung: Spiralbohrer Ausführung: kurz Typ: Typ N Farbe: schwarz Werte Durchmesser: 3,4 mm Gesamtlänge: 70 mm Spirallänge: 39 mm Spitzenwinkel: 118° Verpackungseinheit: 10 Besonderheiten Material: HSS Norm: DIN 338 Schaft: Zylinderschaft Geeignet für: Handbohrmaschine SKU: 40034-FDA FAQ Wie eignet sich der Spiralbohrer für verschiedene Metalle? Der Spiralbohrer von MetavCUT (Spiralbohrer, Typ N, SKU 40034-FDA) ist aus HSS gefertigt und eignet sich gut für legierten und unlegierten Stahl, Gusseisen sowie Nichteisenmetalle; bei sehr harten Werkstoffen sind angepasste Schnittparameter empfehlenswert. Ist der Bohrer für Handbohrmaschinen geeignet? Ja, der kurze Spiralbohrer von MetavCUT ist mit Zylinderschaft ausgeführt und eignet sich für den Einsatz an Handbohrmaschinen sowie an stationären Werkzeugmaschinen. Welche Rolle spielt der Spitzenwinkel von 118°? Der Spitzenwinkel von 118° des MetavCUT Spiralbohrers sorgt für gutes Zentrierverhalten und sauberen Spanabtrag in Standardmetallen, was insbesondere bei Durchmessern wie 3,4 mm zu präzisen Ergebnissen führt. In welcher Verpackungseinheit wird der Bohrer geliefert? Der Spiralbohrer von MetavCUT (Bezeichnung Spiralbohrer, SKU 40034-FDA) wird in einer praktischen Verpackungseinheit zu 10 Stück angeboten, ideal für Werkstattbedarf und kleinere Serien. Wie lang ist die Spirallänge und warum ist das wichtig? Die Spirallänge beträgt 39 mm; diese Länge unterstützt eine sichere Späneförderung bei typischen Metallbohrungen und reduziert die Gefahr von Verstopfungen bei Hand- und stationärem Gebrauch.
3.4mm HSS-G Body Drill ,double sided, bright finished - MetavCUT
Body Drill (Karosseriebohrer) — 3.4 mm, 135° Tip, HSS-G, Double‑Sided, Bright Finished The Body Drill is a double‑sided Twist Drill by MetavCUT for metalworking in Drilling Machines, designed for precise holes in sheet and solid materials. Body Drill 3.4 mm Diameter for metal applications Double‑Sided design for continued use when one tip dulls HSS‑G Material for sharp cutting and high roundness Fully ground shank for accurate runout and precise holes 135° Tip Angle optimized for harder materials like stainless steel High performance through advanced HSS‑G geometry This Twist Drill uses HSS‑G Material and a 135° Tip Angle, delivering a clear benefit: reduced bit walking and improved centring on hard surfaces. The Ground flute geometry produces very sharp cutting edges and excellent Roundness, which supports faster, cleaner holes in Steel and Cast Iron. For users who demand repeatable precision, this configuration minimises rework and improves hole quality with less manual alignment. Durable, practical design for workshop use A Double‑Sided execution means the tool functions like two bits in one: if one tip becomes blunt, the bit can be reversed and the second tip used immediately. The Fully Ground Shank ensures low runout in Chucks and improved concentricity, which is particularly useful for bodywork and sheet‑metal tasks. This short, stable design is well suited to operations where compactness and rigidity reduce vibration and improve finish. Targeted applications and material suitability Engineered for metalworking, the drill is recommended for alloyed and unalloyed Steel, Cast Iron, Non‑Ferrous Metals and Hard Plastics. Its geometry makes it a reliable choice for technicians working on automotive body panels, fabrication shops and maintenance tasks. When the task demands clean holes in tougher substrates, this Twist Drill offers the necessary cutting geometry and rigidity to meet professional expectations. Handling advice to maximise tool life and hole quality To achieve optimal results with this Body Drill, apply appropriate cutting fluid and moderate feed to avoid excessive heat; the Ground construction yields sharp edges but can be more brittle than rolled tools. Using a Drill Press or stable Drilling Machine is advisable for deeper or critical holes. The 135° Tip reduces initial penetration forces and improves centring on hard materials, so adjusting feed and speed to the workpiece increases lifetime and hole quality. We recommend MetavCUT’s Body Drill for demanding metalwork — for personalised technical advice or to check suitability for specific applications please contact METAV Werkzeuge: info@metav-werkzeuge.com | +49 2822 7131930 | WhatsApp +49 170 2837271 Bezeichnung: Body Drill Marke: MetavCUT SKU: 58034-FDA Label: Karosseriebohrer Ausführung: double sided Farbe: bright finished Für Bohrmaschine: Drilling Machine Spiral Length: 10 Spitzenwinkel: 135° Durchmesser: 3,4 Gesamtlänge: 46 Material: HSS-G Schaft Ausführung: fully ground Modellserie: Standard Line Anwendung: Drills for metal Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What is the best use for the Body Drill from MetavCUT and which machines suit it? The MetavCUT Body Drill (Twist Drill) is designed primarily for metalworking and is best used in a stable Drilling Machine or Drill Press; it performs well on sheet and solid metal components and offers improved centring due to its geometry. Can the MetavCUT Body Drill (Twist Drill) be used for different metals and plastics? Yes, the MetavCUT Body Drill is suitable for alloyed and unalloyed Steel, Cast Iron, Non‑Ferrous Metals and Hard Plastics; its HSS‑G construction and 135° Tip Angle are chosen to handle a variety of tougher materials effectively. For what is a Twist Drill used? A Twist Drill is mainly applied when machining high‑strength materials and larger diameters. The design is relatively easy to grind and withstands higher loads, making it suitable for bodywork and thin‑sheet holes. Which three drill types exist? There are Metal Drills, Wood Drills and Stone/Concrete Drills, each optimised in geometry and cutting edge for their respective material groups. Why are Twist Drills sharpened at the tip? Sharpening the tip reduces the cross‑cut at the point of the Twist Drill, significantly lowering friction and the required feed force while improving the bit’s ability to centre in the workpiece. Can you drill wood with a Twist Drill? A Metal Drill can be used in wood, but guidance and finish are inferior compared with dedicated Wood Drills. Metal Drill bits are easier to resharpen and have lower self‑feed tendencies. For which drilling depths is the Twist Drill the most used tool? A solid bore is typically made with a Twist Drill. For diameters up to 20 mm and drilling depths up to 100 mm, the Twist Drill is the most frequently used tool. Is HSS or HSSE better? The common assumption that HSSE steels are inherently superior to standard HSS is incorrect; the decision should be based on actual working conditions and whether they justify the higher price of HSSE for the intended application.
3.4mm HSS-G Twist Drill DIN 1897 ,extra short, bright finished, Type N - MetavCUT
Twist Drill Type N — 3.4 mm, 135° Point Angle, Extra Short, Bright Finished, HSS‑G (DIN 1897) by MetavCUT The Twist Drill Type N is an extra‑short HSS‑G drill bit designed for Hand Drilling Machines, optimised for precise metalworking in tight spaces. Extra‑short design for greater stability 135° point angle for Harder Materials HSS‑G: up to 40% faster drilling Cylindrical shank fits standard chucks DIN 1897 compliant for consistent fit Faster metal drilling with lower feed force The Twist Drill delivers high efficiency when working with alloyed and unalloyed Steel, Cast Steel, Cast Iron, Sintered Iron, Tempered Iron, Non‑Ferrous Metals and Hard Plastics. Thanks to its HSS‑G material and the ground geometry, drilling can be performed up to 40% faster while requiring significantly less axial force. This means shorter cycle times and reduced operator fatigue when performing repetitive holes in demanding materials. Extra‑short geometry increases stability and reduces breakage The extra‑short execution offers a shorter overall length and reduced flute length compared with standard DIN 1897 bits, which improves torsional resistance and lowers the risk of breakage. This design is particularly advantageous for drilling in thin‑walled components or when working in confined setups where a long tool would be impractical. The compact geometry supports controlled chip evacuation and steadier hole starts. 135° point angle and Type N spiral explained A 135° point angle is suited for harder workpiece materials because it reduces the tendency to wander and shortens the initial bite time. The Type N designation denotes the classic normal spiral for metalworking; it is designed for efficient chip removal in metal and stable machining of tougher alloys. For users less familiar with these terms: the point angle determines entry behaviour, and a larger angle generally improves centring and reduces required thrust for hard materials. Universal shank and compatibility with hand drills The cylindrical shank ensures compatibility with standard three‑jaw chucks, offering universal clamping for workshop and maintenance applications. As a result, the bit is well suited to Hand Drilling Machines and Angle Drills. Note that a smooth round shank can be more prone to slipping under very high torque compared with keyed or hex shanks; use appropriate chuck clamping to prevent slippage. Who benefits from this short HSS metal drill This short Twist Drill is aimed at technicians, mechanics and maintenance personnel who need reliable, fast holes in metal under space constraints. It is a practical choice for fabricators working with sheet metal, profile sections and machine repair tasks where a robust, short tool reduces vibration and breakage risk. For hobbyists, it offers easier handling when access to the workpiece is restricted. MetavCUT recommends this Type N Twist Drill for precision metalworking in confined setups — for expert guidance and to confirm suitability contact METAV Werkzeuge: 📧 info@metav-werkzeuge.com; ☎️ +49 2822 7131930; ✔️ WhatsApp +49 170 2837271 Designation: Twist Drill Marke: MetavCUT SKU: 56034-FDA Diameter: 3.4 mm Point Angle: 135° Execution: Extra short Colour / Finish: Bright finished Material: HSS‑G Type: Type N Shaft Design: Cylindrical shank Overall Length: 46 mm Spiral Length / Flute Length: 16 mm Applicable Machine: Hand Drilling Machine (Drilling Machine) Application: Drills for metal Standard: DIN 1897 Model Series: Standard Line Hersteller: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; info@metav-werkzeuge.com FAQ What materials is the MetavCUT Twist Drill Type N best suited for? The MetavCUT Twist Drill Type N is primarily intended for metalworking and performs well in alloyed and unalloyed Steel, Cast Steel, Cast Iron, Sintered Iron, Tempered Iron, Non‑Ferrous Metals and Hard Plastics; its HSS‑G composition and Type N spiral optimise chip removal and tool life in these materials. Can the Twist Drill be used in an angle drill or only in straight hand drills? The Twist Drill with a cylindrical shank is designed to be clamped in standard three‑jaw chucks, so it is compatible with both straight Hand Drilling Machines and many Angle Drills; ensure secure clamping to avoid slippage under higher torque. For what is a Twist Drill used? It is mainly applied to the machining of high‑strength workpieces and larger drill diameters. The Twist Drill geometry is easy to regrind and withstands higher loads. Which three drill types exist? There are Metal drills, Wood drills and Stone/Concrete drills. Why are Twist Drills sharpened (pointed)? Sharpening reduces the cross‑cut at the tip of the Twist Drill, which significantly lowers friction and therefore requires lower feed forces while improving centring in the workpiece. Can you drill wood with a Twist Drill? A Metal drill can be used in wood, but guidance is poorer and the hole finish is less clean; however, such bits are easier to resharpen and show lower self‑feeding tendency. For which drill depths is the Twist Drill most used? A through hole in solid material is typically performed with a Twist Drill. For diameters up to 20 mm and drill depths up to 100 mm, the Twist Drill is the most frequently used tool. Is HSS or HSSE better? The common belief that HSSE steels are categorically superior to standard HSS is incorrect; consider your working conditions carefully to decide whether the higher cost of HSSE is justified.
3.4mm HSS-G Twist Drill DIN 338 ,short, bright finished, Type N - MetavCUT
Die Kombination aus kurzer Ausführung, HSS‑G Geschliffenem Material und dem 135° Spitzenwinkel sorgt für hohe Stabilität, schnelle Vorschübe und saubere Metallbohrungen; bestellen Sie den Spiralbohrer direkt über Metav oder fragen Sie bei Bedarf die technische Beratung an. Spiralbohrer von MetavCUT, Typ N, 3,4 mm Der Spiralbohrer ist als kurze Ausführung nach DIN 338 konzipiert und eignet sich für präzise Metallbohrungen an stationären und Handmaschinen. Kurze Ausführung für höhere Stabilität Geschliffenes HSS‑G für schnellere Schnittgeschwindigkeit Spitzenwinkel 135° für harte Werkstoffe Normgerechte Fertigung nach DIN 338 Zylinderschaft, geeignet für Handbohrmaschine Präzision und Stabilität bei Metallbohrungen Dank der kurzen Auskraglänge reduziert sich das Risiko von Durchbiegung und Vibration, wodurch das Bohrbild deutlich präziser ausfällt. Diese Eigenschaft macht den Bohrer besonders geeignet für präzise Bohrungen in legiertem und unlegiertem Stahl sowie in Gusswerkstoffen. Wer Wert auf wiederholgenaue Bohrungen legt, profitiert von der gesteigerten Rundlaufgenauigkeit und der höheren Standzeit bei moderater Kühlung. Materialqualität und Schnittleistung erklären Die HSS‑G Ausführung bedeutet, dass die Geometrie durch Schleifen erzeugt wurde, was scharfe Schneiden und saubere Spanabfuhr ermöglicht. Geschliffene Bohrer bohren laut Herstellerangaben bis zu 40 % schneller und benötigen etwa 50 % weniger Anpresskraft gegenüber herkömmlichen HSS‑Bohrern, was die Arbeitseffizienz erhöht und die Maschinenbelastung reduziert. Der Begriff HSS‑G steht für Schnellarbeitsstahl, geschliffen, und eignet sich besonders für harte Werkstoffe, sofern Kühlung eingesetzt wird. Einsatzbereiche, Maschinenwahl und Zielgruppe Die kurze Ausführung dieses Werkzeugs ist ideal für Werkstätten, Montagebetriebe und Präzisionsanwender, die sowohl mit stationären Säulenbohrmaschinen als auch mit kräftigen Handbohrmaschinen arbeiten. Für Benutzer, die in Stahl, Gusseisen oder Hartkunststoff bohren, bietet der Spiralbohrer eine robuste Lösung. Bei sehr tiefen Bohrungen oder hochgehärteten Materialien empfiehlt sich die Nutzung spezialisierter Vollhartmetallwerkzeuge oder Mehrstufenaufbohrverfahren. Hinweise zur Anwendung und zum Spitzenwinkel Der 135° Spitzenwinkel reduziert das Ausbrechen beim Anbohren härterer Werkstoffe und verkürzt die Anbohrzeit. Bei der Materialwahl ist zu beachten, dass geschliffene Bohrer empfindlicher gegen seitliche Belastung sind; deshalb ist ein zentrisches Anspitzen oder das Vorbohren bei größeren Durchmessern zu empfehlen. Bei unsachgemäßer Handhabung kann die Bruchgefahr steigen, daher ist kontrollierte Kühlung und moderate Vorschubkraft ratsam. Empfehlung: Den geschliffenen HSS‑G Spiralbohrer von MetavCUT für präzise Metallbearbeitung wählen und bei Fragen die technische Beratung von Metav per eMail info@metav-werkzeuge.com oder Telefon +49 2822 7131930 kontaktieren Produktmerkmale Fakten Durchmesser: 3,4 mm Gesamtlänge: 65 mm Spirallänge: 36 mm Spitzenwinkel: 135° Verpackungseinheit: 10 Besonderheiten Artikelnummer: 48034-FDA Marke: MetavCUT Serie: Profi Line Material: HSS-G Norm: DIN 338 Typ: Typ N Schaft: geschliffen Ausführung: kurz Farbe: blank Für Bohrmaschine: Handbohrmaschine FAQ Welche Werkstoffe lassen sich mit dem Spiralbohrer von MetavCUT sicher bearbeiten? Der Spiralbohrer von MetavCUT in HSS‑G Ausführung eignet sich für legierten und unlegierten Stahl, Gussstahl, Gusseisen, Sintereisen sowie Nichteisenmetalle und Hartkunststoff; bei harten Werkstoffen verbessert der 135° Spitzenwinkel die Anbohrleistung. Ist der Bohrer für Handgebrauch an Akkubohrern geeignet? Ja, der Zylinderschaft und die kurze Ausführung machen den Spiralbohrer von MetavCUT für kräftige Handbohrmaschinen geeignet, wobei kontrollierte Vorschubkraft und Kühlung empfohlen werden. Warum ist geschliffen (HSS‑G) besser für Metall als gewalzte Bohrer? Geschliffene HSS‑G Bohrer bieten schärfere Kanten und höhere Rundlaufgenauigkeit, was saubere Bohrlöcher in Metall ermöglicht; der Nachteil ist eine höhere Sprödigkeit, daher ist stationärer Einsatz mit Kühlung vorteilhaft. Gibt es eine Norm, die die Bauform dieses Bohrers beschreibt? Ja, die Fertigung orientiert sich an der Norm DIN 338, die kurze Spiralbohrer mit Zylinderschaft klassifiziert und Dimensionen sowie Ausführungen definiert. Welche SKU hat dieser Spiralbohrer, falls Ersatz benötigt wird? Die Artikelnummer lautet 48034-FDA, Marke MetavCUT, Serie Profi Line; diese Informationen helfen bei Nachbestellung und technischen Rückfragen.
High-performance drill bits for demanding production
Drill bits designed for industrial manufacturing where precision, repeatability and tool life are decisive. Based on a spectrum from HSS and kobalt-alloyed hss-e for universal use to solid carbide drills for high-speed, high-precision serial production, this range covers applications from general engineering to automotive supplier work.
Why these drill bits are essential in the workshop and on the machining centre
Function and behaviour:
- primary use: creating accurate cylindrical holes
- typical machines: CNC machining centres, lathes and drill presses
- key design aspects: optimised chisel edge, defined point angles, flute geometry for reliable chip evacuation
Technical advantages and process benefits:
- reduced feed forces through optimised point geometry
- improved heat control with advanced coatings and, where specified, internal coolant supply
- extended tool life using solid carbide variants and multilayer coatings such as TiN / TiAlN
- process security on challenging materials thanks to tailored materials and geometries
Concrete benefits that boost productivity and quality
- predictable tool life and fewer tool changes, lowering machine downtime
- stable hole quality and consistent tolerances across long runs
- efficient chip control and thermal management for safe deep-hole and hardened-material drilling
- suitability across a wide material range, reducing the need for multiple specialised tools
Metav as a reliable partner for high-precision tooling
Metav combines decades of sector expertise with a broad, dependable offering from its Emmerich facility. With over 48,000 customers and more than 250,000 products, Metav positions its range of drill bits, twist drills and indexable drills as a practical, quality-first choice for procurement managers and production engineers seeking dependable supply and technical competence.
Technical data (at a glance)
- material: HSS, kobalt-alloyed hss-e, solid carbide
- coatings: TiN, TiAlN, advanced nanocoatings
- coolant option: internal coolant feed where specified
- typical applications: mild steel, high-alloy stainless steel, cast iron, non-ferrous metals, technical plastics, hardened materials (use solid carbide variants)
- tool types available: twist drills, solid carbide drills, indexable drills, centre and pilot drills, step drills
FAQ
What is the difference between hss and solid carbide drill bits?
HSS drill bits offer toughness and resistance to breakage for general machining, while solid carbide drills provide higher wear resistance and are the preferred choice for high-speed, high-volume machining and hardened materials.
Which coatings improve tool life for industrial drilling?
Coatings such as TiN and TiAlN increase surface hardness and thermal stability; when combined with the correct drill geometry and, if available, internal coolant, they significantly extend the service life of drill bits.
Can these drill bits be used on CNC machining centres for deep holes?
Yes. Drill bits designed with optimised flute geometry and internal coolant supply are suited to deep-hole machining on CNC machining centres, ensuring controlled chip evacuation and heat management.
How should I choose between twist drills, solid carbide drills and indexable drills?
Select twist drills for general-purpose drilling, solid carbide drills for high-speed and hardened-material applications, and indexable drills for large-diameter holes where insert changes offer economic advantages.
Why choose Metav for drill bits and drilling solutions?
Metav offers a comprehensive selection of drill bits, twist drills and indexable drills combined with sector expertise, centralised supply from Emmerich and proven reliability across thousands of industrial customers.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com